+Thu Jan 21 19:44:55 1999 Michael Meissner <meissner@cygnus.com>
+
+ * configure.in ({rs6000|powerpc}-ibm-aix4.[12]*): If
+ --with-gnu-ld, use x-aix41-gld instead of x-aix41 to suppress
+ adding -Wl,-bbigtoc to BOOT_LDFLAGS.
+ * configure: Regenerate.
+
+ * config/rs6000/x-aix41-gld: New file, don't set BOOT_LDFLAGS.
+
+Thu Jan 21 15:48:03 1999 Dave Brolley <brolley@cygnus.com>
+
+ * cppexp.c (cpp_lex): Allocate token_buffer dynamically.
+
+Thu Jan 21 14:18:04 EST 1999 Andrew MacLeod <amacleod@cygnus.com>
+
+ * expr.c (MOVE_BY_PIECES_P): Define condition for deciding to use
+ move_by_pieces.
+ (MOVE_MAX_PIECES): Define maximum number of bytes to move at once.
+ (USE_LOAD_POST_INCREMENT, USE_LOAD_PRE_DECREMENT): Define defaults.
+ (USE_STORE_POST_INCREMENT, USE_STORE_PRE_DECREMENT): Define defaults.
+ (move_by_pieces): Use new macros.
+ (emit_block_move): Use new macros.
+ (clear_by_pieces): Use new macros.
+ (clear_storage): Use new macros.
+ (emit_push_insn): Use new macros.
+ (expand_expr): Use new macros.
+ * config/sh/sh.h (USE_LOAD_POST_INCREMENT, USE_LOAD_PRE_DECREMENT):
+ Define.
+ (USE_STORE_POST_INCREMENT, USE_STORE_PRE_DECREMENT): Define.
+ (MOVE_BY_PIECES_P): Define based on alignment and TARGET_SMALLCODE.
+ (MOVE_MAX_PIECES): move 8 bytes on SH4.
+ * tm.texi(MOVE_BY_PIECES_P, MOVE_MAX_PIECES, USE_LOAD_POST_INCREMENT,
+ USE_LOAD_PRE_DECREMENT, USE_STORE_POST_INCREMENT,
+ USE_STORE_PRE_DECREMENT): Describe new macros.
+
+Thu Jan 21 14:13:31 1999 Vladimir N. Makarov <vmakarov@cygnus.com>
+
+ * varasm.c (output_constant_pool): Use floor_log2 instead of
+ exact_log2 for ASM_OUTPUT_ALIGN.
+
+ * stor-layout.c (layout_type): Do machine-dependent extra alignment.
+
+ * emit-rtl.c (operand_subword): Handle case when a subword outside
+ the operand.
+
+ * tm.texi (ROUND_TYPE_{SIZE,ALIGN}): More accurate descriptions of
+ the macros.
+
+Thu Jan 21 01:59:30 1999 Richard Henderson <rth@cygnus.com>
+
+ * cse.c (fold_rtx): Revert 29 Dec change.
+ (cse_insn): Revert 12 Jan change.
+ * expr.c (expand_builtin): Don't emit CONST around CONSTANT_P_RTX.
+ * regclass.c (reg_scan_mark_refs): Revert 29 Dec change.
+ * rtl.def: Likewise.
+ * rtl.h (CONSTANT_P): Likewise.
+
+ * expr.c (emit_move_insn): Never try to flush CONSTANT_P_RTX
+ to memory.
+ * recog.c (immediate_operand): Accept CONSTANT_P_RTX.
+ * alpha.c (input_operand): Likewise.
+ * c4x.c (const_operand): Likewise.
+
+ * explow.c (allocate_dynamic_stack_space): Use register_operand
+ instead of arith_operand, which does not exist.
+
+ * 1750a.h: Fix comment closure.
+ * a29k.c (a29k_set_memflags): Fix typo in 19 Jan change.
+ * arc.md (one_cmplsi2_set_cc_insn): Fix set mode mismatch.
+ * arm.h (TARGET_SWITCHES): Fix typo.
+ * i370.md (anon mult and div patterns): Fix set mode mismatch.
+ * i860.c (output_delayed_branch): Fix operands to constrain_operands.
+ (output_delay_insn): Likewise.
+ * m88k.md (anon rotate insns): Fix set mode mismatch.
+ (anon BLKmode moves): Commonize and fix set mode mismatches.
+ * ns32k.md (udivmoddi[shq]i4_internal): Fix mode mismatch.
+ * romp.md (movdf): Fix typo.
+
+Thu Jan 21 00:29:35 1999 Nathan Sidwell <nathan@acm.org>
+
+ * Makefile.in (install-common): Remove extraneous chmod for gcov
+ install.
+
+Wed Jan 20 18:15:08 1999 Dave Brolley <brolley@cygnus.com>
+
+ * function.c (assign_parms): Save and restore setting of
+ TREE_USED (parm).
+
+Wed Jan 20 12:51:42 1999 Mark Mitchell <mark@markmitchell.com>
+
+ * arm.md: Use MEM_COPY_ATTRIBUTES where appropriate throughout.
+ Pass MEM_SCALAR_P to arm_gen_store_multiple where appropriate.
+
+Tue Jan 19 21:20:52 1999 Richard Henderson <rth@cygnus.com>
+
+ * recog.c (pop_operand): New function.
+ * recog.h (pop_operand): Declare it.
+ * genrecog.c (preds): Define it.
+
+ * expr.c (do_jump_for_compare): Handle conditional branch expanders
+ emitting multiple jump instructions.
+ * jump.c (condjump_label): New function.
+ * rtl.h (condjump_label): Declare it.
+
+Tue Jan 19 21:08:20 1999 Richard Henderson <rth@cygnus.com>
+
+ * expr.c (emit_move_insn_1): Revert 17 Dec change. Don't emit
+ clobber during or after reload.
+
+Tue Jan 19 16:56:03 1999 Richard Henderson <rth@cygnus.com>
+
+ * genoutput.c (name_for_index): New function.
+ (scan_operands, validate_insn_alternatives): Use it.
+ * genrecog.c (insn_name_ptr_size): New variable.
+ (make_insn_sequence): Fill in insn_name_ptr.
+ (merge_trees): Use it.
+
+Tue Jan 19 16:37:36 1999 Richard Henderson <rth@cygnus.com>
+
+ * i386/isc.h (TARGET_DEFAULT): Define symbolicly.
+ * i386/isccoff.h, i386/next.h, i386/sco.h, i386/sco5.h: Likewise.
+ * i386/scodbx.h, i386/sequent.h, i386.unix.h: Likewise.
+
Tue Jan 19 15:00:10 1999 Jeffrey A Law (law@cygnus.com)
+ * loop.c (NUM_STORES): Delete.
+ (loop_store_mems): Turn into an EXPR_LIST of MEMs.
+ (prescan_loop): Properly initialize loop_mems_idx.
+ (note_addr_stored): Simplify using list structure instead of
+ fixed sized array.
+ (invariant_p, check_dbra_loop, load_mems): Similarly.
+
+ * flow.c (invalidate_from_autoinc): New function.
+ (mark_set_1, mark_used_regs): Use it.
+
* Makefile.in (protoize.o, unprotoize.o): Depend on Makefile.
1999-01-19 Vladimir N. Makarov <vmakarov@cygnus.com>
projects / gcc.git / blobdiff