# Makefile for GNU Compiler Collection
# Run 'configure' to generate Makefile from Makefile.in
-# Copyright (C) 1987-2014 Free Software Foundation, Inc.
+# Copyright (C) 1987-2015 Free Software Foundation, Inc.
#This file is part of GCC.
target=@target@
target_noncanonical:=@target_noncanonical@
+# Normally identical to target_noncanonical, except for compilers built
+# as accelerator targets.
+real_target_noncanonical:=@real_target_noncanonical@
+accel_dir_suffix = @accel_dir_suffix@
+
# Sed command to transform gcc to installed name.
program_transform_name := @program_transform_name@
# UNSORTED
# --------
+# Extra flags to pass to indicate cross compilation, which
+# might be used or tested by Make-lang fragments.
+CROSS=@CROSS@
+
# Variables that exist for you to override.
# See below for how to change them for certain systems.
libgcov-util.o-warn = -Wno-error
libgcov-driver-tool.o-warn = -Wno-error
libgcov-merge-tool.o-warn = -Wno-error
+gimple-match.o-warn = -Wno-unused
+generic-match.o-warn = -Wno-unused
+dfp.o-warn = -Wno-strict-aliasing
# All warnings have to be shut off in stage1 if the compiler used then
# isn't gcc; configure determines that. WARN_CFLAGS will be either
LINKER_FLAGS = $(CFLAGS)
endif
+# We don't want to compile the compilers with -fPIE, it make PCH fail.
+COMPILER += @NO_PIE_CFLAGS@
+
+# Link with -no-pie since we compile the compiler with -fno-PIE.
+LINKER += @NO_PIE_FLAG@
+
# Like LINKER, but use a mutex for serializing front end links.
ifeq (@DO_LINK_MUTEX@,true)
LLINKER = $(SHELL) $(srcdir)/lock-and-run.sh linkfe.lck $(LINKER)
$(shell expr $(range) + $(write_entries_to_file_split) - 1), $(1))" \
| tr ' ' '\012' >> $(2)))
+# The jit documentation looks better if built with sphinx, but can be
+# built with texinfo if sphinx is not available.
+# configure sets "doc_build_sys" to "sphinx" or "texinfo" accordingly
+doc_build_sys=@doc_build_sys@
+
# --------
# UNSORTED
# --------
ISLLIBS = @ISLLIBS@
ISLINC = @ISLINC@
-# How to find CLOOG
-CLOOGLIBS = @CLOOGLIBS@
-CLOOGINC = @CLOOGINC@
-
# Set to 'yes' if the LTO front end is enabled.
enable_lto = @enable_lto@
enable_host_shared = @enable_host_shared@
+enable_as_accelerator = @enable_as_accelerator@
+
CPPLIB = ../libcpp/libcpp.a
CPPINC = -I$(srcdir)/../libcpp/include
xm_defines=@xm_defines@
lang_checks=
lang_checks_parallelized=
-# Upper limit to which it is useful to parallelize this lang target.
-# It doesn't make sense to try e.g. 128 goals for small testsuites
-# like objc or go.
-check_gcc_parallelize=10000
lang_opt_files=@lang_opt_files@ $(srcdir)/c-family/c.opt $(srcdir)/common.opt
lang_specs_files=@lang_specs_files@
lang_tree_files=@lang_tree_files@
# --------
# Directory in which the compiler finds libraries etc.
-libsubdir = $(libdir)/gcc/$(target_noncanonical)/$(version)
+libsubdir = $(libdir)/gcc/$(real_target_noncanonical)/$(version)$(accel_dir_suffix)
# Directory in which the compiler finds executables
-libexecsubdir = $(libexecdir)/gcc/$(target_noncanonical)/$(version)
+libexecsubdir = $(libexecdir)/gcc/$(real_target_noncanonical)/$(version)$(accel_dir_suffix)
# Directory in which all plugin resources are installed
plugin_resourcesdir = $(libsubdir)/plugin
# Directory in which plugin headers are installed
# Directory in which plugin specific executables are installed
plugin_bindir = $(libexecsubdir)/plugin
# Used to produce a relative $(gcc_tooldir) in gcc.o
+ifeq ($(enable_as_accelerator),yes)
+unlibsubdir = ../../../../..
+else
unlibsubdir = ../../..
+endif
# $(prefix), expressed as a path relative to $(libsubdir).
#
# An explanation of the sed strings:
CXX_FOR_BUILD = @CXX_FOR_BUILD@
BUILD_CFLAGS= @BUILD_CFLAGS@ -DGENERATOR_FILE
BUILD_CXXFLAGS = @BUILD_CXXFLAGS@ -DGENERATOR_FILE
+BUILD_CFLAGS += @NO_PIE_CFLAGS@
+BUILD_CXXFLAGS += @NO_PIE_CFLAGS@
# Native compiler that we use. This may be C++ some day.
COMPILER_FOR_BUILD = $(CXX_FOR_BUILD)
# Native linker and preprocessor flags. For x-fragment overrides.
BUILD_LDFLAGS=@BUILD_LDFLAGS@
+BUILD_LDFLAGS += @NO_PIE_FLAG@
BUILD_CPPFLAGS= -I. -I$(@D) -I$(srcdir) -I$(srcdir)/$(@D) \
-I$(srcdir)/../include @INCINTL@ $(CPPINC) $(CPPFLAGS)
version := $(BASEVER_c)
+PATCHLEVEL_c := \
+ $(shell echo $(BASEVER_c) | sed -e 's/^[0-9]*\.[0-9]*\.\([0-9]*\)$$/\1/')
+
+
# For use in version.c - double quoted strings, with appropriate
# surrounding punctuation and spaces, and with the datestamp and
# development phase collapsed to the empty string in release mode
-# (i.e. if DEVPHASE_c is empty). The space immediately after the
-# comma in the $(if ...) constructs is significant - do not remove it.
+# (i.e. if DEVPHASE_c is empty and PATCHLEVEL_c is 0). The space
+# immediately after the comma in the $(if ...) constructs is
+# significant - do not remove it.
BASEVER_s := "\"$(BASEVER_c)\""
DEVPHASE_s := "\"$(if $(DEVPHASE_c), ($(DEVPHASE_c)))\""
-DATESTAMP_s := "\"$(if $(DEVPHASE_c), $(DATESTAMP_c))\""
+DATESTAMP_s := \
+ "\"$(if $(DEVPHASE_c)$(filter-out 0,$(PATCHLEVEL_c)), $(DATESTAMP_c))\""
PKGVERSION_s:= "\"@PKGVERSION@\""
BUGURL_s := "\"@REPORT_BUGS_TO@\""
BUGURL_TEXI := @REPORT_BUGS_TEXI@
ifdef REVISION_c
-REVISION_s := "\"$(if $(DEVPHASE_c), $(REVISION_c))\""
+REVISION_s := \
+ "\"$(if $(DEVPHASE_c)$(filter-out 0,$(PATCHLEVEL_c)), $(REVISION_c))\""
else
REVISION_s := "\"\""
endif
VEC_H = vec.h statistics.h $(GGC_H)
HASH_TABLE_H = $(HASHTAB_H) hash-table.h
EXCEPT_H = except.h $(HASHTAB_H)
-TARGET_DEF = target.def target-hooks-macros.h
+TARGET_DEF = target.def target-hooks-macros.h target-insns.def
C_TARGET_DEF = c-family/c-target.def target-hooks-macros.h
COMMON_TARGET_DEF = common/common-target.def target-hooks-macros.h
TARGET_H = $(TM_H) target.h $(TARGET_DEF) insn-modes.h insn-codes.h
$(BITMAP_H) sbitmap.h $(BASIC_BLOCK_H) $(GIMPLE_H) \
$(HASHTAB_H) $(CGRAPH_H) $(IPA_REFERENCE_H) \
tree-ssa-alias.h
-PRETTY_PRINT_H = pretty-print.h $(INPUT_H) $(OBSTACK_H)
+PRETTY_PRINT_H = pretty-print.h $(INPUT_H) $(OBSTACK_H) wide-int-print.h
TREE_PRETTY_PRINT_H = tree-pretty-print.h $(PRETTY_PRINT_H)
GIMPLE_PRETTY_PRINT_H = gimple-pretty-print.h $(TREE_PRETTY_PRINT_H)
DIAGNOSTIC_CORE_H = diagnostic-core.h $(INPUT_H) bversion.h diagnostic.def
# and the system's installed libraries.
LIBS = @LIBS@ libcommon.a $(CPPLIB) $(LIBINTL) $(LIBICONV) $(LIBBACKTRACE) \
$(LIBIBERTY) $(LIBDECNUMBER) $(HOST_LIBS)
-BACKENDLIBS = $(CLOOGLIBS) $(ISLLIBS) $(GMPLIBS) $(PLUGINLIBS) $(HOST_LIBS) \
+BACKENDLIBS = $(ISLLIBS) $(GMPLIBS) $(PLUGINLIBS) $(HOST_LIBS) \
$(ZLIB)
# Any system libraries needed just for GNAT.
SYSLIBS = @GNAT_LIBEXC@
BUILD_RTL = build/rtl.o build/read-rtl.o build/ggc-none.o \
build/vec.o build/min-insn-modes.o build/gensupport.o \
- build/print-rtl.o
+ build/print-rtl.o build/hash-table.o
BUILD_MD = build/read-md.o
BUILD_ERRORS = build/errors.o
INCLUDES = -I. -I$(@D) -I$(srcdir) -I$(srcdir)/$(@D) \
-I$(srcdir)/../include @INCINTL@ \
$(CPPINC) $(GMPINC) $(DECNUMINC) $(BACKTRACEINC) \
- $(CLOOGINC) $(ISLINC)
+ $(ISLINC)
COMPILE.base = $(COMPILER) -c $(ALL_COMPILERFLAGS) $(ALL_CPPFLAGS) -o $@
ifeq ($(CXXDEPMODE),depmode=gcc3)
FORTRAN_TARGET_OBJS=@fortran_target_objs@
# Object files for gcc many-languages driver.
-GCC_OBJS = gcc.o ggc-none.o
+GCC_OBJS = gcc.o gcc-main.o ggc-none.o
c-family-warn = $(STRICT_WARN)
# Language-specific object files shared by all C-family front ends.
C_COMMON_OBJS = c-family/c-common.o c-family/c-cppbuiltin.o c-family/c-dump.o \
- c-family/c-format.o c-family/c-gimplify.o c-family/c-lex.o \
- c-family/c-omp.o c-family/c-opts.o c-family/c-pch.o \
+ c-family/c-format.o c-family/c-gimplify.o c-family/c-indentation.o \
+ c-family/c-lex.o c-family/c-omp.o c-family/c-opts.o c-family/c-pch.o \
c-family/c-ppoutput.o c-family/c-pragma.o c-family/c-pretty-print.o \
c-family/c-semantics.o c-family/c-ada-spec.o \
c-family/c-cilkplus.o \
alias.o \
alloc-pool.o \
auto-inc-dec.o \
+ auto-profile.o \
bb-reorder.o \
bitmap.o \
bt-load.o \
builtins.o \
caller-save.o \
calls.o \
+ ccmp.o \
cfg.o \
cfganal.o \
cfgbuild.o \
function.o \
fwprop.o \
gcse.o \
+ gcse-common.o \
ggc-common.o \
gimple.o \
gimple-builder.o \
gimple-iterator.o \
gimple-fold.o \
gimple-low.o \
+ gimple-match.o \
+ generic-match.o \
gimple-pretty-print.o \
gimple-ssa-isolate-paths.o \
gimple-ssa-strength-reduction.o \
graphds.o \
graphite.o \
graphite-blocking.o \
- graphite-clast-to-gimple.o \
graphite-isl-ast-to-gimple.o \
graphite-dependences.o \
graphite-interchange.o \
incpath.o \
init-regs.o \
internal-fn.o \
+ ipa-chkp.o \
ipa-cp.o \
ipa-devirt.o \
ipa-polymorphic-call.o \
ipa-profile.o \
ipa-prop.o \
ipa-pure-const.o \
+ ipa-icf.o \
+ ipa-icf-gimple.o \
ipa-reference.o \
ipa-ref.o \
ipa-utils.o \
lra-constraints.o \
lra-eliminations.o \
lra-lives.o \
+ lra-remat.o \
lra-spills.o \
lto-cgraph.o \
lto-streamer.o \
reload1.o \
reorg.o \
resource.o \
+ rtl-chkp.o \
rtl-error.o \
rtl.o \
rtlhash.o \
asan.o \
tsan.o \
ubsan.o \
+ sanopt.o \
tree-call-cdce.o \
tree-cfg.o \
tree-cfgcleanup.o \
tree-outof-ssa.o \
tree-parloops.o \
tree-phinodes.o \
+ tree-chkp.o \
+ tree-chkp-opt.o \
tree-predcom.o \
tree-pretty-print.o \
tree-profile.o \
tree-ssa-propagate.o \
tree-ssa-reassoc.o \
tree-ssa-sccvn.o \
+ tree-ssa-scopedtables.o \
tree-ssa-sink.o \
tree-ssa-strlen.o \
tree-ssa-structalias.o \
# Objects in libcommon.a, potentially used by all host binaries and with
# no target dependencies.
OBJS-libcommon = diagnostic.o diagnostic-color.o pretty-print.o intl.o \
- vec.o input.o version.o
+ vec.o input.o version.o hash-table.o ggc-none.o
# Objects in libcommon-target.a, used by drivers and by the core
# compiler and containing target-dependent code.
ALL_HOST_BACKEND_OBJS = $(GCC_OBJS) $(OBJS) $(OBJS-libcommon) \
$(OBJS-libcommon-target) @TREEBROWSER@ main.o c-family/cppspec.o \
$(COLLECT2_OBJS) $(EXTRA_GCC_OBJS) $(GCOV_OBJS) $(GCOV_DUMP_OBJS) \
- $(GCOV_TOOL_OBJS) lto-wrapper.o collect-utils.o
+ $(GCOV_TOOL_OBJS) $(GENGTYPE_OBJS) gcc-ar.o gcc-nm.o gcc-ranlib.o \
+ lto-wrapper.o collect-utils.o
# This lists all host object files, whether they are included in this
# compilation or not.
# front-end checking.
TREECHECKING = @TREECHECKING@
+# The full name of the driver on installation
+FULL_DRIVER_NAME=$(target_noncanonical)-gcc-$(version)$(exeext)
+
MOSTLYCLEANFILES = insn-flags.h insn-config.h insn-codes.h \
insn-output.c insn-recog.c insn-emit.c insn-extract.c insn-peep.c \
insn-attr.h insn-attr-common.h insn-attrtab.c insn-dfatab.c \
insn-latencytab.c insn-opinit.c insn-opinit.h insn-preds.c insn-constants.h \
- tm-preds.h tm-constrs.h checksum-options \
+ tm-preds.h tm-constrs.h checksum-options gimple-match.c generic-match.c \
tree-check.h min-insn-modes.c insn-modes.c insn-modes.h \
genrtl.h gt-*.h gtype-*.h gtype-desc.c gtyp-input.list \
- xgcc$(exeext) cpp$(exeext) \
+ xgcc$(exeext) cpp$(exeext) $(FULL_DRIVER_NAME) \
$(EXTRA_PROGRAMS) gcc-cross$(exeext) \
$(SPECS) collect2$(exeext) gcc-ar$(exeext) gcc-nm$(exeext) \
gcc-ranlib$(exeext) \
gengtype$(exeext) *.[0-9][0-9].* *.[si] *-checksum.c libbackend.a \
libcommon-target.a libcommon.a libgcc.mk
+# This symlink makes the full installation name of the driver be available
+# from within the *build* directory, for use when running the JIT library
+# from there (e.g. when running its testsuite).
+$(FULL_DRIVER_NAME): ./xgcc
+ rm -f $@
+ $(LN_S) $< $@
+
#\f
# Language makefile fragments.
$(srcdir)/../config/codeset.m4 \
$(srcdir)/../config/extensions.m4 \
$(srcdir)/../config/gettext-sister.m4 \
+ $(srcdir)/../config/gcc-plugin.m4 \
$(srcdir)/../config/iconv.m4 \
$(srcdir)/../config/lcmessage.m4 \
$(srcdir)/../config/lib-ld.m4 \
echo GCC_CFLAGS = '$(GCC_CFLAGS)' >> tmp-libgcc.mvars
echo INHIBIT_LIBC_CFLAGS = '$(INHIBIT_LIBC_CFLAGS)' >> tmp-libgcc.mvars
echo TARGET_SYSTEM_ROOT = '$(TARGET_SYSTEM_ROOT)' >> tmp-libgcc.mvars
+ if test @enable_default_pie@ = yes; then \
+ NO_PIE_CFLAGS="-fno-PIE"; \
+ else \
+ NO_PIE_CFLAGS=; \
+ fi; \
+ echo NO_PIE_CFLAGS = "$$NO_PIE_CFLAGS" >> tmp-libgcc.mvars
mv tmp-libgcc.mvars libgcc.mvars
cp $^ $@
COLLECT2_OBJS = collect2.o collect2-aix.o tlink.o vec.o ggc-none.o \
- collect-utils.o file-find.o
+ collect-utils.o file-find.o hash-table.o
COLLECT2_LIBS = @COLLECT2_LIBS@
collect2$(exeext): $(COLLECT2_OBJS) $(LIBDEPS)
# Don't try modifying collect2 (aka ld) in place--it might be linking this.
-DSTANDARD_EXEC_PREFIX=\"$(libdir)/gcc/\" \
-DSTANDARD_LIBEXEC_PREFIX=\"$(libexecdir)/gcc/\" \
-DDEFAULT_TARGET_VERSION=\"$(version)\" \
+ -DDEFAULT_REAL_TARGET_MACHINE=\"$(real_target_noncanonical)\" \
-DDEFAULT_TARGET_MACHINE=\"$(target_noncanonical)\" \
-DSTANDARD_BINDIR_PREFIX=\"$(bindir)/\" \
-DTOOLDIR_BASE_PREFIX=\"$(libsubdir_to_prefix)$(prefix_to_exec_prefix)\" \
+ -DACCEL_DIR_SUFFIX=\"$(accel_dir_suffix)\" \
@TARGET_SYSTEM_ROOT_DEFINE@ \
$(VALGRIND_DRIVER_DEFINES) \
$(if $(SHLIB),$(if $(filter yes,@enable_shared@),-DENABLE_SHARED_LIBGCC)) \
.PRECIOUS: insn-config.h insn-flags.h insn-codes.h insn-constants.h \
insn-emit.c insn-recog.c insn-extract.c insn-output.c insn-peep.c \
insn-attr.h insn-attr-common.h insn-attrtab.c insn-dfatab.c \
- insn-latencytab.c insn-preds.c
+ insn-latencytab.c insn-preds.c gimple-match.c generic-match.c \
+ insn-target-def.h
# Dependencies for the md file. The first time through, we just assume
# the md file itself and the generated dependency file (in order to get
# the target file.
simple_rtl_generated_h = insn-attr.h insn-attr-common.h insn-codes.h \
- insn-config.h insn-flags.h
+ insn-config.h insn-flags.h insn-target-def.h
simple_rtl_generated_c = insn-automata.c insn-emit.c \
insn-extract.c insn-output.c \
false; \
fi
+gimple-match.c: s-match gimple-match-head.c ; @true
+generic-match.c: s-match generic-match-head.c ; @true
+
+s-match: build/genmatch$(build_exeext) $(srcdir)/match.pd
+ $(RUN_GEN) build/genmatch$(build_exeext) --gimple $(srcdir)/match.pd \
+ > tmp-gimple-match.c
+ $(RUN_GEN) build/genmatch$(build_exeext) --generic $(srcdir)/match.pd \
+ > tmp-generic-match.c
+ $(SHELL) $(srcdir)/../move-if-change tmp-gimple-match.c \
+ gimple-match.c
+ $(SHELL) $(srcdir)/../move-if-change tmp-generic-match.c \
+ generic-match.c
+ $(STAMP) s-match
+
GTFILES = $(CPP_ID_DATA_H) $(srcdir)/input.h $(srcdir)/coretypes.h \
$(host_xm_file_list) \
$(tm_file_list) $(HASHTAB_H) $(SPLAY_TREE_H) $(srcdir)/bitmap.h \
$(srcdir)/libfuncs.h $(SYMTAB_H) \
$(srcdir)/real.h $(srcdir)/function.h $(srcdir)/insn-addr.h $(srcdir)/hwint.h \
$(srcdir)/fixed-value.h \
- $(srcdir)/output.h $(srcdir)/cfgloop.h \
+ $(srcdir)/output.h $(srcdir)/cfgloop.h $(srcdir)/cfg.h \
$(srcdir)/cselib.h $(srcdir)/basic-block.h $(srcdir)/ipa-ref.h $(srcdir)/cgraph.h \
$(srcdir)/reload.h $(srcdir)/caller-save.c $(srcdir)/symtab.c \
$(srcdir)/alias.c $(srcdir)/bitmap.c $(srcdir)/cselib.c $(srcdir)/cgraph.c \
$(srcdir)/dwarf2cfi.c \
$(srcdir)/dwarf2out.c \
$(srcdir)/tree-vect-generic.c \
- $(srcdir)/dojump.c \
+ $(srcdir)/dojump.c $(srcdir)/emit-rtl.h \
$(srcdir)/emit-rtl.c $(srcdir)/except.h $(srcdir)/explow.c $(srcdir)/expr.c \
$(srcdir)/expr.h \
$(srcdir)/function.c $(srcdir)/except.c \
$(srcdir)/stringpool.c $(srcdir)/tree.c $(srcdir)/varasm.c \
$(srcdir)/gimple.h \
$(srcdir)/gimple-ssa.h \
+ $(srcdir)/tree-chkp.c \
$(srcdir)/tree-ssanames.c $(srcdir)/tree-eh.c $(srcdir)/tree-ssa-address.c \
$(srcdir)/tree-cfg.c \
$(srcdir)/tree-dfa.c \
$(srcdir)/tree-scalar-evolution.c \
$(srcdir)/tree-ssa-operands.h \
$(srcdir)/tree-profile.c $(srcdir)/tree-nested.c \
- $(srcdir)/tree-parloops.c \
$(srcdir)/omp-low.c \
+ $(srcdir)/omp-low.h \
$(srcdir)/targhooks.c $(out_file) $(srcdir)/passes.c $(srcdir)/cgraphunit.c \
$(srcdir)/cgraphclones.c \
$(srcdir)/tree-phinodes.c \
$(srcdir)/asan.c \
$(srcdir)/ubsan.c \
$(srcdir)/tsan.c \
+ $(srcdir)/sanopt.c \
$(srcdir)/ipa-devirt.c \
$(srcdir)/internal-fn.h \
@all_gtfiles@
$(RTL_H) $(GGC_H) errors.h
build/vec.o : vec.c $(BCONFIG_H) $(SYSTEM_H) coretypes.h $(VEC_H) \
$(GGC_H) toplev.h $(DIAGNOSTIC_CORE_H)
+build/hash-table.o : hash-table.c $(BCONFIG_H) $(SYSTEM_H) coretypes.h \
+ $(HASH_TABLE_H) $(GGC_H) toplev.h $(DIAGNOSTIC_CORE_H)
+build/inchash.o : inchash.c $(BCONFIG_H) $(SYSTEM_H) coretypes.h \
+ $(HASHTAB_H) inchash.h
build/gencondmd.o : build/gencondmd.c $(BCONFIG_H) $(SYSTEM_H) \
coretypes.h $(GTM_H) insn-constants.h \
$(filter-out insn-flags.h, $(RTL_H) $(TM_P_H) $(FUNCTION_H) $(REGS_H) \
$(SYSTEM_H) coretypes.h $(GTM_H) errors.h $(READ_MD_H) gensupport.h
build/genflags.o : genflags.c $(RTL_BASE_H) $(OBSTACK_H) $(BCONFIG_H) \
$(SYSTEM_H) coretypes.h $(GTM_H) errors.h $(READ_MD_H) gensupport.h
+build/gentarget-def.o : gentarget-def.c $(BCONFIG_H) $(SYSTEM_H) \
+ coretypes.h $(GTM_H) $(RTL_BASE_H) errors.h $(READ_MD_H) gensupport.h \
+ $(HASH_TABLE_H) target-insns.def
build/gengenrtl.o : gengenrtl.c $(BCONFIG_H) $(SYSTEM_H) rtl.def
# The gengtype generator program is special: Two versions are built.
# on BCONFIG_H. For the build objects, add -DGENERATOR_FILE manually,
# the build-%: rule doesn't apply to them.
+GENGTYPE_OBJS = gengtype.o gengtype-parse.o gengtype-state.o \
+ gengtype-lex.o errors.o
+
gengtype-lex.o build/gengtype-lex.o : gengtype-lex.c gengtype.h $(SYSTEM_H)
-gengtype-lex.o: $(CONFIG_H) $(BCONFIG_H)
-CFLAGS-gengtype-lex.o += -DGENERATOR_FILE
+CFLAGS-gengtype-lex.o += -DHOST_GENERATOR_FILE
build/gengtype-lex.o: $(BCONFIG_H)
gengtype-parse.o build/gengtype-parse.o : gengtype-parse.c gengtype.h \
$(SYSTEM_H)
-gengtype-parse.o: $(CONFIG_H)
-CFLAGS-gengtype-parse.o += -DGENERATOR_FILE
+CFLAGS-gengtype-parse.o += -DHOST_GENERATOR_FILE
build/gengtype-parse.o: $(BCONFIG_H)
gengtype-state.o build/gengtype-state.o: gengtype-state.c $(SYSTEM_H) \
gengtype.h errors.h double-int.h version.h $(HASHTAB_H) $(OBSTACK_H) \
$(XREGEX_H)
-gengtype-state.o: $(CONFIG_H)
-CFLAGS-gengtype-state.o += -DGENERATOR_FILE
+CFLAGS-gengtype-state.o += -DHOST_GENERATOR_FILE
build/gengtype-state.o: $(BCONFIG_H)
gengtype.o build/gengtype.o : gengtype.c $(SYSTEM_H) gengtype.h \
rtl.def insn-notes.def errors.h double-int.h version.h \
$(HASHTAB_H) $(OBSTACK_H) $(XREGEX_H)
-gengtype.o: $(CONFIG_H)
-CFLAGS-gengtype.o += -DGENERATOR_FILE
+CFLAGS-gengtype.o += -DHOST_GENERATOR_FILE
build/gengtype.o: $(BCONFIG_H)
+CFLAGS-errors.o += -DHOST_GENERATOR_FILE
+
build/genmddeps.o: genmddeps.c $(BCONFIG_H) $(SYSTEM_H) coretypes.h \
errors.h $(READ_MD_H)
build/genmodes.o : genmodes.c $(BCONFIG_H) $(SYSTEM_H) errors.h \
build/genpreds.o : genpreds.c $(RTL_BASE_H) $(BCONFIG_H) $(SYSTEM_H) \
coretypes.h $(GTM_H) errors.h $(READ_MD_H) gensupport.h $(OBSTACK_H)
build/genrecog.o : genrecog.c $(RTL_BASE_H) $(BCONFIG_H) $(SYSTEM_H) \
- coretypes.h $(GTM_H) errors.h $(READ_MD_H) gensupport.h
+ coretypes.h $(GTM_H) errors.h $(READ_MD_H) gensupport.h \
+ $(HASH_TABLE_H) inchash.h
build/genhooks.o : genhooks.c $(TARGET_DEF) $(C_TARGET_DEF) \
$(COMMON_TARGET_DEF) $(BCONFIG_H) $(SYSTEM_H) errors.h
build/genmddump.o : genmddump.c $(RTL_BASE_H) $(BCONFIG_H) $(SYSTEM_H) \
coretypes.h $(GTM_H) errors.h $(READ_MD_H) gensupport.h
+build/genmatch.o : genmatch.c $(BCONFIG_H) $(SYSTEM_H) \
+ coretypes.h errors.h $(HASH_TABLE_H) hash-map.h $(GGC_H)
# Compile the programs that generate insn-* from the machine description.
# They are compiled with $(COMPILER_FOR_BUILD), and associated libraries,
# All these programs use the RTL reader ($(BUILD_RTL)).
genprogrtl = attr attr-common attrtab automata codes conditions config emit \
- extract flags opinit output peep preds recog mddump
+ extract flags mddump opinit output peep preds recog target-def
$(genprogrtl:%=build/gen%$(build_exeext)): $(BUILD_RTL)
# All these programs use the MD reader ($(BUILD_MD)).
$(genprogerr:%=build/gen%$(build_exeext)): $(BUILD_ERRORS)
# Remaining build programs.
-genprog = $(genprogerr) check checksum condmd
+genprog = $(genprogerr) check checksum condmd match
# These programs need libs over and above what they get from the above list.
build/genautomata$(build_exeext) : BUILD_LIBS += -lm
+build/genrecog$(build_exeext) : build/hash-table.o build/inchash.o
+
+# For stage1 and when cross-compiling use the build libcpp which is
+# built with NLS disabled. For stage2+ use the host library and
+# its dependencies.
+ifeq ($(build_objdir),$(build_libobjdir))
+BUILD_CPPLIB = $(build_libobjdir)/libcpp/libcpp.a
+else
+BUILD_CPPLIB = $(CPPLIB) $(LIBIBERTY)
+build/genmatch$(build_exeext): BUILD_LIBDEPS += $(LIBINTL_DEP) $(LIBICONV_DEP)
+build/genmatch$(build_exeext): BUILD_LIBS += $(LIBINTL) $(LIBICONV)
+endif
+
+build/genmatch$(build_exeext) : $(BUILD_CPPLIB) \
+ $(BUILD_ERRORS) build/vec.o build/hash-table.o
+
# These programs are not linked with the MD reader.
build/gengtype$(build_exeext) : build/gengtype-lex.o build/gengtype-parse.o \
build/gengtype-state.o build/version.o build/errors.o
GCOV_OBJS = gcov.o
gcov$(exeext): $(GCOV_OBJS) $(LIBDEPS)
- +$(LINKER) $(ALL_LINKERFLAGS) $(LDFLAGS) $(GCOV_OBJS) $(LIBS) -o $@
+ +$(LINKER) $(ALL_LINKERFLAGS) $(LDFLAGS) $(GCOV_OBJS) \
+ hash-table.o ggc-none.o $(LIBS) -o $@
GCOV_DUMP_OBJS = gcov-dump.o
gcov-dump$(exeext): $(GCOV_DUMP_OBJS) $(LIBDEPS)
+$(LINKER) $(ALL_LINKERFLAGS) $(LDFLAGS) $(GCOV_DUMP_OBJS) \
+ hash-table.o ggc-none.o\
$(LIBS) -o $@
GCOV_TOOL_DEP_FILES = $(srcdir)/../libgcc/libgcov-util.c gcov-io.c $(GCOV_IO_H) \
$(srcdir)/../libgcc/libgcov-driver.c $(srcdir)/../libgcc/libgcov-driver-system.c \
- $(srcdir)/../libgcc/libgcov-merge.c \
+ $(srcdir)/../libgcc/libgcov-merge.c $(srcdir)/../libgcc/libgcov.h \
$(SYSTEM_H) coretypes.h $(TM_H) $(CONFIG_H) version.h intl.h $(DIAGNOSTIC_H)
libgcov-util.o: $(srcdir)/../libgcc/libgcov-util.c $(GCOV_TOOL_DEP_FILES)
+$(COMPILER) -c $(ALL_COMPILERFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -o $@ $<
gcov.texi trouble.texi bugreport.texi service.texi \
contribute.texi compat.texi funding.texi gnu.texi gpl_v3.texi \
fdl.texi contrib.texi cppenv.texi cppopts.texi avr-mmcu.texi \
- implement-c.texi implement-cxx.texi arm-neon-intrinsics.texi \
- arm-acle-intrinsics.texi aarch64-acle-intrinsics.texi \
- gcov-tool.texi
+ implement-c.texi implement-cxx.texi gcov-tool.texi
# we explicitly use $(srcdir)/doc/tm.texi here to avoid confusion with
# the generated tm.texi; the latter might have a more recent timestamp,
configfiles.texi collect2.texi headerdirs.texi funding.texi \
gnu.texi gpl_v3.texi fdl.texi contrib.texi languages.texi \
sourcebuild.texi gty.texi libgcc.texi cfg.texi tree-ssa.texi \
- loop.texi generic.texi gimple.texi plugins.texi optinfo.texi
+ loop.texi generic.texi gimple.texi plugins.texi optinfo.texi \
+ match-and-simplify.texi
TEXI_GCCINSTALL_FILES = install.texi install-old.texi fdl.texi \
gcc-common.texi gcc-vers.texi
# Handle cpp installation.
install-cpp: installdirs cpp$(exeext)
- -rm -f $(DESTDIR)$(bindir)/$(CPP_INSTALL_NAME)$(exeext)
- -$(INSTALL_PROGRAM) -m 755 cpp$(exeext) $(DESTDIR)$(bindir)/$(CPP_INSTALL_NAME)$(exeext)
- -if [ x$(cpp_install_dir) != x ]; then \
- rm -f $(DESTDIR)$(prefix)/$(cpp_install_dir)/$(CPP_INSTALL_NAME)$(exeext); \
- $(INSTALL_PROGRAM) -m 755 cpp$(exeext) $(DESTDIR)$(prefix)/$(cpp_install_dir)/$(CPP_INSTALL_NAME)$(exeext); \
- else true; fi
+ -if test "$(enable_as_accelerator)" != "yes" ; then \
+ rm -f $(DESTDIR)$(bindir)/$(CPP_INSTALL_NAME)$(exeext); \
+ $(INSTALL_PROGRAM) -m 755 cpp$(exeext) $(DESTDIR)$(bindir)/$(CPP_INSTALL_NAME)$(exeext); \
+ if [ x$(cpp_install_dir) != x ]; then \
+ rm -f $(DESTDIR)$(prefix)/$(cpp_install_dir)/$(CPP_INSTALL_NAME)$(exeext); \
+ $(INSTALL_PROGRAM) -m 755 cpp$(exeext) $(DESTDIR)$(prefix)/$(cpp_install_dir)/$(CPP_INSTALL_NAME)$(exeext); \
+ else true; fi; \
+ fi
# Create the installation directories.
# $(libdir)/gcc/include isn't currently searched by cpp.
tree-ssa-loop.h tree-ssa-loop-ivopts.h tree-ssa-loop-manip.h \
tree-ssa-loop-niter.h tree-ssa-ter.h tree-ssa-threadedge.h \
tree-ssa-threadupdate.h inchash.h wide-int.h signop.h hash-map.h \
- hash-set.h
+ hash-set.h dominance.h cfg.h cfgrtl.h cfganal.h cfgbuild.h cfgcleanup.h \
+ lcm.h cfgloopmanip.h builtins.def chkp-builtins.def pass-instances.def
# generate the 'build fragment' b-header-vars
s-header-vars: Makefile
# We keep the directory structure for files in config or c-family and .def
# files. All other files are flattened to a single directory.
$(mkinstalldirs) $(DESTDIR)$(plugin_includedir)
- headers=`echo $(PLUGIN_HEADERS) | tr ' ' '\012' | sort -u`; \
+ headers=`echo $(PLUGIN_HEADERS) $$(cd $(srcdir); echo *.h *.def) | tr ' ' '\012' | sort -u`; \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`; \
for file in $$headers; do \
if [ -f $$file ] ; then \
# otherwise override the specs built into the driver.
rm -f $(DESTDIR)$(libsubdir)/specs
# Install gcov if it was compiled.
- -if [ -f gcov$(exeext) ]; \
- then \
+ -if test "$(enable_as_accelerator)" != "yes" ; then \
+ if [ -f gcov$(exeext) ]; \
+ then \
rm -f $(DESTDIR)$(bindir)/$(GCOV_INSTALL_NAME)$(exeext); \
$(INSTALL_PROGRAM) gcov$(exeext) $(DESTDIR)$(bindir)/$(GCOV_INSTALL_NAME)$(exeext); \
+ fi; \
fi
# Install gcov-tool if it was compiled.
- -if [ -f gcov-tool$(exeext) ]; \
- then \
+ -if test "$(enable_as_accelerator)" != "yes" ; then \
+ if [ -f gcov-tool$(exeext) ]; \
+ then \
rm -f $(DESTDIR)$(bindir)/$(GCOV_TOOL_INSTALL_NAME)$(exeext); \
$(INSTALL_PROGRAM) \
gcov-tool$(exeext) $(DESTDIR)$(bindir)/$(GCOV_TOOL_INSTALL_NAME)$(exeext); \
+ fi; \
fi
# Install the driver program as $(target_noncanonical)-gcc,
install-driver: installdirs xgcc$(exeext)
-rm -f $(DESTDIR)$(bindir)/$(GCC_INSTALL_NAME)$(exeext)
-$(INSTALL_PROGRAM) xgcc$(exeext) $(DESTDIR)$(bindir)/$(GCC_INSTALL_NAME)$(exeext)
- -if [ "$(GCC_INSTALL_NAME)" != "$(target_noncanonical)-gcc-$(version)" ]; then \
- rm -f $(DESTDIR)$(bindir)/$(target_noncanonical)-gcc-$(version)$(exeext); \
- ( cd $(DESTDIR)$(bindir) && \
- $(LN) $(GCC_INSTALL_NAME)$(exeext) $(target_noncanonical)-gcc-$(version)$(exeext) ); \
- fi
- -if [ ! -f gcc-cross$(exeext) ] \
- && [ "$(GCC_INSTALL_NAME)" != "$(GCC_TARGET_INSTALL_NAME)" ]; then \
- rm -f $(DESTDIR)$(bindir)/$(target_noncanonical)-gcc-tmp$(exeext); \
- ( cd $(DESTDIR)$(bindir) && \
- $(LN) $(GCC_INSTALL_NAME)$(exeext) $(target_noncanonical)-gcc-tmp$(exeext) && \
- mv -f $(target_noncanonical)-gcc-tmp$(exeext) $(GCC_TARGET_INSTALL_NAME)$(exeext) ); \
+ -if test "$(enable_as_accelerator)" != "yes" ; then \
+ if [ "$(GCC_INSTALL_NAME)" != "$(target_noncanonical)-gcc-$(version)" ]; then \
+ rm -f $(DESTDIR)$(bindir)/$(FULL_DRIVER_NAME); \
+ ( cd $(DESTDIR)$(bindir) && \
+ $(LN) $(GCC_INSTALL_NAME)$(exeext) $(FULL_DRIVER_NAME) ); \
+ fi; \
+ if [ ! -f gcc-cross$(exeext) ] \
+ && [ "$(GCC_INSTALL_NAME)" != "$(GCC_TARGET_INSTALL_NAME)" ]; then \
+ rm -f $(DESTDIR)$(bindir)/$(target_noncanonical)-gcc-tmp$(exeext); \
+ ( cd $(DESTDIR)$(bindir) && \
+ $(LN) $(GCC_INSTALL_NAME)$(exeext) $(target_noncanonical)-gcc-tmp$(exeext) && \
+ mv -f $(target_noncanonical)-gcc-tmp$(exeext) $(GCC_TARGET_INSTALL_NAME)$(exeext) ); \
+ fi; \
fi
# Install the info files.
$(INSTALL_PROGRAM) lto-wrapper$(exeext) $(DESTDIR)$(libexecsubdir)/lto-wrapper$(exeext)
install-gcc-ar: installdirs gcc-ar$(exeext) gcc-nm$(exeext) gcc-ranlib$(exeext)
- for i in gcc-ar gcc-nm gcc-ranlib; do \
- install_name=`echo $$i|sed '$(program_transform_name)'` ;\
- target_install_name=$(target_noncanonical)-`echo $$i|sed '$(program_transform_name)'` ; \
- rm -f $(DESTDIR)$(bindir)/$$install_name$(exeext) ; \
- $(INSTALL_PROGRAM) $$i$(exeext) $(DESTDIR)$(bindir)/$$install_name$(exeext) ;\
- if test -f gcc-cross$(exeext); then \
- :; \
- else \
- rm -f $(DESTDIR)$(bindir)/$$target_install_name$(exeext); \
- ( cd $(DESTDIR)$(bindir) && \
- $(LN) $$install_name$(exeext) $$target_install_name$(exeext) ) ; \
- fi ; \
- done
+ if test "$(enable_as_accelerator)" != "yes" ; then \
+ for i in gcc-ar gcc-nm gcc-ranlib; do \
+ install_name=`echo $$i|sed '$(program_transform_name)'` ;\
+ target_install_name=$(target_noncanonical)-`echo $$i|sed '$(program_transform_name)'` ; \
+ rm -f $(DESTDIR)$(bindir)/$$install_name$(exeext) ; \
+ $(INSTALL_PROGRAM) $$i$(exeext) $(DESTDIR)$(bindir)/$$install_name$(exeext) ;\
+ if test -f gcc-cross$(exeext); then \
+ :; \
+ else \
+ rm -f $(DESTDIR)$(bindir)/$$target_install_name$(exeext); \
+ ( cd $(DESTDIR)$(bindir) && \
+ $(LN) $$install_name$(exeext) $$target_install_name$(exeext) ) ; \
+ fi ; \
+ done; \
+ fi
# Cancel installation by deleting the installed files.
uninstall: lang.uninstall
echo "set PLUGINCFLAGS \"$(PLUGINCFLAGS)\"" >> ./site.tmp; \
echo "set GMPINC \"$(GMPINC)\"" >> ./site.tmp; \
fi
- @if test "@enable_lto@" = "yes" ; then \
- echo "set ENABLE_LTO 1" >> ./site.tmp; \
- fi
# If newlib has been configured, we need to pass -B to gcc so it can find
# newlib's crt0.o if it exists. This will cause a "path prefix not used"
# message if it doesn't, but the testsuite is supposed to ignore the message -
$(check_p_numbers)))
# For parallelized check-% targets, this decides whether parallelization
-# is desirable (if -jN is used and RUNTESTFLAGS doesn't contain anything
-# but optional --target_board or --extra_opts arguments). If desirable,
-# recursive make is run with check-parallel-$lang{,1,2,3,4,5} etc. goals,
-# which can be executed in parallel, as they are run in separate directories.
+# is desirable (if -jN is used). If desirable, recursive make is run with
+# check-parallel-$lang{,1,2,3,4,5} etc. goals, which can be executed in
+# parallel, as they are run in separate directories.
# check-parallel-$lang{,1,2,3,4,5} etc. goals invoke runtest with
# GCC_RUNTEST_PARALLELIZE_DIR var in the environment and runtest_file_p
# dejaGNU procedure is overridden to additionally synchronize through
#
# To parallelize some language check, add the corresponding check-$lang
# to lang_checks_parallelized variable and define check_$lang_parallelize
-# variable (see above check_gcc_parallelize description).
+# variable. This is the upper limit to which it is useful to parallelize the
+# check-$lang target. It doesn't make sense to try e.g. 128 goals for small
+# testsuites like objc or go.
$(lang_checks_parallelized): check-% : site.exp
-rm -rf $(TESTSUITEDIR)/$*-parallel
@if [ "$(filter -j, $(MFLAGS))" = "-j" ]; then \
fi; \
done; \
etags -o TAGS.sub c-family/*.h c-family/*.c *.h *.c *.cc \
+ ../include/*.h \
--language=none --regex="/\(char\|unsigned int\|int\|bool\|void\|HOST_WIDE_INT\|enum [A-Za-z_0-9]+\) [*]?\([A-Za-z_0-9]+\)/\2/" common.opt \
--language=none --regex="/\(DEF_RTL_EXPR\|DEFTREECODE\|DEFGSCODE\).*(\([A-Za-z_0-9]+\)/\2/" rtl.def tree.def gimple.def \
--language=none --regex="/DEFTIMEVAR (\([A-Za-z_0-9]+\)/\1/" timevar.def \