/* tc-sh.c -- Assemble code for the Hitachi Super-H
-
- Copyright (C) 1993 Free Software Foundation.
+ Copyright (C) 1993, 94, 95, 96, 97, 98, 1999 Free Software Foundation.
This file is part of GAS, the GNU Assembler.
You should have received a copy of the GNU General Public License
along with GAS; see the file COPYING. If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
+ the Free Software Foundation, 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
/*
Written By Steve Chamberlain
const char line_separator_chars[] = ";";
const char line_comment_chars[] = "!#";
+static void s_uses PARAMS ((int));
+
+static void sh_count_relocs PARAMS ((bfd *, segT, PTR));
+static void sh_frob_section PARAMS ((bfd *, segT, PTR));
+
/* This table describes all the machine specific pseudo-ops the assembler
has to support. The fields are:
pseudo-op name without dot
void cons ();
void s_align_bytes ();
+static void s_uacons PARAMS ((int));
int shl = 0;
-static void little()
+static void
+little (ignore)
+ int ignore;
{
shl = 1;
+ target_big_endian = 0;
}
const pseudo_typeS md_pseudo_table[] =
{"int", cons, 4},
{"word", cons, 2},
{"form", listing_psize, 0},
- {"little", little,0},
+ {"little", little, 0},
{"heading", listing_title, 0},
{"import", s_ignore, 0},
{"page", listing_eject, 0},
{"program", s_ignore, 0},
+ {"uses", s_uses, 0},
+ {"uaword", s_uacons, 2},
+ {"ualong", s_uacons, 4},
{0, 0, 0}
};
/*int md_reloc_size; */
-static int relax; /* set if -relax seen */
+int sh_relax; /* set if -relax seen */
+
+/* Whether -small was seen. */
+
+int sh_small;
const char EXP_CHARS[] = "eE";
#define ENCODE_RELAX(what,length) (((what) << 4) + (length))
#define GET_WHAT(x) ((x>>4))
-/* These are the two types of relaxable instrction */
+/* These are the three types of relaxable instrction */
#define COND_JUMP 1
-#define UNCOND_JUMP 2
+#define COND_JUMP_DELAY 2
+#define UNCOND_JUMP 3
+#define END 4
#define UNDEF_DISP 0
#define COND8 1
#define UNCOND12 1
#define UNCOND32 2
#define UNDEF_WORD_DISP 4
-#define END 5
#define UNCOND12 1
#define UNCOND32 2
-#define COND8_F 254
-#define COND8_M -256
+/* Branch displacements are from the address of the branch plus
+ four, thus all minimum and maximum values have 4 added to them. */
+#define COND8_F 258
+#define COND8_M -252
#define COND8_LENGTH 2
-#define COND12_F (4094 - 4) /* -4 since there are two extra */
-/* instructions needed */
-#define COND12_M -4096
+
+/* There is one extra instruction before the branch, so we must add
+ two more bytes to account for it. */
+#define COND12_F 4100
+#define COND12_M -4090
#define COND12_LENGTH 6
+
+#define COND12_DELAY_LENGTH 4
+
+/* ??? The minimum and maximum values are wrong, but this does not matter
+ since this relocation type is not supported yet. */
#define COND32_F (1<<30)
#define COND32_M -(1<<30)
#define COND32_LENGTH 14
-#define COND8_RANGE(x) ((x) > COND8_M && (x) < COND8_F)
-#define COND12_RANGE(x) ((x) > COND12_M && (x) < COND12_F)
-
-#define UNCOND12_F 4094
-#define UNCOND12_M -4096
+#define UNCOND12_F 4098
+#define UNCOND12_M -4092
#define UNCOND12_LENGTH 2
+/* ??? The minimum and maximum values are wrong, but this does not matter
+ since this relocation type is not supported yet. */
#define UNCOND32_F (1<<30)
#define UNCOND32_M -(1<<30)
#define UNCOND32_LENGTH 14
-
const relax_typeS md_relax_table[C (END, 0)] = {
{ 0 }, { 0 }, { 0 }, { 0 }, { 0 }, { 0 }, { 0 }, { 0 },
{ 0 }, { 0 }, { 0 }, { 0 }, { 0 }, { 0 }, { 0 }, { 0 },
{ 0 }, { 0 }, { 0 }, { 0 },
{ 0 }, { 0 }, { 0 }, { 0 }, { 0 }, { 0 }, { 0 }, { 0 },
+ { 0 },
+ /* C (COND_JUMP_DELAY, COND8) */
+ { COND8_F, COND8_M, COND8_LENGTH, C (COND_JUMP_DELAY, COND12) },
+ /* C (COND_JUMP_DELAY, COND12) */
+ { COND12_F, COND12_M, COND12_DELAY_LENGTH, C (COND_JUMP_DELAY, COND32), },
+ /* C (COND_JUMP_DELAY, COND32) */
+ { COND32_F, COND32_M, COND32_LENGTH, 0, },
+ { 0 }, { 0 }, { 0 }, { 0 },
+ { 0 }, { 0 }, { 0 }, { 0 }, { 0 }, { 0 }, { 0 }, { 0 },
+
{ 0 },
/* C (UNCOND_JUMP, UNCOND12) */
{ UNCOND12_F, UNCOND12_M, UNCOND12_LENGTH, C (UNCOND_JUMP, UNCOND32), },
sh_opcode_info *opcode;
char *prev_name = "";
+ if (! shl)
+ target_big_endian = 1;
+
opcode_hash_control = hash_new ();
/* Insert unique names into hash table */
static int reg_m;
static int reg_n;
+static int reg_b;
+
static expressionS immediate; /* absolute expression */
typedef struct
int *mode;
int *reg;
{
+ /* We use !isalnum for the next character after the register name, to
+ make sure that we won't accidentally recognize a symbol name such as
+ 'sram' as being a reference to the register 'sr'. */
+
+ if (src[0] == 'r')
+ {
+ if (src[1] >= '0' && src[1] <= '7' && strncmp(&src[2], "_bank", 5) == 0
+ && ! isalnum ((unsigned char) src[7]))
+ {
+ *mode = A_REG_B;
+ *reg = (src[1] - '0');
+ return 7;
+ }
+ }
+
if (src[0] == 'r')
{
if (src[1] == '1')
{
- if (src[2] >= '0' && src[2] <= '5')
+ if (src[2] >= '0' && src[2] <= '5'
+ && ! isalnum ((unsigned char) src[3]))
{
*mode = A_REG_N;
*reg = 10 + src[2] - '0';
return 3;
}
}
- if (src[1] >= '0' && src[1] <= '9')
+ if (src[1] >= '0' && src[1] <= '9'
+ && ! isalnum ((unsigned char) src[2]))
{
*mode = A_REG_N;
*reg = (src[1] - '0');
}
}
- if (src[0] == 's' && src[1] == 'r')
+ if (src[0] == 's'
+ && src[1] == 's'
+ && src[2] == 'r' && ! isalnum ((unsigned char) src[3]))
+ {
+ *mode = A_SSR;
+ return 3;
+ }
+
+ if (src[0] == 's' && src[1] == 'p' && src[2] == 'c'
+ && ! isalnum ((unsigned char) src[3]))
+ {
+ *mode = A_SPC;
+ return 3;
+ }
+
+ if (src[0] == 's' && src[1] == 'g' && src[2] == 'r'
+ && ! isalnum ((unsigned char) src[3]))
+ {
+ *mode = A_SGR;
+ return 3;
+ }
+
+ if (src[0] == 'd' && src[1] == 'b' && src[2] == 'r'
+ && ! isalnum ((unsigned char) src[3]))
+ {
+ *mode = A_DBR;
+ return 3;
+ }
+
+ if (src[0] == 's' && src[1] == 'r' && ! isalnum ((unsigned char) src[2]))
{
*mode = A_SR;
return 2;
}
- if (src[0] == 's' && src[1] == 'p')
+ if (src[0] == 's' && src[1] == 'p' && ! isalnum ((unsigned char) src[2]))
{
*mode = A_REG_N;
*reg = 15;
return 2;
}
- if (src[0] == 'p' && src[1] == 'r')
+ if (src[0] == 'p' && src[1] == 'r' && ! isalnum ((unsigned char) src[2]))
{
*mode = A_PR;
return 2;
}
- if (src[0] == 'p' && src[1] == 'c')
+ if (src[0] == 'p' && src[1] == 'c' && ! isalnum ((unsigned char) src[2]))
{
*mode = A_DISP_PC;
return 2;
}
- if (src[0] == 'g' && src[1] == 'b' && src[2] == 'r')
+ if (src[0] == 'g' && src[1] == 'b' && src[2] == 'r'
+ && ! isalnum ((unsigned char) src[3]))
{
*mode = A_GBR;
return 3;
}
- if (src[0] == 'v' && src[1] == 'b' && src[2] == 'r')
+ if (src[0] == 'v' && src[1] == 'b' && src[2] == 'r'
+ && ! isalnum ((unsigned char) src[3]))
{
*mode = A_VBR;
return 3;
}
- if (src[0] == 'm' && src[1] == 'a' && src[2] == 'c')
+ if (src[0] == 'm' && src[1] == 'a' && src[2] == 'c'
+ && ! isalnum ((unsigned char) src[4]))
{
if (src[3] == 'l')
{
return 4;
}
}
+ if (src[0] == 'f' && src[1] == 'r')
+ {
+ if (src[2] == '1')
+ {
+ if (src[3] >= '0' && src[3] <= '5'
+ && ! isalnum ((unsigned char) src[4]))
+ {
+ *mode = F_REG_N;
+ *reg = 10 + src[3] - '0';
+ return 4;
+ }
+ }
+ if (src[2] >= '0' && src[2] <= '9'
+ && ! isalnum ((unsigned char) src[3]))
+ {
+ *mode = F_REG_N;
+ *reg = (src[2] - '0');
+ return 3;
+ }
+ }
+ if (src[0] == 'd' && src[1] == 'r')
+ {
+ if (src[2] == '1')
+ {
+ if (src[3] >= '0' && src[3] <= '4' && ! ((src[3] - '0') & 1)
+ && ! isalnum ((unsigned char) src[4]))
+ {
+ *mode = D_REG_N;
+ *reg = 10 + src[3] - '0';
+ return 4;
+ }
+ }
+ if (src[2] >= '0' && src[2] <= '8' && ! ((src[2] - '0') & 1)
+ && ! isalnum ((unsigned char) src[3]))
+ {
+ *mode = D_REG_N;
+ *reg = (src[2] - '0');
+ return 3;
+ }
+ }
+ if (src[0] == 'x' && src[1] == 'd')
+ {
+ if (src[2] == '1')
+ {
+ if (src[3] >= '0' && src[3] <= '4' && ! ((src[3] - '0') & 1)
+ && ! isalnum ((unsigned char) src[4]))
+ {
+ *mode = X_REG_N;
+ *reg = 11 + src[3] - '0';
+ return 4;
+ }
+ }
+ if (src[2] >= '0' && src[2] <= '8' && ! ((src[2] - '0') & 1)
+ && ! isalnum ((unsigned char) src[3]))
+ {
+ *mode = X_REG_N;
+ *reg = (src[2] - '0') + 1;
+ return 3;
+ }
+ }
+ if (src[0] == 'f' && src[1] == 'v')
+ {
+ if (src[2] == '1'&& src[3] == '2' && ! isalnum ((unsigned char) src[4]))
+ {
+ *mode = V_REG_N;
+ *reg = 12;
+ return 4;
+ }
+ if ((src[2] == '0' || src[2] == '4' || src[2] == '8')
+ && ! isalnum ((unsigned char) src[3]))
+ {
+ *mode = V_REG_N;
+ *reg = (src[2] - '0');
+ return 3;
+ }
+ }
+ if (src[0] == 'f' && src[1] == 'p' && src[2] == 'u' && src[3] == 'l'
+ && ! isalnum ((unsigned char) src[4]))
+ {
+ *mode = FPUL_N;
+ return 4;
+ }
+
+ if (src[0] == 'f' && src[1] == 'p' && src[2] == 's' && src[3] == 'c'
+ && src[4] == 'r' && ! isalnum ((unsigned char) src[5]))
+ {
+ *mode = FPSCR_N;
+ return 5;
+ }
+
+ if (src[0] == 'x' && src[1] == 'm' && src[2] == 't' && src[3] == 'r'
+ && src[4] == 'x' && ! isalnum ((unsigned char) src[5]))
+ {
+ *mode = XMTRX_M4;
+ return 5;
+ }
return 0;
}
input_line_pointer = s;
expression (&immediate);
if (immediate.X_op == O_absent)
- as_bad ("missing operand");
+ as_bad (_("missing operand"));
new = input_line_pointer;
input_line_pointer = save;
return new;
len = parse_reg (src, &mode, &(op->reg));
if (mode != A_REG_N)
- as_bad ("illegal register after @-");
+ as_bad (_("illegal register after @-"));
op->type = A_DEC_N;
src += len;
src += len;
if (op->reg != 0)
{
- as_bad ("must be @(r0,...)");
+ as_bad (_("must be @(r0,...)"));
}
if (src[0] == ',')
src++;
}
else
{
- as_bad ("syntax error in @(r0,...)");
+ as_bad (_("syntax error in @(r0,...)"));
}
}
else
}
else
{
- as_bad ("syntax error in @(disp,[Rn, gbr, pc])");
+ as_bad (_("syntax error in @(disp,[Rn, gbr, pc])"));
}
}
else
{
- as_bad ("syntax error in @(disp,[Rn, gbr, pc])");
+ as_bad (_("syntax error in @(disp,[Rn, gbr, pc])"));
}
}
src += len;
if (src[0] != ')')
- as_bad ("expecting )");
+ as_bad (_("expecting )"));
else
src++;
}
src += parse_reg (src, &mode, &(op->reg));
if (mode != A_REG_N)
{
- as_bad ("illegal register after @");
+ as_bad (_("illegal register after @"));
}
if (src[0] == '+')
{
ptr++;
}
get_operand (&ptr, operand + 1);
+ if (info->arg[2])
+ {
+ if (*ptr == ',')
+ {
+ ptr++;
+ }
+ get_operand (&ptr, operand + 2);
+ }
+ else
+ {
+ operand[2].type = 0;
+ }
}
else
{
operand[1].type = 0;
+ operand[2].type = 0;
}
}
else
{
operand[0].type = 0;
operand[1].type = 0;
+ operand[2].type = 0;
}
return ptr;
}
{
sh_opcode_info *this_try = opcode;
char *name = opcode->name;
- int arg_to_test = 0;
int n = 0;
while (opcode->name)
{
for (n = 0; this_try->arg[n]; n++)
{
- sh_operand_info *user = operands + arg_to_test;
- sh_arg_type arg = this_try->arg[arg_to_test];
+ sh_operand_info *user = operands + n;
+ sh_arg_type arg = this_try->arg[n];
switch (arg)
{
case A_IMM:
if (user->type != A_R0_GBR || user->reg != 0)
goto fail;
break;
+ case F_FR0:
+ if (user->type != F_REG_N || user->reg != 0)
+ goto fail;
+ break;
case A_REG_N:
case A_INC_N:
case A_IND_N:
case A_IND_R0_REG_N:
case A_DISP_REG_N:
+ case F_REG_N:
+ case D_REG_N:
+ case X_REG_N:
+ case V_REG_N:
+ case FPUL_N:
+ case FPSCR_N:
/* Opcode needs rn */
if (user->type != arg)
goto fail;
reg_n = user->reg;
break;
+ case FD_REG_N:
+ if (user->type != F_REG_N && user->type != D_REG_N)
+ goto fail;
+ reg_n = user->reg;
+ break;
+ case DX_REG_N:
+ if (user->type != D_REG_N && user->type != X_REG_N)
+ goto fail;
+ reg_n = user->reg;
+ break;
case A_GBR:
case A_SR:
case A_VBR:
+ case A_SSR:
+ case A_SPC:
+ case A_SGR:
+ case A_DBR:
+ if (user->type != arg)
+ goto fail;
+ break;
+
+ case A_REG_B:
if (user->type != arg)
goto fail;
+ reg_b = user->reg;
break;
case A_REG_M:
goto fail;
reg_m = user->reg;
break;
+
+ case F_REG_M:
+ case D_REG_M:
+ case X_REG_M:
+ case V_REG_M:
+ case FPUL_M:
+ case FPSCR_M:
+ /* Opcode needs rn */
+ if (user->type != arg - F_REG_M + F_REG_N)
+ goto fail;
+ reg_m = user->reg;
+ break;
+ case DX_REG_M:
+ if (user->type != D_REG_N && user->type != X_REG_N)
+ goto fail;
+ reg_m = user->reg;
+ break;
+ case XMTRX_M4:
+ if (user->type != XMTRX_M4)
+ goto fail;
+ reg_m = 4;
+ break;
+
default:
- printf ("unhandled %d\n", arg);
+ printf (_("unhandled %d\n"), arg);
goto fail;
}
- /* If we did 0, test 1 next, else 0 */
- arg_to_test = 1 - arg_to_test;
}
return this_try;
fail:;
|| operand->X_add_number < low
|| operand->X_add_number > high)
{
- as_bad ("operand must be absolute in range %d..%d", low, high);
+ as_bad (_("operand must be absolute in range %d..%d"), low, high);
}
return operand->X_add_number;
}
{
fix_new_exp (frag_now,
where - frag_now->fr_literal,
- 4,
+ 2,
&immediate,
pcrel,
how);
-
}
static void
build_relax (opcode)
sh_opcode_info *opcode;
{
- int len;
- int high_byte = shl ? 1 : 0 ;
+ int high_byte = target_big_endian ? 0 : 1;
char *p;
if (opcode->arg[0] == A_BDISP8)
{
+ int what = (opcode->nibbles[1] & 4) ? COND_JUMP_DELAY : COND_JUMP;
p = frag_var (rs_machine_dependent,
- md_relax_table[C (COND_JUMP, COND32)].rlx_length,
- len = md_relax_table[C (COND_JUMP, COND8)].rlx_length,
- C (COND_JUMP, 0),
+ md_relax_table[C (what, COND32)].rlx_length,
+ md_relax_table[C (what, COND8)].rlx_length,
+ C (what, 0),
immediate.X_add_symbol,
immediate.X_add_number,
0);
{
p = frag_var (rs_machine_dependent,
md_relax_table[C (UNCOND_JUMP, UNCOND32)].rlx_length,
- len = md_relax_table[C (UNCOND_JUMP, UNCOND12)].rlx_length,
+ md_relax_table[C (UNCOND_JUMP, UNCOND12)].rlx_length,
C (UNCOND_JUMP, 0),
immediate.X_add_symbol,
immediate.X_add_number,
int index;
char nbuf[4];
char *output = frag_more (2);
- int low_byte = shl ? 0 : 1;
+ int low_byte = target_big_endian ? 1 : 0;
nbuf[0] = 0;
nbuf[1] = 0;
nbuf[2] = 0;
case REG_M:
nbuf[index] = reg_m;
break;
+ case REG_NM:
+ nbuf[index] = reg_n | (reg_m >> 2);
+ break;
+ case REG_B:
+ nbuf[index] = reg_b | 0x08;
+ break;
case DISP_4:
- insert (output + low_byte, R_SH_IMM4, 0);
+ insert (output + low_byte, BFD_RELOC_SH_IMM4, 0);
break;
case IMM_4BY4:
- insert (output + low_byte, R_SH_IMM4BY4, 0);
+ insert (output + low_byte, BFD_RELOC_SH_IMM4BY4, 0);
break;
case IMM_4BY2:
- insert (output + low_byte, R_SH_IMM4BY2, 0);
+ insert (output + low_byte, BFD_RELOC_SH_IMM4BY2, 0);
break;
case IMM_4:
- insert (output + low_byte, R_SH_IMM4, 0);
+ insert (output + low_byte, BFD_RELOC_SH_IMM4, 0);
break;
case IMM_8BY4:
- insert (output + low_byte, R_SH_IMM8BY4, 0);
+ insert (output + low_byte, BFD_RELOC_SH_IMM8BY4, 0);
break;
case IMM_8BY2:
- insert (output + low_byte, R_SH_IMM8BY2, 0);
+ insert (output + low_byte, BFD_RELOC_SH_IMM8BY2, 0);
break;
case IMM_8:
- insert (output + low_byte, R_SH_IMM8, 0);
+ insert (output + low_byte, BFD_RELOC_SH_IMM8, 0);
break;
case PCRELIMM_8BY4:
- insert (output, R_SH_PCRELIMM8BY4, 1);
+ insert (output, BFD_RELOC_SH_PCRELIMM8BY4, 1);
break;
case PCRELIMM_8BY2:
- insert (output, R_SH_PCRELIMM8BY2, 1);
+ insert (output, BFD_RELOC_SH_PCRELIMM8BY2, 1);
break;
default:
- printf ("failed for %d\n", i);
+ printf (_("failed for %d\n"), i);
}
}
}
- if (shl) {
+ if (! target_big_endian) {
output[1] = (nbuf[0] << 4) | (nbuf[1]);
output[0] = (nbuf[2] << 4) | (nbuf[3]);
}
{
unsigned char *op_start;
unsigned char *op_end;
- sh_operand_info operand[2];
+ sh_operand_info operand[3];
sh_opcode_info *opcode;
char name[20];
int nlen = 0;
&& !is_end_of_line[*op_end] && *op_end != ' ';
op_end++)
{
- name[nlen] = op_start[nlen];
+ unsigned char c = op_start[nlen];
+
+ /* The machine independent code will convert CMP/EQ into cmp/EQ
+ because it thinks the '/' is the end of the symbol. Instead of
+ hacking up the machine independent code, we just deal with it
+ here. */
+ c = isupper (c) ? tolower (c) : c;
+ name[nlen] = c;
nlen++;
}
name[nlen] = 0;
if (nlen == 0)
{
- as_bad ("can't find opcode ");
+ as_bad (_("can't find opcode "));
}
opcode = (sh_opcode_info *) hash_find (opcode_hash_control, name);
if (opcode == NULL)
{
- as_bad ("unknown opcode");
+ as_bad (_("unknown opcode"));
return;
}
+ if (sh_relax
+ && ! seg_info (now_seg)->tc_segment_info_data.in_code)
+ {
+ /* Output a CODE reloc to tell the linker that the following
+ bytes are instructions, not data. */
+ fix_new (frag_now, frag_now_fix (), 2, &abs_symbol, 0, 0,
+ BFD_RELOC_SH_CODE);
+ seg_info (now_seg)->tc_segment_info_data.in_code = 1;
+ }
+
if (opcode->arg[0] == A_BDISP12
|| opcode->arg[0] == A_BDISP8)
{
}
else
{
- if (opcode->arg[0] != A_END)
+ if (opcode->arg[0] == A_END)
{
- get_operands (opcode, op_end, operand);
+ /* Ignore trailing whitespace. If there is any, it has already
+ been compressed to a single space. */
+ if (*op_end == ' ')
+ op_end++;
+ }
+ else
+ {
+ op_end = get_operands (opcode, op_end, operand);
}
opcode = get_specific (opcode, operand);
where[0] = 0x0;
where[1] = 0x0;
- as_bad ("invalid operands for opcode");
+ as_bad (_("invalid operands for opcode"));
return;
}
+ if (*op_end)
+ as_bad (_("excess operands: '%s'"), op_end);
+
build_Mytes (opcode, operand);
}
}
+/* This routine is called each time a label definition is seen. It
+ emits a BFD_RELOC_SH_LABEL reloc if necessary. */
+
void
-DEFUN (tc_crawl_symbol_chain, (headers),
- object_headers * headers)
+sh_frob_label ()
+{
+ static fragS *last_label_frag;
+ static int last_label_offset;
+
+ if (sh_relax
+ && seg_info (now_seg)->tc_segment_info_data.in_code)
+ {
+ int offset;
+
+ offset = frag_now_fix ();
+ if (frag_now != last_label_frag
+ || offset != last_label_offset)
+ {
+ fix_new (frag_now, offset, 2, &abs_symbol, 0, 0, BFD_RELOC_SH_LABEL);
+ last_label_frag = frag_now;
+ last_label_offset = offset;
+ }
+ }
+}
+
+/* This routine is called when the assembler is about to output some
+ data. It emits a BFD_RELOC_SH_DATA reloc if necessary. */
+
+void
+sh_flush_pending_output ()
{
- printf ("call to tc_crawl_symbol_chain \n");
+ if (sh_relax
+ && seg_info (now_seg)->tc_segment_info_data.in_code)
+ {
+ fix_new (frag_now, frag_now_fix (), 2, &abs_symbol, 0, 0,
+ BFD_RELOC_SH_DATA);
+ seg_info (now_seg)->tc_segment_info_data.in_code = 0;
+ }
}
symbolS *
return 0;
}
+#ifdef OBJ_COFF
+
+void
+DEFUN (tc_crawl_symbol_chain, (headers),
+ object_headers * headers)
+{
+ printf (_("call to tc_crawl_symbol_chain \n"));
+}
+
void
DEFUN (tc_headers_hook, (headers),
object_headers * headers)
{
- printf ("call to tc_headers_hook \n");
+ printf (_("call to tc_headers_hook \n"));
}
+#endif
+
/* Various routines to kill one day */
/* Equal to MAX_PRECISION in atof-ieee.c */
#define MAX_LITTLENUMS 6
default:
*sizeP = 0;
- return "bad call to md_atof";
+ return _("bad call to md_atof");
}
t = atof_ieee (input_line_pointer, type, words);
*sizeP = prec * 2;
- if (shl)
+ if (! target_big_endian)
{
for (i = prec - 1; i >= 0; i--)
{
return NULL;
}
+/* Handle the .uses pseudo-op. This pseudo-op is used just before a
+ call instruction. It refers to a label of the instruction which
+ loads the register which the call uses. We use it to generate a
+ special reloc for the linker. */
+
+static void
+s_uses (ignore)
+ int ignore;
+{
+ expressionS ex;
+ if (! sh_relax)
+ as_warn (_(".uses pseudo-op seen when not relaxing"));
+
+ expression (&ex);
+
+ if (ex.X_op != O_symbol || ex.X_add_number != 0)
+ {
+ as_bad (_("bad .uses format"));
+ ignore_rest_of_line ();
+ return;
+ }
+
+ fix_new_exp (frag_now, frag_now_fix (), 2, &ex, 1, BFD_RELOC_SH_USES);
+
+ demand_empty_rest_of_line ();
+}
\f
CONST char *md_shortopts = "";
struct option md_longopts[] = {
#define OPTION_RELAX (OPTION_MD_BASE)
-#define OPTION_LITTLE (OPTION_MD_BASE+1)
+#define OPTION_LITTLE (OPTION_MD_BASE + 1)
+#define OPTION_SMALL (OPTION_LITTLE + 1)
{"relax", no_argument, NULL, OPTION_RELAX},
{"little", no_argument, NULL, OPTION_LITTLE},
+ {"small", no_argument, NULL, OPTION_SMALL},
{NULL, no_argument, NULL, 0}
};
size_t md_longopts_size = sizeof(md_longopts);
switch (c)
{
case OPTION_RELAX:
- relax = 1;
+ sh_relax = 1;
break;
+
case OPTION_LITTLE:
shl = 1;
+ target_big_endian = 0;
+ break;
+
+ case OPTION_SMALL:
+ sh_small = 1;
break;
default:
md_show_usage (stream)
FILE *stream;
{
- fprintf(stream, "\
+ fprintf(stream, _("\
SH options:\n\
--relax alter jump instructions for long displacements\n");
+-little generate little endian code\n\
+-relax alter jump instructions for long displacements\n\
+-small align sections to 4 byte boundaries, not 16\n"));
}
\f
-int md_short_jump_size;
-
void
tc_Nout_fix_to_chars ()
{
- printf ("call to tc_Nout_fix_to_chars \n");
+ printf (_("call to tc_Nout_fix_to_chars \n"));
abort ();
}
-void
-md_create_short_jump (ptr, from_Nddr, to_Nddr, frag, to_symbol)
- char *ptr;
- addressT from_Nddr;
- addressT to_Nddr;
- fragS *frag;
- symbolS *to_symbol;
+/* This struct is used to pass arguments to sh_count_relocs through
+ bfd_map_over_sections. */
+
+struct sh_count_relocs
+{
+ /* Symbol we are looking for. */
+ symbolS *sym;
+ /* Count of relocs found. */
+ int count;
+};
+
+/* Count the number of fixups in a section which refer to a particular
+ symbol. When using BFD_ASSEMBLER, this is called via
+ bfd_map_over_sections. */
+
+/*ARGSUSED*/
+static void
+sh_count_relocs (abfd, sec, data)
+ bfd *abfd;
+ segT sec;
+ PTR data;
+{
+ struct sh_count_relocs *info = (struct sh_count_relocs *) data;
+ segment_info_type *seginfo;
+ symbolS *sym;
+ fixS *fix;
+
+ seginfo = seg_info (sec);
+ if (seginfo == NULL)
+ return;
+
+ sym = info->sym;
+ for (fix = seginfo->fix_root; fix != NULL; fix = fix->fx_next)
+ {
+ if (fix->fx_addsy == sym)
+ {
+ ++info->count;
+ fix->fx_tcbit = 1;
+ }
+ }
+}
+
+/* Handle the count relocs for a particular section. When using
+ BFD_ASSEMBLER, this is called via bfd_map_over_sections. */
+
+/*ARGSUSED*/
+static void
+sh_frob_section (abfd, sec, ignore)
+ bfd *abfd;
+ segT sec;
+ PTR ignore;
{
- as_fatal ("failed sanity check.");
+ segment_info_type *seginfo;
+ fixS *fix;
+
+ seginfo = seg_info (sec);
+ if (seginfo == NULL)
+ return;
+
+ for (fix = seginfo->fix_root; fix != NULL; fix = fix->fx_next)
+ {
+ symbolS *sym;
+ bfd_vma val;
+ fixS *fscan;
+ struct sh_count_relocs info;
+
+ if (fix->fx_r_type != BFD_RELOC_SH_USES)
+ continue;
+
+ /* The BFD_RELOC_SH_USES reloc should refer to a defined local
+ symbol in the same section. */
+ sym = fix->fx_addsy;
+ if (sym == NULL
+ || fix->fx_subsy != NULL
+ || fix->fx_addnumber != 0
+ || S_GET_SEGMENT (sym) != sec
+#if ! defined (BFD_ASSEMBLER) && defined (OBJ_COFF)
+ || S_GET_STORAGE_CLASS (sym) == C_EXT
+#endif
+ || S_IS_EXTERNAL (sym))
+ {
+ as_warn_where (fix->fx_file, fix->fx_line,
+ _(".uses does not refer to a local symbol in the same section"));
+ continue;
+ }
+
+ /* Look through the fixups again, this time looking for one
+ at the same location as sym. */
+ val = S_GET_VALUE (sym);
+ for (fscan = seginfo->fix_root;
+ fscan != NULL;
+ fscan = fscan->fx_next)
+ if (val == fscan->fx_frag->fr_address + fscan->fx_where
+ && fscan->fx_r_type != BFD_RELOC_SH_ALIGN
+ && fscan->fx_r_type != BFD_RELOC_SH_CODE
+ && fscan->fx_r_type != BFD_RELOC_SH_DATA
+ && fscan->fx_r_type != BFD_RELOC_SH_LABEL)
+ break;
+ if (fscan == NULL)
+ {
+ as_warn_where (fix->fx_file, fix->fx_line,
+ _("can't find fixup pointed to by .uses"));
+ continue;
+ }
+
+ if (fscan->fx_tcbit)
+ {
+ /* We've already done this one. */
+ continue;
+ }
+
+ /* fscan should also be a fixup to a local symbol in the same
+ section. */
+ sym = fscan->fx_addsy;
+ if (sym == NULL
+ || fscan->fx_subsy != NULL
+ || fscan->fx_addnumber != 0
+ || S_GET_SEGMENT (sym) != sec
+#if ! defined (BFD_ASSEMBLER) && defined (OBJ_COFF)
+ || S_GET_STORAGE_CLASS (sym) == C_EXT
+#endif
+ || S_IS_EXTERNAL (sym))
+ {
+ as_warn_where (fix->fx_file, fix->fx_line,
+ _(".uses target does not refer to a local symbol in the same section"));
+ continue;
+ }
+
+ /* Now we look through all the fixups of all the sections,
+ counting the number of times we find a reference to sym. */
+ info.sym = sym;
+ info.count = 0;
+#ifdef BFD_ASSEMBLER
+ bfd_map_over_sections (stdoutput, sh_count_relocs, (PTR) &info);
+#else
+ {
+ int iscan;
+
+ for (iscan = SEG_E0; iscan < SEG_UNKNOWN; iscan++)
+ sh_count_relocs ((bfd *) NULL, iscan, (PTR) &info);
+ }
+#endif
+
+ if (info.count < 1)
+ abort ();
+
+ /* Generate a BFD_RELOC_SH_COUNT fixup at the location of sym.
+ We have already adjusted the value of sym to include the
+ fragment address, so we undo that adjustment here. */
+ subseg_change (sec, 0);
+ fix_new (symbol_get_frag (sym),
+ S_GET_VALUE (sym) - symbol_get_frag (sym)->fr_address,
+ 4, &abs_symbol, info.count, 0, BFD_RELOC_SH_COUNT);
+ }
}
+/* This function is called after the symbol table has been completed,
+ but before the relocs or section contents have been written out.
+ If we have seen any .uses pseudo-ops, they point to an instruction
+ which loads a register with the address of a function. We look
+ through the fixups to find where the function address is being
+ loaded from. We then generate a COUNT reloc giving the number of
+ times that function address is referred to. The linker uses this
+ information when doing relaxing, to decide when it can eliminate
+ the stored function address entirely. */
+
void
-md_create_long_jump (ptr, from_Nddr, to_Nddr, frag, to_symbol)
- char *ptr;
- addressT from_Nddr, to_Nddr;
- fragS *frag;
- symbolS *to_symbol;
+sh_frob_file ()
{
- as_fatal ("failed sanity check.");
+ if (! sh_relax)
+ return;
+
+#ifdef BFD_ASSEMBLER
+ bfd_map_over_sections (stdoutput, sh_frob_section, (PTR) NULL);
+#else
+ {
+ int iseg;
+
+ for (iseg = SEG_E0; iseg < SEG_UNKNOWN; iseg++)
+ sh_frob_section ((bfd *) NULL, iseg, (PTR) NULL);
+ }
+#endif
}
-/*
- called after relaxing, change the frags so they know how big they are
- */
+/* Called after relaxing. Set the correct sizes of the fragments, and
+ create relocs so that md_apply_fix will fill in the correct values. */
+
void
-md_convert_frag (headers, fragP)
+md_convert_frag (headers, seg, fragP)
+#ifdef BFD_ASSEMBLER
+ bfd *headers;
+#else
object_headers *headers;
+#endif
+ segT seg;
fragS *fragP;
-
{
- unsigned char *buffer = (unsigned char *) (fragP->fr_fix + fragP->fr_literal);
int donerelax = 0;
- int highbyte = shl ? 1 : 0;
- int lowbyte = shl ? 0 : 1;
- int targ_addr = ((fragP->fr_symbol ? S_GET_VALUE (fragP->fr_symbol) : 0) + fragP->fr_offset);
+
switch (fragP->fr_subtype)
{
case C (COND_JUMP, COND8):
- {
- /* Get the address of the end of the instruction */
- int next_inst = fragP->fr_fix + fragP->fr_address + 2;
-
- int disp = targ_addr - next_inst - 2;
- disp /= 2;
-
- md_number_to_chars (buffer + lowbyte, disp & 0xff, 1);
- fragP->fr_fix += 2;
- fragP->fr_var = 0;
- }
+ case C (COND_JUMP_DELAY, COND8):
+ subseg_change (seg, 0);
+ fix_new (fragP, fragP->fr_fix, 2, fragP->fr_symbol, fragP->fr_offset,
+ 1, BFD_RELOC_SH_PCDISP8BY2);
+ fragP->fr_fix += 2;
+ fragP->fr_var = 0;
break;
case C (UNCOND_JUMP, UNCOND12):
- {
- /* Get the address of the end of the instruction */
- int next_inst = fragP->fr_fix + fragP->fr_address + 2;
-
- int t;
- int disp = targ_addr - next_inst - 2;
-
- disp /= 2;
- t = buffer[highbyte] & 0xf0;
- md_number_to_chars (buffer, disp & 0xfff, 2);
- buffer[highbyte] = (buffer[highbyte] & 0xf) | t;
- fragP->fr_fix += 2;
- fragP->fr_var = 0;
- }
+ subseg_change (seg, 0);
+ fix_new (fragP, fragP->fr_fix, 2, fragP->fr_symbol, fragP->fr_offset,
+ 1, BFD_RELOC_SH_PCDISP12BY2);
+ fragP->fr_fix += 2;
+ fragP->fr_var = 0;
break;
case C (UNCOND_JUMP, UNCOND32):
case C (UNCOND_JUMP, UNDEF_WORD_DISP):
- {
- /* A jump wont fit in 12 bits, make code which looks like
- bra foo
- mov.w @(0, PC), r14
- .long disp
- foo: bra @r14
+ if (fragP->fr_symbol == NULL)
+ as_bad (_("at 0x%lx, displacement overflows 12-bit field"),
+ (unsigned long) fragP->fr_address);
+ else if (S_IS_DEFINED (fragP->fr_symbol))
+ as_bad (_("at 0x%lx, displacement to defined symbol %s overflows 12-bit field"),
+ (unsigned long) fragP->fr_address,
+ S_GET_NAME (fragP->fr_symbol));
+ else
+ as_bad (_("at 0x%lx, displacement to undefined symbol %s overflows 12-bit field"),
+ (unsigned long) fragP->fr_address,
+ S_GET_NAME (fragP->fr_symbol));
+
+#if 0 /* This code works, but generates poor code and the compiler
+ should never produce a sequence that requires it to be used. */
+
+ /* A jump wont fit in 12 bits, make code which looks like
+ bra foo
+ mov.w @(0, PC), r14
+ .long disp
+ foo: bra @r14
*/
+ int t = buffer[0] & 0x10;
- int next_inst =
- fragP->fr_fix + fragP->fr_address + UNCOND32_LENGTH;
-
- int disp = targ_addr - next_inst;
- int t = buffer[0] & 0x10;
-
- disp /= 2;
-abort();
- buffer[highbyte] = 0xa0; /* branch over move and disp */
- buffer[lowbyte] = 3;
- buffer[highbyte+2] = 0xd0 | JREG; /* Build mov insn */
- buffer[lowbyte+2] = 0x00;
-
- buffer[highbyte+4] = 0; /* space for 32 bit jump disp */
- buffer[lowbyte+4] = 0;
- buffer[highbyte+6] = 0;
- buffer[lowbyte+6] = 0;
-
- buffer[highbyte+8] = 0x40 | JREG; /* Build jmp @JREG */
- buffer[lowbyte+8] = t ? 0xb : 0x2b;
-
- buffer[highbyte+10] = 0x20; /* build nop */
- buffer[lowbyte+10] = 0x0b;
-
- /* Make reloc for the long disp */
- fix_new (fragP,
- fragP->fr_fix + 4,
- 4,
- fragP->fr_symbol,
- fragP->fr_offset,
- 0,
- R_SH_IMM32);
- fragP->fr_fix += UNCOND32_LENGTH;
- fragP->fr_var = 0;
- donerelax = 1;
+ buffer[highbyte] = 0xa0; /* branch over move and disp */
+ buffer[lowbyte] = 3;
+ buffer[highbyte+2] = 0xd0 | JREG; /* Build mov insn */
+ buffer[lowbyte+2] = 0x00;
+
+ buffer[highbyte+4] = 0; /* space for 32 bit jump disp */
+ buffer[lowbyte+4] = 0;
+ buffer[highbyte+6] = 0;
+ buffer[lowbyte+6] = 0;
+
+ buffer[highbyte+8] = 0x40 | JREG; /* Build jmp @JREG */
+ buffer[lowbyte+8] = t ? 0xb : 0x2b;
+
+ buffer[highbyte+10] = 0x20; /* build nop */
+ buffer[lowbyte+10] = 0x0b;
+
+ /* Make reloc for the long disp */
+ fix_new (fragP,
+ fragP->fr_fix + 4,
+ 4,
+ fragP->fr_symbol,
+ fragP->fr_offset,
+ 0,
+ BFD_RELOC_32);
+ fragP->fr_fix += UNCOND32_LENGTH;
+ fragP->fr_var = 0;
+ donerelax = 1;
+#endif
- }
break;
case C (COND_JUMP, COND12):
+ case C (COND_JUMP_DELAY, COND12):
+ /* A bcond won't fit, so turn it into a b!cond; bra disp; nop */
+ /* I found that a relax failure for gcc.c-torture/execute/930628-1.c
+ was due to gas incorrectly relaxing an out-of-range conditional
+ branch with delay slot. It turned:
+ bf.s L6 (slot mov.l r12,@(44,r0))
+ into:
+
+2c: 8f 01 a0 8b bf.s 32 <_main+32> (slot bra L6)
+30: 00 09 nop
+32: 10 cb mov.l r12,@(44,r0)
+ Therefore, branches with delay slots have to be handled
+ differently from ones without delay slots. */
{
- /* A bcond won't fit, so turn it into a b!cond; bra disp; nop */
- int next_inst =
- fragP->fr_fix + fragP->fr_address + 6;
-
- int disp = targ_addr - next_inst;
- disp /= 2;
- md_number_to_chars (buffer + 2, disp & 0xfff, 2);
- buffer[highbyte] ^= 0x2; /* Toggle T/F bit */
- buffer[lowbyte] = 1; /* branch over jump and nop */
- buffer[highbyte+2] = (buffer[highbyte+2] & 0xf) | 0xa0; /* Build jump insn */
- buffer[lowbyte+5] = 0x20; /* Build nop */
- buffer[lowbyte+5] = 0x0b;
- fragP->fr_fix += 6;
+ unsigned char *buffer =
+ (unsigned char *) (fragP->fr_fix + fragP->fr_literal);
+ int highbyte = target_big_endian ? 0 : 1;
+ int lowbyte = target_big_endian ? 1 : 0;
+ int delay = fragP->fr_subtype == C (COND_JUMP_DELAY, COND12);
+
+ /* Toggle the true/false bit of the bcond. */
+ buffer[highbyte] ^= 0x2;
+
+ /* If this is a dalayed branch, we may not put the the bra in the
+ slot. So we change it to a non-delayed branch, like that:
+ b! cond slot_label; bra disp; slot_label: slot_insn
+ ??? We should try if swapping the conditional branch and
+ its delay-slot insn already makes the branch reach. */
+
+ /* Build a relocation to six / four bytes farther on. */
+ subseg_change (seg, 0);
+ fix_new (fragP, fragP->fr_fix, 2,
+#ifdef BFD_ASSEMBLER
+ section_symbol (seg),
+#else
+ seg_info (seg)->dot,
+#endif
+ fragP->fr_address + fragP->fr_fix + (delay ? 4 : 6),
+ 1, BFD_RELOC_SH_PCDISP8BY2);
+
+ /* Set up a jump instruction. */
+ buffer[highbyte + 2] = 0xa0;
+ buffer[lowbyte + 2] = 0;
+ fix_new (fragP, fragP->fr_fix + 2, 2, fragP->fr_symbol,
+ fragP->fr_offset, 1, BFD_RELOC_SH_PCDISP12BY2);
+
+ if (delay)
+ {
+ buffer[highbyte] &= ~0x4; /* Removes delay slot from branch. */
+ fragP->fr_fix += 4;
+ }
+ else
+ {
+ /* Fill in a NOP instruction. */
+ buffer[highbyte + 4] = 0x0;
+ buffer[lowbyte + 4] = 0x9;
+
+ fragP->fr_fix += 6;
+ }
fragP->fr_var = 0;
donerelax = 1;
}
break;
case C (COND_JUMP, COND32):
+ case C (COND_JUMP_DELAY, COND32):
case C (COND_JUMP, UNDEF_WORD_DISP):
- {
- /* A bcond won't fit and it won't go into a 12 bit
- displacement either, the code sequence looks like:
- b!cond foop
- mov.w @(n, PC), r14
- jmp @r14
- nop
- .long where
- foop:
+ case C (COND_JUMP_DELAY, UNDEF_WORD_DISP):
+ if (fragP->fr_symbol == NULL)
+ as_bad (_("at 0x%lx, displacement overflows 8-bit field"),
+ (unsigned long) fragP->fr_address);
+ else if (S_IS_DEFINED (fragP->fr_symbol))
+ as_bad (_("at 0x%lx, displacement to defined symbol %s overflows 8-bit field "),
+ (unsigned long) fragP->fr_address,
+ S_GET_NAME (fragP->fr_symbol));
+ else
+ as_bad (_("at 0x%lx, displacement to undefined symbol %s overflows 8-bit field "),
+ (unsigned long) fragP->fr_address,
+ S_GET_NAME (fragP->fr_symbol));
+
+#if 0 /* This code works, but generates poor code, and the compiler
+ should never produce a sequence that requires it to be used. */
+
+ /* A bcond won't fit and it won't go into a 12 bit
+ displacement either, the code sequence looks like:
+ b!cond foop
+ mov.w @(n, PC), r14
+ jmp @r14
+ nop
+ .long where
+ foop:
*/
- int next_inst =
- fragP->fr_fix + fragP->fr_address + COND32_LENGTH;
-
- int disp = targ_addr - next_inst;
- disp /= 2;
-abort();
- buffer[0] ^= 0x2; /* Toggle T/F bit */
+ buffer[0] ^= 0x2; /* Toggle T/F bit */
#define JREG 14
- buffer[1] = 5; /* branch over mov, jump, nop and ptr */
- buffer[2] = 0xd0 | JREG; /* Build mov insn */
- buffer[3] = 0x2;
- buffer[4] = 0x40 | JREG; /* Build jmp @JREG */
- buffer[5] = 0x0b;
- buffer[6] = 0x20; /* build nop */
- buffer[7] = 0x0b;
- buffer[8] = 0; /* space for 32 bit jump disp */
- buffer[9] = 0;
- buffer[10] = 0;
- buffer[11] = 0;
- buffer[12] = 0;
- buffer[13] = 0;
- /* Make reloc for the long disp */
- fix_new (fragP,
- fragP->fr_fix + 8,
- 4,
- fragP->fr_symbol,
- fragP->fr_offset,
- 0,
- R_SH_IMM32);
- fragP->fr_fix += COND32_LENGTH;
- fragP->fr_var = 0;
- donerelax = 1;
- }
+ buffer[1] = 5; /* branch over mov, jump, nop and ptr */
+ buffer[2] = 0xd0 | JREG; /* Build mov insn */
+ buffer[3] = 0x2;
+ buffer[4] = 0x40 | JREG; /* Build jmp @JREG */
+ buffer[5] = 0x0b;
+ buffer[6] = 0x20; /* build nop */
+ buffer[7] = 0x0b;
+ buffer[8] = 0; /* space for 32 bit jump disp */
+ buffer[9] = 0;
+ buffer[10] = 0;
+ buffer[11] = 0;
+ buffer[12] = 0;
+ buffer[13] = 0;
+ /* Make reloc for the long disp */
+ fix_new (fragP,
+ fragP->fr_fix + 8,
+ 4,
+ fragP->fr_symbol,
+ fragP->fr_offset,
+ 0,
+ BFD_RELOC_32);
+ fragP->fr_fix += COND32_LENGTH;
+ fragP->fr_var = 0;
+ donerelax = 1;
+#endif
+
break;
default:
abort ();
}
- if (donerelax && !relax)
- {
- as_warn ("Offset doesn't fit at 0x%lx, trying to get to %s+0x%x",
- (unsigned long) fragP->fr_address,
- fragP->fr_symbol ? S_GET_NAME(fragP->fr_symbol): "",
- targ_addr);
- }
-
+ if (donerelax && !sh_relax)
+ as_warn_where (fragP->fr_file, fragP->fr_line,
+ _("overflow in branch to %s; converted into longer instruction sequence"),
+ (fragP->fr_symbol != NULL
+ ? S_GET_NAME (fragP->fr_symbol)
+ : ""));
}
valueT
segT seg AND
valueT size)
{
+#ifdef BFD_ASSEMBLER
+#ifdef OBJ_ELF
+ return size;
+#else /* ! OBJ_ELF */
+ return ((size + (1 << bfd_get_section_alignment (stdoutput, seg)) - 1)
+ & (-1 << bfd_get_section_alignment (stdoutput, seg)));
+#endif /* ! OBJ_ELF */
+#else /* ! BFD_ASSEMBLER */
return ((size + (1 << section_alignment[(int) seg]) - 1)
& (-1 << section_alignment[(int) seg]));
+#endif /* ! BFD_ASSEMBLER */
+}
+
+/* This static variable is set by s_uacons to tell sh_cons_align that
+ the expession does not need to be aligned. */
+
+static int sh_no_align_cons = 0;
+
+/* This handles the unaligned space allocation pseudo-ops, such as
+ .uaword. .uaword is just like .word, but the value does not need
+ to be aligned. */
+
+static void
+s_uacons (bytes)
+ int bytes;
+{
+ /* Tell sh_cons_align not to align this value. */
+ sh_no_align_cons = 1;
+ cons (bytes);
+}
+/* If a .word, et. al., pseud-op is seen, warn if the value is not
+ aligned correctly. Note that this can cause warnings to be issued
+ when assembling initialized structured which were declared with the
+ packed attribute. FIXME: Perhaps we should require an option to
+ enable this warning? */
+
+void
+sh_cons_align (nbytes)
+ int nbytes;
+{
+ int nalign;
+ char *p;
+
+ if (sh_no_align_cons)
+ {
+ /* This is an unaligned pseudo-op. */
+ sh_no_align_cons = 0;
+ return;
+ }
+
+ nalign = 0;
+ while ((nbytes & 1) == 0)
+ {
+ ++nalign;
+ nbytes >>= 1;
+ }
+
+ if (nalign == 0)
+ return;
+
+ if (now_seg == absolute_section)
+ {
+ if ((abs_section_offset & ((1 << nalign) - 1)) != 0)
+ as_warn (_("misaligned data"));
+ return;
+ }
+
+ p = frag_var (rs_align_code, 1, 1, (relax_substateT) 0,
+ (symbolS *) NULL, (offsetT) nalign, (char *) NULL);
+
+ record_alignment (now_seg, nalign);
+}
+
+/* When relaxing, we need to output a reloc for any .align directive
+ that requests alignment to a four byte boundary or larger. This is
+ also where we check for misaligned data. */
+
+void
+sh_handle_align (frag)
+ fragS *frag;
+{
+ if (sh_relax
+ && frag->fr_type == rs_align
+ && frag->fr_address + frag->fr_fix > 0
+ && frag->fr_offset > 1
+ && now_seg != bss_section)
+ fix_new (frag, frag->fr_fix, 2, &abs_symbol, frag->fr_offset, 0,
+ BFD_RELOC_SH_ALIGN);
+
+ if (frag->fr_type == rs_align_code
+ && frag->fr_next->fr_address - frag->fr_address - frag->fr_fix != 0)
+ as_warn_where (frag->fr_file, frag->fr_line, _("misaligned data"));
+}
+
+/* This macro decides whether a particular reloc is an entry in a
+ switch table. It is used when relaxing, because the linker needs
+ to know about all such entries so that it can adjust them if
+ necessary. */
+
+#ifdef BFD_ASSEMBLER
+#define SWITCH_TABLE_CONS(fix) (0)
+#else
+#define SWITCH_TABLE_CONS(fix) \
+ ((fix)->fx_r_type == 0 \
+ && ((fix)->fx_size == 2 \
+ || (fix)->fx_size == 1 \
+ || (fix)->fx_size == 4))
+#endif
+
+#define SWITCH_TABLE(fix) \
+ ((fix)->fx_addsy != NULL \
+ && (fix)->fx_subsy != NULL \
+ && S_GET_SEGMENT ((fix)->fx_addsy) == text_section \
+ && S_GET_SEGMENT ((fix)->fx_subsy) == text_section \
+ && ((fix)->fx_r_type == BFD_RELOC_32 \
+ || (fix)->fx_r_type == BFD_RELOC_16 \
+ || (fix)->fx_r_type == BFD_RELOC_8 \
+ || SWITCH_TABLE_CONS (fix)))
+
+/* See whether we need to force a relocation into the output file.
+ This is used to force out switch and PC relative relocations when
+ relaxing. */
+
+int
+sh_force_relocation (fix)
+ fixS *fix;
+{
+
+ if (fix->fx_r_type == BFD_RELOC_VTABLE_INHERIT
+ || fix->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
+ return 1;
+
+ if (! sh_relax)
+ return 0;
+
+ return (fix->fx_pcrel
+ || SWITCH_TABLE (fix)
+ || fix->fx_r_type == BFD_RELOC_SH_COUNT
+ || fix->fx_r_type == BFD_RELOC_SH_ALIGN
+ || fix->fx_r_type == BFD_RELOC_SH_CODE
+ || fix->fx_r_type == BFD_RELOC_SH_DATA
+ || fix->fx_r_type == BFD_RELOC_SH_LABEL);
+}
+
+#ifdef OBJ_ELF
+boolean
+sh_fix_adjustable (fixP)
+ fixS *fixP;
+{
+
+ if (fixP->fx_addsy == NULL)
+ return 1;
+
+ /* We need the symbol name for the VTABLE entries */
+ if (fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT
+ || fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
+ return 0;
+
+ return 1;
}
+#endif
+/* Apply a fixup to the object file. */
+
+#ifdef BFD_ASSEMBLER
+int
+md_apply_fix (fixP, valp)
+ fixS *fixP;
+ valueT *valp;
+#else
void
md_apply_fix (fixP, val)
fixS *fixP;
long val;
+#endif
{
char *buf = fixP->fx_where + fixP->fx_frag->fr_literal;
- int addr = fixP->fx_frag->fr_address + fixP->fx_where;
- int lowbyte = shl ? 0 : 1;
+ int lowbyte = target_big_endian ? 1 : 0;
+ int highbyte = target_big_endian ? 0 : 1;
+#ifdef BFD_ASSEMBLER
+ long val = *valp;
+#endif
+ long max, min;
+ int shift;
+
+#ifdef BFD_ASSEMBLER
+ /* adjust_reloc_syms won't convert a reloc against a weak symbol
+ into a reloc against a section, but bfd_install_relocation will
+ screw up if the symbol is defined, so we have to adjust val here
+ to avoid the screw up later. */
+ if (fixP->fx_addsy != NULL
+ && S_IS_WEAK (fixP->fx_addsy))
+ val -= S_GET_VALUE (fixP->fx_addsy);
+#endif
+
+#ifndef BFD_ASSEMBLER
if (fixP->fx_r_type == 0)
{
if (fixP->fx_size == 2)
- fixP->fx_r_type = R_SH_IMM16;
+ fixP->fx_r_type = BFD_RELOC_16;
+ else if (fixP->fx_size == 4)
+ fixP->fx_r_type = BFD_RELOC_32;
+ else if (fixP->fx_size == 1)
+ fixP->fx_r_type = BFD_RELOC_8;
else
- fixP->fx_r_type = R_SH_IMM32;
+ abort ();
}
+#endif
+ max = min = 0;
+ shift = 0;
switch (fixP->fx_r_type)
{
-
- case R_SH_IMM4:
+ case BFD_RELOC_SH_IMM4:
+ max = 0xf;
*buf = (*buf & 0xf0) | (val & 0xf);
break;
- case R_SH_IMM4BY2:
+ case BFD_RELOC_SH_IMM4BY2:
+ max = 0xf;
+ shift = 1;
*buf = (*buf & 0xf0) | ((val >> 1) & 0xf);
break;
- case R_SH_IMM4BY4:
+ case BFD_RELOC_SH_IMM4BY4:
+ max = 0xf;
+ shift = 2;
*buf = (*buf & 0xf0) | ((val >> 2) & 0xf);
break;
- case R_SH_IMM8BY2:
+ case BFD_RELOC_SH_IMM8BY2:
+ max = 0xff;
+ shift = 1;
*buf = val >> 1;
break;
- case R_SH_IMM8BY4:
+ case BFD_RELOC_SH_IMM8BY4:
+ max = 0xff;
+ shift = 2;
*buf = val >> 2;
break;
- case R_SH_IMM8:
+ case BFD_RELOC_8:
+ case BFD_RELOC_SH_IMM8:
+ /* Sometimes the 8 bit value is sign extended (e.g., add) and
+ sometimes it is not (e.g., and). We permit any 8 bit value.
+ Note that adding further restrictions may invalidate
+ reasonable looking assembly code, such as ``and -0x1,r0''. */
+ max = 0xff;
+ min = - 0xff;
*buf++ = val;
break;
- case R_SH_PCRELIMM8BY4:
- addr &= ~1;
-#if 0
- if (val & 0x3)
- as_warn ("non aligned displacement at %x\n", addr);
-#endif
- /* val -= (addr + 4); */
- if (shl||1)
- val += 1;
- else
- val += 3;
- val /= 4;
+ case BFD_RELOC_SH_PCRELIMM8BY4:
+ /* The lower two bits of the PC are cleared before the
+ displacement is added in. We can assume that the destination
+ is on a 4 byte bounday. If this instruction is also on a 4
+ byte boundary, then we want
+ (target - here) / 4
+ and target - here is a multiple of 4.
+ Otherwise, we are on a 2 byte boundary, and we want
+ (target - (here - 2)) / 4
+ and target - here is not a multiple of 4. Computing
+ (target - (here - 2)) / 4 == (target - here + 2) / 4
+ works for both cases, since in the first case the addition of
+ 2 will be removed by the division. target - here is in the
+ variable val. */
+ val = (val + 2) / 4;
if (val & ~0xff)
- as_warn_where (fixP->fx_file, fixP->fx_line, "pcrel too far");
+ as_bad_where (fixP->fx_file, fixP->fx_line, _("pcrel too far"));
buf[lowbyte] = val;
break;
- case R_SH_PCRELIMM8BY2:
- addr &= ~1;
- /* if ((val & 0x1) != shl)
- as_bad ("odd displacement at %x\n", addr);*/
- /* val -= (addr + 4); */
-/* if (!shl)
- val++;*/
+ case BFD_RELOC_SH_PCRELIMM8BY2:
val /= 2;
if (val & ~0xff)
- as_warn_where (fixP->fx_file, fixP->fx_line, "pcrel too far");
+ as_bad_where (fixP->fx_file, fixP->fx_line, _("pcrel too far"));
buf[lowbyte] = val;
break;
- case R_SH_IMM32:
- if (shl)
+ case BFD_RELOC_SH_PCDISP8BY2:
+ val /= 2;
+ if (val < -0x80 || val > 0x7f)
+ as_bad_where (fixP->fx_file, fixP->fx_line, _("pcrel too far"));
+ buf[lowbyte] = val;
+ break;
+
+ case BFD_RELOC_SH_PCDISP12BY2:
+ val /= 2;
+ if (val < -0x800 || val >= 0x7ff)
+ as_bad_where (fixP->fx_file, fixP->fx_line, _("pcrel too far"));
+ buf[lowbyte] = val & 0xff;
+ buf[highbyte] |= (val >> 8) & 0xf;
+ break;
+
+ case BFD_RELOC_32:
+ if (! target_big_endian)
{
*buf++ = val >> 0;
*buf++ = val >> 8;
}
break;
- case R_SH_IMM16:
- if (shl)
+ case BFD_RELOC_16:
+ if (! target_big_endian)
{
*buf++ = val >> 0;
*buf++ = val >> 8;
}
break;
+ case BFD_RELOC_SH_USES:
+ /* Pass the value into sh_coff_reloc_mangle. */
+ fixP->fx_addnumber = val;
+ break;
+
+ case BFD_RELOC_SH_COUNT:
+ case BFD_RELOC_SH_ALIGN:
+ case BFD_RELOC_SH_CODE:
+ case BFD_RELOC_SH_DATA:
+ case BFD_RELOC_SH_LABEL:
+ /* Nothing to do here. */
+ break;
+
+ case BFD_RELOC_VTABLE_INHERIT:
+ case BFD_RELOC_VTABLE_ENTRY:
+ fixP->fx_done = 0;
+#ifdef BFD_ASSEMBLER
+ return 0;
+#else
+ return;
+#endif
+
default:
abort ();
}
-}
-void
-DEFUN (md_operand, (expressionP), expressionS * expressionP)
-{
+ if (shift != 0)
+ {
+ if ((val & ((1 << shift) - 1)) != 0)
+ as_bad_where (fixP->fx_file, fixP->fx_line, _("misaligned offset"));
+ if (val >= 0)
+ val >>= shift;
+ else
+ val = ((val >> shift)
+ | ((long) -1 & ~ ((long) -1 >> shift)));
+ }
+ if (max != 0 && (val < min || val > max))
+ as_bad_where (fixP->fx_file, fixP->fx_line, _("offset out of range"));
+
+#ifdef BFD_ASSEMBLER
+ return 0;
+#endif
}
-int md_long_jump_size;
+/* Called just before address relaxation. Return the length
+ by which a fragment must grow to reach it's destination. */
-/*
- called just before address relaxation, return the length
- by which a fragment must grow to reach it's destination
- */
int
md_estimate_size_before_relax (fragP, segment_type)
register fragS *fragP;
default:
abort ();
case C (COND_JUMP, UNDEF_DISP):
+ case C (COND_JUMP_DELAY, UNDEF_DISP):
/* used to be a branch to somewhere which was unknown */
if (fragP->fr_symbol
&& S_GET_SEGMENT (fragP->fr_symbol) == segment_type)
{
+ int what = GET_WHAT (fragP->fr_subtype);
/* Got a symbol and it's defined in this segment, become byte
sized - maybe it will fix up */
- fragP->fr_subtype = C (COND_JUMP, COND8);
- fragP->fr_var = md_relax_table[C (COND_JUMP, COND8)].rlx_length;
+ fragP->fr_subtype = C (what, COND8);
+ fragP->fr_var = md_relax_table[C (what, COND8)].rlx_length;
}
else if (fragP->fr_symbol)
{
+ int what = GET_WHAT (fragP->fr_subtype);
/* Its got a segment, but its not ours, so it will always be long */
- fragP->fr_subtype = C (COND_JUMP, UNDEF_WORD_DISP);
- fragP->fr_var = md_relax_table[C (COND_JUMP, COND32)].rlx_length;
- return md_relax_table[C (COND_JUMP, COND32)].rlx_length;
+ fragP->fr_subtype = C (what, UNDEF_WORD_DISP);
+ fragP->fr_var = md_relax_table[C (what, COND32)].rlx_length;
+ return md_relax_table[C (what, COND32)].rlx_length;
}
else
{
+ int what = GET_WHAT (fragP->fr_subtype);
/* We know the abs value */
- fragP->fr_subtype = C (COND_JUMP, COND8);
- fragP->fr_var = md_relax_table[C (COND_JUMP, COND8)].rlx_length;
+ fragP->fr_subtype = C (what, COND8);
+ fragP->fr_var = md_relax_table[C (what, COND8)].rlx_length;
}
break;
valueT use;
int nbytes;
{
- if (shl)
+ if (! target_big_endian)
number_to_chars_littleendian (ptr, use, nbytes);
else
number_to_chars_bigendian (ptr, use, nbytes);
md_pcrel_from (fixP)
fixS *fixP;
{
- int gap = fixP->fx_size + fixP->fx_where + fixP->fx_frag->fr_address - 1 ;
- return gap;
+ return fixP->fx_size + fixP->fx_where + fixP->fx_frag->fr_address + 2;
}
-short
-tc_coff_fix2rtype (fix_ptr)
- fixS *fix_ptr;
+#ifdef OBJ_COFF
+
+int
+tc_coff_sizemachdep (frag)
+ fragS *frag;
+{
+ return md_relax_table[frag->fr_subtype].rlx_length;
+}
+
+#endif /* OBJ_COFF */
+
+/* When we align the .text section, insert the correct NOP pattern. */
+
+int
+sh_do_align (n, fill, len, max)
+ int n;
+ const char *fill;
+ int len;
+ int max;
{
- if (fix_ptr->fx_r_type == RELOC_32)
+ if (fill == NULL
+ && subseg_text_p (now_seg)
+ && n > 1)
{
- /* cons likes to create reloc32's whatever the size of the reloc..
- */
- switch (fix_ptr->fx_size)
- {
- case 2:
- return R_SH_IMM16;
+ static const unsigned char big_nop_pattern[] = { 0x00, 0x09 };
+ static const unsigned char little_nop_pattern[] = { 0x09, 0x00 };
+
+ /* First align to a 2 byte boundary, in case there is an odd
+ .byte. */
+ frag_align (1, 0, 0);
+ if (target_big_endian)
+ frag_align_pattern (n, big_nop_pattern, sizeof big_nop_pattern, max);
+ else
+ frag_align_pattern (n, little_nop_pattern, sizeof little_nop_pattern,
+ max);
+ return 1;
+ }
+
+ return 0;
+}
+
+#ifndef BFD_ASSEMBLER
+#ifdef OBJ_COFF
+
+/* Map BFD relocs to SH COFF relocs. */
+
+struct reloc_map
+{
+ bfd_reloc_code_real_type bfd_reloc;
+ int sh_reloc;
+};
+
+static const struct reloc_map coff_reloc_map[] =
+{
+ { BFD_RELOC_32, R_SH_IMM32 },
+ { BFD_RELOC_16, R_SH_IMM16 },
+ { BFD_RELOC_8, R_SH_IMM8 },
+ { BFD_RELOC_SH_PCDISP8BY2, R_SH_PCDISP8BY2 },
+ { BFD_RELOC_SH_PCDISP12BY2, R_SH_PCDISP },
+ { BFD_RELOC_SH_IMM4, R_SH_IMM4 },
+ { BFD_RELOC_SH_IMM4BY2, R_SH_IMM4BY2 },
+ { BFD_RELOC_SH_IMM4BY4, R_SH_IMM4BY4 },
+ { BFD_RELOC_SH_IMM8, R_SH_IMM8 },
+ { BFD_RELOC_SH_IMM8BY2, R_SH_IMM8BY2 },
+ { BFD_RELOC_SH_IMM8BY4, R_SH_IMM8BY4 },
+ { BFD_RELOC_SH_PCRELIMM8BY2, R_SH_PCRELIMM8BY2 },
+ { BFD_RELOC_SH_PCRELIMM8BY4, R_SH_PCRELIMM8BY4 },
+ { BFD_RELOC_8_PCREL, R_SH_SWITCH8 },
+ { BFD_RELOC_SH_SWITCH16, R_SH_SWITCH16 },
+ { BFD_RELOC_SH_SWITCH32, R_SH_SWITCH32 },
+ { BFD_RELOC_SH_USES, R_SH_USES },
+ { BFD_RELOC_SH_COUNT, R_SH_COUNT },
+ { BFD_RELOC_SH_ALIGN, R_SH_ALIGN },
+ { BFD_RELOC_SH_CODE, R_SH_CODE },
+ { BFD_RELOC_SH_DATA, R_SH_DATA },
+ { BFD_RELOC_SH_LABEL, R_SH_LABEL },
+ { BFD_RELOC_UNUSED, 0 }
+};
+
+/* Adjust a reloc for the SH. This is similar to the generic code,
+ but does some minor tweaking. */
+
+void
+sh_coff_reloc_mangle (seg, fix, intr, paddr)
+ segment_info_type *seg;
+ fixS *fix;
+ struct internal_reloc *intr;
+ unsigned int paddr;
+{
+ symbolS *symbol_ptr = fix->fx_addsy;
+ symbolS *dot;
+
+ intr->r_vaddr = paddr + fix->fx_frag->fr_address + fix->fx_where;
+
+ if (! SWITCH_TABLE (fix))
+ {
+ const struct reloc_map *rm;
+
+ for (rm = coff_reloc_map; rm->bfd_reloc != BFD_RELOC_UNUSED; rm++)
+ if (rm->bfd_reloc == (bfd_reloc_code_real_type) fix->fx_r_type)
break;
- case 1:
- return R_SH_IMM8;
+ if (rm->bfd_reloc == BFD_RELOC_UNUSED)
+ as_bad_where (fix->fx_file, fix->fx_line,
+ _("Can not represent %s relocation in this object file format"),
+ bfd_get_reloc_code_name (fix->fx_r_type));
+ intr->r_type = rm->sh_reloc;
+ intr->r_offset = 0;
+ }
+ else
+ {
+ know (sh_relax);
+
+ if (fix->fx_r_type == BFD_RELOC_16)
+ intr->r_type = R_SH_SWITCH16;
+ else if (fix->fx_r_type == BFD_RELOC_8)
+ intr->r_type = R_SH_SWITCH8;
+ else if (fix->fx_r_type == BFD_RELOC_32)
+ intr->r_type = R_SH_SWITCH32;
+ else
+ abort ();
+
+ /* For a switch reloc, we set r_offset to the difference between
+ the reloc address and the subtrahend. When the linker is
+ doing relaxing, it can use the determine the starting and
+ ending points of the switch difference expression. */
+ intr->r_offset = intr->r_vaddr - S_GET_VALUE (fix->fx_subsy);
+ }
+
+ /* PC relative relocs are always against the current section. */
+ if (symbol_ptr == NULL)
+ {
+ switch (fix->fx_r_type)
+ {
+ case BFD_RELOC_SH_PCRELIMM8BY2:
+ case BFD_RELOC_SH_PCRELIMM8BY4:
+ case BFD_RELOC_SH_PCDISP8BY2:
+ case BFD_RELOC_SH_PCDISP12BY2:
+ case BFD_RELOC_SH_USES:
+ symbol_ptr = seg->dot;
break;
default:
- abort ();
+ break;
}
}
- return R_SH_IMM32;
+
+ if (fix->fx_r_type == BFD_RELOC_SH_USES)
+ {
+ /* We can't store the offset in the object file, since this
+ reloc does not take up any space, so we store it in r_offset.
+ The fx_addnumber field was set in md_apply_fix. */
+ intr->r_offset = fix->fx_addnumber;
+ }
+ else if (fix->fx_r_type == BFD_RELOC_SH_COUNT)
+ {
+ /* We can't store the count in the object file, since this reloc
+ does not take up any space, so we store it in r_offset. The
+ fx_offset field was set when the fixup was created in
+ sh_coff_frob_file. */
+ intr->r_offset = fix->fx_offset;
+ /* This reloc is always absolute. */
+ symbol_ptr = NULL;
+ }
+ else if (fix->fx_r_type == BFD_RELOC_SH_ALIGN)
+ {
+ /* Store the alignment in the r_offset field. */
+ intr->r_offset = fix->fx_offset;
+ /* This reloc is always absolute. */
+ symbol_ptr = NULL;
+ }
+ else if (fix->fx_r_type == BFD_RELOC_SH_CODE
+ || fix->fx_r_type == BFD_RELOC_SH_DATA
+ || fix->fx_r_type == BFD_RELOC_SH_LABEL)
+ {
+ /* These relocs are always absolute. */
+ symbol_ptr = NULL;
+ }
+
+ /* Turn the segment of the symbol into an offset. */
+ if (symbol_ptr != NULL)
+ {
+ dot = segment_info[S_GET_SEGMENT (symbol_ptr)].dot;
+ if (dot != NULL)
+ intr->r_symndx = dot->sy_number;
+ else
+ intr->r_symndx = symbol_ptr->sy_number;
+ }
+ else
+ intr->r_symndx = -1;
}
-int
-tc_coff_sizemachdep (frag)
- fragS *frag;
+#endif /* OBJ_COFF */
+#endif /* ! BFD_ASSEMBLER */
+
+#ifdef BFD_ASSEMBLER
+
+/* Create a reloc. */
+
+arelent *
+tc_gen_reloc (section, fixp)
+ asection *section;
+ fixS *fixp;
{
- return md_relax_table[frag->fr_subtype].rlx_length;
+ arelent *rel;
+ bfd_reloc_code_real_type r_type;
+
+ rel = (arelent *) xmalloc (sizeof (arelent));
+ rel->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *));
+ *rel->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
+ rel->address = fixp->fx_frag->fr_address + fixp->fx_where;
+
+ r_type = fixp->fx_r_type;
+
+ if (SWITCH_TABLE (fixp))
+ {
+ rel->addend = rel->address - S_GET_VALUE (fixp->fx_subsy);
+ if (r_type == BFD_RELOC_16)
+ r_type = BFD_RELOC_SH_SWITCH16;
+ else if (r_type == BFD_RELOC_8)
+ r_type = BFD_RELOC_8_PCREL;
+ else if (r_type == BFD_RELOC_32)
+ r_type = BFD_RELOC_SH_SWITCH32;
+ else
+ abort ();
+ }
+ else if (r_type == BFD_RELOC_SH_USES)
+ rel->addend = fixp->fx_addnumber;
+ else if (r_type == BFD_RELOC_SH_COUNT)
+ rel->addend = fixp->fx_offset;
+ else if (r_type == BFD_RELOC_SH_ALIGN)
+ rel->addend = fixp->fx_offset;
+ else if (r_type == BFD_RELOC_VTABLE_INHERIT
+ || r_type == BFD_RELOC_VTABLE_ENTRY)
+ rel->addend = fixp->fx_offset;
+ else if (fixp->fx_pcrel)
+ rel->addend = fixp->fx_addnumber;
+ else
+ rel->addend = 0;
+
+ rel->howto = bfd_reloc_type_lookup (stdoutput, r_type);
+ if (rel->howto == NULL)
+ {
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ _("Cannot represent relocation type %s"),
+ bfd_get_reloc_code_name (r_type));
+ /* Set howto to a garbage value so that we can keep going. */
+ rel->howto = bfd_reloc_type_lookup (stdoutput, BFD_RELOC_32);
+ assert (rel->howto != NULL);
+ }
+
+ return rel;
}
+
+#endif /* BFD_ASSEMBLER */