* write.c (write_relocs): Remove unused variable.
[binutils-gdb.git] / gas / ChangeLog
index 9adca8b78b5175389e4ff244ebe71b53777a0f69..f958f69f1a5928af05f20c2706f50bbb3ff56039 100644 (file)
@@ -1,6 +1,101 @@
+2003-04-07  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
+
+       * write.c (write_relocs): Remove unused variable.
+
+2003-04-06  Chris Demetriou  <cgd@broadcom.com>
+
+       * config/tc-mips.c (HAVE_64BIT_ADDRESS_CONSTANTS): New.
+       (macro): Use new macro to decide whether to emit constant address
+       as 32 or 64 bits if addresses are 32-bit wide but registers are
+       64-bit wide.
+
+2003-04-05  Stephane Carrez  <stcarrez@nerim.fr>
+
+       * config/tc-m68hc11.c (M6811_OP_CALL_ADDR): New internal define.
+       (M6811_OP_PAGE_ADDR): New internal define.
+       (get_operand): New modifier %page and %addr to obtain page and 
+       address part of a far-function.
+       (fixup8): Use BFD_RELOC_M68HC11_PAGE for a %page modifier; don't 
+       complain on overflow for the BFD_RELOC_M68HC11_PAGE and truncation
+       relocs.
+       (fixup16): Use BFD_RELOC_M68HC11_LO16 for a %addr modifier.
+       (find_opcode): Add comment.
+       (md_estimate_size_before_relax): Force relocation of
+       STATE_UNDEXED_OFFSET types when the symbol is not absolute.
+       (tc_m68hc11_fix_adjustable): Check for BFD_RELOC_M68HC11_LO16
+       instead of BFD_RELOC_LO16; temporarily make the BFD_RELOC_32
+       on the symbol itself so that DWARF2 strings are merged correctly.
+
+2003-04-04  Svein E. Seldal  <Svein.Seldal@solidas.com>
+
+       * config/obj-coff.h (TARGET_FORMAT): Namespace cleanup, changed
+       default tic4x target format to 'coff2-tic4x'.
+       * config/tc-tic4x.c: Namespace cleanup. Replace s/c4x/tic4x/ and
+       s/c3x/tic3x/
+       * config/tc-tic4x.h: Ditto
+
+2003-04-03  Nick Clifton  <nickc@redhat.com>
+
+       * NEWS: Mention support for Xtensa architecture.
+
+2003-04-02  Philip Blundell  <philb@gnu.org>
+
+       * config/tc-arm.c (arm_force_relocation): Return 0 for OFFSET_IMM.
+
+2003-04-02  Chris Demetriou  <cgd@broadcom.com>
+
+       * config/tc-mips.c (macro2): Adjust implementation of
+       M_ULH, M_ULHU, M_ULW, and M_ULD so that they work properly
+       in the case where the source and destination registers
+       are the same.
+
+2003-04-01  Bob Wilson  <bob.wilson@acm.org>
+
+        * Makefile.am (CPU_TYPES): Add xtensa.
+        (TARGET_CPU_CFILES): Add config/tc-xtensa.c.
+        (TARGET_CPU_HFILES): Add config/tc-xtensa.h.
+        (xtensa-relax.o): New target.
+        Run "make dep-am".
+        * Makefile.in: Regenerate.
+        * configure.in: Handle xtensa-*-*.  Add xtensa-relax.o to
+        extra_objects for xtensa targets.
+        * configure: Regenerate.
+        * write.c (write_object_file): Add new md_post_relax_hook.
+        * config/tc-xtensa.c: New file.
+        * config/tc-xtensa.h: Likewise.
+        * config/xtensa-istack.h: Likewise.
+        * config/xtensa-relax.c: Likewise.
+        * config/xtensa-relax.h: Likewise.
+        * doc/Makefile.am (CPU_DOCS): Add c-xtensa.texi.
+        * doc/Makefile.in: Regenerate.
+        * doc/all.texi: Set new XTENSA variable.
+        * doc/as.texinfo: Set new Xtensa variable.  Describe
+        Xtensa-specific options.  Define line comment character for
+        Xtensa.  Add Xtensa processors to list of ELF targets where
+        alignment is specified in bytes.  Add new Xtensa-Dependent node.
+        Add acknowledgements for those contributing to the Xtensa port.
+        * doc/internals.texi: Describe new md_post_relax_hook.
+        * doc/c-xtensa.texi: New file.
+
+
+2003-04-01  Nick Clifton  <nickc@redhat.com>
+           Richard Earnshaw  <rearnsha@arm.com>
+
+       * config/tc-arm.c: Remove presence of (r) and (tm) symbols.
+       (ARM_ARCH_IWMMXT): Simplify.
+       (insns): Place iwmmx instructions in correct place in table.
+       (arm_add_note): New function: Add a note entry to a .note section.
+       (md_begin): Make the default architecture be unknown.
+       Suppress the creation of an arm note section.
+
+2003-03-26  Eric Christopher  <echristo@redhat.com>
+
+       * config/tc-mips.c (nopic_need_relax): Check for
+        S_IS_EXTERN.
+
 2003-03-25  Stan Cox   <scox@redhat.com>
            Nick Clifton  <nickc@redhat.com>
-           
+
        Contribute support for Intel's iWMMXt chip - an ARM variant:
 
        * config/tc-arm.c: (ARM_CEXT_IWMMXT, ARM_ARCH_IWMMXT, WR_PREFIX,
        do_iwmmxt_wrwrwr, do_iwmmxt_wshufh, do_iwmmxt_wzero,
        cp_byte_address_offset, cp_byte_address_required_here,
        check_iwmmxt_insn): New functions.
-       (asm_opcode_insns): Add iWMMXt instructions.    
+       (asm_opcode_insns): Add iWMMXt instructions.
        (md_begin): Set the mach value for iWMMXt targets.  Create a note
        section to identify iwmmxt binaries.
        (md_apply_fix3): Handle BFD_RELOC_ARM_CP_OFF_IMM_S2.
        * doc/as.texinfo: Rename the all occurances of C54X to TIC54X.
        * doc/all.texi: Likewise.
        * doc/c-tic54x.texi: Likewise.
-       
+
 2003-03-21  Andreas Schwab  <schwab@suse.de>
 
        * config/tc-ia64.c (generate_unwind_image): Fix type of unw_rec to
 2003-03-04  Dmitry Diky  <diwil@mail.ru>
 
        * config/tc-msp430.c (mcu_types): Add recently announced x1122
-       and x1123 devices, add missed x437. 
+       and x1123 devices, add missed x437.
        (md_show_usage): Sort device list.
 
 2003-03-03  J"orn Rennecke <joern.rennecke@superh.com>
        Output main source file dirname before its filename.
 
 2003-01-28    Dmitry Diky <diwil@mail.ru>
-       
+
        * config/tc-msp430.c: Replace occurences of 'tolower' with
        'TOLOWER'.
 
 
 2002-12-16  Andrew MacLeod  <amacleod@redhat.com>
 
-       * config/tc-xstormy16.c (md_cgen_lookup_reloc): If a relocation 
+       * config/tc-xstormy16.c (md_cgen_lookup_reloc): If a relocation
        has already been set up, use it.
 
 2002-12-16  Kazu Hirata  <kazu@cs.umass.edu>