-<HTML>
+<html><head><title>Mesa fbdev/DRI Environment</title>
-<TITLE>Mesa fbdev/DRI Environment</TITLE>
-<BODY text="#000000" bgcolor="#55bbff" link="#111188">
-<center><H1>Mesa fbdev/DRI Drivers</H1></center>
+<link rel="stylesheet" type="text/css" href="mesa.css"></head>
+<body>
-<H1>1. Introduction</H1>
+<center><h1>Mesa fbdev/DRI Drivers</h1></center>
+<br>
+
+<h1>1. Introduction</h1>
<p>
-The fbdev/DRI sub-project within Mesa brings hardware accelerated OpenGL
-rendering to the Linux fbdev environment.
-The X Window System / XFree86 is not needed.
+The fbdev/DRI environment supports hardware-accelerated 3D rendering without
+the X window system. This is typically used for embedded applications.
</p>
<p>
-Basically, the <a href="http://dri.sf.net/">DRI</a> drivers for hardware
-accelerated OpenGL for XFree86 have been ported to fbdev so that X is
-not needed.
-This means fbdev/DRI works in full-screen mode only.
+Contributors to this project include Jon Smirl, Keith Whitwell and Dave Airlie.
</p>
<p>
-DRI driver writers may find this simplified environment easier to work in,
-compared to the full XFree86/DRI environment.
+Applications in the fbdev/DRI environment use
+the <a href="http://www.nabble.com/file/p15480666/MiniGXL.html"> MiniGLX</a> interface to choose pixel
+formats, create rendering contexts, etc. It's a subset of the GLX and
+Xlib interfaces allowing some degree of application portability between
+the X and X-less environments.
</p>
<p>
-Much of the work for this project has been done by Jon Smirl and
-Keith Whitwell.
+Note that this environment is not well-supported and these instructions
+may not be completely up to date.
</p>
+<br>
+
+
+<h1>2. Compilation</h1>
<p>
-To use fbdev/DRI, you'll need a Linux 2.4 or 2.6 kernel.
+
+<h2>2.1 glxproto</h2>
+
+Get <a href="http://cvsweb.xfree86.org/cvsweb/*checkout*/xc/include/GL/glxproto.h?rev=1.9">glxproto.h</a>. Copy it to the /mesa/include/GL/ directory.
</p>
+<h2>2.2 libpciaccess</h2>
<p>
-The fbdev/DRI Mesa code is in the Mesa CVS trunk (to be released as Mesa
-5.1 in the future).
+Check if you have libpciaccess installed:
</p>
+<pre>pkg-config --modversion pciaccess
+</pre>
+<p>
+If not you can download the latest code from:
+</p>
+<pre> git clone git://anongit.freedesktop.org/git/xorg/lib/libpciaccess
+</pre>
+<p>
+Run autogen.sh to generate a configure file. autogen.sh uses autoconf
+utility. This utility may not be installed with your linux distro,
+check if it is available. if not you can use your package manager or
+type:
+</p>
+<pre>sudo apt-get install autoconf
+</pre>
+The next step is to install the libpciaccess library.
+<pre>make
+make install
+</pre>
+<p> Now your libpciaccess.a file is saved into /usr/local/lib
+directory. If you have a libpciaccess.a in /usr/lib you may simply copy
+and overwrite these files. Don't forget to copy libpciaccess.pc file to
+/usr/lib/pkgconfig, which is also located in /usr/local/lib/pkgconfig/.
+Or you may use the following system variables:
+</p>
+<pre>export LD_LIBRARY_PATH=/usr/local/lib
+export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
+</pre>
-<h1>2. Compilation</h1>
+<h2>2.3 drm</h2>
+
+<p>The next step is to compile the drm. DRM consists of two seperate parts,
+the DRM client library(lindrm.so) and kernel device module(such as
+radeon.ko). We need to make a small change in kernel device module. So
+you need to download the kernel source. You may choose the nearest
+mirror from www.kernel.org, or you are using Fedora Core 5, for
+example, you may need to install RPMs such as:
+kernel-smp-devel-2.16.15-1.2054_FC5.i686.rpm
+kernel-devel-2.6.15-1.2054_FC5.i686.rpm
+etc. You can find a detailed information <a href="http://www.howtoforge.com/kernel_compilation_fedora">here.</a>
+</p>
-<p>
-Assuming you're starting with a fresh Mesa CVS checkout, do the following:
+<p>You will find drm_drv.c at /usr/src/LINUX-VERSION/drivers/char/drm/. Edit this code and comment out the following part:
+</p>
+
+<pre>
+ /* ||
+ ((ioctl->flags & DRM_MASTER) && !priv->master)*/
+</pre>
+Now you are ready to compile your kernel. If your kernel version is
+identical to the version you have compiled, you can simply over write
+your new "ko" files over older ones. If you have compiled a different
+kernel, you must configure your grub or lilo to be able to boot your
+new kernel. <p>
+You'll need fbdev header files. Check with:
</p>
<pre>
- cd Mesa-newtree
- cp Makefile.X11 Makefile # or use a symlink
- make linux-solo
+ ls -l /usr/include/linux/fb.
</pre>
+<p>This file may be missing if you have not installed linux header files.
-<p>
-When this is finished, check the <code>Mesa-newtree/lib</code> directory
-to verify that the following files were made:
+
+<h2>2.4 Mesa</h2>
+
+</p><p>Get latest development Mesa sources from git repository
+(currently 7.1-prerelease)
+</p>
+<pre>
+ git clone git://anongit.freedesktop.org/git/mesa/mesa
+</pre>
+
+<p>You will need the makedepend utility which is a part of mesa project
+to build your linux-solo. You probably wont have this utility. You can
+download its source from following git repulsitory:
</p>
+<pre>
+ git clone git://anongit.freedesktop.org/git/xorg/util/makedepend
+</pre>
+
+<p>Get the latest stable mesa version from SourceForge (currently 7.0.3)
+<a href="http://sourceforge.net/project/showfiles.php?group_id=3">http://sourceforge.net/project/showfiles.php?group_id=3</a>
+</p>
+
+<p>Copy the miniglx folder from 7.1-prerelease to 7.0.3.
+You may also extract GLUT to 7.0.3 version at this step.
+</p>
+
+<p>Edit linux-solo.conf at /conf directory, just only compile the
+graphics driver you need, delete the unwanted drivers names from the
+list(some drivers are causing problems...)
+</p>
+<pre>
+ while(build==0)
+ {
+ make linux-solo
+
+ There will be some missing header files, copy them from 7.1-prerelease
+ }
+</pre>
+<p>
+When complete you should have the following:
+</p>
<ul>
-<li><code>libGL.so.1.2</code> - the client-side OpenGL library
- (and a few symlinks to it).
-<li><code>libGLU.so.1.1</code> - the GLU library (and a few symlinks to it).
-<li><code>libglut.so.3.7</code> - the GLUT library (and a few symlinks to it).
-<li><code>mga_dri.so</code> - DRI driver for Matrox G200/G400 cards.
-<li><code>r128_dri.so</code> - DRI driver for ATI Rage 128 cards.
-<li><code>r200_dri.so</code> - DRI driver for ATI R200 Radeon cards.
-<li><code>radeon_dri.so</code> - DRI driver for original ATI Radeon cards.
-<li><code>i810_dri.so</code> - DRI driver for Intel i810/i815 chips.
-<li><code>i830_dri.so</code> - DRI driver for Intel i830/i845 chips.
-<li><code>mga_dri.so</code> - DRI driver for Matrox G200/G400 cards.
-<li><code>sis_dri.so</code> - DRI driver for SIS cards.
-<li><code>tdfx_dri.so</code> - DRI driver for 3dfx Voodoo 3/4/5 cards.
-<li><code>gamma_dri.so</code> - DRI driver for 3Dlabs gamma cards.
-<li><code>fb_dri.so</code> - software-only fbdev driver.
-<li><code>miniglx.conf</code> - configuration file for the MiniGLX interface
-</ul>
+<li>lib/libGL.so - the GL library which applications link with
+</li><li>lib/*_dri_so - DRI drivers
+</li><li>lib/miniglx.conf - sample MiniGLX config file
+</li><li>progs/miniglx/* - several MiniGLX sample programs
+</li></ul>
+
+To install these files into appropriate locations in system:
+<pre>
+ make install
+</pre>
+
+Now your openGL libraries are copied to /usr/local/lib and
+miniglx.conf is copied to /etc. You may copy them to /usr/lib and
+overwrite your old GL libraries. Or you may export following variable:
+
+<pre>
+ export LIBGL_DRIVERS_PATH=/usr/local/lib
+</pre>
+<br>
<h1>3. Using fbdev/DRI</h1>
<p>
-If XFree86 is currently running, exit/stop the X server so you're
-working from the console.
+If an X server currently running, exit/stop it so you're working from
+the console. Following command shuts down the x window and also the multi user support.
</p>
+<pre>
+ init 1
+</pre>
+<p>Also you may define the runlevel as 1 in "/etc/inittab". Your system
+will always start in single user mode and without x-window with this
+option set.
+</p><h2>3.1 Load Kernel Modules</h2>
-<h2>3.1 Kernel Modules</h2>
-
<p>
-You'll need to load kernel modules specific to your graphics hardware.
-The following kernel modules should be included with your kernel.
+You'll need to load the kernel modules specific to your graphics hardware.
+Typically, this consists of the agpgart module, an fbdev driver module
+and the DRM kernel module.
+</p>
+<p>
+As root, the kernel modules can be loaded as follows:
</p>
+<p>
+If you have Intel i915/i945 hardware:
+</p>
+<pre> modprobe agpgart # the AGP GART module
+ modprobe intelfb # the Intel fbdev driver
+ modprobe i915 # the i915/945 DRI kernel module
+</pre>
<p>
-If you have ATI Radeon/R200 hardware, run as root:
+If you have ATI Radeon/R200 hardware:
</p>
-<pre>
- modprobe agpgart # the AGP GART module
+<pre> modprobe agpgart # the AGP GART module
modprobe radeonfb # the Radeon fbdev driver
modprobe radeon # the Radeon DRI kernel module
</pre>
<p>
-If you have ATI Rage 128 hardware, run as root:
+If you have ATI Rage 128 hardware:
</p>
-<pre>
- modprobe agpgart # the AGP GART module
+<pre> modprobe agpgart # the AGP GART module
modprobe aty128fb # the Rage 128 fbdev driver
modprobe r128 # the Rage 128 DRI kernel module
</pre>
<p>
-If you have Matrox G200/G400 hardware, run as root:
+If you have Matrox G200/G400 hardware:
</p>
-<pre>
- modprobe agpgart # the AGP GART module
+<pre> modprobe agpgart # the AGP GART module
modprobe mgafb # the Matrox fbdev driver
modprobe mga # the Matrox DRI kernel module
</pre>
<p>
-Then run <code>lsmod</code> to be sure the modules are loaded.
-For a Radeon card, you should see something like this:
+To verify that the agpgart, fbdev and drm modules are loaded:
</p>
-<pre>
-Module Size Used by Not tainted
-radeon 110308 0 (unused)
-radeonfb 21900 0 (unused)
-agpgart 43072 1
+<pre> ls -l /dev/agpgart /dev/fb* /dev/dri
</pre>
-
<p>
-If the driver complains that the radeon/mga/etc/ kernel module is too
-old, you'll have to compile/install a newer one from the DRI project.
+Alternately, use lsmod to inspect the currently installed modules.
+If you have problems, look at the output of dmesg.
</p>
<h2>3.2 Configuration File</h2>
<p>
-The <code>Mesa-newtree/lib/miniglx.conf</code> file should be installed
-in <code>/etc/</code>.
+review/edit /etc/miniglx.conf.
+Alternately, the MINIGLX_CONF environment variable can be used to
+indicate the location of miniglx.conf
</p>
+To determine the pciBusID value, run lspci and examine the output.
+For example:
+<p></p>
+<pre> /sbin/lspci:
+ 00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL Express Chipset Family Graphics Controller (rev 04)
+</pre>
<p>
-Edit <code>/etc/miniglx.conf</code> to be sure it's set up correctly
-for your hardware.
-Comments in the file explain the options.
+00:02.0 indicates that pciBusID should be PCI:0:2:0
</p>
+
+
<h2>3.3 Running fbdev/DRI Programs</h2>
<p>
Make sure your LD_LIBRARY_PATH environment variable is set to the
-<code>Mesa-newtree/lib/</code> directory.
+location of the libGL.so library. You may need to append other paths
+to LD_LIBRARY_PATH if libpciaccess.so is in a non-standard location,
+for example.
</p>
<p>
-Change to the <code>Mesa-newtree/progs/miniglx/</code> directory and
+Change to the <code>Mesa/progs/miniglx/</code> directory and
start the sample_server program in the background:
</p>
-<pre>
- ./sample_server &
+<pre> ./sample_server &
</pre>
<p>
Then try running the <code>miniglxtest</code> program:
</p>
-<pre>
- ./miniglxtest
+<pre> ./miniglxtest
</pre>
<p>
You should see a rotating quadrilateral which changes color as it rotates.
If you run other tests in the miniglx/ directory, you may want to run
them from a remote shell so that you can stop them with ctrl-C.
</p>
-
+<br>
<h1>4.0 Troubleshooting</h1>
-<p>
+<ol>
+<li>
If you try to run miniglxtest and get the following:
-</p>
-<pre>
- [miniglx] failed to probe chipset
+<br>
+<pre> [miniglx] failed to probe chipset
connect: Connection refused
server connection lost
</pre>
-<p>
It means that the sample_server process is not running.
-</p>
-
-
+<br>
+<br>
+</li>
+</ol>
<h1>5.0 Programming Information</h1>
<p>
-The full OpenGL API is available with fbdev/DRI.
-</p>
-
-<p>
-OpenGL/Mesa is interfaced to fbdev via the <a href="MiniGLX.html">MiniGLX</a>
+OpenGL/Mesa is interfaced to fbdev via the <a href="http://www.nabble.com/file/p15480666/MiniGLX.html">MiniGLX</a>
interface.
MiniGLX is a subset of Xlib and GLX API functions which provides just
enough functionality to setup OpenGL rendering and respond to simple
</p>
+
</body>
</html>
projects / mesa.git / blobdiff