+2011-03-29 Mike Frysinger <vapier@gentoo.org>
+
+ * config/bfin-parse.y (BYTEOP16P): Return yyerror when dest
+ reg $2 is the same as dest reg $4.
+
+2011-03-28 Mike Frysinger <vapier@gentoo.org>
+
+ * config/bfin-parse.y (16bit acc add): Return yyerror when dest
+ reg $1 is the same as dest reg $7.
+
+2011-03-28 H.J. Lu <hongjiu.lu@intel.com>
+
+ * config/tc-i386.c (handle_quad): New.
+ (md_pseudo_table): Add "quad".
+
+2011-03-26 John Marino <binutils@marino.st>
+
+ * configure.tgt: Fix support for *-*-dragonfly*.
+ * config/tc-i386.c: define SVR4_COMMENT_CHARS for dragonfly.
+ * config/te-dragonfly.h: New file.
+
+2011-03-24 Eric B. Weddington <eric.weddington@atmel.com>
+
+ * config/tc-avr.c (mcu_types): Add new devices: atmega325pa,
+ atmega3250pa, atmega3290pa, atmega16hvbrevb, atmega32hvbrevb,
+ at90pwm161.
+ * doc/c-avr.texi: Document new device names.
+
+2011-03-24 Mike Frysinger <vapier@gentoo.org>
+
+ * config/bfin-parse.y (dual 32bit add/sub): Return yyerror when dest
+ reg $1 is the same as dest reg $7.
+ (quad 16bit add/sub): Return yyerror when dest reg $1 is the same as
+ dest reg $7.
+
+2011-03-24 Mike Frysinger <vapier@gentoo.org>
+
+ * config/bfin-parse.y (check_macfuncs): Clarify error message when
+ P is mismatched. Check destination regno are off by one when P is
+ set, or are equal when P is not set.
+
+2011-03-23 Mike Frysinger <vapier@gentoo.org>
+
+ * config/bfin-parse.y (SEARCH): Return yyerror when dest reg $2 is
+ the same as dest reg $4.
+ (BITMUX): Return yyerror when dest reg $3 is the same as dest reg $5.
+
+2011-03-23 Eric B. Weddington <eric.weddington@atmel.com>
+
+ * config/tc-avr.c (mcu_types): Add new xmega devices: atxmega64a1u,
+ atxmega128a1u, atxmega16x1, atxmega32x1, atxmega128b1, atxmega256a3bu.
+ * doc/c-avr.texi: Document new device names.
+
+2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
+
+ * config/tc-avr.c (struct avr_opcodes_s): Add opcode field.
+ (AVR_INSN): Change definition to match.
+ (avr_opcodes): Likewise, change to match.
+ (mcu_types): Add XMEGA architecture names and new XMEGA device names.
+ (md_show_usage): Add XMEGA architecture names.
+ (avr_operand): Add 'E' constraint for DES instruction of XMEGA devices.
+ Add support for SPM Z+ instruction.
+ * doc/c-avr.texi: Add documentation for XMEGA architectures and
+ devices.
+
+2011-03-21 Eric B. Weddington <eric.weddington@atmel.com>
+
+ * config/tc-avr.c (md_show_usage): Add "Assembler" text to output.
+
+2011-03-18 Alan Modra <amodra@gmail.com>
+
+ * config/obj-elf.c (elf_frob_symbol): Report S_SET_SIZE symbol
+ on .size expression errors rather than symbols in the size expression.
+
+2011-03-18 Alan Modra <amodra@gmail.com>
+
+ * input-scrub.c (line_numberT): Delete.
+ (input_scrub_close): Reset line counters.
+ * messages.c (as_show_where): Don't print invalid line number.
+ (as_warn_internal, as_bad_internal): Likewise.
+
+2011-03-18 Alan Modra <amodra@gmail.com>
+
+ * read.c (read_a_source_file): Remove md_after_pass_hook.
+ Move "quit" label before set of dot_symbol.
+ * config/tc-d10v.h (md_after_pass_hook): Don't define.
+ * config/tc-d30v.h (md_after_pass_hook): Likewise.
+ * config/tc-m32r.h (md_after_pass_hook): Likewise.
+ (md_cleanup): Define to call m32r_fill_insn.
+
+2011-03-18 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
+
+ * config/tc-s390.c (md_parse_option): Add -march=all option which
+ switches to the highest available CPU.
+
+2011-03-17 Alan Modra <amodra@gmail.com>
+
+ PR 12569
+ * expr.c (operand): Correct passing of "mode" to expr.
+ * read.c (do_org): Allow expr_section.
+ (get_known_segmented_expression): Don't assert anything about the
+ segment.
+
+2011-03-16 H.J. Lu <hongjiu.lu@intel.com>
+
+ * as.c (show_usage): Add --size-check=.
+ (parse_args): Add and handle OPTION_SIZE_CHECK.
+
+ * as.h (flag_size_check): New.
+
+ * config/obj-elf.c (elf_frob_symbol): Use as_bad to report
+ bad .size directive only for --size-check=error.
+
+ * doc/as.texinfo: Document --size-check=.
+
+2011-03-14 Mike Frysinger <vapier@gentoo.org>
+
+ * config/tc-bfin.c (bfin_cpus[]): Add 0.4 for
+ bf542/bf544/bf547/bf548/bf549.
+
+2011-03-14 Richard Sandiford <richard.sandiford@linaro.org>
+
+ * config/tc-arm.c (md_pcrel_from_section): Use S_FORCE_RELOC to
+ determine whether a relocation is needed.
+ (md_apply_fix, arm_apply_sym_value): Likewise.
+
+2011-03-14 Richard Sandiford <richard.sandiford@linaro.org>
+
+ * config/tc-arm.c (arm_adjust_symtab): Set the branch type
+ for Thumb symbols.
+
+2011-03-11 Nick Clifton <nickc@redhat.com>
+
+ * remap.c (remap_debug_filename): Always allocate a buffer for the
+ returned pointer.
+ * stabs.c (stabs_generate_asm_file): Free the pointer returned by
+ remap_debug_filename.
+
+2011-03-10 Michael Snyder <msnyder@vmware.com>
+
+ Revert the following change:
+ * dwarf2dbg.c (out_file_list): Free malloced 'dir'.
+ (out_debug_info): Free malloced 'dirname' and 'comp_dir'.
+
+2011-03-10 Alan Modra <amodra@gmail.com>
+
+ * gas/config/obj-elf.h (ELF_TARGET_SYMBOL_FIELDS,
+ TARGET_SYMBOL_FIELDS): Don't define.
+ * gas/config/tc-arc.c (arc_common): Use correct symbol "local" field.
+
+2011-03-09 Michael Snyder <msnyder@vmware.com>
+
+ * dwarf2dbg.c (out_file_list): Free malloced 'dir'.
+ (out_debug_info): Free malloced 'dirname' and 'comp_dir'.
+ (emit_fixed_inc_line_addr): Assign instead of conditional in
+ assert.
+
+2011-03-05 H.J. Lu <hongjiu.lu@intel.com>
+
+ * config/obj-elf.c (elf_frob_symbol): Mention symbol name in
+ non-constant .size expression.
+
+2011-03-02 Nick Clifton <nickc@redhat.com>
+
+ * ecoff.c: Incldue filenames.h
+
+2011-02-28 Kai Tietz <kai.tietz@onevision.com>
+
+ * depend.c (register_dependency): Use filename_(n)cmp.
+ * dwarf2dbg.c (get_filenum): Likewise.
+ * ecoff.c (add_file): Likewise.
+ (ecoff_generate_asm_lineno): Likewise.
+ * input-scrub.c (new_logical_line_flags): Likewise.
+ * listing.c (file_info): Likewise.
+ (listing_newline): Likewise.
+ * remap.c (remap_debug_filename): Likewise.
+ * stabs.c (generate_asm_file): Likewise.
+ (stabs_generate_asm_lineno): Likewise.
+
+2011-02-28 Maciej W. Rozycki <macro@codesourcery.com>
+
+ * config/tc-mips.c (append_insn): Disable branch relaxation for
+ DSP instructions.
+
+2011-02-28 Maciej W. Rozycki <macro@codesourcery.com>
+
+ * config/tc-mips.c (macro): Handle M_PREF_AB.
+
+2011-02-28 Maciej W. Rozycki <macro@codesourcery.com>
+
+ * config/tc-mips.c (RELAX_BRANCH_ENCODE): Encode the temporary
+ register to use.
+ (RELAX_BRANCH_UNCOND): Adjust accordingly.
+ (RELAX_BRANCH_LIKELY): Likewise.
+ (RELAX_BRANCH_LINK): Likewise.
+ (RELAX_BRANCH_TOOFAR): Likewise.
+ (RELAX_BRANCH_AT): New macro.
+ (append_insn): Encode the temporary register to use in standard
+ MIPS branch relaxation.
+ (relaxed_branch_length): Update according to changes to
+ RELAX_BRANCH_ENCODE.
+ (md_convert_frag): Use the encoded register as the temporary.
+
+2011-02-28 Maciej W. Rozycki <macro@codesourcery.com>
+
+ * config/tc-mips.c (mips_fix_adjustable): On REL targets also
+ reject PC-relative relocations.
+
+2011-02-28 Maciej W. Rozycki <macro@codesourcery.com>
+
+ * config/tc-mips.c (md_convert_frag): Correct message
+ capitalization.
+
+2011-02-28 Alan Modra <amodra@gmail.com>
+
+ * symbols.c (report_op_error): Remove unnecessary forward declaration.
+ Add "op" parameter. Report operator and operand segments in error
+ message, not operand symbols.
+ (resolve_symbol_value): Always set segment for equated symbols, not
+ just when finalizing. Adjust report_op_error calls.
+
+2011-02-25 H.J. Lu <hongjiu.lu@intel.com>
+
+ * config/tc-i386.c (reloc): Don't sign-check 4-byte relocations
+ if 64bit relocations aren't allowed.
+
+2011-02-25 Alan Modra <amodra@gmail.com>
+
+ PR gas/12519
+ * config/obj-elf.c (elf_frob_symbol): Properly handle size expression.
+
+2011-02-21 Maciej W. Rozycki <macro@codesourcery.com>
+
+ * config/tc-mips.c (mips_ip) <'o'>: Remove duplicate
+ initialization of offset_reloc.
+
+2011-02-15 Richard Henderson <rth@redhat.com>
+
+ * dw2gencfi.c (dot_cfi_dummy): New.
+ (cfi_pseudo_table) [!TARGET_USE_CFIPOP]: New.
+ * read.c (pobegin): Unconditionally call cfi_pop_insert.
+
+2011-02-13 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ * configure: Regenerate.
+
+2011-02-13 Mike Frysinger <vapier@gentoo.org>
+
+ * config/bfin-lex.l (BYTEOP2M): Remove tokenization.
+ * config/bfin-parse.y (BYTEOP2M): Delete token.
+ (asm_1): Remove BYTEOP2M insn matching.
+
+2011-02-12 Mike Frysinger <vapier@gentoo.org>
+
+ * config/bfin-defs.h: Include opcode/bfin.h.
+ (M_S2RND, M_T, M_W32, M_FU, M_TFU, M_IS, M_ISS2, M_IH, M_IU): Delete.
+
+2011-02-11 Mike Frysinger <vapier@gentoo.org>
+
+ * doc/c-bfin.texi (Instruction Delimiting): Fix occur typo.
+ (Modify Registers): Fix subtracted typo.
+ (.byte2): Extend and swap descriptions with .byte4.
+ (.byte4): Extend and swap descriptions with .byte2.
+ (.db, .dw, .dd): Document behavior.
+
+2011-02-11 Mike Frysinger <vapier@gentoo.org>
+
+ * config/bfin-parse.y (TESTSET): Reject REG_SP and REG_FP.
+
+2011-02-11 Alan Modra <amodra@gmail.com>
+
+ * doc/c-ppc.texi (PowerPC-Opts <-nops>): Clarify.
+
+2011-02-10 Alan Modra <amodra@gmail.com>
+
+ * doc/as.texinfo (Overview): Add missing markup around Blackfin
+ and PowerPC options.
+
+2011-02-10 Alan Modra <amodra@gmail.com>
+
+ * config/tc-ppc.c (md_show_usage): Remove -l and -b. Add -K PIC.
+ * doc/as.texinfo: Refer to and include c-ppc.texi for PowerPC options.
+ (Overview <Target PowerPC options>): Add a number of missing options.
+ * doc/c-ppc.texi: Likewise. Add markup for use in manpage generation.
+
+2011-02-08 H.J. Lu <hongjiu.lu@intel.com>
+
+ PR gas/6957
+ * config/tc-i386.c (i386_align_code): Use f32_patt when tuning
+ for i686.
+
+2011-02-08 H.J. Lu <hongjiu.lu@intel.com>
+
+ * config/tc-i386.c (set_cpu_arch): Also update cpu_arch_isa_flags
+ for ISA extensions.
+ (md_parse_option): Likewise.
+
+2011-02-04 Bernd Schmidt <bernds@codesourcery.com>
+
+ * doc/as.texinfo (Target TIC6X options): Don't mention "-matomic".
+ * doc/c-tic6x.texi (TIC6X Directives): Don't mention ".atomic".
+ (TIC6X Options): Don't mention "-matomic".
+ * config/tc-tic6x.c (OPTION_MATOMIC, OPTION_MNO_ATOMIC): Delete.
+ (md_longopts): Remove corresponding entries.
+ (md_parse_option): Don't handle them.
+ (md_show_usage): Don't document them.
+ (tic6x_atomic): Delete variable.
+ (tic6x_update_features): Always copy tic6x_arch_enable to
+ tic6x_features.
+ (tic6x_arch_enable): Remove references to TIC6X_INSN_ATOMIC.
+ (s_tic6x_atomic, s_tic6x_noatomic): Remove functions.
+ (md_pseudo_table): Remove ".atomic" and ".noatomic".
+
+2011-01-31 Nick Clifton <nickc@redhat.com>
+
+ * write.c (write_contents): Include output file name and bfd error
+ value when reporting the inability to write to the output file.
+ * config/tc-rx.c (rx_handle_align): Do not insert NOPs into align
+ frag that has a non-zero fill value.
+
+2011-01-27 DJ Delorie <dj@redhat.com>
+
+ * config/tc-rx.c (md_convert_frag): If we can't compute the target
+ address, zero out the values stored in the object file to make
+ objdump's output consistent.
+
+2011-01-26 Kai Tietz <kai.tietz@onevision.com>
+
+ * config/tc-i386.c (md_begin): Set for x64 windows COFF target
+ x86_dwarf2_return_column to 32.
+
+2011-01-20 Nick Clifton <nickc@redhat.com>
+
+ PR gas/12384
+ * config/tc-h8300.c (constant_fits_width_p): Use correct type for
+ comparison.
+
+2011-01-18 H.J. Lu <hongjiu.lu@intel.com>
+
+ * write.c (compress_debug): Return if section size is smaller
+ than 32 bytes.
+
+2011-01-18 H.J. Lu <hongjiu.lu@intel.com>
+
+ PR gas/12409
+ * write.c (compress_debug): Return if section size is 0.
+
+2011-01-18 Mingfeng Wu <mingfeng@faraday-tech.com>
+
+ * config/tc-arm.c (arm_cpus): Add Faraday ARMv5TE compatible
+ cores: fa606te, fa616te, fmp626. Modify the VFP of fa626te.
+ * doc/c-arm.texi (ARM Options): Add -mcpu={fa606te, fa616te,
+ fmp626} options.
+
+2011-01-18 Nick Clifton <nickc@redhat.com>
+
+ PR gas/12390
+ * doc/all.texi: Add NS32K
+ * doc/as.texinfo: Remove target specific details of which
+ characters act as comment initiators and statement separators into
+ individual target specific files.
+ * doc/c-alpha.texi (Alpha-Chars): Document special behaviour of
+ the hash character at the start of a line.
+ * doc/c-arm.texi (ARM-Chars): Likewise.
+ * doc/c-avr.texi (AVR-Chars): Likewise.
+ * doc/c-d10v.texi (D10V-Chars): Likewise.
+ * doc/c-d30v.texi (D30V-Chars): Likewise.
+ * doc/c-mmix.texi (MMIX-Chars): Likewise.
+ * doc/c-s390.texi (s390 characters): Likewise.
+ * doc/c-sh.texi (SH-Chars): Likewise.
+ * doc/c-sh64.texi (SH64-Chars): Likewise.
+ * doc/c-sparc.texi (SPARC-Chars): Likewise.
+ * doc/c-tic6x.texi (TIC6X Syntax): Likewise.
+ * doc/c-xtensa.texi (Xtensa Syntax): Likewise.
+ * doc/c-z80.texi (Z80-Chars): Likewise.
+ * doc/c-z8k.texi (Z8000-Chars): Likewise.
+ * doc/c-pdp11.texi (PDP11-Syntax): Document line separator character.
+ * doc/c-arc.texi (ARC-Chars): Fill in this subsection.
+ * doc/c-bfin.texi (Blackfin Syntax): Document line comment and
+ line separator characters.
+ * doc/c-cr16.texi (CR16 Syntax): Likewise.
+ * doc/c-i386.texi (i386-Chars): Likewise.
+ * doc/c-i860.texi (i860-Chars): Likewise.
+ * doc/c-i960.texi (i960-Chars): Likewise.
+ * doc/c-ip2k.texi (IP2K-Chars): Likewise.
+ * doc/c-lm32.texi (LM32-Chars): likewise.
+ * doc/c-m32c.texi (M32C-Chars): Likewise.
+ * doc/c-m68hc11.texi (M68HC11-syntax): Likewise.
+ * doc/c-m68k.texi (M68K-Chars): Likewise.
+ * doc/c-microblaze.texi (MicroBlaze-Chars): Likewise.
+ * doc/c-msp430.texi (MSP430-Chars): Likewise.
+ * doc/c-mt.texi (MT-Chars): Likewise.
+ * doc/c-ns32k.texi (NS32K-Chars): Likewise.
+ * doc/c-pj.texi (PJ-Chars): Likewise.
+ * doc/c-ppc.texi (PowerPC-Chars): Likewise.
+ * doc/c-rx.texi (RX-Chars): Likewise.
+ * doc/c-score.texi (SCORE-Chars): Likewise.
+ * doc/c-tic54x.texi (TIC54X-Chars): Likewise.
+ * doc/c-v850.texi (V850-Chars): Likewise.
+ * doc/c-vax.texi (VAX-Chars): Likewise.
+ * doc/c-xc16x.texi (xc16x-Chars): Likewise.
+
+2011-01-17 Quentin Neill <quentin.neill@amd.com>
+
+ * config/tc-i386.c (cpu_arch): Add CPU_TBM_FLAGS.
+
+ * doc/c-i386.texi (i386-TBM): New section.
+
+2011-01-16 H.J. Lu <hongjiu.lu@intel.com>
+
+ * config/tc-i386.c (disallow_64bit_disp): Renamed to ...
+ (disallow_64bit_reloc): This.
+ (md_assemble): Don't check movabs for x32 mode here.
+ (i386_target_format): Updated.
+ (tc_gen_reloc): Check if 64bit relocations are allowed.
+
2011-01-15 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (disallow_64bit_disp): New.
projects / binutils-gdb.git / blobdiff