/* Definitions of target machine for GNU compiler. MIPS version.
- Copyright (C) 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998
- 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2007, 2008, 2009, 2010, 2011
- 2012
- Free Software Foundation, Inc.
+ Copyright (C) 1989-2015 Free Software Foundation, Inc.
Contributed by A. Lichnewsky (lich@inria.inria.fr).
Changed by Michael Meissner (meissner@osf.org).
64-bit r4000 support by Ian Lance Taylor (ian@cygnus.com) and
PTF_AVOID_BRANCHLIKELY
Set if it is usually not profitable to use branch-likely instructions
for this target, typically because the branches are always predicted
- taken and so incur a large overhead when not taken. */
-#define PTF_AVOID_BRANCHLIKELY 0x1
+ taken and so incur a large overhead when not taken.
+
+ PTF_AVOID_IMADD
+ Set if it is usually not profitable to use the integer MADD or MSUB
+ instructions because of the overhead of getting the result out of
+ the HI/LO registers. */
+
+#define PTF_AVOID_BRANCHLIKELY 0x1
+#define PTF_AVOID_IMADD 0x2
/* Information about one recognized processor. Defined here for the
benefit of TARGET_CPU_CPP_BUILTINS. */
#define ISA_HAS_DSP_MULT ISA_HAS_DSPR2
#endif
+/* ISA has LSA available. */
+#define ISA_HAS_LSA (mips_isa_rev >= 6)
+
+/* ISA has DLSA available. */
+#define ISA_HAS_DLSA (TARGET_64BIT && mips_isa_rev >= 6)
+
+/* The ISA compression flags that are currently in effect. */
+#define TARGET_COMPRESSION (target_flags & (MASK_MIPS16 | MASK_MICROMIPS))
+
/* Generate mips16 code */
#define TARGET_MIPS16 ((target_flags & MASK_MIPS16) != 0)
/* Generate mips16e code. Default 16bit ASE for mips32* and mips64* */
#define ISA_MIPS4 (mips_isa == 4)
#define ISA_MIPS32 (mips_isa == 32)
#define ISA_MIPS32R2 (mips_isa == 33)
+#define ISA_MIPS32R3 (mips_isa == 34)
+#define ISA_MIPS32R5 (mips_isa == 36)
+#define ISA_MIPS32R6 (mips_isa == 37)
#define ISA_MIPS64 (mips_isa == 64)
#define ISA_MIPS64R2 (mips_isa == 65)
+#define ISA_MIPS64R3 (mips_isa == 66)
+#define ISA_MIPS64R5 (mips_isa == 68)
+#define ISA_MIPS64R6 (mips_isa == 69)
/* Architecture target defines. */
#define TARGET_LOONGSON_2E (mips_arch == PROCESSOR_LOONGSON_2E)
#define TARGET_MIPS4130 (mips_arch == PROCESSOR_R4130)
#define TARGET_MIPS5400 (mips_arch == PROCESSOR_R5400)
#define TARGET_MIPS5500 (mips_arch == PROCESSOR_R5500)
+#define TARGET_MIPS5900 (mips_arch == PROCESSOR_R5900)
#define TARGET_MIPS7000 (mips_arch == PROCESSOR_R7000)
#define TARGET_MIPS9000 (mips_arch == PROCESSOR_R9000)
#define TARGET_OCTEON (mips_arch == PROCESSOR_OCTEON \
- || mips_arch == PROCESSOR_OCTEON2)
-#define TARGET_OCTEON2 (mips_arch == PROCESSOR_OCTEON2)
+ || mips_arch == PROCESSOR_OCTEON2 \
+ || mips_arch == PROCESSOR_OCTEON3)
+#define TARGET_OCTEON2 (mips_arch == PROCESSOR_OCTEON2 \
+ || mips_arch == PROCESSOR_OCTEON3)
#define TARGET_SB1 (mips_arch == PROCESSOR_SB1 \
|| mips_arch == PROCESSOR_SB1A)
#define TARGET_SR71K (mips_arch == PROCESSOR_SR71000)
+#define TARGET_XLP (mips_arch == PROCESSOR_XLP)
/* Scheduling target defines. */
#define TUNE_20KC (mips_tune == PROCESSOR_20KC)
#define TUNE_MIPS7000 (mips_tune == PROCESSOR_R7000)
#define TUNE_MIPS9000 (mips_tune == PROCESSOR_R9000)
#define TUNE_OCTEON (mips_tune == PROCESSOR_OCTEON \
- || mips_tune == PROCESSOR_OCTEON2)
+ || mips_tune == PROCESSOR_OCTEON2 \
+ || mips_tune == PROCESSOR_OCTEON3)
#define TUNE_SB1 (mips_tune == PROCESSOR_SB1 \
|| mips_tune == PROCESSOR_SB1A)
+#define TUNE_P5600 (mips_tune == PROCESSOR_P5600)
/* Whether vector modes and intrinsics for ST Microelectronics
Loongson-2E/2F processors should be enabled. In o32 pairs of
#define TUNE_MACC_CHAINS (TUNE_MIPS5500 \
|| TUNE_MIPS4120 \
|| TUNE_MIPS4130 \
- || TUNE_24K)
+ || TUNE_24K \
+ || TUNE_P5600)
#define TARGET_OLDABI (mips_abi == ABI_32 || mips_abi == ABI_O64)
#define TARGET_NEWABI (mips_abi == ABI_N32 || mips_abi == ABI_64)
#define TARGET_HARD_FLOAT (TARGET_HARD_FLOAT_ABI && !TARGET_MIPS16)
#define TARGET_SOFT_FLOAT (TARGET_SOFT_FLOAT_ABI || TARGET_MIPS16)
+/* TARGET_FLOAT64 represents -mfp64 and TARGET_FLOATXX represents
+ -mfpxx, derive TARGET_FLOAT32 to represent -mfp32. */
+#define TARGET_FLOAT32 (!TARGET_FLOAT64 && !TARGET_FLOATXX)
+
+/* TARGET_O32_FP64A_ABI represents all the conditions that form the
+ o32 FP64A ABI extension (-mabi=32 -mfp64 -mno-odd-spreg). */
+#define TARGET_O32_FP64A_ABI (mips_abi == ABI_32 && TARGET_FLOAT64 \
+ && !TARGET_ODD_SPREG)
+
/* False if SC acts as a memory barrier with respect to itself,
otherwise a SYNC will be emitted after SC for atomic operations
that require ordering between the SC and following loads and
stores. It does not tell anything about ordering of loads and
stores prior to and following the SC, only about the SC itself and
those loads and stores follow it. */
-#define TARGET_SYNC_AFTER_SC (!TARGET_OCTEON)
+#define TARGET_SYNC_AFTER_SC (!TARGET_OCTEON && !TARGET_XLP)
/* Define preprocessor macros for the -march and -mtune options.
PREFIX is either _MIPS_ARCH or _MIPS_TUNE, INFO is the selected
\
if (TARGET_FLOAT64) \
builtin_define ("__mips_fpr=64"); \
+ else if (TARGET_FLOATXX) \
+ builtin_define ("__mips_fpr=0"); \
else \
builtin_define ("__mips_fpr=32"); \
\
- if (mips_base_mips16) \
+ if (mips_base_compression_flags & MASK_MIPS16) \
builtin_define ("__mips16"); \
\
if (TARGET_MIPS3D) \
if (TARGET_SMARTMIPS) \
builtin_define ("__mips_smartmips"); \
\
+ if (mips_base_compression_flags & MASK_MICROMIPS) \
+ builtin_define ("__mips_micromips"); \
+ \
+ if (TARGET_MCU) \
+ builtin_define ("__mips_mcu"); \
+ \
+ if (TARGET_EVA) \
+ builtin_define ("__mips_eva"); \
+ \
if (TARGET_DSP) \
{ \
builtin_define ("__mips_dsp"); \
builtin_define ("__mips=4"); \
builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS4"); \
} \
- else if (ISA_MIPS32) \
- { \
- builtin_define ("__mips=32"); \
- builtin_define ("__mips_isa_rev=1"); \
- builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS32"); \
- } \
- else if (ISA_MIPS32R2) \
+ else if (mips_isa >= 32 && mips_isa < 64) \
{ \
builtin_define ("__mips=32"); \
- builtin_define ("__mips_isa_rev=2"); \
builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS32"); \
} \
- else if (ISA_MIPS64) \
- { \
- builtin_define ("__mips=64"); \
- builtin_define ("__mips_isa_rev=1"); \
- builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS64"); \
- } \
- else if (ISA_MIPS64R2) \
+ else if (mips_isa >= 64) \
{ \
builtin_define ("__mips=64"); \
- builtin_define ("__mips_isa_rev=2"); \
builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS64"); \
} \
+ if (mips_isa_rev > 0) \
+ builtin_define_with_int_value ("__mips_isa_rev", \
+ mips_isa_rev); \
\
switch (mips_abi) \
{ \
builtin_define_with_int_value ("_MIPS_SZPTR", POINTER_SIZE); \
builtin_define_with_int_value ("_MIPS_FPSET", \
32 / MAX_FPRS_PER_FMT); \
+ builtin_define_with_int_value ("_MIPS_SPFPSET", \
+ TARGET_ODD_SPREG ? 32 : 16); \
\
/* These defines reflect the ABI in use, not whether the \
FPU is directly accessible. */ \
if (TARGET_PAIRED_SINGLE_FLOAT) \
builtin_define ("__mips_paired_single_float"); \
\
+ if (mips_abs == MIPS_IEEE_754_2008) \
+ builtin_define ("__mips_abs2008"); \
+ \
+ if (mips_nan == MIPS_IEEE_754_2008) \
+ builtin_define ("__mips_nan2008"); \
+ \
if (TARGET_BIG_ENDIAN) \
{ \
builtin_define_std ("MIPSEB"); \
if (TARGET_OCTEON) \
builtin_define ("__OCTEON__"); \
\
+ if (TARGET_SYNCI) \
+ builtin_define ("__mips_synci"); \
+ \
/* Macros dependent on the C dialect. */ \
if (preprocessing_asm_p ()) \
{ \
#define TARGET_ENDIAN_DEFAULT MASK_BIG_ENDIAN
#endif
-#ifndef TARGET_FP_EXCEPTIONS_DEFAULT
-#define TARGET_FP_EXCEPTIONS_DEFAULT MASK_FP_EXCEPTIONS
-#endif
-
#ifdef IN_LIBGCC2
#undef TARGET_64BIT
/* Make this compile time constant for libgcc2 */
#endif
#ifndef MULTILIB_ISA_DEFAULT
-# if MIPS_ISA_DEFAULT == 1
-# define MULTILIB_ISA_DEFAULT "mips1"
-# else
-# if MIPS_ISA_DEFAULT == 2
-# define MULTILIB_ISA_DEFAULT "mips2"
-# else
-# if MIPS_ISA_DEFAULT == 3
-# define MULTILIB_ISA_DEFAULT "mips3"
-# else
-# if MIPS_ISA_DEFAULT == 4
-# define MULTILIB_ISA_DEFAULT "mips4"
-# else
-# if MIPS_ISA_DEFAULT == 32
-# define MULTILIB_ISA_DEFAULT "mips32"
-# else
-# if MIPS_ISA_DEFAULT == 33
-# define MULTILIB_ISA_DEFAULT "mips32r2"
-# else
-# if MIPS_ISA_DEFAULT == 64
-# define MULTILIB_ISA_DEFAULT "mips64"
-# else
-# if MIPS_ISA_DEFAULT == 65
-# define MULTILIB_ISA_DEFAULT "mips64r2"
-# else
-# define MULTILIB_ISA_DEFAULT "mips1"
-# endif
-# endif
-# endif
-# endif
-# endif
-# endif
-# endif
-# endif
+#if MIPS_ISA_DEFAULT == 1
+#define MULTILIB_ISA_DEFAULT "mips1"
+#elif MIPS_ISA_DEFAULT == 2
+#define MULTILIB_ISA_DEFAULT "mips2"
+#elif MIPS_ISA_DEFAULT == 3
+#define MULTILIB_ISA_DEFAULT "mips3"
+#elif MIPS_ISA_DEFAULT == 4
+#define MULTILIB_ISA_DEFAULT "mips4"
+#elif MIPS_ISA_DEFAULT == 32
+#define MULTILIB_ISA_DEFAULT "mips32"
+#elif MIPS_ISA_DEFAULT == 33
+#define MULTILIB_ISA_DEFAULT "mips32r2"
+#elif MIPS_ISA_DEFAULT == 37
+#define MULTILIB_ISA_DEFAULT "mips32r6"
+#elif MIPS_ISA_DEFAULT == 64
+#define MULTILIB_ISA_DEFAULT "mips64"
+#elif MIPS_ISA_DEFAULT == 65
+#define MULTILIB_ISA_DEFAULT "mips64r2"
+#elif MIPS_ISA_DEFAULT == 69
+#define MULTILIB_ISA_DEFAULT "mips64r6"
+#else
+#define MULTILIB_ISA_DEFAULT "mips1"
+#endif
#endif
#ifndef MIPS_ABI_DEFAULT
#if MIPS_ABI_DEFAULT == ABI_32
#define MULTILIB_ABI_DEFAULT "mabi=32"
-#endif
-
-#if MIPS_ABI_DEFAULT == ABI_O64
+#elif MIPS_ABI_DEFAULT == ABI_O64
#define MULTILIB_ABI_DEFAULT "mabi=o64"
-#endif
-
-#if MIPS_ABI_DEFAULT == ABI_N32
+#elif MIPS_ABI_DEFAULT == ABI_N32
#define MULTILIB_ABI_DEFAULT "mabi=n32"
-#endif
-
-#if MIPS_ABI_DEFAULT == ABI_64
+#elif MIPS_ABI_DEFAULT == ABI_64
#define MULTILIB_ABI_DEFAULT "mabi=64"
-#endif
-
-#if MIPS_ABI_DEFAULT == ABI_EABI
+#elif MIPS_ABI_DEFAULT == ABI_EABI
#define MULTILIB_ABI_DEFAULT "mabi=eabi"
#endif
#define MIPS_ARCH_OPTION_SPEC \
MIPS_ISA_LEVEL_OPTION_SPEC "|march=*"
-/* A spec that infers a -mips argument from an -march argument,
- or injects the default if no architecture is specified. */
+/* A spec that infers a -mips argument from an -march argument. */
#define MIPS_ISA_LEVEL_SPEC \
"%{" MIPS_ISA_LEVEL_OPTION_SPEC ":;: \
|march=r10000|march=r12000|march=r14000|march=r16000:-mips4} \
%{march=mips32|march=4kc|march=4km|march=4kp|march=4ksc:-mips32} \
%{march=mips32r2|march=m4k|march=4ke*|march=4ksd|march=24k* \
- |march=34k*|march=74k*|march=1004k*: -mips32r2} \
+ |march=34k*|march=74k*|march=m14k*|march=1004k*: -mips32r2} \
+ %{march=mips32r3: -mips32r3} \
+ %{march=mips32r5|march=p5600: -mips32r5} \
+ %{march=mips32r6: -mips32r6} \
%{march=mips64|march=5k*|march=20k*|march=sb1*|march=sr71000 \
- |march=xlr|march=loongson3a: -mips64} \
- %{march=mips64r2|march=octeon: -mips64r2} \
+ |march=xlr: -mips64} \
+ %{march=mips64r2|march=loongson3a|march=octeon|march=xlp: -mips64r2} \
+ %{march=mips64r3: -mips64r3} \
+ %{march=mips64r5: -mips64r5} \
+ %{march=mips64r6: -mips64r6}}"
+
+/* A spec that injects the default multilib ISA if no architecture is
+ specified. */
+
+#define MIPS_DEFAULT_ISA_LEVEL_SPEC \
+ "%{" MIPS_ISA_LEVEL_OPTION_SPEC ":;: \
%{!march=*: -" MULTILIB_ISA_DEFAULT "}}"
/* A spec that infers a -mhard-float or -msoft-float setting from an
link-compatible. */
#define MIPS_ARCH_FLOAT_SPEC \
- "%{mhard-float|msoft-float|march=mips*:; \
+ "%{mhard-float|msoft-float|mno-float|march=mips*:; \
march=vr41*|march=m4k|march=4k*|march=24kc|march=24kec \
- |march=34kc|march=74kc|march=1004kc|march=5kc \
- |march=octeon|march=xlr: -msoft-float; \
+ |march=34kc|march=34kn|march=74kc|march=1004kc|march=5kc \
+ |march=m14k*|march=octeon|march=xlr: -msoft-float; \
march=*: -mhard-float}"
/* A spec condition that matches 32-bit options. It only works if
#define MIPS_32BIT_OPTION_SPEC \
"mips1|mips2|mips32*|mgp32"
-#if MIPS_ABI_DEFAULT == ABI_O64 \
- || MIPS_ABI_DEFAULT == ABI_N32 \
- || MIPS_ABI_DEFAULT == ABI_64
+/* A spec condition that matches architectures should be targeted with
+ o32 FPXX for compatibility reasons. */
+#define MIPS_FPXX_OPTION_SPEC \
+ "mips2|mips3|mips4|mips5|mips32|mips32r2|mips32r3|mips32r5| \
+ mips64|mips64r2|mips64r3|mips64r5"
+
+/* Infer a -msynci setting from a -mips argument, on the assumption that
+ -msynci is desired where possible. */
+#define MIPS_ISA_SYNCI_SPEC \
+ "%{msynci|mno-synci:;:%{mips32r2|mips32r3|mips32r5|mips32r6|mips64r2 \
+ |mips64r3|mips64r5|mips64r6:-msynci;:-mno-synci}}"
+
+/* Infer a -mnan=2008 setting from a -mips argument. */
+#define MIPS_ISA_NAN2008_SPEC \
+ "%{mnan*:;mips32r6|mips64r6:-mnan=2008}"
+
+#if (MIPS_ABI_DEFAULT == ABI_O64 \
+ || MIPS_ABI_DEFAULT == ABI_N32 \
+ || MIPS_ABI_DEFAULT == ABI_64)
#define OPT_ARCH64 "mabi=32|mgp32:;"
#define OPT_ARCH32 "mabi=32|mgp32"
#else
--with-abi is ignored if -mabi is specified.
--with-float is ignored if -mhard-float or -msoft-float are
specified.
+ --with-fpu is ignored if -msoft-float, -msingle-float or -mdouble-float are
+ specified.
+ --with-nan is ignored if -mnan is specified.
+ --with-fp-32 is ignored if -msoft-float, -msingle-float or -mfp are specified.
+ --with-odd-spreg-32 is ignored if -msoft-float, -msingle-float, -modd-spreg
+ or -mno-odd-spreg are specified.
--with-divide is ignored if -mdivide-traps or -mdivide-breaks are
specified. */
#define OPTION_DEFAULT_SPECS \
{"tune_64", "%{" OPT_ARCH64 ":%{!mtune=*:-mtune=%(VALUE)}}" }, \
{"abi", "%{!mabi=*:-mabi=%(VALUE)}" }, \
{"float", "%{!msoft-float:%{!mhard-float:-m%(VALUE)-float}}" }, \
+ {"fpu", "%{!msoft-float:%{!msingle-float:%{!mdouble-float:-m%(VALUE)-float}}}" }, \
+ {"nan", "%{!mnan=*:-mnan=%(VALUE)}" }, \
+ {"fp_32", "%{" OPT_ARCH32 \
+ ":%{!msoft-float:%{!msingle-float:%{!mfp*:-mfp%(VALUE)}}}}" }, \
+ {"odd_spreg_32", "%{" OPT_ARCH32 ":%{!msoft-float:%{!msingle-float:" \
+ "%{!modd-spreg:%{!mno-odd-spreg:-m%(VALUE)}}}}}" }, \
{"divide", "%{!mdivide-traps:%{!mdivide-breaks:-mdivide-%(VALUE)}}" }, \
{"llsc", "%{!mllsc:%{!mno-llsc:-m%(VALUE)}}" }, \
{"mips-plt", "%{!mplt:%{!mno-plt:-m%(VALUE)}}" }, \
{"synci", "%{!msynci:%{!mno-synci:-m%(VALUE)}}" }
-
-/* A spec that infers the -mdsp setting from an -march argument. */
+/* A spec that infers the:
+ -mnan=2008 setting from a -mips argument,
+ -mdsp setting from a -march argument. */
#define BASE_DRIVER_SELF_SPECS \
+ MIPS_ISA_NAN2008_SPEC, \
"%{!mno-dsp: \
- %{march=24ke*|march=34k*|march=1004k*: -mdsp} \
- %{march=74k*:%{!mno-dspr2: -mdspr2 -mdsp}}}"
+ %{march=24ke*|march=34kc*|march=34kf*|march=34kx*|march=1004k*: -mdsp} \
+ %{march=74k*|march=m14ke*: %{!mno-dspr2: -mdspr2 -mdsp}}}"
-#define DRIVER_SELF_SPECS BASE_DRIVER_SELF_SPECS
+#define DRIVER_SELF_SPECS \
+ MIPS_ISA_LEVEL_SPEC, \
+ BASE_DRIVER_SELF_SPECS
#define GENERATE_DIVIDE_TRAPS (TARGET_DIVIDE_TRAPS \
&& ISA_HAS_COND_TRAP)
#define ISA_HAS_64BIT_REGS (ISA_MIPS3 \
|| ISA_MIPS4 \
|| ISA_MIPS64 \
- || ISA_MIPS64R2)
+ || ISA_MIPS64R2 \
+ || ISA_MIPS64R3 \
+ || ISA_MIPS64R5 \
+ || ISA_MIPS64R6)
+
+#define ISA_HAS_JR (mips_isa_rev <= 5)
/* ISA has branch likely instructions (e.g. mips2). */
/* Disable branchlikely for tx39 until compare rewrite. They haven't
been generated up to this point. */
-#define ISA_HAS_BRANCHLIKELY (!ISA_MIPS1)
+#define ISA_HAS_BRANCHLIKELY (!ISA_MIPS1 && mips_isa_rev <= 5)
+
+/* ISA has 32 single-precision registers. */
+#define ISA_HAS_ODD_SPREG ((mips_isa_rev >= 1 \
+ && !TARGET_LOONGSON_3A) \
+ || TARGET_FLOAT64 \
+ || TARGET_MIPS5900)
/* ISA has a three-operand multiplication instruction (usually spelt "mul"). */
#define ISA_HAS_MUL3 ((TARGET_MIPS3900 \
|| TARGET_MIPS5400 \
|| TARGET_MIPS5500 \
+ || TARGET_MIPS5900 \
|| TARGET_MIPS7000 \
|| TARGET_MIPS9000 \
|| TARGET_MAD \
- || ISA_MIPS32 \
- || ISA_MIPS32R2 \
- || ISA_MIPS64 \
- || ISA_MIPS64R2) \
+ || (mips_isa_rev >= 1 \
+ && mips_isa_rev <= 5)) \
&& !TARGET_MIPS16)
/* ISA has a three-operand multiplication instruction. */
&& TARGET_OCTEON \
&& !TARGET_MIPS16)
+/* ISA has HI and LO registers. */
+#define ISA_HAS_HILO (mips_isa_rev <= 5)
+
+/* ISA supports instructions DMULT and DMULTU. */
+#define ISA_HAS_DMULT (TARGET_64BIT \
+ && !TARGET_MIPS5900 \
+ && mips_isa_rev <= 5)
+
+/* ISA supports instructions MULT and MULTU. */
+#define ISA_HAS_MULT (mips_isa_rev <= 5)
+
+/* ISA supports instructions MUL, MULU, MUH, MUHU. */
+#define ISA_HAS_R6MUL (mips_isa_rev >= 6)
+
+/* ISA supports instructions DMUL, DMULU, DMUH, DMUHU. */
+#define ISA_HAS_R6DMUL (TARGET_64BIT && mips_isa_rev >= 6)
+
+/* ISA supports instructions DDIV and DDIVU. */
+#define ISA_HAS_DDIV (TARGET_64BIT \
+ && !TARGET_MIPS5900 \
+ && mips_isa_rev <= 5)
+
+/* ISA supports instructions DIV and DIVU.
+ This is always true, but the macro is needed for ISA_HAS_<D>DIV
+ in mips.md. */
+#define ISA_HAS_DIV (mips_isa_rev <= 5)
+
+#define ISA_HAS_DIV3 ((TARGET_LOONGSON_2EF \
+ || TARGET_LOONGSON_3A) \
+ && !TARGET_MIPS16)
+
+/* ISA supports instructions DIV, DIVU, MOD and MODU. */
+#define ISA_HAS_R6DIV (mips_isa_rev >= 6)
+
+/* ISA supports instructions DDIV, DDIVU, DMOD and DMODU. */
+#define ISA_HAS_R6DDIV (TARGET_64BIT && mips_isa_rev >= 6)
+
/* ISA has the floating-point conditional move instructions introduced
in mips4. */
#define ISA_HAS_FP_CONDMOVE ((ISA_MIPS4 \
- || ISA_MIPS32 \
- || ISA_MIPS32R2 \
- || ISA_MIPS64 \
- || ISA_MIPS64R2) \
+ || (mips_isa_rev >= 1 \
+ && mips_isa_rev <= 5)) \
&& !TARGET_MIPS5500 \
&& !TARGET_MIPS16)
/* ISA has the integer conditional move instructions introduced in mips4 and
ST Loongson 2E/2F. */
-#define ISA_HAS_CONDMOVE (ISA_HAS_FP_CONDMOVE || TARGET_LOONGSON_2EF)
+#define ISA_HAS_CONDMOVE (ISA_HAS_FP_CONDMOVE \
+ || TARGET_MIPS5900 \
+ || TARGET_LOONGSON_2EF)
/* ISA has LDC1 and SDC1. */
-#define ISA_HAS_LDC1_SDC1 (!ISA_MIPS1 && !TARGET_MIPS16)
+#define ISA_HAS_LDC1_SDC1 (!ISA_MIPS1 \
+ && !TARGET_MIPS5900 \
+ && !TARGET_MIPS16)
/* ISA has the mips4 FP condition code instructions: FP-compare to CC,
branch on CC, and move (both FP and non-FP) on CC. */
#define ISA_HAS_8CC (ISA_MIPS4 \
- || ISA_MIPS32 \
- || ISA_MIPS32R2 \
- || ISA_MIPS64 \
- || ISA_MIPS64R2)
+ || (mips_isa_rev >= 1 \
+ && mips_isa_rev <= 5))
+
+/* ISA has the FP condition code instructions that store the flag in an
+ FP register. */
+#define ISA_HAS_CCF (mips_isa_rev >= 6)
+
+#define ISA_HAS_SEL (mips_isa_rev >= 6)
/* This is a catch all for other mips4 instructions: indexed load, the
FP madd and msub instructions, and the FP recip and recip sqrt
- instructions. */
+ instructions. Note that this macro should only be used by other
+ ISA_HAS_* macros. */
#define ISA_HAS_FP4 ((ISA_MIPS4 \
- || (ISA_MIPS32R2 && TARGET_FLOAT64) \
|| ISA_MIPS64 \
- || ISA_MIPS64R2) \
+ || (mips_isa_rev >= 2 \
+ && mips_isa_rev <= 5)) \
&& !TARGET_MIPS16)
+/* ISA has floating-point indexed load and store instructions
+ (LWXC1, LDXC1, SWXC1 and SDXC1). */
+#define ISA_HAS_LXC1_SXC1 ISA_HAS_FP4
+
/* ISA has paired-single instructions. */
-#define ISA_HAS_PAIRED_SINGLE (ISA_MIPS32R2 || ISA_MIPS64 || ISA_MIPS64R2)
+#define ISA_HAS_PAIRED_SINGLE (ISA_MIPS64 \
+ || (mips_isa_rev >= 2 \
+ && mips_isa_rev <= 5))
/* ISA has conditional trap instructions. */
#define ISA_HAS_COND_TRAP (!ISA_MIPS1 \
&& !TARGET_MIPS16)
-/* ISA has integer multiply-accumulate instructions, madd and msub. */
-#define ISA_HAS_MADD_MSUB ((ISA_MIPS32 \
- || ISA_MIPS32R2 \
- || ISA_MIPS64 \
- || ISA_MIPS64R2) \
+/* ISA has conditional trap with immediate instructions. */
+#define ISA_HAS_COND_TRAPI (!ISA_MIPS1 \
+ && mips_isa_rev <= 5 \
&& !TARGET_MIPS16)
+/* ISA has integer multiply-accumulate instructions, madd and msub. */
+#define ISA_HAS_MADD_MSUB (mips_isa_rev >= 1 \
+ && mips_isa_rev <= 5)
+
/* Integer multiply-accumulate instructions should be generated. */
-#define GENERATE_MADD_MSUB (ISA_HAS_MADD_MSUB && !TUNE_74K)
+#define GENERATE_MADD_MSUB (TARGET_IMADD && !TARGET_MIPS16)
/* ISA has floating-point madd and msub instructions 'd = a * b [+-] c'. */
#define ISA_HAS_FP_MADD4_MSUB4 ISA_HAS_FP4
+/* ISA has floating-point MADDF and MSUBF instructions 'd = d [+-] a * b'. */
+#define ISA_HAS_FP_MADDF_MSUBF (mips_isa_rev >= 6)
+
/* ISA has floating-point madd and msub instructions 'c = a * b [+-] c'. */
#define ISA_HAS_FP_MADD3_MSUB3 TARGET_LOONGSON_2EF
/* ISA has floating-point nmadd and nmsub instructions
'd = -((a * b) [+-] c)'. */
-#define ISA_HAS_NMADD4_NMSUB4(MODE) \
- ((ISA_MIPS4 \
- || (ISA_MIPS32R2 && (MODE) == V2SFmode) \
- || ISA_MIPS64 \
- || ISA_MIPS64R2) \
- && (!TARGET_MIPS5400 || TARGET_MAD) \
- && !TARGET_MIPS16)
+#define ISA_HAS_NMADD4_NMSUB4 ISA_HAS_FP4
/* ISA has floating-point nmadd and nmsub instructions
'c = -((a * b) [+-] c)'. */
-#define ISA_HAS_NMADD3_NMSUB3(MODE) \
- TARGET_LOONGSON_2EF
+#define ISA_HAS_NMADD3_NMSUB3 TARGET_LOONGSON_2EF
+
+/* ISA has floating-point RECIP.fmt and RSQRT.fmt instructions. The
+ MIPS64 rev. 1 ISA says that RECIP.D and RSQRT.D are unpredictable when
+ doubles are stored in pairs of FPRs, so for safety's sake, we apply
+ this restriction to the MIPS IV ISA too. */
+#define ISA_HAS_FP_RECIP_RSQRT(MODE) \
+ (((ISA_HAS_FP4 \
+ && ((MODE) == SFmode \
+ || ((TARGET_FLOAT64 \
+ || mips_isa_rev >= 2) \
+ && (MODE) == DFmode))) \
+ || (((MODE) == SFmode \
+ || (MODE) == DFmode) \
+ && (mips_isa_rev >= 6)) \
+ || (TARGET_SB1 \
+ && (MODE) == V2SFmode)) \
+ && !TARGET_MIPS16)
+
+#define ISA_HAS_LWL_LWR (mips_isa_rev <= 5 && !TARGET_MIPS16)
+
+#define ISA_HAS_IEEE_754_LEGACY (mips_isa_rev <= 5)
+
+#define ISA_HAS_IEEE_754_2008 (mips_isa_rev >= 2)
/* ISA has count leading zeroes/ones instruction (not implemented). */
-#define ISA_HAS_CLZ_CLO ((ISA_MIPS32 \
- || ISA_MIPS32R2 \
- || ISA_MIPS64 \
- || ISA_MIPS64R2) \
- && !TARGET_MIPS16)
+#define ISA_HAS_CLZ_CLO (mips_isa_rev >= 1 && !TARGET_MIPS16)
/* ISA has three operand multiply instructions that put
the high part in an accumulator: mulhi or mulhiu. */
|| TARGET_SR71K) \
&& !TARGET_MIPS16)
-/* ISA has three operand multiply instructions that
- negates the result and puts the result in an accumulator. */
+/* ISA has three operand multiply instructions that negate the
+ result and put the result in an accumulator. */
#define ISA_HAS_MULS ((TARGET_MIPS5400 \
|| TARGET_MIPS5500 \
|| TARGET_SR71K) \
&& !TARGET_MIPS16)
-/* ISA has three operand multiply instructions that subtracts the
- result from a 4th operand and puts the result in an accumulator. */
+/* ISA has three operand multiply instructions that subtract the
+ result from a 4th operand and put the result in an accumulator. */
#define ISA_HAS_MSAC ((TARGET_MIPS5400 \
|| TARGET_MIPS5500 \
|| TARGET_SR71K) \
&& !TARGET_MIPS16)
-/* ISA has three operand multiply instructions that the result
- from a 4th operand and puts the result in an accumulator. */
+/* ISA has three operand multiply instructions that add the result
+ to a 4th operand and put the result in an accumulator. */
#define ISA_HAS_MACC ((TARGET_MIPS4120 \
|| TARGET_MIPS4130 \
|| TARGET_MIPS5400 \
&& !TARGET_MIPS16)
/* ISA has the "ror" (rotate right) instructions. */
-#define ISA_HAS_ROR ((ISA_MIPS32R2 \
- || ISA_MIPS64R2 \
+#define ISA_HAS_ROR ((mips_isa_rev >= 2 \
|| TARGET_MIPS5400 \
|| TARGET_MIPS5500 \
|| TARGET_SR71K \
|| TARGET_SMARTMIPS) \
&& !TARGET_MIPS16)
+/* ISA has the WSBH (word swap bytes within halfwords) instruction.
+ 64-bit targets also provide DSBH and DSHD. */
+#define ISA_HAS_WSBH (mips_isa_rev >= 2 && !TARGET_MIPS16)
+
/* ISA has data prefetch instructions. This controls use of 'pref'. */
#define ISA_HAS_PREFETCH ((ISA_MIPS4 \
|| TARGET_LOONGSON_2EF \
- || ISA_MIPS32 \
- || ISA_MIPS32R2 \
- || ISA_MIPS64 \
- || ISA_MIPS64R2) \
+ || TARGET_MIPS5900 \
+ || mips_isa_rev >= 1) \
&& !TARGET_MIPS16)
+/* ISA has data prefetch, LL and SC with limited 9-bit displacement. */
+#define ISA_HAS_9BIT_DISPLACEMENT (mips_isa_rev >= 6)
+
/* ISA has data indexed prefetch instructions. This controls use of
'prefx', along with TARGET_HARD_FLOAT and TARGET_DOUBLE_FLOAT.
(prefx is a cop1x instruction, so can only be used if FP is
enabled.) */
-#define ISA_HAS_PREFETCHX ((ISA_MIPS4 \
- || ISA_MIPS32R2 \
- || ISA_MIPS64 \
- || ISA_MIPS64R2) \
- && !TARGET_MIPS16)
+#define ISA_HAS_PREFETCHX ISA_HAS_FP4
/* True if trunc.w.s and trunc.w.d are real (not synthetic)
instructions. Both require TARGET_HARD_FLOAT, and trunc.w.d
#define ISA_HAS_TRUNC_W (!ISA_MIPS1)
/* ISA includes the MIPS32r2 seb and seh instructions. */
-#define ISA_HAS_SEB_SEH ((ISA_MIPS32R2 \
- || ISA_MIPS64R2) \
- && !TARGET_MIPS16)
+#define ISA_HAS_SEB_SEH (mips_isa_rev >= 2 && !TARGET_MIPS16)
/* ISA includes the MIPS32/64 rev 2 ext and ins instructions. */
-#define ISA_HAS_EXT_INS ((ISA_MIPS32R2 \
- || ISA_MIPS64R2) \
- && !TARGET_MIPS16)
+#define ISA_HAS_EXT_INS (mips_isa_rev >= 2 && !TARGET_MIPS16)
/* ISA has instructions for accessing top part of 64-bit fp regs. */
-#define ISA_HAS_MXHC1 (TARGET_FLOAT64 \
- && (ISA_MIPS32R2 \
- || ISA_MIPS64R2))
+#define ISA_HAS_MXHC1 (!TARGET_FLOAT32 \
+ && mips_isa_rev >= 2)
/* ISA has lwxs instruction (load w/scaled index address. */
-#define ISA_HAS_LWXS (TARGET_SMARTMIPS && !TARGET_MIPS16)
+#define ISA_HAS_LWXS ((TARGET_SMARTMIPS || TARGET_MICROMIPS) \
+ && !TARGET_MIPS16)
/* ISA has lbx, lbux, lhx, lhx, lhux, lwx, lwux, or ldx instruction. */
#define ISA_HAS_LBX (TARGET_OCTEON2)
and "addiu $4,$4,1". */
#define ISA_HAS_LOAD_DELAY (ISA_MIPS1 \
&& !TARGET_MIPS3900 \
- && !TARGET_MIPS16)
+ && !TARGET_MIPS5900 \
+ && !TARGET_MIPS16 \
+ && !TARGET_MICROMIPS)
/* Likewise mtc1 and mfc1. */
#define ISA_HAS_XFER_DELAY (mips_isa <= 3 \
+ && !TARGET_MIPS5900 \
&& !TARGET_LOONGSON_2EF)
/* Likewise floating-point comparisons. */
#define ISA_HAS_FCMP_DELAY (mips_isa <= 3 \
+ && !TARGET_MIPS5900 \
&& !TARGET_LOONGSON_2EF)
/* True if mflo and mfhi can be immediately followed by instructions
MIPS64 and later ISAs to have the interlocks, plus any specific
earlier-ISA CPUs for which CPU documentation declares that the
instructions are really interlocked. */
-#define ISA_HAS_HILO_INTERLOCKS (ISA_MIPS32 \
- || ISA_MIPS32R2 \
- || ISA_MIPS64 \
- || ISA_MIPS64R2 \
+#define ISA_HAS_HILO_INTERLOCKS (mips_isa_rev >= 1 \
|| TARGET_MIPS5500 \
+ || TARGET_MIPS5900 \
|| TARGET_LOONGSON_2EF)
/* ISA includes synci, jr.hb and jalr.hb. */
-#define ISA_HAS_SYNCI ((ISA_MIPS32R2 \
- || ISA_MIPS64R2) \
- && !TARGET_MIPS16)
+#define ISA_HAS_SYNCI (mips_isa_rev >= 2 && !TARGET_MIPS16)
/* ISA includes sync. */
#define ISA_HAS_SYNC ((mips_isa >= 2 || TARGET_MIPS3900) && !TARGET_MIPS16)
/* ISA includes ll and sc. Note that this implies ISA_HAS_SYNC
because the expanders use both ISA_HAS_SYNC and ISA_HAS_LL_SC
instructions. */
-#define ISA_HAS_LL_SC (mips_isa >= 2 && !TARGET_MIPS16)
+#define ISA_HAS_LL_SC (mips_isa >= 2 && !TARGET_MIPS5900 && !TARGET_MIPS16)
#define GENERATE_LL_SC \
(target_flags_explicit & MASK_LLSC \
? TARGET_LLSC && !TARGET_MIPS16 \
: ISA_HAS_LL_SC)
+#define ISA_HAS_SWAP (TARGET_XLP)
+#define ISA_HAS_LDADD (TARGET_XLP)
+
/* ISA includes the baddu instruction. */
#define ISA_HAS_BADDU (TARGET_OCTEON && !TARGET_MIPS16)
%{gcoff*:-mdebug} %{!gcoff*:-no-mdebug}"
#endif
+/* FP_ASM_SPEC represents the floating-point options that must be passed
+ to the assembler when FPXX support exists. Prior to that point the
+ assembler could accept the options but were not required for
+ correctness. We only add the options when absolutely necessary
+ because passing -msoft-float to the assembler will cause it to reject
+ all hard-float instructions which may require some user code to be
+ updated. */
+
+#ifdef HAVE_AS_DOT_MODULE
+#define FP_ASM_SPEC "\
+%{mhard-float} %{msoft-float} \
+%{msingle-float} %{mdouble-float}"
+#else
+#define FP_ASM_SPEC
+#endif
+
/* SUBTARGET_ASM_SPEC is always passed to the assembler. It may be
overridden by subtargets. */
%{G*} %(endian_spec) %{mips1} %{mips2} %{mips3} %{mips4} \
%{mips32*} %{mips64*} \
%{mips16} %{mno-mips16:-no-mips16} \
+%{mmicromips} %{mno-micromips} \
%{mips3d} %{mno-mips3d:-no-mips3d} \
%{mdmx} %{mno-mdmx:-no-mdmx} \
%{mdsp} %{mno-dsp} \
%{mdspr2} %{mno-dspr2} \
+%{mmcu} %{mno-mcu} \
+%{meva} %{mno-eva} \
+%{mvirt} %{mno-virt} \
+%{mxpa} %{mno-xpa} \
%{msmartmips} %{mno-smartmips} \
%{mmt} %{mno-mt} \
+%{mfix-rm7000} %{mno-fix-rm7000} \
%{mfix-vr4120} %{mfix-vr4130} \
%{mfix-24k} \
%{noasmopt:-O0; O0|fno-delayed-branch:-O1; O*:-O2; :-O1} \
%(subtarget_asm_debugging_spec) \
%{mabi=*} %{!mabi=*: %(asm_abi_default_spec)} \
%{mgp32} %{mgp64} %{march=*} %{mxgot:-xgot} \
-%{mfp32} %{mfp64} \
+%{mfp32} %{mfpxx} %{mfp64} %{mnan=*} \
+%{modd-spreg} %{mno-odd-spreg} \
%{mshared} %{mno-shared} \
%{msym32} %{mno-sym32} \
-%{mtune=*} \
+%{mtune=*}" \
+FP_ASM_SPEC "\
%(subtarget_asm_spec)"
/* Extra switches sometimes passed to the linker. */
/* By default, turn on GDB extensions. */
#define DEFAULT_GDB_EXTENSIONS 1
+/* Registers may have a prefix which can be ignored when matching
+ user asm and register definitions. */
+#ifndef REGISTER_PREFIX
+#define REGISTER_PREFIX "$"
+#endif
+
/* Local compiler-generated symbols must have a prefix that the assembler
understands. By default, this is $, although some targets (e.g.,
NetBSD-ELF) need to override this. */
/* The number of consecutive floating-point registers needed to store the
smallest format supported by the FPU. */
#define MIN_FPRS_PER_FMT \
- (ISA_MIPS32 || ISA_MIPS32R2 || ISA_MIPS64 || ISA_MIPS64R2 \
- ? 1 : MAX_FPRS_PER_FMT)
+ (TARGET_ODD_SPREG ? 1 : MAX_FPRS_PER_FMT)
/* The largest size of value that can be held in floating-point
registers and moved with a single instruction. */
support long double, we also want a 128-bit integer type. */
#define MAX_FIXED_MODE_SIZE LONG_DOUBLE_TYPE_SIZE
-#ifdef IN_LIBGCC2
-#if (defined _ABIN32 && _MIPS_SIM == _ABIN32) \
- || (defined _ABI64 && _MIPS_SIM == _ABI64)
-# define LIBGCC2_LONG_DOUBLE_TYPE_SIZE 128
-# else
-# define LIBGCC2_LONG_DOUBLE_TYPE_SIZE 64
-# endif
-#endif
-
/* Width in bits of a pointer. */
#ifndef POINTER_SIZE
#define POINTER_SIZE ((TARGET_LONG64 && TARGET_64BIT) ? 64 : 32)
#define COP3_REG_FIRST 144
#define COP3_REG_LAST 175
#define COP3_REG_NUM (COP3_REG_LAST - COP3_REG_FIRST + 1)
-/* ALL_COP_REG_NUM assumes that COP0,2,and 3 are numbered consecutively. */
-#define ALL_COP_REG_NUM (COP3_REG_LAST - COP0_REG_FIRST + 1)
+
+/* These definitions assume that COP0, 2 and 3 are numbered consecutively. */
+#define ALL_COP_REG_FIRST COP0_REG_FIRST
+#define ALL_COP_REG_LAST COP3_REG_LAST
+#define ALL_COP_REG_NUM (ALL_COP_REG_LAST - ALL_COP_REG_FIRST + 1)
#define DSP_ACC_REG_FIRST 176
#define DSP_ACC_REG_LAST 181
((unsigned int) ((int) (REGNO) - GP_REG_FIRST) < GP_REG_NUM)
#define M16_REG_P(REGNO) \
(((REGNO) >= 2 && (REGNO) <= 7) || (REGNO) == 16 || (REGNO) == 17)
+#define M16STORE_REG_P(REGNO) \
+ (((REGNO) >= 2 && (REGNO) <= 7) || (REGNO) == 0 || (REGNO) == 17)
#define FP_REG_P(REGNO) \
((unsigned int) ((int) (REGNO) - FP_REG_FIRST) < FP_REG_NUM)
#define MD_REG_P(REGNO) \
#define HARD_REGNO_MODE_OK(REGNO, MODE) \
mips_hard_regno_mode_ok[ (int)(MODE) ][ (REGNO) ]
+/* Select a register mode required for caller save of hard regno REGNO. */
+#define HARD_REGNO_CALLER_SAVE_MODE(REGNO, NREGS, MODE) \
+ mips_hard_regno_caller_save_mode (REGNO, NREGS, MODE)
+
+/* Odd-numbered single-precision registers are not considered callee-saved
+ for o32 FPXX as they will be clobbered when run on an FR=1 FPU. */
+#define HARD_REGNO_CALL_PART_CLOBBERED(REGNO, MODE) \
+ (TARGET_FLOATXX && hard_regno_nregs[REGNO][MODE] == 1 \
+ && FP_REG_P (REGNO) && ((REGNO) & 1))
+
#define MODES_TIEABLE_P mips_modes_tieable_p
/* Register to use for pushing function arguments. */
- The prologue can use MIPS_PROLOGUE_TEMP as a general temporary
register. The register must not conflict with MIPS16_PIC_TEMP.
+ - If we aren't generating MIPS16 code, the prologue can also use
+ MIPS_PROLOGUE_TEMP2 as a general temporary register.
+
- The epilogue can use MIPS_EPILOGUE_TEMP as a general temporary
register.
#define MIPS16_PIC_TEMP_REGNUM (GP_REG_FIRST + 2)
#define MIPS_PROLOGUE_TEMP_REGNUM \
(cfun->machine->interrupt_handler_p ? K0_REG_NUM : GP_REG_FIRST + 3)
+#define MIPS_PROLOGUE_TEMP2_REGNUM \
+ (TARGET_MIPS16 \
+ ? (gcc_unreachable (), INVALID_REGNUM) \
+ : cfun->machine->interrupt_handler_p ? K1_REG_NUM : GP_REG_FIRST + 12)
#define MIPS_EPILOGUE_TEMP_REGNUM \
(cfun->machine->interrupt_handler_p \
? K0_REG_NUM \
#define MIPS16_PIC_TEMP gen_rtx_REG (Pmode, MIPS16_PIC_TEMP_REGNUM)
#define MIPS_PROLOGUE_TEMP(MODE) gen_rtx_REG (MODE, MIPS_PROLOGUE_TEMP_REGNUM)
+#define MIPS_PROLOGUE_TEMP2(MODE) \
+ gen_rtx_REG (MODE, MIPS_PROLOGUE_TEMP2_REGNUM)
#define MIPS_EPILOGUE_TEMP(MODE) gen_rtx_REG (MODE, MIPS_EPILOGUE_TEMP_REGNUM)
/* Define this macro if it is as good or better to call a constant
enum reg_class
{
NO_REGS, /* no registers in set */
+ M16_STORE_REGS, /* microMIPS store registers */
M16_REGS, /* mips16 directly accessible registers */
+ M16_SP_REGS, /* mips16 + $sp */
T_REG, /* mips16 T register ($24) */
M16_T_REGS, /* mips16 registers plus T register */
PIC_FN_ADDR_REG, /* SVR4 PIC function address register */
V1_REG, /* Register $v1 ($3) used for TLS access. */
+ SPILL_REGS, /* All but $sp and call preserved regs are in here */
LEA_REGS, /* Every GPR except $25 */
GR_REGS, /* integer registers */
FP_REGS, /* floating point registers */
#define REG_CLASS_NAMES \
{ \
"NO_REGS", \
+ "M16_STORE_REGS", \
"M16_REGS", \
+ "M16_SP_REGS", \
"T_REG", \
"M16_T_REGS", \
"PIC_FN_ADDR_REG", \
"V1_REG", \
+ "SPILL_REGS", \
"LEA_REGS", \
"GR_REGS", \
"FP_REGS", \
#define REG_CLASS_CONTENTS \
{ \
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* NO_REGS */ \
+ { 0x000200fc, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* M16_STORE_REGS */ \
{ 0x000300fc, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* M16_REGS */ \
+ { 0x200300fc, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* M16_SP_REGS */ \
{ 0x01000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* T_REG */ \
{ 0x010300fc, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* M16_T_REGS */ \
{ 0x02000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* PIC_FN_ADDR_REG */ \
{ 0x00000008, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* V1_REG */ \
+ { 0x0303fffc, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* SPILL_REGS */ \
{ 0xfdffffff, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* LEA_REGS */ \
{ 0xffffffff, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* GR_REGS */ \
{ 0x00000000, 0xffffffff, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* FP_REGS */ \
valid base register must belong. A base register is one used in
an address which is the register value plus a displacement. */
-#define BASE_REG_CLASS (TARGET_MIPS16 ? M16_REGS : GR_REGS)
+#define BASE_REG_CLASS (TARGET_MIPS16 ? M16_SP_REGS : GR_REGS)
/* A macro whose definition is the name of the class to which a
valid index register must belong. An index register is one used
182,183,184,185,186,187 \
}
-/* ADJUST_REG_ALLOC_ORDER is a macro which permits reg_alloc_order
- to be rearranged based on a particular function. On the mips16, we
- want to allocate $24 (T_REG) before other registers for
- instructions for which it is possible. */
-
-#define ADJUST_REG_ALLOC_ORDER mips_order_regs_for_local_alloc ()
-
/* True if VALUE is an unsigned 6-bit number. */
#define UIMM6_OPERAND(VALUE) \
#define SMALL_INT(X) SMALL_OPERAND (INTVAL (X))
#define SMALL_INT_UNSIGNED(X) SMALL_OPERAND_UNSIGNED (INTVAL (X))
#define LUI_INT(X) LUI_OPERAND (INTVAL (X))
+#define UMIPS_12BIT_OFFSET_P(OFFSET) (IN_RANGE (OFFSET, -2048, 2047))
+#define MIPS_9BIT_OFFSET_P(OFFSET) (IN_RANGE (OFFSET, -256, 255))
/* The HI and LO registers can only be reloaded via the general
registers. Condition code registers can only be loaded to the
#define SECONDARY_OUTPUT_RELOAD_CLASS(CLASS, MODE, X) \
mips_secondary_reload_class (CLASS, MODE, X, false)
+/* When targeting the o32 FPXX ABI, all moves with a length of doubleword
+ or greater must be performed by FR-mode-aware instructions.
+ This can be achieved using MFHC1/MTHC1 when these instructions are
+ available but otherwise moves must go via memory.
+ For the o32 FP64A ABI, all odd-numbered moves with a length of
+ doubleword or greater are required to use memory. Using MTC1/MFC1
+ to access the lower-half of these registers would require a forbidden
+ single-precision access. We require all double-word moves to use
+ memory because adding even and odd floating-point registers classes
+ would have a significant impact on the backend. */
+#define SECONDARY_MEMORY_NEEDED(CLASS1, CLASS2, MODE) \
+ mips_secondary_memory_needed ((CLASS1), (CLASS2), (MODE))
+
/* Return the maximum number of consecutive registers
needed to represent mode MODE in a register of class CLASS. */
#define FP_ARG_FIRST (FP_REG_FIRST + 12)
#define FP_ARG_LAST (FP_ARG_FIRST + MAX_ARGS_IN_REGISTERS - 1)
+/* Temporary register that is used when restoring $gp after a call. $4 and $5
+ are used for returning complex double values in soft-float code, so $6 is the
+ first suitable candidate for TARGET_MIPS16. For !TARGET_MIPS16 we can use
+ $gp itself as the temporary. */
+#define POST_CALL_TMP_REG \
+ (TARGET_MIPS16 ? GP_ARG_FIRST + 2 : PIC_OFFSET_TABLE_REGNUM)
+
/* 1 if N is a possible register number for function argument passing.
- We have no FP argument registers when soft-float. When FP registers
- are 32 bits, we can't directly reference the odd numbered ones. */
+ We have no FP argument registers when soft-float. Special handling
+ is required for O32 where only even numbered registers are used for
+ O32-FPXX and O32-FP64. */
#define FUNCTION_ARG_REGNO_P(N) \
((IN_RANGE((N), GP_ARG_FIRST, GP_ARG_LAST) \
- || (IN_RANGE((N), FP_ARG_FIRST, FP_ARG_LAST))) \
+ || (IN_RANGE((N), FP_ARG_FIRST, FP_ARG_LAST) \
+ && (mips_abi != ABI_32 \
+ || TARGET_FLOAT32 \
+ || ((N) % 2 == 0)))) \
&& !fixed_regs[N])
\f
/* This structure has to cope with two different argument allocation
/* True if we're generating a form of MIPS16 code in which jump tables
are stored in the text section and encoded as 16-bit PC-relative
offsets. This is only possible when general text loads are allowed,
- since the table access itself will be an "lh" instruction. */
-/* ??? 16-bit offsets can overflow in large functions. */
+ since the table access itself will be an "lh" instruction. If the
+ PC-relative offsets grow too large, 32-bit offsets are used instead. */
#define TARGET_MIPS16_SHORT_JUMP_TABLES TARGET_MIPS16_TEXT_LOADS
#define JUMP_TABLES_IN_TEXT_SECTION TARGET_MIPS16_SHORT_JUMP_TABLES
-#define CASE_VECTOR_MODE (TARGET_MIPS16_SHORT_JUMP_TABLES ? HImode : ptr_mode)
+#define CASE_VECTOR_MODE (TARGET_MIPS16_SHORT_JUMP_TABLES ? SImode : ptr_mode)
+
+/* Only use short offsets if their range will not overflow. */
+#define CASE_VECTOR_SHORTEN_MODE(MIN, MAX, BODY) \
+ (!TARGET_MIPS16_SHORT_JUMP_TABLES ? ptr_mode \
+ : ((MIN) >= -32768 && (MAX) < 32768) ? HImode \
+ : SImode)
#define CASE_VECTOR_PC_RELATIVE TARGET_MIPS16_SHORT_JUMP_TABLES
#define FUNCTION_MODE SImode
\f
-
-/* Define if copies to/from condition code registers should be avoided.
-
- This is needed for the MIPS because reload_outcc is not complete;
- it needs to handle cases where the source is a general or another
- condition code register. */
+/* We allocate $fcc registers by hand and can't cope with moves of
+ CCmode registers to and from pseudos (or memory). */
#define AVOID_CCMODE_COPIES
/* A C expression for the cost of a branch instruction. A value of
#define BRANCH_COST(speed_p, predictable_p) mips_branch_cost
#define LOGICAL_OP_NON_SHORT_CIRCUIT 0
+/* The MIPS port has several functions that return an instruction count.
+ Multiplying the count by this value gives the number of bytes that
+ the instructions occupy. */
+#define BASE_INSN_LENGTH (TARGET_MIPS16 ? 2 : 4)
+
+/* The length of a NOP in bytes. */
+#define NOP_INSN_LENGTH (TARGET_COMPRESSION ? 2 : 4)
+
/* If defined, modifies the length assigned to instruction INSN as a
function of the context in which it is used. LENGTH is an lvalue
that contains the initially computed length of the insn and should
all calls should use assembly macros. Otherwise, all indirect
calls should use "jr" or "jalr"; we will arrange to restore $gp
afterwards if necessary. Finally, we can only generate direct
- calls for -mabicalls by temporarily switching to non-PIC mode. */
+ calls for -mabicalls by temporarily switching to non-PIC mode.
+
+ For microMIPS jal(r), we try to generate jal(r)s when a 16-bit
+ instruction is in the delay slot of jal(r). */
#define MIPS_CALL(INSN, OPERANDS, TARGET_OPNO, SIZE_OPNO) \
(TARGET_USE_GOT && !TARGET_EXPLICIT_RELOCS \
? "%*" INSN "\t%" #TARGET_OPNO "%/" \
- : (REG_P (OPERANDS[TARGET_OPNO]) \
- && mips_get_pic_call_symbol (OPERANDS, SIZE_OPNO)) \
- ? ("%*.reloc\t1f,R_MIPS_JALR,%" #SIZE_OPNO "\n" \
- "1:\t" INSN "r\t%" #TARGET_OPNO "%/") \
: REG_P (OPERANDS[TARGET_OPNO]) \
- ? "%*" INSN "r\t%" #TARGET_OPNO "%/" \
- : MIPS_ABSOLUTE_JUMP ("%*" INSN "\t%" #TARGET_OPNO "%/"))
+ ? (mips_get_pic_call_symbol (OPERANDS, SIZE_OPNO) \
+ ? ("%*.reloc\t1f,R_MIPS_JALR,%" #SIZE_OPNO "\n" \
+ "1:\t" INSN "r\t%" #TARGET_OPNO "%/") \
+ : TARGET_MICROMIPS && !TARGET_INTERLINK_COMPRESSED \
+ ? "%*" INSN "r%!\t%" #TARGET_OPNO "%/" \
+ : "%*" INSN "r\t%" #TARGET_OPNO "%/") \
+ : TARGET_MICROMIPS && !TARGET_INTERLINK_COMPRESSED \
+ ? MIPS_ABSOLUTE_JUMP ("%*" INSN "%!\t%" #TARGET_OPNO "%/") \
+ : MIPS_ABSOLUTE_JUMP ("%*" INSN "\t%" #TARGET_OPNO "%/")) \
+
+/* Similar to MIPS_CALL, but this is for MICROMIPS "j" to generate
+ "jrc" when nop is in the delay slot of "jr". */
+
+#define MICROMIPS_J(INSN, OPERANDS, OPNO) \
+ (TARGET_USE_GOT && !TARGET_EXPLICIT_RELOCS \
+ ? "%*j\t%" #OPNO "%/" \
+ : REG_P (OPERANDS[OPNO]) \
+ ? "%*jr%:\t%" #OPNO \
+ : MIPS_ABSOLUTE_JUMP ("%*" INSN "\t%" #OPNO "%/"))
+
\f
/* Control the assembler format that we output. */
{ "gp", 28 + GP_REG_FIRST }, \
{ "sp", 29 + GP_REG_FIRST }, \
{ "fp", 30 + GP_REG_FIRST }, \
- { "ra", 31 + GP_REG_FIRST }, \
- ALL_COP_ADDITIONAL_REGISTER_NAMES \
+ { "ra", 31 + GP_REG_FIRST } \
}
-/* This is meant to be redefined in the host dependent files. It is a
- set of alternative names and regnums for mips coprocessors. */
-
-#define ALL_COP_ADDITIONAL_REGISTER_NAMES
-
#define DBR_OUTPUT_SEQEND(STREAM) \
do \
{ \
#define ASM_OUTPUT_ADDR_DIFF_ELT(STREAM, BODY, VALUE, REL) \
do { \
if (TARGET_MIPS16_SHORT_JUMP_TABLES) \
- fprintf (STREAM, "\t.half\t%sL%d-%sL%d\n", \
- LOCAL_LABEL_PREFIX, VALUE, LOCAL_LABEL_PREFIX, REL); \
+ { \
+ if (GET_MODE (BODY) == HImode) \
+ fprintf (STREAM, "\t.half\t%sL%d-%sL%d\n", \
+ LOCAL_LABEL_PREFIX, VALUE, LOCAL_LABEL_PREFIX, REL); \
+ else \
+ fprintf (STREAM, "\t.word\t%sL%d-%sL%d\n", \
+ LOCAL_LABEL_PREFIX, VALUE, LOCAL_LABEL_PREFIX, REL); \
+ } \
else if (TARGET_GPWORD) \
fprintf (STREAM, "\t%s\t%sL%d\n", \
ptr_mode == DImode ? ".gpdword" : ".gpword", \
#undef ASM_OUTPUT_ASCII
#define ASM_OUTPUT_ASCII mips_output_ascii
-/* Output #ident as a in the read-only data section. */
-#undef ASM_OUTPUT_IDENT
-#define ASM_OUTPUT_IDENT(FILE, STRING) \
-{ \
- const char *p = STRING; \
- int size = strlen (p) + 1; \
- switch_to_section (readonly_data_section); \
- assemble_string (p, size); \
-}
\f
/* Default to -G 8 */
#ifndef MIPS_DEFAULT_GVALUE
? MIPS_MAX_MOVE_BYTES_STRAIGHT / MOVE_MAX \
: MIPS_CALL_RATIO / 2)
-#define MOVE_BY_PIECES_P(SIZE, ALIGN) \
- mips_move_by_pieces_p (SIZE, ALIGN)
-
/* For CLEAR_RATIO, when optimizing for size, give a better estimate
of the length of a memset call, but use the default otherwise. */
#define SET_RATIO(speed) \
((speed) ? 15 : MIPS_CALL_RATIO - 2)
-
-#define STORE_BY_PIECES_P(SIZE, ALIGN) \
- mips_store_by_pieces_p (SIZE, ALIGN)
\f
-#ifndef __mips16
/* Since the bits of the _init and _fini function is spread across
many object files, each potentially with its own GP, we must assume
we need to load our GP. We don't preserve $gp or $ra, since each
#if (defined _ABIO32 && _MIPS_SIM == _ABIO32)
#define CRT_CALL_STATIC_FUNCTION(SECTION_OP, FUNC) \
asm (SECTION_OP "\n\
+ .set push\n\
+ .set nomips16\n\
.set noreorder\n\
bal 1f\n\
nop\n\
1: .cpload $31\n\
.set reorder\n\
jal " USER_LABEL_PREFIX #FUNC "\n\
+ .set pop\n\
" TEXT_SECTION_ASM_OP);
-#endif /* Switch to #elif when we're no longer limited by K&R C. */
-#if (defined _ABIN32 && _MIPS_SIM == _ABIN32) \
- || (defined _ABI64 && _MIPS_SIM == _ABI64)
+#elif ((defined _ABIN32 && _MIPS_SIM == _ABIN32) \
+ || (defined _ABI64 && _MIPS_SIM == _ABI64))
#define CRT_CALL_STATIC_FUNCTION(SECTION_OP, FUNC) \
asm (SECTION_OP "\n\
+ .set push\n\
+ .set nomips16\n\
.set noreorder\n\
bal 1f\n\
nop\n\
1: .set reorder\n\
.cpsetup $31, $2, 1b\n\
jal " USER_LABEL_PREFIX #FUNC "\n\
+ .set pop\n\
" TEXT_SECTION_ASM_OP);
#endif
-#endif
#ifndef HAVE_AS_TLS
#define HAVE_AS_TLS 0
#endif
+#ifndef HAVE_AS_NAN
+#define HAVE_AS_NAN 0
+#endif
+
#ifndef USED_FOR_TARGET
/* Information about ".set noFOO; ...; .set FOO" blocks. */
struct mips_asm_switch {
extern enum processor mips_arch; /* which cpu to codegen for */
extern enum processor mips_tune; /* which cpu to schedule for */
extern int mips_isa; /* architectural level */
+extern int mips_isa_rev;
extern const struct mips_cpu_info *mips_arch_info;
extern const struct mips_cpu_info *mips_tune_info;
-extern bool mips_base_mips16;
+extern unsigned int mips_base_compression_flags;
extern GTY(()) struct target_globals *mips16_globals;
#endif
with arguments ARGS. */
#define PMODE_INSN(NAME, ARGS) \
(Pmode == SImode ? NAME ## _si ARGS : NAME ## _di ARGS)
+
+/* If we are *not* using multilibs and the default ABI is not ABI_32 we
+ need to change these from /lib and /usr/lib. */
+#if MIPS_ABI_DEFAULT == ABI_N32
+#define STANDARD_STARTFILE_PREFIX_1 "/lib32/"
+#define STANDARD_STARTFILE_PREFIX_2 "/usr/lib32/"
+#elif MIPS_ABI_DEFAULT == ABI_64
+#define STANDARD_STARTFILE_PREFIX_1 "/lib64/"
+#define STANDARD_STARTFILE_PREFIX_2 "/usr/lib64/"
+#endif
projects / gcc.git / blobdiff