/* tc-mips.c -- assemble code for a MIPS chip.
- Copyright (C) 1993, 1994, 1995, 1996, 1997 Free Software Foundation, Inc.
+ Copyright (C) 1993, 94, 95, 96, 97, 98, 1999, 2000 Free Software Foundation, Inc.
Contributed by the OSF and Ralph Campbell.
Written by Keith Knowles and Ralph Campbell, working independently.
Modified for ECOFF and R4000 support by Ian Lance Taylor of Cygnus
#endif
#include "opcode/mips.h"
+#include "itbl-ops.h"
+
+#ifdef DEBUG
+#define DBG(x) printf x
+#else
+#define DBG(x)
+#endif
#ifdef OBJ_MAYBE_ELF
/* Clean up namespace so we can include obj-elf.h too. */
+static int mips_output_flavor PARAMS ((void));
static int mips_output_flavor () { return OUTPUT_FLAVOR; }
#undef OBJ_PROCESS_STAB
#undef OUTPUT_FLAVOR
#undef S_GET_SIZE
#undef S_SET_ALIGN
#undef S_SET_SIZE
-#undef TARGET_SYMBOL_FIELDS
#undef obj_frob_file
#undef obj_frob_file_after_relocs
#undef obj_frob_symbol
#undef obj_pop_insert
#undef obj_sec_sym_ok_for_reloc
+#undef OBJ_COPY_SYMBOL_ATTRIBUTES
#include "obj-elf.h"
/* Fix any of them that we actually care about. */
#define ILLEGAL_REG (32)
+/* Allow override of standard little-endian ECOFF format. */
+
+#ifndef ECOFF_LITTLE_FORMAT
+#define ECOFF_LITTLE_FORMAT "ecoff-littlemips"
+#endif
+
extern int target_big_endian;
/* 1 is we should use the 64 bit MIPS ELF ABI, 0 if we should use the
- 32 bit ABI. This has no meaning for ECOFF. */
+ 32 bit ABI. This has no meaning for ECOFF.
+ Note that the default is always 32 bit, even if "configured" for
+ 64 bit [e.g. --target=mips64-elf]. */
static int mips_64;
/* The default target format to use. */
case bfd_target_aout_flavour:
return target_big_endian ? "a.out-mips-big" : "a.out-mips-little";
case bfd_target_ecoff_flavour:
- return target_big_endian ? "ecoff-bigmips" : "ecoff-littlemips";
+ return target_big_endian ? "ecoff-bigmips" : ECOFF_LITTLE_FORMAT;
+ case bfd_target_coff_flavour:
+ return "pe-mips";
case bfd_target_elf_flavour:
return (target_big_endian
? (mips_64 ? "elf64-bigmips" : "elf32-bigmips")
: (mips_64 ? "elf64-littlemips" : "elf32-littlemips"));
default:
abort ();
+ return NULL;
}
}
? ".data" \
: OUTPUT_FLAVOR == bfd_target_ecoff_flavour \
? ".rdata" \
+ : OUTPUT_FLAVOR == bfd_target_coff_flavour \
+ ? ".rdata" \
: OUTPUT_FLAVOR == bfd_target_elf_flavour \
? ".rodata" \
: (abort (), ""))
+/* This is the set of options which may be modified by the .set
+ pseudo-op. We use a struct so that .set push and .set pop are more
+ reliable. */
+
+struct mips_set_options
+{
+ /* MIPS ISA (Instruction Set Architecture) level. This is set to -1
+ if it has not been initialized. Changed by `.set mipsN', and the
+ -mipsN command line option, and the default CPU. */
+ int isa;
+ /* Whether we are assembling for the mips16 processor. 0 if we are
+ not, 1 if we are, and -1 if the value has not been initialized.
+ Changed by `.set mips16' and `.set nomips16', and the -mips16 and
+ -nomips16 command line options, and the default CPU. */
+ int mips16;
+ /* Non-zero if we should not reorder instructions. Changed by `.set
+ reorder' and `.set noreorder'. */
+ int noreorder;
+ /* Non-zero if we should not permit the $at ($1) register to be used
+ in instructions. Changed by `.set at' and `.set noat'. */
+ int noat;
+ /* Non-zero if we should warn when a macro instruction expands into
+ more than one machine instruction. Changed by `.set nomacro' and
+ `.set macro'. */
+ int warn_about_macros;
+ /* Non-zero if we should not move instructions. Changed by `.set
+ move', `.set volatile', `.set nomove', and `.set novolatile'. */
+ int nomove;
+ /* Non-zero if we should not optimize branches by moving the target
+ of the branch into the delay slot. Actually, we don't perform
+ this optimization anyhow. Changed by `.set bopt' and `.set
+ nobopt'. */
+ int nobopt;
+ /* Non-zero if we should not autoextend mips16 instructions.
+ Changed by `.set autoextend' and `.set noautoextend'. */
+ int noautoextend;
+};
+
+/* This is the struct we use to hold the current set of options. Note
+ that we must set the isa and mips16 fields to -1 to indicate that
+ they have not been initialized. */
+
+static struct mips_set_options mips_opts = { -1, -1, 0, 0, 0, 0, 0, 0 };
+
/* These variables are filled in with the masks of registers used.
The object format code reads them and puts them in the appropriate
place. */
unsigned long mips_gprmask;
unsigned long mips_cprmask[4];
-/* MIPS ISA (Instruction Set Architecture) level (may be changed
- temporarily using .set mipsN). */
-static int mips_isa = -1;
-
/* MIPS ISA we are using for this output file. */
static int file_mips_isa;
-/* Whether we are assembling for the mips16 processor. */
-static int mips16 = -1;
-
/* The CPU type as a number: 2000, 3000, 4000, 4400, etc. */
static int mips_cpu = -1;
-/* Whether the 4650 instructions (mad/madu) are permitted. */
-static int mips_4650 = -1;
-
-/* Whether the 4010 instructions are permitted. */
-static int mips_4010 = -1;
-
-/* Whether the 4100 MADD16 and DMADD16 are permitted. */
-static int mips_4100 = -1;
-
-/* Whether the processor uses hardware interlocks, and thus does not
- require nops to be inserted. */
-static int interlocks = -1;
-
-/* As with "interlocks" this is used by hardware that has FP
+/* The argument of the -mabi= flag. */
+static char* mips_abi_string = 0;
+
+/* Wether we should mark the file EABI64 or EABI32. */
+static int mips_eabi64 = 0;
+
+/* If they asked for mips1 or mips2 and a cpu that is
+ mips3 or greater, then mark the object file 32BITMODE. */
+static int mips_32bitmode = 0;
+
+/* True if -mgp32 was passed. */
+static int mips_gp32 = 0;
+
+/* Some ISA's have delay slots for instructions which read or write
+ from a coprocessor (eg. mips1-mips3); some don't (eg mips4).
+ Return true if instructions marked INSN_LOAD_COPROC_DELAY,
+ INSN_COPROC_MOVE_DELAY, or INSN_WRITE_COND_CODE actually have a
+ delay slot in this ISA. The uses of this macro assume that any
+ ISA that has delay slots for one of these, has them for all. They
+ also assume that ISAs which don't have delays for these insns, don't
+ have delays for the INSN_LOAD_MEMORY_DELAY instructions either. */
+#define ISA_HAS_COPROC_DELAYS(ISA) ( \
+ (ISA) == 1 \
+ || (ISA) == 2 \
+ || (ISA) == 3 \
+ )
+
+/* Return true if ISA supports 64 bit gp register instructions. */
+#define ISA_HAS_64BIT_REGS(ISA) ( \
+ (ISA) == 3 \
+ || (ISA) == 4 \
+ )
+
+/* Whether the processor uses hardware interlocks to protect
+ reads from the HI and LO registers, and thus does not
+ require nops to be inserted.
+
+ FIXME: GCC makes a distinction between -mcpu=FOO and -mFOO:
+ -mcpu=FOO schedules for FOO, but still produces code that meets the
+ requirements of MIPS ISA I. For example, it won't generate any
+ FOO-specific instructions, and it will still assume that any
+ scheduling hazards described in MIPS ISA I are there, even if FOO
+ has interlocks. -mFOO gives GCC permission to generate code that
+ will only run on a FOO; it will generate FOO-specific instructions,
+ and assume interlocks provided by a FOO.
+
+ However, GAS currently doesn't make this distinction; before Jan 28
+ 1999, GAS's -mcpu=FOO implied -mFOO, which violates GCC's
+ assumptions. The GCC driver passes these flags through to GAS, so
+ if GAS actually does anything that doesn't meet MIPS ISA I with
+ -mFOO, then GCC's -mcpu=FOO flag isn't going to work.
+
+ And furthermore, it did not assume that -mFOO implied -mcpu=FOO,
+ which seems senseless --- why generate code which will only run on
+ a FOO, but schedule for something else?
+
+ So now, at least, -mcpu=FOO and -mFOO are exactly equivalent.
+
+ -- Jim Blandy <jimb@cygnus.com> */
+
+#define hilo_interlocks (mips_cpu == 4010 \
+ )
+
+/* Whether the processor uses hardware interlocks to protect reads
+ from the GPRs, and thus does not require nops to be inserted. */
+#define gpr_interlocks \
+ (mips_opts.isa != 1 \
+ || mips_cpu == 3900)
+
+/* As with other "interlocks" this is used by hardware that has FP
(co-processor) interlocks. */
-static int cop_interlocks = -1;
+/* Itbl support may require additional care here. */
+#define cop_interlocks (mips_cpu == 4300 \
+ )
+
+/* Is this a mfhi or mflo instruction? */
+#define MF_HILO_INSN(PINFO) \
+ ((PINFO & INSN_READ_HI) || (PINFO & INSN_READ_LO))
/* MIPS PIC level. */
instructions. */
static int mips_trap;
-/* 1 if we should autoextend mips16 instructions. */
-static int mips16_autoextend = 1;
+/* Non-zero if any .set noreorder directives were used. */
-static int mips_warn_about_macros;
-static int mips_noreorder;
static int mips_any_noreorder;
-static int mips_nomove;
-static int mips_noat;
-static int mips_nobopt;
+
+/* Non-zero if nops should be inserted when the register referenced in
+ an mfhi/mflo instruction is read in the next two instructions. */
+static int mips_7000_hilo_fix;
/* The size of the small data section. */
static int g_switch_value = 8;
better.
This function can only provide a guess, but it seems to work for
- gcc output. If it guesses wrong, the only loss should be in
- efficiency; it shouldn't introduce any bugs.
+ gcc output. It needs to guess right for gcc, otherwise gcc
+ will put what it thinks is a GP-relative instruction in a branch
+ delay slot.
I don't know if a fix is needed for the SVR4_PIC mode. I've only
fixed it for the non-PIC mode. KR 95/04/07 */
-static int nopic_need_relax PARAMS ((symbolS *));
+static int nopic_need_relax PARAMS ((symbolS *, int));
/* handle of the OPCODE hash table */
static struct hash_control *op_hash = NULL;
/* If we don't want information for prev_insn or prev_prev_insn, we
point the insn_mo field at this dummy integer. */
-static const struct mips_opcode dummy_opcode = { 0 };
+static const struct mips_opcode dummy_opcode = { NULL, NULL, 0, 0, 0, 0 };
/* Non-zero if prev_insn is valid. */
static int prev_insn_valid;
noreorder. */
static int prev_prev_insn_unreordered;
+/* If this is set, it points to a frag holding nop instructions which
+ were inserted before the start of a noreorder section. If those
+ nops turn out to be unnecessary, the size of the frag can be
+ decreased. */
+static fragS *prev_nop_frag;
+
+/* The number of nop instructions we created in prev_nop_frag. */
+static int prev_nop_frag_holds;
+
+/* The number of nop instructions that we know we need in
+ prev_nop_frag. */
+static int prev_nop_frag_required;
+
+/* The number of instructions we've seen since prev_nop_frag. */
+static int prev_nop_frag_since;
+
/* For ECOFF and ELF, relocations against symbols are done in two
parts, with a HI relocation and a LO relocation. Each relocation
has only 16 bits of space to store an addend. This means that in
#ifdef __STDC__
#define internalError() \
- as_fatal ("internal Error, line %d, %s", __LINE__, __FILE__)
+ as_fatal (_("internal Error, line %d, %s"), __LINE__, __FILE__)
#else
-#define internalError() as_fatal ("MIPS internal Error");
+#define internalError() as_fatal (_("MIPS internal Error"));
#endif
enum mips_regclass { MIPS_GR_REG, MIPS_FP_REG, MIPS16_REG };
static int insn_uses_reg PARAMS ((struct mips_cl_insn *ip,
unsigned int reg, enum mips_regclass class));
static int reg_needs_delay PARAMS ((int));
+static void mips16_mark_labels PARAMS ((void));
static void append_insn PARAMS ((char *place,
struct mips_cl_insn * ip,
expressionS * p,
bfd_reloc_code_real_type r,
boolean));
-static void mips_no_prev_insn PARAMS ((void));
+static void mips_no_prev_insn PARAMS ((int));
static void mips_emit_delays PARAMS ((boolean));
#ifdef USE_STDARG
static void macro_build PARAMS ((char *place, int *counter, expressionS * ep,
static void s_cprestore PARAMS ((int));
static void s_gpword PARAMS ((int));
static void s_cpadd PARAMS ((int));
+static void s_insn PARAMS ((int));
static void md_obj_begin PARAMS ((void));
static void md_obj_end PARAMS ((void));
static long get_number PARAMS ((void));
-static void s_ent PARAMS ((int));
-static void s_mipsend PARAMS ((int));
+static void s_mips_ent PARAMS ((int));
+static void s_mips_end PARAMS ((int));
+static void s_mips_frame PARAMS ((int));
+static void s_mips_mask PARAMS ((int));
+static void s_mips_stab PARAMS ((int));
+static void s_mips_weakext PARAMS ((int));
static void s_file PARAMS ((int));
static int mips16_extended_frag PARAMS ((fragS *, asection *, long));
+
+
+static int validate_mips_insn PARAMS ((const struct mips_opcode *));
\f
/* Pseudo-op table.
not MIPS CPU specific, but are also not specific to the object file
format. This file is probably the best place to define them, but
they are not currently supported: .asm0, .endr, .lab, .repeat,
- .struct, .weakext. */
+ .struct. */
static const pseudo_typeS mips_pseudo_table[] =
{
{"cprestore", s_cprestore, 0},
{"gpword", s_gpword, 0},
{"cpadd", s_cpadd, 0},
+ {"insn", s_insn, 0},
/* Relatively generic pseudo-ops that happen to be used on MIPS
chips. */
{"err", s_err, 0},
{"half", s_cons, 1},
{"dword", s_cons, 3},
+ {"weakext", s_mips_weakext, 0},
/* These pseudo-ops are defined in read.c, but must be overridden
here for one reason or another. */
{"quad", s_cons, 3},
{"short", s_cons, 1},
{"single", s_float_cons, 'f'},
+ {"stabn", s_mips_stab, 'n'},
{"text", s_change_sec, 't'},
{"word", s_cons, 2},
- { 0 },
+ { NULL, NULL, 0 },
};
static const pseudo_typeS mips_nonecoff_pseudo_table[] = {
/* These pseudo-ops should be defined by the object file format.
However, a.out doesn't support them, so we have versions here. */
- {"aent", s_ent, 1},
+ {"aent", s_mips_ent, 1},
{"bgnb", s_ignore, 0},
- {"end", s_mipsend, 0},
+ {"end", s_mips_end, 0},
{"endb", s_ignore, 0},
- {"ent", s_ent, 0},
+ {"ent", s_mips_ent, 0},
{"file", s_file, 0},
- {"fmask", s_ignore, 'F'},
- {"frame", s_ignore, 0},
+ {"fmask", s_mips_mask, 'F'},
+ {"frame", s_mips_frame, 0},
{"loc", s_ignore, 0},
- {"mask", s_ignore, 'R'},
+ {"mask", s_mips_mask, 'R'},
{"verstamp", s_ignore, 0},
- { 0 },
+ { NULL, NULL, 0 },
};
extern void pop_insert PARAMS ((const pseudo_typeS *));
static boolean mips16_small, mips16_ext;
+#ifdef MIPS_STABS_ELF
+/* The pdr segment for per procedure frame/regmask info */
+
+static segT pdr_seg;
+#endif
+
/*
* This function is called once, at assembler startup time. It should
* set up all the tables, etc. that the MD part of the assembler will need.
boolean ok = false;
register const char *retval = NULL;
register unsigned int i = 0;
+ const char *cpu;
+ char *a = NULL;
+ int broken = 0;
+ int mips_isa_from_cpu;
- if (mips_isa == -1)
+ /* GP relative stuff not working for PE */
+ if (strncmp (TARGET_OS, "pe", 2) == 0
+ && g_switch_value != 0)
{
- const char *cpu;
- char *a = NULL;
+ if (g_switch_seen)
+ as_bad (_("-G not supported in this configuration."));
+ g_switch_value = 0;
+ }
- cpu = TARGET_CPU;
- if (strcmp (cpu + (sizeof TARGET_CPU) - 3, "el") == 0)
- {
- a = xmalloc (sizeof TARGET_CPU);
- strcpy (a, TARGET_CPU);
- a[(sizeof TARGET_CPU) - 3] = '\0';
- cpu = a;
- }
+ cpu = TARGET_CPU;
+ if (strcmp (cpu + (sizeof TARGET_CPU) - 3, "el") == 0)
+ {
+ a = xmalloc (sizeof TARGET_CPU);
+ strcpy (a, TARGET_CPU);
+ a[(sizeof TARGET_CPU) - 3] = '\0';
+ cpu = a;
+ }
+
+ if (mips_cpu < 0)
+ {
+ /* Set mips_cpu based on TARGET_CPU, unless TARGET_CPU is
+ just the generic 'mips', in which case set mips_cpu based
+ on the given ISA, if any. */
if (strcmp (cpu, "mips") == 0)
- {
- mips_isa = 1;
- if (mips_cpu == -1)
- mips_cpu = 3000;
- }
+ {
+ if (mips_opts.isa < 0)
+ mips_cpu = 3000;
+
+ else if (mips_opts.isa == 2)
+ mips_cpu = 6000;
+
+ else if (mips_opts.isa == 3)
+ mips_cpu = 4000;
+
+ else if (mips_opts.isa == 4)
+ mips_cpu = 8000;
+
+ else
+ mips_cpu = 3000;
+ }
+
+ else if (strcmp (cpu, "r3900") == 0
+ || strcmp (cpu, "mipstx39") == 0
+ )
+ mips_cpu = 3900;
+
else if (strcmp (cpu, "r6000") == 0
|| strcmp (cpu, "mips2") == 0)
- {
- mips_isa = 2;
- if (mips_cpu == -1)
- mips_cpu = 6000;
- }
+ mips_cpu = 6000;
+
else if (strcmp (cpu, "mips64") == 0
|| strcmp (cpu, "r4000") == 0
|| strcmp (cpu, "mips3") == 0)
- {
- mips_isa = 3;
- if (mips_cpu == -1)
- mips_cpu = 4000;
- }
+ mips_cpu = 4000;
+
else if (strcmp (cpu, "r4400") == 0)
- {
- mips_isa = 3;
- if (mips_cpu == -1)
- mips_cpu = 4400;
- }
+ mips_cpu = 4400;
+
else if (strcmp (cpu, "mips64orion") == 0
|| strcmp (cpu, "r4600") == 0)
- {
- mips_isa = 3;
- if (mips_cpu == -1)
- mips_cpu = 4600;
- }
+ mips_cpu = 4600;
+
else if (strcmp (cpu, "r4650") == 0)
- {
- mips_isa = 3;
- if (mips_cpu == -1)
- mips_cpu = 4650;
- if (mips_4650 == -1)
- mips_4650 = 1;
- }
+ mips_cpu = 4650;
+
else if (strcmp (cpu, "mips64vr4300") == 0)
- {
- mips_isa = 3;
- if (mips_cpu == -1)
- mips_cpu = 4300;
- }
+ mips_cpu = 4300;
+
+ else if (strcmp (cpu, "mips64vr4111") == 0)
+ mips_cpu = 4111;
+
else if (strcmp (cpu, "mips64vr4100") == 0)
- {
- mips_isa = 3;
- if (mips_cpu == -1)
- mips_cpu = 4100;
- if (mips_4100 == -1)
- mips_4100 = 1;
- }
+ mips_cpu = 4100;
+
else if (strcmp (cpu, "r4010") == 0)
- {
- mips_isa = 2;
- if (mips_cpu == -1)
- mips_cpu = 4010;
- if (mips_4010 == -1)
- mips_4010 = 1;
- }
+ mips_cpu = 4010;
+
+
else if (strcmp (cpu, "r5000") == 0
|| strcmp (cpu, "mips64vr5000") == 0)
- {
- mips_isa = 4;
- if (mips_cpu == -1)
- mips_cpu = 5000;
- }
+ mips_cpu = 5000;
+
+
+
else if (strcmp (cpu, "r8000") == 0
|| strcmp (cpu, "mips4") == 0)
- {
- mips_isa = 4;
- if (mips_cpu == -1)
- mips_cpu = 8000;
- }
+ mips_cpu = 8000;
+
else if (strcmp (cpu, "r10000") == 0)
- {
- mips_isa = 4;
- if (mips_cpu == -1)
- mips_cpu = 10000;
- }
+ mips_cpu = 10000;
+
else if (strcmp (cpu, "mips16") == 0)
- {
- mips_isa = 3;
- if (mips_cpu == -1)
- mips_cpu = 0; /* FIXME */
- }
+ mips_cpu = 0; /* FIXME */
+
else
- {
- mips_isa = 1;
- if (mips_cpu == -1)
- mips_cpu = 3000;
- }
+ mips_cpu = 3000;
+ }
+
+ if (mips_cpu == 3000
+ || mips_cpu == 3900)
+ mips_isa_from_cpu = 1;
+
+ else if (mips_cpu == 6000
+ || mips_cpu == 4010)
+ mips_isa_from_cpu = 2;
+
+ else if (mips_cpu == 4000
+ || mips_cpu == 4100
+ || mips_cpu == 4111
+ || mips_cpu == 4400
+ || mips_cpu == 4300
+ || mips_cpu == 4600
+ || mips_cpu == 4650)
+ mips_isa_from_cpu = 3;
+
+ else if (mips_cpu == 5000
+ || mips_cpu == 8000
+ || mips_cpu == 10000)
+ mips_isa_from_cpu = 4;
+
+ else
+ mips_isa_from_cpu = -1;
- if (a != NULL)
- free (a);
+ if (mips_opts.isa == -1)
+ {
+ if (mips_isa_from_cpu != -1)
+ mips_opts.isa = mips_isa_from_cpu;
+ else
+ mips_opts.isa = 1;
}
- if (mips16 < 0)
+ if (mips_opts.mips16 < 0)
{
if (strncmp (TARGET_CPU, "mips16", sizeof "mips16" - 1) == 0)
- mips16 = 1;
+ mips_opts.mips16 = 1;
else
- mips16 = 0;
+ mips_opts.mips16 = 0;
}
- if (mips_4650 < 0)
- mips_4650 = 0;
-
- if (mips_4010 < 0)
- mips_4010 = 0;
+ /* End of TARGET_CPU processing, get rid of malloced memory
+ if necessary. */
+ cpu = NULL;
+ if (a != NULL)
+ {
+ free (a);
+ a = NULL;
+ }
- if (mips_4100 < 0)
- mips_4100 = 0;
+ if (mips_opts.isa == 1 && mips_trap)
+ as_bad (_("trap exception not supported at ISA 1"));
- if (mips_4010 || mips_4100 || mips_cpu == 4300)
- interlocks = 1;
- else
- interlocks = 0;
+ /* Set the EABI kind based on the ISA before the user gets
+ to change the ISA with directives. This isn't really
+ the best, but then neither is basing the abi on the isa. */
+ if (ISA_HAS_64BIT_REGS (mips_opts.isa)
+ && mips_abi_string
+ && 0 == strcmp (mips_abi_string,"eabi"))
+ mips_eabi64 = 1;
- if (mips_cpu == 4300)
- cop_interlocks = 1;
+ if (mips_cpu != 0 && mips_cpu != -1)
+ {
+ ok = bfd_set_arch_mach (stdoutput, bfd_arch_mips, mips_cpu);
+
+ /* If they asked for mips1 or mips2 and a cpu that is
+ mips3 or greater, then mark the object file 32BITMODE. */
+ if (mips_isa_from_cpu != -1
+ && ! ISA_HAS_64BIT_REGS (mips_opts.isa)
+ && ISA_HAS_64BIT_REGS (mips_isa_from_cpu))
+ mips_32bitmode = 1;
+ }
else
- cop_interlocks = 0;
-
- if (mips_isa < 2 && mips_trap)
- as_bad ("trap exception not supported at ISA 1");
-
- switch (mips_isa)
{
- case 1:
- ok = bfd_set_arch_mach (stdoutput, bfd_arch_mips, 3000);
- break;
- case 2:
- ok = bfd_set_arch_mach (stdoutput, bfd_arch_mips, 6000);
- break;
- case 3:
- ok = bfd_set_arch_mach (stdoutput, bfd_arch_mips, 4000);
- break;
- case 4:
- ok = bfd_set_arch_mach (stdoutput, bfd_arch_mips, 8000);
- break;
+ switch (mips_opts.isa)
+ {
+ case 1:
+ ok = bfd_set_arch_mach (stdoutput, bfd_arch_mips, 3000);
+ break;
+ case 2:
+ ok = bfd_set_arch_mach (stdoutput, bfd_arch_mips, 6000);
+ break;
+ case 3:
+ ok = bfd_set_arch_mach (stdoutput, bfd_arch_mips, 4000);
+ break;
+ case 4:
+ ok = bfd_set_arch_mach (stdoutput, bfd_arch_mips, 8000);
+ break;
+ }
}
+
if (! ok)
- as_warn ("Could not set architecture and machine");
+ as_warn (_("Could not set architecture and machine"));
- file_mips_isa = mips_isa;
+ file_mips_isa = mips_opts.isa;
op_hash = hash_new ();
retval = hash_insert (op_hash, name, (PTR) &mips_opcodes[i]);
if (retval != NULL)
{
- fprintf (stderr, "internal error: can't hash `%s': %s\n",
+ fprintf (stderr, _("internal error: can't hash `%s': %s\n"),
mips_opcodes[i].name, retval);
- as_fatal ("Broken assembler. No assembly attempted.");
+ /* Probably a memory allocation problem? Give up now. */
+ as_fatal (_("Broken assembler. No assembly attempted."));
}
do
{
- if (mips_opcodes[i].pinfo != INSN_MACRO
- && ((mips_opcodes[i].match & mips_opcodes[i].mask)
- != mips_opcodes[i].match))
+ if (mips_opcodes[i].pinfo != INSN_MACRO)
{
- fprintf (stderr, "internal error: bad opcode: `%s' \"%s\"\n",
- mips_opcodes[i].name, mips_opcodes[i].args);
- as_fatal ("Broken assembler. No assembly attempted.");
+ if (!validate_mips_insn (&mips_opcodes[i]))
+ broken = 1;
}
++i;
}
retval = hash_insert (mips16_op_hash, name, (PTR) &mips16_opcodes[i]);
if (retval != NULL)
- as_fatal ("internal error: can't hash `%s': %s\n",
+ as_fatal (_("internal: can't hash `%s': %s"),
mips16_opcodes[i].name, retval);
do
{
if (mips16_opcodes[i].pinfo != INSN_MACRO
&& ((mips16_opcodes[i].match & mips16_opcodes[i].mask)
!= mips16_opcodes[i].match))
- as_fatal ("internal error: bad opcode: `%s' \"%s\"\n",
- mips16_opcodes[i].name, mips16_opcodes[i].args);
+ {
+ fprintf (stderr, _("internal error: bad mips16 opcode: %s %s\n"),
+ mips16_opcodes[i].name, mips16_opcodes[i].args);
+ broken = 1;
+ }
++i;
}
while (i < bfd_mips16_num_opcodes
&& strcmp (mips16_opcodes[i].name, name) == 0);
}
- mips_no_prev_insn ();
+ if (broken)
+ as_fatal (_("Broken assembler. No assembly attempted."));
+
+ /* We add all the general register names to the symbol table. This
+ helps us detect invalid uses of them. */
+ for (i = 0; i < 32; i++)
+ {
+ char buf[5];
+
+ sprintf (buf, "$%d", i);
+ symbol_table_insert (symbol_new (buf, reg_section, i,
+ &zero_address_frag));
+ }
+ symbol_table_insert (symbol_new ("$fp", reg_section, FP,
+ &zero_address_frag));
+ symbol_table_insert (symbol_new ("$sp", reg_section, SP,
+ &zero_address_frag));
+ symbol_table_insert (symbol_new ("$gp", reg_section, GP,
+ &zero_address_frag));
+ symbol_table_insert (symbol_new ("$at", reg_section, AT,
+ &zero_address_frag));
+ symbol_table_insert (symbol_new ("$kt0", reg_section, KT0,
+ &zero_address_frag));
+ symbol_table_insert (symbol_new ("$kt1", reg_section, KT1,
+ &zero_address_frag));
+ symbol_table_insert (symbol_new ("$pc", reg_section, -1,
+ &zero_address_frag));
+
+ mips_no_prev_insn (false);
mips_gprmask = 0;
mips_cprmask[0] = 0;
(void) bfd_set_section_alignment (stdoutput, sec, 2);
}
+#ifdef MIPS_STABS_ELF
+ pdr_seg = subseg_new (".pdr", (subsegT) 0);
+ (void) bfd_set_section_flags (stdoutput, pdr_seg,
+ SEC_READONLY | SEC_RELOC | SEC_DEBUGGING);
+ (void) bfd_set_section_alignment (stdoutput, pdr_seg, 2);
+#endif
+
subseg_set (seg, subseg);
}
}
offset_expr.X_op = O_absent;
offset_reloc = BFD_RELOC_UNUSED;
- if (mips16)
+ if (mips_opts.mips16)
mips16_ip (str, &insn);
else
- mips_ip (str, &insn);
+ {
+ mips_ip (str, &insn);
+ DBG((_("returned from mips_ip(%s) insn_opcode = 0x%x\n"),
+ str, insn.insn_opcode));
+ }
if (insn_error)
{
if (insn.insn_mo->pinfo == INSN_MACRO)
{
- if (mips16)
+ if (mips_opts.mips16)
mips16_macro (&insn);
else
macro (&insn);
{
if (class == MIPS16_REG)
{
- assert (mips16);
+ assert (mips_opts.mips16);
reg = mips16_to_32_reg_map[reg];
class = MIPS_GR_REG;
}
if (class == MIPS_FP_REG)
{
- assert (! mips16);
+ assert (! mips_opts.mips16);
/* If we are called with either $f0 or $f1, we must check $f0.
This is not optimal, because it will introduce an unnecessary
NOP between "lwc1 $f0" and "swc1 $f1". To fix this we would
because there is no instruction that sets both $f0 and $f1
and requires a delay. */
if ((ip->insn_mo->pinfo & INSN_READ_FPR_S)
- && (((ip->insn_opcode >> OP_SH_FS) & OP_MASK_FS)
+ && ((((ip->insn_opcode >> OP_SH_FS) & OP_MASK_FS) &~(unsigned)1)
== (reg &~ (unsigned) 1)))
return 1;
if ((ip->insn_mo->pinfo & INSN_READ_FPR_T)
- && (((ip->insn_opcode >> OP_SH_FT) & OP_MASK_FT)
+ && ((((ip->insn_opcode >> OP_SH_FT) & OP_MASK_FT) &~(unsigned)1)
== (reg &~ (unsigned) 1)))
return 1;
}
- else if (! mips16)
+ else if (! mips_opts.mips16)
{
if ((ip->insn_mo->pinfo & INSN_READ_GPR_S)
&& ((ip->insn_opcode >> OP_SH_RS) & OP_MASK_RS) == reg)
else
{
if ((ip->insn_mo->pinfo & MIPS16_INSN_READ_X)
- && ((ip->insn_opcode >> MIPS16OP_SH_RX) & MIPS16OP_MASK_RX) == reg)
+ && (mips16_to_32_reg_map[((ip->insn_opcode >> MIPS16OP_SH_RX)
+ & MIPS16OP_MASK_RX)]
+ == reg))
return 1;
if ((ip->insn_mo->pinfo & MIPS16_INSN_READ_Y)
- && ((ip->insn_opcode >> MIPS16OP_SH_RY) & MIPS16OP_MASK_RY) == reg)
+ && (mips16_to_32_reg_map[((ip->insn_opcode >> MIPS16OP_SH_RY)
+ & MIPS16OP_MASK_RY)]
+ == reg))
return 1;
if ((ip->insn_mo->pinfo & MIPS16_INSN_READ_Z)
- && ((ip->insn_opcode >> MIPS16OP_SH_MOVE32Z)
- & MIPS16OP_MASK_MOVE32Z) == reg)
+ && (mips16_to_32_reg_map[((ip->insn_opcode >> MIPS16OP_SH_MOVE32Z)
+ & MIPS16OP_MASK_MOVE32Z)]
+ == reg))
return 1;
if ((ip->insn_mo->pinfo & MIPS16_INSN_READ_T) && reg == TREG)
return 1;
unsigned long prev_pinfo;
prev_pinfo = prev_insn.insn_mo->pinfo;
- if (! mips_noreorder
- && mips_isa < 4
+ if (! mips_opts.noreorder
+ && ISA_HAS_COPROC_DELAYS (mips_opts.isa)
&& ((prev_pinfo & INSN_LOAD_COPROC_DELAY)
- || (mips_isa < 2
+ || (! gpr_interlocks
&& (prev_pinfo & INSN_LOAD_MEMORY_DELAY))))
{
/* A load from a coprocessor or from memory. All load
delays delay the use of general register rt for one
instruction on the r3000. The r6000 and r4000 use
interlocks. */
+ /* Itbl support may require additional care here. */
know (prev_pinfo & INSN_WRITE_GPR_T);
if (reg == ((prev_insn.insn_opcode >> OP_SH_RT) & OP_MASK_RT))
return 1;
return 0;
}
+/* Mark instruction labels in mips16 mode. This permits the linker to
+ handle them specially, such as generating jalx instructions when
+ needed. We also make them odd for the duration of the assembly, in
+ order to generate the right sort of code. We will make them even
+ in the adjust_symtab routine, while leaving them marked. This is
+ convenient for the debugger and the disassembler. The linker knows
+ to make them odd again. */
+
+static void
+mips16_mark_labels ()
+{
+ if (mips_opts.mips16)
+ {
+ struct insn_label_list *l;
+
+ for (l = insn_labels; l != NULL; l = l->next)
+ {
+#ifdef OBJ_ELF
+ if (OUTPUT_FLAVOR == bfd_target_elf_flavour)
+ S_SET_OTHER (l->label, STO_MIPS16);
+#endif
+ if ((S_GET_VALUE (l->label) & 1) == 0)
+ S_SET_VALUE (l->label, S_GET_VALUE (l->label) + 1);
+ }
+ }
+}
+
/* Output an instruction. PLACE is where to put the instruction; if
it is NULL, this uses frag_more to get room. IP is the instruction
information. ADDRESS_EXPR is an operand of the instruction to be
fixS *fixp;
int nops = 0;
- /* Mark instruction labels in mips16 mode. This permits the linker
- to handle them specially, such as generating jalx instructions
- when needed. We also make them odd for the duration of the
- assembly, in order to generate the right sort of code. We will
- make them even in the adjust_symtab routine, while leaving them
- marked. This is convenient for the debugger and the
- disassembler. The linker knows to make them odd again. */
- if (mips16)
- {
- struct insn_label_list *l;
-
- for (l = insn_labels; l != NULL; l = l->next)
- {
-#ifdef S_SET_OTHER
- if (OUTPUT_FLAVOR == bfd_target_elf_flavour)
- S_SET_OTHER (l->label, STO_MIPS16);
-#endif
- ++l->label->sy_value.X_add_number;
- }
- }
+ /* Mark instruction labels in mips16 mode. */
+ if (mips_opts.mips16)
+ mips16_mark_labels ();
prev_pinfo = prev_insn.insn_mo->pinfo;
pinfo = ip->insn_mo->pinfo;
- if (place == NULL && ! mips_noreorder)
+ if (place == NULL && (! mips_opts.noreorder || prev_nop_frag != NULL))
{
+ int prev_prev_nop;
+
/* If the previous insn required any delay slots, see if we need
to insert a NOP or two. There are eight kinds of possible
hazards, of which an instruction can have at most one type.
/* This is how a NOP is emitted. */
#define emit_nop() \
- (mips16 \
+ (mips_opts.mips16 \
? md_number_to_chars (frag_more (2), 0x6500, 2) \
: md_number_to_chars (frag_more (4), 0, 4))
/* The previous insn might require a delay slot, depending upon
the contents of the current insn. */
- if (! mips16
- && mips_isa < 4
+ if (! mips_opts.mips16
+ && ISA_HAS_COPROC_DELAYS (mips_opts.isa)
&& (((prev_pinfo & INSN_LOAD_COPROC_DELAY)
&& ! cop_interlocks)
- || (mips_isa < 2
+ || (! gpr_interlocks
&& (prev_pinfo & INSN_LOAD_MEMORY_DELAY))))
{
/* A load from a coprocessor or from memory. All load
delays delay the use of general register rt for one
instruction on the r3000. The r6000 and r4000 use
interlocks. */
+ /* Itbl support may require additional care here. */
know (prev_pinfo & INSN_WRITE_GPR_T);
if (mips_optimize == 0
|| insn_uses_reg (ip,
MIPS_GR_REG))
++nops;
}
- else if (! mips16
- && mips_isa < 4
+ else if (! mips_opts.mips16
+ && ISA_HAS_COPROC_DELAYS (mips_opts.isa)
&& (((prev_pinfo & INSN_COPROC_MOVE_DELAY)
&& ! cop_interlocks)
- || (mips_isa < 2
+ || (mips_opts.isa == 1
&& (prev_pinfo & INSN_COPROC_MEMORY_DELAY))))
{
/* A generic coprocessor delay. The previous instruction
knowledge of CP0 handling, and the coprocessors other
than the floating point unit are not distinguished at
all. */
+ /* Itbl support may require additional care here. FIXME!
+ Need to modify this to include knowledge about
+ user specified delays! */
if (prev_pinfo & INSN_WRITE_FPR_T)
{
if (mips_optimize == 0
instruction may set the condition codes, and the
current instruction uses them, we must insert two
NOPS. */
+ /* Itbl support may require additional care here. */
if (mips_optimize == 0
|| ((prev_pinfo & INSN_WRITE_COND_CODE)
&& (pinfo & INSN_READ_COND_CODE)))
++nops;
}
}
- else if (! mips16
- && mips_isa < 4
+ else if (! mips_opts.mips16
+ && ISA_HAS_COPROC_DELAYS (mips_opts.isa)
&& (prev_pinfo & INSN_WRITE_COND_CODE)
&& ! cop_interlocks)
{
(this means it is a floating point comparison
instruction). If this instruction uses the condition
codes, we need to insert a single NOP. */
+ /* Itbl support may require additional care here. */
if (mips_optimize == 0
|| (pinfo & INSN_READ_COND_CODE))
++nops;
}
+
+ /* If we're fixing up mfhi/mflo for the r7000 and the
+ previous insn was an mfhi/mflo and the current insn
+ reads the register that the mfhi/mflo wrote to, then
+ insert two nops. */
+
+ else if (mips_7000_hilo_fix
+ && MF_HILO_INSN (prev_pinfo)
+ && insn_uses_reg (ip, ((prev_insn.insn_opcode >> OP_SH_RD)
+ & OP_MASK_RD),
+ MIPS_GR_REG))
+
+ {
+ nops += 2;
+ }
+
+ /* If we're fixing up mfhi/mflo for the r7000 and the
+ 2nd previous insn was an mfhi/mflo and the current insn
+ reads the register that the mfhi/mflo wrote to, then
+ insert one nop. */
+
+ else if (mips_7000_hilo_fix
+ && MF_HILO_INSN (prev_prev_insn.insn_opcode)
+ && insn_uses_reg (ip, ((prev_prev_insn.insn_opcode >> OP_SH_RD)
+ & OP_MASK_RD),
+ MIPS_GR_REG))
+
+ {
+ nops += 1;
+ }
+
else if (prev_pinfo & INSN_READ_LO)
{
/* The previous instruction reads the LO register; if the
current instruction writes to the LO register, we must
- insert two NOPS. Some newer processors have interlocks. */
- if (! interlocks
+ insert two NOPS. Some newer processors have interlocks.
+ Also the tx39's multiply instructions can be exectuted
+ immediatly after a read from HI/LO (without the delay),
+ though the tx39's divide insns still do require the
+ delay. */
+ if (! (hilo_interlocks
+ || (mips_cpu == 3900 && (pinfo & INSN_MULT)))
&& (mips_optimize == 0
|| (pinfo & INSN_WRITE_LO)))
nops += 2;
+ /* Most mips16 branch insns don't have a delay slot.
+ If a read from LO is immediately followed by a branch
+ to a write to LO we have a read followed by a write
+ less than 2 insns away. We assume the target of
+ a branch might be a write to LO, and insert a nop
+ between a read and an immediately following branch. */
+ else if (mips_opts.mips16
+ && (mips_optimize == 0
+ || (pinfo & MIPS16_INSN_BRANCH)))
+ nops += 1;
}
else if (prev_insn.insn_mo->pinfo & INSN_READ_HI)
{
/* The previous instruction reads the HI register; if the
current instruction writes to the HI register, we must
- insert a NOP. Some newer processors have interlocks. */
- if (! interlocks
+ insert a NOP. Some newer processors have interlocks.
+ Also the note tx39's multiply above. */
+ if (! (hilo_interlocks
+ || (mips_cpu == 3900 && (pinfo & INSN_MULT)))
&& (mips_optimize == 0
|| (pinfo & INSN_WRITE_HI)))
nops += 2;
- }
+ /* Most mips16 branch insns don't have a delay slot.
+ If a read from HI is immediately followed by a branch
+ to a write to HI we have a read followed by a write
+ less than 2 insns away. We assume the target of
+ a branch might be a write to HI, and insert a nop
+ between a read and an immediately following branch. */
+ else if (mips_opts.mips16
+ && (mips_optimize == 0
+ || (pinfo & MIPS16_INSN_BRANCH)))
+ nops += 1;
+ }
+
+ /* If the previous instruction was in a noreorder section, then
+ we don't want to insert the nop after all. */
+ /* Itbl support may require additional care here. */
+ if (prev_insn_unreordered)
+ nops = 0;
/* There are two cases which require two intervening
instructions: 1) setting the condition codes using a move to
which have interlocks). If we are not already emitting a NOP
instruction, we must check for these cases compared to the
instruction previous to the previous instruction. */
- if (nops == 0
- && ((! mips16
- && mips_isa < 4
- && (prev_prev_insn.insn_mo->pinfo & INSN_COPROC_MOVE_DELAY)
- && (prev_prev_insn.insn_mo->pinfo & INSN_WRITE_COND_CODE)
- && (pinfo & INSN_READ_COND_CODE)
- && ! cop_interlocks)
- || ((prev_prev_insn.insn_mo->pinfo & INSN_READ_LO)
- && (pinfo & INSN_WRITE_LO)
- && ! interlocks)
- || ((prev_prev_insn.insn_mo->pinfo & INSN_READ_HI)
- && (pinfo & INSN_WRITE_HI)
- && ! interlocks)))
+ if ((! mips_opts.mips16
+ && ISA_HAS_COPROC_DELAYS (mips_opts.isa)
+ && (prev_prev_insn.insn_mo->pinfo & INSN_COPROC_MOVE_DELAY)
+ && (prev_prev_insn.insn_mo->pinfo & INSN_WRITE_COND_CODE)
+ && (pinfo & INSN_READ_COND_CODE)
+ && ! cop_interlocks)
+ || ((prev_prev_insn.insn_mo->pinfo & INSN_READ_LO)
+ && (pinfo & INSN_WRITE_LO)
+ && ! (hilo_interlocks
+ || (mips_cpu == 3900 && (pinfo & INSN_MULT))))
+ || ((prev_prev_insn.insn_mo->pinfo & INSN_READ_HI)
+ && (pinfo & INSN_WRITE_HI)
+ && ! (hilo_interlocks
+ || (mips_cpu == 3900 && (pinfo & INSN_MULT)))))
+ prev_prev_nop = 1;
+ else
+ prev_prev_nop = 0;
+
+ if (prev_prev_insn_unreordered)
+ prev_prev_nop = 0;
+
+ if (prev_prev_nop && nops == 0)
++nops;
/* If we are being given a nop instruction, don't bother with
one of the nops we would otherwise output. This will only
happen when a nop instruction is used with mips_optimize set
to 0. */
- if (nops > 0 && ip->insn_opcode == (mips16 ? 0x6500 : 0))
+ if (nops > 0
+ && ! mips_opts.noreorder
+ && ip->insn_opcode == (mips_opts.mips16 ? 0x6500 : 0))
--nops;
/* Now emit the right number of NOP instructions. */
- if (nops > 0)
+ if (nops > 0 && ! mips_opts.noreorder)
{
fragS *old_frag;
unsigned long old_frag_offset;
for (l = insn_labels; l != NULL; l = l->next)
{
assert (S_GET_SEGMENT (l->label) == now_seg);
- l->label->sy_frag = frag_now;
+ symbol_set_frag (l->label, frag_now);
S_SET_VALUE (l->label, (valueT) frag_now_fix ());
/* mips16 text labels are stored as odd. */
- if (mips16)
- ++l->label->sy_value.X_add_number;
+ if (mips_opts.mips16)
+ S_SET_VALUE (l->label, S_GET_VALUE (l->label) + 1);
}
#ifndef NO_ECOFF_DEBUGGING
ecoff_fix_loc (old_frag, old_frag_offset);
#endif
}
+ else if (prev_nop_frag != NULL)
+ {
+ /* We have a frag holding nops we may be able to remove. If
+ we don't need any nops, we can decrease the size of
+ prev_nop_frag by the size of one instruction. If we do
+ need some nops, we count them in prev_nops_required. */
+ if (prev_nop_frag_since == 0)
+ {
+ if (nops == 0)
+ {
+ prev_nop_frag->fr_fix -= mips_opts.mips16 ? 2 : 4;
+ --prev_nop_frag_holds;
+ }
+ else
+ prev_nop_frag_required += nops;
+ }
+ else
+ {
+ if (prev_prev_nop == 0)
+ {
+ prev_nop_frag->fr_fix -= mips_opts.mips16 ? 2 : 4;
+ --prev_nop_frag_holds;
+ }
+ else
+ ++prev_nop_frag_required;
+ }
+
+ if (prev_nop_frag_holds <= prev_nop_frag_required)
+ prev_nop_frag = NULL;
+
+ ++prev_nop_frag_since;
+
+ /* Sanity check: by the time we reach the second instruction
+ after prev_nop_frag, we should have used up all the nops
+ one way or another. */
+ assert (prev_nop_frag_since <= 1 || prev_nop_frag == NULL);
+ }
}
-
+
if (reloc_type > BFD_RELOC_UNUSED)
{
/* We need to set up a variant frag. */
- assert (mips16 && address_expr != NULL);
+ assert (mips_opts.mips16 && address_expr != NULL);
f = frag_var (rs_machine_dependent, 4, 0,
RELAX_MIPS16_ENCODE (reloc_type - BFD_RELOC_UNUSED,
mips16_small, mips16_ext,
& INSN_UNCOND_BRANCH_DELAY),
(prev_insn_reloc_type
== BFD_RELOC_MIPS16_JMP)),
- make_expr_symbol (address_expr), (long) 0,
+ make_expr_symbol (address_expr), (offsetT) 0,
(char *) NULL);
}
else if (place != NULL)
f = place;
- else if (mips16 && ! ip->use_extend && reloc_type != BFD_RELOC_MIPS16_JMP)
+ else if (mips_opts.mips16
+ && ! ip->use_extend
+ && reloc_type != BFD_RELOC_MIPS16_JMP)
{
/* Make sure there is enough room to swap this instruction with
a following jump instruction. */
f = frag_more (2);
}
else
- f = frag_more (4);
+ {
+ if (mips_opts.mips16
+ && mips_opts.noreorder
+ && (prev_pinfo & INSN_UNCOND_BRANCH_DELAY) != 0)
+ as_warn (_("extended instruction in delay slot"));
+
+ f = frag_more (4);
+ }
+
fixp = NULL;
if (address_expr != NULL && reloc_type < BFD_RELOC_UNUSED)
{
case BFD_RELOC_MIPS_JMP:
if ((address_expr->X_add_number & 3) != 0)
- as_bad ("jump to misaligned address (0x%lx)",
+ as_bad (_("jump to misaligned address (0x%lx)"),
(unsigned long) address_expr->X_add_number);
ip->insn_opcode |= (address_expr->X_add_number >> 2) & 0x3ffffff;
break;
case BFD_RELOC_MIPS16_JMP:
if ((address_expr->X_add_number & 3) != 0)
- as_bad ("jump to misaligned address (0x%lx)",
+ as_bad (_("jump to misaligned address (0x%lx)"),
(unsigned long) address_expr->X_add_number);
ip->insn_opcode |=
(((address_expr->X_add_number & 0x7c0000) << 3)
| ((address_expr->X_add_number & 0x3fffc) >> 2));
break;
+
case BFD_RELOC_16_PCREL_S2:
goto need_reloc;
}
}
- if (! mips16 || reloc_type == BFD_RELOC_MIPS16_JMP)
+ if (! mips_opts.mips16)
md_number_to_chars (f, ip->insn_opcode, 4);
+ else if (reloc_type == BFD_RELOC_MIPS16_JMP)
+ {
+ md_number_to_chars (f, ip->insn_opcode >> 16, 2);
+ md_number_to_chars (f + 2, ip->insn_opcode & 0xffff, 2);
+ }
else
{
if (ip->use_extend)
}
/* Update the register mask information. */
- if (! mips16)
+ if (! mips_opts.mips16)
{
if (pinfo & INSN_WRITE_GPR_D)
mips_gprmask |= 1 << ((ip->insn_opcode >> OP_SH_RD) & OP_MASK_RD);
mips_cprmask[1] |= 1 << ((ip->insn_opcode >> OP_SH_FR) & OP_MASK_FR);
if (pinfo & INSN_COP)
{
- /* We don't keep enough information to sort these cases out. */
+ /* We don't keep enough information to sort these cases out.
+ The itbl support does keep this information however, although
+ we currently don't support itbl fprmats as part of the cop
+ instruction. May want to add this support in the future. */
}
/* Never set the bit for $0, which is always zero. */
mips_gprmask &=~ 1 << 0;
& MIPS16OP_MASK_REGR32);
}
- if (place == NULL && ! mips_noreorder)
+ if (place == NULL && ! mips_opts.noreorder)
{
/* Filling the branch delay slot is more complex. We try to
switch the branch with the previous instruction, which we can
if (mips_optimize < 2
/* If we have seen .set volatile or .set nomove, don't
optimize. */
- || mips_nomove != 0
+ || mips_opts.nomove != 0
/* If we had to emit any NOP instructions, then we
already know we can not swap. */
|| nops != 0
can not do the swap. This does not apply to the
mips16, which uses variant frags for different
purposes. */
- || (! mips16
+ || (! mips_opts.mips16
&& prev_insn_frag->fr_type == rs_machine_dependent)
/* If the branch reads the condition codes, we don't
even try to swap, because in the sequence
bc1t LABEL
we can not swap, and I don't feel like handling that
case. */
- || (! mips16
- && mips_isa < 4
+ || (! mips_opts.mips16
+ && ISA_HAS_COPROC_DELAYS (mips_opts.isa)
&& (pinfo & INSN_READ_COND_CODE))
/* We can not swap with an instruction that requires a
delay slot, becase the target of the branch might
interfere with that instruction. */
- || (! mips16
- && mips_isa < 4
+ || (! mips_opts.mips16
+ && ISA_HAS_COPROC_DELAYS (mips_opts.isa)
&& (prev_pinfo
+ /* Itbl support may require additional care here. */
& (INSN_LOAD_COPROC_DELAY
| INSN_COPROC_MOVE_DELAY
| INSN_WRITE_COND_CODE)))
- || (! interlocks
+ || (! (hilo_interlocks
+ || (mips_cpu == 3900 && (pinfo & INSN_MULT)))
&& (prev_pinfo
& (INSN_READ_LO
| INSN_READ_HI)))
- || (! mips16
- && mips_isa < 2
- && (prev_pinfo
- & (INSN_LOAD_MEMORY_DELAY
- | INSN_COPROC_MEMORY_DELAY)))
+ || (! mips_opts.mips16
+ && ! gpr_interlocks
+ && (prev_pinfo & INSN_LOAD_MEMORY_DELAY))
+ || (! mips_opts.mips16
+ && mips_opts.isa == 1
+ /* Itbl support may require additional care here. */
+ && (prev_pinfo & INSN_COPROC_MEMORY_DELAY))
/* We can not swap with a branch instruction. */
|| (prev_pinfo
& (INSN_UNCOND_BRANCH_DELAY
|| (prev_pinfo & INSN_TRAP)
/* If the branch reads a register that the previous
instruction sets, we can not swap. */
- || (! mips16
+ || (! mips_opts.mips16
&& (prev_pinfo & INSN_WRITE_GPR_T)
&& insn_uses_reg (ip,
((prev_insn.insn_opcode >> OP_SH_RT)
& OP_MASK_RT),
MIPS_GR_REG))
- || (! mips16
+ || (! mips_opts.mips16
&& (prev_pinfo & INSN_WRITE_GPR_D)
&& insn_uses_reg (ip,
((prev_insn.insn_opcode >> OP_SH_RD)
& OP_MASK_RD),
MIPS_GR_REG))
- || (mips16
+ || (mips_opts.mips16
&& (((prev_pinfo & MIPS16_INSN_WRITE_X)
&& insn_uses_reg (ip,
((prev_insn.insn_opcode
/* If the branch writes a register that the previous
instruction sets, we can not swap (we know that
branches write only to RD or to $31). */
- || (! mips16
+ || (! mips_opts.mips16
&& (prev_pinfo & INSN_WRITE_GPR_T)
&& (((pinfo & INSN_WRITE_GPR_D)
&& (((prev_insn.insn_opcode >> OP_SH_RT) & OP_MASK_RT)
&& (((prev_insn.insn_opcode >> OP_SH_RT)
& OP_MASK_RT)
== 31))))
- || (! mips16
+ || (! mips_opts.mips16
&& (prev_pinfo & INSN_WRITE_GPR_D)
&& (((pinfo & INSN_WRITE_GPR_D)
&& (((prev_insn.insn_opcode >> OP_SH_RD) & OP_MASK_RD)
&& (((prev_insn.insn_opcode >> OP_SH_RD)
& OP_MASK_RD)
== 31))))
- || (mips16
+ || (mips_opts.mips16
&& (pinfo & MIPS16_INSN_WRITE_31)
&& ((prev_pinfo & MIPS16_INSN_WRITE_31)
|| ((prev_pinfo & MIPS16_INSN_WRITE_GPR_Y)
/* If the branch writes a register that the previous
instruction reads, we can not swap (we know that
branches only write to RD or to $31). */
- || (! mips16
+ || (! mips_opts.mips16
&& (pinfo & INSN_WRITE_GPR_D)
&& insn_uses_reg (&prev_insn,
((ip->insn_opcode >> OP_SH_RD)
& OP_MASK_RD),
MIPS_GR_REG))
- || (! mips16
+ || (! mips_opts.mips16
&& (pinfo & INSN_WRITE_GPR_31)
&& insn_uses_reg (&prev_insn, 31, MIPS_GR_REG))
- || (mips16
+ || (mips_opts.mips16
&& (pinfo & MIPS16_INSN_WRITE_31)
&& insn_uses_reg (&prev_insn, RA, MIPS_GR_REG))
/* If we are generating embedded PIC code, the branch
/* If the previous previous instruction has a load
delay, and sets a register that the branch reads, we
can not swap. */
- || (! mips16
- && mips_isa < 4
+ || (! mips_opts.mips16
+ && ISA_HAS_COPROC_DELAYS (mips_opts.isa)
+ /* Itbl support may require additional care here. */
&& ((prev_prev_insn.insn_mo->pinfo & INSN_LOAD_COPROC_DELAY)
- || (mips_isa < 2
+ || (! gpr_interlocks
&& (prev_prev_insn.insn_mo->pinfo
& INSN_LOAD_MEMORY_DELAY)))
&& insn_uses_reg (ip,
&& (prev_pinfo & INSN_READ_COND_CODE))
/* If the previous instruction uses the PC, we can not
swap. */
- || (mips16
+ || (mips_opts.mips16
&& (prev_pinfo & MIPS16_INSN_READ_PC))
/* If the previous instruction was extended, we can not
swap. */
- || (mips16 && prev_insn_extended)
+ || (mips_opts.mips16 && prev_insn_extended)
/* If the previous instruction had a fixup in mips16
mode, we can not swap. This normally means that the
previous instruction was a 4 byte branch anyhow. */
- || (mips16 && prev_insn_fixp))
+ || (mips_opts.mips16 && prev_insn_fixp)
+ /* If the previous instruction is a sync, sync.l, or
+ sync.p, we can not swap. */
+ || (prev_pinfo & INSN_SYNC))
{
/* We could do even better for unconditional branches to
portions of this object file; we could pick up the
else
{
/* It looks like we can actually do the swap. */
- if (! mips16)
+ if (! mips_opts.mips16)
{
char *prev_f;
char temp[4];
fixp->fx_where = prev_insn_where;
}
}
- else if (reloc_type > BFD_RELOC_UNUSED)
- {
- char *prev_f;
- char temp[2];
-
- /* We are in mips16 mode, and we have just created a
- variant frag. We need to extract the old
- instruction from the end of the previous frag,
- and add it to a new frag. */
- prev_f = prev_insn_frag->fr_literal + prev_insn_where;
- memcpy (temp, prev_f, 2);
- prev_insn_frag->fr_fix -= 2;
- if (prev_insn_frag->fr_type == rs_machine_dependent)
- {
- assert (prev_insn_where == prev_insn_frag->fr_fix);
- memcpy (prev_f, prev_f + 2, 2);
- }
- memcpy (frag_more (2), temp, 2);
- }
else
{
char *prev_f;
memcpy (temp, prev_f, 2);
memcpy (prev_f, f, 2);
if (reloc_type != BFD_RELOC_MIPS16_JMP)
- memcpy (f, temp, 2);
+ {
+ assert (reloc_type == BFD_RELOC_UNUSED);
+ memcpy (f, temp, 2);
+ }
else
{
memcpy (f, f + 2, 2);
prev_insn_fixp = fixp;
prev_insn_reloc_type = reloc_type;
- if (mips16)
+ if (mips_opts.mips16)
prev_insn_extended = (ip->use_extend
|| reloc_type > BFD_RELOC_UNUSED);
}
/* We need to record a bit of information even when we are not
reordering, in order to determine the base address for mips16
PC relative relocs. */
+ prev_prev_insn = prev_insn;
prev_insn = *ip;
prev_insn_reloc_type = reloc_type;
+ prev_prev_insn_unreordered = prev_insn_unreordered;
+ prev_insn_unreordered = 1;
}
/* We just output an insn, so the next one doesn't have a label. */
mips_clear_insn_labels ();
+
+ /* We must ensure that a fixup associated with an unmatched %hi
+ reloc does not become a variant frag. Otherwise, the
+ rearrangement of %hi relocs in frob_file may confuse
+ tc_gen_reloc. */
+ if (unmatched_hi)
+ {
+ frag_wane (frag_now);
+ frag_new (0);
+ }
}
/* This function forgets that there was any previous instruction or
- label. */
+ label. If PRESERVE is non-zero, it remembers enough information to
+ know whether nops are needed before a noreorder section. */
static void
-mips_no_prev_insn ()
+mips_no_prev_insn (preserve)
+ int preserve;
{
- prev_insn.insn_mo = &dummy_opcode;
- prev_prev_insn.insn_mo = &dummy_opcode;
+ if (! preserve)
+ {
+ prev_insn.insn_mo = &dummy_opcode;
+ prev_prev_insn.insn_mo = &dummy_opcode;
+ prev_nop_frag = NULL;
+ prev_nop_frag_holds = 0;
+ prev_nop_frag_required = 0;
+ prev_nop_frag_since = 0;
+ }
prev_insn_valid = 0;
prev_insn_is_delay_slot = 0;
prev_insn_unreordered = 0;
mips_emit_delays (insns)
boolean insns;
{
- if (! mips_noreorder)
+ if (! mips_opts.noreorder)
{
- int nop;
+ int nops;
- nop = 0;
- if ((! mips16
- && mips_isa < 4
+ nops = 0;
+ if ((! mips_opts.mips16
+ && ISA_HAS_COPROC_DELAYS (mips_opts.isa)
&& (! cop_interlocks
&& (prev_insn.insn_mo->pinfo
& (INSN_LOAD_COPROC_DELAY
| INSN_COPROC_MOVE_DELAY
| INSN_WRITE_COND_CODE))))
- || (! interlocks
+ || (! hilo_interlocks
&& (prev_insn.insn_mo->pinfo
& (INSN_READ_LO
| INSN_READ_HI)))
- || (! mips16
- && mips_isa < 2
+ || (! mips_opts.mips16
+ && ! gpr_interlocks
+ && (prev_insn.insn_mo->pinfo
+ & INSN_LOAD_MEMORY_DELAY))
+ || (! mips_opts.mips16
+ && mips_opts.isa == 1
&& (prev_insn.insn_mo->pinfo
- & (INSN_LOAD_MEMORY_DELAY
- | INSN_COPROC_MEMORY_DELAY))))
+ & INSN_COPROC_MEMORY_DELAY)))
{
- nop = 1;
- if ((! mips16
- && mips_isa < 4
+ /* Itbl support may require additional care here. */
+ ++nops;
+ if ((! mips_opts.mips16
+ && ISA_HAS_COPROC_DELAYS (mips_opts.isa)
&& (! cop_interlocks
&& prev_insn.insn_mo->pinfo & INSN_WRITE_COND_CODE))
- || (! interlocks
+ || (! hilo_interlocks
&& ((prev_insn.insn_mo->pinfo & INSN_READ_HI)
|| (prev_insn.insn_mo->pinfo & INSN_READ_LO))))
- emit_nop ();
+ ++nops;
+
+ if (prev_insn_unreordered)
+ nops = 0;
}
- else if ((! mips16
- && mips_isa < 4
+ else if ((! mips_opts.mips16
+ && ISA_HAS_COPROC_DELAYS (mips_opts.isa)
&& (! cop_interlocks
&& prev_prev_insn.insn_mo->pinfo & INSN_WRITE_COND_CODE))
- || (! interlocks
+ || (! hilo_interlocks
&& ((prev_prev_insn.insn_mo->pinfo & INSN_READ_HI)
|| (prev_prev_insn.insn_mo->pinfo & INSN_READ_LO))))
- nop = 1;
- if (nop)
+ {
+ /* Itbl support may require additional care here. */
+ if (! prev_prev_insn_unreordered)
+ ++nops;
+ }
+
+ if (nops > 0)
{
struct insn_label_list *l;
- emit_nop ();
+ if (insns)
+ {
+ /* Record the frag which holds the nop instructions, so
+ that we can remove them if we don't need them. */
+ frag_grow (mips_opts.mips16 ? nops * 2 : nops * 4);
+ prev_nop_frag = frag_now;
+ prev_nop_frag_holds = nops;
+ prev_nop_frag_required = 0;
+ prev_nop_frag_since = 0;
+ }
+
+ for (; nops > 0; --nops)
+ emit_nop ();
+
+ if (insns)
+ {
+ /* Move on to a new frag, so that it is safe to simply
+ decrease the size of prev_nop_frag. */
+ frag_wane (frag_now);
+ frag_new (0);
+ }
+
for (l = insn_labels; l != NULL; l = l->next)
{
assert (S_GET_SEGMENT (l->label) == now_seg);
- l->label->sy_frag = frag_now;
+ symbol_set_frag (l->label, frag_now);
S_SET_VALUE (l->label, (valueT) frag_now_fix ());
/* mips16 text labels are stored as odd. */
- if (mips16)
- ++l->label->sy_value.X_add_number;
+ if (mips_opts.mips16)
+ S_SET_VALUE (l->label, S_GET_VALUE (l->label) + 1);
}
}
}
- /* Mark instruction labels in mips16 mode. This permits the linker
- to handle them specially, such as generating jalx instructions
- when needed. We also make them odd for the duration of the
- assembly, in order to generate the right sort of code. We will
- make them even in the adjust_symtab routine, while leaving them
- marked. This is convenient for the debugger and the
- disassembler. The linker knows to make them odd again. */
- if (mips16 && insns)
- {
- struct insn_label_list *l;
+ /* Mark instruction labels in mips16 mode. */
+ if (mips_opts.mips16 && insns)
+ mips16_mark_labels ();
- for (l = insn_labels; l != NULL; l = l->next)
- {
-#ifdef S_SET_OTHER
- if (OUTPUT_FLAVOR == bfd_target_elf_flavour)
- S_SET_OTHER (l->label, STO_MIPS16);
-#endif
- if ((l->label->sy_value.X_add_number & 1) == 0)
- ++l->label->sy_value.X_add_number;
- }
- }
-
- mips_no_prev_insn ();
+ mips_no_prev_insn (insns);
}
/* Build an instruction created by a macro expansion. This is passed
* print a warning if needed. We need to pass ip as a parameter
* to generate a better warning message here...
*/
- if (mips_warn_about_macros && place == NULL && *counter == 1)
- as_warn ("Macro instruction expanded into multiple instructions");
+ if (mips_opts.warn_about_macros && place == NULL && *counter == 1)
+ as_warn (_("Macro instruction expanded into multiple instructions"));
if (place == NULL)
*counter += 1; /* bump instruction counter */
- if (mips16)
+ if (mips_opts.mips16)
{
mips16_macro_build (place, counter, ep, name, fmt, args);
va_end (args);
assert (insn.insn_mo);
assert (strcmp (name, insn.insn_mo->name) == 0);
- while (strcmp (fmt, insn.insn_mo->args) != 0
- || insn.insn_mo->pinfo == INSN_MACRO
- || ((insn.insn_mo->pinfo & INSN_ISA) == INSN_ISA2
- && mips_isa < 2)
- || ((insn.insn_mo->pinfo & INSN_ISA) == INSN_ISA3
- && mips_isa < 3)
- || ((insn.insn_mo->pinfo & INSN_ISA) == INSN_ISA4
- && mips_isa < 4)
- || ((insn.insn_mo->pinfo & INSN_ISA) == INSN_4650
- && ! mips_4650)
- || ((insn.insn_mo->pinfo & INSN_ISA) == INSN_4010
- && ! mips_4010)
- || ((insn.insn_mo->pinfo & INSN_ISA) == INSN_4100
- && ! mips_4100))
+ /* Search until we get a match for NAME. */
+ while (1)
{
+ if (strcmp (fmt, insn.insn_mo->args) == 0
+ && insn.insn_mo->pinfo != INSN_MACRO
+ && OPCODE_IS_MEMBER (insn.insn_mo, mips_opts.isa, mips_cpu,
+ mips_gp32)
+ && (mips_cpu != 4650 || (insn.insn_mo->pinfo & FP_D) == 0))
+ break;
+
++insn.insn_mo;
assert (insn.insn_mo->name);
assert (strcmp (name, insn.insn_mo->name) == 0);
}
+
insn.insn_opcode = insn.insn_mo->match;
for (;;)
{
insn.insn_opcode |= va_arg (args, int) << 6;
continue;
+ case 'q':
+ insn.insn_opcode |= va_arg (args, int) << 6;
+ continue;
+
case 'b':
case 's':
case 'r':
|| r == BFD_RELOC_MIPS_GOT_LO16
|| r == BFD_RELOC_MIPS_CALL_LO16
|| (ep->X_op == O_subtract
- && now_seg == text_section
&& r == BFD_RELOC_PCREL_LO16));
continue;
|| r == BFD_RELOC_MIPS_GOT_HI16
|| r == BFD_RELOC_MIPS_CALL_HI16))
|| (ep->X_op == O_subtract
- && now_seg == text_section
&& r == BFD_RELOC_PCREL_HI16_S)));
if (ep->X_op == O_constant)
{
r = BFD_RELOC_MIPS_JMP;
continue;
+ case 'C':
+ insn.insn_opcode |= va_arg (args, unsigned long);
+ continue;
+
default:
internalError ();
}
static void
mips16_macro_build (place, counter, ep, name, fmt, args)
char *place;
- int *counter;
+ int *counter ATTRIBUTE_UNUSED;
expressionS *ep;
const char *name;
const char *fmt;
CONST char *name = "lui";
CONST char *fmt = "t,u";
- assert (! mips16);
+ assert (! mips_opts.mips16);
if (place == NULL)
high_expr = *ep;
* print a warning if needed. We need to pass ip as a parameter
* to generate a better warning message here...
*/
- if (mips_warn_about_macros && place == NULL && *counter == 1)
- as_warn ("Macro instruction expanded into multiple instructions");
+ if (mips_opts.warn_about_macros && place == NULL && *counter == 1)
+ as_warn (_("Macro instruction expanded into multiple instructions"));
if (place == NULL)
*counter += 1; /* bump instruction counter */
int reg;
int unsignedp;
{
- if (imm_expr.X_add_number >= -0x8000 && imm_expr.X_add_number < 0x8000)
+ if (imm_expr.X_op == O_constant
+ && imm_expr.X_add_number >= -0x8000
+ && imm_expr.X_add_number < 0x8000)
macro_build ((char *) NULL, counter, &imm_expr,
unsignedp ? "sltiu" : "slti",
"t,r,j", AT, reg, (int) BFD_RELOC_LO16);
struct mips_cl_insn *ip;
expressionS *ex;
{
- if (ex->X_op != O_constant)
- as_warn ("Instruction %s requires absolute expression", ip->insn_mo->name);
+ if (ex->X_op == O_big)
+ as_bad (_("unsupported large constant"));
+ else if (ex->X_op != O_constant)
+ as_bad (_("Instruction %s requires absolute expression"), ip->insn_mo->name);
}
/* Count the leading zeroes by performing a binary chop. This is a
|| ! ep->X_unsigned
|| sizeof (ep->X_add_number) > 4
|| (ep->X_add_number & 0x80000000) == 0))
- || ((mips_isa < 3 || !dbl)
- && (ep->X_add_number &~ (offsetT) 0xffffffff) == 0))
+ || ((! ISA_HAS_64BIT_REGS (mips_opts.isa) || ! dbl)
+ && (ep->X_add_number &~ (offsetT) 0xffffffff) == 0)
+ || (! ISA_HAS_64BIT_REGS (mips_opts.isa)
+ && ! dbl
+ && ((ep->X_add_number &~ (offsetT) 0xffffffff)
+ == ~ (offsetT) 0xffffffff)))
{
/* 32 bit values require an lui. */
macro_build ((char *) NULL, counter, ep, "lui", "t,u", reg,
/* The value is larger than 32 bits. */
- if (mips_isa < 3)
+ if (! ISA_HAS_64BIT_REGS (mips_opts.isa))
{
- as_bad ("Number larger than 32 bits");
+ as_bad (_("Number larger than 32 bits"));
macro_build ((char *) NULL, counter, ep, "addiu", "t,r,j", reg, 0,
(int) BFD_RELOC_LO16);
return;
if (ep->X_add_number == 3)
generic_bignum[3] = 0;
else if (ep->X_add_number > 4)
- as_bad ("Number larger than 64 bits");
+ as_bad (_("Number larger than 64 bits"));
lo32.X_op = O_constant;
lo32.X_add_number = generic_bignum[0] + (generic_bignum[1] << 16);
hi32.X_op = O_constant;
if (ep->X_op != O_constant
&& ep->X_op != O_symbol)
{
- as_bad ("expression too complex");
+ as_bad (_("expression too complex"));
ep->X_op = O_constant;
}
addiu $reg,$reg,<sym> (BFD_RELOC_LO16)
If we have an addend, we always use the latter form. */
if ((valueT) ep->X_add_number >= MAX_GPREL_OFFSET
- || nopic_need_relax (ep->X_add_symbol))
+ || nopic_need_relax (ep->X_add_symbol, 1))
p = NULL;
else
{
frag_grow (20);
macro_build ((char *) NULL, counter, ep,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", reg, GP, (int) BFD_RELOC_MIPS_GPREL);
p = frag_var (rs_machine_dependent, 8, 0,
- RELAX_ENCODE (4, 8, 0, 4, 0, mips_warn_about_macros),
- ep->X_add_symbol, (long) 0, (char *) NULL);
+ RELAX_ENCODE (4, 8, 0, 4, 0,
+ mips_opts.warn_about_macros),
+ ep->X_add_symbol, (offsetT) 0, (char *) NULL);
}
macro_build_lui (p, counter, ep, reg);
if (p != NULL)
p += 4;
macro_build (p, counter, ep,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", reg, reg, (int) BFD_RELOC_LO16);
}
else if (mips_pic == SVR4_PIC && ! mips_big_got)
ep->X_add_number = 0;
frag_grow (20);
macro_build ((char *) NULL, counter, ep,
- mips_isa < 3 ? "lw" : "ld",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "lw" : "ld"),
"t,o(b)", reg, (int) BFD_RELOC_MIPS_GOT16, GP);
macro_build ((char *) NULL, counter, (expressionS *) NULL, "nop", "");
p = frag_var (rs_machine_dependent, 4, 0,
- RELAX_ENCODE (0, 4, -8, 0, 0, mips_warn_about_macros),
- ep->X_add_symbol, (long) 0, (char *) NULL);
+ RELAX_ENCODE (0, 4, -8, 0, 0, mips_opts.warn_about_macros),
+ ep->X_add_symbol, (offsetT) 0, (char *) NULL);
macro_build (p, counter, ep,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", reg, reg, (int) BFD_RELOC_LO16);
if (ex.X_add_number != 0)
{
if (ex.X_add_number < -0x8000 || ex.X_add_number >= 0x8000)
- as_bad ("PIC code offset overflow (max 16 signed bits)");
+ as_bad (_("PIC code offset overflow (max 16 signed bits)"));
ex.X_op = O_constant;
macro_build ((char *) NULL, counter, &ex,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", reg, reg, (int) BFD_RELOC_LO16);
}
}
macro_build ((char *) NULL, counter, ep, "lui", "t,u", reg,
(int) BFD_RELOC_MIPS_GOT_HI16);
macro_build ((char *) NULL, counter, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", reg, reg, GP);
macro_build ((char *) NULL, counter, ep,
- mips_isa < 3 ? "lw" : "ld",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "lw" : "ld"),
"t,o(b)", reg, (int) BFD_RELOC_MIPS_GOT_LO16, reg);
p = frag_var (rs_machine_dependent, 12 + off, 0,
RELAX_ENCODE (12, 12 + off, off, 8 + off, 0,
- mips_warn_about_macros),
- ep->X_add_symbol, (long) 0, (char *) NULL);
+ mips_opts.warn_about_macros),
+ ep->X_add_symbol, (offsetT) 0, (char *) NULL);
if (off > 0)
{
/* We need a nop before loading from $gp. This special
p += 4;
}
macro_build (p, counter, ep,
- mips_isa < 3 ? "lw" : "ld",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "lw" : "ld"),
"t,o(b)", reg, (int) BFD_RELOC_MIPS_GOT16, GP);
p += 4;
macro_build (p, counter, (expressionS *) NULL, "nop", "");
p += 4;
macro_build (p, counter, ep,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", reg, reg, (int) BFD_RELOC_LO16);
if (ex.X_add_number != 0)
{
if (ex.X_add_number < -0x8000 || ex.X_add_number >= 0x8000)
- as_bad ("PIC code offset overflow (max 16 signed bits)");
+ as_bad (_("PIC code offset overflow (max 16 signed bits)"));
ex.X_op = O_constant;
macro_build ((char *) NULL, counter, &ex,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", reg, reg, (int) BFD_RELOC_LO16);
}
}
addiu $reg,$gp,<sym> (BFD_RELOC_MIPS_GPREL)
*/
macro_build ((char *) NULL, counter, ep,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", reg, GP, (int) BFD_RELOC_MIPS_GPREL);
}
else
int tempreg;
int mask;
int icnt = 0;
- int used_at;
+ int used_at = 0;
expressionS expr1;
const char *s;
const char *s2;
int dbl = 0;
int coproc = 0;
int lr = 0;
+ int imm = 0;
offsetT maxnum;
int off;
bfd_reloc_code_real_type r;
char *p;
int hold_mips_optimize;
- assert (! mips16);
+ assert (! mips_opts.mips16);
treg = (ip->insn_opcode >> 16) & 0x1f;
dreg = (ip->insn_opcode >> 11) & 0x1f;
*/
mips_emit_delays (true);
- ++mips_noreorder;
+ ++mips_opts.noreorder;
mips_any_noreorder = 1;
expr1.X_add_number = 8;
dbl ? "dsub" : "sub",
"d,v,t", dreg, 0, sreg);
- --mips_noreorder;
+ --mips_opts.noreorder;
return;
case M_ADD_I:
s = "daddiu";
s2 = "daddu";
do_addi:
- if (imm_expr.X_add_number >= -0x8000 && imm_expr.X_add_number < 0x8000)
+ if (imm_expr.X_op == O_constant
+ && imm_expr.X_add_number >= -0x8000
+ && imm_expr.X_add_number < 0x8000)
{
macro_build ((char *) NULL, &icnt, &imm_expr, s, "t,r,j", treg, sreg,
(int) BFD_RELOC_LO16);
s = "xori";
s2 = "xor";
do_bit:
- if (imm_expr.X_add_number >= 0 && imm_expr.X_add_number < 0x10000)
+ if (imm_expr.X_op == O_constant
+ && imm_expr.X_add_number >= 0
+ && imm_expr.X_add_number < 0x10000)
{
if (mask != M_NOR_I)
macro_build ((char *) NULL, &icnt, &imm_expr, s, "t,r,i", treg,
s = "bnel";
likely = 1;
beq_i:
- if (imm_expr.X_add_number == 0)
+ if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
{
macro_build ((char *) NULL, &icnt, &offset_expr, s, "s,t,p", sreg,
0);
case M_BGT_I:
/* check for > max integer */
maxnum = 0x7fffffff;
- if (mips_isa >= 3)
+ if (ISA_HAS_64BIT_REGS (mips_opts.isa) && sizeof (maxnum) > 4)
{
maxnum <<= 16;
maxnum |= 0xffff;
maxnum <<= 16;
maxnum |= 0xffff;
}
- if (imm_expr.X_add_number >= maxnum
- && (mips_isa < 3 || sizeof (maxnum) > 4))
+ if (imm_expr.X_op == O_constant
+ && imm_expr.X_add_number >= maxnum
+ && (! ISA_HAS_64BIT_REGS (mips_opts.isa) || sizeof (maxnum) > 4))
{
do_false:
/* result is always false */
if (! likely)
{
- as_warn ("Branch %s is always false (nop)", ip->insn_mo->name);
+ as_warn (_("Branch %s is always false (nop)"), ip->insn_mo->name);
macro_build ((char *) NULL, &icnt, NULL, "nop", "", 0);
}
else
{
- as_warn ("Branch likely %s is always false", ip->insn_mo->name);
+ as_warn (_("Branch likely %s is always false"), ip->insn_mo->name);
macro_build ((char *) NULL, &icnt, &offset_expr, "bnel",
"s,t,p", 0, 0);
}
return;
}
+ if (imm_expr.X_op != O_constant)
+ as_bad (_("Unsupported large constant"));
imm_expr.X_add_number++;
/* FALLTHROUGH */
case M_BGE_I:
case M_BGEL_I:
if (mask == M_BGEL_I)
likely = 1;
- if (imm_expr.X_add_number == 0)
+ if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
{
macro_build ((char *) NULL, &icnt, &offset_expr,
likely ? "bgezl" : "bgez",
"s,p", sreg);
return;
}
- if (imm_expr.X_add_number == 1)
+ if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 1)
{
macro_build ((char *) NULL, &icnt, &offset_expr,
likely ? "bgtzl" : "bgtz",
return;
}
maxnum = 0x7fffffff;
- if (mips_isa >= 3)
+ if (ISA_HAS_64BIT_REGS (mips_opts.isa) && sizeof (maxnum) > 4)
{
maxnum <<= 16;
maxnum |= 0xffff;
maxnum |= 0xffff;
}
maxnum = - maxnum - 1;
- if (imm_expr.X_add_number <= maxnum
- && (mips_isa < 3 || sizeof (maxnum) > 4))
+ if (imm_expr.X_op == O_constant
+ && imm_expr.X_add_number <= maxnum
+ && (! ISA_HAS_64BIT_REGS (mips_opts.isa) || sizeof (maxnum) > 4))
{
do_true:
/* result is always true */
- as_warn ("Branch %s is always true", ip->insn_mo->name);
+ as_warn (_("Branch %s is always true"), ip->insn_mo->name);
macro_build ((char *) NULL, &icnt, &offset_expr, "b", "p");
return;
}
case M_BGTUL_I:
likely = 1;
case M_BGTU_I:
- if (sreg == 0 || imm_expr.X_add_number == -1)
+ if (sreg == 0
+ || (! ISA_HAS_64BIT_REGS (mips_opts.isa)
+ && imm_expr.X_op == O_constant
+ && imm_expr.X_add_number == 0xffffffff))
goto do_false;
+ if (imm_expr.X_op != O_constant)
+ as_bad (_("Unsupported large constant"));
imm_expr.X_add_number++;
/* FALLTHROUGH */
case M_BGEU_I:
case M_BGEUL_I:
if (mask == M_BGEUL_I)
likely = 1;
- if (imm_expr.X_add_number == 0)
+ if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
goto do_true;
- if (imm_expr.X_add_number == 1)
+ if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 1)
{
macro_build ((char *) NULL, &icnt, &offset_expr,
likely ? "bnel" : "bne",
likely = 1;
case M_BLE_I:
maxnum = 0x7fffffff;
- if (mips_isa >= 3)
+ if (ISA_HAS_64BIT_REGS (mips_opts.isa) && sizeof (maxnum) > 4)
{
maxnum <<= 16;
maxnum |= 0xffff;
maxnum <<= 16;
maxnum |= 0xffff;
}
- if (imm_expr.X_add_number >= maxnum
- && (mips_isa < 3 || sizeof (maxnum) > 4))
+ if (imm_expr.X_op == O_constant
+ && imm_expr.X_add_number >= maxnum
+ && (! ISA_HAS_64BIT_REGS (mips_opts.isa) || sizeof (maxnum) > 4))
goto do_true;
+ if (imm_expr.X_op != O_constant)
+ as_bad (_("Unsupported large constant"));
imm_expr.X_add_number++;
/* FALLTHROUGH */
case M_BLT_I:
case M_BLTL_I:
if (mask == M_BLTL_I)
likely = 1;
- if (imm_expr.X_add_number == 0)
+ if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
{
macro_build ((char *) NULL, &icnt, &offset_expr,
likely ? "bltzl" : "bltz",
"s,p", sreg);
return;
}
- if (imm_expr.X_add_number == 1)
+ if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 1)
{
macro_build ((char *) NULL, &icnt, &offset_expr,
likely ? "blezl" : "blez",
case M_BLEUL_I:
likely = 1;
case M_BLEU_I:
- if (sreg == 0 || imm_expr.X_add_number == -1)
+ if (sreg == 0
+ || (! ISA_HAS_64BIT_REGS (mips_opts.isa)
+ && imm_expr.X_op == O_constant
+ && imm_expr.X_add_number == 0xffffffff))
goto do_true;
+ if (imm_expr.X_op != O_constant)
+ as_bad (_("Unsupported large constant"));
imm_expr.X_add_number++;
/* FALLTHROUGH */
case M_BLTU_I:
case M_BLTUL_I:
if (mask == M_BLTUL_I)
likely = 1;
- if (imm_expr.X_add_number == 0)
+ if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
goto do_false;
- if (imm_expr.X_add_number == 1)
+ if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 1)
{
macro_build ((char *) NULL, &icnt, &offset_expr,
likely ? "beql" : "beq",
do_div3:
if (treg == 0)
{
- as_warn ("Divide by zero.");
+ as_warn (_("Divide by zero."));
if (mips_trap)
macro_build ((char *) NULL, &icnt, NULL, "teq", "s,t", 0, 0);
else
- macro_build ((char *) NULL, &icnt, NULL, "break", "c", 7);
+ macro_build ((char *) NULL, &icnt, NULL, "break", "c", 7);
return;
}
mips_emit_delays (true);
- ++mips_noreorder;
+ ++mips_opts.noreorder;
mips_any_noreorder = 1;
- macro_build ((char *) NULL, &icnt, NULL,
- dbl ? "ddiv" : "div",
- "z,s,t", sreg, treg);
if (mips_trap)
- macro_build ((char *) NULL, &icnt, NULL, "teq", "s,t", treg, 0);
+ {
+ macro_build ((char *) NULL, &icnt, NULL, "teq", "s,t", treg, 0);
+ macro_build ((char *) NULL, &icnt, NULL,
+ dbl ? "ddiv" : "div",
+ "z,s,t", sreg, treg);
+ }
else
{
expr1.X_add_number = 8;
macro_build ((char *) NULL, &icnt, &expr1, "bne", "s,t,p", treg, 0);
- macro_build ((char *) NULL, &icnt, NULL, "nop", "", 0);
- macro_build ((char *) NULL, &icnt, NULL, "break", "c", 7);
+ macro_build ((char *) NULL, &icnt, NULL,
+ dbl ? "ddiv" : "div",
+ "z,s,t", sreg, treg);
+ macro_build ((char *) NULL, &icnt, NULL, "break", "c", 7);
}
expr1.X_add_number = -1;
macro_build ((char *) NULL, &icnt, &expr1,
(int) BFD_RELOC_HI16);
}
if (mips_trap)
- macro_build ((char *) NULL, &icnt, NULL, "teq", "s,t", sreg, AT);
+ {
+ macro_build ((char *) NULL, &icnt, NULL, "teq", "s,t", sreg, AT);
+ /* We want to close the noreorder block as soon as possible, so
+ that later insns are available for delay slot filling. */
+ --mips_opts.noreorder;
+ }
else
{
expr1.X_add_number = 8;
macro_build ((char *) NULL, &icnt, &expr1, "bne", "s,t,p", sreg, AT);
macro_build ((char *) NULL, &icnt, NULL, "nop", "", 0);
- macro_build ((char *) NULL, &icnt, NULL, "break", "c", 6);
+
+ /* We want to close the noreorder block as soon as possible, so
+ that later insns are available for delay slot filling. */
+ --mips_opts.noreorder;
+
+ macro_build ((char *) NULL, &icnt, NULL, "break", "c", 6);
}
- --mips_noreorder;
macro_build ((char *) NULL, &icnt, NULL, s, "d", dreg);
break;
s = "ddivu";
s2 = "mfhi";
do_divi:
- if (imm_expr.X_add_number == 0)
+ if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
{
- as_warn ("Divide by zero.");
+ as_warn (_("Divide by zero."));
if (mips_trap)
macro_build ((char *) NULL, &icnt, NULL, "teq", "s,t", 0, 0);
else
- macro_build ((char *) NULL, &icnt, NULL, "break", "c", 7);
+ macro_build ((char *) NULL, &icnt, NULL, "break", "c", 7);
return;
}
- if (imm_expr.X_add_number == 1)
+ if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 1)
{
if (strcmp (s2, "mflo") == 0)
macro_build ((char *) NULL, &icnt, NULL, "move", "d,s", dreg,
macro_build ((char *) NULL, &icnt, NULL, "move", "d,s", dreg, 0);
return;
}
- if (imm_expr.X_add_number == -1
+ if (imm_expr.X_op == O_constant
+ && imm_expr.X_add_number == -1
&& s[strlen (s) - 1] != 'u')
{
if (strcmp (s2, "mflo") == 0)
s2 = "mfhi";
do_divu3:
mips_emit_delays (true);
- ++mips_noreorder;
+ ++mips_opts.noreorder;
mips_any_noreorder = 1;
- macro_build ((char *) NULL, &icnt, NULL, s, "z,s,t", sreg, treg);
if (mips_trap)
- macro_build ((char *) NULL, &icnt, NULL, "teq", "s,t", treg, 0);
+ {
+ macro_build ((char *) NULL, &icnt, NULL, "teq", "s,t", treg, 0);
+ macro_build ((char *) NULL, &icnt, NULL, s, "z,s,t", sreg, treg);
+ /* We want to close the noreorder block as soon as possible, so
+ that later insns are available for delay slot filling. */
+ --mips_opts.noreorder;
+ }
else
{
expr1.X_add_number = 8;
macro_build ((char *) NULL, &icnt, &expr1, "bne", "s,t,p", treg, 0);
- macro_build ((char *) NULL, &icnt, NULL, "nop", "", 0);
- macro_build ((char *) NULL, &icnt, NULL, "break", "c", 7);
+ macro_build ((char *) NULL, &icnt, NULL, s, "z,s,t", sreg, treg);
+
+ /* We want to close the noreorder block as soon as possible, so
+ that later insns are available for delay slot filling. */
+ --mips_opts.noreorder;
+ macro_build ((char *) NULL, &icnt, NULL, "break", "c", 7);
}
- --mips_noreorder;
macro_build ((char *) NULL, &icnt, NULL, s2, "d", dreg);
return;
/* When generating embedded PIC code, we permit expressions of
the form
la $4,foo-bar
- where bar is an address in the .text section. These are used
+ where bar is an address in the current section. These are used
when getting the addresses of functions. We don't permit
X_add_number to be non-zero, because if the symbol is
external the relaxing code needs to know that any addend is
purely the offset to X_op_symbol. */
if (mips_pic == EMBEDDED_PIC
&& offset_expr.X_op == O_subtract
- && now_seg == text_section
- && (offset_expr.X_op_symbol->sy_value.X_op == O_constant
- ? S_GET_SEGMENT (offset_expr.X_op_symbol) == text_section
- : (offset_expr.X_op_symbol->sy_value.X_op == O_symbol
- && (S_GET_SEGMENT (offset_expr.X_op_symbol
- ->sy_value.X_add_symbol)
- == text_section)))
+ && (symbol_constant_p (offset_expr.X_op_symbol)
+ ? S_GET_SEGMENT (offset_expr.X_op_symbol) == now_seg
+ : (symbol_equated_p (offset_expr.X_op_symbol)
+ && (S_GET_SEGMENT
+ (symbol_get_value_expression (offset_expr.X_op_symbol)
+ ->X_add_symbol)
+ == now_seg)))
&& breg == 0
- && offset_expr.X_add_number == 0)
+ && (offset_expr.X_add_number == 0
+ || OUTPUT_FLAVOR == bfd_target_elf_flavour))
{
macro_build ((char *) NULL, &icnt, &offset_expr, "lui", "t,u",
treg, (int) BFD_RELOC_PCREL_HI16_S);
macro_build ((char *) NULL, &icnt, &offset_expr,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", treg, treg, (int) BFD_RELOC_PCREL_LO16);
return;
}
if (offset_expr.X_op != O_symbol
&& offset_expr.X_op != O_constant)
{
- as_bad ("expression too complex");
+ as_bad (_("expression too complex"));
offset_expr.X_op = O_constant;
}
If we have a constant, we need two instructions anyhow,
so we may as well always use the latter form. */
if ((valueT) offset_expr.X_add_number >= MAX_GPREL_OFFSET
- || nopic_need_relax (offset_expr.X_add_symbol))
+ || nopic_need_relax (offset_expr.X_add_symbol, 1))
p = NULL;
else
{
frag_grow (20);
macro_build ((char *) NULL, &icnt, &offset_expr,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", tempreg, GP, (int) BFD_RELOC_MIPS_GPREL);
p = frag_var (rs_machine_dependent, 8, 0,
RELAX_ENCODE (4, 8, 0, 4, 0,
- mips_warn_about_macros),
- offset_expr.X_add_symbol, (long) 0,
+ mips_opts.warn_about_macros),
+ offset_expr.X_add_symbol, (offsetT) 0,
(char *) NULL);
}
macro_build_lui (p, &icnt, &offset_expr, tempreg);
if (p != NULL)
p += 4;
macro_build (p, &icnt, &offset_expr,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", tempreg, tempreg, (int) BFD_RELOC_LO16);
}
else if (mips_pic == SVR4_PIC && ! mips_big_got)
p = frag_var (rs_machine_dependent, 8 - off, 0,
RELAX_ENCODE (0, 8 - off, -4 - off, 4 - off, 0,
(breg == 0
- ? mips_warn_about_macros
+ ? mips_opts.warn_about_macros
: 0)),
- offset_expr.X_add_symbol, (long) 0,
+ offset_expr.X_add_symbol, (offsetT) 0,
(char *) NULL);
if (breg == 0)
{
p += 4;
}
macro_build (p, &icnt, &expr1,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", tempreg, tempreg, (int) BFD_RELOC_LO16);
/* FIXME: If breg == 0, and the next instruction uses
$tempreg, then if this variant case is used an extra
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
"nop", "");
macro_build ((char *) NULL, &icnt, &expr1,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", tempreg, tempreg, (int) BFD_RELOC_LO16);
(void) frag_var (rs_machine_dependent, 0, 0,
RELAX_ENCODE (0, 0, -12, -4, 0, 0),
- offset_expr.X_add_symbol, (long) 0,
+ offset_expr.X_add_symbol, (offsetT) 0,
(char *) NULL);
}
else
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
"nop", "");
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", treg, AT, breg);
breg = 0;
tempreg = treg;
mips_optimize = hold_mips_optimize;
macro_build ((char *) NULL, &icnt, &expr1,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", AT, AT, (int) BFD_RELOC_LO16);
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", tempreg, tempreg, AT);
(void) frag_var (rs_machine_dependent, 0, 0,
RELAX_ENCODE (0, 0, -16 + off1, -8, 0, 0),
- offset_expr.X_add_symbol, (long) 0,
+ offset_expr.X_add_symbol, (offsetT) 0,
(char *) NULL);
used_at = 1;
}
macro_build ((char *) NULL, &icnt, &offset_expr, "lui", "t,u",
tempreg, (int) BFD_RELOC_MIPS_GOT_HI16);
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", tempreg, tempreg, GP);
macro_build ((char *) NULL, &icnt, &offset_expr,
dbl ? "ld" : "lw",
RELAX_ENCODE (12 + off, 12 + gpdel, gpdel,
8 + gpdel, 0,
(breg == 0
- ? mips_warn_about_macros
+ ? mips_opts.warn_about_macros
: 0)),
- offset_expr.X_add_symbol, (long) 0,
+ offset_expr.X_add_symbol, (offsetT) 0,
(char *) NULL);
}
else if (expr1.X_add_number >= -0x8000
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
"nop", "");
macro_build ((char *) NULL, &icnt, &expr1,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", tempreg, tempreg, (int) BFD_RELOC_LO16);
p = frag_var (rs_machine_dependent, 12 + gpdel, 0,
RELAX_ENCODE (20, 12 + gpdel, gpdel, 8 + gpdel, 0,
(breg == 0
- ? mips_warn_about_macros
+ ? mips_opts.warn_about_macros
: 0)),
- offset_expr.X_add_symbol, (long) 0,
+ offset_expr.X_add_symbol, (offsetT) 0,
(char *) NULL);
}
else
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
"nop", "");
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", treg, AT, breg);
dreg = treg;
adj = 8;
mips_optimize = hold_mips_optimize;
macro_build ((char *) NULL, &icnt, &expr1,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", AT, AT, (int) BFD_RELOC_LO16);
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", dreg, dreg, AT);
p = frag_var (rs_machine_dependent, 16 + gpdel + adj, 0,
RELAX_ENCODE (24 + adj, 16 + gpdel + adj, gpdel,
8 + gpdel, 0,
(breg == 0
- ? mips_warn_about_macros
+ ? mips_opts.warn_about_macros
: 0)),
- offset_expr.X_add_symbol, (long) 0,
+ offset_expr.X_add_symbol, (offsetT) 0,
(char *) NULL);
used_at = 1;
macro_build (p, &icnt, (expressionS *) NULL, "nop", "");
p += 4;
macro_build (p, &icnt, &expr1,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", tempreg, tempreg, (int) BFD_RELOC_LO16);
/* FIXME: If add_number is 0, and there was no base
register, the external symbol case ended with a load,
macro_build (p, &icnt, (expressionS *) NULL, "nop", "");
p += 4;
macro_build (p, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", treg, AT, breg);
p += 4;
tempreg = treg;
macro_build_lui (p, &icnt, &expr1, AT);
p += 4;
macro_build (p, &icnt, &expr1,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", AT, AT, (int) BFD_RELOC_LO16);
p += 4;
macro_build (p, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", tempreg, tempreg, AT);
p += 4;
}
addiu $tempreg,$gp,<sym> (BFD_RELOC_MIPS_GPREL)
*/
macro_build ((char *) NULL, &icnt, &offset_expr,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", tempreg, GP, (int) BFD_RELOC_MIPS_GPREL);
}
else
if (breg != 0)
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", treg, tempreg, breg);
if (! used_at)
else if (mips_pic == SVR4_PIC)
{
if (sreg != PIC_CALL_REG)
- as_warn ("MIPS PIC call to register other than $25");
+ as_warn (_("MIPS PIC call to register other than $25"));
macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "jalr",
"d,s", dreg, sreg);
if (mips_cprestore_offset < 0)
- as_warn ("No .cprestore pseudo-op used in PIC code");
+ as_warn (_("No .cprestore pseudo-op used in PIC code"));
else
{
expr1.X_add_number = mips_cprestore_offset;
macro_build ((char *) NULL, &icnt, &expr1,
- mips_isa < 3 ? "lw" : "ld",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "lw" : "ld"),
"t,o(b)", GP, (int) BFD_RELOC_LO16, mips_frame_reg);
}
}
if (! mips_big_got)
{
macro_build ((char *) NULL, &icnt, &offset_expr,
- mips_isa < 3 ? "lw" : "ld",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "lw" : "ld"),
"t,o(b)", PIC_CALL_REG,
(int) BFD_RELOC_MIPS_CALL16, GP);
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
"nop", "");
p = frag_var (rs_machine_dependent, 4, 0,
RELAX_ENCODE (0, 4, -8, 0, 0, 0),
- offset_expr.X_add_symbol, (long) 0, (char *) NULL);
+ offset_expr.X_add_symbol, (offsetT) 0,
+ (char *) NULL);
}
else
{
macro_build ((char *) NULL, &icnt, &offset_expr, "lui", "t,u",
PIC_CALL_REG, (int) BFD_RELOC_MIPS_CALL_HI16);
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", PIC_CALL_REG, PIC_CALL_REG, GP);
macro_build ((char *) NULL, &icnt, &offset_expr,
- mips_isa < 3 ? "lw" : "ld",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "lw" : "ld"),
"t,o(b)", PIC_CALL_REG,
(int) BFD_RELOC_MIPS_CALL_LO16, PIC_CALL_REG);
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
p = frag_var (rs_machine_dependent, 12 + gpdel, 0,
RELAX_ENCODE (16, 12 + gpdel, gpdel, 8 + gpdel,
0, 0),
- offset_expr.X_add_symbol, (long) 0, (char *) NULL);
+ offset_expr.X_add_symbol, (offsetT) 0,
+ (char *) NULL);
if (gpdel > 0)
{
macro_build (p, &icnt, (expressionS *) NULL, "nop", "");
p += 4;
}
macro_build (p, &icnt, &offset_expr,
- mips_isa < 3 ? "lw" : "ld",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "lw" : "ld"),
"t,o(b)", PIC_CALL_REG,
(int) BFD_RELOC_MIPS_GOT16, GP);
p += 4;
p += 4;
}
macro_build (p, &icnt, &offset_expr,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", PIC_CALL_REG, PIC_CALL_REG,
(int) BFD_RELOC_LO16);
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
"jalr", "s", PIC_CALL_REG);
if (mips_cprestore_offset < 0)
- as_warn ("No .cprestore pseudo-op used in PIC code");
+ as_warn (_("No .cprestore pseudo-op used in PIC code"));
else
{
- if (mips_noreorder)
+ if (mips_opts.noreorder)
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
"nop", "");
expr1.X_add_number = mips_cprestore_offset;
macro_build ((char *) NULL, &icnt, &expr1,
- mips_isa < 3 ? "lw" : "ld",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "lw" : "ld"),
"t,o(b)", GP, (int) BFD_RELOC_LO16,
mips_frame_reg);
}
goto ld;
case M_LWC0_AB:
s = "lwc0";
+ /* Itbl support may require additional care here. */
coproc = 1;
goto ld;
case M_LWC1_AB:
s = "lwc1";
+ /* Itbl support may require additional care here. */
coproc = 1;
goto ld;
case M_LWC2_AB:
s = "lwc2";
+ /* Itbl support may require additional care here. */
coproc = 1;
goto ld;
case M_LWC3_AB:
s = "lwc3";
+ /* Itbl support may require additional care here. */
coproc = 1;
goto ld;
case M_LWL_AB:
lr = 1;
goto ld;
case M_LDC1_AB:
+ if (mips_cpu == 4650)
+ {
+ as_bad (_("opcode not supported on this processor"));
+ return;
+ }
s = "ldc1";
+ /* Itbl support may require additional care here. */
coproc = 1;
goto ld;
case M_LDC2_AB:
s = "ldc2";
+ /* Itbl support may require additional care here. */
coproc = 1;
goto ld;
case M_LDC3_AB:
s = "ldc3";
+ /* Itbl support may require additional care here. */
coproc = 1;
goto ld;
case M_LDL_AB:
goto st;
case M_SWC0_AB:
s = "swc0";
+ /* Itbl support may require additional care here. */
coproc = 1;
goto st;
case M_SWC1_AB:
s = "swc1";
+ /* Itbl support may require additional care here. */
coproc = 1;
goto st;
case M_SWC2_AB:
s = "swc2";
+ /* Itbl support may require additional care here. */
coproc = 1;
goto st;
case M_SWC3_AB:
s = "swc3";
+ /* Itbl support may require additional care here. */
coproc = 1;
goto st;
case M_SWL_AB:
s = "scd";
goto st;
case M_SDC1_AB:
+ if (mips_cpu == 4650)
+ {
+ as_bad (_("opcode not supported on this processor"));
+ return;
+ }
s = "sdc1";
coproc = 1;
+ /* Itbl support may require additional care here. */
goto st;
case M_SDC2_AB:
s = "sdc2";
+ /* Itbl support may require additional care here. */
coproc = 1;
goto st;
case M_SDC3_AB:
s = "sdc3";
+ /* Itbl support may require additional care here. */
coproc = 1;
goto st;
case M_SDL_AB:
tempreg = AT;
used_at = 1;
ld_st:
+ /* Itbl support may require additional care here. */
if (mask == M_LWC1_AB
|| mask == M_SWC1_AB
|| mask == M_LDC1_AB
if (offset_expr.X_op != O_constant
&& offset_expr.X_op != O_symbol)
{
- as_bad ("expression too complex");
+ as_bad (_("expression too complex"));
offset_expr.X_op = O_constant;
}
if (breg == 0)
{
if ((valueT) offset_expr.X_add_number >= MAX_GPREL_OFFSET
- || nopic_need_relax (offset_expr.X_add_symbol))
+ || nopic_need_relax (offset_expr.X_add_symbol, 1))
p = NULL;
else
{
treg, (int) BFD_RELOC_MIPS_GPREL, GP);
p = frag_var (rs_machine_dependent, 8, 0,
RELAX_ENCODE (4, 8, 0, 4, 0,
- (mips_warn_about_macros
- || (used_at && mips_noat))),
- offset_expr.X_add_symbol, (long) 0,
+ (mips_opts.warn_about_macros
+ || (used_at
+ && mips_opts.noat))),
+ offset_expr.X_add_symbol, (offsetT) 0,
(char *) NULL);
used_at = 0;
}
else
{
if ((valueT) offset_expr.X_add_number >= MAX_GPREL_OFFSET
- || nopic_need_relax (offset_expr.X_add_symbol))
+ || nopic_need_relax (offset_expr.X_add_symbol, 1))
p = NULL;
else
{
frag_grow (28);
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", tempreg, breg, GP);
macro_build ((char *) NULL, &icnt, &offset_expr, s, fmt,
treg, (int) BFD_RELOC_MIPS_GPREL, tempreg);
p = frag_var (rs_machine_dependent, 12, 0,
RELAX_ENCODE (8, 12, 0, 8, 0, 0),
- offset_expr.X_add_symbol, (long) 0,
+ offset_expr.X_add_symbol, (offsetT) 0,
(char *) NULL);
}
macro_build_lui (p, &icnt, &offset_expr, tempreg);
if (p != NULL)
p += 4;
macro_build (p, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", tempreg, tempreg, breg);
if (p != NULL)
p += 4;
offset_expr.X_add_number = 0;
if (expr1.X_add_number < -0x8000
|| expr1.X_add_number >= 0x8000)
- as_bad ("PIC code offset overflow (max 16 signed bits)");
+ as_bad (_("PIC code offset overflow (max 16 signed bits)"));
frag_grow (20);
macro_build ((char *) NULL, &icnt, &offset_expr,
- mips_isa < 3 ? "lw" : "ld",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "lw" : "ld"),
"t,o(b)", tempreg, (int) BFD_RELOC_MIPS_GOT16, GP);
macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "nop", "");
p = frag_var (rs_machine_dependent, 4, 0,
RELAX_ENCODE (0, 4, -8, 0, 0, 0),
- offset_expr.X_add_symbol, (long) 0,
+ offset_expr.X_add_symbol, (offsetT) 0,
(char *) NULL);
macro_build (p, &icnt, &offset_expr,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", tempreg, tempreg, (int) BFD_RELOC_LO16);
if (breg != 0)
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", tempreg, tempreg, breg);
macro_build ((char *) NULL, &icnt, &expr1, s, fmt, treg,
(int) BFD_RELOC_LO16, tempreg);
offset_expr.X_add_number = 0;
if (expr1.X_add_number < -0x8000
|| expr1.X_add_number >= 0x8000)
- as_bad ("PIC code offset overflow (max 16 signed bits)");
+ as_bad (_("PIC code offset overflow (max 16 signed bits)"));
if (reg_needs_delay (GP))
gpdel = 4;
else
macro_build ((char *) NULL, &icnt, &offset_expr, "lui", "t,u",
tempreg, (int) BFD_RELOC_MIPS_GOT_HI16);
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", tempreg, tempreg, GP);
macro_build ((char *) NULL, &icnt, &offset_expr,
- mips_isa < 3 ? "lw" : "ld",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "lw" : "ld"),
"t,o(b)", tempreg, (int) BFD_RELOC_MIPS_GOT_LO16,
tempreg);
p = frag_var (rs_machine_dependent, 12 + gpdel, 0,
RELAX_ENCODE (12, 12 + gpdel, gpdel, 8 + gpdel, 0, 0),
- offset_expr.X_add_symbol, (long) 0, (char *) NULL);
+ offset_expr.X_add_symbol, (offsetT) 0, (char *) NULL);
if (gpdel > 0)
{
macro_build (p, &icnt, (expressionS *) NULL, "nop", "");
p += 4;
}
macro_build (p, &icnt, &offset_expr,
- mips_isa < 3 ? "lw" : "ld",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "lw" : "ld"),
"t,o(b)", tempreg, (int) BFD_RELOC_MIPS_GOT16, GP);
p += 4;
macro_build (p, &icnt, (expressionS *) NULL, "nop", "");
p += 4;
macro_build (p, &icnt, &offset_expr,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", tempreg, tempreg, (int) BFD_RELOC_LO16);
if (breg != 0)
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", tempreg, tempreg, breg);
macro_build ((char *) NULL, &icnt, &expr1, s, fmt, treg,
(int) BFD_RELOC_LO16, tempreg);
else
{
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", tempreg, breg, GP);
macro_build ((char *) NULL, &icnt, &offset_expr, s, fmt,
treg, (int) BFD_RELOC_MIPS_GPREL, tempreg);
return;
}
- case M_LI_D:
+ case M_LI_D:
+ /* If we have a constant in IMM_EXPR, then in mips3 mode it is
+ the entire value, and in mips1 mode it is the high order 32
+ bits of the value and the low order 32 bits are either zero
+ or in offset_expr. */
+ if (imm_expr.X_op == O_constant || imm_expr.X_op == O_big)
+ {
+ if (ISA_HAS_64BIT_REGS (mips_opts.isa))
+ load_register (&icnt, treg, &imm_expr, 1);
+ else
+ {
+ int hreg, lreg;
+
+ if (target_big_endian)
+ {
+ hreg = treg;
+ lreg = treg + 1;
+ }
+ else
+ {
+ hreg = treg + 1;
+ lreg = treg;
+ }
+
+ if (hreg <= 31)
+ load_register (&icnt, hreg, &imm_expr, 0);
+ if (lreg <= 31)
+ {
+ if (offset_expr.X_op == O_absent)
+ macro_build ((char *) NULL, &icnt, NULL, "move", "d,s",
+ lreg, 0);
+ else
+ {
+ assert (offset_expr.X_op == O_constant);
+ load_register (&icnt, lreg, &offset_expr, 0);
+ }
+ }
+ }
+ return;
+ }
+
/* We know that sym is in the .rdata section. First we get the
upper 16 bits of the address. */
if (mips_pic == NO_PIC)
else if (mips_pic == SVR4_PIC)
{
macro_build ((char *) NULL, &icnt, &offset_expr,
- mips_isa < 3 ? "lw" : "ld",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "lw" : "ld"),
"t,o(b)", AT, (int) BFD_RELOC_MIPS_GOT16, GP);
}
else if (mips_pic == EMBEDDED_PIC)
/* For embedded PIC we pick up the entire address off $gp in
a single instruction. */
macro_build ((char *) NULL, &icnt, &offset_expr,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", AT, GP, (int) BFD_RELOC_MIPS_GPREL);
offset_expr.X_op = O_constant;
offset_expr.X_add_number = 0;
abort ();
/* Now we load the register(s). */
- if (mips_isa >= 3)
+ if (ISA_HAS_64BIT_REGS (mips_opts.isa))
macro_build ((char *) NULL, &icnt, &offset_expr, "ld", "t,o(b)",
treg, (int) BFD_RELOC_LO16, AT);
else
break;
case M_LI_DD:
+ /* If we have a constant in IMM_EXPR, then in mips3 mode it is
+ the entire value, and in mips1 mode it is the high order 32
+ bits of the value and the low order 32 bits are either zero
+ or in offset_expr. */
+ if (imm_expr.X_op == O_constant || imm_expr.X_op == O_big)
+ {
+ load_register (&icnt, AT, &imm_expr, ISA_HAS_64BIT_REGS (mips_opts.isa));
+ if (ISA_HAS_64BIT_REGS (mips_opts.isa))
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
+ "dmtc1", "t,S", AT, treg);
+ else
+ {
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
+ "mtc1", "t,G", AT, treg + 1);
+ if (offset_expr.X_op == O_absent)
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
+ "mtc1", "t,G", 0, treg);
+ else
+ {
+ assert (offset_expr.X_op == O_constant);
+ load_register (&icnt, AT, &offset_expr, 0);
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
+ "mtc1", "t,G", AT, treg);
+ }
+ }
+ break;
+ }
+
assert (offset_expr.X_op == O_symbol
&& offset_expr.X_add_number == 0);
s = segment_name (S_GET_SEGMENT (offset_expr.X_add_symbol));
if (strcmp (s, ".lit8") == 0)
{
- if (mips_isa >= 2)
+ if (mips_opts.isa != 1)
{
macro_build ((char *) NULL, &icnt, &offset_expr, "ldc1",
"T,o(b)", treg, (int) BFD_RELOC_MIPS_LITERAL, GP);
assert (strcmp (s, RDATA_SECTION_NAME) == 0);
if (mips_pic == SVR4_PIC)
macro_build ((char *) NULL, &icnt, &offset_expr,
- mips_isa < 3 ? "lw" : "ld",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "lw" : "ld"),
"t,o(b)", AT, (int) BFD_RELOC_MIPS_GOT16, GP);
else
{
macro_build_lui ((char *) NULL, &icnt, &offset_expr, AT);
}
- if (mips_isa >= 2)
+ if (mips_opts.isa != 1)
{
macro_build ((char *) NULL, &icnt, &offset_expr, "ldc1",
"T,o(b)", treg, (int) BFD_RELOC_LO16, AT);
}
case M_L_DOB:
+ if (mips_cpu == 4650)
+ {
+ as_bad (_("opcode not supported on this processor"));
+ return;
+ }
/* Even on a big endian machine $fn comes before $fn+1. We have
to adjust when loading from memory. */
r = BFD_RELOC_LO16;
dob:
- assert (mips_isa < 2);
+ assert (mips_opts.isa == 1);
macro_build ((char *) NULL, &icnt, &offset_expr, "lwc1", "T,o(b)",
target_big_endian ? treg + 1 : treg,
(int) r, breg);
* But, the resulting address is the same after relocation so why
* generate the extra instruction?
*/
+ if (mips_cpu == 4650)
+ {
+ as_bad (_("opcode not supported on this processor"));
+ return;
+ }
+ /* Itbl support may require additional care here. */
coproc = 1;
- if (mips_isa >= 2)
+ if (mips_opts.isa != 1)
{
s = "ldc1";
goto ld;
goto ldd_std;
case M_S_DAB:
- if (mips_isa >= 2)
+ if (mips_cpu == 4650)
+ {
+ as_bad (_("opcode not supported on this processor"));
+ return;
+ }
+
+ if (mips_opts.isa != 1)
{
s = "sdc1";
goto st;
s = "swc1";
fmt = "T,o(b)";
+ /* Itbl support may require additional care here. */
coproc = 1;
goto ldd_std;
case M_LD_AB:
- if (mips_isa >= 3)
+ if (ISA_HAS_64BIT_REGS (mips_opts.isa))
{
s = "ld";
goto ld;
goto ldd_std;
case M_SD_AB:
- if (mips_isa >= 3)
+ if (ISA_HAS_64BIT_REGS (mips_opts.isa))
{
s = "sd";
goto st;
if (offset_expr.X_op != O_symbol
&& offset_expr.X_op != O_constant)
{
- as_bad ("expression too complex");
+ as_bad (_("expression too complex"));
offset_expr.X_op = O_constant;
}
/* Even on a big endian machine $fn comes before $fn+1. We have
to adjust when loading from memory. We set coproc if we must
load $fn+1 first. */
+ /* Itbl support may require additional care here. */
if (! target_big_endian)
coproc = 0;
lui instruction. If there is a constant, we always use
the last case. */
if ((valueT) offset_expr.X_add_number >= MAX_GPREL_OFFSET
- || nopic_need_relax (offset_expr.X_add_symbol))
+ || nopic_need_relax (offset_expr.X_add_symbol, 1))
{
p = NULL;
used_at = 1;
{
frag_grow (36);
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", AT, breg, GP);
tempreg = AT;
off = 4;
used_at = 1;
}
+ /* Itbl support may require additional care here. */
macro_build ((char *) NULL, &icnt, &offset_expr, s, fmt,
coproc ? treg + 1 : treg,
(int) BFD_RELOC_MIPS_GPREL, tempreg);
undesired nop. */
hold_mips_optimize = mips_optimize;
mips_optimize = 2;
+ /* Itbl support may require additional care here. */
macro_build ((char *) NULL, &icnt, &offset_expr, s, fmt,
coproc ? treg : treg + 1,
(int) BFD_RELOC_MIPS_GPREL, tempreg);
p = frag_var (rs_machine_dependent, 12 + off, 0,
RELAX_ENCODE (8 + off, 12 + off, 0, 4 + off, 1,
- used_at && mips_noat),
- offset_expr.X_add_symbol, (long) 0,
+ used_at && mips_opts.noat),
+ offset_expr.X_add_symbol, (offsetT) 0,
(char *) NULL);
/* We just generated two relocs. When tc_gen_reloc
subtract it out, and then subtract another 4 to make
the first reloc come out right. The second reloc
will come out right because we are going to add 4 to
- offset_expr when we build its instruction below. */
- offset_expr.X_add_number -= 8;
- offset_expr.X_op = O_constant;
+ offset_expr when we build its instruction below.
+
+ If we have a symbol, then we don't want to include
+ the offset, because it will wind up being included
+ when we generate the reloc. */
+
+ if (offset_expr.X_op == O_constant)
+ offset_expr.X_add_number -= 8;
+ else
+ {
+ offset_expr.X_add_number = -4;
+ offset_expr.X_op = O_constant;
+ }
}
macro_build_lui (p, &icnt, &offset_expr, AT);
if (p != NULL)
if (breg != 0)
{
macro_build (p, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", AT, breg, AT);
if (p != NULL)
p += 4;
}
+ /* Itbl support may require additional care here. */
macro_build (p, &icnt, &offset_expr, s, fmt,
coproc ? treg + 1 : treg,
(int) BFD_RELOC_LO16, AT);
p += 4;
/* FIXME: How do we handle overflow here? */
offset_expr.X_add_number += 4;
+ /* Itbl support may require additional care here. */
macro_build (p, &icnt, &offset_expr, s, fmt,
coproc ? treg : treg + 1,
(int) BFD_RELOC_LO16, AT);
offset_expr.X_add_number = 0;
if (expr1.X_add_number < -0x8000
|| expr1.X_add_number >= 0x8000 - 4)
- as_bad ("PIC code offset overflow (max 16 signed bits)");
+ as_bad (_("PIC code offset overflow (max 16 signed bits)"));
if (breg == 0)
off = 0;
else
off = 4;
frag_grow (24 + off);
macro_build ((char *) NULL, &icnt, &offset_expr,
- mips_isa < 3 ? "lw" : "ld",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "lw" : "ld"),
"t,o(b)", AT, (int) BFD_RELOC_MIPS_GOT16, GP);
macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "nop", "");
if (breg != 0)
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", AT, breg, AT);
+ /* Itbl support may require additional care here. */
macro_build ((char *) NULL, &icnt, &expr1, s, fmt,
coproc ? treg + 1 : treg,
(int) BFD_RELOC_LO16, AT);
nop. */
hold_mips_optimize = mips_optimize;
mips_optimize = 2;
+ /* Itbl support may require additional care here. */
macro_build ((char *) NULL, &icnt, &expr1, s, fmt,
coproc ? treg : treg + 1,
(int) BFD_RELOC_LO16, AT);
(void) frag_var (rs_machine_dependent, 0, 0,
RELAX_ENCODE (0, 0, -16 - off, -8, 1, 0),
- offset_expr.X_add_symbol, (long) 0,
+ offset_expr.X_add_symbol, (offsetT) 0,
(char *) NULL);
}
else if (mips_pic == SVR4_PIC)
offset_expr.X_add_number = 0;
if (expr1.X_add_number < -0x8000
|| expr1.X_add_number >= 0x8000 - 4)
- as_bad ("PIC code offset overflow (max 16 signed bits)");
+ as_bad (_("PIC code offset overflow (max 16 signed bits)"));
if (reg_needs_delay (GP))
gpdel = 4;
else
macro_build ((char *) NULL, &icnt, &offset_expr, "lui", "t,u",
AT, (int) BFD_RELOC_MIPS_GOT_HI16);
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", AT, AT, GP);
macro_build ((char *) NULL, &icnt, &offset_expr,
- mips_isa < 3 ? "lw" : "ld",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "lw" : "ld"),
"t,o(b)", AT, (int) BFD_RELOC_MIPS_GOT_LO16, AT);
macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "nop", "");
if (breg != 0)
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", AT, breg, AT);
+ /* Itbl support may require additional care here. */
macro_build ((char *) NULL, &icnt, &expr1, s, fmt,
coproc ? treg + 1 : treg,
(int) BFD_RELOC_LO16, AT);
nop. */
hold_mips_optimize = mips_optimize;
mips_optimize = 2;
+ /* Itbl support may require additional care here. */
macro_build ((char *) NULL, &icnt, &expr1, s, fmt,
coproc ? treg : treg + 1,
(int) BFD_RELOC_LO16, AT);
p = frag_var (rs_machine_dependent, 16 + gpdel + off, 0,
RELAX_ENCODE (24 + off, 16 + gpdel + off, gpdel,
8 + gpdel + off, 1, 0),
- offset_expr.X_add_symbol, (long) 0,
+ offset_expr.X_add_symbol, (offsetT) 0,
(char *) NULL);
if (gpdel > 0)
{
p += 4;
}
macro_build (p, &icnt, &offset_expr,
- mips_isa < 3 ? "lw" : "ld",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "lw" : "ld"),
"t,o(b)", AT, (int) BFD_RELOC_MIPS_GOT16, GP);
p += 4;
macro_build (p, &icnt, (expressionS *) NULL, "nop", "");
if (breg != 0)
{
macro_build (p, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", AT, breg, AT);
p += 4;
}
+ /* Itbl support may require additional care here. */
macro_build (p, &icnt, &expr1, s, fmt,
coproc ? treg + 1 : treg,
(int) BFD_RELOC_LO16, AT);
nop. */
hold_mips_optimize = mips_optimize;
mips_optimize = 2;
+ /* Itbl support may require additional care here. */
macro_build (p, &icnt, &expr1, s, fmt,
coproc ? treg : treg + 1,
(int) BFD_RELOC_LO16, AT);
else
{
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", AT, breg, GP);
tempreg = AT;
used_at = 1;
}
+ /* Itbl support may require additional care here. */
macro_build ((char *) NULL, &icnt, &offset_expr, s, fmt,
coproc ? treg + 1 : treg,
(int) BFD_RELOC_MIPS_GPREL, tempreg);
offset_expr.X_add_number += 4;
+ /* Itbl support may require additional care here. */
macro_build ((char *) NULL, &icnt, &offset_expr, s, fmt,
coproc ? treg : treg + 1,
(int) BFD_RELOC_MIPS_GPREL, tempreg);
case M_SD_OB:
s = "sw";
sd_ob:
- assert (mips_isa < 3);
+ assert (bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa));
macro_build ((char *) NULL, &icnt, &offset_expr, s, "t,o(b)", treg,
(int) BFD_RELOC_LO16, breg);
offset_expr.X_add_number += 4;
macro_build ((char *) NULL, &icnt, &offset_expr, s, "t,o(b)", treg + 1,
(int) BFD_RELOC_LO16, breg);
return;
+
+ /* New code added to support COPZ instructions.
+ This code builds table entries out of the macros in mip_opcodes.
+ R4000 uses interlocks to handle coproc delays.
+ Other chips (like the R3000) require nops to be inserted for delays.
+
+ FIXME: Currently, we require that the user handle delays.
+ In order to fill delay slots for non-interlocked chips,
+ we must have a way to specify delays based on the coprocessor.
+ Eg. 4 cycles if load coproc reg from memory, 1 if in cache, etc.
+ What are the side-effects of the cop instruction?
+ What cache support might we have and what are its effects?
+ Both coprocessor & memory require delays. how long???
+ What registers are read/set/modified?
+
+ If an itbl is provided to interpret cop instructions,
+ this knowledge can be encoded in the itbl spec. */
+
+ case M_COP0:
+ s = "c0";
+ goto copz;
+ case M_COP1:
+ s = "c1";
+ goto copz;
+ case M_COP2:
+ s = "c2";
+ goto copz;
+ case M_COP3:
+ s = "c3";
+ copz:
+ /* For now we just do C (same as Cz). The parameter will be
+ stored in insn_opcode by mips_ip. */
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL, s, "C",
+ ip->insn_opcode);
+ return;
+
#ifdef LOSING_COMPILER
default:
+ /* Try and see if this is a new itbl instruction.
+ This code builds table entries out of the macros in mip_opcodes.
+ FIXME: For now we just assemble the expression and pass it's
+ value along as a 32-bit immediate.
+ We may want to have the assembler assemble this value,
+ so that we gain the assembler's knowledge of delay slots,
+ symbols, etc.
+ Would it be more efficient to use mask (id) here? */
+ if (itbl_have_entries
+ && (immed_expr = itbl_assemble (ip->insn_mo->name, "")))
+ {
+ s = ip->insn_mo->name;
+ s2 = "cop3";
+ coproc = ITBL_DECODE_PNUM (immed_expr);;
+ macro_build ((char *) NULL, &icnt, &immed_expr, s, "C");
+ return;
+ }
macro2 (ip);
return;
}
- if (mips_noat)
- as_warn ("Macro used $at after \".set noat\"");
+ if (mips_opts.noat)
+ as_warn (_("Macro used $at after \".set noat\""));
}
static void
int dbl = 0;
int coproc = 0;
int lr = 0;
+ int imm = 0;
int off;
offsetT maxnum;
bfd_reloc_code_real_type r;
macro_build ((char *) NULL, &icnt, NULL, "mflo", "d", dreg);
break;
+ case M_DMULO_I:
+ dbl = 1;
+ case M_MULO_I:
+ imm = 1;
+ goto do_mulo;
+
case M_DMULO:
dbl = 1;
case M_MULO:
+ do_mulo:
mips_emit_delays (true);
- ++mips_noreorder;
+ ++mips_opts.noreorder;
mips_any_noreorder = 1;
+ if (imm)
+ load_register (&icnt, AT, &imm_expr, dbl);
macro_build ((char *) NULL, &icnt, NULL,
dbl ? "dmult" : "mult",
- "s,t", sreg, treg);
+ "s,t", sreg, imm ? AT : treg);
macro_build ((char *) NULL, &icnt, NULL, "mflo", "d", dreg);
macro_build ((char *) NULL, &icnt, NULL,
dbl ? "dsra32" : "sra",
expr1.X_add_number = 8;
macro_build ((char *) NULL, &icnt, &expr1, "beq", "s,t,p", dreg, AT);
macro_build ((char *) NULL, &icnt, NULL, "nop", "", 0);
- macro_build ((char *) NULL, &icnt, NULL, "break", "c", 6);
+ macro_build ((char *) NULL, &icnt, NULL, "break", "c", 6);
}
- --mips_noreorder;
+ --mips_opts.noreorder;
macro_build ((char *) NULL, &icnt, NULL, "mflo", "d", dreg);
break;
+ case M_DMULOU_I:
+ dbl = 1;
+ case M_MULOU_I:
+ imm = 1;
+ goto do_mulou;
+
case M_DMULOU:
dbl = 1;
case M_MULOU:
+ do_mulou:
mips_emit_delays (true);
- ++mips_noreorder;
+ ++mips_opts.noreorder;
mips_any_noreorder = 1;
+ if (imm)
+ load_register (&icnt, AT, &imm_expr, dbl);
macro_build ((char *) NULL, &icnt, NULL,
dbl ? "dmultu" : "multu",
- "s,t", sreg, treg);
+ "s,t", sreg, imm ? AT : treg);
macro_build ((char *) NULL, &icnt, NULL, "mfhi", "d", AT);
macro_build ((char *) NULL, &icnt, NULL, "mflo", "d", dreg);
if (mips_trap)
expr1.X_add_number = 8;
macro_build ((char *) NULL, &icnt, &expr1, "beq", "s,t,p", AT, 0);
macro_build ((char *) NULL, &icnt, NULL, "nop", "", 0);
- macro_build ((char *) NULL, &icnt, NULL, "break", "c", 6);
+ macro_build ((char *) NULL, &icnt, NULL, "break", "c", 6);
}
- --mips_noreorder;
+ --mips_opts.noreorder;
break;
case M_ROL:
break;
case M_ROL_I:
+ if (imm_expr.X_op != O_constant)
+ as_bad (_("rotate count too large"));
macro_build ((char *) NULL, &icnt, NULL, "sll", "d,w,<", AT, sreg,
(int) (imm_expr.X_add_number & 0x1f));
macro_build ((char *) NULL, &icnt, NULL, "srl", "d,w,<", dreg, sreg,
break;
case M_ROR_I:
+ if (imm_expr.X_op != O_constant)
+ as_bad (_("rotate count too large"));
macro_build ((char *) NULL, &icnt, NULL, "srl", "d,w,<", AT, sreg,
(int) (imm_expr.X_add_number & 0x1f));
macro_build ((char *) NULL, &icnt, NULL, "sll", "d,w,<", dreg, sreg,
break;
case M_S_DOB:
- assert (mips_isa < 2);
+ if (mips_cpu == 4650)
+ {
+ as_bad (_("opcode not supported on this processor"));
+ return;
+ }
+ assert (mips_opts.isa == 1);
/* Even on a big endian machine $fn comes before $fn+1. We have
to adjust when storing to memory. */
macro_build ((char *) NULL, &icnt, &offset_expr, "swc1", "T,o(b)",
return;
case M_SEQ_I:
- if (imm_expr.X_add_number == 0)
+ if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
{
macro_build ((char *) NULL, &icnt, &expr1, "sltiu", "t,r,j", dreg,
sreg, (int) BFD_RELOC_LO16);
}
if (sreg == 0)
{
- as_warn ("Instruction %s: result is always false",
+ as_warn (_("Instruction %s: result is always false"),
ip->insn_mo->name);
macro_build ((char *) NULL, &icnt, NULL, "move", "d,s", dreg, 0);
return;
}
- if (imm_expr.X_add_number >= 0 && imm_expr.X_add_number < 0x10000)
+ if (imm_expr.X_op == O_constant
+ && imm_expr.X_add_number >= 0
+ && imm_expr.X_add_number < 0x10000)
{
macro_build ((char *) NULL, &icnt, &imm_expr, "xori", "t,r,i", dreg,
sreg, (int) BFD_RELOC_LO16);
used_at = 0;
}
- else if (imm_expr.X_add_number > -0x8000 && imm_expr.X_add_number < 0)
+ else if (imm_expr.X_op == O_constant
+ && imm_expr.X_add_number > -0x8000
+ && imm_expr.X_add_number < 0)
{
imm_expr.X_add_number = -imm_expr.X_add_number;
macro_build ((char *) NULL, &icnt, &imm_expr,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", dreg, sreg,
(int) BFD_RELOC_LO16);
used_at = 0;
case M_SGE_I: /* sreg >= I <==> not (sreg < I) */
case M_SGEU_I:
- if (imm_expr.X_add_number >= -0x8000 && imm_expr.X_add_number < 0x8000)
+ if (imm_expr.X_op == O_constant
+ && imm_expr.X_add_number >= -0x8000
+ && imm_expr.X_add_number < 0x8000)
{
- macro_build ((char *) NULL, &icnt, &expr1,
+ macro_build ((char *) NULL, &icnt, &imm_expr,
mask == M_SGE_I ? "slti" : "sltiu",
"t,r,j", dreg, sreg, (int) BFD_RELOC_LO16);
used_at = 0;
break;
case M_SLT_I:
- if (imm_expr.X_add_number >= -0x8000 && imm_expr.X_add_number < 0x8000)
+ if (imm_expr.X_op == O_constant
+ && imm_expr.X_add_number >= -0x8000
+ && imm_expr.X_add_number < 0x8000)
{
macro_build ((char *) NULL, &icnt, &imm_expr, "slti", "t,r,j",
dreg, sreg, (int) BFD_RELOC_LO16);
break;
case M_SLTU_I:
- if (imm_expr.X_add_number >= -0x8000 && imm_expr.X_add_number < 0x8000)
+ if (imm_expr.X_op == O_constant
+ && imm_expr.X_add_number >= -0x8000
+ && imm_expr.X_add_number < 0x8000)
{
macro_build ((char *) NULL, &icnt, &imm_expr, "sltiu", "t,r,j",
dreg, sreg, (int) BFD_RELOC_LO16);
return;
case M_SNE_I:
- if (imm_expr.X_add_number == 0)
+ if (imm_expr.X_op == O_constant && imm_expr.X_add_number == 0)
{
macro_build ((char *) NULL, &icnt, NULL, "sltu", "d,v,t", dreg, 0,
sreg);
}
if (sreg == 0)
{
- as_warn ("Instruction %s: result is always true",
+ as_warn (_("Instruction %s: result is always true"),
ip->insn_mo->name);
macro_build ((char *) NULL, &icnt, &expr1,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", dreg, 0, (int) BFD_RELOC_LO16);
return;
}
- if (imm_expr.X_add_number >= 0 && imm_expr.X_add_number < 0x10000)
+ if (imm_expr.X_op == O_constant
+ && imm_expr.X_add_number >= 0
+ && imm_expr.X_add_number < 0x10000)
{
macro_build ((char *) NULL, &icnt, &imm_expr, "xori", "t,r,i",
dreg, sreg, (int) BFD_RELOC_LO16);
used_at = 0;
}
- else if (imm_expr.X_add_number > -0x8000 && imm_expr.X_add_number < 0)
+ else if (imm_expr.X_op == O_constant
+ && imm_expr.X_add_number > -0x8000
+ && imm_expr.X_add_number < 0)
{
imm_expr.X_add_number = -imm_expr.X_add_number;
macro_build ((char *) NULL, &icnt, &imm_expr,
- mips_isa < 3 ? "addiu" : "daddiu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addiu" : "daddiu"),
"t,r,j", dreg, sreg, (int) BFD_RELOC_LO16);
used_at = 0;
}
case M_DSUB_I:
dbl = 1;
case M_SUB_I:
- if (imm_expr.X_add_number > -0x8000 && imm_expr.X_add_number <= 0x8000)
+ if (imm_expr.X_op == O_constant
+ && imm_expr.X_add_number > -0x8000
+ && imm_expr.X_add_number <= 0x8000)
{
imm_expr.X_add_number = -imm_expr.X_add_number;
macro_build ((char *) NULL, &icnt, &imm_expr,
case M_DSUBU_I:
dbl = 1;
case M_SUBU_I:
- if (imm_expr.X_add_number > -0x8000 && imm_expr.X_add_number <= 0x8000)
+ if (imm_expr.X_op == O_constant
+ && imm_expr.X_add_number > -0x8000
+ && imm_expr.X_add_number <= 0x8000)
{
imm_expr.X_add_number = -imm_expr.X_add_number;
macro_build ((char *) NULL, &icnt, &imm_expr,
macro_build ((char *) NULL, &icnt, NULL, s, "s,t", sreg, AT);
break;
- case M_TRUNCWD:
case M_TRUNCWS:
- assert (mips_isa < 2);
+ case M_TRUNCWD:
+ assert (mips_opts.isa == 1);
sreg = (ip->insn_opcode >> 11) & 0x1f; /* floating reg */
dreg = (ip->insn_opcode >> 06) & 0x1f; /* floating reg */
* or is there a reason for it?
*/
mips_emit_delays (true);
- ++mips_noreorder;
+ ++mips_opts.noreorder;
mips_any_noreorder = 1;
macro_build ((char *) NULL, &icnt, NULL, "cfc1", "t,G", treg, 31);
macro_build ((char *) NULL, &icnt, NULL, "cfc1", "t,G", treg, 31);
mask == M_TRUNCWD ? "cvt.w.d" : "cvt.w.s", "D,S", dreg, sreg);
macro_build ((char *) NULL, &icnt, NULL, "ctc1", "t,G", treg, 31);
macro_build ((char *) NULL, &icnt, NULL, "nop", "");
- --mips_noreorder;
+ --mips_opts.noreorder;
break;
case M_ULH:
s = "lbu";
ulh:
if (offset_expr.X_add_number >= 0x7fff)
- as_bad ("operand overflow");
+ as_bad (_("operand overflow"));
/* avoid load delay */
if (! target_big_endian)
offset_expr.X_add_number += 1;
off = 3;
ulw:
if (offset_expr.X_add_number >= 0x8000 - off)
- as_bad ("operand overflow");
+ as_bad (_("operand overflow"));
if (! target_big_endian)
offset_expr.X_add_number += off;
macro_build ((char *) NULL, &icnt, &offset_expr, s, "t,o(b)", treg,
load_address (&icnt, AT, &offset_expr);
if (breg != 0)
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", AT, AT, breg);
if (! target_big_endian)
expr1.X_add_number = off;
load_address (&icnt, AT, &offset_expr);
if (breg != 0)
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", AT, AT, breg);
if (target_big_endian)
expr1.X_add_number = 0;
case M_USH:
if (offset_expr.X_add_number >= 0x7fff)
- as_bad ("operand overflow");
+ as_bad (_("operand overflow"));
if (target_big_endian)
offset_expr.X_add_number += 1;
macro_build ((char *) NULL, &icnt, &offset_expr, "sb", "t,o(b)", treg,
off = 3;
usw:
if (offset_expr.X_add_number >= 0x8000 - off)
- as_bad ("operand overflow");
+ as_bad (_("operand overflow"));
if (! target_big_endian)
offset_expr.X_add_number += off;
macro_build ((char *) NULL, &icnt, &offset_expr, s, "t,o(b)", treg,
load_address (&icnt, AT, &offset_expr);
if (breg != 0)
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", AT, AT, breg);
if (! target_big_endian)
expr1.X_add_number = off;
load_address (&icnt, AT, &offset_expr);
if (breg != 0)
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", AT, AT, breg);
if (! target_big_endian)
expr1.X_add_number = 0;
break;
default:
- as_bad ("Macro %s not implemented yet", ip->insn_mo->name);
+ /* FIXME: Check if this is one of the itbl macros, since they
+ are added dynamically. */
+ as_bad (_("Macro %s not implemented yet"), ip->insn_mo->name);
break;
}
- if (mips_noat)
- as_warn ("Macro used $at after \".set noat\"");
+ if (mips_opts.noat)
+ as_warn (_("Macro used $at after \".set noat\""));
}
/* Implement macros in mips16 mode. */
s = "mfhi";
do_div3:
mips_emit_delays (true);
- ++mips_noreorder;
+ ++mips_opts.noreorder;
mips_any_noreorder = 1;
macro_build ((char *) NULL, &icnt, NULL,
dbl ? "ddiv" : "div",
"0,x,y", xreg, yreg);
expr1.X_add_number = 2;
macro_build ((char *) NULL, &icnt, &expr1, "bnez", "x,p", yreg);
- macro_build ((char *) NULL, &icnt, NULL, "break", "6", 7);
+ macro_build ((char *) NULL, &icnt, NULL, "break", "6", 7);
+
/* FIXME: The normal code checks for of -1 / -0x80000000 here,
since that causes an overflow. We should do that as well,
but I don't see how to do the comparisons without a temporary
register. */
- --mips_noreorder;
+ --mips_opts.noreorder;
macro_build ((char *) NULL, &icnt, NULL, s, "x", zreg);
break;
s2 = "mfhi";
do_divu3:
mips_emit_delays (true);
- ++mips_noreorder;
+ ++mips_opts.noreorder;
mips_any_noreorder = 1;
macro_build ((char *) NULL, &icnt, NULL, s, "0,x,y", xreg, yreg);
expr1.X_add_number = 2;
macro_build ((char *) NULL, &icnt, &expr1, "bnez", "x,p", yreg);
- macro_build ((char *) NULL, &icnt, NULL, "break", "6", 7);
- --mips_noreorder;
+ macro_build ((char *) NULL, &icnt, NULL, "break", "6", 7);
+ --mips_opts.noreorder;
macro_build ((char *) NULL, &icnt, NULL, s2, "x", zreg);
break;
+ case M_DMUL:
+ dbl = 1;
+ case M_MUL:
+ macro_build ((char *) NULL, &icnt, NULL,
+ dbl ? "dmultu" : "multu",
+ "x,y", xreg, yreg);
+ macro_build ((char *) NULL, &icnt, NULL, "mflo", "x", zreg);
+ return;
+
case M_DSUBU_I:
dbl = 1;
goto do_subu;
case M_SUBU_I:
do_subu:
+ if (imm_expr.X_op != O_constant)
+ as_bad (_("Unsupported large constant"));
imm_expr.X_add_number = -imm_expr.X_add_number;
macro_build ((char *) NULL, &icnt, &imm_expr,
dbl ? "daddiu" : "addiu",
break;
case M_SUBU_I_2:
+ if (imm_expr.X_op != O_constant)
+ as_bad (_("Unsupported large constant"));
imm_expr.X_add_number = -imm_expr.X_add_number;
macro_build ((char *) NULL, &icnt, &imm_expr, "addiu",
"x,k", xreg);
break;
case M_DSUBU_I_2:
+ if (imm_expr.X_op != O_constant)
+ as_bad (_("Unsupported large constant"));
imm_expr.X_add_number = -imm_expr.X_add_number;
macro_build ((char *) NULL, &icnt, &imm_expr, "daddiu",
"y,j", yreg);
s3 = "x,8";
do_addone_branch_i:
+ if (imm_expr.X_op != O_constant)
+ as_bad (_("Unsupported large constant"));
++imm_expr.X_add_number;
do_branch_i:
}
}
+/* For consistency checking, verify that all bits are specified either
+ by the match/mask part of the instruction definition, or by the
+ operand list. */
+static int
+validate_mips_insn (opc)
+ const struct mips_opcode *opc;
+{
+ const char *p = opc->args;
+ char c;
+ unsigned long used_bits = opc->mask;
+
+ if ((used_bits & opc->match) != opc->match)
+ {
+ as_bad (_("internal: bad mips opcode (mask error): %s %s"),
+ opc->name, opc->args);
+ return 0;
+ }
+#define USE_BITS(mask,shift) (used_bits |= ((mask) << (shift)))
+ while (*p)
+ switch (c = *p++)
+ {
+ case ',': break;
+ case '(': break;
+ case ')': break;
+ case '<': USE_BITS (OP_MASK_SHAMT, OP_SH_SHAMT); break;
+ case '>': USE_BITS (OP_MASK_SHAMT, OP_SH_SHAMT); break;
+ case 'A': break;
+ case 'B': USE_BITS (OP_MASK_SYSCALL, OP_SH_SYSCALL); break;
+ case 'C': USE_BITS (OP_MASK_COPZ, OP_SH_COPZ); break;
+ case 'D': USE_BITS (OP_MASK_FD, OP_SH_FD); break;
+ case 'E': USE_BITS (OP_MASK_RT, OP_SH_RT); break;
+ case 'F': break;
+ case 'G': USE_BITS (OP_MASK_RD, OP_SH_RD); break;
+ case 'I': break;
+ case 'L': break;
+ case 'M': USE_BITS (OP_MASK_CCC, OP_SH_CCC); break;
+ case 'N': USE_BITS (OP_MASK_BCC, OP_SH_BCC); break;
+ case 'R': USE_BITS (OP_MASK_FR, OP_SH_FR); break;
+ case 'S': USE_BITS (OP_MASK_FS, OP_SH_FS); break;
+ case 'T': USE_BITS (OP_MASK_FT, OP_SH_FT); break;
+ case 'V': USE_BITS (OP_MASK_FS, OP_SH_FS); break;
+ case 'W': USE_BITS (OP_MASK_FT, OP_SH_FT); break;
+ case 'a': USE_BITS (OP_MASK_TARGET, OP_SH_TARGET); break;
+ case 'b': USE_BITS (OP_MASK_RS, OP_SH_RS); break;
+ case 'c': USE_BITS (OP_MASK_CODE, OP_SH_CODE); break;
+ case 'd': USE_BITS (OP_MASK_RD, OP_SH_RD); break;
+ case 'f': break;
+ case 'h': USE_BITS (OP_MASK_PREFX, OP_SH_PREFX); break;
+ case 'i': USE_BITS (OP_MASK_IMMEDIATE, OP_SH_IMMEDIATE); break;
+ case 'j': USE_BITS (OP_MASK_DELTA, OP_SH_DELTA); break;
+ case 'k': USE_BITS (OP_MASK_CACHE, OP_SH_CACHE); break;
+ case 'l': break;
+ case 'o': USE_BITS (OP_MASK_DELTA, OP_SH_DELTA); break;
+ case 'p': USE_BITS (OP_MASK_DELTA, OP_SH_DELTA); break;
+ case 'q': USE_BITS (OP_MASK_CODE2, OP_SH_CODE2); break;
+ case 'r': USE_BITS (OP_MASK_RS, OP_SH_RS); break;
+ case 's': USE_BITS (OP_MASK_RS, OP_SH_RS); break;
+ case 't': USE_BITS (OP_MASK_RT, OP_SH_RT); break;
+ case 'u': USE_BITS (OP_MASK_IMMEDIATE, OP_SH_IMMEDIATE); break;
+ case 'v': USE_BITS (OP_MASK_RS, OP_SH_RS); break;
+ case 'w': USE_BITS (OP_MASK_RT, OP_SH_RT); break;
+ case 'x': break;
+ case 'z': break;
+ case 'P': USE_BITS (OP_MASK_PERFREG, OP_SH_PERFREG); break;
+ default:
+ as_bad (_("internal: bad mips opcode (unknown operand type `%c'): %s %s"),
+ c, opc->name, opc->args);
+ return 0;
+ }
+#undef USE_BITS
+ if (used_bits != 0xffffffff)
+ {
+ as_bad (_("internal: bad mips opcode (bits 0x%lx undefined): %s %s"),
+ ~used_bits & 0xffffffff, opc->name, opc->args);
+ return 0;
+ }
+ return 1;
+}
+
/* This routine assembles an instruction into its binary format. As a
side effect, it sets one of the global variables imm_reloc or
offset_reloc to the type of relocation to do if one of the operands
{
char *s;
const char *args;
- char c;
+ char c = 0;
struct mips_opcode *insn;
char *argsStart;
unsigned int regno;
unsigned int lastregno = 0;
char *s_reset;
+ char save_c = 0;
+ int full_opcode_match = 1;
insn_error = NULL;
- for (s = str; islower (*s) || (*s >= '0' && *s <= '3') || *s == '6' || *s == '.'; ++s)
+ /* If the instruction contains a '.', we first try to match an instruction
+ including the '.'. Then we try again without the '.'. */
+ insn = NULL;
+ for (s = str; *s != '\0' && !isspace ((unsigned char) *s); ++s)
continue;
- switch (*s)
- {
- case '\0':
- break;
- case ' ':
+ /* If we stopped on whitespace, then replace the whitespace with null for
+ the call to hash_find. Save the character we replaced just in case we
+ have to re-parse the instruction. */
+ if (isspace ((unsigned char) *s))
+ {
+ save_c = *s;
*s++ = '\0';
- break;
-
- default:
- as_fatal ("Unknown opcode: `%s'", str);
}
- if ((insn = (struct mips_opcode *) hash_find (op_hash, str)) == NULL)
+
+ insn = (struct mips_opcode *) hash_find (op_hash, str);
+
+ /* If we didn't find the instruction in the opcode table, try again, but
+ this time with just the instruction up to, but not including the
+ first '.'. */
+ if (insn == NULL)
{
- insn_error = "unrecognized opcode";
- return;
+ /* Restore the character we overwrite above (if any). */
+ if (save_c)
+ *(--s) = save_c;
+
+ /* Scan up to the first '.' or whitespace. */
+ for (s = str; *s != '\0' && *s != '.' && !isspace ((unsigned char) *s); ++s)
+ continue;
+
+ /* If we did not find a '.', then we can quit now. */
+ if (*s != '.')
+ {
+ insn_error = "unrecognized opcode";
+ return;
+ }
+
+ /* Lookup the instruction in the hash table. */
+ *s++ = '\0';
+ if ((insn = (struct mips_opcode *) hash_find (op_hash, str)) == NULL)
+ {
+ insn_error = "unrecognized opcode";
+ return;
+ }
+
+ full_opcode_match = 0;
}
+
argsStart = s;
for (;;)
{
- int insn_isa;
+ boolean ok;
assert (strcmp (insn->name, str) == 0);
- if (insn->pinfo == INSN_MACRO)
- insn_isa = insn->match;
- else if ((insn->pinfo & INSN_ISA) == INSN_ISA2)
- insn_isa = 2;
- else if ((insn->pinfo & INSN_ISA) == INSN_ISA3)
- insn_isa = 3;
- else if ((insn->pinfo & INSN_ISA) == INSN_ISA4)
- insn_isa = 4;
- else
- insn_isa = 1;
+ if (OPCODE_IS_MEMBER (insn, mips_opts.isa, mips_cpu, mips_gp32))
+ ok = true;
+ else
+ ok = false;
+
+ if (insn->pinfo != INSN_MACRO)
+ {
+ if (mips_cpu == 4650 && (insn->pinfo & FP_D) != 0)
+ ok = false;
+ }
- if (insn_isa > mips_isa
- || ((insn->pinfo & INSN_ISA) == INSN_4650
- && ! mips_4650)
- || ((insn->pinfo & INSN_ISA) == INSN_4010
- && ! mips_4010)
- || ((insn->pinfo & INSN_ISA) == INSN_4100
- && ! mips_4100))
+ if (! ok)
{
if (insn + 1 < &mips_opcodes[NUMOPCODES]
&& strcmp (insn->name, insn[1].name) == 0)
++insn;
continue;
}
- if (insn_isa <= mips_isa)
- insn_error = "opcode not supported on this processor";
else
- {
+ {
static char buf[100];
-
- sprintf (buf, "opcode requires -mips%d or greater", insn_isa);
+ sprintf (buf,
+ _("opcode not supported on this processor: %d (MIPS%d)"),
+ mips_cpu, mips_opts.isa);
+
insn_error = buf;
+ return;
}
- return;
}
ip->insn_mo = insn;
break;
case '(':
- /* handle optional base register.
+ /* Handle optional base register.
Either the base register is omitted or
we must have a left paren. */
- /* this is dependent on the next operand specifier
- is a 'b' for base register */
- assert (args[1] == 'b');
+ /* This is dependent on the next operand specifier
+ is a base register specification. */
+ assert (args[1] == 'b' || args[1] == '5'
+ || args[1] == '-' || args[1] == '4');
if (*s == '\0')
return;
check_absolute_expr (ip, &imm_expr);
if ((unsigned long) imm_expr.X_add_number > 31)
{
- as_warn ("Improper shift amount (%ld)",
+ as_warn (_("Improper shift amount (%ld)"),
(long) imm_expr.X_add_number);
imm_expr.X_add_number = imm_expr.X_add_number & 0x1f;
}
s = expr_end;
continue;
+
case 'k': /* cache code */
case 'h': /* prefx code */
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
if ((unsigned long) imm_expr.X_add_number > 31)
{
- as_warn ("Invalid value for `%s' (%lu)",
+ as_warn (_("Invalid value for `%s' (%lu)"),
ip->insn_mo->name,
(unsigned long) imm_expr.X_add_number);
imm_expr.X_add_number &= 0x1f;
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
if ((unsigned) imm_expr.X_add_number > 1023)
- as_warn ("Illegal break code (%ld)",
- (long) imm_expr.X_add_number);
+ {
+ as_warn (_("Illegal break code (%ld)"),
+ (long) imm_expr.X_add_number);
+ imm_expr.X_add_number &= 0x3ff;
+ }
ip->insn_opcode |= imm_expr.X_add_number << 16;
imm_expr.X_op = O_absent;
s = expr_end;
continue;
+ case 'q': /* lower break code */
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ if ((unsigned) imm_expr.X_add_number > 1023)
+ {
+ as_warn (_("Illegal lower break code (%ld)"),
+ (long) imm_expr.X_add_number);
+ imm_expr.X_add_number &= 0x3ff;
+ }
+ ip->insn_opcode |= imm_expr.X_add_number << 6;
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ continue;
+
case 'B': /* syscall code */
my_getExpression (&imm_expr, s);
check_absolute_expr (ip, &imm_expr);
if ((unsigned) imm_expr.X_add_number > 0xfffff)
- as_warn ("Illegal syscall code (%ld)",
+ as_warn (_("Illegal syscall code (%ld)"),
(long) imm_expr.X_add_number);
ip->insn_opcode |= imm_expr.X_add_number << 6;
imm_expr.X_op = O_absent;
check_absolute_expr (ip, &imm_expr);
if ((unsigned long) imm_expr.X_add_number >= (1<<25))
{
- as_warn ("Coproccesor code > 25 bits (%ld)",
+ as_warn (_("Coproccesor code > 25 bits (%ld)"),
(long) imm_expr.X_add_number);
imm_expr.X_add_number &= ((1<<25) - 1);
}
s = expr_end;
continue;
+ case 'P': /* Performance register */
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ if (imm_expr.X_add_number != 0 && imm_expr.X_add_number != 1)
+ {
+ as_warn (_("Invalidate performance regster (%ld)"),
+ (long) imm_expr.X_add_number);
+ imm_expr.X_add_number &= 1;
+ }
+ ip->insn_opcode |= (imm_expr.X_add_number << 1);
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ continue;
+
case 'b': /* base register */
case 'd': /* destination register */
case 's': /* source register */
s_reset = s;
if (s[0] == '$')
{
- if (isdigit (s[1]))
+
+ if (isdigit ((unsigned char) s[1]))
{
++s;
regno = 0;
regno += *s - '0';
++s;
}
- while (isdigit (*s));
+ while (isdigit ((unsigned char) *s));
if (regno > 31)
- as_bad ("Invalid register number (%d)", regno);
+ as_bad (_("Invalid register number (%d)"), regno);
}
else if (*args == 'E' || *args == 'G')
goto notreg;
s += 4;
regno = KT1;
}
+ else if (itbl_have_entries)
+ {
+ char *p, *n;
+ unsigned long r;
+
+ p = s + 1; /* advance past '$' */
+ n = itbl_get_field (&p); /* n is name */
+
+ /* See if this is a register defined in an
+ itbl entry. */
+ if (itbl_get_reg_val (n, &r))
+ {
+ /* Get_field advances to the start of
+ the next field, so we need to back
+ rack to the end of the last field. */
+ if (p)
+ s = p - 1;
+ else
+ s = strchr (s, '\0');
+ regno = r;
+ }
+ else
+ goto notreg;
+ }
else
goto notreg;
}
if (regno == AT
- && ! mips_noat
+ && ! mips_opts.noat
&& *args != 'E'
&& *args != 'G')
- as_warn ("Used $at without \".set noat\"");
+ as_warn (_("Used $at without \".set noat\""));
c = *args;
if (*s == ' ')
s++;
/* 'z' only matches $0. */
if (c == 'z' && regno != 0)
break;
+
+ /* Now that we have assembled one operand, we use the args string
+ * to figure out where it goes in the instruction. */
switch (c)
{
case 'r':
is $0. This only matches $0, and is checked
outside the switch. */
break;
+ case 'D':
+ /* Itbl operand; not yet implemented. FIXME ?? */
+ break;
+ /* What about all other operands like 'i', which
+ can be specified in the opcode table? */
}
lastregno = regno;
continue;
case 'V':
case 'W':
s_reset = s;
- if (s[0] == '$' && s[1] == 'f' && isdigit (s[2]))
+ if (s[0] == '$' && s[1] == 'f' && isdigit ((unsigned char) s[2]))
{
s += 2;
regno = 0;
regno += *s - '0';
++s;
}
- while (isdigit (*s));
+ while (isdigit ((unsigned char) *s));
if (regno > 31)
- as_bad ("Invalid float register number (%d)", regno);
+ as_bad (_("Invalid float register number (%d)"), regno);
if ((regno & 1) != 0
- && mips_isa < 3
+ && ! ISA_HAS_64BIT_REGS (mips_opts.isa)
&& ! (strcmp (str, "mtc1") == 0
|| strcmp (str, "mfc1") == 0
|| strcmp (str, "lwc1") == 0
|| strcmp (str, "swc1") == 0
|| strcmp (str, "l.s") == 0
|| strcmp (str, "s.s") == 0))
- as_warn ("Float register should be even, was %d",
+ as_warn (_("Float register should be even, was %d"),
regno);
c = *args;
lastregno = regno;
continue;
}
+
+
switch (*args++)
{
case 'V':
my_getExpression (&imm_expr, s);
if (imm_expr.X_op != O_big
&& imm_expr.X_op != O_constant)
- insn_error = "absolute expression required";
+ insn_error = _("absolute expression required");
s = expr_end;
continue;
input_line_pointer = save_in;
if (err != NULL && *err != '\0')
{
- as_bad ("Bad floating point constant: %s", err);
+ as_bad (_("Bad floating point constant: %s"), err);
memset (temp, '\0', sizeof temp);
length = f64 ? 8 : 4;
}
|| (*args == 'l'
&& (! USE_GLOBAL_POINTER_OPT
|| mips_pic == EMBEDDED_PIC
- || g_switch_value < 4)
- ))
+ || g_switch_value < 4
+ || (temp[0] == 0 && temp[1] == 0)
+ || (temp[2] == 0 && temp[3] == 0))))
{
imm_expr.X_op = O_constant;
if (! target_big_endian)
- imm_expr.X_add_number =
- (((((((int) temp[3] << 8)
- | temp[2]) << 8)
- | temp[1]) << 8)
- | temp[0]);
+ imm_expr.X_add_number = bfd_getl32 (temp);
+ else
+ imm_expr.X_add_number = bfd_getb32 (temp);
+ }
+ else if (length > 4
+ && ((temp[0] == 0 && temp[1] == 0)
+ || (temp[2] == 0 && temp[3] == 0))
+ && ((temp[4] == 0 && temp[5] == 0)
+ || (temp[6] == 0 && temp[7] == 0)))
+ {
+ /* The value is simple enough to load with a
+ couple of instructions. In mips1 mode, set
+ imm_expr to the high order 32 bits and
+ offset_expr to the low order 32 bits.
+ Otherwise, set imm_expr to the entire 64 bit
+ constant. */
+ if (! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ {
+ imm_expr.X_op = O_constant;
+ offset_expr.X_op = O_constant;
+ if (! target_big_endian)
+ {
+ imm_expr.X_add_number = bfd_getl32 (temp + 4);
+ offset_expr.X_add_number = bfd_getl32 (temp);
+ }
+ else
+ {
+ imm_expr.X_add_number = bfd_getb32 (temp);
+ offset_expr.X_add_number = bfd_getb32 (temp + 4);
+ }
+ if (offset_expr.X_add_number == 0)
+ offset_expr.X_op = O_absent;
+ }
+ else if (sizeof (imm_expr.X_add_number) > 4)
+ {
+ imm_expr.X_op = O_constant;
+ if (! target_big_endian)
+ imm_expr.X_add_number = bfd_getl64 (temp);
+ else
+ imm_expr.X_add_number = bfd_getb64 (temp);
+ }
else
- imm_expr.X_add_number =
- (((((((int) temp[0] << 8)
- | temp[1]) << 8)
- | temp[2]) << 8)
- | temp[3]);
+ {
+ imm_expr.X_op = O_big;
+ imm_expr.X_add_number = 4;
+ if (! target_big_endian)
+ {
+ generic_bignum[0] = bfd_getl16 (temp);
+ generic_bignum[1] = bfd_getl16 (temp + 2);
+ generic_bignum[2] = bfd_getl16 (temp + 4);
+ generic_bignum[3] = bfd_getl16 (temp + 6);
+ }
+ else
+ {
+ generic_bignum[0] = bfd_getb16 (temp + 6);
+ generic_bignum[1] = bfd_getb16 (temp + 4);
+ generic_bignum[2] = bfd_getb16 (temp + 2);
+ generic_bignum[3] = bfd_getb16 (temp);
+ }
+ }
}
else
{
default: /* unused default case avoids warnings. */
case 'L':
newname = RDATA_SECTION_NAME;
- if (USE_GLOBAL_POINTER_OPT && g_switch_value >= 8)
+ if ((USE_GLOBAL_POINTER_OPT && g_switch_value >= 8)
+ || mips_pic == EMBEDDED_PIC)
newname = ".lit8";
break;
case 'F':
- newname = RDATA_SECTION_NAME;
+ if (mips_pic == EMBEDDED_PIC)
+ newname = ".lit8";
+ else
+ newname = RDATA_SECTION_NAME;
break;
case 'l':
assert (!USE_GLOBAL_POINTER_OPT
| SEC_LOAD
| SEC_READONLY
| SEC_DATA));
- frag_align (*args == 'l' ? 2 : 3, 0);
- if (OUTPUT_FLAVOR == bfd_target_elf_flavour)
+ frag_align (*args == 'l' ? 2 : 3, 0, 0);
+ if (OUTPUT_FLAVOR == bfd_target_elf_flavour
+ && strcmp (TARGET_OS, "elf") != 0)
record_alignment (new_seg, 4);
else
record_alignment (new_seg, *args == 'l' ? 2 : 3);
if (seg == now_seg)
- as_bad ("Can't use floating point insn in this section");
+ as_bad (_("Can't use floating point insn in this section"));
/* Set the argument to the current address in the
section. */
else
imm_reloc = BFD_RELOC_HI16;
}
+ else if (imm_expr.X_op == O_constant)
+ imm_expr.X_add_number &= 0xffff;
}
if (*args == 'i')
{
break;
if (imm_expr.X_op != O_constant
&& imm_expr.X_op != O_big)
- insn_error = "absolute expression required";
+ insn_error = _("absolute expression required");
else
- as_bad ("16 bit expression not in range 0..65535");
+ as_bad (_("16 bit expression not in range 0..65535"));
}
}
else
&& imm_expr.X_op == O_constant)
|| (more
&& imm_expr.X_add_number < 0
- && mips_isa >= 3
+ && ISA_HAS_64BIT_REGS (mips_opts.isa)
&& imm_expr.X_unsigned
&& sizeof (imm_expr.X_add_number) <= 4))
{
break;
if (imm_expr.X_op != O_constant
&& imm_expr.X_op != O_big)
- insn_error = "absolute expression required";
+ insn_error = _("absolute expression required");
else
- as_bad ("16 bit expression not in range -32768..32767");
+ as_bad (_("16 bit expression not in range -32768..32767"));
}
}
s = expr_end;
|| offset_expr.X_add_number < -0x8000)
&& (mips_pic != EMBEDDED_PIC
|| offset_expr.X_op != O_subtract
- || now_seg != text_section
|| (S_GET_SEGMENT (offset_expr.X_op_symbol)
- != text_section)))
+ != now_seg)))
break;
- offset_reloc = BFD_RELOC_LO16;
if (c == 'h' || c == 'H')
{
- assert (offset_expr.X_op == O_constant);
+ if (offset_expr.X_op != O_constant)
+ break;
offset_expr.X_add_number =
(offset_expr.X_add_number >> 16) & 0xffff;
}
+ offset_reloc = BFD_RELOC_LO16;
s = expr_end;
continue;
case 'u': /* upper 16 bits */
c = my_getSmallExpression (&imm_expr, s);
- if (imm_expr.X_op == O_constant
- && (imm_expr.X_add_number < 0
- || imm_expr.X_add_number >= 0x10000))
- as_bad ("lui expression not in range 0..65535");
imm_reloc = BFD_RELOC_LO16;
if (c)
{
else
imm_reloc = BFD_RELOC_HI16;
}
+ else if (imm_expr.X_op == O_constant)
+ imm_expr.X_add_number &= 0xffff;
}
+ if (imm_expr.X_op == O_constant
+ && (imm_expr.X_add_number < 0
+ || imm_expr.X_add_number >= 0x10000))
+ as_bad (_("lui expression not in range 0..65535"));
s = expr_end;
continue;
regno += *s - '0';
++s;
}
- while (isdigit (*s));
+ while (isdigit ((unsigned char) *s));
if (regno > 7)
- as_bad ("invalid condition code register $fcc%d", regno);
+ as_bad (_("invalid condition code register $fcc%d"), regno);
if (*args == 'N')
ip->insn_opcode |= regno << OP_SH_BCC;
else
continue;
default:
- fprintf (stderr, "bad char = '%c'\n", *args);
+ as_bad (_("bad char = '%c'\n"), *args);
internalError ();
}
break;
s = argsStart;
continue;
}
- insn_error = "illegal operands";
+ insn_error = _("illegal operands");
return;
}
}
mips16_small = false;
mips16_ext = false;
- for (s = str; islower (*s); ++s)
+ for (s = str; islower ((unsigned char) *s); ++s)
;
switch (*s)
{
}
/* Fall through. */
default:
- insn_error = "unknown opcode";
+ insn_error = _("unknown opcode");
return;
}
- if (! mips16_autoextend && ! mips16_ext)
+ if (mips_opts.noautoextend && ! mips16_ext)
mips16_small = true;
if ((insn = (struct mips_opcode *) hash_find (mips16_op_hash, str)) == NULL)
{
- insn_error = "unrecognized opcode";
+ insn_error = _("unrecognized opcode");
return;
}
if (s[0] != '$')
break;
s_reset = s;
- if (isdigit (s[1]))
+ if (isdigit ((unsigned char) s[1]))
{
++s;
regno = 0;
regno += *s - '0';
++s;
}
- while (isdigit (*s));
+ while (isdigit ((unsigned char) *s));
if (regno > 31)
{
- as_bad ("invalid register number (%d)", regno);
+ as_bad (_("invalid register number (%d)"), regno);
regno = 2;
}
}
case 'X':
case 'Y':
- if (regno == AT && ! mips_noat)
- as_warn ("used $at without \".set noat\"");
+ if (regno == AT && ! mips_opts.noat)
+ as_warn (_("used $at without \".set noat\""));
break;
default:
case 'U':
case 'k':
case 'K':
- if (s[0] == '$' && isdigit (s[1]))
+ if (s[0] == '%'
+ && strncmp (s + 1, "gprel(", sizeof "gprel(" - 1) == 0)
{
- /* Looks like a register name. */
- break;
+ /* This is %gprel(SYMBOL). We need to read SYMBOL,
+ and generate the appropriate reloc. If the text
+ inside %gprel is not a symbol name with an
+ optional offset, then we generate a normal reloc
+ and will probably fail later. */
+ my_getExpression (&imm_expr, s + sizeof "%gprel" - 1);
+ if (imm_expr.X_op == O_symbol)
+ {
+ mips16_ext = true;
+ imm_reloc = BFD_RELOC_MIPS16_GPREL;
+ s = expr_end;
+ ip->use_extend = true;
+ ip->extend = 0;
+ continue;
+ }
+ }
+ else
+ {
+ /* Just pick up a normal expression. */
+ my_getExpression (&imm_expr, s);
}
- if (s[0] == '('
- && args[1] == '('
- && s[1] == '$')
+ if (imm_expr.X_op == O_register)
{
- /* It looks like the expression was omitted before a
- register indirection, which means that the
- expression is implicitly zero. We still set up
- imm_expr, so that we handle explicit extensions
- correctly. */
- imm_expr.X_op = O_constant;
- imm_expr.X_add_number = 0;
- imm_reloc = (int) BFD_RELOC_UNUSED + c;
- continue;
+ /* What we thought was an expression turned out to
+ be a register. */
+
+ if (s[0] == '(' && args[1] == '(')
+ {
+ /* It looks like the expression was omitted
+ before a register indirection, which means
+ that the expression is implicitly zero. We
+ still set up imm_expr, so that we handle
+ explicit extensions correctly. */
+ imm_expr.X_op = O_constant;
+ imm_expr.X_add_number = 0;
+ imm_reloc = (int) BFD_RELOC_UNUSED + c;
+ continue;
+ }
+
+ break;
}
- my_getExpression (&imm_expr, s);
/* We need to relax this instruction. */
imm_reloc = (int) BFD_RELOC_UNUSED + c;
s = expr_end;
/* We use offset_reloc rather than imm_reloc for the PC
relative operands. This lets macros with both
immediate and address operands work correctly. */
- if (s[0] == '$' && isdigit (s[1]))
- {
- /* Looks like a register name. */
- break;
- }
my_getExpression (&offset_expr, s);
+
+ if (offset_expr.X_op == O_register)
+ break;
+
/* We need to relax this instruction. */
offset_reloc = (int) BFD_RELOC_UNUSED + c;
s = expr_end;
check_absolute_expr (ip, &imm_expr);
if ((unsigned long) imm_expr.X_add_number > 63)
{
- as_warn ("Invalid value for `%s' (%lu)",
+ as_warn (_("Invalid value for `%s' (%lu)"),
ip->insn_mo->name,
(unsigned long) imm_expr.X_add_number);
imm_expr.X_add_number &= 0x3f;
++s;
if (*s != '$')
{
- as_bad ("can't parse register list");
+ as_bad (_("can't parse register list"));
break;
}
++s;
++s;
}
reg1 = 0;
- while (isdigit (*s))
+ while (isdigit ((unsigned char) *s))
{
reg1 *= 10;
reg1 += *s - '0';
++s;
else
{
- as_bad ("invalid register list");
+ as_bad (_("invalid register list"));
break;
}
}
reg2 = 0;
- while (isdigit (*s))
+ while (isdigit ((unsigned char) *s))
{
reg2 *= 10;
reg2 += *s - '0';
mask |= 1;
else
{
- as_bad ("invalid register list");
+ as_bad (_("invalid register list"));
break;
}
}
}
continue;
+ case 'e': /* extend code */
+ my_getExpression (&imm_expr, s);
+ check_absolute_expr (ip, &imm_expr);
+ if ((unsigned long) imm_expr.X_add_number > 0x7ff)
+ {
+ as_warn (_("Invalid value for `%s' (%lu)"),
+ ip->insn_mo->name,
+ (unsigned long) imm_expr.X_add_number);
+ imm_expr.X_add_number &= 0x7ff;
+ }
+ ip->insn_opcode |= imm_expr.X_add_number;
+ imm_expr.X_op = O_absent;
+ s = expr_end;
+ continue;
+
default:
internalError ();
}
continue;
}
- insn_error = "illegal operands";
+ insn_error = _("illegal operands");
return;
}
needext = false;
if (warn && ext && ! needext)
- as_warn_where (file, line, "extended operand requested but not required");
+ as_warn_where (file, line, _("extended operand requested but not required"));
if (small && needext)
- as_bad_where (file, line, "invalid unextended operand value");
+ as_bad_where (file, line, _("invalid unextended operand value"));
if (small || (! ext && ! needext))
{
}
if (val < minext || val > maxext)
as_bad_where (file, line,
- "operand value out of range for instruction");
+ _("operand value out of range for instruction"));
*use_extend = true;
if (op->extbits == 16)
;
if (sp - 4 >= str && sp[-1] == RP)
{
- if (isdigit (sp[-2]))
+ if (isdigit ((unsigned char) sp[-2]))
{
- for (sp -= 3; sp >= str && isdigit (*sp); sp--)
+ for (sp -= 3; sp >= str && isdigit ((unsigned char) *sp); sp--)
;
if (*sp == '$' && sp > str && sp[-1] == LP)
{
expression (ep);
expr_end = input_line_pointer;
input_line_pointer = save_in;
+
+ /* If we are in mips16 mode, and this is an expression based on `.',
+ then we bump the value of the symbol by 1 since that is how other
+ text symbols are handled. We don't bother to handle complex
+ expressions, just `.' plus or minus a constant. */
+ if (mips_opts.mips16
+ && ep->X_op == O_symbol
+ && strcmp (S_GET_NAME (ep->X_add_symbol), FAKE_LABEL_NAME) == 0
+ && S_GET_SEGMENT (ep->X_add_symbol) == now_seg
+ && symbol_get_frag (ep->X_add_symbol) == frag_now
+ && symbol_constant_p (ep->X_add_symbol)
+ && S_GET_VALUE (ep->X_add_symbol) == frag_now_fix ())
+ S_SET_VALUE (ep->X_add_symbol, S_GET_VALUE (ep->X_add_symbol) + 1);
}
/* Turn a string in input_line_pointer into a floating point constant
default:
*sizeP = 0;
- return "bad call to md_atof";
+ return _("bad call to md_atof");
}
t = atof_ieee (input_line_pointer, type, words);
{"mips16", no_argument, NULL, OPTION_MIPS16},
#define OPTION_NO_MIPS16 (OPTION_MD_BASE + 23)
{"no-mips16", no_argument, NULL, OPTION_NO_MIPS16},
+#define OPTION_M3900 (OPTION_MD_BASE + 26)
+ {"m3900", no_argument, NULL, OPTION_M3900},
+#define OPTION_NO_M3900 (OPTION_MD_BASE + 27)
+ {"no-m3900", no_argument, NULL, OPTION_NO_M3900},
+
+
+#define OPTION_MABI (OPTION_MD_BASE + 38)
+ {"mabi", required_argument, NULL, OPTION_MABI},
+
+#define OPTION_M7000_HILO_FIX (OPTION_MD_BASE + 39)
+ {"mfix7000", no_argument, NULL, OPTION_M7000_HILO_FIX},
+#define OPTION_NO_M7000_HILO_FIX (OPTION_MD_BASE + 40)
+ {"no-fix-7000", no_argument, NULL, OPTION_NO_M7000_HILO_FIX},
#define OPTION_CALL_SHARED (OPTION_MD_BASE + 7)
#define OPTION_NON_SHARED (OPTION_MD_BASE + 8)
{"64", no_argument, NULL, OPTION_64},
#endif
+#define OPTION_GP32 (OPTION_MD_BASE + 41)
+#define OPTION_GP64 (OPTION_MD_BASE + 42)
+ {"mgp32", no_argument, NULL, OPTION_GP32},
+ {"mgp64", no_argument, NULL, OPTION_GP64},
+
{NULL, no_argument, NULL, 0}
};
size_t md_longopts_size = sizeof(md_longopts);
optimizations which limit full symbolic debugging. We take
that to be equivalent to -O0. */
if (mips_debug == 2)
- mips_optimize = 0;
+ mips_optimize = 1;
break;
case OPTION_MIPS1:
- mips_isa = 1;
- if (mips_cpu == -1)
- mips_cpu = 3000;
+ mips_opts.isa = 1;
break;
case OPTION_MIPS2:
- mips_isa = 2;
- if (mips_cpu == -1)
- mips_cpu = 6000;
+ mips_opts.isa = 2;
break;
case OPTION_MIPS3:
- mips_isa = 3;
- if (mips_cpu == -1)
- mips_cpu = 4000;
+ mips_opts.isa = 3;
break;
case OPTION_MIPS4:
- mips_isa = 4;
- if (mips_cpu == -1)
- mips_cpu = 8000;
+ mips_opts.isa = 4;
break;
case OPTION_MCPU:
|| strcmp (p, "3k") == 0
|| strcmp (p, "3K") == 0)
mips_cpu = 3000;
+ else if (strcmp (p, "3900") == 0)
+ mips_cpu = 3900;
break;
case '4':
|| strcmp (p, "4K") == 0)
mips_cpu = 4000;
else if (strcmp (p, "4100") == 0)
- {
mips_cpu = 4100;
- if (mips_4100 < 0)
- mips_4100 = 1;
- }
+ else if (strcmp (p, "4111") == 0)
+ mips_cpu = 4111;
else if (strcmp (p, "4300") == 0)
mips_cpu = 4300;
else if (strcmp (p, "4400") == 0)
else if (strcmp (p, "4600") == 0)
mips_cpu = 4600;
else if (strcmp (p, "4650") == 0)
- {
mips_cpu = 4650;
- if (mips_4650 < 0)
- mips_4650 = 1;
- }
else if (strcmp (p, "4010") == 0)
- {
- mips_cpu = 4010;
- if (mips_4010 < 0)
- mips_4010 = 1;
- }
+ mips_cpu = 4010;
break;
case '5':
break;
}
- if (sv && mips_cpu != 4300 && mips_cpu != 4100 && mips_cpu != 5000)
+ if (sv
+ && (mips_cpu != 4300
+ && mips_cpu != 4100
+ && mips_cpu != 4111
+ && mips_cpu != 5000))
{
- as_bad ("ignoring invalid leading 'v' in -mcpu=%s switch", arg);
+ as_bad (_("ignoring invalid leading 'v' in -mcpu=%s switch"), arg);
return 0;
}
if (mips_cpu == -1)
{
- as_bad ("invalid architecture -mcpu=%s", arg);
+ as_bad (_("invalid architecture -mcpu=%s"), arg);
return 0;
}
}
break;
case OPTION_M4650:
- mips_4650 = 1;
+ mips_cpu = 4650;
break;
case OPTION_NO_M4650:
- mips_4650 = 0;
break;
case OPTION_M4010:
- mips_4010 = 1;
+ mips_cpu = 4010;
break;
case OPTION_NO_M4010:
- mips_4010 = 0;
break;
case OPTION_M4100:
- mips_4100 = 1;
+ mips_cpu = 4100;
break;
case OPTION_NO_M4100:
- mips_4100 = 0;
+ break;
+
+
+ case OPTION_M3900:
+ mips_cpu = 3900;
+ break;
+
+ case OPTION_NO_M3900:
break;
case OPTION_MIPS16:
- mips16 = 1;
- mips_no_prev_insn ();
+ mips_opts.mips16 = 1;
+ mips_no_prev_insn (false);
break;
case OPTION_NO_MIPS16:
- mips16 = 0;
- mips_no_prev_insn ();
+ mips_opts.mips16 = 0;
+ mips_no_prev_insn (false);
break;
case OPTION_MEMBEDDED_PIC:
mips_pic = EMBEDDED_PIC;
if (USE_GLOBAL_POINTER_OPT && g_switch_seen)
{
- as_bad ("-G may not be used with embedded PIC code");
+ as_bad (_("-G may not be used with embedded PIC code"));
return 0;
}
g_switch_value = 0x7fffffff;
case OPTION_CALL_SHARED:
if (OUTPUT_FLAVOR != bfd_target_elf_flavour)
{
- as_bad ("-call_shared is supported only for ELF format");
+ as_bad (_("-call_shared is supported only for ELF format"));
return 0;
}
mips_pic = SVR4_PIC;
if (g_switch_seen && g_switch_value != 0)
{
- as_bad ("-G may not be used with SVR4 PIC code");
+ as_bad (_("-G may not be used with SVR4 PIC code"));
return 0;
}
g_switch_value = 0;
case OPTION_NON_SHARED:
if (OUTPUT_FLAVOR != bfd_target_elf_flavour)
{
- as_bad ("-non_shared is supported only for ELF format");
+ as_bad (_("-non_shared is supported only for ELF format"));
return 0;
}
mips_pic = NO_PIC;
case 'G':
if (! USE_GLOBAL_POINTER_OPT)
{
- as_bad ("-G is not supported for this configuration");
+ as_bad (_("-G is not supported for this configuration"));
return 0;
}
else if (mips_pic == SVR4_PIC || mips_pic == EMBEDDED_PIC)
{
- as_bad ("-G may not be used with SVR4 or embedded PIC code");
+ as_bad (_("-G may not be used with SVR4 or embedded PIC code"));
return 0;
}
else
|| strcmp (*l, "elf64-littlemips") == 0)
break;
if (*l == NULL)
- as_fatal ("No compiled in support for 64 bit object file format");
+ as_fatal (_("No compiled in support for 64 bit object file format"));
free (list);
mips_64 = 1;
}
break;
+ case OPTION_GP32:
+ mips_gp32 = 1;
+ mips_64 = 0;
+
+ /* We deliberately don't allow "-gp32" to set the MIPS_32BITMODE
+ flag in object files because to do so would make it
+ impossible to link with libraries compiled without "-gp32".
+ This is unnecessarily restrictive.
+
+ We could solve this problem by adding "-gp32" multilibs to
+ gcc, but to set this flag before gcc is built with such
+ multilibs will break too many systems. */
+
+/* mips_32bitmode = 1; */
+ break;
+
+ case OPTION_GP64:
+ mips_gp32 = 0;
+ mips_64 = 1;
+/* mips_32bitmode = 0; */
+ break;
+
+ case OPTION_MABI:
+ if (strcmp (arg,"32") == 0
+ || strcmp (arg,"n32") == 0
+ || strcmp (arg,"64") == 0
+ || strcmp (arg,"o64") == 0
+ || strcmp (arg,"eabi") == 0)
+ mips_abi_string = arg;
+ break;
+
+ case OPTION_M7000_HILO_FIX:
+ mips_7000_hilo_fix = true;
+ break;
+
+ case OPTION_NO_M7000_HILO_FIX:
+ mips_7000_hilo_fix = false;
+ break;
+
default:
return 0;
}
return 1;
}
+
+static void
+show (stream, string, col_p, first_p)
+ FILE *stream;
+ char *string;
+ int *col_p;
+ int *first_p;
+{
+ if (*first_p)
+ {
+ fprintf (stream, "%24s", "");
+ *col_p = 24;
+ }
+ else
+ {
+ fprintf (stream, ", ");
+ *col_p += 2;
+ }
+
+ if (*col_p + strlen (string) > 72)
+ {
+ fprintf (stream, "\n%24s", "");
+ *col_p = 24;
+ }
+
+ fprintf (stream, "%s", string);
+ *col_p += strlen (string);
+
+ *first_p = 0;
+}
+
+
void
md_show_usage (stream)
FILE *stream;
{
- fprintf(stream, "\
+ int column, first;
+
+ fprintf(stream, _("\
MIPS options:\n\
-membedded-pic generate embedded position independent code\n\
-EB generate big endian output\n\
-EL generate little endian output\n\
-g, -g2 do not remove uneeded NOPs or swap branches\n\
-G NUM allow referencing objects up to NUM bytes\n\
- implicitly with the gp register [default 8]\n");
- fprintf(stream, "\
--mips1, -mcpu=r{2,3}000 generate code for r2000 and r3000\n\
--mips2, -mcpu=r6000 generate code for r6000\n\
--mips3, -mcpu=r4000 generate code for r4000\n\
--mips4, -mcpu=r8000 generate code for r8000\n\
--mcpu=vr4300 generate code for vr4300\n\
--mcpu=vr4100 generate code for vr4100\n\
--m4650 permit R4650 instructions\n\
--no-m4650 do not permit R4650 instructions\n\
--m4010 permit R4010 instructions\n\
--no-m4010 do not permit R4010 instructions\n\
--m4100 permit VR4100 instructions\n\
--no-m4100 do not permit VR4100 instructions\n");
- fprintf(stream, "\
+ implicitly with the gp register [default 8]\n"));
+ fprintf(stream, _("\
+-mips1 generate MIPS ISA I instructions\n\
+-mips2 generate MIPS ISA II instructions\n\
+-mips3 generate MIPS ISA III instructions\n\
+-mips4 generate MIPS ISA IV instructions\n\
+-mcpu=CPU generate code for CPU, where CPU is one of:\n"));
+
+ first = 1;
+
+ show (stream, "2000", &column, &first);
+ show (stream, "3000", &column, &first);
+ show (stream, "3900", &column, &first);
+ show (stream, "4000", &column, &first);
+ show (stream, "4010", &column, &first);
+ show (stream, "4100", &column, &first);
+ show (stream, "4111", &column, &first);
+ show (stream, "4300", &column, &first);
+ show (stream, "4400", &column, &first);
+ show (stream, "4600", &column, &first);
+ show (stream, "4650", &column, &first);
+ show (stream, "5000", &column, &first);
+ show (stream, "6000", &column, &first);
+ show (stream, "8000", &column, &first);
+ show (stream, "10000", &column, &first);
+ fputc ('\n', stream);
+
+ fprintf (stream, _("\
+-mCPU equivalent to -mcpu=CPU.\n\
+-no-mCPU don't generate code specific to CPU.\n\
+ For -mCPU and -no-mCPU, CPU must be one of:\n"));
+
+ first = 1;
+
+ show (stream, "3900", &column, &first);
+ show (stream, "4010", &column, &first);
+ show (stream, "4100", &column, &first);
+ show (stream, "4650", &column, &first);
+ fputc ('\n', stream);
+
+ fprintf(stream, _("\
-mips16 generate mips16 instructions\n\
--no-mips16 do not generate mips16 instructions\n");
- fprintf(stream, "\
+-no-mips16 do not generate mips16 instructions\n"));
+ fprintf(stream, _("\
-O0 remove unneeded NOPs, do not swap branches\n\
-O remove unneeded NOPs and swap branches\n\
--trap, --no-break trap exception on div by 0 and mult overflow\n\
---break, --no-trap break exception on div by 0 and mult overflow\n");
+--break, --no-trap break exception on div by 0 and mult overflow\n"));
#ifdef OBJ_ELF
- fprintf(stream, "\
+ fprintf(stream, _("\
-KPIC, -call_shared generate SVR4 position independent code\n\
-non_shared do not generate position independent code\n\
-xgot assume a 32 bit GOT\n\
-32 create 32 bit object file (default)\n\
--64 create 64 bit object file\n");
+-64 create 64 bit object file\n"));
#endif
}
\f
+void
+mips_init_after_args ()
+{
+ /* initialize opcodes */
+ bfd_mips_num_opcodes = bfd_mips_num_builtin_opcodes;
+ mips_opcodes = (struct mips_opcode*) mips_builtin_opcodes;
+}
+
long
md_pcrel_from (fixP)
fixS *fixP;
void
cons_fix_new_mips (frag, where, nbytes, exp)
- fragS *frag;
+ fragS *frag ATTRIBUTE_UNUSED;
int where;
unsigned int nbytes;
expressionS *exp;
#endif
if (nbytes != 2 && nbytes != 4 && nbytes != 8)
- as_bad ("Unsupported reloc size %d", nbytes);
+ as_bad (_("Unsupported reloc size %d"), nbytes);
fix_new_exp (frag_now, where, (int) nbytes, exp, 0,
(nbytes == 2
: (nbytes == 4 ? BFD_RELOC_32 : BFD_RELOC_64)));
}
+/* This is called before the symbol table is processed. In order to
+ work with gcc when using mips-tfile, we must keep all local labels.
+ However, in other cases, we want to discard them. If we were
+ called with -g, but we didn't see any debugging information, it may
+ mean that gcc is smuggling debugging information through to
+ mips-tfile, in which case we must generate all local labels. */
+
+void
+mips_frob_file_before_adjust ()
+{
+#ifndef NO_ECOFF_DEBUGGING
+ if (ECOFF_DEBUGGING
+ && mips_debug != 0
+ && ! ecoff_debugging_seen)
+ flag_keep_locals = 1;
+#endif
+}
+
/* Sort any unmatched HI16_S relocs so that they immediately precede
the corresponding LO reloc. This is called before md_apply_fix and
tc_gen_reloc. Unmatched HI16_S relocs can only be generated by
if (f != NULL)
break;
+#if 0 /* GCC code motion plus incomplete dead code elimination
+ can leave a %hi without a %lo. */
if (pass == 1)
as_warn_where (l->fixp->fx_file, l->fixp->fx_line,
- "Unmatched %%hi reloc");
+ _("Unmatched %%hi reloc"));
+#endif
}
}
}
fixup requires the special reloc. */
#define SWITCH_TABLE(fixp) \
((fixp)->fx_r_type == BFD_RELOC_32 \
+ && OUTPUT_FLAVOR != bfd_target_elf_flavour \
&& (fixp)->fx_addsy != NULL \
&& (fixp)->fx_subsy != NULL \
&& S_GET_SEGMENT ((fixp)->fx_addsy) == text_section \
mips_force_relocation (fixp)
fixS *fixp;
{
+ if (fixp->fx_r_type == BFD_RELOC_VTABLE_INHERIT
+ || fixp->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
+ return 1;
+
return (mips_pic == EMBEDDED_PIC
&& (fixp->fx_pcrel
|| SWITCH_TABLE (fixp)
assert (fixP->fx_size == 4
|| fixP->fx_r_type == BFD_RELOC_16
- || fixP->fx_r_type == BFD_RELOC_64);
+ || fixP->fx_r_type == BFD_RELOC_64
+ || fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT
+ || fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY);
value = *valueP;
/* If we aren't adjusting this fixup to be against the section
symbol, we need to adjust the value. */
-#ifdef S_GET_OTHER
- if (fixP->fx_addsy != NULL
- && OUTPUT_FLAVOR == bfd_target_elf_flavour
- && S_GET_OTHER (fixP->fx_addsy) == STO_MIPS16)
- {
- value -= S_GET_VALUE (fixP->fx_addsy);
- if (value != 0 && ! fixP->fx_pcrel)
+#ifdef OBJ_ELF
+ if (fixP->fx_addsy != NULL && OUTPUT_FLAVOR == bfd_target_elf_flavour)
+ {
+ if (S_GET_OTHER (fixP->fx_addsy) == STO_MIPS16
+ || S_IS_WEAK (fixP->fx_addsy)
+ || (symbol_used_in_reloc_p (fixP->fx_addsy)
+ && (((bfd_get_section_flags (stdoutput,
+ S_GET_SEGMENT (fixP->fx_addsy))
+ & SEC_LINK_ONCE) != 0)
+ || !strncmp (segment_name (S_GET_SEGMENT (fixP->fx_addsy)),
+ ".gnu.linkonce",
+ sizeof (".gnu.linkonce") - 1))))
+
+ {
+ value -= S_GET_VALUE (fixP->fx_addsy);
+ if (value != 0 && ! fixP->fx_pcrel)
+ {
+ /* In this case, the bfd_install_relocation routine will
+ incorrectly add the symbol value back in. We just want
+ the addend to appear in the object file.
+ FIXME: If this makes VALUE zero, we're toast. */
+ value -= S_GET_VALUE (fixP->fx_addsy);
+ }
+ }
+
+ /* This code was generated using trial and error and so is
+ fragile and not trustworthy. If you change it, you should
+ rerun the elf-rel, elf-rel2, and empic testcases and ensure
+ they still pass. */
+ if (fixP->fx_pcrel || fixP->fx_subsy != NULL)
{
- /* In this case, the bfd_install_relocation routine will
- incorrectly add the symbol value back in. We just want
- the addend to appear in the object file. */
- value -= S_GET_VALUE (fixP->fx_addsy);
+ value += fixP->fx_frag->fr_address + fixP->fx_where;
+
+ /* BFD's REL handling, for MIPS, is _very_ weird.
+ This gives the right results, but it can't possibly
+ be the way things are supposed to work. */
+ if (fixP->fx_r_type != BFD_RELOC_16_PCREL_S2
+ || S_GET_SEGMENT (fixP->fx_addsy) != undefined_section)
+ value += fixP->fx_frag->fr_address + fixP->fx_where;
}
}
#endif
case BFD_RELOC_MIPS_GOT_LO16:
case BFD_RELOC_MIPS_CALL_HI16:
case BFD_RELOC_MIPS_CALL_LO16:
+ case BFD_RELOC_MIPS16_GPREL:
if (fixP->fx_pcrel)
as_bad_where (fixP->fx_file, fixP->fx_line,
- "Invalid PC relative reloc");
+ _("Invalid PC relative reloc"));
/* Nothing needed to do. The value comes from the reloc entry */
break;
case BFD_RELOC_PCREL_HI16_S:
/* The addend for this is tricky if it is internal, so we just
- do everything here rather than in bfd_perform_relocation. */
- if ((fixP->fx_addsy->bsym->flags & BSF_SECTION_SYM) == 0)
+ do everything here rather than in bfd_install_relocation. */
+ if (OUTPUT_FLAVOR == bfd_target_elf_flavour
+ && !fixP->fx_done
+ && value != 0)
+ break;
+ if (fixP->fx_addsy
+ && (symbol_get_bfdsym (fixP->fx_addsy)->flags & BSF_SECTION_SYM) == 0)
{
/* For an external symbol adjust by the address to make it
pcrel_offset. We use the address of the RELLO reloc
case BFD_RELOC_PCREL_LO16:
/* The addend for this is tricky if it is internal, so we just
- do everything here rather than in bfd_perform_relocation. */
- if ((fixP->fx_addsy->bsym->flags & BSF_SECTION_SYM) == 0)
+ do everything here rather than in bfd_install_relocation. */
+ if (OUTPUT_FLAVOR == bfd_target_elf_flavour
+ && !fixP->fx_done
+ && value != 0)
+ break;
+ if (fixP->fx_addsy
+ && (symbol_get_bfdsym (fixP->fx_addsy)->flags & BSF_SECTION_SYM) == 0)
value += fixP->fx_frag->fr_address + fixP->fx_where;
buf = (unsigned char *) fixP->fx_frag->fr_literal + fixP->fx_where;
if (target_big_endian)
}
break;
+ case BFD_RELOC_RVA:
case BFD_RELOC_32:
/* If we are deleting this reloc entry, we must fill in the
value now. This can happen if we have a .word which is not
{
if (value < -0x8000 || value > 0x7fff)
as_bad_where (fixP->fx_file, fixP->fx_line,
- "relocation overflow");
+ _("relocation overflow"));
buf = (unsigned char *) fixP->fx_frag->fr_literal + fixP->fx_where;
if (target_big_endian)
buf += 2;
*/
if ((value & 0x3) != 0)
as_bad_where (fixP->fx_file, fixP->fx_line,
- "Branch to odd address (%lx)", value);
+ _("Branch to odd address (%lx)"), value);
+
+ if (!fixP->fx_done && value != 0)
+ break;
+ /* If 'value' is zero, the remaining reloc code won't actually
+ do the store, so it must be done here. This is probably
+ a bug somewhere. */
+ if (!fixP->fx_done)
+ value -= fixP->fx_frag->fr_address + fixP->fx_where;
+
value >>= 2;
/* update old instruction data */
handle these cases, but it appears to do it
incorrectly. */
as_bad_where (fixP->fx_file, fixP->fx_line,
- "Relocation overflow");
+ _("Branch out of range"));
}
}
md_number_to_chars ((char *) buf, (valueT) insn, 4);
break;
+ case BFD_RELOC_VTABLE_INHERIT:
+ fixP->fx_done = 0;
+ if (fixP->fx_addsy
+ && !S_IS_DEFINED (fixP->fx_addsy)
+ && !S_IS_WEAK (fixP->fx_addsy))
+ S_SET_WEAK (fixP->fx_addsy);
+ break;
+
+ case BFD_RELOC_VTABLE_ENTRY:
+ fixP->fx_done = 0;
+ break;
+
default:
internalError ();
}
return;
}
}
- printf ("%08lx UNDEFINED\n", oc);
+ printf (_("%08lx UNDEFINED\n"), oc);
}
#endif
symbolS *label;
{
mips_emit_delays (false);
- frag_align (to, fill);
+ frag_align (to, fill, 0);
record_alignment (now_seg, to);
if (label != NULL)
{
assert (S_GET_SEGMENT (label) == now_seg);
- label->sy_frag = frag_now;
+ symbol_set_frag (label, frag_now);
S_SET_VALUE (label, (valueT) frag_now_fix ());
}
}
static void
s_align (x)
- int x;
+ int x ATTRIBUTE_UNUSED;
{
register int temp;
register long temp_fill;
temp = get_absolute_expression ();
if (temp > max_alignment)
- as_bad ("Alignment too large: %d. assumed.", temp = max_alignment);
+ as_bad (_("Alignment too large: %d. assumed."), temp = max_alignment);
else if (temp < 0)
{
- as_warn ("Alignment negative: 0 assumed.");
+ as_warn (_("Alignment negative: 0 assumed."));
temp = 0;
}
if (*input_line_pointer == ',')
&& (sec == 'd' || sec == 'r'))
sec = 's';
+#ifdef OBJ_ELF
+ /* The ELF backend needs to know that we are changing sections, so
+ that .previous works correctly. We could do something like check
+ for a obj_section_change_hook macro, but that might be confusing
+ as it would not be appropriate to use it in the section changing
+ functions in read.c, since obj-elf.c intercepts those. FIXME:
+ This should be cleaner, somehow. */
+ obj_elf_section_change_hook ();
+#endif
+
mips_emit_delays (false);
switch (sec)
{
| SEC_RELOC
| SEC_DATA));
if (strcmp (TARGET_OS, "elf") != 0)
- bfd_set_section_alignment (stdoutput, seg, 4);
+ record_alignment (seg, 4);
}
demand_empty_rest_of_line ();
}
else
{
- as_bad ("No read only data section in this object file format");
+ as_bad (_("No read only data section in this object file format"));
demand_empty_rest_of_line ();
return;
}
SEC_ALLOC | SEC_LOAD | SEC_RELOC
| SEC_DATA);
if (strcmp (TARGET_OS, "elf") != 0)
- bfd_set_section_alignment (stdoutput, seg, 4);
+ record_alignment (seg, 4);
}
demand_empty_rest_of_line ();
break;
}
else
{
- as_bad ("Global pointers not supported; recompile -G 0");
+ as_bad (_("Global pointers not supported; recompile -G 0"));
demand_empty_rest_of_line ();
return;
}
mips_emit_delays (false);
if (auto_align)
- if (type == 'd')
- mips_align (3, 0, label);
- else
- mips_align (2, 0, label);
+ {
+ if (type == 'd')
+ mips_align (3, 0, label);
+ else
+ mips_align (2, 0, label);
+ }
mips_clear_insn_labels ();
static void
s_mips_globl (x)
- int x;
+ int x ATTRIBUTE_UNUSED;
{
char *name;
int c;
c = get_symbol_end ();
sec = bfd_get_section_by_name (stdoutput, secname);
if (sec == NULL)
- as_bad ("%s: no such section", secname);
+ as_bad (_("%s: no such section"), secname);
*input_line_pointer = c;
if (sec != NULL && (sec->flags & SEC_CODE) != 0)
flag = BSF_FUNCTION;
}
- symbolP->bsym->flags |= flag;
+ symbol_get_bfdsym (symbolP)->flags |= flag;
S_SET_EXTERNAL (symbolP);
demand_empty_rest_of_line ();
static void
s_option (x)
- int x;
+ int x ATTRIBUTE_UNUSED;
{
char *opt;
char c;
else if (i == 2)
mips_pic = SVR4_PIC;
else
- as_bad (".option pic%d not supported", i);
+ as_bad (_(".option pic%d not supported"), i);
if (USE_GLOBAL_POINTER_OPT && mips_pic == SVR4_PIC)
{
if (g_switch_seen && g_switch_value != 0)
- as_warn ("-G may not be used with SVR4 PIC code");
+ as_warn (_("-G may not be used with SVR4 PIC code"));
g_switch_value = 0;
bfd_set_gp_size (stdoutput, 0);
}
}
else
- as_warn ("Unrecognized option \"%s\"", opt);
+ as_warn (_("Unrecognized option \"%s\""), opt);
*input_line_pointer = c;
demand_empty_rest_of_line ();
}
+/* This structure is used to hold a stack of .set values. */
+
+struct mips_option_stack
+{
+ struct mips_option_stack *next;
+ struct mips_set_options options;
+};
+
+static struct mips_option_stack *mips_opts_stack;
+
+/* Handle the .set pseudo-op. */
+
static void
s_mipsset (x)
- int x;
+ int x ATTRIBUTE_UNUSED;
{
char *name = input_line_pointer, ch;
if (strcmp (name, "reorder") == 0)
{
- if (mips_noreorder)
+ if (mips_opts.noreorder && prev_nop_frag != NULL)
{
- prev_insn_unreordered = 1;
- prev_prev_insn_unreordered = 1;
+ /* If we still have pending nops, we can discard them. The
+ usual nop handling will insert any that are still
+ needed. */
+ prev_nop_frag->fr_fix -= (prev_nop_frag_holds
+ * (mips_opts.mips16 ? 2 : 4));
+ prev_nop_frag = NULL;
}
- mips_noreorder = 0;
+ mips_opts.noreorder = 0;
}
else if (strcmp (name, "noreorder") == 0)
{
mips_emit_delays (true);
- mips_noreorder = 1;
+ mips_opts.noreorder = 1;
mips_any_noreorder = 1;
}
else if (strcmp (name, "at") == 0)
{
- mips_noat = 0;
+ mips_opts.noat = 0;
}
else if (strcmp (name, "noat") == 0)
{
- mips_noat = 1;
+ mips_opts.noat = 1;
}
else if (strcmp (name, "macro") == 0)
{
- mips_warn_about_macros = 0;
+ mips_opts.warn_about_macros = 0;
}
else if (strcmp (name, "nomacro") == 0)
{
- if (mips_noreorder == 0)
- as_bad ("`noreorder' must be set before `nomacro'");
- mips_warn_about_macros = 1;
+ if (mips_opts.noreorder == 0)
+ as_bad (_("`noreorder' must be set before `nomacro'"));
+ mips_opts.warn_about_macros = 1;
}
else if (strcmp (name, "move") == 0 || strcmp (name, "novolatile") == 0)
{
- mips_nomove = 0;
+ mips_opts.nomove = 0;
}
else if (strcmp (name, "nomove") == 0 || strcmp (name, "volatile") == 0)
{
- mips_nomove = 1;
+ mips_opts.nomove = 1;
}
else if (strcmp (name, "bopt") == 0)
{
- mips_nobopt = 0;
+ mips_opts.nobopt = 0;
}
else if (strcmp (name, "nobopt") == 0)
{
- mips_nobopt = 1;
+ mips_opts.nobopt = 1;
}
else if (strcmp (name, "mips16") == 0
|| strcmp (name, "MIPS-16") == 0)
- mips16 = 1;
+ mips_opts.mips16 = 1;
else if (strcmp (name, "nomips16") == 0
|| strcmp (name, "noMIPS-16") == 0)
- mips16 = 0;
+ mips_opts.mips16 = 0;
else if (strncmp (name, "mips", 4) == 0)
{
int isa;
say, misuse can cause serious problems. */
isa = atoi (name + 4);
if (isa == 0)
- mips_isa = file_mips_isa;
+ mips_opts.isa = file_mips_isa;
else if (isa < 1 || isa > 4)
- as_bad ("unknown ISA level");
+ as_bad (_("unknown ISA level"));
else
- mips_isa = isa;
+ mips_opts.isa = isa;
}
else if (strcmp (name, "autoextend") == 0)
- mips16_autoextend = 1;
+ mips_opts.noautoextend = 0;
else if (strcmp (name, "noautoextend") == 0)
- mips16_autoextend = 0;
+ mips_opts.noautoextend = 1;
+ else if (strcmp (name, "push") == 0)
+ {
+ struct mips_option_stack *s;
+
+ s = (struct mips_option_stack *) xmalloc (sizeof *s);
+ s->next = mips_opts_stack;
+ s->options = mips_opts;
+ mips_opts_stack = s;
+ }
+ else if (strcmp (name, "pop") == 0)
+ {
+ struct mips_option_stack *s;
+
+ s = mips_opts_stack;
+ if (s == NULL)
+ as_bad (_(".set pop with no .set push"));
+ else
+ {
+ /* If we're changing the reorder mode we need to handle
+ delay slots correctly. */
+ if (s->options.noreorder && ! mips_opts.noreorder)
+ mips_emit_delays (true);
+ else if (! s->options.noreorder && mips_opts.noreorder)
+ {
+ if (prev_nop_frag != NULL)
+ {
+ prev_nop_frag->fr_fix -= (prev_nop_frag_holds
+ * (mips_opts.mips16 ? 2 : 4));
+ prev_nop_frag = NULL;
+ }
+ }
+
+ mips_opts = s->options;
+ mips_opts_stack = s->next;
+ free (s);
+ }
+ }
else
{
- as_warn ("Tried to set unrecognized symbol: %s\n", name);
+ as_warn (_("Tried to set unrecognized symbol: %s\n"), name);
}
*input_line_pointer = ch;
demand_empty_rest_of_line ();
static void
s_abicalls (ignore)
- int ignore;
+ int ignore ATTRIBUTE_UNUSED;
{
mips_pic = SVR4_PIC;
if (USE_GLOBAL_POINTER_OPT)
{
if (g_switch_seen && g_switch_value != 0)
- as_warn ("-G may not be used with SVR4 PIC code");
+ as_warn (_("-G may not be used with SVR4 PIC code"));
g_switch_value = 0;
}
bfd_set_gp_size (stdoutput, 0);
static void
s_cpload (ignore)
- int ignore;
+ int ignore ATTRIBUTE_UNUSED;
{
expressionS ex;
int icnt = 0;
}
/* .cpload should be a in .set noreorder section. */
- if (mips_noreorder == 0)
- as_warn (".cpload not in noreorder section");
+ if (mips_opts.noreorder == 0)
+ as_warn (_(".cpload not in noreorder section"));
ex.X_op = O_symbol;
ex.X_add_symbol = symbol_find_or_make ("_gp_disp");
ex.X_add_number = 0;
/* In ELF, this symbol is implicitly an STT_OBJECT symbol. */
- ex.X_add_symbol->bsym->flags |= BSF_OBJECT;
+ symbol_get_bfdsym (ex.X_add_symbol)->flags |= BSF_OBJECT;
macro_build_lui ((char *) NULL, &icnt, &ex, GP);
macro_build ((char *) NULL, &icnt, &ex, "addiu", "t,r,j", GP, GP,
static void
s_cprestore (ignore)
- int ignore;
+ int ignore ATTRIBUTE_UNUSED;
{
expressionS ex;
int icnt = 0;
ex.X_add_number = mips_cprestore_offset;
macro_build ((char *) NULL, &icnt, &ex,
- mips_isa < 3 ? "sw" : "sd",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "sw" : "sd"),
"t,o(b)", GP, (int) BFD_RELOC_LO16, SP);
demand_empty_rest_of_line ();
static void
s_gpword (ignore)
- int ignore;
+ int ignore ATTRIBUTE_UNUSED;
{
symbolS *label;
expressionS ex;
if (ex.X_op != O_symbol || ex.X_add_number != 0)
{
- as_bad ("Unsupported use of .gpword");
+ as_bad (_("Unsupported use of .gpword"));
ignore_rest_of_line ();
}
static void
s_cpadd (ignore)
- int ignore;
+ int ignore ATTRIBUTE_UNUSED;
{
int icnt = 0;
int reg;
/* Add $gp to the register named as an argument. */
reg = tc_get_register (0);
macro_build ((char *) NULL, &icnt, (expressionS *) NULL,
- mips_isa < 3 ? "addu" : "daddu",
+ ((bfd_arch_bits_per_address (stdoutput) == 32
+ || ! ISA_HAS_64BIT_REGS (mips_opts.isa))
+ ? "addu" : "daddu"),
"d,v,t", reg, reg, GP);
demand_empty_rest_of_line ();
}
+/* Handle the .insn pseudo-op. This marks instruction labels in
+ mips16 mode. This permits the linker to handle them specially,
+ such as generating jalx instructions when needed. We also make
+ them odd for the duration of the assembly, in order to generate the
+ right sort of code. We will make them even in the adjust_symtab
+ routine, while leaving them marked. This is convenient for the
+ debugger and the disassembler. The linker knows to make them odd
+ again. */
+
+static void
+s_insn (ignore)
+ int ignore ATTRIBUTE_UNUSED;
+{
+ if (mips_opts.mips16)
+ mips16_mark_labels ();
+
+ demand_empty_rest_of_line ();
+}
+
+/* Handle a .stabn directive. We need these in order to mark a label
+ as being a mips16 text label correctly. Sometimes the compiler
+ will emit a label, followed by a .stabn, and then switch sections.
+ If the label and .stabn are in mips16 mode, then the label is
+ really a mips16 text label. */
+
+static void
+s_mips_stab (type)
+ int type;
+{
+ if (type == 'n' && mips_opts.mips16)
+ mips16_mark_labels ();
+
+ s_stab (type);
+}
+
+/* Handle the .weakext pseudo-op as defined in Kane and Heinrich.
+ */
+
+static void
+s_mips_weakext (ignore)
+ int ignore ATTRIBUTE_UNUSED;
+{
+ char *name;
+ int c;
+ symbolS *symbolP;
+ expressionS exp;
+
+ name = input_line_pointer;
+ c = get_symbol_end ();
+ symbolP = symbol_find_or_make (name);
+ S_SET_WEAK (symbolP);
+ *input_line_pointer = c;
+
+ SKIP_WHITESPACE ();
+
+ if (! is_end_of_line[(unsigned char) *input_line_pointer])
+ {
+ if (S_IS_DEFINED (symbolP))
+ {
+ as_bad ("Ignoring attempt to redefine symbol `%s'.",
+ S_GET_NAME (symbolP));
+ ignore_rest_of_line ();
+ return;
+ }
+
+ if (*input_line_pointer == ',')
+ {
+ ++input_line_pointer;
+ SKIP_WHITESPACE ();
+ }
+
+ expression (&exp);
+ if (exp.X_op != O_symbol)
+ {
+ as_bad ("bad .weakext directive");
+ ignore_rest_of_line();
+ return;
+ }
+ symbol_set_value_expression (symbolP, &exp);
+ }
+
+ demand_empty_rest_of_line ();
+}
+
/* Parse a register string into a number. Called from the ECOFF code
to parse .frame. The argument is non-zero if this is the frame
register, so that we can record it in mips_frame_reg. */
SKIP_WHITESPACE ();
if (*input_line_pointer++ != '$')
{
- as_warn ("expected `$'");
+ as_warn (_("expected `$'"));
reg = 0;
}
else if (isdigit ((unsigned char) *input_line_pointer))
reg = get_absolute_expression ();
if (reg < 0 || reg >= 32)
{
- as_warn ("Bad register number");
+ as_warn (_("Bad register number"));
reg = 0;
}
}
reg = AT;
else
{
- as_warn ("Unrecognized register name");
+ as_warn (_("Unrecognized register name"));
reg = 0;
}
input_line_pointer += 2;
undefined earlier.) */
static int
-nopic_need_relax (sym)
+nopic_need_relax (sym, before_relaxing)
symbolS *sym;
+ int before_relaxing;
{
if (sym == 0)
return 0;
|| strcmp (symname, "end") == 0
|| strcmp (symname, "_gp_disp") == 0))
change = 1;
- else if (! S_IS_DEFINED (sym)
+ else if ((! S_IS_DEFINED (sym) || S_IS_COMMON (sym))
&& (0
#ifndef NO_ECOFF_DEBUGGING
- || (sym->ecoff_extern_size != 0
- && sym->ecoff_extern_size <= g_switch_value)
+ || (symbol_get_obj (sym)->ecoff_extern_size != 0
+ && (symbol_get_obj (sym)->ecoff_extern_size
+ <= g_switch_value))
+#endif
+ /* We must defer this decision until after the whole
+ file has been read, since there might be a .extern
+ after the first use of this symbol. */
+ || (before_relaxing
+#ifndef NO_ECOFF_DEBUGGING
+ && symbol_get_obj (sym)->ecoff_extern_size == 0
#endif
+ && S_GET_VALUE (sym) == 0)
|| (S_GET_VALUE (sym) != 0
&& S_GET_VALUE (sym) <= g_switch_value)))
change = 0;
assert (strcmp (segname, ".lit8") != 0
&& strcmp (segname, ".lit4") != 0);
change = (strcmp (segname, ".sdata") != 0
- && strcmp (segname, ".sbss") != 0);
+ && strcmp (segname, ".sbss") != 0
+ && strncmp (segname, ".sdata.", 7) != 0
+ && strncmp (segname, ".gnu.linkonce.s.", 16) != 0);
}
return change;
}
maxtiny = (1 << (op->nbits - 1)) - 1;
}
- /* We can't call S_GET_VALUE here, because we don't want to lock in
- a particular frag address. */
- if (fragp->fr_symbol->sy_value.X_op == O_constant)
+ /* We can't always call S_GET_VALUE here, because we don't want to
+ lock in a particular frag address. */
+ if (symbol_constant_p (fragp->fr_symbol))
{
- val = (fragp->fr_symbol->sy_value.X_add_number
- + fragp->fr_symbol->sy_frag->fr_address);
+ val = (S_GET_VALUE (fragp->fr_symbol)
+ + symbol_get_frag (fragp->fr_symbol)->fr_address);
symsec = S_GET_SEGMENT (fragp->fr_symbol);
}
- else if (fragp->fr_symbol->sy_value.X_op == O_symbol
- && (fragp->fr_symbol->sy_value.X_add_symbol->sy_value.X_op
- == O_constant))
+ else if (symbol_equated_p (fragp->fr_symbol)
+ && (symbol_constant_p
+ (symbol_get_value_expression (fragp->fr_symbol)->X_add_symbol)))
{
- val = (fragp->fr_symbol->sy_value.X_add_symbol->sy_value.X_add_number
- + fragp->fr_symbol->sy_value.X_add_symbol->sy_frag->fr_address
- + fragp->fr_symbol->sy_value.X_add_number
- + fragp->fr_symbol->sy_frag->fr_address);
- symsec = S_GET_SEGMENT (fragp->fr_symbol->sy_value.X_add_symbol);
+ symbolS *eqsym;
+
+ eqsym = symbol_get_value_expression (fragp->fr_symbol)->X_add_symbol;
+ val = (S_GET_VALUE (eqsym)
+ + symbol_get_frag (eqsym)->fr_address
+ + symbol_get_value_expression (fragp->fr_symbol)->X_add_number
+ + symbol_get_frag (fragp->fr_symbol)->fr_address);
+ symsec = S_GET_SEGMENT (eqsym);
}
else
return 1;
/* FIXME: We should support this, and let the linker
catch branches and loads that are out of range. */
as_bad_where (fragp->fr_file, fragp->fr_line,
- "unsupported PC relative reference to different section");
+ _("unsupported PC relative reference to different section"));
return 1;
}
in STRETCH in order to get a better estimate of the address.
This particularly matters because of the shift bits. */
if (stretch != 0
- && fragp->fr_symbol->sy_frag->fr_address >= fragp->fr_address)
+ && (symbol_get_frag (fragp->fr_symbol)->fr_address
+ >= fragp->fr_address))
{
fragS *f;
- /* Adjust stretch for any alignment frag. */
- for (f = fragp; f != fragp->fr_symbol->sy_frag; f = f->fr_next)
+ /* Adjust stretch for any alignment frag. Note that if have
+ been expanding the earlier code, the symbol may be
+ defined in what appears to be an earlier frag. FIXME:
+ This doesn't handle the fr_subtype field, which specifies
+ a maximum number of bytes to skip when doing an
+ alignment. */
+ for (f = fragp;
+ f != NULL && f != symbol_get_frag (fragp->fr_symbol);
+ f = f->fr_next)
{
- assert (f != NULL);
if (f->fr_type == rs_align || f->fr_type == rs_align_code)
{
if (stretch < 0)
break;
}
}
- val += stretch;
+ if (f != NULL)
+ val += stretch;
}
addr = fragp->fr_address + fragp->fr_fix;
/* The base address rules are complicated. The base address of
a branch is the following instruction. The base address of a
PC relative load or add is the instruction itself, but if it
- is extended add 2, and if it is in a delay slot (in which
- case it can not be extended) use the address of the
- instruction whose delay slot it is in. */
+ is in a delay slot (in which case it can not be extended) use
+ the address of the instruction whose delay slot it is in. */
if (type == 'p' || type == 'q')
{
addr += 2;
+
+ /* If we are currently assuming that this frag should be
+ extended, then, the current address is two bytes
+ higher. */
+ if (RELAX_MIPS16_EXTENDED (fragp->fr_subtype))
+ addr += 2;
+
/* Ignore the low bit in the target, since it will be set
for a text label. */
if ((val & 1) != 0)
else if (RELAX_MIPS16_DSLOT (fragp->fr_subtype))
addr -= 2;
- /* If we are currently assuming that this frag should be
- extended, then the current address is two bytes higher. */
- if (RELAX_MIPS16_EXTENDED (fragp->fr_subtype))
- addr += 2;
-
val -= addr & ~ ((1 << op->shift) - 1);
/* Branch offsets have an implicit 0 in the lowest bit. */
}
}
else if (symsec != absolute_section && sec != NULL)
- as_bad_where (fragp->fr_file, fragp->fr_line, "unsupported relocation");
+ as_bad_where (fragp->fr_file, fragp->fr_line, _("unsupported relocation"));
if ((val & ((1 << op->shift) - 1)) != 0
|| val < (mintiny << op->shift)
fragS *fragp;
asection *segtype;
{
- int change;
+ int change = 0;
if (RELAX_MIPS16_P (fragp->fr_subtype))
{
if (mips_pic == NO_PIC)
{
- change = nopic_need_relax (fragp->fr_symbol);
+ change = nopic_need_relax (fragp->fr_symbol, 0);
}
else if (mips_pic == SVR4_PIC)
{
- asection *symsec = fragp->fr_symbol->bsym->section;
+ symbolS *sym;
+ asection *symsec;
+
+ sym = fragp->fr_symbol;
+
+ /* Handle the case of a symbol equated to another symbol. */
+ while (symbol_equated_p (sym)
+ && (! S_IS_DEFINED (sym) || S_IS_COMMON (sym)))
+ {
+ symbolS *n;
+
+ /* It's possible to get a loop here in a badly written
+ program. */
+ n = symbol_get_value_expression (sym)->X_add_symbol;
+ if (n == sym)
+ break;
+ sym = n;
+ }
+
+ symsec = S_GET_SEGMENT (sym);
/* This must duplicate the test in adjust_reloc_syms. */
change = (symsec != &bfd_und_section
&& symsec != &bfd_abs_section
- && ! bfd_is_com_section (symsec));
+ && ! bfd_is_com_section (symsec)
+#ifdef OBJ_ELF
+ /* A weak symbol is treated as external. */
+ && ! S_IS_WEAK (sym)
+#endif
+ );
}
else
abort ();
+ RELAX_RELOC1 (fragp->fr_subtype));
/* FIXME: This really needs as_warn_where. */
if (RELAX_WARN (fragp->fr_subtype))
- as_warn ("AT used after \".set noat\" or macro used after \".set nomacro\"");
+ as_warn (_("AT used after \".set noat\" or macro used after \".set nomacro\""));
}
if (! change)
{
if (fixp->fx_r_type == BFD_RELOC_MIPS16_JMP)
return 0;
+ if (fixp->fx_r_type == BFD_RELOC_VTABLE_INHERIT
+ || fixp->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
+ return 0;
if (fixp->fx_addsy == NULL)
return 1;
-#ifdef S_GET_OTHER
+#ifdef OBJ_ELF
if (OUTPUT_FLAVOR == bfd_target_elf_flavour
- && S_GET_OTHER (fixp->fx_addsy) == STO_MIPS16)
+ && S_GET_OTHER (fixp->fx_addsy) == STO_MIPS16
+ && fixp->fx_subsy == NULL)
return 0;
#endif
return 1;
arelent **
tc_gen_reloc (section, fixp)
- asection *section;
+ asection *section ATTRIBUTE_UNUSED;
fixS *fixp;
{
static arelent *retval[4];
reloc = retval[0] = (arelent *) xmalloc (sizeof (arelent));
retval[1] = NULL;
- reloc->sym_ptr_ptr = &fixp->fx_addsy->bsym;
+ reloc->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *));
+ *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
reloc->address = fixp->fx_frag->fr_address + fixp->fx_where;
if (mips_pic == EMBEDDED_PIC
subtrahend. */
reloc->addend = reloc->address - S_GET_VALUE (fixp->fx_subsy);
if (OUTPUT_FLAVOR != bfd_target_ecoff_flavour)
- as_fatal ("Double check fx_r_type in tc-mips.c:tc_gen_reloc");
+ as_fatal (_("Double check fx_r_type in tc-mips.c:tc_gen_reloc"));
fixp->fx_r_type = BFD_RELOC_GPREL32;
}
+ else if (fixp->fx_pcrel == 0 || OUTPUT_FLAVOR == bfd_target_elf_flavour)
+ reloc->addend = fixp->fx_addnumber;
else if (fixp->fx_r_type == BFD_RELOC_PCREL_LO16)
{
/* We use a special addend for an internal RELLO reloc. */
- if (fixp->fx_addsy->bsym->flags & BSF_SECTION_SYM)
+ if (symbol_section_p (fixp->fx_addsy))
reloc->addend = reloc->address - S_GET_VALUE (fixp->fx_subsy);
else
reloc->addend = fixp->fx_addnumber + reloc->address;
/* We use a special addend for an internal RELHI reloc. The
reloc is relative to the RELLO; adjust the addend
accordingly. */
- if (fixp->fx_addsy->bsym->flags & BSF_SECTION_SYM)
+ if (symbol_section_p (fixp->fx_addsy))
reloc->addend = (fixp->fx_next->fx_frag->fr_address
+ fixp->fx_next->fx_where
- S_GET_VALUE (fixp->fx_subsy));
+ fixp->fx_next->fx_frag->fr_address
+ fixp->fx_next->fx_where);
}
- else if (fixp->fx_pcrel == 0)
- reloc->addend = fixp->fx_addnumber;
else
{
if (OUTPUT_FLAVOR != bfd_target_aout_flavour)
reloc->address = fixp->fx_frag->fr_address + fixp->fx_where;
reloc2 = retval[1] = (arelent *) xmalloc (sizeof (arelent));
retval[2] = NULL;
- reloc2->sym_ptr_ptr = &fixp->fx_addsy->bsym;
+ reloc2->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *));
+ *reloc2->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
reloc2->address = (reloc->address
+ (RELAX_RELOC2 (fixp->fx_frag->fr_subtype)
- RELAX_RELOC1 (fixp->fx_frag->fr_subtype)));
abort ();
}
+ /* Since MIPS ELF uses Rel instead of Rela, encode the vtable entry
+ to be used in the relocation's section offset. */
+ if (fixp->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
+ {
+ reloc->address = reloc->addend;
+ reloc->addend = 0;
+ }
+
/* Since DIFF_EXPR_OK is defined in tc-mips.h, it is possible that
fixup_segment converted a non-PC relative reloc into a PC
relative reloc. In such a case, we need to convert the reloc
break;
default:
as_bad_where (fixp->fx_file, fixp->fx_line,
- "Cannot make %s relocation PC relative",
+ _("Cannot make %s relocation PC relative"),
bfd_get_reloc_code_name (code));
}
}
/* To support a PC relative reloc when generating embedded PIC code
for ECOFF, we use a Cygnus extension. We check for that here to
make sure that we don't let such a reloc escape normally. */
- if (OUTPUT_FLAVOR == bfd_target_ecoff_flavour
+ if ((OUTPUT_FLAVOR == bfd_target_ecoff_flavour
+ || OUTPUT_FLAVOR == bfd_target_elf_flavour)
&& code == BFD_RELOC_16_PCREL_S2
&& mips_pic != EMBEDDED_PIC)
reloc->howto = NULL;
if (reloc->howto == NULL)
{
as_bad_where (fixp->fx_file, fixp->fx_line,
- "Can not represent %s relocation in this object file format",
+ _("Can not represent %s relocation in this object file format"),
bfd_get_reloc_code_name (code));
retval[0] = NULL;
}
void
md_convert_frag (abfd, asec, fragp)
- bfd *abfd;
+ bfd *abfd ATTRIBUTE_UNUSED;
segT asec;
fragS *fragp;
{
ext = false;
}
- resolve_symbol_value (fragp->fr_symbol);
+ resolve_symbol_value (fragp->fr_symbol, 1);
val = S_GET_VALUE (fragp->fr_symbol);
if (op->pcrel)
{
if (type == 'p' || type == 'q')
{
addr += 2;
+ if (ext)
+ addr += 2;
/* Ignore the low bit in the target, since it will be
set for a text label. */
if ((val & 1) != 0)
else if (RELAX_MIPS16_DSLOT (fragp->fr_subtype))
addr -= 2;
- if (ext)
- addr += 2;
addr &= ~ (addressT) ((1 << op->shift) - 1);
val -= addr;
record_alignment (asec, op->shift);
}
+ if (ext
+ && (RELAX_MIPS16_JAL_DSLOT (fragp->fr_subtype)
+ || RELAX_MIPS16_DSLOT (fragp->fr_subtype)))
+ as_warn_where (fragp->fr_file, fragp->fr_line,
+ _("extended instruction in delay slot"));
+
buf = (bfd_byte *) (fragp->fr_literal + fragp->fr_fix);
if (target_big_endian)
l->next = insn_labels;
insn_labels = l;
}
-
-/* Decide whether a label is local. This is called by LOCAL_LABEL.
- In order to work with gcc when using mips-tfile, we must keep all
- local labels. However, in other cases, we want to discard them,
- since they are useless. */
-
-int
-mips_local_label (name)
- const char *name;
-{
-#ifndef NO_ECOFF_DEBUGGING
- if (ECOFF_DEBUGGING
- && mips_debug != 0
- && ! ecoff_debugging_seen)
- {
- /* We were called with -g, but we didn't see any debugging
- information. That may mean that gcc is smuggling debugging
- information through to mips-tfile, in which case we must
- generate all local labels. */
- return 0;
- }
-#endif
-
- /* Here it's OK to discard local labels. */
-
- return name[0] == '$';
-}
\f
#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
elf_elfheader (stdoutput)->e_flags |= EF_MIPS_NOREORDER;
if (mips_pic != NO_PIC)
elf_elfheader (stdoutput)->e_flags |= EF_MIPS_PIC;
+
+ /* Set the MIPS ELF ABI flags. */
+ if (mips_abi_string == 0)
+ ;
+ else if (strcmp (mips_abi_string,"32") == 0)
+ elf_elfheader (stdoutput)->e_flags |= E_MIPS_ABI_O32;
+ else if (strcmp (mips_abi_string,"o64") == 0)
+ elf_elfheader (stdoutput)->e_flags |= E_MIPS_ABI_O64;
+ else if (strcmp (mips_abi_string,"eabi") == 0)
+ {
+ if (mips_eabi64)
+ elf_elfheader (stdoutput)->e_flags |= E_MIPS_ABI_EABI64;
+ else
+ elf_elfheader (stdoutput)->e_flags |= E_MIPS_ABI_EABI32;
+ }
+
+ if (mips_32bitmode)
+ elf_elfheader (stdoutput)->e_flags |= EF_MIPS_32BITMODE;
}
#endif /* OBJ_ELF || OBJ_MAYBE_ELF */
\f
-/* These functions should really be defined by the object file format,
- since they are related to debugging information. However, this
- code has to work for the a.out format, which does not define them,
- so we provide simple versions here. These don't actually generate
- any debugging information, but they do simple checking and someday
- somebody may make them useful. */
-
-typedef struct loc
-{
- struct loc *loc_next;
- unsigned long loc_fileno;
- unsigned long loc_lineno;
- unsigned long loc_offset;
- unsigned short loc_delta;
- unsigned short loc_count;
-#if 0
- fragS *loc_frag;
-#endif
-}
-locS;
-
typedef struct proc
{
- struct proc *proc_next;
- struct symbol *proc_isym;
- struct symbol *proc_end;
- unsigned long proc_reg_mask;
- unsigned long proc_reg_offset;
- unsigned long proc_fpreg_mask;
- unsigned long proc_fpreg_offset;
- unsigned long proc_frameoffset;
- unsigned long proc_framereg;
- unsigned long proc_pcreg;
- locS *proc_iline;
- struct file *proc_file;
- int proc_index;
+ symbolS *isym;
+ unsigned long reg_mask;
+ unsigned long reg_offset;
+ unsigned long fpreg_mask;
+ unsigned long fpreg_offset;
+ unsigned long frame_offset;
+ unsigned long frame_reg;
+ unsigned long pc_reg;
}
procS;
-typedef struct file
- {
- struct file *file_next;
- unsigned long file_fileno;
- struct symbol *file_symbol;
- struct symbol *file_end;
- struct proc *file_proc;
- int file_numprocs;
- }
-fileS;
-
-static struct obstack proc_frags;
-static procS *proc_lastP;
-static procS *proc_rootP;
+static procS cur_proc;
+static procS *cur_proc_ptr;
static int numprocs;
+/* When we align code in the .text section of mips16, use the correct two
+ byte nop pattern of 0x6500 (move $0,$0) */
+
+int
+mips_do_align (n, fill, len, max)
+ int n;
+ const char *fill;
+ int len ATTRIBUTE_UNUSED;
+ int max;
+{
+ if (fill == NULL
+ && subseg_text_p (now_seg)
+ && n > 1
+ && mips_opts.mips16)
+ {
+ static const unsigned char be_nop[] = { 0x65, 0x00 };
+ static const unsigned char le_nop[] = { 0x00, 0x65 };
+
+ frag_align (1, 0, 0);
+
+ if (target_big_endian)
+ frag_align_pattern (n, be_nop, 2, max);
+ else
+ frag_align_pattern (n, le_nop, 2, max);
+ return 1;
+ }
+
+ return 0;
+}
+
static void
md_obj_begin ()
{
- obstack_begin (&proc_frags, 0x2000);
}
static void
md_obj_end ()
{
/* check for premature end, nesting errors, etc */
- if (proc_lastP && proc_lastP->proc_end == NULL)
- as_warn ("missing `.end' at end of assembly");
+ if (cur_proc_ptr)
+ as_warn (_("missing `.end' at end of assembly"));
}
static long
++input_line_pointer;
negative = 1;
}
- if (!isdigit (*input_line_pointer))
- as_bad ("Expected simple number.");
+ if (!isdigit ((unsigned char) *input_line_pointer))
+ as_bad (_("Expected simple number."));
if (input_line_pointer[0] == '0')
{
if (input_line_pointer[1] == 'x')
{
input_line_pointer += 2;
- while (isxdigit (*input_line_pointer))
+ while (isxdigit ((unsigned char) *input_line_pointer))
{
val <<= 4;
val |= hex_value (*input_line_pointer++);
else
{
++input_line_pointer;
- while (isdigit (*input_line_pointer))
+ while (isdigit ((unsigned char) *input_line_pointer))
{
val <<= 3;
val |= *input_line_pointer++ - '0';
return negative ? -val : val;
}
}
- if (!isdigit (*input_line_pointer))
+ if (!isdigit ((unsigned char) *input_line_pointer))
{
- printf (" *input_line_pointer == '%c' 0x%02x\n",
+ printf (_(" *input_line_pointer == '%c' 0x%02x\n"),
*input_line_pointer, *input_line_pointer);
- as_warn ("Invalid number");
+ as_warn (_("Invalid number"));
return -1;
}
- while (isdigit (*input_line_pointer))
+ while (isdigit ((unsigned char) *input_line_pointer))
{
val *= 10;
val += *input_line_pointer++ - '0';
static void
s_file (x)
- int x;
+ int x ATTRIBUTE_UNUSED;
{
int line;
/* The .end directive. */
static void
-s_mipsend (x)
- int x;
+s_mips_end (x)
+ int x ATTRIBUTE_UNUSED;
{
symbolS *p;
+ int maybe_text;
if (!is_end_of_line[(unsigned char) *input_line_pointer])
{
}
else
p = NULL;
- if (now_seg != text_section)
- as_warn (".end not in text section");
- if (!proc_lastP)
+
+#ifdef BFD_ASSEMBLER
+ if ((bfd_get_section_flags (stdoutput, now_seg) & SEC_CODE) != 0)
+ maybe_text = 1;
+ else
+ maybe_text = 0;
+#else
+ if (now_seg != data_section && now_seg != bss_section)
+ maybe_text = 1;
+ else
+ maybe_text = 0;
+#endif
+
+ if (!maybe_text)
+ as_warn (_(".end not in text section"));
+
+ if (!cur_proc_ptr)
{
- as_warn (".end and no .ent seen yet.");
+ as_warn (_(".end directive without a preceding .ent directive."));
+ demand_empty_rest_of_line ();
return;
}
if (p != NULL)
{
assert (S_GET_NAME (p));
- if (strcmp (S_GET_NAME (p), S_GET_NAME (proc_lastP->proc_isym)))
- as_warn (".end symbol does not match .ent symbol.");
+ if (strcmp (S_GET_NAME (p), S_GET_NAME (cur_proc_ptr->isym)))
+ as_warn (_(".end symbol does not match .ent symbol."));
}
+ else
+ as_warn (_(".end directive missing or unknown symbol"));
+
+#ifdef MIPS_STABS_ELF
+ {
+ segT saved_seg = now_seg;
+ subsegT saved_subseg = now_subseg;
+ fragS *saved_frag = frag_now;
+ valueT dot;
+ segT seg;
+ expressionS exp;
+ char *fragp;
+
+ dot = frag_now_fix ();
+
+#ifdef md_flush_pending_output
+ md_flush_pending_output ();
+#endif
+
+ assert (pdr_seg);
+ subseg_set (pdr_seg, 0);
- proc_lastP->proc_end = (symbolS *) 1;
+ /* Write the symbol */
+ exp.X_op = O_symbol;
+ exp.X_add_symbol = p;
+ exp.X_add_number = 0;
+ emit_expr (&exp, 4);
+
+ fragp = frag_more (7*4);
+
+ md_number_to_chars (fragp, (valueT) cur_proc_ptr->reg_mask, 4);
+ md_number_to_chars (fragp + 4, (valueT) cur_proc_ptr->reg_offset, 4);
+ md_number_to_chars (fragp + 8, (valueT) cur_proc_ptr->fpreg_mask, 4);
+ md_number_to_chars (fragp +12, (valueT) cur_proc_ptr->fpreg_offset, 4);
+ md_number_to_chars (fragp +16, (valueT) cur_proc_ptr->frame_offset, 4);
+ md_number_to_chars (fragp +20, (valueT) cur_proc_ptr->frame_reg, 4);
+ md_number_to_chars (fragp +24, (valueT) cur_proc_ptr->pc_reg, 4);
+
+ subseg_set (saved_seg, saved_subseg);
+ }
+#endif
+
+ cur_proc_ptr = NULL;
}
/* The .aent and .ent directives. */
static void
-s_ent (aent)
+s_mips_ent (aent)
int aent;
{
int number = 0;
- procS *procP;
symbolS *symbolP;
+ int maybe_text;
symbolP = get_symbol ();
if (*input_line_pointer == ',')
input_line_pointer++;
SKIP_WHITESPACE ();
- if (isdigit (*input_line_pointer) || *input_line_pointer == '-')
+ if (isdigit ((unsigned char) *input_line_pointer)
+ || *input_line_pointer == '-')
number = get_number ();
- if (now_seg != text_section)
- as_warn (".ent or .aent not in text section.");
- if (!aent && proc_lastP && proc_lastP->proc_end == NULL)
- as_warn ("missing `.end'");
+#ifdef BFD_ASSEMBLER
+ if ((bfd_get_section_flags (stdoutput, now_seg) & SEC_CODE) != 0)
+ maybe_text = 1;
+ else
+ maybe_text = 0;
+#else
+ if (now_seg != data_section && now_seg != bss_section)
+ maybe_text = 1;
+ else
+ maybe_text = 0;
+#endif
+
+ if (!maybe_text)
+ as_warn (_(".ent or .aent not in text section."));
+
+ if (!aent && cur_proc_ptr)
+ as_warn (_("missing `.end'"));
if (!aent)
{
- procP = (procS *) obstack_alloc (&proc_frags, sizeof (*procP));
- procP->proc_isym = symbolP;
- procP->proc_reg_mask = 0;
- procP->proc_reg_offset = 0;
- procP->proc_fpreg_mask = 0;
- procP->proc_fpreg_offset = 0;
- procP->proc_frameoffset = 0;
- procP->proc_framereg = 0;
- procP->proc_pcreg = 0;
- procP->proc_end = NULL;
- procP->proc_next = NULL;
- if (proc_lastP)
- proc_lastP->proc_next = procP;
- else
- proc_rootP = procP;
- proc_lastP = procP;
+ cur_proc_ptr = &cur_proc;
+ memset (cur_proc_ptr, '\0', sizeof (procS));
+
+ cur_proc_ptr->isym = symbolP;
+
+ symbol_get_bfdsym (symbolP)->flags |= BSF_FUNCTION;
+
numprocs++;
}
+
demand_empty_rest_of_line ();
}
-/* The .frame directive. */
+/* The .frame directive. If the mdebug section is present (IRIX 5 native)
+ then ecoff.c (ecoff_directive_frame) is used. For embedded targets,
+ s_mips_frame is used so that we can set the PDR information correctly.
+ We can't use the ecoff routines because they make reference to the ecoff
+ symbol table (in the mdebug section). */
-#if 0
static void
-s_frame (x)
- int x;
+s_mips_frame (ignore)
+ int ignore;
{
- char str[100];
- symbolS *symP;
- int frame_reg;
- int frame_off;
- int pcreg;
+#ifdef MIPS_STABS_ELF
- frame_reg = tc_get_register (1);
- if (*input_line_pointer == ',')
- input_line_pointer++;
- frame_off = get_absolute_expression ();
- if (*input_line_pointer == ',')
- input_line_pointer++;
- pcreg = tc_get_register (0);
-
- /* bob third eye */
- assert (proc_rootP);
- proc_rootP->proc_framereg = frame_reg;
- proc_rootP->proc_frameoffset = frame_off;
- proc_rootP->proc_pcreg = pcreg;
- /* bob macho .frame */
-
- /* We don't have to write out a frame stab for unoptimized code. */
- if (!(frame_reg == FP && frame_off == 0))
- {
- if (!proc_lastP)
- as_warn ("No .ent for .frame to use.");
- (void) sprintf (str, "R%d;%d", frame_reg, frame_off);
- symP = symbol_new (str, N_VFP, 0, frag_now);
- S_SET_TYPE (symP, N_RMASK);
- S_SET_OTHER (symP, 0);
- S_SET_DESC (symP, 0);
- symP->sy_forward = proc_lastP->proc_isym;
- /* bob perhaps I should have used pseudo set */
+ long val;
+
+ if (cur_proc_ptr == (procS *) NULL)
+ {
+ as_warn (_(".frame outside of .ent"));
+ demand_empty_rest_of_line ();
+ return;
+ }
+
+ cur_proc_ptr->frame_reg = tc_get_register (1);
+
+ SKIP_WHITESPACE ();
+ if (*input_line_pointer++ != ','
+ || get_absolute_expression_and_terminator (&val) != ',')
+ {
+ as_warn (_("Bad .frame directive"));
+ --input_line_pointer;
+ demand_empty_rest_of_line ();
+ return;
}
+
+ cur_proc_ptr->frame_offset = val;
+ cur_proc_ptr->pc_reg = tc_get_register (0);
+
demand_empty_rest_of_line ();
+#else
+ s_ignore (ignore);
+#endif /* MIPS_STABS_ELF */
}
-#endif
-/* The .fmask and .mask directives. */
+/* The .fmask and .mask directives. If the mdebug section is present
+ (IRIX 5 native) then ecoff.c (ecoff_directive_mask) is used. For
+ embedded targets, s_mips_mask is used so that we can set the PDR
+ information correctly. We can't use the ecoff routines because they
+ make reference to the ecoff symbol table (in the mdebug section). */
-#if 0
static void
-s_mask (reg_type)
+s_mips_mask (reg_type)
char reg_type;
{
- char str[100], *strP;
- symbolS *symP;
- int i;
- unsigned int mask;
- int off;
+#ifdef MIPS_STABS_ELF
+ long mask, off;
+
+ if (cur_proc_ptr == (procS *) NULL)
+ {
+ as_warn (_(".mask/.fmask outside of .ent"));
+ demand_empty_rest_of_line ();
+ return;
+ }
+
+ if (get_absolute_expression_and_terminator (&mask) != ',')
+ {
+ as_warn (_("Bad .mask/.fmask directive"));
+ --input_line_pointer;
+ demand_empty_rest_of_line ();
+ return;
+ }
- mask = get_number ();
- if (*input_line_pointer == ',')
- input_line_pointer++;
off = get_absolute_expression ();
- /* bob only for coff */
- assert (proc_rootP);
if (reg_type == 'F')
{
- proc_rootP->proc_fpreg_mask = mask;
- proc_rootP->proc_fpreg_offset = off;
+ cur_proc_ptr->fpreg_mask = mask;
+ cur_proc_ptr->fpreg_offset = off;
}
else
{
- proc_rootP->proc_reg_mask = mask;
- proc_rootP->proc_reg_offset = off;
+ cur_proc_ptr->reg_mask = mask;
+ cur_proc_ptr->reg_offset = off;
}
- /* bob macho .mask + .fmask */
-
- /* We don't have to write out a mask stab if no saved regs. */
- if (!(mask == 0))
- {
- if (!proc_lastP)
- as_warn ("No .ent for .mask to use.");
- strP = str;
- for (i = 0; i < 32; i++)
- {
- if (mask % 2)
- {
- sprintf (strP, "%c%d,", reg_type, i);
- strP += strlen (strP);
- }
- mask /= 2;
- }
- sprintf (strP, ";%d,", off);
- symP = symbol_new (str, N_RMASK, 0, frag_now);
- S_SET_TYPE (symP, N_RMASK);
- S_SET_OTHER (symP, 0);
- S_SET_DESC (symP, 0);
- symP->sy_forward = proc_lastP->proc_isym;
- /* bob perhaps I should have used pseudo set */
- }
+ demand_empty_rest_of_line ();
+#else
+ s_ignore (reg_type);
+#endif /* MIPS_STABS_ELF */
}
-#endif
/* The .loc directive. */