architecture behaviour of execute1 is
type reg_type is record
e : Execute1ToWritebackType;
+ cur_instr : Decode2ToExecute1Type;
busy: std_ulogic;
terminate: std_ulogic;
fp_exception_next : std_ulogic;
prev_op : insn_type_t;
lr_update : std_ulogic;
next_lr : std_ulogic_vector(63 downto 0);
- resmux : std_ulogic_vector(2 downto 0);
- submux : std_ulogic_vector(2 downto 0);
mul_in_progress : std_ulogic;
mul_finish : std_ulogic;
div_in_progress : std_ulogic;
cntz_in_progress : std_ulogic;
- slow_op_insn : insn_type_t;
- slow_op_dest : gpr_index_t;
- slow_op_rc : std_ulogic;
- slow_op_oe : std_ulogic;
- slow_op_xerc : xer_common_t;
last_nia : std_ulogic_vector(63 downto 0);
redirect : std_ulogic;
abs_br : std_ulogic;
end record;
constant reg_type_init : reg_type :=
(e => Execute1ToWritebackInit,
+ cur_instr => Decode2ToExecute1Init,
busy => '0', lr_update => '0', terminate => '0',
fp_exception_next => '0', trace_next => '0', prev_op => OP_ILLEGAL,
mul_in_progress => '0', mul_finish => '0', div_in_progress => '0', cntz_in_progress => '0',
- slow_op_insn => OP_ILLEGAL, slow_op_rc => '0', slow_op_oe => '0', slow_op_xerc => xerc_init,
next_lr => (others => '0'), last_nia => (others => '0'),
redirect => '0', abs_br => '0', do_intr => '0', vector => 0,
br_offset => (others => '0'), redir_mode => "0000",
signal spr_result: std_ulogic_vector(63 downto 0);
signal result_mux_sel: std_ulogic_vector(2 downto 0);
signal sub_mux_sel: std_ulogic_vector(2 downto 0);
+ signal current: Decode2ToExecute1Type;
-- multiply signals
signal x_to_multiply: MultiplyInputType;
terminate_out <= r.terminate;
+ current <= e_in when r.busy = '0' else r.cur_instr;
+
-- Result mux
- result_mux_sel <= e_in.result_sel when r.busy = '0' else r.resmux;
- sub_mux_sel <= e_in.sub_select when r.busy = '0' else r.submux;
- with result_mux_sel select alu_result <=
+ with current.result_sel select alu_result <=
adder_result when "000",
logical_result when "001",
rotator_result when "010",
variable a_inv : std_ulogic_vector(63 downto 0);
variable b_or_m1 : std_ulogic_vector(63 downto 0);
variable addg6s : std_ulogic_vector(63 downto 0);
+ variable isel_result : std_ulogic_vector(63 downto 0);
+ variable darn : std_ulogic_vector(63 downto 0);
+ variable mfcr_result : std_ulogic_vector(63 downto 0);
+ variable setb_result : std_ulogic_vector(63 downto 0);
variable newcrf : std_ulogic_vector(3 downto 0);
variable sum_with_carry : std_ulogic_vector(64 downto 0);
- variable result_en : std_ulogic;
variable crnum : crnum_t;
variable crbit : integer range 0 to 31;
variable scrnum : crnum_t;
variable fv : Execute1ToFPUType;
begin
sum_with_carry := (others => '0');
- result_en := '0';
newcrf := (others => '0');
is_branch := '0';
taken_branch := '0';
-- (SO, OV[32] and CA[32]) are only modified by instructions that are
-- handled here, we can just forward the result being sent to
-- writeback.
- if r.e.write_xerc_enable = '1' then
+ if r.e.write_xerc_enable = '1' or r.busy = '1' then
v.e.xerc := r.e.xerc;
else
v.e.xerc := e_in.xerc;
v.cntz_in_progress := '0';
v.mul_finish := '0';
- misc_result <= (others => '0');
spr_result <= (others => '0');
spr_val := (others => '0');
sum_with_carry := ppc_adde(a_inv, b_or_m1,
decode_input_carry(e_in.input_carry, v.e.xerc));
adder_result <= sum_with_carry(63 downto 0);
+ carry_32 := sum_with_carry(32) xor a_inv(32) xor b_in(32);
+ carry_64 := sum_with_carry(64);
-- signals to multiply and divide units
sign1 := '0';
x_to_divider.divisor <= x"00000000" & std_ulogic_vector(abs2(31 downto 0));
end if;
- case sub_mux_sel(1 downto 0) is
+ case current.sub_select(1 downto 0) is
when "00" =>
muldiv_result <= multiply_to_x.result(63 downto 0);
when "01" =>
muldiv_result <= divider_to_x.write_reg_data;
end case;
+ -- Compute misc_result
+ case current.sub_select is
+ when "000" =>
+ misc_result <= (others => '0');
+ when "001" =>
+ -- addg6s
+ addg6s := (others => '0');
+ for i in 0 to 14 loop
+ lo := i * 4;
+ hi := (i + 1) * 4;
+ if (a_in(hi) xor b_in(hi) xor sum_with_carry(hi)) = '0' then
+ addg6s(lo + 3 downto lo) := "0110";
+ end if;
+ end loop;
+ if sum_with_carry(64) = '0' then
+ addg6s(63 downto 60) := "0110";
+ end if;
+ misc_result <= addg6s;
+ when "010" =>
+ -- isel
+ crbit := to_integer(unsigned(insn_bc(e_in.insn)));
+ if cr_in(31-crbit) = '1' then
+ isel_result := a_in;
+ else
+ isel_result := b_in;
+ end if;
+ misc_result <= isel_result;
+ when "011" =>
+ -- darn
+ darn := (others => '1');
+ if random_err = '0' then
+ case e_in.insn(17 downto 16) is
+ when "00" =>
+ darn := x"00000000" & random_cond(31 downto 0);
+ when "10" =>
+ darn := random_raw;
+ when others =>
+ darn := random_cond;
+ end case;
+ end if;
+ misc_result <= darn;
+ when "100" =>
+ -- mfmsr
+ misc_result <= ctrl.msr;
+ when "101" =>
+ if e_in.insn(20) = '0' then
+ -- mfcr
+ mfcr_result := x"00000000" & cr_in;
+ else
+ -- mfocrf
+ crnum := fxm_to_num(insn_fxm(e_in.insn));
+ mfcr_result := (others => '0');
+ for i in 0 to 7 loop
+ lo := (7-i)*4;
+ hi := lo + 3;
+ if crnum = i then
+ mfcr_result(hi downto lo) := cr_in(hi downto lo);
+ end if;
+ end loop;
+ end if;
+ misc_result <= mfcr_result;
+ when "110" =>
+ -- setb
+ bfa := insn_bfa(e_in.insn);
+ crbit := to_integer(unsigned(bfa)) * 4;
+ setb_result := (others => '0');
+ if cr_in(31 - crbit) = '1' then
+ setb_result := (others => '1');
+ elsif cr_in(30 - crbit) = '1' then
+ setb_result(0) := '1';
+ end if;
+ misc_result <= setb_result;
+ when others =>
+ misc_result <= (others => '0');
+ end case;
+
+ -- compute comparison results
+ -- Note, we have done RB - RA, not RA - RB
+ if e_in.insn_type = OP_CMP then
+ l := insn_l(e_in.insn);
+ else
+ l := not e_in.is_32bit;
+ end if;
+ zerolo := not (or (a_in(31 downto 0) xor b_in(31 downto 0)));
+ zerohi := not (or (a_in(63 downto 32) xor b_in(63 downto 32)));
+ if zerolo = '1' and (l = '0' or zerohi = '1') then
+ -- values are equal
+ trapval := "00100";
+ else
+ if l = '1' then
+ -- 64-bit comparison
+ msb_a := a_in(63);
+ msb_b := b_in(63);
+ else
+ -- 32-bit comparison
+ msb_a := a_in(31);
+ msb_b := b_in(31);
+ end if;
+ if msb_a /= msb_b then
+ -- Subtraction might overflow, but
+ -- comparison is clear from MSB difference.
+ -- for signed, 0 is greater; for unsigned, 1 is greater
+ trapval := msb_a & msb_b & '0' & msb_b & msb_a;
+ else
+ -- Subtraction cannot overflow since MSBs are equal.
+ -- carry = 1 indicates RA is smaller (signed or unsigned)
+ a_lt := (not l and carry_32) or (l and carry_64);
+ trapval := a_lt & not a_lt & '0' & a_lt & not a_lt;
+ end if;
+ end if;
+
ctrl_tmp <= ctrl;
-- FIXME: run at 512MHz not core freq
ctrl_tmp.tb <= std_ulogic_vector(unsigned(ctrl.tb) + 1);
v.prev_op := e_in.insn_type;
end if;
- if ctrl.irq_state = WRITE_SRR1 then
- v.e.exc_write_reg := fast_spr_num(SPR_SRR1);
- v.e.exc_write_data := ctrl.srr1;
- v.e.exc_write_enable := '1';
- ctrl_tmp.msr(MSR_SF) <= '1';
- ctrl_tmp.msr(MSR_EE) <= '0';
- ctrl_tmp.msr(MSR_PR) <= '0';
- ctrl_tmp.msr(MSR_SE) <= '0';
- ctrl_tmp.msr(MSR_BE) <= '0';
- ctrl_tmp.msr(MSR_FP) <= '0';
- ctrl_tmp.msr(MSR_FE0) <= '0';
- ctrl_tmp.msr(MSR_FE1) <= '0';
- ctrl_tmp.msr(MSR_IR) <= '0';
- ctrl_tmp.msr(MSR_DR) <= '0';
- ctrl_tmp.msr(MSR_RI) <= '0';
- ctrl_tmp.msr(MSR_LE) <= '1';
- v.e.valid := '1';
- v.trace_next := '0';
- v.fp_exception_next := '0';
- report "Writing SRR1: " & to_hstring(ctrl.srr1);
-
- elsif valid_in = '1' and e_in.second = '0' and
- ((HAS_FPU and r.fp_exception_next = '1') or r.trace_next = '1') then
+ -- Determine if there is any exception to be taken
+ -- before/instead of executing this instruction
+ if valid_in = '1' and e_in.second = '0' then
if HAS_FPU and r.fp_exception_next = '1' then
-- This is used for FP-type program interrupts that
-- become pending due to MSR[FE0,FE1] changing from 00 to non-zero.
+ exception := '1';
v.vector := 16#700#;
ctrl_tmp.srr1(63 - 43) <= '1';
ctrl_tmp.srr1(63 - 47) <= '1';
- else
+ elsif r.trace_next = '1' then
-- Generate a trace interrupt rather than executing the next instruction
-- or taking any asynchronous interrupt
+ exception := '1';
v.vector := 16#d00#;
ctrl_tmp.srr1(63 - 33) <= '1';
if r.prev_op = OP_LOAD or r.prev_op = OP_ICBI or r.prev_op = OP_ICBT or
elsif r.prev_op = OP_STORE or r.prev_op = OP_DCBZ or r.prev_op = OP_DCBTST then
ctrl_tmp.srr1(63 - 36) <= '1';
end if;
- end if;
- exception := '1';
-
- elsif irq_valid = '1' and valid_in = '1' and e_in.second = '0' then
- -- we need two cycles to write srr0 and 1
- -- will need more when we have to write HEIR
- -- Don't deliver the interrupt until we have a valid instruction
- -- coming in, so we have a valid NIA to put in SRR0.
- exception := '1';
- elsif valid_in = '1' and ctrl.msr(MSR_PR) = '1' and
- instr_is_privileged(e_in.insn_type, e_in.insn) then
- -- generate a program interrupt
- exception := '1';
- v.vector := 16#700#;
- -- set bit 45 to indicate privileged instruction type interrupt
- ctrl_tmp.srr1(63 - 45) <= '1';
- report "privileged instruction";
+ elsif irq_valid = '1' then
+ -- Don't deliver the interrupt until we have a valid instruction
+ -- coming in, so we have a valid NIA to put in SRR0.
+ exception := '1';
- elsif not HAS_FPU and valid_in = '1' and e_in.fac = FPU then
- -- make lfd/stfd/lfs/stfs etc. illegal in no-FPU implementations
- illegal := '1';
+ elsif ctrl.msr(MSR_PR) = '1' and instr_is_privileged(e_in.insn_type, e_in.insn) then
+ -- generate a program interrupt
+ exception := '1';
+ v.vector := 16#700#;
+ -- set bit 45 to indicate privileged instruction type interrupt
+ ctrl_tmp.srr1(63 - 45) <= '1';
+ report "privileged instruction";
- elsif HAS_FPU and valid_in = '1' and ctrl.msr(MSR_FP) = '0' and e_in.fac = FPU then
- -- generate a floating-point unavailable interrupt
- exception := '1';
- v.vector := 16#800#;
- report "FP unavailable interrupt";
+ elsif not HAS_FPU and e_in.fac = FPU then
+ -- make lfd/stfd/lfs/stfs etc. illegal in no-FPU implementations
+ illegal := '1';
- elsif valid_in = '1' and e_in.unit = ALU then
+ elsif HAS_FPU and ctrl.msr(MSR_FP) = '0' and e_in.fac = FPU then
+ -- generate a floating-point unavailable interrupt
+ exception := '1';
+ v.vector := 16#800#;
+ report "FP unavailable interrupt";
+ end if;
+ end if;
+ if valid_in = '1' and exception = '0' and illegal = '0' and e_in.unit = ALU then
report "execute nia " & to_hstring(e_in.nia);
+ v.cur_instr := e_in;
+ v.next_lr := next_nia;
v.e.valid := '1';
- v.e.write_reg := e_in.write_reg;
- v.slow_op_insn := e_in.insn_type;
- v.slow_op_dest := gspr_to_gpr(e_in.write_reg);
- v.slow_op_rc := e_in.rc;
- v.slow_op_oe := e_in.oe;
- v.slow_op_xerc := v.e.xerc;
- v.resmux := e_in.result_sel;
- v.submux := e_in.sub_select;
case_0: case e_in.insn_type is
end if;
when OP_NOP | OP_DCBF | OP_DCBST | OP_DCBT | OP_DCBTST | OP_ICBT =>
-- Do nothing
- when OP_ADD | OP_CMP | OP_TRAP =>
- carry_32 := sum_with_carry(32) xor a_inv(32) xor b_in(32);
- carry_64 := sum_with_carry(64);
- if e_in.insn_type = OP_ADD then
- if e_in.output_carry = '1' then
- if e_in.input_carry /= OV then
- set_carry(v.e, carry_32, carry_64);
- else
- v.e.xerc.ov := carry_64;
- v.e.xerc.ov32 := carry_32;
- v.e.write_xerc_enable := '1';
- end if;
- end if;
- if e_in.oe = '1' then
- set_ov(v.e,
- calc_ov(a_inv(63), b_in(63), carry_64, sum_with_carry(63)),
- calc_ov(a_inv(31), b_in(31), carry_32, sum_with_carry(31)));
- end if;
- result_en := '1';
- else
- -- trap, CMP and CMPL instructions
- -- Note, we have done RB - RA, not RA - RB
- if e_in.insn_type = OP_CMP then
- l := insn_l(e_in.insn);
- else
- l := not e_in.is_32bit;
- end if;
- zerolo := not (or (a_in(31 downto 0) xor b_in(31 downto 0)));
- zerohi := not (or (a_in(63 downto 32) xor b_in(63 downto 32)));
- if zerolo = '1' and (l = '0' or zerohi = '1') then
- -- values are equal
- trapval := "00100";
+ when OP_ADD =>
+ if e_in.output_carry = '1' then
+ if e_in.input_carry /= OV then
+ set_carry(v.e, carry_32, carry_64);
else
- if l = '1' then
- -- 64-bit comparison
- msb_a := a_in(63);
- msb_b := b_in(63);
- else
- -- 32-bit comparison
- msb_a := a_in(31);
- msb_b := b_in(31);
- end if;
- if msb_a /= msb_b then
- -- Subtraction might overflow, but
- -- comparison is clear from MSB difference.
- -- for signed, 0 is greater; for unsigned, 1 is greater
- trapval := msb_a & msb_b & '0' & msb_b & msb_a;
- else
- -- Subtraction cannot overflow since MSBs are equal.
- -- carry = 1 indicates RA is smaller (signed or unsigned)
- a_lt := (not l and carry_32) or (l and carry_64);
- trapval := a_lt & not a_lt & '0' & a_lt & not a_lt;
- end if;
- end if;
- if e_in.insn_type = OP_CMP then
- if e_in.is_signed = '1' then
- newcrf := trapval(4 downto 2) & v.e.xerc.so;
- else
- newcrf := trapval(1 downto 0) & trapval(2) & v.e.xerc.so;
- end if;
- bf := insn_bf(e_in.insn);
- crnum := to_integer(unsigned(bf));
- v.e.write_cr_enable := '1';
- v.e.write_cr_mask := num_to_fxm(crnum);
- for i in 0 to 7 loop
- lo := i*4;
- hi := lo + 3;
- v.e.write_cr_data(hi downto lo) := newcrf;
- end loop;
- else
- -- trap instructions (tw, twi, td, tdi)
- v.vector := 16#700#;
- -- set bit 46 to say trap occurred
- ctrl_tmp.srr1(63 - 46) <= '1';
- if or (trapval and insn_to(e_in.insn)) = '1' then
- -- generate trap-type program interrupt
- exception := '1';
- report "trap";
- end if;
+ v.e.xerc.ov := carry_64;
+ v.e.xerc.ov32 := carry_32;
+ v.e.write_xerc_enable := '1';
end if;
end if;
- when OP_ADDG6S =>
- addg6s := (others => '0');
- for i in 0 to 14 loop
- lo := i * 4;
- hi := (i + 1) * 4;
- if (a_in(hi) xor b_in(hi) xor sum_with_carry(hi)) = '0' then
- addg6s(lo + 3 downto lo) := "0110";
- end if;
+ if e_in.oe = '1' then
+ set_ov(v.e,
+ calc_ov(a_inv(63), b_in(63), carry_64, sum_with_carry(63)),
+ calc_ov(a_inv(31), b_in(31), carry_32, sum_with_carry(31)));
+ end if;
+ when OP_CMP =>
+ -- CMP and CMPL instructions
+ if e_in.is_signed = '1' then
+ newcrf := trapval(4 downto 2) & v.e.xerc.so;
+ else
+ newcrf := trapval(1 downto 0) & trapval(2) & v.e.xerc.so;
+ end if;
+ bf := insn_bf(e_in.insn);
+ crnum := to_integer(unsigned(bf));
+ v.e.write_cr_enable := '1';
+ v.e.write_cr_mask := num_to_fxm(crnum);
+ for i in 0 to 7 loop
+ lo := i*4;
+ hi := lo + 3;
+ v.e.write_cr_data(hi downto lo) := newcrf;
end loop;
- if sum_with_carry(64) = '0' then
- addg6s(63 downto 60) := "0110";
+ when OP_TRAP =>
+ -- trap instructions (tw, twi, td, tdi)
+ v.vector := 16#700#;
+ -- set bit 46 to say trap occurred
+ ctrl_tmp.srr1(63 - 46) <= '1';
+ if or (trapval and insn_to(e_in.insn)) = '1' then
+ -- generate trap-type program interrupt
+ exception := '1';
+ report "trap";
end if;
- misc_result <= addg6s;
- result_en := '1';
+ when OP_ADDG6S =>
when OP_CMPRB =>
newcrf := ppc_cmprb(a_in, b_in, insn_l(e_in.insn));
bf := insn_bf(e_in.insn);
newcrf & newcrf & newcrf & newcrf;
when OP_AND | OP_OR | OP_XOR | OP_POPCNT | OP_PRTY | OP_CMPB | OP_EXTS |
OP_BPERM | OP_BCD =>
- result_en := '1';
when OP_B =>
is_branch := '1';
taken_branch := '1';
end if;
when OP_BC =>
-- read_data1 is CTR
- v.e.write_reg := fast_spr_num(SPR_CTR);
bo := insn_bo(e_in.insn);
bi := insn_bi(e_in.insn);
- if bo(4-2) = '0' then
- result_en := '1';
- end if;
is_branch := '1';
taken_branch := ppc_bc_taken(bo, bi, cr_in, a_in);
abs_branch := insn_aa(e_in.insn);
when OP_BCREG =>
-- read_data1 is CTR
-- read_data2 is target register (CTR, LR or TAR)
- v.e.write_reg := fast_spr_num(SPR_CTR);
bo := insn_bo(e_in.insn);
bi := insn_bi(e_in.insn);
- if bo(4-2) = '0' and e_in.insn(10) = '0' then
- result_en := '1';
- end if;
is_branch := '1';
taken_branch := ppc_bc_taken(bo, bi, cr_in, a_in);
abs_branch := '1';
v.cntz_in_progress := '1';
v.busy := '1';
when OP_ISEL =>
- crbit := to_integer(unsigned(insn_bc(e_in.insn)));
- if cr_in(31-crbit) = '1' then
- misc_result <= a_in;
- else
- misc_result <= b_in;
- end if;
- result_en := '1';
when OP_CROP =>
cr_op := insn_cr(e_in.insn);
report "CR OP " & to_hstring(cr_op);
v.e.write_cr_data := newcrf & newcrf & newcrf & newcrf &
newcrf & newcrf & newcrf & newcrf;
when OP_DARN =>
- if random_err = '0' then
- case e_in.insn(17 downto 16) is
- when "00" =>
- misc_result <= x"00000000" & random_cond(31 downto 0);
- when "10" =>
- misc_result <= random_raw;
- when others =>
- misc_result <= random_cond;
- end case;
- else
- misc_result <= (others => '1');
- end if;
- result_en := '1';
when OP_MFMSR =>
- misc_result <= ctrl.msr;
- result_en := '1';
when OP_MFSPR =>
report "MFSPR to SPR " & integer'image(decode_spr_num(e_in.insn)) &
"=" & to_hstring(a_in);
- result_en := '1';
- if is_fast_spr(e_in.read_reg1) then
+ if is_fast_spr(e_in.read_reg1) = '1' then
spr_val := a_in;
if decode_spr_num(e_in.insn) = SPR_XER then
-- bits 0:31 and 35:43 are treated as reserved and return 0s when read using mfxer
when others =>
-- mfspr from unimplemented SPRs should be a nop in
-- supervisor mode and a program interrupt for user mode
- if ctrl.msr(MSR_PR) = '1' then
+ if is_fast_spr(e_in.read_reg1) = '0' and ctrl.msr(MSR_PR) = '1' then
illegal := '1';
end if;
end case;
spr_result <= spr_val;
when OP_MFCR =>
- if e_in.insn(20) = '0' then
- -- mfcr
- misc_result <= x"00000000" & cr_in;
- else
- -- mfocrf
- crnum := fxm_to_num(insn_fxm(e_in.insn));
- misc_result <= (others => '0');
- for i in 0 to 7 loop
- lo := (7-i)*4;
- hi := lo + 3;
- if crnum = i then
- misc_result(hi downto lo) <= cr_in(hi downto lo);
- end if;
- end loop;
- end if;
- result_en := '1';
when OP_MTCRF =>
v.e.write_cr_enable := '1';
if e_in.insn(20) = '0' then
report "MTSPR to SPR " & integer'image(decode_spr_num(e_in.insn)) &
"=" & to_hstring(c_in);
if is_fast_spr(e_in.write_reg) then
- result_en := '1';
if decode_spr_num(e_in.insn) = SPR_XER then
v.e.xerc.so := c_in(63-32);
v.e.xerc.ov := c_in(63-33);
if e_in.output_carry = '1' then
set_carry(v.e, rotator_carry, rotator_carry);
end if;
- result_en := '1';
when OP_SETB =>
- bfa := insn_bfa(e_in.insn);
- crbit := to_integer(unsigned(bfa)) * 4;
- misc_result <= (others => '0');
- if cr_in(31 - crbit) = '1' then
- misc_result <= (others => '1');
- elsif cr_in(30 - crbit) = '1' then
- misc_result(0) <= '1';
- end if;
when OP_ISYNC =>
v.redirect := '1';
report "illegal";
end case;
- v.e.rc := e_in.rc and valid_in;
-
-- Mispredicted branches cause a redirect
if is_branch = '1' then
if taken_branch = '1' then
end if;
end if;
- -- Update LR on the next cycle after a branch link
- -- If we're not writing back anything else, we can write back LR
- -- this cycle, otherwise we take an extra cycle. We use the
- -- exc_write path since next_nia is written through that path
- -- in other places.
- if e_in.lr = '1' then
- if result_en = '0' then
- v.e.exc_write_enable := '1';
- v.e.exc_write_data := next_nia;
- v.e.exc_write_reg := fast_spr_num(SPR_LR);
- else
- v.lr_update := '1';
- v.next_lr := next_nia;
- v.e.valid := '0';
- report "Delayed LR update to " & to_hstring(next_nia);
- v.busy := '1';
- end if;
- end if;
-
- elsif valid_in = '1' then
+ elsif valid_in = '1' and exception = '0' and illegal = '0' then
-- instruction for other units, i.e. LDST
if e_in.unit = LDST then
lv.valid := '1';
-- valid_in = 0. Hence they don't happen in the same cycle as any of
-- the cases above which depend on valid_in = 1.
- if r.redirect = '1' then
- v.e.valid := '1';
- end if;
- if r.lr_update = '1' then
+ if ctrl.irq_state = WRITE_SRR1 then
+ v.e.exc_write_reg := fast_spr_num(SPR_SRR1);
+ v.e.exc_write_data := ctrl.srr1;
v.e.exc_write_enable := '1';
- v.e.exc_write_data := r.next_lr;
- v.e.exc_write_reg := fast_spr_num(SPR_LR);
- v.e.valid := '1';
- -- Keep r.e.write_data unchanged next cycle in case it is needed
- -- for a forwarded result (e.g. for CTR).
- hold_wr_data := '1';
+ ctrl_tmp.msr(MSR_SF) <= '1';
+ ctrl_tmp.msr(MSR_EE) <= '0';
+ ctrl_tmp.msr(MSR_PR) <= '0';
+ ctrl_tmp.msr(MSR_SE) <= '0';
+ ctrl_tmp.msr(MSR_BE) <= '0';
+ ctrl_tmp.msr(MSR_FP) <= '0';
+ ctrl_tmp.msr(MSR_FE0) <= '0';
+ ctrl_tmp.msr(MSR_FE1) <= '0';
+ ctrl_tmp.msr(MSR_IR) <= '0';
+ ctrl_tmp.msr(MSR_DR) <= '0';
+ ctrl_tmp.msr(MSR_RI) <= '0';
+ ctrl_tmp.msr(MSR_LE) <= '1';
+ v.trace_next := '0';
+ v.fp_exception_next := '0';
+ report "Writing SRR1: " & to_hstring(ctrl.srr1);
+
elsif r.cntz_in_progress = '1' then
-- cnt[lt]z always takes two cycles
- result_en := '1';
- v.e.write_reg := gpr_to_gspr(r.slow_op_dest);
- v.e.rc := r.slow_op_rc;
- v.e.xerc := r.slow_op_xerc;
v.e.valid := '1';
elsif r.mul_in_progress = '1' or r.div_in_progress = '1' then
if (r.mul_in_progress = '1' and multiply_to_x.valid = '1') or
else
overflow := divider_to_x.overflow;
end if;
- if r.mul_in_progress = '1' and r.slow_op_oe = '1' then
+ if r.mul_in_progress = '1' and current.oe = '1' then
-- have to wait until next cycle for overflow indication
v.mul_finish := '1';
v.busy := '1';
else
- result_en := '1';
- v.e.write_reg := gpr_to_gspr(r.slow_op_dest);
- v.e.rc := r.slow_op_rc;
- v.e.xerc := r.slow_op_xerc;
- v.e.write_xerc_enable := r.slow_op_oe;
+ v.e.write_xerc_enable := current.oe;
-- We must test oe because the RC update code in writeback
-- will use the xerc value to set CR0:SO so we must not clobber
-- xerc if OE wasn't set.
- if r.slow_op_oe = '1' then
+ if current.oe = '1' then
v.e.xerc.ov := overflow;
v.e.xerc.ov32 := overflow;
- v.e.xerc.so := r.slow_op_xerc.so or overflow;
+ if overflow = '1' then
+ v.e.xerc.so := '1';
+ end if;
end if;
v.e.valid := '1';
end if;
end if;
elsif r.mul_finish = '1' then
hold_wr_data := '1';
- result_en := '1';
- v.e.write_reg := gpr_to_gspr(r.slow_op_dest);
- v.e.rc := r.slow_op_rc;
- v.e.xerc := r.slow_op_xerc;
- v.e.write_xerc_enable := r.slow_op_oe;
+ v.e.write_xerc_enable := current.oe;
v.e.xerc.ov := multiply_to_x.overflow;
v.e.xerc.ov32 := multiply_to_x.overflow;
- v.e.xerc.so := r.slow_op_xerc.so or multiply_to_x.overflow;
+ if multiply_to_x.overflow = '1' then
+ v.e.xerc.so := '1';
+ end if;
v.e.valid := '1';
end if;
+ -- When doing delayed LR update, keep r.e.write_data unchanged
+ -- next cycle in case it is needed for a forwarded result (e.g. CTR).
+ if r.lr_update = '1' then
+ hold_wr_data := '1';
+ end if;
-- Generate FP-type program interrupt. fp_in.interrupt will only
-- be set during the execution of a FP instruction.
end if;
end if;
- if do_trace = '1' then
- v.trace_next := '1';
- end if;
-
- if hold_wr_data = '0' then
- v.e.write_data := alu_result;
- else
- v.e.write_data := r.e.write_data;
- end if;
- v.e.write_enable := result_en and not exception;
-
-- generate DSI or DSegI for load/store exceptions
-- or ISI or ISegI for instruction fetch exceptions
if l_in.exception = '1' then
v.do_intr := '1';
end if;
+ if do_trace = '1' then
+ v.trace_next := '1';
+ end if;
+
+ if hold_wr_data = '0' then
+ v.e.write_data := alu_result;
+ else
+ v.e.write_data := r.e.write_data;
+ end if;
+ v.e.write_reg := current.write_reg;
+ v.e.write_enable := current.write_reg_enable and v.e.valid and not exception;
+ v.e.rc := current.rc and v.e.valid and not exception;
+
+ -- Update LR on the next cycle after a branch link
+ -- If we're not writing back anything else, we can write back LR
+ -- this cycle, otherwise we take an extra cycle. We use the
+ -- exc_write path since next_nia is written through that path
+ -- in other places.
+ if v.e.valid = '1' and exception = '0' and current.lr = '1' then
+ if current.write_reg_enable = '0' then
+ v.e.exc_write_enable := '1';
+ v.e.exc_write_data := next_nia;
+ v.e.exc_write_reg := fast_spr_num(SPR_LR);
+ else
+ v.lr_update := '1';
+ v.e.valid := '0';
+ report "Delayed LR update to " & to_hstring(next_nia);
+ v.busy := '1';
+ end if;
+ end if;
+ if r.lr_update = '1' then
+ v.e.exc_write_enable := '1';
+ v.e.exc_write_data := r.next_lr;
+ v.e.exc_write_reg := fast_spr_num(SPR_LR);
+ v.e.valid := '1';
+ end if;
+
+ -- Defer completion for one cycle when redirecting.
+ -- This also ensures r.busy = 1 when ctrl.irq_state = WRITE_SRR1
if v.redirect = '1' then
v.busy := '1';
v.e.valid := '0';
end if;
+ if r.redirect = '1' then
+ v.e.valid := '1';
+ end if;
-- Outputs to fetch1
f.redirect := r.redirect;
projects / microwatt.git / blobdiff