-@c Copyright 2002, 2004, 2005, 2011 Free Software Foundation, Inc.
+@c Copyright (C) 2002-2015 Free Software Foundation, Inc.
@c This is part of the GAS manual.
@c For copying conditions, see the file as.texinfo.
@ifset GENERIC
@cindex options for MSP430 (none)
@table @code
-@item -m
-select the mpu arch. Currently has no effect.
+@item -mmcu
+selects the mcu architecture. If the architecture is 430Xv2 then this
+also enables NOP generation unless the @option{-mN} is also specified.
+
+@item -mcpu
+selects the cpu architecture. If the architecture is 430Xv2 then this
+also enables NOP generation unless the @option{-mN} is also specified.
+
@item -mP
enables polymorph instructions handler.
@item -mQ
enables relaxation at assembly time. DANGEROUS!
+@item -ml
+indicates that the input uses the large code model.
+
+@item -mn
+enables the generation of a NOP instruction following any instruction
+that might change the interrupts enabled/disabled state. The
+pipelined nature of the MSP430 core means that any instruction that
+changes the interrupt state (@code{EINT}, @code{DINT}, @code{BIC #8,
+SR}, @code{BIS #8, SR} or @code{MOV.W <>, SR}) must be
+followed by a NOP instruction in order to ensure the correct
+processing of interrupts. By default it is up to the programmer to
+supply these NOP instructions, but this command line option enables
+the automatic insertion by the assembler, if they are missing.
+
+@item -mN
+disables the generation of a NOP instruction following any instruction
+that might change the interrupts enabled/disabled state. This is the
+default behaviour.
+
+@item -my
+tells the assembler to generate a warning message if a NOP does not
+immediately forllow an instruction that enables or disables
+interrupts. This is the default.
+
+Note that this option can be stacked with the @option{-mn} option so
+that the assembler will both warn about missing NOP instructions and
+then insert them automatically.
+
+@item -mY
+disables warnings about missing NOP instructions.
+
+@item -md
+mark the object file as one that requires data to copied from ROM to
+RAM at execution startup. Disabled by default.
+
@end table
@node MSP430 Syntax
This directive is ignored; it is accepted for compatibility with other
MSP 430 assemblers.
-@cindex @code{sect} directive, MSP 430
+@cindex @code{arch} directive, MSP 430
@item .arch
-Currently this directive is ignored; it is accepted for compatibility with other
-MSP 430 assemblers.
+Sets the target microcontroller in the same way as the @option{-mmcu}
+command line option.
+
+@cindex @code{cpu} directive, MSP 430
+@item .cpu
+Sets the target architecture in the same way as the @option{-mcpu}
+command line option.
@cindex @code{profiler} directive, MSP 430
@item .profiler
This directive instructs assembler to add new profile entry to the object file.
+@cindex @code{refsym} directive, MSP 430
+@item .refsym
+This directive instructs assembler to add an undefined reference to
+the symbol following the directive. The maximum symbol name length is
+1023 characters. No relocation is created for this symbol; it will
+exist purely for pulling in object files from archives. Note that
+this reloc is not sufficient to prevent garbage collection; use a
+KEEP() directive in the linker file to preserve such objects.
+
@end table
@node MSP430 Opcodes