+2007-10-12 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * ia64-linux-nat.c (ia64_register_addr): Add gdbarch parameter,
+ replacing use of global current_gdbarch.
+ (ia64_cannot_fetch_register, ia64_cannot_store_register): Likewise.
+ (ia64_linux_fetch_register, ia64_linux_store_register): Update callers.
+
+ * ia64-tdep.c (SIGCONTEXT_REGISTER_ADDRESS): Remove macro.
+ (ia64_sigtramp_frame_init_saved_regs): Add next_frame parameter,
+ replace uses of SIGCONTEXT_REGISTER_ADDRESS.
+ (ia64_sigtramp_frame_cache): Update caller.
+
+2007-10-12 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * gdbarch.sh (deprecated_use_struct_convention): Remove.
+ (extract_return_value, store_return_value): Remove.
+ (return_value): Remove default implementation.
+ * gdbarch.c, gdbarch.h: Regenerate.
+
+ * stack.c (return_command): Remove compatibility hack.
+ * arch-utils.c (legacy_return_value): Remove.
+ * arch-utils.h (legacy_return_value): Likewise.
+
+ * arch-utils.c (always_use_struct_convention): Remove.
+ * arch-utils.h (always_use_struct_convention): Likewise.
+ * value.c (generic_use_struct_convention): Remove.
+ * defs.h (generic_use_struct_convention): Likewise.
+
+2007-10-12 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * avr-tdep.c (avr_return_value): New function.
+ (avr_gdbarch_init): Call set_gdbarch_return_value instead of
+ set_gdbarch_extract_return_value.
+
+ * fvr-tdep.c (frv_return_value): New function.
+ (frv_gdbarch_init): Call set_gdbarch_return_value instead of
+ set_gdbarch_extract_return_value, set_gdbarch_store_return_value,
+ and set_gdbarch_deprecated_use_struct_convention.
+
+ * ia64-tdep.c (ia64_use_struct_convention): Make static.
+ Add check for structure, union, or array types.
+ (ia64_extract_return_value): Make static.
+ (ia64_store_return_value): Make static. Support multi-word values.
+ (ia64_return_value): New function.
+ (ia64_gdbarch_init): Call set_gdbarch_return_value instead of
+ set_gdbarch_extract_return_value, set_gdbarch_store_return_value,
+ and set_gdbarch_deprecated_use_struct_convention.
+
+2007-10-12 Joel Brobecker <brobecker@adacore.com>
+
+ * solib-target.c (solib_target_parse_libraries)
+ [HAVEHAVE_LIBEXPAT not defined]: Fix thinko in return type.
+
+2007-10-12 Jim Blandy <jimb@codesourcery.com>
+
+ * serial.h (struct serial_ops): Document read_prim to return zero
+ at EOF.
+ * ser-base.c (do_ser_base_readchar): Return SERIAL_EOF when
+ read_prim returns zero, not SERIAL_TIMEOUT.
+
+2007-10-12 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * alpha-mdebug-tdep.c: Include "gdb_string.h".
+ (find_proc_desc): Add fix-up code for setjmp procedure descriptor.
+ * mdebugread.c (parse_procedure): Remove setjmp fix-up code.
+ * Makefile.in (alpha-mdebug-tdep.o): Update dependencies.
+
+ * config/alpha/alpha.mt (DEPRECATED_TM_FILE): Remove.
+ * config/alpha/alpha-linux.mt (DEPRECATED_TM_FILE): Remove.
+ * config/alpha/alpha-osf1.mt (DEPRECATED_TM_FILE): Remove.
+ * config/alpha/fbsd.mt (DEPRECATED_TM_FILE): Remove.
+ * config/alpha/tm-alpha.h: Remove file.
+
+2007-10-12 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * breakpoint.c (breakpoint_sals_to_pc): Do not check for
+ DEPRECATED_PC_REQUIRES_RUN_BEFORE_USE.
+
+ * config/pa/tm-hppa.h: Delete file.
+ * config/pa/hppa64.mt: Do not set DEPRECATED_TM_FILE.
+ * config/pa/hppahpux.mt: Likewise.
+ * config/pa/hppa.mt: Likewise.
+ * config/pa/linux.mt: Likewise.
+ * hppa-tdep.c (hppa_pc_requires_run_before_use): Delete.
+
+2007-10-12 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * config/arm/nm-nbsdaout.h: Remove file.
+ * config/nm-nbsdaout.h: Likewise.
+ * config/nm-nbsd.h: Likewise.
+
+2007-10-12 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * block.h (struct block): Remove "gcc_compile_flag" member.
+ (BLOCK_GCC_COMPILED): Remove.
+ * block.c (allocate_block): Do not clear BLOCK_GCC_COMPILED.
+ * buildsym.c (finish_block): Do not set it.
+ * symmisc.c (dump_symtab_1): Do not dump it.
+
+ * value.h (using_struct_return): Remove "gcc_p" argument.
+ * value.c (using_struct_return): Likewise.
+ * eval.c (evaluate_subexp_standard): Adapt callers.
+ * infcall.c (call_function_by_hand): Likewise.
+ * stack.c (return_command): Likewise.
+ * sparc-tdep.c (sparc32_push_dummy_code): Likewise.
+
+ * gdbarch.sh (push_dummy_code): Remove "using_gcc" parameter.
+ * gdbarch.c, gdbarch.h: Regenerate.
+ * cris-tdep.c (cris_push_dummy_code): Adapt prototype.
+ * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Likewise.
+ * sparc-tdep.c (sparc32_push_dummy_code): Likewise.
+ * infcall.c (generic_push_dummy_code, push_dummy_code): Likewise.
+ (push_dummy_code, call_function_by_hand): Adapt callers.
+
+2007-10-12 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * infcmd.c (print_return_value): Remove STRUCT_RETURN argument.
+ (finish_command_continuation, finish_command): Adapt callers.
+
+2007-10-12 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * infcall.c (call_function_by_hand): Remove special handling
+ for HP aCC compiled code.
+
+2007-10-12 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * cris-tdep.c (cris_push_dummy_call): Support arguments passed by
+ reference. Fix endianness bugs.
+ (cris_reg_struct_has_address): Remove.
+ (cris_gdbarch_init): Remove set_gdbarch_deprecated_reg_struct_has_addr
+ and set_gdbarch_deprecated_use_struct_convention calls.
+
+ * gdbarch.sh (deprecated_reg_struct_has_addr): Remove.
+ * gdbarch.c, gdbarch.h: Regenerate.
+ * infcall.c (call_function_by_hand): Remove handling of
+ deprecated_reg_struct_has_addr.
+
+2007-10-11 Daniel Jacobowitz <dan@codesourcery.com>
+ Kazu Hirata <kazu@codesourcery.com>
+
+ * breakpoint.c (do_enable_breakpoint): Delay enabling until after
+ checking watchpoint resources.
+
+2007-10-11 Kazu Hirata <kazu@codesourcery.com>
+
+ * memattr.c (inaccessible_by_default): Change the initial
+ value to 1.
+
+2007-10-11 Daniel Jacobowitz <dan@codesourcery.com>
+
+ PR gdb/2280
+ * coffread.c (read_one_sym): Check for read errors.
+
+2007-10-11 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * linux-nat.c (lin_lwp_attach_lwp): Use "Linux kernel 2.6.19"
+ instead of "Linux 2.6.19" in comment.
+ (linux_xfer_partial): Use "GNU/Linux target" instead of
+ "Linux target" in comment.
+ * m68klinux-tdep.c (m68k_linux_inferior_created): Likewise.
+ (m68k_linux_get_sigtramp_info): Likewise.
+
+2007-10-11 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * MAINTAINERS (language support): List Joel and Paul as
+ Ada maintainers.
+
+2007-10-11 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * dbxread.c (process_one_symbol): Remove VARIABLES_INSIDE_BLOCK
+ checks.
+ * config/arm/embed.mt, config/arm/linux.mt, config/arm/wince.mt: Do
+ not set DEPRECATED_TM_FILE.
+ * config/arm/tm-arm.h: Delete file.
+
+2007-10-11 Luis Machado <luisgpm@br.ibm.com>
+
+ * MAINTAINERS (Write After Approval): Add self.
+
+2007-10-11 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * buildsym.c (record_line): Remove empty lines followed by
+ end-of-sequence markers.
+
+2007-10-11 Kazu Hirata <kazu@codesourcery.com>
+
+ * configure.tgt: Recognize fido-*-elf.
+
+2007-10-10 Joel Brobecker <brobecker@adacore.com>
+
+ GDB 6.7 released.
+
+2007-10-10 Markus Deuling <deuling@de.ibm.com>
+
+ * stack.c (print_frame_args, frame_info, return_command): Use
+ get_regcache_arch or get_frame_arch to get at the current architecture
+ by regcache or by frame, respectively.
+
+2007-10-10 Markus Deuling <deuling@de.ibm.com>
+
+ * rs6000-nat.c (fetch_register, store_register)
+ (rs6000_fetch_inferior_registers, rs6000_store_inferior_registers): Use
+ get_regcache_arch to get at the current architecture by regcache.
+
+ * rs6000-tdep.c (rs6000_push_dummy_call, rs6000_return_value)
+ (rs6000_register_reggroup_p, e500_move_ev_registe, rs6000_unwind_pc)
+ (rs6000_unwind_dummy_id, rs6000_frame_cache, rs6000_dump_tdep): Replace
+ current_gdbarch by gdbarch.
+ (rs6000_skip_trampoline_code, rs6000_register_to_value)
+ (rs6000_value_to_register): Use get_frame_arch to get at the current
+ architecture by frame_info.
+
+2007-10-10 Markus Deuling <deuling@de.ibm.com>
+
+ * sparc-tdep.c (sparc_supply_rwindow, sparc_collect_rwindow): Use
+ get_regcache_arch to get at the current architecture by regcache.
+
+ * sparc64-tdep.c (sparc64_supply_gregset, sparc64_collect_gregset)
+ (sparc64_supply_fpregset, sparc64_collect_fpregset): Use
+ get_regcache_arch to get at the current architecture by regcache.
+
+ * sparc64nbsd-nat. (sparc64nbsd_supply_gregset)
+ (sparc64nbsd_collect_gregset, sparc64nbsd_supply_fpregset)
+ (sparc64nbsd_collect_fpregset): Use get_regcache_arch to get at the
+ current architecture by regcache.
+
+2007-10-10 Markus Deuling <deuling@de.ibm.com>
+
+ * remote-mips.c (mips_wait, mips_fetch_registers)
+ (mips_store_registers): Use get_regcache_arch to get at the
+ current architecture by regcache.
+
+ * mipsnbsd-tdep.c (mipsnbsd_supply_reg, mipsnbsd_fill_reg)
+ (mipsnbsd_supply_fpreg, mipsnbsd_fill_fpreg): Use get_regcache_arch to
+ get at the current architecture by regcache.
+ (mipsnbsd_sigtramp_offset): Use get_frame_arch to get at the current
+ architecture by frame_info.
+
+ * mipsnbsd-nat.c (mipsnbsd_fetch_inferior_registers)
+ (mipsnbsd_store_inferior_registers): Use get_regcache_arch to get at
+ the current architecture by regcache.
+
+ * mips-linux-tdep.c (mips_linux_get_longjmp_target)
+ (mips64_linux_get_longjmp_target, mips_linux_o32_sigframe_init)
+ (mips_linux_n32n64_sigframe_init): Use get_frame_arch to get at the
+ current architecture by frame_info.
+ (supply_32bit_reg, mips_supply_gregset, mips_fill_gregset)
+ (mips_supply_fpregset, mips_fill_fpregset, supply_64bit_reg)
+ (mips64_supply_gregset, mips64_fill_gregset, mips64_supply_fpregset)
+ (mips64_fill_fpregset, mips_linux_write_pc): Use get_regcache_arch to
+ get at the current architecture by regcache.
+
+ * mips-linux-nat.c (mips_linux_register_addr)
+ (mips64_linux_register_addr): Replace current_gdbarch by gdbarch.
+ (supply_gregset, fill_gregset, supply_fpregset, fill_fpregset)
+ (mips64_linux_regsets_fetch_registers)
+ (mips64_linux_regsets_store_registers): Use get_regcache_arch to get at
+ the current architecture by regcache.
+
+ * mips64obsd-tdep.c (mips64obsd_sigframe_init): Use get_frame_arch to
+ get at the current architecture by frame_info.
+
+2007-10-10 Markus Deuling <deuling@de.ibm.com>
+
+ * mips-tdep.c (mips_xfer_register): Use get_regcache_arch to get at the
+ current architecture by regcache.
+ (mips2_fp_compat, mips32_next_pc, mips16_scan_prologue)
+ (mips_insn16_frame_cache, mips32_scan_prologue, mips_insn32_frame_cache)
+ (mips_stub_frame_cache, mips_read_fp_register_single)
+ (mips_read_fp_register_double, mips_print_fp_register)
+ (mips_print_register, print_gp_register_row): Use get_frame_arch to get
+ at the current architecture by frame_info.
+ (mips_register_reggroup_p, mips_pseudo_register_read, mips_unwind_sp)
+ (mips_pseudo_register_write, mips_register_type, mips_unwind_pc)
+ (mips_unwind_dummy_id, mips_eabi_push_dummy_call)
+ (mips_n32n64_push_dummy_call, mips_n32n64_return_value)
+ (mips_o32_push_dummy_call, mips_o32_return_value)
+ (mips_o64_push_dummy_call, mips_o64_return_value)
+ (mips_print_registers_info, mips_dump_tdep): Replace current_gdbarch by
+ gdbarch.
+
+2007-10-10 Markus Deuling <deuling@de.ibm.com>
+
+ * xtensa-tdep.c (xtensa_register_type, xtensa_pseudo_register_read)
+ (xtensa_pseudo_register_write, xtensa_register_reggroup_p)
+ (xtensa_unwind_pc, xtensa_unwind_dummy_id, xtensa_push_dummy_call)
+ (xtensa_dump_tdep): Replace current_gdbarch by gdbarch.
+ (xtensa_register_write_masked, xtensa_register_read_masked)
+ (xtensa_supply_gregset, xtensa_store_return_value)
+ (xtensa_extract_return_value): Use get_regcache_arch to get at the
+ current architecture by regcache.
+ (xtensa_frame_cache, call0_frame_get_reg_at_entry, call0_frame_cache)
+ (xtensa_frame_prev_register): Use get_frame_arch to get at the current
+ architecture by frame_info.
+
+2007-10-10 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * arm-tdep.c (struct arm_prologue_cache): Remove frameoffset.
+ (thumb_analyze_prologue): Move pv_area_store_would_trash call
+ out of loop. Do not set cache->frameoffset.
+ (arm_scan_prologue): Use prologue-value mechanism. Do not set
+ frameoffset. Simplify framesize.
+ (arm_make_prologue_cache, arm_normal_frame_base): Do not use
+ frameoffset.
+ * arm-tdep.h (enum gdb_regnum): Add ARM_IP_REGNUM.
+
+2007-10-10 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * target.c (update_current_target): Call setup_target_debug.
+ (push_target): Do not call it here.
+
+2007-10-09 Michael Snyder <msnyder@specifix.com>
+
+ * MAINTAINERS: Update my email address.
+
+2007-10-09 Markus Deuling <deuling@de.ibm.com>
+
+ * xtensa-tdep.c: Replace following current-gdbarch based macros by
+ their expression:
+ (xtensa_pseudo_register_read)
+ (xtensa_pseudo_register_write): XTENSA_TARGET_FLAGS.
+ (ARG_NOF, ARG_1ST, xtensa_extract_return_value)
+ (xtensa_store_return_value, xtensa_push_dummy_call): CALL_ABI.
+ (xtensa_pseudo_register_read)
+ (xtensa_pseudo_register_write): ISA_USE_WINDOWED_REGISTERS.
+ (xtensa_breakpoint_from_pc): ISA_USE_DENSITY_INSTRUCTIONS.
+ (xtensa_register_type, xtensa_supply_gregset, xtensa_frame_cache)
+ (xtensa_frame_prev_register): NUM_AREGS.
+ (xtensa_pseudo_register_read, xtensa_pseudo_register_write,
+ (xtensa_supply_gregset, xtensa_frame_cache, xtensa_frame_prev_register,
+ (xtensa_extract_return_value, xtensa_store_return_value): WB_REGNUM.
+ (xtensa_supply_gregset, xtensa_frame_cache)
+ (xtensa_frame_prev_register): WS_REGNUM.
+ (xtensa_supply_gregset): LBEG_REGNUM, LEND_REGNUM, LCOUNT_REGNUM,
+ SAR_REGNUM, EXCCAUSE_REGNUM, EXCVADDR_REGNUM
+ (xtensa_register_name, xtensa_register_type, xtensa_reg_to_regnum)
+ (xtensa_pseudo_register_read, xtensa_pseudo_register_write)
+ (xtensa_register_reggroup_p): REGMAP.
+ (call0_track_op): LITBASE_REGNUM.
+ (xtensa_register_type, xtensa_reg_to_regnum, call0_frame_cache):A0_BASE
+ (xtensa_supply_gregset, call0_frame_get_reg_at_entry)
+ (xtensa_frame_prev_register, AREG_NUMBER)
+ (xtensa_register_type): AR_BASE.
+ (xtensa_pseudo_register_read, xtensa_pseudo_register_write): FP_ALIAS.
+ (AREG_NUMBER): AREGS_MASK, WB_MASK, A0_REGNUM.
+ (ARG_1ST, xtensa_pseudo_register_read, xtensa_pseudo_register_write)
+ (xtensa_frame_cache, xtensa_frame_prev_register)
+ (xtensa_extract_return_value, xtensa_store_return_value)
+ (xtensa_push_dummy_call, call0_frame_cache): A0_REGNUM.
+ (xtensa_register_type, xtensa_pseudo_register_read, xtensa_frame_cache)
+ (xtensa_pseudo_register_write, xtensa_unwind_dummy_id)
+ (xtensa_frame_prev_register, xtensa_push_dummy_call)
+ (call0_frame_cache): A1_REGNUM.
+ (xtensa_extract_return_value, xtensa_store_return_value): A2_REGNUM.
+ (xtensa_push_dummy_call): A4_REGNUM.
+ (ARGS_FIRST_REG): A6_REGNUM.
+ (xtensa_pseudo_register_read, xtensa_pseudo_register_write)
+ (xtensa_frame_prev_register): A15_REGNUM.
+ * xtensa-tdep.h: Delete current_gdbarch based macros after replacing
+ them in the appropriate source file:
+ XTENSA_TARGET_FLAGS, SPILL_LOCATION, SPILL_SIZE, CALL_ABI, NUM_AREGS,
+ ISA_USE_WINDOWED_REGISTERS, ISA_USE_DENSITY_INSTRUCTIONS, WB_REGNUM,
+ ISA_USE_EXCEPTIONS, ISA_USE_EXT_L32R, DEBUG_DATA_VADDR_TRAP_COUNT,
+ DEBUG_INST_VADDR_TRAP_COUNT, ISA_MAX_INSN_SIZE, DEBUG_NUM_IBREAKS,
+ DEBUG_NUM_DBREAKS, WS_REGNUM, LBEG_REGNUM, LEND_REGNUM, SAR_REGNUM,
+ REGMAP, LITBASE_REGNUM, DEBUGCAUSE_REGNUM, EXCCAUSE_REGNUM, AR_BASE,
+ EXCVADDR_REGNUM, NUM_IBREAKS, REGMAP_BYTES, NUM_CONTEXTS, FP_ALIAS,
+ FP_LAYOUT, FP_LAYOUT_BYTES, GREGMAP, AREGS_MASK, WB_MASK, A0_REGNUM,
+ A1_REGNUM, A2_REGNUM, A3_REGNUM, A4_REGNUM, A5_REGNUM, A6_REGNUM,
+ A7_REGNUM, A8_REGNUM, A9_REGNUM, A10_REGNUM, A11_REGNUM, A12_REGNUM,
+ A13_REGNUM, A14_REGNUM, A15_REGNUM.
+
+2007-10-09 Markus Deuling <deuling@de.ibm.com>
+
+ * h8300-tdep.c (h8300_frame_cache): Use get_frame_arch to get at
+ the current architecture by frame_info.
+ (h8300_frame_prev_register
+ (h8300_print_register): Replace current_gdbarch by gdbarch.
+ (h8300_print_registers_info, h8300_register_type)
+ (h8300_register_type): Likewise.
+
+2007-10-09 Markus Deuling <deuling@de.ibm.com>
+
+ * i386-linux-nat.c (fetch_register): Use get_regcache_arch to get at
+ the current architecture by regcache.
+ (store_register, supply_gregset, fill_gregset, i386_linux_resume)
+ (i386_linux_fetch_inferior_registers)
+ (i386_linux_store_inferior_registers): Likewise.
+ * i386gnu-nat.c (gnu_fetch_registers, gnu_store_registers): Likewise.
+ * i386-nto-tdep.c (i386nto_supply_gregset): Likewise.
+ * i386v4-nat.c (supply_fpregset, fill_fpregset): Likewise.
+ * i386-tdep.c (i386_unwind_pc): Replace current_gdbarch by gdbarch.
+ (i386_extract_return_value, i386_store_return_value): Likewise.
+ * i386-tdep.c (i386_frame_prev_register): Use get_frame_arch to get at
+ the current architecture by frame_info.
+ (i386_sigtramp_frame_cache, i386_get_longjmp_target)
+ (i386_register_to_value, i386_value_to_register): Likewise.
+
+2007-10-09 Markus Deuling <deuling@de.ibm.com>
+
+ * monitor.c (monitor_supply_register): Use get_regcache_arch to get at
+ the current architecture by regcache.
+ (monitor_store_register, monitor_store_registers): Likewise.
+
+2007-10-09 Markus Deuling <deuling@de.ibm.com>
+
+ * dbug-rom.c (dbug_supply_register): Use get_regcache_arch to get at
+ the current architecture by regcache.
+
+2007-10-09 Markus Deuling <deuling@de.ibm.com>
+
+ * arch-utils.c (legacy_return_value): Replace current_gdbarch by
+ gdbarch.
+
+2007-10-09 Markus Deuling <deuling@de.ibm.com>
+
+ * frame.c (frame_pc_unwind): Use get_frame_arch to get at the current
+ architecture by frame.
+ (frame_save_as_regcache, frame_register_unwind, get_prev_frame_1)
+ (inside_main_func, frame_sp_unwind): Likewise.
+
+2007-10-09 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * solib-svr4.c (enable_break): Add the dynamic linker also if
+ auxv succeeds.
+
+2007-10-09 Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
+
+ * MAINTAINERS (Write After Approval): Add self.
+
+2007-10-09 Pedro Alves <pedro_alves@portugalmail.pt>
+
+ * stabsread.c (read_huge_number): Initialize local variable to 0.
+
+2007-10-09 Pierre Muller <muller@ics.u-strasbg.fr>
+
+ * p-lang.h (pascal_main_name): Add declaration.
+ * p-lang.c (GPC_P_INITIALIZE, GPC_MAIN_PROGRAM_NAME_1)
+ (GPC_MAIN_PROGRAM_NAME_2): New constants.
+ (pascal_main_name): New function.
+ * symtab.c: Include p-lang.h.
+ (find_main_name): Add call to pascal_main_name.
+ * Makefile.in (symtab.o): Add dependency on p-lang.h.
+
+2007-10-09 Pedro Alves <pedro_alves@portugalmail.pt>
+
+ * stabsread.c (read_huge_number): Fix handling of octal
+ representation when the bit width is known.
+ (read_range_type): Record unsigned integral types with their size,
+ when the type size is known.
+
+2007-10-08 Thiago Jung Bauermann <bauerman@br.ibm.com>
+
+ * MAINTAINERS (Write After Approval): Add self.
+
+2007-10-08 Pierre Muller <muller@ics.u-strasbg.fr>
+
+ * breakpoint.c (print_one_breakpoint_location): ARI fix:
+ Replace asprintf by xstrprintf.
+
+2007-10-08 Pierre Muller <muller@ics.u-strasbg.fr>
+
+ * linux-fork.c: ARI fix: include "gdb_dirent.h" instead of <dirent.h>.
+ Makefile.in (linux-fork.o): Add gdb_dirent.h dependency.
+
+2007-10-08 Pierre Muller <muller@ics.u-strasbg.fr>
+
+ * linux-fork.c: Move "gdb_wait.h" include back to the position of
+ <sys/wait.h> include before last commit.
+
+2007-10-08 Maciej W. Rozycki <macro@mips.com>
+
+ * mips-tdep.c (mips32_next_pc): Fix a typo in BGTZL.
+
+2007-10-08 Markus Deuling <deuling@de.ibm.com>
+
+ * aix-thread.c (supply_gprs64, supply_fprs, supply_sprs64)
+ (supply_sprs32, fetch_regs_user_thread, fetch_regs_kernel_thread)
+ (fill_gprs64, fill_gprs32, fill_fprs, fill_sprs64, fill_sprs32)
+ (store_regs_user_thread, store_regs_kernel_thread): Use
+ get_regcache_arch or get_frame_arch to get at the current architecture
+ by regcache or by frame, respectively.
+
+2007-10-08 Markus Deuling <deuling@de.ibm.com>
+
+ * sh64-tdep.c (sh64_push_dummy_call, sh64_register_type)
+ (sh64_pseudo_register_read, sh64_pseudo_register_write)
+ (sh64_do_fp_register, sh64_do_pseudo_register, sh64_do_register)
+ (sh64_print_register, sh64_media_print_registers_info)
+ (sh64_compact_print_registers_info, sh64_unwind_sp)
+ (sh64_unwind_pc): Replace current_gdbarch by gdbarch.
+ (sh64_show_media_regs, sh64_show_compact_regs, sh64_frame_cache)
+ (sh64_frame_prev_register): Use FRAME to recognize current
+ architecture.
+
+2007-10-08 Markus Deuling <deuling@de.ibm.com>
+
+ * sh-tdep.c (sh_push_dummy_call_fpu, sh_push_dummy_call_nofpu)
+ (sh_sh2a_register_type, sh_sh3e_register_type, sh_sh4_register_type)
+ (sh_register_reggroup_p, sh_dwarf2_frame_init_reg): Replace
+ current_gdbarch by gdbarch.
+ (sh_generic_show_regs, sh3_show_reg, sh2e_show_regs, sh2a_show_regs)
+ (sh2a_nofpu_show_regs, sh3e_show_regs, sh3_dsp_show_regs)
+ (sh4_show_regs, sh4_nofpu_show_regs, sh_dsp_show_regs, sh_frame_cache)
+ (sh_frame_prev_register, sh_unwind_sp, sh_unwind_pc): Use FRAME to
+ recognize current architecture.
+
+2007-10-08 Markus Deuling <deuling@de.ibm.com>
+
+ * remote.c (init_remote_state, fetch_register_using_p)
+ (process_g_packet, remote_fetch_registers, remote_prepare_to_store)
+ (store_register_using_P, store_registers_using_G)
+ (remote_store_registers): Use get_regcache_arch or get_frame_arch to
+ get at the current architecture by regcache or by frame, respectively.
+
+2007-10-08 Markus Deuling <deuling@de.ibm.com>
+
+ * m68k-tdep.c (m68k_register_to_value, m68k_value_to_register)
+ (m68k_svr4_extract_return_value, m68k_svr4_store_return_value)
+ (m68k_frame_prev_register, m68k_get_longjmp_target): Use
+ get_regcache_arch or get_frame_arch to get at the current architecture
+ by regcache or by frame, respectively.
+ * m68klinux-tdep.c (m68k_linux_sigtramp_frame_cache): Likewise.
+ * m68klinux-nat.c (fetch_register, old_fetch_inferior_registers)
+ (store_register, old_store_inferior_registers, supply_gregset)
+ (supply_fpregset, fill_fpregset): Likewise.
+ * m68k-tdep.c (m68k_register_type, m68k_unwind_pc, m68k_dump_tdep):
+ Replace current_gdbarch by gdbarch.
+
+2007-10-08 Markus Deuling <deuling@de.ibm.com>
+
+ * irix5-nat.c (supply_gregset, fill_gregset, supply_fpregset)
+ (fill_fpregset, fetch_core_registers): Use get_regcache_arch or
+ get_frame_arch to get at the current architecture by regcache or by
+ frame, respectively.
+
+2007-10-08 Markus Deuling <deuling@de.ibm.com>
+
+ * ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write):
+ Replace current_gdbarch by gdbarch.
+ * ia64-tdep.c (ia64_frame_prev_register
+ (ia64_sigtramp_frame_prev_register)
+ (ia64_libunwind_frame_prev_register): Use get_regcache_arch or
+ get_frame_arch to get at the current architecture by regcache or by
+ frame, respectively.
+ * ia64-linux-nat.c (ia64_linux_fetch_register)
+ (ia64_linux_fetch_registers, ia64_linux_store_register)
+ (ia64_linux_store_registers): Likewise.
+
+2007-10-08 Markus Deuling <deuling@de.ibm.com>
+
+ * hppa-tdep.c (hppa_stub_unwind_sniffer, hppa_dump_tdep): Replace
+ current_gdbarch by gdbarch.
+ * hppa-linux-nat.c (fetch_register, store_register)
+ (hppa_linux_fetch_inferior_registers)
+ (hppa_linux_store_inferior_registers): Use get_regcache_arch or
+ get_frame_arch to get at the current architecture by regcache or by
+ frame, respectively.
+ * hppa-hpux-tdep.c (hppa_hpux_skip_trampoline_code
+ (hppa_hpux_unwind_adjust_stub): Likewise.
+ * hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register)
+ (hppa_hpux_fetch_inferior_registers)
+ (hppa_hpux_store_inferior_registers): Likewise.
+
+2007-10-08 Markus Deuling <deuling@de.ibm.com>
+
+ * cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache)
+ (cris_scan_prologue, crisv32_scan_prologue, find_step_target)
+ (cris_software_single_step, cris_supply_gregset): Use get_regcache_arch
+ or get_frame_arch to get at the current architecture by regcache or by
+ frame, respectively.
+ * cris-tdep.c (crisv32_single_step_through_delay, cris_push_dummy_call)
+ (cris_unwind_pc, cris_unwind_sp, cris_register_type, cris_dump_tdep)
+ (crisv32_register_type, cris_dwarf2_frame_init_reg): Replace
+ current_gdbarch by gdbarch.
+
+2007-10-08 Markus Deuling <deuling@de.ibm.com>
+
+ * arm-tdep.c (arm_scan_prologue, arm_make_prologue_cache)
+ (thumb_get_next_pc, arm_get_next_pc, arm_extract_return_value)
+ (arm_store_return_value): Use get_regcache_arch or get_frame_arch to
+ get at the current architecture by regcache or by·frame, respectively.
+ (arm_push_dummy_call, arm_dump_tdep): Replace current_gdbarch by
+ gdbarch.
+
+2007-10-08 Markus Deuling <deuling@de.ibm.com>
+
+ * amd64-tdep.c (amd64_frame_prev_register, amd64_sigtramp_frame_cache):
+ Use get_regcache_arch or get_frame_arch to get at the current
+ architecture by regcache or by frame, respectively.
+ * amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Likewise.
+ * amd64-nat.c (amd64_supply_native_gregset)
+ (amd64_collect_native_gregset): Replace current_gdbarch by gdbarch.
+
+2007-10-08 Markus Deuling <deuling@de.ibm.com>
+
+ * alpha-tdep.c (alpha_register_reggroup_p): Replace current_gdbarch by
+ gdbarch.
+ * alpha-linux-nat.c (alpha_linux_register_u_offset): Likewise.
+ (alpha_sigtramp_frame_unwind_cache, alpha_sigtramp_frame_this_id)
+ (alpha_sigtramp_frame_sniffer, alpha_next_pc): Use get_regcache_arch or
+ get_frame_arch to get at the current architecture by regcache or by
+ frame, respectively.
+ * alpha-nat.c (fetch_osf_core_registers): Likewise.
+
+2007-10-08 Markus Deuling <deuling@de.ibm.com>
+
+ * dwarf2-frame.c (read_reg, execute_cfa_program, dwarf2_frame_cache)
+ (dwarf2_frame_default_init_reg, dwarf2_frame_prev_register): Replace
+ current_gdbarch by gdbarch.
+ * dwarf2loc.c (dwarf2_evaluate_loc_desc): Likewise.
+
+2007-10-08 Markus Deuling <deuling@de.ibm.com>
+
+ * regcache.c (init_regcache_descr, register_type, read_pc_pid)
+ (write_pc_pid, regcache_dump): Replace current_gdbarch by gdbarch.
+ * regcache.c (regcache_raw_write): Use get_regcache_arch or
+ get_frame_arch to get at the current architecture by regcache or by
+ frame, respectively.
+
+2007-10-08 Markus Deuling <deuling@de.ibm.com>
+
+ * findvar.c (value_of_register, locate_var_value): Use
+ get_regcache_arch or get_frame_arch to get at the current architecture
+ by regcache or by frame, respectively.
+ * findvar.c (default_value_from_register, value_from_register): Replace
+ current_gdbarch by gdbarch.
+
+2007-10-08 Pierre Muller <muller@ics.u-strasbg.fr>
+
+ * config/i386/nm-i386.h (CHILD_POST_STARTUP_INFERIOR): ARI fix: Remove.
+
+2007-10-08 Pierre Muller <muller@ics.u-strasbg.fr>
+
+ * linux-fork.c: ARI fix: include "gdb_wait.h" instead of <sys/wait.h>.
+ Makefile.in (linux-fork.o): Add gdb_wait.h dependency.
+
+2007-10-05 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * remote.c (get_offsets): Only call free_symfile_segment_data if
+ data was allocated.
+
+2007-10-03 Pierre Muller <muller@ics.u-strasbg.fr>
+
+ * objc-exp.y: ARI fix: remove 4 PARAMS.
+
+2007-10-03 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * NEWS: Use uniform spacing. Correct version number for GDB 6.7
+ news. Mention XML support for M68K in GDB 6.7.
+
+2007-10-03 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * gdbtypes.c (create_range_type): Do not set TYPE_FIELD_TYPE for the
+ bounds.
+ (init_vector_type): Use builtin_type_int32.
+
+2007-10-02 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * s390-tdep.c (s390_regset_from_core_section): Allow excess section
+ size to enable bi-arch generate-core-file support.
+
+2007-10-02 Markus Deuling <deuling@de.ibm.com>
+
+ * spu-tdep.c (info_spu_signal_command): Fix output for SPU signal.
+
+2007-10-02 Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
+
+ * tui/tui-interp.c (tui_init): Initialize tui's SIGWINCH
+ signal handler.
+ * tui/tui-win.c (tui_initialize_win): New function for
+ initializing tui's SIGWINCH signal handler.
+ * tui/tui-win.h (tui_initialize_win): Declare.
+
+2007-10-02 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * ppc-linux-nat.c (ppc_linux_stopped_data_address): Cast
+ pointer to uintptr_t before casting to CORE_ADDR.
+
+2007-10-02 Markus Deuling <deuling@de.ibm.com>
+
+ * linux-nat.c (PTRACE_GETSIGINFO): Add define.
+
+2007-10-02 Mark Mitchell <mark@codesourcery.com>
+
+ * mingw-hdep.c (gdb_select): Stop helper threads before returning.
+ * ser-mingw.c (enum select_thread_state): New type.
+ (struct ser_console_state): Add have_started and thread_state.
+ (select_thread_wait): New function.
+ (thread_fn_type): New type.
+ (create_select_thread): New function.
+ (destroy_select_thread): Likewise.
+ (start_select_thread): Likewise.
+ (stop_select_thread): Likewise.
+ (console_select_thread): Use new functions.
+ (pipe_select_thread): Likewise.
+ (file_select_thread): Likewise.
+ (ser_console_wait_handle): Likewise.
+ (ser_console_done_wait_handle): Likewise.
+ (ser_console_close): Likewise.
+ (free_pipe_state): Likewise.
+ (pipe_wait_handle): Likewise.
+ (pipe_done_wait_handle): Likewise.
+ (struct net_windows_state): Derive from ser_console_state.
+ (net_windows_select_thread): Use new functions.
+ (net_windows_wait_handle): Likewise.
+ (net_windows_done_wait_handle): Likewise.
+ (net_windows_close): Likewise.
+
+2007-10-02 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * inflow.c (terminal_ours_1): Remove useless line.
+
+2007-10-02 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * mips-tdep.c (mips_read_fp_register_double): Correct check for
+ odd FP registers.
+ (mips_print_fp_register): Correct check for even FP registers.
+ (mips_virtual_frame_pointer): New function.
+ (mips_gdbarch_init): Call set_gdbarch_virtual_frame_pointer.
+
+2007-09-30 Mike Frysinger <vapier@gentoo.org>
+
+ * value.h (lookup_only_internalvar): New prototype.
+ (create_internalvar): Likewise.
+ * value.c (lookup_only_internalvar): New function.
+ (create_internalvar): Likewise.
+ (lookup_internalvar): Use new lookup_only_internalvar and
+ create_internalvar functions.
+ * parse.c (write_dollar_variable): Look up $ symbols in internal
+ table first rather than last.
+
+2007-09-30 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * linux-nat.c (linux_nat_new_thread): New variable.
+ (linux_child_follow_fork): Set inferior_ptid to include LWP ID. Use
+ linux_nat_switch_fork.
+ (lwp_list): Make public.
+ (add_lwp): Call linux_nat_new_thread.
+ (lin_lwp_attach_lwp, linux_nat_attach): Call add_lwp after stopping
+ the new thread.
+ (resume_callback): Clear lp->siginfo. Remove unused variable.
+ (linux_nat_resume): Assert that the LWP list is already initialized.
+ Clear lp->siginfo.
+ (save_siginfo): New.
+ (stop_wait_callback, linux_nat_wait): Call it.
+ (linux_nat_set_new_thread, linux_nat_get_siginfo): New.
+ * linux-nat.h (struct lwp_info): Add siginfo.
+ (lwp_list, linux_nat_set_new_thread, linux_nat_get_siginfo): Declare.
+ (ALL_LWPS): Define.
+
+ * amd64-linux-nat.c (amd64_linux_dr): New.
+ (amd64_linux_dr_get): Take a PTID argument. Correct typo.
+ (amd64_linux_dr_set): Take a PTID argument.
+ (amd64_linux_dr_set_control, amd64_linux_dr_set_addr): Use ALL_LWPS.
+ (amd64_linux_dr_reset_addr): Use amd64_linux_dr_set_addr.
+ (amd64_linux_dr_get_status): Pass inferior_ptid to amd64_linux_dr_get.
+ (amd64_linux_new_thread): New.
+ (_initialize_amd64_linux_nat): Call linux_nat_set_new_thread.
+ * i386-linux-nat.c (i386_linux_dr): New.
+ (i386_linux_dr_get, i386_linux_dr_set): Take a PTID argument.
+ (i386_linux_dr_set_control, i386_linux_dr_set_addr): Use ALL_LWPS.
+ (i386_linux_dr_reset_addr): Use i386_linux_dr_set_addr.
+ (i386_linux_dr_get_status): Pass inferior_ptid to i386_linux_dr_get.
+ (i386_linux_new_thread): New.
+ (i386_linux_resume): Remove unnecessary PID check.
+ (_initialize_i386_linux_nat): Call linux_nat_set_new_thread.
+ * ia64-linux-nat.c (enable_watchpoints_in_psr): Take PTID argument.
+ (fetch_debug_register, fetch_debug_register_pair): Delete.
+ (debug_registers): New.
+ (ia64_linux_insert_watchpoint, ia64_linux_remove_watchpoint): Use
+ ALL_LWPS and debug_registers.
+ (ia64_linux_new_thread): New.
+ (ia64_linux_stopped_data_address): Use linux_nat_get_siginfo.
+ (_initialize_ia64_linux_nat): Call linux_nat_set_new_thread.
+ * ppc-linux-nat.c (last_stopped_data_address): Delete.
+ (saved_dabr_value): New.
+ (ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint): Use
+ ALL_LWPS.
+ (ppc_linux_new_thread): New.
+ (ppc_linux_stopped_data_address): Use linux_nat_get_siginfo.
+ (ppc_linux_stopped_by_watchpoint): Call ppc_linux_stopped_data_address.
+ (_initialize_ppc_linux_nat): Call linux_nat_set_new_thread.
+ * s390-nat.c (s390_stopped_by_watchpoint): Clear the watchpoint status
+ after reading it.
+ (s390_fix_watch_points): Take a PTID argument.
+ (s390_insert_watchpoint, s390_remove_watchpoint): Use ALL_LWPS.
+ (_initialize_s390_nat): Call linux_nat_set_new_thread.
+
+2007-09-30 Daniel Jacobowitz <dan@codesourcery.com>
+ Jeff Johnston <jjohnstn@redhat.com>
+
+ * breakpoint.c (watchpoints_triggered): New.
+ (bpstat_stop_status): Remove STOPPED_BY_WATCHPOINT argument.
+ Check watchpoint_triggered instead. Combine handling for software
+ and hardware watchpoints. Do not use target_stopped_data_address
+ here. Always check a watchpoint if its scope breakpoint triggers.
+ Do not stop for thread or overlay events. Improve check for
+ triggered watchpoints without a value change.
+ (watch_command_1): Insert the scope breakpoint first. Link the
+ scope breakpoint to the watchpoint.
+ * breakpoint.h (enum watchpoint_triggered): New.
+ (struct breakpoint): Add watchpoint_triggered.
+ (bpstat_stop_status): Update prototype.
+ (watchpoints_triggered): Declare.
+ * infrun.c (enum infwait_status): Add infwait_step_watch_state.
+ (stepped_after_stopped_by_watchpoint): Delete.
+ (handle_inferior_event): Make stepped_after_stopped_by_watchpoint
+ local. Handle infwait_step_watch_state. Update calls to
+ bpstat_stop_status. Use watchpoints_triggered to check
+ watchpoints.
+ * remote.c (stepped_after_stopped_by_watchpoint): Remove extern.
+ (remote_stopped_data_address): Do not check it.
+
+2007-09-29 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * configure.ac: Add $LIBINTL when testing libbfd.
+ * configure: Regenerated.
+
+2007-09-28 Vladimir Prus <vladimir@codesourcery.com>
+
+ * NEW: Mention pending breakpoint changes and
+ support for breakpoints at multiple locations.
+
+2007-09-27 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * arm-linux-tdep.c (arm_linux_software_single_step): New.
+ (arm_linux_init_abi): Use it.
+ * arm-tdep.c (arm_get_next_pc): Make global. Handle all-ones
+ condition correctly.
+ * arm-tdep.h (arm_get_next_pc): Declare.
+ * Makefile.in (arm-linux-tdep.o): Update.
+
+2007-09-26 Vladimir Prus <vladimir@codesourcery.com>
+
+ * varobj.c (install_new_value): Don't
+ call value_get_print_value when a value is
+ lazy. Update the print_value member in a
+ single place.
+
+2007-09-26 Vladimir Prus <vladimir@codesourcery.com>
+
+ * breakpoint.c (create_breakpoint): Set
+ condition on each location, not on the first
+ location of breakpoint.
+
+2007-09-26 Jim Blandy <jimb@codesourcery.com>
+
+ * remote.c (getpkt_sane): Fix error message. No animals were
+ harmed in the making of this debugger.
+
+2007-09-26 Pierre Muller <muller@ics.u-strasbg.fr>
+
+ * p-typeprint.c: Fix 11 ARI reported problems.
+ (pascal_print_type): Fix 4 operator at end of line.
+ (pascal_type_print_method_args) : Replace 2 DEPRECATED_STREQN macros
+ using strncmp function.
+ (pascal_type_print_base): Fix 2 operator at end of line.
+ (pascal_type_print_base) : Replace 3 DEPRECATED_STREQN macros
+ using strncmp function.
+
+
+2007-09-26 Pierre Muller <muller@ics.u-strasbg.fr>
+
+ * Fix PR pascal/2231
+ dwarf2read.c (read_subroutine_type):
+ All pascal functions are prototyped.
+
+2007-09-26 Pierre Muller <muller@ics.u-strasbg.fr>
+
+ * Fix PR pascal/2283
+ p-valprint.c (pascal_val_print): correct current language check.
+ Also print array of char as strings.
+
+
+2007-09-26 David Ung <davidu@mips.com>
+ Maciej W. Rozycki <macro@mips.com>
+
+ * mips-tdep.c (mips_n32n64_return_value): Fix a comment.
+
+2007-09-25 Pierre Muller <muller@ics.u-strasbg.fr>
+
+ * p-exp.y: Fix 12 ARI reported problems.
+ (name_not_typename): Fix 2 operator at end of line issues.
+ (yylex): Fix 3 operator at end of line issues.
+ Replace 7 DEPRECATED_STREQ macros using strcmp function.
+
+2007-09-25 David Ung <davidu@mips.com>
+ Maciej W. Rozycki <macro@mips.com>
+
+ * mips-tdep.c (mips_n32n64_return_value): Per N32/N64 ABI
+ rules return composite types in registers as appropriate.
+
+2007-09-24 Jim Blandy <jimb@codesourcery.com>
+
+ * symfile.h (struct symfile_segment_data): Doc fixes.
+ * symfile.c (symfile_map_offsets_to_segments): Doc fixes.
+ Assert that we were passed some loaded segment addresses,
+ and that sections' segment numbers are valid.
+ Simplify offset calculation.
+ * remote.c (get_offsets): Clarify selection of relocate-by-segment
+ strategy, and set num_segments correctly. Delete redundant
+ assignments to do_sections.
+
+2007-09-24 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * frame.c (get_prev_frame_1): Also check for PC in the same register.
+
+2007-09-24 Vladimir Prus <vladimir@codesourcery.com>
+
+ * breakpoint.c (remove_sal): New.
+ (expand_line_sal_maybe): New.
+ (create_breakpoints): Call expand_line_sal_maybe.
+ (clear_command): Add comment.
+ (breakpoint_re_set_one): Call expand_line_sal_maybe.
+ * linespec.c (decode_indirect): Set explicit_pc to 1.
+ (decode_all_digits): Set explicit_line to 1.
+ (append_expanded_sal): New.
+ (expand_line_sal): New.
+ * linespec.h (expand_line_sal): Declare.
+ * symtab.c (init_sal): Initialize explicit_pc
+ and explicit_line.
+ * symtab.h (struct symtab_and_line): New fields
+ explicit_pc and explicit_line.
+
+2007-09-23 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * infcall.c (call_function_by_hand): Handle language-specific
+ pass and return by reference.
+
+ * cp-abi.c (cp_pass_by_reference): New.
+ * cp-abi.h (cp_pass_by_reference): Declare.
+ (struct cp_abi_ops): Add pass_by_reference.
+ * gnu-v3-abi.c (gnuv3_pass_by_reference): New.
+ (init_gnuv3_ops): Set pass_by_reference.
+
+ * language.c (language_pass_by_reference): New.
+ (default_pass_by_reference): New.
+ (unknown_language_defn, auto_language_defn, local_language_defn): Add
+ default_pass_by_reference.
+ * langauge.h (struct language_defn): Add la_pass_by_reference.
+ (language_pass_by_reference, default_pass_by_reference): Declare.
+ * ada-lang.c (ada_language_defn): Add default_pass_by_reference.
+ * c-lang.c (c_language_defn, asm_language_defn)
+ (minimal_language_defn): Likewise.
+ (cplus_language_defn): Add cp_pass_by_reference.
+ * f-lang.c (f_language_defn): Add default_pass_by_reference.
+ * jv-lang.c (java_language_defn): Likewise.
+ * m2-lang.c (m2_language_defn): Likewise.
+ * objc-lang.c (objc_language_defn): Likewise.
+ * p-lang.c (pascal_language_defn): Likewise.
+ * scm-lang.c (scm_language_defn): Likewise
+
+2007-09-23 Vladimir Prus <vladimir@codesourcery.com>
+
+ Allow a code breakpoint to have several locations
+ associated with it.
+ * breakpoint.h (enum enable_state): Remove the
+ bp_shlib_disabled enumerator.
+ (struct bp_location): New members shlib_disabled,
+ global_next, enabled and function_name.
+ Rename pending to condition_not_parsed.
+
+ * breakpoint.c (ALL_BP_LOCATIONS): Iterate over global_next.
+ (ALL_BP_LOCATIONS_SAFE): Likewise.
+ (breakpoint_enabled): Don't check for pending.
+ (condition_command): Free and update all locations of
+ a breakpoint.
+ (insert_bp_location): Adjust.
+ (software_breakpoint_inserted_here_p): Don't care
+ if breakpoint is enabled, as soon as it's inserted.
+ (print_it_typical): Print bpstat's location, not
+ bpstat's breakpoint's location.
+ (bpstat_stop_status): Iterate over all locations, not
+ all breakpoints.
+ (print_breakpoint_location): New.
+ (print_one_breakpoint): Renamed to
+ (print_one_breakpoint_location): ...this. Take
+ parameters to describe which location is being
+ printed. Modify code to properly print header
+ for several locations and individual locations.
+ (print_one_breakpoint): Print all locations.
+ (breakpoint_has_pc): New.
+ (describe_other_breakpoints): Use the above.
+ (check_duplicates): Renamed to...
+ (check_duplicates_for): .. this.
+ (check_duplicates): Use check_duplicates_for.
+ (allocate_bp_location): Adjust.
+ (set_raw_breakpoint_without_location): New,
+ extracted from set_raw_breakpoint.
+ (set_breakpoint_location_function): New.
+ (set_raw_breakpoint): Use
+ set_raw_breakpoint_without_location.
+ (make_breakpoint_permanent): Mark all locations
+ as inserted.
+ (disable_breakpoints_in_shlibs): Iterate over
+ locations.
+ (disable_breakpoints_in_unloaded_shlib): Likewise.
+ (re_enable_breakpoints_in_shlibs): Likewise.
+ (mention): Say "pending" when breakpoint has
+ zero locations. If breakpoint has more than one
+ location, say so.
+ (add_location_to_breakpoint): New.
+ (create_breakpoint): Accept symtabs_and_lines, not
+ symtab_and_line. Pass extra sals to
+ add_location_to_breakpoint.
+ (create_breakpoints): Pass symtabs_and_lines to
+ create_breakpoints.
+ (break_command_1): Make pending breakpoints
+ have zero locations.
+ (do_captured_breakpoint): Remove wrong allocation.
+ (clear_command): Iterate over all locations.
+ (unlink_locations_from_global_list): Renamed
+ from unlink_location_from_global_list. Remove
+ all locations.
+ (delete_breakpoint): Remove all locations.
+ Iterate over all locations when deciding which
+ other location to re-enable.
+ (all_locations_are_pending): New.
+ (update_breakpoint_locations): Renamed from
+ update_breakpoint_location. Try to match old
+ and new locations using names of containing
+ functions.
+ (breakpoint_re_set_one): Adjust.
+ (find_location_by_number): New.
+ (disable_command): Allow disabling individual location.
+ (enable_command): Allow enabling individual location.
+ * breakpoint.c: Adjust all uses of breakpoint's
+ enable state to for bp_shlib_disabled change.
+
+2007-09-22 Vladimir Prus <vladimir@codesourcery.com>
+
+ * breakpoint.c (do_restore_lang_radix_cleanup): Remove.
+ (resolve_pending_breakpoint): Remove.
+ (re_enable_breakpoints_in_shlibs): Remove.
+ (unlink_locations_from_global_list): New.
+ (update_breakpoint_locations): New.
+ (breakpoint_re_set_one): Don't bail out on pending breakpoints.
+ Use parse_condition and update_breakpoint_location to
+ reset breakpoint. Ignore 'symbol not found' error from
+ decode_line_1.
+ (breakpoint_re_set): Don't emit newline before the
+ reason why breakpoint is not reset.
+ (do_enable_breakpoint): Don't specially process pending
+ breakpoints.
+ (free_bp_location): New.
+ (break_command_1): For pending breakpoints, initialize
+ all fields of a sal with zeroes.
+ * breakpoint.h (re_enable_breakpoints_in_shlibs): Remove.
+ * infcmd.c (post_create_inferior): Don't call
+ re_enable_breakpoints_in_shlibs.
+ * infrun.c (handle_inferior_event): Likewise.
+ * solib-irix.c (irix_solib_create_inferior_hook): Likewise.
+ * solib-osf.c (osf_solib_create_inferior_hook): Likewise.
+ * win32-nat.c (get_win32_debug_event): Likewise.
+
+2007-09-22 Vladimir Prus <vladimir@codesourcery.com>
+
+ * breakpoint.c (create_breakpoint): Split from
+ create_breakpoints, implementing most of its logic.
+ Take just a single sal, single address string and
+ single condition. Do not take parsed condition at
+ all.
+ (create_breakpoints): Just call create_breakpoint
+ for each sal.
+ (find_condition_and_thread): New.
+ (break_command_1): Use find_condition_and_thread.
+ Do not keep parsed conditions.
+ (do_captured_breakpoint): Don't convert
+ condition string to struct expression.
+
+2007-09-22 Vladimir Prus <vladimir@codesourcery.com>
+
+ * breakpoint.h (struct breakpoint): Move the cond
+ field to...
+ (struct bp_location): Here.
+ * breakpoint.c (condition_command, bpstat_stop_status)
+ (print_one_breakpoint, allocate_bp_location)
+ (solib_load_unload_1, create_fork_vfork_event_catchpoint)
+ (create_exec_event_catchpoint, create_breakpoints)
+ (break_command_1, watch_command_1, handle_gnu_v3_exceptions)
+ (create_ada_exception_breakpoint, set_breakpoint_sal)
+ (delete_breakpoint, breakpoint_re_set_one): Adjust.
+ * tui/tui-winsource.c (tui_update_breakpoint_info): Adjust.
+
+2007-09-22 Vladimir Prus <vladimir@codesourcery.com>
+
+ Associate bp_stat with bp_location, not breakpoint.
+ * breakpoint.h (breakpoint_at): Change type
+ to bp_location*.
+ * breakpoint.c (bpstat_alloc): Take bp_location,
+ not breakpoint.
+ (bpstat_find_breakpoint): Look at bpstat's location's
+ owner, not at bpstat->breakpoint_at.
+ (bpstat_find_step_resume_breakpoint): Likewise.
+ (bpstat_num): Likewise.
+ (print_it_typical): Likewise.
+ (print_bp_stop_message): Likewise.
+ (watchpoint_check): Likewise.
+ (bpstat_what): Likewise.
+ (bpstat_get_triggered_catchpoints): Likewise.
+ (breakpoint_auto_delete): Likewise.
+ (delete_breakpoint): Likewise.
+ (bpstat_stop_status): Pass location, not breakpoint,
+ to bpstat_alloc. Look at bpstat's location's
+ owner, not at bpstat->breakpoint_at.
+
+2007-09-21 Jim Blandy <jimb@codesourcery.com>
+
+ * macrotab.h (new_macro_table): Document that removing information
+ from an obstack/bcache-managed macro table leaks memory.
+ * macrotab.c (macro_free, macro_bcache_free): Instead of asserting
+ that data is never freed in obstack/bcache-managed macro tables,
+ just leak the storage.
+ (macro_undef): If we're undefining a macro at exactly the same
+ source location that we defined it, simply remove the definition
+ altogether.
+
+2007-09-21 Joel Brobecker <brobecker@adacore.com>
+
+ * symfile.h (struct sym_fns): Add new field sym_read_linetable.
+ * coffread.c, dbxread.c, elfread.c, mipsread.c somread.c:
+ Adjust the struct sym_fns object accordingly by setting
+ the new field to NULL.
+ * xcoffread.c (aix_process_linenos): Make static.
+ (xcoff_sym_fns): Set new field to aix_process_linenos.
+ * buildsym.c (end_symtab): Replace call to PROCESS_LINENUMBER_HOOK
+ by call to new the new sym_fns sym_read_linetable function.
+ * config/powerpc/aix.mt (DEPRECATED_TM_FILE): Delete.
+ * config/rs6000/tm-rs6000.h: Delete.
+
+2007-09-21 David Ung <davidu@mips.com>
+ Maciej W. Rozycki <macro@mips.com>
+
+ * mips-tdep.c (mips_n32n64_push_dummy_call): Per N32/N64 ABI
+ rules do not treat composite types specially.
+
+2007-09-20 Maciej W. Rozycki <macro@mips.com>
+
+ * mips-tdep.c (mips32_in_function_epilogue_p): New function.
+ (mips16_in_function_epilogue_p): Likewise.
+ (mips_in_function_epilogue_p): Likewise.
+ (mips_gdbarch_init): Register mips_in_function_epilogue_p().
+
+2007-09-19 Joel Brobecker <brobecker@adacore.com>
+
+ * configure.ac: Add check for "etext".
+ * configure, config.in: Regenerate.
+ * maint.c (TEXTEND): Only define if either _etext or etext
+ are available.
+ Disable the profiling functionality if TEXTEND is not defined.
+
+2007-09-19 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * mips-tdep.c (mips_stub_frame_cache): Correct the saved return
+ address register. Correct the call to frame_id_build.
+ (mips_stub_frame_sniffer): Use the stub unwinder when the PC
+ is invalid.
+
+2007-09-18 Joel Brobecker <brobecker@adacore.com>
+
+ * ia64-tdep.c (refine_prologue_limit): Make sure we don't scan
+ the linetable past the function end.
+
2007-09-18 James E. Wilson <wilson@specifix.com>
* MAINTAINERS: Update my email address.
* gdbthread.h (switch_to_thread): Add prototype.
* thread.c (switch_to_thread): Make global.
-2007-09-07 2007-09-07 Pierre Muller <muller@ics.u-strasbg.fr>
+2007-09-07 Pierre Muller <muller@ics.u-strasbg.fr>
* p-valprint.c: Fix 7 ARI reported problems.
(pascal_val_print): Fix one operator at end of line issue.