/* Instruction scheduling pass.
- Copyright (C) 1992-2019 Free Software Foundation, Inc.
+ Copyright (C) 1992-2020 Free Software Foundation, Inc.
Contributed by Michael Tiemann (tiemann@cygnus.com) Enhanced by,
and currently maintained by, Jim Wilson (wilson@cygnus.com)
#include "cfgbuild.h"
#include "sched-int.h"
#include "common/common-target.h"
-#include "params.h"
#include "dbgcnt.h"
#include "cfgloop.h"
#include "dumpfile.h"
/* Test if it is a 'store'. */
tmp_class = may_trap_exp (XEXP (x, 0), 1);
break;
- case CLOBBER_HIGH:
- gcc_assert (REG_P (XEXP (x, 0)));
- break;
case SET:
/* Test if it is a store. */
tmp_class = may_trap_exp (SET_DEST (x), 1);
modulo_max_stages = max_stages;
modulo_n_insns = insns;
modulo_iter0_max_uid = max_uid;
- modulo_backtracks_left = PARAM_VALUE (PARAM_MAX_MODULO_BACKTRACK_ATTEMPTS);
+ modulo_backtracks_left = param_max_modulo_backtrack_attempts;
}
/* A structure to record a pair of insns where the first one is a real
if (flag_sched_critical_path_heuristic && priority_val)
return rfs_result (RFS_PRIORITY, priority_val, tmp, tmp2);
- if (PARAM_VALUE (PARAM_SCHED_AUTOPREF_QUEUE_DEPTH) >= 0)
+ if (param_sched_autopref_queue_depth >= 0)
{
int autopref = autopref_rank_for_schedule (tmp, tmp2);
if (autopref != 0)
}
/* Add INSN to the model worklist. Start looking for a suitable position
- between neighbors PREV and NEXT, testing at most MAX_SCHED_READY_INSNS
+ between neighbors PREV and NEXT, testing at most param_max_sched_ready_insns
insns either side. A null PREV indicates the beginning of the list and
a null NEXT indicates the end. */
{
int count;
- count = MAX_SCHED_READY_INSNS;
+ count = param_max_sched_ready_insns;
if (count > 0 && prev && model_order_p (insn, prev))
do
{
int count;
prev = insn->prev;
- count = MAX_SCHED_READY_INSNS;
+ count = param_max_sched_ready_insns;
while (count > 0 && prev && model_order_p (insn, prev))
{
count--;
{
fprintf (sched_dump, ";;\t+--- worklist:\n");
insn = model_worklist;
- count = MAX_SCHED_READY_INSNS;
+ count = param_max_sched_ready_insns;
while (count > 0 && insn)
{
fprintf (sched_dump, ";;\t+--- %d [%d, %d, %d, %d]\n",
Failing that, just pick the highest-priority instruction in the
worklist. */
- count = MAX_SCHED_READY_INSNS;
+ count = param_max_sched_ready_insns;
insn = model_worklist;
fallback = 0;
for (;;)
if (insn != tail)
{
remove_insn (insn);
+ /* If an insn was split just before the EPILOGUE_BEG note and
+ that split created new basic blocks, we could have a
+ BASIC_BLOCK note here. Safely advance over it in that case
+ and assert that we land on a real insn. */
+ if (NOTE_P (next)
+ && NOTE_KIND (next) == NOTE_INSN_BASIC_BLOCK
+ && next != next_tail)
+ next = NEXT_INSN (next);
+ gcc_assert (INSN_P (next));
add_reg_note (next, REG_SAVE_NOTE,
GEN_INT (NOTE_INSN_EPILOGUE_BEG));
break;
/* If the ready list is full, delay the insn for 1 cycle.
See the comment in schedule_block for the rationale. */
if (!reload_completed
- && (ready->n_ready - ready->n_debug > MAX_SCHED_READY_INSNS
+ && (ready->n_ready - ready->n_debug > param_max_sched_ready_insns
|| (sched_pressure == SCHED_PRESSURE_MODEL
- /* Limit pressure recalculations to MAX_SCHED_READY_INSNS
- instructions too. */
+ /* Limit pressure recalculations to
+ param_max_sched_ready_insns instructions too. */
&& model_index (insn) > (model_curr_point
- + MAX_SCHED_READY_INSNS)))
+ + param_max_sched_ready_insns)))
&& !(sched_pressure == SCHED_PRESSURE_MODEL
&& model_curr_point < model_num_insns
/* Always allow the next model instruction to issue. */
last = emit_note_before (note_type, last);
remove_note (insn, note);
+ df_insn_create_insn_record (last);
}
}
}
/* Exit early if the param forbids this or if we're not entering here through
normal haifa scheduling. This can happen if selective scheduling is
explicitly enabled. */
- if (!insn_queue || PARAM_VALUE (PARAM_SCHED_AUTOPREF_QUEUE_DEPTH) <= 0)
+ if (!insn_queue || param_sched_autopref_queue_depth <= 0)
return 0;
if (sched_verbose >= 2 && ready_index == 0)
}
}
- if (PARAM_VALUE (PARAM_SCHED_AUTOPREF_QUEUE_DEPTH) == 1)
+ if (param_sched_autopref_queue_depth == 1)
continue;
/* Everything from the current queue slot should have been moved to
the ready list. */
gcc_assert (insn_queue[NEXT_Q_AFTER (q_ptr, 0)] == NULL_RTX);
- int n_stalls = PARAM_VALUE (PARAM_SCHED_AUTOPREF_QUEUE_DEPTH) - 1;
+ int n_stalls = param_sched_autopref_queue_depth - 1;
if (n_stalls > max_insn_queue_index)
n_stalls = max_insn_queue_index;
time in the worst case. Before reload we are more likely to have
big lists so truncate them to a reasonable size. */
if (!reload_completed
- && ready.n_ready - ready.n_debug > MAX_SCHED_READY_INSNS)
+ && ready.n_ready - ready.n_debug > param_max_sched_ready_insns)
{
ready_sort_debug (&ready);
ready_sort_real (&ready);
- /* Find first free-standing insn past MAX_SCHED_READY_INSNS.
+ /* Find first free-standing insn past param_max_sched_ready_insns.
If there are debug insns, we know they're first. */
- for (i = MAX_SCHED_READY_INSNS + ready.n_debug; i < ready.n_ready; i++)
+ for (i = param_max_sched_ready_insns + ready.n_debug; i < ready.n_ready;
+ i++)
if (!SCHED_GROUP_P (ready_element (&ready, i)))
break;
&& !reload_completed
&& common_sched_info->sched_pass_id == SCHED_RGN_PASS)
sched_pressure = ((enum sched_pressure_algorithm)
- PARAM_VALUE (PARAM_SCHED_PRESSURE_ALGORITHM));
+ param_sched_pressure_algorithm);
else
sched_pressure = SCHED_PRESSURE_NONE;
if (spec_info->mask != 0)
{
- spec_info->data_weakness_cutoff =
- (PARAM_VALUE (PARAM_SCHED_SPEC_PROB_CUTOFF) * MAX_DEP_WEAK) / 100;
- spec_info->control_weakness_cutoff =
- (PARAM_VALUE (PARAM_SCHED_SPEC_PROB_CUTOFF)
- * REG_BR_PROB_BASE) / 100;
+ spec_info->data_weakness_cutoff
+ = (param_sched_spec_prob_cutoff * MAX_DEP_WEAK) / 100;
+ spec_info->control_weakness_cutoff
+ = (param_sched_spec_prob_cutoff * REG_BR_PROB_BASE) / 100;
}
else
/* So we won't read anything accidentally. */
{
int new_luids_max_uid = get_max_uid () + 1;
- sched_luids.safe_grow_cleared (new_luids_max_uid);
+ sched_luids.safe_grow_cleared (new_luids_max_uid, true);
}
/* Initialize LUID for INSN. */
if (reserve > 0
&& ! h_i_d.space (reserve))
{
- h_i_d.safe_grow_cleared (3 * get_max_uid () / 2);
+ h_i_d.safe_grow_cleared (3 * get_max_uid () / 2, true);
sched_extend_target ();
}
}
projects / gcc.git / blobdiff