TARG_CPU = @target_cpu_type@
TARG_CPU_C = $(srcdir)/config/tc-@target_cpu_type@.c
-TARG_CPU_O = tc-@target_cpu_type@.o
+TARG_CPU_O = tc-@target_cpu_type@.@OBJEXT@
TARG_CPU_H = $(srcdir)/config/tc-@target_cpu_type@.h
OBJ_FORMAT_C = $(srcdir)/config/obj-@obj_format@.c
-OBJ_FORMAT_O = obj-@obj_format@.o
+OBJ_FORMAT_O = obj-@obj_format@.@OBJEXT@
OBJ_FORMAT_H = $(srcdir)/config/obj-@obj_format@.h
TARG_ENV_H = $(srcdir)/config/te-@te_file@.h
ATOF_TARG_C = $(srcdir)/config/atof-@atof@.c
-ATOF_TARG_O = atof-@atof@.o
+ATOF_TARG_O = atof-@atof@.@OBJEXT@
# use @target_cpu_type@ for refering to configured target name
IT_HDRS=itbl-parse.h $(srcdir)/itbl-ops.h
IT_SRCS=itbl-parse.c itbl-lex.c $(srcdir)/itbl-ops.c
IT_DEPS=$(srcdir)/itbl-parse.y $(srcdir)/itbl-lex.l $(srcdir)/config/itbl-@target_cpu_type@.h
-IT_OBJS=itbl-parse.o itbl-lex.o itbl-ops.o
-
-# CPU types. This is only used for dependency information.
-
-CPU_TYPES = \
- alpha \
- arc \
- arm \
- avr \
- bfin \
- cr16 \
- cris \
- crx \
- d10v \
- d30v \
- dlx \
- fr30 \
- frv \
- h8300 \
- hppa \
- i370 \
- i386 \
- i860 \
- i960 \
- ia64 \
- ip2k \
- lm32 \
- m32c \
- m32r \
- m68hc11 \
- m68k \
- maxq \
- mcore \
- mep \
- microblaze \
- mips \
- mmix \
- mn10200 \
- mn10300 \
- msp430 \
- mt \
- ns32k \
- openrisc \
- or32 \
- pdp11 \
- pj \
- ppc \
- s390 \
- score \
- sh \
- sh64 \
- sparc \
- spu \
- tic30 \
- tic4x \
- tic54x \
- v850 \
- vax \
- xc16x \
- xstormy16 \
- xtensa \
- z80 \
- z8k
-
-# Object format types. This is only used for dependency information.
-# We deliberately omit SOM, since it does not work as a cross assembler.
-
-OBJ_FORMATS = \
- aout \
- coff \
- ecoff \
- elf \
- evax \
- macho
-
-# This is an sh case which sets valid according to whether the CPU
-# type in the shell variable c and the OS type in the shell variable o
-# are supported. This helps cuts down on the amount of dependency
-# information.
-
-CPU_OBJ_VALID = \
- valid= ; \
- case $$o in \
- aout) \
- case $$c in \
- arm | cris | i386 | m68k | ns32k | pdp11 | sparc | tic30 | vax) \
- valid=yes ;; \
- esac ;; \
- coff) \
- case $$c in \
- arm | h8300 | i386 | i960 | m68k | maxq | mcore | mips | or32 \
- | ppc | sh | sparc | tic* | xscale | z80 | z8k) \
- valid=yes ;; \
- esac ;; \
- ecoff) \
- case $$c in \
- mips | alpha) valid=yes ;; \
- esac ;; \
- elf) valid=yes ; \
- case $$c in \
- maxq | ns32k | tic* | z80 | z8k) valid= ;; \
- esac ;; \
- evax) \
- case $$c in \
- alpha) valid=yes ;; \
- esac ;; \
- macho) \
- case $$c in \
- i386) valid=yes ;; \
- esac ;; \
- vms) \
- case $$c in \
- vax) valid=yes ;; \
- esac ;; \
- esac;
-
-# These are like CPU_TYPES and CPU_OBJ_VALID, for the obj=multi case.
-
-MULTI_CPU_TYPES = i386 mips cris
-
-MULTI_CPU_OBJ_VALID = \
- valid= ; \
- case $$o in \
- aout) \
- case $$c in \
- i386 | cris) valid=yes ;; \
- esac ;; \
- coff) \
- case $$c in \
- i386 | mips) valid=yes ;; \
- esac ;; \
- ecoff) \
- case $$c in \
- mips) valid=yes ;; \
- esac ;; \
- elf) valid=yes ;; \
- esac;
+IT_OBJS=itbl-parse.@OBJEXT@ itbl-lex.@OBJEXT@ itbl-ops.@OBJEXT@
+
# Regular source files.
config/tc-m32r.c \
config/tc-m68hc11.c \
config/tc-m68k.c \
- config/tc-maxq.c \
config/tc-mcore.c \
config/tc-mep.c \
config/tc-microblaze.c \
config/tc-pdp11.c \
config/tc-pj.c \
config/tc-ppc.c \
+ config/tc-rx.c \
config/tc-s390.c \
config/tc-score.c \
config/tc-sh.c \
config/tc-tic30.c \
config/tc-tic4x.c \
config/tc-tic54x.c \
+ config/tc-tic6x.c \
config/tc-vax.c \
config/tc-v850.c \
config/tc-xstormy16.c \
config/tc-m32r.h \
config/tc-m68hc11.h \
config/tc-m68k.h \
- config/tc-maxq.h \
config/tc-mcore.h \
config/tc-mep.h \
config/tc-microblaze.h \
config/tc-pdp11.h \
config/tc-pj.h \
config/tc-ppc.h \
+ config/tc-rx.h \
config/tc-s390.h \
config/tc-score.h \
config/tc-sh.h \
config/tc-tic30.h \
config/tc-tic4x.h \
config/tc-tic54x.h \
+ config/tc-tic6x.h \
config/tc-vax.h \
config/tc-v850.h \
config/tc-xstormy16.h \
config/te-vxworks.h \
config/te-wince-pe.h
+TARG_ENV_CFILES = \
+ config/te-vms.c
+
# Multi files in config
MULTI_CFILES = \
$(extra_objects)
GENERIC_OBJS = \
- app.o \
- as.o \
- atof-generic.o \
- cond.o \
- depend.o \
- dwarf2dbg.o \
- dw2gencfi.o \
- ehopt.o \
- expr.o \
- flonum-konst.o \
- flonum-copy.o \
- flonum-mult.o \
- frags.o \
- hash.o \
- input-file.o \
- input-scrub.o \
- literal.o \
- messages.o \
- output-file.o \
- read.o \
- remap.o \
- subsegs.o \
- symbols.o \
- write.o \
- listing.o \
- ecoff.o \
- stabs.o \
- sb.o \
- macro.o
+ app.@OBJEXT@ \
+ as.@OBJEXT@ \
+ atof-generic.@OBJEXT@ \
+ cond.@OBJEXT@ \
+ depend.@OBJEXT@ \
+ dwarf2dbg.@OBJEXT@ \
+ dw2gencfi.@OBJEXT@ \
+ ehopt.@OBJEXT@ \
+ expr.@OBJEXT@ \
+ flonum-konst.@OBJEXT@ \
+ flonum-copy.@OBJEXT@ \
+ flonum-mult.@OBJEXT@ \
+ frags.@OBJEXT@ \
+ hash.@OBJEXT@ \
+ input-file.@OBJEXT@ \
+ input-scrub.@OBJEXT@ \
+ literal.@OBJEXT@ \
+ messages.@OBJEXT@ \
+ output-file.@OBJEXT@ \
+ read.@OBJEXT@ \
+ remap.@OBJEXT@ \
+ subsegs.@OBJEXT@ \
+ symbols.@OBJEXT@ \
+ write.@OBJEXT@ \
+ listing.@OBJEXT@ \
+ ecoff.@OBJEXT@ \
+ stabs.@OBJEXT@ \
+ sb.@OBJEXT@ \
+ macro.@OBJEXT@
CONFIG_ATOF_CFILES = \
config/atof-ieee.c \
OBJS = $(CONFIG_OBJS) $(GENERIC_OBJS)
-POTFILES = $(MULTI_CFILES) $(CONFIG_ATOF_CFILES) $(TARG_ENV_HFILES) $(OBJ_FORMAT_HFILES) \
+POTFILES = $(MULTI_CFILES) $(CONFIG_ATOF_CFILES) \
+ $(TARG_ENV_HFILES) $(TARG_ENV_CFILES) $(OBJ_FORMAT_HFILES) \
$(OBJ_FORMAT_CFILES) $(TARGET_CPU_HFILES) $(TARGET_CPU_CFILES) \
$(HFILES) $(CFILES)
po/POTFILES.in: @MAINT@ Makefile
EXTRA_SCRIPTS = .gdbinit
EXTRA_DIST = m68k-parse.c itbl-parse.c itbl-parse.h itbl-lex.c \
- bfin-parse.c bfin-parse.h bfin-lex.c
+ bfin-parse.c bfin-parse.h bfin-lex.c \
+ rx-parse.c rx-parse.h
diststuff: $(EXTRA_DIST) info
GASLIBS = @OPCODES_LIB@ ../bfd/libbfd.la ../libiberty/libiberty.a
# Files to be copied away after each stage in building.
-STAGESTUFF = *.o $(noinst_PROGRAMS)
+STAGESTUFF = *.@OBJEXT@ $(noinst_PROGRAMS)
as_new_SOURCES = $(GAS_CFILES)
as_new_LDADD = $(TARG_CPU_O) $(OBJ_FORMAT_O) $(ATOF_TARG_O) \
$(extra_objects) $(GASLIBS) $(LIBINTL_DEP)
EXTRA_as_new_SOURCES = $(CFILES) $(HFILES) $(TARGET_CPU_CFILES) \
$(TARGET_CPU_HFILES) $(OBJ_FORMAT_CFILES) $(OBJ_FORMAT_HFILES) \
- $(CONFIG_ATOF_CFILES) $(MULTI_CFILES)
+ $(TARG_ENV_CFILES) $(CONFIG_ATOF_CFILES) $(MULTI_CFILES)
EXPECT = expect
RUNTEST = runtest
else true; fi
# Disable -Werror, if it has been enabled, since old versions of bison/
# yacc will produce working code which contain compile time warnings.
-m68k-parse.o: m68k-parse.c
+m68k-parse.@OBJEXT@: m68k-parse.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ m68k-parse.c $(NO_WERROR)
+ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f m68k-parse.c || echo $(srcdir)/`m68k-parse.c $(NO_WERROR)
mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='m68k-parse.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c m68k-parse.c $(NO_WERROR)
+ $(COMPILE) -c `test -f m68k-parse.c || echo $(srcdir)/`m68k-parse.c $(NO_WERROR)
endif
# Don't let the .y.h rule clobber m68k-parse.h.
bfin-parse.c: $(srcdir)/config/bfin-parse.y
$(SHELL) $(YLWRAP) $(srcdir)/config/bfin-parse.y y.tab.c bfin-parse.c y.tab.h bfin-parse.h -- $(YACCCOMPILE) -d ;
bfin-parse.h: bfin-parse.c
-bfin-parse.o: bfin-parse.c bfin-parse.h $(srcdir)/config/bfin-defs.h \
+bfin-parse.@OBJEXT@: bfin-parse.c \
+ $(srcdir)/config/bfin-aux.h $(srcdir)/config/bfin-defs.h \
$(INCDIR)/elf/common.h $(INCDIR)/elf/bfin.h $(BFDDIR)/libbfd.h
-bfin-defs.h: ; @true
-$(srcdir)/config/bfin-defs.h: ; @true
+bfin-parse.h: ; @true
+$(srcdir)/config/bfin-parse.h: ; @true
bfin-lex.c: $(srcdir)/config/bfin-lex.l
$(SHELL) $(YLWRAP) $(srcdir)/config/bfin-lex.l lex.yy.c bfin-lex.c -- $(LEXCOMPILE)
-bfin-lex.o: bfin-lex.c
+bfin-lex.@OBJEXT@: bfin-lex.c bfin-parse.h $(srcdir)/config/bfin-defs.h
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ bfin-lex.c $(NO_WERROR)
+ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f bfin-lex.c || echo $(srcdir)/`bfin-lex.c $(NO_WERROR)
mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='bfin-lex.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c bfin-lex.c $(NO_WERROR)
+ $(COMPILE) -c `test -f bfin-lex.c || echo $(srcdir)/`bfin-lex.c $(NO_WERROR)
endif
+rx-parse.c: $(srcdir)/config/rx-parse.y
+ $(SHELL) $(YLWRAP) $(srcdir)/config/rx-parse.y y.tab.c rx-parse.c y.tab.h rx-parse.h -- $(YACCCOMPILE) -d ;
+rx-parse.h: rx-parse.c
+rx-parse.@OBJEXT@: rx-parse.c rx-parse.h $(srcdir)/config/rx-defs.h \
+ $(INCDIR)/elf/common.h $(INCDIR)/elf/rx.h $(BFDDIR)/libbfd.h
+
+rx-defs.h: ; @true
+$(srcdir)/config/rx-defs.h: ; @true
+
# The instruction table specification lexical analyzer and parser.
# Disable -Werror, if it has been enabled, since old versions of bison/
# yacc will produce working code which contain compile time warnings.
-itbl-lex.o: itbl-lex.c
+itbl-lex.@OBJEXT@: itbl-lex.c itbl-parse.h
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ itbl-lex.c $(NO_WERROR)
+ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f itbl-lex.c || echo $(srcdir)/`itbl-lex.c $(NO_WERROR)
mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='itbl-lex.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c itbl-lex.c $(NO_WERROR)
+ $(COMPILE) -c `test -f itbl-lex.c || echo $(srcdir)/`itbl-lex.c $(NO_WERROR)
endif
# Disable -Werror, if it has been enabled, since old versions of bison/
# yacc will produce working code which contain compile time warnings.
-itbl-parse.o: itbl-parse.c
+itbl-parse.@OBJEXT@: itbl-parse.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ itbl-parse.c $(NO_WERROR)
+ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f itbl-parse.c || echo $(srcdir)/`itbl-parse.c $(NO_WERROR)
mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='itbl-parse.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c itbl-parse.c $(NO_WERROR)
+ $(COMPILE) -c `test -f itbl-parse.c || echo $(srcdir)/`itbl-parse.c $(NO_WERROR)
endif
-itbl-parse.c itbl-parse.h: $(srcdir)/itbl-parse.y
+itbl-parse.c: $(srcdir)/itbl-parse.y
$(SHELL) $(YLWRAP) $(srcdir)/itbl-parse.y y.tab.c itbl-parse.c y.tab.h itbl-parse.h -- $(YACCCOMPILE) -d
+itbl-parse.h: itbl-parse.c ; @true
+
+itbl-ops.@OBJEXT@: itbl-parse.h
+
# stand-alone itbl assembler & disassembler
EXTRA_PROGRAMS = itbl-test
itbl_test_SOURCES = itbl-parse.y itbl-lex.l
-itbl_test_LDADD = itbl-tops.o itbl-test.o $(GASLIBS) @LEXLIB@
+itbl_test_LDADD = itbl-tops.@OBJEXT@ itbl-test.@OBJEXT@ $(GASLIBS) @LEXLIB@
-itbl-tops.o: itbl-ops.c
+itbl-tops.@OBJEXT@: itbl-ops.c itbl-parse.h
if am__fastdepCC
$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -o $@ -c -DSTAND_ALONE $(srcdir)/itbl-ops.c
mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
$(COMPILE) -o $@ -DSTAND_ALONE -c $(srcdir)/itbl-ops.c
endif
-itbl-test.o: $(srcdir)/testsuite/gas/all/itbl-test.c
+itbl-test.@OBJEXT@: $(srcdir)/testsuite/gas/all/itbl-test.c
if am__fastdepCC
$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ -DSTAND_ALONE $(srcdir)/testsuite/gas/all/itbl-test.c
mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
CGEN_CPU_PREFIX = @cgen_cpu_prefix@
-cgen.o: cgen.c cgen.h cgen-desc.h subsegs.h \
+cgen.@OBJEXT@: cgen.c cgen.h cgen-desc.h subsegs.h \
$(INCDIR)/obstack.h $(INCDIR)/opcode/cgen.h \
$(srcdir)/../opcodes/$(CGEN_CPU_PREFIX)-desc.h \
$(srcdir)/../opcodes/$(CGEN_CPU_PREFIX)-opc.h
# Remake the info files.
MOSTLYCLEANFILES = $(STAGESTUFF) core \
- testsuite/*.o testsuite/*.out testsuite/gas.log testsuite/gas.sum \
+ testsuite/*.@OBJEXT@ testsuite/*.out testsuite/gas.log testsuite/gas.sum \
testsuite/site.exp site.bak site.exp stage stage1 stage2
.PHONY: install-exec-local install-data-local
# temporary assembly file names.
comparison:
x=0 ; \
- for file in *.o ; do \
+ for file in *.@OBJEXT@ ; do \
tail +16c ./$$file > tmp-foo1; \
if tail +16c ${against}/$$file > tmp-foo2 2>/dev/null ; then \
if cmp tmp-foo1 tmp-foo2 ; then \