/* Subroutines for insn-output.c for Motorola 68000 family.
- Copyright (C) 1987, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2003
+ Copyright (C) 1987, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+ 2001, 2003, 2004, 2005, 2006
Free Software Foundation, Inc.
This file is part of GCC.
You should have received a copy of the GNU General Public License
along with GCC; see the file COPYING. If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA. */
+the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA. */
#include "config.h"
#include "system.h"
#include "target.h"
#include "target-def.h"
#include "debug.h"
-
-/* Needed for use_return_insn. */
#include "flags.h"
-/* This flag is used to communicate between movhi and ASM_OUTPUT_CASE_END,
- if SGS_SWITCH_TABLE. */
-int switch_table_difference_label_flag;
+enum reg_class regno_reg_class[] =
+{
+ DATA_REGS, DATA_REGS, DATA_REGS, DATA_REGS,
+ DATA_REGS, DATA_REGS, DATA_REGS, DATA_REGS,
+ ADDR_REGS, ADDR_REGS, ADDR_REGS, ADDR_REGS,
+ ADDR_REGS, ADDR_REGS, ADDR_REGS, ADDR_REGS,
+ FP_REGS, FP_REGS, FP_REGS, FP_REGS,
+ FP_REGS, FP_REGS, FP_REGS, FP_REGS,
+ ADDR_REGS
+};
+
+
+/* The ASM_DOT macro allows easy string pasting to handle the differences
+ between MOTOROLA and MIT syntaxes in asm_fprintf(), which doesn't
+ support the %. option. */
+#if MOTOROLA
+# define ASM_DOT "."
+# define ASM_DOTW ".w"
+# define ASM_DOTL ".l"
+#else
+# define ASM_DOT ""
+# define ASM_DOTW ""
+# define ASM_DOTL ""
+#endif
+
+
+/* The minimum number of integer registers that we want to save with the
+ movem instruction. Using two movel instructions instead of a single
+ moveml is about 15% faster for the 68020 and 68030 at no expense in
+ code size. */
+#define MIN_MOVEM_REGS 3
+
+/* The minimum number of floating point registers that we want to save
+ with the fmovem instruction. */
+#define MIN_FMOVEM_REGS 1
+
+/* Structure describing stack frame layout. */
+struct m68k_frame
+{
+ /* Stack pointer to frame pointer offset. */
+ HOST_WIDE_INT offset;
+
+ /* Offset of FPU registers. */
+ HOST_WIDE_INT foffset;
+
+ /* Frame size in bytes (rounded up). */
+ HOST_WIDE_INT size;
+
+ /* Data and address register. */
+ int reg_no;
+ unsigned int reg_mask;
+
+ /* FPU registers. */
+ int fpu_no;
+ unsigned int fpu_mask;
+
+ /* Offsets relative to ARG_POINTER. */
+ HOST_WIDE_INT frame_pointer_offset;
+ HOST_WIDE_INT stack_pointer_offset;
+
+ /* Function which the above information refers to. */
+ int funcdef_no;
+};
+/* Current frame information calculated by m68k_compute_frame_layout(). */
+static struct m68k_frame current_frame;
+
+/* Structure describing an m68k address.
+
+ If CODE is UNKNOWN, the address is BASE + INDEX * SCALE + OFFSET,
+ with null fields evaluating to 0. Here:
+
+ - BASE satisfies m68k_legitimate_base_reg_p
+ - INDEX satisfies m68k_legitimate_index_reg_p
+ - OFFSET satisfies m68k_legitimate_constant_address_p
+
+ INDEX is either HImode or SImode. The other fields are SImode.
+
+ If CODE is PRE_DEC, the address is -(BASE). If CODE is POST_INC,
+ the address is (BASE)+. */
+struct m68k_address {
+ enum rtx_code code;
+ rtx base;
+ rtx index;
+ rtx offset;
+ int scale;
+};
+
+static bool m68k_handle_option (size_t, const char *, int);
static rtx find_addr_reg (rtx);
static const char *singlemove_string (rtx *);
-static void m68k_output_function_prologue (FILE *, HOST_WIDE_INT);
-static void m68k_output_function_epilogue (FILE *, HOST_WIDE_INT);
#ifdef M68K_TARGET_COFF
-static void m68k_coff_asm_named_section (const char *, unsigned int);
+static void m68k_coff_asm_named_section (const char *, unsigned int, tree);
#endif /* M68K_TARGET_COFF */
-#ifdef HPUX_ASM
-static void m68k_hp320_internal_label (FILE *, const char *, unsigned long);
-static void m68k_hp320_file_start (void);
-#endif
static void m68k_output_mi_thunk (FILE *, tree, HOST_WIDE_INT,
HOST_WIDE_INT, tree);
-static int m68k_save_reg (unsigned int);
-static int const_int_cost (rtx);
+static rtx m68k_struct_value_rtx (tree, int);
+static tree m68k_handle_fndecl_attribute (tree *node, tree name,
+ tree args, int flags,
+ bool *no_add_attrs);
+static void m68k_compute_frame_layout (void);
+static bool m68k_save_reg (unsigned int regno, bool interrupt_handler);
+static bool m68k_ok_for_sibcall_p (tree, tree);
static bool m68k_rtx_costs (rtx, int, int, int *);
\f
-/* Alignment to use for loops and jumps */
-/* Specify power of two alignment used for loops. */
-const char *m68k_align_loops_string;
-/* Specify power of two alignment used for non-loop jumps. */
-const char *m68k_align_jumps_string;
-/* Specify power of two alignment used for functions. */
-const char *m68k_align_funcs_string;
-
-/* Specify power of two alignment used for loops. */
-int m68k_align_loops;
-/* Specify power of two alignment used for non-loop jumps. */
-int m68k_align_jumps;
-/* Specify power of two alignment used for functions. */
-int m68k_align_funcs;
+/* Specify the identification number of the library being built */
+const char *m68k_library_id_string = "_current_shared_library_a5_offset_";
/* Nonzero if the last compare/test insn had FP operands. The
sCC expanders peek at this to determine what to do for the
#undef TARGET_ASM_UNALIGNED_SI_OP
#define TARGET_ASM_UNALIGNED_SI_OP TARGET_ASM_ALIGNED_SI_OP
-#undef TARGET_ASM_FUNCTION_PROLOGUE
-#define TARGET_ASM_FUNCTION_PROLOGUE m68k_output_function_prologue
-#undef TARGET_ASM_FUNCTION_EPILOGUE
-#define TARGET_ASM_FUNCTION_EPILOGUE m68k_output_function_epilogue
-#ifdef HPUX_ASM
-#undef TARGET_ASM_INTERNAL_LABEL
-#define TARGET_ASM_INTERNAL_LABEL m68k_hp320_internal_label
-#endif
-
#undef TARGET_ASM_OUTPUT_MI_THUNK
#define TARGET_ASM_OUTPUT_MI_THUNK m68k_output_mi_thunk
#undef TARGET_ASM_CAN_OUTPUT_MI_THUNK
-#define TARGET_ASM_CAN_OUTPUT_MI_THUNK default_can_output_mi_thunk_no_vcall
+#define TARGET_ASM_CAN_OUTPUT_MI_THUNK hook_bool_tree_hwi_hwi_tree_true
#undef TARGET_ASM_FILE_START_APP_OFF
#define TARGET_ASM_FILE_START_APP_OFF true
+#undef TARGET_DEFAULT_TARGET_FLAGS
+#define TARGET_DEFAULT_TARGET_FLAGS MASK_STRICT_ALIGNMENT
+#undef TARGET_HANDLE_OPTION
+#define TARGET_HANDLE_OPTION m68k_handle_option
+
#undef TARGET_RTX_COSTS
#define TARGET_RTX_COSTS m68k_rtx_costs
+#undef TARGET_ATTRIBUTE_TABLE
+#define TARGET_ATTRIBUTE_TABLE m68k_attribute_table
+
+#undef TARGET_PROMOTE_PROTOTYPES
+#define TARGET_PROMOTE_PROTOTYPES hook_bool_tree_true
+
+#undef TARGET_STRUCT_VALUE_RTX
+#define TARGET_STRUCT_VALUE_RTX m68k_struct_value_rtx
+
+#undef TARGET_CANNOT_FORCE_CONST_MEM
+#define TARGET_CANNOT_FORCE_CONST_MEM m68k_illegitimate_symbolic_constant_p
+
+#undef TARGET_FUNCTION_OK_FOR_SIBCALL
+#define TARGET_FUNCTION_OK_FOR_SIBCALL m68k_ok_for_sibcall_p
+
+static const struct attribute_spec m68k_attribute_table[] =
+{
+ /* { name, min_len, max_len, decl_req, type_req, fn_type_req, handler } */
+ { "interrupt_handler", 0, 0, true, false, false, m68k_handle_fndecl_attribute },
+ { "interrupt_thread", 0, 0, true, false, false, m68k_handle_fndecl_attribute },
+ { NULL, 0, 0, false, false, false, NULL }
+};
+
struct gcc_target targetm = TARGET_INITIALIZER;
\f
+/* Base flags for 68k ISAs. */
+#define FL_FOR_isa_00 FL_ISA_68000
+#define FL_FOR_isa_10 (FL_FOR_isa_00 | FL_ISA_68010)
+/* FL_68881 controls the default setting of -m68881. gcc has traditionally
+ generated 68881 code for 68020 and 68030 targets unless explicitly told
+ not to. */
+#define FL_FOR_isa_20 (FL_FOR_isa_10 | FL_ISA_68020 \
+ | FL_BITFIELD | FL_68881)
+#define FL_FOR_isa_40 (FL_FOR_isa_20 | FL_ISA_68040)
+#define FL_FOR_isa_cpu32 (FL_FOR_isa_10 | FL_ISA_68020)
+
+/* Base flags for ColdFire ISAs. */
+#define FL_FOR_isa_a (FL_COLDFIRE | FL_ISA_A)
+#define FL_FOR_isa_aplus (FL_FOR_isa_a | FL_ISA_APLUS | FL_CF_USP)
+/* Note ISA_B doesn't necessarily include USP (user stack pointer) support. */
+#define FL_FOR_isa_b (FL_FOR_isa_a | FL_ISA_B | FL_CF_HWDIV)
+#define FL_FOR_isa_c (FL_FOR_isa_b | FL_ISA_C | FL_CF_USP)
+
+enum m68k_isa
+{
+ /* Traditional 68000 instruction sets. */
+ isa_00,
+ isa_10,
+ isa_20,
+ isa_40,
+ isa_cpu32,
+ /* ColdFire instruction set variants. */
+ isa_a,
+ isa_aplus,
+ isa_b,
+ isa_c,
+ isa_max
+};
+
+/* Information about one of the -march, -mcpu or -mtune arguments. */
+struct m68k_target_selection
+{
+ /* The argument being described. */
+ const char *name;
+
+ /* For -mcpu, this is the device selected by the option.
+ For -mtune and -march, it is a representative device
+ for the microarchitecture or ISA respectively. */
+ enum target_device device;
+
+ /* The M68K_DEVICE fields associated with DEVICE. See the comment
+ in m68k-devices.def for details. FAMILY is only valid for -mcpu. */
+ const char *family;
+ enum uarch_type microarch;
+ enum m68k_isa isa;
+ unsigned long flags;
+};
+
+/* A list of all devices in m68k-devices.def. Used for -mcpu selection. */
+static const struct m68k_target_selection all_devices[] =
+{
+#define M68K_DEVICE(NAME,ENUM_VALUE,FAMILY,MULTILIB,MICROARCH,ISA,FLAGS) \
+ { NAME, ENUM_VALUE, FAMILY, u##MICROARCH, ISA, FLAGS | FL_FOR_##ISA },
+#include "m68k-devices.def"
+#undef M68K_DEVICE
+ { NULL, unk_device, NULL, unk_arch, isa_max, 0 }
+};
+
+/* A list of all ISAs, mapping each one to a representative device.
+ Used for -march selection. */
+static const struct m68k_target_selection all_isas[] =
+{
+ { "68000", m68000, NULL, u68000, isa_00, FL_FOR_isa_00 },
+ { "68010", m68010, NULL, u68010, isa_10, FL_FOR_isa_10 },
+ { "68020", m68020, NULL, u68020, isa_20, FL_FOR_isa_20 },
+ { "68030", m68030, NULL, u68030, isa_20, FL_FOR_isa_20 },
+ { "68040", m68040, NULL, u68040, isa_40, FL_FOR_isa_40 },
+ { "68060", m68060, NULL, u68060, isa_40, FL_FOR_isa_40 },
+ { "cpu32", cpu32, NULL, ucpu32, isa_20, FL_FOR_isa_cpu32 },
+ { "isaa", mcf5206e, NULL, ucfv2, isa_a, (FL_FOR_isa_a
+ | FL_CF_HWDIV) },
+ { "isaaplus", mcf5271, NULL, ucfv2, isa_aplus, (FL_FOR_isa_aplus
+ | FL_CF_HWDIV) },
+ { "isab", mcf5407, NULL, ucfv4, isa_b, FL_FOR_isa_b },
+ { "isac", unk_device, NULL, ucfv4, isa_c, (FL_FOR_isa_c
+ | FL_CF_FPU
+ | FL_CF_EMAC) },
+ { NULL, unk_device, NULL, unk_arch, isa_max, 0 }
+};
+
+/* A list of all microarchitectures, mapping each one to a representative
+ device. Used for -mtune selection. */
+static const struct m68k_target_selection all_microarchs[] =
+{
+ { "68000", m68000, NULL, u68000, isa_00, FL_FOR_isa_00 },
+ { "68010", m68010, NULL, u68010, isa_10, FL_FOR_isa_10 },
+ { "68020", m68020, NULL, u68020, isa_20, FL_FOR_isa_20 },
+ { "68020-40", m68020, NULL, u68020_40, isa_20, FL_FOR_isa_20 },
+ { "68020-60", m68020, NULL, u68020_60, isa_20, FL_FOR_isa_20 },
+ { "68030", m68030, NULL, u68030, isa_20, FL_FOR_isa_20 },
+ { "68040", m68040, NULL, u68040, isa_40, FL_FOR_isa_40 },
+ { "68060", m68060, NULL, u68060, isa_40, FL_FOR_isa_40 },
+ { "cpu32", cpu32, NULL, ucpu32, isa_20, FL_FOR_isa_cpu32 },
+ { "cfv2", mcf5206, NULL, ucfv2, isa_a, FL_FOR_isa_a },
+ { "cfv3", mcf5307, NULL, ucfv3, isa_a, (FL_FOR_isa_a
+ | FL_CF_HWDIV) },
+ { "cfv4", mcf5407, NULL, ucfv4, isa_b, FL_FOR_isa_b },
+ { "cfv4e", mcf547x, NULL, ucfv4e, isa_b, (FL_FOR_isa_b
+ | FL_CF_USP
+ | FL_CF_EMAC
+ | FL_CF_FPU) },
+ { NULL, unk_device, NULL, unk_arch, isa_max, 0 }
+};
+\f
+/* The entries associated with the -mcpu, -march and -mtune settings,
+ or null for options that have not been used. */
+const struct m68k_target_selection *m68k_cpu_entry;
+const struct m68k_target_selection *m68k_arch_entry;
+const struct m68k_target_selection *m68k_tune_entry;
+
+/* Which CPU we are generating code for. */
+enum target_device m68k_cpu;
+
+/* Which microarchitecture to tune for. */
+enum uarch_type m68k_tune;
+
+/* Which FPU to use. */
+enum fpu_type m68k_fpu;
+
+/* The set of FL_* flags that apply to the target processor. */
+unsigned int m68k_cpu_flags;
+
+/* Asm templates for calling or jumping to an arbitrary symbolic address,
+ or NULL if such calls or jumps are not supported. The address is held
+ in operand 0. */
+const char *m68k_symbolic_call;
+const char *m68k_symbolic_jump;
+\f
+/* See whether TABLE has an entry with name NAME. Return true and
+ store the entry in *ENTRY if so, otherwise return false and
+ leave *ENTRY alone. */
+
+static bool
+m68k_find_selection (const struct m68k_target_selection **entry,
+ const struct m68k_target_selection *table,
+ const char *name)
+{
+ size_t i;
+
+ for (i = 0; table[i].name; i++)
+ if (strcmp (table[i].name, name) == 0)
+ {
+ *entry = table + i;
+ return true;
+ }
+ return false;
+}
+
+/* Implement TARGET_HANDLE_OPTION. */
+
+static bool
+m68k_handle_option (size_t code, const char *arg, int value)
+{
+ switch (code)
+ {
+ case OPT_march_:
+ return m68k_find_selection (&m68k_arch_entry, all_isas, arg);
+
+ case OPT_mcpu_:
+ return m68k_find_selection (&m68k_cpu_entry, all_devices, arg);
+
+ case OPT_mtune_:
+ return m68k_find_selection (&m68k_tune_entry, all_microarchs, arg);
+
+ case OPT_m5200:
+ return m68k_find_selection (&m68k_cpu_entry, all_devices, "5206");
+
+ case OPT_m5206e:
+ return m68k_find_selection (&m68k_cpu_entry, all_devices, "5206e");
+
+ case OPT_m528x:
+ return m68k_find_selection (&m68k_cpu_entry, all_devices, "528x");
+
+ case OPT_m5307:
+ return m68k_find_selection (&m68k_cpu_entry, all_devices, "5307");
+
+ case OPT_m5407:
+ return m68k_find_selection (&m68k_cpu_entry, all_devices, "5407");
+
+ case OPT_mcfv4e:
+ return m68k_find_selection (&m68k_cpu_entry, all_devices, "547x");
+
+ case OPT_m68000:
+ case OPT_mc68000:
+ return m68k_find_selection (&m68k_cpu_entry, all_devices, "68000");
+
+ case OPT_m68010:
+ return m68k_find_selection (&m68k_cpu_entry, all_devices, "68010");
+
+ case OPT_m68020:
+ case OPT_mc68020:
+ return m68k_find_selection (&m68k_cpu_entry, all_devices, "68020");
+
+ case OPT_m68020_40:
+ return (m68k_find_selection (&m68k_tune_entry, all_microarchs,
+ "68020-40")
+ && m68k_find_selection (&m68k_cpu_entry, all_devices, "68020"));
+
+ case OPT_m68020_60:
+ return (m68k_find_selection (&m68k_tune_entry, all_microarchs,
+ "68020-60")
+ && m68k_find_selection (&m68k_cpu_entry, all_devices, "68020"));
+
+ case OPT_m68030:
+ return m68k_find_selection (&m68k_cpu_entry, all_devices, "68030");
+
+ case OPT_m68040:
+ return m68k_find_selection (&m68k_cpu_entry, all_devices, "68040");
+
+ case OPT_m68060:
+ return m68k_find_selection (&m68k_cpu_entry, all_devices, "68060");
+
+ case OPT_m68302:
+ return m68k_find_selection (&m68k_cpu_entry, all_devices, "68302");
+
+ case OPT_m68332:
+ case OPT_mcpu32:
+ return m68k_find_selection (&m68k_cpu_entry, all_devices, "68332");
+
+ case OPT_mshared_library_id_:
+ if (value > MAX_LIBRARY_ID)
+ error ("-mshared-library-id=%s is not between 0 and %d",
+ arg, MAX_LIBRARY_ID);
+ else
+ asprintf ((char **) &m68k_library_id_string, "%d", (value * -4) - 4);
+ return true;
+
+ default:
+ return true;
+ }
+}
+
/* Sometimes certain combinations of command options do not make
sense on a particular target machine. You can define a macro
`OVERRIDE_OPTIONS' to take account of this. This macro, if
void
override_options (void)
{
- int def_align;
- int i;
-
- def_align = 1;
-
- /* Validate -malign-loops= value, or provide default */
- m68k_align_loops = def_align;
- if (m68k_align_loops_string)
+ const struct m68k_target_selection *entry;
+ unsigned long target_mask;
+
+ /* User can choose:
+
+ -mcpu=
+ -march=
+ -mtune=
+
+ -march=ARCH should generate code that runs any processor
+ implementing architecture ARCH. -mcpu=CPU should override -march
+ and should generate code that runs on processor CPU, making free
+ use of any instructions that CPU understands. -mtune=UARCH applies
+ on top of -mcpu or -march and optimizes the code for UARCH. It does
+ not change the target architecture. */
+ if (m68k_cpu_entry)
{
- i = atoi (m68k_align_loops_string);
- if (i < 1 || i > MAX_CODE_ALIGN)
- error ("-malign-loops=%d is not between 1 and %d", i, MAX_CODE_ALIGN);
- else
- m68k_align_loops = i;
+ /* Complain if the -march setting is for a different microarchitecture,
+ or includes flags that the -mcpu setting doesn't. */
+ if (m68k_arch_entry
+ && (m68k_arch_entry->microarch != m68k_cpu_entry->microarch
+ || (m68k_arch_entry->flags & ~m68k_cpu_entry->flags) != 0))
+ warning (0, "-mcpu=%s conflicts with -march=%s",
+ m68k_cpu_entry->name, m68k_arch_entry->name);
+
+ entry = m68k_cpu_entry;
}
+ else
+ entry = m68k_arch_entry;
+
+ if (!entry)
+ entry = all_devices + TARGET_CPU_DEFAULT;
+
+ m68k_cpu_flags = entry->flags;
+
+ /* Use the architecture setting to derive default values for
+ certain flags. */
+ target_mask = 0;
+ if ((m68k_cpu_flags & FL_BITFIELD) != 0)
+ target_mask |= MASK_BITFIELD;
+ if ((m68k_cpu_flags & FL_CF_HWDIV) != 0)
+ target_mask |= MASK_CF_HWDIV;
+ if ((m68k_cpu_flags & (FL_68881 | FL_CF_FPU)) != 0)
+ target_mask |= MASK_HARD_FLOAT;
+ target_flags |= target_mask & ~target_flags_explicit;
+
+ /* Set the directly-usable versions of the -mcpu and -mtune settings. */
+ m68k_cpu = entry->device;
+ if (m68k_tune_entry)
+ m68k_tune = m68k_tune_entry->microarch;
+#ifdef M68K_DEFAULT_TUNE
+ else if (!m68k_cpu_entry && !m68k_arch_entry)
+ m68k_tune = M68K_DEFAULT_TUNE;
+#endif
+ else
+ m68k_tune = entry->microarch;
- /* Validate -malign-jumps= value, or provide default */
- m68k_align_jumps = def_align;
- if (m68k_align_jumps_string)
- {
- i = atoi (m68k_align_jumps_string);
- if (i < 1 || i > MAX_CODE_ALIGN)
- error ("-malign-jumps=%d is not between 1 and %d", i, MAX_CODE_ALIGN);
- else
- m68k_align_jumps = i;
- }
+ /* Set the type of FPU. */
+ m68k_fpu = (!TARGET_HARD_FLOAT ? FPUTYPE_NONE
+ : (m68k_cpu_flags & FL_COLDFIRE) != 0 ? FPUTYPE_COLDFIRE
+ : FPUTYPE_68881);
- /* Validate -malign-functions= value, or provide default */
- m68k_align_funcs = def_align;
- if (m68k_align_funcs_string)
+ if (TARGET_COLDFIRE_FPU)
{
- i = atoi (m68k_align_funcs_string);
- if (i < 1 || i > MAX_CODE_ALIGN)
- error ("-malign-functions=%d is not between 1 and %d",
- i, MAX_CODE_ALIGN);
- else
- m68k_align_funcs = i;
+ REAL_MODE_FORMAT (SFmode) = &coldfire_single_format;
+ REAL_MODE_FORMAT (DFmode) = &coldfire_double_format;
}
- /* -fPIC uses 32-bit pc-relative displacements, which don't exist
- until the 68020. */
- if (! TARGET_68020 && flag_pic == 2)
- error("-fPIC is not currently supported on the 68000 or 68010\n");
+ /* Sanity check to ensure that msep-data and mid-sahred-library are not
+ * both specified together. Doing so simply doesn't make sense.
+ */
+ if (TARGET_SEP_DATA && TARGET_ID_SHARED_LIBRARY)
+ error ("cannot specify both -msep-data and -mid-shared-library");
+
+ /* If we're generating code for a separate A5 relative data segment,
+ * we've got to enable -fPIC as well. This might be relaxable to
+ * -fpic but it hasn't been tested properly.
+ */
+ if (TARGET_SEP_DATA || TARGET_ID_SHARED_LIBRARY)
+ flag_pic = 2;
+
+ /* -mpcrel -fPIC uses 32-bit pc-relative displacements. Raise an
+ error if the target does not support them. */
+ if (TARGET_PCREL && !TARGET_68020 && flag_pic == 2)
+ error ("-mpcrel -fPIC is not currently supported on selected cpu");
/* ??? A historic way of turning on pic, or is this intended to
be an embedded thing that doesn't have the same name binding
if (TARGET_PCREL && flag_pic == 0)
flag_pic = 1;
- /* Turn off function cse if we are doing PIC. We always want function call
- to be done as `bsr foo@PLTPC', so it will force the assembler to create
- the PLT entry for `foo'. Doing function cse will cause the address of
- `foo' to be loaded into a register, which is exactly what we want to
- avoid when we are doing PIC on svr4 m68k. */
- if (flag_pic)
- flag_no_function_cse = 1;
+ if (!flag_pic)
+ {
+#if MOTOROLA && !defined (USE_GAS)
+ m68k_symbolic_call = "jsr %a0";
+ m68k_symbolic_jump = "jmp %a0";
+#else
+ m68k_symbolic_call = "jbsr %a0";
+ m68k_symbolic_jump = "jra %a0";
+#endif
+ }
+ else if (TARGET_ID_SHARED_LIBRARY)
+ /* All addresses must be loaded from the GOT. */
+ ;
+ else if (TARGET_68020 || TARGET_ISAB)
+ {
+ if (TARGET_PCREL)
+ {
+ m68k_symbolic_call = "bsr.l %c0";
+ m68k_symbolic_jump = "bra.l %c0";
+ }
+ else
+ {
+#if defined(USE_GAS)
+ m68k_symbolic_call = "bsr.l %p0";
+ m68k_symbolic_jump = "bra.l %p0";
+#else
+ m68k_symbolic_call = "bsr %p0";
+ m68k_symbolic_jump = "bra %p0";
+#endif
+ }
+ /* Turn off function cse if we are doing PIC. We always want
+ function call to be done as `bsr foo@PLTPC'. */
+ /* ??? It's traditional to do this for -mpcrel too, but it isn't
+ clear how intentional that is. */
+ flag_no_function_cse = 1;
+ }
SUBTARGET_OVERRIDE_OPTIONS;
+}
+
+/* Generate a macro of the form __mPREFIX_cpu_NAME, where PREFIX is the
+ given argument and NAME is the argument passed to -mcpu. Return NULL
+ if -mcpu was not passed. */
+
+const char *
+m68k_cpp_cpu_ident (const char *prefix)
+{
+ if (!m68k_cpu_entry)
+ return NULL;
+ return concat ("__m", prefix, "_cpu_", m68k_cpu_entry->name, NULL);
+}
+
+/* Generate a macro of the form __mPREFIX_family_NAME, where PREFIX is the
+ given argument and NAME is the name of the representative device for
+ the -mcpu argument's family. Return NULL if -mcpu was not passed. */
- /* Tell the compiler which flavor of XFmode we're using. */
- real_format_for_mode[XFmode - QFmode] = &ieee_extended_motorola_format;
+const char *
+m68k_cpp_cpu_family (const char *prefix)
+{
+ if (!m68k_cpu_entry)
+ return NULL;
+ return concat ("__m", prefix, "_family_", m68k_cpu_entry->family, NULL);
}
\f
-/* Structure describing stack frame layout. */
-struct m68k_frame {
- HOST_WIDE_INT offset;
- HOST_WIDE_INT size;
- /* data and address register */
- int reg_no;
- unsigned int reg_mask;
- unsigned int reg_rev_mask;
- /* fpu registers */
- int fpu_no;
- unsigned int fpu_mask;
- unsigned int fpu_rev_mask;
- /* fpa registers */
- int fpa_no;
- /* offsets relative to ARG_POINTER. */
- HOST_WIDE_INT frame_pointer_offset;
- HOST_WIDE_INT stack_pointer_offset;
-};
+/* Return m68k_fk_interrupt_handler if FUNC has an "interrupt_handler"
+ attribute and interrupt_thread if FUNC has an "interrupt_thread"
+ attribute. Otherwise, return m68k_fk_normal_function. */
-static void
-m68k_compute_frame_layout (struct m68k_frame *frame)
+enum m68k_function_kind
+m68k_get_function_kind (tree func)
{
- int regno, saved;
- unsigned int mask, rmask;
+ tree a;
- frame->size = (get_frame_size () + 3) & -4;
+ if (TREE_CODE (func) != FUNCTION_DECL)
+ return false;
- mask = rmask = saved = 0;
- for (regno = 0; regno < 16; regno++)
- if (m68k_save_reg (regno))
- {
- mask |= 1 << regno;
- rmask |= 1 << (15 - regno);
- saved++;
- }
- frame->offset = saved * 4;
- frame->reg_no = saved;
- frame->reg_mask = mask;
- frame->reg_rev_mask = rmask;
+ a = lookup_attribute ("interrupt_handler", DECL_ATTRIBUTES (func));
+ if (a != NULL_TREE)
+ return m68k_fk_interrupt_handler;
- if (TARGET_68881 /* || TARGET_CFV4E */)
+ a = lookup_attribute ("interrupt_thread", DECL_ATTRIBUTES (func));
+ if (a != NULL_TREE)
+ return m68k_fk_interrupt_thread;
+
+ return m68k_fk_normal_function;
+}
+
+/* Handle an attribute requiring a FUNCTION_DECL; arguments as in
+ struct attribute_spec.handler. */
+static tree
+m68k_handle_fndecl_attribute (tree *node, tree name,
+ tree args ATTRIBUTE_UNUSED,
+ int flags ATTRIBUTE_UNUSED,
+ bool *no_add_attrs)
+{
+ if (TREE_CODE (*node) != FUNCTION_DECL)
{
- mask = rmask = saved = 0;
- for (regno = 16; regno < 24; regno++)
- if (regs_ever_live[regno] && ! call_used_regs[regno])
- {
- mask |= 1 << (23 - regno);
- rmask |= 1 << (regno - 16);
- saved++;
- }
- frame->offset += saved * 12 /* (TARGET_CFV4E ? 8 : 12) */;
- frame->fpu_no = saved;
- frame->fpu_mask = mask;
- frame->fpu_rev_mask = rmask;
+ warning (OPT_Wattributes, "%qs attribute only applies to functions",
+ IDENTIFIER_POINTER (name));
+ *no_add_attrs = true;
+ }
+
+ if (m68k_get_function_kind (*node) != m68k_fk_normal_function)
+ {
+ error ("multiple interrupt attributes not allowed");
+ *no_add_attrs = true;
+ }
+
+ if (!TARGET_FIDOA
+ && !strcmp (IDENTIFIER_POINTER (name), "interrupt_thread"))
+ {
+ error ("interrupt_thread is available only on fido");
+ *no_add_attrs = true;
+ }
+
+ return NULL_TREE;
+}
+
+static void
+m68k_compute_frame_layout (void)
+{
+ int regno, saved;
+ unsigned int mask;
+ enum m68k_function_kind func_kind =
+ m68k_get_function_kind (current_function_decl);
+ bool interrupt_handler = func_kind == m68k_fk_interrupt_handler;
+ bool interrupt_thread = func_kind == m68k_fk_interrupt_thread;
+
+ /* Only compute the frame once per function.
+ Don't cache information until reload has been completed. */
+ if (current_frame.funcdef_no == current_function_funcdef_no
+ && reload_completed)
+ return;
+
+ current_frame.size = (get_frame_size () + 3) & -4;
+
+ mask = saved = 0;
+
+ /* Interrupt thread does not need to save any register. */
+ if (!interrupt_thread)
+ for (regno = 0; regno < 16; regno++)
+ if (m68k_save_reg (regno, interrupt_handler))
+ {
+ mask |= 1 << (regno - D0_REG);
+ saved++;
+ }
+ current_frame.offset = saved * 4;
+ current_frame.reg_no = saved;
+ current_frame.reg_mask = mask;
+
+ current_frame.foffset = 0;
+ mask = saved = 0;
+ if (TARGET_HARD_FLOAT)
+ {
+ /* Interrupt thread does not need to save any register. */
+ if (!interrupt_thread)
+ for (regno = 16; regno < 24; regno++)
+ if (m68k_save_reg (regno, interrupt_handler))
+ {
+ mask |= 1 << (regno - FP0_REG);
+ saved++;
+ }
+ current_frame.foffset = saved * TARGET_FP_REG_SIZE;
+ current_frame.offset += current_frame.foffset;
}
+ current_frame.fpu_no = saved;
+ current_frame.fpu_mask = mask;
+
+ /* Remember what function this frame refers to. */
+ current_frame.funcdef_no = current_function_funcdef_no;
}
HOST_WIDE_INT
m68k_initial_elimination_offset (int from, int to)
{
- struct m68k_frame frame;
-
- /* FIXME: The correct offset to compute here would appear to be
- (frame_pointer_needed ? -UNITS_PER_WORD * 2 : -UNITS_PER_WORD);
- but for some obscure reason, this must be 0 to get correct code. */
+ int argptr_offset;
+ /* The arg pointer points 8 bytes before the start of the arguments,
+ as defined by FIRST_PARM_OFFSET. This makes it coincident with the
+ frame pointer in most frames. */
+ argptr_offset = frame_pointer_needed ? 0 : UNITS_PER_WORD;
if (from == ARG_POINTER_REGNUM && to == FRAME_POINTER_REGNUM)
- return 0;
+ return argptr_offset;
- m68k_compute_frame_layout (&frame);
+ m68k_compute_frame_layout ();
- if (from == ARG_POINTER_REGNUM && to == STACK_POINTER_REGNUM)
- return frame.offset + frame.size + (frame_pointer_needed ? -UNITS_PER_WORD * 2 : -UNITS_PER_WORD);
- else if (from == FRAME_POINTER_REGNUM && to == STACK_POINTER_REGNUM)
- return frame.offset + frame.size;
-
- abort();
+ gcc_assert (to == STACK_POINTER_REGNUM);
+ switch (from)
+ {
+ case ARG_POINTER_REGNUM:
+ return current_frame.offset + current_frame.size - argptr_offset;
+ case FRAME_POINTER_REGNUM:
+ return current_frame.offset + current_frame.size;
+ default:
+ gcc_unreachable ();
+ }
}
-/* Return 1 if we need to save REGNO. */
-static int
-m68k_save_reg (unsigned int regno)
+/* Refer to the array `regs_ever_live' to determine which registers
+ to save; `regs_ever_live[I]' is nonzero if register number I
+ is ever used in the function. This function is responsible for
+ knowing which registers should not be saved even if used.
+ Return true if we need to save REGNO. */
+
+static bool
+m68k_save_reg (unsigned int regno, bool interrupt_handler)
{
- if (flag_pic && current_function_uses_pic_offset_table
- && regno == PIC_OFFSET_TABLE_REGNUM)
- return 1;
+ if (flag_pic && regno == PIC_REG)
+ {
+ /* A function that receives a nonlocal goto must save all call-saved
+ registers. */
+ if (current_function_has_nonlocal_label)
+ return true;
+ if (current_function_uses_pic_offset_table)
+ return true;
+ /* Reload may introduce constant pool references into a function
+ that thitherto didn't need a PIC register. Note that the test
+ above will not catch that case because we will only set
+ current_function_uses_pic_offset_table when emitting
+ the address reloads. */
+ if (current_function_uses_const_pool)
+ return true;
+ }
if (current_function_calls_eh_return)
{
if (test == INVALID_REGNUM)
break;
if (test == regno)
- return 1;
+ return true;
}
}
- return (regs_ever_live[regno]
- && !call_used_regs[regno]
- && !fixed_regs[regno]
- && !(regno == FRAME_POINTER_REGNUM && frame_pointer_needed));
+ /* Fixed regs we never touch. */
+ if (fixed_regs[regno])
+ return false;
+
+ /* The frame pointer (if it is such) is handled specially. */
+ if (regno == FRAME_POINTER_REGNUM && frame_pointer_needed)
+ return false;
+
+ /* Interrupt handlers must also save call_used_regs
+ if they are live or when calling nested functions. */
+ if (interrupt_handler)
+ {
+ if (regs_ever_live[regno])
+ return true;
+
+ if (!current_function_is_leaf && call_used_regs[regno])
+ return true;
+ }
+
+ /* Never need to save registers that aren't touched. */
+ if (!regs_ever_live[regno])
+ return false;
+
+ /* Otherwise save everything that isn't call-clobbered. */
+ return !call_used_regs[regno];
}
-/* This function generates the assembly code for function entry.
- STREAM is a stdio stream to output the code to.
- SIZE is an int: how many units of temporary storage to allocate.
- Refer to the array `regs_ever_live' to determine which registers
- to save; `regs_ever_live[I]' is nonzero if register number I
- is ever used in the function. This function is responsible for
- knowing which registers should not be saved even if used. */
+/* Emit RTL for a MOVEM or FMOVEM instruction. BASE + OFFSET represents
+ the lowest memory address. COUNT is the number of registers to be
+ moved, with register REGNO + I being moved if bit I of MASK is set.
+ STORE_P specifies the direction of the move and ADJUST_STACK_P says
+ whether or not this is pre-decrement (if STORE_P) or post-increment
+ (if !STORE_P) operation. */
+static rtx
+m68k_emit_movem (rtx base, HOST_WIDE_INT offset,
+ unsigned int count, unsigned int regno,
+ unsigned int mask, bool store_p, bool adjust_stack_p)
+{
+ int i;
+ rtx body, addr, src, operands[2];
+ enum machine_mode mode;
+
+ body = gen_rtx_PARALLEL (VOIDmode, rtvec_alloc (adjust_stack_p + count));
+ mode = reg_raw_mode[regno];
+ i = 0;
+
+ if (adjust_stack_p)
+ {
+ src = plus_constant (base, (count
+ * GET_MODE_SIZE (mode)
+ * (HOST_WIDE_INT) (store_p ? -1 : 1)));
+ XVECEXP (body, 0, i++) = gen_rtx_SET (VOIDmode, base, src);
+ }
-/* Note that the order of the bit mask for fmovem is the opposite
- of the order for movem! */
+ for (; mask != 0; mask >>= 1, regno++)
+ if (mask & 1)
+ {
+ addr = plus_constant (base, offset);
+ operands[!store_p] = gen_frame_mem (mode, addr);
+ operands[store_p] = gen_rtx_REG (mode, regno);
+ XVECEXP (body, 0, i++)
+ = gen_rtx_SET (VOIDmode, operands[0], operands[1]);
+ offset += GET_MODE_SIZE (mode);
+ }
+ gcc_assert (i == XVECLEN (body, 0));
+
+ return emit_insn (body);
+}
+
+/* Make INSN a frame-related instruction. */
static void
-m68k_output_function_prologue (FILE *stream, HOST_WIDE_INT size)
+m68k_set_frame_related (rtx insn)
+{
+ rtx body;
+ int i;
+
+ RTX_FRAME_RELATED_P (insn) = 1;
+ body = PATTERN (insn);
+ if (GET_CODE (body) == PARALLEL)
+ for (i = 0; i < XVECLEN (body, 0); i++)
+ RTX_FRAME_RELATED_P (XVECEXP (body, 0, i)) = 1;
+}
+
+/* Emit RTL for the "prologue" define_expand. */
+
+void
+m68k_expand_prologue (void)
{
- register int regno;
- register int mask = 0;
- int num_saved_regs = 0;
- HOST_WIDE_INT fsize = (size + 3) & -4;
HOST_WIDE_INT fsize_with_regs;
- HOST_WIDE_INT cfa_offset = INCOMING_FRAME_SP_OFFSET;
-
+ rtx limit, src, dest, insn;
+
+ m68k_compute_frame_layout ();
+
/* If the stack limit is a symbol, we can check it here,
before actually allocating the space. */
if (current_function_limit_stack
&& GET_CODE (stack_limit_rtx) == SYMBOL_REF)
{
-#if defined (MOTOROLA)
- asm_fprintf (stream, "\tcmp.l %I%s+%wd,%Rsp\n\ttrapcs\n",
- XSTR (stack_limit_rtx, 0), fsize + 4);
-#else
- asm_fprintf (stream, "\tcmpl %I%s+%wd,%Rsp\n\ttrapcs\n",
- XSTR (stack_limit_rtx, 0), fsize + 4);
-#endif
+ limit = plus_constant (stack_limit_rtx, current_frame.size + 4);
+ if (!LEGITIMATE_CONSTANT_P (limit))
+ {
+ emit_move_insn (gen_rtx_REG (Pmode, D0_REG), limit);
+ limit = gen_rtx_REG (Pmode, D0_REG);
+ }
+ emit_insn (gen_cmpsi (stack_pointer_rtx, limit));
+ emit_insn (gen_conditional_trap (gen_rtx_LTU (VOIDmode,
+ cc0_rtx, const0_rtx),
+ const1_rtx));
}
+ fsize_with_regs = current_frame.size;
if (TARGET_COLDFIRE)
{
- /* on Coldfire add register save into initial stack frame setup, if possible */
- for (regno = 0; regno < 16; regno++)
- if (m68k_save_reg (regno))
- num_saved_regs++;
-
- if (num_saved_regs <= 2)
- num_saved_regs = 0;
+ /* ColdFire's move multiple instructions do not allow pre-decrement
+ addressing. Add the size of movem saves to the initial stack
+ allocation instead. */
+ if (current_frame.reg_no >= MIN_MOVEM_REGS)
+ fsize_with_regs += current_frame.reg_no * GET_MODE_SIZE (SImode);
+ if (current_frame.fpu_no >= MIN_FMOVEM_REGS)
+ fsize_with_regs += current_frame.fpu_no * GET_MODE_SIZE (DFmode);
}
- else
- num_saved_regs = 0;
- fsize_with_regs = fsize + num_saved_regs * 4;
-
if (frame_pointer_needed)
{
- if (fsize == 0 && TARGET_68040)
+ if (fsize_with_regs == 0 && TUNE_68040)
{
- /* on the 68040, pea + move is faster than link.w 0 */
-#ifdef MOTOROLA
- fprintf (stream, "\tpea (%s)\n\tmove.l %s,%s\n",
- reg_names[FRAME_POINTER_REGNUM],
- reg_names[STACK_POINTER_REGNUM],
- reg_names[FRAME_POINTER_REGNUM]);
-#else
- fprintf (stream, "\tpea %s@\n\tmovel %s,%s\n",
- reg_names[FRAME_POINTER_REGNUM],
- reg_names[STACK_POINTER_REGNUM],
- reg_names[FRAME_POINTER_REGNUM]);
-#endif
- }
- else if (fsize_with_regs < 0x8000)
- {
-#ifdef MOTOROLA
- asm_fprintf (stream, "\tlink.w %s,%I%wd\n",
- reg_names[FRAME_POINTER_REGNUM], -fsize_with_regs);
-#else
- asm_fprintf (stream, "\tlink %s,%I%wd\n",
- reg_names[FRAME_POINTER_REGNUM], -fsize_with_regs);
-#endif
- }
- else if (TARGET_68020)
- {
-#ifdef MOTOROLA
- asm_fprintf (stream, "\tlink.l %s,%I%wd\n",
- reg_names[FRAME_POINTER_REGNUM], -fsize_with_regs);
-#else
- asm_fprintf (stream, "\tlink %s,%I%wd\n",
- reg_names[FRAME_POINTER_REGNUM], -fsize_with_regs);
-#endif
+ /* On the 68040, two separate moves are faster than link.w 0. */
+ dest = gen_frame_mem (Pmode,
+ gen_rtx_PRE_DEC (Pmode, stack_pointer_rtx));
+ m68k_set_frame_related (emit_move_insn (dest, frame_pointer_rtx));
+ m68k_set_frame_related (emit_move_insn (frame_pointer_rtx,
+ stack_pointer_rtx));
}
+ else if (fsize_with_regs < 0x8000 || TARGET_68020)
+ m68k_set_frame_related
+ (emit_insn (gen_link (frame_pointer_rtx,
+ GEN_INT (-4 - fsize_with_regs))));
else
- {
- /* Adding negative number is faster on the 68040. */
-#ifdef MOTOROLA
- asm_fprintf (stream, "\tlink.w %s,%I0\n\tadd.l %I%wd,%Rsp\n",
- reg_names[FRAME_POINTER_REGNUM], -fsize_with_regs);
-#else
- asm_fprintf (stream, "\tlink %s,%I0\n\taddl %I%wd,%Rsp\n",
- reg_names[FRAME_POINTER_REGNUM], -fsize_with_regs);
-#endif
- }
- if (dwarf2out_do_frame ())
- {
- char *l;
- l = (char *) dwarf2out_cfi_label ();
- cfa_offset += 4;
- dwarf2out_reg_save (l, FRAME_POINTER_REGNUM, -cfa_offset);
- dwarf2out_def_cfa (l, FRAME_POINTER_REGNUM, cfa_offset);
- cfa_offset += fsize;
+ {
+ m68k_set_frame_related
+ (emit_insn (gen_link (frame_pointer_rtx, GEN_INT (-4))));
+ m68k_set_frame_related
+ (emit_insn (gen_addsi3 (stack_pointer_rtx,
+ stack_pointer_rtx,
+ GEN_INT (-fsize_with_regs))));
}
}
- else if (fsize_with_regs) /* !frame_pointer_needed */
- {
- if (fsize_with_regs < 0x8000)
- {
- if (fsize_with_regs <= 8)
- {
- if (!TARGET_COLDFIRE)
- {
- /* asm_fprintf() cannot handle %. */
-#ifdef MOTOROLA
- asm_fprintf (stream, "\tsubq.w %I%wd,%Rsp\n", fsize_with_regs);
-#else
- asm_fprintf (stream, "\tsubqw %I%wd,%Rsp\n", fsize_with_regs);
-#endif
- }
- else
- {
- /* asm_fprintf() cannot handle %. */
-#ifdef MOTOROLA
- asm_fprintf (stream, "\tsubq.l %I%wd,%Rsp\n", fsize_with_regs);
-#else
- asm_fprintf (stream, "\tsubql %I%wd,%Rsp\n", fsize_with_regs);
-#endif
- }
- }
- else if (fsize_with_regs <= 16 && TARGET_CPU32)
- {
- /* On the CPU32 it is faster to use two subqw instructions to
- subtract a small integer (8 < N <= 16) to a register. */
- /* asm_fprintf() cannot handle %. */
-#ifdef MOTOROLA
- asm_fprintf (stream,
- "\tsubq.w %I8,%Rsp\n\tsubq.w %I%wd,%Rsp\n",
- fsize_with_regs - 8);
-#else
- asm_fprintf (stream, "\tsubqw %I8,%Rsp\n\tsubqw %I%wd,%Rsp\n",
- fsize_with_regs - 8);
-#endif
- }
- else if (TARGET_68040)
- {
- /* Adding negative number is faster on the 68040. */
- /* asm_fprintf() cannot handle %. */
-#ifdef MOTOROLA
- asm_fprintf (stream, "\tadd.w %I%wd,%Rsp\n", -fsize_with_regs);
-#else
- asm_fprintf (stream, "\taddw %I%wd,%Rsp\n", -fsize_with_regs);
-#endif
- }
- else
- {
-#ifdef MOTOROLA
- asm_fprintf (stream, "\tlea (%wd,%Rsp),%Rsp\n", -fsize_with_regs);
-#else
- asm_fprintf (stream, "\tlea %Rsp@(%wd),%Rsp\n", -fsize_with_regs);
-#endif
- }
- }
- else /* fsize_with_regs >= 0x8000 */
- {
-#ifdef MOTOROLA
- asm_fprintf (stream, "\tadd.l %I%wd,%Rsp\n", -fsize_with_regs);
-#else
- asm_fprintf (stream, "\taddl %I%wd,%Rsp\n", -fsize_with_regs);
-#endif
- }
- if (dwarf2out_do_frame ())
- {
- cfa_offset += fsize + 4;
- dwarf2out_def_cfa ("", STACK_POINTER_REGNUM, cfa_offset);
- }
- } /* !frame_pointer_needed */
-
- num_saved_regs = 0;
+ else if (fsize_with_regs != 0)
+ m68k_set_frame_related
+ (emit_insn (gen_addsi3 (stack_pointer_rtx,
+ stack_pointer_rtx,
+ GEN_INT (-fsize_with_regs))));
- if (TARGET_68881)
+ if (current_frame.fpu_mask)
{
- for (regno = 16; regno < 24; regno++)
- if (m68k_save_reg (regno))
- {
- mask |= 1 << (regno - 16);
- num_saved_regs++;
- }
- if ((mask & 0xff) != 0)
+ gcc_assert (current_frame.fpu_no >= MIN_FMOVEM_REGS);
+ if (TARGET_68881)
+ m68k_set_frame_related
+ (m68k_emit_movem (stack_pointer_rtx,
+ current_frame.fpu_no * -GET_MODE_SIZE (XFmode),
+ current_frame.fpu_no, FP0_REG,
+ current_frame.fpu_mask, true, true));
+ else
{
-#ifdef MOTOROLA
- asm_fprintf (stream, "\tfmovm %I0x%x,-(%Rsp)\n", mask & 0xff);
-#else
- asm_fprintf (stream, "\tfmovem %I0x%x,%Rsp@-\n", mask & 0xff);
-#endif
- if (dwarf2out_do_frame ())
- {
- char *l = (char *) dwarf2out_cfi_label ();
- int n_regs;
-
- cfa_offset += num_saved_regs * 12;
- if (! frame_pointer_needed)
- dwarf2out_def_cfa (l, STACK_POINTER_REGNUM, cfa_offset);
- for (regno = 16, n_regs = 0; regno < 24; regno++)
- if (mask & (1 << (regno - 16)))
- dwarf2out_reg_save (l, regno,
- -cfa_offset + n_regs++ * 12);
- }
+ int offset;
+
+ /* If we're using moveml to save the integer registers,
+ the stack pointer will point to the bottom of the moveml
+ save area. Find the stack offset of the first FP register. */
+ if (current_frame.reg_no < MIN_MOVEM_REGS)
+ offset = 0;
+ else
+ offset = current_frame.reg_no * GET_MODE_SIZE (SImode);
+ m68k_set_frame_related
+ (m68k_emit_movem (stack_pointer_rtx, offset,
+ current_frame.fpu_no, FP0_REG,
+ current_frame.fpu_mask, true, false));
}
- mask = 0;
- num_saved_regs = 0;
}
- for (regno = 0; regno < 16; regno++)
- if (m68k_save_reg (regno))
- {
- mask |= 1 << (15 - regno);
- num_saved_regs++;
- }
- /* If the stack limit is not a symbol, check it here.
+ /* If the stack limit is not a symbol, check it here.
This has the disadvantage that it may be too late... */
if (current_function_limit_stack)
{
if (REG_P (stack_limit_rtx))
{
-#if defined (MOTOROLA)
- asm_fprintf (stream, "\tcmp.l %s,%Rsp\n\ttrapcs\n",
- reg_names[REGNO (stack_limit_rtx)]);
-#else
- asm_fprintf (stream, "\tcmpl %s,%Rsp\n\ttrapcs\n",
- reg_names[REGNO (stack_limit_rtx)]);
-#endif
+ emit_insn (gen_cmpsi (stack_pointer_rtx, stack_limit_rtx));
+ emit_insn (gen_conditional_trap (gen_rtx_LTU (VOIDmode,
+ cc0_rtx, const0_rtx),
+ const1_rtx));
}
else if (GET_CODE (stack_limit_rtx) != SYMBOL_REF)
- warning ("stack limit expression is not supported");
+ warning (0, "stack limit expression is not supported");
}
-
- if (num_saved_regs <= 2)
- {
- /* Store each separately in the same order moveml uses.
- Using two movel instructions instead of a single moveml
- is about 15% faster for the 68020 and 68030 at no expense
- in code size */
+ if (current_frame.reg_no < MIN_MOVEM_REGS)
+ {
+ /* Store each register separately in the same order moveml does. */
int i;
- /* Undo the work from above. */
- for (i = 0; i< 16; i++)
- if (mask & (1 << i))
+ for (i = 16; i-- > 0; )
+ if (current_frame.reg_mask & (1 << i))
{
- asm_fprintf (stream,
-#ifdef MOTOROLA
- "\t%Omove.l %s,-(%Rsp)\n",
-#else
- "\tmovel %s,%Rsp@-\n",
-#endif
- reg_names[15 - i]);
- if (dwarf2out_do_frame ())
- {
- char *l = (char *) dwarf2out_cfi_label ();
-
- cfa_offset += 4;
- if (! frame_pointer_needed)
- dwarf2out_def_cfa (l, STACK_POINTER_REGNUM, cfa_offset);
- dwarf2out_reg_save (l, 15 - i, -cfa_offset);
- }
+ src = gen_rtx_REG (SImode, D0_REG + i);
+ dest = gen_frame_mem (SImode,
+ gen_rtx_PRE_DEC (Pmode, stack_pointer_rtx));
+ m68k_set_frame_related (emit_insn (gen_movsi (dest, src)));
}
}
- else if (mask)
+ else
{
if (TARGET_COLDFIRE)
- {
- /* The coldfire does not support the predecrement form of the
- movml instruction, so we must adjust the stack pointer and
- then use the plain address register indirect mode. We also
- have to invert the register save mask to use the new mode.
-
- The required register save space was combined earlier with
- the fsize amount. Don't add it again. */
-
- int newmask = 0;
- int i;
-
- for (i = 0; i < 16; i++)
- if (mask & (1 << i))
- newmask |= (1 << (15-i));
-
-#ifdef MOTOROLA
- asm_fprintf (stream, "\tmovm.l %I0x%x,(%Rsp)\n", newmask);
-#else
- asm_fprintf (stream, "\tmoveml %I0x%x,%Rsp@\n", newmask);
-#endif
- }
+ /* The required register save space has already been allocated.
+ The first register should be stored at (%sp). */
+ m68k_set_frame_related
+ (m68k_emit_movem (stack_pointer_rtx, 0,
+ current_frame.reg_no, D0_REG,
+ current_frame.reg_mask, true, false));
else
- {
-#ifdef MOTOROLA
- asm_fprintf (stream, "\tmovm.l %I0x%x,-(%Rsp)\n", mask);
-#else
- asm_fprintf (stream, "\tmoveml %I0x%x,%Rsp@-\n", mask);
-#endif
- }
- if (dwarf2out_do_frame ())
- {
- char *l = (char *) dwarf2out_cfi_label ();
- int n_regs;
-
- cfa_offset += num_saved_regs * 4;
- if (! frame_pointer_needed)
- dwarf2out_def_cfa (l, STACK_POINTER_REGNUM, cfa_offset);
- for (regno = 0, n_regs = 0; regno < 16; regno++)
- if (mask & (1 << (15 - regno)))
- dwarf2out_reg_save (l, regno,
- -cfa_offset + n_regs++ * 4);
- }
+ m68k_set_frame_related
+ (m68k_emit_movem (stack_pointer_rtx,
+ current_frame.reg_no * -GET_MODE_SIZE (SImode),
+ current_frame.reg_no, D0_REG,
+ current_frame.reg_mask, true, true));
}
- if (flag_pic && current_function_uses_pic_offset_table)
+
+ if (flag_pic
+ && !TARGET_SEP_DATA
+ && current_function_uses_pic_offset_table)
{
-#ifdef MOTOROLA
- asm_fprintf (stream, "\t%Olea (%Rpc, %U_GLOBAL_OFFSET_TABLE_@GOTPC), %s\n",
- reg_names[PIC_OFFSET_TABLE_REGNUM]);
-#else
- asm_fprintf (stream, "\tmovel %I%U_GLOBAL_OFFSET_TABLE_, %s\n",
- reg_names[PIC_OFFSET_TABLE_REGNUM]);
- asm_fprintf (stream, "\tlea %Rpc@(0,%s:l),%s\n",
- reg_names[PIC_OFFSET_TABLE_REGNUM],
- reg_names[PIC_OFFSET_TABLE_REGNUM]);
-#endif
+ insn = emit_insn (gen_load_got (pic_offset_table_rtx));
+ REG_NOTES (insn) = gen_rtx_EXPR_LIST (REG_MAYBE_DEAD,
+ const0_rtx,
+ REG_NOTES (insn));
}
}
\f
-/* Return true if this function's epilogue can be output as RTL. */
+/* Return true if a simple (return) instruction is sufficient for this
+ instruction (i.e. if no epilogue is needed). */
-int
-use_return_insn ()
+bool
+m68k_use_return_insn (void)
{
- int regno;
-
if (!reload_completed || frame_pointer_needed || get_frame_size () != 0)
- return 0;
-
- for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++)
- if (m68k_save_reg (regno))
- return 0;
+ return false;
- return 1;
+ m68k_compute_frame_layout ();
+ return current_frame.offset == 0;
}
-/* This function generates the assembly code for function exit,
- on machines that need it.
+/* Emit RTL for the "epilogue" or "sibcall_epilogue" define_expand;
+ SIBCALL_P says which.
The function epilogue should not depend on the current stack pointer!
It should use the frame pointer only, if there is a frame pointer.
This is mandatory because of alloca; we also take advantage of it to
omit stack adjustments before returning. */
-static void
-m68k_output_function_epilogue (FILE *stream, HOST_WIDE_INT size)
+void
+m68k_expand_epilogue (bool sibcall_p)
{
- register int regno;
- register int mask, fmask;
- register int nregs;
- HOST_WIDE_INT offset, foffset;
- HOST_WIDE_INT fsize = (size + 3) & -4;
- HOST_WIDE_INT fsize_with_regs;
- int big = 0;
- rtx insn = get_last_insn ();
- int restore_from_sp = 0;
-
- /* If the last insn was a BARRIER, we don't have to write any code. */
- if (GET_CODE (insn) == NOTE)
- insn = prev_nonnote_insn (insn);
- if (insn && GET_CODE (insn) == BARRIER)
- {
- /* Output just a no-op so that debuggers don't get confused
- about which function the pc is in at this address. */
- fprintf (stream, "\tnop\n");
- return;
- }
+ HOST_WIDE_INT fsize, fsize_with_regs;
+ bool big, restore_from_sp;
-#ifdef FUNCTION_EXTRA_EPILOGUE
- FUNCTION_EXTRA_EPILOGUE (stream, size);
-#endif
- nregs = 0; fmask = 0;
- if (TARGET_68881)
- {
- for (regno = 16; regno < 24; regno++)
- if (m68k_save_reg (regno))
- {
- nregs++;
- fmask |= 1 << (23 - regno);
- }
- }
- foffset = nregs * 12;
- nregs = 0; mask = 0;
- for (regno = 0; regno < 16; regno++)
- if (m68k_save_reg (regno))
- {
- nregs++;
- mask |= 1 << regno;
- }
- offset = foffset + nregs * 4;
- /* FIXME : leaf_function_p below is too strong.
+ m68k_compute_frame_layout ();
+
+ fsize = current_frame.size;
+ big = false;
+ restore_from_sp = false;
+
+ /* FIXME : current_function_is_leaf below is too strong.
What we really need to know there is if there could be pending
stack adjustment needed at that point. */
- restore_from_sp = ! frame_pointer_needed
- || (! current_function_calls_alloca && leaf_function_p ());
+ restore_from_sp = (!frame_pointer_needed
+ || (!current_function_calls_alloca
+ && current_function_is_leaf));
/* fsize_with_regs is the size we need to adjust the sp when
- popping the frame */
+ popping the frame. */
fsize_with_regs = fsize;
+ if (TARGET_COLDFIRE && restore_from_sp)
+ {
+ /* ColdFire's move multiple instructions do not allow post-increment
+ addressing. Add the size of movem loads to the final deallocation
+ instead. */
+ if (current_frame.reg_no >= MIN_MOVEM_REGS)
+ fsize_with_regs += current_frame.reg_no * GET_MODE_SIZE (SImode);
+ if (current_frame.fpu_no >= MIN_FMOVEM_REGS)
+ fsize_with_regs += current_frame.fpu_no * GET_MODE_SIZE (DFmode);
+ }
- /* Because the ColdFire doesn't support moveml with
- complex address modes, we must adjust the stack manually
- after restoring registers. When the frame pointer isn't used,
- we can merge movem adjustment into frame unlinking
- made immediately after it. */
- if (TARGET_COLDFIRE && restore_from_sp && (nregs > 2))
- fsize_with_regs += nregs * 4;
-
- if (offset + fsize >= 0x8000
- && ! restore_from_sp
- && (mask || fmask))
+ if (current_frame.offset + fsize >= 0x8000
+ && !restore_from_sp
+ && (current_frame.reg_mask || current_frame.fpu_mask))
{
- /* Because the ColdFire doesn't support moveml with
- complex address modes we make an extra correction here */
- if (TARGET_COLDFIRE)
- {
-#ifdef MOTOROLA
- asm_fprintf (stream, "\t%Omove.l %I%d,%Ra1\n", -fsize - offset);
-#else
- asm_fprintf (stream, "\tmovel %I%d,%Ra1\n", -fsize - offset);
-#endif
- }
+ if (TARGET_COLDFIRE
+ && (current_frame.reg_no >= MIN_MOVEM_REGS
+ || current_frame.fpu_no >= MIN_FMOVEM_REGS))
+ {
+ /* ColdFire's move multiple instructions do not support the
+ (d8,Ax,Xi) addressing mode, so we're as well using a normal
+ stack-based restore. */
+ emit_move_insn (gen_rtx_REG (Pmode, A1_REG),
+ GEN_INT (-(current_frame.offset + fsize)));
+ emit_insn (gen_addsi3 (stack_pointer_rtx,
+ gen_rtx_REG (Pmode, A1_REG),
+ frame_pointer_rtx));
+ restore_from_sp = true;
+ }
else
- {
-#ifdef MOTOROLA
- asm_fprintf (stream, "\t%Omove.l %I%wd,%Ra1\n", -fsize);
-#else
- asm_fprintf (stream, "\tmovel %I%wd,%Ra1\n", -fsize);
-#endif
- }
-
- fsize = 0, big = 1;
+ {
+ emit_move_insn (gen_rtx_REG (Pmode, A1_REG), GEN_INT (-fsize));
+ fsize = 0;
+ big = true;
+ }
}
- if (nregs <= 2)
- {
- /* Restore each separately in the same order moveml does.
- Using two movel instructions instead of a single moveml
- is about 15% faster for the 68020 and 68030 at no expense
- in code size. */
+ if (current_frame.reg_no < MIN_MOVEM_REGS)
+ {
+ /* Restore each register separately in the same order moveml does. */
int i;
+ HOST_WIDE_INT offset;
- /* Undo the work from above. */
- for (i = 0; i< 16; i++)
- if (mask & (1 << i))
+ offset = current_frame.offset + fsize;
+ for (i = 0; i < 16; i++)
+ if (current_frame.reg_mask & (1 << i))
{
- if (big)
- {
-#ifdef MOTOROLA
- asm_fprintf (stream, "\t%Omove.l -%wd(%s,%Ra1.l),%s\n",
- offset + fsize,
- reg_names[FRAME_POINTER_REGNUM],
- reg_names[i]);
-#else
- asm_fprintf (stream, "\tmovel %s@(-%wd,%Ra1:l),%s\n",
- reg_names[FRAME_POINTER_REGNUM],
- offset + fsize, reg_names[i]);
-#endif
- }
- else if (restore_from_sp)
+ rtx addr;
+
+ if (big)
{
-#ifdef MOTOROLA
- asm_fprintf (stream, "\t%Omove.l (%Rsp)+,%s\n",
- reg_names[i]);
-#else
- asm_fprintf (stream, "\tmovel %Rsp@+,%s\n",
- reg_names[i]);
-#endif
+ /* Generate the address -OFFSET(%fp,%a1.l). */
+ addr = gen_rtx_REG (Pmode, A1_REG);
+ addr = gen_rtx_PLUS (Pmode, addr, frame_pointer_rtx);
+ addr = plus_constant (addr, -offset);
}
- else
- {
-#ifdef MOTOROLA
- asm_fprintf (stream, "\t%Omove.l -%wd(%s),%s\n",
- offset + fsize,
- reg_names[FRAME_POINTER_REGNUM],
- reg_names[i]);
-#else
- asm_fprintf (stream, "\tmovel %s@(-%wd),%s\n",
- reg_names[FRAME_POINTER_REGNUM],
- offset + fsize, reg_names[i]);
-#endif
- }
- offset = offset - 4;
- }
- }
- else if (mask)
- {
- /* The ColdFire requires special handling due to its limited moveml insn */
- if (TARGET_COLDFIRE)
- {
- if (big)
- {
-#ifdef MOTOROLA
- asm_fprintf (stream, "\tadd.l %s,%Ra1\n", reg_names[FRAME_POINTER_REGNUM]);
- asm_fprintf (stream, "\tmovm.l (%Ra1),%I0x%x\n", mask);
-#else
- asm_fprintf (stream, "\taddl %s,%Ra1\n", reg_names[FRAME_POINTER_REGNUM]);
- asm_fprintf (stream, "\tmoveml %Ra1@,%I0x%x\n", mask);
-#endif
- }
- else if (restore_from_sp)
- {
-#ifdef MOTOROLA
- asm_fprintf (stream, "\tmovm.l (%Rsp),%I0x%x\n", mask);
-#else
- asm_fprintf (stream, "\tmoveml %Rsp@,%I0x%x\n", mask);
-#endif
- }
- else
- {
-#ifdef MOTOROLA
- asm_fprintf (stream, "\tmovm.l -%wd(%s),%I0x%x\n",
- offset + fsize,
- reg_names[FRAME_POINTER_REGNUM],
- mask);
-#else
- asm_fprintf (stream, "\tmoveml %s@(-%wd),%I0x%x\n",
- reg_names[FRAME_POINTER_REGNUM],
- offset + fsize, mask);
-#endif
- }
- }
- else /* !TARGET_COLDFIRE */
- {
- if (big)
- {
-#ifdef MOTOROLA
- asm_fprintf (stream, "\tmovm.l -%wd(%s,%Ra1.l),%I0x%x\n",
- offset + fsize,
- reg_names[FRAME_POINTER_REGNUM],
- mask);
-#else
- asm_fprintf (stream, "\tmoveml %s@(-%wd,%Ra1:l),%I0x%x\n",
- reg_names[FRAME_POINTER_REGNUM],
- offset + fsize, mask);
-#endif
- }
- else if (restore_from_sp)
- {
-#ifdef MOTOROLA
- asm_fprintf (stream, "\tmovm.l (%Rsp)+,%I0x%x\n", mask);
-#else
- asm_fprintf (stream, "\tmoveml %Rsp@+,%I0x%x\n", mask);
-#endif
- }
- else
- {
-#ifdef MOTOROLA
- asm_fprintf (stream, "\tmovm.l -%wd(%s),%I0x%x\n",
- offset + fsize,
- reg_names[FRAME_POINTER_REGNUM],
- mask);
-#else
- asm_fprintf (stream, "\tmoveml %s@(-%wd),%I0x%x\n",
- reg_names[FRAME_POINTER_REGNUM],
- offset + fsize, mask);
-#endif
- }
- }
+ else if (restore_from_sp)
+ addr = gen_rtx_POST_INC (Pmode, stack_pointer_rtx);
+ else
+ addr = plus_constant (frame_pointer_rtx, -offset);
+ emit_move_insn (gen_rtx_REG (SImode, D0_REG + i),
+ gen_frame_mem (SImode, addr));
+ offset -= GET_MODE_SIZE (SImode);
+ }
}
- if (fmask)
+ else if (current_frame.reg_mask)
{
if (big)
- {
-#ifdef MOTOROLA
- asm_fprintf (stream, "\tfmovm -%wd(%s,%Ra1.l),%I0x%x\n",
- foffset + fsize,
- reg_names[FRAME_POINTER_REGNUM],
- fmask);
-#else
- asm_fprintf (stream, "\tfmovem %s@(-%wd,%Ra1:l),%I0x%x\n",
- reg_names[FRAME_POINTER_REGNUM],
- foffset + fsize, fmask);
-#endif
- }
+ m68k_emit_movem (gen_rtx_PLUS (Pmode,
+ gen_rtx_REG (Pmode, A1_REG),
+ frame_pointer_rtx),
+ -(current_frame.offset + fsize),
+ current_frame.reg_no, D0_REG,
+ current_frame.reg_mask, false, false);
else if (restore_from_sp)
- {
-#ifdef MOTOROLA
- asm_fprintf (stream, "\tfmovm (%Rsp)+,%I0x%x\n", fmask);
-#else
- asm_fprintf (stream, "\tfmovem %Rsp@+,%I0x%x\n", fmask);
-#endif
- }
+ m68k_emit_movem (stack_pointer_rtx, 0,
+ current_frame.reg_no, D0_REG,
+ current_frame.reg_mask, false,
+ !TARGET_COLDFIRE);
else
- {
-#ifdef MOTOROLA
- asm_fprintf (stream, "\tfmovm -%wd(%s),%I0x%x\n",
- foffset + fsize,
- reg_names[FRAME_POINTER_REGNUM],
- fmask);
-#else
- asm_fprintf (stream, "\tfmovem %s@(-%wd),%I0x%x\n",
- reg_names[FRAME_POINTER_REGNUM],
- foffset + fsize, fmask);
-#endif
- }
+ m68k_emit_movem (frame_pointer_rtx,
+ -(current_frame.offset + fsize),
+ current_frame.reg_no, D0_REG,
+ current_frame.reg_mask, false, false);
}
- if (frame_pointer_needed)
- fprintf (stream, "\tunlk %s\n",
- reg_names[FRAME_POINTER_REGNUM]);
- else if (fsize_with_regs)
+
+ if (current_frame.fpu_no > 0)
{
- if (fsize_with_regs <= 8)
+ if (big)
+ m68k_emit_movem (gen_rtx_PLUS (Pmode,
+ gen_rtx_REG (Pmode, A1_REG),
+ frame_pointer_rtx),
+ -(current_frame.foffset + fsize),
+ current_frame.fpu_no, FP0_REG,
+ current_frame.fpu_mask, false, false);
+ else if (restore_from_sp)
{
- if (!TARGET_COLDFIRE)
- {
-#ifdef MOTOROLA
- asm_fprintf (stream, "\taddq.w %I%wd,%Rsp\n", fsize_with_regs);
-#else
- asm_fprintf (stream, "\taddqw %I%wd,%Rsp\n", fsize_with_regs);
-#endif
- }
- else /* TARGET_COLDFIRE */
+ if (TARGET_COLDFIRE)
{
-#ifdef MOTOROLA
- asm_fprintf (stream, "\taddq.l %I%wd,%Rsp\n", fsize_with_regs);
-#else
- asm_fprintf (stream, "\taddql %I%wd,%Rsp\n", fsize_with_regs);
-#endif
- }
- }
- else if (fsize_with_regs <= 16 && TARGET_CPU32)
- {
- /* On the CPU32 it is faster to use two addqw instructions to
- add a small integer (8 < N <= 16) to a register. */
- /* asm_fprintf() cannot handle %. */
-#ifdef MOTOROLA
- asm_fprintf (stream, "\taddq.w %I8,%Rsp\n\taddq.w %I%wd,%Rsp\n",
- fsize_with_regs - 8);
-#else
- asm_fprintf (stream, "\taddqw %I8,%Rsp\n\taddqw %I%wd,%Rsp\n",
- fsize_with_regs - 8);
-#endif
- }
- else if (fsize_with_regs < 0x8000)
- {
- if (TARGET_68040)
- {
- /* asm_fprintf() cannot handle %. */
-#ifdef MOTOROLA
- asm_fprintf (stream, "\tadd.w %I%wd,%Rsp\n", fsize_with_regs);
-#else
- asm_fprintf (stream, "\taddw %I%wd,%Rsp\n", fsize_with_regs);
-#endif
+ int offset;
+
+ /* If we used moveml to restore the integer registers, the
+ stack pointer will still point to the bottom of the moveml
+ save area. Find the stack offset of the first FP
+ register. */
+ if (current_frame.reg_no < MIN_MOVEM_REGS)
+ offset = 0;
+ else
+ offset = current_frame.reg_no * GET_MODE_SIZE (SImode);
+ m68k_emit_movem (stack_pointer_rtx, offset,
+ current_frame.fpu_no, FP0_REG,
+ current_frame.fpu_mask, false, false);
}
else
- {
-#ifdef MOTOROLA
- asm_fprintf (stream, "\tlea (%wd,%Rsp),%Rsp\n", fsize_with_regs);
-#else
- asm_fprintf (stream, "\tlea %Rsp@(%wd),%Rsp\n", fsize_with_regs);
-#endif
- }
+ m68k_emit_movem (stack_pointer_rtx, 0,
+ current_frame.fpu_no, FP0_REG,
+ current_frame.fpu_mask, false, true);
}
else
- {
- /* asm_fprintf() cannot handle %. */
-#ifdef MOTOROLA
- asm_fprintf (stream, "\tadd.l %I%wd,%Rsp\n", fsize_with_regs);
-#else
- asm_fprintf (stream, "\taddl %I%wd,%Rsp\n", fsize_with_regs);
-#endif
- }
+ m68k_emit_movem (frame_pointer_rtx,
+ -(current_frame.foffset + fsize),
+ current_frame.fpu_no, FP0_REG,
+ current_frame.fpu_mask, false, false);
}
+
+ if (frame_pointer_needed)
+ emit_insn (gen_unlink (frame_pointer_rtx));
+ else if (fsize_with_regs)
+ emit_insn (gen_addsi3 (stack_pointer_rtx,
+ stack_pointer_rtx,
+ GEN_INT (fsize_with_regs)));
+
if (current_function_calls_eh_return)
- {
-#ifdef MOTOROLA
- asm_fprintf (stream, "\tadd.l %Ra0,%Rsp\n");
-#else
- asm_fprintf (stream, "\taddl %Ra0,%Rsp\n");
-#endif
- }
- if (current_function_pops_args)
- asm_fprintf (stream, "\trtd %I%d\n", current_function_pops_args);
- else
- fprintf (stream, "\trts\n");
-}
-\f
-/* Similar to general_operand, but exclude stack_pointer_rtx. */
+ emit_insn (gen_addsi3 (stack_pointer_rtx,
+ stack_pointer_rtx,
+ EH_RETURN_STACKADJ_RTX));
-int
-not_sp_operand (rtx op, enum machine_mode mode)
-{
- return op != stack_pointer_rtx && nonimmediate_operand (op, mode);
+ if (!sibcall_p)
+ emit_insn (gen_rtx_RETURN (VOIDmode));
}
-
+\f
/* Return true if X is a valid comparison operator for the dbcc
instruction.
It also rejects some comparisons when CC_NO_OVERFLOW is set. */
int
-valid_dbcc_comparison_p (rtx x, enum machine_mode mode ATTRIBUTE_UNUSED)
+valid_dbcc_comparison_p_2 (rtx x, enum machine_mode mode ATTRIBUTE_UNUSED)
{
switch (GET_CODE (x))
{
return cc_status.flags & CC_IN_68881;
}
+/* Implement TARGET_FUNCTION_OK_FOR_SIBCALL_P. We cannot use sibcalls
+ for nested functions because we use the static chain register for
+ indirect calls. */
+
+static bool
+m68k_ok_for_sibcall_p (tree decl ATTRIBUTE_UNUSED, tree exp)
+{
+ return TREE_OPERAND (exp, 2) == NULL;
+}
+
+/* Convert X to a legitimate function call memory reference and return the
+ result. */
+
+rtx
+m68k_legitimize_call_address (rtx x)
+{
+ gcc_assert (MEM_P (x));
+ if (call_operand (XEXP (x, 0), VOIDmode))
+ return x;
+ return replace_equiv_address (x, force_reg (Pmode, XEXP (x, 0)));
+}
+
+/* Likewise for sibling calls. */
+
+rtx
+m68k_legitimize_sibcall_address (rtx x)
+{
+ gcc_assert (MEM_P (x));
+ if (sibcall_operand (XEXP (x, 0), VOIDmode))
+ return x;
+
+ emit_move_insn (gen_rtx_REG (Pmode, STATIC_CHAIN_REGNUM), XEXP (x, 0));
+ return replace_equiv_address (x, gen_rtx_REG (Pmode, STATIC_CHAIN_REGNUM));
+}
+
/* Output a dbCC; jCC sequence. Note we do not handle the
floating point version of this sequence (Fdbcc). We also
do not handle alternative conditions when CC_NO_OVERFLOW is
switch (GET_CODE (operands[3]))
{
case EQ:
-#ifdef MOTOROLA
- output_asm_insn ("dbeq %0,%l1\n\tjbeq %l2", operands);
-#else
- output_asm_insn ("dbeq %0,%l1\n\tjeq %l2", operands);
-#endif
- break;
+ output_asm_insn (MOTOROLA
+ ? "dbeq %0,%l1\n\tjbeq %l2"
+ : "dbeq %0,%l1\n\tjeq %l2",
+ operands);
+ break;
case NE:
-#ifdef MOTOROLA
- output_asm_insn ("dbne %0,%l1\n\tjbne %l2", operands);
-#else
- output_asm_insn ("dbne %0,%l1\n\tjne %l2", operands);
-#endif
- break;
+ output_asm_insn (MOTOROLA
+ ? "dbne %0,%l1\n\tjbne %l2"
+ : "dbne %0,%l1\n\tjne %l2",
+ operands);
+ break;
case GT:
-#ifdef MOTOROLA
- output_asm_insn ("dbgt %0,%l1\n\tjbgt %l2", operands);
-#else
- output_asm_insn ("dbgt %0,%l1\n\tjgt %l2", operands);
-#endif
- break;
+ output_asm_insn (MOTOROLA
+ ? "dbgt %0,%l1\n\tjbgt %l2"
+ : "dbgt %0,%l1\n\tjgt %l2",
+ operands);
+ break;
case GTU:
-#ifdef MOTOROLA
- output_asm_insn ("dbhi %0,%l1\n\tjbhi %l2", operands);
-#else
- output_asm_insn ("dbhi %0,%l1\n\tjhi %l2", operands);
-#endif
- break;
+ output_asm_insn (MOTOROLA
+ ? "dbhi %0,%l1\n\tjbhi %l2"
+ : "dbhi %0,%l1\n\tjhi %l2",
+ operands);
+ break;
case LT:
-#ifdef MOTOROLA
- output_asm_insn ("dblt %0,%l1\n\tjblt %l2", operands);
-#else
- output_asm_insn ("dblt %0,%l1\n\tjlt %l2", operands);
-#endif
- break;
+ output_asm_insn (MOTOROLA
+ ? "dblt %0,%l1\n\tjblt %l2"
+ : "dblt %0,%l1\n\tjlt %l2",
+ operands);
+ break;
case LTU:
-#ifdef MOTOROLA
- output_asm_insn ("dbcs %0,%l1\n\tjbcs %l2", operands);
-#else
- output_asm_insn ("dbcs %0,%l1\n\tjcs %l2", operands);
-#endif
- break;
+ output_asm_insn (MOTOROLA
+ ? "dbcs %0,%l1\n\tjbcs %l2"
+ : "dbcs %0,%l1\n\tjcs %l2",
+ operands);
+ break;
case GE:
-#ifdef MOTOROLA
- output_asm_insn ("dbge %0,%l1\n\tjbge %l2", operands);
-#else
- output_asm_insn ("dbge %0,%l1\n\tjge %l2", operands);
-#endif
- break;
+ output_asm_insn (MOTOROLA
+ ? "dbge %0,%l1\n\tjbge %l2"
+ : "dbge %0,%l1\n\tjge %l2",
+ operands);
+ break;
case GEU:
-#ifdef MOTOROLA
- output_asm_insn ("dbcc %0,%l1\n\tjbcc %l2", operands);
-#else
- output_asm_insn ("dbcc %0,%l1\n\tjcc %l2", operands);
-#endif
- break;
+ output_asm_insn (MOTOROLA
+ ? "dbcc %0,%l1\n\tjbcc %l2"
+ : "dbcc %0,%l1\n\tjcc %l2",
+ operands);
+ break;
case LE:
-#ifdef MOTOROLA
- output_asm_insn ("dble %0,%l1\n\tjble %l2", operands);
-#else
- output_asm_insn ("dble %0,%l1\n\tjle %l2", operands);
-#endif
- break;
+ output_asm_insn (MOTOROLA
+ ? "dble %0,%l1\n\tjble %l2"
+ : "dble %0,%l1\n\tjle %l2",
+ operands);
+ break;
case LEU:
-#ifdef MOTOROLA
- output_asm_insn ("dbls %0,%l1\n\tjbls %l2", operands);
-#else
- output_asm_insn ("dbls %0,%l1\n\tjls %l2", operands);
-#endif
- break;
+ output_asm_insn (MOTOROLA
+ ? "dbls %0,%l1\n\tjbls %l2"
+ : "dbls %0,%l1\n\tjls %l2",
+ operands);
+ break;
default:
- abort ();
+ gcc_unreachable ();
}
/* If the decrement is to be done in SImode, then we have
switch (GET_MODE (operands[0]))
{
case SImode:
-#ifdef MOTOROLA
- output_asm_insn ("clr%.w %0\n\tsubq%.l %#1,%0\n\tjbpl %l1", operands);
-#else
- output_asm_insn ("clr%.w %0\n\tsubq%.l %#1,%0\n\tjpl %l1", operands);
-#endif
+ output_asm_insn (MOTOROLA
+ ? "clr%.w %0\n\tsubq%.l #1,%0\n\tjbpl %l1"
+ : "clr%.w %0\n\tsubq%.l #1,%0\n\tjpl %l1",
+ operands);
break;
case HImode:
break;
default:
- abort ();
+ gcc_unreachable ();
}
}
const char *
-output_scc_di(rtx op, rtx operand1, rtx operand2, rtx dest)
+output_scc_di (rtx op, rtx operand1, rtx operand2, rtx dest)
{
rtx loperands[7];
enum rtx_code op_code = GET_CODE (op);
else
loperands[3] = adjust_address (operand2, SImode, 4);
}
- loperands[4] = gen_label_rtx();
+ loperands[4] = gen_label_rtx ();
if (operand2 != const0_rtx)
{
-#ifdef MOTOROLA
-#ifdef SGS_CMP_ORDER
- output_asm_insn ("cmp%.l %0,%2\n\tjbne %l4\n\tcmp%.l %1,%3", loperands);
-#else
- output_asm_insn ("cmp%.l %2,%0\n\tjbne %l4\n\tcmp%.l %3,%1", loperands);
-#endif
-#else
-#ifdef SGS_CMP_ORDER
- output_asm_insn ("cmp%.l %0,%2\n\tjne %l4\n\tcmp%.l %1,%3", loperands);
-#else
- output_asm_insn ("cmp%.l %2,%0\n\tjne %l4\n\tcmp%.l %3,%1", loperands);
-#endif
-#endif
+ output_asm_insn (MOTOROLA
+ ? "cmp%.l %2,%0\n\tjbne %l4\n\tcmp%.l %3,%1"
+ : "cmp%.l %2,%0\n\tjne %l4\n\tcmp%.l %3,%1",
+ loperands);
}
else
{
if (TARGET_68020 || TARGET_COLDFIRE || ! ADDRESS_REG_P (loperands[0]))
output_asm_insn ("tst%.l %0", loperands);
else
- {
-#ifdef SGS_CMP_ORDER
- output_asm_insn ("cmp%.w %0,%#0", loperands);
-#else
- output_asm_insn ("cmp%.w %#0,%0", loperands);
-#endif
- }
+ output_asm_insn ("cmp%.w #0,%0", loperands);
-#ifdef MOTOROLA
- output_asm_insn ("jbne %l4", loperands);
-#else
- output_asm_insn ("jne %l4", loperands);
-#endif
+ output_asm_insn (MOTOROLA ? "jbne %l4" : "jne %l4", loperands);
if (TARGET_68020 || TARGET_COLDFIRE || ! ADDRESS_REG_P (loperands[1]))
output_asm_insn ("tst%.l %1", loperands);
else
- {
-#ifdef SGS_CMP_ORDER
- output_asm_insn ("cmp%.w %1,%#0", loperands);
-#else
- output_asm_insn ("cmp%.w %#0,%1", loperands);
-#endif
- }
+ output_asm_insn ("cmp%.w #0,%1", loperands);
}
loperands[5] = dest;
-
+
switch (op_code)
{
case EQ:
(*targetm.asm_out.internal_label) (asm_out_file, "L",
- CODE_LABEL_NUMBER (loperands[4]));
+ CODE_LABEL_NUMBER (loperands[4]));
output_asm_insn ("seq %5", loperands);
break;
case NE:
(*targetm.asm_out.internal_label) (asm_out_file, "L",
- CODE_LABEL_NUMBER (loperands[4]));
+ CODE_LABEL_NUMBER (loperands[4]));
output_asm_insn ("sne %5", loperands);
break;
case GT:
- loperands[6] = gen_label_rtx();
-#ifdef MOTOROLA
- output_asm_insn ("shi %5\n\tjbra %l6", loperands);
-#else
- output_asm_insn ("shi %5\n\tjra %l6", loperands);
-#endif
+ loperands[6] = gen_label_rtx ();
+ output_asm_insn (MOTOROLA ? "shi %5\n\tjbra %l6" : "shi %5\n\tjra %l6",
+ loperands);
(*targetm.asm_out.internal_label) (asm_out_file, "L",
- CODE_LABEL_NUMBER (loperands[4]));
+ CODE_LABEL_NUMBER (loperands[4]));
output_asm_insn ("sgt %5", loperands);
(*targetm.asm_out.internal_label) (asm_out_file, "L",
- CODE_LABEL_NUMBER (loperands[6]));
+ CODE_LABEL_NUMBER (loperands[6]));
break;
case GTU:
(*targetm.asm_out.internal_label) (asm_out_file, "L",
- CODE_LABEL_NUMBER (loperands[4]));
+ CODE_LABEL_NUMBER (loperands[4]));
output_asm_insn ("shi %5", loperands);
break;
case LT:
- loperands[6] = gen_label_rtx();
-#ifdef MOTOROLA
- output_asm_insn ("scs %5\n\tjbra %l6", loperands);
-#else
- output_asm_insn ("scs %5\n\tjra %l6", loperands);
-#endif
+ loperands[6] = gen_label_rtx ();
+ output_asm_insn (MOTOROLA ? "scs %5\n\tjbra %l6" : "scs %5\n\tjra %l6",
+ loperands);
(*targetm.asm_out.internal_label) (asm_out_file, "L",
- CODE_LABEL_NUMBER (loperands[4]));
+ CODE_LABEL_NUMBER (loperands[4]));
output_asm_insn ("slt %5", loperands);
(*targetm.asm_out.internal_label) (asm_out_file, "L",
- CODE_LABEL_NUMBER (loperands[6]));
+ CODE_LABEL_NUMBER (loperands[6]));
break;
case LTU:
(*targetm.asm_out.internal_label) (asm_out_file, "L",
- CODE_LABEL_NUMBER (loperands[4]));
+ CODE_LABEL_NUMBER (loperands[4]));
output_asm_insn ("scs %5", loperands);
break;
case GE:
- loperands[6] = gen_label_rtx();
-#ifdef MOTOROLA
- output_asm_insn ("scc %5\n\tjbra %l6", loperands);
-#else
- output_asm_insn ("scc %5\n\tjra %l6", loperands);
-#endif
+ loperands[6] = gen_label_rtx ();
+ output_asm_insn (MOTOROLA ? "scc %5\n\tjbra %l6" : "scc %5\n\tjra %l6",
+ loperands);
(*targetm.asm_out.internal_label) (asm_out_file, "L",
- CODE_LABEL_NUMBER (loperands[4]));
+ CODE_LABEL_NUMBER (loperands[4]));
output_asm_insn ("sge %5", loperands);
(*targetm.asm_out.internal_label) (asm_out_file, "L",
- CODE_LABEL_NUMBER (loperands[6]));
+ CODE_LABEL_NUMBER (loperands[6]));
break;
case GEU:
(*targetm.asm_out.internal_label) (asm_out_file, "L",
- CODE_LABEL_NUMBER (loperands[4]));
+ CODE_LABEL_NUMBER (loperands[4]));
output_asm_insn ("scc %5", loperands);
break;
case LE:
- loperands[6] = gen_label_rtx();
-#ifdef MOTOROLA
- output_asm_insn ("sls %5\n\tjbra %l6", loperands);
-#else
- output_asm_insn ("sls %5\n\tjra %l6", loperands);
-#endif
+ loperands[6] = gen_label_rtx ();
+ output_asm_insn (MOTOROLA ? "sls %5\n\tjbra %l6" : "sls %5\n\tjra %l6",
+ loperands);
(*targetm.asm_out.internal_label) (asm_out_file, "L",
- CODE_LABEL_NUMBER (loperands[4]));
+ CODE_LABEL_NUMBER (loperands[4]));
output_asm_insn ("sle %5", loperands);
(*targetm.asm_out.internal_label) (asm_out_file, "L",
- CODE_LABEL_NUMBER (loperands[6]));
+ CODE_LABEL_NUMBER (loperands[6]));
break;
case LEU:
(*targetm.asm_out.internal_label) (asm_out_file, "L",
- CODE_LABEL_NUMBER (loperands[4]));
+ CODE_LABEL_NUMBER (loperands[4]));
output_asm_insn ("sls %5", loperands);
break;
default:
- abort ();
+ gcc_unreachable ();
}
return "";
}
operands[0] = countop;
operands[1] = dataop;
- if (GET_CODE (countop) == CONST_INT)
+ if (GET_CODE (countop) == CONST_INT)
+ {
+ register int count = INTVAL (countop);
+ /* If COUNT is bigger than size of storage unit in use,
+ advance to the containing unit of same size. */
+ if (count > signpos)
+ {
+ int offset = (count & ~signpos) / 8;
+ count = count & signpos;
+ operands[1] = dataop = adjust_address (dataop, QImode, offset);
+ }
+ if (count == signpos)
+ cc_status.flags = CC_NOT_POSITIVE | CC_Z_IN_NOT_N;
+ else
+ cc_status.flags = CC_NOT_NEGATIVE | CC_Z_IN_NOT_N;
+
+ /* These three statements used to use next_insns_test_no...
+ but it appears that this should do the same job. */
+ if (count == 31
+ && next_insn_tests_no_inequality (insn))
+ return "tst%.l %1";
+ if (count == 15
+ && next_insn_tests_no_inequality (insn))
+ return "tst%.w %1";
+ if (count == 7
+ && next_insn_tests_no_inequality (insn))
+ return "tst%.b %1";
+ /* Try to use `movew to ccr' followed by the appropriate branch insn.
+ On some m68k variants unfortunately that's slower than btst.
+ On 68000 and higher, that should also work for all HImode operands. */
+ if (TUNE_CPU32 || TARGET_COLDFIRE || optimize_size)
+ {
+ if (count == 3 && DATA_REG_P (operands[1])
+ && next_insn_tests_no_inequality (insn))
+ {
+ cc_status.flags = CC_NOT_NEGATIVE | CC_Z_IN_NOT_N | CC_NO_OVERFLOW;
+ return "move%.w %1,%%ccr";
+ }
+ if (count == 2 && DATA_REG_P (operands[1])
+ && next_insn_tests_no_inequality (insn))
+ {
+ cc_status.flags = CC_NOT_NEGATIVE | CC_INVERTED | CC_NO_OVERFLOW;
+ return "move%.w %1,%%ccr";
+ }
+ /* count == 1 followed by bvc/bvs and
+ count == 0 followed by bcc/bcs are also possible, but need
+ m68k-specific CC_Z_IN_NOT_V and CC_Z_IN_NOT_C flags. */
+ }
+
+ cc_status.flags = CC_NOT_NEGATIVE;
+ }
+ return "btst %0,%1";
+}
+\f
+/* Return true if X is a legitimate base register. STRICT_P says
+ whether we need strict checking. */
+
+bool
+m68k_legitimate_base_reg_p (rtx x, bool strict_p)
+{
+ /* Allow SUBREG everywhere we allow REG. This results in better code. */
+ if (!strict_p && GET_CODE (x) == SUBREG)
+ x = SUBREG_REG (x);
+
+ return (REG_P (x)
+ && (strict_p
+ ? REGNO_OK_FOR_BASE_P (REGNO (x))
+ : !DATA_REGNO_P (REGNO (x)) && !FP_REGNO_P (REGNO (x))));
+}
+
+/* Return true if X is a legitimate index register. STRICT_P says
+ whether we need strict checking. */
+
+bool
+m68k_legitimate_index_reg_p (rtx x, bool strict_p)
+{
+ if (!strict_p && GET_CODE (x) == SUBREG)
+ x = SUBREG_REG (x);
+
+ return (REG_P (x)
+ && (strict_p
+ ? REGNO_OK_FOR_INDEX_P (REGNO (x))
+ : !FP_REGNO_P (REGNO (x))));
+}
+
+/* Return true if X is a legitimate index expression for a (d8,An,Xn) or
+ (bd,An,Xn) addressing mode. Fill in the INDEX and SCALE fields of
+ ADDRESS if so. STRICT_P says whether we need strict checking. */
+
+static bool
+m68k_decompose_index (rtx x, bool strict_p, struct m68k_address *address)
+{
+ int scale;
+
+ /* Check for a scale factor. */
+ scale = 1;
+ if ((TARGET_68020 || TARGET_COLDFIRE)
+ && GET_CODE (x) == MULT
+ && GET_CODE (XEXP (x, 1)) == CONST_INT
+ && (INTVAL (XEXP (x, 1)) == 2
+ || INTVAL (XEXP (x, 1)) == 4
+ || (INTVAL (XEXP (x, 1)) == 8
+ && (TARGET_COLDFIRE_FPU || !TARGET_COLDFIRE))))
+ {
+ scale = INTVAL (XEXP (x, 1));
+ x = XEXP (x, 0);
+ }
+
+ /* Check for a word extension. */
+ if (!TARGET_COLDFIRE
+ && GET_CODE (x) == SIGN_EXTEND
+ && GET_MODE (XEXP (x, 0)) == HImode)
+ x = XEXP (x, 0);
+
+ if (m68k_legitimate_index_reg_p (x, strict_p))
+ {
+ address->scale = scale;
+ address->index = x;
+ return true;
+ }
+
+ return false;
+}
+
+/* Return true if X is an illegitimate symbolic constant. */
+
+bool
+m68k_illegitimate_symbolic_constant_p (rtx x)
+{
+ rtx base, offset;
+
+ if (M68K_OFFSETS_MUST_BE_WITHIN_SECTIONS_P)
+ {
+ split_const (x, &base, &offset);
+ if (GET_CODE (base) == SYMBOL_REF
+ && !offset_within_block_p (base, INTVAL (offset)))
+ return true;
+ }
+ return false;
+}
+
+/* Return true if X is a legitimate constant address that can reach
+ bytes in the range [X, X + REACH). STRICT_P says whether we need
+ strict checking. */
+
+static bool
+m68k_legitimate_constant_address_p (rtx x, unsigned int reach, bool strict_p)
+{
+ rtx base, offset;
+
+ if (!CONSTANT_ADDRESS_P (x))
+ return false;
+
+ if (flag_pic
+ && !(strict_p && TARGET_PCREL)
+ && symbolic_operand (x, VOIDmode))
+ return false;
+
+ if (M68K_OFFSETS_MUST_BE_WITHIN_SECTIONS_P && reach > 1)
+ {
+ split_const (x, &base, &offset);
+ if (GET_CODE (base) == SYMBOL_REF
+ && !offset_within_block_p (base, INTVAL (offset) + reach - 1))
+ return false;
+ }
+
+ return true;
+}
+
+/* Return true if X is a LABEL_REF for a jump table. Assume that unplaced
+ labels will become jump tables. */
+
+static bool
+m68k_jump_table_ref_p (rtx x)
+{
+ if (GET_CODE (x) != LABEL_REF)
+ return false;
+
+ x = XEXP (x, 0);
+ if (!NEXT_INSN (x) && !PREV_INSN (x))
+ return true;
+
+ x = next_nonnote_insn (x);
+ return x && JUMP_TABLE_DATA_P (x);
+}
+
+/* Return true if X is a legitimate address for values of mode MODE.
+ STRICT_P says whether strict checking is needed. If the address
+ is valid, describe its components in *ADDRESS. */
+
+static bool
+m68k_decompose_address (enum machine_mode mode, rtx x,
+ bool strict_p, struct m68k_address *address)
+{
+ unsigned int reach;
+
+ memset (address, 0, sizeof (*address));
+
+ if (mode == BLKmode)
+ reach = 1;
+ else
+ reach = GET_MODE_SIZE (mode);
+
+ /* Check for (An) (mode 2). */
+ if (m68k_legitimate_base_reg_p (x, strict_p))
+ {
+ address->base = x;
+ return true;
+ }
+
+ /* Check for -(An) and (An)+ (modes 3 and 4). */
+ if ((GET_CODE (x) == PRE_DEC || GET_CODE (x) == POST_INC)
+ && m68k_legitimate_base_reg_p (XEXP (x, 0), strict_p))
+ {
+ address->code = GET_CODE (x);
+ address->base = XEXP (x, 0);
+ return true;
+ }
+
+ /* Check for (d16,An) (mode 5). */
+ if (GET_CODE (x) == PLUS
+ && GET_CODE (XEXP (x, 1)) == CONST_INT
+ && IN_RANGE (INTVAL (XEXP (x, 1)), -0x8000, 0x8000 - reach)
+ && m68k_legitimate_base_reg_p (XEXP (x, 0), strict_p))
+ {
+ address->base = XEXP (x, 0);
+ address->offset = XEXP (x, 1);
+ return true;
+ }
+
+ /* Check for GOT loads. These are (bd,An,Xn) addresses if
+ TARGET_68020 && flag_pic == 2, otherwise they are (d16,An)
+ addresses. */
+ if (flag_pic
+ && GET_CODE (x) == PLUS
+ && XEXP (x, 0) == pic_offset_table_rtx
+ && (GET_CODE (XEXP (x, 1)) == SYMBOL_REF
+ || GET_CODE (XEXP (x, 1)) == LABEL_REF))
+ {
+ address->base = XEXP (x, 0);
+ address->offset = XEXP (x, 1);
+ return true;
+ }
+
+ /* The ColdFire FPU only accepts addressing modes 2-5. */
+ if (TARGET_COLDFIRE_FPU && GET_MODE_CLASS (mode) == MODE_FLOAT)
+ return false;
+
+ /* Check for (xxx).w and (xxx).l. Also, in the TARGET_PCREL case,
+ check for (d16,PC) or (bd,PC,Xn) with a suppressed index register.
+ All these modes are variations of mode 7. */
+ if (m68k_legitimate_constant_address_p (x, reach, strict_p))
+ {
+ address->offset = x;
+ return true;
+ }
+
+ /* Check for (d8,PC,Xn), a mode 7 form. This case is needed for
+ tablejumps.
+
+ ??? do_tablejump creates these addresses before placing the target
+ label, so we have to assume that unplaced labels are jump table
+ references. It seems unlikely that we would ever generate indexed
+ accesses to unplaced labels in other cases. */
+ if (GET_CODE (x) == PLUS
+ && m68k_jump_table_ref_p (XEXP (x, 1))
+ && m68k_decompose_index (XEXP (x, 0), strict_p, address))
+ {
+ address->offset = XEXP (x, 1);
+ return true;
+ }
+
+ /* Everything hereafter deals with (d8,An,Xn.SIZE*SCALE) or
+ (bd,An,Xn.SIZE*SCALE) addresses. */
+
+ if (TARGET_68020)
+ {
+ /* Check for a nonzero base displacement. */
+ if (GET_CODE (x) == PLUS
+ && m68k_legitimate_constant_address_p (XEXP (x, 1), reach, strict_p))
+ {
+ address->offset = XEXP (x, 1);
+ x = XEXP (x, 0);
+ }
+
+ /* Check for a suppressed index register. */
+ if (m68k_legitimate_base_reg_p (x, strict_p))
+ {
+ address->base = x;
+ return true;
+ }
+
+ /* Check for a suppressed base register. Do not allow this case
+ for non-symbolic offsets as it effectively gives gcc freedom
+ to treat data registers as base registers, which can generate
+ worse code. */
+ if (address->offset
+ && symbolic_operand (address->offset, VOIDmode)
+ && m68k_decompose_index (x, strict_p, address))
+ return true;
+ }
+ else
{
- register int count = INTVAL (countop);
- /* If COUNT is bigger than size of storage unit in use,
- advance to the containing unit of same size. */
- if (count > signpos)
+ /* Check for a nonzero base displacement. */
+ if (GET_CODE (x) == PLUS
+ && GET_CODE (XEXP (x, 1)) == CONST_INT
+ && IN_RANGE (INTVAL (XEXP (x, 1)), -0x80, 0x80 - reach))
{
- int offset = (count & ~signpos) / 8;
- count = count & signpos;
- operands[1] = dataop = adjust_address (dataop, QImode, offset);
+ address->offset = XEXP (x, 1);
+ x = XEXP (x, 0);
}
- if (count == signpos)
- cc_status.flags = CC_NOT_POSITIVE | CC_Z_IN_NOT_N;
- else
- cc_status.flags = CC_NOT_NEGATIVE | CC_Z_IN_NOT_N;
+ }
- /* These three statements used to use next_insns_test_no...
- but it appears that this should do the same job. */
- if (count == 31
- && next_insn_tests_no_inequality (insn))
- return "tst%.l %1";
- if (count == 15
- && next_insn_tests_no_inequality (insn))
- return "tst%.w %1";
- if (count == 7
- && next_insn_tests_no_inequality (insn))
- return "tst%.b %1";
+ /* We now expect the sum of a base and an index. */
+ if (GET_CODE (x) == PLUS)
+ {
+ if (m68k_legitimate_base_reg_p (XEXP (x, 0), strict_p)
+ && m68k_decompose_index (XEXP (x, 1), strict_p, address))
+ {
+ address->base = XEXP (x, 0);
+ return true;
+ }
- cc_status.flags = CC_NOT_NEGATIVE;
+ if (m68k_legitimate_base_reg_p (XEXP (x, 1), strict_p)
+ && m68k_decompose_index (XEXP (x, 0), strict_p, address))
+ {
+ address->base = XEXP (x, 1);
+ return true;
+ }
}
- return "btst %0,%1";
+ return false;
}
-\f
-/* Returns true if OP is either a symbol reference or a sum of a symbol
- reference and a constant. */
+
+/* Return true if X is a legitimate address for values of mode MODE.
+ STRICT_P says whether strict checking is needed. */
bool
-symbolic_operand (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED)
+m68k_legitimate_address_p (enum machine_mode mode, rtx x, bool strict_p)
{
- switch (GET_CODE (op))
- {
- case SYMBOL_REF:
- case LABEL_REF:
- return true;
+ struct m68k_address address;
- case CONST:
- op = XEXP (op, 0);
- return ((GET_CODE (XEXP (op, 0)) == SYMBOL_REF
- || GET_CODE (XEXP (op, 0)) == LABEL_REF)
- && GET_CODE (XEXP (op, 1)) == CONST_INT);
+ return m68k_decompose_address (mode, x, strict_p, &address);
+}
-#if 0 /* Deleted, with corresponding change in m68k.h,
- so as to fit the specs. No CONST_DOUBLE is ever symbolic. */
- case CONST_DOUBLE:
- return GET_MODE (op) == mode;
-#endif
+/* Return true if X is a memory, describing its address in ADDRESS if so.
+ Apply strict checking if called during or after reload. */
- default:
- return false;
- }
+static bool
+m68k_legitimate_mem_p (rtx x, struct m68k_address *address)
+{
+ return (MEM_P (x)
+ && m68k_decompose_address (GET_MODE (x), XEXP (x, 0),
+ reload_in_progress || reload_completed,
+ address));
}
-\f
-/* Check for sign_extend or zero_extend. Used for bit-count operands. */
-int
-extend_operator(rtx x, enum machine_mode mode)
+/* Return true if X matches the 'Q' constraint. It must be a memory
+ with a base address and no constant offset or index. */
+
+bool
+m68k_matches_q_p (rtx x)
{
- if (mode != VOIDmode && GET_MODE(x) != mode)
- return 0;
- switch (GET_CODE(x))
- {
- case SIGN_EXTEND :
- case ZERO_EXTEND :
- return 1;
- default :
- return 0;
- }
+ struct m68k_address address;
+
+ return (m68k_legitimate_mem_p (x, &address)
+ && address.code == UNKNOWN
+ && address.base
+ && !address.offset
+ && !address.index);
+}
+
+/* Return true if X matches the 'U' constraint. It must be a base address
+ with a constant offset and no index. */
+
+bool
+m68k_matches_u_p (rtx x)
+{
+ struct m68k_address address;
+
+ return (m68k_legitimate_mem_p (x, &address)
+ && address.code == UNKNOWN
+ && address.base
+ && address.offset
+ && !address.index);
}
-\f
/* Legitimize PIC addresses. If the address is already
position-independent, we return ORIG. Newly generated
position-independent addresses go to REG. If we need more
/* First handle a simple SYMBOL_REF or LABEL_REF */
if (GET_CODE (orig) == SYMBOL_REF || GET_CODE (orig) == LABEL_REF)
{
- if (reg == 0)
- abort ();
+ gcc_assert (reg);
pic_ref = gen_rtx_MEM (Pmode,
gen_rtx_PLUS (Pmode,
pic_offset_table_rtx, orig));
current_function_uses_pic_offset_table = 1;
- RTX_UNCHANGING_P (pic_ref) = 1;
+ MEM_READONLY_P (pic_ref) = 1;
emit_move_insn (reg, pic_ref);
return reg;
}
{
rtx base;
- /* Make sure this is CONST has not already been legitimized */
+ /* Make sure this has not already been legitimized. */
if (GET_CODE (XEXP (orig, 0)) == PLUS
&& XEXP (XEXP (orig, 0), 0) == pic_offset_table_rtx)
return orig;
- if (reg == 0)
- abort ();
+ gcc_assert (reg);
/* legitimize both operands of the PLUS */
- if (GET_CODE (XEXP (orig, 0)) == PLUS)
- {
- base = legitimize_pic_address (XEXP (XEXP (orig, 0), 0), Pmode, reg);
- orig = legitimize_pic_address (XEXP (XEXP (orig, 0), 1), Pmode,
- base == reg ? 0 : reg);
- }
- else abort ();
+ gcc_assert (GET_CODE (XEXP (orig, 0)) == PLUS);
+
+ base = legitimize_pic_address (XEXP (XEXP (orig, 0), 0), Pmode, reg);
+ orig = legitimize_pic_address (XEXP (XEXP (orig, 0), 1), Pmode,
+ base == reg ? 0 : reg);
if (GET_CODE (orig) == CONST_INT)
return plus_constant (base, INTVAL (orig));
}
\f
-typedef enum { MOVL, SWAP, NEGW, NOTW, NOTB, MOVQ } CONST_METHOD;
+typedef enum { MOVL, SWAP, NEGW, NOTW, NOTB, MOVQ, MVS, MVZ } CONST_METHOD;
-static CONST_METHOD const_method (rtx);
+#define USE_MOVQ(i) ((unsigned) ((i) + 128) <= 255)
-#define USE_MOVQ(i) ((unsigned)((i) + 128) <= 255)
+/* Return the type of move that should be used for integer I. */
static CONST_METHOD
-const_method (rtx constant)
+const_method (HOST_WIDE_INT i)
{
- int i;
unsigned u;
- i = INTVAL (constant);
if (USE_MOVQ (i))
return MOVQ;
- /* The Coldfire doesn't have byte or word operations. */
- /* FIXME: This may not be useful for the m68060 either */
- if (!TARGET_COLDFIRE)
+ /* The ColdFire doesn't have byte or word operations. */
+ /* FIXME: This may not be useful for the m68060 either. */
+ if (!TARGET_COLDFIRE)
{
/* if -256 < N < 256 but N is not in range for a moveq
N^ff will be, so use moveq #N^ff, dreg; not.b dreg. */
/* This is the only value where neg.w is useful */
if (i == -65408)
return NEGW;
- /* Try also with swap */
- u = i;
- if (USE_MOVQ ((u >> 16) | (u << 16)))
- return SWAP;
}
+
+ /* Try also with swap. */
+ u = i;
+ if (USE_MOVQ ((u >> 16) | (u << 16)))
+ return SWAP;
+
+ if (TARGET_ISAB)
+ {
+ /* Try using MVZ/MVS with an immediate value to load constants. */
+ if (i >= 0 && i <= 65535)
+ return MVZ;
+ if (i >= -32768 && i <= 32767)
+ return MVS;
+ }
+
/* Otherwise, use move.l */
return MOVL;
}
+/* Return the cost of moving constant I into a data register. */
+
static int
-const_int_cost (rtx constant)
-{
- switch (const_method (constant))
- {
- case MOVQ :
- /* Constants between -128 and 127 are cheap due to moveq */
- return 0;
- case NOTB :
- case NOTW :
- case NEGW :
- case SWAP :
- /* Constants easily generated by moveq + not.b/not.w/neg.w/swap */
- return 1;
- case MOVL :
- return 2;
- default :
- abort ();
+const_int_cost (HOST_WIDE_INT i)
+{
+ switch (const_method (i))
+ {
+ case MOVQ:
+ /* Constants between -128 and 127 are cheap due to moveq. */
+ return 0;
+ case MVZ:
+ case MVS:
+ case NOTB:
+ case NOTW:
+ case NEGW:
+ case SWAP:
+ /* Constants easily generated by moveq + not.b/not.w/neg.w/swap. */
+ return 1;
+ case MOVL:
+ return 2;
+ default:
+ gcc_unreachable ();
}
}
if (x == const0_rtx)
*total = 0;
else
- *total = const_int_cost (x);
+ *total = const_int_cost (INTVAL (x));
return true;
case CONST:
in synth_mult on the 68020, relative to an average of the time
for add and the time for shift, taking away a little more because
sometimes move insns are needed. */
- /* div?.w is relatively cheaper on 68000 counted in COSTS_N_INSNS terms. */
-#define MULL_COST (TARGET_68060 ? 2 : TARGET_68040 ? 5 : TARGET_CFV3 ? 3 : TARGET_COLDFIRE ? 10 : 13)
-#define MULW_COST (TARGET_68060 ? 2 : TARGET_68040 ? 3 : TARGET_68020 ? 8 : \
- TARGET_CFV3 ? 2 : 5)
-#define DIVW_COST (TARGET_68020 ? 27 : TARGET_CF_HWDIV ? 11 : 12)
+ /* div?.w is relatively cheaper on 68000 counted in COSTS_N_INSNS
+ terms. */
+#define MULL_COST \
+ (TUNE_68060 ? 2 \
+ : TUNE_68040 ? 5 \
+ : TUNE_CFV2 ? 10 \
+ : TARGET_COLDFIRE ? 3 : 13)
+
+#define MULW_COST \
+ (TUNE_68060 ? 2 \
+ : TUNE_68040 ? 3 \
+ : TUNE_68000_10 || TUNE_CFV2 ? 5 \
+ : TARGET_COLDFIRE ? 2 : 8)
+
+#define DIVW_COST \
+ (TARGET_CF_HWDIV ? 11 \
+ : TUNE_68000_10 || TARGET_COLDFIRE ? 12 : 27)
case PLUS:
/* An lea costs about three times as much as a simple add. */
case ASHIFT:
case ASHIFTRT:
case LSHIFTRT:
- if (TARGET_68060)
+ if (TUNE_68060)
{
*total = COSTS_N_INSNS(1);
return true;
}
- if (! TARGET_68020 && ! TARGET_COLDFIRE)
+ if (TUNE_68000_10)
{
if (GET_CODE (XEXP (x, 1)) == CONST_INT)
{
*total = COSTS_N_INSNS (4) + (INTVAL (XEXP (x, 1)) - 16) / 2;
}
else
- *total = COSTS_N_INSNS (10); /* worst case */
+ *total = COSTS_N_INSNS (10); /* Worst case. */
return true;
}
/* A shift by a big integer takes an extra instruction. */
}
}
-const char *
+/* Return an instruction to move CONST_INT OPERANDS[1] into data register
+ OPERANDS[0]. */
+
+static const char *
output_move_const_into_data_reg (rtx *operands)
{
- int i;
+ HOST_WIDE_INT i;
i = INTVAL (operands[1]);
- switch (const_method (operands[1]))
+ switch (const_method (i))
{
- case MOVQ :
+ case MVZ:
+ return "mvzw %1,%0";
+ case MVS:
+ return "mvsw %1,%0";
+ case MOVQ:
return "moveq %1,%0";
- case NOTB :
+ case NOTB:
+ CC_STATUS_INIT;
operands[1] = GEN_INT (i ^ 0xff);
return "moveq %1,%0\n\tnot%.b %0";
- case NOTW :
+ case NOTW:
+ CC_STATUS_INIT;
operands[1] = GEN_INT (i ^ 0xffff);
return "moveq %1,%0\n\tnot%.w %0";
- case NEGW :
- return "moveq %#-128,%0\n\tneg%.w %0";
- case SWAP :
+ case NEGW:
+ CC_STATUS_INIT;
+ return "moveq #-128,%0\n\tneg%.w %0";
+ case SWAP:
{
unsigned u = i;
operands[1] = GEN_INT ((u << 16) | (u >> 16));
return "moveq %1,%0\n\tswap %0";
}
- case MOVL :
- return "move%.l %1,%0";
- default :
- abort ();
+ case MOVL:
+ return "move%.l %1,%0";
+ default:
+ gcc_unreachable ();
}
}
-const char *
+/* Return true if I can be handled by ISA B's mov3q instruction. */
+
+bool
+valid_mov3q_const (HOST_WIDE_INT i)
+{
+ return TARGET_ISAB && (i == -1 || IN_RANGE (i, 1, 7));
+}
+
+/* Return an instruction to move CONST_INT OPERANDS[1] into OPERANDS[0].
+ I is the value of OPERANDS[1]. */
+
+static const char *
output_move_simode_const (rtx *operands)
{
- if (operands[1] == const0_rtx
- && (DATA_REG_P (operands[0])
- || GET_CODE (operands[0]) == MEM)
- /* clr insns on 68000 read before writing.
- This isn't so on the 68010, but we have no TARGET_68010. */
- && ((TARGET_68020 || TARGET_COLDFIRE)
- || !(GET_CODE (operands[0]) == MEM
- && MEM_VOLATILE_P (operands[0]))))
+ rtx dest;
+ HOST_WIDE_INT src;
+
+ dest = operands[0];
+ src = INTVAL (operands[1]);
+ if (src == 0
+ && (DATA_REG_P (dest) || MEM_P (dest))
+ /* clr insns on 68000 read before writing. */
+ && ((TARGET_68010 || TARGET_COLDFIRE)
+ || !(MEM_P (dest) && MEM_VOLATILE_P (dest))))
return "clr%.l %0";
- else if (operands[1] == const0_rtx
- && ADDRESS_REG_P (operands[0]))
+ else if (GET_MODE (dest) == SImode && valid_mov3q_const (src))
+ return "mov3q%.l %1,%0";
+ else if (src == 0 && ADDRESS_REG_P (dest))
return "sub%.l %0,%0";
- else if (DATA_REG_P (operands[0]))
+ else if (DATA_REG_P (dest))
return output_move_const_into_data_reg (operands);
- else if (ADDRESS_REG_P (operands[0])
- && INTVAL (operands[1]) < 0x8000
- && INTVAL (operands[1]) >= -0x8000)
- return "move%.w %1,%0";
- else if (GET_CODE (operands[0]) == MEM
- && GET_CODE (XEXP (operands[0], 0)) == PRE_DEC
- && REGNO (XEXP (XEXP (operands[0], 0), 0)) == STACK_POINTER_REGNUM
- && INTVAL (operands[1]) < 0x8000
- && INTVAL (operands[1]) >= -0x8000)
- return "pea %a1";
+ else if (ADDRESS_REG_P (dest) && IN_RANGE (src, -0x8000, 0x7fff))
+ {
+ if (valid_mov3q_const (src))
+ return "mov3q%.l %1,%0";
+ return "move%.w %1,%0";
+ }
+ else if (MEM_P (dest)
+ && GET_CODE (XEXP (dest, 0)) == PRE_DEC
+ && REGNO (XEXP (XEXP (dest, 0), 0)) == STACK_POINTER_REGNUM
+ && IN_RANGE (src, -0x8000, 0x7fff))
+ {
+ if (valid_mov3q_const (src))
+ return "mov3q%.l %1,%-";
+ return "pea %a1";
+ }
return "move%.l %1,%0";
}
if (operands[1] == const0_rtx
&& (DATA_REG_P (operands[0])
|| GET_CODE (operands[0]) == MEM)
- /* clr insns on 68000 read before writing.
- This isn't so on the 68010, but we have no TARGET_68010. */
- && ((TARGET_68020 || TARGET_COLDFIRE)
+ /* clr insns on 68000 read before writing. */
+ && ((TARGET_68010 || TARGET_COLDFIRE)
|| !(GET_CODE (operands[0]) == MEM
&& MEM_VOLATILE_P (operands[0]))))
return "clr%.w %0";
else if (DATA_REG_P (operands[0])
&& INTVAL (operands[1]) < 128
&& INTVAL (operands[1]) >= -128)
- {
- return "moveq %1,%0";
- }
+ return "moveq %1,%0";
else if (INTVAL (operands[1]) < 0x8000
&& INTVAL (operands[1]) >= -0x8000)
return "move%.w %1,%0";
&& GET_CODE (XEXP (XEXP (operands[1], 0), 0)) != PLUS)
{
rtx labelref = XEXP (XEXP (operands[1], 0), 1);
-#if defined (MOTOROLA) && !defined (SGS_SWITCH_TABLES)
-#ifdef SGS
- asm_fprintf (asm_out_file, "\tset %LLI%d,.+2\n",
- CODE_LABEL_NUMBER (XEXP (labelref, 0)));
-#else /* not SGS */
- asm_fprintf (asm_out_file, "\t.set %LLI%d,.+2\n",
- CODE_LABEL_NUMBER (XEXP (labelref, 0)));
-#endif /* not SGS */
-#else /* SGS_SWITCH_TABLES or not MOTOROLA */
- (*targetm.asm_out.internal_label) (asm_out_file, "LI",
- CODE_LABEL_NUMBER (XEXP (labelref, 0)));
-#ifdef SGS_SWITCH_TABLES
- /* Set flag saying we need to define the symbol
- LD%n (with value L%n-LI%n) at the end of the switch table. */
- switch_table_difference_label_flag = 1;
-#endif /* SGS_SWITCH_TABLES */
-#endif /* SGS_SWITCH_TABLES or not MOTOROLA */
+ if (MOTOROLA)
+ asm_fprintf (asm_out_file, "\t.set %LLI%d,.+2\n",
+ CODE_LABEL_NUMBER (XEXP (labelref, 0)));
+ else
+ (*targetm.asm_out.internal_label) (asm_out_file, "LI",
+ CODE_LABEL_NUMBER (XEXP (labelref, 0)));
}
return "move%.w %1,%0";
}
const char *
output_move_qimode (rtx *operands)
{
- rtx xoperands[4];
-
- /* This is probably useless, since it loses for pushing a struct
- of several bytes a byte at a time. */
/* 68k family always modifies the stack pointer by at least 2, even for
- byte pushes. The 5200 (coldfire) does not do this. */
- if (GET_CODE (operands[0]) == MEM
- && GET_CODE (XEXP (operands[0], 0)) == PRE_DEC
- && XEXP (XEXP (operands[0], 0), 0) == stack_pointer_rtx
- && ! ADDRESS_REG_P (operands[1])
- && ! TARGET_COLDFIRE)
- {
- xoperands[1] = operands[1];
- xoperands[2]
- = gen_rtx_MEM (QImode,
- gen_rtx_PLUS (VOIDmode, stack_pointer_rtx, const1_rtx));
- /* Just pushing a byte puts it in the high byte of the halfword. */
- /* We must put it in the low-order, high-numbered byte. */
- if (!reg_mentioned_p (stack_pointer_rtx, operands[1]))
- {
- xoperands[3] = stack_pointer_rtx;
- output_asm_insn ("subq%.l %#2,%3\n\tmove%.b %1,%2", xoperands);
- }
- else
- output_asm_insn ("move%.b %1,%-\n\tmove%.b %@,%2", xoperands);
- return "";
- }
-
- /* clr and st insns on 68000 read before writing.
- This isn't so on the 68010, but we have no TARGET_68010. */
+ byte pushes. The 5200 (ColdFire) does not do this. */
+
+ /* This case is generated by pushqi1 pattern now. */
+ gcc_assert (!(GET_CODE (operands[0]) == MEM
+ && GET_CODE (XEXP (operands[0], 0)) == PRE_DEC
+ && XEXP (XEXP (operands[0], 0), 0) == stack_pointer_rtx
+ && ! ADDRESS_REG_P (operands[1])
+ && ! TARGET_COLDFIRE));
+
+ /* clr and st insns on 68000 read before writing. */
if (!ADDRESS_REG_P (operands[0])
- && ((TARGET_68020 || TARGET_COLDFIRE)
+ && ((TARGET_68010 || TARGET_COLDFIRE)
|| !(GET_CODE (operands[0]) == MEM && MEM_VOLATILE_P (operands[0]))))
{
if (operands[1] == const0_rtx)
&& DATA_REG_P (operands[0])
&& INTVAL (operands[1]) < 128
&& INTVAL (operands[1]) >= -128)
- {
- return "moveq %1,%0";
- }
+ return "moveq %1,%0";
if (operands[1] == const0_rtx && ADDRESS_REG_P (operands[0]))
return "sub%.l %0,%0";
if (GET_CODE (operands[1]) != CONST_INT && CONSTANT_P (operands[1]))
return "move%.l %1,%0";
- /* 68k family (including the 5200 coldfire) does not support byte moves to
+ /* 68k family (including the 5200 ColdFire) does not support byte moves to
from address registers. */
if (ADDRESS_REG_P (operands[0]) || ADDRESS_REG_P (operands[1]))
return "move%.w %1,%0";
output_move_stricthi (rtx *operands)
{
if (operands[1] == const0_rtx
- /* clr insns on 68000 read before writing.
- This isn't so on the 68010, but we have no TARGET_68010. */
- && ((TARGET_68020 || TARGET_COLDFIRE)
+ /* clr insns on 68000 read before writing. */
+ && ((TARGET_68010 || TARGET_COLDFIRE)
|| !(GET_CODE (operands[0]) == MEM && MEM_VOLATILE_P (operands[0]))))
return "clr%.w %0";
return "move%.w %1,%0";
output_move_strictqi (rtx *operands)
{
if (operands[1] == const0_rtx
- /* clr insns on 68000 read before writing.
- This isn't so on the 68010, but we have no TARGET_68010. */
- && ((TARGET_68020 || TARGET_COLDFIRE)
+ /* clr insns on 68000 read before writing. */
+ && ((TARGET_68010 || TARGET_COLDFIRE)
|| !(GET_CODE (operands[0]) == MEM && MEM_VOLATILE_P (operands[0]))))
return "clr%.b %0";
return "move%.b %1,%0";
else
optype1 = RNDOP;
- /* Check for the cases that the operand constraints are not
- supposed to allow to happen. Abort if we get one,
- because generating code for these cases is painful. */
-
- if (optype0 == RNDOP || optype1 == RNDOP)
- abort ();
+ /* Check for the cases that the operand constraints are not supposed
+ to allow to happen. Generating code for these cases is
+ painful. */
+ gcc_assert (optype0 != RNDOP && optype1 != RNDOP);
/* If one operand is decrementing and one is incrementing
decrement the former register explicitly
{
operands[0] = XEXP (XEXP (operands[0], 0), 0);
if (size == 12)
- output_asm_insn ("sub%.l %#12,%0", operands);
+ output_asm_insn ("sub%.l #12,%0", operands);
else
- output_asm_insn ("subq%.l %#8,%0", operands);
+ output_asm_insn ("subq%.l #8,%0", operands);
if (GET_MODE (operands[1]) == XFmode)
operands[0] = gen_rtx_MEM (XFmode, operands[0]);
else if (GET_MODE (operands[0]) == DFmode)
{
operands[1] = XEXP (XEXP (operands[1], 0), 0);
if (size == 12)
- output_asm_insn ("sub%.l %#12,%1", operands);
+ output_asm_insn ("sub%.l #12,%1", operands);
else
- output_asm_insn ("subq%.l %#8,%1", operands);
+ output_asm_insn ("subq%.l #8,%1", operands);
if (GET_MODE (operands[1]) == XFmode)
operands[1] = gen_rtx_MEM (XFmode, operands[1]);
else if (GET_MODE (operands[1]) == DFmode)
middlehalf[1] = GEN_INT (l[1]);
latehalf[1] = GEN_INT (l[2]);
}
- else if (CONSTANT_P (operands[1]))
+ else
{
- /* actually, no non-CONST_DOUBLE constant should ever
- appear here. */
- abort ();
- if (GET_CODE (operands[1]) == CONST_INT && INTVAL (operands[1]) < 0)
- latehalf[1] = constm1_rtx;
- else
- latehalf[1] = const0_rtx;
+ /* No non-CONST_DOUBLE constant should ever appear
+ here. */
+ gcc_assert (!CONSTANT_P (operands[1]));
}
}
else
/* If both halves of dest are used in the src memory address,
compute the address into latehalf of dest.
Note that this can't happen if the dest is two data regs. */
-compadr:
+ compadr:
xops[0] = latehalf[0];
xops[1] = XEXP (operands[1], 0);
output_asm_insn ("lea %a1,%0", xops);
goto compadr;
/* JRV says this can't happen: */
- if (addreg0 || addreg1)
- abort ();
+ gcc_assert (!addreg0 && !addreg1);
/* Only the middle reg conflicts; simply put it last. */
output_asm_insn (singlemove_string (operands), operands);
if (addreg0)
{
if (size == 12)
- output_asm_insn ("addq%.l %#8,%0", &addreg0);
+ output_asm_insn ("addq%.l #8,%0", &addreg0);
else
- output_asm_insn ("addq%.l %#4,%0", &addreg0);
+ output_asm_insn ("addq%.l #4,%0", &addreg0);
}
if (addreg1)
{
if (size == 12)
- output_asm_insn ("addq%.l %#8,%0", &addreg1);
+ output_asm_insn ("addq%.l #8,%0", &addreg1);
else
- output_asm_insn ("addq%.l %#4,%0", &addreg1);
+ output_asm_insn ("addq%.l #4,%0", &addreg1);
}
/* Do that word. */
/* Undo the adds we just did. */
if (addreg0)
- output_asm_insn ("subq%.l %#4,%0", &addreg0);
+ output_asm_insn ("subq%.l #4,%0", &addreg0);
if (addreg1)
- output_asm_insn ("subq%.l %#4,%0", &addreg1);
+ output_asm_insn ("subq%.l #4,%0", &addreg1);
if (size == 12)
{
output_asm_insn (singlemove_string (middlehalf), middlehalf);
if (addreg0)
- output_asm_insn ("subq%.l %#4,%0", &addreg0);
+ output_asm_insn ("subq%.l #4,%0", &addreg0);
if (addreg1)
- output_asm_insn ("subq%.l %#4,%0", &addreg1);
+ output_asm_insn ("subq%.l #4,%0", &addreg1);
}
/* Do low-numbered word. */
if (size == 12)
{
if (addreg0)
- output_asm_insn ("addq%.l %#4,%0", &addreg0);
+ output_asm_insn ("addq%.l #4,%0", &addreg0);
if (addreg1)
- output_asm_insn ("addq%.l %#4,%0", &addreg1);
+ output_asm_insn ("addq%.l #4,%0", &addreg1);
output_asm_insn (singlemove_string (middlehalf), middlehalf);
}
/* Make any unoffsettable addresses point at high-numbered word. */
if (addreg0)
- output_asm_insn ("addq%.l %#4,%0", &addreg0);
+ output_asm_insn ("addq%.l #4,%0", &addreg0);
+ if (addreg1)
+ output_asm_insn ("addq%.l #4,%0", &addreg1);
+
+ /* Do that word. */
+ output_asm_insn (singlemove_string (latehalf), latehalf);
+
+ /* Undo the adds we just did. */
+ if (addreg0)
+ {
+ if (size == 12)
+ output_asm_insn ("subq%.l #8,%0", &addreg0);
+ else
+ output_asm_insn ("subq%.l #4,%0", &addreg0);
+ }
if (addreg1)
- output_asm_insn ("addq%.l %#4,%0", &addreg1);
+ {
+ if (size == 12)
+ output_asm_insn ("subq%.l #8,%0", &addreg1);
+ else
+ output_asm_insn ("subq%.l #4,%0", &addreg1);
+ }
+
+ return "";
+}
+
+
+/* Ensure mode of ORIG, a REG rtx, is MODE. Returns either ORIG or a
+ new rtx with the correct mode. */
+
+static rtx
+force_mode (enum machine_mode mode, rtx orig)
+{
+ if (mode == GET_MODE (orig))
+ return orig;
+
+ if (REGNO (orig) >= FIRST_PSEUDO_REGISTER)
+ abort ();
+
+ return gen_rtx_REG (mode, REGNO (orig));
+}
+
+static int
+fp_reg_operand (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED)
+{
+ return reg_renumber && FP_REG_P (op);
+}
+
+/* Emit insns to move operands[1] into operands[0].
+
+ Return 1 if we have written out everything that needs to be done to
+ do the move. Otherwise, return 0 and the caller will emit the move
+ normally.
+
+ Note SCRATCH_REG may not be in the proper mode depending on how it
+ will be used. This routine is responsible for creating a new copy
+ of SCRATCH_REG in the proper mode. */
+
+int
+emit_move_sequence (rtx *operands, enum machine_mode mode, rtx scratch_reg)
+{
+ register rtx operand0 = operands[0];
+ register rtx operand1 = operands[1];
+ register rtx tem;
+
+ if (scratch_reg
+ && reload_in_progress && GET_CODE (operand0) == REG
+ && REGNO (operand0) >= FIRST_PSEUDO_REGISTER)
+ operand0 = reg_equiv_mem[REGNO (operand0)];
+ else if (scratch_reg
+ && reload_in_progress && GET_CODE (operand0) == SUBREG
+ && GET_CODE (SUBREG_REG (operand0)) == REG
+ && REGNO (SUBREG_REG (operand0)) >= FIRST_PSEUDO_REGISTER)
+ {
+ /* We must not alter SUBREG_BYTE (operand0) since that would confuse
+ the code which tracks sets/uses for delete_output_reload. */
+ rtx temp = gen_rtx_SUBREG (GET_MODE (operand0),
+ reg_equiv_mem [REGNO (SUBREG_REG (operand0))],
+ SUBREG_BYTE (operand0));
+ operand0 = alter_subreg (&temp);
+ }
+
+ if (scratch_reg
+ && reload_in_progress && GET_CODE (operand1) == REG
+ && REGNO (operand1) >= FIRST_PSEUDO_REGISTER)
+ operand1 = reg_equiv_mem[REGNO (operand1)];
+ else if (scratch_reg
+ && reload_in_progress && GET_CODE (operand1) == SUBREG
+ && GET_CODE (SUBREG_REG (operand1)) == REG
+ && REGNO (SUBREG_REG (operand1)) >= FIRST_PSEUDO_REGISTER)
+ {
+ /* We must not alter SUBREG_BYTE (operand0) since that would confuse
+ the code which tracks sets/uses for delete_output_reload. */
+ rtx temp = gen_rtx_SUBREG (GET_MODE (operand1),
+ reg_equiv_mem [REGNO (SUBREG_REG (operand1))],
+ SUBREG_BYTE (operand1));
+ operand1 = alter_subreg (&temp);
+ }
+
+ if (scratch_reg && reload_in_progress && GET_CODE (operand0) == MEM
+ && ((tem = find_replacement (&XEXP (operand0, 0)))
+ != XEXP (operand0, 0)))
+ operand0 = gen_rtx_MEM (GET_MODE (operand0), tem);
+ if (scratch_reg && reload_in_progress && GET_CODE (operand1) == MEM
+ && ((tem = find_replacement (&XEXP (operand1, 0)))
+ != XEXP (operand1, 0)))
+ operand1 = gen_rtx_MEM (GET_MODE (operand1), tem);
+
+ /* Handle secondary reloads for loads/stores of FP registers where
+ the address is symbolic by using the scratch register */
+ if (fp_reg_operand (operand0, mode)
+ && ((GET_CODE (operand1) == MEM
+ && ! memory_address_p (DFmode, XEXP (operand1, 0)))
+ || ((GET_CODE (operand1) == SUBREG
+ && GET_CODE (XEXP (operand1, 0)) == MEM
+ && !memory_address_p (DFmode, XEXP (XEXP (operand1, 0), 0)))))
+ && scratch_reg)
+ {
+ if (GET_CODE (operand1) == SUBREG)
+ operand1 = XEXP (operand1, 0);
+
+ /* SCRATCH_REG will hold an address. We want
+ it in SImode regardless of what mode it was originally given
+ to us. */
+ scratch_reg = force_mode (SImode, scratch_reg);
+
+ /* D might not fit in 14 bits either; for such cases load D into
+ scratch reg. */
+ if (!memory_address_p (Pmode, XEXP (operand1, 0)))
+ {
+ emit_move_insn (scratch_reg, XEXP (XEXP (operand1, 0), 1));
+ emit_move_insn (scratch_reg, gen_rtx_fmt_ee (GET_CODE (XEXP (operand1, 0)),
+ Pmode,
+ XEXP (XEXP (operand1, 0), 0),
+ scratch_reg));
+ }
+ else
+ emit_move_insn (scratch_reg, XEXP (operand1, 0));
+ emit_insn (gen_rtx_SET (VOIDmode, operand0,
+ gen_rtx_MEM (mode, scratch_reg)));
+ return 1;
+ }
+ else if (fp_reg_operand (operand1, mode)
+ && ((GET_CODE (operand0) == MEM
+ && ! memory_address_p (DFmode, XEXP (operand0, 0)))
+ || ((GET_CODE (operand0) == SUBREG)
+ && GET_CODE (XEXP (operand0, 0)) == MEM
+ && !memory_address_p (DFmode, XEXP (XEXP (operand0, 0), 0))))
+ && scratch_reg)
+ {
+ if (GET_CODE (operand0) == SUBREG)
+ operand0 = XEXP (operand0, 0);
+
+ /* SCRATCH_REG will hold an address and maybe the actual data. We want
+ it in SIMODE regardless of what mode it was originally given
+ to us. */
+ scratch_reg = force_mode (SImode, scratch_reg);
+
+ /* D might not fit in 14 bits either; for such cases load D into
+ scratch reg. */
+ if (!memory_address_p (Pmode, XEXP (operand0, 0)))
+ {
+ emit_move_insn (scratch_reg, XEXP (XEXP (operand0, 0), 1));
+ emit_move_insn (scratch_reg, gen_rtx_fmt_ee (GET_CODE (XEXP (operand0,
+ 0)),
+ Pmode,
+ XEXP (XEXP (operand0, 0),
+ 0),
+ scratch_reg));
+ }
+ else
+ emit_move_insn (scratch_reg, XEXP (operand0, 0));
+ emit_insn (gen_rtx_SET (VOIDmode, gen_rtx_MEM (mode, scratch_reg),
+ operand1));
+ return 1;
+ }
+ /* Handle secondary reloads for loads of FP registers from constant
+ expressions by forcing the constant into memory.
+
+ use scratch_reg to hold the address of the memory location.
+
+ The proper fix is to change PREFERRED_RELOAD_CLASS to return
+ NO_REGS when presented with a const_int and an register class
+ containing only FP registers. Doing so unfortunately creates
+ more problems than it solves. Fix this for 2.5. */
+ else if (fp_reg_operand (operand0, mode)
+ && CONSTANT_P (operand1)
+ && scratch_reg)
+ {
+ rtx xoperands[2];
+
+ /* SCRATCH_REG will hold an address and maybe the actual data. We want
+ it in SIMODE regardless of what mode it was originally given
+ to us. */
+ scratch_reg = force_mode (SImode, scratch_reg);
+
+ /* Force the constant into memory and put the address of the
+ memory location into scratch_reg. */
+ xoperands[0] = scratch_reg;
+ xoperands[1] = XEXP (force_const_mem (mode, operand1), 0);
+ emit_insn (gen_rtx_SET (mode, scratch_reg, xoperands[1]));
+
+ /* Now load the destination register. */
+ emit_insn (gen_rtx_SET (mode, operand0,
+ gen_rtx_MEM (mode, scratch_reg)));
+ return 1;
+ }
+
+ /* Now have insn-emit do whatever it normally does. */
+ return 0;
+}
+
+/* Split one or more DImode RTL references into pairs of SImode
+ references. The RTL can be REG, offsettable MEM, integer constant, or
+ CONST_DOUBLE. "operands" is a pointer to an array of DImode RTL to
+ split and "num" is its length. lo_half and hi_half are output arrays
+ that parallel "operands". */
+
+void
+split_di (rtx operands[], int num, rtx lo_half[], rtx hi_half[])
+{
+ while (num--)
+ {
+ rtx op = operands[num];
+
+ /* simplify_subreg refuses to split volatile memory addresses,
+ but we still have to handle it. */
+ if (GET_CODE (op) == MEM)
+ {
+ lo_half[num] = adjust_address (op, SImode, 4);
+ hi_half[num] = adjust_address (op, SImode, 0);
+ }
+ else
+ {
+ lo_half[num] = simplify_gen_subreg (SImode, op,
+ GET_MODE (op) == VOIDmode
+ ? DImode : GET_MODE (op), 4);
+ hi_half[num] = simplify_gen_subreg (SImode, op,
+ GET_MODE (op) == VOIDmode
+ ? DImode : GET_MODE (op), 0);
+ }
+ }
+}
+
+/* Split X into a base and a constant offset, storing them in *BASE
+ and *OFFSET respectively. */
+
+static void
+m68k_split_offset (rtx x, rtx *base, HOST_WIDE_INT *offset)
+{
+ *offset = 0;
+ if (GET_CODE (x) == PLUS && GET_CODE (XEXP (x, 1)) == CONST_INT)
+ {
+ *offset += INTVAL (XEXP (x, 1));
+ x = XEXP (x, 0);
+ }
+ *base = x;
+}
+
+/* Return true if PATTERN is a PARALLEL suitable for a movem or fmovem
+ instruction. STORE_P says whether the move is a load or store.
+
+ If the instruction uses post-increment or pre-decrement addressing,
+ AUTOMOD_BASE is the base register and AUTOMOD_OFFSET is the total
+ adjustment. This adjustment will be made by the first element of
+ PARALLEL, with the loads or stores starting at element 1. If the
+ instruction does not use post-increment or pre-decrement addressing,
+ AUTOMOD_BASE is null, AUTOMOD_OFFSET is 0, and the loads or stores
+ start at element 0. */
+
+bool
+m68k_movem_pattern_p (rtx pattern, rtx automod_base,
+ HOST_WIDE_INT automod_offset, bool store_p)
+{
+ rtx base, mem_base, set, mem, reg, last_reg;
+ HOST_WIDE_INT offset, mem_offset;
+ int i, first, len;
+ enum reg_class rclass;
+
+ len = XVECLEN (pattern, 0);
+ first = (automod_base != NULL);
+
+ if (automod_base)
+ {
+ /* Stores must be pre-decrement and loads must be post-increment. */
+ if (store_p != (automod_offset < 0))
+ return false;
+
+ /* Work out the base and offset for lowest memory location. */
+ base = automod_base;
+ offset = (automod_offset < 0 ? automod_offset : 0);
+ }
+ else
+ {
+ /* Allow any valid base and offset in the first access. */
+ base = NULL;
+ offset = 0;
+ }
+
+ last_reg = NULL;
+ rclass = NO_REGS;
+ for (i = first; i < len; i++)
+ {
+ /* We need a plain SET. */
+ set = XVECEXP (pattern, 0, i);
+ if (GET_CODE (set) != SET)
+ return false;
+
+ /* Check that we have a memory location... */
+ mem = XEXP (set, !store_p);
+ if (!MEM_P (mem) || !memory_operand (mem, VOIDmode))
+ return false;
+
+ /* ...with the right address. */
+ if (base == NULL)
+ {
+ m68k_split_offset (XEXP (mem, 0), &base, &offset);
+ /* The ColdFire instruction only allows (An) and (d16,An) modes.
+ There are no mode restrictions for 680x0 besides the
+ automodification rules enforced above. */
+ if (TARGET_COLDFIRE
+ && !m68k_legitimate_base_reg_p (base, reload_completed))
+ return false;
+ }
+ else
+ {
+ m68k_split_offset (XEXP (mem, 0), &mem_base, &mem_offset);
+ if (!rtx_equal_p (base, mem_base) || offset != mem_offset)
+ return false;
+ }
+
+ /* Check that we have a register of the required mode and class. */
+ reg = XEXP (set, store_p);
+ if (!REG_P (reg)
+ || !HARD_REGISTER_P (reg)
+ || GET_MODE (reg) != reg_raw_mode[REGNO (reg)])
+ return false;
+
+ if (last_reg)
+ {
+ /* The register must belong to RCLASS and have a higher number
+ than the register in the previous SET. */
+ if (!TEST_HARD_REG_BIT (reg_class_contents[rclass], REGNO (reg))
+ || REGNO (last_reg) >= REGNO (reg))
+ return false;
+ }
+ else
+ {
+ /* Work out which register class we need. */
+ if (INT_REGNO_P (REGNO (reg)))
+ rclass = GENERAL_REGS;
+ else if (FP_REGNO_P (REGNO (reg)))
+ rclass = FP_REGS;
+ else
+ return false;
+ }
+
+ last_reg = reg;
+ offset += GET_MODE_SIZE (GET_MODE (reg));
+ }
+
+ /* If we have an automodification, check whether the final offset is OK. */
+ if (automod_base && offset != (automod_offset < 0 ? 0 : automod_offset))
+ return false;
+
+ /* Reject unprofitable cases. */
+ if (len < first + (rclass == FP_REGS ? MIN_FMOVEM_REGS : MIN_MOVEM_REGS))
+ return false;
+
+ return true;
+}
+
+/* Return the assembly code template for a movem or fmovem instruction
+ whose pattern is given by PATTERN. Store the template's operands
+ in OPERANDS.
+
+ If the instruction uses post-increment or pre-decrement addressing,
+ AUTOMOD_OFFSET is the total adjustment, otherwise it is 0. STORE_P
+ is true if this is a store instruction. */
+
+const char *
+m68k_output_movem (rtx *operands, rtx pattern,
+ HOST_WIDE_INT automod_offset, bool store_p)
+{
+ unsigned int mask;
+ int i, first;
- /* Do that word. */
- output_asm_insn (singlemove_string (latehalf), latehalf);
+ gcc_assert (GET_CODE (pattern) == PARALLEL);
+ mask = 0;
+ first = (automod_offset != 0);
+ for (i = first; i < XVECLEN (pattern, 0); i++)
+ {
+ /* When using movem with pre-decrement addressing, register X + D0_REG
+ is controlled by bit 15 - X. For all other addressing modes,
+ register X + D0_REG is controlled by bit X. Confusingly, the
+ register mask for fmovem is in the opposite order to that for
+ movem. */
+ unsigned int regno;
+
+ gcc_assert (MEM_P (XEXP (XVECEXP (pattern, 0, i), !store_p)));
+ gcc_assert (REG_P (XEXP (XVECEXP (pattern, 0, i), store_p)));
+ regno = REGNO (XEXP (XVECEXP (pattern, 0, i), store_p));
+ if (automod_offset < 0)
+ {
+ if (FP_REGNO_P (regno))
+ mask |= 1 << (regno - FP0_REG);
+ else
+ mask |= 1 << (15 - (regno - D0_REG));
+ }
+ else
+ {
+ if (FP_REGNO_P (regno))
+ mask |= 1 << (7 - (regno - FP0_REG));
+ else
+ mask |= 1 << (regno - D0_REG);
+ }
+ }
+ CC_STATUS_INIT;
- /* Undo the adds we just did. */
- if (addreg0)
+ if (automod_offset == 0)
+ operands[0] = XEXP (XEXP (XVECEXP (pattern, 0, first), !store_p), 0);
+ else if (automod_offset < 0)
+ operands[0] = gen_rtx_PRE_DEC (Pmode, SET_DEST (XVECEXP (pattern, 0, 0)));
+ else
+ operands[0] = gen_rtx_POST_INC (Pmode, SET_DEST (XVECEXP (pattern, 0, 0)));
+ operands[1] = GEN_INT (mask);
+ if (FP_REGNO_P (REGNO (XEXP (XVECEXP (pattern, 0, first), store_p))))
{
- if (size == 12)
- output_asm_insn ("subq%.l %#8,%0", &addreg0);
+ if (store_p)
+ return MOTOROLA ? "fmovm %1,%a0" : "fmovem %1,%a0";
else
- output_asm_insn ("subq%.l %#4,%0", &addreg0);
+ return MOTOROLA ? "fmovm %a0,%1" : "fmovem %a0,%1";
}
- if (addreg1)
+ else
{
- if (size == 12)
- output_asm_insn ("subq%.l %#8,%0", &addreg1);
+ if (store_p)
+ return MOTOROLA ? "movm.l %1,%a0" : "moveml %1,%a0";
else
- output_asm_insn ("subq%.l %#4,%0", &addreg1);
+ return MOTOROLA ? "movm.l %a0,%1" : "moveml %a0,%1";
}
-
- return "";
}
/* Return a REG that occurs in ADDR with coefficient 1.
else if (CONSTANT_P (XEXP (addr, 1)))
addr = XEXP (addr, 0);
else
- abort ();
+ gcc_unreachable ();
}
- if (GET_CODE (addr) == REG)
- return addr;
- abort ();
+ gcc_assert (GET_CODE (addr) == REG);
+ return addr;
}
-/* Output assembler code to perform a 32 bit 3 operand add. */
+/* Output assembler code to perform a 32-bit 3-operand add. */
const char *
output_addsi3 (rtx *operands)
/* These insns can result from reloads to access
stack slots over 64k from the frame pointer. */
if (GET_CODE (operands[2]) == CONST_INT
- && INTVAL (operands[2]) + 0x8000 >= (unsigned) 0x10000)
+ && (INTVAL (operands[2]) < -32768 || INTVAL (operands[2]) > 32767))
return "move%.l %2,%0\n\tadd%.l %1,%0";
-#ifdef SGS
- if (GET_CODE (operands[2]) == REG)
- return "lea 0(%1,%2.l),%0";
- else
- return "lea %c2(%1),%0";
-#elif defined(MOTOROLA)
if (GET_CODE (operands[2]) == REG)
- return "lea (%1,%2.l),%0";
- else
- return "lea (%c2,%1),%0";
-#else /* not MOTOROLA (MIT syntax) */
- if (GET_CODE (operands[2]) == REG)
- return "lea %1@(0,%2:l),%0";
- else
- return "lea %1@(%c2),%0";
-#endif /* not MOTOROLA */
+ return MOTOROLA ? "lea (%1,%2.l),%0" : "lea %1@(0,%2:l),%0";
+ return MOTOROLA ? "lea (%c2,%1),%0" : "lea %1@(%c2),%0";
}
if (GET_CODE (operands[2]) == CONST_INT)
{
/* On the CPU32 it is faster to use two addql instructions to
add a small integer (8 < N <= 16) to a register.
Likewise for subql. */
- if (TARGET_CPU32 && REG_P (operands[0]))
+ if (TUNE_CPU32 && REG_P (operands[0]))
{
if (INTVAL (operands[2]) > 8
&& INTVAL (operands[2]) <= 16)
{
operands[2] = GEN_INT (INTVAL (operands[2]) - 8);
- return "addq%.l %#8,%0\n\taddq%.l %2,%0";
+ return "addq%.l #8,%0\n\taddq%.l %2,%0";
}
if (INTVAL (operands[2]) < -8
&& INTVAL (operands[2]) >= -16)
{
operands[2] = GEN_INT (- INTVAL (operands[2]) - 8);
- return "subq%.l %#8,%0\n\tsubq%.l %2,%0";
+ return "subq%.l #8,%0\n\tsubq%.l %2,%0";
}
}
if (ADDRESS_REG_P (operands[0])
&& INTVAL (operands[2]) >= -0x8000
&& INTVAL (operands[2]) < 0x8000)
{
- if (TARGET_68040)
+ if (TUNE_68040)
return "add%.w %2,%0";
else
-#ifdef MOTOROLA
- return "lea (%c2,%0),%0";
-#else
- return "lea %0@(%c2),%0";
-#endif
+ return MOTOROLA ? "lea (%c2,%0),%0" : "lea %0@(%c2),%0";
}
}
return "add%.l %2,%0";
if (GET_CODE (exp) == SET)
{
if (GET_CODE (SET_SRC (exp)) == CALL)
- {
- CC_STATUS_INIT;
- }
+ CC_STATUS_INIT;
else if (ADDRESS_REG_P (SET_DEST (exp)))
{
if (cc_status.value1 && modified_in_p (cc_status.value1, insn))
if (cc_status.value2 && modified_in_p (cc_status.value2, insn))
cc_status.value2 = 0;
}
+ /* fmoves to memory or data registers do not set the condition
+ codes. Normal moves _do_ set the condition codes, but not in
+ a way that is appropriate for comparison with 0, because -0.0
+ would be treated as a negative nonzero number. Note that it
+ isn't appropriate to conditionalize this restriction on
+ HONOR_SIGNED_ZEROS because that macro merely indicates whether
+ we care about the difference between -0.0 and +0.0. */
else if (!FP_REG_P (SET_DEST (exp))
&& SET_DEST (exp) != cc0_rtx
&& (FP_REG_P (SET_SRC (exp))
|| GET_CODE (SET_SRC (exp)) == FIX
- || GET_CODE (SET_SRC (exp)) == FLOAT_TRUNCATE
- || GET_CODE (SET_SRC (exp)) == FLOAT_EXTEND))
- {
- CC_STATUS_INIT;
- }
+ || FLOAT_MODE_P (GET_MODE (SET_DEST (exp)))))
+ CC_STATUS_INIT;
/* A pair of move insns doesn't produce a useful overall cc. */
else if (!FP_REG_P (SET_DEST (exp))
&& !FP_REG_P (SET_SRC (exp))
&& (GET_CODE (SET_SRC (exp)) == REG
|| GET_CODE (SET_SRC (exp)) == MEM
|| GET_CODE (SET_SRC (exp)) == CONST_DOUBLE))
- {
- CC_STATUS_INIT;
- }
- else if (GET_CODE (SET_SRC (exp)) == CALL)
- {
- CC_STATUS_INIT;
- }
- else if (XEXP (exp, 0) != pc_rtx)
+ CC_STATUS_INIT;
+ else if (SET_DEST (exp) != pc_rtx)
{
cc_status.flags = 0;
- cc_status.value1 = XEXP (exp, 0);
- cc_status.value2 = XEXP (exp, 1);
+ cc_status.value1 = SET_DEST (exp);
+ cc_status.value2 = SET_SRC (exp);
}
}
else if (GET_CODE (exp) == PARALLEL
&& GET_CODE (XVECEXP (exp, 0, 0)) == SET)
{
- if (ADDRESS_REG_P (XEXP (XVECEXP (exp, 0, 0), 0)))
+ rtx dest = SET_DEST (XVECEXP (exp, 0, 0));
+ rtx src = SET_SRC (XVECEXP (exp, 0, 0));
+
+ if (ADDRESS_REG_P (dest))
CC_STATUS_INIT;
- else if (XEXP (XVECEXP (exp, 0, 0), 0) != pc_rtx)
+ else if (dest != pc_rtx)
{
cc_status.flags = 0;
- cc_status.value1 = XEXP (XVECEXP (exp, 0, 0), 0);
- cc_status.value2 = XEXP (XVECEXP (exp, 0, 0), 1);
+ cc_status.value1 = dest;
+ cc_status.value2 = src;
}
}
else
if (cc_status.value2 != 0)
switch (GET_CODE (cc_status.value2))
{
- case PLUS: case MINUS: case MULT:
- case DIV: case UDIV: case MOD: case UMOD: case NEG:
-#if 0 /* These instructions always clear the overflow bit */
case ASHIFT: case ASHIFTRT: case LSHIFTRT:
case ROTATE: case ROTATERT:
-#endif
+ /* These instructions always clear the overflow bit, and set
+ the carry to the bit shifted out. */
+ /* ??? We don't currently have a way to signal carry not valid,
+ nor do we check for it in the branch insns. */
+ CC_STATUS_INIT;
+ break;
+
+ case PLUS: case MINUS: case MULT:
+ case DIV: case UDIV: case MOD: case UMOD: case NEG:
if (GET_MODE (cc_status.value2) != VOIDmode)
cc_status.flags |= CC_NO_OVERFLOW;
break;
{
static char buf[40];
- sprintf (buf, "fmovecr %%#0x%x,%%0", code & 0xff);
+ sprintf (buf, "fmovecr #0x%x,%%0", code & 0xff);
return buf;
}
return "fmove%.d %1,%0";
{
static char buf[40];
- sprintf (buf, "fmovecr %%#0x%x,%%0", code & 0xff);
+ sprintf (buf, "fmovecr #0x%x,%%0", code & 0xff);
return buf;
}
return "fmove%.s %f1,%0";
"10000.0",
"1e8",
"1e16"
- };
+};
static const int codes_68881[7] = {
0x0f,
0x35,
0x36,
0x37
- };
+};
REAL_VALUE_TYPE values_68881[7];
/* fmovecr must be emulated on the 68040 and 68060, so it shouldn't be
used at all on those chips. */
- if (TARGET_68040 || TARGET_68060)
+ if (TUNE_68040_60)
return 0;
if (! inited_68881_table)
'$' for the letter `s' in an op code, but only on the 68040.
'&' for the letter `d' in an op code, but only on the 68040.
'/' for register prefix needed by longlong.h.
+ '?' for m68k_library_id_string
'b' for byte insn (no effect, on the Sun; this is for the ISI).
'd' to force memory addressing to be absolute, not relative.
'f' for float insn (print a CONST_DOUBLE as a float rather than in hex)
- 'o' for operands to go directly to output_operand_address (bypassing
- print_operand_address--used only for SYMBOL_REFs under TARGET_PCREL)
'x' for float insn (print a CONST_DOUBLE as a float rather than in hex),
or print pair of registers as rx:ry.
-
- */
+ 'p' print an address with @PLTPC attached, but only if the operand
+ is not locally-bound. */
void
print_operand (FILE *file, rtx op, int letter)
{
if (letter == '.')
{
-#if defined (MOTOROLA)
- fprintf (file, ".");
-#endif
+ if (MOTOROLA)
+ fprintf (file, ".");
}
else if (letter == '#')
- {
- asm_fprintf (file, "%I");
- }
+ asm_fprintf (file, "%I");
else if (letter == '-')
- {
-#ifdef MOTOROLA
- asm_fprintf (file, "-(%Rsp)");
-#else
- asm_fprintf (file, "%Rsp@-");
-#endif
- }
+ asm_fprintf (file, MOTOROLA ? "-(%Rsp)" : "%Rsp@-");
else if (letter == '+')
- {
-#ifdef MOTOROLA
- asm_fprintf (file, "(%Rsp)+");
-#else
- asm_fprintf (file, "%Rsp@+");
-#endif
- }
+ asm_fprintf (file, MOTOROLA ? "(%Rsp)+" : "%Rsp@+");
else if (letter == '@')
- {
-#ifdef MOTOROLA
- asm_fprintf (file, "(%Rsp)");
-#else
- asm_fprintf (file, "%Rsp@");
-#endif
- }
+ asm_fprintf (file, MOTOROLA ? "(%Rsp)" : "%Rsp@");
else if (letter == '!')
- {
- asm_fprintf (file, "%Rfpcr");
- }
+ asm_fprintf (file, "%Rfpcr");
else if (letter == '$')
{
- if (TARGET_68040_ONLY)
- {
- fprintf (file, "s");
- }
+ if (TARGET_68040)
+ fprintf (file, "s");
}
else if (letter == '&')
{
- if (TARGET_68040_ONLY)
- {
- fprintf (file, "d");
- }
+ if (TARGET_68040)
+ fprintf (file, "d");
}
else if (letter == '/')
+ asm_fprintf (file, "%R");
+ else if (letter == '?')
+ asm_fprintf (file, m68k_library_id_string);
+ else if (letter == 'p')
{
- asm_fprintf (file, "%R");
- }
- else if (letter == 'o')
- {
- /* This is only for direct addresses with TARGET_PCREL */
- if (GET_CODE (op) != MEM || GET_CODE (XEXP (op, 0)) != SYMBOL_REF
- || !TARGET_PCREL)
- abort ();
- output_addr_const (file, XEXP (op, 0));
+ output_addr_const (file, op);
+ if (!(GET_CODE (op) == SYMBOL_REF && SYMBOL_REF_LOCAL_P (op)))
+ fprintf (file, "@PLTPC");
}
else if (GET_CODE (op) == REG)
{
if (letter == 'R')
/* Print out the second register name of a register pair.
I.e., R (6) => 7. */
- fputs (reg_names[REGNO (op) + 1], file);
+ fputs (M68K_REGNAME(REGNO (op) + 1), file);
else
- fputs (reg_names[REGNO (op)], file);
+ fputs (M68K_REGNAME(REGNO (op)), file);
}
else if (GET_CODE (op) == MEM)
{
&& !(GET_CODE (XEXP (op, 0)) == CONST_INT
&& INTVAL (XEXP (op, 0)) < 0x8000
&& INTVAL (XEXP (op, 0)) >= -0x8000))
- {
-#ifdef MOTOROLA
- fprintf (file, ".l");
-#else
- fprintf (file, ":l");
-#endif
- }
+ fprintf (file, MOTOROLA ? ".l" : ":l");
}
else if (GET_CODE (op) == CONST_DOUBLE && GET_MODE (op) == SFmode)
{
REAL_VALUE_TYPE r;
- REAL_VALUE_FROM_CONST_DOUBLE (r, op);
- ASM_OUTPUT_FLOAT_OPERAND (letter, file, r);
- }
- else if (GET_CODE (op) == CONST_DOUBLE && GET_MODE (op) == XFmode)
- {
- REAL_VALUE_TYPE r;
- REAL_VALUE_FROM_CONST_DOUBLE (r, op);
- ASM_OUTPUT_LONG_DOUBLE_OPERAND (file, r);
- }
- else if (GET_CODE (op) == CONST_DOUBLE && GET_MODE (op) == DFmode)
- {
- REAL_VALUE_TYPE r;
- REAL_VALUE_FROM_CONST_DOUBLE (r, op);
- ASM_OUTPUT_DOUBLE_OPERAND (file, r);
- }
- else
- {
- /* Use `print_operand_address' instead of `output_addr_const'
- to ensure that we print relevant PIC stuff. */
- asm_fprintf (file, "%I");
- if (TARGET_PCREL
- && (GET_CODE (op) == SYMBOL_REF || GET_CODE (op) == CONST))
- print_operand_address (file, op);
- else
- output_addr_const (file, op);
- }
-}
-
-\f
-/* A C compound statement to output to stdio stream STREAM the
- assembler syntax for an instruction operand that is a memory
- reference whose address is ADDR. ADDR is an RTL expression.
-
- Note that this contains a kludge that knows that the only reason
- we have an address (plus (label_ref...) (reg...)) when not generating
- PIC code is in the insn before a tablejump, and we know that m68k.md
- generates a label LInnn: on such an insn.
-
- It is possible for PIC to generate a (plus (label_ref...) (reg...))
- and we handle that just like we would a (plus (symbol_ref...) (reg...)).
-
- Some SGS assemblers have a bug such that "Lnnn-LInnn-2.b(pc,d0.l*2)"
- fails to assemble. Luckily "Lnnn(pc,d0.l*2)" produces the results
- we want. This difference can be accommodated by using an assembler
- define such "LDnnn" to be either "Lnnn-LInnn-2.b", "Lnnn", or any other
- string, as necessary. This is accomplished via the ASM_OUTPUT_CASE_END
- macro. See m68k/sgs.h for an example; for versions without the bug.
- Some assemblers refuse all the above solutions. The workaround is to
- emit "K(pc,d0.l*2)" with K being a small constant known to give the
- right behavior.
-
- They also do not like things like "pea 1.w", so we simple leave off
- the .w on small constants.
-
- This routine is responsible for distinguishing between -fpic and -fPIC
- style relocations in an address. When generating -fpic code the
- offset is output in word mode (eg movel a5@(_foo:w), a0). When generating
- -fPIC code the offset is output in long mode (eg movel a5@(_foo:l), a0) */
-
-#ifndef ASM_OUTPUT_CASE_FETCH
-#ifdef MOTOROLA
-#ifdef SGS
-#define ASM_OUTPUT_CASE_FETCH(file, labelno, regname)\
- asm_fprintf (file, "%LLD%d(%Rpc,%s.", labelno, regname)
-#else
-#define ASM_OUTPUT_CASE_FETCH(file, labelno, regname)\
- asm_fprintf (file, "%LL%d-%LLI%d.b(%Rpc,%s.", labelno, labelno, regname)
-#endif
-#else
-#define ASM_OUTPUT_CASE_FETCH(file, labelno, regname)\
- asm_fprintf (file, "%Rpc@(%LL%d-%LLI%d-2:b,%s:", labelno, labelno, regname)
-#endif
-#endif /* ASM_OUTPUT_CASE_FETCH */
-
-void
-print_operand_address (FILE *file, rtx addr)
-{
- register rtx reg1, reg2, breg, ireg;
- rtx offset;
-
- switch (GET_CODE (addr))
- {
- case REG:
-#ifdef MOTOROLA
- fprintf (file, "(%s)", reg_names[REGNO (addr)]);
-#else
- fprintf (file, "%s@", reg_names[REGNO (addr)]);
-#endif
- break;
- case PRE_DEC:
-#ifdef MOTOROLA
- fprintf (file, "-(%s)", reg_names[REGNO (XEXP (addr, 0))]);
-#else
- fprintf (file, "%s@-", reg_names[REGNO (XEXP (addr, 0))]);
-#endif
- break;
- case POST_INC:
-#ifdef MOTOROLA
- fprintf (file, "(%s)+", reg_names[REGNO (XEXP (addr, 0))]);
-#else
- fprintf (file, "%s@+", reg_names[REGNO (XEXP (addr, 0))]);
-#endif
- break;
- case PLUS:
- reg1 = reg2 = ireg = breg = offset = 0;
- if (CONSTANT_ADDRESS_P (XEXP (addr, 0)))
- {
- offset = XEXP (addr, 0);
- addr = XEXP (addr, 1);
- }
- else if (CONSTANT_ADDRESS_P (XEXP (addr, 1)))
- {
- offset = XEXP (addr, 1);
- addr = XEXP (addr, 0);
- }
- if (GET_CODE (addr) != PLUS)
- {
- ;
- }
- else if (GET_CODE (XEXP (addr, 0)) == SIGN_EXTEND)
- {
- reg1 = XEXP (addr, 0);
- addr = XEXP (addr, 1);
- }
- else if (GET_CODE (XEXP (addr, 1)) == SIGN_EXTEND)
- {
- reg1 = XEXP (addr, 1);
- addr = XEXP (addr, 0);
- }
- else if (GET_CODE (XEXP (addr, 0)) == MULT)
- {
- reg1 = XEXP (addr, 0);
- addr = XEXP (addr, 1);
- }
- else if (GET_CODE (XEXP (addr, 1)) == MULT)
- {
- reg1 = XEXP (addr, 1);
- addr = XEXP (addr, 0);
- }
- else if (GET_CODE (XEXP (addr, 0)) == REG)
- {
- reg1 = XEXP (addr, 0);
- addr = XEXP (addr, 1);
- }
- else if (GET_CODE (XEXP (addr, 1)) == REG)
- {
- reg1 = XEXP (addr, 1);
- addr = XEXP (addr, 0);
- }
- if (GET_CODE (addr) == REG || GET_CODE (addr) == MULT
- || GET_CODE (addr) == SIGN_EXTEND)
- {
- if (reg1 == 0)
- {
- reg1 = addr;
- }
- else
- {
- reg2 = addr;
- }
- addr = 0;
- }
-#if 0 /* for OLD_INDEXING */
- else if (GET_CODE (addr) == PLUS)
- {
- if (GET_CODE (XEXP (addr, 0)) == REG)
- {
- reg2 = XEXP (addr, 0);
- addr = XEXP (addr, 1);
- }
- else if (GET_CODE (XEXP (addr, 1)) == REG)
- {
- reg2 = XEXP (addr, 1);
- addr = XEXP (addr, 0);
- }
- }
-#endif
- if (offset != 0)
- {
- if (addr != 0)
- {
- abort ();
- }
- addr = offset;
- }
- if ((reg1 && (GET_CODE (reg1) == SIGN_EXTEND
- || GET_CODE (reg1) == MULT))
- || (reg2 != 0 && REGNO_OK_FOR_BASE_P (REGNO (reg2))))
- {
- breg = reg2;
- ireg = reg1;
- }
- else if (reg1 != 0 && REGNO_OK_FOR_BASE_P (REGNO (reg1)))
- {
- breg = reg1;
- ireg = reg2;
- }
- if (ireg != 0 && breg == 0 && GET_CODE (addr) == LABEL_REF
- && ! (flag_pic && ireg == pic_offset_table_rtx))
- {
- int scale = 1;
- if (GET_CODE (ireg) == MULT)
- {
- scale = INTVAL (XEXP (ireg, 1));
- ireg = XEXP (ireg, 0);
- }
- if (GET_CODE (ireg) == SIGN_EXTEND)
- {
- ASM_OUTPUT_CASE_FETCH (file,
- CODE_LABEL_NUMBER (XEXP (addr, 0)),
- reg_names[REGNO (XEXP (ireg, 0))]);
- fprintf (file, "w");
- }
- else
- {
- ASM_OUTPUT_CASE_FETCH (file,
- CODE_LABEL_NUMBER (XEXP (addr, 0)),
- reg_names[REGNO (ireg)]);
- fprintf (file, "l");
- }
- if (scale != 1)
- {
-#ifdef MOTOROLA
- fprintf (file, "*%d", scale);
-#else
- fprintf (file, ":%d", scale);
-#endif
- }
- putc (')', file);
- break;
- }
- if (breg != 0 && ireg == 0 && GET_CODE (addr) == LABEL_REF
- && ! (flag_pic && breg == pic_offset_table_rtx))
- {
- ASM_OUTPUT_CASE_FETCH (file,
- CODE_LABEL_NUMBER (XEXP (addr, 0)),
- reg_names[REGNO (breg)]);
- fprintf (file, "l)");
- break;
- }
- if (ireg != 0 || breg != 0)
- {
- int scale = 1;
- if (breg == 0)
- {
- abort ();
- }
- if (! flag_pic && addr && GET_CODE (addr) == LABEL_REF)
- {
- abort ();
- }
-#ifdef MOTOROLA
- if (addr != 0)
- {
- output_addr_const (file, addr);
- if (flag_pic && (breg == pic_offset_table_rtx))
- {
- fprintf (file, "@GOT");
- if (flag_pic == 1)
- fprintf (file, ".w");
- }
- }
- fprintf (file, "(%s", reg_names[REGNO (breg)]);
- if (ireg != 0)
- {
- putc (',', file);
- }
-#else
- fprintf (file, "%s@(", reg_names[REGNO (breg)]);
- if (addr != 0)
- {
- output_addr_const (file, addr);
- if ((flag_pic == 1) && (breg == pic_offset_table_rtx))
- fprintf (file, ":w");
- if ((flag_pic == 2) && (breg == pic_offset_table_rtx))
- fprintf (file, ":l");
- }
- if (addr != 0 && ireg != 0)
- {
- putc (',', file);
- }
-#endif
- if (ireg != 0 && GET_CODE (ireg) == MULT)
- {
- scale = INTVAL (XEXP (ireg, 1));
- ireg = XEXP (ireg, 0);
- }
- if (ireg != 0 && GET_CODE (ireg) == SIGN_EXTEND)
- {
-#ifdef MOTOROLA
- fprintf (file, "%s.w", reg_names[REGNO (XEXP (ireg, 0))]);
-#else
- fprintf (file, "%s:w", reg_names[REGNO (XEXP (ireg, 0))]);
-#endif
- }
- else if (ireg != 0)
- {
-#ifdef MOTOROLA
- fprintf (file, "%s.l", reg_names[REGNO (ireg)]);
-#else
- fprintf (file, "%s:l", reg_names[REGNO (ireg)]);
-#endif
- }
- if (scale != 1)
- {
-#ifdef MOTOROLA
- fprintf (file, "*%d", scale);
-#else
- fprintf (file, ":%d", scale);
-#endif
- }
- putc (')', file);
- break;
- }
- else if (reg1 != 0 && GET_CODE (addr) == LABEL_REF
- && ! (flag_pic && reg1 == pic_offset_table_rtx))
- {
- ASM_OUTPUT_CASE_FETCH (file,
- CODE_LABEL_NUMBER (XEXP (addr, 0)),
- reg_names[REGNO (reg1)]);
- fprintf (file, "l)");
- break;
- }
- /* FALL-THROUGH (is this really what we want?) */
- default:
- if (GET_CODE (addr) == CONST_INT
- && INTVAL (addr) < 0x8000
- && INTVAL (addr) >= -0x8000)
- {
-#ifdef MOTOROLA
-#ifdef SGS
- /* Many SGS assemblers croak on size specifiers for constants. */
- fprintf (file, "%d", (int) INTVAL (addr));
-#else
- fprintf (file, "%d.w", (int) INTVAL (addr));
-#endif
-#else
- fprintf (file, "%d:w", (int) INTVAL (addr));
-#endif
- }
- else if (GET_CODE (addr) == CONST_INT)
- {
+ REAL_VALUE_FROM_CONST_DOUBLE (r, op);
+ ASM_OUTPUT_FLOAT_OPERAND (letter, file, r);
+ }
+ else if (GET_CODE (op) == CONST_DOUBLE && GET_MODE (op) == XFmode)
+ {
+ REAL_VALUE_TYPE r;
+ REAL_VALUE_FROM_CONST_DOUBLE (r, op);
+ ASM_OUTPUT_LONG_DOUBLE_OPERAND (file, r);
+ }
+ else if (GET_CODE (op) == CONST_DOUBLE && GET_MODE (op) == DFmode)
+ {
+ REAL_VALUE_TYPE r;
+ REAL_VALUE_FROM_CONST_DOUBLE (r, op);
+ ASM_OUTPUT_DOUBLE_OPERAND (file, r);
+ }
+ else
+ {
+ /* Use `print_operand_address' instead of `output_addr_const'
+ to ensure that we print relevant PIC stuff. */
+ asm_fprintf (file, "%I");
+ if (TARGET_PCREL
+ && (GET_CODE (op) == SYMBOL_REF || GET_CODE (op) == CONST))
+ print_operand_address (file, op);
+ else
+ output_addr_const (file, op);
+ }
+}
+
+\f
+/* A C compound statement to output to stdio stream STREAM the
+ assembler syntax for an instruction operand that is a memory
+ reference whose address is ADDR. ADDR is an RTL expression.
+
+ Note that this contains a kludge that knows that the only reason
+ we have an address (plus (label_ref...) (reg...)) when not generating
+ PIC code is in the insn before a tablejump, and we know that m68k.md
+ generates a label LInnn: on such an insn.
+
+ It is possible for PIC to generate a (plus (label_ref...) (reg...))
+ and we handle that just like we would a (plus (symbol_ref...) (reg...)).
+
+ Some SGS assemblers have a bug such that "Lnnn-LInnn-2.b(pc,d0.l*2)"
+ fails to assemble. Luckily "Lnnn(pc,d0.l*2)" produces the results
+ we want. This difference can be accommodated by using an assembler
+ define such "LDnnn" to be either "Lnnn-LInnn-2.b", "Lnnn", or any other
+ string, as necessary. This is accomplished via the ASM_OUTPUT_CASE_END
+ macro. See m68k/sgs.h for an example; for versions without the bug.
+ Some assemblers refuse all the above solutions. The workaround is to
+ emit "K(pc,d0.l*2)" with K being a small constant known to give the
+ right behavior.
+
+ They also do not like things like "pea 1.w", so we simple leave off
+ the .w on small constants.
+
+ This routine is responsible for distinguishing between -fpic and -fPIC
+ style relocations in an address. When generating -fpic code the
+ offset is output in word mode (e.g. movel a5@(_foo:w), a0). When generating
+ -fPIC code the offset is output in long mode (e.g. movel a5@(_foo:l), a0) */
+
+void
+print_operand_address (FILE *file, rtx addr)
+{
+ struct m68k_address address;
+
+ if (!m68k_decompose_address (QImode, addr, true, &address))
+ gcc_unreachable ();
+
+ if (address.code == PRE_DEC)
+ fprintf (file, MOTOROLA ? "-(%s)" : "%s@-",
+ M68K_REGNAME (REGNO (address.base)));
+ else if (address.code == POST_INC)
+ fprintf (file, MOTOROLA ? "(%s)+" : "%s@+",
+ M68K_REGNAME (REGNO (address.base)));
+ else if (!address.base && !address.index)
+ {
+ /* A constant address. */
+ gcc_assert (address.offset == addr);
+ if (GET_CODE (addr) == CONST_INT)
+ {
+ /* (xxx).w or (xxx).l. */
+ if (IN_RANGE (INTVAL (addr), -0x8000, 0x7fff))
+ fprintf (file, MOTOROLA ? "%d.w" : "%d:w", (int) INTVAL (addr));
+ else
fprintf (file, HOST_WIDE_INT_PRINT_DEC, INTVAL (addr));
- }
- else if (TARGET_PCREL)
- {
- fputc ('(', file);
- output_addr_const (file, addr);
- if (flag_pic == 1)
- asm_fprintf (file, ":w,%Rpc)");
- else
- asm_fprintf (file, ":l,%Rpc)");
- }
- else
- {
- /* Special case for SYMBOL_REF if the symbol name ends in
- `.<letter>', this can be mistaken as a size suffix. Put
- the name in parentheses. */
- if (GET_CODE (addr) == SYMBOL_REF
- && strlen (XSTR (addr, 0)) > 2
- && XSTR (addr, 0)[strlen (XSTR (addr, 0)) - 2] == '.')
- {
- putc ('(', file);
- output_addr_const (file, addr);
- putc (')', file);
- }
- else
+ }
+ else if (TARGET_PCREL)
+ {
+ /* (d16,PC) or (bd,PC,Xn) (with suppressed index register). */
+ fputc ('(', file);
+ output_addr_const (file, addr);
+ asm_fprintf (file, flag_pic == 1 ? ":w,%Rpc)" : ":l,%Rpc)");
+ }
+ else
+ {
+ /* (xxx).l. We need a special case for SYMBOL_REF if the symbol
+ name ends in `.<letter>', as the last 2 characters can be
+ mistaken as a size suffix. Put the name in parentheses. */
+ if (GET_CODE (addr) == SYMBOL_REF
+ && strlen (XSTR (addr, 0)) > 2
+ && XSTR (addr, 0)[strlen (XSTR (addr, 0)) - 2] == '.')
+ {
+ putc ('(', file);
output_addr_const (file, addr);
- }
- break;
+ putc (')', file);
+ }
+ else
+ output_addr_const (file, addr);
+ }
+ }
+ else
+ {
+ int labelno;
+
+ /* If ADDR is a (d8,pc,Xn) address, this is the number of the
+ label being accessed, otherwise it is -1. */
+ labelno = (address.offset
+ && !address.base
+ && GET_CODE (address.offset) == LABEL_REF
+ ? CODE_LABEL_NUMBER (XEXP (address.offset, 0))
+ : -1);
+ if (MOTOROLA)
+ {
+ /* Print the "offset(base" component. */
+ if (labelno >= 0)
+ asm_fprintf (file, "%LL%d-%LLI%d.b(%Rpc,", labelno, labelno);
+ else
+ {
+ if (address.offset)
+ {
+ output_addr_const (file, address.offset);
+ if (flag_pic && address.base == pic_offset_table_rtx)
+ {
+ fprintf (file, "@GOT");
+ if (flag_pic == 1 && TARGET_68020)
+ fprintf (file, ".w");
+ }
+ }
+ putc ('(', file);
+ if (address.base)
+ fputs (M68K_REGNAME (REGNO (address.base)), file);
+ }
+ /* Print the ",index" component, if any. */
+ if (address.index)
+ {
+ if (address.base)
+ putc (',', file);
+ fprintf (file, "%s.%c",
+ M68K_REGNAME (REGNO (address.index)),
+ GET_MODE (address.index) == HImode ? 'w' : 'l');
+ if (address.scale != 1)
+ fprintf (file, "*%d", address.scale);
+ }
+ putc (')', file);
+ }
+ else /* !MOTOROLA */
+ {
+ if (!address.offset && !address.index)
+ fprintf (file, "%s@", M68K_REGNAME (REGNO (address.base)));
+ else
+ {
+ /* Print the "base@(offset" component. */
+ if (labelno >= 0)
+ asm_fprintf (file, "%Rpc@(%LL%d-%LLI%d-2:b", labelno, labelno);
+ else
+ {
+ if (address.base)
+ fputs (M68K_REGNAME (REGNO (address.base)), file);
+ fprintf (file, "@(");
+ if (address.offset)
+ {
+ output_addr_const (file, address.offset);
+ if (address.base == pic_offset_table_rtx && TARGET_68020)
+ switch (flag_pic)
+ {
+ case 1:
+ fprintf (file, ":w"); break;
+ case 2:
+ fprintf (file, ":l"); break;
+ default:
+ break;
+ }
+ }
+ }
+ /* Print the ",index" component, if any. */
+ if (address.index)
+ {
+ fprintf (file, ",%s:%c",
+ M68K_REGNAME (REGNO (address.index)),
+ GET_MODE (address.index) == HImode ? 'w' : 'l');
+ if (address.scale != 1)
+ fprintf (file, ":%d", address.scale);
+ }
+ putc (')', file);
+ }
+ }
}
}
\f
}
p = prev_nonnote_insn (p);
-
}
return false;
}
-/* Accept integer operands in the range 0..0xffffffff. We have to check the
- range carefully since this predicate is used in DImode contexts. Also, we
- need some extra crud to make it work when hosted on 64-bit machines. */
-
-int
-const_uint32_operand (rtx op, enum machine_mode mode)
-{
- /* It doesn't make sense to ask this question with a mode that is
- not larger than 32 bits. */
- if (GET_MODE_BITSIZE (mode) <= 32)
- abort ();
-
-#if HOST_BITS_PER_WIDE_INT > 32
- /* All allowed constants will fit a CONST_INT. */
- return (GET_CODE (op) == CONST_INT
- && (INTVAL (op) >= 0 && INTVAL (op) <= 0xffffffffL));
-#else
- return (GET_CODE (op) == CONST_INT
- || (GET_CODE (op) == CONST_DOUBLE && CONST_DOUBLE_HIGH (op) == 0));
-#endif
-}
-
-/* Accept integer operands in the range -0x80000000..0x7fffffff. We have
- to check the range carefully since this predicate is used in DImode
- contexts. */
-
-int
-const_sint32_operand (rtx op, enum machine_mode mode)
-{
- /* It doesn't make sense to ask this question with a mode that is
- not larger than 32 bits. */
- if (GET_MODE_BITSIZE (mode) <= 32)
- abort ();
-
- /* All allowed constants will fit a CONST_INT. */
- return (GET_CODE (op) == CONST_INT
- && (INTVAL (op) >= (-0x7fffffff - 1) && INTVAL (op) <= 0x7fffffff));
-}
-
/* Operand predicates for implementing asymmetric pc-relative addressing
on m68k. The m68k supports pc-relative addressing (mode 7, register 2)
when used as a source operand, but not as a destination operand.
***************************************************************************/
-/* Special case of a general operand that's used as a source operand.
- Use this to permit reads from PC-relative memory when -mpcrel
- is specified. */
-
-int
-general_src_operand (rtx op, enum machine_mode mode)
-{
- if (TARGET_PCREL
- && GET_CODE (op) == MEM
- && (GET_CODE (XEXP (op, 0)) == SYMBOL_REF
- || GET_CODE (XEXP (op, 0)) == LABEL_REF
- || GET_CODE (XEXP (op, 0)) == CONST))
- return 1;
- return general_operand (op, mode);
-}
-
-/* Special case of a nonimmediate operand that's used as a source.
- Use this to permit reads from PC-relative memory when -mpcrel
- is specified. */
-
-int
-nonimmediate_src_operand (rtx op, enum machine_mode mode)
-{
- if (TARGET_PCREL && GET_CODE (op) == MEM
- && (GET_CODE (XEXP (op, 0)) == SYMBOL_REF
- || GET_CODE (XEXP (op, 0)) == LABEL_REF
- || GET_CODE (XEXP (op, 0)) == CONST))
- return 1;
- return nonimmediate_operand (op, mode);
-}
-
-/* Special case of a memory operand that's used as a source.
- Use this to permit reads from PC-relative memory when -mpcrel
- is specified. */
-
-int
-memory_src_operand (rtx op, enum machine_mode mode)
-{
- if (TARGET_PCREL && GET_CODE (op) == MEM
- && (GET_CODE (XEXP (op, 0)) == SYMBOL_REF
- || GET_CODE (XEXP (op, 0)) == LABEL_REF
- || GET_CODE (XEXP (op, 0)) == CONST))
- return 1;
- return memory_operand (op, mode);
-}
-
-/* Predicate that accepts only a pc-relative address. This is needed
- because pc-relative addresses don't satisfy the predicate
- "general_src_operand". */
-
-int
-pcrel_address (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED)
-{
- return (GET_CODE (op) == SYMBOL_REF || GET_CODE (op) == LABEL_REF
- || GET_CODE (op) == CONST);
-}
-
const char *
output_andsi3 (rtx *operands)
{
int logval;
if (GET_CODE (operands[2]) == CONST_INT
- && (INTVAL (operands[2]) | 0xffff) == 0xffffffff
+ && (INTVAL (operands[2]) | 0xffff) == -1
&& (DATA_REG_P (operands[0])
|| offsettable_memref_p (operands[0]))
&& !TARGET_COLDFIRE)
|| offsettable_memref_p (operands[0])))
{
if (DATA_REG_P (operands[0]))
- {
- operands[1] = GEN_INT (logval);
- }
+ operands[1] = GEN_INT (logval);
else
{
operands[0] = adjust_address (operands[0], SImode, 3 - (logval / 8));
return "eor%.l %2,%0";
}
+/* Return the instruction that should be used for a call to address X,
+ which is known to be in operand 0. */
+
+const char *
+output_call (rtx x)
+{
+ if (symbolic_operand (x, VOIDmode))
+ return m68k_symbolic_call;
+ else
+ return "jsr %a0";
+}
+
+/* Likewise sibling calls. */
+
+const char *
+output_sibcall (rtx x)
+{
+ if (symbolic_operand (x, VOIDmode))
+ return m68k_symbolic_jump;
+ else
+ return "jmp %a0";
+}
+
#ifdef M68K_TARGET_COFF
/* Output assembly to switch to section NAME with attribute FLAGS. */
static void
-m68k_coff_asm_named_section (const char *name, unsigned int flags)
+m68k_coff_asm_named_section (const char *name, unsigned int flags,
+ tree decl ATTRIBUTE_UNUSED)
{
char flagchar;
#endif /* M68K_TARGET_COFF */
-#ifdef HPUX_ASM
static void
-m68k_hp320_internal_label (FILE *stream, const char *prefix,
- unsigned long labelno)
+m68k_output_mi_thunk (FILE *file, tree thunk ATTRIBUTE_UNUSED,
+ HOST_WIDE_INT delta, HOST_WIDE_INT vcall_offset,
+ tree function)
{
- if (prefix[0] == 'L' && prefix[1] == 'I')
- fprintf(stream, "\tset %s%ld,.+2\n", prefix, labelno);
- else
- fprintf (stream, "%s%ld:\n", prefix, labelno);
+ rtx this_slot, offset, addr, mem, insn;
+
+ /* Pretend to be a post-reload pass while generating rtl. */
+ no_new_pseudos = 1;
+ reload_completed = 1;
+ allocate_reg_info (FIRST_PSEUDO_REGISTER, true, true);
+
+ /* The "this" pointer is stored at 4(%sp). */
+ this_slot = gen_rtx_MEM (Pmode, plus_constant (stack_pointer_rtx, 4));
+
+ /* Add DELTA to THIS. */
+ if (delta != 0)
+ {
+ /* Make the offset a legitimate operand for memory addition. */
+ offset = GEN_INT (delta);
+ if ((delta < -8 || delta > 8)
+ && (TARGET_COLDFIRE || USE_MOVQ (delta)))
+ {
+ emit_move_insn (gen_rtx_REG (Pmode, D0_REG), offset);
+ offset = gen_rtx_REG (Pmode, D0_REG);
+ }
+ emit_insn (gen_add3_insn (copy_rtx (this_slot),
+ copy_rtx (this_slot), offset));
+ }
+
+ /* If needed, add *(*THIS + VCALL_OFFSET) to THIS. */
+ if (vcall_offset != 0)
+ {
+ /* Set the static chain register to *THIS. */
+ emit_move_insn (static_chain_rtx, this_slot);
+ emit_move_insn (static_chain_rtx, gen_rtx_MEM (Pmode, static_chain_rtx));
+
+ /* Set ADDR to a legitimate address for *THIS + VCALL_OFFSET. */
+ addr = plus_constant (static_chain_rtx, vcall_offset);
+ if (!m68k_legitimate_address_p (Pmode, addr, true))
+ {
+ emit_insn (gen_rtx_SET (VOIDmode, static_chain_rtx, addr));
+ addr = static_chain_rtx;
+ }
+
+ /* Load the offset into %d0 and add it to THIS. */
+ emit_move_insn (gen_rtx_REG (Pmode, D0_REG),
+ gen_rtx_MEM (Pmode, addr));
+ emit_insn (gen_add3_insn (copy_rtx (this_slot),
+ copy_rtx (this_slot),
+ gen_rtx_REG (Pmode, D0_REG)));
+ }
+
+ /* Jump to the target function. Use a sibcall if direct jumps are
+ allowed, otherwise load the address into a register first. */
+ mem = DECL_RTL (function);
+ if (!sibcall_operand (XEXP (mem, 0), VOIDmode))
+ {
+ gcc_assert (flag_pic);
+
+ if (!TARGET_SEP_DATA)
+ {
+ /* Use the static chain register as a temporary (call-clobbered)
+ GOT pointer for this function. We can use the static chain
+ register because it isn't live on entry to the thunk. */
+ REGNO (pic_offset_table_rtx) = STATIC_CHAIN_REGNUM;
+ emit_insn (gen_load_got (pic_offset_table_rtx));
+ }
+ legitimize_pic_address (XEXP (mem, 0), Pmode, static_chain_rtx);
+ mem = replace_equiv_address (mem, static_chain_rtx);
+ }
+ insn = emit_call_insn (gen_sibcall (mem, const0_rtx));
+ SIBLING_CALL_P (insn) = 1;
+
+ /* Run just enough of rest_of_compilation. */
+ insn = get_insns ();
+ split_all_insns_noflow ();
+ final_start_function (insn, file, 1);
+ final (insn, file, 1);
+ final_end_function ();
+
+ /* Clean up the vars set above. */
+ reload_completed = 0;
+ no_new_pseudos = 0;
+
+ /* Restore the original PIC register. */
+ if (flag_pic)
+ REGNO (pic_offset_table_rtx) = PIC_REG;
}
-static void
-m68k_hp320_file_start (void)
+/* Worker function for TARGET_STRUCT_VALUE_RTX. */
+
+static rtx
+m68k_struct_value_rtx (tree fntype ATTRIBUTE_UNUSED,
+ int incoming ATTRIBUTE_UNUSED)
{
- /* version 1: 68010.
- 2: 68020 without FPU.
- 3: 68020 with FPU. */
- fprintf (asm_out_file, "\tversion %d\n",
- TARGET_68020 ? (TARGET_68881 ? 3 : 2) : 1);
+ return gen_rtx_REG (Pmode, M68K_STRUCT_VALUE_REGNUM);
}
-#endif
-static void
-m68k_output_mi_thunk (FILE *file, tree thunk ATTRIBUTE_UNUSED,
- HOST_WIDE_INT delta,
- HOST_WIDE_INT vcall_offset ATTRIBUTE_UNUSED,
- tree function)
+/* Return nonzero if register old_reg can be renamed to register new_reg. */
+int
+m68k_hard_regno_rename_ok (unsigned int old_reg ATTRIBUTE_UNUSED,
+ unsigned int new_reg)
{
- rtx xops[1];
- const char *fmt;
- if (delta > 0 && delta <= 8)
-#ifdef MOTOROLA
- asm_fprintf (file, "\taddq.l %I%d,4(%Rsp)\n", (int) delta);
-#else
- asm_fprintf (file, "\taddql %I%d,%Rsp@(4)\n", (int) delta);
-#endif
- else if (delta < 0 && delta >= -8)
-#ifdef MOTOROLA
- asm_fprintf (file, "\tsubq.l %I%d,4(%Rsp)\n", (int) -delta);
-#else
- asm_fprintf (file, "\tsubql %I%d,%Rsp@(4)\n", (int) -delta);
-#endif
- else
-#ifdef MOTOROLA
- asm_fprintf (file, "\tadd.l %I%wd,4(%Rsp)\n", delta);
-#else
- asm_fprintf (file, "\taddl %I%wd,%Rsp@(4)\n", delta);
-#endif
+ /* Interrupt functions can only use registers that have already been
+ saved by the prologue, even if they would normally be
+ call-clobbered. */
- xops[0] = DECL_RTL (function);
+ if ((m68k_get_function_kind (current_function_decl)
+ == m68k_fk_interrupt_handler)
+ && !regs_ever_live[new_reg])
+ return 0;
- /* Logic taken from call patterns in m68k.md. */
- if (flag_pic)
+ return 1;
+}
+
+/* Value is true if hard register REGNO can hold a value of machine-mode
+ MODE. On the 68000, we let the cpu registers can hold any mode, but
+ restrict the 68881 registers to floating-point modes. */
+
+bool
+m68k_regno_mode_ok (int regno, enum machine_mode mode)
+{
+ if (DATA_REGNO_P (regno))
{
- if (TARGET_PCREL)
- fmt = "bra.l %o0";
- else
- {
-#ifdef MOTOROLA
-#ifdef HPUX_ASM
- fmt = "bra.l %0";
-#else
-#ifdef USE_GAS
- fmt = "bra.l %0@PLTPC";
-#else
- fmt = "bra %0@PLTPC";
-#endif
-#endif
-#else
-#ifdef USE_GAS
- fmt = "bra.l %0";
-#else
- fmt = "jra %0,a1";
-#endif
-#endif
- }
+ /* Data Registers, can hold aggregate if fits in. */
+ if (regno + GET_MODE_SIZE (mode) / 4 <= 8)
+ return true;
}
- else
+ else if (ADDRESS_REGNO_P (regno))
{
-#if defined (MOTOROLA) && !defined (USE_GAS)
- fmt = "jmp %0";
-#else
- fmt = "jra %0";
-#endif
+ if (regno + GET_MODE_SIZE (mode) / 4 <= 16)
+ return true;
+ }
+ else if (FP_REGNO_P (regno))
+ {
+ /* FPU registers, hold float or complex float of long double or
+ smaller. */
+ if ((GET_MODE_CLASS (mode) == MODE_FLOAT
+ || GET_MODE_CLASS (mode) == MODE_COMPLEX_FLOAT)
+ && GET_MODE_UNIT_SIZE (mode) <= TARGET_FP_REG_SIZE)
+ return true;
+ }
+ return false;
+}
+
+/* Implement SECONDARY_RELOAD_CLASS. */
+
+enum reg_class
+m68k_secondary_reload_class (enum reg_class rclass,
+ enum machine_mode mode, rtx x)
+{
+ int regno;
+
+ regno = true_regnum (x);
+
+ /* If one operand of a movqi is an address register, the other
+ operand must be a general register or constant. Other types
+ of operand must be reloaded through a data register. */
+ if (GET_MODE_SIZE (mode) == 1
+ && reg_classes_intersect_p (rclass, ADDR_REGS)
+ && !(INT_REGNO_P (regno) || CONSTANT_P (x)))
+ return DATA_REGS;
+
+ /* PC-relative addresses must be loaded into an address register first. */
+ if (TARGET_PCREL
+ && !reg_class_subset_p (rclass, ADDR_REGS)
+ && symbolic_operand (x, VOIDmode))
+ return ADDR_REGS;
+
+ return NO_REGS;
+}
+
+/* Implement PREFERRED_RELOAD_CLASS. */
+
+enum reg_class
+m68k_preferred_reload_class (rtx x, enum reg_class rclass)
+{
+ enum reg_class secondary_class;
+
+ /* If RCLASS might need a secondary reload, try restricting it to
+ a class that doesn't. */
+ secondary_class = m68k_secondary_reload_class (rclass, GET_MODE (x), x);
+ if (secondary_class != NO_REGS
+ && reg_class_subset_p (secondary_class, rclass))
+ return secondary_class;
+
+ /* Prefer to use moveq for in-range constants. */
+ if (GET_CODE (x) == CONST_INT
+ && reg_class_subset_p (DATA_REGS, rclass)
+ && IN_RANGE (INTVAL (x), -0x80, 0x7f))
+ return DATA_REGS;
+
+ /* ??? Do we really need this now? */
+ if (GET_CODE (x) == CONST_DOUBLE
+ && GET_MODE_CLASS (GET_MODE (x)) == MODE_FLOAT)
+ {
+ if (TARGET_HARD_FLOAT && reg_class_subset_p (FP_REGS, rclass))
+ return FP_REGS;
+
+ return NO_REGS;
}
- output_asm_insn (fmt, xops);
+ return rclass;
+}
+
+/* Return floating point values in a 68881 register. This makes 68881 code
+ a little bit faster. It also makes -msoft-float code incompatible with
+ hard-float code, so people have to be careful not to mix the two.
+ For ColdFire it was decided the ABI incompatibility is undesirable.
+ If there is need for a hard-float ABI it is probably worth doing it
+ properly and also passing function arguments in FP registers. */
+rtx
+m68k_libcall_value (enum machine_mode mode)
+{
+ switch (mode) {
+ case SFmode:
+ case DFmode:
+ case XFmode:
+ if (TARGET_68881)
+ return gen_rtx_REG (mode, FP0_REG);
+ break;
+ default:
+ break;
+ }
+ return gen_rtx_REG (mode, D0_REG);
+}
+
+rtx
+m68k_function_value (tree valtype, tree func ATTRIBUTE_UNUSED)
+{
+ enum machine_mode mode;
+
+ mode = TYPE_MODE (valtype);
+ switch (mode) {
+ case SFmode:
+ case DFmode:
+ case XFmode:
+ if (TARGET_68881)
+ return gen_rtx_REG (mode, FP0_REG);
+ break;
+ default:
+ break;
+ }
+
+ /* If the function returns a pointer, push that into %a0. */
+ if (func && POINTER_TYPE_P (TREE_TYPE (TREE_TYPE (func))))
+ /* For compatibility with the large body of existing code which
+ does not always properly declare external functions returning
+ pointer types, the m68k/SVR4 convention is to copy the value
+ returned for pointer functions from a0 to d0 in the function
+ epilogue, so that callers that have neglected to properly
+ declare the callee can still find the correct return value in
+ d0. */
+ return gen_rtx_PARALLEL
+ (mode,
+ gen_rtvec (2,
+ gen_rtx_EXPR_LIST (VOIDmode,
+ gen_rtx_REG (mode, A0_REG),
+ const0_rtx),
+ gen_rtx_EXPR_LIST (VOIDmode,
+ gen_rtx_REG (mode, D0_REG),
+ const0_rtx)));
+ else if (POINTER_TYPE_P (valtype))
+ return gen_rtx_REG (mode, A0_REG);
+ else
+ return gen_rtx_REG (mode, D0_REG);
}