--with-elf arrange to use ELF instead of host debug format."
ac_help="$ac_help
--with-local-prefix=DIR specifies directory to put local include."
-ac_help="$ac_help
- --enable-libstdcxx-v3
- enable libstdc++-v3 for building and installation"
ac_help="$ac_help
--with-gxx-include-dir=DIR
specifies directory to put g++ header files."
+ac_help="$ac_help
+ --enable-multilib enable library support for multiple ABIs"
ac_help="$ac_help
--enable-checking[=LIST]
enable expensive run-time checks. With LIST,
with the compiler."
ac_help="$ac_help
--with-system-zlib use installed libz"
-ac_help="$ac_help
- --enable-new-gxx-abi
- select the new abi for g++. You must select an ABI
- at configuration time, so that the correct runtime
- support is built. You cannot mix ABIs."
ac_help="$ac_help
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer"
# - two terminals occur directly after each other
# - the path contains an element with a dot in it
echo $ac_n "checking LIBRARY_PATH variable""... $ac_c" 1>&6
-echo "configure:619: checking LIBRARY_PATH variable" >&5
+echo "configure:613: checking LIBRARY_PATH variable" >&5
case ${LIBRARY_PATH} in
[:\;]* | *[:\;] | *[:\;][:\;]* | *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
library_path_setting="contains current directory"
# - two terminals occur directly after each other
# - the path contains an element with a dot in it
echo $ac_n "checking GCC_EXEC_PREFIX variable""... $ac_c" 1>&6
-echo "configure:644: checking GCC_EXEC_PREFIX variable" >&5
+echo "configure:638: checking GCC_EXEC_PREFIX variable" >&5
case ${GCC_EXEC_PREFIX} in
[:\;]* | *[:\;] | *[:\;][:\;]* | *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
gcc_exec_prefix_setting="contains current directory"
local_prefix=/usr/local
fi
-# Build a new-libstdc++ system (ie libstdc++-v3)
-echo $ac_n "checking for libstdc++ to install""... $ac_c" 1>&6
-echo "configure:760: checking for libstdc++ to install" >&5
-# Check whether --enable-libstdcxx-v3 or --disable-libstdcxx-v3 was given.
-if test "${enable_libstdcxx_v3+set}" = set; then
- enableval="$enable_libstdcxx_v3"
- enable_libstdcxx_v3="$enableval"
-else
- enable_libstdcxx_v3=yes
-fi
-
-
-if test x$enable_libstdcxx_v3 = xyes; then
- echo "$ac_t""v3" 1>&6
- HAVE_LIBSTDCXX_V3=1
- ac_esn=1
-else
- echo "$ac_t""v2" 1>&6
- HAVE_LIBSTDCXX_V3=0
- ac_esn=0
-fi
-
# Don't set gcc_gxx_include_dir to gxx_include_dir since that's only
# passed in by the toplevel make and thus we'd get different behavior
# depending on where we built the sources.
fi
fi
+# Determine whether or not multilibs are enabled.
+# Check whether --enable-multilib or --disable-multilib was given.
+if test "${enable_multilib+set}" = set; then
+ enableval="$enable_multilib"
+ :
+else
+ enable_multilib=yes
+fi
+
+
+
# Enable expensive internal checks
# Check whether --enable-checking or --disable-checking was given.
if test "${enable_checking+set}" = set; then
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:1017: checking host system type" >&5
+echo "configure:1000: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:1038: checking target system type" >&5
+echo "configure:1021: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1056: checking build system type" >&5
+echo "configure:1039: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1083: checking for $ac_word" >&5
+echo "configure:1066: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1113: checking for $ac_word" >&5
+echo "configure:1096: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1164: checking for $ac_word" >&5
+echo "configure:1147: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1196: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1179: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1207 "configure"
+#line 1190 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1212: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1195: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1238: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1221: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1243: checking whether we are using GNU C" >&5
+echo "configure:1226: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1252: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1235: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1271: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1254: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "x$CC" != xcc; then
echo $ac_n "checking whether $CC and cc understand -c and -o together""... $ac_c" 1>&6
-echo "configure:1304: checking whether $CC and cc understand -c and -o together" >&5
+echo "configure:1287: checking whether $CC and cc understand -c and -o together" >&5
else
echo $ac_n "checking whether cc understands -c and -o together""... $ac_c" 1>&6
-echo "configure:1307: checking whether cc understands -c and -o together" >&5
+echo "configure:1290: checking whether cc understands -c and -o together" >&5
fi
set dummy $CC; ac_cc="`echo $2 |
sed -e 's/[^a-zA-Z0-9_]/_/g' -e 's/^[0-9]/_/'`"
# We do the test twice because some compilers refuse to overwrite an
# existing .o file with -o, though they will create one.
ac_try='${CC-cc} -c conftest.c -o conftest.o 1>&5'
-if { (eval echo configure:1319: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
- test -f conftest.o && { (eval echo configure:1320: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
+if { (eval echo configure:1302: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
+ test -f conftest.o && { (eval echo configure:1303: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
then
eval ac_cv_prog_cc_${ac_cc}_c_o=yes
if test "x$CC" != xcc; then
# Test first that cc exists at all.
- if { ac_try='cc -c conftest.c 1>&5'; { (eval echo configure:1325: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
+ if { ac_try='cc -c conftest.c 1>&5'; { (eval echo configure:1308: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
ac_try='cc -c conftest.c -o conftest.o 1>&5'
- if { (eval echo configure:1327: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
- test -f conftest.o && { (eval echo configure:1328: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
+ if { (eval echo configure:1310: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
+ test -f conftest.o && { (eval echo configure:1311: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
then
# cc works too.
:
echo $ac_n "checking for long double""... $ac_c" 1>&6
-echo "configure:1364: checking for long double" >&5
+echo "configure:1347: checking for long double" >&5
if eval "test \"`echo '$''{'gcc_cv_c_long_double'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gcc_cv_c_long_double=yes
else
cat > conftest.$ac_ext <<EOF
-#line 1372 "configure"
+#line 1355 "configure"
#include "confdefs.h"
int main() {
switch (0) case 0: case (sizeof(long double) >= sizeof(double)):;
; return 0; }
EOF
-if { (eval echo configure:1382: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1365: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_c_long_double=yes
else
echo $ac_n "checking whether ${CC-cc} accepts -Wno-long-long""... $ac_c" 1>&6
-echo "configure:1405: checking whether ${CC-cc} accepts -Wno-long-long" >&5
+echo "configure:1388: checking whether ${CC-cc} accepts -Wno-long-long" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_no_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
save_CFLAGS="$CFLAGS"
CFLAGS="-Wno-long-long"
cat > conftest.$ac_ext <<EOF
-#line 1412 "configure"
+#line 1395 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:1419: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1402: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_prog_cc_no_long_long=yes
else
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:1463: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:1446: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
echo $ac_n "checking whether a default assembler was specified""... $ac_c" 1>&6
-echo "configure:1491: checking whether a default assembler was specified" >&5
+echo "configure:1474: checking whether a default assembler was specified" >&5
if test x"${DEFAULT_ASSEMBLER+set}" = x"set"; then
if test x"$gas_flag" = x"no"; then
echo "$ac_t""yes ($DEFAULT_ASSEMBLER)" 1>&6
fi
echo $ac_n "checking whether a default linker was specified""... $ac_c" 1>&6
-echo "configure:1503: checking whether a default linker was specified" >&5
+echo "configure:1486: checking whether a default linker was specified" >&5
if test x"${DEFAULT_LINKER+set}" = x"set"; then
if test x"$gnu_ld_flag" = x"no"; then
echo "$ac_t""yes ($DEFAULT_LINKER)" 1>&6
fi
echo $ac_n "checking for GNU C library""... $ac_c" 1>&6
-echo "configure:1515: checking for GNU C library" >&5
+echo "configure:1498: checking for GNU C library" >&5
if eval "test \"`echo '$''{'gcc_cv_glibc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1520 "configure"
+#line 1503 "configure"
#include "confdefs.h"
#include <features.h>
int main() {
#endif
; return 0; }
EOF
-if { (eval echo configure:1530: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1513: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_glibc=yes
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:1551: checking for inline" >&5
+echo "configure:1534: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 1558 "configure"
+#line 1541 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:1565: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1548: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1597: checking for $ac_word" >&5
+echo "configure:1580: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
done
echo $ac_n "checking whether ln works""... $ac_c" 1>&6
-echo "configure:1627: checking whether ln works" >&5
+echo "configure:1610: checking whether ln works" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_LN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1659: checking whether ln -s works" >&5
+echo "configure:1642: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking for volatile""... $ac_c" 1>&6
-echo "configure:1691: checking for volatile" >&5
+echo "configure:1674: checking for volatile" >&5
if eval "test \"`echo '$''{'gcc_cv_c_volatile'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1696 "configure"
+#line 1679 "configure"
#include "confdefs.h"
int main() {
volatile int foo;
; return 0; }
EOF
-if { (eval echo configure:1703: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1686: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_c_volatile=yes
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1726: checking for $ac_word" >&5
+echo "configure:1709: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1764: checking for a BSD compatible install" >&5
+echo "configure:1747: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1815: checking how to run the C preprocessor" >&5
+echo "configure:1798: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1830 "configure"
+#line 1813 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1836: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1819: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1847 "configure"
+#line 1830 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1853: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1836: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 1864 "configure"
+#line 1847 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1870: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1853: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
echo "$ac_t""$CPP" 1>&6
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:1895: checking for ANSI C header files" >&5
+echo "configure:1878: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1900 "configure"
+#line 1883 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1908: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1891: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1925 "configure"
+#line 1908 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1943 "configure"
+#line 1926 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 1964 "configure"
+#line 1947 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:1975: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1958: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:1999: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:1982: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2004 "configure"
+#line 1987 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
struct tm *tp;
; return 0; }
EOF
-if { (eval echo configure:2013: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1996: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time=yes
else
fi
echo $ac_n "checking whether string.h and strings.h may both be included""... $ac_c" 1>&6
-echo "configure:2034: checking whether string.h and strings.h may both be included" >&5
+echo "configure:2017: checking whether string.h and strings.h may both be included" >&5
if eval "test \"`echo '$''{'gcc_cv_header_string'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2039 "configure"
+#line 2022 "configure"
#include "confdefs.h"
#include <string.h>
#include <strings.h>
; return 0; }
EOF
-if { (eval echo configure:2047: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2030: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_header_string=yes
else
fi
echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:2068: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo "configure:2051: checking for sys/wait.h that is POSIX.1 compatible" >&5
if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2073 "configure"
+#line 2056 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/wait.h>
s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
; return 0; }
EOF
-if { (eval echo configure:2089: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2072: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_sys_wait_h=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2116: checking for $ac_hdr" >&5
+echo "configure:2099: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2121 "configure"
+#line 2104 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2126: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2109: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
# Check for thread headers.
ac_safe=`echo "thread.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for thread.h""... $ac_c" 1>&6
-echo "configure:2156: checking for thread.h" >&5
+echo "configure:2139: checking for thread.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2161 "configure"
+#line 2144 "configure"
#include "confdefs.h"
#include <thread.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2166: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2149: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
ac_safe=`echo "pthread.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for pthread.h""... $ac_c" 1>&6
-echo "configure:2190: checking for pthread.h" >&5
+echo "configure:2173: checking for pthread.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2195 "configure"
+#line 2178 "configure"
#include "confdefs.h"
#include <pthread.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2200: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2183: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
# Extract the first word of "gnatbind", so it can be a program name with args.
set dummy gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2227: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gnat'+set}'`\" = set"; then
+echo "configure:2210: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_have_gnat'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$gnat"; then
- ac_cv_prog_gnat="$gnat" # Let the user override the test.
+ if test -n "$have_gnat"; then
+ ac_cv_prog_have_gnat="$have_gnat" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_gnat="yes"
+ ac_cv_prog_have_gnat="yes"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_gnat" && ac_cv_prog_gnat="no"
+ test -z "$ac_cv_prog_have_gnat" && ac_cv_prog_have_gnat="no"
fi
fi
-gnat="$ac_cv_prog_gnat"
-if test -n "$gnat"; then
- echo "$ac_t""$gnat" 1>&6
+have_gnat="$ac_cv_prog_have_gnat"
+if test -n "$have_gnat"; then
+ echo "$ac_t""$have_gnat" 1>&6
else
echo "$ac_t""no" 1>&6
fi
# Extract the first word of "mktemp", so it can be a program name with args.
set dummy mktemp; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2259: checking for $ac_word" >&5
+echo "configure:2242: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_have_mktemp_command'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "makeinfo", so it can be a program name with args.
set dummy makeinfo; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2298: checking for $ac_word" >&5
+echo "configure:2281: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$MAKEINFO"; then
# Found it, now check the version.
echo $ac_n "checking for modern makeinfo""... $ac_c" 1>&6
-echo "configure:2327: checking for modern makeinfo" >&5
+echo "configure:2310: checking for modern makeinfo" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_makeinfo_modern'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_prog_version=`$MAKEINFO --version 2>&1 |
sed -n 's/^.*GNU texinfo.* \([0-9][0-9.]*\).*$/\1/p'`
- echo "configure:2333: version of makeinfo is $ac_prog_version" >&5
+ echo "configure:2316: version of makeinfo is $ac_prog_version" >&5
case $ac_prog_version in
'') gcc_cv_prog_makeinfo_modern=no;;
4.*)
# Is pod2man recent enough to regenerate manpages?
echo $ac_n "checking for recent Pod::Man""... $ac_c" 1>&6
-echo "configure:2361: checking for recent Pod::Man" >&5
+echo "configure:2344: checking for recent Pod::Man" >&5
if perl -e 'use 1.10 Pod::Man' >/dev/null 2>&1; then
echo "$ac_t""yes" 1>&6
GENERATED_MANPAGES=generated-manpages
# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2377: checking for $ac_word" >&5
+echo "configure:2360: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "bison", so it can be a program name with args.
set dummy bison; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2414: checking for $ac_word" >&5
+echo "configure:2397: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for preprocessor stringizing operator""... $ac_c" 1>&6
-echo "configure:2448: checking for preprocessor stringizing operator" >&5
+echo "configure:2431: checking for preprocessor stringizing operator" >&5
if eval "test \"`echo '$''{'ac_cv_c_stringize'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2453 "configure"
+#line 2436 "configure"
#include "confdefs.h"
#define x(y) #y
# Use <inttypes.h> only if it exists,
# doesn't clash with <sys/types.h>, and declares intmax_t.
echo $ac_n "checking for inttypes.h""... $ac_c" 1>&6
-echo "configure:2486: checking for inttypes.h" >&5
+echo "configure:2469: checking for inttypes.h" >&5
if eval "test \"`echo '$''{'gcc_cv_header_inttypes_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2491 "configure"
+#line 2474 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <inttypes.h>
intmax_t i = -1;
; return 0; }
EOF
-if { (eval echo configure:2499: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2482: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_header_inttypes_h=yes
else
# be either signed or unsigned.
#
echo $ac_n "checking for unsigned enumerated bitfields""... $ac_c" 1>&6
-echo "configure:2524: checking for unsigned enumerated bitfields" >&5
+echo "configure:2507: checking for unsigned enumerated bitfields" >&5
if eval "test \"`echo '$''{'gcc_cv_enum_bf_unsigned'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gcc_cv_enum_bf_unsigned=yes
else
cat > conftest.$ac_ext <<EOF
-#line 2532 "configure"
+#line 2515 "configure"
#include "confdefs.h"
#include <stdlib.h>
enum t { BLAH = 128 } ;
}
EOF
-if { (eval echo configure:2545: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2528: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
gcc_cv_enum_bf_unsigned=yes
else
fputs_unlocked getrusage iconv nl_langinfo
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2573: checking for $ac_func" >&5
+echo "configure:2556: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2578 "configure"
+#line 2561 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2601: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2584: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking for ssize_t""... $ac_c" 1>&6
-echo "configure:2627: checking for ssize_t" >&5
+echo "configure:2610: checking for ssize_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_ssize_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2632 "configure"
+#line 2615 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
# Try to determine the array type of the second argument of getgroups
# for the target system (int or gid_t).
echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
-echo "configure:2663: checking for uid_t in sys/types.h" >&5
+echo "configure:2646: checking for uid_t in sys/types.h" >&5
if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2668 "configure"
+#line 2651 "configure"
#include "confdefs.h"
#include <sys/types.h>
EOF
fi
echo $ac_n "checking type of array argument to getgroups""... $ac_c" 1>&6
-echo "configure:2697: checking type of array argument to getgroups" >&5
+echo "configure:2680: checking type of array argument to getgroups" >&5
if eval "test \"`echo '$''{'ac_cv_type_getgroups'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_type_getgroups=cross
else
cat > conftest.$ac_ext <<EOF
-#line 2705 "configure"
+#line 2688 "configure"
#include "confdefs.h"
/* Thanks to Mike Rendell for this test. */
}
EOF
-if { (eval echo configure:2730: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2713: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_type_getgroups=gid_t
else
if test $ac_cv_type_getgroups = cross; then
cat > conftest.$ac_ext <<EOF
-#line 2744 "configure"
+#line 2727 "configure"
#include "confdefs.h"
#include <unistd.h>
EOF
echo $ac_n "checking for vprintf""... $ac_c" 1>&6
-echo "configure:2785: checking for vprintf" >&5
+echo "configure:2768: checking for vprintf" >&5
if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2790 "configure"
+#line 2773 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vprintf(); below. */
; return 0; }
EOF
-if { (eval echo configure:2813: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2796: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_vprintf=yes"
else
if test "$ac_cv_func_vprintf" != yes; then
echo $ac_n "checking for _doprnt""... $ac_c" 1>&6
-echo "configure:2837: checking for _doprnt" >&5
+echo "configure:2820: checking for _doprnt" >&5
if eval "test \"`echo '$''{'ac_cv_func__doprnt'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2842 "configure"
+#line 2825 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char _doprnt(); below. */
; return 0; }
EOF
-if { (eval echo configure:2865: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2848: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func__doprnt=yes"
else
for ac_func in strstr
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2903: checking for $ac_func" >&5
+echo "configure:2886: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2908 "configure"
+#line 2891 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2931: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2914: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking whether the printf functions support %p""... $ac_c" 1>&6
-echo "configure:2958: checking whether the printf functions support %p" >&5
+echo "configure:2941: checking whether the printf functions support %p" >&5
if eval "test \"`echo '$''{'gcc_cv_func_printf_ptr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gcc_cv_func_printf_ptr=no
else
cat > conftest.$ac_ext <<EOF
-#line 2966 "configure"
+#line 2949 "configure"
#include "confdefs.h"
#include <stdio.h>
return (p != q);
}
EOF
-if { (eval echo configure:2979: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2962: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
gcc_cv_func_printf_ptr=yes
else
;;
esac
echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:3011: checking for pid_t" >&5
+echo "configure:2994: checking for pid_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3016 "configure"
+#line 2999 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
ac_safe=`echo "vfork.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for vfork.h""... $ac_c" 1>&6
-echo "configure:3045: checking for vfork.h" >&5
+echo "configure:3028: checking for vfork.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3050 "configure"
+#line 3033 "configure"
#include "confdefs.h"
#include <vfork.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3055: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3038: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
echo $ac_n "checking for working vfork""... $ac_c" 1>&6
-echo "configure:3080: checking for working vfork" >&5
+echo "configure:3063: checking for working vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
echo $ac_n "checking for vfork""... $ac_c" 1>&6
-echo "configure:3086: checking for vfork" >&5
+echo "configure:3069: checking for vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3091 "configure"
+#line 3074 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vfork(); below. */
; return 0; }
EOF
-if { (eval echo configure:3114: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3097: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_vfork=yes"
else
ac_cv_func_vfork_works=$ac_cv_func_vfork
else
cat > conftest.$ac_ext <<EOF
-#line 3136 "configure"
+#line 3119 "configure"
#include "confdefs.h"
/* Thanks to Paul Eggert for this test. */
#include <stdio.h>
}
}
EOF
-if { (eval echo configure:3231: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3214: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_vfork_works=yes
else
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3256: checking for $ac_func" >&5
+echo "configure:3239: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3261 "configure"
+#line 3244 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3284: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3267: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
EOF
echo $ac_n "checking for working mmap from /dev/zero""... $ac_c" 1>&6
-echo "configure:3555: checking for working mmap from /dev/zero" >&5
+echo "configure:3538: checking for working mmap from /dev/zero" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_dev_zero'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
esac
else
cat > conftest.$ac_ext <<EOF
-#line 3571 "configure"
+#line 3554 "configure"
#include "confdefs.h"
#include "ct-mmap.inc"
EOF
-if { (eval echo configure:3575: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3558: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_dev_zero=yes
else
fi
echo $ac_n "checking for working mmap with MAP_ANON(YMOUS)""... $ac_c" 1>&6
-echo "configure:3602: checking for working mmap with MAP_ANON(YMOUS)" >&5
+echo "configure:3585: checking for working mmap with MAP_ANON(YMOUS)" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_anon'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_mmap_anon=no
else
cat > conftest.$ac_ext <<EOF
-#line 3612 "configure"
+#line 3595 "configure"
#include "confdefs.h"
#define USE_MAP_ANON
#include "ct-mmap.inc"
EOF
-if { (eval echo configure:3617: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3600: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_anon=yes
else
rm -f ct-mmap.inc
echo $ac_n "checking for working mmap of a file""... $ac_c" 1>&6
-echo "configure:3645: checking for working mmap of a file" >&5
+echo "configure:3628: checking for working mmap of a file" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_file'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_mmap_file=no
else
cat > conftest.$ac_ext <<EOF
-#line 3660 "configure"
+#line 3643 "configure"
#include "confdefs.h"
/* Test by Zack Weinberg. Modified from MMAP_ANYWHERE test by
exit(0);
}
EOF
-if { (eval echo configure:3697: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3680: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_file=yes
else
do
ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
-echo "configure:3730: checking whether $ac_func is declared" >&5
+echo "configure:3713: checking whether $ac_func is declared" >&5
if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3735 "configure"
+#line 3718 "configure"
#include "confdefs.h"
#include "gansidecl.h"
#include "system.h"
#endif
; return 0; }
EOF
-if { (eval echo configure:3746: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3729: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "gcc_cv_have_decl_$ac_func=yes"
else
do
ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
-echo "configure:3839: checking whether $ac_func is declared" >&5
+echo "configure:3822: checking whether $ac_func is declared" >&5
if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3844 "configure"
+#line 3827 "configure"
#include "confdefs.h"
#include "gansidecl.h"
#include "system.h"
#endif
; return 0; }
EOF
-if { (eval echo configure:3859: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3842: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "gcc_cv_have_decl_$ac_func=yes"
else
# mkdir takes a single argument on some systems.
echo $ac_n "checking if mkdir takes one argument""... $ac_c" 1>&6
-echo "configure:3902: checking if mkdir takes one argument" >&5
+echo "configure:3885: checking if mkdir takes one argument" >&5
if eval "test \"`echo '$''{'gcc_cv_mkdir_takes_one_arg'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3907 "configure"
+#line 3890 "configure"
#include "confdefs.h"
#include <sys/types.h>
mkdir ("foo", 0);
; return 0; }
EOF
-if { (eval echo configure:3924: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3907: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_mkdir_takes_one_arg=no
else
# auto-host.h is the file containing items generated by autoconf and is
# the first file included by config.h.
null_defines=
-host_xm_file="auto-host.h gansidecl.h ${host_xm_file} hwint.h"
+host_xm_file="auto-host.h gansidecl.h ${host_xm_file} defaults.h hwint.h"
# If host=build, it is correct to have hconfig include auto-host.h
# as well. If host!=build, we are in error and need to do more
# work to find out the build config parameters.
if test x$host = x$build
then
- build_xm_file="auto-host.h gansidecl.h ${build_xm_file} hwint.h"
+ build_xm_file="auto-host.h gansidecl.h ${build_xm_file} defaults.h hwint.h"
else
# We create a subdir, then run autoconf in the subdir.
# To prevent recursion we set host and build for the new
mv auto-host.h ../auto-build.h
cd ..
rm -rf $tempdir
- build_xm_file="auto-build.h gansidecl.h ${build_xm_file} hwint.h"
+ build_xm_file="auto-build.h gansidecl.h ${build_xm_file} defaults.h hwint.h"
fi
-xm_file="gansidecl.h ${xm_file}"
-tm_file="gansidecl.h ${tm_file}"
+xm_file="gansidecl.h ${xm_file} defaults.h"
+tm_file="gansidecl.h ${tm_file} defaults.h"
vars="host_xm_file tm_file tm_p_file xm_file build_xm_file"
links="config.h tm.h tm_p.h tconfig.h hconfig.h"
echo $ac_n "checking for strerror in -lcposix""... $ac_c" 1>&6
-echo "configure:4235: checking for strerror in -lcposix" >&5
+echo "configure:4218: checking for strerror in -lcposix" >&5
ac_lib_var=`echo cposix'_'strerror | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lcposix $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4243 "configure"
+#line 4226 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
strerror()
; return 0; }
EOF
-if { (eval echo configure:4254: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4237: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:4277: checking for working const" >&5
+echo "configure:4260: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4282 "configure"
+#line 4265 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:4331: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4314: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:4352: checking for off_t" >&5
+echo "configure:4335: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4357 "configure"
+#line 4340 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:4385: checking for size_t" >&5
+echo "configure:4368: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4390 "configure"
+#line 4373 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:4420: checking for working alloca.h" >&5
+echo "configure:4403: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4425 "configure"
+#line 4408 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:4432: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4415: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:4453: checking for alloca" >&5
+echo "configure:4436: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4458 "configure"
+#line 4441 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:4486: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4469: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:4518: checking whether alloca needs Cray hooks" >&5
+echo "configure:4501: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4523 "configure"
+#line 4506 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4548: checking for $ac_func" >&5
+echo "configure:4531: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4553 "configure"
+#line 4536 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4576: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4559: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:4603: checking stack direction for C alloca" >&5
+echo "configure:4586: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 4611 "configure"
+#line 4594 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:4630: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4613: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4657: checking for $ac_hdr" >&5
+echo "configure:4640: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4662 "configure"
+#line 4645 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4667: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4650: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
strdup __argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4697: checking for $ac_func" >&5
+echo "configure:4680: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4702 "configure"
+#line 4685 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4725: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4708: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in stpcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4754: checking for $ac_func" >&5
+echo "configure:4737: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4759 "configure"
+#line 4742 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4782: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4765: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:4816: checking for LC_MESSAGES" >&5
+echo "configure:4799: checking for LC_MESSAGES" >&5
if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4821 "configure"
+#line 4804 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
-if { (eval echo configure:4828: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4811: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
fi
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:4849: checking whether NLS is requested" >&5
+echo "configure:4832: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
EOF
echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:4869: checking whether included gettext is requested" >&5
+echo "configure:4852: checking whether included gettext is requested" >&5
# Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then
withval="$with_included_gettext"
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:4888: checking for libintl.h" >&5
+echo "configure:4871: checking for libintl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4893 "configure"
+#line 4876 "configure"
#include "confdefs.h"
#include <libintl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4898: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4881: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:4915: checking for gettext in libc" >&5
+echo "configure:4898: checking for gettext in libc" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4920 "configure"
+#line 4903 "configure"
#include "confdefs.h"
#include <libintl.h>
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:4927: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4910: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libc=yes
else
if test "$gt_cv_func_gettext_libc" != "yes"; then
echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:4943: checking for bindtextdomain in -lintl" >&5
+echo "configure:4926: checking for bindtextdomain in -lintl" >&5
ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4951 "configure"
+#line 4934 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
bindtextdomain()
; return 0; }
EOF
-if { (eval echo configure:4962: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4945: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:4978: checking for gettext in libintl" >&5
+echo "configure:4961: checking for gettext in libintl" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for gettext in -lintl""... $ac_c" 1>&6
-echo "configure:4983: checking for gettext in -lintl" >&5
+echo "configure:4966: checking for gettext in -lintl" >&5
ac_lib_var=`echo intl'_'gettext | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4991 "configure"
+#line 4974 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gettext()
; return 0; }
EOF
-if { (eval echo configure:5002: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4985: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
+ if test "$gt_cv_func_gettext_libintl" = "yes"; then
+ LIBS="-lintl $LIBS"
+ fi
+
if test "$gt_cv_func_gettext_libc" = "yes" \
|| test "$gt_cv_func_gettext_libintl" = "yes"; then
cat >> confdefs.h <<\EOF
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5041: checking for $ac_word" >&5
+echo "configure:5028: checking for $ac_word" >&5
if eval "test \"`echo '$''{'gcc_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_func in dcgettext
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5075: checking for $ac_func" >&5
+echo "configure:5062: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5080 "configure"
+#line 5067 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5103: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5090: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5130: checking for $ac_word" >&5
+echo "configure:5117: checking for $ac_word" >&5
if eval "test \"`echo '$''{'gcc_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5166: checking for $ac_word" >&5
+echo "configure:5153: checking for $ac_word" >&5
if eval "test \"`echo '$''{'gcc_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
cat > conftest.$ac_ext <<EOF
-#line 5198 "configure"
+#line 5185 "configure"
#include "confdefs.h"
int main() {
return _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:5206: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5193: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
CATOBJEXT=.gmo
DATADIRNAME=share
if test "$CATOBJEXT" = "NONE"; then
echo $ac_n "checking whether catgets can be used""... $ac_c" 1>&6
-echo "configure:5231: checking whether catgets can be used" >&5
+echo "configure:5218: checking whether catgets can be used" >&5
# Check whether --with-catgets or --without-catgets was given.
if test "${with_catgets+set}" = set; then
withval="$with_catgets"
if test "$nls_cv_use_catgets" = "yes"; then
echo $ac_n "checking for main in -li""... $ac_c" 1>&6
-echo "configure:5244: checking for main in -li" >&5
+echo "configure:5231: checking for main in -li" >&5
ac_lib_var=`echo i'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-li $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5252 "configure"
+#line 5239 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:5259: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5246: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for catgets""... $ac_c" 1>&6
-echo "configure:5287: checking for catgets" >&5
+echo "configure:5274: checking for catgets" >&5
if eval "test \"`echo '$''{'ac_cv_func_catgets'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5292 "configure"
+#line 5279 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char catgets(); below. */
; return 0; }
EOF
-if { (eval echo configure:5315: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5302: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_catgets=yes"
else
# Extract the first word of "gencat", so it can be a program name with args.
set dummy gencat; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5337: checking for $ac_word" >&5
+echo "configure:5324: checking for $ac_word" >&5
if eval "test \"`echo '$''{'gcc_cv_path_GENCAT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5373: checking for $ac_word" >&5
+echo "configure:5360: checking for $ac_word" >&5
if eval "test \"`echo '$''{'gcc_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5410: checking for $ac_word" >&5
+echo "configure:5397: checking for $ac_word" >&5
if eval "test \"`echo '$''{'gcc_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5448: checking for $ac_word" >&5
+echo "configure:5435: checking for $ac_word" >&5
if eval "test \"`echo '$''{'gcc_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5506: checking for $ac_word" >&5
+echo "configure:5493: checking for $ac_word" >&5
if eval "test \"`echo '$''{'gcc_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5540: checking for $ac_word" >&5
+echo "configure:5527: checking for $ac_word" >&5
if eval "test \"`echo '$''{'gcc_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5579: checking for $ac_word" >&5
+echo "configure:5566: checking for $ac_word" >&5
if eval "test \"`echo '$''{'gcc_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
LINGUAS=
else
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:5678: checking for catalogs to be installed" >&5
+echo "configure:5665: checking for catalogs to be installed" >&5
if test "x$LINGUAS" = "x"; then
LINGUAS=$ALL_LINGUAS
else
if test "$CATOBJEXT" = ".cat"; then
ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:5710: checking for linux/version.h" >&5
+echo "configure:5697: checking for linux/version.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5715 "configure"
+#line 5702 "configure"
#include "confdefs.h"
#include <linux/version.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5720: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5707: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking whether windows registry support is requested""... $ac_c" 1>&6
-echo "configure:5795: checking whether windows registry support is requested" >&5
+echo "configure:5782: checking whether windows registry support is requested" >&5
if test x$enable_win32_registry != xno; then
cat >> confdefs.h <<\EOF
#define ENABLE_WIN32_REGISTRY 1
if test x$enable_win32_registry != xno; then
echo $ac_n "checking registry key on windows hosts""... $ac_c" 1>&6
-echo "configure:5824: checking registry key on windows hosts" >&5
+echo "configure:5811: checking registry key on windows hosts" >&5
cat >> confdefs.h <<EOF
#define WIN32_REGISTRY_KEY "$gcc_cv_win32_registry_key"
EOF
tm_file_list=
for f in $tm_file; do
case $f in
- gansidecl.h )
+ gansidecl.h | defaults.h )
tm_file_list="${tm_file_list} $f" ;;
*) tm_file_list="${tm_file_list} \$(srcdir)/config/$f" ;;
esac
host_xm_file_list=
for f in $host_xm_file; do
case $f in
- auto-host.h | gansidecl.h | hwint.h )
+ auto-host.h | gansidecl.h | defaults.h | hwint.h )
host_xm_file_list="${host_xm_file_list} $f" ;;
*) host_xm_file_list="${host_xm_file_list} \$(srcdir)/config/$f" ;;
esac
build_xm_file_list=
for f in $build_xm_file; do
case $f in
- auto-build.h | auto-host.h | gansidecl.h | hwint.h )
+ auto-build.h | auto-host.h | gansidecl.h | defaults.h | hwint.h )
build_xm_file_list="${build_xm_file_list} $f" ;;
*) build_xm_file_list="${build_xm_file_list} \$(srcdir)/config/$f" ;;
esac
# Figure out what assembler we will be using.
echo $ac_n "checking what assembler to use""... $ac_c" 1>&6
-echo "configure:6004: checking what assembler to use" >&5
+echo "configure:5991: checking what assembler to use" >&5
gcc_cv_as=
gcc_cv_gas_major_version=
gcc_cv_gas_minor_version=
# Figure out what nm we will be using.
echo $ac_n "checking what nm to use""... $ac_c" 1>&6
-echo "configure:6089: checking what nm to use" >&5
+echo "configure:6076: checking what nm to use" >&5
if test -x nm$host_exeext; then
gcc_cv_nm=./nm$host_exeext
elif test x$host = x$target; then
# Figure out what assembler alignment features are present.
echo $ac_n "checking assembler alignment features""... $ac_c" 1>&6
-echo "configure:6100: checking assembler alignment features" >&5
+echo "configure:6087: checking assembler alignment features" >&5
gcc_cv_as_alignment_features=none
if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
# Gas version 2.6 and later support for .balign and .p2align.
echo "$ac_t""$gcc_cv_as_alignment_features" 1>&6
echo $ac_n "checking assembler subsection support""... $ac_c" 1>&6
-echo "configure:6148: checking assembler subsection support" >&5
+echo "configure:6135: checking assembler subsection support" >&5
gcc_cv_as_subsections=no
if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 9 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
echo "$ac_t""$gcc_cv_as_subsections" 1>&6
echo $ac_n "checking assembler weak support""... $ac_c" 1>&6
-echo "configure:6188: checking assembler weak support" >&5
+echo "configure:6175: checking assembler weak support" >&5
gcc_cv_as_weak=no
if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 2 -o "$gcc_cv_gas_major_version" -gt 2; then
echo "$ac_t""$gcc_cv_as_weak" 1>&6
echo $ac_n "checking assembler hidden support""... $ac_c" 1>&6
-echo "configure:6211: checking assembler hidden support" >&5
+echo "configure:6198: checking assembler hidden support" >&5
gcc_cv_as_hidden=no
if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 10 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
case "$target" in
sparc*-*-*)
echo $ac_n "checking assembler .register pseudo-op support""... $ac_c" 1>&6
-echo "configure:6237: checking assembler .register pseudo-op support" >&5
+echo "configure:6224: checking assembler .register pseudo-op support" >&5
if eval "test \"`echo '$''{'gcc_cv_as_register_pseudo_op'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking assembler supports -relax""... $ac_c" 1>&6
-echo "configure:6265: checking assembler supports -relax" >&5
+echo "configure:6252: checking assembler supports -relax" >&5
if eval "test \"`echo '$''{'gcc_cv_as_relax_opt'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$tm_file" in
*64*)
echo $ac_n "checking for 64 bit support in assembler ($gcc_cv_as)""... $ac_c" 1>&6
-echo "configure:6295: checking for 64 bit support in assembler ($gcc_cv_as)" >&5
+echo "configure:6282: checking for 64 bit support in assembler ($gcc_cv_as)" >&5
if eval "test \"`echo '$''{'gcc_cv_as_flags64'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "x$gcc_cv_as_flags64" != xno; then
echo $ac_n "checking for assembler offsetable %lo() support""... $ac_c" 1>&6
-echo "configure:6340: checking for assembler offsetable %lo() support" >&5
+echo "configure:6327: checking for assembler offsetable %lo() support" >&5
if eval "test \"`echo '$''{'gcc_cv_as_offsetable_lo10'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
i[34567]86-*-*)
echo $ac_n "checking assembler instructions""... $ac_c" 1>&6
-echo "configure:6379: checking assembler instructions" >&5
+echo "configure:6366: checking assembler instructions" >&5
gcc_cv_as_instructions=
if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 9 -o "$gcc_cv_gas_major_version" -gt 2; then
esac
echo $ac_n "checking assembler dwarf2 debug_line support""... $ac_c" 1>&6
-echo "configure:6408: checking assembler dwarf2 debug_line support" >&5
+echo "configure:6395: checking assembler dwarf2 debug_line support" >&5
gcc_cv_as_dwarf2_debug_line=no
# ??? Not all targets support dwarf2 debug_line, even within a version
# of gas. Moreover, we need to emit a valid instruction to trigger any
if test x"${add_this_lang}" = xyes; then
case $lang in
${srcdir}/ada/config-lang.in)
- if test x$gnat = xyes ; then
+ if test x$have_gnat = xyes ; then
subdirs="$subdirs `echo $lang | sed -e 's,^.*/\([^/]*\)/config-lang.in$,\1,'`"
fi
;;
-# Build a new-abi (c++) system
-# Check whether --enable-new-gxx-abi or --disable-new-gxx-abi was given.
-if test "${enable_new_gxx_abi+set}" = set; then
- enableval="$enable_new_gxx_abi"
- :
-else
- enable_new_gxx_abi=yes
-fi
-
-
-if test x$enable_new_gxx_abi = xyes; then
- cat >> confdefs.h <<\EOF
-#define ENABLE_NEW_GXX_ABI 1
-EOF
-
- GXX_ABI_FLAG='-fnew-abi'
-else
- GXX_ABI_FLAG=
-fi
-
-
cat >> confdefs.h <<EOF
-#define ENABLE_STD_NAMESPACE $ac_esn
+#define ENABLE_STD_NAMESPACE 1
EOF
-
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:6576: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:6541: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
fi
done
+check_languages=
+for language in .. $all_languages
+do
+ if test $language != ".."
+ then
+ check_languages="$check_languages check-$language"
+ fi
+done
+
# Since we can't use `::' targets, we link each language in
# with a set of hooks, reached indirectly via lang.${target}.
echo "lang.$t: $x" >> Make-hooks
done
-# If we're not building in srcdir, create .gdbinit.
+# Create .gdbinit.
-if test ! -f Makefile.in; then
- echo "dir ." > .gdbinit
- echo "dir ${srcdir}" >> .gdbinit
- if test x$gdb_needs_out_file_path = xyes
- then
- echo "dir ${srcdir}/config/"`dirname ${out_file}` >> .gdbinit
- fi
- if test "x$subdirs" != x; then
- for s in $subdirs
- do
- echo "dir ${srcdir}/$s" >> .gdbinit
- done
- fi
- echo "source ${srcdir}/.gdbinit" >> .gdbinit
+echo "dir ." > .gdbinit
+echo "dir ${srcdir}" >> .gdbinit
+if test x$gdb_needs_out_file_path = xyes
+then
+ echo "dir ${srcdir}/config/"`dirname ${out_file}` >> .gdbinit
+fi
+if test "x$subdirs" != x; then
+ for s in $subdirs
+ do
+ echo "dir ${srcdir}/$s" >> .gdbinit
+ done
fi
+echo "source ${srcdir}/gdbinit.in" >> .gdbinit
# Define variables host_canonical and build_canonical
# because some Cygnus local changes in the Makefile depend on them.
+
# Echo that links are built
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
+s%@enable_multilib@%$enable_multilib%g
s%@enable_shared@%$enable_shared%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@CPP@%$CPP%g
-s%@gnat@%$gnat%g
+s%@have_gnat@%$have_gnat%g
s%@have_mktemp_command@%$have_mktemp_command%g
s%@MAKEINFO@%$MAKEINFO%g
s%@BUILD_INFO@%$BUILD_INFO%g
s%@GGC@%$GGC%g
s%@zlibdir@%$zlibdir%g
s%@zlibinc@%$zlibinc%g
-s%@GXX_ABI_FLAG@%$GXX_ABI_FLAG%g
-s%@HAVE_LIBSTDCXX_V3@%$HAVE_LIBSTDCXX_V3%g
s%@MAINT@%$MAINT%g
s%@build_canonical@%$build_canonical%g
s%@host_canonical@%$host_canonical%g
s%@build_exeext@%$build_exeext%g
s%@build_install_headers_dir@%$build_install_headers_dir%g
s%@build_xm_file_list@%$build_xm_file_list%g
+s%@check_languages@%$check_languages%g
s%@cc_set_by_configure@%$cc_set_by_configure%g
s%@quoted_cc_set_by_configure@%$quoted_cc_set_by_configure%g
s%@cpp_install_dir@%$cpp_install_dir%g