/* Allocation for dataflow support routines.
- Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
- Free Software Foundation, Inc.
- Originally contributed by Michael P. Hayes
+ Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
+ 2008, 2009 Free Software Foundation, Inc.
+ Originally contributed by Michael P. Hayes
(m.hayes@elec.canterbury.ac.nz, mhayes@redhat.com)
Major rewrite contributed by Danny Berlin (dberlin@dberlin.org)
and Kenneth Zadeck (zadeck@naturalbridge.com).
GCC is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free
-Software Foundation; either version 2, or (at your option) any later
+Software Foundation; either version 3, or (at your option) any later
version.
GCC is distributed in the hope that it will be useful, but WITHOUT ANY
for more details.
You should have received a copy of the GNU General Public License
-along with GCC; see the file COPYING. If not, write to the Free
-Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
-02110-1301, USA.
-*/
+along with GCC; see the file COPYING3. If not see
+<http://www.gnu.org/licenses/>. */
/*
OVERVIEW:
uninitialized variables, def-use chains, and use-def chains. However,
the interface allows other dataflow problems to be defined as well.
+Dataflow analysis is available in most of the rtl backend (the parts
+between pass_df_initialize and pass_df_finish). It is quite likely
+that these boundaries will be expanded in the future. The only
+requirement is that there be a correct control flow graph.
-USAGE:
-
-Here is an example of using the dataflow routines.
-
- struct df *df;
-
- df = df_init (init_flags);
-
- df_add_problem (df, problem);
-
- df_set_blocks (df, blocks);
-
- df_rescan_blocks (df, blocks);
+There are three variations of the live variable problem that are
+available whenever dataflow is available. The LR problem finds the
+areas that can reach a use of a variable, the UR problems finds the
+areas that can be reached from a definition of a variable. The LIVE
+problem finds the intersection of these two areas.
- df_analyze (df);
+There are several optional problems. These can be enabled when they
+are needed and disabled when they are not needed.
- df_dump (df, stderr);
+Dataflow problems are generally solved in three layers. The bottom
+layer is called scanning where a data structure is built for each rtl
+insn that describes the set of defs and uses of that insn. Scanning
+is generally kept up to date, i.e. as the insns changes, the scanned
+version of that insn changes also. There are various mechanisms for
+making this happen and are described in the INCREMENTAL SCANNING
+section.
- df_finish (df);
+In the middle layer, basic blocks are scanned to produce transfer
+functions which describe the effects of that block on the global
+dataflow solution. The transfer functions are only rebuilt if the
+some instruction within the block has changed.
+The top layer is the dataflow solution itself. The dataflow solution
+is computed by using an efficient iterative solver and the transfer
+functions. The dataflow solution must be recomputed whenever the
+control changes or if one of the transfer function changes.
-DF_INIT simply creates a poor man's object (df) that needs to be
-passed to all the dataflow routines. df_finish destroys this object
-and frees up any allocated memory.
-
-There are two flags that can be passed to df_init:
+USAGE:
-DF_NO_SCAN means that no scanning of the rtl code is performed. This
-is used if the problem instance is to do it's own scanning.
+Here is an example of using the dataflow routines.
-DF_HARD_REGS means that the scanning is to build information about
-both pseudo registers and hardware registers. Without this
-information, the problems will be solved only on pseudo registers.
+ df_[chain,live,note,rd]_add_problem (flags);
+ df_set_blocks (blocks);
+ df_analyze ();
-DF_ADD_PROBLEM adds a problem, defined by an instance to struct
-df_problem, to the set of problems solved in this instance of df. All
-calls to add a problem for a given instance of df must occur before
-the first call to DF_RESCAN_BLOCKS or DF_ANALYZE.
+ df_dump (stderr);
-For all of the problems defined in df-problems.c, there are
-convienence functions named DF_*_ADD_PROBLEM.
+ df_finish_pass (false);
+DF_[chain,live,note,rd]_ADD_PROBLEM adds a problem, defined by an
+instance to struct df_problem, to the set of problems solved in this
+instance of df. All calls to add a problem for a given instance of df
+must occur before the first call to DF_ANALYZE.
Problems can be dependent on other problems. For instance, solving
-def-use or use-def chains is dependant on solving reaching
-definitions. As long as these dependancies are listed in the problem
+def-use or use-def chains is dependent on solving reaching
+definitions. As long as these dependencies are listed in the problem
definition, the order of adding the problems is not material.
Otherwise, the problems will be solved in the order of calls to
df_add_problem. Note that it is not necessary to have a problem. In
DF_SET_BLOCKS is an optional call used to define a region of the
function on which the analysis will be performed. The normal case is
to analyze the entire function and no call to df_set_blocks is made.
+DF_SET_BLOCKS only effects the blocks that are effected when computing
+the transfer functions and final solution. The insn level information
+is always kept up to date.
When a subset is given, the analysis behaves as if the function only
contains those blocks and any edges that occur directly between the
blocks in the set. Care should be taken to call df_set_blocks right
-before the call to analyze in order to eliminate the possiblity that
+before the call to analyze in order to eliminate the possibility that
optimizations that reorder blocks invalidate the bitvector.
-
-
-DF_RESCAN_BLOCKS is an optional call that causes the scanner to be
- (re)run over the set of blocks passed in. If blocks is NULL, the entire
-function (or all of the blocks defined in df_set_blocks) is rescanned.
-If blocks contains blocks that were not defined in the call to
-df_set_blocks, these blocks are added to the set of blocks.
-
-
-DF_ANALYZE causes all of the defined problems to be (re)solved. It
-does not cause blocks to be (re)scanned at the rtl level unless no
-prior call is made to df_rescan_blocks.
-
+DF_ANALYZE causes all of the defined problems to be (re)solved. When
+DF_ANALYZE is completes, the IN and OUT sets for each basic block
+contain the computer information. The DF_*_BB_INFO macros can be used
+to access these bitvectors. All deferred rescannings are down before
+the transfer functions are recomputed.
DF_DUMP can then be called to dump the information produce to some
-file.
-
-
-
-DF_FINISH causes all of the datastructures to be cleaned up and freed.
-The df_instance is also freed and its pointer should be NULLed.
-
-
-
+file. This calls DF_DUMP_START, to print the information that is not
+basic block specific, and then calls DF_DUMP_TOP and DF_DUMP_BOTTOM
+for each block to print the basic specific information. These parts
+can all be called separately as part of a larger dump function.
+
+
+DF_FINISH_PASS causes df_remove_problem to be called on all of the
+optional problems. It also causes any insns whose scanning has been
+deferred to be rescanned as well as clears all of the changeable flags.
+Setting the pass manager TODO_df_finish flag causes this function to
+be run. However, the pass manager will call df_finish_pass AFTER the
+pass dumping has been done, so if you want to see the results of the
+optional problems in the pass dumps, use the TODO flag rather than
+calling the function yourself.
+
+INCREMENTAL SCANNING
+
+There are four ways of doing the incremental scanning:
+
+1) Immediate rescanning - Calls to df_insn_rescan, df_notes_rescan,
+ df_bb_delete, df_insn_change_bb have been added to most of
+ the low level service functions that maintain the cfg and change
+ rtl. Calling and of these routines many cause some number of insns
+ to be rescanned.
+
+ For most modern rtl passes, this is certainly the easiest way to
+ manage rescanning the insns. This technique also has the advantage
+ that the scanning information is always correct and can be relied
+ upon even after changes have been made to the instructions. This
+ technique is contra indicated in several cases:
+
+ a) If def-use chains OR use-def chains (but not both) are built,
+ using this is SIMPLY WRONG. The problem is that when a ref is
+ deleted that is the target of an edge, there is not enough
+ information to efficiently find the source of the edge and
+ delete the edge. This leaves a dangling reference that may
+ cause problems.
+
+ b) If def-use chains AND use-def chains are built, this may
+ produce unexpected results. The problem is that the incremental
+ scanning of an insn does not know how to repair the chains that
+ point into an insn when the insn changes. So the incremental
+ scanning just deletes the chains that enter and exit the insn
+ being changed. The dangling reference issue in (a) is not a
+ problem here, but if the pass is depending on the chains being
+ maintained after insns have been modified, this technique will
+ not do the correct thing.
+
+ c) If the pass modifies insns several times, this incremental
+ updating may be expensive.
+
+ d) If the pass modifies all of the insns, as does register
+ allocation, it is simply better to rescan the entire function.
+
+2) Deferred rescanning - Calls to df_insn_rescan, df_notes_rescan, and
+ df_insn_delete do not immediately change the insn but instead make
+ a note that the insn needs to be rescanned. The next call to
+ df_analyze, df_finish_pass, or df_process_deferred_rescans will
+ cause all of the pending rescans to be processed.
+
+ This is the technique of choice if either 1a, 1b, or 1c are issues
+ in the pass. In the case of 1a or 1b, a call to df_finish_pass
+ (either manually or via TODO_df_finish) should be made before the
+ next call to df_analyze or df_process_deferred_rescans.
+
+ This mode is also used by a few passes that still rely on note_uses,
+ note_stores and for_each_rtx instead of using the DF data. This
+ can be said to fall under case 1c.
+
+ To enable this mode, call df_set_flags (DF_DEFER_INSN_RESCAN).
+ (This mode can be cleared by calling df_clear_flags
+ (DF_DEFER_INSN_RESCAN) but this does not cause the deferred insns to
+ be rescanned.
+
+3) Total rescanning - In this mode the rescanning is disabled.
+ Only when insns are deleted is the df information associated with
+ it also deleted. At the end of the pass, a call must be made to
+ df_insn_rescan_all. This method is used by the register allocator
+ since it generally changes each insn multiple times (once for each ref)
+ and does not need to make use of the updated scanning information.
+
+4) Do it yourself - In this mechanism, the pass updates the insns
+ itself using the low level df primitives. Currently no pass does
+ this, but it has the advantage that it is quite efficient given
+ that the pass generally has exact knowledge of what it is changing.
+
+DATA STRUCTURES
Scanning produces a `struct df_ref' data structure (ref) is allocated
for every register reference (def or use) and this records the insn
the linked information such as def use or use def chains.
-
PHILOSOPHY:
While incremental bitmaps are not worthwhile to maintain, incremental
As for the bit vector problems, there is no interface to give a set of
blocks over with to resolve the iteration. In general, restarting a
dataflow iteration is difficult and expensive. Again, the best way to
-keep the dataflow infomation up to data (if this is really what is
+keep the dataflow information up to data (if this is really what is
needed) it to formulate a problem specific solution.
There are fine grained calls for creating and deleting references from
DATA STRUCTURES:
-The basic object is a DF_REF (reference) and this may either be a
+The basic object is a DF_REF (reference) and this may either be a
DEF (definition) or a USE of a register.
These are linked into a variety of lists; namely reg-def, reg-use,
Note that the reg-def and reg-use chains are generally short for
pseudos and long for the hard registers.
+ACCESSING INSNS:
+
+1) The df insn information is kept in an array of DF_INSN_INFO objects.
+ The array is indexed by insn uid, and every DF_REF points to the
+ DF_INSN_INFO object of the insn that contains the reference.
+
+2) Each insn has three sets of refs, which are linked into one of three
+ lists: The insn's defs list (accessed by the DF_INSN_INFO_DEFS,
+ DF_INSN_DEFS, or DF_INSN_UID_DEFS macros), the insn's uses list
+ (accessed by the DF_INSN_INFO_USES, DF_INSN_USES, or
+ DF_INSN_UID_USES macros) or the insn's eq_uses list (accessed by the
+ DF_INSN_INFO_EQ_USES, DF_INSN_EQ_USES or DF_INSN_UID_EQ_USES macros).
+ The latter list are the list of references in REG_EQUAL or REG_EQUIV
+ notes. These macros produce a ref (or NULL), the rest of the list
+ can be obtained by traversal of the NEXT_REF field (accessed by the
+ DF_REF_NEXT_REF macro.) There is no significance to the ordering of
+ the uses or refs in an instruction.
+
+3) Each insn has a logical uid field (LUID) which is stored in the
+ DF_INSN_INFO object for the insn. The LUID field is accessed by
+ the DF_INSN_INFO_LUID, DF_INSN_LUID, and DF_INSN_UID_LUID macros.
+ When properly set, the LUID is an integer that numbers each insn in
+ the basic block, in order from the start of the block.
+ The numbers are only correct after a call to df_analyze. They will
+ rot after insns are added deleted or moved round.
+
ACCESSING REFS:
There are 4 ways to obtain access to refs:
1) References are divided into two categories, REAL and ARTIFICIAL.
- REAL refs are associated with instructions. They are linked into
- either in the insn's defs list (accessed by the DF_INSN_DEFS or
- DF_INSN_UID_DEFS macros) or the insn's uses list (accessed by the
- DF_INSN_USES or DF_INSN_UID_USES macros). These macros produce a
- ref (or NULL), the rest of the list can be obtained by traversal of
- the NEXT_REF field (accessed by the DF_REF_NEXT_REF macro.) There
- is no significance to the ordering of the uses or refs in an
- instruction.
+ REAL refs are associated with instructions.
ARTIFICIAL refs are associated with basic blocks. The heads of
- these lists can be accessed by calling get_artificial_defs or
- get_artificial_uses for the particular basic block. Artificial
- defs and uses are only there if DF_HARD_REGS was specified when the
- df instance was created.
-
+ these lists can be accessed by calling df_get_artificial_defs or
+ df_get_artificial_uses for the particular basic block.
+
Artificial defs and uses occur both at the beginning and ends of blocks.
For blocks that area at the destination of eh edges, the
register and are put there to keep the code from forgetting about
them.
- Artifical defs occur at the end of the entry block. These arise
+ Artificial defs occur at the end of the entry block. These arise
from registers that are live at entry to the function.
-2) All of the uses and defs associated with each pseudo or hard
- register are linked in a bidirectional chain. These are called
- reg-use or reg_def chains.
+2) There are three types of refs: defs, uses and eq_uses. (Eq_uses are
+ uses that appear inside a REG_EQUAL or REG_EQUIV note.)
+
+ All of the eq_uses, uses and defs associated with each pseudo or
+ hard register may be linked in a bidirectional chain. These are
+ called reg-use or reg_def chains. If the changeable flag
+ DF_EQ_NOTES is set when the chains are built, the eq_uses will be
+ treated like uses. If it is not set they are ignored.
- The first use (or def) for a register can be obtained using the
- DF_REG_USE_GET macro (or DF_REG_DEF_GET macro). Subsequent uses
- for the same regno can be obtained by following the next_reg field
- of the ref.
+ The first use, eq_use or def for a register can be obtained using
+ the DF_REG_USE_CHAIN, DF_REG_EQ_USE_CHAIN or DF_REG_DEF_CHAIN
+ macros. Subsequent uses for the same regno can be obtained by
+ following the next_reg field of the ref. The number of elements in
+ each of the chains can be found by using the DF_REG_USE_COUNT,
+ DF_REG_EQ_USE_COUNT or DF_REG_DEF_COUNT macros.
In previous versions of this code, these chains were ordered. It
has not been practical to continue this practice.
3) If def-use or use-def chains are built, these can be traversed to
- get to other refs.
+ get to other refs. If the flag DF_EQ_NOTES has been set, the chains
+ include the eq_uses. Otherwise these are ignored when building the
+ chains.
4) An array of all of the uses (and an array of all of the defs) can
be built. These arrays are indexed by the value in the id
structure. These arrays are only lazily kept up to date, and that
process can be expensive. To have these arrays built, call
- df_reorganize_refs. Note that the values in the id field of a ref
- may change across calls to df_analyze or df_reorganize refs.
+ df_reorganize_defs or df_reorganize_uses. If the flag DF_EQ_NOTES
+ has been set the array will contain the eq_uses. Otherwise these
+ are ignored when building the array and assigning the ids. Note
+ that the values in the id field of a ref may change across calls to
+ df_analyze or df_reorganize_defs or df_reorganize_uses.
If the only use of this array is to find all of the refs, it is
better to traverse all of the registers and then traverse all of
reg-use or reg-def chains.
-
-
NOTES:
-
+
Embedded addressing side-effects, such as POST_INC or PRE_INC, generate
both a use and a def. These are both marked read/write to show that they
are dependent. For example, (set (reg 40) (mem (post_inc (reg 42))))
A set to a REG inside a ZERO_EXTRACT, or a set to a non-paradoxical SUBREG
for which the number of word_mode units covered by the outer mode is
-smaller than that covered by the inner mode, invokes a read-modify-write.
+smaller than that covered by the inner mode, invokes a read-modify-write
operation. We generate both a use and a def and again mark them
read/write.
Paradoxical subreg writes do not leave a trace of the old content, so they
-are write-only operations.
+are write-only operations.
*/
#include "timevar.h"
#include "df.h"
#include "tree-pass.h"
+#include "params.h"
-static struct df *ddf = NULL;
-struct df *shared_df = NULL;
-
-static void * df_get_bb_info (struct dataflow *, unsigned int);
+static void *df_get_bb_info (struct dataflow *, unsigned int);
static void df_set_bb_info (struct dataflow *, unsigned int, void *);
-/*----------------------------------------------------------------------------
- Functions to create, destroy and manipulate an instance of df.
-----------------------------------------------------------------------------*/
+#ifdef DF_DEBUG_CFG
+static void df_set_clean_cfg (void);
+#endif
+/* An obstack for bitmap not related to specific dataflow problems.
+ This obstack should e.g. be used for bitmaps with a short life time
+ such as temporary bitmaps. */
-/* Initialize dataflow analysis and allocate and initialize dataflow
- memory. */
+bitmap_obstack df_bitmap_obstack;
-struct df *
-df_init (int flags)
-{
- struct df *df = xcalloc (1, sizeof (struct df));
- df->flags = flags;
- /* This is executed once per compilation to initialize platform
- specific data structures. */
- df_hard_reg_init ();
-
- /* All df instance must define the scanning problem. */
- df_scan_add_problem (df);
- ddf = df;
- return df;
-}
+/*----------------------------------------------------------------------------
+ Functions to create, destroy and manipulate an instance of df.
+----------------------------------------------------------------------------*/
+
+struct df *df;
-/* Add PROBLEM to the DF instance. */
+/* Add PROBLEM (and any dependent problems) to the DF instance. */
-struct dataflow *
-df_add_problem (struct df *df, struct df_problem *problem)
+void
+df_add_problem (struct df_problem *problem)
{
struct dataflow *dflow;
+ int i;
/* First try to add the dependent problem. */
if (problem->dependent_problem)
- df_add_problem (df, problem->dependent_problem);
+ df_add_problem (problem->dependent_problem);
/* Check to see if this problem has already been defined. If it
has, just return that instance, if not, add it to the end of the
vector. */
dflow = df->problems_by_index[problem->id];
if (dflow)
- return dflow;
+ return;
/* Make a new one and add it to the end. */
- dflow = xcalloc (1, sizeof (struct dataflow));
- dflow->df = df;
+ dflow = XCNEW (struct dataflow);
dflow->problem = problem;
- df->problems_in_order[df->num_problems_defined++] = dflow;
+ dflow->computed = false;
+ dflow->solutions_dirty = true;
df->problems_by_index[dflow->problem->id] = dflow;
- return dflow;
+ /* Keep the defined problems ordered by index. This solves the
+ problem that RI will use the information from UREC if UREC has
+ been defined, or from LIVE if LIVE is defined and otherwise LR.
+ However for this to work, the computation of RI must be pushed
+ after which ever of those problems is defined, but we do not
+ require any of those except for LR to have actually been
+ defined. */
+ df->num_problems_defined++;
+ for (i = df->num_problems_defined - 2; i >= 0; i--)
+ {
+ if (problem->id < df->problems_in_order[i]->problem->id)
+ df->problems_in_order[i+1] = df->problems_in_order[i];
+ else
+ {
+ df->problems_in_order[i+1] = dflow;
+ return;
+ }
+ }
+ df->problems_in_order[0] = dflow;
+}
+
+
+/* Set the MASK flags in the DFLOW problem. The old flags are
+ returned. If a flag is not allowed to be changed this will fail if
+ checking is enabled. */
+int
+df_set_flags (int changeable_flags)
+{
+ int old_flags = df->changeable_flags;
+ df->changeable_flags |= changeable_flags;
+ return old_flags;
+}
+
+
+/* Clear the MASK flags in the DFLOW problem. The old flags are
+ returned. If a flag is not allowed to be changed this will fail if
+ checking is enabled. */
+int
+df_clear_flags (int changeable_flags)
+{
+ int old_flags = df->changeable_flags;
+ df->changeable_flags &= ~changeable_flags;
+ return old_flags;
}
not called or is called with null, the entire function in
analyzed. */
-void
-df_set_blocks (struct df *df, bitmap blocks)
+void
+df_set_blocks (bitmap blocks)
{
if (blocks)
{
+ if (dump_file)
+ bitmap_print (dump_file, blocks, "setting blocks to analyze ", "\n");
if (df->blocks_to_analyze)
{
+ /* This block is called to change the focus from one subset
+ to another. */
int p;
- bitmap diff = BITMAP_ALLOC (NULL);
- bitmap all = BITMAP_ALLOC (NULL);
+ bitmap diff = BITMAP_ALLOC (&df_bitmap_obstack);
bitmap_and_compl (diff, df->blocks_to_analyze, blocks);
- for (p = df->num_problems_defined - 1; p >= 0 ;p--)
+ for (p = 0; p < df->num_problems_defined; p++)
{
struct dataflow *dflow = df->problems_in_order[p];
- if (*dflow->problem->reset_fun)
- (*dflow->problem->reset_fun) (dflow, df->blocks_to_analyze);
- else if (*dflow->problem->free_bb_fun)
+ if (dflow->optional_p && dflow->problem->reset_fun)
+ dflow->problem->reset_fun (df->blocks_to_analyze);
+ else if (dflow->problem->free_blocks_on_set_blocks)
{
bitmap_iterator bi;
unsigned int bb_index;
-
+
EXECUTE_IF_SET_IN_BITMAP (diff, 0, bb_index, bi)
{
basic_block bb = BASIC_BLOCK (bb_index);
if (bb)
{
- (*dflow->problem->free_bb_fun)
- (dflow, bb, df_get_bb_info (dflow, bb_index));
- df_set_bb_info (dflow, bb_index, NULL);
+ void *bb_info = df_get_bb_info (dflow, bb_index);
+ if (bb_info)
+ {
+ dflow->problem->free_bb_fun (bb, bb_info);
+ df_set_bb_info (dflow, bb_index, NULL);
+ }
}
}
}
}
- BITMAP_FREE (all);
BITMAP_FREE (diff);
}
else
{
- /* If we have not actually run scanning before, do not try
- to clear anything. */
- struct dataflow *scan_dflow = df->problems_by_index [DF_SCAN];
- if (scan_dflow->problem_data)
+ /* This block of code is executed to change the focus from
+ the entire function to a subset. */
+ bitmap blocks_to_reset = NULL;
+ int p;
+ for (p = 0; p < df->num_problems_defined; p++)
{
- bitmap blocks_to_reset = NULL;
- int p;
- for (p = df->num_problems_defined - 1; p >= 0 ;p--)
+ struct dataflow *dflow = df->problems_in_order[p];
+ if (dflow->optional_p && dflow->problem->reset_fun)
{
- struct dataflow *dflow = df->problems_in_order[p];
- if (*dflow->problem->reset_fun)
+ if (!blocks_to_reset)
{
- if (!blocks_to_reset)
+ basic_block bb;
+ blocks_to_reset =
+ BITMAP_ALLOC (&df_bitmap_obstack);
+ FOR_ALL_BB(bb)
{
- basic_block bb;
- blocks_to_reset = BITMAP_ALLOC (NULL);
- FOR_ALL_BB(bb)
- {
- bitmap_set_bit (blocks_to_reset, bb->index);
- }
+ bitmap_set_bit (blocks_to_reset, bb->index);
}
- (*dflow->problem->reset_fun) (dflow, blocks_to_reset);
}
+ dflow->problem->reset_fun (blocks_to_reset);
}
- if (blocks_to_reset)
- BITMAP_FREE (blocks_to_reset);
}
- df->blocks_to_analyze = BITMAP_ALLOC (NULL);
+ if (blocks_to_reset)
+ BITMAP_FREE (blocks_to_reset);
+
+ df->blocks_to_analyze = BITMAP_ALLOC (&df_bitmap_obstack);
}
bitmap_copy (df->blocks_to_analyze, blocks);
+ df->analyze_subset = true;
}
else
{
+ /* This block is executed to reset the focus to the entire
+ function. */
+ if (dump_file)
+ fprintf (dump_file, "clearing blocks_to_analyze\n");
if (df->blocks_to_analyze)
{
BITMAP_FREE (df->blocks_to_analyze);
df->blocks_to_analyze = NULL;
}
+ df->analyze_subset = false;
+ }
+
+ /* Setting the blocks causes the refs to be unorganized since only
+ the refs in the blocks are seen. */
+ df_maybe_reorganize_def_refs (DF_REF_ORDER_NO_TABLE);
+ df_maybe_reorganize_use_refs (DF_REF_ORDER_NO_TABLE);
+ df_mark_solutions_dirty ();
+}
+
+
+/* Delete a DFLOW problem (and any problems that depend on this
+ problem). */
+
+void
+df_remove_problem (struct dataflow *dflow)
+{
+ struct df_problem *problem;
+ int i;
+
+ if (!dflow)
+ return;
+
+ problem = dflow->problem;
+ gcc_assert (problem->remove_problem_fun);
+
+ /* Delete any problems that depended on this problem first. */
+ for (i = 0; i < df->num_problems_defined; i++)
+ if (df->problems_in_order[i]->problem->dependent_problem == problem)
+ df_remove_problem (df->problems_in_order[i]);
+
+ /* Now remove this problem. */
+ for (i = 0; i < df->num_problems_defined; i++)
+ if (df->problems_in_order[i] == dflow)
+ {
+ int j;
+ for (j = i + 1; j < df->num_problems_defined; j++)
+ df->problems_in_order[j-1] = df->problems_in_order[j];
+ df->problems_in_order[j-1] = NULL;
+ df->num_problems_defined--;
+ break;
+ }
+
+ (problem->remove_problem_fun) ();
+ df->problems_by_index[problem->id] = NULL;
+}
+
+
+/* Remove all of the problems that are not permanent. Scanning, LR
+ and (at -O2 or higher) LIVE are permanent, the rest are removable.
+ Also clear all of the changeable_flags. */
+
+void
+df_finish_pass (bool verify ATTRIBUTE_UNUSED)
+{
+ int i;
+ int removed = 0;
+
+#ifdef ENABLE_DF_CHECKING
+ enum df_changeable_flags saved_flags;
+#endif
+
+ if (!df)
+ return;
+
+ df_maybe_reorganize_def_refs (DF_REF_ORDER_NO_TABLE);
+ df_maybe_reorganize_use_refs (DF_REF_ORDER_NO_TABLE);
+
+#ifdef ENABLE_DF_CHECKING
+ saved_flags = df->changeable_flags;
+#endif
+
+ for (i = 0; i < df->num_problems_defined; i++)
+ {
+ struct dataflow *dflow = df->problems_in_order[i];
+ struct df_problem *problem = dflow->problem;
+
+ if (dflow->optional_p)
+ {
+ gcc_assert (problem->remove_problem_fun);
+ (problem->remove_problem_fun) ();
+ df->problems_in_order[i] = NULL;
+ df->problems_by_index[problem->id] = NULL;
+ removed++;
+ }
+ }
+ df->num_problems_defined -= removed;
+
+ /* Clear all of the flags. */
+ df->changeable_flags = 0;
+ df_process_deferred_rescans ();
+
+ /* Set the focus back to the whole function. */
+ if (df->blocks_to_analyze)
+ {
+ BITMAP_FREE (df->blocks_to_analyze);
+ df->blocks_to_analyze = NULL;
+ df_mark_solutions_dirty ();
+ df->analyze_subset = false;
+ }
+
+#ifdef ENABLE_DF_CHECKING
+ /* Verification will fail in DF_NO_INSN_RESCAN. */
+ if (!(saved_flags & DF_NO_INSN_RESCAN))
+ {
+ df_lr_verify_transfer_functions ();
+ if (df_live)
+ df_live_verify_transfer_functions ();
}
+
+#ifdef DF_DEBUG_CFG
+ df_set_clean_cfg ();
+#endif
+#endif
+
+#ifdef ENABLE_CHECKING
+ if (verify)
+ df->changeable_flags |= DF_VERIFY_SCHEDULED;
+#endif
+}
+
+
+/* Set up the dataflow instance for the entire back end. */
+
+static unsigned int
+rest_of_handle_df_initialize (void)
+{
+ gcc_assert (!df);
+ df = XCNEW (struct df);
+ df->changeable_flags = 0;
+
+ bitmap_obstack_initialize (&df_bitmap_obstack);
+
+ /* Set this to a conservative value. Stack_ptr_mod will compute it
+ correctly later. */
+ current_function_sp_is_unchanging = 0;
+
+ df_scan_add_problem ();
+ df_scan_alloc (NULL);
+
+ /* These three problems are permanent. */
+ df_lr_add_problem ();
+ if (optimize > 1)
+ df_live_add_problem ();
+
+ df->postorder = XNEWVEC (int, last_basic_block);
+ df->postorder_inverted = XNEWVEC (int, last_basic_block);
+ df->n_blocks = post_order_compute (df->postorder, true, true);
+ df->n_blocks_inverted = inverted_post_order_compute (df->postorder_inverted);
+ gcc_assert (df->n_blocks == df->n_blocks_inverted);
+
+ df->hard_regs_live_count = XNEWVEC (unsigned int, FIRST_PSEUDO_REGISTER);
+ memset (df->hard_regs_live_count, 0,
+ sizeof (unsigned int) * FIRST_PSEUDO_REGISTER);
+
+ df_hard_reg_init ();
+ /* After reload, some ports add certain bits to regs_ever_live so
+ this cannot be reset. */
+ df_compute_regs_ever_live (true);
+ df_scan_blocks ();
+ df_compute_regs_ever_live (false);
+ return 0;
}
+static bool
+gate_opt (void)
+{
+ return optimize > 0;
+}
+
+
+struct rtl_opt_pass pass_df_initialize_opt =
+{
+ {
+ RTL_PASS,
+ "dfinit", /* name */
+ gate_opt, /* gate */
+ rest_of_handle_df_initialize, /* execute */
+ NULL, /* sub */
+ NULL, /* next */
+ 0, /* static_pass_number */
+ TV_NONE, /* tv_id */
+ 0, /* properties_required */
+ 0, /* properties_provided */
+ 0, /* properties_destroyed */
+ 0, /* todo_flags_start */
+ 0 /* todo_flags_finish */
+ }
+};
+
+
+static bool
+gate_no_opt (void)
+{
+ return optimize == 0;
+}
+
+
+struct rtl_opt_pass pass_df_initialize_no_opt =
+{
+ {
+ RTL_PASS,
+ "no-opt dfinit", /* name */
+ gate_no_opt, /* gate */
+ rest_of_handle_df_initialize, /* execute */
+ NULL, /* sub */
+ NULL, /* next */
+ 0, /* static_pass_number */
+ TV_NONE, /* tv_id */
+ 0, /* properties_required */
+ 0, /* properties_provided */
+ 0, /* properties_destroyed */
+ 0, /* todo_flags_start */
+ 0 /* todo_flags_finish */
+ }
+};
+
+
/* Free all the dataflow info and the DF structure. This should be
called from the df_finish macro which also NULLs the parm. */
-void
-df_finish1 (struct df *df)
+static unsigned int
+rest_of_handle_df_finish (void)
{
int i;
+ gcc_assert (df);
+
for (i = 0; i < df->num_problems_defined; i++)
- (*df->problems_in_order[i]->problem->free_fun) (df->problems_in_order[i]);
+ {
+ struct dataflow *dflow = df->problems_in_order[i];
+ dflow->problem->free_fun ();
+ }
+ if (df->postorder)
+ free (df->postorder);
+ if (df->postorder_inverted)
+ free (df->postorder_inverted);
+ free (df->hard_regs_live_count);
free (df);
+ df = NULL;
+
+ bitmap_obstack_release (&df_bitmap_obstack);
+ return 0;
}
+
+struct rtl_opt_pass pass_df_finish =
+{
+ {
+ RTL_PASS,
+ "dfinish", /* name */
+ NULL, /* gate */
+ rest_of_handle_df_finish, /* execute */
+ NULL, /* sub */
+ NULL, /* next */
+ 0, /* static_pass_number */
+ TV_NONE, /* tv_id */
+ 0, /* properties_required */
+ 0, /* properties_provided */
+ 0, /* properties_destroyed */
+ 0, /* todo_flags_start */
+ 0 /* todo_flags_finish */
+ }
+};
+
+
+
+
\f
/*----------------------------------------------------------------------------
The general data flow analysis engine.
----------------------------------------------------------------------------*/
-/* Hybrid search algorithm from "Implementation Techniques for
- Efficient Data-Flow Analysis of Large Programs". */
+/* Helper function for df_worklist_dataflow.
+ Propagate the dataflow forward.
+ Given a BB_INDEX, do the dataflow propagation
+ and set bits on for successors in PENDING
+ if the out set of the dataflow has changed. */
static void
-df_hybrid_search_forward (basic_block bb,
- struct dataflow *dataflow,
- bool single_pass)
+df_worklist_propagate_forward (struct dataflow *dataflow,
+ unsigned bb_index,
+ unsigned *bbindex_to_postorder,
+ bitmap pending,
+ sbitmap considered)
{
- int result_changed;
- int i = bb->index;
edge e;
edge_iterator ei;
+ basic_block bb = BASIC_BLOCK (bb_index);
- SET_BIT (dataflow->visited, bb->index);
- gcc_assert (TEST_BIT (dataflow->pending, bb->index));
- RESET_BIT (dataflow->pending, i);
-
- /* Calculate <conf_op> of predecessor_outs. */
+ /* Calculate <conf_op> of incoming edges. */
if (EDGE_COUNT (bb->preds) > 0)
FOR_EACH_EDGE (e, ei, bb->preds)
{
- if (!TEST_BIT (dataflow->considered, e->src->index))
- continue;
-
- (*dataflow->problem->con_fun_n) (dataflow, e);
+ if (TEST_BIT (considered, e->src->index))
+ dataflow->problem->con_fun_n (e);
}
- else if (*dataflow->problem->con_fun_0)
- (*dataflow->problem->con_fun_0) (dataflow, bb);
-
- result_changed = (*dataflow->problem->trans_fun) (dataflow, i);
-
- if (!result_changed || single_pass)
- return;
-
- FOR_EACH_EDGE (e, ei, bb->succs)
- {
- if (e->dest->index == i)
- continue;
- if (!TEST_BIT (dataflow->considered, e->dest->index))
- continue;
- SET_BIT (dataflow->pending, e->dest->index);
- }
-
- FOR_EACH_EDGE (e, ei, bb->succs)
+ else if (dataflow->problem->con_fun_0)
+ dataflow->problem->con_fun_0 (bb);
+
+ if (dataflow->problem->trans_fun (bb_index))
{
- if (e->dest->index == i)
- continue;
-
- if (!TEST_BIT (dataflow->considered, e->dest->index))
- continue;
- if (!TEST_BIT (dataflow->visited, e->dest->index))
- df_hybrid_search_forward (e->dest, dataflow, single_pass);
+ /* The out set of this block has changed.
+ Propagate to the outgoing blocks. */
+ FOR_EACH_EDGE (e, ei, bb->succs)
+ {
+ unsigned ob_index = e->dest->index;
+
+ if (TEST_BIT (considered, ob_index))
+ bitmap_set_bit (pending, bbindex_to_postorder[ob_index]);
+ }
}
}
+
+/* Helper function for df_worklist_dataflow.
+ Propagate the dataflow backward. */
+
static void
-df_hybrid_search_backward (basic_block bb,
- struct dataflow *dataflow,
- bool single_pass)
+df_worklist_propagate_backward (struct dataflow *dataflow,
+ unsigned bb_index,
+ unsigned *bbindex_to_postorder,
+ bitmap pending,
+ sbitmap considered)
{
- int result_changed;
- int i = bb->index;
edge e;
edge_iterator ei;
-
- SET_BIT (dataflow->visited, bb->index);
- gcc_assert (TEST_BIT (dataflow->pending, bb->index));
- RESET_BIT (dataflow->pending, i);
+ basic_block bb = BASIC_BLOCK (bb_index);
- /* Calculate <conf_op> of predecessor_outs. */
+ /* Calculate <conf_op> of incoming edges. */
if (EDGE_COUNT (bb->succs) > 0)
- FOR_EACH_EDGE (e, ei, bb->succs)
- {
- if (!TEST_BIT (dataflow->considered, e->dest->index))
- continue;
-
- (*dataflow->problem->con_fun_n) (dataflow, e);
- }
- else if (*dataflow->problem->con_fun_0)
- (*dataflow->problem->con_fun_0) (dataflow, bb);
-
- result_changed = (*dataflow->problem->trans_fun) (dataflow, i);
-
- if (!result_changed || single_pass)
- return;
-
- FOR_EACH_EDGE (e, ei, bb->preds)
- {
- if (e->src->index == i)
- continue;
-
- if (!TEST_BIT (dataflow->considered, e->src->index))
- continue;
+ FOR_EACH_EDGE (e, ei, bb->succs)
+ {
+ if (TEST_BIT (considered, e->dest->index))
+ dataflow->problem->con_fun_n (e);
+ }
+ else if (dataflow->problem->con_fun_0)
+ dataflow->problem->con_fun_0 (bb);
- SET_BIT (dataflow->pending, e->src->index);
- }
-
- FOR_EACH_EDGE (e, ei, bb->preds)
+ if (dataflow->problem->trans_fun (bb_index))
{
- if (e->src->index == i)
- continue;
-
- if (!TEST_BIT (dataflow->considered, e->src->index))
- continue;
-
- if (!TEST_BIT (dataflow->visited, e->src->index))
- df_hybrid_search_backward (e->src, dataflow, single_pass);
+ /* The out set of this block has changed.
+ Propagate to the outgoing blocks. */
+ FOR_EACH_EDGE (e, ei, bb->preds)
+ {
+ unsigned ob_index = e->src->index;
+
+ if (TEST_BIT (considered, ob_index))
+ bitmap_set_bit (pending, bbindex_to_postorder[ob_index]);
+ }
}
}
-/* This function will perform iterative bitvector dataflow described
- by DATAFLOW, producing the in and out sets. Only the part of the
- cfg induced by blocks in DATAFLOW->order is taken into account.
- SINGLE_PASS is true if you just want to make one pass over the
- blocks. */
+/* This will free "pending". */
+
+static void
+df_worklist_dataflow_doublequeue (struct dataflow *dataflow,
+ bitmap pending,
+ sbitmap considered,
+ int *blocks_in_postorder,
+ unsigned *bbindex_to_postorder)
+{
+ enum df_flow_dir dir = dataflow->problem->dir;
+ int dcount = 0;
+ bitmap worklist = BITMAP_ALLOC (&df_bitmap_obstack);
+
+ /* Double-queueing. Worklist is for the current iteration,
+ and pending is for the next. */
+ while (!bitmap_empty_p (pending))
+ {
+ /* Swap pending and worklist. */
+ bitmap temp = worklist;
+ worklist = pending;
+ pending = temp;
+
+ do
+ {
+ int index;
+ unsigned bb_index;
+ dcount++;
+
+ index = bitmap_first_set_bit (worklist);
+ bitmap_clear_bit (worklist, index);
+
+ bb_index = blocks_in_postorder[index];
+
+ if (dir == DF_FORWARD)
+ df_worklist_propagate_forward (dataflow, bb_index,
+ bbindex_to_postorder,
+ pending, considered);
+ else
+ df_worklist_propagate_backward (dataflow, bb_index,
+ bbindex_to_postorder,
+ pending, considered);
+ }
+ while (!bitmap_empty_p (worklist));
+ }
+
+ BITMAP_FREE (worklist);
+ BITMAP_FREE (pending);
+
+ /* Dump statistics. */
+ if (dump_file)
+ fprintf (dump_file, "df_worklist_dataflow_doublequeue:"
+ "n_basic_blocks %d n_edges %d"
+ " count %d (%5.2g)\n",
+ n_basic_blocks, n_edges,
+ dcount, dcount / (float)n_basic_blocks);
+}
+
+/* Worklist-based dataflow solver. It uses sbitmap as a worklist,
+ with "n"-th bit representing the n-th block in the reverse-postorder order.
+ The solver is a double-queue algorithm similar to the "double stack" solver
+ from Cooper, Harvey and Kennedy, "Iterative data-flow analysis, Revisited".
+ The only significant difference is that the worklist in this implementation
+ is always sorted in RPO of the CFG visiting direction. */
void
-df_iterative_dataflow (struct dataflow *dataflow,
- bitmap blocks_to_consider, bitmap blocks_to_init,
- int *blocks_in_postorder, int n_blocks,
- bool single_pass)
+df_worklist_dataflow (struct dataflow *dataflow,
+ bitmap blocks_to_consider,
+ int *blocks_in_postorder,
+ int n_blocks)
{
- unsigned int idx;
- int i;
- sbitmap visited = sbitmap_alloc (last_basic_block);
- sbitmap pending = sbitmap_alloc (last_basic_block);
+ bitmap pending = BITMAP_ALLOC (&df_bitmap_obstack);
sbitmap considered = sbitmap_alloc (last_basic_block);
bitmap_iterator bi;
+ unsigned int *bbindex_to_postorder;
+ int i;
+ unsigned int index;
+ enum df_flow_dir dir = dataflow->problem->dir;
- dataflow->visited = visited;
- dataflow->pending = pending;
- dataflow->considered = considered;
+ gcc_assert (dir != DF_NONE);
- sbitmap_zero (visited);
- sbitmap_zero (pending);
- sbitmap_zero (considered);
+ /* BBINDEX_TO_POSTORDER maps the bb->index to the reverse postorder. */
+ bbindex_to_postorder =
+ (unsigned int *)xmalloc (last_basic_block * sizeof (unsigned int));
+
+ /* Initialize the array to an out-of-bound value. */
+ for (i = 0; i < last_basic_block; i++)
+ bbindex_to_postorder[i] = last_basic_block;
- EXECUTE_IF_SET_IN_BITMAP (blocks_to_consider, 0, idx, bi)
+ /* Initialize the considered map. */
+ sbitmap_zero (considered);
+ EXECUTE_IF_SET_IN_BITMAP (blocks_to_consider, 0, index, bi)
{
- SET_BIT (considered, idx);
+ SET_BIT (considered, index);
}
+ /* Initialize the mapping of block index to postorder. */
for (i = 0; i < n_blocks; i++)
{
- idx = blocks_in_postorder[i];
- SET_BIT (pending, idx);
- };
-
- (*dataflow->problem->init_fun) (dataflow, blocks_to_init);
-
- while (1)
- {
-
- /* For forward problems, you want to pass in reverse postorder
- and for backward problems you want postorder. This has been
- shown to be as good as you can do by several people, the
- first being Mathew Hecht in his phd dissertation.
-
- The nodes are passed into this function in postorder. */
-
- if (dataflow->problem->dir == DF_FORWARD)
- {
- for (i = n_blocks - 1 ; i >= 0 ; i--)
- {
- idx = blocks_in_postorder[i];
-
- if (TEST_BIT (pending, idx) && !TEST_BIT (visited, idx))
- df_hybrid_search_forward (BASIC_BLOCK (idx), dataflow, single_pass);
- }
- }
- else
- {
- for (i = 0; i < n_blocks; i++)
- {
- idx = blocks_in_postorder[i];
-
- if (TEST_BIT (pending, idx) && !TEST_BIT (visited, idx))
- df_hybrid_search_backward (BASIC_BLOCK (idx), dataflow, single_pass);
- }
- }
+ bbindex_to_postorder[blocks_in_postorder[i]] = i;
+ /* Add all blocks to the worklist. */
+ bitmap_set_bit (pending, i);
+ }
- if (sbitmap_first_set_bit (pending) == -1)
- break;
+ /* Initialize the problem. */
+ if (dataflow->problem->init_fun)
+ dataflow->problem->init_fun (blocks_to_consider);
- sbitmap_zero (visited);
- }
+ /* Solve it. */
+ df_worklist_dataflow_doublequeue (dataflow, pending, considered,
+ blocks_in_postorder,
+ bbindex_to_postorder);
- sbitmap_free (pending);
- sbitmap_free (visited);
sbitmap_free (considered);
+ free (bbindex_to_postorder);
}
}
-/* Execute dataflow analysis on a single dataflow problem.
-
- There are three sets of blocks passed in:
+/* Execute dataflow analysis on a single dataflow problem.
BLOCKS_TO_CONSIDER are the blocks whose solution can either be
examined or will be computed. For calls from DF_ANALYZE, this is
- the set of blocks that has been passed to DF_SET_BLOCKS. For calls
- from DF_ANALYZE_SIMPLE_CHANGE_SOME_BLOCKS, this is the set of
- blocks in the fringe (the set of blocks passed in plus the set of
- immed preds and succs of those blocks).
-
- BLOCKS_TO_INIT are the blocks whose solution will be changed by
- this iteration. For calls from DF_ANALYZE, this is the set of
- blocks that has been passed to DF_SET_BLOCKS. For calls from
- DF_ANALYZE_SIMPLE_CHANGE_SOME_BLOCKS, this is the set of blocks
- passed in.
-
- BLOCKS_TO_SCAN are the set of blocks that need to be rescanned.
- For calls from DF_ANALYZE, this is the accumulated set of blocks
- that has been passed to DF_RESCAN_BLOCKS since the last call to
- DF_ANALYZE. For calls from DF_ANALYZE_SIMPLE_CHANGE_SOME_BLOCKS,
- this is the set of blocks passed in.
-
- blocks_to_consider blocks_to_init blocks_to_scan
- full redo all all all
- partial redo all all sub
- small fixup fringe sub sub
+ the set of blocks that has been passed to DF_SET_BLOCKS.
*/
-static void
-df_analyze_problem (struct dataflow *dflow,
- bitmap blocks_to_consider,
- bitmap blocks_to_init,
- bitmap blocks_to_scan,
- int *postorder, int n_blocks, bool single_pass)
-{
- /* (Re)Allocate the datastructures necessary to solve the problem. */
- if (*dflow->problem->alloc_fun)
- (*dflow->problem->alloc_fun) (dflow, blocks_to_scan);
-
- /* Set up the problem and compute the local information. This
- function is passed both the blocks_to_consider and the
- blocks_to_scan because the RD and RU problems require the entire
- function to be rescanned if they are going to be updated. */
- if (*dflow->problem->local_compute_fun)
- (*dflow->problem->local_compute_fun) (dflow, blocks_to_consider, blocks_to_scan);
+void
+df_analyze_problem (struct dataflow *dflow,
+ bitmap blocks_to_consider,
+ int *postorder, int n_blocks)
+{
+ timevar_push (dflow->problem->tv_id);
+
+#ifdef ENABLE_DF_CHECKING
+ if (dflow->problem->verify_start_fun)
+ dflow->problem->verify_start_fun ();
+#endif
+
+ /* (Re)Allocate the datastructures necessary to solve the problem. */
+ if (dflow->problem->alloc_fun)
+ dflow->problem->alloc_fun (blocks_to_consider);
+
+ /* Set up the problem and compute the local information. */
+ if (dflow->problem->local_compute_fun)
+ dflow->problem->local_compute_fun (blocks_to_consider);
/* Solve the equations. */
- if (*dflow->problem->dataflow_fun)
- (*dflow->problem->dataflow_fun) (dflow, blocks_to_consider, blocks_to_init,
- postorder, n_blocks, single_pass);
+ if (dflow->problem->dataflow_fun)
+ dflow->problem->dataflow_fun (dflow, blocks_to_consider,
+ postorder, n_blocks);
/* Massage the solution. */
- if (*dflow->problem->finalize_fun)
- (*dflow->problem->finalize_fun) (dflow, blocks_to_consider);
+ if (dflow->problem->finalize_fun)
+ dflow->problem->finalize_fun (blocks_to_consider);
+
+#ifdef ENABLE_DF_CHECKING
+ if (dflow->problem->verify_end_fun)
+ dflow->problem->verify_end_fun ();
+#endif
+
+ timevar_pop (dflow->problem->tv_id);
+
+ dflow->computed = true;
}
BLOCKS, or for the whole CFG if BLOCKS is zero. */
void
-df_analyze (struct df *df)
+df_analyze (void)
{
- int *postorder = xmalloc (sizeof (int) *last_basic_block);
- bitmap current_all_blocks = BITMAP_ALLOC (NULL);
- int n_blocks;
- int i;
+ bitmap current_all_blocks = BITMAP_ALLOC (&df_bitmap_obstack);
bool everything;
+ int i;
- n_blocks = post_order_compute (postorder, true);
-
- if (n_blocks != n_basic_blocks)
- delete_unreachable_blocks ();
-
- for (i = 0; i < n_blocks; i++)
- bitmap_set_bit (current_all_blocks, postorder[i]);
-
- /* No one called df_rescan_blocks, so do it. */
- if (!df->blocks_to_scan)
- df_rescan_blocks (df, NULL);
+ if (df->postorder)
+ free (df->postorder);
+ if (df->postorder_inverted)
+ free (df->postorder_inverted);
+ df->postorder = XNEWVEC (int, last_basic_block);
+ df->postorder_inverted = XNEWVEC (int, last_basic_block);
+ df->n_blocks = post_order_compute (df->postorder, true, true);
+ df->n_blocks_inverted = inverted_post_order_compute (df->postorder_inverted);
+
+ /* These should be the same. */
+ gcc_assert (df->n_blocks == df->n_blocks_inverted);
+
+ /* We need to do this before the df_verify_all because this is
+ not kept incrementally up to date. */
+ df_compute_regs_ever_live (false);
+ df_process_deferred_rescans ();
+
+ if (dump_file)
+ fprintf (dump_file, "df_analyze called\n");
+
+#ifndef ENABLE_DF_CHECKING
+ if (df->changeable_flags & DF_VERIFY_SCHEDULED)
+#endif
+ df_verify ();
+
+ for (i = 0; i < df->n_blocks; i++)
+ bitmap_set_bit (current_all_blocks, df->postorder[i]);
+
+#ifdef ENABLE_CHECKING
+ /* Verify that POSTORDER_INVERTED only contains blocks reachable from
+ the ENTRY block. */
+ for (i = 0; i < df->n_blocks_inverted; i++)
+ gcc_assert (bitmap_bit_p (current_all_blocks, df->postorder_inverted[i]));
+#endif
/* Make sure that we have pruned any unreachable blocks from these
sets. */
- bitmap_and_into (df->blocks_to_scan, current_all_blocks);
-
- if (df->blocks_to_analyze)
+ if (df->analyze_subset)
{
everything = false;
bitmap_and_into (df->blocks_to_analyze, current_all_blocks);
- n_blocks = df_prune_to_subcfg (postorder, n_blocks, df->blocks_to_analyze);
+ df->n_blocks = df_prune_to_subcfg (df->postorder,
+ df->n_blocks, df->blocks_to_analyze);
+ df->n_blocks_inverted = df_prune_to_subcfg (df->postorder_inverted,
+ df->n_blocks_inverted,
+ df->blocks_to_analyze);
BITMAP_FREE (current_all_blocks);
}
else
/* Skip over the DF_SCAN problem. */
for (i = 1; i < df->num_problems_defined; i++)
- df_analyze_problem (df->problems_in_order[i],
- df->blocks_to_analyze, df->blocks_to_analyze,
- df->blocks_to_scan,
- postorder, n_blocks, false);
+ {
+ struct dataflow *dflow = df->problems_in_order[i];
+ if (dflow->solutions_dirty)
+ {
+ if (dflow->problem->dir == DF_FORWARD)
+ df_analyze_problem (dflow,
+ df->blocks_to_analyze,
+ df->postorder_inverted,
+ df->n_blocks_inverted);
+ else
+ df_analyze_problem (dflow,
+ df->blocks_to_analyze,
+ df->postorder,
+ df->n_blocks);
+ }
+ }
if (everything)
{
df->blocks_to_analyze = NULL;
}
- BITMAP_FREE (df->blocks_to_scan);
- df->blocks_to_scan = NULL;
+#ifdef DF_DEBUG_CFG
+ df_set_clean_cfg ();
+#endif
+}
+
+
+/* Return the number of basic blocks from the last call to df_analyze. */
+
+int
+df_get_n_blocks (enum df_flow_dir dir)
+{
+ gcc_assert (dir != DF_NONE);
+
+ if (dir == DF_FORWARD)
+ {
+ gcc_assert (df->postorder_inverted);
+ return df->n_blocks_inverted;
+ }
+
+ gcc_assert (df->postorder);
+ return df->n_blocks;
+}
+
+
+/* Return a pointer to the array of basic blocks in the reverse postorder.
+ Depending on the direction of the dataflow problem,
+ it returns either the usual reverse postorder array
+ or the reverse postorder of inverted traversal. */
+int *
+df_get_postorder (enum df_flow_dir dir)
+{
+ gcc_assert (dir != DF_NONE);
+
+ if (dir == DF_FORWARD)
+ {
+ gcc_assert (df->postorder_inverted);
+ return df->postorder_inverted;
+ }
+ gcc_assert (df->postorder);
+ return df->postorder;
+}
+
+static struct df_problem user_problem;
+static struct dataflow user_dflow;
+
+/* Interface for calling iterative dataflow with user defined
+ confluence and transfer functions. All that is necessary is to
+ supply DIR, a direction, CONF_FUN_0, a confluence function for
+ blocks with no logical preds (or NULL), CONF_FUN_N, the normal
+ confluence function, TRANS_FUN, the basic block transfer function,
+ and BLOCKS, the set of blocks to examine, POSTORDER the blocks in
+ postorder, and N_BLOCKS, the number of blocks in POSTORDER. */
+
+void
+df_simple_dataflow (enum df_flow_dir dir,
+ df_init_function init_fun,
+ df_confluence_function_0 con_fun_0,
+ df_confluence_function_n con_fun_n,
+ df_transfer_function trans_fun,
+ bitmap blocks, int * postorder, int n_blocks)
+{
+ memset (&user_problem, 0, sizeof (struct df_problem));
+ user_problem.dir = dir;
+ user_problem.init_fun = init_fun;
+ user_problem.con_fun_0 = con_fun_0;
+ user_problem.con_fun_n = con_fun_n;
+ user_problem.trans_fun = trans_fun;
+ user_dflow.problem = &user_problem;
+ df_worklist_dataflow (&user_dflow, blocks, postorder, n_blocks);
}
static void *
df_get_bb_info (struct dataflow *dflow, unsigned int index)
{
+ if (dflow->block_info == NULL)
+ return NULL;
+ if (index >= dflow->block_info_size)
+ return NULL;
return (struct df_scan_bb_info *) dflow->block_info[index];
}
/* Set basic block info. */
static void
-df_set_bb_info (struct dataflow *dflow, unsigned int index,
+df_set_bb_info (struct dataflow *dflow, unsigned int index,
void *bb_info)
{
+ gcc_assert (dflow->block_info);
dflow->block_info[index] = bb_info;
}
-/* Called from the rtl_compact_blocks to reorganize the problems basic
- block info. */
+/* Mark the solutions as being out of date. */
-void
-df_compact_blocks (struct df *df)
+void
+df_mark_solutions_dirty (void)
{
- int i, p;
- basic_block bb;
- void **problem_temps;
- int size = last_basic_block *sizeof (void *);
- problem_temps = xmalloc (size);
-
+ if (df)
+ {
+ int p;
+ for (p = 1; p < df->num_problems_defined; p++)
+ df->problems_in_order[p]->solutions_dirty = true;
+ }
+}
+
+
+/* Return true if BB needs it's transfer functions recomputed. */
+
+bool
+df_get_bb_dirty (basic_block bb)
+{
+ if (df && df_live)
+ return bitmap_bit_p (df_live->out_of_date_transfer_functions, bb->index);
+ else
+ return false;
+}
+
+
+/* Mark BB as needing it's transfer functions as being out of
+ date. */
+
+void
+df_set_bb_dirty (basic_block bb)
+{
+ if (df)
+ {
+ int p;
+ for (p = 1; p < df->num_problems_defined; p++)
+ {
+ struct dataflow *dflow = df->problems_in_order[p];
+ if (dflow->out_of_date_transfer_functions)
+ bitmap_set_bit (dflow->out_of_date_transfer_functions, bb->index);
+ }
+ df_mark_solutions_dirty ();
+ }
+}
+
+
+/* Clear the dirty bits. This is called from places that delete
+ blocks. */
+static void
+df_clear_bb_dirty (basic_block bb)
+{
+ int p;
+ for (p = 1; p < df->num_problems_defined; p++)
+ {
+ struct dataflow *dflow = df->problems_in_order[p];
+ if (dflow->out_of_date_transfer_functions)
+ bitmap_clear_bit (dflow->out_of_date_transfer_functions, bb->index);
+ }
+}
+/* Called from the rtl_compact_blocks to reorganize the problems basic
+ block info. */
+
+void
+df_compact_blocks (void)
+{
+ int i, p;
+ basic_block bb;
+ void **problem_temps;
+ int size = last_basic_block * sizeof (void *);
+ bitmap tmp = BITMAP_ALLOC (&df_bitmap_obstack);
+ problem_temps = XNEWVAR (void *, size);
+
for (p = 0; p < df->num_problems_defined; p++)
{
struct dataflow *dflow = df->problems_in_order[p];
- if (*dflow->problem->free_bb_fun)
+
+ /* Need to reorganize the out_of_date_transfer_functions for the
+ dflow problem. */
+ if (dflow->out_of_date_transfer_functions)
+ {
+ bitmap_copy (tmp, dflow->out_of_date_transfer_functions);
+ bitmap_clear (dflow->out_of_date_transfer_functions);
+ if (bitmap_bit_p (tmp, ENTRY_BLOCK))
+ bitmap_set_bit (dflow->out_of_date_transfer_functions, ENTRY_BLOCK);
+ if (bitmap_bit_p (tmp, EXIT_BLOCK))
+ bitmap_set_bit (dflow->out_of_date_transfer_functions, EXIT_BLOCK);
+
+ i = NUM_FIXED_BLOCKS;
+ FOR_EACH_BB (bb)
+ {
+ if (bitmap_bit_p (tmp, bb->index))
+ bitmap_set_bit (dflow->out_of_date_transfer_functions, i);
+ i++;
+ }
+ }
+
+ /* Now shuffle the block info for the problem. */
+ if (dflow->problem->free_bb_fun)
{
df_grow_bb_info (dflow);
memcpy (problem_temps, dflow->block_info, size);
/* Copy the bb info from the problem tmps to the proper
place in the block_info vector. Null out the copied
- item. */
+ item. The entry and exit blocks never move. */
i = NUM_FIXED_BLOCKS;
- FOR_EACH_BB (bb)
+ FOR_EACH_BB (bb)
{
df_set_bb_info (dflow, i, problem_temps[bb->index]);
problem_temps[bb->index] = NULL;
i++;
}
- memset (dflow->block_info + i, 0,
+ memset (dflow->block_info + i, 0,
(last_basic_block - i) *sizeof (void *));
/* Free any block infos that were not copied (and NULLed).
These are from orphaned blocks. */
for (i = NUM_FIXED_BLOCKS; i < last_basic_block; i++)
{
- basic_block bb = BASIC_BLOCK (i);
+ basic_block bb = BASIC_BLOCK (i);
if (problem_temps[i] && bb)
- (*dflow->problem->free_bb_fun)
- (dflow, bb, problem_temps[i]);
+ dflow->problem->free_bb_fun
+ (bb, problem_temps[i]);
}
}
}
+ /* Shuffle the bits in the basic_block indexed arrays. */
+
+ if (df->blocks_to_analyze)
+ {
+ if (bitmap_bit_p (tmp, ENTRY_BLOCK))
+ bitmap_set_bit (df->blocks_to_analyze, ENTRY_BLOCK);
+ if (bitmap_bit_p (tmp, EXIT_BLOCK))
+ bitmap_set_bit (df->blocks_to_analyze, EXIT_BLOCK);
+ bitmap_copy (tmp, df->blocks_to_analyze);
+ bitmap_clear (df->blocks_to_analyze);
+ i = NUM_FIXED_BLOCKS;
+ FOR_EACH_BB (bb)
+ {
+ if (bitmap_bit_p (tmp, bb->index))
+ bitmap_set_bit (df->blocks_to_analyze, i);
+ i++;
+ }
+ }
+
+ BITMAP_FREE (tmp);
+
free (problem_temps);
i = NUM_FIXED_BLOCKS;
- FOR_EACH_BB (bb)
+ FOR_EACH_BB (bb)
{
SET_BASIC_BLOCK (i, bb);
bb->index = i;
for (; i < last_basic_block; i++)
SET_BASIC_BLOCK (i, NULL);
+
+#ifdef DF_DEBUG_CFG
+ if (!df_lr->solutions_dirty)
+ df_set_clean_cfg ();
+#endif
}
-/* Shove NEW_BLOCK in at OLD_INDEX. Called from if-cvt to hack a
+/* Shove NEW_BLOCK in at OLD_INDEX. Called from ifcvt to hack a
block. There is no excuse for people to do this kind of thing. */
-void
-df_bb_replace (struct df *df, int old_index, basic_block new_block)
+void
+df_bb_replace (int old_index, basic_block new_block)
{
+ int new_block_index = new_block->index;
int p;
+ if (dump_file)
+ fprintf (dump_file, "shoving block %d into %d\n", new_block_index, old_index);
+
+ gcc_assert (df);
+ gcc_assert (BASIC_BLOCK (old_index) == NULL);
+
for (p = 0; p < df->num_problems_defined; p++)
{
struct dataflow *dflow = df->problems_in_order[p];
if (dflow->block_info)
{
- void *temp;
-
df_grow_bb_info (dflow);
-
- /* The old switcheroo. */
-
- temp = df_get_bb_info (dflow, old_index);
- df_set_bb_info (dflow, old_index,
- df_get_bb_info (dflow, new_block->index));
- df_set_bb_info (dflow, new_block->index, temp);
+ gcc_assert (df_get_bb_info (dflow, old_index) == NULL);
+ df_set_bb_info (dflow, old_index,
+ df_get_bb_info (dflow, new_block_index));
}
}
+ df_clear_bb_dirty (new_block);
SET_BASIC_BLOCK (old_index, new_block);
new_block->index = old_index;
+ df_set_bb_dirty (BASIC_BLOCK (old_index));
+ SET_BASIC_BLOCK (new_block_index, NULL);
}
-/*----------------------------------------------------------------------------
- PUBLIC INTERFACES TO QUERY INFORMATION.
-----------------------------------------------------------------------------*/
+/* Free all of the per basic block dataflow from all of the problems.
+ This is typically called before a basic block is deleted and the
+ problem will be reanalyzed. */
-/* Return last use of REGNO within BB. */
+void
+df_bb_delete (int bb_index)
+{
+ basic_block bb = BASIC_BLOCK (bb_index);
+ int i;
+
+ if (!df)
+ return;
-struct df_ref *
-df_bb_regno_last_use_find (struct df *df, basic_block bb, unsigned int regno)
+ for (i = 0; i < df->num_problems_defined; i++)
+ {
+ struct dataflow *dflow = df->problems_in_order[i];
+ if (dflow->problem->free_bb_fun)
+ {
+ void *bb_info = df_get_bb_info (dflow, bb_index);
+ if (bb_info)
+ {
+ dflow->problem->free_bb_fun (bb, bb_info);
+ df_set_bb_info (dflow, bb_index, NULL);
+ }
+ }
+ }
+ df_clear_bb_dirty (bb);
+ df_mark_solutions_dirty ();
+}
+
+
+/* Verify that there is a place for everything and everything is in
+ its place. This is too expensive to run after every pass in the
+ mainline. However this is an excellent debugging tool if the
+ dataflow information is not being updated properly. You can just
+ sprinkle calls in until you find the place that is changing an
+ underlying structure without calling the proper updating
+ routine. */
+
+void
+df_verify (void)
{
- rtx insn;
- struct df_ref *use;
+ df_scan_verify ();
+#ifdef ENABLE_DF_CHECKING
+ df_lr_verify_transfer_functions ();
+ if (df_live)
+ df_live_verify_transfer_functions ();
+#endif
+}
- FOR_BB_INSNS_REVERSE (bb, insn)
+#ifdef DF_DEBUG_CFG
+
+/* Compute an array of ints that describes the cfg. This can be used
+ to discover places where the cfg is modified by the appropriate
+ calls have not been made to the keep df informed. The internals of
+ this are unexciting, the key is that two instances of this can be
+ compared to see if any changes have been made to the cfg. */
+
+static int *
+df_compute_cfg_image (void)
+{
+ basic_block bb;
+ int size = 2 + (2 * n_basic_blocks);
+ int i;
+ int * map;
+
+ FOR_ALL_BB (bb)
{
- unsigned int uid = INSN_UID (insn);
- for (use = DF_INSN_UID_GET (df, uid)->uses; use; use = use->next_ref)
- if (DF_REF_REGNO (use) == regno)
- return use;
+ size += EDGE_COUNT (bb->succs);
}
- return NULL;
+
+ map = XNEWVEC (int, size);
+ map[0] = size;
+ i = 1;
+ FOR_ALL_BB (bb)
+ {
+ edge_iterator ei;
+ edge e;
+
+ map[i++] = bb->index;
+ FOR_EACH_EDGE (e, ei, bb->succs)
+ map[i++] = e->dest->index;
+ map[i++] = -1;
+ }
+ map[i] = -1;
+ return map;
+}
+
+static int *saved_cfg = NULL;
+
+
+/* This function compares the saved version of the cfg with the
+ current cfg and aborts if the two are identical. The function
+ silently returns if the cfg has been marked as dirty or the two are
+ the same. */
+
+void
+df_check_cfg_clean (void)
+{
+ int *new_map;
+
+ if (!df)
+ return;
+
+ if (df_lr->solutions_dirty)
+ return;
+
+ if (saved_cfg == NULL)
+ return;
+
+ new_map = df_compute_cfg_image ();
+ gcc_assert (memcmp (saved_cfg, new_map, saved_cfg[0] * sizeof (int)) == 0);
+ free (new_map);
}
+/* This function builds a cfg fingerprint and squirrels it away in
+ saved_cfg. */
+
+static void
+df_set_clean_cfg (void)
+{
+ if (saved_cfg)
+ free (saved_cfg);
+ saved_cfg = df_compute_cfg_image ();
+}
+
+#endif /* DF_DEBUG_CFG */
+/*----------------------------------------------------------------------------
+ PUBLIC INTERFACES TO QUERY INFORMATION.
+----------------------------------------------------------------------------*/
+
+
/* Return first def of REGNO within BB. */
-struct df_ref *
-df_bb_regno_first_def_find (struct df *df, basic_block bb, unsigned int regno)
+df_ref
+df_bb_regno_first_def_find (basic_block bb, unsigned int regno)
{
rtx insn;
- struct df_ref *def;
+ df_ref *def_rec;
+ unsigned int uid;
FOR_BB_INSNS (bb, insn)
{
- unsigned int uid = INSN_UID (insn);
- for (def = DF_INSN_UID_GET (df, uid)->defs; def; def = def->next_ref)
- if (DF_REF_REGNO (def) == regno)
- return def;
+ if (!INSN_P (insn))
+ continue;
+
+ uid = INSN_UID (insn);
+ for (def_rec = DF_INSN_UID_DEFS (uid); *def_rec; def_rec++)
+ {
+ df_ref def = *def_rec;
+ if (DF_REF_REGNO (def) == regno)
+ return def;
+ }
}
return NULL;
}
/* Return last def of REGNO within BB. */
-struct df_ref *
-df_bb_regno_last_def_find (struct df *df, basic_block bb, unsigned int regno)
+df_ref
+df_bb_regno_last_def_find (basic_block bb, unsigned int regno)
{
rtx insn;
- struct df_ref *def;
+ df_ref *def_rec;
+ unsigned int uid;
FOR_BB_INSNS_REVERSE (bb, insn)
{
- unsigned int uid = INSN_UID (insn);
+ if (!INSN_P (insn))
+ continue;
- for (def = DF_INSN_UID_GET (df, uid)->defs; def; def = def->next_ref)
- if (DF_REF_REGNO (def) == regno)
- return def;
+ uid = INSN_UID (insn);
+ for (def_rec = DF_INSN_UID_DEFS (uid); *def_rec; def_rec++)
+ {
+ df_ref def = *def_rec;
+ if (DF_REF_REGNO (def) == regno)
+ return def;
+ }
}
return NULL;
}
-/* Return true if INSN defines REGNO. */
-
-bool
-df_insn_regno_def_p (struct df *df, rtx insn, unsigned int regno)
-{
- unsigned int uid;
- struct df_ref *def;
-
- uid = INSN_UID (insn);
- for (def = DF_INSN_UID_GET (df, uid)->defs; def; def = def->next_ref)
- if (DF_REF_REGNO (def) == regno)
- return true;
-
- return false;
-}
-
-
/* Finds the reference corresponding to the definition of REG in INSN.
DF is the dataflow object. */
-struct df_ref *
-df_find_def (struct df *df, rtx insn, rtx reg)
+df_ref
+df_find_def (rtx insn, rtx reg)
{
unsigned int uid;
- struct df_ref *def;
+ df_ref *def_rec;
if (GET_CODE (reg) == SUBREG)
reg = SUBREG_REG (reg);
gcc_assert (REG_P (reg));
uid = INSN_UID (insn);
- for (def = DF_INSN_UID_GET (df, uid)->defs; def; def = def->next_ref)
- if (rtx_equal_p (DF_REF_REAL_REG (def), reg))
- return def;
+ for (def_rec = DF_INSN_UID_DEFS (uid); *def_rec; def_rec++)
+ {
+ df_ref def = *def_rec;
+ if (rtx_equal_p (DF_REF_REAL_REG (def), reg))
+ return def;
+ }
return NULL;
}
-/* Return true if REG is defined in INSN, zero otherwise. */
+/* Return true if REG is defined in INSN, zero otherwise. */
bool
-df_reg_defined (struct df *df, rtx insn, rtx reg)
+df_reg_defined (rtx insn, rtx reg)
{
- return df_find_def (df, insn, reg) != NULL;
+ return df_find_def (insn, reg) != NULL;
}
-
+
/* Finds the reference corresponding to the use of REG in INSN.
DF is the dataflow object. */
-
-struct df_ref *
-df_find_use (struct df *df, rtx insn, rtx reg)
+
+df_ref
+df_find_use (rtx insn, rtx reg)
{
unsigned int uid;
- struct df_ref *use;
+ df_ref *use_rec;
if (GET_CODE (reg) == SUBREG)
reg = SUBREG_REG (reg);
gcc_assert (REG_P (reg));
uid = INSN_UID (insn);
- for (use = DF_INSN_UID_GET (df, uid)->uses; use; use = use->next_ref)
- if (rtx_equal_p (DF_REF_REAL_REG (use), reg))
- return use;
-
+ for (use_rec = DF_INSN_UID_USES (uid); *use_rec; use_rec++)
+ {
+ df_ref use = *use_rec;
+ if (rtx_equal_p (DF_REF_REAL_REG (use), reg))
+ return use;
+ }
+ if (df->changeable_flags & DF_EQ_NOTES)
+ for (use_rec = DF_INSN_UID_EQ_USES (uid); *use_rec; use_rec++)
+ {
+ df_ref use = *use_rec;
+ if (rtx_equal_p (DF_REF_REAL_REG (use), reg))
+ return use;
+ }
return NULL;
}
-/* Return true if REG is referenced in INSN, zero otherwise. */
+/* Return true if REG is referenced in INSN, zero otherwise. */
bool
-df_reg_used (struct df *df, rtx insn, rtx reg)
+df_reg_used (rtx insn, rtx reg)
{
- return df_find_use (df, insn, reg) != NULL;
+ return df_find_use (insn, reg) != NULL;
}
-
+
\f
/*----------------------------------------------------------------------------
Debugging and printing functions.
----------------------------------------------------------------------------*/
+
+/* Write information about registers and basic blocks into FILE.
+ This is part of making a debugging dump. */
+
+void
+df_print_regset (FILE *file, bitmap r)
+{
+ unsigned int i;
+ bitmap_iterator bi;
+
+ if (r == NULL)
+ fputs (" (nil)", file);
+ else
+ {
+ EXECUTE_IF_SET_IN_BITMAP (r, 0, i, bi)
+ {
+ fprintf (file, " %d", i);
+ if (i < FIRST_PSEUDO_REGISTER)
+ fprintf (file, " [%s]", reg_names[i]);
+ }
+ }
+ fprintf (file, "\n");
+}
+
+
+/* Write information about registers and basic blocks into FILE. The
+ bitmap is in the form used by df_byte_lr. This is part of making a
+ debugging dump. */
+
+void
+df_print_byte_regset (FILE *file, bitmap r)
+{
+ unsigned int max_reg = max_reg_num ();
+ bitmap_iterator bi;
+
+ if (r == NULL)
+ fputs (" (nil)", file);
+ else
+ {
+ unsigned int i;
+ for (i = 0; i < max_reg; i++)
+ {
+ unsigned int first = df_byte_lr_get_regno_start (i);
+ unsigned int len = df_byte_lr_get_regno_len (i);
+
+ if (len > 1)
+ {
+ bool found = false;
+ unsigned int j;
+
+ EXECUTE_IF_SET_IN_BITMAP (r, first, j, bi)
+ {
+ found = j < first + len;
+ break;
+ }
+ if (found)
+ {
+ const char * sep = "";
+ fprintf (file, " %d", i);
+ if (i < FIRST_PSEUDO_REGISTER)
+ fprintf (file, " [%s]", reg_names[i]);
+ fprintf (file, "(");
+ EXECUTE_IF_SET_IN_BITMAP (r, first, j, bi)
+ {
+ if (j > first + len - 1)
+ break;
+ fprintf (file, "%s%d", sep, j-first);
+ sep = ", ";
+ }
+ fprintf (file, ")");
+ }
+ }
+ else
+ {
+ if (bitmap_bit_p (r, first))
+ {
+ fprintf (file, " %d", i);
+ if (i < FIRST_PSEUDO_REGISTER)
+ fprintf (file, " [%s]", reg_names[i]);
+ }
+ }
+
+ }
+ }
+ fprintf (file, "\n");
+}
+
+
/* Dump dataflow info. */
+
+void
+df_dump (FILE *file)
+{
+ basic_block bb;
+ df_dump_start (file);
+
+ FOR_ALL_BB (bb)
+ {
+ df_print_bb_index (bb, file);
+ df_dump_top (bb, file);
+ df_dump_bottom (bb, file);
+ }
+
+ fprintf (file, "\n");
+}
+
+
+/* Dump dataflow info for df->blocks_to_analyze. */
+
+void
+df_dump_region (FILE *file)
+{
+ if (df->blocks_to_analyze)
+ {
+ bitmap_iterator bi;
+ unsigned int bb_index;
+
+ fprintf (file, "\n\nstarting region dump\n");
+ df_dump_start (file);
+
+ EXECUTE_IF_SET_IN_BITMAP (df->blocks_to_analyze, 0, bb_index, bi)
+ {
+ basic_block bb = BASIC_BLOCK (bb_index);
+
+ df_print_bb_index (bb, file);
+ df_dump_top (bb, file);
+ df_dump_bottom (bb, file);
+ }
+ fprintf (file, "\n");
+ }
+ else
+ df_dump (file);
+}
+
+
+/* Dump the introductory information for each problem defined. */
+
void
-df_dump (struct df *df, FILE *file)
+df_dump_start (FILE *file)
{
int i;
- if (! df || ! file)
+ if (!df || !file)
return;
fprintf (file, "\n\n%s\n", current_function_name ());
fprintf (file, "\nDataflow summary:\n");
- fprintf (file, "def_info->bitmap_size = %d, use_info->bitmap_size = %d\n",
- df->def_info.bitmap_size, df->use_info.bitmap_size);
+ if (df->blocks_to_analyze)
+ fprintf (file, "def_info->table_size = %d, use_info->table_size = %d\n",
+ DF_DEFS_TABLE_SIZE (), DF_USES_TABLE_SIZE ());
for (i = 0; i < df->num_problems_defined; i++)
- (*df->problems_in_order[i]->problem->dump_fun) (df->problems_in_order[i], file);
+ {
+ struct dataflow *dflow = df->problems_in_order[i];
+ if (dflow->computed)
+ {
+ df_dump_problem_function fun = dflow->problem->dump_start_fun;
+ if (fun)
+ fun(file);
+ }
+ }
+}
- fprintf (file, "\n");
+
+/* Dump the top of the block information for BB. */
+
+void
+df_dump_top (basic_block bb, FILE *file)
+{
+ int i;
+
+ if (!df || !file)
+ return;
+
+ for (i = 0; i < df->num_problems_defined; i++)
+ {
+ struct dataflow *dflow = df->problems_in_order[i];
+ if (dflow->computed)
+ {
+ df_dump_bb_problem_function bbfun = dflow->problem->dump_top_fun;
+ if (bbfun)
+ bbfun (bb, file);
+ }
+ }
}
+/* Dump the bottom of the block information for BB. */
+
void
-df_refs_chain_dump (struct df *df, struct df_ref *ref,
- bool follow_chain, FILE *file)
+df_dump_bottom (basic_block bb, FILE *file)
+{
+ int i;
+
+ if (!df || !file)
+ return;
+
+ for (i = 0; i < df->num_problems_defined; i++)
+ {
+ struct dataflow *dflow = df->problems_in_order[i];
+ if (dflow->computed)
+ {
+ df_dump_bb_problem_function bbfun = dflow->problem->dump_bottom_fun;
+ if (bbfun)
+ bbfun (bb, file);
+ }
+ }
+}
+
+
+void
+df_refs_chain_dump (df_ref *ref_rec, bool follow_chain, FILE *file)
{
fprintf (file, "{ ");
- while (ref)
+ while (*ref_rec)
{
- fprintf (file, "%c%d(%d) ",
- DF_REF_REG_DEF_P (ref) ? 'd' : 'u',
+ df_ref ref = *ref_rec;
+ fprintf (file, "%c%d(%d)",
+ DF_REF_REG_DEF_P (ref) ? 'd' : (DF_REF_FLAGS (ref) & DF_REF_IN_NOTE) ? 'e' : 'u',
DF_REF_ID (ref),
DF_REF_REGNO (ref));
if (follow_chain)
- df_chain_dump (df, DF_REF_CHAIN (ref), file);
- ref = ref->next_ref;
+ df_chain_dump (DF_REF_CHAIN (ref), file);
+ ref_rec++;
}
fprintf (file, "}");
}
/* Dump either a ref-def or reg-use chain. */
void
-df_regs_chain_dump (struct df *df ATTRIBUTE_UNUSED, struct df_ref *ref, FILE *file)
+df_regs_chain_dump (df_ref ref, FILE *file)
{
fprintf (file, "{ ");
while (ref)
DF_REF_REG_DEF_P (ref) ? 'd' : 'u',
DF_REF_ID (ref),
DF_REF_REGNO (ref));
- ref = ref->next_reg;
+ ref = DF_REF_NEXT_REG (ref);
}
fprintf (file, "}");
}
-void
-df_insn_debug (struct df *df, rtx insn, bool follow_chain, FILE *file)
+static void
+df_mws_dump (struct df_mw_hardreg **mws, FILE *file)
{
- unsigned int uid;
- int bbi;
+ while (*mws)
+ {
+ fprintf (file, "mw %c r[%d..%d]\n",
+ (DF_MWS_REG_DEF_P (*mws)) ? 'd' : 'u',
+ (*mws)->start_regno, (*mws)->end_regno);
+ mws++;
+ }
+}
- uid = INSN_UID (insn);
- if (DF_INSN_UID_DEFS (df, uid))
- bbi = DF_REF_BBNO (DF_INSN_UID_DEFS (df, uid));
- else if (DF_INSN_UID_USES(df, uid))
- bbi = DF_REF_BBNO (DF_INSN_UID_USES (df, uid));
- else
- bbi = -1;
+static void
+df_insn_uid_debug (unsigned int uid,
+ bool follow_chain, FILE *file)
+{
+ fprintf (file, "insn %d luid %d",
+ uid, DF_INSN_UID_LUID (uid));
- fprintf (file, "insn %d bb %d luid %d defs ",
- uid, bbi, DF_INSN_LUID (df, insn));
+ if (DF_INSN_UID_DEFS (uid))
+ {
+ fprintf (file, " defs ");
+ df_refs_chain_dump (DF_INSN_UID_DEFS (uid), follow_chain, file);
+ }
+
+ if (DF_INSN_UID_USES (uid))
+ {
+ fprintf (file, " uses ");
+ df_refs_chain_dump (DF_INSN_UID_USES (uid), follow_chain, file);
+ }
- df_refs_chain_dump (df, DF_INSN_UID_DEFS (df, uid), follow_chain, file);
- fprintf (file, " defs ");
- df_refs_chain_dump (df, DF_INSN_UID_USES (df, uid), follow_chain, file);
+ if (DF_INSN_UID_EQ_USES (uid))
+ {
+ fprintf (file, " eq uses ");
+ df_refs_chain_dump (DF_INSN_UID_EQ_USES (uid), follow_chain, file);
+ }
+
+ if (DF_INSN_UID_MWS (uid))
+ {
+ fprintf (file, " mws ");
+ df_mws_dump (DF_INSN_UID_MWS (uid), file);
+ }
fprintf (file, "\n");
}
+
void
-df_insn_debug_regno (struct df *df, rtx insn, FILE *file)
+df_insn_debug (rtx insn, bool follow_chain, FILE *file)
{
- unsigned int uid;
- int bbi;
+ df_insn_uid_debug (INSN_UID (insn), follow_chain, file);
+}
- uid = INSN_UID (insn);
- if (DF_INSN_UID_DEFS (df, uid))
- bbi = DF_REF_BBNO (DF_INSN_UID_DEFS (df, uid));
- else if (DF_INSN_UID_USES(df, uid))
- bbi = DF_REF_BBNO (DF_INSN_UID_USES (df, uid));
- else
- bbi = -1;
+void
+df_insn_debug_regno (rtx insn, FILE *file)
+{
+ struct df_insn_info *insn_info = DF_INSN_INFO_GET (insn);
fprintf (file, "insn %d bb %d luid %d defs ",
- uid, bbi, DF_INSN_LUID (df, insn));
- df_regs_chain_dump (df, DF_INSN_UID_DEFS (df, uid), file);
-
+ INSN_UID (insn), BLOCK_FOR_INSN (insn)->index,
+ DF_INSN_INFO_LUID (insn_info));
+ df_refs_chain_dump (DF_INSN_INFO_DEFS (insn_info), false, file);
+
fprintf (file, " uses ");
- df_regs_chain_dump (df, DF_INSN_UID_USES (df, uid), file);
+ df_refs_chain_dump (DF_INSN_INFO_USES (insn_info), false, file);
+
+ fprintf (file, " eq_uses ");
+ df_refs_chain_dump (DF_INSN_INFO_EQ_USES (insn_info), false, file);
fprintf (file, "\n");
}
void
-df_regno_debug (struct df *df, unsigned int regno, FILE *file)
+df_regno_debug (unsigned int regno, FILE *file)
{
fprintf (file, "reg %d defs ", regno);
- df_regs_chain_dump (df, DF_REG_DEF_GET (df, regno)->reg_chain, file);
+ df_regs_chain_dump (DF_REG_DEF_CHAIN (regno), file);
fprintf (file, " uses ");
- df_regs_chain_dump (df, DF_REG_USE_GET (df, regno)->reg_chain, file);
+ df_regs_chain_dump (DF_REG_USE_CHAIN (regno), file);
+ fprintf (file, " eq_uses ");
+ df_regs_chain_dump (DF_REG_EQ_USE_CHAIN (regno), file);
fprintf (file, "\n");
}
void
-df_ref_debug (struct df *df, struct df_ref *ref, FILE *file)
+df_ref_debug (df_ref ref, FILE *file)
{
fprintf (file, "%c%d ",
DF_REF_REG_DEF_P (ref) ? 'd' : 'u',
DF_REF_ID (ref));
- fprintf (file, "reg %d bb %d luid %d insn %d chain ",
+ fprintf (file, "reg %d bb %d insn %d flag 0x%x type 0x%x ",
DF_REF_REGNO (ref),
DF_REF_BBNO (ref),
- DF_REF_INSN (ref) ? DF_INSN_LUID (df, DF_REF_INSN (ref)) : -1,
- DF_REF_INSN (ref) ? INSN_UID (DF_REF_INSN (ref)) : -1);
- df_chain_dump (df, DF_REF_CHAIN (ref), file);
+ DF_REF_IS_ARTIFICIAL (ref) ? -1 : DF_REF_INSN_UID (ref),
+ DF_REF_FLAGS (ref),
+ DF_REF_TYPE (ref));
+ if (DF_REF_LOC (ref))
+ {
+ if (flag_dump_noaddr)
+ fprintf (file, "loc #(#) chain ");
+ else
+ fprintf (file, "loc %p(%p) chain ", (void *)DF_REF_LOC (ref),
+ (void *)*DF_REF_LOC (ref));
+ }
+ else
+ fprintf (file, "chain ");
+ df_chain_dump (DF_REF_CHAIN (ref), file);
fprintf (file, "\n");
}
\f
void
debug_df_insn (rtx insn)
{
- df_insn_debug (ddf, insn, true, stderr);
+ df_insn_debug (insn, true, stderr);
debug_rtx (insn);
}
void
debug_df_reg (rtx reg)
{
- df_regno_debug (ddf, REGNO (reg), stderr);
+ df_regno_debug (REGNO (reg), stderr);
}
void
debug_df_regno (unsigned int regno)
{
- df_regno_debug (ddf, regno, stderr);
+ df_regno_debug (regno, stderr);
}
void
-debug_df_ref (struct df_ref *ref)
+debug_df_ref (df_ref ref)
{
- df_ref_debug (ddf, ref, stderr);
+ df_ref_debug (ref, stderr);
}
void
debug_df_defno (unsigned int defno)
{
- df_ref_debug (ddf, DF_DEFS_GET (ddf, defno), stderr);
+ df_ref_debug (DF_DEFS_GET (defno), stderr);
}
void
debug_df_useno (unsigned int defno)
{
- df_ref_debug (ddf, DF_USES_GET (ddf, defno), stderr);
+ df_ref_debug (DF_USES_GET (defno), stderr);
}
void
debug_df_chain (struct df_link *link)
{
- df_chain_dump (ddf, link, stderr);
+ df_chain_dump (link, stderr);
fputc ('\n', stderr);
}