/* Save and restore call-clobbered registers which are live across a call.
- Copyright (C) 1989, 1992, 1994, 1995, 1997, 1998, 1999, 2000,
- 2001, 2002, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
+ Copyright (C) 1989-2015 Free Software Foundation, Inc.
This file is part of GCC.
GCC is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free
-Software Foundation; either version 2, or (at your option) any later
+Software Foundation; either version 3, or (at your option) any later
version.
GCC is distributed in the hope that it will be useful, but WITHOUT ANY
for more details.
You should have received a copy of the GNU General Public License
-along with GCC; see the file COPYING. If not, write to the Free
-Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
-02110-1301, USA. */
+along with GCC; see the file COPYING3. If not see
+<http://www.gnu.org/licenses/>. */
#include "config.h"
#include "system.h"
#include "flags.h"
#include "hard-reg-set.h"
#include "recog.h"
+#include "predict.h"
+#include "function.h"
+#include "dominance.h"
+#include "cfg.h"
#include "basic-block.h"
+#include "df.h"
#include "reload.h"
-#include "function.h"
+#include "symtab.h"
+#include "alias.h"
+#include "tree.h"
+#include "expmed.h"
+#include "dojump.h"
+#include "explow.h"
+#include "calls.h"
+#include "emit-rtl.h"
+#include "varasm.h"
+#include "stmt.h"
#include "expr.h"
-#include "toplev.h"
+#include "diagnostic-core.h"
#include "tm_p.h"
#include "addresses.h"
-#include "df.h"
-
-#ifndef MAX_MOVE_MAX
-#define MAX_MOVE_MAX MOVE_MAX
-#endif
-
-#ifndef MIN_UNITS_PER_WORD
-#define MIN_UNITS_PER_WORD UNITS_PER_WORD
-#endif
+#include "dumpfile.h"
+#include "rtl-iter.h"
#define MOVE_MAX_WORDS (MOVE_MAX / UNITS_PER_WORD)
-/* Modes for each hard register that we can save. The smallest mode is wide
- enough to save the entire contents of the register. When saving the
- register because it is live we first try to save in multi-register modes.
- If that is not possible the save is done one register at a time. */
-
-static enum machine_mode
- regno_save_mode[FIRST_PSEUDO_REGISTER][MAX_MOVE_MAX / MIN_UNITS_PER_WORD + 1];
+#define regno_save_mode \
+ (this_target_reload->x_regno_save_mode)
+#define cached_reg_save_code \
+ (this_target_reload->x_cached_reg_save_code)
+#define cached_reg_restore_code \
+ (this_target_reload->x_cached_reg_restore_code)
/* For each hard register, a place on the stack where it can be saved,
if needed. */
static rtx
regno_save_mem[FIRST_PSEUDO_REGISTER][MAX_MOVE_MAX / MIN_UNITS_PER_WORD + 1];
-/* We will only make a register eligible for caller-save if it can be
- saved in its widest mode with a simple SET insn as long as the memory
- address is valid. We record the INSN_CODE is those insns here since
- when we emit them, the addresses might not be valid, so they might not
- be recognized. */
+/* The number of elements in the subsequent array. */
+static int save_slots_num;
-static int
- reg_save_code[FIRST_PSEUDO_REGISTER][MAX_MACHINE_MODE];
-static int
- reg_restore_code[FIRST_PSEUDO_REGISTER][MAX_MACHINE_MODE];
+/* Allocated slots so far. */
+static rtx save_slots[FIRST_PSEUDO_REGISTER];
/* Set of hard regs currently residing in save area (during insn scan). */
static HARD_REG_SET referenced_regs;
-static void mark_set_regs (rtx, rtx, void *);
-static void mark_referenced_regs (rtx);
+typedef void refmarker_fn (rtx *loc, machine_mode mode, int hardregno,
+ void *mark_arg);
+
+static int reg_save_code (int, machine_mode);
+static int reg_restore_code (int, machine_mode);
+
+struct saved_hard_reg;
+static void initiate_saved_hard_regs (void);
+static void new_saved_hard_reg (int, int);
+static void finish_saved_hard_regs (void);
+static int saved_hard_reg_compare_func (const void *, const void *);
+
+static void mark_set_regs (rtx, const_rtx, void *);
+static void mark_referenced_regs (rtx *, refmarker_fn *mark, void *mark_arg);
+static refmarker_fn mark_reg_as_referenced;
+static refmarker_fn replace_reg_with_saved_mem;
static int insert_save (struct insn_chain *, int, int, HARD_REG_SET *,
- enum machine_mode *);
+ machine_mode *);
static int insert_restore (struct insn_chain *, int, int, int,
- enum machine_mode *);
+ machine_mode *);
static struct insn_chain *insert_one_insn (struct insn_chain *, int, int,
rtx);
-static void add_stored_regs (rtx, rtx, void *);
+static void add_stored_regs (rtx, const_rtx, void *);
+
+\f
+
+static GTY(()) rtx savepat;
+static GTY(()) rtx restpat;
+static GTY(()) rtx test_reg;
+static GTY(()) rtx test_mem;
+static GTY(()) rtx_insn *saveinsn;
+static GTY(()) rtx_insn *restinsn;
+
+/* Return the INSN_CODE used to save register REG in mode MODE. */
+static int
+reg_save_code (int reg, machine_mode mode)
+{
+ bool ok;
+ if (cached_reg_save_code[reg][mode])
+ return cached_reg_save_code[reg][mode];
+ if (!HARD_REGNO_MODE_OK (reg, mode))
+ {
+ /* Depending on how HARD_REGNO_MODE_OK is defined, range propagation
+ might deduce here that reg >= FIRST_PSEUDO_REGISTER. So the assert
+ below silences a warning. */
+ gcc_assert (reg < FIRST_PSEUDO_REGISTER);
+ cached_reg_save_code[reg][mode] = -1;
+ cached_reg_restore_code[reg][mode] = -1;
+ return -1;
+ }
+
+ /* Update the register number and modes of the register
+ and memory operand. */
+ set_mode_and_regno (test_reg, mode, reg);
+ PUT_MODE (test_mem, mode);
+
+ /* Force re-recognition of the modified insns. */
+ INSN_CODE (saveinsn) = -1;
+ INSN_CODE (restinsn) = -1;
+
+ cached_reg_save_code[reg][mode] = recog_memoized (saveinsn);
+ cached_reg_restore_code[reg][mode] = recog_memoized (restinsn);
+
+ /* Now extract both insns and see if we can meet their
+ constraints. We don't know here whether the save and restore will
+ be in size- or speed-tuned code, so just use the set of enabled
+ alternatives. */
+ ok = (cached_reg_save_code[reg][mode] != -1
+ && cached_reg_restore_code[reg][mode] != -1);
+ if (ok)
+ {
+ extract_insn (saveinsn);
+ ok = constrain_operands (1, get_enabled_alternatives (saveinsn));
+ extract_insn (restinsn);
+ ok &= constrain_operands (1, get_enabled_alternatives (restinsn));
+ }
+
+ if (! ok)
+ {
+ cached_reg_save_code[reg][mode] = -1;
+ cached_reg_restore_code[reg][mode] = -1;
+ }
+ gcc_assert (cached_reg_save_code[reg][mode]);
+ return cached_reg_save_code[reg][mode];
+}
+
+/* Return the INSN_CODE used to restore register REG in mode MODE. */
+static int
+reg_restore_code (int reg, machine_mode mode)
+{
+ if (cached_reg_restore_code[reg][mode])
+ return cached_reg_restore_code[reg][mode];
+ /* Populate our cache. */
+ reg_save_code (reg, mode);
+ return cached_reg_restore_code[reg][mode];
+}
\f
/* Initialize for caller-save.
Look at all the hard registers that are used by a call and for which
- regclass.c has not already excluded from being used across a call.
+ reginfo.c has not already excluded from being used across a call.
Ensure that we can find a mode to save the register and that there is a
simple insn to save and restore the register. This latter check avoids
int offset;
rtx address;
int i, j;
- enum machine_mode mode;
- rtx savepat, restpat;
- rtx test_reg, test_mem;
- rtx saveinsn, restinsn;
+ if (caller_save_initialized_p)
+ return;
+
+ caller_save_initialized_p = true;
+
+ CLEAR_HARD_REG_SET (no_caller_save_reg_set);
/* First find all the registers that we need to deal with and all
the modes that they can have. If we can't find a mode to use,
we can't have the register live over calls. */
for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
{
- if (call_used_regs[i] && ! call_fixed_regs[i])
+ if (call_used_regs[i]
+ && !TEST_HARD_REG_BIT (call_fixed_reg_set, i))
{
for (j = 1; j <= MOVE_MAX_WORDS; j++)
{
VOIDmode);
if (regno_save_mode[i][j] == VOIDmode && j == 1)
{
- call_fixed_regs[i] = 1;
SET_HARD_REG_BIT (call_fixed_reg_set, i);
}
}
for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
if (TEST_HARD_REG_BIT
(reg_class_contents
- [(int) base_reg_class (regno_save_mode [i][1], PLUS, CONST_INT)], i))
+ [(int) base_reg_class (regno_save_mode[i][1], ADDR_SPACE_GENERIC,
+ PLUS, CONST_INT)], i))
break;
gcc_assert (i < FIRST_PSEUDO_REGISTER);
for (offset = 1 << (HOST_BITS_PER_INT / 2); offset; offset >>= 1)
{
- address = gen_rtx_PLUS (Pmode, addr_reg, GEN_INT (offset));
+ address = gen_rtx_PLUS (Pmode, addr_reg, gen_int_mode (offset, Pmode));
for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
if (regno_save_mode[i][1] != VOIDmode
To avoid lots of unnecessary RTL allocation, we construct all the RTL
once, then modify the memory and register operands in-place. */
- test_reg = gen_rtx_REG (VOIDmode, 0);
- test_mem = gen_rtx_MEM (VOIDmode, address);
- savepat = gen_rtx_SET (VOIDmode, test_mem, test_reg);
- restpat = gen_rtx_SET (VOIDmode, test_reg, test_mem);
-
- saveinsn = gen_rtx_INSN (VOIDmode, 0, 0, 0, 0, 0, savepat, -1, 0);
- restinsn = gen_rtx_INSN (VOIDmode, 0, 0, 0, 0, 0, restpat, -1, 0);
-
- for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
- for (mode = 0 ; mode < MAX_MACHINE_MODE; mode++)
- if (HARD_REGNO_MODE_OK (i, mode))
- {
- int ok;
-
- /* Update the register number and modes of the register
- and memory operand. */
- SET_REGNO (test_reg, i);
- PUT_MODE (test_reg, mode);
- PUT_MODE (test_mem, mode);
-
- /* Force re-recognition of the modified insns. */
- INSN_CODE (saveinsn) = -1;
- INSN_CODE (restinsn) = -1;
-
- reg_save_code[i][mode] = recog_memoized (saveinsn);
- reg_restore_code[i][mode] = recog_memoized (restinsn);
-
- /* Now extract both insns and see if we can meet their
- constraints. */
- ok = (reg_save_code[i][mode] != -1
- && reg_restore_code[i][mode] != -1);
- if (ok)
- {
- extract_insn (saveinsn);
- ok = constrain_operands (1);
- extract_insn (restinsn);
- ok &= constrain_operands (1);
- }
+ test_reg = gen_rtx_REG (word_mode, LAST_VIRTUAL_REGISTER + 1);
+ test_mem = gen_rtx_MEM (word_mode, address);
+ savepat = gen_rtx_SET (test_mem, test_reg);
+ restpat = gen_rtx_SET (test_reg, test_mem);
- if (! ok)
- {
- reg_save_code[i][mode] = -1;
- reg_restore_code[i][mode] = -1;
- }
- }
- else
- {
- reg_save_code[i][mode] = -1;
- reg_restore_code[i][mode] = -1;
- }
+ saveinsn = gen_rtx_INSN (VOIDmode, 0, 0, 0, savepat, 0, -1, 0);
+ restinsn = gen_rtx_INSN (VOIDmode, 0, 0, 0, restpat, 0, -1, 0);
for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
for (j = 1; j <= MOVE_MAX_WORDS; j++)
- if (reg_save_code [i][regno_save_mode[i][j]] == -1)
+ if (reg_save_code (i,regno_save_mode[i][j]) == -1)
{
regno_save_mode[i][j] = VOIDmode;
if (j == 1)
{
- call_fixed_regs[i] = 1;
SET_HARD_REG_BIT (call_fixed_reg_set, i);
+ if (call_used_regs[i])
+ SET_HARD_REG_BIT (no_caller_save_reg_set, i);
}
}
}
+
\f
+
/* Initialize save areas by showing that we haven't allocated any yet. */
void
for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
for (j = 1; j <= MOVE_MAX_WORDS; j++)
regno_save_mem[i][j] = 0;
+ save_slots_num = 0;
+
+}
+
+/* The structure represents a hard register which should be saved
+ through the call. It is used when the integrated register
+ allocator (IRA) is used and sharing save slots is on. */
+struct saved_hard_reg
+{
+ /* Order number starting with 0. */
+ int num;
+ /* The hard regno. */
+ int hard_regno;
+ /* Execution frequency of all calls through which given hard
+ register should be saved. */
+ int call_freq;
+ /* Stack slot reserved to save the hard register through calls. */
+ rtx slot;
+ /* True if it is first hard register in the chain of hard registers
+ sharing the same stack slot. */
+ int first_p;
+ /* Order number of the next hard register structure with the same
+ slot in the chain. -1 represents end of the chain. */
+ int next;
+};
+
+/* Map: hard register number to the corresponding structure. */
+static struct saved_hard_reg *hard_reg_map[FIRST_PSEUDO_REGISTER];
+
+/* The number of all structures representing hard registers should be
+ saved, in order words, the number of used elements in the following
+ array. */
+static int saved_regs_num;
+
+/* Pointers to all the structures. Index is the order number of the
+ corresponding structure. */
+static struct saved_hard_reg *all_saved_regs[FIRST_PSEUDO_REGISTER];
+
+/* First called function for work with saved hard registers. */
+static void
+initiate_saved_hard_regs (void)
+{
+ int i;
+
+ saved_regs_num = 0;
+ for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
+ hard_reg_map[i] = NULL;
+}
+
+/* Allocate and return new saved hard register with given REGNO and
+ CALL_FREQ. */
+static void
+new_saved_hard_reg (int regno, int call_freq)
+{
+ struct saved_hard_reg *saved_reg;
+
+ saved_reg
+ = (struct saved_hard_reg *) xmalloc (sizeof (struct saved_hard_reg));
+ hard_reg_map[regno] = all_saved_regs[saved_regs_num] = saved_reg;
+ saved_reg->num = saved_regs_num++;
+ saved_reg->hard_regno = regno;
+ saved_reg->call_freq = call_freq;
+ saved_reg->first_p = FALSE;
+ saved_reg->next = -1;
+}
+
+/* Free memory allocated for the saved hard registers. */
+static void
+finish_saved_hard_regs (void)
+{
+ int i;
+
+ for (i = 0; i < saved_regs_num; i++)
+ free (all_saved_regs[i]);
+}
+
+/* The function is used to sort the saved hard register structures
+ according their frequency. */
+static int
+saved_hard_reg_compare_func (const void *v1p, const void *v2p)
+{
+ const struct saved_hard_reg *p1 = *(struct saved_hard_reg * const *) v1p;
+ const struct saved_hard_reg *p2 = *(struct saved_hard_reg * const *) v2p;
+
+ if (flag_omit_frame_pointer)
+ {
+ if (p1->call_freq - p2->call_freq != 0)
+ return p1->call_freq - p2->call_freq;
+ }
+ else if (p2->call_freq - p1->call_freq != 0)
+ return p2->call_freq - p1->call_freq;
+
+ return p1->num - p2->num;
}
/* Allocate save areas for any hard registers that might need saving.
overestimate slightly (especially if some of these registers are later
used as spill registers), but it should not be significant.
+ For IRA we use priority coloring to decrease stack slots needed for
+ saving hard registers through calls. We build conflicts for them
+ to do coloring.
+
Future work:
In the fallback case we should iterate backwards across all possible
void
setup_save_areas (void)
{
- int i, j, k;
- unsigned int r;
+ int i, j, k, freq;
HARD_REG_SET hard_regs_used;
+ struct saved_hard_reg *saved_reg;
+ rtx_insn *insn;
+ struct insn_chain *chain, *next;
+ unsigned int regno;
+ HARD_REG_SET hard_regs_to_save, used_regs, this_insn_sets;
+ reg_set_iterator rsi;
- /* Allocate space in the save area for the largest multi-register
- pseudos first, then work backwards to single register
- pseudos. */
-
- /* Find and record all call-used hard-registers in this function. */
CLEAR_HARD_REG_SET (hard_regs_used);
- for (i = FIRST_PSEUDO_REGISTER; i < max_regno; i++)
- if (reg_renumber[i] >= 0 && REG_N_CALLS_CROSSED (i) > 0)
- {
- unsigned int regno = reg_renumber[i];
- unsigned int endregno
- = end_hard_regno (GET_MODE (regno_reg_rtx[i]), regno);
-
- for (r = regno; r < endregno; r++)
- if (call_used_regs[r])
- SET_HARD_REG_BIT (hard_regs_used, r);
- }
-
- /* Now run through all the call-used hard-registers and allocate
- space for them in the caller-save area. Try to allocate space
- in a manner which allows multi-register saves/restores to be done. */
- for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
- for (j = MOVE_MAX_WORDS; j > 0; j--)
- {
- int do_save = 1;
+ /* Find every CALL_INSN and record which hard regs are live across the
+ call into HARD_REG_MAP and HARD_REGS_USED. */
+ initiate_saved_hard_regs ();
+ /* Create hard reg saved regs. */
+ for (chain = reload_insn_chain; chain != 0; chain = next)
+ {
+ rtx cheap;
+
+ insn = chain->insn;
+ next = chain->next;
+ if (!CALL_P (insn)
+ || find_reg_note (insn, REG_NORETURN, NULL))
+ continue;
+ freq = REG_FREQ_FROM_BB (BLOCK_FOR_INSN (insn));
+ REG_SET_TO_HARD_REG_SET (hard_regs_to_save,
+ &chain->live_throughout);
+ get_call_reg_set_usage (insn, &used_regs, call_used_reg_set);
+
+ /* Record all registers set in this call insn. These don't
+ need to be saved. N.B. the call insn might set a subreg
+ of a multi-hard-reg pseudo; then the pseudo is considered
+ live during the call, but the subreg that is set
+ isn't. */
+ CLEAR_HARD_REG_SET (this_insn_sets);
+ note_stores (PATTERN (insn), mark_set_regs, &this_insn_sets);
+ /* Sibcalls are considered to set the return value. */
+ if (SIBLING_CALL_P (insn) && crtl->return_rtx)
+ mark_set_regs (crtl->return_rtx, NULL_RTX, &this_insn_sets);
+
+ AND_COMPL_HARD_REG_SET (used_regs, call_fixed_reg_set);
+ AND_COMPL_HARD_REG_SET (used_regs, this_insn_sets);
+ AND_HARD_REG_SET (hard_regs_to_save, used_regs);
+ for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++)
+ if (TEST_HARD_REG_BIT (hard_regs_to_save, regno))
+ {
+ if (hard_reg_map[regno] != NULL)
+ hard_reg_map[regno]->call_freq += freq;
+ else
+ new_saved_hard_reg (regno, freq);
+ SET_HARD_REG_BIT (hard_regs_used, regno);
+ }
+ cheap = find_reg_note (insn, REG_RETURNED, NULL);
+ if (cheap)
+ cheap = XEXP (cheap, 0);
+ /* Look through all live pseudos, mark their hard registers. */
+ EXECUTE_IF_SET_IN_REG_SET
+ (&chain->live_throughout, FIRST_PSEUDO_REGISTER, regno, rsi)
+ {
+ int r = reg_renumber[regno];
+ int bound;
+
+ if (r < 0 || regno_reg_rtx[regno] == cheap)
+ continue;
+
+ bound = r + hard_regno_nregs[r][PSEUDO_REGNO_MODE (regno)];
+ for (; r < bound; r++)
+ if (TEST_HARD_REG_BIT (used_regs, r))
+ {
+ if (hard_reg_map[r] != NULL)
+ hard_reg_map[r]->call_freq += freq;
+ else
+ new_saved_hard_reg (r, freq);
+ SET_HARD_REG_BIT (hard_regs_to_save, r);
+ SET_HARD_REG_BIT (hard_regs_used, r);
+ }
+ }
+ }
+
+ /* If requested, figure out which hard regs can share save slots. */
+ if (optimize && flag_ira_share_save_slots)
+ {
+ rtx slot;
+ char *saved_reg_conflicts;
+ int next_k;
+ struct saved_hard_reg *saved_reg2, *saved_reg3;
+ int call_saved_regs_num;
+ struct saved_hard_reg *call_saved_regs[FIRST_PSEUDO_REGISTER];
+ int best_slot_num;
+ int prev_save_slots_num;
+ rtx prev_save_slots[FIRST_PSEUDO_REGISTER];
+
+ /* Find saved hard register conflicts. */
+ saved_reg_conflicts = (char *) xmalloc (saved_regs_num * saved_regs_num);
+ memset (saved_reg_conflicts, 0, saved_regs_num * saved_regs_num);
+ for (chain = reload_insn_chain; chain != 0; chain = next)
+ {
+ rtx cheap;
+ call_saved_regs_num = 0;
+ insn = chain->insn;
+ next = chain->next;
+ if (!CALL_P (insn)
+ || find_reg_note (insn, REG_NORETURN, NULL))
+ continue;
+
+ cheap = find_reg_note (insn, REG_RETURNED, NULL);
+ if (cheap)
+ cheap = XEXP (cheap, 0);
+
+ REG_SET_TO_HARD_REG_SET (hard_regs_to_save,
+ &chain->live_throughout);
+ get_call_reg_set_usage (insn, &used_regs, call_used_reg_set);
+
+ /* Record all registers set in this call insn. These don't
+ need to be saved. N.B. the call insn might set a subreg
+ of a multi-hard-reg pseudo; then the pseudo is considered
+ live during the call, but the subreg that is set
+ isn't. */
+ CLEAR_HARD_REG_SET (this_insn_sets);
+ note_stores (PATTERN (insn), mark_set_regs, &this_insn_sets);
+ /* Sibcalls are considered to set the return value,
+ compare df-scan.c:df_get_call_refs. */
+ if (SIBLING_CALL_P (insn) && crtl->return_rtx)
+ mark_set_regs (crtl->return_rtx, NULL_RTX, &this_insn_sets);
+
+ AND_COMPL_HARD_REG_SET (used_regs, call_fixed_reg_set);
+ AND_COMPL_HARD_REG_SET (used_regs, this_insn_sets);
+ AND_HARD_REG_SET (hard_regs_to_save, used_regs);
+ for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++)
+ if (TEST_HARD_REG_BIT (hard_regs_to_save, regno))
+ {
+ gcc_assert (hard_reg_map[regno] != NULL);
+ call_saved_regs[call_saved_regs_num++] = hard_reg_map[regno];
+ }
+ /* Look through all live pseudos, mark their hard registers. */
+ EXECUTE_IF_SET_IN_REG_SET
+ (&chain->live_throughout, FIRST_PSEUDO_REGISTER, regno, rsi)
+ {
+ int r = reg_renumber[regno];
+ int bound;
- /* If no mode exists for this size, try another. Also break out
- if we have already saved this hard register. */
- if (regno_save_mode[i][j] == VOIDmode || regno_save_mem[i][1] != 0)
- continue;
+ if (r < 0 || regno_reg_rtx[regno] == cheap)
+ continue;
- /* See if any register in this group has been saved. */
- for (k = 0; k < j; k++)
- if (regno_save_mem[i + k][1])
+ bound = r + hard_regno_nregs[r][PSEUDO_REGNO_MODE (regno)];
+ for (; r < bound; r++)
+ if (TEST_HARD_REG_BIT (used_regs, r))
+ call_saved_regs[call_saved_regs_num++] = hard_reg_map[r];
+ }
+ for (i = 0; i < call_saved_regs_num; i++)
{
- do_save = 0;
- break;
+ saved_reg = call_saved_regs[i];
+ for (j = 0; j < call_saved_regs_num; j++)
+ if (i != j)
+ {
+ saved_reg2 = call_saved_regs[j];
+ saved_reg_conflicts[saved_reg->num * saved_regs_num
+ + saved_reg2->num]
+ = saved_reg_conflicts[saved_reg2->num * saved_regs_num
+ + saved_reg->num]
+ = TRUE;
+ }
}
- if (! do_save)
- continue;
-
- for (k = 0; k < j; k++)
- if (! TEST_HARD_REG_BIT (hard_regs_used, i + k))
+ }
+ /* Sort saved hard regs. */
+ qsort (all_saved_regs, saved_regs_num, sizeof (struct saved_hard_reg *),
+ saved_hard_reg_compare_func);
+ /* Initiate slots available from the previous reload
+ iteration. */
+ prev_save_slots_num = save_slots_num;
+ memcpy (prev_save_slots, save_slots, save_slots_num * sizeof (rtx));
+ save_slots_num = 0;
+ /* Allocate stack slots for the saved hard registers. */
+ for (i = 0; i < saved_regs_num; i++)
+ {
+ saved_reg = all_saved_regs[i];
+ regno = saved_reg->hard_regno;
+ for (j = 0; j < i; j++)
{
- do_save = 0;
- break;
+ saved_reg2 = all_saved_regs[j];
+ if (! saved_reg2->first_p)
+ continue;
+ slot = saved_reg2->slot;
+ for (k = j; k >= 0; k = next_k)
+ {
+ saved_reg3 = all_saved_regs[k];
+ next_k = saved_reg3->next;
+ if (saved_reg_conflicts[saved_reg->num * saved_regs_num
+ + saved_reg3->num])
+ break;
+ }
+ if (k < 0
+ && (GET_MODE_SIZE (regno_save_mode[regno][1])
+ <= GET_MODE_SIZE (regno_save_mode
+ [saved_reg2->hard_regno][1])))
+ {
+ saved_reg->slot
+ = adjust_address_nv
+ (slot, regno_save_mode[saved_reg->hard_regno][1], 0);
+ regno_save_mem[regno][1] = saved_reg->slot;
+ saved_reg->next = saved_reg2->next;
+ saved_reg2->next = i;
+ if (dump_file != NULL)
+ fprintf (dump_file, "%d uses slot of %d\n",
+ regno, saved_reg2->hard_regno);
+ break;
+ }
}
- if (! do_save)
- continue;
-
- /* We have found an acceptable mode to store in. */
- regno_save_mem[i][j]
- = assign_stack_local (regno_save_mode[i][j],
- GET_MODE_SIZE (regno_save_mode[i][j]), 0);
-
- /* Setup single word save area just in case... */
- for (k = 0; k < j; k++)
- /* This should not depend on WORDS_BIG_ENDIAN.
- The order of words in regs is the same as in memory. */
- regno_save_mem[i + k][1]
- = adjust_address_nv (regno_save_mem[i][j],
- regno_save_mode[i + k][1],
- k * UNITS_PER_WORD);
- }
+ if (j == i)
+ {
+ saved_reg->first_p = TRUE;
+ for (best_slot_num = -1, j = 0; j < prev_save_slots_num; j++)
+ {
+ slot = prev_save_slots[j];
+ if (slot == NULL_RTX)
+ continue;
+ if (GET_MODE_SIZE (regno_save_mode[regno][1])
+ <= GET_MODE_SIZE (GET_MODE (slot))
+ && best_slot_num < 0)
+ best_slot_num = j;
+ if (GET_MODE (slot) == regno_save_mode[regno][1])
+ break;
+ }
+ if (best_slot_num >= 0)
+ {
+ saved_reg->slot = prev_save_slots[best_slot_num];
+ saved_reg->slot
+ = adjust_address_nv
+ (saved_reg->slot,
+ regno_save_mode[saved_reg->hard_regno][1], 0);
+ if (dump_file != NULL)
+ fprintf (dump_file,
+ "%d uses a slot from prev iteration\n", regno);
+ prev_save_slots[best_slot_num] = NULL_RTX;
+ if (best_slot_num + 1 == prev_save_slots_num)
+ prev_save_slots_num--;
+ }
+ else
+ {
+ saved_reg->slot
+ = assign_stack_local_1
+ (regno_save_mode[regno][1],
+ GET_MODE_SIZE (regno_save_mode[regno][1]), 0,
+ ASLK_REDUCE_ALIGN);
+ if (dump_file != NULL)
+ fprintf (dump_file, "%d uses a new slot\n", regno);
+ }
+ regno_save_mem[regno][1] = saved_reg->slot;
+ save_slots[save_slots_num++] = saved_reg->slot;
+ }
+ }
+ free (saved_reg_conflicts);
+ finish_saved_hard_regs ();
+ }
+ else
+ {
+ /* We are not sharing slots.
+
+ Run through all the call-used hard-registers and allocate
+ space for each in the caller-save area. Try to allocate space
+ in a manner which allows multi-register saves/restores to be done. */
+
+ for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
+ for (j = MOVE_MAX_WORDS; j > 0; j--)
+ {
+ int do_save = 1;
+
+ /* If no mode exists for this size, try another. Also break out
+ if we have already saved this hard register. */
+ if (regno_save_mode[i][j] == VOIDmode || regno_save_mem[i][1] != 0)
+ continue;
+
+ /* See if any register in this group has been saved. */
+ for (k = 0; k < j; k++)
+ if (regno_save_mem[i + k][1])
+ {
+ do_save = 0;
+ break;
+ }
+ if (! do_save)
+ continue;
+
+ for (k = 0; k < j; k++)
+ if (! TEST_HARD_REG_BIT (hard_regs_used, i + k))
+ {
+ do_save = 0;
+ break;
+ }
+ if (! do_save)
+ continue;
+
+ /* We have found an acceptable mode to store in. Since
+ hard register is always saved in the widest mode
+ available, the mode may be wider than necessary, it is
+ OK to reduce the alignment of spill space. We will
+ verify that it is equal to or greater than required
+ when we restore and save the hard register in
+ insert_restore and insert_save. */
+ regno_save_mem[i][j]
+ = assign_stack_local_1 (regno_save_mode[i][j],
+ GET_MODE_SIZE (regno_save_mode[i][j]),
+ 0, ASLK_REDUCE_ALIGN);
+
+ /* Setup single word save area just in case... */
+ for (k = 0; k < j; k++)
+ /* This should not depend on WORDS_BIG_ENDIAN.
+ The order of words in regs is the same as in memory. */
+ regno_save_mem[i + k][1]
+ = adjust_address_nv (regno_save_mem[i][j],
+ regno_save_mode[i + k][1],
+ k * UNITS_PER_WORD);
+ }
+ }
/* Now loop again and set the alias set of any save areas we made to
the alias set used to represent frame objects. */
if (regno_save_mem[i][j] != 0)
set_mem_alias_set (regno_save_mem[i][j], get_frame_alias_set ());
}
+
\f
+
/* Find the places where hard regs are live across calls and save them. */
void
save_call_clobbered_regs (void)
{
- struct insn_chain *chain, *next;
- enum machine_mode save_mode [FIRST_PSEUDO_REGISTER];
+ struct insn_chain *chain, *next, *last = NULL;
+ machine_mode save_mode [FIRST_PSEUDO_REGISTER];
/* Computed in mark_set_regs, holds all registers set by the current
instruction. */
for (chain = reload_insn_chain; chain != 0; chain = next)
{
- rtx insn = chain->insn;
+ rtx_insn *insn = chain->insn;
enum rtx_code code = GET_CODE (insn);
next = chain->next;
gcc_assert (!chain->is_caller_save_insn);
- if (INSN_P (insn))
+ if (NONDEBUG_INSN_P (insn))
{
/* If some registers have been saved, see if INSN references
any of them. We must restore them before the insn if so. */
if (n_regs_saved)
{
int regno;
+ HARD_REG_SET this_insn_sets;
if (code == JUMP_INSN)
/* Restore all registers if this is a JUMP_INSN. */
else
{
CLEAR_HARD_REG_SET (referenced_regs);
- mark_referenced_regs (PATTERN (insn));
+ mark_referenced_regs (&PATTERN (insn),
+ mark_reg_as_referenced, NULL);
AND_HARD_REG_SET (referenced_regs, hard_regs_saved);
}
for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++)
if (TEST_HARD_REG_BIT (referenced_regs, regno))
- regno += insert_restore (chain, 1, regno, MOVE_MAX_WORDS, save_mode);
+ regno += insert_restore (chain, 1, regno, MOVE_MAX_WORDS,
+ save_mode);
+ /* If a saved register is set after the call, this means we no
+ longer should restore it. This can happen when parts of a
+ multi-word pseudo do not conflict with other pseudos, so
+ IRA may allocate the same hard register for both. One may
+ be live across the call, while the other is set
+ afterwards. */
+ CLEAR_HARD_REG_SET (this_insn_sets);
+ note_stores (PATTERN (insn), mark_set_regs, &this_insn_sets);
+ AND_COMPL_HARD_REG_SET (hard_regs_saved, this_insn_sets);
}
if (code == CALL_INSN
{
unsigned regno;
HARD_REG_SET hard_regs_to_save;
+ HARD_REG_SET call_def_reg_set;
reg_set_iterator rsi;
+ rtx cheap;
+
+ cheap = find_reg_note (insn, REG_RETURNED, NULL);
+ if (cheap)
+ cheap = XEXP (cheap, 0);
/* Use the register life information in CHAIN to compute which
regs are live during the call. */
{
int r = reg_renumber[regno];
int nregs;
- enum machine_mode mode;
+ machine_mode mode;
- gcc_assert (r >= 0);
+ if (r < 0 || regno_reg_rtx[regno] == cheap)
+ continue;
nregs = hard_regno_nregs[r][PSEUDO_REGNO_MODE (regno)];
mode = HARD_REGNO_CALLER_SAVE_MODE
(r, nregs, PSEUDO_REGNO_MODE (regno));
AND_COMPL_HARD_REG_SET (hard_regs_to_save, call_fixed_reg_set);
AND_COMPL_HARD_REG_SET (hard_regs_to_save, this_insn_sets);
AND_COMPL_HARD_REG_SET (hard_regs_to_save, hard_regs_saved);
- AND_HARD_REG_SET (hard_regs_to_save, call_used_reg_set);
+ get_call_reg_set_usage (insn, &call_def_reg_set,
+ call_used_reg_set);
+ AND_HARD_REG_SET (hard_regs_to_save, call_def_reg_set);
for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++)
if (TEST_HARD_REG_BIT (hard_regs_to_save, regno))
for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++)
if (TEST_HARD_REG_BIT (hard_regs_saved, regno))
n_regs_saved++;
+
+ if (cheap
+ && HARD_REGISTER_P (cheap)
+ && TEST_HARD_REG_BIT (call_used_reg_set, REGNO (cheap)))
+ {
+ rtx dest, newpat;
+ rtx pat = PATTERN (insn);
+ if (GET_CODE (pat) == PARALLEL)
+ pat = XVECEXP (pat, 0, 0);
+ dest = SET_DEST (pat);
+ /* For multiple return values dest is PARALLEL.
+ Currently we handle only single return value case. */
+ if (REG_P (dest))
+ {
+ newpat = gen_rtx_SET (cheap, copy_rtx (dest));
+ chain = insert_one_insn (chain, 0, -1, newpat);
+ }
+ }
}
+ last = chain;
}
+ else if (DEBUG_INSN_P (insn) && n_regs_saved)
+ mark_referenced_regs (&PATTERN (insn),
+ replace_reg_with_saved_mem,
+ save_mode);
- if (chain->next == 0 || chain->next->block > chain->block)
+ if (chain->next == 0 || chain->next->block != chain->block)
{
int regno;
/* At the end of the basic block, we must restore any registers that
remain saved. If the last insn in the block is a JUMP_INSN, put
the restore before the insn, otherwise, put it after the insn. */
+ if (n_regs_saved
+ && DEBUG_INSN_P (insn)
+ && last
+ && last->block == chain->block)
+ {
+ rtx_insn *ins, *prev;
+ basic_block bb = BLOCK_FOR_INSN (insn);
+
+ /* When adding hard reg restores after a DEBUG_INSN, move
+ all notes between last real insn and this DEBUG_INSN after
+ the DEBUG_INSN, otherwise we could get code
+ -g/-g0 differences. */
+ for (ins = PREV_INSN (insn); ins != last->insn; ins = prev)
+ {
+ prev = PREV_INSN (ins);
+ if (NOTE_P (ins))
+ {
+ SET_NEXT_INSN (prev) = NEXT_INSN (ins);
+ SET_PREV_INSN (NEXT_INSN (ins)) = prev;
+ SET_PREV_INSN (ins) = insn;
+ SET_NEXT_INSN (ins) = NEXT_INSN (insn);
+ SET_NEXT_INSN (insn) = ins;
+ if (NEXT_INSN (ins))
+ SET_PREV_INSN (NEXT_INSN (ins)) = ins;
+ if (BB_END (bb) == insn)
+ BB_END (bb) = ins;
+ }
+ else
+ gcc_assert (DEBUG_INSN_P (ins));
+ }
+ }
+ last = NULL;
+
if (n_regs_saved)
for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++)
if (TEST_HARD_REG_BIT (hard_regs_saved, regno))
been assigned hard regs have had their register number changed already,
so we can ignore pseudos. */
static void
-mark_set_regs (rtx reg, rtx setter ATTRIBUTE_UNUSED, void *data)
+mark_set_regs (rtx reg, const_rtx setter ATTRIBUTE_UNUSED, void *data)
{
int regno, endregno, i;
- HARD_REG_SET *this_insn_sets = data;
+ HARD_REG_SET *this_insn_sets = (HARD_REG_SET *) data;
if (GET_CODE (reg) == SUBREG)
{
&& REGNO (reg) < FIRST_PSEUDO_REGISTER)
{
regno = REGNO (reg);
- endregno = END_HARD_REGNO (reg);
+ endregno = END_REGNO (reg);
}
else
return;
been assigned hard regs have had their register number changed already,
so we can ignore pseudos. */
static void
-add_stored_regs (rtx reg, rtx setter, void *data)
+add_stored_regs (rtx reg, const_rtx setter, void *data)
{
int regno, endregno, i;
- enum machine_mode mode = GET_MODE (reg);
+ machine_mode mode = GET_MODE (reg);
int offset = 0;
if (GET_CODE (setter) == CLOBBER)
/* Walk X and record all referenced registers in REFERENCED_REGS. */
static void
-mark_referenced_regs (rtx x)
+mark_referenced_regs (rtx *loc, refmarker_fn *mark, void *arg)
{
- enum rtx_code code = GET_CODE (x);
+ enum rtx_code code = GET_CODE (*loc);
const char *fmt;
int i, j;
if (code == SET)
- mark_referenced_regs (SET_SRC (x));
+ mark_referenced_regs (&SET_SRC (*loc), mark, arg);
if (code == SET || code == CLOBBER)
{
- x = SET_DEST (x);
- code = GET_CODE (x);
- if ((code == REG && REGNO (x) < FIRST_PSEUDO_REGISTER)
+ loc = &SET_DEST (*loc);
+ code = GET_CODE (*loc);
+ if ((code == REG && REGNO (*loc) < FIRST_PSEUDO_REGISTER)
|| code == PC || code == CC0
- || (code == SUBREG && REG_P (SUBREG_REG (x))
- && REGNO (SUBREG_REG (x)) < FIRST_PSEUDO_REGISTER
+ || (code == SUBREG && REG_P (SUBREG_REG (*loc))
+ && REGNO (SUBREG_REG (*loc)) < FIRST_PSEUDO_REGISTER
/* If we're setting only part of a multi-word register,
we shall mark it as referenced, because the words
that are not being set should be restored. */
- && ((GET_MODE_SIZE (GET_MODE (x))
- >= GET_MODE_SIZE (GET_MODE (SUBREG_REG (x))))
- || (GET_MODE_SIZE (GET_MODE (SUBREG_REG (x)))
+ && ((GET_MODE_SIZE (GET_MODE (*loc))
+ >= GET_MODE_SIZE (GET_MODE (SUBREG_REG (*loc))))
+ || (GET_MODE_SIZE (GET_MODE (SUBREG_REG (*loc)))
<= UNITS_PER_WORD))))
return;
}
if (code == MEM || code == SUBREG)
{
- x = XEXP (x, 0);
- code = GET_CODE (x);
+ loc = &XEXP (*loc, 0);
+ code = GET_CODE (*loc);
}
if (code == REG)
{
- int regno = REGNO (x);
+ int regno = REGNO (*loc);
int hardregno = (regno < FIRST_PSEUDO_REGISTER ? regno
: reg_renumber[regno]);
if (hardregno >= 0)
- add_to_hard_reg_set (&referenced_regs, GET_MODE (x), hardregno);
+ mark (loc, GET_MODE (*loc), hardregno, arg);
+ else if (arg)
+ /* ??? Will we ever end up with an equiv expression in a debug
+ insn, that would have required restoring a reg, or will
+ reload take care of it for us? */
+ return;
/* If this is a pseudo that did not get a hard register, scan its
memory location, since it might involve the use of another
register, which might be saved. */
- else if (reg_equiv_mem[regno] != 0)
- mark_referenced_regs (XEXP (reg_equiv_mem[regno], 0));
- else if (reg_equiv_address[regno] != 0)
- mark_referenced_regs (reg_equiv_address[regno]);
+ else if (reg_equiv_mem (regno) != 0)
+ mark_referenced_regs (&XEXP (reg_equiv_mem (regno), 0), mark, arg);
+ else if (reg_equiv_address (regno) != 0)
+ mark_referenced_regs (®_equiv_address (regno), mark, arg);
return;
}
for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
{
if (fmt[i] == 'e')
- mark_referenced_regs (XEXP (x, i));
+ mark_referenced_regs (&XEXP (*loc, i), mark, arg);
else if (fmt[i] == 'E')
- for (j = XVECLEN (x, i) - 1; j >= 0; j--)
- mark_referenced_regs (XVECEXP (x, i, j));
+ for (j = XVECLEN (*loc, i) - 1; j >= 0; j--)
+ mark_referenced_regs (&XVECEXP (*loc, i, j), mark, arg);
+ }
+}
+
+/* Parameter function for mark_referenced_regs() that adds registers
+ present in the insn and in equivalent mems and addresses to
+ referenced_regs. */
+
+static void
+mark_reg_as_referenced (rtx *loc ATTRIBUTE_UNUSED,
+ machine_mode mode,
+ int hardregno,
+ void *arg ATTRIBUTE_UNUSED)
+{
+ add_to_hard_reg_set (&referenced_regs, mode, hardregno);
+}
+
+/* Parameter function for mark_referenced_regs() that replaces
+ registers referenced in a debug_insn that would have been restored,
+ should it be a non-debug_insn, with their save locations. */
+
+static void
+replace_reg_with_saved_mem (rtx *loc,
+ machine_mode mode,
+ int regno,
+ void *arg)
+{
+ unsigned int i, nregs = hard_regno_nregs [regno][mode];
+ rtx mem;
+ machine_mode *save_mode = (machine_mode *)arg;
+
+ for (i = 0; i < nregs; i++)
+ if (TEST_HARD_REG_BIT (hard_regs_saved, regno + i))
+ break;
+
+ /* If none of the registers in the range would need restoring, we're
+ all set. */
+ if (i == nregs)
+ return;
+
+ while (++i < nregs)
+ if (!TEST_HARD_REG_BIT (hard_regs_saved, regno + i))
+ break;
+
+ if (i == nregs
+ && regno_save_mem[regno][nregs])
+ {
+ mem = copy_rtx (regno_save_mem[regno][nregs]);
+
+ if (nregs == (unsigned int) hard_regno_nregs[regno][save_mode[regno]])
+ mem = adjust_address_nv (mem, save_mode[regno], 0);
+
+ if (GET_MODE (mem) != mode)
+ {
+ /* This is gen_lowpart_if_possible(), but without validating
+ the newly-formed address. */
+ int offset = 0;
+
+ if (WORDS_BIG_ENDIAN)
+ offset = (MAX (GET_MODE_SIZE (GET_MODE (mem)), UNITS_PER_WORD)
+ - MAX (GET_MODE_SIZE (mode), UNITS_PER_WORD));
+ if (BYTES_BIG_ENDIAN)
+ /* Adjust the address so that the address-after-the-data is
+ unchanged. */
+ offset -= (MIN (UNITS_PER_WORD, GET_MODE_SIZE (mode))
+ - MIN (UNITS_PER_WORD, GET_MODE_SIZE (GET_MODE (mem))));
+
+ mem = adjust_address_nv (mem, mode, offset);
+ }
}
+ else
+ {
+ mem = gen_rtx_CONCATN (mode, rtvec_alloc (nregs));
+ for (i = 0; i < nregs; i++)
+ if (TEST_HARD_REG_BIT (hard_regs_saved, regno + i))
+ {
+ gcc_assert (regno_save_mem[regno + i][1]);
+ XVECEXP (mem, 0, i) = copy_rtx (regno_save_mem[regno + i][1]);
+ }
+ else
+ {
+ machine_mode smode = save_mode[regno];
+ gcc_assert (smode != VOIDmode);
+ if (hard_regno_nregs [regno][smode] > 1)
+ smode = mode_for_size (GET_MODE_SIZE (mode) / nregs,
+ GET_MODE_CLASS (mode), 0);
+ XVECEXP (mem, 0, i) = gen_rtx_REG (smode, regno + i);
+ }
+ }
+
+ gcc_assert (GET_MODE (mem) == mode);
+ *loc = mem;
}
+
\f
/* Insert a sequence of insns to restore. Place these insns in front of
CHAIN if BEFORE_P is nonzero, behind the insn otherwise. MAXRESTORE is
static int
insert_restore (struct insn_chain *chain, int before_p, int regno,
- int maxrestore, enum machine_mode *save_mode)
+ int maxrestore, machine_mode *save_mode)
{
int i, k;
rtx pat = NULL_RTX;
int code;
unsigned int numregs = 0;
- struct insn_chain *new;
+ struct insn_chain *new_chain;
rtx mem;
/* A common failure mode if register status is not correct in the
mem = regno_save_mem [regno][numregs];
if (save_mode [regno] != VOIDmode
&& save_mode [regno] != GET_MODE (mem)
- && numregs == (unsigned int) hard_regno_nregs[regno][save_mode [regno]])
- mem = adjust_address (mem, save_mode[regno], 0);
+ && numregs == (unsigned int) hard_regno_nregs[regno][save_mode [regno]]
+ /* Check that insn to restore REGNO in save_mode[regno] is
+ correct. */
+ && reg_save_code (regno, save_mode[regno]) >= 0)
+ mem = adjust_address_nv (mem, save_mode[regno], 0);
else
mem = copy_rtx (mem);
- pat = gen_rtx_SET (VOIDmode,
- gen_rtx_REG (GET_MODE (mem),
- regno), mem);
- code = reg_restore_code[regno][GET_MODE (mem)];
- new = insert_one_insn (chain, before_p, code, pat);
+
+ /* Verify that the alignment of spill space is equal to or greater
+ than required. */
+ gcc_assert (MIN (MAX_SUPPORTED_STACK_ALIGNMENT,
+ GET_MODE_ALIGNMENT (GET_MODE (mem))) <= MEM_ALIGN (mem));
+
+ pat = gen_rtx_SET (gen_rtx_REG (GET_MODE (mem), regno), mem);
+ code = reg_restore_code (regno, GET_MODE (mem));
+ new_chain = insert_one_insn (chain, before_p, code, pat);
/* Clear status for all registers we restored. */
for (k = 0; k < i; k++)
{
CLEAR_HARD_REG_BIT (hard_regs_saved, regno + k);
- SET_REGNO_REG_SET (&new->dead_or_set, regno + k);
+ SET_REGNO_REG_SET (&new_chain->dead_or_set, regno + k);
n_regs_saved--;
}
static int
insert_save (struct insn_chain *chain, int before_p, int regno,
- HARD_REG_SET (*to_save), enum machine_mode *save_mode)
+ HARD_REG_SET (*to_save), machine_mode *save_mode)
{
int i;
unsigned int k;
rtx pat = NULL_RTX;
int code;
unsigned int numregs = 0;
- struct insn_chain *new;
+ struct insn_chain *new_chain;
rtx mem;
/* A common failure mode if register status is not correct in the
mem = regno_save_mem [regno][numregs];
if (save_mode [regno] != VOIDmode
&& save_mode [regno] != GET_MODE (mem)
- && numregs == (unsigned int) hard_regno_nregs[regno][save_mode [regno]])
- mem = adjust_address (mem, save_mode[regno], 0);
+ && numregs == (unsigned int) hard_regno_nregs[regno][save_mode [regno]]
+ /* Check that insn to save REGNO in save_mode[regno] is
+ correct. */
+ && reg_save_code (regno, save_mode[regno]) >= 0)
+ mem = adjust_address_nv (mem, save_mode[regno], 0);
else
mem = copy_rtx (mem);
- pat = gen_rtx_SET (VOIDmode, mem,
- gen_rtx_REG (GET_MODE (mem),
- regno));
- code = reg_save_code[regno][GET_MODE (mem)];
- new = insert_one_insn (chain, before_p, code, pat);
+
+ /* Verify that the alignment of spill space is equal to or greater
+ than required. */
+ gcc_assert (MIN (MAX_SUPPORTED_STACK_ALIGNMENT,
+ GET_MODE_ALIGNMENT (GET_MODE (mem))) <= MEM_ALIGN (mem));
+
+ pat = gen_rtx_SET (mem, gen_rtx_REG (GET_MODE (mem), regno));
+ code = reg_save_code (regno, GET_MODE (mem));
+ new_chain = insert_one_insn (chain, before_p, code, pat);
/* Set hard_regs_saved and dead_or_set for all the registers we saved. */
for (k = 0; k < numregs; k++)
{
SET_HARD_REG_BIT (hard_regs_saved, regno + k);
- SET_REGNO_REG_SET (&new->dead_or_set, regno + k);
+ SET_REGNO_REG_SET (&new_chain->dead_or_set, regno + k);
n_regs_saved++;
}
return numregs - 1;
}
+/* A note_uses callback used by insert_one_insn. Add the hard-register
+ equivalent of each REG to regset DATA. */
+
+static void
+add_used_regs (rtx *loc, void *data)
+{
+ subrtx_iterator::array_type array;
+ FOR_EACH_SUBRTX (iter, array, *loc, NONCONST)
+ {
+ const_rtx x = *iter;
+ if (REG_P (x))
+ {
+ unsigned int regno = REGNO (x);
+ if (HARD_REGISTER_NUM_P (regno))
+ bitmap_set_range ((regset) data, regno,
+ hard_regno_nregs[regno][GET_MODE (x)]);
+ else
+ gcc_checking_assert (reg_renumber[regno] < 0);
+ }
+ }
+}
+
/* Emit a new caller-save insn and set the code. */
static struct insn_chain *
insert_one_insn (struct insn_chain *chain, int before_p, int code, rtx pat)
{
- rtx insn = chain->insn;
- struct insn_chain *new;
+ rtx_insn *insn = chain->insn;
+ struct insn_chain *new_chain;
-#ifdef HAVE_cc0
/* If INSN references CC0, put our insns in front of the insn that sets
CC0. This is always safe, since the only way we could be passed an
insn that references CC0 is for a restore, and doing a restore earlier
isn't a problem. We do, however, assume here that CALL_INSNs don't
reference CC0. Guard against non-INSN's like CODE_LABEL. */
- if ((NONJUMP_INSN_P (insn) || JUMP_P (insn))
+ if (HAVE_cc0 && (NONJUMP_INSN_P (insn) || JUMP_P (insn))
&& before_p
&& reg_referenced_p (cc0_rtx, PATTERN (insn)))
chain = chain->prev, insn = chain->insn;
-#endif
- new = new_insn_chain ();
+ new_chain = new_insn_chain ();
if (before_p)
{
rtx link;
- new->prev = chain->prev;
- if (new->prev != 0)
- new->prev->next = new;
+ new_chain->prev = chain->prev;
+ if (new_chain->prev != 0)
+ new_chain->prev->next = new_chain;
else
- reload_insn_chain = new;
+ reload_insn_chain = new_chain;
- chain->prev = new;
- new->next = chain;
- new->insn = emit_insn_before (pat, insn);
+ chain->prev = new_chain;
+ new_chain->next = chain;
+ new_chain->insn = emit_insn_before (pat, insn);
/* ??? It would be nice if we could exclude the already / still saved
registers from the live sets. */
- COPY_REG_SET (&new->live_throughout, &chain->live_throughout);
- /* Registers that die in CHAIN->INSN still live in the new insn. */
- for (link = REG_NOTES (chain->insn); link; link = XEXP (link, 1))
- {
- if (REG_NOTE_KIND (link) == REG_DEAD)
- {
- rtx reg = XEXP (link, 0);
- int regno, i;
-
- gcc_assert (REG_P (reg));
- regno = REGNO (reg);
- if (regno >= FIRST_PSEUDO_REGISTER)
- regno = reg_renumber[regno];
- if (regno < 0)
- continue;
- for (i = hard_regno_nregs[regno][GET_MODE (reg)] - 1;
- i >= 0; i--)
- SET_REGNO_REG_SET (&new->live_throughout, regno + i);
- }
- }
- CLEAR_REG_SET (&new->dead_or_set);
- if (chain->insn == BB_HEAD (BASIC_BLOCK (chain->block)))
- BB_HEAD (BASIC_BLOCK (chain->block)) = new->insn;
+ COPY_REG_SET (&new_chain->live_throughout, &chain->live_throughout);
+ note_uses (&PATTERN (chain->insn), add_used_regs,
+ &new_chain->live_throughout);
+ /* If CHAIN->INSN is a call, then the registers which contain
+ the arguments to the function are live in the new insn. */
+ if (CALL_P (chain->insn))
+ for (link = CALL_INSN_FUNCTION_USAGE (chain->insn);
+ link != NULL_RTX;
+ link = XEXP (link, 1))
+ note_uses (&XEXP (link, 0), add_used_regs,
+ &new_chain->live_throughout);
+
+ CLEAR_REG_SET (&new_chain->dead_or_set);
+ if (chain->insn == BB_HEAD (BASIC_BLOCK_FOR_FN (cfun, chain->block)))
+ BB_HEAD (BASIC_BLOCK_FOR_FN (cfun, chain->block)) = new_chain->insn;
}
else
{
- new->next = chain->next;
- if (new->next != 0)
- new->next->prev = new;
- chain->next = new;
- new->prev = chain;
- new->insn = emit_insn_after (pat, insn);
+ new_chain->next = chain->next;
+ if (new_chain->next != 0)
+ new_chain->next->prev = new_chain;
+ chain->next = new_chain;
+ new_chain->prev = chain;
+ new_chain->insn = emit_insn_after (pat, insn);
/* ??? It would be nice if we could exclude the already / still saved
registers from the live sets, and observe REG_UNUSED notes. */
- COPY_REG_SET (&new->live_throughout, &chain->live_throughout);
+ COPY_REG_SET (&new_chain->live_throughout, &chain->live_throughout);
/* Registers that are set in CHAIN->INSN live in the new insn.
(Unless there is a REG_UNUSED note for them, but we don't
look for them here.) */
note_stores (PATTERN (chain->insn), add_stored_regs,
- &new->live_throughout);
- CLEAR_REG_SET (&new->dead_or_set);
- if (chain->insn == BB_END (BASIC_BLOCK (chain->block)))
- BB_END (BASIC_BLOCK (chain->block)) = new->insn;
+ &new_chain->live_throughout);
+ CLEAR_REG_SET (&new_chain->dead_or_set);
+ if (chain->insn == BB_END (BASIC_BLOCK_FOR_FN (cfun, chain->block)))
+ BB_END (BASIC_BLOCK_FOR_FN (cfun, chain->block)) = new_chain->insn;
}
- new->block = chain->block;
- new->is_caller_save_insn = 1;
+ new_chain->block = chain->block;
+ new_chain->is_caller_save_insn = 1;
- INSN_CODE (new->insn) = code;
- return new;
+ INSN_CODE (new_chain->insn) = code;
+ return new_chain;
}
+#include "gt-caller-save.h"