/* Calculate branch probabilities, and basic block execution counts.
- Copyright (C) 1990, 1991, 1992, 1993, 1994, 1996, 1997, 1998, 1999,
- 2000, 2001, 2002, 2003, 2004, 2005, 2007, 2008, 2009, 2010, 2011, 2012
- Free Software Foundation, Inc.
+ Copyright (C) 1990-2015 Free Software Foundation, Inc.
Contributed by James E. Wilson, UC Berkeley/Cygnus Support;
based on some ideas from Dain Samples of UC Berkeley.
Further mangling by Bob Manson, Cygnus Support.
#include "rtl.h"
#include "flags.h"
#include "regs.h"
-#include "expr.h"
+#include "symtab.h"
+#include "hard-reg-set.h"
#include "function.h"
+#include "alias.h"
+#include "tree.h"
+#include "insn-config.h"
+#include "expmed.h"
+#include "dojump.h"
+#include "explow.h"
+#include "calls.h"
+#include "emit-rtl.h"
+#include "varasm.h"
+#include "stmt.h"
+#include "expr.h"
+#include "predict.h"
+#include "dominance.h"
+#include "cfg.h"
+#include "cfganal.h"
#include "basic-block.h"
#include "diagnostic-core.h"
#include "coverage.h"
#include "value-prof.h"
-#include "tree.h"
-#include "tree-flow.h"
-#include "timevar.h"
+#include "fold-const.h"
+#include "tree-ssa-alias.h"
+#include "internal-fn.h"
+#include "gimple-expr.h"
+#include "gimple.h"
+#include "gimple-iterator.h"
+#include "tree-cfg.h"
#include "cfgloop.h"
-#include "tree-pass.h"
+#include "dumpfile.h"
+#include "cgraph.h"
#include "profile.h"
-struct bb_info {
+struct bb_profile_info {
unsigned int count_valid : 1;
/* Number of successor and predecessor edges. */
gcov_type pred_count;
};
-#define BB_INFO(b) ((struct bb_info *) (b)->aux)
+#define BB_INFO(b) ((struct bb_profile_info *) (b)->aux)
/* Counter summary from the last set of coverage counts read. */
const struct gcov_ctr_summary *profile_info;
+/* Counter working set information computed from the current counter
+ summary. Not initialized unless profile_info summary is non-NULL. */
+static gcov_working_set_t gcov_working_sets[NUM_GCOV_WORKING_SETS];
+
/* Collect statistics on the performance of this pass for the entire source
file. */
static int total_hist_br_prob[20];
static int total_num_branches;
+/* Helper function to update gcov_working_sets. */
+
+void add_working_set (gcov_working_set_t *set) {
+ int i = 0;
+ for (; i < NUM_GCOV_WORKING_SETS; i++)
+ gcov_working_sets[i] = set[i];
+}
+
/* Forward declarations. */
static void find_spanning_tree (struct edge_list *);
int num_edges = NUM_EDGES (el);
basic_block bb;
- FOR_BB_BETWEEN (bb, ENTRY_BLOCK_PTR, NULL, next_bb)
+ FOR_BB_BETWEEN (bb, ENTRY_BLOCK_PTR_FOR_FN (cfun), NULL, next_bb)
{
edge e;
edge_iterator ei;
FOR_EACH_EDGE (e, ei, bb->succs)
{
- struct edge_info *inf = EDGE_INFO (e);
+ struct edge_profile_info *inf = EDGE_INFO (e);
if (!inf->ignore && !inf->on_tree)
{
static void
instrument_values (histogram_values values)
{
- unsigned i, t;
+ unsigned i;
/* Emit code to generate the histograms before the insns. */
- for (i = 0; i < VEC_length (histogram_value, values); i++)
+ for (i = 0; i < values.length (); i++)
{
- histogram_value hist = VEC_index (histogram_value, values, i);
- switch (hist->type)
- {
- case HIST_TYPE_INTERVAL:
- t = GCOV_COUNTER_V_INTERVAL;
- break;
-
- case HIST_TYPE_POW2:
- t = GCOV_COUNTER_V_POW2;
- break;
-
- case HIST_TYPE_SINGLE_VALUE:
- t = GCOV_COUNTER_V_SINGLE;
- break;
+ histogram_value hist = values[i];
+ unsigned t = COUNTER_FOR_HIST_TYPE (hist->type);
- case HIST_TYPE_CONST_DELTA:
- t = GCOV_COUNTER_V_DELTA;
- break;
-
- case HIST_TYPE_INDIR_CALL:
- t = GCOV_COUNTER_V_INDIR;
- break;
-
- case HIST_TYPE_AVERAGE:
- t = GCOV_COUNTER_AVERAGE;
- break;
-
- case HIST_TYPE_IOR:
- t = GCOV_COUNTER_IOR;
- break;
-
- default:
- gcc_unreachable ();
- }
if (!coverage_counter_alloc (t, hist->n_counters))
continue;
break;
case HIST_TYPE_INDIR_CALL:
+ case HIST_TYPE_INDIR_CALL_TOPN:
gimple_gen_ic_profiler (hist, t, 0);
break;
gimple_gen_ior_profiler (hist, t, 0);
break;
+ case HIST_TYPE_TIME_PROFILE:
+ {
+ basic_block bb =
+ split_edge (single_succ_edge (ENTRY_BLOCK_PTR_FOR_FN (cfun)));
+ gimple_stmt_iterator gsi = gsi_start_bb (bb);
+
+ gimple_gen_time_profiler (t, 0, gsi);
+ break;
+ }
+
default:
gcc_unreachable ();
}
}
\f
+/* Fill the working set information into the profile_info structure. */
+
+void
+get_working_sets (void)
+{
+ unsigned ws_ix, pctinc, pct;
+ gcov_working_set_t *ws_info;
+
+ if (!profile_info)
+ return;
+
+ compute_working_sets (profile_info, gcov_working_sets);
+
+ if (dump_file)
+ {
+ fprintf (dump_file, "Counter working sets:\n");
+ /* Multiply the percentage by 100 to avoid float. */
+ pctinc = 100 * 100 / NUM_GCOV_WORKING_SETS;
+ for (ws_ix = 0, pct = pctinc; ws_ix < NUM_GCOV_WORKING_SETS;
+ ws_ix++, pct += pctinc)
+ {
+ if (ws_ix == NUM_GCOV_WORKING_SETS - 1)
+ pct = 9990;
+ ws_info = &gcov_working_sets[ws_ix];
+ /* Print out the percentage using int arithmatic to avoid float. */
+ fprintf (dump_file, "\t\t%u.%02u%%: num counts=%u, min counter="
+ "%" PRId64 "\n",
+ pct / 100, pct - (pct / 100 * 100),
+ ws_info->num_counters,
+ (int64_t)ws_info->min_counter);
+ }
+ }
+}
+
+/* Given a the desired percentage of the full profile (sum_all from the
+ summary), multiplied by 10 to avoid float in PCT_TIMES_10, returns
+ the corresponding working set information. If an exact match for
+ the percentage isn't found, the closest value is used. */
+
+gcov_working_set_t *
+find_working_set (unsigned pct_times_10)
+{
+ unsigned i;
+ if (!profile_info)
+ return NULL;
+ gcc_assert (pct_times_10 <= 1000);
+ if (pct_times_10 >= 999)
+ return &gcov_working_sets[NUM_GCOV_WORKING_SETS - 1];
+ i = pct_times_10 * NUM_GCOV_WORKING_SETS / 1000;
+ if (!i)
+ return &gcov_working_sets[0];
+ return &gcov_working_sets[i - 1];
+}
+
/* Computes hybrid profile for all matching entries in da_file.
CFG_CHECKSUM is the precomputed checksum for the CFG. */
gcov_type *counts;
/* Count the edges to be (possibly) instrumented. */
- FOR_BB_BETWEEN (bb, ENTRY_BLOCK_PTR, NULL, next_bb)
+ FOR_BB_BETWEEN (bb, ENTRY_BLOCK_PTR_FOR_FN (cfun), NULL, next_bb)
{
edge e;
edge_iterator ei;
if (!counts)
return NULL;
+ get_working_sets ();
+
if (dump_file && profile_info)
- fprintf(dump_file, "Merged %u profiles with maximal count %u.\n",
- profile_info->runs, (unsigned) profile_info->sum_max);
+ fprintf (dump_file, "Merged %u profiles with maximal count %u.\n",
+ profile_info->runs, (unsigned) profile_info->sum_max);
return counts;
}
static bool
-is_edge_inconsistent (VEC(edge,gc) *edges)
+is_edge_inconsistent (vec<edge, va_gc> *edges)
{
edge e;
edge_iterator ei;
if (dump_file)
{
fprintf (dump_file,
- "Edge %i->%i is inconsistent, count"HOST_WIDEST_INT_PRINT_DEC,
+ "Edge %i->%i is inconsistent, count%" PRId64,
e->src->index, e->dest->index, e->count);
- dump_bb (e->src, dump_file, 0);
- dump_bb (e->dest, dump_file, 0);
+ dump_bb (dump_file, e->src, 0, TDF_DETAILS);
+ dump_bb (dump_file, e->dest, 0, TDF_DETAILS);
}
return true;
}
edge e;
edge_iterator ei;
- FOR_BB_BETWEEN (bb, ENTRY_BLOCK_PTR, NULL, next_bb)
+ FOR_BB_BETWEEN (bb, ENTRY_BLOCK_PTR_FOR_FN (cfun), NULL, next_bb)
{
FOR_EACH_EDGE (e, ei, bb->succs)
{
{
basic_block bb;
bool inconsistent = false;
- FOR_EACH_BB (bb)
+ FOR_EACH_BB_FN (bb, cfun)
{
inconsistent |= is_edge_inconsistent (bb->preds);
if (!dump_file && inconsistent)
if (dump_file)
{
fprintf (dump_file, "BB %i count is negative "
- HOST_WIDEST_INT_PRINT_DEC,
+ "%" PRId64,
bb->index,
bb->count);
- dump_bb (bb, dump_file, 0);
+ dump_bb (dump_file, bb, 0, TDF_DETAILS);
}
inconsistent = true;
}
if (dump_file)
{
fprintf (dump_file, "BB %i count does not match sum of incoming edges "
- HOST_WIDEST_INT_PRINT_DEC" should be " HOST_WIDEST_INT_PRINT_DEC,
+ "%" PRId64" should be %" PRId64,
bb->index,
bb->count,
sum_edge_counts (bb->preds));
- dump_bb (bb, dump_file, 0);
+ dump_bb (dump_file, bb, 0, TDF_DETAILS);
}
inconsistent = true;
}
if (bb->count != sum_edge_counts (bb->succs) &&
- ! (find_edge (bb, EXIT_BLOCK_PTR) != NULL && block_ends_with_call_p (bb)))
+ ! (find_edge (bb, EXIT_BLOCK_PTR_FOR_FN (cfun)) != NULL
+ && block_ends_with_call_p (bb)))
{
if (dump_file)
{
fprintf (dump_file, "BB %i count does not match sum of outgoing edges "
- HOST_WIDEST_INT_PRINT_DEC" should be " HOST_WIDEST_INT_PRINT_DEC,
+ "%" PRId64" should be %" PRId64,
bb->index,
bb->count,
sum_edge_counts (bb->succs));
- dump_bb (bb, dump_file, 0);
+ dump_bb (dump_file, bb, 0, TDF_DETAILS);
}
inconsistent = true;
}
set_bb_counts (void)
{
basic_block bb;
- FOR_BB_BETWEEN (bb, ENTRY_BLOCK_PTR, NULL, next_bb)
+ FOR_BB_BETWEEN (bb, ENTRY_BLOCK_PTR_FOR_FN (cfun), NULL, next_bb)
{
bb->count = sum_edge_counts (bb->succs);
gcc_assert (bb->count >= 0);
/* The first count in the .da file is the number of times that the function
was entered. This is the exec_count for block zero. */
- FOR_BB_BETWEEN (bb, ENTRY_BLOCK_PTR, NULL, next_bb)
+ FOR_BB_BETWEEN (bb, ENTRY_BLOCK_PTR_FOR_FN (cfun), NULL, next_bb)
{
edge e;
edge_iterator ei;
if (flag_profile_correction)
{
static bool informed = 0;
- if (!informed)
- inform (input_location,
- "corrupted profile info: edge count exceeds maximal count");
+ if (dump_enabled_p () && !informed)
+ dump_printf_loc (MSG_NOTE, input_location,
+ "corrupted profile info: edge count"
+ " exceeds maximal count\n");
informed = 1;
}
else
{
fprintf (dump_file, "\nRead edge from %i to %i, count:",
bb->index, e->dest->index);
- fprintf (dump_file, HOST_WIDEST_INT_PRINT_DEC,
- (HOST_WIDEST_INT) e->count);
+ fprintf (dump_file, "%" PRId64,
+ (int64_t) e->count);
}
}
}
int overlap = 0;
basic_block bb;
- FOR_BB_BETWEEN (bb, ENTRY_BLOCK_PTR, NULL, next_bb)
+ FOR_BB_BETWEEN (bb, ENTRY_BLOCK_PTR_FOR_FN (cfun), NULL, next_bb)
{
count_total += bb->count;
freq_total += bb->frequency;
if (count_total == 0 || freq_total == 0)
return 0;
- FOR_BB_BETWEEN (bb, ENTRY_BLOCK_PTR, NULL, next_bb)
+ FOR_BB_BETWEEN (bb, ENTRY_BLOCK_PTR_FOR_FN (cfun), NULL, next_bb)
overlap += MIN (bb->count * OVERLAP_BASE / count_total,
bb->frequency * OVERLAP_BASE / freq_total);
/* Very simple sanity checks so we catch bugs in our profiling code. */
if (!profile_info)
return;
- if (profile_info->run_max * profile_info->runs < profile_info->sum_max)
- {
- error ("corrupted profile info: run_max * runs < sum_max");
- exec_counts = NULL;
- }
if (profile_info->sum_all < profile_info->sum_max)
{
}
/* Attach extra info block to each bb. */
- alloc_aux_for_blocks (sizeof (struct bb_info));
- FOR_BB_BETWEEN (bb, ENTRY_BLOCK_PTR, NULL, next_bb)
+ alloc_aux_for_blocks (sizeof (struct bb_profile_info));
+ FOR_BB_BETWEEN (bb, ENTRY_BLOCK_PTR_FOR_FN (cfun), NULL, next_bb)
{
edge e;
edge_iterator ei;
}
/* Avoid predicting entry on exit nodes. */
- BB_INFO (EXIT_BLOCK_PTR)->succ_count = 2;
- BB_INFO (ENTRY_BLOCK_PTR)->pred_count = 2;
+ BB_INFO (EXIT_BLOCK_PTR_FOR_FN (cfun))->succ_count = 2;
+ BB_INFO (ENTRY_BLOCK_PTR_FOR_FN (cfun))->pred_count = 2;
num_edges = read_profile_edge_counts (exec_counts);
{
passes++;
changes = 0;
- FOR_BB_BETWEEN (bb, EXIT_BLOCK_PTR, NULL, prev_bb)
+ FOR_BB_BETWEEN (bb, EXIT_BLOCK_PTR_FOR_FN (cfun), NULL, prev_bb)
{
- struct bb_info *bi = BB_INFO (bb);
+ struct bb_profile_info *bi = BB_INFO (bb);
if (! bi->count_valid)
{
if (bi->succ_count == 0)
/* If the graph has been correctly solved, every block will have a
succ and pred count of zero. */
- FOR_EACH_BB (bb)
+ FOR_EACH_BB_FN (bb, cfun)
{
gcc_assert (!BB_INFO (bb)->succ_count && !BB_INFO (bb)->pred_count);
}
{
/* Inconsistency detected. Make it flow-consistent. */
static int informed = 0;
- if (informed == 0)
+ if (dump_enabled_p () && informed == 0)
{
informed = 1;
- inform (input_location, "correcting inconsistent profile data");
+ dump_printf_loc (MSG_NOTE, input_location,
+ "correcting inconsistent profile data\n");
}
correct_negative_edge_counts ();
/* Set bb counts to the sum of the outgoing edge counts */
hist_br_prob[i] = 0;
num_branches = 0;
- FOR_BB_BETWEEN (bb, ENTRY_BLOCK_PTR, NULL, next_bb)
+ FOR_BB_BETWEEN (bb, ENTRY_BLOCK_PTR_FOR_FN (cfun), NULL, next_bb)
{
edge e;
edge_iterator ei;
already present. We get negative frequency from the entry
point. */
if ((e->count < 0
- && e->dest == EXIT_BLOCK_PTR)
+ && e->dest == EXIT_BLOCK_PTR_FOR_FN (cfun))
|| (e->count > bb->count
- && e->dest != EXIT_BLOCK_PTR))
+ && e->dest != EXIT_BLOCK_PTR_FOR_FN (cfun)))
{
if (block_ends_with_call_p (bb))
e->count = e->count < 0 ? 0 : bb->count;
if (bb->count)
{
FOR_EACH_EDGE (e, ei, bb->succs)
- e->probability = (e->count * REG_BR_PROB_BASE + bb->count / 2) / bb->count;
+ e->probability = GCOV_COMPUTE_SCALE (e->count, bb->count);
if (bb->index >= NUM_FIXED_BLOCKS
&& block_ends_with_condjump_p (bb)
&& EDGE_COUNT (bb->succs) >= 2)
give all abnormals frequency of 0, otherwise distribute the
frequency over abnormals (this is the case of noreturn
calls). */
- else if (profile_status == PROFILE_ABSENT)
+ else if (profile_status_for_fn (cfun) == PROFILE_ABSENT)
{
int total = 0;
}
}
counts_to_freqs ();
- profile_status = PROFILE_READ;
+ profile_status_for_fn (cfun) = PROFILE_READ;
compute_function_frequency ();
if (dump_file)
gcov_type *histogram_counts[GCOV_N_VALUE_COUNTERS];
gcov_type *act_count[GCOV_N_VALUE_COUNTERS];
gcov_type *aact_count;
+ struct cgraph_node *node;
for (t = 0; t < GCOV_N_VALUE_COUNTERS; t++)
n_histogram_counters[t] = 0;
- for (i = 0; i < VEC_length (histogram_value, values); i++)
+ for (i = 0; i < values.length (); i++)
{
- histogram_value hist = VEC_index (histogram_value, values, i);
+ histogram_value hist = values[i];
n_histogram_counters[(int) hist->type] += hist->n_counters;
}
if (!any)
return;
- for (i = 0; i < VEC_length (histogram_value, values); i++)
+ for (i = 0; i < values.length (); i++)
{
- histogram_value hist = VEC_index (histogram_value, values, i);
+ histogram_value hist = values[i];
gimple stmt = hist->hvalue.stmt;
t = (int) hist->type;
aact_count = act_count[t];
- act_count[t] += hist->n_counters;
+
+ if (act_count[t])
+ act_count[t] += hist->n_counters;
gimple_add_histogram_value (cfun, stmt, hist);
hist->hvalue.counters = XNEWVEC (gcov_type, hist->n_counters);
for (j = 0; j < hist->n_counters; j++)
- hist->hvalue.counters[j] = aact_count[j];
+ if (aact_count)
+ hist->hvalue.counters[j] = aact_count[j];
+ else
+ hist->hvalue.counters[j] = 0;
+
+ /* Time profiler counter is not related to any statement,
+ so that we have to read the counter and set the value to
+ the corresponding call graph node. */
+ if (hist->type == HIST_TYPE_TIME_PROFILE)
+ {
+ node = cgraph_node::get (hist->fun->decl);
+ node->tp_first_run = hist->hvalue.counters[0];
+
+ if (dump_file)
+ fprintf (dump_file, "Read tp_first_run: %d\n", node->tp_first_run);
+ }
}
for (t = 0; t < GCOV_N_VALUE_COUNTERS; t++)
free (histogram_counts[t]);
}
-/* The entry basic block will be moved around so that it has index=1,
- there is nothing at index 0 and the exit is at n_basic_block. */
-#define BB_TO_GCOV_INDEX(bb) ((bb)->index - 1)
/* When passed NULL as file_name, initialize.
When passed something else, output the necessary commands to change
line to LINE and offset to FILE_NAME. */
if (!*offset)
{
*offset = gcov_write_tag (GCOV_TAG_LINES);
- gcov_write_unsigned (BB_TO_GCOV_INDEX (bb));
+ gcov_write_unsigned (bb->index);
name_differs = line_differs=true;
}
}
}
-/* Instrument and/or analyze program behavior based on program flow graph.
- In either case, this function builds a flow graph for the function being
- compiled. The flow graph is stored in BB_GRAPH.
+/* Instrument and/or analyze program behavior based on program the CFG.
+
+ This function creates a representation of the control flow graph (of
+ the function being compiled) that is suitable for the instrumentation
+ of edges and/or converting measured edge counts to counts on the
+ complete CFG.
When FLAG_PROFILE_ARCS is nonzero, this function instruments the edges in
the flow graph that are needed to reconstruct the dynamic behavior of the
- flow graph.
+ flow graph. This data is written to the gcno file for gcov.
When FLAG_BRANCH_PROBABILITIES is nonzero, this function reads auxiliary
- information from a data file containing edge count information from previous
- executions of the function being compiled. In this case, the flow graph is
- annotated with actual execution counts, which are later propagated into the
- rtl for optimization purposes.
+ information from the gcda file containing edge count information from
+ previous executions of the function being compiled. In this case, the
+ control flow graph is annotated with actual execution counts by
+ compute_branch_probabilities().
Main entry point of this file. */
unsigned num_edges, ignored_edges;
unsigned num_instrumented;
struct edge_list *el;
- histogram_values values = NULL;
+ histogram_values values = histogram_values ();
unsigned cfg_checksum, lineno_checksum;
total_num_times_called++;
We also add fake exit edges for each call and asm statement in the
basic, since it may not return. */
- FOR_EACH_BB (bb)
+ FOR_EACH_BB_FN (bb, cfun)
{
int need_exit_edge = 0, need_entry_edge = 0;
int have_exit_edge = 0, have_entry_edge = 0;
is not computed twice. */
if (last
&& gimple_has_location (last)
- && e->goto_locus != UNKNOWN_LOCATION
+ && LOCATION_LOCUS (e->goto_locus) != UNKNOWN_LOCATION
&& !single_succ_p (bb)
&& (LOCATION_FILE (e->goto_locus)
!= LOCATION_FILE (gimple_location (last))
basic_block new_bb = split_edge (e);
edge ne = single_succ_edge (new_bb);
ne->goto_locus = e->goto_locus;
- ne->goto_block = e->goto_block;
}
if ((e->flags & (EDGE_ABNORMAL | EDGE_ABNORMAL_CALL))
- && e->dest != EXIT_BLOCK_PTR)
+ && e->dest != EXIT_BLOCK_PTR_FOR_FN (cfun))
need_exit_edge = 1;
- if (e->dest == EXIT_BLOCK_PTR)
+ if (e->dest == EXIT_BLOCK_PTR_FOR_FN (cfun))
have_exit_edge = 1;
}
FOR_EACH_EDGE (e, ei, bb->preds)
{
if ((e->flags & (EDGE_ABNORMAL | EDGE_ABNORMAL_CALL))
- && e->src != ENTRY_BLOCK_PTR)
+ && e->src != ENTRY_BLOCK_PTR_FOR_FN (cfun))
need_entry_edge = 1;
- if (e->src == ENTRY_BLOCK_PTR)
+ if (e->src == ENTRY_BLOCK_PTR_FOR_FN (cfun))
have_entry_edge = 1;
}
if (dump_file)
fprintf (dump_file, "Adding fake exit edge to bb %i\n",
bb->index);
- make_edge (bb, EXIT_BLOCK_PTR, EDGE_FAKE);
+ make_edge (bb, EXIT_BLOCK_PTR_FOR_FN (cfun), EDGE_FAKE);
}
if (need_entry_edge && !have_entry_edge)
{
if (dump_file)
fprintf (dump_file, "Adding fake entry edge to bb %i\n",
bb->index);
- make_edge (ENTRY_BLOCK_PTR, bb, EDGE_FAKE);
+ make_edge (ENTRY_BLOCK_PTR_FOR_FN (cfun), bb, EDGE_FAKE);
/* Avoid bbs that have both fake entry edge and also some
exit edge. One of those edges wouldn't be added to the
spanning tree, but we can't instrument any of them. */
{
gimple_stmt_iterator gsi;
gimple first;
- tree fndecl;
- gsi = gsi_after_labels (bb);
+ gsi = gsi_start_nondebug_after_labels_bb (bb);
gcc_checking_assert (!gsi_end_p (gsi));
first = gsi_stmt (gsi);
- if (is_gimple_debug (first))
- {
- gsi_next_nondebug (&gsi);
- gcc_checking_assert (!gsi_end_p (gsi));
- first = gsi_stmt (gsi);
- }
/* Don't split the bbs containing __builtin_setjmp_receiver
- or __builtin_setjmp_dispatcher calls. These are very
+ or ABNORMAL_DISPATCHER calls. These are very
special and don't expect anything to be inserted before
them. */
- if (!is_gimple_call (first)
- || (fndecl = gimple_call_fndecl (first)) == NULL
- || DECL_BUILT_IN_CLASS (fndecl) != BUILT_IN_NORMAL
- || (DECL_FUNCTION_CODE (fndecl) != BUILT_IN_SETJMP_RECEIVER
- && (DECL_FUNCTION_CODE (fndecl)
- != BUILT_IN_SETJMP_DISPATCHER)))
- {
- if (dump_file)
- fprintf (dump_file, "Splitting bb %i after labels\n",
- bb->index);
- split_block_after_labels (bb);
- }
+ if (is_gimple_call (first)
+ && (gimple_call_builtin_p (first, BUILT_IN_SETJMP_RECEIVER)
+ || (gimple_call_flags (first) & ECF_RETURNS_TWICE)
+ || (gimple_call_internal_p (first)
+ && (gimple_call_internal_fn (first)
+ == IFN_ABNORMAL_DISPATCHER))))
+ continue;
+
+ if (dump_file)
+ fprintf (dump_file, "Splitting bb %i after labels\n",
+ bb->index);
+ split_block_after_labels (bb);
}
}
}
el = create_edge_list ();
num_edges = NUM_EDGES (el);
- alloc_aux_for_edges (sizeof (struct edge_info));
+ alloc_aux_for_edges (sizeof (struct edge_profile_info));
/* The basic blocks are expected to be numbered sequentially. */
compact_blocks ();
/* Mark edges we've replaced by fake edges above as ignored. */
if ((e->flags & (EDGE_ABNORMAL | EDGE_ABNORMAL_CALL))
- && e->src != ENTRY_BLOCK_PTR && e->dest != EXIT_BLOCK_PTR)
+ && e->src != ENTRY_BLOCK_PTR_FOR_FN (cfun)
+ && e->dest != EXIT_BLOCK_PTR_FOR_FN (cfun))
{
EDGE_INFO (e)->ignore = 1;
ignored_edges++;
for (num_instrumented = i = 0; i < num_edges; i++)
{
edge e = INDEX_EDGE (el, i);
- struct edge_info *inf = EDGE_INFO (e);
+ struct edge_profile_info *inf = EDGE_INFO (e);
if (inf->ignore || inf->on_tree)
/*NOP*/;
num_instrumented++;
}
- total_num_blocks += n_basic_blocks;
+ total_num_blocks += n_basic_blocks_for_fn (cfun);
if (dump_file)
- fprintf (dump_file, "%d basic blocks\n", n_basic_blocks);
+ fprintf (dump_file, "%d basic blocks\n", n_basic_blocks_for_fn (cfun));
total_num_edges += num_edges;
if (dump_file)
if (dump_file)
fprintf (dump_file, "%d ignored edges\n", ignored_edges);
+ total_num_edges_instrumented += num_instrumented;
+ if (dump_file)
+ fprintf (dump_file, "%d instrumentation edges\n", num_instrumented);
/* Compute two different checksums. Note that we want to compute
the checksum in only once place, since it depends on the shape
of the control flow which can change during
various transformations. */
- cfg_checksum = coverage_compute_cfg_checksum ();
+ cfg_checksum = coverage_compute_cfg_checksum (cfun);
lineno_checksum = coverage_compute_lineno_checksum ();
/* Write the data from which gcov can reconstruct the basic block
- graph and function line numbers */
-
+ graph and function line numbers (the gcno file). */
if (coverage_begin_function (lineno_checksum, cfg_checksum))
{
gcov_position_t offset;
/* Basic block flags */
offset = gcov_write_tag (GCOV_TAG_BLOCKS);
- for (i = 0; i != (unsigned) (n_basic_blocks); i++)
+ for (i = 0; i != (unsigned) (n_basic_blocks_for_fn (cfun)); i++)
gcov_write_unsigned (0);
gcov_write_length (offset);
- /* Keep all basic block indexes nonnegative in the gcov output.
- Index 0 is used for entry block, last index is for exit
- block. */
- ENTRY_BLOCK_PTR->index = 1;
- EXIT_BLOCK_PTR->index = last_basic_block;
-
/* Arcs */
- FOR_BB_BETWEEN (bb, ENTRY_BLOCK_PTR, EXIT_BLOCK_PTR, next_bb)
+ FOR_BB_BETWEEN (bb, ENTRY_BLOCK_PTR_FOR_FN (cfun),
+ EXIT_BLOCK_PTR_FOR_FN (cfun), next_bb)
{
edge e;
edge_iterator ei;
offset = gcov_write_tag (GCOV_TAG_ARCS);
- gcov_write_unsigned (BB_TO_GCOV_INDEX (bb));
+ gcov_write_unsigned (bb->index);
FOR_EACH_EDGE (e, ei, bb->succs)
{
- struct edge_info *i = EDGE_INFO (e);
+ struct edge_profile_info *i = EDGE_INFO (e);
if (!i->ignore)
{
unsigned flag_bits = 0;
&& e->src->next_bb == e->dest)
flag_bits |= GCOV_ARC_FALLTHROUGH;
- gcov_write_unsigned (BB_TO_GCOV_INDEX (e->dest));
+ gcov_write_unsigned (e->dest->index);
gcov_write_unsigned (flag_bits);
}
}
gcov_write_length (offset);
}
- ENTRY_BLOCK_PTR->index = ENTRY_BLOCK;
- EXIT_BLOCK_PTR->index = EXIT_BLOCK;
-
/* Line numbers. */
/* Initialize the output. */
output_location (NULL, 0, NULL, NULL);
- FOR_EACH_BB (bb)
+ FOR_EACH_BB_FN (bb, cfun)
{
gimple_stmt_iterator gsi;
gcov_position_t offset = 0;
- if (bb == ENTRY_BLOCK_PTR->next_bb)
+ if (bb == ENTRY_BLOCK_PTR_FOR_FN (cfun)->next_bb)
{
expanded_location curr_location =
expand_location (DECL_SOURCE_LOCATION (current_function_decl));
/* Notice GOTO expressions eliminated while constructing the CFG. */
if (single_succ_p (bb)
- && single_succ_edge (bb)->goto_locus != UNKNOWN_LOCATION)
+ && LOCATION_LOCUS (single_succ_edge (bb)->goto_locus)
+ != UNKNOWN_LOCATION)
{
expanded_location curr_location
= expand_location (single_succ_edge (bb)->goto_locus);
}
}
-#undef BB_TO_GCOV_INDEX
-
if (flag_profile_values)
gimple_find_values_to_profile (&values);
free_aux_for_edges ();
- VEC_free (histogram_value, heap, values);
+ values.release ();
free_edge_list (el);
coverage_end_function (lineno_checksum, cfg_checksum);
}
basic_block bb;
/* We use aux field for standard union-find algorithm. */
- FOR_BB_BETWEEN (bb, ENTRY_BLOCK_PTR, NULL, next_bb)
+ FOR_BB_BETWEEN (bb, ENTRY_BLOCK_PTR_FOR_FN (cfun), NULL, next_bb)
bb->aux = bb;
/* Add fake edge exit to entry we can't instrument. */
- union_groups (EXIT_BLOCK_PTR, ENTRY_BLOCK_PTR);
+ union_groups (EXIT_BLOCK_PTR_FOR_FN (cfun), ENTRY_BLOCK_PTR_FOR_FN (cfun));
/* First add all abnormal edges to the tree unless they form a cycle. Also
- add all edges to EXIT_BLOCK_PTR to avoid inserting profiling code behind
+ add all edges to the exit block to avoid inserting profiling code behind
setting return value from function. */
for (i = 0; i < num_edges; i++)
{
edge e = INDEX_EDGE (el, i);
if (((e->flags & (EDGE_ABNORMAL | EDGE_ABNORMAL_CALL | EDGE_FAKE))
- || e->dest == EXIT_BLOCK_PTR)
+ || e->dest == EXIT_BLOCK_PTR_FOR_FN (cfun))
&& !EDGE_INFO (e)->ignore
&& (find_group (e->src) != find_group (e->dest)))
{
}
}
- FOR_BB_BETWEEN (bb, ENTRY_BLOCK_PTR, NULL, next_bb)
- bb->aux = NULL;
+ clear_aux_for_blocks ();
}
\f
/* Perform file-level initialization for branch-prob processing. */