/* Communication between reload.c, reload1.c and the rest of compiler.
- Copyright (C) 1987, 1991, 1992, 1993, 1994, 1995, 1997, 1998, 1999,
- 2000, 2001, 2003, 2004, 2007, 2008, 2010
- Free Software Foundation, Inc.
+ Copyright (C) 1987-2015 Free Software Foundation, Inc.
This file is part of GCC.
along with GCC; see the file COPYING3. If not see
<http://www.gnu.org/licenses/>. */
+#ifndef GCC_RELOAD_H
+#define GCC_RELOAD_H
/* If secondary reloads are the same for inputs and outputs, define those
macros here. */
SECONDARY_RELOAD_CLASS (CLASS, MODE, X)
#endif
-extern int memory_move_cost (enum machine_mode, enum reg_class, bool);
-extern int memory_move_secondary_cost (enum machine_mode, enum reg_class,
- bool);
+extern int register_move_cost (machine_mode, reg_class_t, reg_class_t);
+extern int memory_move_cost (machine_mode, reg_class_t, bool);
+extern int memory_move_secondary_cost (machine_mode, reg_class_t, bool);
/* Maximum number of reloads we can need. */
#define MAX_RELOADS (2 * MAX_RECOG_OPERANDS * (MAX_REGS_PER_ADDRESS + 1))
enum reg_class rclass;
/* The mode this operand should have when reloaded, on input. */
- enum machine_mode inmode;
+ machine_mode inmode;
/* The mode this operand should have when reloaded, on output. */
- enum machine_mode outmode;
+ machine_mode outmode;
/* The mode of the reload register. */
- enum machine_mode mode;
+ machine_mode mode;
/* the largest number of registers this reload will require. */
unsigned int nregs;
extern int n_reloads;
#endif
-extern GTY (()) VEC(rtx,gc) *reg_equiv_memory_loc_vec;
-extern rtx *reg_equiv_constant;
-extern rtx *reg_equiv_invariant;
-extern rtx *reg_equiv_memory_loc;
-extern rtx *reg_equiv_address;
-extern rtx *reg_equiv_mem;
-extern rtx *reg_equiv_alt_mem_list;
+/* Target-dependent globals. */
+struct target_reload {
+ /* Nonzero if indirect addressing is supported when the innermost MEM is
+ of the form (MEM (SYMBOL_REF sym)). It is assumed that the level to
+ which these are valid is the same as spill_indirect_levels, above. */
+ bool x_indirect_symref_ok;
+
+ /* Nonzero if an address (plus (reg frame_pointer) (reg ...)) is valid. */
+ bool x_double_reg_address_ok;
+
+ /* Nonzero if indirect addressing is supported on the machine; this means
+ that spilling (REG n) does not require reloading it into a register in
+ order to do (MEM (REG n)) or (MEM (PLUS (REG n) (CONST_INT c))). The
+ value indicates the level of indirect addressing supported, e.g., two
+ means that (MEM (MEM (REG n))) is also valid if (REG n) does not get
+ a hard register. */
+ unsigned char x_spill_indirect_levels;
+
+ /* True if caller-save has been reinitialized. */
+ bool x_caller_save_initialized_p;
+
+ /* Modes for each hard register that we can save. The smallest mode is wide
+ enough to save the entire contents of the register. When saving the
+ register because it is live we first try to save in multi-register modes.
+ If that is not possible the save is done one register at a time. */
+ machine_mode (x_regno_save_mode
+ [FIRST_PSEUDO_REGISTER]
+ [MAX_MOVE_MAX / MIN_UNITS_PER_WORD + 1]);
+
+ /* We will only make a register eligible for caller-save if it can be
+ saved in its widest mode with a simple SET insn as long as the memory
+ address is valid. We record the INSN_CODE is those insns here since
+ when we emit them, the addresses might not be valid, so they might not
+ be recognized. */
+ int x_cached_reg_save_code[FIRST_PSEUDO_REGISTER][MAX_MACHINE_MODE];
+ int x_cached_reg_restore_code[FIRST_PSEUDO_REGISTER][MAX_MACHINE_MODE];
+};
-/* Element N is the list of insns that initialized reg N from its equivalent
- constant or memory slot. */
-extern GTY((length("reg_equiv_init_size"))) rtx *reg_equiv_init;
+extern struct target_reload default_target_reload;
+#if SWITCHABLE_TARGET
+extern struct target_reload *this_target_reload;
+#else
+#define this_target_reload (&default_target_reload)
+#endif
-/* The size of the previous array, for GC purposes. */
-extern GTY(()) int reg_equiv_init_size;
+#define indirect_symref_ok \
+ (this_target_reload->x_indirect_symref_ok)
+#define double_reg_address_ok \
+ (this_target_reload->x_double_reg_address_ok)
+#define caller_save_initialized_p \
+ (this_target_reload->x_caller_save_initialized_p)
+
+/* Register equivalences. Indexed by register number. */
+struct reg_equivs_t
+{
+ /* The constant value to which pseudo reg N is equivalent,
+ or zero if pseudo reg N is not equivalent to a constant.
+ find_reloads looks at this in order to replace pseudo reg N
+ with the constant it stands for. */
+ rtx constant;
+
+ /* An invariant value to which pseudo reg N is equivalent.
+ eliminate_regs_in_insn uses this to replace pseudos in particular
+ contexts. */
+ rtx invariant;
+
+ /* A memory location to which pseudo reg N is equivalent,
+ prior to any register elimination (such as frame pointer to stack
+ pointer). Depending on whether or not it is a valid address, this value
+ is transferred to either equiv_address or equiv_mem. */
+ rtx memory_loc;
+
+ /* The address of stack slot to which pseudo reg N is equivalent.
+ This is used when the address is not valid as a memory address
+ (because its displacement is too big for the machine.) */
+ rtx address;
+
+ /* The memory slot to which pseudo reg N is equivalent,
+ or zero if pseudo reg N is not equivalent to a memory slot. */
+ rtx mem;
+
+ /* An EXPR_LIST of REG_EQUIVs containing MEMs with
+ alternate representations of the location of pseudo reg N. */
+ rtx_expr_list *alt_mem_list;
+
+ /* The list of insns that initialized reg N from its equivalent
+ constant or memory slot. */
+ rtx_insn_list *init;
+};
+
+#define reg_equiv_constant(ELT) \
+ (*reg_equivs)[(ELT)].constant
+#define reg_equiv_invariant(ELT) \
+ (*reg_equivs)[(ELT)].invariant
+#define reg_equiv_memory_loc(ELT) \
+ (*reg_equivs)[(ELT)].memory_loc
+#define reg_equiv_address(ELT) \
+ (*reg_equivs)[(ELT)].address
+#define reg_equiv_mem(ELT) \
+ (*reg_equivs)[(ELT)].mem
+#define reg_equiv_alt_mem_list(ELT) \
+ (*reg_equivs)[(ELT)].alt_mem_list
+#define reg_equiv_init(ELT) \
+ (*reg_equivs)[(ELT)].init
+
+extern vec<reg_equivs_t, va_gc> *reg_equivs;
/* All the "earlyclobber" operands of the current insn
are recorded here. */
Used in find_equiv_reg. */
extern int reload_first_uid;
-/* Nonzero if indirect addressing is supported when the innermost MEM is
- of the form (MEM (SYMBOL_REF sym)). It is assumed that the level to
- which these are valid is the same as spill_indirect_levels, above. */
-
-extern char indirect_symref_ok;
-
-/* Nonzero if an address (plus (reg frame_pointer) (reg ...)) is valid. */
-extern char double_reg_address_ok;
-
extern int num_not_at_initial_offset;
#if defined SET_HARD_REG_BIT && defined CLEAR_REG_SET
struct insn_chain *next_need_reload;
/* The rtx of the insn. */
- rtx insn;
+ rtx_insn *insn;
/* The basic block this insn is in. */
int block;
/* Functions from reload.c: */
-extern enum reg_class secondary_reload_class (bool, enum reg_class,
- enum machine_mode, rtx);
+extern reg_class_t secondary_reload_class (bool, reg_class_t,
+ machine_mode, rtx);
#ifdef GCC_INSN_CODES_H
extern enum reg_class scratch_reload_class (enum insn_code);
/* Return a memory location that will be used to copy X in mode MODE.
If we haven't already made a location for this mode in this insn,
call find_reloads_address on the location being returned. */
-extern rtx get_secondary_mem (rtx, enum machine_mode, int, enum reload_type);
+extern rtx get_secondary_mem (rtx, machine_mode, int, enum reload_type);
/* Clear any secondary memory locations we've made. */
extern void clear_secondary_mem (void);
/* Search the body of INSN for values that need reloading and record them
with push_reload. REPLACE nonzero means record also where the values occur
so that subst_reloads can be used. */
-extern int find_reloads (rtx, int, int, int, short *);
+extern int find_reloads (rtx_insn *, int, int, int, short *);
/* Compute the sum of X and Y, making canonicalizations assumed in an
address, namely: sum constant integers, surround the sum of two
constants with a CONST, put the constant as the second operand, and
group the constant on the outermost sum. */
-extern rtx form_sum (enum machine_mode, rtx, rtx);
+extern rtx form_sum (machine_mode, rtx, rtx);
/* Substitute into the current INSN the registers into which we have reloaded
the things that need reloading. */
-extern void subst_reloads (rtx);
+extern void subst_reloads (rtx_insn *);
/* Make a copy of any replacements being done into X and move those copies
to locations in Y, a copy of X. We only look at the highest level of
/* Check the insns before INSN to see if there is a suitable register
containing the same value as GOAL. */
-extern rtx find_equiv_reg (rtx, rtx, enum reg_class, int, short *,
- int, enum machine_mode);
+extern rtx find_equiv_reg (rtx, rtx_insn *, enum reg_class, int, short *,
+ int, machine_mode);
/* Return 1 if register REGNO is the subject of a clobber in insn INSN. */
-extern int regno_clobbered_p (unsigned int, rtx, enum machine_mode, int);
+extern int regno_clobbered_p (unsigned int, rtx_insn *, machine_mode, int);
/* Return 1 if X is an operand of an insn that is being earlyclobbered. */
extern int earlyclobber_operand_p (rtx);
/* Record one reload that needs to be performed. */
extern int push_reload (rtx, rtx, rtx *, rtx *, enum reg_class,
- enum machine_mode, enum machine_mode,
+ machine_mode, machine_mode,
int, int, int, enum reload_type);
-/* Functions in postreload.c: */
-extern void reload_cse_regs (rtx);
-
/* Functions in reload1.c: */
/* Initialize the reload pass once per compilation. */
extern void init_reload (void);
/* The reload pass itself. */
-extern int reload (rtx, int);
+extern bool reload (rtx_insn *, int);
/* Mark the slots in regs_ever_live for the hard regs
used by pseudo-reg number REGNO. */
/* Scan X and replace any eliminable registers (such as fp) with a
replacement (such as sp), plus an offset. */
-extern rtx eliminate_regs (rtx, enum machine_mode, rtx);
+extern rtx eliminate_regs (rtx, machine_mode, rtx);
extern bool elimination_target_reg_p (rtx);
/* Called from the register allocator to estimate costs of eliminating
/* Deallocate the reload register used by reload number R. */
extern void deallocate_reload_reg (int r);
-/* True if caller-save has been reinitialized. */
-extern bool caller_save_initialized_p;
-
/* Functions in caller-save.c: */
/* Initialize for caller-save. */
extern void save_call_clobbered_regs (void);
/* Replace (subreg (reg)) with the appropriate (reg) for any operands. */
-extern void cleanup_subreg_operands (rtx);
+extern void cleanup_subreg_operands (rtx_insn *);
/* Debugging support. */
extern void debug_reload_to_stream (FILE *);
/* Compute the actual register we should reload to, in case we're
reloading to/from a register that is wider than a word. */
-extern rtx reload_adjust_reg_for_mode (rtx, enum machine_mode);
+extern rtx reload_adjust_reg_for_mode (rtx, machine_mode);
+
+/* Allocate or grow the reg_equiv tables, initializing new entries to 0. */
+extern void grow_reg_equivs (void);
+
+#endif /* GCC_RELOAD_H */