/* Instruction scheduling pass. This file contains definitions used
internally in the scheduler.
- Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998,
- 1999, 2000, 2001, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+ Copyright (C) 1992-2015 Free Software Foundation, Inc.
This file is part of GCC.
GCC is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free
-Software Foundation; either version 2, or (at your option) any later
+Software Foundation; either version 3, or (at your option) any later
version.
GCC is distributed in the hope that it will be useful, but WITHOUT ANY
for more details.
You should have received a copy of the GNU General Public License
-along with GCC; see the file COPYING. If not, write to the Free
-Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
-02110-1301, USA. */
+along with GCC; see the file COPYING3. If not see
+<http://www.gnu.org/licenses/>. */
#ifndef GCC_SCHED_INT_H
#define GCC_SCHED_INT_H
-/* For state_t. */
#include "insn-attr.h"
-/* For regset_head. */
-#include "basic-block.h"
-/* For reg_note. */
-#include "rtl.h"
+
+#ifdef INSN_SCHEDULING
+
+#include "df.h"
+
+/* Identificator of a scheduler pass. */
+enum sched_pass_id_t { SCHED_PASS_UNKNOWN, SCHED_RGN_PASS, SCHED_EBB_PASS,
+ SCHED_SMS_PASS, SCHED_SEL_PASS };
+
+/* The algorithm used to implement -fsched-pressure. */
+enum sched_pressure_algorithm
+{
+ SCHED_PRESSURE_NONE,
+ SCHED_PRESSURE_WEIGHTED,
+ SCHED_PRESSURE_MODEL
+};
+
+typedef vec<basic_block> bb_vec_t;
+typedef vec<rtx_insn *> insn_vec_t;
+typedef vec<rtx_insn *> rtx_vec_t;
+
+extern void sched_init_bbs (void);
+
+extern void sched_extend_luids (void);
+extern void sched_init_insn_luid (rtx_insn *);
+extern void sched_init_luids (bb_vec_t);
+extern void sched_finish_luids (void);
+
+extern void sched_extend_target (void);
+
+extern void haifa_init_h_i_d (bb_vec_t);
+extern void haifa_finish_h_i_d (void);
+
+/* Hooks that are common to all the schedulers. */
+struct common_sched_info_def
+{
+ /* Called after blocks were rearranged due to movement of jump instruction.
+ The first parameter - index of basic block, in which jump currently is.
+ The second parameter - index of basic block, in which jump used
+ to be.
+ The third parameter - index of basic block, that follows the second
+ parameter. */
+ void (*fix_recovery_cfg) (int, int, int);
+
+ /* Called to notify frontend, that new basic block is being added.
+ The first parameter - new basic block.
+ The second parameter - block, after which new basic block is being added,
+ or the exit block, if recovery block is being added,
+ or NULL, if standalone block is being added. */
+ void (*add_block) (basic_block, basic_block);
+
+ /* Estimate number of insns in the basic block. */
+ int (*estimate_number_of_insns) (basic_block);
+
+ /* Given a non-insn (!INSN_P (x)) return
+ -1 - if this rtx don't need a luid.
+ 0 - if it should have the same luid as the previous insn.
+ 1 - if it needs a separate luid. */
+ int (*luid_for_non_insn) (rtx);
+
+ /* Scheduler pass identifier. It is preferably used in assertions. */
+ enum sched_pass_id_t sched_pass_id;
+};
+
+extern struct common_sched_info_def *common_sched_info;
+
+extern const struct common_sched_info_def haifa_common_sched_info;
+
+/* Return true if selective scheduling pass is working. */
+static inline bool
+sel_sched_p (void)
+{
+ return common_sched_info->sched_pass_id == SCHED_SEL_PASS;
+}
+
+/* Returns maximum priority that an insn was assigned to. */
+extern int get_rgn_sched_max_insns_priority (void);
+
+/* Increases effective priority for INSN by AMOUNT. */
+extern void sel_add_to_insn_priority (rtx, int);
+
+/* True if during selective scheduling we need to emulate some of haifa
+ scheduler behaviour. */
+extern int sched_emulate_haifa_p;
+
+/* Mapping from INSN_UID to INSN_LUID. In the end all other per insn data
+ structures should be indexed by luid. */
+extern vec<int> sched_luids;
+#define INSN_LUID(INSN) (sched_luids[INSN_UID (INSN)])
+#define LUID_BY_UID(UID) (sched_luids[UID])
+
+#define SET_INSN_LUID(INSN, LUID) \
+(sched_luids[INSN_UID (INSN)] = (LUID))
+
+/* The highest INSN_LUID. */
+extern int sched_max_luid;
+
+extern int insn_luid (rtx);
+
+/* This list holds ripped off notes from the current block. These notes will
+ be attached to the beginning of the block when its scheduling is
+ finished. */
+extern rtx_insn *note_list;
+
+extern void remove_notes (rtx_insn *, rtx_insn *);
+extern rtx_insn *restore_other_notes (rtx_insn *, basic_block);
+extern void sched_insns_init (rtx);
+extern void sched_insns_finish (void);
+
+extern void *xrecalloc (void *, size_t, size_t, size_t);
+
+extern void reemit_notes (rtx_insn *);
+
+/* Functions in haifa-sched.c. */
+extern int haifa_classify_insn (const_rtx);
+
+/* Functions in sel-sched-ir.c. */
+extern void sel_find_rgns (void);
+extern void sel_mark_hard_insn (rtx);
+
+extern size_t dfa_state_size;
+
+extern void advance_state (state_t);
+
+extern void setup_sched_dump (void);
+extern void sched_init (void);
+extern void sched_finish (void);
+
+extern bool sel_insn_is_speculation_check (rtx);
+
+/* Describe the ready list of the scheduler.
+ VEC holds space enough for all insns in the current region. VECLEN
+ says how many exactly.
+ FIRST is the index of the element with the highest priority; i.e. the
+ last one in the ready list, since elements are ordered by ascending
+ priority.
+ N_READY determines how many insns are on the ready list.
+ N_DEBUG determines how many debug insns are on the ready list. */
+struct ready_list
+{
+ rtx_insn **vec;
+ int veclen;
+ int first;
+ int n_ready;
+ int n_debug;
+};
+
+extern signed char *ready_try;
+extern struct ready_list ready;
+
+extern int max_issue (struct ready_list *, int, state_t, bool, int *);
+
+extern void ebb_compute_jump_reg_dependencies (rtx, regset);
+
+extern edge find_fallthru_edge_from (basic_block);
+
+extern void (* sched_init_only_bb) (basic_block, basic_block);
+extern basic_block (* sched_split_block) (basic_block, rtx);
+extern basic_block sched_split_block_1 (basic_block, rtx);
+extern basic_block (* sched_create_empty_bb) (basic_block);
+extern basic_block sched_create_empty_bb_1 (basic_block);
+
+extern basic_block sched_create_recovery_block (basic_block *);
+extern void sched_create_recovery_edges (basic_block, basic_block,
+ basic_block);
/* Pointer to data describing the current DFA state. */
extern state_t curr_state;
-/* Forward declaration. */
-struct ready_list;
-
/* Type to represent status of a dependence. */
-typedef int ds_t;
+typedef unsigned int ds_t;
+#define BITS_PER_DEP_STATUS HOST_BITS_PER_INT
/* Type to represent weakness of speculative dependence. */
-typedef int dw_t;
+typedef unsigned int dw_t;
extern enum reg_note ds_to_dk (ds_t);
extern ds_t dk_to_ds (enum reg_note);
+/* Describe a dependency that can be broken by making a replacement
+ in one of the patterns. LOC is the location, ORIG and NEWVAL the
+ two alternative contents, and INSN the instruction that must be
+ changed. */
+struct dep_replacement
+{
+ rtx *loc;
+ rtx orig;
+ rtx newval;
+ rtx_insn *insn;
+};
+
/* Information about the dependency. */
struct _dep
{
/* Producer. */
- rtx pro;
+ rtx_insn *pro;
/* Consumer. */
- rtx con;
+ rtx_insn *con;
- /* Dependency kind (aka dependency major type). This field is superseded
- by STATUS below. Though, it is still in place because all the backends
- use it. */
- enum reg_note kind;
+ /* If nonnull, holds a pointer to information about how to break the
+ dependency by making a replacement in one of the insns. There is
+ only one such dependency for each insn that must be modified in
+ order to break such a dependency. */
+ struct dep_replacement *replace;
/* Dependency status. This field holds all dependency types and additional
information for speculative dependencies. */
ds_t status;
+
+ /* Dependency major type. This field is superseded by STATUS above.
+ Though, it is still in place because some targets use it. */
+ ENUM_BITFIELD(reg_note) type:6;
+
+ unsigned nonreg:1;
+ unsigned multiple:1;
+
+ /* Cached cost of the dependency. Make sure to update UNKNOWN_DEP_COST
+ when changing the size of this field. */
+ int cost:20;
};
-typedef struct _dep *dep_t;
+
+#define UNKNOWN_DEP_COST (-1<<19)
+
+typedef struct _dep dep_def;
+typedef dep_def *dep_t;
#define DEP_PRO(D) ((D)->pro)
#define DEP_CON(D) ((D)->con)
-#define DEP_KIND(D) ((D)->kind)
+#define DEP_TYPE(D) ((D)->type)
#define DEP_STATUS(D) ((D)->status)
+#define DEP_COST(D) ((D)->cost)
+#define DEP_NONREG(D) ((D)->nonreg)
+#define DEP_MULTIPLE(D) ((D)->multiple)
+#define DEP_REPLACE(D) ((D)->replace)
/* Functions to work with dep. */
-extern void init_dep (dep_t, rtx, rtx, enum reg_note);
+extern void init_dep_1 (dep_t, rtx_insn *, rtx_insn *, enum reg_note, ds_t);
+extern void init_dep (dep_t, rtx_insn *, rtx_insn *, enum reg_note);
+
+extern void sd_debug_dep (dep_t);
/* Definition of this struct resides below. */
struct _dep_node;
+typedef struct _dep_node *dep_node_t;
/* A link in the dependency list. This is essentially an equivalent of a
single {INSN, DEPS}_LIST rtx. */
struct _dep_link
{
/* Dep node with all the data. */
- struct _dep_node *node;
+ dep_node_t node;
/* Next link in the list. For the last one it is NULL. */
struct _dep_link *next;
#define DEP_LINK_DEP(N) (DEP_NODE_DEP (DEP_LINK_NODE (N)))
#define DEP_LINK_PRO(N) (DEP_PRO (DEP_LINK_DEP (N)))
#define DEP_LINK_CON(N) (DEP_CON (DEP_LINK_DEP (N)))
-#define DEP_LINK_KIND(N) (DEP_KIND (DEP_LINK_DEP (N)))
+#define DEP_LINK_TYPE(N) (DEP_TYPE (DEP_LINK_DEP (N)))
#define DEP_LINK_STATUS(N) (DEP_STATUS (DEP_LINK_DEP (N)))
-void debug_dep_links (dep_link_t);
-
-/* A list of dep_links. Lists of this type are now used instead of rtx
- LOG_LINKS and alike lists. */
+/* A list of dep_links. */
struct _deps_list
{
+ /* First element. */
dep_link_t first;
+
+ /* Total number of elements in the list. */
+ int n_links;
};
typedef struct _deps_list *deps_list_t;
#define DEPS_LIST_FIRST(L) ((L)->first)
-
-/* Macro to walk through deps_list. */
-#define FOR_EACH_DEP_LINK(LINK, LIST) \
- for ((LINK) = DEPS_LIST_FIRST (LIST); \
- (LINK) != NULL; \
- (LINK) = DEP_LINK_NEXT (LINK))
-
-/* Functions to work with deps_list. */
-
-deps_list_t create_deps_list (bool);
-void free_deps_list (deps_list_t);
-void delete_deps_list (deps_list_t);
-bool deps_list_empty_p (deps_list_t);
-void debug_deps_list (deps_list_t);
-void add_back_dep_to_deps_list (deps_list_t, dep_t);
-dep_link_t find_link_by_pro_in_deps_list (deps_list_t, rtx);
-dep_link_t find_link_by_con_in_deps_list (deps_list_t, rtx);
-void copy_deps_list_change_con (deps_list_t, deps_list_t, rtx);
-
-void move_dep_link (dep_link_t, deps_list_t);
+#define DEPS_LIST_N_LINKS(L) ((L)->n_links)
/* Suppose we have a dependence Y between insn pro1 and con1, where pro1 has
additional dependents con0 and con2, and con1 is dependent on additional
/* Forward link. */
struct _dep_link forw;
};
-typedef struct _dep_node *dep_node_t;
#define DEP_NODE_BACK(N) (&(N)->back)
#define DEP_NODE_DEP(N) (&(N)->dep)
#define DEP_NODE_FORW(N) (&(N)->forw)
+/* The following enumeration values tell us what dependencies we
+ should use to implement the barrier. We use true-dependencies for
+ TRUE_BARRIER and anti-dependencies for MOVE_BARRIER. */
+enum reg_pending_barrier_mode
+{
+ NOT_A_BARRIER = 0,
+ MOVE_BARRIER,
+ TRUE_BARRIER
+};
+
+/* Whether a register movement is associated with a call. */
+enum post_call_group
+{
+ not_post_call,
+ post_call,
+ post_call_initial
+};
+
+/* Insns which affect pseudo-registers. */
+struct deps_reg
+{
+ rtx_insn_list *uses;
+ rtx_insn_list *sets;
+ rtx_insn_list *implicit_sets;
+ rtx_insn_list *control_uses;
+ rtx_insn_list *clobbers;
+ int uses_length;
+ int clobbers_length;
+};
+
/* Describe state of dependencies used during sched_analyze phase. */
-struct deps
+struct deps_desc
{
/* The *_insns and *_mems are paired lists. Each pending memory operation
will have a pointer to the MEM rtx on one list and a pointer to the
to a list more than once. */
/* An INSN_LIST containing all insns with pending read operations. */
- rtx pending_read_insns;
+ rtx_insn_list *pending_read_insns;
/* An EXPR_LIST containing all MEM rtx's which are pending reads. */
- rtx pending_read_mems;
+ rtx_expr_list *pending_read_mems;
/* An INSN_LIST containing all insns with pending write operations. */
- rtx pending_write_insns;
+ rtx_insn_list *pending_write_insns;
/* An EXPR_LIST containing all MEM rtx's which are pending writes. */
- rtx pending_write_mems;
+ rtx_expr_list *pending_write_mems;
+
+ /* An INSN_LIST containing all jump insns. */
+ rtx_insn_list *pending_jump_insns;
- /* Indicates the combined length of the two pending lists. We must prevent
- these lists from ever growing too large since the number of dependencies
- produced is at least O(N*N), and execution time is at least O(4*N*N), as
- a function of the length of these pending lists. */
- int pending_lists_length;
+ /* We must prevent the above lists from ever growing too large since
+ the number of dependencies produced is at least O(N*N),
+ and execution time is at least O(4*N*N), as a function of the
+ length of these pending lists. */
- /* Length of the pending memory flush list. Large functions with no
- calls may build up extremely large lists. */
+ /* Indicates the length of the pending_read list. */
+ int pending_read_list_length;
+
+ /* Indicates the length of the pending_write list. */
+ int pending_write_list_length;
+
+ /* Length of the pending memory flush list plus the length of the pending
+ jump insn list. Large functions with no calls may build up extremely
+ large lists. */
int pending_flush_length;
/* The last insn upon which all memory references must depend.
alias analysis, this restriction can be relaxed.
This may also be an INSN that writes memory if the pending lists grow
too large. */
- rtx last_pending_memory_flush;
+ rtx_insn_list *last_pending_memory_flush;
/* A list of the last function calls we have seen. We use a list to
represent last function calls from multiple predecessor blocks.
Used to prevent register lifetimes from expanding unnecessarily. */
- rtx last_function_call;
+ rtx_insn_list *last_function_call;
+
+ /* A list of the last function calls that may not return normally
+ we have seen. We use a list to represent last function calls from
+ multiple predecessor blocks. Used to prevent moving trapping insns
+ across such calls. */
+ rtx_insn_list *last_function_call_may_noreturn;
/* A list of insns which use a pseudo register that does not already
cross a call. We create dependencies between each of those insn
and the next call insn, to ensure that they won't cross a call after
scheduling is done. */
- rtx sched_before_next_call;
+ rtx_insn_list *sched_before_next_call;
+
+ /* Similarly, a list of insns which should not cross a branch. */
+ rtx_insn_list *sched_before_next_jump;
/* Used to keep post-call pseudo/hard reg movements together with
the call. */
- enum { not_post_call, post_call, post_call_initial } in_post_call_group_p;
+ enum post_call_group in_post_call_group_p;
- /* Set to the tail insn of the outermost libcall block.
+ /* The last debug insn we've seen. */
+ rtx_insn *last_debug_insn;
- When nonzero, we will mark each insn processed by sched_analyze_insn
- with SCHED_GROUP_P to ensure libcalls are scheduled as a unit. */
- rtx libcall_block_tail_insn;
+ /* The last insn bearing REG_ARGS_SIZE that we've seen. */
+ rtx_insn *last_args_size;
/* The maximum register number for the following arrays. Before reload
this is max_reg_num; after reload it is FIRST_PSEUDO_REGISTER. */
N within the current basic block; or zero, if there is no
such insn. Needed for new registers which may be introduced
by splitting insns. */
- struct deps_reg
- {
- rtx uses;
- rtx sets;
- rtx clobbers;
- int uses_length;
- int clobbers_length;
- } *reg_last;
+ struct deps_reg *reg_last;
/* Element N is set for each register that has any nonzero element
in reg_last[N].{uses,sets,clobbers}. */
regset_head reg_last_in_use;
- /* Element N is set for each register that is conditionally set. */
- regset_head reg_conditional_sets;
+ /* Shows the last value of reg_pending_barrier associated with the insn. */
+ enum reg_pending_barrier_mode last_reg_pending_barrier;
+
+ /* True when this context should be treated as a readonly by
+ the analysis. */
+ BOOL_BITFIELD readonly : 1;
};
+typedef struct deps_desc *deps_t;
+
/* This structure holds some state of the current scheduling pass, and
contains some function pointers that abstract out some of the non-generic
functionality from functions such as schedule_block or schedule_insn.
There is one global variable, current_sched_info, which points to the
sched_info structure currently in use. */
-struct sched_info
+struct haifa_sched_info
{
/* Add all insns that are initially ready to the ready list. Called once
before scheduling a set of insns. */
void (*init_ready_list) (void);
/* Called after taking an insn from the ready list. Returns nonzero if
this insn can be scheduled, nonzero if we should silently discard it. */
- int (*can_schedule_ready_p) (rtx);
+ int (*can_schedule_ready_p) (rtx_insn *);
/* Return nonzero if there are more insns that should be scheduled. */
int (*schedule_more_p) (void);
- /* Called after an insn has all its hard dependencies resolved.
+ /* Called after an insn has all its hard dependencies resolved.
Adjusts status of instruction (which is passed through second parameter)
to indicate if instruction should be moved to the ready list or the
queue, or if it should silently discard it (until next resolved
dependence). */
- ds_t (*new_ready) (rtx, ds_t);
+ ds_t (*new_ready) (rtx_insn *, ds_t);
/* Compare priority of two insns. Return a positive number if the second
insn is to be preferred for scheduling, and a negative one if the first
is to be preferred. Zero if they are equally good. */
- int (*rank) (rtx, rtx);
+ int (*rank) (rtx_insn *, rtx_insn *);
/* Return a string that contains the insn uid and optionally anything else
necessary to identify this insn in an output. It's valid to use a
static buffer for this. The ALIGNED parameter should cause the string
to be formatted so that multiple output lines will line up nicely. */
- const char *(*print_insn) (rtx, int);
+ const char *(*print_insn) (const rtx_insn *, int);
/* Return nonzero if an insn should be included in priority
calculations. */
- int (*contributes_to_priority) (rtx, rtx);
- /* Called when computing dependencies for a JUMP_INSN. This function
- should store the set of registers that must be considered as set by
- the jump in the regset. */
- void (*compute_jump_reg_dependencies) (rtx, regset, regset, regset);
+ int (*contributes_to_priority) (rtx_insn *, rtx_insn *);
+
+ /* Return true if scheduling insn (passed as the parameter) will trigger
+ finish of scheduling current block. */
+ bool (*insn_finishes_block_p) (rtx_insn *);
/* The boundaries of the set of insns to be scheduled. */
- rtx prev_head, next_tail;
+ rtx_insn *prev_head, *next_tail;
/* Filled in after the schedule is finished; the first and last scheduled
insns. */
- rtx head, tail;
+ rtx_insn *head, *tail;
/* If nonzero, enables an additional sanity check in schedule_block. */
unsigned int queue_must_finish_empty:1;
- /* Nonzero if we should use cselib for better alias analysis. This
- must be 0 if the dependency information is used after sched_analyze
- has completed, e.g. if we're using it to initialize state for successor
- blocks in region scheduling. */
- unsigned int use_cselib:1;
/* Maximum priority that has been assigned to an insn. */
int sched_max_insns_priority;
/* Hooks to support speculative scheduling. */
/* Called to notify frontend that instruction is being added (second
- parameter == 0) or removed (second parameter == 1). */
- void (*add_remove_insn) (rtx, int);
+ parameter == 0) or removed (second parameter == 1). */
+ void (*add_remove_insn) (rtx_insn *, int);
- /* Called to notify frontend that instruction is being scheduled.
- The first parameter - instruction to scheduled, the second parameter -
- last scheduled instruction. */
- void (*begin_schedule_ready) (rtx, rtx);
+ /* Called to notify the frontend that instruction INSN is being
+ scheduled. */
+ void (*begin_schedule_ready) (rtx_insn *insn);
- /* Called to notify frontend, that new basic block is being added.
- The first parameter - new basic block.
- The second parameter - block, after which new basic block is being added,
- or EXIT_BLOCK_PTR, if recovery block is being added,
- or NULL, if standalone block is being added. */
- void (*add_block) (basic_block, basic_block);
+ /* Called to notify the frontend that an instruction INSN is about to be
+ moved to its correct place in the final schedule. This is done for all
+ insns in order of the schedule. LAST indicates the last scheduled
+ instruction. */
+ void (*begin_move_insn) (rtx_insn *insn, rtx_insn *last);
/* If the second parameter is not NULL, return nonnull value, if the
basic block should be advanced.
If the second parameter is NULL, return the next basic block in EBB.
The first parameter is the current basic block in EBB. */
- basic_block (*advance_target_bb) (basic_block, rtx);
-
- /* Called after blocks were rearranged due to movement of jump instruction.
- The first parameter - index of basic block, in which jump currently is.
- The second parameter - index of basic block, in which jump used
- to be.
- The third parameter - index of basic block, that follows the second
- parameter. */
- void (*fix_recovery_cfg) (int, int, int);
+ basic_block (*advance_target_bb) (basic_block, rtx_insn *);
-#ifdef ENABLE_CHECKING
- /* If the second parameter is zero, return nonzero, if block is head of the
- region.
- If the second parameter is nonzero, return nonzero, if block is leaf of
- the region.
- global_live_at_start should not change in region heads and
- global_live_at_end should not change in region leafs due to scheduling. */
- int (*region_head_or_leaf_p) (basic_block, int);
-#endif
+ /* Allocate memory, store the frontend scheduler state in it, and
+ return it. */
+ void *(*save_state) (void);
+ /* Restore frontend scheduler state from the argument, and free the
+ memory. */
+ void (*restore_state) (void *);
/* ??? FIXME: should use straight bitfields inside sched_info instead of
this flag field. */
/* Minimal cumulative weakness of speculative instruction's
dependencies, so that insn will be scheduled. */
- dw_t weakness_cutoff;
+ dw_t data_weakness_cutoff;
+
+ /* Minimal usefulness of speculative instruction to be considered for
+ scheduling. */
+ int control_weakness_cutoff;
/* Flags from the enum SPEC_SCHED_FLAGS. */
int flags;
};
typedef struct spec_info_def *spec_info_t;
-extern struct sched_info *current_sched_info;
+extern spec_info_t spec_info;
+
+extern struct haifa_sched_info *current_sched_info;
+
+/* Do register pressure sensitive insn scheduling if the flag is set
+ up. */
+extern enum sched_pressure_algorithm sched_pressure;
+
+/* Map regno -> its pressure class. The map defined only when
+ SCHED_PRESSURE_P is true. */
+extern enum reg_class *sched_regno_pressure_class;
/* Indexed by INSN_UID, the collection of all data associated with
a single instruction. */
-struct haifa_insn_data
+struct _haifa_deps_insn_data
{
+ /* The number of incoming edges in the forward dependency graph.
+ As scheduling proceeds, counts are decreased. An insn moves to
+ the ready queue when its counter reaches zero. */
+ int dep_count;
+
+ /* Nonzero if instruction has internal dependence
+ (e.g. add_dependence was invoked with (insn == elem)). */
+ unsigned int has_internal_dep;
+
/* NB: We can't place 'struct _deps_list' here instead of deps_list_t into
h_i_d because when h_i_d extends, addresses of the deps_list->first
change without updating deps_list->first->next->prev_nextp. Thus
BACK_DEPS and RESOLVED_BACK_DEPS are allocated on the heap and FORW_DEPS
list is allocated on the obstack. */
- /* A list of backward dependencies. The insn is a consumer of all the
+ /* A list of hard backward dependencies. The insn is a consumer of all the
deps mentioned here. */
- deps_list_t back_deps;
+ deps_list_t hard_back_deps;
+
+ /* A list of speculative (weak) dependencies. The insn is a consumer of all
+ the deps mentioned here. */
+ deps_list_t spec_back_deps;
/* A list of insns which depend on the instruction. Unlike 'back_deps',
it represents forward dependencies. */
/* A list of scheduled producers of the instruction. Links are being moved
from 'back_deps' to 'resolved_back_deps' while scheduling. */
deps_list_t resolved_back_deps;
-
+
+ /* A list of scheduled consumers of the instruction. Links are being moved
+ from 'forw_deps' to 'resolved_forw_deps' while scheduling to fasten the
+ search in 'forw_deps'. */
+ deps_list_t resolved_forw_deps;
+
+ /* If the insn is conditional (either through COND_EXEC, or because
+ it is a conditional branch), this records the condition. NULL
+ for insns that haven't been seen yet or don't have a condition;
+ const_true_rtx to mark an insn without a condition, or with a
+ condition that has been clobbered by a subsequent insn. */
+ rtx cond;
+
+ /* For a conditional insn, a list of insns that could set the condition
+ register. Used when generating control dependencies. */
+ rtx_insn_list *cond_deps;
+
+ /* True if the condition in 'cond' should be reversed to get the actual
+ condition. */
+ unsigned int reverse_cond : 1;
+
+ /* Some insns (e.g. call) are not allowed to move across blocks. */
+ unsigned int cant_move : 1;
+};
+
+\f
+/* Bits used for storing values of the fields in the following
+ structure. */
+#define INCREASE_BITS 8
+
+/* The structure describes how the corresponding insn increases the
+ register pressure for each pressure class. */
+struct reg_pressure_data
+{
+ /* Pressure increase for given class because of clobber. */
+ unsigned int clobber_increase : INCREASE_BITS;
+ /* Increase in register pressure for given class because of register
+ sets. */
+ unsigned int set_increase : INCREASE_BITS;
+ /* Pressure increase for given class because of unused register
+ set. */
+ unsigned int unused_set_increase : INCREASE_BITS;
+ /* Pressure change: #sets - #deaths. */
+ int change : INCREASE_BITS;
+};
+
+/* The following structure describes usage of registers by insns. */
+struct reg_use_data
+{
+ /* Regno used in the insn. */
+ int regno;
+ /* Insn using the regno. */
+ rtx_insn *insn;
+ /* Cyclic list of elements with the same regno. */
+ struct reg_use_data *next_regno_use;
+ /* List of elements with the same insn. */
+ struct reg_use_data *next_insn_use;
+};
+
+/* The following structure describes used sets of registers by insns.
+ Registers are pseudos whose pressure class is not NO_REGS or hard
+ registers available for allocations. */
+struct reg_set_data
+{
+ /* Regno used in the insn. */
+ int regno;
+ /* Insn setting the regno. */
+ rtx insn;
+ /* List of elements with the same insn. */
+ struct reg_set_data *next_insn_set;
+};
+
+enum autopref_multipass_data_status {
+ /* Entry is irrelevant for auto-prefetcher. */
+ AUTOPREF_MULTIPASS_DATA_IRRELEVANT = -2,
+ /* Entry is uninitialized. */
+ AUTOPREF_MULTIPASS_DATA_UNINITIALIZED = -1,
+ /* Entry is relevant for auto-prefetcher and insn can be delayed
+ to allow another insn through. */
+ AUTOPREF_MULTIPASS_DATA_NORMAL = 0,
+ /* Entry is relevant for auto-prefetcher, but insn should not be
+ delayed as that will break scheduling. */
+ AUTOPREF_MULTIPASS_DATA_DONT_DELAY = 1
+};
+
+/* Data for modeling cache auto-prefetcher. */
+struct autopref_multipass_data_
+{
+ /* Base part of memory address. */
+ rtx base;
+ /* Memory offset. */
+ int offset;
+ /* Entry status. */
+ enum autopref_multipass_data_status status;
+};
+typedef struct autopref_multipass_data_ autopref_multipass_data_def;
+typedef autopref_multipass_data_def *autopref_multipass_data_t;
+
+struct _haifa_insn_data
+{
+ /* We can't place 'struct _deps_list' into h_i_d instead of deps_list_t
+ because when h_i_d extends, addresses of the deps_list->first
+ change without updating deps_list->first->next->prev_nextp. */
+
/* Logical uid gives the original ordering of the insns. */
int luid;
/* A priority for each insn. */
int priority;
- /* The number of incoming edges in the forward dependency graph.
- As scheduling proceeds, counts are decreased. An insn moves to
- the ready queue when its counter reaches zero. */
- int dep_count;
-
- /* Number of instructions referring to this insn. */
- int ref_count;
+ /* The fusion priority for each insn. */
+ int fusion_priority;
/* The minimum clock tick at which the insn becomes ready. This is
used to note timing constraints for the insns in the pending list. */
int tick;
+ /* For insns that are scheduled at a fixed difference from another,
+ this records the tick in which they must be ready. */
+ int exact_tick;
+
/* INTER_TICK is used to adjust INSN_TICKs of instructions from the
subsequent blocks in a region. */
int inter_tick;
-
+
+ /* Used temporarily to estimate an INSN_TICK value for an insn given
+ current knowledge. */
+ int tick_estimate;
+
/* See comment on QUEUE_INDEX macro in haifa-sched.c. */
int queue_index;
short cost;
- /* This weight is an estimation of the insn's contribution to
- register pressure. */
- short reg_weight;
-
- /* Some insns (e.g. call) are not allowed to move across blocks. */
- unsigned int cant_move : 1;
+ /* '> 0' if priority is valid,
+ '== 0' if priority was not yet computed,
+ '< 0' if priority in invalid and should be recomputed. */
+ signed char priority_status;
/* Set if there's DEF-USE dependence between some speculatively
moved load insn and this one. */
unsigned int fed_by_spec_load : 1;
unsigned int is_load_insn : 1;
+ /* Nonzero if this insn has negative-cost forward dependencies against
+ an already scheduled insn. */
+ unsigned int feeds_backtrack_insn : 1;
- /* Nonzero if priority has been computed already. */
- unsigned int priority_known : 1;
+ /* Nonzero if this insn is a shadow of another, scheduled after a fixed
+ delay. We only emit shadows at the end of a cycle, with no other
+ real insns following them. */
+ unsigned int shadow_p : 1;
+
+ /* Used internally in unschedule_insns_until to mark insns that must have
+ their TODO_SPEC recomputed. */
+ unsigned int must_recompute_spec : 1;
- /* Nonzero if instruction has internal dependence
- (e.g. add_dependence was invoked with (insn == elem)). */
- unsigned int has_internal_dep : 1;
-
/* What speculations are necessary to apply to schedule the instruction. */
ds_t todo_spec;
+
/* What speculations were already applied. */
- ds_t done_spec;
+ ds_t done_spec;
+
/* What speculations are checked by this instruction. */
ds_t check_spec;
/* Original pattern of the instruction. */
rtx orig_pat;
+
+ /* For insns with DEP_CONTROL dependencies, the predicated pattern if it
+ was ever successfully constructed. */
+ rtx predicated_pat;
+
+ /* The following array contains info how the insn increases register
+ pressure. There is an element for each cover class of pseudos
+ referenced in insns. */
+ struct reg_pressure_data *reg_pressure;
+ /* The following array contains maximal reg pressure between last
+ scheduled insn and given insn. There is an element for each
+ pressure class of pseudos referenced in insns. This info updated
+ after scheduling each insn for each insn between the two
+ mentioned insns. */
+ int *max_reg_pressure;
+ /* The following list contains info about used pseudos and hard
+ registers available for allocation. */
+ struct reg_use_data *reg_use_list;
+ /* The following list contains info about set pseudos and hard
+ registers available for allocation. */
+ struct reg_set_data *reg_set_list;
+ /* Info about how scheduling the insn changes cost of register
+ pressure excess (between source and target). */
+ int reg_pressure_excess_cost_change;
+ int model_index;
+
+ /* Original order of insns in the ready list. */
+ int rfs_debug_orig_order;
+
+ /* The deciding reason for INSN's place in the ready list. */
+ int last_rfs_win;
+
+ /* Two entries for cache auto-prefetcher model: one for mem reads,
+ and one for mem writes. */
+ autopref_multipass_data_def autopref_multipass_data[2];
};
-extern struct haifa_insn_data *h_i_d;
-/* Used only if (current_sched_info->flags & USE_GLAT) != 0.
- These regsets store global_live_at_{start, end} information
- for each basic block. */
-extern regset *glat_start, *glat_end;
+typedef struct _haifa_insn_data haifa_insn_data_def;
+typedef haifa_insn_data_def *haifa_insn_data_t;
+
+
+extern vec<haifa_insn_data_def> h_i_d;
+
+#define HID(INSN) (&h_i_d[INSN_UID (INSN)])
/* Accessor macros for h_i_d. There are more in haifa-sched.c and
sched-rgn.c. */
-#define INSN_BACK_DEPS(INSN) (h_i_d[INSN_UID (INSN)].back_deps)
-#define INSN_FORW_DEPS(INSN) (h_i_d[INSN_UID (INSN)].forw_deps)
-#define INSN_RESOLVED_BACK_DEPS(INSN) \
- (h_i_d[INSN_UID (INSN)].resolved_back_deps)
-#define INSN_LUID(INSN) (h_i_d[INSN_UID (INSN)].luid)
-#define CANT_MOVE(insn) (h_i_d[INSN_UID (insn)].cant_move)
-#define INSN_DEP_COUNT(INSN) (h_i_d[INSN_UID (INSN)].dep_count)
-#define INSN_PRIORITY(INSN) (h_i_d[INSN_UID (INSN)].priority)
-#define INSN_PRIORITY_KNOWN(INSN) (h_i_d[INSN_UID (INSN)].priority_known)
-#define INSN_REG_WEIGHT(INSN) (h_i_d[INSN_UID (INSN)].reg_weight)
-#define HAS_INTERNAL_DEP(INSN) (h_i_d[INSN_UID (INSN)].has_internal_dep)
-#define TODO_SPEC(INSN) (h_i_d[INSN_UID (INSN)].todo_spec)
-#define DONE_SPEC(INSN) (h_i_d[INSN_UID (INSN)].done_spec)
-#define CHECK_SPEC(INSN) (h_i_d[INSN_UID (INSN)].check_spec)
-#define RECOVERY_BLOCK(INSN) (h_i_d[INSN_UID (INSN)].recovery_block)
-#define ORIG_PAT(INSN) (h_i_d[INSN_UID (INSN)].orig_pat)
+#define INSN_PRIORITY(INSN) (HID (INSN)->priority)
+#define INSN_FUSION_PRIORITY(INSN) (HID (INSN)->fusion_priority)
+#define INSN_REG_PRESSURE(INSN) (HID (INSN)->reg_pressure)
+#define INSN_MAX_REG_PRESSURE(INSN) (HID (INSN)->max_reg_pressure)
+#define INSN_REG_USE_LIST(INSN) (HID (INSN)->reg_use_list)
+#define INSN_REG_SET_LIST(INSN) (HID (INSN)->reg_set_list)
+#define INSN_REG_PRESSURE_EXCESS_COST_CHANGE(INSN) \
+ (HID (INSN)->reg_pressure_excess_cost_change)
+#define INSN_PRIORITY_STATUS(INSN) (HID (INSN)->priority_status)
+#define INSN_MODEL_INDEX(INSN) (HID (INSN)->model_index)
+#define INSN_AUTOPREF_MULTIPASS_DATA(INSN) \
+ (HID (INSN)->autopref_multipass_data)
+
+typedef struct _haifa_deps_insn_data haifa_deps_insn_data_def;
+typedef haifa_deps_insn_data_def *haifa_deps_insn_data_t;
+
+
+extern vec<haifa_deps_insn_data_def> h_d_i_d;
+
+#define HDID(INSN) (&h_d_i_d[INSN_LUID (INSN)])
+#define INSN_DEP_COUNT(INSN) (HDID (INSN)->dep_count)
+#define HAS_INTERNAL_DEP(INSN) (HDID (INSN)->has_internal_dep)
+#define INSN_FORW_DEPS(INSN) (HDID (INSN)->forw_deps)
+#define INSN_RESOLVED_BACK_DEPS(INSN) (HDID (INSN)->resolved_back_deps)
+#define INSN_RESOLVED_FORW_DEPS(INSN) (HDID (INSN)->resolved_forw_deps)
+#define INSN_HARD_BACK_DEPS(INSN) (HDID (INSN)->hard_back_deps)
+#define INSN_SPEC_BACK_DEPS(INSN) (HDID (INSN)->spec_back_deps)
+#define INSN_CACHED_COND(INSN) (HDID (INSN)->cond)
+#define INSN_REVERSE_COND(INSN) (HDID (INSN)->reverse_cond)
+#define INSN_COND_DEPS(INSN) (HDID (INSN)->cond_deps)
+#define CANT_MOVE(INSN) (HDID (INSN)->cant_move)
+#define CANT_MOVE_BY_LUID(LUID) (h_d_i_d[LUID].cant_move)
+
+
+#define INSN_PRIORITY(INSN) (HID (INSN)->priority)
+#define INSN_PRIORITY_STATUS(INSN) (HID (INSN)->priority_status)
+#define INSN_PRIORITY_KNOWN(INSN) (INSN_PRIORITY_STATUS (INSN) > 0)
+#define TODO_SPEC(INSN) (HID (INSN)->todo_spec)
+#define DONE_SPEC(INSN) (HID (INSN)->done_spec)
+#define CHECK_SPEC(INSN) (HID (INSN)->check_spec)
+#define RECOVERY_BLOCK(INSN) (HID (INSN)->recovery_block)
+#define ORIG_PAT(INSN) (HID (INSN)->orig_pat)
+#define PREDICATED_PAT(INSN) (HID (INSN)->predicated_pat)
/* INSN is either a simple or a branchy speculation check. */
-#define IS_SPECULATION_CHECK_P(INSN) (RECOVERY_BLOCK (INSN) != NULL)
+#define IS_SPECULATION_CHECK_P(INSN) \
+ (sel_sched_p () ? sel_insn_is_speculation_check (INSN) : RECOVERY_BLOCK (INSN) != NULL)
/* INSN is a speculation check that will simply reexecute the speculatively
scheduled instruction if the speculation fails. */
#define IS_SPECULATION_SIMPLE_CHECK_P(INSN) \
- (RECOVERY_BLOCK (INSN) == EXIT_BLOCK_PTR)
+ (RECOVERY_BLOCK (INSN) == EXIT_BLOCK_PTR_FOR_FN (cfun))
/* INSN is a speculation check that will branch to RECOVERY_BLOCK if the
speculation fails. Insns in that block will reexecute the speculatively
scheduled code and then will return immediately after INSN thus preserving
semantics of the program. */
#define IS_SPECULATION_BRANCHY_CHECK_P(INSN) \
- (RECOVERY_BLOCK (INSN) != NULL && RECOVERY_BLOCK (INSN) != EXIT_BLOCK_PTR)
-
-/* Dep status (aka ds_t) of the link encapsulates information, that is needed
- for speculative scheduling. Namely, it is 4 integers in the range
- [0, MAX_DEP_WEAK] and 3 bits.
- The integers correspond to the probability of the dependence to *not*
- exist, it is the probability, that overcoming of this dependence will
- not be followed by execution of the recovery code. Nevertheless,
- whatever high the probability of success is, recovery code should still
- be generated to preserve semantics of the program. To find a way to
- get/set these integers, please refer to the {get, set}_dep_weak ()
- functions in sched-deps.c .
- The 3 bits in the DEP_STATUS correspond to 3 dependence types: true-,
- output- and anti- dependence. It is not enough for speculative scheduling
- to know just the major type of all the dependence between two instructions,
- as only true dependence can be overcome.
- There also is the 4-th bit in the DEP_STATUS (HARD_DEP), that is reserved
- for using to describe instruction's status. It is set whenever instruction
- has at least one dependence, that cannot be overcame.
- See also: check_dep_status () in sched-deps.c . */
+ (RECOVERY_BLOCK (INSN) != NULL \
+ && RECOVERY_BLOCK (INSN) != EXIT_BLOCK_PTR_FOR_FN (cfun))
-/* We exclude sign bit. */
-#define BITS_PER_DEP_STATUS (HOST_BITS_PER_INT - 1)
+\f
+/* Dep status (aka ds_t) of the link encapsulates all information for a given
+ dependency, including everything that is needed for speculative scheduling.
-/* First '4' stands for 3 dep type bits and HARD_DEP bit.
- Second '4' stands for BEGIN_{DATA, CONTROL}, BE_IN_{DATA, CONTROL}
- dep weakness. */
-#define BITS_PER_DEP_WEAK ((BITS_PER_DEP_STATUS - 4) / 4)
+ The lay-out of a ds_t is as follows:
+
+ 1. Integers corresponding to the probability of the dependence to *not*
+ exist. This is the probability that overcoming this dependence will
+ not be followed by execution of the recovery code. Note that however
+ high this probability is, the recovery code should still always be
+ generated to preserve semantics of the program.
+
+ The probability values can be set or retrieved using the functions
+ the set_dep_weak() and get_dep_weak() in sched-deps.c. The values
+ are always in the range [0, MAX_DEP_WEAK].
+
+ BEGIN_DATA : BITS_PER_DEP_WEAK
+ BE_IN_DATA : BITS_PER_DEP_WEAK
+ BEGIN_CONTROL : BITS_PER_DEP_WEAK
+ BE_IN_CONTROL : BITS_PER_DEP_WEAK
+
+ The basic type of DS_T is a host int. For a 32-bits int, the values
+ will each take 6 bits.
+
+ 2. The type of dependence. This supercedes the old-style REG_NOTE_KIND
+ values. TODO: Use this field instead of DEP_TYPE, or make DEP_TYPE
+ extract the dependence type from here.
+
+ dep_type : 4 => DEP_{TRUE|OUTPUT|ANTI|CONTROL}
+
+ 3. Various flags:
+
+ HARD_DEP : 1 => Set if an instruction has a non-speculative
+ dependence. This is an instruction property
+ so this bit can only appear in the TODO_SPEC
+ field of an instruction.
+ DEP_POSTPONED : 1 => Like HARD_DEP, but the hard dependence may
+ still be broken by adjusting the instruction.
+ DEP_CANCELLED : 1 => Set if a dependency has been broken using
+ some form of speculation.
+ RESERVED : 1 => Reserved for use in the delay slot scheduler.
+
+ See also: check_dep_status () in sched-deps.c . */
+
+/* The number of bits per weakness probability. There are 4 weakness types
+ and we need 8 bits for other data in a DS_T. */
+#define BITS_PER_DEP_WEAK ((BITS_PER_DEP_STATUS - 8) / 4)
/* Mask of speculative weakness in dep_status. */
#define DEP_WEAK_MASK ((1 << BITS_PER_DEP_WEAK) - 1)
#define MIN_DEP_WEAK 1
/* This constant represents 100% probability.
- E.g. it is used to represent weakness of dependence, that doesn't exist. */
+ E.g. it is used to represent weakness of dependence, that doesn't exist.
+ This value never appears in a ds_t, it is only used for computing the
+ weakness of a dependence. */
#define NO_DEP_WEAK (MAX_DEP_WEAK + MIN_DEP_WEAK)
/* Default weakness of speculative dependence. Used when we can't say
BE_IN_CONTROL_BITS_OFFSET = BEGIN_CONTROL_BITS_OFFSET + BITS_PER_DEP_WEAK
};
-/* The following defines provide numerous constants used to distinguish between
- different types of speculative dependencies. */
+/* The following defines provide numerous constants used to distinguish
+ between different types of speculative dependencies. They are also
+ used as masks to clear/preserve the bits corresponding to the type
+ of dependency weakness. */
/* Dependence can be overcome with generation of new data speculative
instruction. */
#define DEP_TRUE (((ds_t) 1) << (BE_IN_CONTROL_BITS_OFFSET + BITS_PER_DEP_WEAK))
#define DEP_OUTPUT (DEP_TRUE << 1)
#define DEP_ANTI (DEP_OUTPUT << 1)
+#define DEP_CONTROL (DEP_ANTI << 1)
-#define DEP_TYPES (DEP_TRUE | DEP_OUTPUT | DEP_ANTI)
+#define DEP_TYPES (DEP_TRUE | DEP_OUTPUT | DEP_ANTI | DEP_CONTROL)
/* Instruction has non-speculative dependence. This bit represents the
property of an instruction - not the one of a dependence.
- Therefore, it can appear only in TODO_SPEC field of an instruction. */
-#define HARD_DEP (DEP_ANTI << 1)
+ Therefore, it can appear only in the TODO_SPEC field of an instruction. */
+#define HARD_DEP (DEP_CONTROL << 1)
+
+/* Like HARD_DEP, but dependencies can perhaps be broken by modifying
+ the instructions. This is used for example to change:
-/* This represents the results of calling sched-deps.c functions,
- which modify dependencies. Possible choices are: a dependence
- is already present and nothing has been changed; a dependence type
- has been changed; brand new dependence has been created. */
+ rn++ => rm=[rn + 4]
+ rm=[rn] rn++
+
+ For instructions that have this bit set, one of the dependencies of
+ the instructions will have a non-NULL REPLACE field in its DEP_T.
+ Just like HARD_DEP, this bit is only ever set in TODO_SPEC. */
+#define DEP_POSTPONED (HARD_DEP << 1)
+
+/* Set if a dependency is cancelled via speculation. */
+#define DEP_CANCELLED (DEP_POSTPONED << 1)
+
+\f
+/* This represents the results of calling sched-deps.c functions,
+ which modify dependencies. */
enum DEPS_ADJUST_RESULT {
- DEP_PRESENT = 1,
- DEP_CHANGED = 2,
- DEP_CREATED = 3
+ /* No dependence needed (e.g. producer == consumer). */
+ DEP_NODEP,
+ /* Dependence is already present and wasn't modified. */
+ DEP_PRESENT,
+ /* Existing dependence was modified to include additional information. */
+ DEP_CHANGED,
+ /* New dependence has been created. */
+ DEP_CREATED
};
-/* Represents the bits that can be set in the flags field of the
+/* Represents the bits that can be set in the flags field of the
sched_info structure. */
enum SCHED_FLAGS {
/* If set, generate links between instruction as DEPS_LIST.
Results in generation of data and control speculative dependencies.
Requires USE_DEPS_LIST set. */
DO_SPECULATION = USE_DEPS_LIST << 1,
- SCHED_RGN = DO_SPECULATION << 1,
+ DO_BACKTRACKING = DO_SPECULATION << 1,
+ DO_PREDICATION = DO_BACKTRACKING << 1,
+ DONT_BREAK_DEPENDENCIES = DO_PREDICATION << 1,
+ SCHED_RGN = DONT_BREAK_DEPENDENCIES << 1,
SCHED_EBB = SCHED_RGN << 1,
- /* Detach register live information from basic block headers.
- This is necessary to invoke functions, that change CFG (e.g. split_edge).
- Requires USE_GLAT. */
- DETACH_LIFE_INFO = SCHED_EBB << 1,
- /* Save register live information from basic block headers to
- glat_{start, end} arrays. */
- USE_GLAT = DETACH_LIFE_INFO << 1
+ /* Scheduler can possibly create new basic blocks. Used for assertions. */
+ NEW_BBS = SCHED_EBB << 1,
+ SEL_SCHED = NEW_BBS << 1
};
enum SPEC_SCHED_FLAGS {
COUNT_SPEC_IN_CRITICAL_PATH = 1,
- PREFER_NON_DATA_SPEC = COUNT_SPEC_IN_CRITICAL_PATH << 1,
- PREFER_NON_CONTROL_SPEC = PREFER_NON_DATA_SPEC << 1
+ SEL_SCHED_SPEC_DONT_CHECK_CONTROL = COUNT_SPEC_IN_CRITICAL_PATH << 1
};
-#define NOTE_NOT_BB_P(NOTE) (NOTE_P (NOTE) && (NOTE_LINE_NUMBER (NOTE) \
+#define NOTE_NOT_BB_P(NOTE) (NOTE_P (NOTE) && (NOTE_KIND (NOTE) \
!= NOTE_INSN_BASIC_BLOCK))
extern FILE *sched_dump;
extern int sched_verbose;
+extern spec_info_t spec_info;
+extern bool haifa_recovery_bb_ever_added_p;
+
/* Exception Free Loads:
We define five classes of speculative loads: IFREE, IRISKY,
#define HAIFA_INLINE __inline
#endif
-/* Functions in sched-vis.c. */
-extern void print_insn (char *, rtx, int);
+struct sched_deps_info_def
+{
+ /* Called when computing dependencies for a JUMP_INSN. This function
+ should store the set of registers that must be considered as set by
+ the jump in the regset. */
+ void (*compute_jump_reg_dependencies) (rtx, regset);
+
+ /* Start analyzing insn. */
+ void (*start_insn) (rtx_insn *);
+
+ /* Finish analyzing insn. */
+ void (*finish_insn) (void);
+
+ /* Start analyzing insn LHS (Left Hand Side). */
+ void (*start_lhs) (rtx);
+
+ /* Finish analyzing insn LHS. */
+ void (*finish_lhs) (void);
+
+ /* Start analyzing insn RHS (Right Hand Side). */
+ void (*start_rhs) (rtx);
+
+ /* Finish analyzing insn RHS. */
+ void (*finish_rhs) (void);
+
+ /* Note set of the register. */
+ void (*note_reg_set) (int);
+
+ /* Note clobber of the register. */
+ void (*note_reg_clobber) (int);
+
+ /* Note use of the register. */
+ void (*note_reg_use) (int);
+
+ /* Note memory dependence of type DS between MEM1 and MEM2 (which is
+ in the INSN2). */
+ void (*note_mem_dep) (rtx mem1, rtx mem2, rtx_insn *insn2, ds_t ds);
+
+ /* Note a dependence of type DS from the INSN. */
+ void (*note_dep) (rtx_insn *, ds_t ds);
+
+ /* Nonzero if we should use cselib for better alias analysis. This
+ must be 0 if the dependency information is used after sched_analyze
+ has completed, e.g. if we're using it to initialize state for successor
+ blocks in region scheduling. */
+ unsigned int use_cselib : 1;
+
+ /* If set, generate links between instruction as DEPS_LIST.
+ Otherwise, generate usual INSN_LIST links. */
+ unsigned int use_deps_list : 1;
+
+ /* Generate data and control speculative dependencies.
+ Requires USE_DEPS_LIST set. */
+ unsigned int generate_spec_deps : 1;
+};
+
+extern struct sched_deps_info_def *sched_deps_info;
+
/* Functions in sched-deps.c. */
-extern bool sched_insns_conditions_mutex_p (rtx, rtx);
-extern void add_dependence (rtx, rtx, enum reg_note);
-extern void sched_analyze (struct deps *, rtx, rtx);
-extern void init_deps (struct deps *);
-extern void free_deps (struct deps *);
+extern rtx sched_get_reverse_condition_uncached (const rtx_insn *);
+extern bool sched_insns_conditions_mutex_p (const rtx_insn *,
+ const rtx_insn *);
+extern bool sched_insn_is_legitimate_for_speculation_p (const rtx_insn *, ds_t);
+extern void add_dependence (rtx_insn *, rtx_insn *, enum reg_note);
+extern void sched_analyze (struct deps_desc *, rtx_insn *, rtx_insn *);
+extern void init_deps (struct deps_desc *, bool);
+extern void init_deps_reg_last (struct deps_desc *);
+extern void free_deps (struct deps_desc *);
extern void init_deps_global (void);
extern void finish_deps_global (void);
-extern void add_forw_dep (dep_link_t);
-extern void compute_forward_dependences (rtx, rtx);
-extern void init_dependency_caches (int);
-extern void free_dependency_caches (void);
-extern void extend_dependency_caches (int, bool);
-extern enum DEPS_ADJUST_RESULT add_or_update_back_dep (rtx, rtx,
- enum reg_note, ds_t);
-extern void add_or_update_back_forw_dep (rtx, rtx, enum reg_note, ds_t);
-extern void add_back_forw_dep (rtx, rtx, enum reg_note, ds_t);
-extern void delete_back_forw_dep (dep_link_t);
+extern void deps_analyze_insn (struct deps_desc *, rtx_insn *);
+extern void remove_from_deps (struct deps_desc *, rtx_insn *);
+extern void init_insn_reg_pressure_info (rtx_insn *);
+
extern dw_t get_dep_weak (ds_t, ds_t);
extern ds_t set_dep_weak (ds_t, ds_t, dw_t);
+extern dw_t estimate_dep_weak (rtx, rtx);
extern ds_t ds_merge (ds_t, ds_t);
+extern ds_t ds_full_merge (ds_t, ds_t, rtx, rtx);
+extern ds_t ds_max_merge (ds_t, ds_t);
+extern dw_t ds_weak (ds_t);
+extern ds_t ds_get_speculation_types (ds_t);
+extern ds_t ds_get_max_dep_weak (ds_t);
-/* Functions in haifa-sched.c. */
-extern int haifa_classify_insn (rtx);
-extern void get_ebb_head_tail (basic_block, basic_block, rtx *, rtx *);
-extern int no_real_insns_p (rtx, rtx);
+extern void sched_deps_init (bool);
+extern void sched_deps_finish (void);
+
+extern void haifa_note_reg_set (int);
+extern void haifa_note_reg_clobber (int);
+extern void haifa_note_reg_use (int);
-extern void rm_other_notes (rtx, rtx);
+extern void maybe_extend_reg_info_p (void);
-extern int insn_cost (rtx);
+extern void deps_start_bb (struct deps_desc *, rtx_insn *);
+extern enum reg_note ds_to_dt (ds_t);
+
+extern bool deps_pools_are_empty_p (void);
+extern void sched_free_deps (rtx_insn *, rtx_insn *, bool);
+extern void extend_dependency_caches (int, bool);
+
+extern void debug_ds (ds_t);
+
+
+/* Functions in haifa-sched.c. */
+extern void initialize_live_range_shrinkage (void);
+extern void finish_live_range_shrinkage (void);
+extern void sched_init_region_reg_pressure_info (void);
+extern void free_global_sched_pressure_data (void);
+extern int haifa_classify_insn (const_rtx);
+extern void get_ebb_head_tail (basic_block, basic_block,
+ rtx_insn **, rtx_insn **);
+extern int no_real_insns_p (const rtx_insn *, const rtx_insn *);
+
+extern int insn_cost (rtx_insn *);
+extern int dep_cost_1 (dep_t, dw_t);
extern int dep_cost (dep_t);
-extern int set_priorities (rtx, rtx);
+extern int set_priorities (rtx_insn *, rtx_insn *);
-extern void schedule_block (basic_block *, int);
-extern void sched_init (void);
-extern void sched_finish (void);
+extern void sched_setup_bb_reg_pressure_info (basic_block, rtx_insn *);
+extern bool schedule_block (basic_block *, state_t);
-extern int try_ready (rtx);
-extern void * xrecalloc (void *, size_t, size_t, size_t);
+extern int cycle_issued_insns;
+extern int issue_rate;
+extern int dfa_lookahead;
+
+extern int autopref_multipass_dfa_lookahead_guard (rtx_insn *, int);
+
+extern rtx_insn *ready_element (struct ready_list *, int);
+extern rtx_insn **ready_lastpos (struct ready_list *);
+
+extern int try_ready (rtx_insn *);
+extern void sched_extend_ready_list (int);
+extern void sched_finish_ready_list (void);
+extern void sched_change_pattern (rtx, rtx);
+extern int sched_speculate_insn (rtx_insn *, ds_t, rtx *);
extern void unlink_bb_notes (basic_block, basic_block);
extern void add_block (basic_block, basic_block);
-extern void attach_life_info (void);
-extern rtx bb_note (basic_block);
+extern rtx_note *bb_note (basic_block);
+extern void concat_note_lists (rtx_insn *, rtx_insn **);
+extern rtx_insn *sched_emit_insn (rtx);
+extern rtx_insn *get_ready_element (int);
+extern int number_in_ready (void);
+\f
+/* Types and functions in sched-ebb.c. */
+
+extern basic_block schedule_ebb (rtx_insn *, rtx_insn *, bool);
+extern void schedule_ebbs_init (void);
+extern void schedule_ebbs_finish (void);
+\f
+/* Types and functions in sched-rgn.c. */
+
+/* A region is the main entity for interblock scheduling: insns
+ are allowed to move between blocks in the same region, along
+ control flow graph edges, in the 'up' direction. */
+struct region
+{
+ /* Number of extended basic blocks in region. */
+ int rgn_nr_blocks;
+ /* cblocks in the region (actually index in rgn_bb_table). */
+ int rgn_blocks;
+ /* Dependencies for this region are already computed. Basically, indicates,
+ that this is a recovery block. */
+ unsigned int dont_calc_deps : 1;
+ /* This region has at least one non-trivial ebb. */
+ unsigned int has_real_ebb : 1;
+};
-#ifdef ENABLE_CHECKING
-extern void check_reg_live (bool);
-#endif
+extern int nr_regions;
+extern region *rgn_table;
+extern int *rgn_bb_table;
+extern int *block_to_bb;
+extern int *containing_rgn;
+
+/* Often used short-hand in the scheduler. The rest of the compiler uses
+ BLOCK_FOR_INSN(INSN) and an indirect reference to get the basic block
+ number ("index"). For historical reasons, the scheduler does not. */
+#define BLOCK_NUM(INSN) (BLOCK_FOR_INSN (INSN)->index + 0)
+
+#define RGN_NR_BLOCKS(rgn) (rgn_table[rgn].rgn_nr_blocks)
+#define RGN_BLOCKS(rgn) (rgn_table[rgn].rgn_blocks)
+#define RGN_DONT_CALC_DEPS(rgn) (rgn_table[rgn].dont_calc_deps)
+#define RGN_HAS_REAL_EBB(rgn) (rgn_table[rgn].has_real_ebb)
+#define BLOCK_TO_BB(block) (block_to_bb[block])
+#define CONTAINING_RGN(block) (containing_rgn[block])
+
+/* The mapping from ebb to block. */
+extern int *ebb_head;
+#define BB_TO_BLOCK(ebb) (rgn_bb_table[ebb_head[ebb]])
+#define EBB_FIRST_BB(ebb) BASIC_BLOCK_FOR_FN (cfun, BB_TO_BLOCK (ebb))
+#define EBB_LAST_BB(ebb) \
+ BASIC_BLOCK_FOR_FN (cfun, rgn_bb_table[ebb_head[ebb + 1] - 1])
+#define INSN_BB(INSN) (BLOCK_TO_BB (BLOCK_NUM (INSN)))
+
+extern int current_nr_blocks;
+extern int current_blocks;
+extern int target_bb;
+extern bool sched_no_dce;
+
+extern void set_modulo_params (int, int, int, int);
+extern void record_delay_slot_pair (rtx_insn *, rtx_insn *, int, int);
+extern rtx_insn *real_insn_for_shadow (rtx_insn *);
+extern void discard_delay_pairs_above (int);
+extern void free_delay_pairs (void);
+extern void add_delay_dependencies (rtx_insn *);
+extern bool sched_is_disabled_for_current_region_p (void);
+extern void sched_rgn_init (bool);
+extern void sched_rgn_finish (void);
+extern void rgn_setup_region (int);
+extern void sched_rgn_compute_dependencies (int);
+extern void sched_rgn_local_init (int);
+extern void sched_rgn_local_finish (void);
+extern void sched_rgn_local_free (void);
+extern void extend_regions (void);
+extern void rgn_make_new_region_out_of_new_block (basic_block);
+
+extern void compute_priorities (void);
+extern void increase_insn_priority (rtx_insn *, int);
+extern void debug_rgn_dependencies (int);
+extern void debug_dependencies (rtx_insn *, rtx_insn *);
+extern void free_rgn_deps (void);
+extern int contributes_to_priority (rtx_insn *, rtx_insn *);
+extern void extend_rgns (int *, int *, sbitmap, int *);
+extern void deps_join (struct deps_desc *, struct deps_desc *);
+
+extern void rgn_setup_common_sched_info (void);
+extern void rgn_setup_sched_infos (void);
+
+extern void debug_regions (void);
+extern void debug_region (int);
+extern void dump_region_dot (FILE *, int);
+extern void dump_region_dot_file (const char *, int);
+
+extern void haifa_sched_init (void);
+extern void haifa_sched_finish (void);
+
+extern void find_modifiable_mems (rtx_insn *, rtx_insn *);
+
+/* sched-deps.c interface to walk, add, search, update, resolve, delete
+ and debug instruction dependencies. */
+
+/* Constants defining dependences lists. */
+
+/* No list. */
+#define SD_LIST_NONE (0)
+
+/* hard_back_deps. */
+#define SD_LIST_HARD_BACK (1)
+
+/* spec_back_deps. */
+#define SD_LIST_SPEC_BACK (2)
+
+/* forw_deps. */
+#define SD_LIST_FORW (4)
+
+/* resolved_back_deps. */
+#define SD_LIST_RES_BACK (8)
+
+/* resolved_forw_deps. */
+#define SD_LIST_RES_FORW (16)
+
+#define SD_LIST_BACK (SD_LIST_HARD_BACK | SD_LIST_SPEC_BACK)
+
+/* A type to hold above flags. */
+typedef int sd_list_types_def;
+
+extern void sd_next_list (const_rtx, sd_list_types_def *, deps_list_t *, bool *);
+
+/* Iterator to walk through, resolve and delete dependencies. */
+struct _sd_iterator
+{
+ /* What lists to walk. Can be any combination of SD_LIST_* flags. */
+ sd_list_types_def types;
+
+ /* Instruction dependencies lists of which will be walked. */
+ rtx insn;
+
+ /* Pointer to the next field of the previous element. This is not
+ simply a pointer to the next element to allow easy deletion from the
+ list. When a dep is being removed from the list the iterator
+ will automatically advance because the value in *linkp will start
+ referring to the next element. */
+ dep_link_t *linkp;
+
+ /* True if the current list is a resolved one. */
+ bool resolved_p;
+};
+
+typedef struct _sd_iterator sd_iterator_def;
+
+/* ??? We can move some definitions that are used in below inline functions
+ out of sched-int.h to sched-deps.c provided that the below functions will
+ become global externals.
+ These definitions include:
+ * struct _deps_list: opaque pointer is needed at global scope.
+ * struct _dep_link: opaque pointer is needed at scope of sd_iterator_def.
+ * struct _dep_node: opaque pointer is needed at scope of
+ struct _deps_link. */
+
+/* Return initialized iterator. */
+static inline sd_iterator_def
+sd_iterator_start (rtx insn, sd_list_types_def types)
+{
+ /* Some dep_link a pointer to which will return NULL. */
+ static dep_link_t null_link = NULL;
+
+ sd_iterator_def i;
+
+ i.types = types;
+ i.insn = insn;
+ i.linkp = &null_link;
+
+ /* Avoid 'uninitialized warning'. */
+ i.resolved_p = false;
+
+ return i;
+}
+
+/* Return the current element. */
+static inline bool
+sd_iterator_cond (sd_iterator_def *it_ptr, dep_t *dep_ptr)
+{
+ while (true)
+ {
+ dep_link_t link = *it_ptr->linkp;
+
+ if (link != NULL)
+ {
+ *dep_ptr = DEP_LINK_DEP (link);
+ return true;
+ }
+ else
+ {
+ sd_list_types_def types = it_ptr->types;
+
+ if (types != SD_LIST_NONE)
+ /* Switch to next list. */
+ {
+ deps_list_t list;
+
+ sd_next_list (it_ptr->insn,
+ &it_ptr->types, &list, &it_ptr->resolved_p);
+
+ it_ptr->linkp = &DEPS_LIST_FIRST (list);
+
+ if (list)
+ continue;
+ }
+
+ *dep_ptr = NULL;
+ return false;
+ }
+ }
+}
+
+/* Advance iterator. */
+static inline void
+sd_iterator_next (sd_iterator_def *it_ptr)
+{
+ it_ptr->linkp = &DEP_LINK_NEXT (*it_ptr->linkp);
+}
+
+/* A cycle wrapper. */
+#define FOR_EACH_DEP(INSN, LIST_TYPES, ITER, DEP) \
+ for ((ITER) = sd_iterator_start ((INSN), (LIST_TYPES)); \
+ sd_iterator_cond (&(ITER), &(DEP)); \
+ sd_iterator_next (&(ITER)))
+
+#define IS_DISPATCH_ON 1
+#define IS_CMP 2
+#define DISPATCH_VIOLATION 3
+#define FITS_DISPATCH_WINDOW 4
+#define DISPATCH_INIT 5
+#define ADD_TO_DISPATCH_WINDOW 6
+
+extern int sd_lists_size (const_rtx, sd_list_types_def);
+extern bool sd_lists_empty_p (const_rtx, sd_list_types_def);
+extern void sd_init_insn (rtx_insn *);
+extern void sd_finish_insn (rtx_insn *);
+extern dep_t sd_find_dep_between (rtx, rtx, bool);
+extern void sd_add_dep (dep_t, bool);
+extern enum DEPS_ADJUST_RESULT sd_add_or_update_dep (dep_t, bool);
+extern void sd_resolve_dep (sd_iterator_def);
+extern void sd_unresolve_dep (sd_iterator_def);
+extern void sd_copy_back_deps (rtx_insn *, rtx_insn *, bool);
+extern void sd_delete_dep (sd_iterator_def);
+extern void sd_debug_lists (rtx, sd_list_types_def);
+
+/* Macros and declarations for scheduling fusion. */
+#define FUSION_MAX_PRIORITY (INT_MAX)
+extern bool sched_fusion;
+
+#endif /* INSN_SCHEDULING */
#endif /* GCC_SCHED_INT_H */
+