import testlib
from testlib import assertEqual, assertNotEqual, assertIn, assertNotIn
from testlib import assertGreater, assertRegexpMatches, assertLess
-from testlib import GdbTest, GdbSingleHartTest, TestFailed, assertTrue
+from testlib import GdbTest, GdbSingleHartTest, TestFailed
+from testlib import assertTrue
MSTATUS_UIE = 0x00000001
MSTATUS_SIE = 0x00000002
def test(self):
self.check_reg("f18", "fs2")
+class CustomRegisterTest(SimpleRegisterTest):
+ def early_applicable(self):
+ return self.target.implements_custom_test
+
+ def check_custom(self, magic):
+ regs = {k: v for k, v in self.gdb.info_registers("all").iteritems()
+ if k.startswith("custom")}
+ assertEqual(set(regs.keys()),
+ set(("custom1",
+ "custom12345",
+ "custom12346",
+ "custom12347",
+ "custom12348")))
+ for name, value in regs.iteritems():
+ number = int(name[6:])
+ if number % 2:
+ expect = number + magic
+ assertIn(value, (expect, expect + (1<<32)))
+ else:
+ assertIn("Could not fetch register", value)
+
+ def test(self):
+ self.check_custom(0)
+
+ # Now test writing
+ magic = 6667
+ self.gdb.p("$custom12345=%d" % (12345 + magic))
+ self.gdb.stepi()
+
+ self.check_custom(magic)
+
class SimpleNoExistTest(GdbTest):
def test(self):
try:
class DebugBreakpoint(DebugTest):
def test(self):
-
self.gdb.b("rot13")
-
# The breakpoint should be hit exactly 2 times.
for _ in range(2):
output = self.gdb.c()
value = self.gdb.p("$x%d" % n)
assertEqual(value, hart.index * 0x800 + n - 1)
-class MulticoreRunHaltStepiTest(GdbTest):
+#class MulticoreRunHaltStepiTest(GdbTest):
+# compile_args = ("programs/multicore.c", "-DMULTICORE")
+#
+# def early_applicable(self):
+# return len(self.target.harts) > 1
+#
+# def setup(self):
+# self.gdb.load()
+# for hart in self.target.harts:
+# self.gdb.select_hart(hart)
+# self.gdb.p("$mhartid")
+# self.gdb.p("$pc=_start")
+#
+# def test(self):
+# previous_hart_count = [0 for h in self.target.harts]
+# previous_interrupt_count = [0 for h in self.target.harts]
+# # Check 10 times
+# for i in range(10):
+# # 3 attempts for each time we want the check to pass
+# for attempt in range(3):
+# self.gdb.global_command("echo round %d attempt %d\\n" % (i,
+# attempt))
+# self.gdb.c_all(wait=False)
+# time.sleep(2)
+# self.gdb.interrupt_all()
+# hart_count = self.gdb.p("hart_count")
+# interrupt_count = self.gdb.p("interrupt_count")
+# ok = True
+# for i, h in enumerate(self.target.harts):
+# if hart_count[i] <= previous_hart_count[i]:
+# ok = False
+# break
+# if interrupt_count[i] <= previous_interrupt_count[i]:
+# ok = False
+# break
+# self.gdb.p("$mie")
+# self.gdb.p("$mip")
+# self.gdb.p("$mstatus")
+# self.gdb.p("$priv")
+# self.gdb.p("buf", fmt="")
+# self.gdb.select_hart(h)
+# pc = self.gdb.p("$pc")
+# self.gdb.stepi()
+# stepped_pc = self.gdb.p("$pc")
+# assertNotEqual(pc, stepped_pc)
+# previous_hart_count = hart_count
+# previous_interrupt_count = interrupt_count
+# if ok:
+# break
+# else:
+# assert False, \
+# "hart count or interrupt didn't increment as expected"
+
+class MulticoreRunAllHaltOne(GdbTest):
compile_args = ("programs/multicore.c", "-DMULTICORE")
def early_applicable(self):
return len(self.target.harts) > 1
def setup(self):
+ self.gdb.select_hart(self.target.harts[0])
self.gdb.load()
for hart in self.target.harts:
self.gdb.select_hart(hart)
self.gdb.p("$pc=_start")
def test(self):
- previous_hart_count = [0 for h in self.target.harts]
- previous_interrupt_count = [0 for h in self.target.harts]
- for _ in range(10):
+ if not self.gdb.one_hart_per_gdb():
+ return 'not_applicable'
+
+ # Run harts in reverse order
+ for h in reversed(self.target.harts):
+ self.gdb.select_hart(h)
self.gdb.c(wait=False)
- time.sleep(2)
- self.gdb.interrupt()
- self.gdb.p("$mie")
- self.gdb.p("$mip")
- self.gdb.p("$mstatus")
- self.gdb.p("$priv")
- self.gdb.p("buf", fmt="")
- hart_count = self.gdb.p("hart_count")
- interrupt_count = self.gdb.p("interrupt_count")
- for i, h in enumerate(self.target.harts):
- assertGreater(hart_count[i], previous_hart_count[i])
- assertGreater(interrupt_count[i], previous_interrupt_count[i])
- self.gdb.select_hart(h)
- pc = self.gdb.p("$pc")
- self.gdb.stepi()
- stepped_pc = self.gdb.p("$pc")
- assertNotEqual(pc, stepped_pc)
-class MulticoreRunAllHaltOne(GdbTest):
+ self.gdb.interrupt()
+ # Give OpenOCD time to call poll() on both harts, which is what causes
+ # the bug.
+ time.sleep(1)
+ self.gdb.p("buf", fmt="")
+
+class MulticoreRtosSwitchActiveHartTest(GdbTest):
compile_args = ("programs/multicore.c", "-DMULTICORE")
def early_applicable(self):
self.gdb.p("$pc=_start")
def test(self):
- if not self.gdb.one_hart_per_gdb():
+ if self.gdb.one_hart_per_gdb():
return 'not_applicable'
- # Run harts in reverse order
- for h in reversed(self.target.harts):
- self.gdb.select_hart(h)
- self.gdb.c(wait=False)
+ # Set breakpoint near '_start' label to increase the chances of a
+ # situation when all harts hit breakpoint immediately and
+ # simultaneously.
+ self.gdb.b("set_trap_handler")
- self.gdb.interrupt()
- # Give OpenOCD time to call poll() on both harts, which is what causes
- # the bug.
- time.sleep(1)
- self.gdb.p("buf", fmt="")
+ # Check that all harts hit breakpoint one by one.
+ for _ in range(len(self.target.harts)):
+ output = self.gdb.c()
+ assertIn("hit Breakpoint", output)
+ assertIn("set_trap_handler", output)
+ assertNotIn("received signal SIGTRAP", output)
class StepTest(GdbSingleHartTest):
compile_args = ("programs/step.S", )
pc = self.gdb.p("$pc")
assertEqual("%x" % (pc - main_address), "%x" % expected)
+class JumpHbreak(GdbSingleHartTest):
+ """'jump' resumes execution at location. Execution stops again immediately
+ if there is a breakpoint there.
+ That second line can be trouble."""
+ compile_args = ("programs/trigger.S", )
+
+ def early_applicable(self):
+ return self.hart.instruction_hardware_breakpoint_count >= 1
+
+ def setup(self):
+ self.gdb.load()
+ self.gdb.hbreak("main")
+ self.gdb.c()
+ self.gdb.command("delete 1")
+
+ def test(self):
+ self.gdb.b("read_loop")
+ self.gdb.command("hbreak just_before_read_loop")
+ output = self.gdb.command("jump just_before_read_loop")
+ assertRegexpMatches(output, r"Breakpoint \d, just_before_read_loop ")
+ output = self.gdb.c()
+ assertRegexpMatches(output, r"Breakpoint \d, read_loop ")
+
class TriggerTest(GdbSingleHartTest):
compile_args = ("programs/trigger.S", )
def setup(self):
self.gdb.c()
read_loop = self.gdb.p("&read_loop")
read_again = self.gdb.p("&read_again")
- self.gdb.command("rwatch data")
+ data = self.gdb.p("&data")
+ self.gdb.command("rwatch *0x%x" % data)
self.gdb.c()
# Accept hitting the breakpoint before or after the load instruction.
assertIn(self.gdb.p("$pc"), [read_loop, read_loop + 4])
self.gdb.command("b just_before_write_loop")
self.gdb.c()
write_loop = self.gdb.p("&write_loop")
- self.gdb.command("watch data")
- self.gdb.c()
+ data = self.gdb.p("&data")
+ self.gdb.command("watch *0x%x" % data)
+ output = self.gdb.c()
+ if "_exit (status=0)" in output:
+ # We ran to _exit. It looks as if we didn't hit the trigger at all.
+ # However this can be "correct" behavior. gdb's definition of
+ # "watch" is to run until the value in memory changes. To do this
+ # it reads the memory value when the trigger is set, and then when
+ # the halt happens. Because our triggers can fire just before the
+ # write happens, when gdb does this check the memory hasn't
+ # changed. So it silently resumes running.
+ # https://github.com/riscv/riscv-openocd/issues/295 tracks this
+ # problem. Until it's fixed, we're going to allow running to _exit.
+ return
+
# Accept hitting the breakpoint before or after the store instruction.
assertIn(self.gdb.p("$pc"), [write_loop, write_loop + 4])
assertEqual(self.gdb.p("$a0"), self.gdb.p("&data"))
self.binary = self.target.compile(self.hart, self.download_c.name,
"programs/checksum.c")
- self.gdb.command("file %s" % self.binary)
+ self.gdb.global_command("file %s" % self.binary)
def test(self):
- # Some hart will compete the CRC calculation first!
- # Let them race in RTOS mode.
- # In non-RTOS mode, only one hart will continue.
- # This loop will fail because the others won't know
- # about '_start'. But if that is the case, they
- # won't run on the `continue` either, so we don't really care.
- try:
- self.gdb.load()
- for hart in self.target.harts:
- self.gdb.select_hart(hart)
- self.gdb.p("$pc=_start")
- except ValueError: #invalid literal for int() with base 0: 'No symbol table is loaded. Use the "file" command.'
- pass
- finally:
-
- self.gdb.select_hart(self.hart)
+ self.gdb.load()
+ self.parkOtherHarts()
+ self.gdb.command("b _exit")
self.gdb.c()
assertEqual(self.gdb.p("status"), self.crc)
os.unlink(self.download_c.name)
self.supported.add(2)
self.supported.add(3)
-class PrivRw(PrivTest):
- def test(self):
- """Test reading/writing priv."""
# Disable physical memory protection by allowing U mode access to all
# memory.
try:
# SATP only exists if you have S mode.
pass
+class PrivRw(PrivTest):
+ def test(self):
+ """Test reading/writing priv."""
# Leave the PC at _start, where the first 4 instructions should be
# legal in any mode.
for privilege in range(4):