# Makefile for GNU C compiler.
# Copyright (C) 1987, 1988, 1990, 1991, 1992, 1993, 1994, 1995
-# 1996, 1997, 1998, 1999, 2000 Free Software Foundation, Inc.
+# 1996, 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
#This file is part of GNU CC.
# This is overridden by configure.
BOOT_LANGUAGES = c @all_boot_languages@
-ALLOCA =
-ALLOCA_FLAGS =
-ALLOCA_FINISH = true
-
# Various ways of specifying flags for compilations:
-# CFLAGS is for the user to override to, e.g., do a bootstrap with -O2.
-# BOOT_CFLAGS is the value of CFLAGS to pass to the stage2 and stage3
-# compilations.
+# CFLAGS is for the user to override to, e.g., do a cross build with -O2.
+# For recursive bootstrap builds CFLAGS is used to pass in STAGE1_CFLAGS
+# or BOOT_CFLAGS
+# STAGE1_CFLAGS is set by configure on some targets or passed from toplevel
+# and sets the CFLAGS passed to stage1 of a bootstrap compilation.
+# BOOT_CFLAGS is the value of CFLAGS to pass to the stage2, stage3 and stage4
+# bootstrap compilations.
# XCFLAGS is used for most compilations but not when using the GCC just built.
# TCFLAGS is used for compilations with the GCC just built.
-# STAGE1_CFLAGS is set by configure on some targets.
XCFLAGS =
TCFLAGS =
-BOOT_CFLAGS = -g -O2
+CFLAGS = -g
STAGE1_CFLAGS = -g @stage1_cflags@
-CFLAGS = $(STAGE1_CFLAGS)
+BOOT_CFLAGS = -g -O2
# The warning flags are separate from BOOT_CFLAGS because people tend to
# override optimization flags and we'd like them to still have warnings
AR = ar
AR_FLAGS = rc
DLLTOOL = dlltool
+RANLIB = @RANLIB@
SHELL = /bin/sh
# on sysV, define this as cp.
INSTALL = @INSTALL@
MAKEINFO = @MAKEINFO@
MAKEINFOFLAGS =
TEXI2DVI = texi2dvi
-TEXI2POD = $(srcdir)/../contrib/texi2pod.pl
+TEXI2POD = perl $(srcdir)/../contrib/texi2pod.pl
POD2MAN = pod2man --center="GNU" --release="gcc-$(version)" --section=1
# For GNUmake: let us decide what gets passed to recursive makes.
MAKEOVERRIDES =
# In stage2 and beyond, we force this to "-o $@" since we know we're using gcc.
OUTPUT_OPTION = @OUTPUT_OPTION@
+# Some versions of `touch' (such as the version on Solaris 2.8)
+# do not correctly set the timestamp due to buggy versions of `utime'
+# in the kernel. So, we use `echo' instead.
+STAMP = echo timestamp >
+
# This is where we get zlib from. zlibdir is -L../zlib and zlibinc is
# -I../zlib, unless we were configured with --with-system-zlib, in which
# case both are empty.
ZLIB = @zlibdir@ -lz
ZLIBINC = @zlibinc@
-# How to invoke ranlib.
-RANLIB = ranlib
-# Test to use to see whether ranlib exists on the system.
-RANLIB_TEST = \
- [ -f $(RANLIB) ] \
- || [ -f /usr/bin/ranlib -o -f /bin/ranlib ]
-
# Substitution type for target's getgroups 2nd arg.
TARGET_GETGROUPS_T = @TARGET_GETGROUPS_T@
-# Compiler to use for compiling libgcc1.a.
-# OLDCC should not be the GNU C compiler,
-# since that would compile typical libgcc1.a functions such as mulsi3
-# into infinite recursions.
-OLDCC = cc
-
-# CFLAGS for use with OLDCC, for compiling libgcc1.a.
-# NOTE: -O does not work on some Unix systems!
-CCLIBFLAGS = -O
-
-# Version of ar to use when compiling libgcc1.a.
-OLDAR = ar
-OLDAR_FLAGS = qc
-
# Target to use when installing include directory. Either
# install-headers-tar or install-headers-cpio.
INSTALL_HEADERS_DIR = @build_install_headers_dir@
$(srcdir)/ginclude/stdbool.h $(srcdir)/ginclude/iso646.h \
$(EXTRA_HEADERS) $(LANG_EXTRA_HEADERS)
-# Target to use whe installing assert.h. Some systems may
-# want to set this empty.
-INSTALL_ASSERT_H = install-assert-h
-
-# The GCC to use for compiling libgcc.a, enquire, and libgcc1-test.
+# The GCC to use for compiling libgcc.a, enquire, and crt*.o.
# Usually the one we just built.
# Don't use this as a dependency--use $(GCC_PASSES) or $(GCC_PARTS).
GCC_FOR_TARGET = ./xgcc -B./ -B$(build_tooldir)/bin/ -isystem $(build_tooldir)/include
# It also specifies -isystem ./include to find, e.g., stddef.h.
GCC_CFLAGS=$(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(LOOSE_WARN) -isystem ./include $(TCFLAGS)
-# Specify the abi to use when building the c++ runtime
-GXX_ABI_FLAG=@GXX_ABI_FLAG@
-
# Sed command to transform gcc to installed name. Overwritten by configure.
program_transform_name = @program_transform_name@
program_transform_cross_name = s,^,$(target_alias)-,
t='$(program_transform_cross_name)'; echo ar | sed -e $$t ; \
fi; \
fi`
-AR_FLAGS_FOR_TARGET =
+AR_FLAGS_FOR_TARGET =
AR_CREATE_FOR_TARGET = $(AR_FOR_TARGET) $(AR_FLAGS_FOR_TARGET) rc
AR_EXTRACT_FOR_TARGET = $(AR_FOR_TARGET) $(AR_FLAGS_FOR_TARGET) x
RANLIB_FOR_TARGET = ` \
|| ( [ "$(host_canonical)" = "$(target)" ] \
&& [ -f /usr/bin/ranlib -o -f /bin/ranlib ] )
NM_FOR_TARGET = ` \
- if [ -f $(objdir)/../binutils/nm ] ; then \
- echo $(objdir)/../binutils/nm ; \
+ if [ -f ./nm ] ; then \
+ echo ./nm ; \
+ elif [ -f $(objdir)/../binutils/nm-new ] ; then \
+ echo $(objdir)/../binutils/nm-new ; \
else \
if [ "$(host_canonical)" = "$(target)" ] ; then \
echo nm; \
out_file=$(srcdir)/config/@out_file@
out_object_file=@out_object_file@
md_file=$(srcdir)/config/@md_file@
-tm_file=@tm_file_list@
-build_xm_file=@build_xm_file_list@
-host_xm_file=@host_xm_file_list@
+tm_p_file_list=@tm_p_file_list@
+tm_p_file=@tm_p_file@
+build_xm_file_list=@build_xm_file_list@
+build_xm_file=@build_xm_file@
+build_xm_defines=@build_xm_defines@
+host_xm_file_list=@host_xm_file_list@
+host_xm_file=@host_xm_file@
+host_xm_defines=@host_xm_defines@
+xm_file=@xm_file@
+xm_defines=@xm_defines@
lang_specs_files=@lang_specs_files@
lang_options_files=@lang_options_files@
lang_tree_files=@lang_tree_files@
+target_cpu_default=@target_cpu_default@
GCC_THREAD_FILE=@thread_file@
OBJC_BOEHM_GC=@objc_boehm_gc@
GTHREAD_FLAGS=@gthread_flags@
dollar = @dollar@
# Used in install-cross.
gcc_tooldir = @gcc_tooldir@
+# Used to install the shared libgcc.
+slibdir = @slibdir@
# Since tooldir does not exist at build-time, use -B$(build_tooldir)/bin/
build_tooldir = $(exec_prefix)/$(target_alias)
# Directory in which the compiler finds target-independent g++ includes.
gcc_gxx_include_dir = @gcc_gxx_include_dir@
-# Directory in which the compiler finds target-dependent g++ includes.
-gcc_gxx_target_include_dir = $(build_tooldir)/include/@libstdcxx_incdir@
# Directory to search for site-specific includes.
includedir = $(local_prefix)/include
-# assertdir is overridden in cross-make.
-# (But this currently agrees with what is in cross-make.)
-assertdir = $(gcc_tooldir)/include
# where the info files go
infodir = @infodir@
# Where cpp should go besides $prefix/bin if necessary
POSUB = @POSUB@
INTL_SUBDIRS = intl $(POSUB)
-# Additional system libraries to link with.
-CLIB=
-
# Change this to a null string if obstacks are installed in the
# system library.
OBSTACK=obstack.o
# Configure will set these if you need vfprintf and possibly _doprnt support.
VFPRINTF=@vfprintf@
DOPRINT=@doprint@
+STRSTR=@strstr@
-# Specify the rule for actually making libgcc.a,
+# libgcc.a may be built directly or via stmp-multilib,
+# and installed likewise. Overridden by t-fragment.
LIBGCC = libgcc.a
-# and the rule for installing it.
INSTALL_LIBGCC = install-libgcc
-# Specify the rule for actually making libgcc1.a.
-# The value may be empty; that means to do absolutely nothing
-# with or for libgcc1.a.
-LIBGCC1 = libgcc1.a
-
-# Specify the rule for making libgcc1.a for a cross-compiler.
-# The default rule assumes that libgcc1.a is supplied by the user.
-CROSS_LIBGCC1 = libgcc1.cross
-
# Options to use when compiling libgcc2.a.
# -g1 causes output of debug info only for file-scope entities.
# we use this here because that should be enough, and also
# Additional target-dependent options for compiling libgcc2.a.
TARGET_LIBGCC2_CFLAGS =
-# Additional sources to handle exceptions; overridden by some targets.
-LIB2ADDEH = $(srcdir)/frame-dwarf2.c
-
-# libgcc1-test target (must also be overridable for a target)
-LIBGCC1_TEST = libgcc1-test
+# Additional sources to handle exceptions; overridden on ia64.
+LIB2ADDEH = $(srcdir)/unwind-dw2.c $(srcdir)/unwind-dw2-fde.c \
+ $(srcdir)/unwind-sjlj.c
+LIB2ADDEHDEP = unwind.inc unwind-dw2-fde.h
# nm flags to list global symbols in libgcc object files.
SHLIB_NM_FLAGS = -pg
USE_COLLECT2 = @will_use_collect2@
# If we might be using collect2, then this variable will be set to
# -DUSE_COLLECT2. toplev.c, collect2.c and libgcc2.c all need to
-# if we may be using collect2.
+# know if we may be using collect2.
MAYBE_USE_COLLECT2 = @maybe_use_collect2@
# It is convenient for configure to add the assignment at the beginning,
# so don't override it here.
USE_COLLECT2 = collect2$(exeext)
-# List of extra C and assembler files to add to libgcc1.a.
+# List of extra C and assembler files to add to static and shared libgcc2.
# Assembler files should have names ending in `.asm'.
-LIB1FUNCS_EXTRA =
+LIB2FUNCS_EXTRA =
-# List of extra C and assembler files to add to libgcc2.a.
+# List of extra C and assembler files to add to static libgcc2.
# Assembler files should have names ending in `.asm'.
-LIB2FUNCS_EXTRA =
+LIB2FUNCS_STATIC_EXTRA =
# Handle cpp installation.
INSTALL_CPP=
# Control whether Info documentation is built and installed.
BUILD_INFO = @BUILD_INFO@
+# Control whether manpages generated by texi2pod.pl can be rebuilt.
+GENERATED_MANPAGES = @GENERATED_MANPAGES@
+
# Additional directories of header files to run fixincludes on.
# These should be directories searched automatically by default
# just as /usr/include is.
# out of the way of the other rules for compiling the same source files.
HOST_PREFIX_1=loser-
HOST_CC=$(CC)
+# If you change any of the following variables, check whether a
+# similar change is needed in build-make.
HOST_CFLAGS=$(ALL_CFLAGS) -DGENERATOR_FILE
-HOST_CLIB=$(CLIB)
HOST_LDFLAGS=$(LDFLAGS)
HOST_CPPFLAGS=$(ALL_CPPFLAGS)
-HOST_ALLOCA=$(ALLOCA)
-HOST_MALLOC=$(MALLOC)
HOST_OBSTACK=$(OBSTACK)
HOST_VFPRINTF=$(VFPRINTF)
HOST_DOPRINT=$(DOPRINT)
+HOST_STRSTR=$(STRSTR)
# Actual name to use when installing a native compiler.
GCC_INSTALL_NAME = `t='$(program_transform_name)'; echo gcc | sed -e $$t`
# This tells GNU Make version 3 not to put all variables in the environment.
.NOEXPORT:
+# GCONFIG_H lists the config files that the generator files depend on, while
+# CONFIG_H lists the the ones ordinary gcc files depend on, which includes
+# a file generated by gencodes.
+GCONFIG_H = config.h $(host_xm_file_list)
+HCONFIG_H = hconfig.h $(build_xm_file_list)
+CONFIG_H = $(GCONFIG_H) insn-codes.h insn-flags.h
+TCONFIG_H = tconfig.h $(xm_file_list) insn-codes.h
+TM_P_H = tm_p.h $(tm_p_file_list) insn-codes.h
+
+MACHMODE_H = machmode.h machmode.def
+RTL_BASE_H = rtl.h rtl.def $(MACHMODE_H)
+RTL_H = $(RTL_BASE_H) genrtl.h
+TREE_H = tree.h real.h tree.def $(MACHMODE_H) tree-check.h version.h builtins.def
+BASIC_BLOCK_H = basic-block.h bitmap.h sbitmap.h varray.h
+DEMANGLE_H = $(srcdir)/../include/demangle.h
+RECOG_H = recog.h
+EXPR_H = expr.h insn-codes.h
+REGS_H = regs.h varray.h $(MACHMODE_H)
+INTEGRATE_H = integrate.h varray.h
+LOOP_H = loop.h varray.h bitmap.h
+GCC_H = gcc.h version.h
+GGC_H = ggc.h varray.h
+TIMEVAR_H = timevar.h timevar.def
+INSN_ATTR_H = insn-attr.h $(srcdir)/insn-addr.h $(srcdir)/varray.h
+C_COMMON_H = c-common.h $(SPLAY_TREE_H)
+C_TREE_H = c-tree.h $(C_COMMON_H)
+SYSTEM_H = system.h hwint.h $(srcdir)/../include/libiberty.h
+
# sed inserts variable overrides after the following line.
####target overrides
@target_overrides@
# Likewise.
ALL_CPPFLAGS = $(CPPFLAGS) $(X_CPPFLAGS) $(T_CPPFLAGS)
-# Even if ALLOCA is set, don't use it if compiling with GCC.
-USE_ALLOCA= ${ALLOCA}
-USE_HOST_ALLOCA= ` case "${HOST_ALLOCA}" in ?*) echo ${HOST_PREFIX}${HOST_ALLOCA} ;; esac `
-USE_HOST_MALLOC= ` case "${HOST_MALLOC}" in ?*) echo ${HOST_PREFIX}${HOST_MALLOC} ;; esac `
USE_HOST_OBSTACK= ` case "${HOST_OBSTACK}" in ?*) echo ${HOST_PREFIX}${HOST_OBSTACK} ;; esac `
USE_HOST_VFPRINTF= ` case "${HOST_VFPRINTF}" in ?*) echo ${HOST_PREFIX}${HOST_VFPRINTF} ;; esac `
USE_HOST_DOPRINT= ` case "${HOST_DOPRINT}" in ?*) echo ${HOST_PREFIX}${HOST_DOPRINT} ;; esac `
+USE_HOST_STRSTR= ` case "${HOST_STRSTR}" in ?*) echo ${HOST_PREFIX}${HOST_STRSTR} ;; esac `
-# Dependency on obstack, alloca, malloc or whatever library facilities
+# Dependency on obstack or whatever library facilities
# are not installed in the system libraries.
-# We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
-LIBDEPS= $(INTLLIBS) $(OBSTACK) $(ALLOCA) $(MALLOC) $(VFPRINTF) $(DOPRINT)
+# We don't use USE_* because backquote expansion doesn't work in deps.
+LIBDEPS= $(INTLLIBS) $(OBSTACK) $(VFPRINTF) $(DOPRINT) $(STRSTR)
# Likewise, for use in the tools that must run on this machine
# even if we are cross-building GCC.
-# We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
-HOST_LIBDEPS= $(HOST_PREFIX)$(HOST_OBSTACK) $(HOST_PREFIX)$(HOST_ALLOCA) $(HOST_PREFIX)$(HOST_MALLOC) $(HOST_PREFIX)$(HOST_VFPRINTF) $(HOST_PREFIX)$(HOST_DOPRINT)
+HOST_LIBDEPS= $(HOST_PREFIX)$(HOST_OBSTACK) \
+ $(HOST_PREFIX)$(HOST_VFPRINTF) $(HOST_PREFIX)$(HOST_DOPRINT) \
+ $(HOST_PREFIX)$(HOST_STRSTR)
# How to link with both our special library facilities
# and the system's installed libraries.
-LIBS = $(OBSTACK) $(USE_ALLOCA) $(MALLOC) $(INTLLIBS) @LIBS@ $(VFPRINTF) $(DOPRINT) $(CLIB) ../libiberty/libiberty.a
+LIBS = $(OBSTACK) $(INTLLIBS) @LIBS@ $(VFPRINTF) $(DOPRINT) \
+ $(STRSTR) ../libiberty/libiberty.a
# Likewise, for use in the tools that must run on this machine
# even if we are cross-building GCC.
-HOST_LIBS = $(USE_HOST_OBSTACK) $(USE_HOST_ALLOCA) $(USE_HOST_MALLOC) \
- $(USE_HOST_VFPRINTF) $(USE_HOST_DOPRINT) $(HOST_CLIB)
+HOST_LIBS = $(USE_HOST_OBSTACK) $(USE_HOST_VFPRINTF) \
+ $(USE_HOST_DOPRINT) $(USE_HOST_STRSTR)
HOST_RTL = $(HOST_PREFIX)rtl.o $(HOST_PREFIX)bitmap.o \
$(HOST_PREFIX)ggc-none.o gensupport.o hashtab.o safe-ctype.o
# Specify the directories to be searched for header files.
# Both . and srcdir are used, in that order,
-# so that tm.h and config.h will be found in the compilation
+# so that *config.h will be found in the compilation
# subdirectory rather than in the source directory.
# -I$(@D) and -I$(srcdir)/$(@D) cause the subdirectory of the file
# currently being compiled, in both source trees, to be examined as well.
"BISON=$(BISON)" \
"BISONFLAGS=$(BISONFLAGS)" \
"CFLAGS=$(CFLAGS) $(WARN_CFLAGS)" \
- "CLIB=$(CLIB)" \
"GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
"LDFLAGS=$(LDFLAGS)" \
"FLEX=$(FLEX)" \
"LN_S=$(LN_S)" \
"MAKEINFO=$(MAKEINFO)" \
"MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
+ "MAKEOVERRIDES=" \
"RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
"RANLIB_TEST_FOR_TARGET=$(RANLIB_TEST_FOR_TARGET)" \
"SHELL=$(SHELL)" \
# Language-specific object files for C and Objective C.
C_AND_OBJC_OBJS = c-errors.o c-lex.o c-pragma.o c-decl.o c-typeck.o \
- c-convert.o c-aux-info.o c-common.o c-semantics.o c-dump.o libcpp.a \
- $(C_TARGET_OBJS)
+ c-convert.o c-aux-info.o c-common.o c-format.o c-semantics.o c-dump.o \
+ libcpp.a $(C_TARGET_OBJS)
# Language-specific object files for C.
C_OBJS = c-parse.o c-lang.o $(C_AND_OBJC_OBJS)
# Language-independent object files.
-OBJS = diagnostic.o version.o tree.o print-tree.o stor-layout.o fold-const.o \
- function.o stmt.o except.o expr.o calls.o expmed.o explow.o optabs.o real.o \
- builtins.o intl.o varasm.o rtl.o print-rtl.o rtlanal.o emit-rtl.o genrtl.o \
- dbxout.o sdbout.o dwarfout.o dwarf2out.o xcoffout.o bitmap.o alias.o gcse.o \
- integrate.o jump.o cse.o loop.o doloop.o unroll.o flow.o combine.o varray.o \
- regclass.o regmove.o local-alloc.o global.o reload.o reload1.o caller-save.o \
- insn-peep.o reorg.o haifa-sched.o final.o recog.o reg-stack.o regrename.o \
- insn-opinit.o insn-recog.o insn-extract.o insn-output.o insn-emit.o lcm.o \
- profile.o insn-attrtab.o $(out_object_file) $(EXTRA_OBJS) convert.o \
- mbchar.o splay-tree.o graph.o sbitmap.o resource.o hash.o predict.o \
- lists.o ggc-common.o $(GGC) stringpool.o simplify-rtx.o ssa.o bb-reorder.o \
- sibcall.o conflict.o timevar.o ifcvt.o dominance.o dependence.o dce.o \
- sched-vis.o sched-deps.o sched-rgn.o sched-ebb.o hashtab.o
-
-BACKEND = toplev.o libbackend.a
+OBJS = \
+ alias.o bb-reorder.o bitmap.o builtins.o caller-save.o calls.o \
+ combine.o conflict.o convert.o cse.o cselib.o dbxout.o dce.o \
+ dependence.o diagnostic.o doloop.o dominance.o dwarf2asm.o dwarf2out.o \
+ dwarfout.o emit-rtl.o except.o explow.o expmed.o expr.o final.o flow.o \
+ fold-const.o function.o gcse.o genrtl.o ggc-common.o global.o graph.o \
+ haifa-sched.o hash.o hashtable.o ifcvt.o insn-attrtab.o insn-emit.o \
+ insn-extract.o insn-opinit.o insn-output.o insn-peep.o insn-recog.o \
+ integrate.o intl.o jump.o lcm.o lists.o local-alloc.o loop.o mbchar.o \
+ optabs.o params.o predict.o print-rtl.o print-tree.o profile.o real.o \
+ recog.o reg-stack.o regclass.o regmove.o regrename.o reload.o \
+ reload1.o reorg.o resource.o rtl.o rtlanal.o sbitmap.o sched-deps.o \
+ sched-ebb.o sched-rgn.o sched-vis.o sdbout.o sibcall.o simplify-rtx.o \
+ splay-tree.o ssa.o stmt.o stor-layout.o stringpool.o timevar.o \
+ toplev.o tree.o unroll.o varasm.o varray.o version.o xcoffout.o \
+ $(GGC) $(out_object_file) $(EXTRA_OBJS)
+
+BACKEND = main.o libbackend.a
# GEN files are listed separately, so they can be built before doing parallel
# makes for cc1 or cc1plus. Otherwise sequent parallel make attempts to load
gcov$(exeext) *.[0-9][0-9].* *.[si] libcpp.a libbackend.a libgcc.mk \
$(LANG_STAGESTUFF)
-# Members of libgcc1.a.
-LIB1FUNCS = _mulsi3 _udivsi3 _divsi3 _umodsi3 _modsi3 \
- _lshrsi3 _ashrsi3 _ashlsi3 \
- _divdf3 _muldf3 _negdf2 _adddf3 _subdf3 \
- _fixdfsi _fixsfsi _floatsidf _floatsisf _truncdfsf2 _extendsfdf2 \
- _addsf3 _negsf2 _subsf3 _mulsf3 _divsf3 \
- _eqdf2 _nedf2 _gtdf2 _gedf2 _ltdf2 _ledf2 \
- _eqsf2 _nesf2 _gtsf2 _gesf2 _ltsf2 _lesf2
-
# Library members defined in libgcc2.c.
LIB2FUNCS = _muldi3 _divdi3 _moddi3 _udivdi3 _umoddi3 _negdi2 \
_lshrdi3 _ashldi3 _ashrdi3 _ffsdi2 _clz \
_fixunsdfsi _fixunssfsi _fixunsdfdi _fixdfdi _fixunssfdi _fixsfdi \
_fixxfdi _fixunsxfdi _floatdixf _fixunsxfsi \
_fixtfdi _fixunstfdi _floatditf \
- __gcc_bcmp _varargs __dummy _eprintf \
- _bb _clear_cache _trampoline __main _exit \
+ __gcc_bcmp _bb _clear_cache _trampoline __main _exit \
_absvsi2 _absvdi2 _addvsi3 _addvdi3 _subvsi3 _subvdi3 \
_mulvsi3 _mulvdi3 _negvsi2 _negvdi2 \
_ctors
-LIB2FUNCS_EH = _eh
+# Defined in libgcc2.c, included only in the static library.
+LIB2FUNCS_ST = _eprintf
FPBIT_FUNCS = _pack_sf _unpack_sf _addsub_sf _mul_sf _div_sf \
_fpcmp_parts_sf _compare_sf _eq_sf _ne_sf _gt_sf _ge_sf \
_lt_df _le_df _unord_df _si_to_df _df_to_si _negate_df _make_df \
_df_to_sf _thenan_df _df_to_usi _usi_to_df
-# GCONFIG_H lists the config files that the generator files depend on, while
-# CONFIG_H lists the the ones ordinary gcc files depend on, which includes
-# a file generated by gencodes.
-# The files that "belong" in GCONFIG_H are deliberately omitted
-# because having them there would not be useful in actual practice.
-# All they would do is cause complete recompilation every time
-# one of the machine description files is edited.
-# That may or may not be what one wants to do.
-# If it is, rm *.o is an easy way to do it.
-# GCONFIG_H = $(host_xm_file) $(tm_file)
-GCONFIG_H =
-CONFIG_H = $(GCONFIG_H) insn-codes.h
-MACHMODE_H = machmode.h machmode.def
-RTL_BASE_H = rtl.h rtl.def $(MACHMODE_H)
-RTL_H = $(RTL_BASE_H) genrtl.h
-TREE_H = tree.h real.h tree.def $(MACHMODE_H) tree-check.h version.h builtins.def
-BASIC_BLOCK_H = basic-block.h bitmap.h sbitmap.h varray.h
-DEMANGLE_H = $(srcdir)/../include/demangle.h
-RECOG_H = recog.h
-EXPR_H = expr.h insn-codes.h
-REGS_H = regs.h varray.h $(MACHMODE_H)
-INTEGRATE_H = integrate.h varray.h
-LOOP_H = loop.h varray.h bitmap.h
-GCC_H = gcc.h version.h
-GGC_H = ggc.h varray.h
-TIMEVAR_H = timevar.h timevar.def
-INSN_ATTR_H = insn-attr.h $(srcdir)/insn-addr.h $(srcdir)/varray.h
-C_COMMON_H = c-common.h $(SPLAY_TREE_H)
-C_TREE_H = c-tree.h $(C_COMMON_H)
-
#\f
# Language makefile fragments.
LANGUAGES="$(CONFIG_LANGUAGES)" $(SHELL) config.run
rm -f config.run
+config.h: cs-config.h ; @true
+hconfig.h: cs-hconfig.h ; @true
+tconfig.h: cs-tconfig.h ; @true
+tm_p.h: cs-tm_p.h ; @true
+
+cs-config.h: Makefile
+ HEADERS="$(host_xm_file)" DEFINES="$(host_xm_defines)" \
+ TARGET_CPU_DEFAULT="$(target_cpu_default)" \
+ $(SHELL) $(srcdir)/mkconfig.sh config.h
+
+cs-hconfig.h: Makefile
+ HEADERS="$(build_xm_file)" DEFINES="$(build_xm_defines)" \
+ TARGET_CPU_DEFAULT="$(target_cpu_default)" \
+ $(SHELL) $(srcdir)/mkconfig.sh hconfig.h
+
+cs-tconfig.h: Makefile $(CONFIG_H) except.h
+ HEADERS="$(xm_file)" DEFINES="$(xm_defines)" \
+ TARGET_CPU_DEFAULT="" \
+ $(SHELL) $(srcdir)/mkconfig.sh tconfig.h
+# ??? Need extra help to get this definition copied to where libgcc can
+# see it. It shouldn't matter which compiler we use to get there.
+ echo '#include "config.h"' > conftest.c
+ echo '#include "except.h"' >> conftest.c
+ echo 'xyzzy USING_SJLJ_EXCEPTIONS' >> conftest.c
+ $(HOST_CC) -E conftest.c $(ALL_CFLAGS) $(INCLUDES) > conftest.out
+ sed -e 's/xyzzy/#define USING_SJLJ_EXCEPTIONS/' -e '/#define/p' \
+ -e d conftest.out >> tconfig.h
+ rm conftest.*
+
+cs-tm_p.h: Makefile
+ HEADERS="$(tm_p_file)" DEFINES="" TARGET_CPU_DEFAULT="" \
+ $(SHELL) $(srcdir)/mkconfig.sh tm_p.h
+
$(srcdir)/configure: $(srcdir)/configure.in
(cd $(srcdir) && autoconf)
gccbug: $(srcdir)/gccbug.in
- CONFIG_FILES=gccbug CONFIG_HEADERS= ./config.status
+ CONFIG_FILES=gccbug CONFIG_HEADERS= ./config.status
mklibgcc: $(srcdir)/mklibgcc.in
- CONFIG_FILES=mklibgcc CONFIG_HEADERS= ./config.status
+ CONFIG_FILES=mklibgcc CONFIG_HEADERS= ./config.status
# cstamp-h.in controls rebuilding of config.in.
# It is named cstamp-h.in and not stamp-h.in so the mostlyclean rule doesn't
# Note that we can compile enquire using the cross-compiler just built,
# although we can't run it on this machine.
all.cross: native gcc-cross cpp$(exeext) specs \
- $(LIBGCC) $(LIBGCC1_TEST) $(EXTRA_PARTS) lang.all.cross doc
+ $(LIBGCC) $(EXTRA_PARTS) lang.all.cross doc
# This is what to compile if making gcc with a cross-compiler.
all.build: native xgcc$(exeext) cpp$(exeext) $(EXTRA_PARTS) lang.all.build
# This is what must be made before installing GCC and converting libraries.
# This does the things that can't be done on the host machine.
rest.cross: $(LIBGCC) specs
-# Verify that it works to compile and link libgcc1-test.
-# If it does, then there are sufficient replacements for libgcc1.a.
-libgcc1-test: libgcc1-test.o native $(GCC_PARTS)
- @echo "Testing libgcc1. Ignore linker warning messages."
- $(GCC_FOR_TARGET) $(GCC_CFLAGS) libgcc1-test.o -o libgcc1-test \
- -nostartfiles -nostdlib `$(GCC_FOR_TARGET) --print-libgcc-file-name`
-libgcc1-test.o: libgcc1-test.c native xgcc$(exeext)
- $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) -c $(srcdir)/libgcc1-test.c
-
# Recompile all the language-independent object files.
# This is used only if the user explicitly asks for it.
compilations: $(BACKEND)
libbackend.a: $(OBJS)
-rm -rf libbackend.a
$(AR) $(AR_FLAGS) libbackend.a $(OBJS)
- if $(RANLIB_TEST) ; then $(RANLIB) libbackend.a ; else true ; fi
+ -$(RANLIB) libbackend.a
# We call this executable `xgcc' rather than `gcc'
# to avoid confusion if the current directory is in the path
#\f
# Build libgcc.a.
-LIB2ADD = $(LIB2ADDEH) $(LIB2FUNCS_EXTRA)
+LIB2ADD = $(LIB2FUNCS_EXTRA)
+LIB2ADD_ST = $(LIB2FUNCS_STATIC_EXTRA)
-libgcc.mk: config.status Makefile mklibgcc $(LIB2ADD) xgcc$(exeext)
+libgcc.mk: config.status Makefile mklibgcc $(LIB2ADD) $(LIB2ADD_ST) xgcc$(exeext)
objext='$(objext)' \
- OLDCC='$(OLDCC)' \
- LIBGCC1='$(LIBGCC1)' \
- LIB1FUNCS='$(LIB1FUNCS)' \
LIB1ASMFUNCS='$(LIB1ASMFUNCS)' \
- LIB1FUNCS_EXTRA='$(LIB1FUNCS_EXTRA)' \
LIB2FUNCS='$(LIB2FUNCS)' \
- LIB2FUNCS_EH='$(LIB2FUNCS_EH)' \
+ LIB2FUNCS_ST='$(LIB2FUNCS_ST)' \
LIB2ADD='$(LIB2ADD)' \
+ LIB2ADD_ST='$(LIB2ADD_ST)' \
+ LIB2ADDEH='$(LIB2ADDEH)' \
+ LIB2ADDEHDEP='$(LIB2ADDEHDEP)' \
FPBIT='$(FPBIT)' \
FPBIT_FUNCS='$(FPBIT_FUNCS)' \
DPBIT='$(DPBIT)' \
MULTILIBS=`$(GCC_FOR_TARGET) --print-multi-lib` \
EXTRA_MULTILIB_PARTS='$(EXTRA_MULTILIB_PARTS)' \
SHLIB_LINK='$(SHLIB_LINK)' \
+ SHLIB_INSTALL='$(SHLIB_INSTALL)' \
SHLIB_EXT='$(SHLIB_EXT)' \
SHLIB_MULTILIB='$(SHLIB_MULTILIB)' \
SHLIB_MKMAP='$(SHLIB_MKMAP)' \
# All the things that might cause us to want to recompile bits of libgcc.
LIBGCC_DEPS = $(GCC_PASSES) $(LANGUAGES) stmp-int-hdrs $(STMP_FIXPROTO) \
- libgcc.mk $(srcdir)/libgcc1.c $(srcdir)/libgcc2.c $(CONFIG_H) \
- $(MACHMODE_H) longlong.h frame.h gbl-ctors.h config.status \
- stmp-int-hdrs tsystem.h $(FPBIT) $(DPBIT) $(LIB2ADD) $(EXTRA_PARTS)
+ libgcc.mk $(srcdir)/libgcc2.c $(TCONFIG_H) \
+ $(MACHMODE_H) longlong.h gbl-ctors.h config.status stmp-int-hdrs \
+ tsystem.h $(FPBIT) $(DPBIT) $(LIB2ADD) $(LIB2ADD_ST) $(LIB2ADDEH) \
+ $(LIB2ADDEHDEP) $(EXTRA_PARTS) $(srcdir)/config/$(LIB1ASMSRC)
libgcc.a: $(LIBGCC_DEPS)
$(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
AR_FOR_TARGET="$(AR_FOR_TARGET)" \
AR_CREATE_FOR_TARGET="$(AR_CREATE_FOR_TARGET)" \
AR_FLAGS_FOR_TARGET="$(AR_FLAGS_FOR_TARGET)" \
- OLDCC="$(OLDCC)" CCLIBFLAGS="$(CCLIBFLAGS)" \
CFLAGS="$(CFLAGS) $(WARN_CFLAGS)" \
RANLIB_FOR_TARGET="$(RANLIB_FOR_TARGET)" \
RANLIB_TEST_FOR_TARGET="$(RANLIB_TEST_FOR_TARGET)" \
NM_FOR_TARGET="$(NM_FOR_TARGET)" AWK="$(AWK)" \
LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" \
INCLUDES="$(INCLUDES)" MAYBE_USE_COLLECT2="$(MAYBE_USE_COLLECT2)" \
- CONFIG_H="$(CONFIG_H)" MACHMODE_H="$(MACHMODE_H)" \
+ CONFIG_H="$(TCONFIG_H)" MACHMODE_H="$(MACHMODE_H)" \
LIB1ASMSRC='$(LIB1ASMSRC)' \
+ MAKEOVERRIDES= \
-f libgcc.mk all
# Use the genmultilib shell script to generate the information the gcc
multilib.h: s-mlib; @true
s-mlib: $(srcdir)/genmultilib Makefile
$(SHELL) $(srcdir)/genmultilib \
- "$(MULTILIB_OPTIONS)" \
- "$(MULTILIB_DIRNAMES)" \
- "$(MULTILIB_MATCHES)" \
- "$(MULTILIB_EXCEPTIONS)" \
- "$(MULTILIB_EXTRA_OPTS)" \
- "$(MULTILIB_EXCLUSIONS)" > tmp-mlib.h
+ "`test @enable_multilib@ != yes || echo $(MULTILIB_OPTIONS)`" \
+ "`test @enable_multilib@ != yes || echo $(MULTILIB_DIRNAMES)`" \
+ "`test @enable_multilib@ != yes || echo $(MULTILIB_MATCHES)`" \
+ "`test @enable_multilib@ != yes || echo $(MULTILIB_EXCEPTIONS)`" \
+ "`test @enable_multilib@ != yes || echo $(MULTILIB_EXTRA_OPTS)`" \
+ "`test @enable_multilib@ != yes || echo $(MULTILIB_EXCLUSIONS)`" \
+ > tmp-mlib.h
$(SHELL) $(srcdir)/move-if-change tmp-mlib.h multilib.h
- touch s-mlib
+ $(STAMP) s-mlib
# Build multiple copies of libgcc.a, one for each target switch.
stmp-multilib: $(LIBGCC_DEPS)
AR_FOR_TARGET="$(AR_FOR_TARGET)" \
AR_CREATE_FOR_TARGET="$(AR_CREATE_FOR_TARGET)" \
AR_FLAGS_FOR_TARGET="$(AR_FLAGS_FOR_TARGET)" \
- OLDCC="$(OLDCC)" CCLIBFLAGS="$(CCLIBFLAGS)" \
CFLAGS="$(CFLAGS) $(WARN_CFLAGS)" \
RANLIB_FOR_TARGET="$(RANLIB_FOR_TARGET)" \
RANLIB_TEST_FOR_TARGET="$(RANLIB_TEST_FOR_TARGET)" \
INCLUDES="$(INCLUDES)" MAYBE_USE_COLLECT2="$(MAYBE_USE_COLLECT2)" \
CONFIG_H="$(CONFIG_H)" MACHMODE_H="$(MACHMODE_H)" \
LIB1ASMSRC='$(LIB1ASMSRC)' \
+ MAKEOVERRIDES= \
-f libgcc.mk all
- touch stmp-multilib
+ $(STAMP) stmp-multilib
# Compile two additional files that are linked with every program
# linked using GCC on systems using COFF or ELF, for the sake of C++
# constructors.
-$(T)crtbegin.o: crtstuff.c $(GCC_PASSES) $(CONFIG_H) \
- defaults.h frame.h gbl-ctors.h stmp-int-hdrs tsystem.h
+$(T)crtbegin.o: crtstuff.c $(GCC_PASSES) $(TCONFIG_H) auto-host.h \
+ gbl-ctors.h stmp-int-hdrs tsystem.h
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -g0 \
-finhibit-size-directive -fno-inline-functions \
-fno-exceptions $(CRTSTUFF_T_CFLAGS) @inhibit_libc@ \
-c $(srcdir)/crtstuff.c -DCRT_BEGIN -o $(T)crtbegin$(objext)
-$(T)crtend.o: crtstuff.c $(GCC_PASSES) $(CONFIG_H) \
- defaults.h frame.h gbl-ctors.h stmp-int-hdrs tsystem.h
+$(T)crtend.o: crtstuff.c $(GCC_PASSES) $(TCONFIG_H) auto-host.h \
+ gbl-ctors.h stmp-int-hdrs tsystem.h
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -g0 \
-finhibit-size-directive -fno-inline-functions \
-fno-exceptions $(CRTSTUFF_T_CFLAGS) @inhibit_libc@ \
-c $(srcdir)/crtstuff.c -DCRT_END -o $(T)crtend$(objext)
# These are versions of crtbegin and crtend for shared libraries.
-$(T)crtbeginS.o: crtstuff.c $(GCC_PASSES) $(CONFIG_H) \
- defaults.h frame.h gbl-ctors.h stmp-int-hdrs tsystem.h
+$(T)crtbeginS.o: crtstuff.c $(GCC_PASSES) $(TCONFIG_H) auto-host.h \
+ gbl-ctors.h stmp-int-hdrs tsystem.h
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -g0 \
-finhibit-size-directive -fno-inline-functions \
-fno-exceptions $(CRTSTUFF_T_CFLAGS_S) @inhibit_libc@ \
-c $(srcdir)/crtstuff.c -DCRT_BEGIN -DCRTSTUFFS_O \
-o $(T)crtbeginS$(objext)
-$(T)crtendS.o: crtstuff.c $(GCC_PASSES) $(CONFIG_H) \
- defaults.h frame.h gbl-ctors.h stmp-int-hdrs tsystem.h
+$(T)crtendS.o: crtstuff.c $(GCC_PASSES) $(TCONFIG_H) auto-host.h \
+ gbl-ctors.h stmp-int-hdrs tsystem.h
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -g0 \
-finhibit-size-directive -fno-inline-functions \
-fno-exceptions $(CRTSTUFF_T_CFLAGS_S) @inhibit_libc@ \
-o crt0.o -c $(CRT0_S)
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(CRT0STUFF_T_CFLAGS) \
-o mcrt0.o -c $(MCRT0_S)
- touch s-crt0
+ $(STAMP) s-crt0
#\f
# Compiling object files from source files.
# C language specific files.
-c-errors.o: c-errors.c $(CONFIG_H) system.h $(TREE_H) $(C_TREE_H) flags.h \
- diagnostic.h
+c-errors.o: c-errors.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(C_TREE_H) flags.h \
+ diagnostic.h $(TM_P_H)
c-parse.o : $(srcdir)/c-parse.c $(CONFIG_H) $(TREE_H) c-lex.h $(GGC_H) intl.h \
- $(C_TREE_H) input.h flags.h system.h toplev.h output.h cpplib.h
+ $(C_TREE_H) input.h flags.h $(SYSTEM_H) toplev.h output.h cpplib.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c $(srcdir)/c-parse.c
$(srcdir)/c-parse.c: $(srcdir)/c-parse.y
$(srcdir)/c-parse.in >>tmp-c-parse.y
$(SHELL) $(srcdir)/move-if-change tmp-c-parse.y $(srcdir)/c-parse.y
-c-decl.o : c-decl.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) $(C_TREE_H) \
+c-decl.o : c-decl.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(RTL_H) $(C_TREE_H) \
$(GGC_H) c-lex.h flags.h function.h output.h $(EXPR_H) \
- toplev.h defaults.h intl.h
-c-typeck.o : c-typeck.c $(CONFIG_H) system.h $(TREE_H) $(C_TREE_H) \
- flags.h intl.h output.h $(EXPR_H) $(RTL_H) toplev.h
-c-lang.o : c-lang.c $(CONFIG_H) system.h $(TREE_H) $(C_TREE_H) \
+ toplev.h intl.h $(TM_P_H)
+c-typeck.o : c-typeck.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(C_TREE_H) \
+ flags.h intl.h output.h $(EXPR_H) $(RTL_H) toplev.h $(TM_P_H)
+c-lang.o : c-lang.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(C_TREE_H) \
$(GGC_H) c-lex.h toplev.h diagnostic.h output.h function.h \
$(RTL_H) $(EXPR_H)
-c-lex.o : c-lex.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) c-lex.h $(C_TREE_H) \
+c-lex.o : c-lex.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(RTL_H) c-lex.h $(C_TREE_H) \
c-pragma.h input.h intl.h flags.h toplev.h output.h \
- mbchar.h cpplib.h $(EXPR_H)
-c-aux-info.o : c-aux-info.c $(CONFIG_H) system.h $(TREE_H) $(C_TREE_H) \
+ mbchar.h cpplib.h $(EXPR_H) $(TM_P_H)
+c-aux-info.o : c-aux-info.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(C_TREE_H) \
flags.h toplev.h
-c-convert.o : c-convert.c $(CONFIG_H) system.h $(TREE_H) flags.h toplev.h
-c-pragma.o: c-pragma.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) function.h \
- defaults.h c-pragma.h toplev.h $(GGC_H)
-mbchar.o: mbchar.c $(CONFIG_H) system.h mbchar.h
-graph.o: graph.c $(CONFIG_H) system.h toplev.h flags.h output.h $(RTL_H) \
+c-convert.o : c-convert.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) flags.h toplev.h
+c-pragma.o: c-pragma.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) function.h \
+ c-pragma.h toplev.h $(GGC_H) $(TM_P_H)
+mbchar.o: mbchar.c $(CONFIG_H) $(SYSTEM_H) mbchar.h
+graph.o: graph.c $(CONFIG_H) $(SYSTEM_H) toplev.h flags.h output.h $(RTL_H) \
function.h hard-reg-set.h $(BASIC_BLOCK_H) graph.h
-sbitmap.o: sbitmap.c $(CONFIG_H) system.h $(RTL_H) flags.h hard-reg-set.h \
+sbitmap.o: sbitmap.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) flags.h hard-reg-set.h \
$(BASIC_BLOCK_H)
COLLECT2_OBJS = collect2.o tlink.o hash.o intl.o underscore.o version.o
+COLLECT2_LIBS = @COLLECT2_LIBS@
collect2$(exeext): $(COLLECT2_OBJS) $(LIBDEPS)
# Don't try modifying collect2 (aka ld) in place--it might be linking this.
- -rm -f collect2$(exeext)
- $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(COLLECT2_OBJS) $(LIBS)
+ $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@T \
+ $(COLLECT2_OBJS) $(LIBS) $(COLLECT2_LIBS)
+ mv -f $@T $@
-collect2.o : collect2.c $(CONFIG_H) system.h gstab.h intl.h \
+collect2.o : collect2.c $(CONFIG_H) $(SYSTEM_H) gstab.h intl.h \
$(OBSTACK_H) $(DEMANGLE_H) collect2.h version.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
-DTARGET_MACHINE=\"$(target_alias)\" $(MAYBE_USE_COLLECT2) \
-c $(srcdir)/collect2.c
-tlink.o: tlink.c $(DEMANGLE_H) hash.h $(CONFIG_H) system.h collect2.h intl.h
-hash.o: hash.c hash.h system.h toplev.h
+tlink.o: tlink.c $(DEMANGLE_H) hash.h $(CONFIG_H) $(SYSTEM_H) collect2.h intl.h
+hash.o: hash.c hash.h $(SYSTEM_H) toplev.h $(GCONFIG_H)
$(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION)
-vfprintf.o: $(srcdir)/../libiberty/vfprintf.c $(GCONFIG_H) system.h
+vfprintf.o: $(srcdir)/../libiberty/vfprintf.c $(GCONFIG_H) $(SYSTEM_H)
rm -f vfprintf.c
$(LN_S) $(srcdir)/../libiberty/vfprintf.c vfprintf.c
$(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) \
vfprintf.c $(OUTPUT_OPTION)
-splay-tree.o: $(srcdir)/../libiberty/splay-tree.c \
+doprint.o: $(srcdir)/doprint.c $(GCONFIG_H) $(SYSTEM_H)
+ $(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) \
+ $(srcdir)/doprint.c $(OUTPUT_OPTION)
+
+strstr.o: $(srcdir)/../libiberty/strstr.c $(GCONFIG_H) $(SYSTEM_H)
+ rm -f strstr.c
+ $(LN_S) $(srcdir)/../libiberty/strstr.c strstr.c
+ $(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) \
+ strstr.c $(OUTPUT_OPTION)
+
+splay-tree.o: $(srcdir)/../libiberty/splay-tree.c $(GCONFIG_H) \
$(srcdir)/../include/splay-tree.h $(srcdir)/../include/libiberty.h
rm -f splay-tree.c
$(LN_S) $(srcdir)/../libiberty/splay-tree.c splay-tree.c
fi
$(SHELL) $(srcdir)/move-if-change tmp-under.c underscore.c
-rm -f tmp-dum.c tmp-dum.s
- touch s-under
+ $(STAMP) s-under
# A file used by all variants of C.
-c-common.o : c-common.c $(CONFIG_H) system.h $(TREE_H) $(OBSTACK_H) \
+c-common.o : c-common.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(OBSTACK_H) \
$(C_COMMON_H) flags.h toplev.h output.h c-pragma.h $(RTL_H) $(GGC_H) \
- $(EXPR_H) diagnostic.h
+ $(EXPR_H) $(TM_P_H) builtin-types.def
-c-semantics.o : c-semantics.c $(CONFIG_H) system.h $(TREE_H) $(C_TREE_H) \
+c-format.o : c-format.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) \
+ $(C_COMMON_H) flags.h toplev.h intl.h diagnostic.h
+
+c-semantics.o : c-semantics.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(C_TREE_H) \
c-lex.h flags.h toplev.h output.h c-pragma.h $(RTL_H) $(GGC_H) \
$(EXPR_H)
-c-dump.o: c-dump.c $(CONFIG_H) system.h $(TREE_H) $(C_TREE_H) \
+c-dump.o: c-dump.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(C_TREE_H) \
c-lex.h flags.h toplev.h output.h c-pragma.h $(RTL_H) $(GGC_H) \
$(EXPR_H) $(SPLAY_TREE_H) c-dump.h
-DDEFAULT_TARGET_VERSION=\"$(version)\" \
-DDEFAULT_TARGET_MACHINE=\"$(target_alias)\" \
-DSTANDARD_BINDIR_PREFIX=\"$(bindir)/\" \
- -DTOOLDIR_BASE_PREFIX=\"$(unlibsubdir)/../\"
-gcc.o: gcc.c $(CONFIG_H) system.h intl.h multilib.h \
+ -DTOOLDIR_BASE_PREFIX=\"$(unlibsubdir)/../\" \
+ `test "X$${SHLIB_LINK}" = "X" || test "@enable_shared@" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` \
+ `test "X$${SHLIB_MULTILIB}" = "X" || echo "-DNO_SHARED_LIBGCC_MULTILIB"`
+
+gcc.o: gcc.c $(CONFIG_H) $(SYSTEM_H) intl.h multilib.h \
Makefile $(lang_specs_files) prefix.h $(GCC_H)
+ (SHLIB_LINK='$(SHLIB_LINK)' \
+ SHLIB_MULTILIB='$(SHLIB_MULTILIB)'; \
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
$(DRIVER_DEFINES) \
- -c $(srcdir)/gcc.c
+ -c $(srcdir)/gcc.c)
-gccspec.o: gccspec.c $(CONFIG_H) system.h $(GCC_H)
-cppspec.o: cppspec.c $(CONFIG_H) system.h $(GCC_H)
+gccspec.o: gccspec.c $(CONFIG_H) $(SYSTEM_H) $(GCC_H)
+cppspec.o: cppspec.c $(CONFIG_H) $(SYSTEM_H) $(GCC_H)
tree-check.h: s-check ; @true
s-check : gencheck$(build_exeext) $(srcdir)/move-if-change
./gencheck$(build_exeext) > tmp-check.h
$(SHELL) $(srcdir)/move-if-change tmp-check.h tree-check.h
- touch s-check
+ $(STAMP) s-check
gencheck$(build_exeext) : gencheck.o $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
gencheck.o $(HOST_LIBS)
-gencheck.o : gencheck.c gencheck.h tree.def $(CONFIG_H) hconfig.h system.h \
- $(lang_tree_files)
+gencheck.o : gencheck.c gencheck.h tree.def $(HCONFIG_H) $(SYSTEM_H) \
+ $(lang_tree_files)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \
$(srcdir)/gencheck.c
version.o: version.c version.h
-ggc-common.o: ggc-common.c $(CONFIG_H) $(RTL_H) $(TREE_H) \
- flags.h $(GGC_H) varray.h hash.h
+ggc-common.o: ggc-common.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) \
+ flags.h $(GGC_H) varray.h hash.h $(TM_P_H)
-ggc-simple.o: ggc-simple.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h \
- $(GGC_H) varray.h $(TIMEVAR_H)
+ggc-simple.o: ggc-simple.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h \
+ $(GGC_H) varray.h $(TIMEVAR_H) $(TM_P_H)
-ggc-page.o: ggc-page.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h toplev.h \
- $(GGC_H) varray.h $(TIMEVAR_H)
+ggc-page.o: ggc-page.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h \
+ toplev.h $(GGC_H) varray.h $(TIMEVAR_H) $(TM_P_H)
-stringpool.o: stringpool.c $(CONFIG_H) system.h $(TREE_H) $(OBSTACK_H) \
+stringpool.o: stringpool.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(OBSTACK_H) \
flags.h toplev.h
-ggc-none.o: ggc-none.c $(GCONFIG_H) $(RTL_H) $(GGC_H)
+hashtable.o: hashtable.c hashtable.h $(CONFIG_H) $(SYSTEM_H) $(OBSTACK_H)
+
+ggc-none.o: ggc-none.c $(GCONFIG_H) $(SYSTEM_H) $(GGC_H)
$(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION)
obstack.o: $(srcdir)/../libiberty/obstack.c $(GCONFIG_H)
$(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) \
obstack.c $(OUTPUT_OPTION)
-prefix.o: prefix.c $(CONFIG_H) system.h Makefile prefix.h
+prefix.o: prefix.c $(CONFIG_H) $(SYSTEM_H) Makefile prefix.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
-DPREFIX=\"$(prefix)\" \
-c $(srcdir)/prefix.c
-convert.o: convert.c $(CONFIG_H) system.h $(TREE_H) flags.h convert.h toplev.h
-
-tree.o : tree.c $(CONFIG_H) system.h $(TREE_H) flags.h function.h toplev.h \
- $(GGC_H) $(HASHTAB_H) output.h defaults.h
-print-tree.o : print-tree.c $(CONFIG_H) system.h $(TREE_H) $(GGC_H)
-stor-layout.o : stor-layout.c $(CONFIG_H) system.h $(TREE_H) flags.h \
- function.h $(EXPR_H) $(RTL_H) toplev.h $(GGC_H)
-fold-const.o : fold-const.c $(CONFIG_H) system.h $(TREE_H) flags.h toplev.h \
- $(EXPR_H) $(RTL_H) $(GGC_H)
-diagnostic.o : diagnostic.c diagnostic.h \
- $(CONFIG_H) system.h $(TREE_H) $(RTL_H) tm_p.h flags.h \
- $(GGC_H) input.h $(INSN_ATTR_H) insn-codes.h insn-config.h toplev.h intl.h
-toplev.o : toplev.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) function.h \
- flags.h input.h $(INSN_ATTR_H) xcoffout.h defaults.h output.h diagnostic.h \
- insn-codes.h insn-config.h intl.h $(RECOG_H) Makefile toplev.h dwarfout.h \
+convert.o: convert.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) flags.h convert.h toplev.h
+
+tree.o : tree.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) flags.h function.h toplev.h \
+ $(GGC_H) $(HASHTAB_H) output.h $(TM_P_H)
+print-tree.o : print-tree.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(GGC_H)
+stor-layout.o : stor-layout.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) flags.h \
+ function.h $(EXPR_H) $(RTL_H) toplev.h $(GGC_H) $(TM_P_H)
+fold-const.o : fold-const.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) flags.h toplev.h \
+ $(EXPR_H) $(RTL_H) $(GGC_H) $(TM_P_H)
+diagnostic.o : diagnostic.c diagnostic.h diagnostic.def \
+ $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(RTL_H) $(TM_P_H) flags.h \
+ $(GGC_H) input.h $(INSN_ATTR_H) insn-config.h toplev.h intl.h
+toplev.o : toplev.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(RTL_H) function.h \
+ flags.h input.h $(INSN_ATTR_H) xcoffout.h output.h diagnostic.h \
+ insn-config.h intl.h $(RECOG_H) Makefile toplev.h dwarfout.h \
dwarf2out.h sdbout.h dbxout.h $(EXPR_H) hard-reg-set.h $(BASIC_BLOCK_H) \
- graph.h $(LOOP_H) except.h $(REGS_H) $(TIMEVAR_H) $(lang_options_files) ssa.h
+ graph.h $(LOOP_H) except.h $(REGS_H) $(TIMEVAR_H) $(lang_options_files) \
+ ssa.h params.h $(TM_P_H) reload.h dwarf2asm.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(MAYBE_USE_COLLECT2) \
-DTARGET_NAME=\"$(target_alias)\" \
-c $(srcdir)/toplev.c
+main.o : main.c toplev.h
-rtl.o : rtl.c $(GCONFIG_H) system.h $(RTL_H) bitmap.h $(GGC_H) toplev.h
+rtl.o : rtl.c $(GCONFIG_H) $(SYSTEM_H) $(RTL_H) bitmap.h $(GGC_H) toplev.h
$(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION)
-print-rtl.o : print-rtl.c $(GCONFIG_H) system.h $(RTL_H) hard-reg-set.h \
+print-rtl.o : print-rtl.c $(GCONFIG_H) $(SYSTEM_H) $(RTL_H) hard-reg-set.h \
$(BASIC_BLOCK_H)
$(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION)
-rtlanal.o : rtlanal.c $(CONFIG_H) system.h toplev.h $(RTL_H)
-errors.o : errors.c $(GCONFIG_H) system.h errors.h
+rtlanal.o : rtlanal.c $(CONFIG_H) $(SYSTEM_H) toplev.h $(RTL_H) hard-reg-set.h
+errors.o : errors.c $(GCONFIG_H) $(SYSTEM_H) errors.h
$(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION)
-varasm.o : varasm.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) flags.h \
- function.h defaults.h $(EXPR_H) hard-reg-set.h $(REGS_H) \
- xcoffout.h output.h c-pragma.h toplev.h dbxout.h sdbout.h $(GGC_H)
-function.o : function.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
- function.h insn-flags.h insn-codes.h $(EXPR_H) $(REGS_H) hard-reg-set.h \
- insn-config.h $(RECOG_H) output.h toplev.h except.h hash.h $(GGC_H)
-stmt.o : stmt.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h function.h \
- insn-flags.h insn-config.h insn-codes.h hard-reg-set.h $(EXPR_H) except.h \
- $(LOOP_H) $(RECOG_H) toplev.h output.h varray.h $(GGC_H)
-except.o : except.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
- function.h insn-flags.h $(EXPR_H) $(REGS_H) hard-reg-set.h \
- insn-config.h $(RECOG_H) output.h except.h toplev.h intl.h $(GGC_H)
-expr.o : expr.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h function.h \
- $(REGS_H) insn-flags.h insn-codes.h $(EXPR_H) insn-config.h $(RECOG_H) \
+varasm.o : varasm.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(RTL_H) flags.h \
+ function.h $(EXPR_H) hard-reg-set.h $(REGS_H) \
+ xcoffout.h output.h c-pragma.h toplev.h dbxout.h sdbout.h $(GGC_H) $(TM_P_H)
+function.o : function.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h \
+ function.h $(EXPR_H) $(REGS_H) hard-reg-set.h \
+ insn-config.h $(RECOG_H) output.h toplev.h except.h hash.h $(GGC_H) $(TM_P_H)
+stmt.o : stmt.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h function.h \
+ insn-config.h hard-reg-set.h $(EXPR_H) except.h \
+ $(LOOP_H) $(RECOG_H) toplev.h output.h varray.h $(GGC_H) $(TM_P_H)
+except.o : except.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h \
+ except.h function.h $(EXPR_H) integrate.h \
+ insn-config.h hard-reg-set.h $(BASIC_BLOCK_H) output.h \
+ dwarf2asm.h dwarf2out.h toplev.h $(HASHTAB_H) intl.h $(GGC_H)
+expr.o : expr.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h function.h \
+ $(REGS_H) $(EXPR_H) insn-config.h $(RECOG_H) \
output.h typeclass.h hard-reg-set.h toplev.h hard-reg-set.h except.h \
- reload.h $(GGC_H) intl.h
-builtins.o : builtins.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
- function.h $(REGS_H) insn-flags.h insn-codes.h $(EXPR_H) insn-config.h \
+ reload.h $(GGC_H) intl.h $(TM_P_H)
+builtins.o : builtins.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h \
+ function.h $(REGS_H) $(EXPR_H) insn-config.h \
$(RECOG_H) output.h typeclass.h hard-reg-set.h toplev.h hard-reg-set.h \
- except.h
-calls.o : calls.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h $(EXPR_H) \
- insn-flags.h $(REGS_H) toplev.h output.h function.h $(TIMEVAR_H)
-expmed.o : expmed.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
- insn-flags.h insn-config.h insn-codes.h $(EXPR_H) $(RECOG_H) real.h toplev.h
-explow.o : explow.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
- hard-reg-set.h insn-config.h $(EXPR_H) $(RECOG_H) insn-flags.h \
- insn-codes.h toplev.h function.h
-optabs.o : optabs.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
- insn-flags.h insn-config.h insn-codes.h $(EXPR_H) $(RECOG_H) reload.h \
- toplev.h $(GGC_H) real.h defaults.h
-dbxout.o : dbxout.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) flags.h $(REGS_H) \
- insn-config.h reload.h gstab.h xcoffout.h defaults.h output.h dbxout.h \
- toplev.h
-sdbout.o : sdbout.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) flags.h except.h \
- function.h $(EXPR_H) output.h hard-reg-set.h $(REGS_H) defaults.h real.h \
- insn-config.h $(OBSTACK_H) xcoffout.h c-pragma.h \
- sdbout.h toplev.h
-dwarfout.o : dwarfout.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) dwarf.h \
- flags.h insn-config.h reload.h output.h defaults.h toplev.h dwarfout.h
-dwarf2out.o : dwarf2out.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) dwarf2.h \
- flags.h insn-config.h reload.h output.h defaults.h \
+ except.h $(TM_P_H)
+calls.o : calls.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h $(EXPR_H) \
+ $(REGS_H) toplev.h output.h function.h $(TIMEVAR_H) $(TM_P_H)
+expmed.o : expmed.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h \
+ insn-config.h $(EXPR_H) $(RECOG_H) real.h \
+ toplev.h $(TM_P_H)
+explow.o : explow.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h \
+ hard-reg-set.h insn-config.h $(EXPR_H) $(RECOG_H) \
+ toplev.h function.h $(TM_P_H)
+optabs.o : optabs.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h \
+ insn-config.h $(EXPR_H) $(RECOG_H) reload.h \
+ toplev.h $(GGC_H) real.h $(TM_P_H) except.h
+dbxout.o : dbxout.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(RTL_H) flags.h $(REGS_H) \
+ insn-config.h reload.h gstab.h xcoffout.h output.h dbxout.h toplev.h \
+ $(TM_P_H)
+sdbout.o : sdbout.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(RTL_H) flags.h except.h \
+ function.h $(EXPR_H) output.h hard-reg-set.h $(REGS_H) real.h \
+ insn-config.h $(OBSTACK_H) xcoffout.h c-pragma.h ggc.h \
+ sdbout.h toplev.h $(TM_P_H)
+dwarfout.o : dwarfout.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(RTL_H) dwarf.h \
+ flags.h insn-config.h reload.h output.h toplev.h dwarfout.h $(TM_P_H)
+dwarf2out.o : dwarf2out.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(RTL_H) dwarf2.h \
+ flags.h insn-config.h reload.h output.h \
hard-reg-set.h $(REGS_H) $(EXPR_H) toplev.h dwarf2out.h varray.h \
- $(GGC_H) except.h
-xcoffout.o : xcoffout.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) xcoffout.h \
+ $(GGC_H) except.h dwarf2asm.h $(TM_P_H)
+dwarf2asm.o : dwarf2asm.c $(CONFIG_H) $(SYSTEM_H) flags.h $(RTL_H) $(TREE_H) \
+ output.h dwarf2asm.h $(TM_P_H)
+xcoffout.o : xcoffout.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) $(RTL_H) xcoffout.h \
flags.h toplev.h output.h dbxout.h $(GGC_H)
-emit-rtl.o : emit-rtl.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
+emit-rtl.o : emit-rtl.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h \
function.h $(REGS_H) insn-config.h $(RECOG_H) real.h $(GGC_H) \
$(EXPR_H) $(srcdir)/../include/obstack.h hard-reg-set.h bitmap.h toplev.h \
- $(HASHTAB_H) defaults.h
-real.o : real.c $(CONFIG_H) system.h $(TREE_H) toplev.h
-integrate.o : integrate.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
- $(INTEGRATE_H) insn-flags.h insn-config.h $(EXPR_H) real.h $(REGS_H) \
- intl.h function.h output.h $(RECOG_H) except.h toplev.h $(LOOP_H)
-jump.o : jump.c $(CONFIG_H) system.h $(RTL_H) flags.h hard-reg-set.h $(REGS_H) \
- insn-config.h insn-flags.h $(RECOG_H) $(EXPR_H) real.h except.h function.h \
- toplev.h $(INSN_ATTR_H)
-
-simplify-rtx.o : simplify-rtx.c $(CONFIG_H) system.h $(RTL_H) $(REGS_H) \
+ $(HASHTAB_H) $(TM_P_H)
+real.o : real.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) toplev.h $(TM_P_H)
+integrate.o : integrate.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h \
+ $(INTEGRATE_H) insn-config.h $(EXPR_H) real.h $(REGS_H) \
+ intl.h function.h output.h $(RECOG_H) except.h toplev.h $(LOOP_H) \
+ params.h $(TM_P_H)
+jump.o : jump.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) flags.h hard-reg-set.h $(REGS_H) \
+ insn-config.h $(RECOG_H) $(EXPR_H) real.h except.h function.h \
+ toplev.h $(INSN_ATTR_H) $(TM_P_H) reload.h
+
+simplify-rtx.o : simplify-rtx.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(REGS_H) \
+ hard-reg-set.h flags.h real.h insn-config.h $(RECOG_H) $(EXPR_H) toplev.h \
+ output.h function.h $(GGC_H) $(OBSTACK_H) $(TM_P_H)
+cselib.o : cselib.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(REGS_H) \
hard-reg-set.h flags.h real.h insn-config.h $(RECOG_H) $(EXPR_H) toplev.h \
- output.h function.h cselib.h $(GGC_H) $(OBSTACK_H)
-cse.o : cse.c $(CONFIG_H) system.h $(RTL_H) $(REGS_H) hard-reg-set.h flags.h \
+ output.h function.h cselib.h $(GGC_H) $(OBSTACK_H) $(TM_P_H)
+cse.o : cse.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(REGS_H) hard-reg-set.h flags.h \
real.h insn-config.h $(RECOG_H) $(EXPR_H) toplev.h output.h function.h \
- $(BASIC_BLOCK_H) $(GGC_H)
-gcse.o : gcse.c $(CONFIG_H) system.h $(RTL_H) $(REGS_H) hard-reg-set.h \
- flags.h real.h insn-config.h $(RECOG_H) $(EXPR_H) $(BASIC_BLOCK_H) \
- function.h output.h toplev.h
-sibcall.o : sibcall.c $(CONFIG_H) system.h $(RTL_H) $(REGS_H) function.h \
+ $(BASIC_BLOCK_H) $(GGC_H) $(TM_P_H)
+gcse.o : gcse.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(REGS_H) hard-reg-set.h \
+ flags.h real.h insn-config.h ggc.h $(RECOG_H) $(EXPR_H) $(BASIC_BLOCK_H) \
+ function.h output.h toplev.h $(TM_P_H) params.h
+sibcall.o : sibcall.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(REGS_H) function.h \
hard-reg-set.h flags.h insn-config.h $(RECOG_H) $(BASIC_BLOCK_H)
-resource.o : resource.c $(CONFIG_H) $(RTL_H) hard-reg-set.h system.h \
+resource.o : resource.c $(CONFIG_H) $(RTL_H) hard-reg-set.h $(SYSTEM_H) \
$(BASIC_BLOCK_H) $(REGS_H) flags.h output.h resource.h function.h toplev.h \
- $(INSN_ATTR_H) except.h
-lcm.o : lcm.c $(CONFIG_H) system.h $(RTL_H) $(REGS_H) hard-reg-set.h flags.h \
- real.h insn-config.h $(INSN_ATTR_H) $(RECOG_H) $(EXPR_H) $(BASIC_BLOCK_H)
-ssa.o : ssa.c $(CONFIG_H) system.h $(REGS_H) varray.h \
+ $(INSN_ATTR_H) except.h params.h $(TM_P_H)
+lcm.o : lcm.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(REGS_H) hard-reg-set.h flags.h \
+ real.h insn-config.h $(INSN_ATTR_H) $(RECOG_H) $(EXPR_H) $(BASIC_BLOCK_H) \
+ $(TM_P_H)
+ssa.o : ssa.c $(CONFIG_H) $(SYSTEM_H) $(REGS_H) varray.h $(EXPR_H) \
hard-reg-set.h flags.h function.h real.h insn-config.h $(RECOG_H) \
$(BASIC_BLOCK_H) output.h ssa.h
-dce.o : dce.c $(CONFIG_H) system.h $(RTL_H) hard-reg-set.h $(BASIC_BLOCK_H) \
+dce.o : dce.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) hard-reg-set.h $(BASIC_BLOCK_H) \
ssa.h insn-config.h $(RECOG_H) output.h
-conflict.o : conflict.c $(CONFIG_H) system.h $(OBSTACK_H) $(HASHTAB_H) \
+conflict.o : conflict.c $(CONFIG_H) $(SYSTEM_H) $(OBSTACK_H) $(HASHTAB_H) \
$(RTL_H) hard-reg-set.h $(BASIC_BLOCK_H)
-profile.o : profile.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
- insn-flags.h insn-config.h output.h $(REGS_H) $(EXPR_H) function.h \
- gcov-io.h toplev.h $(GGC_H) hard-reg-set.h $(BASIC_BLOCK_H) defaults.h
-loop.o : loop.c $(CONFIG_H) system.h $(RTL_H) flags.h $(LOOP_H) insn-config.h \
- insn-flags.h $(REGS_H) hard-reg-set.h $(RECOG_H) $(EXPR_H) real.h \
- $(BASIC_BLOCK_H) function.h toplev.h varray.h except.h cselib.h
-doloop.o : doloop.c $(CONFIG_H) system.h $(RTL_H) flags.h $(LOOP_H) \
- insn-flags.h $(EXPR_H) hard-reg-set.h $(BASIC_BLOCK_H)
-unroll.o : unroll.c $(CONFIG_H) system.h $(RTL_H) insn-config.h function.h \
+profile.o : profile.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h \
+ insn-config.h output.h $(REGS_H) $(EXPR_H) function.h \
+ gcov-io.h toplev.h $(GGC_H) hard-reg-set.h $(BASIC_BLOCK_H)
+loop.o : loop.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) flags.h $(LOOP_H) insn-config.h \
+ $(REGS_H) hard-reg-set.h $(RECOG_H) $(EXPR_H) real.h \
+ $(BASIC_BLOCK_H) function.h toplev.h varray.h except.h cselib.h $(TM_P_H)
+doloop.o : doloop.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) flags.h $(LOOP_H) \
+ $(EXPR_H) hard-reg-set.h $(BASIC_BLOCK_H) $(TM_P_H) toplev.h
+unroll.o : unroll.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) insn-config.h function.h \
$(INTEGRATE_H) $(REGS_H) $(RECOG_H) flags.h $(EXPR_H) $(LOOP_H) toplev.h \
- hard-reg-set.h varray.h $(BASIC_BLOCK_H)
-flow.o : flow.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h insn-config.h \
+ hard-reg-set.h varray.h $(BASIC_BLOCK_H) $(TM_P_H)
+flow.o : flow.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h insn-config.h \
$(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h toplev.h $(RECOG_H) \
- insn-flags.h function.h except.h $(EXPR_H) ssa.h $(GGC_H)
-dominance.o : dominance.c $(CONFIG_H) system.h $(RTL_H) hard-reg-set.h \
+ function.h except.h $(EXPR_H) ssa.h $(GGC_H) $(TM_P_H)
+dominance.o : dominance.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) hard-reg-set.h \
$(BASIC_BLOCK_H)
-combine.o : combine.c $(CONFIG_H) system.h $(RTL_H) flags.h function.h \
- insn-config.h insn-flags.h insn-codes.h $(INSN_ATTR_H) $(REGS_H) $(EXPR_H) \
- $(BASIC_BLOCK_H) $(RECOG_H) real.h hard-reg-set.h toplev.h
-regclass.o : regclass.c $(CONFIG_H) system.h $(RTL_H) hard-reg-set.h flags.h \
+combine.o : combine.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) flags.h function.h \
+ insn-config.h $(INSN_ATTR_H) $(REGS_H) $(EXPR_H) \
+ $(BASIC_BLOCK_H) $(RECOG_H) real.h hard-reg-set.h toplev.h $(TM_P_H)
+regclass.o : regclass.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) hard-reg-set.h flags.h \
$(BASIC_BLOCK_H) $(REGS_H) insn-config.h $(RECOG_H) reload.h real.h \
- toplev.h function.h output.h $(GGC_H)
-local-alloc.o : local-alloc.c $(CONFIG_H) system.h $(RTL_H) flags.h \
+ toplev.h function.h output.h $(GGC_H) $(TM_P_H) $(EXPR_H)
+local-alloc.o : local-alloc.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) flags.h \
$(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h insn-config.h $(RECOG_H) \
- output.h function.h $(INSN_ATTR_H) toplev.h
-bitmap.o : bitmap.c $(GCONFIG_H) system.h $(RTL_H) flags.h $(BASIC_BLOCK_H) \
+ output.h function.h $(INSN_ATTR_H) toplev.h $(TM_P_H)
+bitmap.o : bitmap.c $(GCONFIG_H) $(SYSTEM_H) $(RTL_H) flags.h $(BASIC_BLOCK_H) \
$(REGS_H)
$(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION)
-global.o : global.c $(CONFIG_H) system.h $(RTL_H) flags.h reload.h function.h \
- $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h insn-config.h output.h toplev.h
-varray.o : varray.c $(CONFIG_H) system.h varray.h $(RTL_H) $(TREE_H) bitmap.h
-reload.o : reload.c $(CONFIG_H) system.h $(RTL_H) flags.h output.h $(EXPR_H) \
- reload.h $(RECOG_H) hard-reg-set.h insn-config.h insn-codes.h $(REGS_H) \
- function.h real.h toplev.h
-reload1.o : reload1.c $(CONFIG_H) system.h $(RTL_H) real.h flags.h $(EXPR_H) \
- reload.h $(REGS_H) hard-reg-set.h insn-config.h insn-flags.h insn-codes.h \
- $(BASIC_BLOCK_H) $(RECOG_H) output.h function.h toplev.h cselib.h
-caller-save.o : caller-save.c $(CONFIG_H) system.h $(RTL_H) flags.h \
+global.o : global.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) flags.h reload.h function.h \
+ $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h insn-config.h output.h toplev.h \
+ $(TM_P_H)
+varray.o : varray.c $(CONFIG_H) $(SYSTEM_H) varray.h $(RTL_H) $(TREE_H) bitmap.h
+reload.o : reload.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) flags.h output.h $(EXPR_H) \
+ reload.h $(RECOG_H) hard-reg-set.h insn-config.h $(REGS_H) \
+ function.h real.h toplev.h $(TM_P_H)
+reload1.o : reload1.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) real.h flags.h $(EXPR_H) \
+ reload.h $(REGS_H) hard-reg-set.h insn-config.h \
+ $(BASIC_BLOCK_H) $(RECOG_H) output.h function.h toplev.h cselib.h $(TM_P_H)
+caller-save.o : caller-save.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) flags.h \
$(REGS_H) hard-reg-set.h insn-config.h $(BASIC_BLOCK_H) function.h \
- $(RECOG_H) reload.h $(EXPR_H) toplev.h
-reorg.o : reorg.c $(CONFIG_H) system.h $(RTL_H) conditions.h hard-reg-set.h \
- $(BASIC_BLOCK_H) $(REGS_H) insn-config.h $(INSN_ATTR_H) insn-flags.h \
- $(RECOG_H) function.h flags.h output.h $(EXPR_H) toplev.h
-alias.o : alias.c $(CONFIG_H) system.h $(RTL_H) flags.h hard-reg-set.h \
- $(BASIC_BLOCK_H) $(REGS_H) toplev.h output.h $(EXPR_H) insn-flags.h \
- $(GGC_H) function.h cselib.h $(TREE_H)
-regmove.o : regmove.c $(CONFIG_H) system.h $(RTL_H) insn-config.h \
+ $(RECOG_H) reload.h $(EXPR_H) toplev.h $(TM_P_H)
+reorg.o : reorg.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) conditions.h hard-reg-set.h \
+ $(BASIC_BLOCK_H) $(REGS_H) insn-config.h $(INSN_ATTR_H) \
+ $(RECOG_H) function.h flags.h output.h $(EXPR_H) toplev.h params.h $(TM_P_H)
+alias.o : alias.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) flags.h hard-reg-set.h \
+ $(BASIC_BLOCK_H) $(REGS_H) toplev.h output.h $(EXPR_H) \
+ $(GGC_H) function.h cselib.h $(TREE_H) $(TM_P_H)
+regmove.o : regmove.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) insn-config.h \
$(RECOG_H) output.h $(REGS_H) hard-reg-set.h flags.h function.h \
- $(EXPR_H) insn-flags.h $(BASIC_BLOCK_H) toplev.h
-haifa-sched.o : haifa-sched.c $(CONFIG_H) system.h $(RTL_H) sched-int.h \
+ $(EXPR_H) $(BASIC_BLOCK_H) toplev.h $(TM_P_H) except.h reload.h
+haifa-sched.o : haifa-sched.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) sched-int.h \
$(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h flags.h insn-config.h function.h \
- $(INSN_ATTR_H) insn-flags.h toplev.h $(RECOG_H) except.h
-sched-deps.o : haifa-sched.c $(CONFIG_H) system.h $(RTL_H) sched-int.h \
+ $(INSN_ATTR_H) toplev.h $(RECOG_H) except.h $(TM_P_H)
+sched-deps.o : sched-deps.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) sched-int.h \
$(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h flags.h insn-config.h function.h \
- $(INSN_ATTR_H) toplev.h $(RECOG_H) except.h
-sched-rgn.o : haifa-sched.c $(CONFIG_H) system.h $(RTL_H) sched-int.h \
+ $(INSN_ATTR_H) toplev.h $(RECOG_H) except.h $(TM_P_H)
+sched-rgn.o : sched-rgn.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) sched-int.h \
$(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h flags.h insn-config.h function.h \
- $(INSN_ATTR_H) toplev.h $(RECOG_H) except.h
-sched-ebb.o : sched-ebb.c $(CONFIG_H) system.h $(RTL_H) sched-int.h \
+ $(INSN_ATTR_H) toplev.h $(RECOG_H) except.h $(TM_P_H)
+sched-ebb.o : sched-ebb.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) sched-int.h \
$(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h flags.h insn-config.h function.h \
- $(INSN_ATTR_H) toplev.h $(RECOG_H) except.h
-sched-vis.o : sched-vis.c $(CONFIG_H) system.h $(RTL_H) sched-int.h \
- hard-reg-set.h $(BASIC_BLOCK_H) $(INSN_ATTR_H) $(REGS_H)
-final.o : final.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h intl.h \
+ $(INSN_ATTR_H) toplev.h $(RECOG_H) except.h $(TM_P_H)
+sched-vis.o : sched-vis.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) sched-int.h \
+ hard-reg-set.h $(BASIC_BLOCK_H) $(INSN_ATTR_H) $(REGS_H) $(TM_P_H)
+final.o : final.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h intl.h \
$(REGS_H) $(RECOG_H) conditions.h insn-config.h $(INSN_ATTR_H) function.h \
- real.h output.h hard-reg-set.h insn-flags.h insn-codes.h gstab.h except.h \
- xcoffout.h defaults.h toplev.h reload.h dwarfout.h dwarf2out.h sdbout.h \
- dbxout.h $(BASIC_BLOCK_H)
-recog.o : recog.c $(CONFIG_H) system.h $(RTL_H) function.h $(BASIC_BLOCK_H) \
+ real.h output.h hard-reg-set.h except.h \
+ xcoffout.h toplev.h reload.h dwarfout.h dwarf2out.h sdbout.h \
+ dbxout.h $(BASIC_BLOCK_H) $(TM_P_H)
+recog.o : recog.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) function.h $(BASIC_BLOCK_H) \
$(REGS_H) $(RECOG_H) hard-reg-set.h flags.h insn-config.h $(INSN_ATTR_H) \
- insn-flags.h insn-codes.h real.h toplev.h output.h reload.h
-reg-stack.o : reg-stack.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) $(RECOG_H) \
- $(REGS_H) hard-reg-set.h flags.h insn-config.h insn-flags.h toplev.h \
- varray.h function.h
-predict.o: predict.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
+ real.h toplev.h output.h reload.h $(TM_P_H)
+reg-stack.o : reg-stack.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) $(RECOG_H) \
+ $(REGS_H) hard-reg-set.h flags.h insn-config.h toplev.h reload.h \
+ varray.h function.h $(TM_P_H)
+predict.o: predict.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h \
insn-config.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h toplev.h \
- $(RECOG_H) insn-flags.h function.h except.h $(EXPR_H)
-lists.o: lists.c $(CONFIG_H) system.h toplev.h $(RTL_H) $(GGC_H)
-bb-reorder.o : bb-reorder.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
+ $(RECOG_H) function.h except.h $(EXPR_H) $(TM_P_H)
+lists.o: lists.c $(CONFIG_H) $(SYSTEM_H) toplev.h $(RTL_H) $(GGC_H)
+bb-reorder.o : bb-reorder.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) flags.h \
insn-config.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h toplev.h \
- $(RECOG_H) insn-flags.h function.h except.h $(EXPR_H)
-timevar.o : timevar.c $(CONFIG_H) system.h $(TIMEVAR_H) flags.h intl.h
-regrename.o : regrename.c $(CONFIG_H) system.h $(RTL_H) insn-config.h \
+ $(RECOG_H) function.h except.h $(EXPR_H) $(TM_P_H)
+timevar.o : timevar.c $(CONFIG_H) $(SYSTEM_H) $(TIMEVAR_H) flags.h intl.h
+regrename.o : regrename.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) insn-config.h \
$(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h $(RECOG_H) function.h \
- resource.h $(OBSTACK_H) flags.h
-ifcvt.o : ifcvt.c $(CONFIG_H) system.h $(RTL_H) $(REGS_H) \
+ resource.h $(OBSTACK_H) flags.h $(TM_P_H)
+ifcvt.o : ifcvt.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(REGS_H) toplev.h \
flags.h insn-config.h function.h $(RECOG_H) $(BASIC_BLOCK_H) $(EXPR_H) \
- output.h
-dependence.o : dependence.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) \
+ output.h $(TM_P_H)
+dependence.o : dependence.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TREE_H) \
$(C_COMMON_H) flags.h varray.h $(EXPR_H)
+params.o : params.c $(CONFIG_H) $(SYSTEM_H) params.h toplev.h
$(out_object_file): $(out_file) $(CONFIG_H) $(TREE_H) $(GGC_H) \
$(RTL_H) $(REGS_H) hard-reg-set.h real.h insn-config.h conditions.h \
- insn-flags.h output.h $(INSN_ATTR_H) insn-codes.h system.h toplev.h \
- function.h sched-int.h
+ output.h $(INSN_ATTR_H) $(SYSTEM_H) toplev.h \
+ function.h sched-int.h $(TM_P_H)
$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
$(out_file) $(OUTPUT_OPTION)
mips-tfile: mips-tfile.o version.o $(LIBDEPS)
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ mips-tfile.o version.o $(LIBS)
-mips-tfile.o : mips-tfile.c $(CONFIG_H) $(RTL_H) system.h version.h
+mips-tfile.o : mips-tfile.c $(CONFIG_H) $(RTL_H) $(SYSTEM_H) version.h
mips-tdump: mips-tdump.o version.o $(LIBDEPS)
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ mips-tdump.o version.o $(LIBS)
-mips-tdump.o : mips-tdump.c $(CONFIG_H) $(RTL_H) system.h
+mips-tdump.o : mips-tdump.c $(CONFIG_H) $(RTL_H) $(SYSTEM_H)
# Build file to support OSF/rose half-pic format.
-halfpic.o: halfpic.c $(CONFIG_H) $(RTL_H) $(TREE_H) system.h
-
-# Normally this target is not used; but it is used if you
-# define ALLOCA=alloca.o. In that case, you must get a suitable alloca.c
-# from the GNU Emacs distribution.
-alloca.o: $(srcdir)/../libiberty/alloca.c
- rm -f alloca.c
- $(LN_S) $(srcdir)/../libiberty/alloca.c alloca.c
- $(CC) $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) \
- $(ALLOCA_FLAGS) -c alloca.c
- $(ALLOCA_FINISH)
+halfpic.o: halfpic.c $(CONFIG_H) $(RTL_H) $(TREE_H) $(SYSTEM_H)
+
#\f
# Generate header and source files from the machine description,
# and compile them.
s-config : $(md_file) genconfig$(build_exeext) $(srcdir)/move-if-change
./genconfig$(build_exeext) $(md_file) > tmp-config.h
$(SHELL) $(srcdir)/move-if-change tmp-config.h insn-config.h
- touch s-config
+ $(STAMP) s-config
insn-flags.h: s-flags ; @true
s-flags : $(md_file) genflags$(build_exeext) $(srcdir)/move-if-change
./genflags$(build_exeext) $(md_file) > tmp-flags.h
$(SHELL) $(srcdir)/move-if-change tmp-flags.h insn-flags.h
- touch s-flags
+ $(STAMP) s-flags
insn-codes.h: s-codes ; @true
s-codes : $(md_file) gencodes$(build_exeext) $(srcdir)/move-if-change
./gencodes$(build_exeext) $(md_file) > tmp-codes.h
$(SHELL) $(srcdir)/move-if-change tmp-codes.h insn-codes.h
- touch s-codes
+ $(STAMP) s-codes
insn-emit.o : insn-emit.c $(CONFIG_H) $(RTL_H) $(EXPR_H) real.h output.h \
- insn-config.h insn-flags.h insn-codes.h system.h reload.h $(RECOG_H) \
- function.h flags.h hard-reg-set.h resource.h
+ insn-config.h $(SYSTEM_H) reload.h $(RECOG_H) toplev.h \
+ function.h flags.h hard-reg-set.h resource.h $(TM_P_H)
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-emit.c
insn-emit.c: s-emit ; @true
s-emit : $(md_file) genemit$(build_exeext) $(srcdir)/move-if-change
./genemit$(build_exeext) $(md_file) > tmp-emit.c
$(SHELL) $(srcdir)/move-if-change tmp-emit.c insn-emit.c
- touch s-emit
+ $(STAMP) s-emit
insn-recog.o : insn-recog.c $(CONFIG_H) $(RTL_H) insn-config.h $(RECOG_H) \
- real.h output.h flags.h system.h function.h hard-reg-set.h resource.h
+ real.h output.h flags.h $(SYSTEM_H) function.h hard-reg-set.h resource.h \
+ $(TM_P_H) toplev.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-recog.c
insn-recog.c: s-recog ; @true
s-recog : $(md_file) genrecog$(build_exeext) $(srcdir)/move-if-change
./genrecog$(build_exeext) $(md_file) > tmp-recog.c
$(SHELL) $(srcdir)/move-if-change tmp-recog.c insn-recog.c
- touch s-recog
+ $(STAMP) s-recog
-insn-opinit.o : insn-opinit.c $(CONFIG_H) $(RTL_H) insn-codes.h insn-flags.h \
- insn-config.h flags.h $(RECOG_H) $(EXPR_H) reload.h system.h
+insn-opinit.o : insn-opinit.c $(CONFIG_H) $(RTL_H) \
+ insn-config.h flags.h $(RECOG_H) $(EXPR_H) reload.h $(SYSTEM_H)
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-opinit.c
insn-opinit.c: s-opinit ; @true
s-opinit : $(md_file) genopinit$(build_exeext) $(srcdir)/move-if-change
./genopinit$(build_exeext) $(md_file) > tmp-opinit.c
$(SHELL) $(srcdir)/move-if-change tmp-opinit.c insn-opinit.c
- touch s-opinit
+ $(STAMP) s-opinit
-insn-extract.o : insn-extract.c $(CONFIG_H) $(RTL_H) system.h toplev.h \
+insn-extract.o : insn-extract.c $(CONFIG_H) $(RTL_H) $(SYSTEM_H) toplev.h \
insn-config.h $(RECOG_H)
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-extract.c
s-extract : $(md_file) genextract$(build_exeext) $(srcdir)/move-if-change
./genextract$(build_exeext) $(md_file) > tmp-extract.c
$(SHELL) $(srcdir)/move-if-change tmp-extract.c insn-extract.c
- touch s-extract
+ $(STAMP) s-extract
insn-peep.o : insn-peep.c $(CONFIG_H) $(RTL_H) $(REGS_H) output.h real.h \
- system.h insn-config.h $(RECOG_H) except.h function.h
+ $(SYSTEM_H) insn-config.h $(RECOG_H) except.h function.h $(TM_P_H)
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-peep.c
insn-peep.c: s-peep ; @true
s-peep : $(md_file) genpeep$(build_exeext) $(srcdir)/move-if-change
./genpeep$(build_exeext) $(md_file) > tmp-peep.c
$(SHELL) $(srcdir)/move-if-change tmp-peep.c insn-peep.c
- touch s-peep
+ $(STAMP) s-peep
insn-attrtab.o : insn-attrtab.c $(CONFIG_H) $(RTL_H) $(REGS_H) real.h \
- output.h $(INSN_ATTR_H) insn-config.h system.h toplev.h $(RECOG_H)
+ output.h $(INSN_ATTR_H) insn-config.h $(SYSTEM_H) toplev.h $(RECOG_H) \
+ $(TM_P_H) flags.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-attrtab.c
insn-attr.h: s-attr ; @true
s-attr : $(md_file) genattr$(build_exeext) $(srcdir)/move-if-change
./genattr$(build_exeext) $(md_file) > tmp-attr.h
$(SHELL) $(srcdir)/move-if-change tmp-attr.h insn-attr.h
- touch s-attr
+ $(STAMP) s-attr
insn-attrtab.c: s-attrtab ; @true
s-attrtab : $(md_file) genattrtab$(build_exeext) $(srcdir)/move-if-change
./genattrtab$(build_exeext) $(md_file) > tmp-attrtab.c
$(SHELL) $(srcdir)/move-if-change tmp-attrtab.c insn-attrtab.c
- touch s-attrtab
+ $(STAMP) s-attrtab
insn-output.o : insn-output.c $(CONFIG_H) $(RTL_H) $(GGC_H) $(REGS_H) real.h \
- conditions.h hard-reg-set.h insn-config.h insn-flags.h $(INSN_ATTR_H) \
- output.h $(RECOG_H) function.h insn-codes.h system.h toplev.h flags.h
+ conditions.h hard-reg-set.h insn-config.h $(INSN_ATTR_H) $(EXPR_H) \
+ output.h $(RECOG_H) function.h $(SYSTEM_H) toplev.h flags.h \
+ $(TM_P_H)
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-output.c
insn-output.c: s-output ; @true
s-output : $(md_file) genoutput$(build_exeext) $(srcdir)/move-if-change
./genoutput$(build_exeext) $(md_file) > tmp-output.c
$(SHELL) $(srcdir)/move-if-change tmp-output.c insn-output.c
- touch s-output
+ $(STAMP) s-output
-genrtl.o : genrtl.c $(CONFIG_H) $(RTL_H) system.h $(GGC_H)
+genrtl.o : genrtl.c $(CONFIG_H) $(RTL_H) $(SYSTEM_H) $(GGC_H)
genrtl.c genrtl.h : s-genrtl
@true # force gnu make to recheck modification times.
$(SHELL) $(srcdir)/move-if-change tmp-genrtl.h genrtl.h
./gengenrtl$(build_exeext) >tmp-genrtl.c
$(SHELL) $(srcdir)/move-if-change tmp-genrtl.c genrtl.c
- touch s-genrtl
+ $(STAMP) s-genrtl
#\f
# Compile the programs that generate insn-* from the machine description.
# They are compiled with $(HOST_CC), and associated libraries,
# about the target machine. They do depend on config.h itself,
# since that describes the host machine.
-gensupport.o: gensupport.c $(RTL_H) $(OBSTACK_H) system.h errors.h gensupport.h
+gensupport.o: gensupport.c $(RTL_H) $(OBSTACK_H) $(SYSTEM_H) errors.h gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gensupport.c
hashtab.o: $(srcdir)/../libiberty/hashtab.c $(GCONFIG_H)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genconfig.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
-genconfig.o : genconfig.c $(RTL_H) $(build_xm_file) \
- system.h errors.h gensupport.h
+genconfig.o : genconfig.c $(RTL_H) $(HCONFIG_H) \
+ $(SYSTEM_H) errors.h gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genconfig.c
genflags$(build_exeext) : genflags.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genflags.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
-genflags.o : genflags.c $(RTL_H) $(OBSTACK_H) $(build_xm_file) \
- system.h errors.h gensupport.h
+genflags.o : genflags.c $(RTL_H) $(OBSTACK_H) $(HCONFIG_H) \
+ $(SYSTEM_H) errors.h gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genflags.c
gencodes$(build_exeext) : gencodes.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
gencodes.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
-gencodes.o : gencodes.c $(RTL_H) $(build_xm_file) \
- system.h errors.h gensupport.h
+gencodes.o : gencodes.c $(RTL_H) $(HCONFIG_H) \
+ $(SYSTEM_H) errors.h gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gencodes.c
genemit$(build_exeext) : genemit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genemit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
-genemit.o : genemit.c $(RTL_H) $(build_xm_file) system.h errors.h gensupport.h
+genemit.o : genemit.c $(RTL_H) $(HCONFIG_H) $(SYSTEM_H) errors.h gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genemit.c
genopinit$(build_exeext) : genopinit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genopinit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
-genopinit.o : genopinit.c $(RTL_H) $(build_xm_file) \
- system.h errors.h gensupport.h
+genopinit.o : genopinit.c $(RTL_H) $(HCONFIG_H) \
+ $(SYSTEM_H) errors.h gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genopinit.c
genrecog$(build_exeext) : genrecog.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genrecog.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
-genrecog.o : genrecog.c $(RTL_H) $(build_xm_file) \
- system.h errors.h gensupport.h
- $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genrecog.c
+genrecog.o : genrecog.c $(RTL_H) $(HCONFIG_H) \
+ $(SYSTEM_H) errors.h gensupport.h
+ $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genrecog.c
genextract$(build_exeext) : genextract.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genextract.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
-genextract.o : genextract.c $(RTL_H) $(build_xm_file) \
- system.h insn-config.h errors.h gensupport.h
+genextract.o : genextract.c $(RTL_H) $(HCONFIG_H) \
+ $(SYSTEM_H) insn-config.h errors.h gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genextract.c
genpeep$(build_exeext) : genpeep.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genpeep.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
-genpeep.o : genpeep.c $(RTL_H) $(build_xm_file) system.h errors.h gensupport.h
+genpeep.o : genpeep.c $(RTL_H) $(HCONFIG_H) $(SYSTEM_H) errors.h gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genpeep.c
genattr$(build_exeext) : genattr.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genattr.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
-genattr.o : genattr.c $(RTL_H) $(build_xm_file) system.h errors.h gensupport.h
+genattr.o : genattr.c $(RTL_H) $(HCONFIG_H) $(SYSTEM_H) errors.h gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genattr.c
genattrtab$(build_exeext) : genattrtab.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genattrtab.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
-genattrtab.o : genattrtab.c $(RTL_H) $(OBSTACK_H) $(build_xm_file) \
- system.h errors.h $(GGC_H) gensupport.h
+genattrtab.o : genattrtab.c $(RTL_H) $(OBSTACK_H) $(HCONFIG_H) \
+ $(SYSTEM_H) errors.h $(GGC_H) gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genattrtab.c
genoutput$(build_exeext) : genoutput.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genoutput.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
-genoutput.o : genoutput.c $(RTL_H) $(build_xm_file) \
- system.h errors.h gensupport.h
+genoutput.o : genoutput.c $(RTL_H) $(HCONFIG_H) \
+ $(SYSTEM_H) errors.h gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genoutput.c
gengenrtl$(build_exeext) : gengenrtl.o $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
gengenrtl.o $(HOST_LIBS)
-gengenrtl.o : gengenrtl.c $(RTL_BASE_H) system.h real.h
+gengenrtl.o : gengenrtl.c $(RTL_BASE_H) $(HCONFIG_H) $(SYSTEM_H) real.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gengenrtl.c
#\f
# Compile the libraries to be used by gen*.
# If we are not cross-building, gen* use the same .o's that cc1 will use,
# and HOST_PREFIX_1 is `foobar', just to ensure these rules don't conflict
-# with the rules for rtl.o, alloca.o, etc.
-$(HOST_PREFIX_1)rtl.o: $(srcdir)/rtl.c $(GCONFIG_H) system.h $(RTL_H) \
+# with the rules for rtl.o, etc.
+$(HOST_PREFIX_1)rtl.o: $(srcdir)/rtl.c $(HCONFIG_H) $(SYSTEM_H) $(RTL_H) \
bitmap.h $(GGC_H) toplev.h $(HASHTAB_H)
rm -f $(HOST_PREFIX)rtl.c
sed -e 's/config[.]h/hconfig.h/' $(srcdir)/rtl.c > $(HOST_PREFIX)rtl.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)rtl.c
-$(HOST_PREFIX_1)print-rtl.o: $(srcdir)/print-rtl.c $(CONFIG_H) \
- $(RTL_H) $(BASIC_BLOCK_H) system.h
+$(HOST_PREFIX_1)print-rtl.o: $(srcdir)/print-rtl.c $(HCONFIG_H) \
+ $(RTL_H) $(BASIC_BLOCK_H) $(SYSTEM_H)
rm -f $(HOST_PREFIX)print-rtl.c
sed -e 's/config[.]h/hconfig.h/' $(srcdir)/print-rtl.c > $(HOST_PREFIX)print-rtl.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)print-rtl.c
-$(HOST_PREFIX_1)bitmap.o: $(srcdir)/bitmap.c $(CONFIG_H) system.h $(RTL_H) \
+$(HOST_PREFIX_1)bitmap.o: $(srcdir)/bitmap.c $(HCONFIG_H) $(SYSTEM_H) $(RTL_H) \
flags.h bitmap.h
rm -f $(HOST_PREFIX)bitmap.c
sed -e 's/config[.]h/hconfig.h/' $(srcdir)/bitmap.c > $(HOST_PREFIX)bitmap.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)bitmap.c
-$(HOST_PREFIX_1)rtlanal.o: $(srcdir)/rtlanal.c $(CONFIG_H) system.h $(RTL_H)
- rm -f $(HOST_PREFIX)rtlanal.c
- sed -e 's/config[.]h/hconfig.h/' $(srcdir)/rtlanal.c > $(HOST_PREFIX)rtlanal.c
- $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)rtlanal.c
-
-$(HOST_PREFIX_1)alloca.o: $(srcdir)/../libiberty/alloca.c
- rm -f $(HOST_PREFIX)alloca.c
- $(LN_S) $(srcdir)/../libiberty/alloca.c $(HOST_PREFIX)alloca.c
- $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)alloca.c
-
-$(HOST_PREFIX_1)obstack.o: $(srcdir)/../libiberty/obstack.c $(GCONFIG_H)
+$(HOST_PREFIX_1)obstack.o: $(srcdir)/../libiberty/obstack.c $(HCONFIG_H)
rm -f $(HOST_PREFIX)obstack.c
sed -e 's/config[.]h/hconfig.h/' $(srcdir)/../libiberty/obstack.c > $(HOST_PREFIX)obstack.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)obstack.c
-$(HOST_PREFIX_1)vfprintf.o: $(srcdir)/../libiberty/vfprintf.c
+$(HOST_PREFIX_1)vfprintf.o: $(srcdir)/../libiberty/vfprintf.c $(HCONFIG_H)
rm -f $(HOST_PREFIX)vfprintf.c
sed -e 's/config[.]h/hconfig.h/' $(srcdir)/../libiberty/vfprintf.c > $(HOST_PREFIX)vfprintf.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)vfprintf.c
-$(HOST_PREFIX_1)doprint.o: doprint.c
+$(HOST_PREFIX_1)doprint.o: doprint.c $(HCONFIG_H)
rm -f $(HOST_PREFIX)doprint.c
sed -e 's/config[.]h/hconfig.h/' $(srcdir)/doprint.c > $(HOST_PREFIX)doprint.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)doprint.c
-$(HOST_PREFIX_1)malloc.o: malloc.c
- rm -f $(HOST_PREFIX)malloc.c
- sed -e 's/config[.]h/hconfig.h/' $(srcdir)/malloc.c > $(HOST_PREFIX)malloc.c
- $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)malloc.c
+$(HOST_PREFIX_1)strstr.o: $(srcdir)/../libiberty/strstr.c $(HCONFIG_H)
+ rm -f $(HOST_PREFIX)strstr.c
+ sed -e 's/config[.]h/hconfig.h/' $(srcdir)/../libiberty/strstr.c > $(HOST_PREFIX)strstr.c
+ $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)strstr.c
-$(HOST_PREFIX_1)errors.o: errors.c
+$(HOST_PREFIX_1)errors.o: errors.c $(HCONFIG_H) $(SYSTEM_H)
rm -f $(HOST_PREFIX)errors.c
sed -e 's/config[.]h/hconfig.h/' $(srcdir)/errors.c > $(HOST_PREFIX)errors.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)errors.c
# This satisfies the dependency that we get if you cross-compile a compiler
-# that does not need to compile alloca, malloc or whatever.
+# that does not need to compile doprint or whatever.
$(HOST_PREFIX_1):
- touch $(HOST_PREFIX_1)
+ $(STAMP) $(HOST_PREFIX_1)
-$(HOST_PREFIX_1)ggc-none.o: ggc-none.c
+$(HOST_PREFIX_1)ggc-none.o: ggc-none.c $(HCONFIG_H) $(SYSTEM_H)
rm -f $(HOST_PREFIX)ggc-none.c
sed -e 's/config[.]h/hconfig.h/' $(srcdir)/ggc-none.c > $(HOST_PREFIX)ggc-none.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)ggc-none.c
#\f
# Remake internationalization support.
-intl.o: intl.c intl.h gansidecl.h Makefile
+intl.o: intl.c intl.h Makefile
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
-DLOCALEDIR=\"$(localedir)\" \
-c $(srcdir)/intl.c
PREPROCESSOR_DEFINES = \
-DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
-DGPLUSPLUS_INCLUDE_DIR=\"$(gcc_gxx_include_dir)\" \
- -DGPLUSPLUS_TOOL_INCLUDE_DIR=\"$(gcc_gxx_target_include_dir)\" \
+ -DGPLUSPLUS_TOOL_INCLUDE_DIR=\"$(gcc_gxx_include_dir)/$(target_alias)\" \
+ -DGPLUSPLUS_BACKWARD_INCLUDE_DIR=\"$(gcc_gxx_include_dir)/backward\" \
-DLOCAL_INCLUDE_DIR=\"$(includedir)\" \
-DCROSS_INCLUDE_DIR=\"$(gcc_tooldir)/sys-include\" \
-DTOOL_INCLUDE_DIR=\"$(gcc_tooldir)/include\"
LIBCPP_OBJS = cpplib.o cpplex.o cppmacro.o cppexp.o cppfiles.o \
cpphash.o cpperror.o cppinit.o cppdefault.o \
- mkdeps.o prefix.o version.o mbchar.o
+ hashtable.o mkdeps.o prefix.o version.o mbchar.o
-LIBCPP_DEPS = cpplib.h cpphash.h intl.h system.h
+LIBCPP_DEPS = cpplib.h cpphash.h hashtable.h intl.h $(OBSTACK_H) $(SYSTEM_H)
# Most of the other archives built/used by this makefile are for
# targets. This one is strictly for the host.
libcpp.a: $(LIBCPP_OBJS)
-rm -rf libcpp.a
$(AR) $(AR_FLAGS) libcpp.a $(LIBCPP_OBJS)
- if $(RANLIB_TEST) ; then $(RANLIB) libcpp.a ; else true ; fi
+ -$(RANLIB) libcpp.a
cpp0$(exeext): cppmain.o intl.o libcpp.a $(LIBDEPS)
$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o cpp0$(exeext) cppmain.o \
intl.o libcpp.a $(LIBS)
-cppmain.o: cppmain.c $(CONFIG_H) cpplib.h intl.h system.h
+cppmain.o: cppmain.c $(CONFIG_H) cpplib.h intl.h $(SYSTEM_H)
cpperror.o: cpperror.c $(CONFIG_H) $(LIBCPP_DEPS)
-cppexp.o: cppexp.c $(CONFIG_H) $(LIBCPP_DEPS) defaults.h
-cpplex.o: cpplex.c $(CONFIG_H) $(LIBCPP_DEPS)
+cppexp.o: cppexp.c $(CONFIG_H) $(LIBCPP_DEPS)
+cpplex.o: cpplex.c $(CONFIG_H) $(LIBCPP_DEPS) mbchar.h
cppmacro.o: cppmacro.c $(CONFIG_H) $(LIBCPP_DEPS)
-cpplib.o: cpplib.c $(CONFIG_H) $(LIBCPP_DEPS) $(OBSTACK_H)
-cpphash.o: cpphash.c $(CONFIG_H) $(LIBCPP_DEPS) $(OBSTACK_H)
+cpplib.o: cpplib.c $(CONFIG_H) $(LIBCPP_DEPS)
+cpphash.o: cpphash.c $(CONFIG_H) $(LIBCPP_DEPS)
cppfiles.o: cppfiles.c $(CONFIG_H) $(LIBCPP_DEPS) $(SPLAY_TREE_H) mkdeps.h
cppinit.o: cppinit.c $(CONFIG_H) $(LIBCPP_DEPS) cppdefault.h \
mkdeps.h prefix.h output.h version.h
-cppdefault.o: cppdefault.c $(CONFIG_H) system.h cppdefault.h Makefile
+cppdefault.o: cppdefault.c $(CONFIG_H) $(SYSTEM_H) cppdefault.h Makefile
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
$(PREPROCESSOR_DEFINES) \
-c $(srcdir)/cppdefault.c
-mkdeps.o: mkdeps.c $(CONFIG_H) system.h mkdeps.h
+mkdeps.o: mkdeps.c $(CONFIG_H) $(SYSTEM_H) mkdeps.h
# The traditional mode preprocessor, a separate program for ease of
# maintenance. Some code is shared with the ISO-C cpp.
-tradcpp0$(exeext): tradcpp.o tradcif.o cppdefault.o version.o intl.o $(LIBDEPS)
+tradcpp0$(exeext): tradcpp.o tradcif.o cppdefault.o version.o intl.o \
+ mkdeps.o $(LIBDEPS)
$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o tradcpp0$(exeext) \
- tradcpp.o tradcif.o cppdefault.o version.o intl.o $(LIBS)
+ tradcpp.o tradcif.o mkdeps.o cppdefault.o version.o intl.o $(LIBS)
-tradcpp.o: tradcpp.c $(CONFIG_H) system.h version.h cppdefault.h tradcpp.h
-tradcif.o: $(srcdir)/tradcif.c $(CONFIG_H) system.h defaults.h tradcpp.h
+tradcpp.o: tradcpp.c $(CONFIG_H) $(SYSTEM_H) version.h cppdefault.h tradcpp.h
+tradcif.o: $(srcdir)/tradcif.c $(CONFIG_H) $(SYSTEM_H) tradcpp.h
$(srcdir)/tradcif.c: $(srcdir)/tradcif.y
(cd $(srcdir) && $(BISON) $(BISONFLAGS) -o tr$$$$.c tradcif.y && \
unprotoize$(exeext): unprotoize.o $(PROTO_OBJS) $(LIBDEPS)
$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ unprotoize.o $(PROTO_OBJS) $(LIBS)
-protoize.o: protoize.c $(srcdir)/../include/getopt.h $(CONFIG_H) system.h \
+protoize.o: protoize.c $(srcdir)/../include/getopt.h $(CONFIG_H) $(SYSTEM_H) \
Makefile version.h
+ (SHLIB_LINK='$(SHLIB_LINK)' \
+ SHLIB_MULTILIB='$(SHLIB_MULTILIB)'; \
$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
$(DRIVER_DEFINES) $(PREPROCESSOR_DEFINES) \
- $(srcdir)/protoize.c $(OUTPUT_OPTION)
+ $(srcdir)/protoize.c $(OUTPUT_OPTION))
unprotoize.o: unprotoize.c protoize.c $(srcdir)/../include/getopt.h \
- $(CONFIG_H) system.h Makefile version.h
+ $(CONFIG_H) $(SYSTEM_H) Makefile version.h
+ (SHLIB_LINK='$(SHLIB_LINK)' \
+ SHLIB_MULTILIB='$(SHLIB_MULTILIB)'; \
$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
$(DRIVER_DEFINES) $(PREPROCESSOR_DEFINES) \
- $(srcdir)/unprotoize.c $(OUTPUT_OPTION)
+ $(srcdir)/unprotoize.c $(OUTPUT_OPTION))
# This info describes the target machine, so compile with GCC just built.
SYSCALLS.c.X: $(srcdir)/sys-types.h $(srcdir)/sys-protos.h $(GCC_PASSES) \
diff $(srcdir)/protoize.c tmp-proto.c | cat
-rm -f tmp-proto.[cs] tmp-proto$(objext)
-gcov.o: gcov.c gcov-io.h intl.h system.h $(CONFIG_H)
+gcov.o: gcov.c gcov-io.h intl.h $(SYSTEM_H) $(CONFIG_H)
# Only one of 'gcov' or 'gcov.exe' is actually built, depending
# upon whether $(exeext) is empty or not.
for file in .. $(USER_H); do \
if [ X$$file != X.. ]; then \
realfile=`echo $$file | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
- touch include/$$realfile; \
+ $(STAMP) include/$$realfile; \
rm -f include/$$realfile; \
cp $$file include; \
chmod a+r include/$$realfile; \
rm -f include/README
cp $(srcdir)/README-fixinc include/README
chmod a+r include/README
- touch $@
+ $(STAMP) $@
# fixinc.sh depends on this, not on specs directly.
# The idea is to make sure specs gets built, but not rerun fixinc.sh
-if [ -f specs.ready ] ; then \
true; \
else \
- touch specs.ready; \
+ $(STAMP) specs.ready; \
fi
FIXINCSRCDIR=$(srcdir)/fixinc
stmp-fixinc: fixinc.sh gsyslimits.h
rm -rf include; mkdir include
-chmod a+rx include
- (TARGET_MACHINE=$(target); srcdir=`cd $(srcdir); pwd`; \
- INSTALL_ASSERT_H=$(INSTALL_ASSERT_H); SHELL=$(SHELL) ;\
- export TARGET_MACHINE srcdir INSTALL_ASSERT_H SHELL ; \
+ (TARGET_MACHINE='$(target)'; srcdir=`cd $(srcdir); pwd`; \
+ SHELL='$(SHELL)' ;\
+ export TARGET_MACHINE srcdir SHELL ; \
$(SHELL) ./fixinc.sh `pwd`/include $(SYSTEM_HEADER_DIR) $(OTHER_FIXINCLUDES_DIRS); \
rm -f include/syslimits.h; \
if [ -f include/limits.h ]; then \
if [ -d $(libdir)/gcc-lib/$(target_alias) ] ; then true ; else mkdir $(libdir)/gcc-lib/$(target_alias) ; fi; \
if [ -d $(libdir)/gcc-lib/$(target_alias)/$(version) ] ; then true ; else mkdir $(libdir)/gcc-lib/$(target_alias)/$(version) ; fi; \
else true; fi
- touch stmp-fixinc
+ $(STAMP) stmp-fixinc
# Files related to the fixproto script.
# gen-protos and fix-header are compiled with HOST_CC, but they are only
$(SHELL) $(srcdir)/scan-types.sh "$(srcdir)" >tmp-deduced.h; \
mv tmp-deduced.h deduced.h; \
else \
- touch deduced.h; \
+ $(STAMP) deduced.h; \
fi
GEN_PROTOS_OBJS = gen-protos.o scan.o
${HOST_CC} $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
$(GEN_PROTOS_OBJS) ../libiberty/libiberty.a
-gen-protos.o: gen-protos.c scan.h $(build_xm_file) system.h
+gen-protos.o: gen-protos.c scan.h $(HCONFIG_H) $(SYSTEM_H)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gen-protos.c
-scan.o: scan.c scan.h $(build_xm_file) system.h
+scan.o: scan.c scan.h $(HCONFIG_H) $(SYSTEM_H)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/scan.c
xsys-protos.h: $(GCC_PASSES) $(srcdir)/sys-protos.h deduced.h gen-protos$(build_exeext) Makefile
# This is nominally a 'build' program, but it's run only when host==build,
# so we can (indeed, must) use $(LIBDEPS) and $(LIBS).
-fix-header: fix-header.o scan-decls.o scan.o xsys-protos.h $(LIBDEPS) \
- libcpp.a
+fix-header$(build_exeext): fix-header.o scan-decls.o scan.o xsys-protos.h \
+ $(LIBDEPS) libcpp.a
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ fix-header.o \
scan-decls.o scan.o libcpp.a $(LIBS)
fix-header.o: fix-header.c $(OBSTACK_H) scan.h \
- xsys-protos.h $(build_xm_file) system.h cpplib.h
+ xsys-protos.h $(HCONFIG_H) $(SYSTEM_H) cpplib.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/fix-header.c
-scan-decls.o: scan-decls.c scan.h cpplib.h $(build_xm_file) system.h
+scan-decls.o: scan-decls.c scan.h cpplib.h $(HCONFIG_H) $(SYSTEM_H)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/scan-decls.c
# stmp-fixproto depends on this, not on fix-header directly.
# The idea is to make sure fix-header gets built,
# but not rerun fixproto after each stage
# just because fix-header's mtime has changed.
-fixhdr.ready: fix-header
+fixhdr.ready: fix-header$(build_exeext)
-if [ -f fixhdr.ready ] ; then \
true; \
else \
- touch fixhdr.ready; \
+ $(STAMP) fixhdr.ready; \
fi
# stmp-int-headers is to make sure fixincludes has already finished.
$(SHELL) ${srcdir}/fixproto include include $(SYSTEM_HEADER_DIR); \
if [ $$? -eq 0 ] ; then true ; else exit 1 ; fi ; \
else true; fi; \
- touch include/fixed; \
+ $(STAMP) include/fixed; \
fi
- touch stmp-fixproto
+ $(STAMP) stmp-fixproto
#\f
# Remake the info files.
doc: $(BUILD_INFO) gccbug
-info: $(srcdir)/cpp.info $(srcdir)/gcc.info lang.info $(srcdir)/c-tree.info
+info: $(srcdir)/cpp.info $(srcdir)/gcc.info lang.info $(srcdir)/cppinternals.info
$(srcdir)/cpp.info: $(srcdir)/cpp.texi
cd $(srcdir) && $(MAKEINFO) $(MAKEINFOFLAGS) -o cpp.info cpp.texi
$(srcdir)/gcc.info: $(srcdir)/gcc.texi $(srcdir)/extend.texi $(srcdir)/install.texi \
- $(srcdir)/invoke.texi $(srcdir)/md.texi $(srcdir)/rtl.texi \
- $(srcdir)/tm.texi $(srcdir)/gcov.texi
+ $(srcdir)/invoke.texi $(srcdir)/md.texi $(srcdir)/c-tree.texi \
+ $(srcdir)/rtl.texi $(srcdir)/tm.texi $(srcdir)/gcov.texi \
+ $(srcdir)/contrib.texi $(srcdir)/objc.texi $(srcdir)/fdl.texi
cd $(srcdir) && $(MAKEINFO) $(MAKEINFOFLAGS) -o gcc.info gcc.texi
-$(srcdir)/c-tree.info: $(srcdir)/c-tree.texi
- cd $(srcdir) && $(MAKEINFO) $(MAKEINFOFLAGS) -o c-tree.info \
- c-tree.texi
+$(srcdir)/cppinternals.info: $(srcdir)/cppinternals.texi
+ cd $(srcdir) && $(MAKEINFO) $(MAKEINFOFLAGS) -o cppinternals.info \
+ cppinternals.texi
-dvi: gcc.dvi cpp.dvi lang.dvi
+dvi: gcc.dvi cpp.dvi lang.dvi cppinternals.dvi
# This works with GNU Make's default rule.
+cpp.dvi: $(srcdir)/cpp.texi
+ $(TEXI2DVI) -I $(srcdir) $(srcdir)/cpp.texi
+
gcc.dvi: $(srcdir)/gcc.texi $(srcdir)/extend.texi $(srcdir)/install.texi \
- $(srcdir)/invoke.texi $(srcdir)/md.texi $(srcdir)/rtl.texi \
- $(srcdir)/tm.texi $(srcdir)/gcov.texi
- TEXINPUTS=${texidir}:$(srcdir):$$TEXINPUTS tex gcc.texi
- texindex gcc.??
- TEXINPUTS=${texidir}:$(srcdir):$$TEXINPUTS tex gcc.texi
+ $(srcdir)/invoke.texi $(srcdir)/md.texi $(srcdir)/c-tree.texi \
+ $(srcdir)/rtl.texi $(srcdir)/tm.texi $(srcdir)/gcov.texi \
+ $(srcdir)/contrib.texi $(srcdir)/objc.texi $(srcdir)/fdl.texi
+ $(TEXI2DVI) -I $(srcdir) $(srcdir)/gcc.texi
-cpp.dvi: $(srcdir)/cpp.texi
- TEXINPUTS=${texidir}:$(srcdir):$$TEXINPUTS tex cpp.texi
- texindex cpp.??
- TEXINPUTS=${texidir}:$(srcdir):$$TEXINPUTS tex cpp.texi
+cppinternals.dvi: $(srcdir)/cppinternals.texi
+ $(TEXI2DVI) -I $(srcdir) $(srcdir)/cppinternals.texi
+
+generated-manpages: $(srcdir)/gcov.1 $(srcdir)/cpp.1 $(srcdir)/gcc.1
$(srcdir)/gcov.1: $(srcdir)/gcov.texi
- $(TEXI2POD) < $(srcdir)/gcov.texi > gcov.pod
- ($(POD2MAN) gcov.pod > $(srcdir)/gcov.1.T$$$$ && \
+ $(STAMP) $(srcdir)/gcov.1
+ -$(TEXI2POD) < $(srcdir)/gcov.texi > gcov.pod
+ -($(POD2MAN) gcov.pod > $(srcdir)/gcov.1.T$$$$ && \
mv -f $(srcdir)/gcov.1.T$$$$ $(srcdir)/gcov.1) || \
(rm -f $(srcdir)/gcov.1.T$$$$ && exit 1)
- rm -f gcov.pod
+ -rm -f gcov.pod
+
+$(srcdir)/cpp.1: $(srcdir)/cpp.texi
+ $(STAMP) $(srcdir)/cpp.1
+ -$(TEXI2POD) < $(srcdir)/cpp.texi > cpp.pod
+ -($(POD2MAN) cpp.pod > $(srcdir)/cpp.1.T$$$$ && \
+ mv -f $(srcdir)/cpp.1.T$$$$ $(srcdir)/cpp.1) || \
+ (rm -f $(srcdir)/cpp.1.T$$$$ && exit 1)
+ -rm -f cpp.pod
+
+$(srcdir)/gcc.1: $(srcdir)/invoke.texi
+ $(STAMP) $(srcdir)/gcc.1
+ -$(TEXI2POD) < $(srcdir)/invoke.texi > gcc.pod
+ -($(POD2MAN) gcc.pod > $(srcdir)/gcc.1.T$$$$ && \
+ mv -f $(srcdir)/gcc.1.T$$$$ $(srcdir)/gcc.1) || \
+ (rm -f $(srcdir)/gcc.1.T$$$$ && exit 1)
+ -rm -f gcc.pod
#\f
# Deletion of files made during compilation.
-rm -f $(STAGESTUFF)
-rm -rf libgcc
# Delete the temporary source copies for cross compilation.
- -rm -f $(HOST_PREFIX_1)rtl.c $(HOST_PREFIX_1)rtlanal.c
- -rm -f $(HOST_PREFIX_1)alloca.c $(HOST_PREFIX_1)malloc.c
+ -rm -f $(HOST_PREFIX_1)rtl.c
-rm -f $(HOST_PREFIX_1)obstack.c
# Delete the temp files made in the course of building libgcc.a.
- -rm -f xlimits.h libgcc1-test
- for name in $(LIB1FUNCS); do rm -f $${name}.c; done
+ -rm -f xlimits.h
# Delete other built files.
-rm -f t-float.h-cross xsys-protos.hT
# Delete the stamp and temporary files.
-rm -f *.[0-9][0-9].* */*.[0-9][0-9].*
# Delete some files made during installation.
-rm -f specs float.h-* enquire SYSCALLS.c.X SYSCALLS.c
- -rm -f collect collect2 mips-tfile mips-tdump alloca.s
+ -rm -f collect collect2 mips-tfile mips-tdump
# Delete files generated for fixproto
- -rm -rf fix-header xsys-protos.h deduced.h tmp-deduced.h \
+ -rm -rf fix-header$(build_exeext) xsys-protos.h deduced.h tmp-deduced.h \
gen-protos$(build_exeext) fixproto.list fixtmp.* fixhdr.ready
# Delete files generated for fixincl
-rm -rf fixincl fixinc.sh specs.ready
# that don't exist in the distribution.
INTL_CLEAN = intl.clean
clean: mostlyclean $(INTL_CLEAN) lang.clean
- -rm -f libgcc.a libgcc_s$(SHLIB_EXT)
+ -rm -f libgcc.a libgcc_s$(SHLIB_EXT) libgcc_s$(SHLIB_EXT).0
+ -rm -f config.h tconfig.h hconfig.h tm_p.h
+ -rm -f cs-*
-rm -rf libgcc
-rm -f *.dvi
-rm -f */*.dvi
fi ; fi
-rm -fr stage1 stage2 stage3 stage4
# Delete stamps of bootstrap stages
- -rm -f stage_*
- -rm -f clean_*
+ -rm -f stage?_*
+ -rm -f clean?_*
+ -rm -f stage_last
# Delete all files that users would normally create
# while building and installing GCC.
INTL_DISTCLEAN = intl.distclean
distclean: clean $(INTL_DISTCLEAN) lang.distclean
- -rm -f tm.h tm_p.h config.h auto-host.h auto-build.h tconfig.h hconfig.h
+ -rm -f auto-host.h auto-build.h
-rm -f cstamp-h
-rm -f config.status config.run config.cache config.bak
-rm -f Make-lang Make-hooks Make-host Make-target
-rm -f site.exp site.bak testsuite/site.exp testsuite/site.bak
-rm -f testsuite/{gcc,g++}.{log,sum}
-rm -f intl/libintl.h libintl.h
- -rm -f cxxmain.c splay-tree.c obstack.c alloca.c hashtab.c safe-ctype.c
+ -rm -f cxxmain.c splay-tree.c obstack.c hashtab.c safe-ctype.c
-rm -f mklibgcc libgcc.map gccbug .gdbinit configargs.h
-rm -f gcov.pod
-rm -f fixinc/Makefile
-rm -f c-parse.y c-parse.c c-parse.output TAGS
-rm -f cpp.??s cpp.*aux
-rm -f gcc.??s gcc.*aux
- -rm -f $(srcdir)/cpp.info* $(srcdir)/gcc.info* $(srcdir)/c-tree.info*
- -rm -f $(srcdir)/gcov.1
+ -rm -f $(srcdir)/cpp.info* $(srcdir)/gcc.info*
+ -rm -f $(srcdir)/cppinternals.info*
+ -rm -f $(srcdir)/gcov.1 $(srcdir)/cpp.1 $(srcdir)/gcc.1
#\f
# Entry points `install' and `uninstall'.
# Also use `install-collect2' to install collect2 when the config files don't.
done
-if [ -d $(bindir) ] ; then true ; else mkdir $(bindir) ; chmod a+rx $(bindir) ; fi
-if [ -d $(includedir) ] ; then true ; else mkdir $(includedir) ; chmod a+rx $(includedir) ; fi
- -if [ -d $(gcc_tooldir) ] ; then true ; else mkdir $(gcc_tooldir) ; chmod a+rx $(gcc_tooldir) ; fi
- -if [ -d $(assertdir) ] ; then true ; else mkdir $(assertdir) ; chmod a+rx $(assertdir) ; fi
-if [ -d $(infodir) ] ; then true ; else mkdir $(infodir) ; chmod a+rx $(infodir) ; fi
+ -if [ -d $(slibdir) ] ; then true ; else mkdir $(slibdir) ; chmod a+rx $(slibdir) ; fi
# We don't use mkdir -p to create the parents of man1dir,
# because some systems don't support it.
# Instead, we use this technique to create the immediate parent of man1dir.
-if [ -d $(man1dir) ] ; then true ; else mkdir $(man1dir) ; chmod a+rx $(man1dir) ; fi
# Install the compiler executables built during cross compilation.
-install-common: native installdirs $(EXTRA_PARTS) lang.install-common
+install-common: native $(EXTRA_PARTS) lang.install-common
for file in $(COMPILERS); do \
if [ -f $$file ] ; then \
rm -f $(libsubdir)/$$file; \
# Install the driver program as $(target_alias)-gcc
# and also as either gcc (if native) or $(gcc_tooldir)/bin/gcc.
-install-driver: xgcc$(exeext)
+install-driver: installdirs xgcc$(exeext)
-if [ -f gcc-cross$(exeext) ] ; then \
rm -f $(bindir)/$(GCC_CROSS_NAME)$(exeext); \
$(INSTALL_PROGRAM) gcc-cross$(exeext) $(bindir)/$(GCC_CROSS_NAME)$(exeext); \
# to do the install.
install-info: doc installdirs lang.install-info
-rm -f $(infodir)/cpp.info* $(infodir)/gcc.info*
+ -rm -f $(infodir)/cppinternals.info*
if [ -f $(srcdir)/gcc.info ]; then \
- for f in $(srcdir)/cpp.info* $(srcdir)/gcc.info*; do \
+ for f in $(srcdir)/cpp.info* $(srcdir)/gcc.info* \
+ $(srcdir)/cppinternals.info*; do \
realfile=`echo $$f | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
$(INSTALL_DATA) $$f $(infodir)/$$realfile; \
done; \
else true; fi
-if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \
if [ -f $(infodir)/dir ] ; then \
- for f in cpp.info gcc.info; do \
+ for f in cpp.info gcc.info cppinternals.info; do \
if [ -f $(infodir)/$$f ]; then \
install-info --dir-file=$(infodir)/dir $(infodir)/$$f; \
else true; fi \
else true; fi; \
else true; fi;
-chmod a-x $(infodir)/cpp.info* $(infodir)/gcc.info*
+ -chmod a-x $(infodir)/cppinternals.info*
# Install the man pages.
-install-man: installdirs $(srcdir)/gcc.1 $(srcdir)/cpp.1 $(srcdir)/gcov.1 lang.install-man
+install-man: installdirs $(GENERATED_MANPAGES) lang.install-man
-if [ -f gcc-cross$(exeext) ] ; then \
rm -f $(man1dir)/$(GCC_CROSS_NAME)$(manext); \
$(INSTALL_DATA) $(srcdir)/gcc.1 $(man1dir)/$(GCC_CROSS_NAME)$(manext); \
fi
-rm -f $(man1dir)/cpp$(manext)
-$(INSTALL_DATA) $(srcdir)/cpp.1 $(man1dir)/cpp$(manext)
+ -chmod a-x $(man1dir)/cpp$(manext)
-rm -f $(man1dir)/gcov$(manext)
-$(INSTALL_DATA) $(srcdir)/gcov.1 $(man1dir)/gcov$(manext)
- -chmod a-x $(man1dir)/cpp$(manext)
+ -chmod a-x $(man1dir)/gcov$(manext)
# Install the library.
-install-libgcc: libgcc.a installdirs
- -if [ -f libgcc.a ] ; then \
- rm -f $(libsubdir)/libgcc.a; \
- $(INSTALL_DATA) libgcc.a $(libsubdir)/libgcc.a; \
- if $(RANLIB_TEST_FOR_TARGET) ; then \
- (cd $(libsubdir); $(RANLIB_FOR_TARGET) libgcc.a); else true; fi; \
- chmod a-x $(libsubdir)/libgcc.a; \
- else true; fi
+install-libgcc: libgcc.mk libgcc.a installdirs
+ if $(RANLIB_TEST_FOR_TARGET); then \
+ r_f_t=$(RANLIB_FOR_TARGET); \
+ else \
+ r_f_t=: ; \
+ fi; \
+ $(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
+ HOST_PREFIX="$(HOST_PREFIX)" HOST_PREFIX_1="$(HOST_PREFIX_1)" \
+ AR_FOR_TARGET="$(AR_FOR_TARGET)" \
+ AR_CREATE_FOR_TARGET="$(AR_CREATE_FOR_TARGET)" \
+ AR_FLAGS_FOR_TARGET="$(AR_FLAGS_FOR_TARGET)" \
+ CFLAGS="$(CFLAGS) $(WARN_CFLAGS)" \
+ RANLIB_TEST_FOR_TARGET="$(RANLIB_TEST_FOR_TARGET)" \
+ NM_FOR_TARGET="$(NM_FOR_TARGET)" AWK="$(AWK)" \
+ LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" \
+ INCLUDES="$(INCLUDES)" MAYBE_USE_COLLECT2="$(MAYBE_USE_COLLECT2)" \
+ CONFIG_H="$(TCONFIG_H)" MACHMODE_H="$(MACHMODE_H)" \
+ LIB1ASMSRC='$(LIB1ASMSRC)' \
+ MAKEOVERRIDES= \
+ INSTALL_DATA="$(INSTALL_DATA)" \
+ RANLIB_FOR_TARGET="$$r_f_t" \
+ libsubdir="$(libsubdir)" \
+ slibdir="$(slibdir)" \
+ -f libgcc.mk install
# Install multiple versions of libgcc.a.
install-multilib: stmp-multilib installdirs
- for i in `$(GCC_FOR_TARGET) --print-multi-lib`; do \
- dir=`echo $$i | sed -e 's/;.*$$//'`; \
- if [ -d $(libsubdir)/$${dir} ]; then true; else mkdir $(libsubdir)/$${dir}; chmod a+rx $(libsubdir)/$${dir}; fi; \
- for f in libgcc.a $(EXTRA_MULTILIB_PARTS); do \
- rm -f $(libsubdir)/$${dir}/$${f}; \
- $(INSTALL_DATA) $${dir}/$${f} $(libsubdir)/$${dir}/$${f}; \
- done; \
- if $(RANLIB_TEST_FOR_TARGET); then \
- (cd $(libsubdir)/$${dir}; $(RANLIB_FOR_TARGET) libgcc.a); \
- else true; fi; \
- chmod a-x $(libsubdir)/$${dir}/libgcc.a; \
- done
+ if $(RANLIB_TEST_FOR_TARGET); then \
+ r_f_t=$(RANLIB_FOR_TARGET); \
+ else \
+ r_f_t=: ; \
+ fi; \
+ $(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
+ HOST_PREFIX="$(HOST_PREFIX)" HOST_PREFIX_1="$(HOST_PREFIX_1)" \
+ AR_FOR_TARGET="$(AR_FOR_TARGET)" \
+ AR_CREATE_FOR_TARGET="$(AR_CREATE_FOR_TARGET)" \
+ AR_FLAGS_FOR_TARGET="$(AR_FLAGS_FOR_TARGET)" \
+ CFLAGS="$(CFLAGS) $(WARN_CFLAGS)" \
+ RANLIB_TEST_FOR_TARGET="$(RANLIB_TEST_FOR_TARGET)" \
+ NM_FOR_TARGET="$(NM_FOR_TARGET)" AWK="$(AWK)" \
+ LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" \
+ INCLUDES="$(INCLUDES)" MAYBE_USE_COLLECT2="$(MAYBE_USE_COLLECT2)" \
+ CONFIG_H="$(CONFIG_H)" MACHMODE_H="$(MACHMODE_H)" \
+ LIB1ASMSRC='$(LIB1ASMSRC)' \
+ MAKEOVERRIDES= \
+ INSTALL_DATA="$(INSTALL_DATA)" \
+ RANLIB_FOR_TARGET="$$r_f_t" \
+ libsubdir="$(libsubdir)" \
+ slibdir="$(slibdir)" \
+ -f libgcc.mk install
# Install all the header files built in the include subdirectory.
-install-headers: install-include-dir $(INSTALL_HEADERS_DIR) $(INSTALL_ASSERT_H)
+install-headers: $(INSTALL_HEADERS_DIR)
# Fix symlinks to absolute paths in the installed include directory to
# point to the installed directory, not the build directory.
# Don't need to use LN_S here since we really do need ln -s and no substitutes.
cd `pwd`/include ; \
find . -print | cpio -pdum $(libsubdir)/include
-# Put assert.h where it won't override GNU libc's assert.h.
-# It goes in a dir that is searched after GNU libc's headers;
-# thus, the following conditionals are no longer needed.
-# But it's not worth deleting them now.
-## Don't replace the assert.h already there if it is not from GCC.
-## This code would be simpler if it tested for -f ... && ! grep ...
-## but supposedly the ! operator is missing in sh on some systems.
-install-assert-h: assert.h installdirs
- if [ -f $(assertdir)/assert.h ]; \
- then \
- if grep "__eprintf" $(assertdir)/assert.h >/dev/null; \
- then \
- rm -f $(assertdir)/assert.h; \
- $(INSTALL_DATA) $(srcdir)/assert.h $(assertdir)/assert.h; \
- chmod a-x $(assertdir)/assert.h; \
- else true; \
- fi; \
- else \
- rm -f $(assertdir)/assert.h; \
- $(INSTALL_DATA) $(srcdir)/assert.h $(assertdir)/assert.h; \
- chmod a-x $(assertdir)/assert.h; \
- fi
-
# Use this target to install the program `collect2' under the name `collect2'.
install-collect2: collect2 installdirs
$(INSTALL_PROGRAM) collect2$(exeext) $(libsubdir)/collect2$(exeext)
-rm -rf $(man1dir)/protoize$(manext)
-rm -rf $(man1dir)/unprotoize$(manext)
-rm -f $(infodir)/cpp.info* $(infodir)/gcc.info*
+ -rm -f $(infodir)/cppinternals.info*
#\f
# These targets are for the dejagnu testsuites. The file site.exp
# contains global variables that all the testsuites will use.
site.exp: ./config.status Makefile
@echo "Making a new config file..."
-@rm -f ./tmp?
- @touch site.exp
+ @$(STAMP) site.exp
-@mv site.exp site.bak
@echo "## these variables are automatically generated by make ##" > ./tmp0
@echo "# Do not edit here. If you wish to override these values" >> ./tmp0
# CFLAGS is set even though it's empty to show we reserve the right to set it.
@echo "set CFLAGS \"\"" >> ./tmp0
@echo "set CXXFLAGS \"-I$(objdir)/../$(target_subdir)libio -I\$$srcdir/../libg++/src -I\$$srcdir/../libio -I\$$srcdir/../libstdc++ -I\$$srcdir/../libstdc++/stl -L$(objdir)/../$(target_subdir)libg++ -L$(objdir)/../$(target_subdir)libstdc++\"" >> ./tmp0
- @echo "set HAVE_LIBSTDCXX_V3 @HAVE_LIBSTDCXX_V3@" >> ./tmp0
+ @echo "set TESTING_IN_BUILD_TREE 1" >> ./tmp0
+ @echo "set HAVE_LIBSTDCXX_V3 1" >> ./tmp0
# If newlib has been configured, we need to pass -B to gcc so it can find
# newlib's crt0.o if it exists. This will cause a "path prefix not used"
# message if it doesn't, but the testsuite is supposed to ignore the message -
-e '1,/^## All variables above are.*##/ d' >> site.exp
-@rm -f ./tmp?
-CHECK_TARGETS = check-gcc check-g++ check-g77 check-objc @CHECK_PO@
+CHECK_TARGETS = check-gcc @check_languages@ @CHECK_PO@
-check: $(CHECK_TARGETS)
+check-c++ : check-g++
+check-f77 : check-g77
+check-java :
-testsuite/site.exp: site.exp
- if [ -d testsuite ]; then \
- true; \
- else \
- mkdir testsuite; \
- fi
- rm -rf testsuite/site.exp
- cp site.exp testsuite/site.exp
+check: $(CHECK_TARGETS)
-check-g++: testsuite/site.exp
+# The idea is to parallelize testing of multilibs, for example:
+# make -j3 check-gcc//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
+# will run 3 concurrent sessions of check-gcc, eventually testing
+# all 10 combinations. GNU make is required, as is a shell that expands
+# alternations within braces.
+check-gcc//% check-g++//% check-g77//% check-objc//%: site.exp
+ target=`echo "$@" | sed 's,//.*,,'`; \
+ variant=`echo "$@" | sed 's,^[^/]*//,,'`; \
+ vardots=`echo "$$variant" | sed 's,/,.,g'`; \
+ $(MAKE) TESTSUITEDIR="testsuite.$$vardots" \
+ RUNTESTFLAGS="--target_board=$$variant $(RUNTESTFLAGS)" \
+ "$$target"
+
+TESTSUITEDIR = testsuite
+
+$(TESTSUITEDIR)/site.exp: site.exp
+ test -d $(TESTSUITEDIR) || mkdir $(TESTSUITEDIR)
+ -rm -f $@
+ sed '/set tmpdir/ s|testsuite|$(TESTSUITEDIR)|' < site.exp > $@
+
+check-g++: $(TESTSUITEDIR)/site.exp
-(rootme=`pwd`; export rootme; \
srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
- cd testsuite; \
+ cd $(TESTSUITEDIR); \
EXPECT=${EXPECT} ; export EXPECT ; \
if [ -f $${rootme}/../expect/expect ] ; then \
TCL_LIBRARY=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \
export TCL_LIBRARY ; fi ; \
$(RUNTEST) --tool g++ $(RUNTESTFLAGS))
-check-gcc: testsuite/site.exp
+check-gcc: $(TESTSUITEDIR)/site.exp
-(rootme=`pwd`; export rootme; \
srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
- cd testsuite; \
+ cd $(TESTSUITEDIR); \
EXPECT=${EXPECT} ; export EXPECT ; \
if [ -f $${rootme}/../expect/expect ] ; then \
TCL_LIBRARY=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \
export TCL_LIBRARY ; fi ; \
$(RUNTEST) --tool gcc $(RUNTESTFLAGS))
-check-g77: testsuite/site.exp
+check-g77: $(TESTSUITEDIR)/site.exp
-(rootme=`pwd`; export rootme; \
srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
- cd testsuite; \
+ cd $(TESTSUITEDIR); \
EXPECT=${EXPECT} ; export EXPECT ; \
if [ -f $${rootme}/../expect/expect ] ; then \
TCL_LIBRARY=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \
export TCL_LIBRARY ; fi ; \
$(RUNTEST) --tool g77 $(RUNTESTFLAGS))
-check-objc: testsuite/site.exp
+check-objc: $(TESTSUITEDIR)/site.exp
-(rootme=`pwd`; export rootme; \
srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
- cd testsuite; \
+ cd $(TESTSUITEDIR); \
EXPECT=${EXPECT} ; export EXPECT ; \
if [ -f $${rootme}/../expect/expect ] ; then \
TCL_LIBRARY=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \
$(MAKE) -C po check-po; \
fi
+check-consistency: testsuite/site.exp
+ -rootme=`pwd`; export rootme; \
+ srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
+ cd testsuite; \
+ EXPECT=${EXPECT} ; export EXPECT ; \
+ if [ -f $${rootme}/../expect/expect ] ; then \
+ TCL_LIBRARY=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \
+ export TCL_LIBRARY ; fi ; \
+ $(RUNTEST) --tool consistency $(RUNTESTFLAGS)
+
# These exist for maintenance purposes.
# Update the tags table.
STRICT_WARN="$(STRICT2_WARN)" \
libdir=$(libdir) \
LANGUAGES="$(LANGUAGES)" \
+ MAKEOVERRIDES= \
OUTPUT_OPTION="-o \$$@"
# Only build the C compiler for stage1, because that is the only one that
# we can guarantee will build with the native compiler, and also it is the
-# only thing useful for building stage2.
-stage_a:
- +$(MAKE) CC="$(CC)" libdir=$(libdir) LANGUAGES="$(BOOT_LANGUAGES)"
- touch stage_a
-
-stage_b: stage_a
+# only thing useful for building stage2. STAGE1_CFLAGS (via CFLAGS),
+# MAKEINFO and MAKEINFOFLAGS are explicitly passed here to make them
+# overrideable (for a bootstrap build stage1 also builds gcc.info).
+stage1_build:
+ $(MAKE) CC="$(CC)" libdir=$(libdir) LANGUAGES="$(BOOT_LANGUAGES)" \
+ CFLAGS="$(STAGE1_CFLAGS)" MAKEINFO="$(MAKEINFO)" \
+ MAKEINFOFLAGS="$(MAKEINFOFLAGS)"
+ $(STAMP) stage1_build
+ echo stage1_build > stage_last
+
+stage1_copy: stage1_build
$(MAKE) stage1
- touch stage_b
-
-# This used to define ALLOCA as empty, but that would lead to bad results
-# for a subsequent `make install' since that would not have ALLOCA empty.
-# To prevent `make install' from compiling alloca.o and then relinking cc1
-# because alloca.o is newer, we permit these recursive makes to compile
-# alloca.o. Then cc1 is newer, so it won't have to be relinked.
-stage_c: stage_b
- +$(MAKE) CC="stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" \
+ $(STAMP) stage1_copy
+ echo stage2_build > stage_last
+
+stage2_build: stage1_copy
+ $(MAKE) CC="stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" \
STAGE_PREFIX=stage1/ \
$(STAGE2_FLAGS_TO_PASS)
- touch stage_c
+ $(STAMP) stage2_build
+ echo stage2_build > stage_last
-stage_d: stage_c
- +$(MAKE) stage2
- touch stage_d
+stage2_copy: stage2_build
+ $(MAKE) stage2
+ $(STAMP) stage2_copy
+ echo stage3_build > stage_last
-stage_e: stage_d
- +$(MAKE) CC="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" \
+stage3_build: stage2_copy
+ $(MAKE) CC="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" \
STAGE_PREFIX=stage2/ \
$(STAGE2_FLAGS_TO_PASS)
- touch stage_e
+ $(STAMP) stage3_build
+ echo stage3_build > stage_last
# For bootstrap4:
-stage_f: stage_e
- +$(MAKE) CC="stage3/xgcc$(exeext) -B$(build_tooldir)/bin/ -Bstage3/" \
+stage3_copy: stage3_build
+ $(MAKE) stage3
+ $(STAMP) stage3_copy
+ echo stage4_build > stage_last
+
+stage4_build: stage3_copy
+ $(MAKE) CC="stage3/xgcc$(exeext) -Bstage3/ -B$(build_tooldir)/bin/" \
STAGE_PREFIX=stage3/ \
$(STAGE2_FLAGS_TO_PASS)
- touch stage_f
+ $(STAMP) stage4_build
+ echo stage4_build > stage_last
# Additional steps for *-lean targets:
-clean_s1: stage_b
+clean_s1: stage1_copy
-(cd stage1 && rm -f $(VOL_FILES))
- touch clean_s1
+ $(STAMP) clean_s1
-clean_s2: stage_d
+clean_s2: stage2_copy
-rm -rf stage1
- touch clean_s2
-
-# This next little bit is the way it is for parallel builds. It's simply
-# a chain of stages which DO have to be done sequentially.
-
-bootstrap_a: stage_a
-bootstrap_b: bootstrap_a stage_b
-bootstrap_c: bootstrap_b stage_c
-bootstrap_d: bootstrap_c stage_d
-bootstrap_e: bootstrap_d stage_e
-bootstrap: force bootstrap_e
-
-bootstrap-lean_a: stage_a
-bootstrap-lean_b: bootstrap-lean_a stage_b
-bootstrap-lean_c: bootstrap-lean_b clean_s1
-bootstrap-lean_d: bootstrap-lean_c stage_c
-bootstrap-lean_e: bootstrap-lean_d stage_d
-bootstrap-lean_f: bootstrap-lean_e clean_s2
-bootstrap-lean_g: bootstrap-lean_f stage_e
-bootstrap-lean: force bootstrap-lean_g
-
-bootstrap2_c: stage_c
-bootstrap2_d: bootstrap2_c stage_d
-bootstrap2_e: bootstrap2_d stage_e
-bootstrap2: force bootstrap2_e
-
-bootstrap2-lean_c: stage_c
-bootstrap2-lean_d: bootstrap2-lean_c stage_d
-bootstrap2-lean_e: bootstrap2-lean_d clean_s2
-bootstrap2-lean_f: bootstrap2-lean_e stage_e
-bootstrap2-lean: force bootstrap2-lean_f
-
-bootstrap3 bootstrap3-lean: force stage_e
-
-bootstrap4 bootstrap4-lean: force stage_f
+ $(STAMP) clean_s2
+
+# The various entry points for bootstrapping.
+
+bootstrap: stage3_build
+ @echo
+ @echo Bootstrap complete - make \"quickstrap\" to redo last build,
+ @echo \"restage1\" through \"restage3\" to rebuild specific stages,
+ @echo or \"cleanstrap\" to redo the bootstrap from scratch.
+
+bootstrap-lean : clean_s1 clean_s2 stage3_build
+ @echo
+ @echo Bootstrap complete - make \"quickstrap\" to redo last build,
+ @echo or \"cleanstrap\" to redo the bootstrap from scratch.
+
+bootstrap2: bootstrap
+
+bootstrap2-lean : bootstrap-lean
+
+bootstrap3 bootstrap3-lean: bootstrap
+
+bootstrap4 bootstrap4-lean: stage4_build
+
+unstage1 unstage2 unstage3 unstage4:
+ -set -vx; stage=`echo $@ | sed -e 's/un//'`; \
+ if test -d $$stage; then \
+ mv $$stage/* . 2>/dev/null; \
+ for i in `cd $$stage; echo *` ; do \
+ if test -d $$stage/$$i; then \
+ mv $$stage/$$i/* $$i/. 2>/dev/null; \
+ else \
+ mv $$stage/$$i .; \
+ fi \
+ done \
+ fi ; \
+ rm -f $${stage}_build $${stage}_copy ;\
+ echo $${stage}_build > stage_last
+
+restage1: unstage1
+ $(MAKE) stage1_build
+
+restage2: unstage2
+ $(MAKE) LANGUAGES="$(LANGUAGES)" stage2_build
+
+restage3: unstage3
+ $(MAKE) LANGUAGES="$(LANGUAGES)" stage3_build
+
+restage4: unstage4
+ $(MAKE) LANGUAGES="$(LANGUAGES)" stage4_build
+
+bubblestrap:
+ if test -f stage3_build; then true; else \
+ echo; echo You must \"make bootstrap\" first.; \
+ exit 1; \
+ fi
+ for i in stage3 \
+ unstage1 stage1_build stage1_copy \
+ unstage2 stage2_build stage2_copy \
+ unstage3 stage3_build ; \
+ do \
+ $(MAKE) LANGUAGES="$(LANGUAGES)" $$i || exit 1 ; \
+ done
+
+quickstrap:
+ if test -f stage_last ; then \
+ LAST=`cat stage_last`; rm $$LAST; $(MAKE) LANGUAGES="$(LANGUAGES)" $$LAST; \
+ else \
+ $(MAKE) stage1_build; \
+ fi
+
+cleanstrap:
+ -$(MAKE) clean
+ $(MAKE) LANGUAGES="$(LANGUAGES)" bootstrap
# Compare the object files in the current directory with those in the
# stage2 directory.