/* Compiler driver program that can handle many languages.
Copyright (C) 1987, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
- 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
+ 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009,
+ 2010, 2011
Free Software Foundation, Inc.
This file is part of GCC.
Once it knows which kind of compilation to perform, the procedure for
compilation is specified by a string called a "spec". */
-/* A Short Introduction to Adding a Command-Line Option.
-
- Before adding a command-line option, consider if it is really
- necessary. Each additional command-line option adds complexity and
- is difficult to remove in subsequent versions.
-
- In the following, consider adding the command-line argument
- `--bar'.
-
- 1. Each command-line option is specified in the specs file. The
- notation is described below in the comment entitled "The Specs
- Language". Read it.
-
- 2. In this file, add an entry to "option_map" equating the long
- `--' argument version and any shorter, single letter version. Read
- the comments in the declaration of "struct option_map" for an
- explanation. Do not omit the first `-'.
-
- 3. Look in the "specs" file to determine which program or option
- list should be given the argument, e.g., "cc1_options". Add the
- appropriate syntax for the shorter option version to the
- corresponding "const char *" entry in this file. Omit the first
- `-' from the option. For example, use `-bar', rather than `--bar'.
-
- 4. If the argument takes an argument, e.g., `--baz argument1',
- modify either DEFAULT_SWITCH_TAKES_ARG or
- DEFAULT_WORD_SWITCH_TAKES_ARG in gcc.h. Omit the first `-'
- from `--baz'.
-
- 5. Document the option in this file's display_help(). If the
- option is passed to a subprogram, modify its corresponding
- function, e.g., cppinit.c:print_help() or toplev.c:display_help(),
- instead.
-
- 6. Compile and test. Make sure that your new specs file is being
- read. For example, use a debugger to investigate the value of
- "specs_file" in main(). */
-
#include "config.h"
#include "system.h"
#include "coretypes.h"
#include "multilib.h" /* before tm.h */
#include "tm.h"
-#include <signal.h>
-#if ! defined( SIGCHLD ) && defined( SIGCLD )
-# define SIGCHLD SIGCLD
-#endif
#include "xregex.h"
#include "obstack.h"
#include "intl.h"
#include "prefix.h"
#include "gcc.h"
+#include "diagnostic.h"
#include "flags.h"
#include "opts.h"
-
-#ifdef HAVE_MMAP_FILE
-# include <sys/mman.h>
-# ifdef HAVE_MINCORE
-/* This is on Solaris. */
-# include <sys/types.h>
-# endif
-#endif
-
-#ifndef MAP_FAILED
-# define MAP_FAILED ((void *)-1)
-#endif
+#include "vec.h"
+#include "filenames.h"
/* By default there is no special suffix for target executables. */
/* FIXME: when autoconf is fixed, remove the host check - dj */
#define LIBRARY_PATH_ENV "LIBRARY_PATH"
#endif
-#ifndef HAVE_KILL
-#define kill(p,s) raise(s)
-#endif
-
/* If a stage of compilation returns an exit status >= 1,
compilation of that file ceases. */
/* Flag set to nonzero if an @file argument has been supplied to gcc. */
static bool at_file_supplied;
-/* Flag saying to pass the greatest exit code returned by a sub-process
- to the calling program. */
-static int pass_exit_codes;
-
/* Definition of string containing the arguments given to configure. */
#include "configargs.h"
-/* Flag saying to print the directories gcc will search through looking for
- programs, libraries, etc. */
-
-static int print_search_dirs;
-
-/* Flag saying to print the full filename of this file
- as found through our usual search mechanism. */
-
-static const char *print_file_name = NULL;
-
-/* As print_file_name, but search for executable file. */
-
-static const char *print_prog_name = NULL;
-
-/* Flag saying to print the relative path we'd use to
- find libgcc.a given the current compiler flags. */
-
-static int print_multi_directory;
-
-static int print_sysroot;
-
-/* Flag saying to print the relative path we'd use to
- find OS libraries given the current compiler flags. */
-
-static int print_multi_os_directory;
-
-/* Flag saying to print the list of subdirectories and
- compiler flags used to select them in a standard form. */
-
-static int print_multi_lib;
-
/* Flag saying to print the command line options understood by gcc and its
sub-processes. */
static int print_version;
-/* Flag saying to print the sysroot suffix used for searching for
- headers. */
-
-static int print_sysroot_headers_suffix;
-
-/* Flag indicating whether we should print the command and arguments */
-
-static int verbose_flag;
-
/* Flag indicating whether we should ONLY print the command and
arguments (like verbose_flag) without executing the command.
Displayed arguments are quoted so that the generated command
static int print_subprocess_help;
-/* Flag indicating whether we should report subprocess execution times
- (if this is supported by the system - see pexecute.c). */
-
-static int report_times;
-
/* Whether we should report subprocess execution times to a file. */
FILE *report_times_to_file = NULL;
static char *save_temps_prefix = 0;
static size_t save_temps_length = 0;
-/* Nonzero means pass multiple source files to the compiler at one time. */
-
-static int combine_flag = 0;
-
-/* Nonzero means use pipes to communicate between subprocesses.
- Overridden by either of the above two flags. */
-
-static int use_pipes;
-
/* The compiler version. */
static const char *compiler_version;
-/* The target version specified with -V */
+/* The target version. */
static const char *const spec_version = DEFAULT_TARGET_VERSION;
-/* The target machine specified with -b. */
+/* The target machine. */
static const char *spec_machine = DEFAULT_TARGET_MACHINE;
static const char *cross_compile = "0";
#endif
-#ifdef MODIFY_TARGET_NAME
-
-/* Information on how to alter the target name based on a command-line
- switch. The only case we support now is simply appending or deleting a
- string to or from the end of the first part of the configuration name. */
-
-enum add_del {ADD, DELETE};
-
-static const struct modify_target
-{
- const char *const sw;
- const enum add_del add_del;
- const char *const str;
-}
-modify_target[] = MODIFY_TARGET_NAME;
-#endif
-
-/* The number of errors that have occurred; the link phase will not be
- run if this is nonzero. */
-static int error_count = 0;
-
/* Greatest exit code of sub-processes that has been encountered up to
now. */
static int greatest_status = 1;
static struct obstack collect_obstack;
-/* This is a list of a wrapper program and its arguments.
- e.g. wrapper_string of "strace,-c"
- will cause all programs to run as
- strace -c program arguments
- instead of just
- program arguments */
-static const char *wrapper_string;
-
/* Forward declaration for prototypes. */
struct path_prefix;
struct prefix_list;
int, int, int);
static void add_sysrooted_prefix (struct path_prefix *, const char *,
const char *, int, int, int);
-static void translate_options (int *, const char *const **);
static char *skip_whitespace (char *);
static void delete_if_ordinary (const char *);
static void delete_temp_files (void);
static void set_multilib_dir (void);
static void print_multilib_info (void);
static void perror_with_name (const char *);
-static void fatal_ice (const char *, ...) ATTRIBUTE_PRINTF_1 ATTRIBUTE_NORETURN;
-static void notice (const char *, ...) ATTRIBUTE_PRINTF_1;
static void display_help (void);
static void add_preprocessor_option (const char *, int);
static void add_assembler_option (const char *, int);
static void add_linker_option (const char *, int);
-static void process_command (int, const char **);
+static void process_command (unsigned int, struct cl_decoded_option *);
static int execute (void);
static void alloc_args (void);
static void clear_args (void);
-static void fatal_error (int);
+static void fatal_signal (int);
#if defined(ENABLE_SHARED_LIBGCC) && !defined(REAL_LIBGCC_SPEC)
static void init_gcc_specs (struct obstack *, const char *, const char *,
const char *);
static const char *if_exists_spec_function (int, const char **);
static const char *if_exists_else_spec_function (int, const char **);
static const char *replace_outfile_spec_function (int, const char **);
+static const char *remove_outfile_spec_function (int, const char **);
static const char *version_compare_spec_function (int, const char **);
static const char *include_spec_function (int, const char **);
+static const char *find_file_spec_function (int, const char **);
+static const char *find_plugindir_spec_function (int, const char **);
static const char *print_asm_header_spec_function (int, const char **);
static const char *compare_debug_dump_opt_spec_function (int, const char **);
static const char *compare_debug_self_opt_spec_function (int, const char **);
static const char *compare_debug_auxbase_opt_spec_function (int, const char **);
+static const char *pass_through_libs_spec_func (int, const char **);
\f
/* The Specs Language
Note - this command is position dependent. % commands in the
spec string before this one will see -S, % commands in the
spec string after this one will not.
+ %>S Similar to "%<S", but keep it in the GCC command line.
%<S* remove all occurrences of all switches beginning with -S from the
command line.
%:function(args)
#define MFLIB_SPEC "%{fmudflap|fmudflapth: -export-dynamic}"
#endif
+/* When using -fsplit-stack we need to wrap pthread_create, in order
+ to initialize the stack guard. We always use wrapping, rather than
+ shared library ordering, and we keep the wrapper function in
+ libgcc. This is not yet a real spec, though it could become one;
+ it is currently just stuffed into LINK_SPEC. FIXME: This wrapping
+ only works with GNU ld and gold. FIXME: This is incompatible with
+ -fmudflap when linking statically, which wants to do its own
+ wrapping. */
+#define STACK_SPLIT_SPEC " %{fsplit-stack: --wrap=pthread_create}"
+
/* config.h can define LIBGCC_SPEC to override how and when libgcc.a is
included. */
#ifndef LIBGCC_SPEC
"%{!shared:%{pg:gcrt0%O%s}%{!pg:%{p:mcrt0%O%s}%{!p:crt0%O%s}}}"
#endif
-/* config.h can define SWITCHES_NEED_SPACES to control which options
- require spaces between the option and the argument.
-
- We define SWITCHES_NEED_SPACES to include "o" by default. This
- causes "-ofoo.o" to be split into "-o foo.o" during the initial
- processing of the command-line, before being seen by the specs
- machinery. This makes sure we record "foo.o" as the temporary file
- to be deleted in the case of error, rather than "-ofoo.o". */
-#ifndef SWITCHES_NEED_SPACES
-#define SWITCHES_NEED_SPACES "o"
-#endif
-
/* config.h can define ENDFILE_SPEC to override the default crtn files. */
#ifndef ENDFILE_SPEC
#define ENDFILE_SPEC ""
# endif
#endif
+/* Conditional to test whether the LTO plugin is used or not.
+ FIXME: For slim LTO we will need to enable plugin unconditionally. This
+ still cause problems with PLUGIN_LD != LD and when plugin is built but
+ not useable. For GCC 4.6 we don't support slim LTO and thus we can enable
+ plugin only when LTO is enabled. We still honor explicit
+ -fuse-linker-plugin if the linker used understands -plugin. */
+
+/* The linker has some plugin support. */
+#if HAVE_LTO_PLUGIN > 0
+/* The linker used has full plugin support, use LTO plugin by default. */
+#if HAVE_LTO_PLUGIN == 2
+#define PLUGIN_COND "!fno-use-linker-plugin:%{flto|flto=*|fuse-linker-plugin"
+#define PLUGIN_COND_CLOSE "}"
+#else
+/* The linker used has limited plugin support, use LTO plugin with explicit
+ -fuse-linker-plugin. */
+#define PLUGIN_COND "fuse-linker-plugin"
+#define PLUGIN_COND_CLOSE ""
+#endif
+#define LINK_PLUGIN_SPEC \
+ "%{"PLUGIN_COND": \
+ -plugin %(linker_plugin_file) \
+ -plugin-opt=%(lto_wrapper) \
+ -plugin-opt=-fresolution=%u.res \
+ %{!nostdlib:%{!nodefaultlibs:%:pass-through-libs(%(link_gcc_c_sequence))}} \
+ }"PLUGIN_COND_CLOSE
+#else
+/* The linker used doesn't support -plugin, reject -fuse-linker-plugin. */
+#define LINK_PLUGIN_SPEC "%{fuse-linker-plugin:\
+ %e-fuse-linker-plugin is not supported in this configuration}"
+#endif
+
/* -u* was put back because both BSD and SysV seem to support it. */
/* %{static:} simply prevents an error message if the target machine
/* We want %{T*} after %{L*} and %D so that it can be used to specify linker
scripts which exist in user specified directories, or in standard
directories. */
-/* We pass any -flto and -fwhopr flags on to the linker, which is expected
+/* We pass any -flto flags on to the linker, which is expected
to understand them. In practice, this means it had better be collect2. */
+/* %{e*} includes -export-dynamic; see comment in common.opt. */
#ifndef LINK_COMMAND_SPEC
#define LINK_COMMAND_SPEC "\
%{!fsyntax-only:%{!c:%{!M:%{!MM:%{!E:%{!S:\
- %(linker) \
- %{fuse-linker-plugin: \
- -plugin %(linker_plugin_file) \
- -plugin-opt=%(lto_wrapper) \
- -plugin-opt=%(lto_gcc) \
- %{static|static-libgcc:-plugin-opt=-pass-through=%(lto_libgcc)} \
- %{static:-plugin-opt=-pass-through=-lc} \
- %{O*:-plugin-opt=-O%*} \
- %{w:-plugin-opt=-w} \
- %{f*:-plugin-opt=-f%*} \
- } \
- %{flto} %{fwhopr} %l " LINK_PIE_SPEC \
- "%X %{o*} %{A} %{d} %{e*} %{m} %{N} %{n} %{r}\
- %{s} %{t} %{u*} %{x} %{z} %{Z} %{!A:%{!nostdlib:%{!nostartfiles:%S}}}\
+ %(linker) " \
+ LINK_PLUGIN_SPEC \
+ "%{flto|flto=*:%<fcompare-debug*} \
+ %{flto} %{flto=*} %l " LINK_PIE_SPEC \
+ "%X %{o*} %{e*} %{N} %{n} %{r}\
+ %{s} %{t} %{u*} %{z} %{Z} %{!nostdlib:%{!nostartfiles:%S}}\
%{static:} %{L*} %(mfwrap) %(link_libgcc) %o\
- %{fopenmp|ftree-parallelize-loops=*:%:include(libgomp.spec)%(link_gomp)} %(mflib)\
+ %{fopenmp|ftree-parallelize-loops=*:%:include(libgomp.spec)%(link_gomp)}\
+ %(mflib) " STACK_SPLIT_SPEC "\
%{fprofile-arcs|fprofile-generate*|coverage:-lgcov}\
%{!nostdlib:%{!nodefaultlibs:%(link_ssp) %(link_gcc_c_sequence)}}\
- %{!A:%{!nostdlib:%{!nostartfiles:%E}}} %{T*} }}}}}}"
+ %{!nostdlib:%{!nostartfiles:%E}} %{T*} }}}}}}"
#endif
#ifndef LINK_LIBGCC_SPEC
static const char *libgcc_spec = LIBGCC_SPEC;
static const char *endfile_spec = ENDFILE_SPEC;
static const char *startfile_spec = STARTFILE_SPEC;
-static const char *switches_need_spaces = SWITCHES_NEED_SPACES;
static const char *linker_name_spec = LINKER_NAME;
static const char *linker_plugin_file_spec = "";
static const char *lto_wrapper_spec = "";
static const char *lto_gcc_spec = "";
-static const char *lto_libgcc_spec = "";
static const char *link_command_spec = LINK_COMMAND_SPEC;
static const char *link_libgcc_spec = LINK_LIBGCC_SPEC;
static const char *startfile_prefix_spec = STARTFILE_PREFIX_SPEC;
call cc1 (or cc1obj in objc/lang-specs.h) from the main specs so
that we default the front end language better. */
static const char *trad_capable_cpp =
-"cc1 -E %{traditional|ftraditional|traditional-cpp:-traditional-cpp}";
+"cc1 -E %{traditional|traditional-cpp:-traditional-cpp}";
/* We don't wrap .d files in %W{} since a missing .d file, and
therefore no dependency entry, confuses make into thinking a .o
file that happens to exist is up-to-date. */
static const char *cpp_unique_options =
-"%{C|CC:%{!E:%eGCC does not support -C or -CC without -E}}\
- %{!Q:-quiet} %{nostdinc*} %{C} %{CC} %{v} %{I*&F*} %{P} %I\
+"%{!Q:-quiet} %{nostdinc*} %{C} %{CC} %{v} %{I*&F*} %{P} %I\
%{MD:-MD %{!o:%b.d}%{o*:%.d%*}}\
%{MMD:-MMD %{!o:%b.d}%{o*:%.d%*}}\
%{M} %{MM} %{MF*} %{MG} %{MP} %{MQ*} %{MT*}\
%{!E:%{!M:%{!MM:%{!MT:%{!MQ:%{MD|MMD:%{o*:-MQ %*}}}}}}}\
%{remap} %{g3|ggdb3|gstabs3|gcoff3|gxcoff3|gvms3:-dD}\
+ %{!iplugindir*:%{fplugin*:%:find-plugindir()}}\
%{H} %C %{D*&U*&A*} %{i*} %Z %i\
%{fmudflap:-D_MUDFLAP -include mf-runtime.h}\
%{fmudflapth:-D_MUDFLAP -D_MUDFLAPTH -include mf-runtime.h}\
/* NB: This is shared amongst all front-ends, except for Ada. */
static const char *cc1_options =
"%{pg:%{fomit-frame-pointer:%e-pg and -fomit-frame-pointer are incompatible}}\
- %1 %{!Q:-quiet} -dumpbase %B %{d*} %{m*} %{a*}\
+ %{!iplugindir*:%{fplugin*:%:find-plugindir()}}\
+ %1 %{!Q:-quiet} %{!dumpbase:-dumpbase %B} %{d*} %{m*} %{aux-info*}\
%{fcompare-debug-second:%:compare-debug-auxbase-opt(%b)} \
%{!fcompare-debug-second:%{c|S:%{o*:-auxbase-strip %*}%{!o*:-auxbase %b}}}%{!c:%{!S:-auxbase %b}} \
%{g*} %{O*} %{W*&pedantic*} %{w} %{std*&ansi&trigraphs}\
%{v:-version} %{pg:-p} %{p} %{f*} %{undef}\
- %{Qn:-fno-ident} %{--help:--help}\
- %{--target-help:--target-help}\
- %{--help=*:--help=%(VALUE)}\
+ %{Qn:-fno-ident} %{Qy:} %{-help:--help}\
+ %{-target-help:--target-help}\
+ %{-version:--version}\
+ %{-help=*:--help=%*}\
%{!fsyntax-only:%{S:%W{o*}%{!o*:-o %b.s}}}\
%{fsyntax-only:-o %j} %{-param*}\
%{fmudflap|fmudflapth:-fno-builtin -fno-merge-constants}\
%{coverage:-fprofile-arcs -ftest-coverage}";
static const char *asm_options =
-"%{--target-help:%:print-asm-header()} "
+"%{-target-help:%:print-asm-header()} "
#if HAVE_GNU_AS
/* If GNU AS is used, then convert -w (no warnings), -I, and -v
to the assembler equivalents. */
static struct user_specs *user_specs_head, *user_specs_tail;
-#ifndef SWITCH_TAKES_ARG
-#define SWITCH_TAKES_ARG(CHAR) DEFAULT_SWITCH_TAKES_ARG(CHAR)
-#endif
-
-#ifndef WORD_SWITCH_TAKES_ARG
-#define WORD_SWITCH_TAKES_ARG(STR) DEFAULT_WORD_SWITCH_TAKES_ARG (STR)
-#endif
\f
-#ifdef HAVE_TARGET_EXECUTABLE_SUFFIX
-/* This defines which switches stop a full compilation. */
-#define DEFAULT_SWITCH_CURTAILS_COMPILATION(CHAR) \
- ((CHAR) == 'c' || (CHAR) == 'S' || (CHAR) == 'E')
-
-#ifndef SWITCH_CURTAILS_COMPILATION
-#define SWITCH_CURTAILS_COMPILATION(CHAR) \
- DEFAULT_SWITCH_CURTAILS_COMPILATION(CHAR)
-#endif
-#endif
-
/* Record the mapping from file suffixes for compilation specs. */
struct compiler
{".p", "#Pascal", 0, 0, 0}, {".pas", "#Pascal", 0, 0, 0},
{".java", "#Java", 0, 0, 0}, {".class", "#Java", 0, 0, 0},
{".zip", "#Java", 0, 0, 0}, {".jar", "#Java", 0, 0, 0},
+ {".go", "#Go", 0, 1, 0},
/* Next come the entries for C. */
- {".c", "@c", 0, 1, 1},
+ {".c", "@c", 0, 0, 1},
{"@c",
/* cc1 has an integrated ISO C preprocessor. We should invoke the
external preprocessor if -save-temps is given. */
"%{E|M|MM:%(trad_capable_cpp) %(cpp_options) %(cpp_debug_options)}\
%{!E:%{!M:%{!MM:\
- %{traditional|ftraditional:\
+ %{traditional:\
%eGNU C no longer supports -traditional without -E}\
- %{!combine:\
- %{save-temps*|traditional-cpp|no-integrated-cpp:%(trad_capable_cpp) \
- %(cpp_options) -o %{save-temps*:%b.i} %{!save-temps*:%g.i} \n\
- cc1 -fpreprocessed %{save-temps*:%b.i} %{!save-temps*:%g.i} \
- %(cc1_options)}\
- %{!save-temps*:%{!traditional-cpp:%{!no-integrated-cpp:\
- cc1 %(cpp_unique_options) %(cc1_options)}}}\
- %{!fsyntax-only:%(invoke_as)}} \
- %{combine:\
- %{save-temps*|traditional-cpp|no-integrated-cpp:%(trad_capable_cpp) \
- %(cpp_options) -o %{save-temps*:%b.i} %{!save-temps*:%g.i}}\
- %{!save-temps*:%{!traditional-cpp:%{!no-integrated-cpp:\
- cc1 %(cpp_unique_options) %(cc1_options)}}\
- %{!fsyntax-only:%(invoke_as)}}}}}}", 0, 1, 1},
+ %{save-temps*|traditional-cpp|no-integrated-cpp:%(trad_capable_cpp) \
+ %(cpp_options) -o %{save-temps*:%b.i} %{!save-temps*:%g.i} \n\
+ cc1 -fpreprocessed %{save-temps*:%b.i} %{!save-temps*:%g.i} \
+ %(cc1_options)}\
+ %{!save-temps*:%{!traditional-cpp:%{!no-integrated-cpp:\
+ cc1 %(cpp_unique_options) %(cc1_options)}}}\
+ %{!fsyntax-only:%(invoke_as)}}}}", 0, 0, 1},
{"-",
"%{!E:%e-E or -x required when input is from standard input}\
%(trad_capable_cpp) %(cpp_options) %(cpp_debug_options)", 0, 0, 0},
%(cpp_options) -o %{save-temps*:%b.i} %{!save-temps*:%g.i} \n\
cc1 -fpreprocessed %{save-temps*:%b.i} %{!save-temps*:%g.i} \
%(cc1_options)\
- -o %g.s %{!o*:--output-pch=%i.gch}\
- %W{o*:--output-pch=%*}%V}\
+ %{!fdump-ada-spec*:-o %g.s %{!o*:--output-pch=%i.gch}\
+ %W{o*:--output-pch=%*}}%V}\
%{!save-temps*:%{!traditional-cpp:%{!no-integrated-cpp:\
cc1 %(cpp_unique_options) %(cc1_options)\
- -o %g.s %{!o*:--output-pch=%i.gch}\
- %W{o*:--output-pch=%*}%V}}}}}}", 0, 0, 0},
- {".i", "@cpp-output", 0, 1, 0},
+ %{!fdump-ada-spec*:-o %g.s %{!o*:--output-pch=%i.gch}\
+ %W{o*:--output-pch=%*}}%V}}}}}}", 0, 0, 0},
+ {".i", "@cpp-output", 0, 0, 0},
{"@cpp-output",
- "%{!M:%{!MM:%{!E:cc1 -fpreprocessed %i %(cc1_options) %{!fsyntax-only:%(invoke_as)}}}}", 0, 1, 0},
- {".s", "@assembler", 0, 1, 0},
+ "%{!M:%{!MM:%{!E:cc1 -fpreprocessed %i %(cc1_options) %{!fsyntax-only:%(invoke_as)}}}}", 0, 0, 0},
+ {".s", "@assembler", 0, 0, 0},
{"@assembler",
- "%{!M:%{!MM:%{!E:%{!S:as %(asm_debug) %(asm_options) %i %A }}}}", 0, 1, 0},
- {".sx", "@assembler-with-cpp", 0, 1, 0},
- {".S", "@assembler-with-cpp", 0, 1, 0},
+ "%{!M:%{!MM:%{!E:%{!S:as %(asm_debug) %(asm_options) %i %A }}}}", 0, 0, 0},
+ {".sx", "@assembler-with-cpp", 0, 0, 0},
+ {".S", "@assembler-with-cpp", 0, 0, 0},
{"@assembler-with-cpp",
#ifdef AS_NEEDS_DASH_FOR_PIPED_INPUT
"%(trad_capable_cpp) -lang-asm %(cpp_options) -fno-directives-only\
%{!M:%{!MM:%{!E:%{!S:-o %|.s |\n\
as %(asm_debug) %(asm_options) %m.s %A }}}}"
#endif
- , 0, 1, 0},
+ , 0, 0, 0},
#include "specs.h"
/* Mark end of table. */
static const int n_default_compilers = ARRAY_SIZE (default_compilers) - 1;
+typedef char *char_p; /* For DEF_VEC_P. */
+DEF_VEC_P(char_p);
+DEF_VEC_ALLOC_P(char_p,heap);
+
/* A vector of options to give to the linker.
These options are accumulated by %x,
and substituted into the linker command with %X. */
-static int n_linker_options;
-static char **linker_options;
+static VEC(char_p,heap) *linker_options;
/* A vector of options to give to the assembler.
These options are accumulated by -Wa,
and substituted into the assembler command with %Y. */
-static int n_assembler_options;
-static char **assembler_options;
+static VEC(char_p,heap) *assembler_options;
/* A vector of options to give to the preprocessor.
These options are accumulated by -Wp,
and substituted into the preprocessor command with %Z. */
-static int n_preprocessor_options;
-static char **preprocessor_options;
-\f
-/* Define how to map long options into short ones. */
-
-/* This structure describes one mapping. */
-struct option_map
-{
- /* The long option's name. */
- const char *const name;
- /* The equivalent short option. */
- const char *const equivalent;
- /* Argument info. A string of flag chars; NULL equals no options.
- a => argument required.
- o => argument optional.
- j => join argument to equivalent, making one word.
- * => require other text after NAME as an argument. */
- const char *const arg_info;
-};
-
-/* This is the table of mappings. Mappings are tried sequentially
- for each option encountered; the first one that matches, wins. */
-
-static const struct option_map option_map[] =
- {
- {"--all-warnings", "-Wall", 0},
- {"--ansi", "-ansi", 0},
- {"--assemble", "-S", 0},
- {"--assert", "-A", "a"},
- {"--classpath", "-fclasspath=", "aj"},
- {"--bootclasspath", "-fbootclasspath=", "aj"},
- {"--CLASSPATH", "-fclasspath=", "aj"},
- {"--combine", "-combine", 0},
- {"--comments", "-C", 0},
- {"--comments-in-macros", "-CC", 0},
- {"--compile", "-c", 0},
- {"--debug", "-g", "oj"},
- {"--define-macro", "-D", "aj"},
- {"--dependencies", "-M", 0},
- {"--dump", "-d", "a"},
- {"--dumpbase", "-dumpbase", "a"},
- {"--encoding", "-fencoding=", "aj"},
- {"--entry", "-e", 0},
- {"--extra-warnings", "-W", 0},
- {"--extdirs", "-fextdirs=", "aj"},
- {"--for-assembler", "-Wa", "a"},
- {"--for-linker", "-Xlinker", "a"},
- {"--force-link", "-u", "a"},
- {"--coverage", "-coverage", 0},
- {"--imacros", "-imacros", "a"},
- {"--include", "-include", "a"},
- {"--include-barrier", "-I-", 0},
- {"--include-directory", "-I", "aj"},
- {"--include-directory-after", "-idirafter", "a"},
- {"--include-prefix", "-iprefix", "a"},
- {"--include-with-prefix", "-iwithprefix", "a"},
- {"--include-with-prefix-before", "-iwithprefixbefore", "a"},
- {"--include-with-prefix-after", "-iwithprefix", "a"},
- {"--language", "-x", "a"},
- {"--library-directory", "-L", "a"},
- {"--machine", "-m", "aj"},
- {"--machine-", "-m", "*j"},
- {"--no-canonical-prefixes", "-no-canonical-prefixes", 0},
- {"--no-integrated-cpp", "-no-integrated-cpp", 0},
- {"--no-line-commands", "-P", 0},
- {"--no-precompiled-includes", "-noprecomp", 0},
- {"--no-standard-includes", "-nostdinc", 0},
- {"--no-standard-libraries", "-nostdlib", 0},
- {"--no-warnings", "-w", 0},
- {"--optimize", "-O", "oj"},
- {"--output", "-o", "a"},
- {"--output-class-directory", "-foutput-class-dir=", "ja"},
- {"--param", "--param", "a"},
- {"--pass-exit-codes", "-pass-exit-codes", 0},
- {"--pedantic", "-pedantic", 0},
- {"--pedantic-errors", "-pedantic-errors", 0},
- {"--pie", "-pie", 0},
- {"--pipe", "-pipe", 0},
- {"--prefix", "-B", "a"},
- {"--preprocess", "-E", 0},
- {"--print-search-dirs", "-print-search-dirs", 0},
- {"--print-file-name", "-print-file-name=", "aj"},
- {"--print-libgcc-file-name", "-print-libgcc-file-name", 0},
- {"--print-missing-file-dependencies", "-MG", 0},
- {"--print-multi-lib", "-print-multi-lib", 0},
- {"--print-multi-directory", "-print-multi-directory", 0},
- {"--print-multi-os-directory", "-print-multi-os-directory", 0},
- {"--print-prog-name", "-print-prog-name=", "aj"},
- {"--print-sysroot", "-print-sysroot", 0},
- {"--print-sysroot-headers-suffix", "-print-sysroot-headers-suffix", 0},
- {"--profile", "-p", 0},
- {"--profile-blocks", "-a", 0},
- {"--quiet", "-q", 0},
- {"--resource", "-fcompile-resource=", "aj"},
- {"--save-temps", "-save-temps", 0},
- {"--shared", "-shared", 0},
- {"--silent", "-q", 0},
- {"--specs", "-specs=", "aj"},
- {"--static", "-static", 0},
- {"--std", "-std=", "aj"},
- {"--symbolic", "-symbolic", 0},
- {"--sysroot", "--sysroot=", "aj"},
- {"--time", "-time", 0},
- {"--trace-includes", "-H", 0},
- {"--traditional", "-traditional", 0},
- {"--traditional-cpp", "-traditional-cpp", 0},
- {"--trigraphs", "-trigraphs", 0},
- {"--undefine-macro", "-U", "aj"},
- {"--user-dependencies", "-MM", 0},
- {"--verbose", "-v", 0},
- {"--warn-", "-W", "*j"},
- {"--write-dependencies", "-MD", 0},
- {"--write-user-dependencies", "-MMD", 0},
- {"--", "-f", "*j"}
- };
-\f
-
-#ifdef TARGET_OPTION_TRANSLATE_TABLE
-static const struct {
- const char *const option_found;
- const char *const replacements;
-} target_option_translations[] =
-{
- TARGET_OPTION_TRANSLATE_TABLE,
- { 0, 0 }
-};
-#endif
-
-/* Translate the options described by *ARGCP and *ARGVP.
- Make a new vector and store it back in *ARGVP,
- and store its length in *ARGCP. */
-
-static void
-translate_options (int *argcp, const char *const **argvp)
-{
- int i;
- int argc = *argcp;
- const char *const *argv = *argvp;
- int newvsize = (argc + 2) * 2 * sizeof (const char *);
- const char **newv = XNEWVAR (const char *, newvsize);
- int newindex = 0;
-
- i = 0;
- newv[newindex++] = argv[i++];
-
- while (i < argc)
- {
-#ifdef TARGET_OPTION_TRANSLATE_TABLE
- int tott_idx;
-
- for (tott_idx = 0;
- target_option_translations[tott_idx].option_found;
- tott_idx++)
- {
- if (strcmp (target_option_translations[tott_idx].option_found,
- argv[i]) == 0)
- {
- int spaces = 1;
- const char *sp;
- char *np;
-
- for (sp = target_option_translations[tott_idx].replacements;
- *sp; sp++)
- {
- if (*sp == ' ')
- spaces ++;
- }
-
- newvsize += spaces * sizeof (const char *);
- newv = XRESIZEVAR (const char *, newv, newvsize);
-
- sp = target_option_translations[tott_idx].replacements;
- np = xstrdup (sp);
-
- while (1)
- {
- while (*np == ' ')
- np++;
- if (*np == 0)
- break;
- newv[newindex++] = np;
- while (*np != ' ' && *np)
- np++;
- if (*np == 0)
- break;
- *np++ = 0;
- }
-
- i ++;
- break;
- }
- }
- if (target_option_translations[tott_idx].option_found)
- continue;
-#endif
-
- /* Translate -- options. */
- if (argv[i][0] == '-' && argv[i][1] == '-')
- {
- size_t j;
- /* Find a mapping that applies to this option. */
- for (j = 0; j < ARRAY_SIZE (option_map); j++)
- {
- size_t optlen = strlen (option_map[j].name);
- size_t arglen = strlen (argv[i]);
- size_t complen = arglen > optlen ? optlen : arglen;
- const char *arginfo = option_map[j].arg_info;
-
- if (arginfo == 0)
- arginfo = "";
-
- if (!strncmp (argv[i], option_map[j].name, complen))
- {
- const char *arg = 0;
-
- if (arglen < optlen)
- {
- size_t k;
- for (k = j + 1; k < ARRAY_SIZE (option_map); k++)
- if (strlen (option_map[k].name) >= arglen
- && !strncmp (argv[i], option_map[k].name, arglen))
- {
- error ("ambiguous abbreviation %s", argv[i]);
- break;
- }
-
- if (k != ARRAY_SIZE (option_map))
- break;
- }
-
- if (arglen > optlen)
- {
- /* If the option has an argument, accept that. */
- if (argv[i][optlen] == '=')
- arg = argv[i] + optlen + 1;
-
- /* If this mapping requires extra text at end of name,
- accept that as "argument". */
- else if (strchr (arginfo, '*') != 0)
- arg = argv[i] + optlen;
-
- /* Otherwise, extra text at end means mismatch.
- Try other mappings. */
- else
- continue;
- }
-
- else if (strchr (arginfo, '*') != 0)
- {
- error ("incomplete '%s' option", option_map[j].name);
- break;
- }
-
- /* Handle arguments. */
- if (strchr (arginfo, 'a') != 0)
- {
- if (arg == 0)
- {
- if (i + 1 == argc)
- {
- error ("missing argument to '%s' option",
- option_map[j].name);
- break;
- }
-
- arg = argv[++i];
- }
- }
- else if (strchr (arginfo, '*') != 0)
- ;
- else if (strchr (arginfo, 'o') == 0)
- {
- if (arg != 0)
- error ("extraneous argument to '%s' option",
- option_map[j].name);
- arg = 0;
- }
-
- /* Store the translation as one argv elt or as two. */
- if (arg != 0 && strchr (arginfo, 'j') != 0)
- newv[newindex++] = concat (option_map[j].equivalent, arg,
- NULL);
- else if (arg != 0)
- {
- newv[newindex++] = option_map[j].equivalent;
- newv[newindex++] = arg;
- }
- else
- newv[newindex++] = option_map[j].equivalent;
-
- break;
- }
- }
- i++;
- }
-
- /* Handle old-fashioned options--just copy them through,
- with their arguments. */
- else if (argv[i][0] == '-')
- {
- const char *p = argv[i] + 1;
- int c = *p;
- int nskip = 1;
-
- if (SWITCH_TAKES_ARG (c) > (p[1] != 0))
- nskip += SWITCH_TAKES_ARG (c) - (p[1] != 0);
- else if (WORD_SWITCH_TAKES_ARG (p))
- nskip += WORD_SWITCH_TAKES_ARG (p);
- else if ((c == 'B' || c == 'b' || c == 'x')
- && p[1] == 0)
- nskip += 1;
- else if (! strcmp (p, "Xlinker"))
- nskip += 1;
- else if (! strcmp (p, "Xpreprocessor"))
- nskip += 1;
- else if (! strcmp (p, "Xassembler"))
- nskip += 1;
-
- /* Watch out for an option at the end of the command line that
- is missing arguments, and avoid skipping past the end of the
- command line. */
- if (nskip + i > argc)
- nskip = argc - i;
-
- while (nskip > 0)
- {
- newv[newindex++] = argv[i++];
- nskip--;
- }
- }
- else
- /* Ordinary operands, or +e options. */
- newv[newindex++] = argv[i++];
- }
-
- newv[newindex] = 0;
-
- *argvp = newv;
- *argcp = newindex;
-}
+static VEC(char_p,heap) *preprocessor_options;
\f
static char *
skip_whitespace (char *p)
INIT_STATIC_SPEC ("link_gomp", &link_gomp_spec),
INIT_STATIC_SPEC ("libgcc", &libgcc_spec),
INIT_STATIC_SPEC ("startfile", &startfile_spec),
- INIT_STATIC_SPEC ("switches_need_spaces", &switches_need_spaces),
INIT_STATIC_SPEC ("cross_compile", &cross_compile),
INIT_STATIC_SPEC ("version", &compiler_version),
INIT_STATIC_SPEC ("multilib", &multilib_select),
INIT_STATIC_SPEC ("linker_plugin_file", &linker_plugin_file_spec),
INIT_STATIC_SPEC ("lto_wrapper", <o_wrapper_spec),
INIT_STATIC_SPEC ("lto_gcc", <o_gcc_spec),
- INIT_STATIC_SPEC ("lto_libgcc", <o_libgcc_spec),
INIT_STATIC_SPEC ("link_libgcc", &link_libgcc_spec),
INIT_STATIC_SPEC ("md_exec_prefix", &md_exec_prefix),
INIT_STATIC_SPEC ("md_startfile_prefix", &md_startfile_prefix),
{ "if-exists", if_exists_spec_function },
{ "if-exists-else", if_exists_else_spec_function },
{ "replace-outfile", replace_outfile_spec_function },
+ { "remove-outfile", remove_outfile_spec_function },
{ "version-compare", version_compare_spec_function },
{ "include", include_spec_function },
+ { "find-file", find_file_spec_function },
+ { "find-plugindir", find_plugindir_spec_function },
{ "print-asm-header", print_asm_header_spec_function },
{ "compare-debug-dump-opt", compare_debug_dump_opt_spec_function },
{ "compare-debug-self-opt", compare_debug_self_opt_spec_function },
{ "compare-debug-auxbase-opt", compare_debug_auxbase_opt_spec_function },
+ { "pass-through-libs", pass_through_libs_spec_func },
#ifdef EXTRA_SPEC_FUNCTIONS
EXTRA_SPEC_FUNCTIONS
#endif
return; /* Already initialized. */
if (verbose_flag)
- notice ("Using built-in specs.\n");
+ fnotice (stderr, "Using built-in specs.\n");
#ifdef EXTRA_SPECS
extra_specs = XCNEWVEC (struct spec_list, ARRAY_SIZE (extra_specs_1));
"-lgcc_eh"
#ifdef USE_LIBUNWIND_EXCEPTIONS
# ifdef HAVE_LD_STATIC_DYNAMIC
- " %{!static:-Bstatic} -lunwind %{!static:-Bdynamic}"
+ " %{!static:" LD_STATIC_OPTION "} -lunwind"
+ " %{!static:" LD_DYNAMIC_OPTION "}"
# else
" -lunwind"
# endif
}
#endif
-#if defined LINK_EH_SPEC || defined LINK_BUILDID_SPEC
+#if defined LINK_EH_SPEC || defined LINK_BUILDID_SPEC || \
+ defined LINKER_HASH_STYLE
# ifdef LINK_BUILDID_SPEC
/* Prepend LINK_BUILDID_SPEC to whatever link_spec we had before. */
obstack_grow (&obstack, LINK_BUILDID_SPEC, sizeof(LINK_BUILDID_SPEC) - 1);
# ifdef LINK_EH_SPEC
/* Prepend LINK_EH_SPEC to whatever link_spec we had before. */
obstack_grow (&obstack, LINK_EH_SPEC, sizeof(LINK_EH_SPEC) - 1);
+# endif
+# ifdef LINKER_HASH_STYLE
+ /* Prepend --hash-style=LINKER_HASH_STYLE to whatever link_spec we had
+ before. */
+ {
+ static const char hash_style[] = "--hash-style=";
+ obstack_grow (&obstack, hash_style, sizeof(hash_style) - 1);
+ obstack_grow (&obstack, LINKER_HASH_STYLE, sizeof(LINKER_HASH_STYLE) - 1);
+ obstack_1grow (&obstack, ' ');
+ }
# endif
obstack_grow0 (&obstack, link_spec, strlen (link_spec));
link_spec = XOBFINISH (&obstack, const char *);
#ifdef DEBUG_SPECS
if (verbose_flag)
- notice ("Setting spec %s to '%s'\n\n", name, *(sl->ptr_spec));
+ fnotice (stderr, "Setting spec %s to '%s'\n\n", name, *(sl->ptr_spec));
#endif
/* Free the old spec. */
\f
/* Accumulate a command (program name and args), and run it. */
-/* Vector of pointers to arguments in the current line of specifications. */
-
-static const char **argbuf;
+typedef const char *const_char_p; /* For DEF_VEC_P. */
+DEF_VEC_P(const_char_p);
+DEF_VEC_ALLOC_P(const_char_p,heap);
-/* Number of elements allocated in argbuf. */
-
-static int argbuf_length;
-
-/* Number of elements in argbuf currently in use (containing args). */
+/* Vector of pointers to arguments in the current line of specifications. */
-static int argbuf_index;
+static VEC(const_char_p,heap) *argbuf;
-/* Position in the argbuf array containing the name of the output file
+/* Position in the argbuf vector containing the name of the output file
(the value associated with the "-o" flag). */
static int have_o_argbuf_index = 0;
/* Number of commands that exited with a signal. */
static int signal_count;
-
-/* Name with which this program was invoked. */
-
-static const char *programname;
\f
/* Allocate the argument vector. */
static void
alloc_args (void)
{
- argbuf_length = 10;
- argbuf = XNEWVEC (const char *, argbuf_length);
+ argbuf = VEC_alloc (const_char_p, heap, 10);
}
/* Clear out the vector of arguments (after a command is executed). */
static void
clear_args (void)
{
- argbuf_index = 0;
+ VEC_truncate (const_char_p, argbuf, 0);
}
/* Add one argument to the vector at the end.
static void
store_arg (const char *arg, int delete_always, int delete_failure)
{
- if (argbuf_index + 1 == argbuf_length)
- argbuf = XRESIZEVEC (const char *, argbuf, (argbuf_length *= 2));
-
- argbuf[argbuf_index++] = arg;
- argbuf[argbuf_index] = 0;
+ VEC_safe_push (const_char_p, heap, argbuf, arg);
if (strcmp (arg, "-o") == 0)
- have_o_argbuf_index = argbuf_index;
+ have_o_argbuf_index = VEC_length (const_char_p, argbuf);
if (delete_always || delete_failure)
- record_temp_file (arg, delete_always, delete_failure);
+ {
+ const char *p;
+ /* If the temporary file we should delete is specified as
+ part of a joined argument extract the filename. */
+ if (arg[0] == '-'
+ && (p = strrchr (arg, '=')))
+ arg = p + 1;
+ record_temp_file (arg, delete_always, delete_failure);
+ }
}
\f
/* Load specs from a file name named FILENAME, replacing occurrences of
char *specs_p;
if (verbose_flag)
- notice ("Reading specs from %s\n", filename);
+ fnotice (stderr, "Reading specs from %s\n", filename);
/* Open and stat the file. */
desc = open (filename, O_RDONLY, 0);
p1++;
if (*p1++ != '<' || p[-2] != '>')
- fatal ("specs %%include syntax malformed after %ld characters",
- (long) (p1 - buffer + 1));
+ fatal_error ("specs %%include syntax malformed after "
+ "%ld characters",
+ (long) (p1 - buffer + 1));
p[-2] = '\0';
new_filename = find_a_file (&startfile_prefixes, p1, R_OK, true);
p1++;
if (*p1++ != '<' || p[-2] != '>')
- fatal ("specs %%include syntax malformed after %ld characters",
- (long) (p1 - buffer + 1));
+ fatal_error ("specs %%include syntax malformed after "
+ "%ld characters",
+ (long) (p1 - buffer + 1));
p[-2] = '\0';
new_filename = find_a_file (&startfile_prefixes, p1, R_OK, true);
if (new_filename)
read_specs (new_filename, FALSE);
else if (verbose_flag)
- notice ("could not find specs file %s\n", p1);
+ fnotice (stderr, "could not find specs file %s\n", p1);
continue;
}
else if (!strncmp (p1, "%rename", sizeof "%rename" - 1)
p1++;
if (! ISALPHA ((unsigned char) *p1))
- fatal ("specs %%rename syntax malformed after %ld characters",
- (long) (p1 - buffer));
+ fatal_error ("specs %%rename syntax malformed after "
+ "%ld characters",
+ (long) (p1 - buffer));
p2 = p1;
while (*p2 && !ISSPACE ((unsigned char) *p2))
p2++;
if (*p2 != ' ' && *p2 != '\t')
- fatal ("specs %%rename syntax malformed after %ld characters",
- (long) (p2 - buffer));
+ fatal_error ("specs %%rename syntax malformed after "
+ "%ld characters",
+ (long) (p2 - buffer));
name_len = p2 - p1;
*p2++ = '\0';
p2++;
if (! ISALPHA ((unsigned char) *p2))
- fatal ("specs %%rename syntax malformed after %ld characters",
- (long) (p2 - buffer));
+ fatal_error ("specs %%rename syntax malformed after "
+ "%ld characters",
+ (long) (p2 - buffer));
/* Get new spec name. */
p3 = p2;
p3++;
if (p3 != p - 1)
- fatal ("specs %%rename syntax malformed after %ld characters",
- (long) (p3 - buffer));
+ fatal_error ("specs %%rename syntax malformed after "
+ "%ld characters",
+ (long) (p3 - buffer));
*p3 = '\0';
for (sl = specs; sl; sl = sl->next)
break;
if (!sl)
- fatal ("specs %s spec was not found to be renamed", p1);
+ fatal_error ("specs %s spec was not found to be renamed", p1);
if (strcmp (p1, p2) == 0)
continue;
for (newsl = specs; newsl; newsl = newsl->next)
if (strcmp (newsl->name, p2) == 0)
- fatal ("%s: attempt to rename spec '%s' to already defined spec '%s'",
+ fatal_error ("%s: attempt to rename spec %qs to "
+ "already defined spec %qs",
filename, p1, p2);
if (verbose_flag)
{
- notice ("rename spec %s to %s\n", p1, p2);
+ fnotice (stderr, "rename spec %s to %s\n", p1, p2);
#ifdef DEBUG_SPECS
- notice ("spec is '%s'\n\n", *(sl->ptr_spec));
+ fnotice (stderr, "spec is '%s'\n\n", *(sl->ptr_spec));
#endif
}
continue;
}
else
- fatal ("specs unknown %% command after %ld characters",
- (long) (p1 - buffer));
+ fatal_error ("specs unknown %% command after %ld characters",
+ (long) (p1 - buffer));
}
/* Find the colon that should end the suffix. */
/* The colon shouldn't be missing. */
if (*p1 != ':')
- fatal ("specs file malformed after %ld characters",
- (long) (p1 - buffer));
+ fatal_error ("specs file malformed after %ld characters",
+ (long) (p1 - buffer));
/* Skip back over trailing whitespace. */
p2 = p1;
/* Find the next line. */
p = skip_whitespace (p1 + 1);
if (p[1] == 0)
- fatal ("specs file malformed after %ld characters",
- (long) (p - buffer));
+ fatal_error ("specs file malformed after %ld characters",
+ (long) (p - buffer));
p1 = p;
/* Find next blank line or end of string. */
}
if (link_command_spec == 0)
- fatal ("spec file has no spec for linking");
+ fatal_error ("spec file has no spec for linking");
}
\f
/* Record the names of temporary files we tell compilers to write,
{
struct temp_file *temp;
for (temp = always_delete_queue; temp; temp = temp->next)
- if (! strcmp (name, temp->name))
+ if (! filename_cmp (name, temp->name))
goto already1;
temp = XNEW (struct temp_file);
{
struct temp_file *temp;
for (temp = failure_delete_queue; temp; temp = temp->next)
- if (! strcmp (name, temp->name))
+ if (! filename_cmp (name, temp->name))
goto already2;
temp = XNEW (struct temp_file);
xputenv (const char *string)
{
if (verbose_flag)
- notice ("%s\n", string);
+ fnotice (stderr, "%s\n", string);
putenv (CONST_CAST (char *, string));
}
int require_machine_suffix, int os_multilib)
{
if (!IS_ABSOLUTE_PATH (prefix))
- fatal ("system path '%s' is not absolute", prefix);
+ fatal_error ("system path %qs is not absolute", prefix);
if (target_system_root)
{
const char *prog; /* program name. */
const char **argv; /* vector of args. */
};
+ const char *arg;
struct command *commands; /* each command buffer with above info. */
if (wrapper_string)
{
- string = find_a_file (&exec_prefixes, argbuf[0], X_OK, false);
- argbuf[0] = (string) ? string : argbuf[0];
+ string = find_a_file (&exec_prefixes,
+ VEC_index (const_char_p, argbuf, 0), X_OK, false);
+ if (string)
+ VEC_replace (const_char_p, argbuf, 0, string);
insert_wrapper (wrapper_string);
}
/* Count # of piped commands. */
- for (n_commands = 1, i = 0; i < argbuf_index; i++)
- if (strcmp (argbuf[i], "|") == 0)
+ for (n_commands = 1, i = 0; VEC_iterate (const_char_p, argbuf, i, arg); i++)
+ if (strcmp (arg, "|") == 0)
n_commands++;
/* Get storage for each command. */
and record info about each one.
Also search for the programs that are to be run. */
- commands[0].prog = argbuf[0]; /* first command. */
- commands[0].argv = &argbuf[0];
+ VEC_safe_push (const_char_p, heap, argbuf, 0);
+
+ commands[0].prog = VEC_index (const_char_p, argbuf, 0); /* first command. */
+ commands[0].argv = VEC_address (const_char_p, argbuf);
if (!wrapper_string)
{
commands[0].argv[0] = (string) ? string : commands[0].argv[0];
}
- for (n_commands = 1, i = 0; i < argbuf_index; i++)
- if (strcmp (argbuf[i], "|") == 0)
+ for (n_commands = 1, i = 0; VEC_iterate (const_char_p, argbuf, i, arg); i++)
+ if (arg && strcmp (arg, "|") == 0)
{ /* each command. */
#if defined (__MSDOS__) || defined (OS2) || defined (VMS)
- fatal ("-pipe not supported");
+ fatal_error ("-pipe not supported");
#endif
- argbuf[i] = 0; /* termination of command args. */
- commands[n_commands].prog = argbuf[i + 1];
- commands[n_commands].argv = &argbuf[i + 1];
+ VEC_replace (const_char_p, argbuf, i, 0); /* Termination of
+ command args. */
+ commands[n_commands].prog = VEC_index (const_char_p, argbuf, i + 1);
+ commands[n_commands].argv
+ = &(VEC_address (const_char_p, argbuf))[i + 1];
string = find_a_file (&exec_prefixes, commands[n_commands].prog,
X_OK, false);
if (string)
n_commands++;
}
- argbuf[argbuf_index] = 0;
-
/* If -v, print what we are about to do, and maybe query. */
if (verbose_flag)
for (j = commands[i].argv; *j; j++)
{
const char *p;
- fprintf (stderr, " \"");
for (p = *j; *p; ++p)
+ if (!ISALNUM ((unsigned char) *p)
+ && *p != '_' && *p != '/' && *p != '-' && *p != '.')
+ break;
+ if (*p || !*j)
{
- if (*p == '"' || *p == '\\' || *p == '$')
- fputc ('\\', stderr);
- fputc (*p, stderr);
+ fprintf (stderr, " \"");
+ for (p = *j; *p; ++p)
+ {
+ if (*p == '"' || *p == '\\' || *p == '$')
+ fputc ('\\', stderr);
+ fputc (*p, stderr);
+ }
+ fputc ('"', stderr);
}
- fputc ('"', stderr);
+ /* If it's empty, print "". */
+ else if (!**j)
+ fprintf (stderr, " \"\"");
+ else
+ fprintf (stderr, " %s", *j);
}
}
else
for (j = commands[i].argv; *j; j++)
- fprintf (stderr, " %s", *j);
+ /* If it's empty, print "". */
+ if (!**j)
+ fprintf (stderr, " \"\"");
+ else
+ fprintf (stderr, " %s", *j);
/* Print a pipe symbol after all but the last command. */
if (i + 1 != n_commands)
return 0;
}
#ifdef DEBUG
- notice ("\nGo ahead? (y or n) ");
+ fnotice (stderr, "\nGo ahead? (y or n) ");
fflush (stderr);
i = getchar ();
if (i != '\n')
pex = pex_init (PEX_USE_PIPES | ((report_times || report_times_to_file)
? PEX_RECORD_TIMES : 0),
- programname, temp_filename);
+ progname, temp_filename);
if (pex == NULL)
- pfatal_with_name (_("pex_init failed"));
+ fatal_error ("pex_init failed: %m");
for (i = 0; i < n_commands; i++)
{
if (errmsg != NULL)
{
if (err == 0)
- fatal (errmsg);
+ fatal_error (errmsg);
else
{
errno = err;
statuses = (int *) alloca (n_commands * sizeof (int));
if (!pex_get_status (pex, n_commands, statuses))
- pfatal_with_name (_("failed to get exit status"));
+ fatal_error ("failed to get exit status: %m");
if (report_times || report_times_to_file)
{
times = (struct pex_time *) alloca (n_commands * sizeof (struct pex_time));
if (!pex_get_times (pex, n_commands, times))
- pfatal_with_name (_("failed to get process times"));
+ fatal_error ("failed to get process times: %m");
}
pex_free (pex);
}
else
#endif
- fatal_ice ("\
-Internal error: %s (program %s)\n\
-Please submit a full bug report.\n\
-See %s for instructions.",
- strsignal (WTERMSIG (status)), commands[i].prog,
- bug_report_url);
+ internal_error ("%s (program %s)",
+ strsignal (WTERMSIG (status)), commands[i].prog);
}
else if (WIFEXITED (status)
&& WEXITSTATUS (status) >= MIN_FATAL_STATUS)
if (ut + st != 0)
{
if (report_times)
- notice ("# %s %.2f %.2f\n", commands[i].prog, ut, st);
+ fnotice (stderr, "# %s %.2f %.2f\n",
+ commands[i].prog, ut, st);
if (report_times_to_file)
{
SWITCH_LIVE to indicate this switch is true in a conditional spec.
SWITCH_FALSE to indicate this switch is overridden by a later switch.
SWITCH_IGNORE to indicate this switch should be ignored (used in %<S).
+ SWITCH_IGNORE_PERMANENTLY to indicate this switch should be ignored
+ in all do_spec calls afterwards. Used for %<S from self specs.
The `validated' field is nonzero if any spec has looked at this switch;
if it remains zero at the end of the run, it must be meaningless. */
-#define SWITCH_LIVE 0x1
-#define SWITCH_FALSE 0x2
-#define SWITCH_IGNORE 0x4
+#define SWITCH_LIVE (1 << 0)
+#define SWITCH_FALSE (1 << 1)
+#define SWITCH_IGNORE (1 << 2)
+#define SWITCH_IGNORE_PERMANENTLY (1 << 3)
+#define SWITCH_KEEP_FOR_GCC (1 << 4)
struct switchstr
{
static int n_switches;
+static int n_switches_alloc;
+
/* Set to zero if -fcompare-debug is disabled, positive if it's
enabled and we're running the first compilation, negative if it's
enabled and we're running the second compilation. For most of the
static int n_switches_debug_check[2];
+static int n_switches_alloc_debug_check[2];
+
static char *debug_check_temp_file[2];
/* Language is one of three things:
int n_infiles;
+static int n_infiles_alloc;
+
/* True if multiple input files are being compiled to a single
assembly file. */
static void
display_help (void)
{
- printf (_("Usage: %s [options] file...\n"), programname);
+ printf (_("Usage: %s [options] file...\n"), progname);
fputs (_("Options:\n"), stdout);
fputs (_(" -pass-exit-codes Exit with highest error code from a phase\n"), stdout);
fputs (_(" -Xassembler <arg> Pass <arg> on to the assembler\n"), stdout);
fputs (_(" -Xpreprocessor <arg> Pass <arg> on to the preprocessor\n"), stdout);
fputs (_(" -Xlinker <arg> Pass <arg> on to the linker\n"), stdout);
- fputs (_(" -combine Pass multiple source files to compiler at once\n"), stdout);
fputs (_(" -save-temps Do not delete intermediate files\n"), stdout);
fputs (_(" -save-temps=<arg> Do not delete intermediate files\n"), stdout);
fputs (_("\
--sysroot=<directory> Use <directory> as the root directory for headers\n\
and libraries\n"), stdout);
fputs (_(" -B <directory> Add <directory> to the compiler's search paths\n"), stdout);
- fputs (_(" -b <machine> Run gcc for target <machine>, if installed\n"), stdout);
- fputs (_(" -V <version> Run gcc version number <version>, if installed\n"), stdout);
fputs (_(" -v Display the programs invoked by the compiler\n"), stdout);
fputs (_(" -### Like -v but options quoted and commands not executed\n"), stdout);
fputs (_(" -E Preprocess only; do not compile, assemble or link\n"), stdout);
\nOptions starting with -g, -f, -m, -O, -W, or --param are automatically\n\
passed on to the various sub-processes invoked by %s. In order to pass\n\
other options on to these processes the -W<letter> options must be used.\n\
-"), programname);
+"), progname);
/* The rest of the options are displayed by invocations of the various
sub-processes. */
static void
add_preprocessor_option (const char *option, int len)
{
- n_preprocessor_options++;
-
- if (! preprocessor_options)
- preprocessor_options = XNEWVEC (char *, n_preprocessor_options);
- else
- preprocessor_options = XRESIZEVEC (char *, preprocessor_options,
- n_preprocessor_options);
-
- preprocessor_options [n_preprocessor_options - 1] =
- save_string (option, len);
+ VEC_safe_push (char_p, heap, preprocessor_options,
+ save_string (option, len));
}
static void
add_assembler_option (const char *option, int len)
{
- n_assembler_options++;
-
- if (! assembler_options)
- assembler_options = XNEWVEC (char *, n_assembler_options);
- else
- assembler_options = XRESIZEVEC (char *, assembler_options,
- n_assembler_options);
-
- assembler_options [n_assembler_options - 1] = save_string (option, len);
+ VEC_safe_push (char_p, heap, assembler_options, save_string (option, len));
}
static void
add_linker_option (const char *option, int len)
{
- n_linker_options++;
-
- if (! linker_options)
- linker_options = XNEWVEC (char *, n_linker_options);
- else
- linker_options = XRESIZEVEC (char *, linker_options, n_linker_options);
-
- linker_options [n_linker_options - 1] = save_string (option, len);
+ VEC_safe_push (char_p, heap, linker_options, save_string (option, len));
}
\f
-/* Create the vector `switches' and its contents.
- Store its length in `n_switches'. */
+/* Allocate space for an input file in infiles. */
static void
-process_command (int argc, const char **argv)
+alloc_infile (void)
{
- int i;
- const char *temp;
- char *temp1;
- const char *spec_lang = 0;
- int last_language_n_infiles;
- int lang_n_infiles = 0;
-#ifdef MODIFY_TARGET_NAME
- int is_modify_target_name;
- unsigned int j;
-#endif
- const char *tooldir_prefix;
- char *(*get_relative_prefix) (const char *, const char *,
- const char *) = NULL;
-
- GET_ENVIRONMENT (gcc_exec_prefix, "GCC_EXEC_PREFIX");
+ if (n_infiles_alloc == 0)
+ {
+ n_infiles_alloc = 16;
+ infiles = XNEWVEC (struct infile, n_infiles_alloc);
+ }
+ else if (n_infiles_alloc == n_infiles)
+ {
+ n_infiles_alloc *= 2;
+ infiles = XRESIZEVEC (struct infile, infiles, n_infiles_alloc);
+ }
+}
- n_switches = 0;
- n_infiles = 0;
- added_libraries = 0;
+/* Store an input file with the given NAME and LANGUAGE in
+ infiles. */
- /* Figure compiler version from version string. */
+static void
+add_infile (const char *name, const char *language)
+{
+ alloc_infile ();
+ infiles[n_infiles].name = name;
+ infiles[n_infiles++].language = language;
+}
- compiler_version = temp1 = xstrdup (version_string);
+/* Allocate space for a switch in switches. */
- for (; *temp1; ++temp1)
+static void
+alloc_switch (void)
+{
+ if (n_switches_alloc == 0)
{
- if (*temp1 == ' ')
- {
- *temp1 = '\0';
- break;
- }
+ n_switches_alloc = 16;
+ switches = XNEWVEC (struct switchstr, n_switches_alloc);
}
-
- /* If there is a -V or -b option (or both), process it now, before
- trying to interpret the rest of the command line.
- Use heuristic that all configuration names must have at least
- one dash '-'. This allows us to pass options starting with -b. */
- if (argc > 1 && argv[1][0] == '-'
- && (argv[1][1] == 'V'
- || (argv[1][1] == 'b'
- && (argv[1][2] == '\0'
- || NULL != strchr (argv[1] + 2, '-')))))
+ else if (n_switches_alloc == n_switches)
{
- const char *new_version = DEFAULT_TARGET_VERSION;
- const char *new_machine = DEFAULT_TARGET_MACHINE;
- const char *progname = argv[0];
- char **new_argv;
- char *new_argv0;
- int baselen;
- int status = 0;
- int err = 0;
- const char *errmsg;
+ n_switches_alloc *= 2;
+ switches = XRESIZEVEC (struct switchstr, switches, n_switches_alloc);
+ }
+}
- while (argc > 1 && argv[1][0] == '-'
- && (argv[1][1] == 'V'
- || (argv[1][1] == 'b'
- && (argv[1][2] == '\0'
- || NULL != strchr (argv[1] + 2, '-')))))
- {
- char opt = argv[1][1];
- const char *arg;
- if (argv[1][2] != '\0')
- {
- arg = argv[1] + 2;
- argc -= 1;
- argv += 1;
- }
- else if (argc > 2)
- {
- arg = argv[2];
- argc -= 2;
- argv += 2;
- }
- else
- fatal ("'-%c' option must have argument", opt);
- if (opt == 'V')
- new_version = arg;
- else
- new_machine = arg;
- }
+/* Save an option OPT with N_ARGS arguments in array ARGS, marking it
+ as validated if VALIDATED. */
- for (baselen = strlen (progname); baselen > 0; baselen--)
- if (IS_DIR_SEPARATOR (progname[baselen-1]))
- break;
- new_argv0 = XDUPVAR (char, progname, baselen,
- baselen + concat_length (new_version, new_machine,
- "-gcc-", NULL) + 1);
- strcpy (new_argv0 + baselen, new_machine);
- strcat (new_argv0, "-gcc-");
- strcat (new_argv0, new_version);
+static void
+save_switch (const char *opt, size_t n_args, const char *const *args,
+ bool validated)
+{
+ alloc_switch ();
+ switches[n_switches].part1 = opt + 1;
+ if (n_args == 0)
+ switches[n_switches].args = 0;
+ else
+ {
+ switches[n_switches].args = XNEWVEC (const char *, n_args + 1);
+ memcpy (switches[n_switches].args, args, n_args * sizeof (const char *));
+ switches[n_switches].args[n_args] = NULL;
+ }
- new_argv = XDUPVEC (char *, argv, argc + 1);
- new_argv[0] = new_argv0;
+ switches[n_switches].live_cond = 0;
+ switches[n_switches].validated = validated;
+ switches[n_switches].ordering = 0;
+ n_switches++;
+}
- errmsg = pex_one (PEX_SEARCH, new_argv0, new_argv, progname, NULL,
- NULL, &status, &err);
+/* Handle an option DECODED that is unknown to the option-processing
+ machinery. */
- if (errmsg)
- {
- if (err == 0)
- fatal ("couldn't run '%s': %s", new_argv0, errmsg);
- else
- fatal ("couldn't run '%s': %s: %s", new_argv0, errmsg,
- xstrerror (err));
- }
- exit (status);
- }
+static bool
+driver_unknown_option_callback (const struct cl_decoded_option *decoded)
+{
+ const char *opt = decoded->arg;
+ if (opt[1] == 'W' && opt[2] == 'n' && opt[3] == 'o' && opt[4] == '-'
+ && !(decoded->errors & CL_ERR_NEGATIVE))
+ {
+ /* Leave unknown -Wno-* options for the compiler proper, to be
+ diagnosed only if there are warnings. */
+ save_switch (decoded->canonical_option[0],
+ decoded->canonical_option_num_elements - 1,
+ &decoded->canonical_option[1], false);
+ return false;
+ }
+ else
+ return true;
+}
- /* Convert new-style -- options to old-style. */
- translate_options (&argc,
- CONST_CAST2 (const char *const **, const char ***,
- &argv));
+/* Handle an option DECODED that is not marked as CL_DRIVER.
+ LANG_MASK will always be CL_DRIVER. */
- /* Do language-specific adjustment/addition of flags. */
- lang_specific_driver (&argc,
- CONST_CAST2 (const char *const **, const char ***,
- &argv),
- &added_libraries);
+static void
+driver_wrong_lang_callback (const struct cl_decoded_option *decoded,
+ unsigned int lang_mask ATTRIBUTE_UNUSED)
+{
+ /* At this point, non-driver options are accepted (and expected to
+ be passed down by specs) unless marked to be rejected by the
+ driver. Options to be rejected by the driver but accepted by the
+ compilers proper are treated just like completely unknown
+ options. */
+ const struct cl_option *option = &cl_options[decoded->opt_index];
+
+ if (option->cl_reject_driver)
+ error ("unrecognized command line option %qs",
+ decoded->orig_option_with_args_text);
+ else
+ save_switch (decoded->canonical_option[0],
+ decoded->canonical_option_num_elements - 1,
+ &decoded->canonical_option[1], false);
+}
+
+/* Note that an option (index OPT_INDEX, argument ARG, value VALUE)
+ has been successfully handled with a handler for mask MASK. */
+
+static void
+driver_post_handling_callback (const struct cl_decoded_option *decoded ATTRIBUTE_UNUSED,
+ unsigned int mask ATTRIBUTE_UNUSED)
+{
+ /* Nothing to do here. */
+}
+
+static const char *spec_lang = 0;
+static int last_language_n_infiles;
+
+/* Handle a driver option; arguments and return value as for
+ handle_option. */
+
+static bool
+driver_handle_option (struct gcc_options *opts,
+ struct gcc_options *opts_set,
+ const struct cl_decoded_option *decoded,
+ unsigned int lang_mask ATTRIBUTE_UNUSED, int kind,
+ location_t loc,
+ const struct cl_option_handlers *handlers ATTRIBUTE_UNUSED,
+ diagnostic_context *dc)
+{
+ size_t opt_index = decoded->opt_index;
+ const char *arg = decoded->arg;
+ const char *compare_debug_replacement_opt;
+ int value = decoded->value;
+ bool validated = false;
+ bool do_save = true;
+
+ gcc_assert (opts == &global_options);
+ gcc_assert (opts_set == &global_options_set);
+ gcc_assert (kind == DK_UNSPECIFIED);
+ gcc_assert (loc == UNKNOWN_LOCATION);
+ gcc_assert (dc == global_dc);
+
+ switch (opt_index)
+ {
+ case OPT_dumpspecs:
+ {
+ struct spec_list *sl;
+ init_spec ();
+ for (sl = specs; sl; sl = sl->next)
+ printf ("*%s:\n%s\n\n", sl->name, *(sl->ptr_spec));
+ if (link_command_spec)
+ printf ("*link_command:\n%s\n\n", link_command_spec);
+ exit (0);
+ }
+
+ case OPT_dumpversion:
+ printf ("%s\n", spec_version);
+ exit (0);
+
+ case OPT_dumpmachine:
+ printf ("%s\n", spec_machine);
+ exit (0);
+
+ case OPT__version:
+ print_version = 1;
+
+ /* CPP driver cannot obtain switch from cc1_options. */
+ if (is_cpp_driver)
+ add_preprocessor_option ("--version", strlen ("--version"));
+ add_assembler_option ("--version", strlen ("--version"));
+ add_linker_option ("--version", strlen ("--version"));
+ break;
+
+ case OPT__help:
+ print_help_list = 1;
+
+ /* CPP driver cannot obtain switch from cc1_options. */
+ if (is_cpp_driver)
+ add_preprocessor_option ("--help", 6);
+ add_assembler_option ("--help", 6);
+ add_linker_option ("--help", 6);
+ break;
+
+ case OPT__help_:
+ print_subprocess_help = 2;
+ break;
+
+ case OPT__target_help:
+ print_subprocess_help = 1;
+
+ /* CPP driver cannot obtain switch from cc1_options. */
+ if (is_cpp_driver)
+ add_preprocessor_option ("--target-help", 13);
+ add_assembler_option ("--target-help", 13);
+ add_linker_option ("--target-help", 13);
+ break;
+
+ case OPT_pass_exit_codes:
+ case OPT_print_search_dirs:
+ case OPT_print_file_name_:
+ case OPT_print_prog_name_:
+ case OPT_print_multi_lib:
+ case OPT_print_multi_directory:
+ case OPT_print_sysroot:
+ case OPT_print_multi_os_directory:
+ case OPT_print_sysroot_headers_suffix:
+ case OPT_time:
+ case OPT_wrapper:
+ /* These options set the variables specified in common.opt
+ automatically, and do not need to be saved for spec
+ processing. */
+ do_save = false;
+ break;
+
+ case OPT_print_libgcc_file_name:
+ print_file_name = "libgcc.a";
+ do_save = false;
+ break;
+
+ case OPT_fcompare_debug_second:
+ compare_debug_second = 1;
+ break;
+
+ case OPT_fcompare_debug:
+ switch (value)
+ {
+ case 0:
+ compare_debug_replacement_opt = "-fcompare-debug=";
+ arg = "";
+ goto compare_debug_with_arg;
+
+ case 1:
+ compare_debug_replacement_opt = "-fcompare-debug=-gtoggle";
+ arg = "-gtoggle";
+ goto compare_debug_with_arg;
+
+ default:
+ gcc_unreachable ();
+ }
+ break;
+
+ case OPT_fcompare_debug_:
+ compare_debug_replacement_opt = decoded->canonical_option[0];
+ compare_debug_with_arg:
+ gcc_assert (decoded->canonical_option_num_elements == 1);
+ gcc_assert (arg != NULL);
+ if (arg)
+ compare_debug = 1;
+ else
+ compare_debug = -1;
+ if (compare_debug < 0)
+ compare_debug_opt = NULL;
+ else
+ compare_debug_opt = arg;
+ save_switch (compare_debug_replacement_opt, 0, NULL, validated);
+ return true;
+
+ case OPT_Wa_:
+ {
+ int prev, j;
+ /* Pass the rest of this option to the assembler. */
+
+ /* Split the argument at commas. */
+ prev = 0;
+ for (j = 0; arg[j]; j++)
+ if (arg[j] == ',')
+ {
+ add_assembler_option (arg + prev, j - prev);
+ prev = j + 1;
+ }
+
+ /* Record the part after the last comma. */
+ add_assembler_option (arg + prev, j - prev);
+ }
+ do_save = false;
+ break;
+
+ case OPT_Wp_:
+ {
+ int prev, j;
+ /* Pass the rest of this option to the preprocessor. */
+
+ /* Split the argument at commas. */
+ prev = 0;
+ for (j = 0; arg[j]; j++)
+ if (arg[j] == ',')
+ {
+ add_preprocessor_option (arg + prev, j - prev);
+ prev = j + 1;
+ }
+
+ /* Record the part after the last comma. */
+ add_preprocessor_option (arg + prev, j - prev);
+ }
+ do_save = false;
+ break;
+
+ case OPT_Wl_:
+ {
+ int prev, j;
+ /* Split the argument at commas. */
+ prev = 0;
+ for (j = 0; arg[j]; j++)
+ if (arg[j] == ',')
+ {
+ add_infile (save_string (arg + prev, j - prev), "*");
+ prev = j + 1;
+ }
+ /* Record the part after the last comma. */
+ add_infile (arg + prev, "*");
+ }
+ do_save = false;
+ break;
+
+ case OPT_Xlinker:
+ add_infile (arg, "*");
+ do_save = false;
+ break;
+
+ case OPT_Xpreprocessor:
+ add_preprocessor_option (arg, strlen (arg));
+ do_save = false;
+ break;
+
+ case OPT_Xassembler:
+ add_assembler_option (arg, strlen (arg));
+ do_save = false;
+ break;
+
+ case OPT_l:
+ /* POSIX allows separation of -l and the lib arg; canonicalize
+ by concatenating -l with its arg */
+ add_infile (concat ("-l", arg, NULL), "*");
+ do_save = false;
+ break;
+
+ case OPT_L:
+ /* Similarly, canonicalize -L for linkers that may not accept
+ separate arguments. */
+ save_switch (concat ("-L", arg, NULL), 0, NULL, validated);
+ return true;
+
+ case OPT_F:
+ /* Likewise -F. */
+ save_switch (concat ("-F", arg, NULL), 0, NULL, validated);
+ return true;
+
+ case OPT_save_temps:
+ save_temps_flag = SAVE_TEMPS_CWD;
+ validated = true;
+ break;
+
+ case OPT_save_temps_:
+ if (strcmp (arg, "cwd") == 0)
+ save_temps_flag = SAVE_TEMPS_CWD;
+ else if (strcmp (arg, "obj") == 0
+ || strcmp (arg, "object") == 0)
+ save_temps_flag = SAVE_TEMPS_OBJ;
+ else
+ fatal_error ("%qs is an unknown -save-temps option",
+ decoded->orig_option_with_args_text);
+ break;
+
+ case OPT_no_canonical_prefixes:
+ /* Already handled as a special case, so ignored here. */
+ do_save = false;
+ break;
+
+ case OPT_pipe:
+ validated = true;
+ /* These options set the variables specified in common.opt
+ automatically, but do need to be saved for spec
+ processing. */
+ break;
+
+ case OPT_specs_:
+ {
+ struct user_specs *user = XNEW (struct user_specs);
+
+ user->next = (struct user_specs *) 0;
+ user->filename = arg;
+ if (user_specs_tail)
+ user_specs_tail->next = user;
+ else
+ user_specs_head = user;
+ user_specs_tail = user;
+ }
+ do_save = false;
+ break;
+
+ case OPT__sysroot_:
+ target_system_root = arg;
+ target_system_root_changed = 1;
+ do_save = false;
+ break;
+
+ case OPT_time_:
+ if (report_times_to_file)
+ fclose (report_times_to_file);
+ report_times_to_file = fopen (arg, "a");
+ do_save = false;
+ break;
+
+ case OPT____:
+ /* "-###"
+ This is similar to -v except that there is no execution
+ of the commands and the echoed arguments are quoted. It
+ is intended for use in shell scripts to capture the
+ driver-generated command line. */
+ verbose_only_flag++;
+ verbose_flag = 1;
+ do_save = false;
+ break;
+
+ case OPT_B:
+ {
+ size_t len = strlen (arg);
+
+ /* Catch the case where the user has forgotten to append a
+ directory separator to the path. Note, they may be using
+ -B to add an executable name prefix, eg "i386-elf-", in
+ order to distinguish between multiple installations of
+ GCC in the same directory. Hence we must check to see
+ if appending a directory separator actually makes a
+ valid directory name. */
+ if (!IS_DIR_SEPARATOR (arg[len - 1])
+ && is_directory (arg, false))
+ {
+ char *tmp = XNEWVEC (char, len + 2);
+ strcpy (tmp, arg);
+ tmp[len] = DIR_SEPARATOR;
+ tmp[++len] = 0;
+ arg = tmp;
+ }
+
+ add_prefix (&exec_prefixes, arg, NULL,
+ PREFIX_PRIORITY_B_OPT, 0, 0);
+ add_prefix (&startfile_prefixes, arg, NULL,
+ PREFIX_PRIORITY_B_OPT, 0, 0);
+ add_prefix (&include_prefixes, arg, NULL,
+ PREFIX_PRIORITY_B_OPT, 0, 0);
+ }
+ validated = true;
+ break;
+
+ case OPT_x:
+ spec_lang = arg;
+ if (!strcmp (spec_lang, "none"))
+ /* Suppress the warning if -xnone comes after the last input
+ file, because alternate command interfaces like g++ might
+ find it useful to place -xnone after each input file. */
+ spec_lang = 0;
+ else
+ last_language_n_infiles = n_infiles;
+ do_save = false;
+ break;
+
+ case OPT_o:
+ have_o = 1;
+#if defined(HAVE_TARGET_EXECUTABLE_SUFFIX) || defined(HAVE_TARGET_OBJECT_SUFFIX)
+ arg = convert_filename (arg, ! have_c, 0);
+#endif
+ /* Save the output name in case -save-temps=obj was used. */
+ save_temps_prefix = xstrdup (arg);
+ /* On some systems, ld cannot handle "-o" without a space. So
+ split the option from its argument. */
+ save_switch ("-o", 1, &arg, validated);
+ return true;
+
+ case OPT_static_libgcc:
+ case OPT_shared_libgcc:
+ case OPT_static_libgfortran:
+ case OPT_static_libstdc__:
+ /* These are always valid, since gcc.c itself understands the
+ first two, gfortranspec.c understands -static-libgfortran and
+ g++spec.c understands -static-libstdc++ */
+ validated = true;
+ break;
+
+ default:
+ /* Various driver options need no special processing at this
+ point, having been handled in a prescan above or being
+ handled by specs. */
+ break;
+ }
+
+ if (do_save)
+ save_switch (decoded->canonical_option[0],
+ decoded->canonical_option_num_elements - 1,
+ &decoded->canonical_option[1], validated);
+ return true;
+}
+
+/* Put the driver's standard set of option handlers in *HANDLERS. */
+
+static void
+set_option_handlers (struct cl_option_handlers *handlers)
+{
+ handlers->unknown_option_callback = driver_unknown_option_callback;
+ handlers->wrong_lang_callback = driver_wrong_lang_callback;
+ handlers->post_handling_callback = driver_post_handling_callback;
+ handlers->num_handlers = 1;
+ handlers->handlers[0].handler = driver_handle_option;
+ handlers->handlers[0].mask = CL_DRIVER;
+}
+
+/* Create the vector `switches' and its contents.
+ Store its length in `n_switches'. */
+
+static void
+process_command (unsigned int decoded_options_count,
+ struct cl_decoded_option *decoded_options)
+{
+ const char *temp;
+ char *temp1;
+ const char *tooldir_prefix;
+ char *(*get_relative_prefix) (const char *, const char *,
+ const char *) = NULL;
+ struct cl_option_handlers handlers;
+ unsigned int j;
+
+ gcc_exec_prefix = getenv ("GCC_EXEC_PREFIX");
+
+ n_switches = 0;
+ n_infiles = 0;
+ added_libraries = 0;
+
+ /* Figure compiler version from version string. */
+
+ compiler_version = temp1 = xstrdup (version_string);
+
+ for (; *temp1; ++temp1)
+ {
+ if (*temp1 == ' ')
+ {
+ *temp1 = '\0';
+ break;
+ }
+ }
/* Handle any -no-canonical-prefixes flag early, to assign the function
that builds relative prefixes. This function creates default search
paths that are needed later in normal option handling. */
- for (i = 1; i < argc; i++)
+ for (j = 1; j < decoded_options_count; j++)
{
- if (! strcmp (argv[i], "-no-canonical-prefixes"))
+ if (decoded_options[j].opt_index == OPT_no_canonical_prefixes)
{
get_relative_prefix = make_relative_prefix_ignore_links;
break;
get_relative_prefix = make_relative_prefix;
/* Set up the default search paths. If there is no GCC_EXEC_PREFIX,
- see if we can create it from the pathname specified in argv[0]. */
+ see if we can create it from the pathname specified in
+ decoded_options[0].arg. */
gcc_libexec_prefix = standard_libexec_prefix;
#ifndef VMS
/* FIXME: make_relative_prefix doesn't yet work for VMS. */
if (!gcc_exec_prefix)
{
- gcc_exec_prefix = get_relative_prefix (argv[0],
+ gcc_exec_prefix = get_relative_prefix (decoded_options[0].arg,
standard_bindir_prefix,
standard_exec_prefix);
- gcc_libexec_prefix = get_relative_prefix (argv[0],
+ gcc_libexec_prefix = get_relative_prefix (decoded_options[0].arg,
standard_bindir_prefix,
standard_libexec_prefix);
if (gcc_exec_prefix)
#endif
/* From this point onward, gcc_exec_prefix is non-null if the toolchain
is relocated. The toolchain was either relocated using GCC_EXEC_PREFIX
- or an automatically created GCC_EXEC_PREFIX from argv[0]. */
+ or an automatically created GCC_EXEC_PREFIX from
+ decoded_options[0].arg. */
+
+ /* Do language-specific adjustment/addition of flags. */
+ lang_specific_driver (&decoded_options, &decoded_options_count,
+ &added_libraries);
if (gcc_exec_prefix)
{
{
temp = gcc_exec_prefix + len - sizeof ("/lib/gcc/") + 1;
if (IS_DIR_SEPARATOR (*temp)
- && strncmp (temp + 1, "lib", 3) == 0
+ && filename_ncmp (temp + 1, "lib", 3) == 0
&& IS_DIR_SEPARATOR (temp[4])
- && strncmp (temp + 5, "gcc", 3) == 0)
+ && filename_ncmp (temp + 5, "gcc", 3) == 0)
len -= sizeof ("/lib/gcc/") - 1;
}
/* COMPILER_PATH and LIBRARY_PATH have values
that are lists of directory names with colons. */
- GET_ENVIRONMENT (temp, "COMPILER_PATH");
+ temp = getenv ("COMPILER_PATH");
if (temp)
{
const char *startp, *endp;
}
}
- GET_ENVIRONMENT (temp, LIBRARY_PATH_ENV);
+ temp = getenv (LIBRARY_PATH_ENV);
if (temp && *cross_compile == '0')
{
const char *startp, *endp;
}
/* Use LPATH like LIBRARY_PATH (for the CMU build program). */
- GET_ENVIRONMENT (temp, "LPATH");
+ temp = getenv ("LPATH");
if (temp && *cross_compile == '0')
{
const char *startp, *endp;
}
}
- /* Scan argv twice. Here, the first time, just count how many switches
- there will be in their vector, and how many input files in theirs.
- Here we also parse the switches that cc itself uses (e.g. -v). */
-
- for (i = 1; i < argc; i++)
- {
- if (! strcmp (argv[i], "-dumpspecs"))
- {
- struct spec_list *sl;
- init_spec ();
- for (sl = specs; sl; sl = sl->next)
- printf ("*%s:\n%s\n\n", sl->name, *(sl->ptr_spec));
- if (link_command_spec)
- printf ("*link_command:\n%s\n\n", link_command_spec);
- exit (0);
- }
- else if (! strcmp (argv[i], "-dumpversion"))
- {
- printf ("%s\n", spec_version);
- exit (0);
- }
- else if (! strcmp (argv[i], "-dumpmachine"))
- {
- printf ("%s\n", spec_machine);
- exit (0);
- }
- else if (strcmp (argv[i], "-fversion") == 0)
- {
- /* translate_options () has turned --version into -fversion. */
- print_version = 1;
-
- /* We will be passing a dummy file on to the sub-processes. */
- n_infiles++;
- n_switches++;
-
- /* CPP driver cannot obtain switch from cc1_options. */
- if (is_cpp_driver)
- add_preprocessor_option ("--version", strlen ("--version"));
- add_assembler_option ("--version", strlen ("--version"));
- add_linker_option ("--version", strlen ("--version"));
- }
- else if (strcmp (argv[i], "-fhelp") == 0)
- {
- /* translate_options () has turned --help into -fhelp. */
- print_help_list = 1;
-
- /* We will be passing a dummy file on to the sub-processes. */
- n_infiles++;
- n_switches++;
-
- /* CPP driver cannot obtain switch from cc1_options. */
- if (is_cpp_driver)
- add_preprocessor_option ("--help", 6);
- add_assembler_option ("--help", 6);
- add_linker_option ("--help", 6);
- }
- else if (strncmp (argv[i], "-fhelp=", 7) == 0)
- {
- /* translate_options () has turned --help into -fhelp. */
- print_subprocess_help = 2;
-
- /* We will be passing a dummy file on to the sub-processes. */
- n_infiles++;
- n_switches++;
- }
- else if (strcmp (argv[i], "-ftarget-help") == 0)
- {
- /* translate_options() has turned --target-help into -ftarget-help. */
- print_subprocess_help = 1;
-
- /* We will be passing a dummy file on to the sub-processes. */
- n_infiles++;
- n_switches++;
-
- /* CPP driver cannot obtain switch from cc1_options. */
- if (is_cpp_driver)
- add_preprocessor_option ("--target-help", 13);
- add_assembler_option ("--target-help", 13);
- add_linker_option ("--target-help", 13);
- }
- else if (! strcmp (argv[i], "-pass-exit-codes"))
- {
- pass_exit_codes = 1;
- n_switches++;
- }
- else if (! strcmp (argv[i], "-print-search-dirs"))
- print_search_dirs = 1;
- else if (! strcmp (argv[i], "-print-libgcc-file-name"))
- print_file_name = "libgcc.a";
- else if (! strncmp (argv[i], "-print-file-name=", 17))
- print_file_name = argv[i] + 17;
- else if (! strncmp (argv[i], "-print-prog-name=", 17))
- print_prog_name = argv[i] + 17;
- else if (! strcmp (argv[i], "-print-multi-lib"))
- print_multi_lib = 1;
- else if (! strcmp (argv[i], "-print-multi-directory"))
- print_multi_directory = 1;
- else if (! strcmp (argv[i], "-print-sysroot"))
- print_sysroot = 1;
- else if (! strcmp (argv[i], "-print-multi-os-directory"))
- print_multi_os_directory = 1;
- else if (! strcmp (argv[i], "-print-sysroot-headers-suffix"))
- print_sysroot_headers_suffix = 1;
- else if (! strcmp (argv[i], "-fcompare-debug-second"))
- {
- compare_debug_second = 1;
- n_switches++;
- }
- else if (! strcmp (argv[i], "-fno-compare-debug"))
- {
- argv[i] = "-fcompare-debug=";
- goto compare_debug_with_arg;
- }
- else if (! strcmp (argv[i], "-fcompare-debug"))
- {
- argv[i] = "-fcompare-debug=-gtoggle";
- goto compare_debug_with_arg;
- }
-#define OPT "-fcompare-debug="
- else if (! strncmp (argv[i], OPT, sizeof (OPT) - 1))
- {
- const char *opt;
- compare_debug_with_arg:
- opt = argv[i] + sizeof (OPT) - 1;
-#undef OPT
- if (*opt)
- compare_debug = 1;
- else
- compare_debug = -1;
- if (compare_debug < 0)
- compare_debug_opt = NULL;
- else
- compare_debug_opt = opt;
- n_switches++;
- }
- else if (! strncmp (argv[i], "-Wa,", 4))
- {
- int prev, j;
- /* Pass the rest of this option to the assembler. */
-
- /* Split the argument at commas. */
- prev = 4;
- for (j = 4; argv[i][j]; j++)
- if (argv[i][j] == ',')
- {
- add_assembler_option (argv[i] + prev, j - prev);
- prev = j + 1;
- }
-
- /* Record the part after the last comma. */
- add_assembler_option (argv[i] + prev, j - prev);
- }
- else if (! strncmp (argv[i], "-Wp,", 4))
- {
- int prev, j;
- /* Pass the rest of this option to the preprocessor. */
-
- /* Split the argument at commas. */
- prev = 4;
- for (j = 4; argv[i][j]; j++)
- if (argv[i][j] == ',')
- {
- add_preprocessor_option (argv[i] + prev, j - prev);
- prev = j + 1;
- }
-
- /* Record the part after the last comma. */
- add_preprocessor_option (argv[i] + prev, j - prev);
- }
- else if (argv[i][0] == '+' && argv[i][1] == 'e')
- /* The +e options to the C++ front-end. */
- n_switches++;
- else if (strncmp (argv[i], "-Wl,", 4) == 0)
- {
- int j;
- /* Split the argument at commas. */
- for (j = 3; argv[i][j]; j++)
- n_infiles += (argv[i][j] == ',');
- }
- else if (strcmp (argv[i], "-Xlinker") == 0)
- {
- if (i + 1 == argc)
- fatal ("argument to '-Xlinker' is missing");
+ /* Process the options and store input files and switches in their
+ vectors. */
- n_infiles++;
- i++;
- }
- else if (strcmp (argv[i], "-Xpreprocessor") == 0)
- {
- if (i + 1 == argc)
- fatal ("argument to '-Xpreprocessor' is missing");
-
- add_preprocessor_option (argv[i+1], strlen (argv[i+1]));
- }
- else if (strcmp (argv[i], "-Xassembler") == 0)
- {
- if (i + 1 == argc)
- fatal ("argument to '-Xassembler' is missing");
-
- add_assembler_option (argv[i+1], strlen (argv[i+1]));
- }
- else if (strcmp (argv[i], "-l") == 0)
- {
- if (i + 1 == argc)
- fatal ("argument to '-l' is missing");
+ last_language_n_infiles = -1;
- n_infiles++;
- i++;
- }
- else if (strncmp (argv[i], "-l", 2) == 0)
- n_infiles++;
- else if (strcmp (argv[i], "-save-temps") == 0)
- {
- save_temps_flag = SAVE_TEMPS_CWD;
- n_switches++;
- }
- else if (strncmp (argv[i], "-save-temps=", 12) == 0)
- {
- n_switches++;
- if (strcmp (argv[i]+12, "cwd") == 0)
- save_temps_flag = SAVE_TEMPS_CWD;
- else if (strcmp (argv[i]+12, "obj") == 0
- || strcmp (argv[i]+12, "object") == 0)
- save_temps_flag = SAVE_TEMPS_OBJ;
- else
- fatal ("'%s' is an unknown -save-temps option", argv[i]);
- }
- else if (strcmp (argv[i], "-no-canonical-prefixes") == 0)
- /* Already handled as a special case, so ignored here. */
- ;
- else if (strcmp (argv[i], "-combine") == 0)
- {
- combine_flag = 1;
- n_switches++;
- }
- else if (strcmp (argv[i], "-specs") == 0)
- {
- struct user_specs *user = XNEW (struct user_specs);
- if (++i >= argc)
- fatal ("argument to '-specs' is missing");
-
- user->next = (struct user_specs *) 0;
- user->filename = argv[i];
- if (user_specs_tail)
- user_specs_tail->next = user;
- else
- user_specs_head = user;
- user_specs_tail = user;
- }
- else if (strncmp (argv[i], "-specs=", 7) == 0)
- {
- struct user_specs *user = XNEW (struct user_specs);
- if (strlen (argv[i]) == 7)
- fatal ("argument to '-specs=' is missing");
-
- user->next = (struct user_specs *) 0;
- user->filename = argv[i] + 7;
- if (user_specs_tail)
- user_specs_tail->next = user;
- else
- user_specs_head = user;
- user_specs_tail = user;
- }
- else if (strcmp (argv[i], "-time") == 0)
- report_times = 1;
- else if (strncmp (argv[i], "-time=", sizeof ("-time=") - 1) == 0)
- {
- if (report_times_to_file)
- fclose (report_times_to_file);
- report_times_to_file = fopen (argv[i] + sizeof ("-time=") - 1, "a");
- }
- else if (strcmp (argv[i], "-pipe") == 0)
- {
- /* -pipe has to go into the switches array as well as
- setting a flag. */
- use_pipes = 1;
- n_switches++;
- }
- else if (strcmp (argv[i], "-wrapper") == 0)
- {
- if (++i >= argc)
- fatal ("argument to '-wrapper' is missing");
+ set_option_handlers (&handlers);
- wrapper_string = argv[i];
- n_switches++;
- n_switches++;
- }
- else if (strcmp (argv[i], "-###") == 0)
+ for (j = 1; j < decoded_options_count; j++)
+ {
+ switch (decoded_options[j].opt_index)
{
- /* This is similar to -v except that there is no execution
- of the commands and the echoed arguments are quoted. It
- is intended for use in shell scripts to capture the
- driver-generated command line. */
- verbose_only_flag++;
- verbose_flag++;
+ case OPT_S:
+ case OPT_c:
+ case OPT_E:
+ have_c = 1;
+ break;
}
- else if (argv[i][0] == '-' && argv[i][1] != 0)
- {
- const char *p = &argv[i][1];
- int c = *p;
-
- switch (c)
- {
- case 'b':
- if (p[1] && NULL == strchr (argv[i] + 2, '-'))
- goto normal_switch;
-
- /* Fall through. */
- case 'V':
- fatal ("'-%c' must come at the start of the command line", c);
- break;
-
- case 'B':
- {
- const char *value;
- int len;
-
- if (p[1] == 0 && i + 1 == argc)
- fatal ("argument to '-B' is missing");
- if (p[1] == 0)
- value = argv[++i];
- else
- value = p + 1;
-
- len = strlen (value);
-
- /* Catch the case where the user has forgotten to append a
- directory separator to the path. Note, they may be using
- -B to add an executable name prefix, eg "i386-elf-", in
- order to distinguish between multiple installations of
- GCC in the same directory. Hence we must check to see
- if appending a directory separator actually makes a
- valid directory name. */
- if (! IS_DIR_SEPARATOR (value [len - 1])
- && is_directory (value, false))
- {
- char *tmp = XNEWVEC (char, len + 2);
- strcpy (tmp, value);
- tmp[len] = DIR_SEPARATOR;
- tmp[++ len] = 0;
- value = tmp;
- }
-
- add_prefix (&exec_prefixes, value, NULL,
- PREFIX_PRIORITY_B_OPT, 0, 0);
- add_prefix (&startfile_prefixes, value, NULL,
- PREFIX_PRIORITY_B_OPT, 0, 0);
- add_prefix (&include_prefixes, value, NULL,
- PREFIX_PRIORITY_B_OPT, 0, 0);
- n_switches++;
- }
- break;
-
- case 'v': /* Print our subcommands and print versions. */
- n_switches++;
- /* If they do anything other than exactly `-v', don't set
- verbose_flag; rather, continue on to give the error. */
- if (p[1] != 0)
- break;
- verbose_flag++;
- break;
-
- case 'S':
- case 'c':
- case 'E':
- if (p[1] == 0)
- {
- have_c = 1;
- n_switches++;
- break;
- }
- goto normal_switch;
-
- case 'o':
- have_o = 1;
-#if defined(HAVE_TARGET_EXECUTABLE_SUFFIX)
- if (! have_c)
- {
- int skip;
-
- /* Forward scan, just in case -S, -E or -c is specified
- after -o. */
- int j = i + 1;
- if (p[1] == 0)
- ++j;
- while (j < argc)
- {
- if (argv[j][0] == '-')
- {
- if (SWITCH_CURTAILS_COMPILATION (argv[j][1])
- && argv[j][2] == 0)
- {
- have_c = 1;
- break;
- }
- else if ((skip = SWITCH_TAKES_ARG (argv[j][1])))
- j += skip - (argv[j][2] != 0);
- else if ((skip = WORD_SWITCH_TAKES_ARG (argv[j] + 1)))
- j += skip;
- }
- j++;
- }
- }
-#endif
-#if defined(HAVE_TARGET_EXECUTABLE_SUFFIX) || defined(HAVE_TARGET_OBJECT_SUFFIX)
- if (p[1] == 0)
- argv[i + 1] = convert_filename (argv[i + 1], ! have_c, 0);
- else
- argv[i] = convert_filename (argv[i], ! have_c, 0);
-#endif
- /* Save the output name in case -save-temps=obj was used. */
- if ((p[1] == 0) && argv[i + 1])
- save_temps_prefix = xstrdup(argv[i + 1]);
- else
- save_temps_prefix = xstrdup(argv[i] + 1);
- goto normal_switch;
-
- default:
- normal_switch:
-
-#ifdef MODIFY_TARGET_NAME
- is_modify_target_name = 0;
-
- for (j = 0; j < ARRAY_SIZE (modify_target); j++)
- if (! strcmp (argv[i], modify_target[j].sw))
- {
- char *new_name = XNEWVEC (char, strlen (modify_target[j].str)
- + strlen (spec_machine));
- const char *p, *r;
- char *q;
- int made_addition = 0;
-
- is_modify_target_name = 1;
- for (p = spec_machine, q = new_name; *p != 0; )
- {
- if (modify_target[j].add_del == DELETE
- && (! strncmp (q, modify_target[j].str,
- strlen (modify_target[j].str))))
- p += strlen (modify_target[j].str);
- else if (modify_target[j].add_del == ADD
- && ! made_addition && *p == '-')
- {
- for (r = modify_target[j].str; *r != 0; )
- *q++ = *r++;
- made_addition = 1;
- }
-
- *q++ = *p++;
- }
-
- spec_machine = new_name;
- }
+ if (have_c)
+ break;
+ }
- if (is_modify_target_name)
- break;
+ for (j = 1; j < decoded_options_count; j++)
+ {
+ if (decoded_options[j].opt_index == OPT_SPECIAL_input_file)
+ {
+ const char *arg = decoded_options[j].arg;
+ const char *p = strrchr (arg, '@');
+ char *fname;
+ long offset;
+ int consumed;
+#ifdef HAVE_TARGET_OBJECT_SUFFIX
+ arg = convert_filename (arg, 0, access (arg, F_OK));
#endif
-
- n_switches++;
-
- if (SWITCH_TAKES_ARG (c) > (p[1] != 0))
- i += SWITCH_TAKES_ARG (c) - (p[1] != 0);
- else if (WORD_SWITCH_TAKES_ARG (p))
- i += WORD_SWITCH_TAKES_ARG (p);
+ /* For LTO static archive support we handle input file
+ specifications that are composed of a filename and
+ an offset like FNAME@OFFSET. */
+ if (p
+ && p != arg
+ && sscanf (p, "@%li%n", &offset, &consumed) >= 1
+ && strlen (p) == (unsigned int)consumed)
+ {
+ fname = (char *)xmalloc (p - arg + 1);
+ memcpy (fname, arg, p - arg);
+ fname[p - arg] = '\0';
+ /* Only accept non-stdin and existing FNAME parts, otherwise
+ try with the full name. */
+ if (strcmp (fname, "-") == 0 || access (fname, F_OK) < 0)
+ {
+ free (fname);
+ fname = xstrdup (arg);
+ }
}
+ else
+ fname = xstrdup (arg);
+
+ if (strcmp (fname, "-") != 0 && access (fname, F_OK) < 0)
+ perror_with_name (fname);
+ else
+ add_infile (arg, spec_lang);
+
+ free (fname);
+ continue;
}
- else
- {
- n_infiles++;
- lang_n_infiles++;
- }
+
+ read_cmdline_option (&global_options, &global_options_set,
+ decoded_options + j, UNKNOWN_LOCATION,
+ CL_DRIVER, &handlers, global_dc);
}
/* If -save-temps=obj and -o name, create the prefix to use for %b.
{
/* -save-temps overrides -pipe, so that temp files are produced */
if (save_temps_flag)
- error ("warning: -pipe ignored because -save-temps specified");
+ warning (0, "-pipe ignored because -save-temps specified");
use_pipes = 0;
}
{
compare_debug = 2;
compare_debug_opt = gcd;
- n_switches++;
}
else if (gcd && *gcd && strcmp (gcd, "0"))
{
compare_debug = 3;
compare_debug_opt = "-gtoggle";
- n_switches++;
}
}
else if (compare_debug < 0)
then consider it to relocate with the rest of the GCC installation
if GCC_EXEC_PREFIX is set.
``make_relative_prefix'' is not compiled for VMS, so don't call it. */
- if (target_system_root && gcc_exec_prefix)
+ if (target_system_root && !target_system_root_changed && gcc_exec_prefix)
{
- char *tmp_prefix = get_relative_prefix (argv[0],
+ char *tmp_prefix = get_relative_prefix (decoded_options[0].arg,
standard_bindir_prefix,
target_system_root);
if (tmp_prefix && access_check (tmp_prefix, F_OK) == 0)
/* More prefixes are enabled in main, after we read the specs file
and determine whether this is cross-compilation or not. */
- /* Then create the space for the vectors and scan again. */
-
- switches = XNEWVEC (struct switchstr, n_switches + 1);
- infiles = XNEWVEC (struct infile, n_infiles + 1);
- n_switches = 0;
- n_infiles = 0;
- last_language_n_infiles = -1;
-
- /* This, time, copy the text of each switch and store a pointer
- to the copy in the vector of switches.
- Store all the infiles in their vector. */
-
- for (i = 1; i < argc; i++)
- {
- /* Just skip the switches that were handled by the preceding loop. */
-#ifdef MODIFY_TARGET_NAME
- is_modify_target_name = 0;
-
- for (j = 0; j < ARRAY_SIZE (modify_target); j++)
- if (! strcmp (argv[i], modify_target[j].sw))
- is_modify_target_name = 1;
-
- if (is_modify_target_name)
- ;
- else
-#endif
- if (! strncmp (argv[i], "-Wa,", 4))
- ;
- else if (! strncmp (argv[i], "-Wp,", 4))
- ;
- else if (! strcmp (argv[i], "-no-canonical-prefixes"))
- ;
- else if (! strcmp (argv[i], "-pass-exit-codes"))
- ;
- else if (! strcmp (argv[i], "-print-search-dirs"))
- ;
- else if (! strcmp (argv[i], "-print-libgcc-file-name"))
- ;
- else if (! strncmp (argv[i], "-print-file-name=", 17))
- ;
- else if (! strncmp (argv[i], "-print-prog-name=", 17))
- ;
- else if (! strcmp (argv[i], "-print-multi-lib"))
- ;
- else if (! strcmp (argv[i], "-print-multi-directory"))
- ;
- else if (! strcmp (argv[i], "-print-sysroot"))
- ;
- else if (! strcmp (argv[i], "-print-multi-os-directory"))
- ;
- else if (! strcmp (argv[i], "-print-sysroot-headers-suffix"))
- ;
- else if (! strncmp (argv[i], "--sysroot=", strlen ("--sysroot=")))
- {
- target_system_root = argv[i] + strlen ("--sysroot=");
- target_system_root_changed = 1;
- }
- else if (argv[i][0] == '+' && argv[i][1] == 'e')
- {
- /* Compensate for the +e options to the C++ front-end;
- they're there simply for cfront call-compatibility. We do
- some magic in default_compilers to pass them down properly.
- Note we deliberately start at the `+' here, to avoid passing
- -e0 or -e1 down into the linker. */
- switches[n_switches].part1 = &argv[i][0];
- switches[n_switches].args = 0;
- switches[n_switches].live_cond = 0;
- switches[n_switches].validated = 0;
- n_switches++;
- }
- else if (strncmp (argv[i], "-Wl,", 4) == 0)
- {
- int prev, j;
- /* Split the argument at commas. */
- prev = 4;
- for (j = 4; argv[i][j]; j++)
- if (argv[i][j] == ',')
- {
- infiles[n_infiles].language = "*";
- infiles[n_infiles++].name
- = save_string (argv[i] + prev, j - prev);
- prev = j + 1;
- }
- /* Record the part after the last comma. */
- infiles[n_infiles].language = "*";
- infiles[n_infiles++].name = argv[i] + prev;
- }
- else if (strcmp (argv[i], "-Xlinker") == 0)
- {
- infiles[n_infiles].language = "*";
- infiles[n_infiles++].name = argv[++i];
- }
- /* Xassembler and Xpreprocessor were already handled in the first argv
- scan, so all we need to do here is ignore them and their argument. */
- else if (strcmp (argv[i], "-Xassembler") == 0)
- i++;
- else if (strcmp (argv[i], "-Xpreprocessor") == 0)
- i++;
- else if (strcmp (argv[i], "-l") == 0)
- { /* POSIX allows separation of -l and the lib arg;
- canonicalize by concatenating -l with its arg */
- infiles[n_infiles].language = "*";
- infiles[n_infiles++].name = concat ("-l", argv[++i], NULL);
- }
- else if (strncmp (argv[i], "-l", 2) == 0)
- {
- infiles[n_infiles].language = "*";
- infiles[n_infiles++].name = argv[i];
- }
- else if (strcmp (argv[i], "-wrapper") == 0)
- i++;
- else if (strcmp (argv[i], "-specs") == 0)
- i++;
- else if (strncmp (argv[i], "-specs=", 7) == 0)
- ;
- else if (strcmp (argv[i], "-time") == 0)
- ;
- else if (strncmp (argv[i], "-time=", sizeof ("-time=") - 1) == 0)
- ;
- else if (strcmp (argv[i], "-###") == 0)
- ;
- else if (argv[i][0] == '-' && argv[i][1] != 0)
- {
- const char *p = &argv[i][1];
- int c = *p;
-
- if (c == 'x')
- {
- if (p[1] == 0 && i + 1 == argc)
- fatal ("argument to '-x' is missing");
- if (p[1] == 0)
- spec_lang = argv[++i];
- else
- spec_lang = p + 1;
- if (! strcmp (spec_lang, "none"))
- /* Suppress the warning if -xnone comes after the last input
- file, because alternate command interfaces like g++ might
- find it useful to place -xnone after each input file. */
- spec_lang = 0;
- else
- last_language_n_infiles = n_infiles;
- continue;
- }
- switches[n_switches].part1 = p;
- /* Deal with option arguments in separate argv elements. */
- if ((SWITCH_TAKES_ARG (c) > (p[1] != 0))
- || WORD_SWITCH_TAKES_ARG (p))
- {
- int j = 0;
- int n_args = WORD_SWITCH_TAKES_ARG (p);
-
- if (n_args == 0)
- {
- /* Count only the option arguments in separate argv elements. */
- n_args = SWITCH_TAKES_ARG (c) - (p[1] != 0);
- }
- if (i + n_args >= argc)
- fatal ("argument to '-%s' is missing", p);
- switches[n_switches].args
- = XNEWVEC (const char *, n_args + 1);
- while (j < n_args)
- switches[n_switches].args[j++] = argv[++i];
- /* Null-terminate the vector. */
- switches[n_switches].args[j] = 0;
- }
- else if (strchr (switches_need_spaces, c))
- {
- /* On some systems, ld cannot handle some options without
- a space. So split the option from its argument. */
- char *part1 = XNEWVEC (char, 2);
- part1[0] = c;
- part1[1] = '\0';
-
- switches[n_switches].part1 = part1;
- switches[n_switches].args = XNEWVEC (const char *, 2);
- switches[n_switches].args[0] = xstrdup (p+1);
- switches[n_switches].args[1] = 0;
- }
- else
- switches[n_switches].args = 0;
-
- switches[n_switches].live_cond = 0;
- switches[n_switches].validated = 0;
- switches[n_switches].ordering = 0;
- /* These are always valid, since gcc.c itself understands the
- first four and gfortranspec.c understands -static-libgfortran. */
- if (!strcmp (p, "save-temps")
- || !strcmp (p, "static-libgcc")
- || !strcmp (p, "shared-libgcc")
- || !strcmp (p, "pipe")
- || !strcmp (p, "static-libgfortran"))
- switches[n_switches].validated = 1;
- else
- {
- char ch = switches[n_switches].part1[0];
- if (ch == 'B')
- switches[n_switches].validated = 1;
- }
- n_switches++;
- }
- else
- {
- const char *p = strchr (argv[i], '@');
- char *fname;
-#ifdef HAVE_TARGET_OBJECT_SUFFIX
- argv[i] = convert_filename (argv[i], 0, access (argv[i], F_OK));
-#endif
- if (!p)
- fname = xstrdup (argv[i]);
- else
- {
- fname = (char *)xmalloc (p - argv[i] + 1);
- memcpy (fname, argv[i], p - argv[i]);
- fname[p - argv[i]] = '\0';
- }
-
- if (strcmp (fname, "-") != 0 && access (fname, F_OK) < 0)
- {
- perror_with_name (fname);
- error_count++;
- }
- else
- {
- infiles[n_infiles].language = spec_lang;
- infiles[n_infiles++].name = argv[i];
- }
-
- free (fname);
- }
- }
-
if (n_infiles == last_language_n_infiles && spec_lang != 0)
- error ("warning: '-x %s' after last input file has no effect", spec_lang);
+ warning (0, "%<-x %s%> after last input file has no effect", spec_lang);
if (compare_debug == 2 || compare_debug == 3)
{
+ alloc_switch ();
switches[n_switches].part1 = concat ("fcompare-debug=",
compare_debug_opt,
NULL);
/* Ensure we only invoke each subprocess once. */
if (print_subprocess_help || print_help_list || print_version)
{
- n_infiles = 1;
+ n_infiles = 0;
/* Create a dummy input file, so that we can pass
the help option on to the various sub-processes. */
- infiles[0].language = "c";
- infiles[0].name = "help-dummy";
+ add_infile ("help-dummy", "c");
}
+ alloc_switch ();
switches[n_switches].part1 = 0;
+ alloc_infile ();
infiles[n_infiles].name = 0;
}
first_time = FALSE;
/* Ignore elided switches. */
- if ((switches[i].live_cond & SWITCH_IGNORE) != 0)
+ if ((switches[i].live_cond
+ & (SWITCH_IGNORE | SWITCH_KEEP_FOR_GCC))
+ == SWITCH_IGNORE)
continue;
obstack_grow (&collect_obstack, "'-", 2);
sans all directory names, and basename_length is the number
of characters starting there excluding the suffix .c or whatever. */
-static const char *input_filename;
+static const char *gcc_input_filename;
static int input_file_number;
size_t input_filename_length;
static int basename_length;
if (full_script_path == NULL)
{
- error (_("unable to locate default linker script '%s' in the library search paths"), string);
+ error ("unable to locate default linker script %qs in the library search paths", string);
/* Script was not found on search path. */
return;
}
int i;
char *buf = xstrdup (wrapper);
char *p = buf;
+ unsigned int old_length = VEC_length (const_char_p, argbuf);
do
{
}
while ((p = strchr (p, ',')) != NULL);
- if (argbuf_index + n >= argbuf_length)
- {
- argbuf_length = argbuf_length * 2;
- while (argbuf_length < argbuf_index + n)
- argbuf_length *= 2;
- argbuf = XRESIZEVEC (const char *, argbuf, argbuf_length);
- }
- for (i = argbuf_index - 1; i >= 0; i--)
- argbuf[i + n] = argbuf[i];
+ VEC_safe_grow (const_char_p, heap, argbuf, old_length + n);
+ memmove (VEC_address (const_char_p, argbuf) + n,
+ VEC_address (const_char_p, argbuf),
+ old_length * sizeof (const_char_p));
i = 0;
p = buf;
*p = 0;
p++;
}
- argbuf[i++] = p;
+ VEC_replace (const_char_p, argbuf, i, p);
+ i++;
}
while ((p = strchr (p, ',')) != NULL);
gcc_assert (i == n);
- argbuf_index += n;
}
/* Process the spec SPEC and run the commands specified therein.
If -pipe, this forces out the last command if it ended in `|'. */
if (value == 0)
{
- if (argbuf_index > 0 && !strcmp (argbuf[argbuf_index - 1], "|"))
- argbuf_index--;
+ if (VEC_length (const_char_p, argbuf) > 0
+ && !strcmp (VEC_last (const_char_p, argbuf), "|"))
+ VEC_pop (const_char_p, argbuf);
set_collect_gcc_options ();
- if (argbuf_index > 0)
+ if (VEC_length (const_char_p, argbuf) > 0)
value = execute ();
}
static void
do_self_spec (const char *spec)
{
+ int i;
+
do_spec_2 (spec);
do_spec_1 (" ", 0, NULL);
- if (argbuf_index > 0)
- {
- int i;
-
- switches = XRESIZEVEC (struct switchstr, switches,
- n_switches + argbuf_index + 1);
+ /* Mark %<S switches processed by do_self_spec to be ignored permanently.
+ do_self_specs adds the replacements to switches array, so it shouldn't
+ be processed afterwards. */
+ for (i = 0; i < n_switches; i++)
+ if ((switches[i].live_cond & SWITCH_IGNORE))
+ switches[i].live_cond |= SWITCH_IGNORE_PERMANENTLY;
- for (i = 0; i < argbuf_index; i++)
+ if (VEC_length (const_char_p, argbuf) > 0)
+ {
+ const char **argbuf_copy;
+ struct cl_decoded_option *decoded_options;
+ struct cl_option_handlers handlers;
+ unsigned int decoded_options_count;
+ unsigned int j;
+
+ /* Create a copy of argbuf with a dummy argv[0] entry for
+ decode_cmdline_options_to_array. */
+ argbuf_copy = XNEWVEC (const char *,
+ VEC_length (const_char_p, argbuf) + 1);
+ argbuf_copy[0] = "";
+ memcpy (argbuf_copy + 1, VEC_address (const_char_p, argbuf),
+ VEC_length (const_char_p, argbuf) * sizeof (const char *));
+
+ decode_cmdline_options_to_array (VEC_length (const_char_p, argbuf) + 1,
+ argbuf_copy,
+ CL_DRIVER, &decoded_options,
+ &decoded_options_count);
+
+ set_option_handlers (&handlers);
+
+ for (j = 1; j < decoded_options_count; j++)
{
- struct switchstr *sw;
- const char *p = argbuf[i];
- int c = *p;
-
- /* Each switch should start with '-'. */
- if (c != '-')
- fatal ("switch '%s' does not start with '-'", argbuf[i]);
-
- p++;
- c = *p;
-
- sw = &switches[n_switches++];
- sw->part1 = p;
- sw->live_cond = 0;
- sw->validated = 0;
- sw->ordering = 0;
-
- /* Deal with option arguments in separate argv elements. */
- if ((SWITCH_TAKES_ARG (c) > (p[1] != 0))
- || WORD_SWITCH_TAKES_ARG (p))
+ switch (decoded_options[j].opt_index)
{
- int j = 0;
- int n_args = WORD_SWITCH_TAKES_ARG (p);
+ case OPT_SPECIAL_input_file:
+ /* Specs should only generate options, not input
+ files. */
+ if (strcmp (decoded_options[j].arg, "-") != 0)
+ fatal_error ("switch %qs does not start with %<-%>",
+ decoded_options[j].arg);
+ else
+ fatal_error ("spec-generated switch is just %<-%>");
+ break;
- if (n_args == 0)
- {
- /* Count only the option arguments in separate argv elements. */
- n_args = SWITCH_TAKES_ARG (c) - (p[1] != 0);
- }
- if (i + n_args >= argbuf_index)
- fatal ("argument to '-%s' is missing", p);
- sw->args
- = XNEWVEC (const char *, n_args + 1);
- while (j < n_args)
- sw->args[j++] = argbuf[++i];
- /* Null-terminate the vector. */
- sw->args[j] = 0;
- }
- else if (strchr (switches_need_spaces, c))
- {
- /* On some systems, ld cannot handle some options without
- a space. So split the option from its argument. */
- char *part1 = XNEWVEC (char, 2);
- part1[0] = c;
- part1[1] = '\0';
-
- sw->part1 = part1;
- sw->args = XNEWVEC (const char *, 2);
- sw->args[0] = xstrdup (p+1);
- sw->args[1] = 0;
+ case OPT_fcompare_debug_second:
+ case OPT_fcompare_debug:
+ case OPT_fcompare_debug_:
+ case OPT_o:
+ /* Avoid duplicate processing of some options from
+ compare-debug specs; just save them here. */
+ save_switch (decoded_options[j].canonical_option[0],
+ (decoded_options[j].canonical_option_num_elements
+ - 1),
+ &decoded_options[j].canonical_option[1], false);
+ break;
+
+ default:
+ read_cmdline_option (&global_options, &global_options_set,
+ decoded_options + j, UNKNOWN_LOCATION,
+ CL_DRIVER, &handlers, global_dc);
+ break;
}
- else
- sw->args = 0;
}
+ alloc_switch ();
switches[n_switches].part1 = 0;
}
}
int status;
if (f == NULL)
- fatal ("could not open temporary response file %s",
- temp_file);
+ fatal_error ("could not open temporary response file %s",
+ temp_file);
status = writeargv (argv, f);
if (status)
- fatal ("could not write to temporary response file %s",
- temp_file);
+ fatal_error ("could not write to temporary response file %s",
+ temp_file);
status = fclose (f);
if (EOF == status)
- fatal ("could not close temporary response file %s",
- temp_file);
+ fatal_error ("could not close temporary response file %s",
+ temp_file);
store_arg (at_argument, 0, 0);
return false;
}
+/* Process each member of VEC as a spec. */
+
+static void
+do_specs_vec (VEC(char_p,heap) *vec)
+{
+ unsigned ix;
+ char *opt;
+
+ FOR_EACH_VEC_ELT (char_p, vec, ix, opt)
+ {
+ do_spec_1 (opt, 1, NULL);
+ /* Make each accumulated option a separate argument. */
+ do_spec_1 (" ", 0, NULL);
+ }
+}
+
/* Process the sub-spec SPEC as a portion of a larger spec.
This is like processing a whole spec except that we do
not initialize at the beginning and we do not supply a
int i;
int value;
+ /* If it's an empty string argument to a switch, keep it as is. */
+ if (inswitch && !*p)
+ arg_going = 1;
+
while ((c = *p++))
/* If substituting a switch, treat all chars like letters.
Otherwise, NL, SPC, TAB and % are special. */
case '\n':
end_going_arg ();
- if (argbuf_index > 0 && !strcmp (argbuf[argbuf_index - 1], "|"))
+ if (VEC_length (const_char_p, argbuf) > 0
+ && !strcmp (VEC_last (const_char_p, argbuf), "|"))
{
/* A `|' before the newline means use a pipe here,
but only if -pipe was specified.
break;
}
else
- argbuf_index--;
+ VEC_pop (const_char_p, argbuf);
}
set_collect_gcc_options ();
- if (argbuf_index > 0)
+ if (VEC_length (const_char_p, argbuf) > 0)
{
value = execute ();
if (value)
switch (c = *p++)
{
case 0:
- fatal ("spec '%s' invalid", spec);
+ fatal_error ("spec %qs invalid", spec);
case 'b':
if (save_temps_length)
buf = (char *) alloca (p - q + 1);
strncpy (buf, q, p - q);
buf[p - q] = 0;
- error ("%s", buf);
+ error ("%s", _(buf));
return -1;
}
break;
buf = (char *) alloca (p - q + 1);
strncpy (buf, q, p - q);
buf[p - q] = 0;
- notice ("%s\n", buf);
+ inform (0, "%s", _(buf));
if (*p)
p++;
}
p += 2;
/* We don't support extra suffix characters after %O. */
if (*p == '.' || ISALNUM ((unsigned char) *p))
- fatal ("spec '%s' has invalid '%%0%c'", spec, *p);
+ fatal_error ("spec %qs has invalid %<%%0%c%>", spec, *p);
if (suffix_length == 0)
suffix = TARGET_OBJECT_SUFFIX;
else
break;
}
- /* If the input_filename has the same suffix specified
+ /* If the gcc_input_filename has the same suffix specified
for the %g, %u, or %U, and -save-temps is specified,
we could end up using that file as an intermediate
thus clobbering the user's source file (.e.g.,
tmp[basename_length + suffix_length] = '\0';
temp_filename = tmp;
- if (strcmp (temp_filename, input_filename) != 0)
+ if (filename_cmp (temp_filename, gcc_input_filename) != 0)
{
#ifndef HOST_LACKS_INODE_NUMBERS
struct stat st_temp;
/* Note, set_input() resets input_stat_set to 0. */
if (input_stat_set == 0)
{
- input_stat_set = stat (input_filename, &input_stat);
+ input_stat_set = stat (gcc_input_filename,
+ &input_stat);
if (input_stat_set >= 0)
input_stat_set = 1;
}
- /* If we have the stat for the input_filename
+ /* If we have the stat for the gcc_input_filename
and we can do the stat for the temp_filename
then the they could still refer to the same
file if st_dev/st_ino's are the same. */
|| input_stat.st_ino != st_temp.st_ino)
#else
/* Just compare canonical pathnames. */
- char* input_realname = lrealpath (input_filename);
+ char* input_realname = lrealpath (gcc_input_filename);
char* temp_realname = lrealpath (temp_filename);
- bool files_differ = strcmp (input_realname, temp_realname);
+ bool files_differ = filename_cmp (input_realname, temp_realname);
free (input_realname);
free (temp_realname);
if (files_differ)
t->filename_length = temp_filename_length;
}
- if (saved_suffix)
- free (saved_suffix);
+ free (saved_suffix);
obstack_grow (&obstack, t->filename, t->filename_length);
delete_this_arg = 1;
}
else
{
- obstack_grow (&obstack, input_filename, input_filename_length);
+ obstack_grow (&obstack, gcc_input_filename,
+ input_filename_length);
arg_going = 1;
}
break;
case 'W':
{
- int cur_index = argbuf_index;
+ unsigned int cur_index = VEC_length (const_char_p, argbuf);
/* Handle the {...} following the %W. */
if (*p != '{')
- fatal ("spec '%s' has invalid '%%W%c", spec, *p);
+ fatal_error ("spec %qs has invalid %<%%W%c%>", spec, *p);
p = handle_braces (p + 1);
if (p == 0)
return -1;
end_going_arg ();
/* If any args were output, mark the last one for deletion
on failure. */
- if (argbuf_index != cur_index)
- record_temp_file (argbuf[argbuf_index - 1], 0, 1);
+ if (VEC_length (const_char_p, argbuf) != cur_index)
+ record_temp_file (VEC_last (const_char_p, argbuf), 0, 1);
break;
}
{
const char *p1 = p;
char *string;
+ char *opt;
+ unsigned ix;
/* Skip past the option value and make a copy. */
if (*p != '{')
- fatal ("spec '%s' has invalid '%%x%c'", spec, *p);
+ fatal_error ("spec %qs has invalid %<%%x%c%>", spec, *p);
while (*p++ != '}')
;
string = save_string (p1 + 1, p - p1 - 2);
/* See if we already recorded this option. */
- for (i = 0; i < n_linker_options; i++)
- if (! strcmp (string, linker_options[i]))
+ FOR_EACH_VEC_ELT (char_p, linker_options, ix, opt)
+ if (! strcmp (string, opt))
{
free (string);
return 0;
/* Dump out the options accumulated previously using %x. */
case 'X':
- for (i = 0; i < n_linker_options; i++)
- {
- do_spec_1 (linker_options[i], 1, NULL);
- /* Make each accumulated option a separate argument. */
- do_spec_1 (" ", 0, NULL);
- }
+ do_specs_vec (linker_options);
break;
/* Dump out the options accumulated previously using -Wa,. */
case 'Y':
- for (i = 0; i < n_assembler_options; i++)
- {
- do_spec_1 (assembler_options[i], 1, NULL);
- /* Make each accumulated option a separate argument. */
- do_spec_1 (" ", 0, NULL);
- }
+ do_specs_vec (assembler_options);
break;
/* Dump out the options accumulated previously using -Wp,. */
case 'Z':
- for (i = 0; i < n_preprocessor_options; i++)
- {
- do_spec_1 (preprocessor_options[i], 1, NULL);
- /* Make each accumulated option a separate argument. */
- do_spec_1 (" ", 0, NULL);
- }
+ do_specs_vec (preprocessor_options);
break;
/* Here are digits and numbers that just process
/* Henceforth ignore the option(s) matching the pattern
after the %<. */
case '<':
+ case '>':
{
unsigned len = 0;
int have_wildcard = 0;
int i;
+ int switch_option;
+
+ if (c == '>')
+ switch_option = SWITCH_IGNORE | SWITCH_KEEP_FOR_GCC;
+ else
+ switch_option = SWITCH_IGNORE;
while (p[len] && p[len] != ' ' && p[len] != '\t')
len++;
if (!strncmp (switches[i].part1, p, len - have_wildcard)
&& (have_wildcard || switches[i].part1[len] == '\0'))
{
- switches[i].live_cond |= SWITCH_IGNORE;
+ switches[i].live_cond |= switch_option;
switches[i].validated = 1;
}
case '*':
if (soft_matched_part)
{
- do_spec_1 (soft_matched_part, 1, NULL);
+ if (soft_matched_part[0])
+ do_spec_1 (soft_matched_part, 1, NULL);
do_spec_1 (" ", 0, NULL);
}
else
/* Catch the case where a spec string contains something like
'%{foo:%*}'. i.e. there is no * in the pattern on the left
hand side of the :. */
- error ("spec failure: '%%*' has not been initialized by pattern match");
+ error ("spec failure: %<%%*%> has not been initialized by pattern match");
break;
/* Process a string found as the value of a spec given by name.
%[...] modifies -D options the way %P does;
%(...) uses the spec unmodified. */
case '[':
- error ("warning: use of obsolete %%[ operator in specs");
+ warning (0, "use of obsolete %%[ operator in specs");
case '(':
{
const char *name = p;
{
name = *(sl->ptr_spec);
#ifdef DEBUG_SPECS
- notice ("Processing spec %c%s%c, which is '%s'\n",
+ fnotice (stderr, "Processing spec %c%s%c, which is '%s'\n",
c, sl->name, (c == '(') ? ')' : ']', name);
#endif
break;
break;
default:
- error ("spec failure: unrecognized spec option '%c'", c);
+ error ("spec failure: unrecognized spec option %qc", c);
break;
}
break;
const char *funcval;
/* Saved spec processing context. */
- int save_argbuf_index;
- int save_argbuf_length;
- const char **save_argbuf;
+ VEC(const_char_p,heap) *save_argbuf;
int save_arg_going;
int save_delete_this_arg;
sf = lookup_spec_function (func);
if (sf == NULL)
- fatal ("unknown spec function '%s'", func);
+ fatal_error ("unknown spec function %qs", func);
/* Push the spec processing context. */
- save_argbuf_index = argbuf_index;
- save_argbuf_length = argbuf_length;
save_argbuf = argbuf;
save_arg_going = arg_going;
alloc_args ();
if (do_spec_2 (args) < 0)
- fatal ("error in args to spec function '%s'", func);
+ fatal_error ("error in args to spec function %qs", func);
/* argbuf_index is an index for the next argument to be inserted, and
so contains the count of the args already inserted. */
- funcval = (*sf->func) (argbuf_index, argbuf);
+ funcval = (*sf->func) (VEC_length (const_char_p, argbuf),
+ VEC_address (const_char_p, argbuf));
/* Pop the spec processing context. */
- argbuf_index = save_argbuf_index;
- argbuf_length = save_argbuf_length;
- free (argbuf);
+ VEC_free (const_char_p, heap, argbuf);
argbuf = save_argbuf;
arg_going = save_arg_going;
break;
/* Only allow [A-Za-z0-9], -, and _ in function names. */
if (!ISALNUM (*endp) && !(*endp == '-' || *endp == '_'))
- fatal ("malformed spec function name");
+ fatal_error ("malformed spec function name");
}
if (*endp != '(') /* ) */
- fatal ("no arguments for spec function");
+ fatal_error ("no arguments for spec function");
func = save_string (p, endp - p);
p = ++endp;
}
/* ( */
if (*endp != ')')
- fatal ("malformed spec function arguments");
+ fatal_error ("malformed spec function arguments");
args = save_string (p, endp - p);
p = ++endp;
return p;
invalid:
- fatal ("braced spec '%s' is invalid at '%c'", orig, *p);
+ fatal_error ("braced spec %qs is invalid at %qc", orig, *p);
#undef SKIP_WHITE
}
return p;
invalid:
- fatal ("braced spec body '%s' is invalid", body);
+ fatal_error ("braced spec body %qs is invalid", body);
}
\f
/* Return 0 iff switch number SWITCHNUM is obsoleted by a later switch
if (switches[switchnum].live_cond != 0)
return ((switches[switchnum].live_cond & SWITCH_LIVE) != 0
&& (switches[switchnum].live_cond & SWITCH_FALSE) == 0
- && (switches[switchnum].live_cond & SWITCH_IGNORE) == 0);
+ && (switches[switchnum].live_cond & SWITCH_IGNORE_PERMANENTLY)
+ == 0);
/* In the common case of {<at-most-one-letter>*}, a negating
switch would always match, so ignore that case. We will just
if (linker
&& IS_DIR_SEPARATOR (path[0])
&& ((cp - path == 6
- && strncmp (path + 1, "lib", 3) == 0)
+ && filename_ncmp (path + 1, "lib", 3) == 0)
|| (cp - path == 10
- && strncmp (path + 1, "usr", 3) == 0
+ && filename_ncmp (path + 1, "usr", 3) == 0
&& IS_DIR_SEPARATOR (path[4])
- && strncmp (path + 5, "lib", 3) == 0)))
+ && filename_ncmp (path + 5, "lib", 3) == 0)))
return 0;
return (stat (path, &st) >= 0 && S_ISDIR (st.st_mode));
{
const char *p;
- input_filename = filename;
- input_filename_length = strlen (input_filename);
- input_basename = lbasename (input_filename);
+ gcc_input_filename = filename;
+ input_filename_length = strlen (gcc_input_filename);
+ input_basename = lbasename (gcc_input_filename);
/* Find a suffix starting with the last period,
and set basename_length to exclude that suffix. */
input_suffix = "";
/* If a spec for 'g', 'u', or 'U' is seen with -save-temps then
- we will need to do a stat on the input_filename. The
+ we will need to do a stat on the gcc_input_filename. The
INPUT_STAT_SET signals that the stat is needed. */
input_stat_set = 0;
}
/* On fatal signals, delete all the temporary files. */
static void
-fatal_error (int signum)
+fatal_signal (int signum)
{
signal (signum, SIG_DFL);
delete_failure_queue ();
if (stat (cmpfile[i], &st) < 0 || !S_ISREG (st.st_mode))
{
error ("%s: could not determine length of compare-debug file %s",
- input_filename, cmpfile[i]);
+ gcc_input_filename, cmpfile[i]);
ret = 1;
break;
}
if (!ret && length[0] != length[1])
{
- error ("%s: -fcompare-debug failure (length)", input_filename);
+ error ("%s: -fcompare-debug failure (length)", gcc_input_filename);
ret = 1;
}
if (fd < 0)
{
error ("%s: could not open compare-debug file %s",
- input_filename, cmpfile[i]);
+ gcc_input_filename, cmpfile[i]);
ret = 1;
break;
}
{
if (memcmp (map[0], map[1], length[0]) != 0)
{
- error ("%s: -fcompare-debug failure", input_filename);
+ error ("%s: -fcompare-debug failure", gcc_input_filename);
ret = 1;
}
}
if (!temp[i])
{
error ("%s: could not open compare-debug file %s",
- input_filename, cmpfile[i]);
+ gcc_input_filename, cmpfile[i]);
ret = 1;
break;
}
if (c0 != c1)
{
error ("%s: -fcompare-debug failure",
- input_filename);
+ gcc_input_filename);
ret = 1;
break;
}
int num_linker_inputs = 0;
char *explicit_link_files;
char *specs_file;
+ char *lto_wrapper_file;
const char *p;
struct user_specs *uptr;
char **old_argv = argv;
+ struct cl_decoded_option *decoded_options;
+ unsigned int decoded_options_count;
/* Initialize here, not in definition. The IRIX 6 O32 cc sometimes chokes
on ?: in file-scope variable initializations. */
p = argv[0] + strlen (argv[0]);
while (p != argv[0] && !IS_DIR_SEPARATOR (p[-1]))
--p;
- programname = p;
+ progname = p;
- xmalloc_set_program_name (programname);
+ xmalloc_set_program_name (progname);
expandargv (&argc, &argv);
if (argv != old_argv)
at_file_supplied = true;
- prune_options (&argc, &argv);
+ global_options = global_options_init;
+
+ decode_cmdline_options_to_array (argc, CONST_CAST2 (const char **, char **,
+ argv),
+ CL_DRIVER,
+ &decoded_options, &decoded_options_count);
#ifdef GCC_DRIVER_HOST_INITIALIZATION
/* Perform host dependent initialization when needed. */
gcc_init_libintl ();
+ diagnostic_initialize (global_dc, 0);
+ if (atexit (delete_temp_files) != 0)
+ fatal_error ("atexit failed");
+
if (signal (SIGINT, SIG_IGN) != SIG_IGN)
- signal (SIGINT, fatal_error);
+ signal (SIGINT, fatal_signal);
#ifdef SIGHUP
if (signal (SIGHUP, SIG_IGN) != SIG_IGN)
- signal (SIGHUP, fatal_error);
+ signal (SIGHUP, fatal_signal);
#endif
if (signal (SIGTERM, SIG_IGN) != SIG_IGN)
- signal (SIGTERM, fatal_error);
+ signal (SIGTERM, fatal_signal);
#ifdef SIGPIPE
if (signal (SIGPIPE, SIG_IGN) != SIG_IGN)
- signal (SIGPIPE, fatal_error);
+ signal (SIGPIPE, fatal_signal);
#endif
#ifdef SIGCHLD
/* We *MUST* set SIGCHLD to SIG_DFL so that the wait4() call will
Make a table of specified input files (infiles, n_infiles).
Decode switches that are handled locally. */
- process_command (argc, CONST_CAST2 (const char **, char **, argv));
+ process_command (decoded_options_count, decoded_options);
/* Initialize the vector of specs to just the default.
This means one element containing 0s, as a terminator. */
if (!compare_debug_second)
{
n_switches_debug_check[1] = n_switches;
+ n_switches_alloc_debug_check[1] = n_switches_alloc;
switches_debug_check[1] = XDUPVEC (struct switchstr, switches,
- n_switches + 1);
+ n_switches_alloc);
do_self_spec ("%:compare-debug-self-opt()");
n_switches_debug_check[0] = n_switches;
+ n_switches_alloc_debug_check[0] = n_switches_alloc;
switches_debug_check[0] = switches;
n_switches = n_switches_debug_check[1];
+ n_switches_alloc = n_switches_alloc_debug_check[1];
switches = switches_debug_check[1];
}
if (!compare_debug_second)
{
n_switches_debug_check[1] = n_switches;
+ n_switches_alloc_debug_check[1] = n_switches_alloc;
switches_debug_check[1] = switches;
compare_debug = -compare_debug;
n_switches = n_switches_debug_check[0];
+ n_switches_alloc = n_switches_debug_check[0];
switches = switches_debug_check[0];
}
}
if (*sysroot_suffix_spec != 0
&& do_spec_2 (sysroot_suffix_spec) == 0)
{
- if (argbuf_index > 1)
+ if (VEC_length (const_char_p, argbuf) > 1)
error ("spec failure: more than one arg to SYSROOT_SUFFIX_SPEC");
- else if (argbuf_index == 1)
- target_sysroot_suffix = xstrdup (argbuf[argbuf_index -1]);
+ else if (VEC_length (const_char_p, argbuf) == 1)
+ target_sysroot_suffix = xstrdup (VEC_last (const_char_p, argbuf));
}
#ifdef HAVE_LD_SYSROOT
if (*sysroot_hdrs_suffix_spec != 0
&& do_spec_2 (sysroot_hdrs_suffix_spec) == 0)
{
- if (argbuf_index > 1)
+ if (VEC_length (const_char_p, argbuf) > 1)
error ("spec failure: more than one arg to SYSROOT_HEADERS_SUFFIX_SPEC");
- else if (argbuf_index == 1)
- target_sysroot_hdrs_suffix = xstrdup (argbuf[argbuf_index -1]);
+ else if (VEC_length (const_char_p, argbuf) == 1)
+ target_sysroot_hdrs_suffix = xstrdup (VEC_last (const_char_p, argbuf));
}
/* Look for startfiles in the standard places. */
&& do_spec_2 (startfile_prefix_spec) == 0
&& do_spec_1 (" ", 0, NULL) == 0)
{
+ const char *arg;
int ndx;
- for (ndx = 0; ndx < argbuf_index; ndx++)
- add_sysrooted_prefix (&startfile_prefixes, argbuf[ndx], "BINUTILS",
+ FOR_EACH_VEC_ELT (const_char_p, argbuf, ndx, arg)
+ add_sysrooted_prefix (&startfile_prefixes, arg, "BINUTILS",
PREFIX_PRIORITY_LAST, 0, 1);
}
/* We should eventually get rid of all these and stick to
set_multilib_dir ();
/* Set up to remember the pathname of gcc and any options
- needed for collect. We use argv[0] instead of programname because
+ needed for collect. We use argv[0] instead of progname because
we need the complete pathname. */
obstack_init (&collect_obstack);
obstack_grow (&collect_obstack, "COLLECT_GCC=", sizeof ("COLLECT_GCC=") - 1);
/* Set up to remember the pathname of the lto wrapper. */
- lto_wrapper_spec = find_a_file (&exec_prefixes, "lto-wrapper", X_OK, false);
- if (lto_wrapper_spec)
+ lto_wrapper_file = find_a_file (&exec_prefixes, "lto-wrapper", X_OK, false);
+ if (lto_wrapper_file)
{
+ lto_wrapper_spec = lto_wrapper_file;
obstack_init (&collect_obstack);
obstack_grow (&collect_obstack, "COLLECT_LTO_WRAPPER=",
sizeof ("COLLECT_LTO_WRAPPER=") - 1);
for (i = 0; (int) i < n_switches; i++)
if (! switches[i].validated)
- error ("unrecognized option '-%s'", switches[i].part1);
+ error ("unrecognized option %<-%s%>", switches[i].part1);
/* Obey some of the options. */
else
/* The error status indicates that only one set of fixed
headers should be built. */
- fatal ("not configured with sysroot headers suffix");
+ fatal_error ("not configured with sysroot headers suffix");
}
if (print_help_list)
if (print_version)
{
- printf (_("%s %s%s\n"), programname, pkgversion_string,
+ printf (_("%s %s%s\n"), progname, pkgversion_string,
version_string);
- printf ("Copyright %s 2009 Free Software Foundation, Inc.\n",
+ printf ("Copyright %s 2011 Free Software Foundation, Inc.\n",
_("(C)"));
fputs (_("This is free software; see the source for copying conditions. There is NO\n\
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n\n"),
int n;
const char *thrmod;
- notice ("Target: %s\n", spec_machine);
- notice ("Configured with: %s\n", configuration_arguments);
+ fnotice (stderr, "Target: %s\n", spec_machine);
+ fnotice (stderr, "Configured with: %s\n", configuration_arguments);
#ifdef THREAD_MODEL_SPEC
/* We could have defined THREAD_MODEL_SPEC to "%*" by default,
thrmod = thread_model;
#endif
- notice ("Thread model: %s\n", thrmod);
+ fnotice (stderr, "Thread model: %s\n", thrmod);
/* compiler_version is truncated at the first space when initialized
from version string, so truncate version_string at the first space
if (! strncmp (version_string, compiler_version, n)
&& compiler_version[n] == 0)
- notice ("gcc version %s %s\n", version_string, pkgversion_string);
+ fnotice (stderr, "gcc version %s %s\n", version_string,
+ pkgversion_string);
else
- notice ("gcc driver version %s %sexecuting gcc version %s\n",
- version_string, pkgversion_string, compiler_version);
+ fnotice (stderr, "gcc driver version %s %sexecuting gcc version %s\n",
+ version_string, pkgversion_string, compiler_version);
if (n_infiles == 0)
return (0);
}
if (n_infiles == added_libraries)
- fatal ("no input files");
+ fatal_error ("no input files");
+
+ if (seen_error ())
+ goto out;
/* Make a place to record the compiler output file names
that correspond to the input files. */
explicit_link_files = XCNEWVEC (char, n_infiles);
- if (combine_flag)
- combine_inputs = true;
- else
- combine_inputs = false;
+ combine_inputs = have_o || flag_wpa;
for (i = 0; (int) i < n_infiles; i++)
{
}
if (!combine_inputs && have_c && have_o && lang_n_infiles > 1)
- fatal ("cannot specify -o with -c, -S or -E with multiple files");
-
- if (combine_flag && save_temps_flag)
- {
- bool save_combine_inputs = combine_inputs;
- /* Must do a separate pre-processing pass for C & Objective-C files, to
- obtain individual .i files. */
-
- combine_inputs = false;
- for (i = 0; (int) i < n_infiles; i++)
- {
- int this_file_error = 0;
-
- input_file_number = i;
- set_input (infiles[i].name);
- if (infiles[i].incompiler
- && (infiles[i].incompiler)->needs_preprocessing)
- input_file_compiler = infiles[i].incompiler;
- else
- continue;
-
- if (input_file_compiler)
- {
- if (input_file_compiler->spec[0] == '#')
- {
- error ("%s: %s compiler not installed on this system",
- input_filename, &input_file_compiler->spec[1]);
- this_file_error = 1;
- }
- else
- {
- value = do_spec (input_file_compiler->spec);
- infiles[i].preprocessed = true;
- if (!have_o_argbuf_index)
- fatal ("spec '%s' is invalid", input_file_compiler->spec);
- infiles[i].name = argbuf[have_o_argbuf_index];
- infiles[i].incompiler
- = lookup_compiler (infiles[i].name,
- strlen (infiles[i].name),
- infiles[i].language);
-
- if (value < 0)
- this_file_error = 1;
- }
- }
-
- if (this_file_error)
- {
- delete_failure_queue ();
- error_count++;
- break;
- }
- clear_failure_queue ();
- }
- combine_inputs = save_combine_inputs;
- }
+ fatal_error ("cannot specify -o with -c, -S or -E with multiple files");
for (i = 0; (int) i < n_infiles; i++)
{
/* Use the same thing in %o, unless cp->spec says otherwise. */
- outfiles[i] = input_filename;
+ outfiles[i] = gcc_input_filename;
/* Figure out which compiler from the file's suffix. */
- if (! combine_inputs)
- input_file_compiler
- = lookup_compiler (infiles[i].name, input_filename_length,
- infiles[i].language);
- else
- input_file_compiler = infiles[i].incompiler;
+ input_file_compiler
+ = lookup_compiler (infiles[i].name, input_filename_length,
+ infiles[i].language);
if (input_file_compiler)
{
if (input_file_compiler->spec[0] == '#')
{
error ("%s: %s compiler not installed on this system",
- input_filename, &input_file_compiler->spec[1]);
+ gcc_input_filename, &input_file_compiler->spec[1]);
this_file_error = 1;
}
else
{
if (compare_debug)
{
- if (debug_check_temp_file[0])
- free (debug_check_temp_file[0]);
+ free (debug_check_temp_file[0]);
debug_check_temp_file[0] = NULL;
- if (debug_check_temp_file[1])
- free (debug_check_temp_file[1]);
+ free (debug_check_temp_file[1]);
debug_check_temp_file[1] = NULL;
}
else if (compare_debug && debug_check_temp_file[0])
{
if (verbose_flag)
- error ("Recompiling with -fcompare-debug");
+ inform (0, "recompiling with -fcompare-debug");
compare_debug = -compare_debug;
n_switches = n_switches_debug_check[1];
+ n_switches_alloc = n_switches_alloc_debug_check[1];
switches = switches_debug_check[1];
value = do_spec (input_file_compiler->spec);
compare_debug = -compare_debug;
n_switches = n_switches_debug_check[0];
+ n_switches_alloc = n_switches_alloc_debug_check[0];
switches = switches_debug_check[0];
if (value < 0)
}
gcc_assert (debug_check_temp_file[1]
- && strcmp (debug_check_temp_file[0],
- debug_check_temp_file[1]));
+ && filename_cmp (debug_check_temp_file[0],
+ debug_check_temp_file[1]));
if (verbose_flag)
- error ("Comparing final insns dumps");
+ inform (0, "comparing final insns dumps");
if (compare_files (debug_check_temp_file))
this_file_error = 1;
if (compare_debug)
{
- if (debug_check_temp_file[0])
- free (debug_check_temp_file[0]);
+ free (debug_check_temp_file[0]);
debug_check_temp_file[0] = NULL;
- if (debug_check_temp_file[1])
- free (debug_check_temp_file[1]);
+ free (debug_check_temp_file[1]);
debug_check_temp_file[1] = NULL;
}
}
if (this_file_error)
{
delete_failure_queue ();
- error_count++;
+ errorcount++;
}
/* If this compilation succeeded, don't delete those files later. */
clear_failure_queue ();
int i;
for (i = 0; i < n_infiles ; i++)
- if (infiles[i].language && infiles[i].language[0] != '*')
+ if (infiles[i].incompiler
+ || (infiles[i].language && infiles[i].language[0] != '*'))
{
set_input (infiles[i].name);
break;
}
}
- if (error_count == 0)
+ if (!seen_error ())
{
/* Make sure INPUT_FILE_NUMBER points to first available open
slot. */
input_file_number = n_infiles;
if (lang_specific_pre_link ())
- error_count++;
+ errorcount++;
}
/* Determine if there are any linker input files. */
/* Run ld to link all the compiler output files. */
- if (num_linker_inputs > 0 && error_count == 0 && print_subprocess_help < 2)
+ if (num_linker_inputs > 0 && !seen_error () && print_subprocess_help < 2)
{
int tmp = execution_count;
+#if HAVE_LTO_PLUGIN > 0
+#if HAVE_LTO_PLUGIN == 2
+ const char *fno_use_linker_plugin = "fno-use-linker-plugin";
+#else
const char *fuse_linker_plugin = "fuse-linker-plugin";
+#endif
+#endif
/* We'll use ld if we can't find collect2. */
if (! strcmp (linker_name_spec, "collect2"))
linker_name_spec = "ld";
}
+#if HAVE_LTO_PLUGIN > 0
+#if HAVE_LTO_PLUGIN == 2
+ if (!switch_matches (fno_use_linker_plugin,
+ fno_use_linker_plugin + strlen (fno_use_linker_plugin), 0))
+#else
if (switch_matches (fuse_linker_plugin,
fuse_linker_plugin + strlen (fuse_linker_plugin), 0))
+#endif
{
linker_plugin_file_spec = find_a_file (&exec_prefixes,
- "liblto_plugin.so", X_OK,
+ LTOPLUGINSONAME, R_OK,
false);
if (!linker_plugin_file_spec)
- fatal ("-fuse-linker-plugin, but liblto_plugin.so not found");
-
- lto_libgcc_spec = find_a_file (&startfile_prefixes, "libgcc.a",
- R_OK, true);
- if (!lto_libgcc_spec)
- fatal ("could not find libgcc.a");
+ fatal_error ("-fuse-linker-plugin, but " LTOPLUGINSONAME " not found");
}
+#endif
lto_gcc_spec = argv[0];
/* Rebuild the COMPILER_PATH and LIBRARY_PATH environment variables
}
value = do_spec (link_command_spec);
if (value < 0)
- error_count = 1;
+ errorcount = 1;
linker_was_run = (tmp != execution_count);
}
/* If options said don't run linker,
complain about input files to be given to the linker. */
- if (! linker_was_run && error_count == 0)
+ if (! linker_was_run && !seen_error ())
for (i = 0; (int) i < n_infiles; i++)
if (explicit_link_files[i]
&& !(infiles[i].language && infiles[i].language[0] == '*'))
- error ("%s: linker input file unused because linking not done",
- outfiles[i]);
+ warning (0, "%s: linker input file unused because linking not done",
+ outfiles[i]);
/* Delete some or all of the temporary files we made. */
- if (error_count)
+ if (seen_error ())
delete_failure_queue ();
delete_temp_files ();
printf ("%s\n", bug_report_url);
}
+ out:
return (signal_count != 0 ? 2
- : error_count > 0 ? (pass_exit_codes ? greatest_status : 1)
+ : seen_error () ? (pass_exit_codes ? greatest_status : 1)
: 0);
}
static void
perror_with_name (const char *name)
{
- error ("%s: %s", name, xstrerror (errno));
-}
-
-/* Output an error message and exit. */
-
-void
-fancy_abort (const char *file, int line, const char *func)
-{
- fatal_ice ("internal gcc abort in %s, at %s:%d", func, file, line);
-}
-\f
-/* Output an error message and exit. */
-
-void
-fatal_ice (const char *cmsgid, ...)
-{
- va_list ap;
-
- va_start (ap, cmsgid);
-
- fprintf (stderr, "%s: ", programname);
- vfprintf (stderr, _(cmsgid), ap);
- va_end (ap);
- fprintf (stderr, "\n");
- delete_temp_files ();
- exit (pass_exit_codes ? ICE_EXIT_CODE : 1);
-}
-
-void
-fatal (const char *cmsgid, ...)
-{
- va_list ap;
-
- va_start (ap, cmsgid);
-
- fprintf (stderr, "%s: ", programname);
- vfprintf (stderr, _(cmsgid), ap);
- va_end (ap);
- fprintf (stderr, "\n");
- delete_temp_files ();
- exit (1);
-}
-
-/* The argument is actually c-format, not gcc-internal-format,
- but because functions with identical names are used through
- the rest of the compiler with gcc-internal-format, we just
- need to hope all users of these functions use the common
- subset between c-format and gcc-internal-format. */
-
-void
-error (const char *gmsgid, ...)
-{
- va_list ap;
-
- va_start (ap, gmsgid);
- fprintf (stderr, "%s: ", programname);
- vfprintf (stderr, _(gmsgid), ap);
- va_end (ap);
-
- fprintf (stderr, "\n");
-}
-
-static void
-notice (const char *cmsgid, ...)
-{
- va_list ap;
-
- va_start (ap, cmsgid);
- vfprintf (stderr, _(cmsgid), ap);
- va_end (ap);
+ error ("%s: %m", name);
}
\f
static inline void
if (*q == '\0')
{
invalid_matches:
- fatal ("multilib spec '%s' is invalid", multilib_matches);
+ fatal_error ("multilib spec %qs is invalid",
+ multilib_matches);
}
q++;
}
if (*p == '\0')
{
invalid_exclusions:
- fatal ("multilib exclusions '%s' is invalid",
- multilib_exclusions);
+ fatal_error ("multilib exclusions %qs is invalid",
+ multilib_exclusions);
}
if (! ok)
if (*p == '\0')
{
invalid_select:
- fatal ("multilib select '%s' is invalid",
- multilib_select);
+ fatal_error ("multilib select %qs is invalid",
+ multilib_select);
}
++p;
}
if (*p == '\0')
{
invalid_select:
- fatal ("multilib select '%s' is invalid", multilib_select);
+ fatal_error ("multilib select %qs is invalid", multilib_select);
}
++p;
if (*e == '\0')
{
invalid_exclusion:
- fatal ("multilib exclusion '%s' is invalid",
- multilib_exclusions);
+ fatal_error ("multilib exclusion %qs is invalid",
+ multilib_exclusions);
}
if (! m)
/* If this is a duplicate, skip it. */
skip = (last_path != 0
&& (unsigned int) (p - this_path) == last_path_len
- && ! strncmp (last_path, this_path, last_path_len));
+ && ! filename_ncmp (last_path, this_path, last_path_len));
last_path = this_path;
last_path_len = p - this_path;
value = getenv (argv[0]);
if (!value)
- fatal ("environment variable \"%s\" not defined", argv[0]);
+ fatal_error ("environment variable %qs not defined", argv[0]);
/* We have to escape every character of the environment variable so
they are not interpreted as active spec characters. A
for (i = 0; i < n_infiles; i++)
{
- if (outfiles[i] && !strcmp (outfiles[i], argv[0]))
+ if (outfiles[i] && !filename_cmp (outfiles[i], argv[0]))
outfiles[i] = xstrdup (argv[1]);
}
return NULL;
}
+/* remove-outfile built-in spec function.
+ *
+ * This looks for the first argument in the outfiles array's name and
+ * removes it. */
+
+static const char *
+remove_outfile_spec_function (int argc, const char **argv)
+{
+ int i;
+ /* Must have exactly one argument. */
+ if (argc != 1)
+ abort ();
+
+ for (i = 0; i < n_infiles; i++)
+ {
+ if (outfiles[i] && !filename_cmp (outfiles[i], argv[0]))
+ outfiles[i] = NULL;
+ }
+ return NULL;
+}
+
/* Given two version numbers, compares the two numbers.
A version number must match the regular expression
([1-9][0-9]*|0)(\.([1-9][0-9]*|0))*
abort ();
rresult = regexec (&r, v1, 0, NULL, 0);
if (rresult == REG_NOMATCH)
- fatal ("invalid version number `%s'", v1);
+ fatal_error ("invalid version number %qs", v1);
else if (rresult != 0)
abort ();
rresult = regexec (&r, v2, 0, NULL, 0);
if (rresult == REG_NOMATCH)
- fatal ("invalid version number `%s'", v2);
+ fatal_error ("invalid version number %qs", v2);
else if (rresult != 0)
abort ();
bool result;
if (argc < 3)
- fatal ("too few arguments to %%:version-compare");
+ fatal_error ("too few arguments to %%:version-compare");
if (argv[0][0] == '\0')
abort ();
if ((argv[0][1] == '<' || argv[0][1] == '>') && argv[0][0] != '!')
nargs = 2;
if (argc != nargs + 3)
- fatal ("too many arguments to %%:version-compare");
+ fatal_error ("too many arguments to %%:version-compare");
switch_len = strlen (argv[nargs + 1]);
for (i = 0; i < n_switches; i++)
break;
default:
- fatal ("unknown operator '%s' in %%:version-compare", argv[0]);
+ fatal_error ("unknown operator %qs in %%:version-compare", argv[0]);
}
if (! result)
return NULL;
return NULL;
}
+/* %:find-file spec function. This function replaces its argument by
+ the file found thru find_file, that is the -print-file-name gcc
+ program option. */
+static const char *
+find_file_spec_function (int argc, const char **argv)
+{
+ const char *file;
+
+ if (argc != 1)
+ abort ();
+
+ file = find_file (argv[0]);
+ return file;
+}
+
+
+/* %:find-plugindir spec function. This function replaces its argument
+ by the -iplugindir=<dir> option. `dir' is found thru find_file, that
+ is the -print-file-name gcc program option. */
+static const char *
+find_plugindir_spec_function (int argc, const char **argv ATTRIBUTE_UNUSED)
+{
+ const char *option;
+
+ if (argc != 0)
+ abort ();
+
+ option = concat ("-iplugindir=", find_file ("plugin"), NULL);
+ return option;
+}
+
+
/* %:print-asm-header spec function. Print a banner to say that the
following output is from the assembler. */
static char random_seed[HOST_BITS_PER_WIDE_INT / 4 + 3];
if (arg != 0)
- fatal ("too many arguments to %%:compare-debug-dump-opt");
+ fatal_error ("too many arguments to %%:compare-debug-dump-opt");
do_spec_2 ("%{fdump-final-insns=*:%*}");
do_spec_1 (" ", 0, NULL);
- if (argbuf_index > 0 && strcmp (argv[argbuf_index - 1], "."))
+ if (VEC_length (const_char_p, argbuf) > 0
+ && strcmp (argv[VEC_length (const_char_p, argbuf) - 1], "."))
{
if (!compare_debug)
return NULL;
- name = xstrdup (argv[argbuf_index - 1]);
+ name = xstrdup (argv[VEC_length (const_char_p, argbuf) - 1]);
ret = NULL;
}
else
{
const char *ext = NULL;
- if (argbuf_index > 0)
+ if (VEC_length (const_char_p, argbuf) > 0)
{
do_spec_2 ("%{o*:%*}%{!o:%{!S:%b%O}%{S:%b.s}}");
ext = ".gkd";
do_spec_1 (" ", 0, NULL);
- gcc_assert (argbuf_index > 0);
+ gcc_assert (VEC_length (const_char_p, argbuf) > 0);
- name = concat (argbuf[argbuf_index - 1], ext, NULL);
+ name = concat (VEC_last (const_char_p, argbuf), ext, NULL);
ret = concat ("-fdump-final-insns=", name, NULL);
}
const char **argv ATTRIBUTE_UNUSED)
{
if (arg != 0)
- fatal ("too many arguments to %%:compare-debug-self-opt");
+ fatal_error ("too many arguments to %%:compare-debug-self-opt");
if (compare_debug >= 0)
return NULL;
do_spec_2 ("%{c|S:%{o*:%*}}");
do_spec_1 (" ", 0, NULL);
- if (argbuf_index > 0)
+ if (VEC_length (const_char_p, argbuf) > 0)
debug_auxbase_opt = concat ("-auxbase-strip ",
- argbuf[argbuf_index - 1],
+ VEC_last (const_char_p, argbuf),
NULL);
else
debug_auxbase_opt = NULL;
int len;
if (arg == 0)
- fatal ("too few arguments to %%:compare-debug-auxbase-opt");
+ fatal_error ("too few arguments to %%:compare-debug-auxbase-opt");
if (arg != 1)
- fatal ("too many arguments to %%:compare-debug-auxbase-opt");
+ fatal_error ("too many arguments to %%:compare-debug-auxbase-opt");
if (compare_debug >= 0)
return NULL;
len = strlen (argv[0]);
if (len < 3 || strcmp (argv[0] + len - 3, ".gk") != 0)
- fatal ("argument to %%:compare-debug-auxbase-opt does not end in .gk");
+ fatal_error ("argument to %%:compare-debug-auxbase-opt "
+ "does not end in .gk");
if (debug_auxbase_opt)
return debug_auxbase_opt;
return name;
}
+
+/* %:pass-through-libs spec function. Finds all -l options and input
+ file names in the lib spec passed to it, and makes a list of them
+ prepended with the plugin option to cause them to be passed through
+ to the final link after all the new object files have been added. */
+
+const char *
+pass_through_libs_spec_func (int argc, const char **argv)
+{
+ char *prepended = xstrdup (" ");
+ int n;
+ /* Shlemiel the painter's algorithm. Innately horrible, but at least
+ we know that there will never be more than a handful of strings to
+ concat, and it's only once per run, so it's not worth optimising. */
+ for (n = 0; n < argc; n++)
+ {
+ char *old = prepended;
+ /* Anything that isn't an option is a full path to an output
+ file; pass it through if it ends in '.a'. Among options,
+ pass only -l. */
+ if (argv[n][0] == '-' && argv[n][1] == 'l')
+ {
+ const char *lopt = argv[n] + 2;
+ /* Handle both joined and non-joined -l options. If for any
+ reason there's a trailing -l with no joined or following
+ arg just discard it. */
+ if (!*lopt && ++n >= argc)
+ break;
+ else if (!*lopt)
+ lopt = argv[n];
+ prepended = concat (prepended, "-plugin-opt=-pass-through=-l",
+ lopt, " ", NULL);
+ }
+ else if (!strcmp (".a", argv[n] + strlen (argv[n]) - 2))
+ {
+ prepended = concat (prepended, "-plugin-opt=-pass-through=",
+ argv[n], " ", NULL);
+ }
+ if (prepended != old)
+ free (old);
+ }
+ return prepended;
+}