enable expensive run-time checks. With LIST,
enable only specific categories of checks.
Categories are: misc,tree,rtl,gc,gcac; default
- is misc,tree,rtl"
+ is misc,tree,gc"
ac_help="$ac_help
--disable-cpp don't provide a user-visible C preprocessor."
ac_help="$ac_help
install the user visible C preprocessor in DIR
(relative to PREFIX) as well as PREFIX/bin."
ac_help="$ac_help
- --disable-cpplib use the old isolated C preprocessor."
+ --enable-c-cpplib link cpplib directly into C and C++ compilers
+ (HIGHLY EXPERIMENTAL)."
ac_help="$ac_help
--enable-c-mbchar Enable multibyte characters for C and C++."
ac_help="$ac_help
ac_help="$ac_help
--with-dwarf2 force the default debug format to be DWARF2."
ac_help="$ac_help
- --enable-nls use Native Language Support (disabled by default)"
+ --disable-shared don't provide a shared libgcc."
+ac_help="$ac_help
+ --enable-nls use Native Language Support (default)"
ac_help="$ac_help
--disable-nls do not use Native Language Support"
ac_help="$ac_help
ac_help="$ac_help
--with-gc={simple,page} Choose the garbage collection mechanism to use
with the compiler."
+ac_help="$ac_help
+ --with-system-zlib use installed libz"
ac_help="$ac_help
--enable-new-gxx-abi
select the new abi for g++. You must select an ABI
at configuration time, so that the correct runtime
support is built. You cannot mix ABIs."
+ac_help="$ac_help
+ --enable-libstdcxx-v3
+ enable libstdc++-v3 for building and installation"
+ac_help="$ac_help
+ --enable-maintainer-mode enable make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer"
# Initialize some variables set by options.
# The variables have the same names as the options, with
# - two terminals occur directly after each other
# - the path contains an element with a dot in it
echo $ac_n "checking LIBRARY_PATH variable""... $ac_c" 1>&6
-echo "configure:606: checking LIBRARY_PATH variable" >&5
+echo "configure:617: checking LIBRARY_PATH variable" >&5
case ${LIBRARY_PATH} in
[:\;]* | *[:\;] | *[:\;][:\;]* | *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
library_path_setting="contains current directory"
# - two terminals occur directly after each other
# - the path contains an element with a dot in it
echo $ac_n "checking GCC_EXEC_PREFIX variable""... $ac_c" 1>&6
-echo "configure:631: checking GCC_EXEC_PREFIX variable" >&5
+echo "configure:642: checking GCC_EXEC_PREFIX variable" >&5
case ${GCC_EXEC_PREFIX} in
[:\;]* | *[:\;] | *[:\;][:\;]* | *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
gcc_exec_prefix_setting="contains current directory"
# Check whether --enable-checking or --disable-checking was given.
if test "${enable_checking+set}" = set; then
enableval="$enable_checking"
- case "${enableval}" in
-yes) cat >> confdefs.h <<\EOF
-#define ENABLE_CHECKING 1
-EOF
-
- cat >> confdefs.h <<\EOF
-#define ENABLE_TREE_CHECKING 1
-EOF
-
- cat >> confdefs.h <<\EOF
-#define ENABLE_RTL_CHECKING 1
-EOF
- ;;
+ ac_checking=
+ac_tree_checking=
+ac_rtl_checking=
+ac_gc_checking=
+ac_gc_always_collect=
+case "${enableval}" in
+yes) ac_checking=1 ; ac_tree_checking=1 ; ac_gc_checking=1 ;;
no) ;;
-*) IFS="${IFS= }"; ac_save_IFS="$IFS" IFS="$IFS,"
+*) IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="$IFS,"
set fnord $enableval; shift
IFS="$ac_save_IFS"
for check
do
case $check in
- misc) cat >> confdefs.h <<\EOF
+ misc) ac_checking=1 ;;
+ tree) ac_tree_checking=1 ;;
+ rtl) ac_rtl_checking=1 ;;
+ gc) ac_gc_checking=1 ;;
+ gcac) ac_gc_always_collect=1 ;;
+ *) { echo "configure: error: unknown check category $check" 1>&2; exit 1; } ;;
+ esac
+ done
+ ;;
+esac
+
+else
+ # Enable some checks by default for development versions of GCC
+ac_checking=1; ac_tree_checking=1; ac_gc_checking=1;
+fi
+
+if test x$ac_checking != x ; then
+ cat >> confdefs.h <<\EOF
#define ENABLE_CHECKING 1
EOF
- ;;
- tree) cat >> confdefs.h <<\EOF
+
+fi
+if test x$ac_tree_checking != x ; then
+ cat >> confdefs.h <<\EOF
#define ENABLE_TREE_CHECKING 1
EOF
- ;;
- rtl) cat >> confdefs.h <<\EOF
+
+fi
+if test x$ac_rtl_checking != x ; then
+ cat >> confdefs.h <<\EOF
#define ENABLE_RTL_CHECKING 1
EOF
- ;;
- gc) cat >> confdefs.h <<\EOF
+
+fi
+if test x$ac_gc_checking != x ; then
+ cat >> confdefs.h <<\EOF
#define ENABLE_GC_CHECKING 1
EOF
- ;;
- gcac) cat >> confdefs.h <<\EOF
+
+fi
+if test x$ac_gc_always_collect != x ; then
+ cat >> confdefs.h <<\EOF
#define ENABLE_GC_ALWAYS_COLLECT 1
EOF
- ;;
- *) { echo "configure: error: unknown check category $check" 1>&2; exit 1; } ;;
- esac
- done
- ;;
-esac
+
fi
fi
-# Use cpplib+cppmain for the preprocessor, but don't link it with the compiler.
-cpp_main=cppmain
-# Check whether --enable-cpplib or --disable-cpplib was given.
-if test "${enable_cpplib+set}" = set; then
- enableval="$enable_cpplib"
- if test x$enable_cpplib = xno; then
- cpp_main=cccp
+# Link cpplib into the compiler proper, for C/C++/ObjC.
+# Check whether --enable-c-cpplib or --disable-c-cpplib was given.
+if test "${enable_c_cpplib+set}" = set; then
+ enableval="$enable_c_cpplib"
+ if test x$enable_c_cpplib != xno; then
+ extra_c_objs="${extra_c_objs} libcpp.a"
+ extra_cxx_objs="${extra_cxx_objs} ../libcpp.a"
+ cat >> confdefs.h <<\EOF
+#define USE_CPPLIB 1
+EOF
+
fi
fi
-
# Enable Multibyte Characters for C/C++
# Check whether --enable-c-mbchar or --disable-c-mbchar was given.
if test "${enable_c_mbchar+set}" = set; then
enableval="$enable_c_mbchar"
if test x$enable_c_mbchar != xno; then
- extra_c_flags="${extra_c_flags} -DMULTIBYTE_CHARS=1"
+ cat >> confdefs.h <<\EOF
+#define MULTIBYTE_CHARS 1
+EOF
+
fi
fi
# Check whether --enable-threads or --disable-threads was given.
if test "${enable_threads+set}" = set; then
enableval="$enable_threads"
- if test x$enable_threads = xno; then
- enable_threads=''
-fi
+ :
else
enable_threads=''
fi
target_thread_file=''
;;
xdecosf1 | xirix | xmach | xos2 | xposix | xpthreads | xsingle | \
- xsolaris | xwin32 | xdce | xvxworks)
+ xsolaris | xwin32 | xdce | xvxworks | xaix)
target_thread_file=$enable_threads_flag
;;
*)
fi
+# Check whether --enable-shared or --disable-shared was given.
+if test "${enable_shared+set}" = set; then
+ enableval="$enable_shared"
+ :
+else
+ enable_shared=yes
+fi
+
+
+
# Determine the host, build, and target systems
ac_aux_dir=
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:969: checking host system type" >&5
+echo "configure:1008: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:990: checking target system type" >&5
+echo "configure:1029: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1008: checking build system type" >&5
+echo "configure:1047: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1035: checking for $ac_word" >&5
+echo "configure:1074: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1065: checking for $ac_word" >&5
+echo "configure:1104: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1116: checking for $ac_word" >&5
+echo "configure:1155: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1148: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1187: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1159 "configure"
+#line 1198 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1164: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1203: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1190: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1229: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1195: checking whether we are using GNU C" >&5
+echo "configure:1234: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1204: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1243: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1223: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1262: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
fi
+if test "x$CC" != xcc; then
+ echo $ac_n "checking whether $CC and cc understand -c and -o together""... $ac_c" 1>&6
+echo "configure:1295: checking whether $CC and cc understand -c and -o together" >&5
+else
+ echo $ac_n "checking whether cc understands -c and -o together""... $ac_c" 1>&6
+echo "configure:1298: checking whether cc understands -c and -o together" >&5
+fi
+set dummy $CC; ac_cc="`echo $2 |
+ sed -e 's/[^a-zA-Z0-9_]/_/g' -e 's/^[0-9]/_/'`"
+if eval "test \"`echo '$''{'ac_cv_prog_cc_${ac_cc}_c_o'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ echo 'foo(){}' > conftest.c
+# Make sure it works both with $CC and with simple cc.
+# We do the test twice because some compilers refuse to overwrite an
+# existing .o file with -o, though they will create one.
+ac_try='${CC-cc} -c conftest.c -o conftest.o 1>&5'
+if { (eval echo configure:1310: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
+ test -f conftest.o && { (eval echo configure:1311: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
+then
+ eval ac_cv_prog_cc_${ac_cc}_c_o=yes
+ if test "x$CC" != xcc; then
+ # Test first that cc exists at all.
+ if { ac_try='cc -c conftest.c 1>&5'; { (eval echo configure:1316: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
+ ac_try='cc -c conftest.c -o conftest.o 1>&5'
+ if { (eval echo configure:1318: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
+ test -f conftest.o && { (eval echo configure:1319: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
+ then
+ # cc works too.
+ :
+ else
+ # cc exists but doesn't like -o.
+ eval ac_cv_prog_cc_${ac_cc}_c_o=no
+ fi
+ fi
+ fi
+else
+ eval ac_cv_prog_cc_${ac_cc}_c_o=no
+fi
+rm -f conftest*
+
+fi
+if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+ cat >> confdefs.h <<\EOF
+#define NO_MINUS_C_MINUS_O 1
+EOF
+
+fi
+
+if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = no"; then
+ NO_MINUS_C_MINUS_O=yes
+fi
+
+
echo $ac_n "checking for long double""... $ac_c" 1>&6
-echo "configure:1255: checking for long double" >&5
+echo "configure:1351: checking for long double" >&5
if eval "test \"`echo '$''{'gcc_cv_c_long_double'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gcc_cv_c_long_double=yes
else
cat > conftest.$ac_ext <<EOF
-#line 1263 "configure"
+#line 1359 "configure"
#include "confdefs.h"
int main() {
switch (0) case 0: case (sizeof(long double) >= sizeof(double)):;
; return 0; }
EOF
-if { (eval echo configure:1273: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1369: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_c_long_double=yes
else
fi
+echo $ac_n "checking whether ${CC-cc} accepts -Wno-long-long""... $ac_c" 1>&6
+echo "configure:1392: checking whether ${CC-cc} accepts -Wno-long-long" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_no_long_long'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ save_CFLAGS="$CFLAGS"
+CFLAGS="-Wno-long-long"
+cat > conftest.$ac_ext <<EOF
+#line 1399 "configure"
+#include "confdefs.h"
+
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:1406: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_prog_cc_no_long_long=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_prog_cc_no_long_long=no
+fi
+rm -f conftest*
+CFLAGS="$save_CFLAGS"
+fi
+
+echo "$ac_t""$ac_cv_prog_cc_no_long_long" 1>&6
+
# If the native compiler is GCC, we can enable warnings even in stage1.
# That's useful for people building cross-compilers, or just running a
# quick `make'.
+stage1_warn_cflags=" -W -Wall -Wtraditional -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes"
+stage2_warn_cflags="$stage1_warn_cflags -pedantic -Wno-long-long"
if test "x$GCC" = "xyes"; then
- stage1_warn_cflags='$(WARN_CFLAGS)'
+ if test $ac_cv_prog_cc_no_long_long = yes; then
+ stage1_warn_cflags="$stage1_warn_cflags -pedantic -Wno-long-long"
+ fi
else
stage1_warn_cflags=""
fi
+# Stage specific cflags for build.
+case $build in
+vax-*-*)
+ if test x$GCC = xyes
+ then
+ stage1_warn_cflags="$stage1_warn_cflags -Wa,-J"
+ else
+ stage1_warn_cflags="$stage1_warn_cflags -J"
+ fi
+ ;;
+esac
+
+
+
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:1306: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:1450: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
echo $ac_n "checking whether a default assembler was specified""... $ac_c" 1>&6
-echo "configure:1334: checking whether a default assembler was specified" >&5
+echo "configure:1478: checking whether a default assembler was specified" >&5
if test x"${DEFAULT_ASSEMBLER+set}" = x"set"; then
if test x"$gas_flag" = x"no"; then
echo "$ac_t""yes ($DEFAULT_ASSEMBLER)" 1>&6
fi
echo $ac_n "checking whether a default linker was specified""... $ac_c" 1>&6
-echo "configure:1346: checking whether a default linker was specified" >&5
+echo "configure:1490: checking whether a default linker was specified" >&5
if test x"${DEFAULT_LINKER+set}" = x"set"; then
if test x"$gnu_ld_flag" = x"no"; then
echo "$ac_t""yes ($DEFAULT_LINKER)" 1>&6
echo "$ac_t""no" 1>&6
fi
+echo $ac_n "checking for GNU C library""... $ac_c" 1>&6
+echo "configure:1502: checking for GNU C library" >&5
+if eval "test \"`echo '$''{'gcc_cv_glibc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1507 "configure"
+#include "confdefs.h"
+#include <features.h>
+int main() {
+
+#if ! (defined __GLIBC__ || defined __GNU_LIBRARY__)
+#error Not a GNU C library system
+#endif
+; return 0; }
+EOF
+if { (eval echo configure:1517: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ gcc_cv_glibc=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ gcc_cv_glibc=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$gcc_cv_glibc" 1>&6
+if test $gcc_cv_glibc = yes; then
+ cat >> confdefs.h <<\EOF
+#define _GNU_SOURCE 1
+EOF
+
+fi
+
+echo $ac_n "checking for inline""... $ac_c" 1>&6
+echo "configure:1538: checking for inline" >&5
+if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_cv_c_inline=no
+for ac_kw in inline __inline__ __inline; do
+ cat > conftest.$ac_ext <<EOF
+#line 1545 "configure"
+#include "confdefs.h"
+
+int main() {
+} $ac_kw foo() {
+; return 0; }
+EOF
+if { (eval echo configure:1552: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_c_inline=$ac_kw; break
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+done
+
+fi
+
+echo "$ac_t""$ac_cv_c_inline" 1>&6
+case "$ac_cv_c_inline" in
+ inline | yes) ;;
+ no) cat >> confdefs.h <<\EOF
+#define inline
+EOF
+ ;;
+ *) cat >> confdefs.h <<EOF
+#define inline $ac_cv_c_inline
+EOF
+ ;;
+esac
+
+
# Find some useful tools
for ac_prog in mawk gawk nawk awk
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1363: checking for $ac_word" >&5
+echo "configure:1584: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1395: checking for $ac_word" >&5
+echo "configure:1616: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*) ac_lib=l ;;
esac
echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:1429: checking for yywrap in -l$ac_lib" >&5
+echo "configure:1650: checking for yywrap in -l$ac_lib" >&5
ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$ac_lib $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1437 "configure"
+#line 1658 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
yywrap()
; return 0; }
EOF
-if { (eval echo configure:1448: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1669: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking whether ln works""... $ac_c" 1>&6
-echo "configure:1471: checking whether ln works" >&5
+echo "configure:1692: checking whether ln works" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_LN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1503: checking whether ln -s works" >&5
+echo "configure:1724: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking for volatile""... $ac_c" 1>&6
-echo "configure:1535: checking for volatile" >&5
+echo "configure:1756: checking for volatile" >&5
if eval "test \"`echo '$''{'gcc_cv_c_volatile'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1540 "configure"
+#line 1761 "configure"
#include "confdefs.h"
int main() {
volatile int foo;
; return 0; }
EOF
-if { (eval echo configure:1547: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1768: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_c_volatile=yes
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1570: checking for $ac_word" >&5
+echo "configure:1791: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1602: checking for $ac_word" >&5
+echo "configure:1823: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1643: checking for a BSD compatible install" >&5
+echo "configure:1864: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1694: checking how to run the C preprocessor" >&5
+echo "configure:1915: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1709 "configure"
+#line 1930 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1715: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1936: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1726 "configure"
+#line 1947 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1732: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1953: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 1743 "configure"
+#line 1964 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1749: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1970: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
echo "$ac_t""$CPP" 1>&6
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:1774: checking for ANSI C header files" >&5
+echo "configure:1995: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1779 "configure"
+#line 2000 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1787: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2008: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1804 "configure"
+#line 2025 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1822 "configure"
+#line 2043 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 1843 "configure"
+#line 2064 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:1854: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2075: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:1878: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:2099: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1883 "configure"
+#line 2104 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
struct tm *tp;
; return 0; }
EOF
-if { (eval echo configure:1892: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2113: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time=yes
else
fi
echo $ac_n "checking whether string.h and strings.h may both be included""... $ac_c" 1>&6
-echo "configure:1913: checking whether string.h and strings.h may both be included" >&5
+echo "configure:2134: checking whether string.h and strings.h may both be included" >&5
if eval "test \"`echo '$''{'gcc_cv_header_string'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1918 "configure"
+#line 2139 "configure"
#include "confdefs.h"
#include <string.h>
#include <strings.h>
; return 0; }
EOF
-if { (eval echo configure:1926: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2147: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_header_string=yes
else
fi
echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:1947: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo "configure:2168: checking for sys/wait.h that is POSIX.1 compatible" >&5
if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1952 "configure"
+#line 2173 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/wait.h>
s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
; return 0; }
EOF
-if { (eval echo configure:1968: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2189: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_sys_wait_h=yes
else
for ac_hdr in limits.h stddef.h string.h strings.h stdlib.h time.h \
fcntl.h unistd.h stab.h sys/file.h sys/time.h \
sys/resource.h sys/param.h sys/times.h sys/stat.h \
- direct.h malloc.h
+ direct.h malloc.h langinfo.h iconv.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1995: checking for $ac_hdr" >&5
+echo "configure:2216: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2000 "configure"
+#line 2221 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2005: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2226: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
# Check for thread headers.
ac_safe=`echo "thread.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for thread.h""... $ac_c" 1>&6
-echo "configure:2035: checking for thread.h" >&5
+echo "configure:2256: checking for thread.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2040 "configure"
+#line 2261 "configure"
#include "confdefs.h"
#include <thread.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2045: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2266: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
ac_safe=`echo "pthread.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for pthread.h""... $ac_c" 1>&6
-echo "configure:2069: checking for pthread.h" >&5
+echo "configure:2290: checking for pthread.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2074 "configure"
+#line 2295 "configure"
#include "confdefs.h"
#include <pthread.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2079: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2300: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
# Extract the first word of "gnatbind", so it can be a program name with args.
set dummy gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2106: checking for $ac_word" >&5
+echo "configure:2327: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gnat'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
+# Do we have a single-tree copy of texinfo?
+if test -f $srcdir/../texinfo/Makefile.in; then
+ MAKEINFO='$(objdir)/../texinfo/makeinfo/makeinfo'
+ gcc_cv_prog_makeinfo_modern=yes
+ echo "$ac_t""Using makeinfo from the unified source tree." 1>&6
+else
+ # See if makeinfo has been installed and is modern enough
+ # that we can use it.
+ # Extract the first word of "makeinfo", so it can be a program name with args.
+set dummy makeinfo; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2366: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$MAKEINFO"; then
+ ac_cv_prog_MAKEINFO="$MAKEINFO" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_MAKEINFO="makeinfo"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+MAKEINFO="$ac_cv_prog_MAKEINFO"
+if test -n "$MAKEINFO"; then
+ echo "$ac_t""$MAKEINFO" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test -n "$MAKEINFO"; then
+ # Found it, now check the version.
+ echo $ac_n "checking for modern makeinfo""... $ac_c" 1>&6
+echo "configure:2395: checking for modern makeinfo" >&5
+if eval "test \"`echo '$''{'gcc_cv_prog_makeinfo_modern'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_prog_version=`$MAKEINFO --version 2>&1 |
+ sed -n 's/^.*GNU texinfo.* \([0-9][0-9.]*\).*$/\1/p'`
+ echo "configure:2401: version of makeinfo is $ac_prog_version" >&5
+ case $ac_prog_version in
+ '') gcc_cv_prog_makeinfo_modern=no;;
+ 3.1[2-9] | 3.[2-9][0-9] | 4.* | 1.6[89] | 1.7[0-9])
+ gcc_cv_prog_makeinfo_modern=yes;;
+ *) gcc_cv_prog_makeinfo_modern=no;;
+ esac
+
+fi
+
+echo "$ac_t""$gcc_cv_prog_makeinfo_modern" 1>&6
+else
+ gcc_cv_prog_makeinfo_modern=no
+fi
+
+fi
+
+if test $gcc_cv_prog_makeinfo_modern = no; then
+ echo "configure: warning:
+*** Makeinfo is missing or too old.
+*** Info documentation will not be built or installed." 1>&2
+ BUILD_INFO=
+ INSTALL_INFO=
+else
+ BUILD_INFO=info
+ INSTALL_INFO=install-info
+fi
+
# See if the stage1 system preprocessor understands the ANSI C
# preprocessor stringification operator.
echo $ac_n "checking for preprocessor stringizing operator""... $ac_c" 1>&6
-echo "configure:2139: checking for preprocessor stringizing operator" >&5
+echo "configure:2434: checking for preprocessor stringizing operator" >&5
if eval "test \"`echo '$''{'ac_cv_c_stringize'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2144 "configure"
+#line 2439 "configure"
#include "confdefs.h"
#define x(y) #y
# Use <inttypes.h> only if it exists,
# doesn't clash with <sys/types.h>, and declares intmax_t.
echo $ac_n "checking for inttypes.h""... $ac_c" 1>&6
-echo "configure:2177: checking for inttypes.h" >&5
+echo "configure:2472: checking for inttypes.h" >&5
if eval "test \"`echo '$''{'gcc_cv_header_inttypes_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2182 "configure"
+#line 2477 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <inttypes.h>
intmax_t i = -1;
; return 0; }
EOF
-if { (eval echo configure:2190: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2485: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_header_inttypes_h=yes
else
fi
+#
+# Determine if enumerated bitfields are unsigned. ISO C says they can
+# be either signed or unsigned.
+#
+echo $ac_n "checking for unsigned enumerated bitfields""... $ac_c" 1>&6
+echo "configure:2510: checking for unsigned enumerated bitfields" >&5
+if eval "test \"`echo '$''{'gcc_cv_enum_bf_unsigned'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ gcc_cv_enum_bf_unsigned=yes
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2518 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+enum t { BLAH = 128 } ;
+struct s_t { enum t member : 8; } s ;
+int main(void)
+{
+ s.member = BLAH;
+ if (s.member < 0) exit(1);
+ exit(0);
+
+}
+EOF
+if { (eval echo configure:2531: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ gcc_cv_enum_bf_unsigned=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ gcc_cv_enum_bf_unsigned=no
+fi
+rm -fr conftest*
+fi
+
+fi
+
+echo "$ac_t""$gcc_cv_enum_bf_unsigned" 1>&6
+if test $gcc_cv_enum_bf_unsigned = yes; then
+ cat >> confdefs.h <<\EOF
+#define ENUM_BITFIELDS_ARE_UNSIGNED 1
+EOF
+
+fi
+
for ac_func in strtoul bsearch putenv popen bcopy bzero bcmp \
index rindex strchr strrchr kill getrlimit setrlimit atoll atoq \
sysconf isascii gettimeofday strsignal putc_unlocked fputc_unlocked \
- fputs_unlocked getrusage valloc
+ fputs_unlocked getrusage valloc iconv nl_langinfo
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2216: checking for $ac_func" >&5
+echo "configure:2559: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2221 "configure"
+#line 2564 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2244: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2587: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
-# Make sure wchar_t is available
-#AC_CHECK_TYPE(wchar_t, unsigned int)
-
-echo $ac_n "checking for vprintf""... $ac_c" 1>&6
-echo "configure:2273: checking for vprintf" >&5
-if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then
+echo $ac_n "checking for ssize_t""... $ac_c" 1>&6
+echo "configure:2613: checking for ssize_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_ssize_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2278 "configure"
+#line 2618 "configure"
#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char vprintf(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char vprintf();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
+#include <sys/types.h>
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "(^|[^a-zA-Z_0-9])ssize_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
+ rm -rf conftest*
+ ac_cv_type_ssize_t=yes
+else
+ rm -rf conftest*
+ ac_cv_type_ssize_t=no
+fi
+rm -f conftest*
+
+fi
+echo "$ac_t""$ac_cv_type_ssize_t" 1>&6
+if test $ac_cv_type_ssize_t = no; then
+ cat >> confdefs.h <<\EOF
+#define ssize_t int
+EOF
+
+fi
+
+
+# Try to determine the array type of the second argument of getgroups
+# for the target system (int or gid_t).
+echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
+echo "configure:2649: checking for uid_t in sys/types.h" >&5
+if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2654 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "uid_t" >/dev/null 2>&1; then
+ rm -rf conftest*
+ ac_cv_type_uid_t=yes
+else
+ rm -rf conftest*
+ ac_cv_type_uid_t=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_type_uid_t" 1>&6
+if test $ac_cv_type_uid_t = no; then
+ cat >> confdefs.h <<\EOF
+#define uid_t int
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define gid_t int
+EOF
+
+fi
+
+echo $ac_n "checking type of array argument to getgroups""... $ac_c" 1>&6
+echo "configure:2683: checking type of array argument to getgroups" >&5
+if eval "test \"`echo '$''{'ac_cv_type_getgroups'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_type_getgroups=cross
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2691 "configure"
+#include "confdefs.h"
+
+/* Thanks to Mike Rendell for this test. */
+#include <sys/types.h>
+#define NGID 256
+#undef MAX
+#define MAX(x, y) ((x) > (y) ? (x) : (y))
+main()
+{
+ gid_t gidset[NGID];
+ int i, n;
+ union { gid_t gval; long lval; } val;
+
+ val.lval = -1;
+ for (i = 0; i < NGID; i++)
+ gidset[i] = val.gval;
+ n = getgroups (sizeof (gidset) / MAX (sizeof (int), sizeof (gid_t)) - 1,
+ gidset);
+ /* Exit non-zero if getgroups seems to require an array of ints. This
+ happens when gid_t is short but getgroups modifies an array of ints. */
+ exit ((n > 0 && gidset[n] != val.gval) ? 1 : 0);
+}
+
+EOF
+if { (eval echo configure:2716: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ ac_cv_type_getgroups=gid_t
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_type_getgroups=int
+fi
+rm -fr conftest*
+fi
+
+if test $ac_cv_type_getgroups = cross; then
+ cat > conftest.$ac_ext <<EOF
+#line 2730 "configure"
+#include "confdefs.h"
+#include <unistd.h>
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "getgroups.*int.*gid_t" >/dev/null 2>&1; then
+ rm -rf conftest*
+ ac_cv_type_getgroups=gid_t
+else
+ rm -rf conftest*
+ ac_cv_type_getgroups=int
+fi
+rm -f conftest*
+
+fi
+fi
+
+echo "$ac_t""$ac_cv_type_getgroups" 1>&6
+cat >> confdefs.h <<EOF
+#define GETGROUPS_T $ac_cv_type_getgroups
+EOF
+
+
+if test "${target}" = "${build}"; then
+ TARGET_GETGROUPS_T=$ac_cv_type_getgroups
+else
+ case "${target}" in
+ # This condition may need some tweaking. It should include all
+ # targets where the array type of the second argument of getgroups
+ # is int and the type of gid_t is not equivalent to int.
+ *-*-sunos* | *-*-ultrix*)
+ TARGET_GETGROUPS_T=int
+ ;;
+ *)
+ TARGET_GETGROUPS_T=gid_t
+ ;;
+ esac
+fi
+
+
+echo $ac_n "checking for vprintf""... $ac_c" 1>&6
+echo "configure:2771: checking for vprintf" >&5
+if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2776 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char vprintf(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char vprintf();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_vprintf) || defined (__stub___vprintf)
choke me
; return 0; }
EOF
-if { (eval echo configure:2301: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2799: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_vprintf=yes"
else
if test "$ac_cv_func_vprintf" != yes; then
echo $ac_n "checking for _doprnt""... $ac_c" 1>&6
-echo "configure:2325: checking for _doprnt" >&5
+echo "configure:2823: checking for _doprnt" >&5
if eval "test \"`echo '$''{'ac_cv_func__doprnt'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2330 "configure"
+#line 2828 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char _doprnt(); below. */
; return 0; }
EOF
-if { (eval echo configure:2353: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2851: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func__doprnt=yes"
else
echo $ac_n "checking whether the printf functions support %p""... $ac_c" 1>&6
-echo "configure:2389: checking whether the printf functions support %p" >&5
+echo "configure:2887: checking whether the printf functions support %p" >&5
if eval "test \"`echo '$''{'gcc_cv_func_printf_ptr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gcc_cv_func_printf_ptr=no
else
cat > conftest.$ac_ext <<EOF
-#line 2397 "configure"
+#line 2895 "configure"
#include "confdefs.h"
#include <stdio.h>
-main()
+int main()
{
char buf[64];
char *p = buf, *q = NULL;
sprintf(buf, "%p", p);
sscanf(buf, "%p", &q);
- exit (p != q);
+ return (p != q);
}
EOF
-if { (eval echo configure:2410: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2908: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
gcc_cv_func_printf_ptr=yes
else
;;
esac
echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:2443: checking for pid_t" >&5
+echo "configure:2941: checking for pid_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2448 "configure"
+#line 2946 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
ac_safe=`echo "vfork.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for vfork.h""... $ac_c" 1>&6
-echo "configure:2477: checking for vfork.h" >&5
+echo "configure:2975: checking for vfork.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2482 "configure"
+#line 2980 "configure"
#include "confdefs.h"
#include <vfork.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2487: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2985: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
echo $ac_n "checking for working vfork""... $ac_c" 1>&6
-echo "configure:2512: checking for working vfork" >&5
+echo "configure:3010: checking for working vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
echo $ac_n "checking for vfork""... $ac_c" 1>&6
-echo "configure:2518: checking for vfork" >&5
+echo "configure:3016: checking for vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2523 "configure"
+#line 3021 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vfork(); below. */
; return 0; }
EOF
-if { (eval echo configure:2546: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3044: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_vfork=yes"
else
ac_cv_func_vfork_works=$ac_cv_func_vfork
else
cat > conftest.$ac_ext <<EOF
-#line 2568 "configure"
+#line 3066 "configure"
#include "confdefs.h"
/* Thanks to Paul Eggert for this test. */
#include <stdio.h>
}
}
EOF
-if { (eval echo configure:2663: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3161: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_vfork_works=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2689: checking for $ac_hdr" >&5
+echo "configure:3187: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2694 "configure"
+#line 3192 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2699: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3197: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2728: checking for $ac_func" >&5
+echo "configure:3226: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2733 "configure"
+#line 3231 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2756: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3254: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
done
-echo $ac_n "checking for working mmap from /dev/zero""... $ac_c" 1>&6
-echo "configure:2781: checking for working mmap from /dev/zero" >&5
+echo $ac_n "checking for working mmap which provides zeroed pages anywhere""... $ac_c" 1>&6
+echo "configure:3279: checking for working mmap which provides zeroed pages anywhere" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_anywhere'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_mmap_anywhere=no
else
cat > conftest.$ac_ext <<EOF
-#line 2789 "configure"
+#line 3287 "configure"
#include "confdefs.h"
/* Test by Richard Henderson and Alexandre Oliva.
- Check whether mmap from /dev/zero works. */
+ Check whether mmap MAP_ANONYMOUS or mmap from /dev/zero works. */
#include <sys/types.h>
#include <fcntl.h>
#include <sys/mman.h>
+#if !defined (MAP_ANONYMOUS) && defined (MAP_ANON)
+# define MAP_ANONYMOUS MAP_ANON
+#endif
+
/* This mess was copied from the GNU getpagesize.h. */
#ifndef HAVE_GETPAGESIZE
# ifdef HAVE_UNISTD_H
char *x;
int fd, pg;
+#ifndef MAP_ANONYMOUS
fd = open("/dev/zero", O_RDWR);
if (fd < 0)
exit(1);
+#endif
pg = getpagesize();
+#ifdef MAP_ANONYMOUS
+ x = (char*)mmap(0, pg, PROT_READ|PROT_WRITE,
+ MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+#else
x = (char*)mmap(0, pg, PROT_READ|PROT_WRITE, MAP_PRIVATE, fd, 0);
+#endif
if (x == (char *) -1)
exit(2);
exit(0);
}
EOF
-if { (eval echo configure:2861: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3370: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_anywhere=yes
else
fi
-
-for ac_func in bcopy bzero bcmp \
- index rindex getenv atol sbrk abort atof getcwd getwd \
- strsignal putc_unlocked fputs_unlocked strstr environ
-do
-echo $ac_n "checking whether $ac_func must be declared""... $ac_c" 1>&6
-echo "configure:2889: checking whether $ac_func must be declared" >&5
-if eval "test \"`echo '$''{'gcc_cv_decl_needed_$ac_func'+set}'`\" = set"; then
+echo $ac_n "checking for working mmap of a file""... $ac_c" 1>&6
+echo "configure:3393: checking for working mmap of a file" >&5
+if eval "test \"`echo '$''{'ac_cv_func_mmap_file'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # Create a file one thousand bytes long.
+for i in 1 2 3 4 5 6 7 8 9 0
+do for j in 1 2 3 4 5 6 7 8 9 0
+do echo $i $j xxxxx
+done
+done > conftestdata$$
+
+if test "$cross_compiling" = yes; then
+ ac_cv_func_mmap_file=no
else
cat > conftest.$ac_ext <<EOF
-#line 2894 "configure"
+#line 3408 "configure"
#include "confdefs.h"
-#include <stdio.h>
-#ifdef STRING_WITH_STRINGS
-# include <string.h>
-# include <strings.h>
-#else
-# ifdef HAVE_STRING_H
-# include <string.h>
-# else
-# ifdef HAVE_STRINGS_H
-# include <strings.h>
-# endif
-# endif
-#endif
-#ifdef HAVE_STDLIB_H
-#include <stdlib.h>
-#endif
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-#ifndef HAVE_RINDEX
-#ifndef rindex
-#define rindex strrchr
-#endif
-#endif
-#ifndef HAVE_INDEX
-#ifndef index
-#define index strchr
-#endif
-#endif
+/* Test by Zack Weinberg. Modified from MMAP_ANYWHERE test by
+ Richard Henderson and Alexandre Oliva.
+ Check whether read-only mmap of a plain file works. */
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <sys/mman.h>
-int main() {
-char *(*pfn) = (char *(*)) $ac_func
-; return 0; }
+int main()
+{
+ char *x;
+ int fd;
+ struct stat st;
+
+ fd = open("conftestdata$$", O_RDONLY);
+ if (fd < 0)
+ exit(1);
+
+ if (fstat (fd, &st))
+ exit(2);
+
+ x = (char*)mmap(0, st.st_size, PROT_READ, MAP_PRIVATE, fd, 0);
+ if (x == (char *) -1)
+ exit(3);
+
+ if (x[0] != '1' || x[1] != ' ' || x[2] != '1' || x[3] != ' ')
+ exit(4);
+
+ if (munmap(x, st.st_size) < 0)
+ exit(5);
+
+ exit(0);
+}
EOF
-if { (eval echo configure:2931: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- eval "gcc_cv_decl_needed_$ac_func=no"
+if { (eval echo configure:3445: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ ac_cv_func_mmap_file=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "gcc_cv_decl_needed_$ac_func=yes"
+ rm -fr conftest*
+ ac_cv_func_mmap_file=no
fi
-rm -f conftest*
+rm -fr conftest*
fi
-if eval "test \"`echo '$gcc_cv_decl_needed_'$ac_func`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- gcc_tr_decl=NEED_DECLARATION_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- cat >> confdefs.h <<EOF
-#define $gcc_tr_decl 1
+fi
+
+echo "$ac_t""$ac_cv_func_mmap_file" 1>&6
+if test $ac_cv_func_mmap_file = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_MMAP_FILE 1
EOF
-else
- echo "$ac_t""no" 1>&6
fi
-done
-
-for ac_func in malloc realloc calloc free
+# We will need to find libiberty.h and ansidecl.h
+saved_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS -I${srcdir} -I${srcdir}/../include"
+for ac_func in bcopy bzero bcmp \
+ index rindex getenv atol sbrk abort atof getcwd getwd \
+ strsignal putc_unlocked fputs_unlocked strstr environ \
+ malloc realloc calloc free basename getopt
do
-echo $ac_n "checking whether $ac_func must be declared""... $ac_c" 1>&6
-echo "configure:2960: checking whether $ac_func must be declared" >&5
-if eval "test \"`echo '$''{'gcc_cv_decl_needed_$ac_func'+set}'`\" = set"; then
+ ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
+echo "configure:3478: checking whether $ac_func is declared" >&5
+if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2965 "configure"
+#line 3483 "configure"
#include "confdefs.h"
-
-#include <stdio.h>
-#ifdef STRING_WITH_STRINGS
-# include <string.h>
-# include <strings.h>
-#else
-# ifdef HAVE_STRING_H
-# include <string.h>
-# else
-# ifdef HAVE_STRINGS_H
-# include <strings.h>
-# endif
-# endif
-#endif
-#ifdef HAVE_STDLIB_H
-#include <stdlib.h>
-#endif
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-#ifndef HAVE_RINDEX
-#ifndef rindex
-#define rindex strrchr
-#endif
-#endif
-#ifndef HAVE_INDEX
-#ifndef index
-#define index strchr
-#endif
-#endif
-#ifdef HAVE_MALLOC_H
-#include <malloc.h>
-#endif
+#include "gansidecl.h"
+#include "system.h"
int main() {
-char *(*pfn) = (char *(*)) $ac_func
+#ifndef $ac_func
+char *(*pfn) = (char *(*)) $ac_func ;
+#endif
; return 0; }
EOF
-if { (eval echo configure:3005: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3494: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- eval "gcc_cv_decl_needed_$ac_func=no"
+ eval "gcc_cv_have_decl_$ac_func=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "gcc_cv_decl_needed_$ac_func=yes"
+ eval "gcc_cv_have_decl_$ac_func=no"
fi
rm -f conftest*
fi
-if eval "test \"`echo '$gcc_cv_decl_needed_'$ac_func`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- gcc_tr_decl=NEED_DECLARATION_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- cat >> confdefs.h <<EOF
-#define $gcc_tr_decl 1
+if eval "test \"`echo '$gcc_cv_have_decl_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6 ; cat >> confdefs.h <<EOF
+#define $ac_tr_decl 1
EOF
-
+
else
- echo "$ac_t""no" 1>&6
+ echo "$ac_t""no" 1>&6 ; cat >> confdefs.h <<EOF
+#define $ac_tr_decl 0
+EOF
+
fi
done
+if test x = y ; then
+ cat >> confdefs.h <<EOF
+#define HAVE_DECL_BCOPY 1
+EOF
+ cat >> confdefs.h <<EOF
+#define HAVE_DECL_BZERO 1
+EOF
+ cat >> confdefs.h <<EOF
+#define HAVE_DECL_BCMP 1
+EOF
+ \
+ cat >> confdefs.h <<EOF
+#define HAVE_DECL_INDEX 1
+EOF
+ cat >> confdefs.h <<EOF
+#define HAVE_DECL_RINDEX 1
+EOF
+ cat >> confdefs.h <<EOF
+#define HAVE_DECL_GETENV 1
+EOF
+ cat >> confdefs.h <<EOF
+#define HAVE_DECL_ATOL 1
+EOF
+ cat >> confdefs.h <<EOF
+#define HAVE_DECL_SBRK 1
+EOF
+ cat >> confdefs.h <<EOF
+#define HAVE_DECL_ABORT 1
+EOF
+ cat >> confdefs.h <<EOF
+#define HAVE_DECL_ATOF 1
+EOF
+ cat >> confdefs.h <<EOF
+#define HAVE_DECL_GETCWD 1
+EOF
+ cat >> confdefs.h <<EOF
+#define HAVE_DECL_GETWD 1
+EOF
+ \
+ cat >> confdefs.h <<EOF
+#define HAVE_DECL_STRSIGNAL 1
+EOF
+ cat >> confdefs.h <<EOF
+#define HAVE_DECL_PUTC_UNLOCKED 1
+EOF
+ cat >> confdefs.h <<EOF
+#define HAVE_DECL_FPUTS_UNLOCKED 1
+EOF
+ cat >> confdefs.h <<EOF
+#define HAVE_DECL_STRSTR 1
+EOF
+ cat >> confdefs.h <<EOF
+#define HAVE_DECL_ENVIRON 1
+EOF
+ \
+ cat >> confdefs.h <<EOF
+#define HAVE_DECL_MALLOC 1
+EOF
+ cat >> confdefs.h <<EOF
+#define HAVE_DECL_REALLOC 1
+EOF
+ cat >> confdefs.h <<EOF
+#define HAVE_DECL_CALLOC 1
+EOF
+ cat >> confdefs.h <<EOF
+#define HAVE_DECL_FREE 1
+EOF
+ cat >> confdefs.h <<EOF
+#define HAVE_DECL_BASENAME 1
+EOF
+ cat >> confdefs.h <<EOF
+#define HAVE_DECL_GETOPT 1
+EOF
+fi
for ac_func in getrlimit setrlimit getrusage
do
-echo $ac_n "checking whether $ac_func must be declared""... $ac_c" 1>&6
-echo "configure:3034: checking whether $ac_func must be declared" >&5
-if eval "test \"`echo '$''{'gcc_cv_decl_needed_$ac_func'+set}'`\" = set"; then
+ ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
+echo "configure:3599: checking whether $ac_func is declared" >&5
+if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3039 "configure"
+#line 3604 "configure"
#include "confdefs.h"
-
-#include <stdio.h>
-#ifdef STRING_WITH_STRINGS
-# include <string.h>
-# include <strings.h>
-#else
-# ifdef HAVE_STRING_H
-# include <string.h>
-# else
-# ifdef HAVE_STRINGS_H
-# include <strings.h>
-# endif
-# endif
-#endif
-#ifdef HAVE_STDLIB_H
-#include <stdlib.h>
-#endif
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-#ifndef HAVE_RINDEX
-#ifndef rindex
-#define rindex strrchr
-#endif
-#endif
-#ifndef HAVE_INDEX
-#ifndef index
-#define index strchr
-#endif
-#endif
-#include <sys/types.h>
+#include "gansidecl.h"
+#include "system.h"
#ifdef HAVE_SYS_RESOURCE_H
#include <sys/resource.h>
#endif
+
int main() {
-char *(*pfn) = (char *(*)) $ac_func
+#ifndef $ac_func
+char *(*pfn) = (char *(*)) $ac_func ;
+#endif
; return 0; }
EOF
-if { (eval echo configure:3080: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3619: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- eval "gcc_cv_decl_needed_$ac_func=no"
+ eval "gcc_cv_have_decl_$ac_func=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "gcc_cv_decl_needed_$ac_func=yes"
+ eval "gcc_cv_have_decl_$ac_func=no"
fi
rm -f conftest*
fi
-if eval "test \"`echo '$gcc_cv_decl_needed_'$ac_func`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- gcc_tr_decl=NEED_DECLARATION_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- cat >> confdefs.h <<EOF
-#define $gcc_tr_decl 1
+if eval "test \"`echo '$gcc_cv_have_decl_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6 ; cat >> confdefs.h <<EOF
+#define $ac_tr_decl 1
EOF
-
+
else
- echo "$ac_t""no" 1>&6
+ echo "$ac_t""no" 1>&6 ; cat >> confdefs.h <<EOF
+#define $ac_tr_decl 0
+EOF
+
fi
done
+if test x = y ; then
+ cat >> confdefs.h <<EOF
+#define HAVE_DECL_GETRLIMIT 1
+EOF
+ cat >> confdefs.h <<EOF
+#define HAVE_DECL_SETRLIMIT 1
+EOF
+ cat >> confdefs.h <<EOF
+#define HAVE_DECL_GETRUSAGE 1
+EOF
+fi
+
+# Restore CFLAGS from before the gcc_AC_NEED_DECLARATIONS tests.
+CFLAGS="$saved_CFLAGS"
# mkdir takes a single argument on some systems.
echo $ac_n "checking if mkdir takes one argument""... $ac_c" 1>&6
-echo "configure:3108: checking if mkdir takes one argument" >&5
+echo "configure:3662: checking if mkdir takes one argument" >&5
if eval "test \"`echo '$''{'gcc_cv_mkdir_takes_one_arg'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3113 "configure"
+#line 3667 "configure"
#include "confdefs.h"
#include <sys/types.h>
mkdir ("foo", 0);
; return 0; }
EOF
-if { (eval echo configure:3130: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3684: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_mkdir_takes_one_arg=no
else
alpha*-*-*)
cpu_type=alpha
;;
+ strongarm*-*-*)
+ cpu_type=arm
+ ;;
arm*-*-*)
cpu_type=arm
;;
;;
esac
- # Common parts for linux-gnu and openbsd systems
+ # Common parts for linux and openbsd systems
case $machine in
- *-*-linux-gnu*)
+ *-*-linux*)
xm_defines="HAVE_ATEXIT POSIX BSTRING"
;;
*-*-openbsd*)
xm_file="alpha/xm-alpha-interix.h xm-interix.h"
xmake_file="x-interix alpha/t-pe"
- tmake_file="alpha/t-interix alpha/t-ieee"
+ tmake_file="alpha/t-alpha alpha/t-interix alpha/t-ieee"
if test x$enable_threads = xyes ; then
thread_file='posix'
fi
#prefix='$$INTERIX_ROOT'/usr/contrib
#local_prefix='$$INTERIX_ROOT'/usr/contrib
;;
- alpha*-*-linux-gnuecoff*)
+ alpha*-*-linux*ecoff*)
tm_file="${tm_file} alpha/linux-ecoff.h alpha/linux.h"
target_cpu_default="MASK_GAS"
- tmake_file="alpha/t-ieee"
+ tmake_file="alpha/t-alpha alpha/t-ieee"
gas=no
xmake_file=none
gas=yes gnu_ld=yes
;;
- alpha*-*-linux-gnulibc1*)
+ alpha*-*-linux*libc1*)
tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
target_cpu_default="MASK_GAS"
- tmake_file="t-linux t-linux-gnulibc1 alpha/t-linux alpha/t-crtbe alpha/t-ieee"
+ tmake_file="t-linux t-linux-gnulibc1 alpha/t-alpha alpha/t-crtbe alpha/t-ieee"
extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
xmake_file=none
gas=yes gnu_ld=yes
thread_file='posix'
fi
;;
- alpha*-*-linux-gnu*)
+ alpha*-*-linux*)
tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
target_cpu_default="MASK_GAS"
- tmake_file="t-linux alpha/t-linux alpha/t-crtbe alpha/t-ieee"
+ tmake_file="t-linux alpha/t-crtbe alpha/t-alpha alpha/t-ieee"
extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
xmake_file=none
gas=yes gnu_ld=yes
alpha*-*-netbsd*)
tm_file="${tm_file} alpha/elf.h alpha/netbsd.h alpha/netbsd-elf.h"
target_cpu_default="MASK_GAS"
- tmake_file="alpha/t-crtbe alpha/t-ieee"
+ tmake_file="alpha/t-crtbe alpha/t-alpha alpha/t-ieee"
extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
xmake_file=none
gas=yes gnu_ld=yes
alpha*-*-openbsd*)
# default x-alpha is only appropriate for dec-osf.
target_cpu_default="MASK_GAS"
- tmake_file="alpha/t-ieee"
+ tmake_file="alpha/t-alpha alpha/t-ieee"
;;
alpha*-dec-osf*)
extra_passes="mips-tfile mips-tdump"
fi
use_collect2=yes
- tmake_file="alpha/t-ieee"
+ tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-osf"
+ xmake_file=alpha/x-osf
case $machine in
*-*-osf1*)
tm_file="${tm_file} alpha/osf.h alpha/osf12.h alpha/osf2or3.h"
;;
*-*-osf4*)
tm_file="${tm_file} alpha/osf.h"
+ tmake_file="$tmake_file alpha/t-osf4"
# Some versions of OSF4 (specifically X4.0-9 296.7) have
# a broken tar, so we use cpio instead.
install_headers_dir=install-headers-cpio
;;
*-*-osf5*)
tm_file="${tm_file} alpha/osf.h alpha/osf5.h"
+ tmake_file="$tmake_file alpha/t-osf4"
;;
esac
case $machine in
;;
alpha*-*-vxworks*)
tm_file="${tm_file} dbx.h alpha/vxworks.h"
- tmake_file="alpha/t-ieee"
+ tmake_file="alpha/t-alpha alpha/t-ieee"
if x$gas != xyes
then
extra_passes="mips-tfile mips-tdump"
alpha*-*-winnt*)
tm_file="${tm_file} alpha/alpha32.h alpha/win-nt.h winnt/win-nt.h"
xm_file="${xm_file} config/winnt/xm-winnt.h alpha/xm-winnt.h"
- tmake_file="t-libc-ok alpha/t-ieee"
+ tmake_file="t-libc-ok alpha/t-alpha alpha/t-ieee"
xmake_file=winnt/x-winnt
extra_host_objs=oldnames.o
extra_gcc_objs="spawnv.o oldnames.o"
alpha*-dec-vms*)
tm_file=alpha/vms.h
xm_file="${xm_file} alpha/xm-vms.h"
- tmake_file="alpha/t-vms alpha/t-ieee"
+ tmake_file="alpha/t-alpha alpha/t-vms alpha/t-ieee"
;;
arc-*-elf*)
extra_parts="crtinit.o crtfini.o"
;;
arm-*-coff* | armel-*-coff*)
tm_file=arm/coff.h
- tmake_file=arm/t-bare
+ tmake_file=arm/t-arm-coff
;;
arm-*-vxworks*)
tm_file=arm/vxarm.h
- tmake_file=arm/t-bare
+ tmake_file=arm/t-arm-coff
thread_file='vxworks'
;;
arm-*-riscix1.[01]*) # Acorn RISC machine (early versions)
tmake_file="t-netbsd arm/t-netbsd"
use_collect2=yes
;;
- arm*-*-linux-gnuaout*) # ARM GNU/Linux with a.out
+ arm*-*-linux*aout*) # ARM GNU/Linux with a.out
cpu_type=arm
xmake_file=x-linux
tm_file=arm/linux-aout.h
tmake_file=arm/t-linux
gnu_ld=yes
;;
- arm*-*-linux-gnuoldld*) # ARM GNU/Linux with old ELF linker
+ arm*-*-linux*oldld*) # ARM GNU/Linux with old ELF linker
xm_file=arm/xm-linux.h
xmake_file=x-linux
tm_file="arm/linux-oldld.h arm/linux-elf.h"
;;
esac
;;
- arm*-*-linux-gnu*) # ARM GNU/Linux with ELF
+ arm*-*-linux*) # ARM GNU/Linux with ELF
xm_file=arm/xm-linux.h
xmake_file=x-linux
tm_file="arm/linux-elf.h"
;;
arm*-*-aout)
tm_file=arm/aout.h
- tmake_file=arm/t-bare
+ tmake_file=arm/t-arm-aout
;;
arm*-*-ecos-elf)
tm_file=arm/ecos-elf.h
- tmake_file=arm/t-elf
+ tmake_file=arm/t-arm-elf
;;
arm*-*-elf)
tm_file=arm/unknown-elf.h
arm-*-pe*)
tm_file=arm/pe.h
tmake_file=arm/t-pe
- extra_objs=pe.o
+ extra_objs="pe.o"
;;
avr-*-*)
;;
;;
c4x-*)
cpu_type=c4x
+ float_format=c4x
tmake_file=c4x/t-c4x
;;
clipper-intergraph-clix*)
extra_parts="crtbegin.o crtend.o"
install_headers_dir=install-headers-cpio
;;
+ d30v-*)
+ float_format=i64
+ ;;
dsp16xx-*)
;;
elxsi-elxsi-*)
tmake_file=fr30/t-fr30
extra_parts="crti.o crtn.o crtbegin.o crtend.o"
;;
-# This hasn't been upgraded to GCC 2.
-# fx80-alliant-*) # Alliant FX/80
-# ;;
h8300-*-*)
float_format=i32
;;
if test x$enable_threads = x; then
enable_threads=$have_pthread_h
fi
- if test x$enable_threads = xyes; then
- thread_file='dce'
+ case x${enable_threads} in
+ xyes | xdce)
tmake_file="${tmake_file} pa/t-dce-thr"
- fi
+ ;;
+ esac
install_headers_dir=install-headers-cpio
use_collect2=yes
;;
if test x$enable_threads = x; then
enable_threads=$have_pthread_h
fi
- if test x$enable_threads = xyes; then
- thread_file='dce'
+ case x${enable_threads} in
+ xyes | xdce)
tmake_file="${tmake_file} pa/t-dce-thr"
+ ;;
+ esac
+ install_headers_dir=install-headers-cpio
+ use_collect2=yes
+ ;;
+ hppa*64*-*-hpux11*)
+ target_cpu_default="MASK_PA_11"
+ xm_file=pa/xm-pa64hpux.h
+ xmake_file=pa/x-pa-hpux
+ tmake_file=pa/t-pa
+ tm_file="pa/pa64-start.h ${tm_file} pa/pa64-regs.h pa/long_double.h pa/elf.h pa/pa-hpux.h pa/pa-hpux11.h pa/pa-64.h"
+ float_format=i128
+ tmake_file=pa/t-pa64
+ target_cpu_default="(MASK_PA_11|MASK_PA_20)"
+
+ if [ x$gas = xyes ]
+ then
+ tm_file="${tm_file} pa/pa-gas.h"
fi
+# if [[ x$enable_threads = x ]]; then
+# enable_threads=$have_pthread_h
+# fi
+# if [[ x$enable_threads = xyes ]]; then
+# thread_file='dce'
+# tmake_file="${tmake_file} pa/t-dce-thr"
+# fi
install_headers_dir=install-headers-cpio
use_collect2=yes
;;
use_collect2=yes
;;
hppa*-*-mpeix*)
- tm_file="${tm_file} pa/pa-mpeix.h"
+ tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-mpeix.h"
xm_file=pa/xm-pampeix.h
xmake_file=pa/x-pa-mpeix
echo "You must use gas. Assuming it is already installed."
tm_file=i386/i386-aout.h
tmake_file=i386/t-i386bare
;;
- i[34567]86-*-beospe*)
- xm_file=i386/xm-beos.h
- xm_defines="USE_C_ALLOCA"
- tmake_file=i386/t-beos
- tm_file=i386/beos-pe.h
- xmake_file=i386/x-beos
- extra_objs=winnt.o
- ;;
i[34567]86-*-beoself* | i[34567]86-*-beos*)
xm_file=i386/xm-beos.h
tmake_file='i386/t-beos i386/t-crtpic'
tm_file=i386/beos-elf.h
xmake_file=i386/x-beos
- extra_objs=winnt.o
extra_parts='crtbegin.o crtend.o'
;;
i[34567]86-*-bsdi* | i[34567]86-*-bsd386*)
# Next line turned off because both 386BSD and BSD/386 use GNU ld.
# use_collect2=yes
;;
- i[34567]86-*-freebsdelf*)
- tm_file="i386/i386.h i386/att.h svr4.h freebsd.h i386/freebsd-elf.h i386/perform.h"
+ i[34567]86-*-freebsd[12] | i[34567]86-*-freebsd[12].* | i[34567]86-*-freebsd*aout*)
+ tm_file="i386/freebsd-aout.h i386/perform.h"
+ tmake_file=t-freebsd
+ ;;
+ i[34567]86-*-freebsd*)
+ tm_file="i386/i386.h i386/att.h svr4.h freebsd.h i386/freebsd.h i386/perform.h"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
tmake_file=t-freebsd
gas=yes
;;
esac
;;
- i[34567]86-*-freebsd*)
- tm_file="i386/freebsd.h i386/perform.h"
- tmake_file=t-freebsd
- ;;
i[34567]86-*-netbsd*)
tm_file=i386/netbsd.h
tmake_file=t-netbsd
tmake_file=i386/t-crtstuff
extra_parts="crtbegin.o crtend.o"
fi
+ tmake_file="$tmake_file i386/t-i386bare"
install_headers_dir=install-headers-cpio
;;
- i[34567]86-*-linux-gnuoldld*) # Intel 80386's running GNU/Linux
+ i[34567]86-*-linux*oldld*) # Intel 80386's running GNU/Linux
# pre BFD linkers
xmake_file=x-linux-aout
tmake_file="t-linux-aout i386/t-crtstuff"
gnu_ld=yes
float_format=i386
;;
- i[34567]86-*-linux-gnuaout*) # Intel 80386's running GNU/Linux
+ i[34567]86-*-linux*aout*) # Intel 80386's running GNU/Linux
xmake_file=x-linux-aout
tmake_file="t-linux-aout i386/t-crtstuff"
tm_file=i386/linux-aout.h
gnu_ld=yes
float_format=i386
;;
- i[34567]86-*-linux-gnulibc1) # Intel 80386's running GNU/Linux
+ i[34567]86-*-linux*libc1) # Intel 80386's running GNU/Linux
# GNU/Linux C library 5
xmake_file=x-linux
tm_file=i386/linux.h
thread_file='single'
fi
;;
- i[34567]86-*-linux-gnu*) # Intel 80386's running GNU/Linux
+ i[34567]86-*-linux*) # Intel 80386's running GNU/Linux
# aka GNU/Linux C library 6
xmake_file=x-linux
tm_file=i386/linux.h
gnu_ld=yes
gas=yes
exeext=.exe
+ float_format=none
case $host in *pc-msdosdjgpp*)
target_alias=djgpp
;;
else
tmake_file=i386/t-sco5
fi
+ tmake_file="$tmake_file i386/t-i386bare"
extra_parts="crti.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
;;
i[34567]86-*-sco3.2v4*) # 80386 running SCO 3.2v4 system
tmake_file=i386/t-crtstuff
extra_parts="crtbegin.o crtend.o"
fi
+ tmake_file="$tmake_file i386/t-i386bare"
# The default EAFS filesystem supports long file names.
# Truncating the target makes $host != $target which
# makes gcc think it is doing a cross-compile.
extra_parts="crtbegin.o crtend.o"
tmake_file=i386/t-crtstuff
fi
+ tmake_file="$tmake_file i386/t-i386bare"
truncate_target=yes
;;
i[34567]86-*-solaris2*)
# Only needed if gas does not support -s
tm_file="i386/sol2gas.h ${tm_file}"
fi
- tmake_file=i386/t-sol2
+ tmake_file="i386/t-i386bare i386/t-sol2"
extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
xmake_file=x-svr4
if test x${enable_threads} = x; then
then
tm_file="${tm_file} dbx.h"
fi
- tmake_file=i386/t-crtpic
+ tmake_file="i386/t-i386bare i386/t-crtpic"
xmake_file=x-svr4
extra_parts="crtbegin.o crtend.o"
if test x$enable_threads = xyes; then
then
tm_file="${tm_file} dbx.h"
fi
- tmake_file=i386/t-crtpic
+ tmake_file="i386/t-i386bare i386/t-crtpic"
xmake_file=x-svr4
extra_parts="crtbegin.o crtend.o"
;;
xm_file="xm-alloca.h ${xm_file}"
xm_defines="USG POSIX"
tm_file=i386/udk.h
- tmake_file="i386/t-crtpic i386/t-udk"
+ tmake_file="i386/t-i386bare i386/t-crtpic i386/t-udk"
xmake_file=x-svr4
extra_parts="crtbegin.o crtend.o"
install_headers_dir=install-headers-cpio
extra_parts="crtbegin.o crtend.o"
tmake_file=i386/t-crtstuff
fi
+ tmake_file="$tmake_file i386/t-crtpic"
;;
i386-*-vsta) # Intel 80386's running VSTa kernel
xm_file="${xm_file} i386/xm-vsta.h"
then
target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
fi
+ float_format=i386
;;
ia64*-*-linux*)
tm_file=ia64/linux.h
- tmake_file="t-linux ia64/t-ia64"
+ tmake_file="t-linux ia64/t-ia64 ia64/t-glibc"
target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
if test x$enable_threads = xyes; then
thread_file='posix'
fi
+ float_format=i386
;;
m32r-*-elf*)
extra_parts="crtinit.o crtfini.o"
;;
+ # m68hc11 and m68hc12 share the same machine description.
+ m68hc11-*-*|m6811-*-*)
+ tm_file="m68hc11/m68hc11.h"
+ xm_file="m68hc11/xm-m68hc11.h"
+ tm_p_file="m68hc11/m68hc11-protos.h"
+ md_file="m68hc11/m68hc11.md"
+ out_file="m68hc11/m68hc11.c"
+ tmake_file="m68hc11/t-m68hc11-gas"
+ ;;
+ m68hc12-*-*|m6812-*-*)
+ tm_file="m68hc11/m68hc12.h"
+ tm_p_file="m68hc11/m68hc11-protos.h"
+ xm_file="m68hc11/xm-m68hc11.h"
+ md_file="m68hc11/m68hc11.md"
+ out_file="m68hc11/m68hc11.c"
+ tmake_file="m68hc11/t-m68hc11-gas"
+ ;;
m68000-convergent-sysv*)
tm_file=m68k/ctix.h
xm_file="m68k/xm-3b1.h ${xm_file}"
extra_headers=math-68881.h
float_format=m68k
;;
- m68k-*-linux-gnuaout*) # Motorola m68k's running GNU/Linux
+ m68k-*-linux*aout*) # Motorola m68k's running GNU/Linux
# with a.out format
xmake_file=x-linux
tm_file=m68k/linux-aout.h
float_format=m68k
gnu_ld=yes
;;
- m68k-*-linux-gnulibc1) # Motorola m68k's running GNU/Linux
+ m68k-*-linux*libc1) # Motorola m68k's running GNU/Linux
# with ELF format using the
# GNU/Linux C library 5
xmake_file=x-linux
float_format=m68k
gnu_ld=yes
;;
- m68k-*-linux-gnu*) # Motorola m68k's running GNU/Linux
+ m68k-*-linux*) # Motorola m68k's running GNU/Linux
# with ELF format using glibc 2
# aka the GNU/Linux C library 6.
xmake_file=x-linux
;;
m88k-*-openbsd*)
tmake_file="${tmake_file} m88k/t-luna-gas"
+ tm_file="m88k/aout-dbx.h aoutos.h m88k/m88k.h openbsd.h ${tm_file}"
+ xm_file="xm-openbsd.h m88k/xm-m88k.h ${xm_file}"
;;
m88k-*-sysv3*)
tm_file=m88k/sysv3.h
# On NetBSD, the headers are already okay, except for math.h.
tmake_file=t-netbsd
;;
- mips*-*-linux*) # Linux MIPS, either endian.
+ mips*-*-linux*) # Linux MIPS, either endian.
xmake_file=x-linux
- case $machine in
- mipsel-*) tm_file="mips/elfl.h mips/linux.h" ;;
- *) tm_file="mips/elf.h mips/linux.h" ;;
- esac
+ case $machine in
+ mips*el-*) tm_file="mips/elfl.h mips/linux.h" ;;
+ *) tm_file="mips/elf.h mips/linux.h" ;;
+ esac
+ tmake_file=t-linux
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
gnu_ld=yes
gas=yes
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
+ if test x$enable_threads = xyes; then
+ thread_file='posix'
+ fi
;;
mips*el-*-openbsd*) # mips little endian
target_cpu_default="MASK_GAS|MASK_ABICALLS"
tm_file=ns32k/tek6200.h
use_collect2=yes
;;
-# This has not been updated to GCC 2.
-# ns32k-ns-genix*)
-# xm_defines=USG
-# xmake_file=ns32k/x-genix
-# tm_file=ns32k/genix.h
-# use_collect2=yes
-# ;;
ns32k-merlin-*)
tm_file=ns32k/merlin.h
use_collect2=yes
ns32k-*-openbsd*)
# Nothing special
;;
-# This has not been updated to GCC 2.
-# pyramid-*-*)
-# cpu_type=pyr
-# xmake_file=pyr/x-pyr
-# use_collect2=yes
-# ;;
-
pj*-linux*)
tm_file="svr4.h pj/linux.h ${tm_file}"
;;
tmake_file=rs6000/t-beos
xmake_file=rs6000/x-beos
;;
- powerpc-*-sysv* | powerpc-*-elf*)
+ powerpc-*-sysv*)
tm_file=rs6000/sysv4.h
xm_file="rs6000/xm-sysv4.h"
xm_defines="USG POSIX"
extra_headers=ppc-asm.h
- if test x$gas = xyes
- then
- tmake_file="rs6000/t-ppcos rs6000/t-ppccomm"
- else
- tmake_file="rs6000/t-ppc rs6000/t-ppccomm"
- fi
+ tmake_file="rs6000/t-ppcos rs6000/t-ppccomm"
xmake_file=rs6000/x-sysv4
;;
powerpc-*-eabiaix*)
- tm_file=rs6000/eabiaix.h
+ tm_file="rs6000/sysv4.h rs6000/eabi.h rs6000/eabiaix.h"
tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
extra_headers=ppc-asm.h
;;
powerpc-*-eabisim*)
- tm_file=rs6000/eabisim.h
+ tm_file="rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h"
+ tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
+ extra_headers=ppc-asm.h
+ ;;
+ powerpc-*-elf*)
+ tm_file="rs6000/sysv4.h"
tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
extra_headers=ppc-asm.h
;;
powerpc-*-eabi*)
- tm_file=rs6000/eabi.h
- if test x$gas = xyes
- then
- tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
- else
- tmake_file="rs6000/t-ppc rs6000/t-ppccomm"
- fi
+ tm_file="rs6000/sysv4.h rs6000/eabi.h"
+ tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
extra_headers=ppc-asm.h
;;
powerpc-*-rtems*)
- tm_file=rs6000/rtems.h
- if test x$gas = xyes
- then
- tmake_file="rs6000/t-ppcgas t-rtems rs6000/t-ppccomm"
- else
- tmake_file="rs6000/t-ppc t-rtems rs6000/t-ppccomm"
- fi
+ tm_file="rs6000/sysv4.h rs6000/eabi.h rs6000/rtems.h"
+ tmake_file="rs6000/t-ppcgas t-rtems rs6000/t-ppccomm"
extra_headers=ppc-asm.h
;;
- powerpc-*-linux-gnulibc1)
- tm_file=rs6000/linux.h
+ powerpc-*-linux*libc1)
+ tm_file="rs6000/sysv4.h rs6000/linux.h"
xm_file=rs6000/xm-sysv4.h
out_file=rs6000/rs6000.c
- if test x$gas = xyes
- then
- tmake_file="rs6000/t-ppcos t-linux t-linux-gnulibc1 rs6000/t-ppccomm"
- else
- tmake_file="rs6000/t-ppc t-linux t-linux-gnulibc1 rs6000/t-ppccomm"
- fi
+ tmake_file="rs6000/t-ppcos t-linux t-linux-gnulibc1 rs6000/t-ppccomm"
xmake_file=x-linux
- extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
extra_headers=ppc-asm.h
if test x$enable_threads = xyes; then
thread_file='posix'
fi
;;
- powerpc-*-linux-gnu*)
- tm_file=rs6000/linux.h
+ powerpc-*-linux*)
+ tm_file="rs6000/sysv4.h rs6000/linux.h"
xm_file="rs6000/xm-sysv4.h"
xm_defines="USG ${xm_defines}"
out_file=rs6000/rs6000.c
- if test x$gas = xyes
- then
- tmake_file="rs6000/t-ppcos t-linux rs6000/t-ppccomm"
- else
- tmake_file="rs6000/t-ppc t-linux rs6000/t-ppccomm"
- fi
+ tmake_file="rs6000/t-ppcos t-linux rs6000/t-ppccomm"
xmake_file=x-linux
- extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
extra_headers=ppc-asm.h
if test x$enable_threads = xyes; then
thread_file='posix'
cpu_type=rs6000
xm_file="rs6000/xm-sysv4.h"
xm_defines="USG POSIX"
- tm_file=rs6000/vxppc.h
+ tm_file="rs6000/sysv4.h rs6000/vxppc.h"
tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
extra_headers=ppc-asm.h
thread_file='vxworks'
cpu_type=rs6000
xm_file="rs6000/xm-sysv4.h"
xm_defines="USG POSIX"
- tm_file=rs6000/vxppcle.h
+ tm_file="rs6000/sysv4.h rs6000/sysv4le.h rs6000/vxppc.h"
tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
extra_headers=ppc-asm.h
thread_file='vxworks'
;;
- powerpcle-*-sysv* | powerpcle-*-elf*)
- tm_file=rs6000/sysv4le.h
+ powerpcle-*-sysv*)
+ tm_file="rs6000/sysv4.h rs6000/sysv4le.h"
xm_file="rs6000/xm-sysv4.h"
xm_defines="USG POSIX"
- if test x$gas = xyes
- then
- tmake_file="rs6000/t-ppcos rs6000/t-ppccomm"
- else
- tmake_file="rs6000/t-ppc rs6000/t-ppccomm"
- fi
+ tmake_file="rs6000/t-ppcos rs6000/t-ppccomm"
xmake_file=rs6000/x-sysv4
extra_headers=ppc-asm.h
;;
+ powerpcle-*-elf*)
+ tm_file="rs6000/sysv4.h rs6000/sysv4le.h"
+ tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
+ extra_headers=ppc-asm.h
+ ;;
powerpcle-*-eabisim*)
- tm_file=rs6000/eabilesim.h
+ tm_file="rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/eabisim.h"
tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
extra_headers=ppc-asm.h
;;
powerpcle-*-eabi*)
- tm_file=rs6000/eabile.h
- if test x$gas = xyes
- then
- tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
- else
- tmake_file="rs6000/t-ppc rs6000/t-ppccomm"
- fi
+ tm_file="rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h"
+ tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
extra_headers=ppc-asm.h
;;
powerpcle-*-solaris2*)
- tm_file=rs6000/sol2.h
+ tm_file="rs6000/sysv4.h rs6000/sysv4le.h rs6000/sol2.h"
xm_file="rs6000/xm-sysv4.h"
xm_defines="USG POSIX"
- if test x$gas = xyes
- then
- tmake_file="rs6000/t-ppcos rs6000/t-ppccomm"
- else
- tmake_file="rs6000/t-ppc rs6000/t-ppccomm"
- fi
+ tmake_file="rs6000/t-ppcos rs6000/t-ppccomm"
xmake_file=rs6000/x-sysv4
extra_headers=ppc-asm.h
;;
then
tmake_file=rs6000/t-xnewas
else
- tmake_file="rs6000/t-newas rs6000/t-aix41"
+ tmake_file=rs6000/t-newas
+ fi
+ if test "$gnu_ld" = yes
+ then
+ xmake_file=rs6000/x-aix41-gld
+ else
+ tmake_file='rs6000/t-newas'
fi
xmake_file=rs6000/x-aix41
float_format=none
xmake_file=rs6000/x-aix41
float_format=none
use_collect2=yes
+ thread_file='aix'
;;
rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*)
tm_file=rs6000/aix43.h
xmake_file=rs6000/x-aix41
float_format=none
use_collect2=yes
+ thread_file='aix'
;;
rs6000-ibm-aix*)
float_format=none
use_collect2=yes
;;
sh-*-elf*)
- tm_file=sh/elf.h
+ tmake_file="sh/t-sh sh/t-elf"
+ tm_file="sh/sh.h sh/elf.h"
float_format=sh
;;
sh-*-rtemself*)
- tmake_file="sh/t-sh t-rtems"
- tm_file=sh/rtemself.h
+ tmake_file="sh/t-sh sh/t-elf t-rtems"
+ tm_file="sh/sh.h sh/elf.h sh/rtemself.h"
float_format=sh
;;
sh-*-rtems*)
tmake_file="sh/t-sh t-rtems"
- tm_file=sh/rtems.h
+ tm_file="sh/sh.h sh/rtems.h"
+ float_format=sh
+ ;;
+ sh-*-linux*)
+ tm_file="sh/sh.h sh/elf.h sh/linux.h"
+ tmake_file="sh/t-sh sh/t-elf sh/t-linux"
+ xmake_file=x-linux
+ gas=yes gnu_ld=yes
+ if test x$enable_threads = xyes; then
+ thread_file='posix'
+ fi
float_format=sh
;;
sh-*-*)
#float_format=i128
float_format=i64
;;
- sparc-*-linux-gnuaout*) # Sparc's running GNU/Linux, a.out
+ sparc-*-linux*aout*) # Sparc's running GNU/Linux, a.out
xm_file="${xm_file} sparc/xm-linux.h"
tm_file=sparc/linux-aout.h
xmake_file=x-linux
gnu_ld=yes
;;
- sparc-*-linux-gnulibc1*) # Sparc's running GNU/Linux, libc5
+ sparc-*-linux*libc1*) # Sparc's running GNU/Linux, libc5
xm_file="${xm_file} sparc/xm-linux.h"
xmake_file=x-linux
tm_file=sparc/linux.h
gnu_ld=yes
float_format=sparc
;;
- sparc-*-linux-gnu*) # Sparc's running GNU/Linux, libc6
+ sparc-*-linux*) # Sparc's running GNU/Linux, libc6
xm_file="${xm_file} sparc/xm-linux.h"
xmake_file=x-linux
tm_file=sparc/linux.h
xm_file="sparc/xm-sysv4-64.h sparc/xm-sol2.h"
xm_defines="USG POSIX"
tmake_file="sparc/t-sol2 sparc/t-sol2-64"
+ if test x$gnu_ld = xyes; then
+ tmake_file="$tmake_file sparc/t-slibgcc"
+ else
+ tmake_file="$tmake_file sparc/t-slibgcc-sld"
+ fi
xmake_file=sparc/x-sysv4
extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o"
float_format=none
xm_defines="USG POSIX"
tm_file="sparc/sol2.h sparc/hal.h"
tmake_file="sparc/t-halos sparc/t-sol2"
+ if test x$gnu_ld = xyes; then
+ tmake_file="$tmake_file sparc/t-slibgcc"
+ else
+ tmake_file="$tmake_file sparc/t-slibgcc-sld"
+ fi
xmake_file=sparc/x-sysv4
extra_parts="crt1.o crti.o crtn.o gmon.o crtbegin.o crtend.o"
case $machine in
- *-*-solaris2.0-4)
+ *-*-solaris2.[0-4])
float_format=i128
;;
*)
xm_file="sparc/xm-sysv4.h sparc/xm-sol2.h"
xm_defines="USG POSIX"
tmake_file=sparc/t-sol2
+ if test x$gnu_ld = xyes; then
+ tmake_file="$tmake_file sparc/t-slibgcc"
+ else
+ tmake_file="$tmake_file sparc/t-slibgcc-sld"
+ fi
xmake_file=sparc/x-sysv4
extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
- case $machine in
- *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*) ;;
- *-*-solaris2*)
- if test x$gnu_ld = xyes
- then
- tm_file=sparc/sol2-64.h
- else
- tm_file=sparc/sol2-sld-64.h
- fi
- tmake_file="$tmake_file sparc/t-sol2-64"
- ;;
- esac
+# At the moment, 32-to-64 cross compilation doesn't work.
+# case $machine in
+#changequote(,)dnl
+# *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*) ;;
+#changequote([,])dnl
+# *-*-solaris2*)
+# if test x$gnu_ld = xyes
+# then
+# tm_file=sparc/sol2-64.h
+# else
+# tm_file=sparc/sol2-sld-64.h
+# fi
+# tmake_file="$tmake_file sparc/t-sol2-64"
+# ;;
+# esac
case $machine in
*-*-solaris2.[0-4])
float_format=i128
fi
float_format=sparc
;;
-# This hasn't been upgraded to GCC 2.
-# tahoe-harris-*) # Harris tahoe, using COFF.
-# tm_file=tahoe/harris.h
-# ;;
-# tahoe-*-bsd*) # tahoe running BSD
-# ;;
- thumb-*-coff* | thumbel-*-coff*)
- tm_file=arm/tcoff.h
- out_file=arm/thumb.c
- xm_file=arm/xm-thumb.h
- md_file=arm/thumb.md
- tmake_file=arm/t-thumb
- tm_p_file=arm/thumb-protos.h
- ;;
- thumb-*-elf* | thumbel-*-elf*)
- tm_file=arm/telf.h
- out_file=arm/thumb.c
- xm_file=arm/xm-thumb.h
- md_file=arm/thumb.md
- tmake_file=arm/t-thumb-elf
- tm_p_file=arm/thumb-protos.h
- ;;
- thumb-*-linux-gnu*)
- tm_file=arm/linux-telf.h
- out_file=arm/thumb.c
- xm_file=arm/xm-thumb.h
- md_file=arm/thumb.md
- tmake_file=arm/t-thumb-linux
- tm_p_file=arm/thumb-protos.h
- ;;
- thumb-*-uclinux*)
- tm_file=arm/uclinux-telf.h
- out_file=arm/thumb.c
- md_file=arm/thumb.md
- tmake_file=arm/t-thumb-linux
- xm_file=arm/xm-thumb.h
- tm_p_file=arm/thumb-protos.h
- ;;
- thumb-wrs-vxworks)
- tm_file=arm/tcoff.h
- out_file=arm/thumb.c
- xm_file=arm/xm-thumb.h
- md_file=arm/thumb.md
- tmake_file=arm/t-thumb
- thread_file='vxworks'
- tm_p_file=arm/thumb-protos.h
- ;;
- thumb-*-pe)
- tm_file=arm/tpe.h
- out_file=arm/thumb.c
- xm_file=arm/xm-thumb.h
- md_file=arm/thumb.md
- tmake_file=arm/t-pe-thumb
- extra_objs=pe.o
- tm_p_file=arm/thumb-protos.h
- ;;
-# This hasn't been upgraded to GCC 2.
-# tron-*-*)
-# cpu_type=gmicro
-# use_collect2=yes
-# ;;
+ thumb*-*-*)
+ { echo "configure: error:
+*** The Thumb targets have been depreciated. The equivalent
+*** ARM based toolchain can now generated Thumb instructions
+*** when the -mthumb switch is given to the compiler." 1>&2; exit 1; }
+ ;;
v850-*-rtems*)
cpu_type=v850
tm_file="v850/rtems.h"
;;
vax-*-openbsd*)
tmake_file="${tmake_file} vax/t-openbsd"
+ tm_file="vax/vax.h vax/openbsd1.h openbsd.h ${tm_file}"
+ xm_file="xm-openbsd.h vax/xm-vax.h"
+ float_format=vax
+ use_collect2=yes
;;
vax-*-ultrix*) # vaxen running ultrix
tm_file="${tm_file} vax/ultrix.h"
- use_collect2=yes
float_format=vax
;;
vax-*-vms*) # vaxen running VMS
esac
case $machine in
- *-*-linux-gnu*)
+ *-*-linux*)
;; # Existing GNU/Linux systems do not use the GNU setup.
*-*-gnu*)
# On the GNU system, the setup is just about the same on
then
if test x$gnu_ld = xyes
then
- target_cpu_default2=20
+ target_cpu_default2="MASK_GAS|MASK_SPLIT_ADDR"
else
- target_cpu_default2=16
+ target_cpu_default2="MASK_GAS"
fi
fi
;;
mips*-*-*)
if test x$gas = xyes
then
- target_cpu_default2=16
+ target_cpu_default2="MASK_GAS"
fi
;;
powerpc*-*-* | rs6000-*-*)
for file in `eval echo '$'$var`; do
case $file in
- auto-config.h)
+ auto-host.h | auto-build.h )
;;
*)
echo '#ifdef IN_GCC' >>$link
esac
echo "#include \"$file\"" >>$link
case $file in
- auto-config.h)
+ auto-host.h | auto-build.h )
;;
*)
echo '#endif' >>$link
-ALL_LINGUAS="en_UK"
+ALL_LINGUAS="en_GB"
-# NLS support is still experimental, so disable it by default for now.
+# Enable NLS support by default
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
:
else
- enable_nls=no
+ enable_nls=yes
fi
+# if cross compiling, disable NLS support.
+# It's not worth the trouble, at least for now.
+
+if test "${build}" != "${host}" && test "x$enable_nls" = "xyes"; then
+ echo "configure: warning: Disabling NLS support for canadian cross compiler." 1>&2
+ enable_nls=no
+fi
+
echo $ac_n "checking for strerror in -lcposix""... $ac_c" 1>&6
-echo "configure:6640: checking for strerror in -lcposix" >&5
+echo "configure:7193: checking for strerror in -lcposix" >&5
ac_lib_var=`echo cposix'_'strerror | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lcposix $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6648 "configure"
+#line 7201 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
strerror()
; return 0; }
EOF
-if { (eval echo configure:6659: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7212: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:6682: checking for working const" >&5
+echo "configure:7235: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6687 "configure"
+#line 7240 "configure"
#include "confdefs.h"
int main() {
/* Ultrix mips cc rejects this. */
-typedef int charset[2]; const charset x = {0,0};
+typedef int charset[2]; const charset x;
/* SunOS 4.1.1 cc rejects this. */
char const *const *ccp;
char **p;
; return 0; }
EOF
-if { (eval echo configure:6736: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:7289: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
-echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:6757: checking for inline" >&5
-if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_cv_c_inline=no
-for ac_kw in inline __inline__ __inline; do
- cat > conftest.$ac_ext <<EOF
-#line 6764 "configure"
-#include "confdefs.h"
-
-int main() {
-} int $ac_kw foo() {
-; return 0; }
-EOF
-if { (eval echo configure:6771: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_c_inline=$ac_kw; break
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
-fi
-rm -f conftest*
-done
-
-fi
-
-echo "$ac_t""$ac_cv_c_inline" 1>&6
-case "$ac_cv_c_inline" in
- inline | yes) ;;
- no) cat >> confdefs.h <<\EOF
-#define inline
-EOF
- ;;
- *) cat >> confdefs.h <<EOF
-#define inline $ac_cv_c_inline
-EOF
- ;;
-esac
-
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:6797: checking for off_t" >&5
+echo "configure:7310: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6802 "configure"
+#line 7315 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:6830: checking for size_t" >&5
+echo "configure:7343: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6835 "configure"
+#line 7348 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:6865: checking for working alloca.h" >&5
+echo "configure:7378: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6870 "configure"
+#line 7383 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
-void *p = alloca(2 * sizeof(int));
+char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:6877: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7390: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:6898: checking for alloca" >&5
+echo "configure:7411: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6903 "configure"
+#line 7416 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:6931: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7444: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:6963: checking whether alloca needs Cray hooks" >&5
+echo "configure:7476: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6968 "configure"
+#line 7481 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
#else
wenotbecray
#endif
-
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "webecray" >/dev/null 2>&1; then
- rm -rf conftest*
- ac_cv_os_cray=yes
-else
- rm -rf conftest*
- ac_cv_os_cray=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_os_cray" 1>&6
-if test $ac_cv_os_cray = yes; then
-for ac_func in _getb67 GETB67 getb67; do
- echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6993: checking for $ac_func" >&5
-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 6998 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char $ac_func();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-$ac_func();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo configure:7021: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_$ac_func=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_$ac_func=no"
-fi
-rm -f conftest*
-fi
-
-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- cat >> confdefs.h <<EOF
-#define CRAY_STACKSEG_END $ac_func
-EOF
-
- break
-else
- echo "$ac_t""no" 1>&6
-fi
-
-done
-fi
-
-echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:7048: checking stack direction for C alloca" >&5
-if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test "$cross_compiling" = yes; then
- ac_cv_c_stack_direction=0
-else
- cat > conftest.$ac_ext <<EOF
-#line 7056 "configure"
-#include "confdefs.h"
-find_stack_direction ()
-{
- static char *addr = 0;
- auto char dummy;
- if (addr == 0)
- {
- addr = &dummy;
- return find_stack_direction ();
- }
- else
- return (&dummy > addr) ? 1 : -1;
-}
-main ()
-{
- exit (find_stack_direction() < 0);
-}
-EOF
-if { (eval echo configure:7075: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- ac_cv_c_stack_direction=1
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_c_stack_direction=-1
-fi
-rm -fr conftest*
-fi
-
-fi
-
-echo "$ac_t""$ac_cv_c_stack_direction" 1>&6
-cat >> confdefs.h <<EOF
-#define STACK_DIRECTION $ac_cv_c_stack_direction
-EOF
-
-fi
-
-for ac_hdr in unistd.h
-do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:7100: checking for $ac_hdr" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 7105 "configure"
-#include "confdefs.h"
-#include <$ac_hdr>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7110: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
+
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "webecray" >/dev/null 2>&1; then
rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
+ ac_cv_os_cray=yes
else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
+ ac_cv_os_cray=no
fi
rm -f conftest*
+
fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_hdr 1
-EOF
-
-else
- echo "$ac_t""no" 1>&6
-fi
-done
-for ac_func in getpagesize
-do
-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7139: checking for $ac_func" >&5
+echo "$ac_t""$ac_cv_os_cray" 1>&6
+if test $ac_cv_os_cray = yes; then
+for ac_func in _getb67 GETB67 getb67; do
+ echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:7506: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7144 "configure"
+#line 7511 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:7167: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7534: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
echo "$ac_t""yes" 1>&6
- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
cat >> confdefs.h <<EOF
-#define $ac_tr_func 1
+#define CRAY_STACKSEG_END $ac_func
EOF
-
+
+ break
else
echo "$ac_t""no" 1>&6
fi
+
done
+fi
-echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:7192: checking for working mmap" >&5
-if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
+echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
+echo "configure:7561: checking stack direction for C alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
- ac_cv_func_mmap_fixed_mapped=no
+ ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 7200 "configure"
+#line 7569 "configure"
#include "confdefs.h"
-
-/* Thanks to Mike Haertel and Jim Avera for this test.
- Here is a matrix of mmap possibilities:
- mmap private not fixed
- mmap private fixed at somewhere currently unmapped
- mmap private fixed at somewhere already mapped
- mmap shared not fixed
- mmap shared fixed at somewhere currently unmapped
- mmap shared fixed at somewhere already mapped
- For private mappings, we should verify that changes cannot be read()
- back from the file, nor mmap's back from the file at a different
- address. (There have been systems where private was not correctly
- implemented like the infamous i386 svr4.0, and systems where the
- VM page cache was not coherent with the filesystem buffer cache
- like early versions of FreeBSD and possibly contemporary NetBSD.)
- For shared mappings, we should conversely verify that changes get
- propogated back to all the places they're supposed to be.
-
- Grep wants private fixed already mapped.
- The main things grep needs to know about mmap are:
- * does it exist and is it safe to write into the mmap'd area
- * how to use it (BSD variants) */
-#include <sys/types.h>
-#include <fcntl.h>
-#include <sys/mman.h>
-#include <stdlib.h>
-#include <sys/stat.h>
-
-#ifdef HAVE_UNISTD_H
-# include <unistd.h>
-#endif
-
-/* This mess was copied from the GNU getpagesize.h. */
-#ifndef HAVE_GETPAGESIZE
-
-/* Assume that all systems that can run configure have sys/param.h. */
-# ifndef HAVE_SYS_PARAM_H
-# define HAVE_SYS_PARAM_H 1
-# endif
-
-# ifdef _SC_PAGESIZE
-# define getpagesize() sysconf(_SC_PAGESIZE)
-# else /* no _SC_PAGESIZE */
-# ifdef HAVE_SYS_PARAM_H
-# include <sys/param.h>
-# ifdef EXEC_PAGESIZE
-# define getpagesize() EXEC_PAGESIZE
-# else /* no EXEC_PAGESIZE */
-# ifdef NBPG
-# define getpagesize() NBPG * CLSIZE
-# ifndef CLSIZE
-# define CLSIZE 1
-# endif /* no CLSIZE */
-# else /* no NBPG */
-# ifdef NBPC
-# define getpagesize() NBPC
-# else /* no NBPC */
-# ifdef PAGESIZE
-# define getpagesize() PAGESIZE
-# endif /* PAGESIZE */
-# endif /* no NBPC */
-# endif /* no NBPG */
-# endif /* no EXEC_PAGESIZE */
-# else /* no HAVE_SYS_PARAM_H */
-# define getpagesize() 8192 /* punt totally */
-# endif /* no HAVE_SYS_PARAM_H */
-# endif /* no _SC_PAGESIZE */
-
-#endif /* no HAVE_GETPAGESIZE */
-
-#ifdef __cplusplus
-extern "C" { void *malloc(unsigned); }
-#else
-char *malloc();
-#endif
-
-int
-main()
+find_stack_direction ()
{
- char *data, *data2, *data3;
- int i, pagesize;
- int fd;
-
- pagesize = getpagesize();
-
- /*
- * First, make a file with some known garbage in it.
- */
- data = (char*)malloc(pagesize);
- if (!data)
- exit(1);
- for (i = 0; i < pagesize; ++i)
- *(data + i) = rand();
- umask(0);
- fd = creat("conftestmmap", 0600);
- if (fd < 0)
- exit(1);
- if (write(fd, data, pagesize) != pagesize)
- exit(1);
- close(fd);
-
- /*
- * Next, try to mmap the file at a fixed address which
- * already has something else allocated at it. If we can,
- * also make sure that we see the same garbage.
- */
- fd = open("conftestmmap", O_RDWR);
- if (fd < 0)
- exit(1);
- data2 = (char*)malloc(2 * pagesize);
- if (!data2)
- exit(1);
- data2 += (pagesize - ((int) data2 & (pagesize - 1))) & (pagesize - 1);
- if (data2 != mmap(data2, pagesize, PROT_READ | PROT_WRITE,
- MAP_PRIVATE | MAP_FIXED, fd, 0L))
- exit(1);
- for (i = 0; i < pagesize; ++i)
- if (*(data + i) != *(data2 + i))
- exit(1);
-
- /*
- * Finally, make sure that changes to the mapped area
- * do not percolate back to the file as seen by read().
- * (This is a bug on some variants of i386 svr4.0.)
- */
- for (i = 0; i < pagesize; ++i)
- *(data2 + i) = *(data2 + i) + 1;
- data3 = (char*)malloc(pagesize);
- if (!data3)
- exit(1);
- if (read(fd, data3, pagesize) != pagesize)
- exit(1);
- for (i = 0; i < pagesize; ++i)
- if (*(data + i) != *(data3 + i))
- exit(1);
- close(fd);
- unlink("conftestmmap");
- exit(0);
+ static char *addr = 0;
+ auto char dummy;
+ if (addr == 0)
+ {
+ addr = &dummy;
+ return find_stack_direction ();
+ }
+ else
+ return (&dummy > addr) ? 1 : -1;
+}
+main ()
+{
+ exit (find_stack_direction() < 0);
}
-
EOF
-if { (eval echo configure:7343: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:7588: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
- ac_cv_func_mmap_fixed_mapped=yes
+ ac_cv_c_stack_direction=1
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -fr conftest*
- ac_cv_func_mmap_fixed_mapped=no
+ ac_cv_c_stack_direction=-1
fi
rm -fr conftest*
fi
fi
-echo "$ac_t""$ac_cv_func_mmap_fixed_mapped" 1>&6
-if test $ac_cv_func_mmap_fixed_mapped = yes; then
- cat >> confdefs.h <<\EOF
-#define HAVE_MMAP 1
+echo "$ac_t""$ac_cv_c_stack_direction" 1>&6
+cat >> confdefs.h <<EOF
+#define STACK_DIRECTION $ac_cv_c_stack_direction
EOF
fi
-
+
for ac_hdr in argz.h limits.h locale.h nl_types.h malloc.h string.h \
unistd.h sys/param.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:7371: checking for $ac_hdr" >&5
+echo "configure:7615: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7376 "configure"
+#line 7620 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7381: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7625: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
strdup __argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7411: checking for $ac_func" >&5
+echo "configure:7655: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7416 "configure"
+#line 7660 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:7439: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7683: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in stpcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7468: checking for $ac_func" >&5
+echo "configure:7712: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7473 "configure"
+#line 7717 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:7496: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7740: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:7530: checking for LC_MESSAGES" >&5
+echo "configure:7774: checking for LC_MESSAGES" >&5
if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7535 "configure"
+#line 7779 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
-if { (eval echo configure:7542: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7786: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
fi
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:7563: checking whether NLS is requested" >&5
+echo "configure:7807: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
EOF
echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:7583: checking whether included gettext is requested" >&5
+echo "configure:7827: checking whether included gettext is requested" >&5
# Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then
withval="$with_included_gettext"
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:7602: checking for libintl.h" >&5
+echo "configure:7846: checking for libintl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7607 "configure"
+#line 7851 "configure"
#include "confdefs.h"
#include <libintl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7612: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7856: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:7629: checking for gettext in libc" >&5
+echo "configure:7873: checking for gettext in libc" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7634 "configure"
+#line 7878 "configure"
#include "confdefs.h"
#include <libintl.h>
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:7641: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7885: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libc=yes
else
if test "$gt_cv_func_gettext_libc" != "yes"; then
echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:7657: checking for bindtextdomain in -lintl" >&5
+echo "configure:7901: checking for bindtextdomain in -lintl" >&5
ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7665 "configure"
+#line 7909 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
bindtextdomain()
; return 0; }
EOF
-if { (eval echo configure:7676: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7920: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:7692: checking for gettext in libintl" >&5
+echo "configure:7936: checking for gettext in libintl" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for gettext in -lintl""... $ac_c" 1>&6
-echo "configure:7697: checking for gettext in -lintl" >&5
+echo "configure:7941: checking for gettext in -lintl" >&5
ac_lib_var=`echo intl'_'gettext | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7705 "configure"
+#line 7949 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gettext()
; return 0; }
EOF
-if { (eval echo configure:7716: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7960: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7755: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
+echo "configure:7999: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'gcc_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$MSGFMT" in
/*)
- ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
+ gcc_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then
- ac_cv_path_MSGFMT="$ac_dir/$ac_word"
+ gcc_cv_path_MSGFMT="$ac_dir/$ac_word"
break
fi
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="no"
+ test -z "$gcc_cv_path_MSGFMT" && gcc_cv_path_MSGFMT="no"
;;
esac
fi
-MSGFMT="$ac_cv_path_MSGFMT"
+MSGFMT="$gcc_cv_path_MSGFMT"
if test -n "$MSGFMT"; then
echo "$ac_t""$MSGFMT" 1>&6
else
for ac_func in dcgettext
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7789: checking for $ac_func" >&5
+echo "configure:8033: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7794 "configure"
+#line 8038 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:7817: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8061: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7844: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
+echo "configure:8088: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'gcc_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$GMSGFMT" in
/*)
- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+ gcc_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
;;
?:/*)
- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
+ gcc_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
+ gcc_cv_path_GMSGFMT="$ac_dir/$ac_word"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
+ test -z "$gcc_cv_path_GMSGFMT" && gcc_cv_path_GMSGFMT="$MSGFMT"
;;
esac
fi
-GMSGFMT="$ac_cv_path_GMSGFMT"
+GMSGFMT="$gcc_cv_path_GMSGFMT"
if test -n "$GMSGFMT"; then
echo "$ac_t""$GMSGFMT" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7880: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
+echo "configure:8124: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'gcc_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$XGETTEXT" in
/*)
- ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+ gcc_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
- ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
+ gcc_cv_path_XGETTEXT="$ac_dir/$ac_word"
break
fi
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
+ test -z "$gcc_cv_path_XGETTEXT" && gcc_cv_path_XGETTEXT=":"
;;
esac
fi
-XGETTEXT="$ac_cv_path_XGETTEXT"
+XGETTEXT="$gcc_cv_path_XGETTEXT"
if test -n "$XGETTEXT"; then
echo "$ac_t""$XGETTEXT" 1>&6
else
fi
cat > conftest.$ac_ext <<EOF
-#line 7912 "configure"
+#line 8156 "configure"
#include "confdefs.h"
int main() {
return _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:7920: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8164: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
CATOBJEXT=.gmo
DATADIRNAME=share
fi
rm -f conftest*
INSTOBJEXT=.mo
+ else
+ create_catalogs="no"
fi
fi
if test "$CATOBJEXT" = "NONE"; then
echo $ac_n "checking whether catgets can be used""... $ac_c" 1>&6
-echo "configure:7943: checking whether catgets can be used" >&5
+echo "configure:8189: checking whether catgets can be used" >&5
# Check whether --with-catgets or --without-catgets was given.
if test "${with_catgets+set}" = set; then
withval="$with_catgets"
if test "$nls_cv_use_catgets" = "yes"; then
echo $ac_n "checking for main in -li""... $ac_c" 1>&6
-echo "configure:7956: checking for main in -li" >&5
+echo "configure:8202: checking for main in -li" >&5
ac_lib_var=`echo i'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-li $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7964 "configure"
+#line 8210 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:7971: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8217: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for catgets""... $ac_c" 1>&6
-echo "configure:7999: checking for catgets" >&5
+echo "configure:8245: checking for catgets" >&5
if eval "test \"`echo '$''{'ac_cv_func_catgets'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8004 "configure"
+#line 8250 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char catgets(); below. */
; return 0; }
EOF
-if { (eval echo configure:8027: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8273: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_catgets=yes"
else
# Extract the first word of "gencat", so it can be a program name with args.
set dummy gencat; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8049: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_GENCAT'+set}'`\" = set"; then
+echo "configure:8295: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'gcc_cv_path_GENCAT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$GENCAT" in
/*)
- ac_cv_path_GENCAT="$GENCAT" # Let the user override the test with a path.
+ gcc_cv_path_GENCAT="$GENCAT" # Let the user override the test with a path.
;;
?:/*)
- ac_cv_path_GENCAT="$GENCAT" # Let the user override the test with a dos path.
+ gcc_cv_path_GENCAT="$GENCAT" # Let the user override the test with a dos path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_path_GENCAT="$ac_dir/$ac_word"
+ gcc_cv_path_GENCAT="$ac_dir/$ac_word"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_path_GENCAT" && ac_cv_path_GENCAT="no"
+ test -z "$gcc_cv_path_GENCAT" && gcc_cv_path_GENCAT="no"
;;
esac
fi
-GENCAT="$ac_cv_path_GENCAT"
+GENCAT="$gcc_cv_path_GENCAT"
if test -n "$GENCAT"; then
echo "$ac_t""$GENCAT" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8085: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
+echo "configure:8331: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'gcc_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$GMSGFMT" in
/*)
- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+ gcc_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
;;
?:/*)
- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
+ gcc_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
+ gcc_cv_path_GMSGFMT="$ac_dir/$ac_word"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="no"
+ test -z "$gcc_cv_path_GMSGFMT" && gcc_cv_path_GMSGFMT="no"
;;
esac
fi
-GMSGFMT="$ac_cv_path_GMSGFMT"
+GMSGFMT="$gcc_cv_path_GMSGFMT"
if test -n "$GMSGFMT"; then
echo "$ac_t""$GMSGFMT" 1>&6
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8122: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
+echo "configure:8368: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'gcc_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$GMSGFMT" in
/*)
- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+ gcc_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then
- ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
+ gcc_cv_path_GMSGFMT="$ac_dir/$ac_word"
break
fi
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="no"
+ test -z "$gcc_cv_path_GMSGFMT" && gcc_cv_path_GMSGFMT="msgfmt"
;;
esac
fi
-GMSGFMT="$ac_cv_path_GMSGFMT"
+GMSGFMT="$gcc_cv_path_GMSGFMT"
if test -n "$GMSGFMT"; then
echo "$ac_t""$GMSGFMT" 1>&6
else
echo "$ac_t""no" 1>&6
fi
+ if test "$GMSGFMT" = "msgfmt"; then
+ create_catalogs="no"
+ fi
fi
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8157: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
+echo "configure:8406: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'gcc_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$XGETTEXT" in
/*)
- ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+ gcc_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
- ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
+ gcc_cv_path_XGETTEXT="$ac_dir/$ac_word"
break
fi
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
+ test -z "$gcc_cv_path_XGETTEXT" && gcc_cv_path_XGETTEXT=":"
;;
esac
fi
-XGETTEXT="$ac_cv_path_XGETTEXT"
+XGETTEXT="$gcc_cv_path_XGETTEXT"
if test -n "$XGETTEXT"; then
echo "$ac_t""$XGETTEXT" 1>&6
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8215: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
+echo "configure:8464: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'gcc_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$MSGFMT" in
/*)
- ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
+ gcc_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then
- ac_cv_path_MSGFMT="$ac_dir/$ac_word"
+ gcc_cv_path_MSGFMT="$ac_dir/$ac_word"
break
fi
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="msgfmt"
+ test -z "$gcc_cv_path_MSGFMT" && gcc_cv_path_MSGFMT="msgfmt"
;;
esac
fi
-MSGFMT="$ac_cv_path_MSGFMT"
+MSGFMT="$gcc_cv_path_MSGFMT"
if test -n "$MSGFMT"; then
echo "$ac_t""$MSGFMT" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8249: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
+echo "configure:8498: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'gcc_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$GMSGFMT" in
/*)
- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+ gcc_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
;;
?:/*)
- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
+ gcc_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
+ gcc_cv_path_GMSGFMT="$ac_dir/$ac_word"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
+ test -z "$gcc_cv_path_GMSGFMT" && gcc_cv_path_GMSGFMT="$MSGFMT"
;;
esac
fi
-GMSGFMT="$ac_cv_path_GMSGFMT"
+GMSGFMT="$gcc_cv_path_GMSGFMT"
if test -n "$GMSGFMT"; then
echo "$ac_t""$GMSGFMT" 1>&6
else
echo "$ac_t""no" 1>&6
fi
+ if test "$MSGFMT" = "msgfmt" && test "$GMSGFMT" = "msgfmt"; then
+ create_catalogs="no"
+ fi
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8285: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
+echo "configure:8537: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'gcc_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$XGETTEXT" in
/*)
- ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+ gcc_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
- ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
+ gcc_cv_path_XGETTEXT="$ac_dir/$ac_word"
break
fi
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
+ test -z "$gcc_cv_path_XGETTEXT" && gcc_cv_path_XGETTEXT=":"
;;
esac
fi
-XGETTEXT="$ac_cv_path_XGETTEXT"
+XGETTEXT="$gcc_cv_path_XGETTEXT"
if test -n "$XGETTEXT"; then
echo "$ac_t""$XGETTEXT" 1>&6
else
fi
fi
+
+
# We need to process the po/ directory.
POSUB=po
else
- if test "x$CATOBJEXT" != "x"; then
+ if test "x$create_catalogs" = "xno"; then
+ echo "configure: warning: No program for building catalogs found -> building disabled" 1>&2
+ fi
+
+ if test "x$CATOBJEXT" != "x" && test "x$create_catalogs" != "xno" ; then
if test "x$ALL_LINGUAS" = "x"; then
LINGUAS=
else
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:8378: checking for catalogs to be installed" >&5
- NEW_LINGUAS=
- for lang in ${LINGUAS=$ALL_LINGUAS}; do
- case "$ALL_LINGUAS" in
- *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
- esac
- done
- LINGUAS=$NEW_LINGUAS
+echo "configure:8636: checking for catalogs to be installed" >&5
+ if test "x$LINGUAS" = "x"; then
+ LINGUAS=$ALL_LINGUAS
+ else
+ NEW_LINGUAS=
+ for lang in $ALL_LINGUAS; do
+ case " $LINGUAS " in
+ *" $lang "*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
+ esac
+ done
+ LINGUAS=$NEW_LINGUAS
+ fi
echo "$ac_t""$LINGUAS" 1>&6
fi
if test "$CATOBJEXT" = ".cat"; then
ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:8406: checking for linux/version.h" >&5
+echo "configure:8668: checking for linux/version.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8411 "configure"
+#line 8673 "configure"
#include "confdefs.h"
#include <linux/version.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8416: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8678: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking whether windows registry support is requested""... $ac_c" 1>&6
-echo "configure:8491: checking whether windows registry support is requested" >&5
+echo "configure:8753: checking whether windows registry support is requested" >&5
if test x$enable_win32_registry != xno; then
cat >> confdefs.h <<\EOF
#define ENABLE_WIN32_REGISTRY 1
if test x$enable_win32_registry != xno; then
echo $ac_n "checking registry key on windows hosts""... $ac_c" 1>&6
-echo "configure:8520: checking registry key on windows hosts" >&5
+echo "configure:8782: checking registry key on windows hosts" >&5
cat >> confdefs.h <<EOF
#define WIN32_REGISTRY_KEY "$gcc_cv_win32_registry_key"
EOF
cross_overrides="${topdir}/cross-make"
fi
+# If this is a cross-compiler that does not
+# have its own set of headers then define
+# inhibit_libc
+
+# If this is using newlib, then define inhibit_libc in
+# LIBGCC2_CFLAGS. This will cause __eprintf to be left out of
+# libgcc.a, but that's OK because newlib should have its own version of
+# assert.h.
+inhibit_libc=
+if test x$host != x$target && test x$with_headers = x; then
+ inhibit_libc=-Dinhibit_libc
+else
+ if test x$with_newlib = xyes; then
+ inhibit_libc=-Dinhibit_libc
+ fi
+fi
+
+
# When building gcc with a cross-compiler, we need to fix a few things.
# This must come after cross-make as we want all.build to override
# all.cross.
# fi
fi
-# Figure out what assembler alignment features are present.
-echo $ac_n "checking assembler alignment features""... $ac_c" 1>&6
-echo "configure:8696: checking assembler alignment features" >&5
+# Figure out what assembler we will be using.
+echo $ac_n "checking what assembler to use""... $ac_c" 1>&6
+echo "configure:8976: checking what assembler to use" >&5
gcc_cv_as=
-gcc_cv_as_alignment_features=
+gcc_cv_gas_major_version=
+gcc_cv_gas_minor_version=
gcc_cv_as_gas_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/gas
if test -x "$DEFAULT_ASSEMBLER"; then
gcc_cv_as="$DEFAULT_ASSEMBLER"
done
gcc_cv_gas_major_version=`expr "$gcc_cv_gas_version" : "VERSION=\([0-9]*\)"`
gcc_cv_gas_minor_version=`expr "$gcc_cv_gas_version" : "VERSION=[0-9]*\.\([0-9]*\)"`
- if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
- # Gas version 2.6 and later support for .balign and .p2align.
- # bytes to skip when using .p2align.
- if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 6 -o "$gcc_cv_gas_major_version" -gt 2; then
- gcc_cv_as_alignment_features=".balign and .p2align"
- cat >> confdefs.h <<\EOF
-#define HAVE_GAS_BALIGN_AND_P2ALIGN 1
-EOF
-
- fi
- # Gas version 2.8 and later support specifying the maximum
- # bytes to skip when using .p2align.
- if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 8 -o "$gcc_cv_gas_major_version" -gt 2; then
- gcc_cv_as_alignment_features=".p2align including maximum skip"
- cat >> confdefs.h <<\EOF
-#define HAVE_GAS_MAX_SKIP_P2ALIGN 1
-EOF
+fi
- fi
- fi
-elif test x$host = x$target; then
+if test "x$gcc_cv_as" = x -a x$host = x$target; then
# Native build.
# Search the same directories that the installed compiler will
# search. Else we may find the wrong assembler and lose. If we
fi
done
fi
-if test x$gcc_cv_as != x; then
+if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
+ echo "$ac_t"""newly built gas"" 1>&6
+else
+ echo "$ac_t""$gcc_cv_as" 1>&6
+fi
+
+# Figure out what nm we will be using.
+echo $ac_n "checking what nm to use""... $ac_c" 1>&6
+echo "configure:9061: checking what nm to use" >&5
+if test -x nm$host_exeext; then
+ gcc_cv_nm=./nm$host_exeext
+elif test x$host = x$target; then
+ # Native build.
+ gcc_cv_nm=nm$host_exeext
+fi
+echo "$ac_t""$gcc_cv_nm" 1>&6
+
+# Figure out what assembler alignment features are present.
+echo $ac_n "checking assembler alignment features""... $ac_c" 1>&6
+echo "configure:9072: checking assembler alignment features" >&5
+gcc_cv_as_alignment_features=
+if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
+ # Gas version 2.6 and later support for .balign and .p2align.
+ # bytes to skip when using .p2align.
+ if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 6 -o "$gcc_cv_gas_major_version" -gt 2; then
+ gcc_cv_as_alignment_features=".balign and .p2align"
+ cat >> confdefs.h <<\EOF
+#define HAVE_GAS_BALIGN_AND_P2ALIGN 1
+EOF
+
+ fi
+ # Gas version 2.8 and later support specifying the maximum
+ # bytes to skip when using .p2align.
+ if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 8 -o "$gcc_cv_gas_major_version" -gt 2; then
+ gcc_cv_as_alignment_features=".p2align including maximum skip"
+ cat >> confdefs.h <<\EOF
+#define HAVE_GAS_MAX_SKIP_P2ALIGN 1
+EOF
+
+ fi
+elif test x$gcc_cv_as != x; then
# Check if we have .balign and .p2align
echo ".balign 4" > conftest.s
echo ".p2align 2" >> conftest.s
echo "$ac_t""$gcc_cv_as_alignment_features" 1>&6
echo $ac_n "checking assembler subsection support""... $ac_c" 1>&6
-echo "configure:8817: checking assembler subsection support" >&5
+echo "configure:9120: checking assembler subsection support" >&5
gcc_cv_as_subsections=
-if test x$gcc_cv_as != x; then
+if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
+ if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 9 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
+ gcc_cv_as_subsections="working .subsection -1"
+ fi
+elif test x$gcc_cv_as != x; then
# Check if we have .subsection
echo ".subsection 1" > conftest.s
if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
gcc_cv_as_subsections=".subsection"
- if test -x nm$host_exeext; then
- gcc_cv_nm=./nm$host_exeext
- elif test x$host = x$target; then
- # Native build.
- gcc_cv_nm=nm$host_exeext
- fi
if test x$gcc_cv_nm != x; then
cat > conftest.s <<EOF
conftest_label1: .word 0
:
else
gcc_cv_as_subsections="working .subsection -1"
- cat >> confdefs.h <<\EOF
-#define HAVE_GAS_SUBSECTION_ORDERING 1
-EOF
-
fi
fi
fi
fi
rm -f conftest.s conftest.o conftest.nm1 conftest.nm2
+fi
+if test x"$gcc_cv_as_subsections" = x"working .subsection -1"; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_GAS_SUBSECTION_ORDERING 1
+EOF
+
fi
echo "$ac_t""$gcc_cv_as_subsections" 1>&6
echo $ac_n "checking assembler weak support""... $ac_c" 1>&6
-echo "configure:8857: checking assembler weak support" >&5
+echo "configure:9160: checking assembler weak support" >&5
gcc_cv_as_weak=
-if test x$gcc_cv_as != x; then
+if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
+ if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 2 -o "$gcc_cv_gas_major_version" -gt 2; then
+ gcc_cv_as_weak="yes"
+ fi
+elif test x$gcc_cv_as != x; then
# Check if we have .weak
echo " .weak foobar" > conftest.s
if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
- cat >> confdefs.h <<\EOF
+ gcc_cv_as_weak="yes"
+ fi
+ rm -f conftest.s conftest.o conftest.nm1 conftest.nm2
+fi
+if test x"$gcc_cv_as_weak" = xyes; then
+ cat >> confdefs.h <<\EOF
#define HAVE_GAS_WEAK 1
EOF
- gcc_cv_as_weak="yes"
+fi
+echo "$ac_t""$gcc_cv_as_weak" 1>&6
+
+echo $ac_n "checking assembler hidden support""... $ac_c" 1>&6
+echo "configure:9183: checking assembler hidden support" >&5
+gcc_cv_as_hidden=
+if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
+ if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 10 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
+ gcc_cv_as_hidden="yes"
+ fi
+elif test x$gcc_cv_as != x; then
+ # Check if we have .hidden
+ echo " .hidden foobar" > conftest.s
+ echo "foobar:" >> conftest.s
+ if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
+ gcc_cv_as_hidden="yes"
fi
rm -f conftest.s conftest.o conftest.nm1 conftest.nm2
fi
-echo "$ac_t""$gcc_cv_as_weak" 1>&6
+if test x"$gcc_cv_as_hidden" = xyes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_GAS_HIDDEN 1
+EOF
+
+fi
+echo "$ac_t""$gcc_cv_as_hidden" 1>&6
case "$target" in
sparc*-*-*)
echo $ac_n "checking assembler .register pseudo-op support""... $ac_c" 1>&6
-echo "configure:8876: checking assembler .register pseudo-op support" >&5
+echo "configure:9209: checking assembler .register pseudo-op support" >&5
if eval "test \"`echo '$''{'gcc_cv_as_register_pseudo_op'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
+ echo $ac_n "checking assembler supports -relax""... $ac_c" 1>&6
+echo "configure:9237: checking assembler supports -relax" >&5
+if eval "test \"`echo '$''{'gcc_cv_as_relax_opt'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ gcc_cv_as_relax_opt=unknown
+ if test x$gcc_cv_as != x; then
+ # Check if gas supports -relax
+ echo ".text" > conftest.s
+ if $gcc_cv_as -relax -o conftest.o conftest.s > /dev/null 2>&1; then
+ gcc_cv_as_relax_opt=yes
+ else
+ gcc_cv_as_relax_opt=no
+ fi
+ rm -f conftest.s conftest.o
+ fi
+
+fi
+
+echo "$ac_t""$gcc_cv_as_relax_opt" 1>&6
+ if test "x$gcc_cv_as_relax_opt" = xyes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_AS_RELAX_OPTION 1
+EOF
+
+ fi
+
case "$tm_file" in
*64*)
echo $ac_n "checking for 64 bit support in assembler ($gcc_cv_as)""... $ac_c" 1>&6
-echo "configure:8906: checking for 64 bit support in assembler ($gcc_cv_as)" >&5
+echo "configure:9267: checking for 64 bit support in assembler ($gcc_cv_as)" >&5
if eval "test \"`echo '$''{'gcc_cv_as_flags64'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "x$gcc_cv_as_flags64" != xno; then
echo $ac_n "checking for assembler offsetable %lo() support""... $ac_c" 1>&6
-echo "configure:8951: checking for assembler offsetable %lo() support" >&5
+echo "configure:9312: checking for assembler offsetable %lo() support" >&5
if eval "test \"`echo '$''{'gcc_cv_as_offsetable_lo10'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
i[34567]86-*-*)
echo $ac_n "checking assembler instructions""... $ac_c" 1>&6
-echo "configure:8990: checking assembler instructions" >&5
+echo "configure:9351: checking assembler instructions" >&5
gcc_cv_as_instructions=
- if test x$gcc_cv_as != x; then
+ if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
+ if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 9 -o "$gcc_cv_gas_major_version" -gt 2; then
+ gcc_cv_as_instructions="filds fists"
+ fi
+ elif test x$gcc_cv_as != x; then
set "filds fists" "filds mem; fists mem"
while test $# -gt 0
do
echo "$2" > conftest.s
if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
gcc_cv_as_instructions=${gcc_cv_as_instructions}$1" "
- cat >> confdefs.h <<EOF
-#define HAVE_GAS_`echo "$1" | tr 'a-z ' 'A-Z_'` 1
-EOF
-
fi
shift 2
done
rm -f conftest.s conftest.o
fi
+ if test x"$gcc_cv_as_instructions" != x; then
+ cat >> confdefs.h <<EOF
+#define HAVE_GAS_`echo "$gcc_cv_as_instructions" | tr 'a-z ' 'A-Z_'` 1
+EOF
+
+ fi
echo "$ac_t""$gcc_cv_as_instructions" 1>&6
;;
esac
else
enable_languages=all
fi
+else
+ if test x"${enable_languages}" = x; then
+ { echo "configure: error: --enable-languages needs at least one argument" 1>&2; exit 1; }
+ fi
fi
subdirs=
for lang in ${srcdir}/*/config-lang.in ..
echo "$lang doesn't set \$language." 1>&2
exit 1
fi
- if test x"${enable_languages}" = xall; then
+ if test x"${enable_languages}" = xall && test x"${lang_alias}" != xCHILL; then
add_this_lang=yes
else
case "${enable_languages}" in
echo "Using $GGC for garbage collection."
+# Use the system's zlib library.
+zlibdir=-L../../zlib
+zlibinc="-I\$(srcdir)/../../zlib"
+# Check whether --with-system-zlib or --without-system-zlib was given.
+if test "${with_system_zlib+set}" = set; then
+ withval="$with_system_zlib"
+ zlibdir=
+zlibinc=
+
+fi
+
+
+
+
# Build a new-abi (c++) system
# Check whether --enable-new-gxx-abi or --disable-new-gxx-abi was given.
if test "${enable_new_gxx_abi+set}" = set; then
+# Build a new-libstdc++ system (ie libstdc++-v3)
+echo $ac_n "checking for libstdc++ to install""... $ac_c" 1>&6
+echo "configure:9501: checking for libstdc++ to install" >&5
+# Check whether --enable-libstdcxx-v3 or --disable-libstdcxx-v3 was given.
+if test "${enable_libstdcxx_v3+set}" = set; then
+ enableval="$enable_libstdcxx_v3"
+ enable_libstdcxx_v3="$enableval"
+else
+ enable_libstdcxx_v3=no
+fi
+
+
+if test x$enable_libstdcxx_v3 = xyes; then
+ echo "$ac_t""v3" 1>&6
+ ac_esn=1
+else
+ echo "$ac_t""v2" 1>&6
+ ac_esn=0
+fi
+cat >> confdefs.h <<EOF
+#define ENABLE_STD_NAMESPACE $ac_esn
+EOF
+
+
+
+echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
+echo "configure:9525: checking whether to enable maintainer-specific portions of Makefiles" >&5
+ # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then
+ enableval="$enable_maintainer_mode"
+ maintainer_mode=$enableval
+else
+ maintainer_mode=no
+fi
+
+
+echo "$ac_t""$maintainer_mode" 1>&6
+
+if test "$maintainer_mode" = "yes"; then
+ MAINT=''
+else
+ MAINT='#'
+fi
+
# Make empty files to contain the specs and options for each language.
# Then add #include lines to for a compiler that has specs and/or options.
all_compilers=
all_stagestuff=
all_diff_excludes=
-all_outputs='Makefile intl/Makefile po/Makefile.in fixinc/Makefile gccbug'
+all_outputs='Makefile intl/Makefile po/Makefile.in fixinc/Makefile gccbug mklibgcc'
# List of language makefile fragments.
all_lang_makefiles=
all_headers=
-# If this is using newlib, then define inhibit_libc in
-# LIBGCC2_CFLAGS. This will cause __eprintf to be left out of
-# libgcc.a, but that's OK because newib should have its own version of
-# assert.h.
-inhibit_libc=
-if test x$with_newlib = xyes; then
- inhibit_libc=-Dinhibit_libc
-fi
-
-
# If $(exec_prefix) exists and is not the same as $(prefix), then compute an
# absolute path for gcc_tooldir based on inserting the number of up-directory
# movements required to get from $(exec_prefix) to $(prefix) into the basic
-
# Echo that links are built
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
+s%@enable_shared@%$enable_shared%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
s%@build_vendor@%$build_vendor%g
s%@build_os@%$build_os%g
s%@CC@%$CC%g
+s%@NO_MINUS_C_MINUS_O@%$NO_MINUS_C_MINUS_O%g
s%@stage1_warn_cflags@%$stage1_warn_cflags%g
+s%@stage2_warn_cflags@%$stage2_warn_cflags%g
s%@SET_MAKE@%$SET_MAKE%g
s%@AWK@%$AWK%g
s%@LEX@%$LEX%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@CPP@%$CPP%g
s%@gnat@%$gnat%g
+s%@MAKEINFO@%$MAKEINFO%g
+s%@BUILD_INFO@%$BUILD_INFO%g
+s%@INSTALL_INFO@%$INSTALL_INFO%g
+s%@TARGET_GETGROUPS_T@%$TARGET_GETGROUPS_T%g
s%@vfprintf@%$vfprintf%g
s%@doprint@%$doprint%g
s%@manext@%$manext%g
s%@GT_YES@%$GT_YES%g
s%@MKINSTALLDIRS@%$MKINSTALLDIRS%g
s%@l@%$l%g
+s%@inhibit_libc@%$inhibit_libc%g
s%@gthread_flags@%$gthread_flags%g
s%@GGC@%$GGC%g
+s%@zlibdir@%$zlibdir%g
+s%@zlibinc@%$zlibinc%g
s%@GXX_ABI_FLAG@%$GXX_ABI_FLAG%g
+s%@MAINT@%$MAINT%g
s%@build_canonical@%$build_canonical%g
s%@host_canonical@%$host_canonical%g
s%@target_subdir@%$target_subdir%g
-s%@inhibit_libc@%$inhibit_libc%g
s%@gcc_tooldir@%$gcc_tooldir%g
s%@dollar@%$dollar%g
s%@objdir@%$objdir%g
s%@cc_set_by_configure@%$cc_set_by_configure%g
s%@quoted_cc_set_by_configure@%$quoted_cc_set_by_configure%g
s%@cpp_install_dir@%$cpp_install_dir%g
-s%@cpp_main@%$cpp_main%g
s%@dep_host_xmake_file@%$dep_host_xmake_file%g
s%@dep_tmake_file@%$dep_tmake_file%g
s%@extra_c_flags@%$extra_c_flags%g
projects / gcc.git / blobdiff