/* Allocate registers within a basic block, for GNU compiler.
- Copyright (C) 1987, 88, 91, 93-98, 1999 Free Software Foundation, Inc.
+ Copyright (C) 1987, 1988, 1991, 1993, 1994, 1995, 1996, 1997, 1998,
+ 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
-This file is part of GNU CC.
+This file is part of GCC.
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
+GCC is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free
+Software Foundation; either version 2, or (at your option) any later
+version.
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or
+FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+for more details.
You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING. If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA. */
-
+along with GCC; see the file COPYING. If not, write to the Free
+Software Foundation, 59 Temple Place - Suite 330, Boston, MA
+02111-1307, USA. */
/* Allocation of hard register numbers to pseudo registers is done in
two passes. In this pass we consider only regs that are born and
Tying is represented with "quantity numbers".
A non-tied register is given a new quantity number.
Tied registers have the same quantity number.
-
+
We have provision to exempt registers, even when they are contained
within the block, that can be tied to others that are not contained in it.
This is so that global_alloc could process them both and tie them then.
#include "config.h"
#include "system.h"
+#include "coretypes.h"
+#include "tm.h"
+#include "hard-reg-set.h"
#include "rtl.h"
+#include "tm_p.h"
#include "flags.h"
#include "basic-block.h"
#include "regs.h"
#include "function.h"
-#include "hard-reg-set.h"
#include "insn-config.h"
#include "insn-attr.h"
#include "recog.h"
#include "output.h"
#include "toplev.h"
+#include "except.h"
+#include "integrate.h"
\f
/* Next quantity number available for allocation. */
static int next_qty;
-/* In all the following vectors indexed by quantity number. */
+/* Information we maintain about each quantity. */
+struct qty
+{
+ /* The number of refs to quantity Q. */
-/* Element Q is the hard reg number chosen for quantity Q,
- or -1 if none was found. */
+ int n_refs;
-static short *qty_phys_reg;
+ /* The frequency of uses of quantity Q. */
-/* We maintain two hard register sets that indicate suggested hard registers
- for each quantity. The first, qty_phys_copy_sugg, contains hard registers
- that are tied to the quantity by a simple copy. The second contains all
- hard registers that are tied to the quantity via an arithmetic operation.
+ int freq;
- The former register set is given priority for allocation. This tends to
- eliminate copy insns. */
+ /* Insn number (counting from head of basic block)
+ where quantity Q was born. -1 if birth has not been recorded. */
-/* Element Q is a set of hard registers that are suggested for quantity Q by
- copy insns. */
+ int birth;
-static HARD_REG_SET *qty_phys_copy_sugg;
+ /* Insn number (counting from head of basic block)
+ where given quantity died. Due to the way tying is done,
+ and the fact that we consider in this pass only regs that die but once,
+ a quantity can die only once. Each quantity's life span
+ is a set of consecutive insns. -1 if death has not been recorded. */
-/* Element Q is a set of hard registers that are suggested for quantity Q by
- arithmetic insns. */
+ int death;
-static HARD_REG_SET *qty_phys_sugg;
+ /* Number of words needed to hold the data in given quantity.
+ This depends on its machine mode. It is used for these purposes:
+ 1. It is used in computing the relative importance of qtys,
+ which determines the order in which we look for regs for them.
+ 2. It is used in rules that prevent tying several registers of
+ different sizes in a way that is geometrically impossible
+ (see combine_regs). */
-/* Element Q is the number of suggested registers in qty_phys_copy_sugg. */
+ int size;
-static short *qty_phys_num_copy_sugg;
+ /* Number of times a reg tied to given qty lives across a CALL_INSN. */
-/* Element Q is the number of suggested registers in qty_phys_sugg. */
+ int n_calls_crossed;
-static short *qty_phys_num_sugg;
+ /* The register number of one pseudo register whose reg_qty value is Q.
+ This register should be the head of the chain
+ maintained in reg_next_in_qty. */
+
+ int first_reg;
-/* Element Q is the number of refs to quantity Q. */
+ /* Reg class contained in (smaller than) the preferred classes of all
+ the pseudo regs that are tied in given quantity.
+ This is the preferred class for allocating that quantity. */
-static int *qty_n_refs;
+ enum reg_class min_class;
-/* Element Q is a reg class contained in (smaller than) the
- preferred classes of all the pseudo regs that are tied in quantity Q.
- This is the preferred class for allocating that quantity. */
+ /* Register class within which we allocate given qty if we can't get
+ its preferred class. */
-static enum reg_class *qty_min_class;
+ enum reg_class alternate_class;
-/* Insn number (counting from head of basic block)
- where quantity Q was born. -1 if birth has not been recorded. */
+ /* This holds the mode of the registers that are tied to given qty,
+ or VOIDmode if registers with differing modes are tied together. */
-static int *qty_birth;
+ enum machine_mode mode;
-/* Insn number (counting from head of basic block)
- where quantity Q died. Due to the way tying is done,
- and the fact that we consider in this pass only regs that die but once,
- a quantity can die only once. Each quantity's life span
- is a set of consecutive insns. -1 if death has not been recorded. */
+ /* the hard reg number chosen for given quantity,
+ or -1 if none was found. */
-static int *qty_death;
+ short phys_reg;
+};
-/* Number of words needed to hold the data in quantity Q.
- This depends on its machine mode. It is used for these purposes:
- 1. It is used in computing the relative importances of qtys,
- which determines the order in which we look for regs for them.
- 2. It is used in rules that prevent tying several registers of
- different sizes in a way that is geometrically impossible
- (see combine_regs). */
+static struct qty *qty;
-static int *qty_size;
+/* These fields are kept separately to speedup their clearing. */
-/* This holds the mode of the registers that are tied to qty Q,
- or VOIDmode if registers with differing modes are tied together. */
+/* We maintain two hard register sets that indicate suggested hard registers
+ for each quantity. The first, phys_copy_sugg, contains hard registers
+ that are tied to the quantity by a simple copy. The second contains all
+ hard registers that are tied to the quantity via an arithmetic operation.
-static enum machine_mode *qty_mode;
+ The former register set is given priority for allocation. This tends to
+ eliminate copy insns. */
-/* Number of times a reg tied to qty Q lives across a CALL_INSN. */
+/* Element Q is a set of hard registers that are suggested for quantity Q by
+ copy insns. */
-static int *qty_n_calls_crossed;
+static HARD_REG_SET *qty_phys_copy_sugg;
-/* Register class within which we allocate qty Q if we can't get
- its preferred class. */
+/* Element Q is a set of hard registers that are suggested for quantity Q by
+ arithmetic insns. */
-static enum reg_class *qty_alternate_class;
+static HARD_REG_SET *qty_phys_sugg;
-/* Element Q is nonzero if this quantity has been used in a SUBREG
- that changes its size. */
+/* Element Q is the number of suggested registers in qty_phys_copy_sugg. */
-static char *qty_changes_size;
+static short *qty_phys_num_copy_sugg;
-/* Element Q is the register number of one pseudo register whose
- reg_qty value is Q. This register should be the head of the chain
- maintained in reg_next_in_qty. */
+/* Element Q is the number of suggested registers in qty_phys_sugg. */
-static int *qty_first_reg;
+static short *qty_phys_num_sugg;
/* If (REG N) has been assigned a quantity number, is a register number
of another register assigned the same quantity number, or -1 for the
- end of the chain. qty_first_reg point to the head of this chain. */
+ end of the chain. qty->first_reg point to the head of this chain. */
static int *reg_next_in_qty;
static int this_insn_number;
static rtx this_insn;
-/* Used to communicate changes made by update_equiv_regs to
- memref_referenced_p. reg_equiv_replacement is set for any REG_EQUIV note
- found or created, so that we can keep track of what memory accesses might
- be created later, e.g. by reload. */
+struct equivalence
+{
+ /* Set when an attempt should be made to replace a register
+ with the associated src_p entry. */
+
+ char replace;
+
+ /* Set when a REG_EQUIV note is found or created. Use to
+ keep track of what memory accesses might be created later,
+ e.g. by reload. */
+
+ rtx replacement;
+
+ rtx *src_p;
+
+ /* Loop depth is used to recognize equivalences which appear
+ to be present within the same loop (or in an inner loop). */
-static rtx *reg_equiv_replacement;
+ int loop_depth;
-/* Used for communication between update_equiv_regs and no_equiv. */
-static rtx *reg_equiv_init_insns;
+ /* The list of each instruction which initializes this register. */
+
+ rtx init_insns;
+};
+
+/* reg_equiv[N] (where N is a pseudo reg number) is the equivalence
+ structure for that register. */
+
+static struct equivalence *reg_equiv;
/* Nonzero if we recorded an equivalence for a LABEL_REF. */
static int recorded_label_ref;
-static void alloc_qty PROTO((int, enum machine_mode, int, int));
-static void validate_equiv_mem_from_store PROTO((rtx, rtx));
-static int validate_equiv_mem PROTO((rtx, rtx, rtx));
-static int contains_replace_regs PROTO((rtx, char *));
-static int memref_referenced_p PROTO((rtx, rtx));
-static int memref_used_between_p PROTO((rtx, rtx, rtx));
-static void update_equiv_regs PROTO((void));
-static void no_equiv PROTO((rtx, rtx));
-static void block_alloc PROTO((int));
-static int qty_sugg_compare PROTO((int, int));
-static int qty_sugg_compare_1 PROTO((const GENERIC_PTR, const GENERIC_PTR));
-static int qty_compare PROTO((int, int));
-static int qty_compare_1 PROTO((const GENERIC_PTR, const GENERIC_PTR));
-static int combine_regs PROTO((rtx, rtx, int, int, rtx, int));
-static int reg_meets_class_p PROTO((int, enum reg_class));
-static void update_qty_class PROTO((int, int));
-static void reg_is_set PROTO((rtx, rtx));
-static void reg_is_born PROTO((rtx, int));
-static void wipe_dead_reg PROTO((rtx, int));
-static int find_free_reg PROTO((enum reg_class, enum machine_mode,
- int, int, int, int, int));
-static void mark_life PROTO((int, enum machine_mode, int));
-static void post_mark_life PROTO((int, enum machine_mode, int, int, int));
-static int no_conflict_p PROTO((rtx, rtx, rtx));
-static int requires_inout PROTO((const char *));
+static void alloc_qty (int, enum machine_mode, int, int);
+static void validate_equiv_mem_from_store (rtx, rtx, void *);
+static int validate_equiv_mem (rtx, rtx, rtx);
+static int equiv_init_varies_p (rtx);
+static int equiv_init_movable_p (rtx, int);
+static int contains_replace_regs (rtx);
+static int memref_referenced_p (rtx, rtx);
+static int memref_used_between_p (rtx, rtx, rtx);
+static void update_equiv_regs (void);
+static void no_equiv (rtx, rtx, void *);
+static void block_alloc (int);
+static int qty_sugg_compare (int, int);
+static int qty_sugg_compare_1 (const void *, const void *);
+static int qty_compare (int, int);
+static int qty_compare_1 (const void *, const void *);
+static int combine_regs (rtx, rtx, int, int, rtx, int);
+static int reg_meets_class_p (int, enum reg_class);
+static void update_qty_class (int, int);
+static void reg_is_set (rtx, rtx, void *);
+static void reg_is_born (rtx, int);
+static void wipe_dead_reg (rtx, int);
+static int find_free_reg (enum reg_class, enum machine_mode, int, int, int,
+ int, int);
+static void mark_life (int, enum machine_mode, int);
+static void post_mark_life (int, enum machine_mode, int, int, int);
+static int no_conflict_p (rtx, rtx, rtx);
+static int requires_inout (const char *);
\f
/* Allocate a new quantity (new within current basic block)
for register number REGNO which is born at index BIRTH
within the block. MODE and SIZE are info on reg REGNO. */
static void
-alloc_qty (regno, mode, size, birth)
- int regno;
- enum machine_mode mode;
- int size, birth;
+alloc_qty (int regno, enum machine_mode mode, int size, int birth)
{
- register int qty = next_qty++;
+ int qtyno = next_qty++;
- reg_qty[regno] = qty;
+ reg_qty[regno] = qtyno;
reg_offset[regno] = 0;
reg_next_in_qty[regno] = -1;
- qty_first_reg[qty] = regno;
- qty_size[qty] = size;
- qty_mode[qty] = mode;
- qty_birth[qty] = birth;
- qty_n_calls_crossed[qty] = REG_N_CALLS_CROSSED (regno);
- qty_min_class[qty] = reg_preferred_class (regno);
- qty_alternate_class[qty] = reg_alternate_class (regno);
- qty_n_refs[qty] = REG_N_REFS (regno);
- qty_changes_size[qty] = REG_CHANGES_SIZE (regno);
+ qty[qtyno].first_reg = regno;
+ qty[qtyno].size = size;
+ qty[qtyno].mode = mode;
+ qty[qtyno].birth = birth;
+ qty[qtyno].n_calls_crossed = REG_N_CALLS_CROSSED (regno);
+ qty[qtyno].min_class = reg_preferred_class (regno);
+ qty[qtyno].alternate_class = reg_alternate_class (regno);
+ qty[qtyno].n_refs = REG_N_REFS (regno);
+ qty[qtyno].freq = REG_FREQ (regno);
}
\f
/* Main entry point of this file. */
int
-local_alloc ()
+local_alloc (void)
{
- register int b, i;
+ int i;
int max_qty;
+ basic_block b;
/* We need to keep track of whether or not we recorded a LABEL_REF so
that we know if the jump optimizer needs to be rerun. */
/* Promote REG_EQUAL notes to REG_EQUIV notes and adjust status of affected
registers. */
- update_equiv_regs ();
+ if (optimize)
+ update_equiv_regs ();
/* This sets the maximum number of quantities we can have. Quantity
numbers start at zero and we can have one for each pseudo. */
See the declarations of these variables, above,
for what they mean. */
- qty_phys_reg = (short *) alloca (max_qty * sizeof (short));
- qty_phys_copy_sugg
- = (HARD_REG_SET *) alloca (max_qty * sizeof (HARD_REG_SET));
- qty_phys_num_copy_sugg = (short *) alloca (max_qty * sizeof (short));
- qty_phys_sugg = (HARD_REG_SET *) alloca (max_qty * sizeof (HARD_REG_SET));
- qty_phys_num_sugg = (short *) alloca (max_qty * sizeof (short));
- qty_birth = (int *) alloca (max_qty * sizeof (int));
- qty_death = (int *) alloca (max_qty * sizeof (int));
- qty_first_reg = (int *) alloca (max_qty * sizeof (int));
- qty_size = (int *) alloca (max_qty * sizeof (int));
- qty_mode
- = (enum machine_mode *) alloca (max_qty * sizeof (enum machine_mode));
- qty_n_calls_crossed = (int *) alloca (max_qty * sizeof (int));
- qty_min_class
- = (enum reg_class *) alloca (max_qty * sizeof (enum reg_class));
- qty_alternate_class
- = (enum reg_class *) alloca (max_qty * sizeof (enum reg_class));
- qty_n_refs = (int *) alloca (max_qty * sizeof (int));
- qty_changes_size = (char *) alloca (max_qty * sizeof (char));
-
- reg_qty = (int *) xmalloc (max_regno * sizeof (int));
- reg_offset = (char *) xmalloc (max_regno * sizeof (char));
- reg_next_in_qty = (int *) xmalloc(max_regno * sizeof (int));
-
- /* Allocate the reg_renumber array */
- allocate_reg_info (max_regno, FALSE, TRUE);
+ qty = xmalloc (max_qty * sizeof (struct qty));
+ qty_phys_copy_sugg = xmalloc (max_qty * sizeof (HARD_REG_SET));
+ qty_phys_num_copy_sugg = xmalloc (max_qty * sizeof (short));
+ qty_phys_sugg = xmalloc (max_qty * sizeof (HARD_REG_SET));
+ qty_phys_num_sugg = xmalloc (max_qty * sizeof (short));
+
+ reg_qty = xmalloc (max_regno * sizeof (int));
+ reg_offset = xmalloc (max_regno * sizeof (char));
+ reg_next_in_qty = xmalloc (max_regno * sizeof (int));
/* Determine which pseudo-registers can be allocated by local-alloc.
In general, these are the registers used only in a single block and
- which only die once. However, if a register's preferred class has only
- a few entries, don't allocate this register here unless it is preferred
- or nothing since retry_global_alloc won't be able to move it to
- GENERAL_REGS if a reload register of this class is needed.
+ which only die once.
We need not be concerned with which block actually uses the register
since we will never see it outside that block. */
for (i = FIRST_PSEUDO_REGISTER; i < max_regno; i++)
{
- if (REG_BASIC_BLOCK (i) >= 0 && REG_N_DEATHS (i) == 1
- && (reg_alternate_class (i) == NO_REGS
- || ! CLASS_LIKELY_SPILLED_P (reg_preferred_class (i))))
+ if (REG_BASIC_BLOCK (i) >= 0 && REG_N_DEATHS (i) == 1)
reg_qty[i] = -2;
else
reg_qty[i] = -1;
/* Allocate each block's local registers, block by block. */
- for (b = 0; b < n_basic_blocks; b++)
+ FOR_EACH_BB (b)
{
/* NEXT_QTY indicates which elements of the `qty_...'
vectors might need to be initialized because they were used
else
{
#define CLEAR(vector) \
- bzero ((char *) (vector), (sizeof (*(vector))) * next_qty);
+ memset ((vector), 0, (sizeof (*(vector))) * next_qty);
CLEAR (qty_phys_copy_sugg);
CLEAR (qty_phys_num_copy_sugg);
next_qty = 0;
- block_alloc (b);
-#ifdef USE_C_ALLOCA
- alloca (0);
-#endif
+ block_alloc (b->index);
}
+ free (qty);
+ free (qty_phys_copy_sugg);
+ free (qty_phys_num_copy_sugg);
+ free (qty_phys_sugg);
+ free (qty_phys_num_sugg);
+
free (reg_qty);
free (reg_offset);
free (reg_next_in_qty);
+
return recorded_label_ref;
}
\f
-/* Depth of loops we are in while in update_equiv_regs. */
-static int loop_depth;
-
/* Used for communication between the following two functions: contains
a MEM that we wish to ensure remains unchanged. */
static rtx equiv_mem;
Called via note_stores. */
static void
-validate_equiv_mem_from_store (dest, set)
- rtx dest;
- rtx set ATTRIBUTE_UNUSED;
+validate_equiv_mem_from_store (rtx dest, rtx set ATTRIBUTE_UNUSED,
+ void *data ATTRIBUTE_UNUSED)
{
if ((GET_CODE (dest) == REG
&& reg_overlap_mentioned_p (dest, equiv_mem))
Return 1 if MEMREF remains valid. */
static int
-validate_equiv_mem (start, reg, memref)
- rtx start;
- rtx reg;
- rtx memref;
+validate_equiv_mem (rtx start, rtx reg, rtx memref)
{
rtx insn;
rtx note;
for (insn = start; insn && ! equiv_mem_modified; insn = NEXT_INSN (insn))
{
- if (GET_RTX_CLASS (GET_CODE (insn)) != 'i')
+ if (! INSN_P (insn))
continue;
if (find_reg_note (insn, REG_DEAD, reg))
return 1;
if (GET_CODE (insn) == CALL_INSN && ! RTX_UNCHANGING_P (memref)
- && ! CONST_CALL_P (insn))
+ && ! CONST_OR_PURE_CALL_P (insn))
return 0;
- note_stores (PATTERN (insn), validate_equiv_mem_from_store);
+ note_stores (PATTERN (insn), validate_equiv_mem_from_store, NULL);
/* If a register mentioned in MEMREF is modified via an
auto-increment, we lose the equivalence. Do the same if one
return 0;
}
-/* TRUE if X uses any registers for which reg_equiv_replace is true. */
+/* Returns zero if X is known to be invariant. */
+
+static int
+equiv_init_varies_p (rtx x)
+{
+ RTX_CODE code = GET_CODE (x);
+ int i;
+ const char *fmt;
+
+ switch (code)
+ {
+ case MEM:
+ return ! RTX_UNCHANGING_P (x) || equiv_init_varies_p (XEXP (x, 0));
+
+ case QUEUED:
+ return 1;
+
+ case CONST:
+ case CONST_INT:
+ case CONST_DOUBLE:
+ case CONST_VECTOR:
+ case SYMBOL_REF:
+ case LABEL_REF:
+ return 0;
+
+ case REG:
+ return reg_equiv[REGNO (x)].replace == 0 && rtx_varies_p (x, 0);
+
+ case ASM_OPERANDS:
+ if (MEM_VOLATILE_P (x))
+ return 1;
+
+ /* Fall through. */
+
+ default:
+ break;
+ }
+
+ fmt = GET_RTX_FORMAT (code);
+ for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
+ if (fmt[i] == 'e')
+ {
+ if (equiv_init_varies_p (XEXP (x, i)))
+ return 1;
+ }
+ else if (fmt[i] == 'E')
+ {
+ int j;
+ for (j = 0; j < XVECLEN (x, i); j++)
+ if (equiv_init_varies_p (XVECEXP (x, i, j)))
+ return 1;
+ }
+
+ return 0;
+}
+
+/* Returns nonzero if X (used to initialize register REGNO) is movable.
+ X is only movable if the registers it uses have equivalent initializations
+ which appear to be within the same loop (or in an inner loop) and movable
+ or if they are not candidates for local_alloc and don't vary. */
+
+static int
+equiv_init_movable_p (rtx x, int regno)
+{
+ int i, j;
+ const char *fmt;
+ enum rtx_code code = GET_CODE (x);
+
+ switch (code)
+ {
+ case SET:
+ return equiv_init_movable_p (SET_SRC (x), regno);
+
+ case CC0:
+ case CLOBBER:
+ return 0;
+
+ case PRE_INC:
+ case PRE_DEC:
+ case POST_INC:
+ case POST_DEC:
+ case PRE_MODIFY:
+ case POST_MODIFY:
+ return 0;
+
+ case REG:
+ return (reg_equiv[REGNO (x)].loop_depth >= reg_equiv[regno].loop_depth
+ && reg_equiv[REGNO (x)].replace)
+ || (REG_BASIC_BLOCK (REGNO (x)) < 0 && ! rtx_varies_p (x, 0));
+
+ case UNSPEC_VOLATILE:
+ return 0;
+
+ case ASM_OPERANDS:
+ if (MEM_VOLATILE_P (x))
+ return 0;
+
+ /* Fall through. */
+
+ default:
+ break;
+ }
+
+ fmt = GET_RTX_FORMAT (code);
+ for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
+ switch (fmt[i])
+ {
+ case 'e':
+ if (! equiv_init_movable_p (XEXP (x, i), regno))
+ return 0;
+ break;
+ case 'E':
+ for (j = XVECLEN (x, i) - 1; j >= 0; j--)
+ if (! equiv_init_movable_p (XVECEXP (x, i, j), regno))
+ return 0;
+ break;
+ }
+
+ return 1;
+}
+
+/* TRUE if X uses any registers for which reg_equiv[REGNO].replace is true. */
static int
-contains_replace_regs (x, reg_equiv_replace)
- rtx x;
- char *reg_equiv_replace;
+contains_replace_regs (rtx x)
{
int i, j;
const char *fmt;
case LABEL_REF:
case SYMBOL_REF:
case CONST_DOUBLE:
+ case CONST_VECTOR:
case PC:
case CC0:
case HIGH:
- case LO_SUM:
return 0;
case REG:
- return reg_equiv_replace[REGNO (x)];
+ return reg_equiv[REGNO (x)].replace;
default:
break;
switch (fmt[i])
{
case 'e':
- if (contains_replace_regs (XEXP (x, i), reg_equiv_replace))
+ if (contains_replace_regs (XEXP (x, i)))
return 1;
break;
case 'E':
for (j = XVECLEN (x, i) - 1; j >= 0; j--)
- if (contains_replace_regs (XVECEXP (x, i, j), reg_equiv_replace))
+ if (contains_replace_regs (XVECEXP (x, i, j)))
return 1;
break;
}
to MEMREF. */
static int
-memref_referenced_p (memref, x)
- rtx x;
- rtx memref;
+memref_referenced_p (rtx memref, rtx x)
{
int i, j;
const char *fmt;
case LABEL_REF:
case SYMBOL_REF:
case CONST_DOUBLE:
+ case CONST_VECTOR:
case PC:
case CC0:
case HIGH:
return 0;
case REG:
- return (reg_equiv_replacement[REGNO (x)]
+ return (reg_equiv[REGNO (x)].replacement
&& memref_referenced_p (memref,
- reg_equiv_replacement[REGNO (x)]));
+ reg_equiv[REGNO (x)].replacement));
case MEM:
if (true_dependence (memref, VOIDmode, x, rtx_varies_p))
return 1;
return memref_referenced_p (memref, SET_SRC (x));
-
+
default:
break;
}
that would be affected by a store to MEMREF. */
static int
-memref_used_between_p (memref, start, end)
- rtx memref;
- rtx start;
- rtx end;
+memref_used_between_p (rtx memref, rtx start, rtx end)
{
rtx insn;
for (insn = NEXT_INSN (start); insn != NEXT_INSN (end);
insn = NEXT_INSN (insn))
- if (GET_RTX_CLASS (GET_CODE (insn)) == 'i'
- && memref_referenced_p (memref, PATTERN (insn)))
+ if (INSN_P (insn) && memref_referenced_p (memref, PATTERN (insn)))
return 1;
return 0;
}
\f
/* Return nonzero if the rtx X is invariant over the current function. */
+/* ??? Actually, the places this is used in reload expect exactly what
+ is tested here, and not everything that is function invariant. In
+ particular, the frame pointer and arg pointer are special cased;
+ pic_offset_table_rtx is not, and this will cause aborts when we
+ go to spill these things to memory. */
+
int
-function_invariant_p (x)
- rtx x;
+function_invariant_p (rtx x)
{
if (CONSTANT_P (x))
return 1;
completely. */
static void
-update_equiv_regs ()
+update_equiv_regs (void)
{
- /* Set when an attempt should be made to replace a register with the
- associated reg_equiv_replacement entry at the end of this function. */
- char *reg_equiv_replace
- = (char *) alloca (max_regno * sizeof *reg_equiv_replace);
rtx insn;
- int block, depth;
-
- reg_equiv_init_insns = (rtx *) alloca (max_regno * sizeof (rtx));
- reg_equiv_replacement = (rtx *) alloca (max_regno * sizeof (rtx));
+ basic_block bb;
+ int loop_depth;
+ regset_head cleared_regs;
+ int clear_regnos = 0;
- bzero ((char *) reg_equiv_init_insns, max_regno * sizeof (rtx));
- bzero ((char *) reg_equiv_replacement, max_regno * sizeof (rtx));
- bzero ((char *) reg_equiv_replace, max_regno * sizeof *reg_equiv_replace);
+ reg_equiv = xcalloc (max_regno, sizeof *reg_equiv);
+ INIT_REG_SET (&cleared_regs);
init_alias_analysis ();
- loop_depth = 1;
-
/* Scan the insns and find which registers have equivalences. Do this
in a separate scan of the insns because (due to -fcse-follow-jumps)
a register can be set below its use. */
- for (insn = get_insns (); insn; insn = NEXT_INSN (insn))
+ FOR_EACH_BB (bb)
{
- rtx note;
- rtx set;
- rtx dest, src;
- int regno;
+ loop_depth = bb->loop_depth;
- if (GET_CODE (insn) == NOTE)
+ for (insn = BB_HEAD (bb);
+ insn != NEXT_INSN (BB_END (bb));
+ insn = NEXT_INSN (insn))
{
- if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_BEG)
- loop_depth++;
- else if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_END)
- loop_depth--;
- }
+ rtx note;
+ rtx set;
+ rtx dest, src;
+ int regno;
- if (GET_RTX_CLASS (GET_CODE (insn)) != 'i')
- continue;
+ if (! INSN_P (insn))
+ continue;
- for (note = REG_NOTES (insn); note; note = XEXP (note, 1))
- if (REG_NOTE_KIND (note) == REG_INC)
- no_equiv (XEXP (note, 0), note);
+ for (note = REG_NOTES (insn); note; note = XEXP (note, 1))
+ if (REG_NOTE_KIND (note) == REG_INC)
+ no_equiv (XEXP (note, 0), note, NULL);
- set = single_set (insn);
+ set = single_set (insn);
- /* If this insn contains more (or less) than a single SET,
- only mark all destinations as having no known equivalence. */
- if (set == 0)
- {
- note_stores (PATTERN (insn), no_equiv);
- continue;
- }
- else if (GET_CODE (PATTERN (insn)) == PARALLEL)
- {
- int i;
-
- for (i = XVECLEN (PATTERN (insn), 0) - 1; i >= 0; i--)
+ /* If this insn contains more (or less) than a single SET,
+ only mark all destinations as having no known equivalence. */
+ if (set == 0)
{
- rtx part = XVECEXP (PATTERN (insn), 0, i);
- if (part != set)
- note_stores (part, no_equiv);
+ note_stores (PATTERN (insn), no_equiv, NULL);
+ continue;
}
- }
-
- dest = SET_DEST (set);
- src = SET_SRC (set);
-
- /* If this sets a MEM to the contents of a REG that is only used
- in a single basic block, see if the register is always equivalent
- to that memory location and if moving the store from INSN to the
- insn that set REG is safe. If so, put a REG_EQUIV note on the
- initializing insn.
-
- Don't add a REG_EQUIV note if the insn already has one. The existing
- REG_EQUIV is likely more useful than the one we are adding.
-
- If one of the regs in the address is marked as reg_equiv_replace,
- then we can't add this REG_EQUIV note. The reg_equiv_replace
- optimization may move the set of this register immediately before
- insn, which puts it after reg_equiv_init_insns[regno], and hence
- the mention in the REG_EQUIV note would be to an uninitialized
- pseudo. */
- /* ????? This test isn't good enough; we might see a MEM with a use of
- a pseudo register before we see its setting insn that will cause
- reg_equiv_replace for that pseudo to be set.
- Equivalences to MEMs should be made in another pass, after the
- reg_equiv_replace information has been gathered. */
-
- if (GET_CODE (dest) == MEM && GET_CODE (src) == REG
- && (regno = REGNO (src)) >= FIRST_PSEUDO_REGISTER
- && REG_BASIC_BLOCK (regno) >= 0
- && REG_N_SETS (regno) == 1
- && reg_equiv_init_insns[regno] != 0
- && reg_equiv_init_insns[regno] != const0_rtx
- && ! find_reg_note (insn, REG_EQUIV, NULL_RTX)
- && ! contains_replace_regs (XEXP (dest, 0), reg_equiv_replace))
- {
- rtx init_insn = XEXP (reg_equiv_init_insns[regno], 0);
- if (validate_equiv_mem (init_insn, src, dest)
- && ! memref_used_between_p (dest, init_insn, insn))
- REG_NOTES (init_insn)
- = gen_rtx_EXPR_LIST (REG_EQUIV, dest, REG_NOTES (init_insn));
- }
-
- /* We only handle the case of a pseudo register being set
- once, or always to the same value. */
- /* ??? The mn10200 port breaks if we add equivalences for
- values that need an ADDRESS_REGS register and set them equivalent
- to a MEM of a pseudo. The actual problem is in the over-conservative
- handling of INPADDR_ADDRESS / INPUT_ADDRESS / INPUT triples in
- calculate_needs, but we traditionally work around this problem
- here by rejecting equivalences when the destination is in a register
- that's likely spilled. This is fragile, of course, since the
- preferred class of a pseudo depends on all instructions that set
- or use it. */
-
- if (GET_CODE (dest) != REG
- || (regno = REGNO (dest)) < FIRST_PSEUDO_REGISTER
- || reg_equiv_init_insns[regno] == const0_rtx
- || (CLASS_LIKELY_SPILLED_P (reg_preferred_class (regno))
- && GET_CODE (src) == MEM))
- {
- /* This might be seting a SUBREG of a pseudo, a pseudo that is
- also set somewhere else to a constant. */
- note_stores (set, no_equiv);
- continue;
- }
- /* Don't handle the equivalence if the source is in a register
- class that's likely to be spilled. */
- if (GET_CODE (src) == REG
- && REGNO (src) >= FIRST_PSEUDO_REGISTER
- && CLASS_LIKELY_SPILLED_P (reg_preferred_class (REGNO (src))))
- {
- no_equiv (dest, set);
- continue;
- }
-
- note = find_reg_note (insn, REG_EQUAL, NULL_RTX);
-
- if (REG_N_SETS (regno) != 1
- && (! note
- || ! function_invariant_p (XEXP (note, 0))
- || (reg_equiv_replacement[regno]
- && ! rtx_equal_p (XEXP (note, 0),
- reg_equiv_replacement[regno]))))
- {
- no_equiv (dest, set);
- continue;
- }
- /* Record this insn as initializing this register. */
- reg_equiv_init_insns[regno]
- = gen_rtx_INSN_LIST (VOIDmode, insn, reg_equiv_init_insns[regno]);
-
- /* If this register is known to be equal to a constant, record that
- it is always equivalent to the constant. */
- if (note && function_invariant_p (XEXP (note, 0)))
- PUT_MODE (note, (enum machine_mode) REG_EQUIV);
-
- /* If this insn introduces a "constant" register, decrease the priority
- of that register. Record this insn if the register is only used once
- more and the equivalence value is the same as our source.
-
- The latter condition is checked for two reasons: First, it is an
- indication that it may be more efficient to actually emit the insn
- as written (if no registers are available, reload will substitute
- the equivalence). Secondly, it avoids problems with any registers
- dying in this insn whose death notes would be missed.
-
- If we don't have a REG_EQUIV note, see if this insn is loading
- a register used only in one basic block from a MEM. If so, and the
- MEM remains unchanged for the life of the register, add a REG_EQUIV
- note. */
-
- note = find_reg_note (insn, REG_EQUIV, NULL_RTX);
-
- if (note == 0 && REG_BASIC_BLOCK (regno) >= 0
- && GET_CODE (SET_SRC (set)) == MEM
- && validate_equiv_mem (insn, dest, SET_SRC (set)))
- REG_NOTES (insn) = note = gen_rtx_EXPR_LIST (REG_EQUIV, SET_SRC (set),
- REG_NOTES (insn));
-
- if (note)
- {
- int regno = REGNO (dest);
-
- /* Record whether or not we created a REG_EQUIV note for a LABEL_REF.
- We might end up substituting the LABEL_REF for uses of the
- pseudo here or later. That kind of transformation may turn an
- indirect jump into a direct jump, in which case we must rerun the
- jump optimizer to ensure that the JUMP_LABEL fields are valid. */
- if (GET_CODE (XEXP (note, 0)) == LABEL_REF
- || (GET_CODE (XEXP (note, 0)) == CONST
- && GET_CODE (XEXP (XEXP (note, 0), 0)) == PLUS
- && (GET_CODE (XEXP (XEXP (XEXP (note, 0), 0), 0))
- == LABEL_REF)))
- recorded_label_ref = 1;
-
-
- reg_equiv_replacement[regno] = XEXP (note, 0);
-
- /* Don't mess with things live during setjmp. */
- if (REG_LIVE_LENGTH (regno) >= 0)
+ else if (GET_CODE (PATTERN (insn)) == PARALLEL)
{
- /* Note that the statement below does not affect the priority
- in local-alloc! */
- REG_LIVE_LENGTH (regno) *= 2;
-
+ int i;
- /* If the register is referenced exactly twice, meaning it is
- set once and used once, indicate that the reference may be
- replaced by the equivalence we computed above. If the
- register is only used in one basic block, this can't succeed
- or combine would have done it.
+ for (i = XVECLEN (PATTERN (insn), 0) - 1; i >= 0; i--)
+ {
+ rtx part = XVECEXP (PATTERN (insn), 0, i);
+ if (part != set)
+ note_stores (part, no_equiv, NULL);
+ }
+ }
- It would be nice to use "loop_depth * 2" in the compare
- below. Unfortunately, LOOP_DEPTH need not be constant within
- a basic block so this would be too complicated.
+ dest = SET_DEST (set);
+ src = SET_SRC (set);
+
+ /* If this sets a MEM to the contents of a REG that is only used
+ in a single basic block, see if the register is always equivalent
+ to that memory location and if moving the store from INSN to the
+ insn that set REG is safe. If so, put a REG_EQUIV note on the
+ initializing insn.
+
+ Don't add a REG_EQUIV note if the insn already has one. The existing
+ REG_EQUIV is likely more useful than the one we are adding.
+
+ If one of the regs in the address has reg_equiv[REGNO].replace set,
+ then we can't add this REG_EQUIV note. The reg_equiv[REGNO].replace
+ optimization may move the set of this register immediately before
+ insn, which puts it after reg_equiv[REGNO].init_insns, and hence
+ the mention in the REG_EQUIV note would be to an uninitialized
+ pseudo. */
+ /* ????? This test isn't good enough; we might see a MEM with a use of
+ a pseudo register before we see its setting insn that will cause
+ reg_equiv[].replace for that pseudo to be set.
+ Equivalences to MEMs should be made in another pass, after the
+ reg_equiv[].replace information has been gathered. */
+
+ if (GET_CODE (dest) == MEM && GET_CODE (src) == REG
+ && (regno = REGNO (src)) >= FIRST_PSEUDO_REGISTER
+ && REG_BASIC_BLOCK (regno) >= 0
+ && REG_N_SETS (regno) == 1
+ && reg_equiv[regno].init_insns != 0
+ && reg_equiv[regno].init_insns != const0_rtx
+ && ! find_reg_note (XEXP (reg_equiv[regno].init_insns, 0),
+ REG_EQUIV, NULL_RTX)
+ && ! contains_replace_regs (XEXP (dest, 0)))
+ {
+ rtx init_insn = XEXP (reg_equiv[regno].init_insns, 0);
+ if (validate_equiv_mem (init_insn, src, dest)
+ && ! memref_used_between_p (dest, init_insn, insn))
+ REG_NOTES (init_insn)
+ = gen_rtx_EXPR_LIST (REG_EQUIV, dest, REG_NOTES (init_insn));
+ }
- This case normally occurs when a parameter is read from
- memory and then used exactly once, not in a loop. */
+ /* We only handle the case of a pseudo register being set
+ once, or always to the same value. */
+ /* ??? The mn10200 port breaks if we add equivalences for
+ values that need an ADDRESS_REGS register and set them equivalent
+ to a MEM of a pseudo. The actual problem is in the over-conservative
+ handling of INPADDR_ADDRESS / INPUT_ADDRESS / INPUT triples in
+ calculate_needs, but we traditionally work around this problem
+ here by rejecting equivalences when the destination is in a register
+ that's likely spilled. This is fragile, of course, since the
+ preferred class of a pseudo depends on all instructions that set
+ or use it. */
+
+ if (GET_CODE (dest) != REG
+ || (regno = REGNO (dest)) < FIRST_PSEUDO_REGISTER
+ || reg_equiv[regno].init_insns == const0_rtx
+ || (CLASS_LIKELY_SPILLED_P (reg_preferred_class (regno))
+ && GET_CODE (src) == MEM))
+ {
+ /* This might be setting a SUBREG of a pseudo, a pseudo that is
+ also set somewhere else to a constant. */
+ note_stores (set, no_equiv, NULL);
+ continue;
+ }
- if (REG_N_REFS (regno) == 2
- && REG_BASIC_BLOCK (regno) < 0
- && rtx_equal_p (XEXP (note, 0), SET_SRC (set)))
- reg_equiv_replace[regno] = 1;
+ note = find_reg_note (insn, REG_EQUAL, NULL_RTX);
+
+ /* cse sometimes generates function invariants, but doesn't put a
+ REG_EQUAL note on the insn. Since this note would be redundant,
+ there's no point creating it earlier than here. */
+ if (! note && ! rtx_varies_p (src, 0))
+ note = set_unique_reg_note (insn, REG_EQUAL, src);
+
+ /* Don't bother considering a REG_EQUAL note containing an EXPR_LIST
+ since it represents a function call */
+ if (note && GET_CODE (XEXP (note, 0)) == EXPR_LIST)
+ note = NULL_RTX;
+
+ if (REG_N_SETS (regno) != 1
+ && (! note
+ || rtx_varies_p (XEXP (note, 0), 0)
+ || (reg_equiv[regno].replacement
+ && ! rtx_equal_p (XEXP (note, 0),
+ reg_equiv[regno].replacement))))
+ {
+ no_equiv (dest, set, NULL);
+ continue;
+ }
+ /* Record this insn as initializing this register. */
+ reg_equiv[regno].init_insns
+ = gen_rtx_INSN_LIST (VOIDmode, insn, reg_equiv[regno].init_insns);
+
+ /* If this register is known to be equal to a constant, record that
+ it is always equivalent to the constant. */
+ if (note && ! rtx_varies_p (XEXP (note, 0), 0))
+ PUT_MODE (note, (enum machine_mode) REG_EQUIV);
+
+ /* If this insn introduces a "constant" register, decrease the priority
+ of that register. Record this insn if the register is only used once
+ more and the equivalence value is the same as our source.
+
+ The latter condition is checked for two reasons: First, it is an
+ indication that it may be more efficient to actually emit the insn
+ as written (if no registers are available, reload will substitute
+ the equivalence). Secondly, it avoids problems with any registers
+ dying in this insn whose death notes would be missed.
+
+ If we don't have a REG_EQUIV note, see if this insn is loading
+ a register used only in one basic block from a MEM. If so, and the
+ MEM remains unchanged for the life of the register, add a REG_EQUIV
+ note. */
+
+ note = find_reg_note (insn, REG_EQUIV, NULL_RTX);
+
+ if (note == 0 && REG_BASIC_BLOCK (regno) >= 0
+ && GET_CODE (SET_SRC (set)) == MEM
+ && validate_equiv_mem (insn, dest, SET_SRC (set)))
+ REG_NOTES (insn) = note = gen_rtx_EXPR_LIST (REG_EQUIV, SET_SRC (set),
+ REG_NOTES (insn));
+
+ if (note)
+ {
+ int regno = REGNO (dest);
+
+ /* Record whether or not we created a REG_EQUIV note for a LABEL_REF.
+ We might end up substituting the LABEL_REF for uses of the
+ pseudo here or later. That kind of transformation may turn an
+ indirect jump into a direct jump, in which case we must rerun the
+ jump optimizer to ensure that the JUMP_LABEL fields are valid. */
+ if (GET_CODE (XEXP (note, 0)) == LABEL_REF
+ || (GET_CODE (XEXP (note, 0)) == CONST
+ && GET_CODE (XEXP (XEXP (note, 0), 0)) == PLUS
+ && (GET_CODE (XEXP (XEXP (XEXP (note, 0), 0), 0))
+ == LABEL_REF)))
+ recorded_label_ref = 1;
+
+ reg_equiv[regno].replacement = XEXP (note, 0);
+ reg_equiv[regno].src_p = &SET_SRC (set);
+ reg_equiv[regno].loop_depth = loop_depth;
+
+ /* Don't mess with things live during setjmp. */
+ if (REG_LIVE_LENGTH (regno) >= 0 && optimize)
+ {
+ /* Note that the statement below does not affect the priority
+ in local-alloc! */
+ REG_LIVE_LENGTH (regno) *= 2;
+
+
+ /* If the register is referenced exactly twice, meaning it is
+ set once and used once, indicate that the reference may be
+ replaced by the equivalence we computed above. Do this
+ even if the register is only used in one block so that
+ dependencies can be handled where the last register is
+ used in a different block (i.e. HIGH / LO_SUM sequences)
+ and to reduce the number of registers alive across
+ calls. */
+
+ if (REG_N_REFS (regno) == 2
+ && (rtx_equal_p (XEXP (note, 0), src)
+ || ! equiv_init_varies_p (src))
+ && GET_CODE (insn) == INSN
+ && equiv_init_movable_p (PATTERN (insn), regno))
+ reg_equiv[regno].replace = 1;
+ }
}
}
}
registers only used that once. If so, see if we can replace the
reference with the equivalent from. If we can, delete the
initializing reference and this register will go away. If we
- can't replace the reference, and the instruction is not in a
- loop, then move the register initialization just before the use,
- so that they are in the same basic block. */
- block = -1;
- depth = 0;
- for (insn = get_insns (); insn; insn = NEXT_INSN (insn))
+ can't replace the reference, and the initializing reference is
+ within the same loop (or in an inner loop), then move the register
+ initialization just before the use, so that they are in the same
+ basic block. */
+ FOR_EACH_BB_REVERSE (bb)
{
- rtx link;
+ loop_depth = bb->loop_depth;
+ for (insn = BB_END (bb);
+ insn != PREV_INSN (BB_HEAD (bb));
+ insn = PREV_INSN (insn))
+ {
+ rtx link;
- /* Keep track of which basic block we are in. */
- if (block + 1 < n_basic_blocks
- && BLOCK_HEAD (block + 1) == insn)
- ++block;
+ if (! INSN_P (insn))
+ continue;
- if (GET_RTX_CLASS (GET_CODE (insn)) != 'i')
- {
- if (GET_CODE (insn) == NOTE)
+ for (link = REG_NOTES (insn); link; link = XEXP (link, 1))
{
- if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_BEG)
- ++depth;
- else if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_END)
+ if (REG_NOTE_KIND (link) == REG_DEAD
+ /* Make sure this insn still refers to the register. */
+ && reg_mentioned_p (XEXP (link, 0), PATTERN (insn)))
{
- --depth;
- if (depth < 0)
- abort ();
- }
- }
+ int regno = REGNO (XEXP (link, 0));
+ rtx equiv_insn;
- continue;
- }
+ if (! reg_equiv[regno].replace
+ || reg_equiv[regno].loop_depth < loop_depth)
+ continue;
- for (link = REG_NOTES (insn); link; link = XEXP (link, 1))
- {
- if (REG_NOTE_KIND (link) == REG_DEAD
- /* Make sure this insn still refers to the register. */
- && reg_mentioned_p (XEXP (link, 0), PATTERN (insn)))
- {
- int regno = REGNO (XEXP (link, 0));
- rtx equiv_insn;
+ /* reg_equiv[REGNO].replace gets set only when
+ REG_N_REFS[REGNO] is 2, i.e. the register is set
+ once and used once. (If it were only set, but not used,
+ flow would have deleted the setting insns.) Hence
+ there can only be one insn in reg_equiv[REGNO].init_insns. */
+ if (reg_equiv[regno].init_insns == NULL_RTX
+ || XEXP (reg_equiv[regno].init_insns, 1) != NULL_RTX)
+ abort ();
+ equiv_insn = XEXP (reg_equiv[regno].init_insns, 0);
- if (! reg_equiv_replace[regno])
- continue;
+ /* We may not move instructions that can throw, since
+ that changes basic block boundaries and we are not
+ prepared to adjust the CFG to match. */
+ if (can_throw_internal (equiv_insn))
+ continue;
- /* reg_equiv_replace[REGNO] gets set only when
- REG_N_REFS[REGNO] is 2, i.e. the register is set
- once and used once. (If it were only set, but not used,
- flow would have deleted the setting insns.) Hence
- there can only be one insn in reg_equiv_init_insns. */
- equiv_insn = XEXP (reg_equiv_init_insns[regno], 0);
+ if (asm_noperands (PATTERN (equiv_insn)) < 0
+ && validate_replace_rtx (regno_reg_rtx[regno],
+ *(reg_equiv[regno].src_p), insn))
+ {
+ rtx equiv_link;
+ rtx last_link;
+ rtx note;
+
+ /* Find the last note. */
+ for (last_link = link; XEXP (last_link, 1);
+ last_link = XEXP (last_link, 1))
+ ;
+
+ /* Append the REG_DEAD notes from equiv_insn. */
+ equiv_link = REG_NOTES (equiv_insn);
+ while (equiv_link)
+ {
+ note = equiv_link;
+ equiv_link = XEXP (equiv_link, 1);
+ if (REG_NOTE_KIND (note) == REG_DEAD)
+ {
+ remove_note (equiv_insn, note);
+ XEXP (last_link, 1) = note;
+ XEXP (note, 1) = NULL_RTX;
+ last_link = note;
+ }
+ }
+
+ remove_death (regno, insn);
+ REG_N_REFS (regno) = 0;
+ REG_FREQ (regno) = 0;
+ delete_insn (equiv_insn);
+
+ reg_equiv[regno].init_insns
+ = XEXP (reg_equiv[regno].init_insns, 1);
+ }
+ /* Move the initialization of the register to just before
+ INSN. Update the flow information. */
+ else if (PREV_INSN (insn) != equiv_insn)
+ {
+ rtx new_insn;
- if (validate_replace_rtx (regno_reg_rtx[regno],
- reg_equiv_replacement[regno], insn))
- {
- remove_death (regno, insn);
- REG_N_REFS (regno) = 0;
- PUT_CODE (equiv_insn, NOTE);
- NOTE_LINE_NUMBER (equiv_insn) = NOTE_INSN_DELETED;
- NOTE_SOURCE_FILE (equiv_insn) = 0;
- }
- /* If we aren't in a loop, and there are no calls in
- INSN or in the initialization of the register, then
- move the initialization of the register to just
- before INSN. Update the flow information. */
- else if (depth == 0
- && GET_CODE (equiv_insn) == INSN
- && GET_CODE (insn) == INSN
- && REG_BASIC_BLOCK (regno) < 0)
- {
- int l;
+ new_insn = emit_insn_before (PATTERN (equiv_insn), insn);
+ REG_NOTES (new_insn) = REG_NOTES (equiv_insn);
+ REG_NOTES (equiv_insn) = 0;
- emit_insn_before (copy_rtx (PATTERN (equiv_insn)), insn);
- REG_NOTES (PREV_INSN (insn)) = REG_NOTES (equiv_insn);
+ /* Make sure this insn is recognized before reload begins,
+ otherwise eliminate_regs_in_insn will abort. */
+ INSN_CODE (new_insn) = INSN_CODE (equiv_insn);
- PUT_CODE (equiv_insn, NOTE);
- NOTE_LINE_NUMBER (equiv_insn) = NOTE_INSN_DELETED;
- NOTE_SOURCE_FILE (equiv_insn) = 0;
- REG_NOTES (equiv_insn) = 0;
+ delete_insn (equiv_insn);
- if (block < 0)
- REG_BASIC_BLOCK (regno) = 0;
- else
- REG_BASIC_BLOCK (regno) = block;
- REG_N_CALLS_CROSSED (regno) = 0;
- REG_LIVE_LENGTH (regno) = 2;
+ XEXP (reg_equiv[regno].init_insns, 0) = new_insn;
- if (block >= 0 && insn == BLOCK_HEAD (block))
- BLOCK_HEAD (block) = PREV_INSN (insn);
+ REG_BASIC_BLOCK (regno) = bb->index;
+ REG_N_CALLS_CROSSED (regno) = 0;
+ REG_LIVE_LENGTH (regno) = 2;
- for (l = 0; l < n_basic_blocks; l++)
- CLEAR_REGNO_REG_SET (BASIC_BLOCK (l)->global_live_at_start,
- regno);
+ if (insn == BB_HEAD (bb))
+ BB_HEAD (bb) = PREV_INSN (insn);
+
+ /* Remember to clear REGNO from all basic block's live
+ info. */
+ SET_REGNO_REG_SET (&cleared_regs, regno);
+ clear_regnos++;
+ }
}
}
}
}
+
+ /* Clear all dead REGNOs from all basic block's live info. */
+ if (clear_regnos)
+ {
+ int j;
+ if (clear_regnos > 8)
+ {
+ FOR_EACH_BB (bb)
+ {
+ AND_COMPL_REG_SET (bb->global_live_at_start, &cleared_regs);
+ AND_COMPL_REG_SET (bb->global_live_at_end, &cleared_regs);
+ }
+ }
+ else
+ EXECUTE_IF_SET_IN_REG_SET (&cleared_regs, 0, j,
+ {
+ FOR_EACH_BB (bb)
+ {
+ CLEAR_REGNO_REG_SET (bb->global_live_at_start, j);
+ CLEAR_REGNO_REG_SET (bb->global_live_at_end, j);
+ }
+ });
+ }
+
+ /* Clean up. */
+ end_alias_analysis ();
+ CLEAR_REG_SET (&cleared_regs);
+ free (reg_equiv);
}
/* Mark REG as having no known equivalence.
- Some instructions might have been proceessed before and furnished
+ Some instructions might have been processed before and furnished
with REG_EQUIV notes for this register; these notes will have to be
removed.
STORE is the piece of RTL that does the non-constant / conflicting
assignment - a SET, CLOBBER or REG_INC note. It is currently not used,
but needs to be there because this function is called from note_stores. */
static void
-no_equiv (reg, store)
- rtx reg, store ATTRIBUTE_UNUSED;
+no_equiv (rtx reg, rtx store ATTRIBUTE_UNUSED, void *data ATTRIBUTE_UNUSED)
{
int regno;
rtx list;
if (GET_CODE (reg) != REG)
return;
regno = REGNO (reg);
- list = reg_equiv_init_insns[regno];
+ list = reg_equiv[regno].init_insns;
if (list == const0_rtx)
return;
for (; list; list = XEXP (list, 1))
rtx insn = XEXP (list, 0);
remove_note (insn, find_reg_note (insn, REG_EQUIV, NULL_RTX));
}
- reg_equiv_init_insns[regno] = const0_rtx;
- reg_equiv_replacement[regno] = NULL_RTX;
+ reg_equiv[regno].init_insns = const0_rtx;
+ reg_equiv[regno].replacement = NULL_RTX;
}
\f
/* Allocate hard regs to the pseudo regs used only within block number B.
Only the pseudos that die but once can be handled. */
static void
-block_alloc (b)
- int b;
+block_alloc (int b)
{
- register int i, q;
- register rtx insn;
- rtx note;
+ int i, q;
+ rtx insn;
+ rtx note, hard_reg;
int insn_number = 0;
int insn_count = 0;
int max_uid = get_max_uid ();
/* Count the instructions in the basic block. */
- insn = BLOCK_END (b);
+ insn = BB_END (BASIC_BLOCK (b));
while (1)
{
if (GET_CODE (insn) != NOTE)
if (++insn_count > max_uid)
abort ();
- if (insn == BLOCK_HEAD (b))
+ if (insn == BB_HEAD (BASIC_BLOCK (b)))
break;
insn = PREV_INSN (insn);
}
/* +2 to leave room for a post_mark_life at the last insn and for
the birth of a CLOBBER in the first insn. */
- regs_live_at = (HARD_REG_SET *) alloca ((2 * insn_count + 2)
- * sizeof (HARD_REG_SET));
- bzero ((char *) regs_live_at, (2 * insn_count + 2) * sizeof (HARD_REG_SET));
+ regs_live_at = xcalloc ((2 * insn_count + 2), sizeof (HARD_REG_SET));
/* Initialize table of hardware registers currently live. */
and assigns quantities to registers.
It computes which registers to tie. */
- insn = BLOCK_HEAD (b);
+ insn = BB_HEAD (BASIC_BLOCK (b));
while (1)
{
- register rtx body = PATTERN (insn);
-
if (GET_CODE (insn) != NOTE)
insn_number++;
- if (GET_RTX_CLASS (GET_CODE (insn)) == 'i')
+ if (INSN_P (insn))
{
- register rtx link, set;
- register int win = 0;
- register rtx r0, r1;
+ rtx link, set;
+ int win = 0;
+ rtx r0, r1 = NULL_RTX;
int combined_regno = -1;
int i;
If tying is done, WIN is set nonzero. */
- if (1
-#ifdef REGISTER_CONSTRAINTS
- && recog_n_operands > 1
- && recog_constraints[0][0] == '='
- && recog_constraints[0][1] != '&'
-#else
- && GET_CODE (PATTERN (insn)) == SET
- && rtx_equal_p (SET_DEST (PATTERN (insn)), recog_operand[0])
-#endif
- )
+ if (optimize
+ && recog_data.n_operands > 1
+ && recog_data.constraints[0][0] == '='
+ && recog_data.constraints[0][1] != '&')
{
-#ifdef REGISTER_CONSTRAINTS
/* If non-negative, is an operand that must match operand 0. */
int must_match_0 = -1;
/* Counts number of alternatives that require a match with
operand 0. */
int n_matching_alts = 0;
- for (i = 1; i < recog_n_operands; i++)
+ for (i = 1; i < recog_data.n_operands; i++)
{
- const char *p = recog_constraints[i];
- int this_match = (requires_inout (p));
+ const char *p = recog_data.constraints[i];
+ int this_match = requires_inout (p);
n_matching_alts += this_match;
- if (this_match == recog_n_alternatives)
+ if (this_match == recog_data.n_alternatives)
must_match_0 = i;
}
-#endif
- r0 = recog_operand[0];
- for (i = 1; i < recog_n_operands; i++)
+ r0 = recog_data.operand[0];
+ for (i = 1; i < recog_data.n_operands; i++)
{
-#ifdef REGISTER_CONSTRAINTS
/* Skip this operand if we found an operand that
must match operand 0 and this operand isn't it
and can't be made to be it by commutativity. */
if (must_match_0 >= 0 && i != must_match_0
&& ! (i == must_match_0 + 1
- && recog_constraints[i-1][0] == '%')
+ && recog_data.constraints[i-1][0] == '%')
&& ! (i == must_match_0 - 1
- && recog_constraints[i][0] == '%'))
+ && recog_data.constraints[i][0] == '%'))
continue;
/* Likewise if each alternative has some operand that
- must match operand zero. In that case, skip any
+ must match operand zero. In that case, skip any
operand that doesn't list operand 0 since we know that
the operand always conflicts with operand 0. We
- ignore commutatity in this case to keep things simple. */
- if (n_matching_alts == recog_n_alternatives
- && 0 == requires_inout (recog_constraints[i]))
+ ignore commutativity in this case to keep things simple. */
+ if (n_matching_alts == recog_data.n_alternatives
+ && 0 == requires_inout (recog_data.constraints[i]))
continue;
-#endif
- r1 = recog_operand[i];
+ r1 = recog_data.operand[i];
/* If the operand is an address, find a register in it.
There may be more than one register, but we only try one
of them. */
- if (
-#ifdef REGISTER_CONSTRAINTS
- recog_constraints[i][0] == 'p'
-#else
- recog_operand_address_p[i]
-#endif
- )
+ if (recog_data.constraints[i][0] == 'p'
+ || EXTRA_ADDRESS_CONSTRAINT (recog_data.constraints[i][0],
+ recog_data.constraints[i]))
while (GET_CODE (r1) == PLUS || GET_CODE (r1) == MULT)
r1 = XEXP (r1, 0);
+ /* Avoid making a call-saved register unnecessarily
+ clobbered. */
+ hard_reg = get_hard_reg_initial_reg (cfun, r1);
+ if (hard_reg != NULL_RTX)
+ {
+ if (GET_CODE (hard_reg) == REG
+ && IN_RANGE (REGNO (hard_reg),
+ 0, FIRST_PSEUDO_REGISTER - 1)
+ && ! call_used_regs[REGNO (hard_reg)])
+ continue;
+ }
+
if (GET_CODE (r0) == REG || GET_CODE (r0) == SUBREG)
{
/* We have two priorities for hard register preferences.
can only be in the same register as the output, give
priority to an equivalence found from that insn. */
int may_save_copy
- = ((SET_DEST (body) == r0 && SET_SRC (body) == r1)
-#ifdef REGISTER_CONSTRAINTS
- || (r1 == recog_operand[i] && must_match_0 >= 0)
-#endif
- );
-
+ = (r1 == recog_data.operand[i] && must_match_0 >= 0);
+
if (GET_CODE (r1) == REG || GET_CODE (r1) == SUBREG)
win = combine_regs (r1, r0, may_save_copy,
insn_number, insn, 0);
destination register won't have had a quantity number
assigned, since that would prevent combining. */
- if (GET_CODE (PATTERN (insn)) == CLOBBER
+ if (optimize
+ && GET_CODE (PATTERN (insn)) == CLOBBER
&& (r0 = XEXP (PATTERN (insn), 0),
GET_CODE (r0) == REG)
&& (link = find_reg_note (insn, REG_LIBCALL, NULL_RTX)) != 0
for (link = REG_NOTES (insn); link; link = XEXP (link, 1))
if (REG_NOTE_KIND (link) == REG_DEAD
&& GET_CODE (XEXP (link, 0)) == REG
- && combined_regno != REGNO (XEXP (link, 0))
- && (no_conflict_combined_regno != REGNO (XEXP (link, 0))
- || ! find_reg_note (insn, REG_NO_CONFLICT, XEXP (link, 0))))
+ && combined_regno != (int) REGNO (XEXP (link, 0))
+ && (no_conflict_combined_regno != (int) REGNO (XEXP (link, 0))
+ || ! find_reg_note (insn, REG_NO_CONFLICT,
+ XEXP (link, 0))))
wipe_dead_reg (XEXP (link, 0), 0);
/* Allocate qty numbers for all registers local to this block
that are born (set) in this instruction.
A pseudo that already has a qty is not changed. */
- note_stores (PATTERN (insn), reg_is_set);
+ note_stores (PATTERN (insn), reg_is_set, NULL);
/* If anything is set in this insn and then unused, mark it as dying
after this insn, so it will conflict with our outputs. This
&& GET_CODE (XEXP (link, 0)) == REG)
wipe_dead_reg (XEXP (link, 0), 1);
- /* If this is an insn that has a REG_RETVAL note pointing at a
+ /* If this is an insn that has a REG_RETVAL note pointing at a
CLOBBER insn, we have reached the end of a REG_NO_CONFLICT
block, so clear any register number that combined within it. */
if ((note = find_reg_note (insn, REG_RETVAL, NULL_RTX)) != 0
IOR_HARD_REG_SET (regs_live_at[2 * insn_number], regs_live);
IOR_HARD_REG_SET (regs_live_at[2 * insn_number + 1], regs_live);
- if (insn == BLOCK_END (b))
+ if (insn == BB_END (BASIC_BLOCK (b)))
break;
insn = NEXT_INSN (insn);
/* Now every register that is local to this basic block
should have been given a quantity, or else -1 meaning ignore it.
- Every quantity should have a known birth and death.
+ Every quantity should have a known birth and death.
Order the qtys so we assign them registers in order of the
number of suggested registers they need so we allocate those with
the most restrictive needs first. */
- qty_order = (int *) alloca (next_qty * sizeof (int));
+ qty_order = xmalloc (next_qty * sizeof (int));
for (i = 0; i < next_qty; i++)
qty_order[i] = i;
{
q = qty_order[i];
if (qty_phys_num_sugg[q] != 0 || qty_phys_num_copy_sugg[q] != 0)
- qty_phys_reg[q] = find_free_reg (qty_min_class[q], qty_mode[q], q,
- 0, 1, qty_birth[q], qty_death[q]);
+ qty[q].phys_reg = find_free_reg (qty[q].min_class, qty[q].mode, q,
+ 0, 1, qty[q].birth, qty[q].death);
else
- qty_phys_reg[q] = -1;
+ qty[q].phys_reg = -1;
}
- /* Order the qtys so we assign them registers in order of
- decreasing length of life. Normally call qsort, but if we
+ /* Order the qtys so we assign them registers in order of
+ decreasing length of life. Normally call qsort, but if we
have only a very small number of quantities, sort them ourselves. */
for (i = 0; i < next_qty; i++)
for (i = 0; i < next_qty; i++)
{
q = qty_order[i];
- if (qty_phys_reg[q] < 0)
+ if (qty[q].phys_reg < 0)
{
#ifdef INSN_SCHEDULING
/* These values represent the adjusted lifetime of a qty so
The purpose behind extending the lifetime of this qty is to
discourage the register allocator from creating false
dependencies.
-
- The adjustment value is choosen to indicate that this qty
+
+ The adjustment value is chosen to indicate that this qty
conflicts with all the qtys in the instructions immediately
before and after the lifetime of this qty.
If allocation using the extended lifetime fails we will try
again with the qty's unadjusted lifetime. */
- int fake_birth = MAX (0, qty_birth[q] - 2 + qty_birth[q] % 2);
+ int fake_birth = MAX (0, qty[q].birth - 2 + qty[q].birth % 2);
int fake_death = MIN (insn_number * 2 + 1,
- qty_death[q] + 2 - qty_death[q] % 2);
+ qty[q].death + 2 - qty[q].death % 2);
#endif
if (N_REG_CLASSES > 1)
&& !optimize_size
&& !SMALL_REGISTER_CLASSES)
{
-
- qty_phys_reg[q] = find_free_reg (qty_min_class[q],
- qty_mode[q], q, 0, 0,
+ qty[q].phys_reg = find_free_reg (qty[q].min_class,
+ qty[q].mode, q, 0, 0,
fake_birth, fake_death);
- if (qty_phys_reg[q] >= 0)
+ if (qty[q].phys_reg >= 0)
continue;
}
#endif
- qty_phys_reg[q] = find_free_reg (qty_min_class[q],
- qty_mode[q], q, 0, 0,
- qty_birth[q], qty_death[q]);
- if (qty_phys_reg[q] >= 0)
+ qty[q].phys_reg = find_free_reg (qty[q].min_class,
+ qty[q].mode, q, 0, 0,
+ qty[q].birth, qty[q].death);
+ if (qty[q].phys_reg >= 0)
continue;
}
if (flag_schedule_insns_after_reload
&& !optimize_size
&& !SMALL_REGISTER_CLASSES
- && qty_alternate_class[q] != NO_REGS)
- qty_phys_reg[q] = find_free_reg (qty_alternate_class[q],
- qty_mode[q], q, 0, 0,
+ && qty[q].alternate_class != NO_REGS)
+ qty[q].phys_reg = find_free_reg (qty[q].alternate_class,
+ qty[q].mode, q, 0, 0,
fake_birth, fake_death);
#endif
- if (qty_alternate_class[q] != NO_REGS)
- qty_phys_reg[q] = find_free_reg (qty_alternate_class[q],
- qty_mode[q], q, 0, 0,
- qty_birth[q], qty_death[q]);
+ if (qty[q].alternate_class != NO_REGS)
+ qty[q].phys_reg = find_free_reg (qty[q].alternate_class,
+ qty[q].mode, q, 0, 0,
+ qty[q].birth, qty[q].death);
}
}
to the pseudo regs belonging to the qtys. */
for (q = 0; q < next_qty; q++)
- if (qty_phys_reg[q] >= 0)
+ if (qty[q].phys_reg >= 0)
{
- for (i = qty_first_reg[q]; i >= 0; i = reg_next_in_qty[i])
- reg_renumber[i] = qty_phys_reg[q] + reg_offset[i];
+ for (i = qty[q].first_reg; i >= 0; i = reg_next_in_qty[i])
+ reg_renumber[i] = qty[q].phys_reg + reg_offset[i];
}
+
+ /* Clean up. */
+ free (regs_live_at);
+ free (qty_order);
}
\f
/* Compare two quantities' priority for getting real registers.
/* Note that the quotient will never be bigger than
the value of floor_log2 times the maximum number of
- times a register can occur in one insn (surely less than 100).
- Multiplying this by 10000 can't overflow.
+ times a register can occur in one insn (surely less than 100)
+ weighted by frequency (max REG_FREQ_MAX).
+ Multiplying this by 10000/REG_FREQ_MAX can't overflow.
QTY_CMP_PRI is also used by qty_sugg_compare. */
#define QTY_CMP_PRI(q) \
- ((int) (((double) (floor_log2 (qty_n_refs[q]) * qty_n_refs[q] * qty_size[q]) \
- / (qty_death[q] - qty_birth[q])) * 10000))
+ ((int) (((double) (floor_log2 (qty[q].n_refs) * qty[q].freq * qty[q].size) \
+ / (qty[q].death - qty[q].birth)) * (10000 / REG_FREQ_MAX)))
static int
-qty_compare (q1, q2)
- int q1, q2;
+qty_compare (int q1, int q2)
{
return QTY_CMP_PRI (q2) - QTY_CMP_PRI (q1);
}
static int
-qty_compare_1 (q1p, q2p)
- const GENERIC_PTR q1p;
- const GENERIC_PTR q2p;
+qty_compare_1 (const void *q1p, const void *q2p)
{
- register int q1 = *(int *)q1p, q2 = *(int *)q2p;
- register int tem = QTY_CMP_PRI (q2) - QTY_CMP_PRI (q1);
+ int q1 = *(const int *) q1p, q2 = *(const int *) q2p;
+ int tem = QTY_CMP_PRI (q2) - QTY_CMP_PRI (q1);
if (tem != 0)
return tem;
: qty_phys_num_sugg[q] * FIRST_PSEUDO_REGISTER)
static int
-qty_sugg_compare (q1, q2)
- int q1, q2;
+qty_sugg_compare (int q1, int q2)
{
- register int tem = QTY_CMP_SUGG (q1) - QTY_CMP_SUGG (q2);
+ int tem = QTY_CMP_SUGG (q1) - QTY_CMP_SUGG (q2);
if (tem != 0)
return tem;
-
+
return QTY_CMP_PRI (q2) - QTY_CMP_PRI (q1);
}
static int
-qty_sugg_compare_1 (q1p, q2p)
- const GENERIC_PTR q1p;
- const GENERIC_PTR q2p;
+qty_sugg_compare_1 (const void *q1p, const void *q2p)
{
- register int q1 = *(int *)q1p, q2 = *(int *)q2p;
- register int tem = QTY_CMP_SUGG (q1) - QTY_CMP_SUGG (q2);
+ int q1 = *(const int *) q1p, q2 = *(const int *) q2p;
+ int tem = QTY_CMP_SUGG (q1) - QTY_CMP_SUGG (q2);
if (tem != 0)
return tem;
Combining registers means marking them as having the same quantity
and adjusting the offsets within the quantity if either of
- them is a SUBREG).
+ them is a SUBREG.
We don't actually combine a hard reg with a pseudo; instead
we just record the hard reg as the suggestion for the pseudo's quantity.
If we really combined them, we could lose if the pseudo lives
across an insn that clobbers the hard reg (eg, movstr).
- ALREADY_DEAD is non-zero if USEDREG is known to be dead even though
+ ALREADY_DEAD is nonzero if USEDREG is known to be dead even though
there is no REG_DEAD note on INSN. This occurs during the processing
of REG_NO_CONFLICT blocks.
- MAY_SAVE_COPYCOPY is non-zero if this insn is simply copying USEDREG to
+ MAY_SAVE_COPY is nonzero if this insn is simply copying USEDREG to
SETREG or if the input and output must share a register.
In that case, we record a hard reg suggestion in QTY_PHYS_COPY_SUGG.
-
+
There are elaborate checks for the validity of combining. */
-
static int
-combine_regs (usedreg, setreg, may_save_copy, insn_number, insn, already_dead)
- rtx usedreg, setreg;
- int may_save_copy;
- int insn_number;
- rtx insn;
- int already_dead;
+combine_regs (rtx usedreg, rtx setreg, int may_save_copy, int insn_number,
+ rtx insn, int already_dead)
{
- register int ureg, sreg;
- register int offset = 0;
+ int ureg, sreg;
+ int offset = 0;
int usize, ssize;
- register int sqty;
+ int sqty;
/* Determine the numbers and sizes of registers being used. If a subreg
is present that does not change the entire register, don't consider
while (GET_CODE (usedreg) == SUBREG)
{
- if (GET_MODE_SIZE (GET_MODE (SUBREG_REG (usedreg))) > UNITS_PER_WORD)
- may_save_copy = 0;
- offset += SUBREG_WORD (usedreg);
- usedreg = SUBREG_REG (usedreg);
+ rtx subreg = SUBREG_REG (usedreg);
+
+ if (GET_CODE (subreg) == REG)
+ {
+ if (GET_MODE_SIZE (GET_MODE (subreg)) > UNITS_PER_WORD)
+ may_save_copy = 0;
+
+ if (REGNO (subreg) < FIRST_PSEUDO_REGISTER)
+ offset += subreg_regno_offset (REGNO (subreg),
+ GET_MODE (subreg),
+ SUBREG_BYTE (usedreg),
+ GET_MODE (usedreg));
+ else
+ offset += (SUBREG_BYTE (usedreg)
+ / REGMODE_NATURAL_SIZE (GET_MODE (usedreg)));
+ }
+
+ usedreg = subreg;
}
+
if (GET_CODE (usedreg) != REG)
return 0;
+
ureg = REGNO (usedreg);
- usize = REG_SIZE (usedreg);
+ if (ureg < FIRST_PSEUDO_REGISTER)
+ usize = HARD_REGNO_NREGS (ureg, GET_MODE (usedreg));
+ else
+ usize = ((GET_MODE_SIZE (GET_MODE (usedreg))
+ + (REGMODE_NATURAL_SIZE (GET_MODE (usedreg)) - 1))
+ / REGMODE_NATURAL_SIZE (GET_MODE (usedreg)));
while (GET_CODE (setreg) == SUBREG)
{
- if (GET_MODE_SIZE (GET_MODE (SUBREG_REG (setreg))) > UNITS_PER_WORD)
- may_save_copy = 0;
- offset -= SUBREG_WORD (setreg);
- setreg = SUBREG_REG (setreg);
+ rtx subreg = SUBREG_REG (setreg);
+
+ if (GET_CODE (subreg) == REG)
+ {
+ if (GET_MODE_SIZE (GET_MODE (subreg)) > UNITS_PER_WORD)
+ may_save_copy = 0;
+
+ if (REGNO (subreg) < FIRST_PSEUDO_REGISTER)
+ offset -= subreg_regno_offset (REGNO (subreg),
+ GET_MODE (subreg),
+ SUBREG_BYTE (setreg),
+ GET_MODE (setreg));
+ else
+ offset -= (SUBREG_BYTE (setreg)
+ / REGMODE_NATURAL_SIZE (GET_MODE (setreg)));
+ }
+
+ setreg = subreg;
}
+
if (GET_CODE (setreg) != REG)
return 0;
+
sreg = REGNO (setreg);
- ssize = REG_SIZE (setreg);
+ if (sreg < FIRST_PSEUDO_REGISTER)
+ ssize = HARD_REGNO_NREGS (sreg, GET_MODE (setreg));
+ else
+ ssize = ((GET_MODE_SIZE (GET_MODE (setreg))
+ + (REGMODE_NATURAL_SIZE (GET_MODE (setreg)) - 1))
+ / REGMODE_NATURAL_SIZE (GET_MODE (setreg)));
/* If UREG is a pseudo-register that hasn't already been assigned a
quantity number, it means that it is not local to this block or dies
/* Do not combine with a smaller already-assigned object
if that smaller object is already combined with something bigger. */
|| (ssize > usize && ureg >= FIRST_PSEUDO_REGISTER
- && usize < qty_size[reg_qty[ureg]])
+ && usize < qty[reg_qty[ureg]].size)
/* Can't combine if SREG is not a register we can allocate. */
|| (sreg >= FIRST_PSEUDO_REGISTER && reg_qty[sreg] == -1)
/* Don't combine with a pseudo mentioned in a REG_NO_CONFLICT note.
|| ureg == sreg
/* Don't try to connect two different hardware registers. */
|| (ureg < FIRST_PSEUDO_REGISTER && sreg < FIRST_PSEUDO_REGISTER)
- /* Don't use a hard reg that might be spilled. */
- || (ureg < FIRST_PSEUDO_REGISTER
- && CLASS_LIKELY_SPILLED_P (REGNO_REG_CLASS (ureg)))
- || (sreg < FIRST_PSEUDO_REGISTER
- && CLASS_LIKELY_SPILLED_P (REGNO_REG_CLASS (sreg)))
/* Don't connect two different machine modes if they have different
implications as to which registers may be used. */
|| !MODES_TIEABLE_P (GET_MODE (usedreg), GET_MODE (setreg)))
are compatible. */
if ((already_dead || find_regno_note (insn, REG_DEAD, ureg))
- && reg_meets_class_p (sreg, qty_min_class[reg_qty[ureg]]))
+ && reg_meets_class_p (sreg, qty[reg_qty[ureg]].min_class))
{
/* Add SREG to UREG's quantity. */
sqty = reg_qty[ureg];
reg_qty[sreg] = sqty;
reg_offset[sreg] = reg_offset[ureg] + offset;
- reg_next_in_qty[sreg] = qty_first_reg[sqty];
- qty_first_reg[sqty] = sreg;
+ reg_next_in_qty[sreg] = qty[sqty].first_reg;
+ qty[sqty].first_reg = sreg;
- /* If SREG's reg class is smaller, set qty_min_class[SQTY]. */
+ /* If SREG's reg class is smaller, set qty[SQTY].min_class. */
update_qty_class (sqty, sreg);
/* Update info about quantity SQTY. */
- qty_n_calls_crossed[sqty] += REG_N_CALLS_CROSSED (sreg);
- qty_n_refs[sqty] += REG_N_REFS (sreg);
+ qty[sqty].n_calls_crossed += REG_N_CALLS_CROSSED (sreg);
+ qty[sqty].n_refs += REG_N_REFS (sreg);
+ qty[sqty].freq += REG_FREQ (sreg);
if (usize < ssize)
{
- register int i;
+ int i;
- for (i = qty_first_reg[sqty]; i >= 0; i = reg_next_in_qty[i])
+ for (i = qty[sqty].first_reg; i >= 0; i = reg_next_in_qty[i])
reg_offset[i] -= offset;
- qty_size[sqty] = ssize;
- qty_mode[sqty] = GET_MODE (setreg);
+ qty[sqty].size = ssize;
+ qty[sqty].mode = GET_MODE (setreg);
}
}
else
True if REG's reg class either contains or is contained in CLASS. */
static int
-reg_meets_class_p (reg, class)
- int reg;
- enum reg_class class;
+reg_meets_class_p (int reg, enum reg_class class)
{
- register enum reg_class rclass = reg_preferred_class (reg);
+ enum reg_class rclass = reg_preferred_class (reg);
return (reg_class_subset_p (rclass, class)
|| reg_class_subset_p (class, rclass));
}
-/* Update the class of QTY assuming that REG is being tied to it. */
+/* Update the class of QTYNO assuming that REG is being tied to it. */
static void
-update_qty_class (qty, reg)
- int qty;
- int reg;
+update_qty_class (int qtyno, int reg)
{
enum reg_class rclass = reg_preferred_class (reg);
- if (reg_class_subset_p (rclass, qty_min_class[qty]))
- qty_min_class[qty] = rclass;
+ if (reg_class_subset_p (rclass, qty[qtyno].min_class))
+ qty[qtyno].min_class = rclass;
rclass = reg_alternate_class (reg);
- if (reg_class_subset_p (rclass, qty_alternate_class[qty]))
- qty_alternate_class[qty] = rclass;
-
- if (REG_CHANGES_SIZE (reg))
- qty_changes_size[qty] = 1;
+ if (reg_class_subset_p (rclass, qty[qtyno].alternate_class))
+ qty[qtyno].alternate_class = rclass;
}
\f
/* Handle something which alters the value of an rtx REG.
carry info from `block_alloc'. */
static void
-reg_is_set (reg, setter)
- rtx reg;
- rtx setter;
+reg_is_set (rtx reg, rtx setter, void *data ATTRIBUTE_UNUSED)
{
/* Note that note_stores will only pass us a SUBREG if it is a SUBREG of
a hard register. These may actually not exist any more. */
BIRTH is the index at which this is happening. */
static void
-reg_is_born (reg, birth)
- rtx reg;
- int birth;
+reg_is_born (rtx reg, int birth)
{
- register int regno;
-
+ int regno;
+
if (GET_CODE (reg) == SUBREG)
- regno = REGNO (SUBREG_REG (reg)) + SUBREG_WORD (reg);
+ {
+ regno = REGNO (SUBREG_REG (reg));
+ if (regno < FIRST_PSEUDO_REGISTER)
+ regno = subreg_hard_regno (reg, 1);
+ }
else
regno = REGNO (reg);
/* If this register has a quantity number, show that it isn't dead. */
if (reg_qty[regno] >= 0)
- qty_death[reg_qty[regno]] = -1;
+ qty[reg_qty[regno]].death = -1;
}
}
-/* Record the death of REG in the current insn. If OUTPUT_P is non-zero,
+/* Record the death of REG in the current insn. If OUTPUT_P is nonzero,
REG is an output that is dying (i.e., it is never used), otherwise it
is an input (the normal case).
If OUTPUT_P is 1, then we extend the life past the end of this insn. */
static void
-wipe_dead_reg (reg, output_p)
- register rtx reg;
- int output_p;
+wipe_dead_reg (rtx reg, int output_p)
{
- register int regno = REGNO (reg);
+ int regno = REGNO (reg);
/* If this insn has multiple results,
and the dead reg is used in one of the results,
extend its life to after this insn,
- so it won't get allocated together with any other result of this insn.
+ so it won't get allocated together with any other result of this insn.
It is unsafe to use !single_set here since it will ignore an unused
output. Just because an output is unused does not mean the compiler
not to happen). */
if (output_p)
post_mark_life (regno, GET_MODE (reg), 1,
- 2 * this_insn_number, 2 * this_insn_number+ 1);
+ 2 * this_insn_number, 2 * this_insn_number + 1);
}
else if (reg_qty[regno] >= 0)
- qty_death[reg_qty[regno]] = 2 * this_insn_number + output_p;
+ qty[reg_qty[regno]].death = 2 * this_insn_number + output_p;
}
\f
/* Find a block of SIZE words of hard regs in reg_class CLASS
(but actually we test only the first of the block for holding MODE)
and still free between insn BORN_INDEX and insn DEAD_INDEX,
and return the number of the first of them.
- Return -1 if such a block cannot be found.
- If QTY crosses calls, insist on a register preserved by calls,
+ Return -1 if such a block cannot be found.
+ If QTYNO crosses calls, insist on a register preserved by calls,
unless ACCEPT_CALL_CLOBBERED is nonzero.
- If JUST_TRY_SUGGESTED is non-zero, only try to see if the suggested
+ If JUST_TRY_SUGGESTED is nonzero, only try to see if the suggested
register is available. If not, return -1. */
static int
-find_free_reg (class, mode, qty, accept_call_clobbered, just_try_suggested,
- born_index, dead_index)
- enum reg_class class;
- enum machine_mode mode;
- int qty;
- int accept_call_clobbered;
- int just_try_suggested;
- int born_index, dead_index;
+find_free_reg (enum reg_class class, enum machine_mode mode, int qtyno,
+ int accept_call_clobbered, int just_try_suggested,
+ int born_index, int dead_index)
{
- register int i, ins;
-#ifdef HARD_REG_SET
- register /* Declare it register if it's a scalar. */
-#endif
- HARD_REG_SET used, first_used;
+ int i, ins;
+ HARD_REG_SET first_used, used;
#ifdef ELIMINABLE_REGS
- static struct {int from, to; } eliminables[] = ELIMINABLE_REGS;
+ static const struct {const int from, to; } eliminables[] = ELIMINABLE_REGS;
#endif
/* Validate our parameters. */
/* Don't let a pseudo live in a reg across a function call
if we might get a nonlocal goto. */
if (current_function_has_nonlocal_label
- && qty_n_calls_crossed[qty] > 0)
+ && qty[qtyno].n_calls_crossed > 0)
return -1;
if (accept_call_clobbered)
COPY_HARD_REG_SET (used, call_fixed_reg_set);
- else if (qty_n_calls_crossed[qty] == 0)
+ else if (qty[qtyno].n_calls_crossed == 0)
COPY_HARD_REG_SET (used, fixed_reg_set);
else
COPY_HARD_REG_SET (used, call_used_reg_set);
This is true of any register that can be eliminated. */
#ifdef ELIMINABLE_REGS
- for (i = 0; i < (int)(sizeof eliminables / sizeof eliminables[0]); i++)
+ for (i = 0; i < (int) ARRAY_SIZE (eliminables); i++)
SET_HARD_REG_BIT (used, eliminables[i].from);
#if FRAME_POINTER_REGNUM != HARD_FRAME_POINTER_REGNUM
/* If FRAME_POINTER_REGNUM is not a real register, then protect the one
SET_HARD_REG_BIT (used, FRAME_POINTER_REGNUM);
#endif
-#ifdef CLASS_CANNOT_CHANGE_SIZE
- if (qty_changes_size[qty])
- IOR_HARD_REG_SET (used,
- reg_class_contents[(int) CLASS_CANNOT_CHANGE_SIZE]);
+#ifdef CANNOT_CHANGE_MODE_CLASS
+ cannot_change_mode_set_regs (&used, mode, qty[qtyno].first_reg);
#endif
/* Normally, the registers that can be used for the first register in
if (just_try_suggested)
{
- if (qty_phys_num_copy_sugg[qty] != 0)
- IOR_COMPL_HARD_REG_SET (first_used, qty_phys_copy_sugg[qty]);
+ if (qty_phys_num_copy_sugg[qtyno] != 0)
+ IOR_COMPL_HARD_REG_SET (first_used, qty_phys_copy_sugg[qtyno]);
else
- IOR_COMPL_HARD_REG_SET (first_used, qty_phys_sugg[qty]);
+ IOR_COMPL_HARD_REG_SET (first_used, qty_phys_sugg[qtyno]);
}
/* If all registers are excluded, we can't do anything. */
#endif
if (! TEST_HARD_REG_BIT (first_used, regno)
&& HARD_REGNO_MODE_OK (regno, mode)
- && (qty_n_calls_crossed[qty] == 0
+ && (qty[qtyno].n_calls_crossed == 0
|| accept_call_clobbered
|| ! HARD_REGNO_CALL_PART_CLOBBERED (regno, mode)))
{
- register int j;
- register int size1 = HARD_REGNO_NREGS (regno, mode);
+ int j;
+ int size1 = HARD_REGNO_NREGS (regno, mode);
for (j = 1; j < size1 && ! TEST_HARD_REG_BIT (used, regno + j); j++);
if (j == size1)
{
return regno;
}
#ifndef REG_ALLOC_ORDER
- i += j; /* Skip starting points we know will lose */
+ /* Skip starting points we know will lose. */
+ i += j;
#endif
}
}
fail:
-
/* If we are just trying suggested register, we have just tried copy-
suggested registers, and there are arithmetic-suggested registers,
try them. */
-
+
/* If it would be profitable to allocate a call-clobbered register
and save and restore it around calls, do that. */
- if (just_try_suggested && qty_phys_num_copy_sugg[qty] != 0
- && qty_phys_num_sugg[qty] != 0)
+ if (just_try_suggested && qty_phys_num_copy_sugg[qtyno] != 0
+ && qty_phys_num_sugg[qtyno] != 0)
{
/* Don't try the copy-suggested regs again. */
- qty_phys_num_copy_sugg[qty] = 0;
- return find_free_reg (class, mode, qty, accept_call_clobbered, 1,
+ qty_phys_num_copy_sugg[qtyno] = 0;
+ return find_free_reg (class, mode, qtyno, accept_call_clobbered, 1,
born_index, dead_index);
}
if (! accept_call_clobbered
&& flag_caller_saves
&& ! just_try_suggested
- && qty_n_calls_crossed[qty] != 0
- && CALLER_SAVE_PROFITABLE (qty_n_refs[qty], qty_n_calls_crossed[qty]))
+ && qty[qtyno].n_calls_crossed != 0
+ && CALLER_SAVE_PROFITABLE (qty[qtyno].n_refs,
+ qty[qtyno].n_calls_crossed))
{
- i = find_free_reg (class, mode, qty, 1, 0, born_index, dead_index);
+ i = find_free_reg (class, mode, qtyno, 1, 0, born_index, dead_index);
if (i >= 0)
caller_save_needed = 1;
return i;
}
\f
/* Mark that REGNO with machine-mode MODE is live starting from the current
- insn (if LIFE is non-zero) or dead starting at the current insn (if LIFE
+ insn (if LIFE is nonzero) or dead starting at the current insn (if LIFE
is zero). */
static void
-mark_life (regno, mode, life)
- register int regno;
- enum machine_mode mode;
- int life;
+mark_life (int regno, enum machine_mode mode, int life)
{
- register int j = HARD_REGNO_NREGS (regno, mode);
+ int j = HARD_REGNO_NREGS (regno, mode);
if (life)
while (--j >= 0)
SET_HARD_REG_BIT (regs_live, regno + j);
}
/* Mark register number REGNO (with machine-mode MODE) as live (if LIFE
- is non-zero) or dead (if LIFE is zero) from insn number BIRTH (inclusive)
+ is nonzero) or dead (if LIFE is zero) from insn number BIRTH (inclusive)
to insn number DEATH (exclusive). */
static void
-post_mark_life (regno, mode, life, birth, death)
- int regno;
- enum machine_mode mode;
- int life, birth, death;
+post_mark_life (int regno, enum machine_mode mode, int life, int birth,
+ int death)
{
- register int j = HARD_REGNO_NREGS (regno, mode);
-#ifdef HARD_REG_SET
- register /* Declare it register if it's a scalar. */
-#endif
- HARD_REG_SET this_reg;
+ int j = HARD_REGNO_NREGS (regno, mode);
+ HARD_REG_SET this_reg;
CLEAR_HARD_REG_SET (this_reg);
while (--j >= 0)
Otherwise, return 0. */
static int
-no_conflict_p (insn, r0, r1)
- rtx insn, r0, r1;
+no_conflict_p (rtx insn, rtx r0 ATTRIBUTE_UNUSED, rtx r1)
{
int ok = 0;
rtx note = find_reg_note (insn, REG_LIBCALL, NULL_RTX);
last = XEXP (note, 0);
for (p = NEXT_INSN (insn); p && p != last; p = NEXT_INSN (p))
- if (GET_RTX_CLASS (GET_CODE (p)) == 'i')
+ if (INSN_P (p))
{
if (find_reg_note (p, REG_DEAD, r1))
ok = 1;
if (! find_reg_note (p, REG_NO_CONFLICT, r1))
return 0;
}
-
+
return ok;
}
\f
-#ifdef REGISTER_CONSTRAINTS
-
/* Return the number of alternatives for which the constraint string P
indicates that the operand must be equal to operand 0 and that no register
is acceptable. */
static int
-requires_inout (p)
- const char *p;
+requires_inout (const char *p)
{
char c;
int found_zero = 0;
int reg_allowed = 0;
int num_matching_alts = 0;
+ int len;
- while ((c = *p++))
- switch (c)
- {
- case '=': case '+': case '?':
- case '#': case '&': case '!':
- case '*': case '%':
- case '1': case '2': case '3': case '4':
- case 'm': case '<': case '>': case 'V': case 'o':
- case 'E': case 'F': case 'G': case 'H':
- case 's': case 'i': case 'n':
- case 'I': case 'J': case 'K': case 'L':
- case 'M': case 'N': case 'O': case 'P':
-#ifdef EXTRA_CONSTRAINT
- case 'Q': case 'R': case 'S': case 'T': case 'U':
-#endif
- case 'X':
- /* These don't say anything we care about. */
- break;
-
- case ',':
- if (found_zero && ! reg_allowed)
- num_matching_alts++;
-
- found_zero = reg_allowed = 0;
- break;
-
- case '0':
- found_zero = 1;
- break;
-
- case 'p':
- case 'g': case 'r':
- default:
- reg_allowed = 1;
- break;
- }
+ for ( ; (c = *p); p += len)
+ {
+ len = CONSTRAINT_LEN (c, p);
+ switch (c)
+ {
+ case '=': case '+': case '?':
+ case '#': case '&': case '!':
+ case '*': case '%':
+ case 'm': case '<': case '>': case 'V': case 'o':
+ case 'E': case 'F': case 'G': case 'H':
+ case 's': case 'i': case 'n':
+ case 'I': case 'J': case 'K': case 'L':
+ case 'M': case 'N': case 'O': case 'P':
+ case 'X':
+ /* These don't say anything we care about. */
+ break;
+
+ case ',':
+ if (found_zero && ! reg_allowed)
+ num_matching_alts++;
+
+ found_zero = reg_allowed = 0;
+ break;
+
+ case '0':
+ found_zero = 1;
+ break;
+
+ case '1': case '2': case '3': case '4': case '5':
+ case '6': case '7': case '8': case '9':
+ /* Skip the balance of the matching constraint. */
+ do
+ p++;
+ while (ISDIGIT (*p));
+ len = 0;
+ break;
+
+ default:
+ if (REG_CLASS_FROM_CONSTRAINT (c, p) == NO_REGS
+ && !EXTRA_ADDRESS_CONSTRAINT (c, p))
+ break;
+ /* Fall through. */
+ case 'p':
+ case 'g': case 'r':
+ reg_allowed = 1;
+ break;
+ }
+ }
if (found_zero && ! reg_allowed)
num_matching_alts++;
return num_matching_alts;
}
-#endif /* REGISTER_CONSTRAINTS */
\f
void
-dump_local_alloc (file)
- FILE *file;
+dump_local_alloc (FILE *file)
{
- register int i;
+ int i;
for (i = FIRST_PSEUDO_REGISTER; i < max_regno; i++)
if (reg_renumber[i] != -1)
fprintf (file, ";; Register %d in %d.\n", i, reg_renumber[i]);