\input texinfo @c -*-Texinfo-*-
-@c Copyright (C) 1991-2019 Free Software Foundation, Inc.
+@c Copyright (C) 1991-2020 Free Software Foundation, Inc.
@c UPDATE!! On future updates--
@c (1) check for new machine-dep cmdline options in
@c md_parse_option definitions in config/tc-*.c
This file documents the GNU Assembler "@value{AS}".
@c man begin COPYRIGHT
-Copyright @copyright{} 1991-2019 Free Software Foundation, Inc.
+Copyright @copyright{} 1991-2020 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3
@end tex
@vskip 0pt plus 1filll
-Copyright @copyright{} 1991-2019 Free Software Foundation, Inc.
+Copyright @copyright{} 1991-2020 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3
@ifset Z80
@emph{Target Z80 options:}
- [@b{-z80}] [@b{-r800}]
+ [@b{-z80}]|[@b{-z180}]|[@b{-r800}]|[@b{-ez80}]|[@b{-ez80-adl}]
+ [@b{-local-prefix=}@var{PREFIX}]
+ [@b{-colonless}]
+ [@b{-sdcc}]
+ [@b{-fp-s=}@var{FORMAT}]
+ [@b{-fp-d=}@var{FORMAT}]
+ [@b{-strict}]|[@b{-full}]
+ [@b{-with-inst=@var{INST}[,...]}] [@b{-Wnins @var{INST}[,...]}]
+ [@b{-without-inst=@var{INST}[,...]}] [@b{-Fins @var{INST}[,...]}]
[@b{ -ignore-undocumented-instructions}] [@b{-Wnud}]
[@b{ -ignore-unportable-instructions}] [@b{-Wnup}]
[@b{ -warn-undocumented-instructions}] [@b{-Wud}]
@end ifset
-@c man begin OPTIONS
-
@ifset Z80
-The following options are available when @value{AS} is configured for
-a Z80 family processor.
-@table @gcctabopt
-@item -z80
-Assemble for Z80 processor.
-@item -r800
-Assemble for R800 processor.
-@item -ignore-undocumented-instructions
-@itemx -Wnud
-Assemble undocumented Z80 instructions that also work on R800 without warning.
-@item -ignore-unportable-instructions
-@itemx -Wnup
-Assemble all undocumented Z80 instructions without warning.
-@item -warn-undocumented-instructions
-@itemx -Wud
-Issue a warning for undocumented Z80 instructions that also work on R800.
-@item -warn-unportable-instructions
-@itemx -Wup
-Issue a warning for undocumented Z80 instructions that do not work on R800.
-@item -forbid-undocumented-instructions
-@itemx -Fud
-Treat all undocumented instructions as errors.
-@item -forbid-unportable-instructions
-@itemx -Fup
-Treat undocumented Z80 instructions that do not work on R800 as errors.
-@end table
-@end ifset
+@ifclear man
+@xref{Z80 Options}, for the options available when @value{AS} is configured
+for an Z80 processor.
+@end ifclear
+
+@ifset man
+@c man begin OPTIONS
+The following options are available when @value{AS} is configured for an
+Z80 processor.
@c man end
+@c man begin INCLUDE
+@include c-z80.texi
+@c ended inside the included file
+@end ifset
+
+@end ifset
@menu
* Manual:: Structure of this Manual
* ABORT (COFF):: @code{.ABORT}
@end ifset
-* Align:: @code{.align @var{abs-expr} , @var{abs-expr}}
+* Align:: @code{.align [@var{abs-expr}[, @var{abs-expr}[, @var{abs-expr}]]]}
* Altmacro:: @code{.altmacro}
* Ascii:: @code{.ascii "@var{string}"}@dots{}
* Asciz:: @code{.asciz "@var{string}"}@dots{}
-* Balign:: @code{.balign @var{abs-expr} , @var{abs-expr}}
+* Balign:: @code{.balign [@var{abs-expr}[, @var{abs-expr}]]}
* Bundle directives:: @code{.bundle_align_mode @var{abs-expr}}, etc
* Byte:: @code{.byte @var{expressions}}
* CFI directives:: @code{.cfi_startproc [simple]}, @code{.cfi_endproc}, etc.
* Octa:: @code{.octa @var{bignums}}
* Offset:: @code{.offset @var{loc}}
* Org:: @code{.org @var{new-lc}, @var{fill}}
-* P2align:: @code{.p2align @var{abs-expr}, @var{abs-expr}, @var{abs-expr}}
+* P2align:: @code{.p2align [@var{abs-expr}[, @var{abs-expr}[, @var{abs-expr}]]]}
@ifset ELF
* PopSection:: @code{.popsection}
* Previous:: @code{.previous}
@end ifset
@node Align
-@section @code{.align @var{abs-expr}, @var{abs-expr}, @var{abs-expr}}
+@section @code{.align [@var{abs-expr}[, @var{abs-expr}[, @var{abs-expr}]]]}
@cindex padding the location counter
@cindex @code{align} directive
Pad the location counter (in the current subsection) to a particular storage
boundary. The first expression (which must be absolute) is the alignment
-required, as described below.
+required, as described below. If this expression is omitted then a default
+value of 0 is used, effectively disabling alignment requirements.
The second expression (also absolute) gives the fill value to be stored in the
padding bytes. It (and the comma) may be omitted. If it is omitted, the
The way the required alignment is specified varies from system to system.
For the arc, hppa, i386 using ELF, iq2000, m68k, or1k,
-s390, sparc, tic4x, tic80 and xtensa, the first expression is the
+s390, sparc, tic4x and xtensa, the first expression is the
alignment request in bytes. For example @samp{.align 8} advances
the location counter until it is a multiple of 8. If the location counter
is already a multiple of 8, no change is needed. For the tic54x, the
a zero byte. The ``z'' in @samp{.asciz} stands for ``zero''.
@node Balign
-@section @code{.balign[wl] @var{abs-expr}, @var{abs-expr}, @var{abs-expr}}
+@section @code{.balign[wl] [@var{abs-expr}[, @var{abs-expr}[, @var{abs-expr}]]]}
@cindex padding the location counter given number of bytes
@cindex @code{balign} directive
storage boundary. The first expression (which must be absolute) is the
alignment request in bytes. For example @samp{.balign 8} advances
the location counter until it is a multiple of 8. If the location counter
-is already a multiple of 8, no change is needed.
+is already a multiple of 8, no change is needed. If the expression is omitted
+then a default value of 0 is used, effectively disabling alignment requirements.
The second expression (also absolute) gives the fill value to be stored in the
padding bytes. It (and the comma) may be omitted. If it is omitted, the
@var{fill} defaults to zero.
@node P2align
-@section @code{.p2align[wl] @var{abs-expr}, @var{abs-expr}, @var{abs-expr}}
+@section @code{.p2align[wl] [@var{abs-expr}[, @var{abs-expr}[, @var{abs-expr}]]]}
@cindex padding the location counter given a power of two
@cindex @code{p2align} directive
number of low-order zero bits the location counter must have after
advancement. For example @samp{.p2align 3} advances the location
counter until it is a multiple of 8. If the location counter is already a
-multiple of 8, no change is needed.
+multiple of 8, no change is needed. If the expression is omitted then a
+default value of 0 is used, effectively disabling alignment requirements.
The second expression (also absolute) gives the fill value to be stored in the
padding bytes. It (and the comma) may be omitted. If it is omitted, the
section is a GNU_MBIND section
@item e
section is excluded from executable and shared library.
+@item o
+section references a symbol defined in another section (the linked-to
+section) in the same file.
@item w
section is writable
@item x
@code{"def"} will be merged with @code{"abcdef"}; A reference to the first
@code{"def"} will be changed to a reference to @code{"abcdef"+3}.
+If @var{flags} contains the @code{o} flag, then the @var{type} argument
+must be present along with an additional field like this:
+
+@smallexample
+.section @var{name},"@var{flags}"o,@@@var{type},@var{SymbolName}
+@end smallexample
+
+The @var{SymbolName} field specifies the symbol name which the section
+references.
+
+Note: If both the @var{M} and @var{o} flags are present, then the fields
+for the Merge flag should come first, like this:
+
+@smallexample
+.section @var{name},"@var{flags}"Mo,@@@var{type},@var{entsize},@var{SymbolName}
+@end smallexample
+
If @var{flags} contains the @code{G} symbol then the @var{type} argument must
be present along with an additional field like this:
.section @var{name} , "@var{flags}"MG, @@@var{type}, @var{entsize}, @var{GroupName}[, @var{linkage}]
@end smallexample
+If both @code{o} flag and @code{G} flag are present, then the
+@var{SymbolName} field for @code{o} comes first, like this:
+
+@smallexample
+.section @var{name},"@var{flags}"oG,@@@var{type},@var{SymbolName},@var{GroupName}[,@var{linkage}]
+@end smallexample
+
If @var{flags} contains the @code{?} symbol then it may not also contain the
@code{G} symbol and the @var{GroupName} or @var{linkage} fields should not be
present. Instead, @code{?} says to consider the section that's current before
@code{G} with those same @var{GroupName} and @var{linkage} fields implicitly.
If not, then the @code{?} symbol has no effect.
+The optional @var{unique,@code{<number>}} argument must come last. It
+assigns @var{@code{<number>}} as a unique section ID to distinguish
+different sections with the same section name like these:
+
+@smallexample
+.section @var{name},"@var{flags}",@@@var{type},@var{unique,@code{<number>}}
+.section @var{name},"@var{flags}"G,@@@var{type},@var{GroupName},[@var{linkage}],@var{unique,@code{<number>}}
+.section @var{name},"@var{flags}"MG,@@@var{type},@var{entsize},@var{GroupName}[,@var{linkage}],@var{unique,@code{<number>}}
+@end smallexample
+
+The valid values of @var{@code{<number>}} are between 0 and 4294967295.
+
If no flags are specified, the default flags depend upon the section name. If
the section name is not recognized, the default will be for the section to have
none of the above flags: it will not be allocated in memory, nor writable, nor
file is the last value stored into it.
@ifset Z80
-On Z80 @code{set} is a real instruction, use
+On Z80 @code{set} is a real instruction, use @code{.set} or
@samp{@var{symbol} defl @var{expression}} instead.
@end ifset
projects / binutils-gdb.git / blobdiff