What has changed in GDB?
(Organized release by release)
-*** Changes since GDB 6.8
+*** Changes since GDB 7.1
+
+* Windows Thread Information Block access.
+
+ On Windows targets, GDB now supports displaying the Windows Thread
+ Information Block (TIB) structure. This structure is visible either
+ by using the new command `info w32 thread-information-block' or, by
+ dereferencing the new convenience variable named `$_tlb', a
+ thread-specific pointer to the TIB. This feature is also supported
+ when remote debugging using GDBserver.
+
+* New remote packets
+
+qGetTIBAddr
+
+ Return the address of the Windows Thread Information Block of a given thread.
+
+* The source command now accepts a -s option to force searching for the
+ script in the source search path even if the script name specifies
+ a directory.
+
+* New features in the GDB remote stub, GDBserver
+
+ - GDBserver now support tracepoints. The feature is currently
+ supported by the i386-linux and amd64-linux builds.
+
+ - GDBserver now supports x86_64 Windows 64-bit debugging.
+
+* GDB now sends xmlRegisters= in qSupported packet to indicate that
+ it understands register description.
+
+* The --batch flag now disables pagination and queries.
+
+* X86 general purpose registers
+
+ GDB now supports reading/writing byte, word and double-word x86
+ general purpose registers directly. This means you can use, say,
+ $ah or $ax to refer, respectively, to the byte register AH and
+ 16-bit word register AX that are actually portions of the 32-bit
+ register EAX or 64-bit register RAX.
+
+* The `commands' command now accepts a range of breakpoints to modify.
+ A plain `commands' following a command that creates multiple
+ breakpoints affects all the breakpoints set by that command. This
+ applies to breakpoints set by `rbreak', and also applies when a
+ single `break' command creates multiple breakpoints (e.g.,
+ breakpoints on overloaded c++ functions).
+
+* The `rbreak' command now accepts a filename specification as part of
+ its argument, limiting the functions selected by the regex to those
+ in the specified file.
+
+* Support for remote debugging Windows and SymbianOS shared libraries
+ from Unix hosts has been improved. Non Windows GDB builds now can
+ understand target reported file names that follow MS-DOS based file
+ system semantics, such as file names that include drive letters and
+ use the backslash character as directory separator. This makes it
+ possible to transparently use the "set sysroot" and "set
+ solib-search-path" on Unix hosts to point as host copies of the
+ target's shared libraries. See the new command "set
+ target-file-system-kind" described below, and the "Commands to
+ specify files" section in the user manual for more information.
+
+* New commands
+
+set target-file-system-kind unix|dos-based|auto
+show target-file-system-kind
+ Set or show the assumed file system kind for target reported file
+ names.
+
+save breakpoints <filename>
+ Save all current breakpoint definitions to a file suitable for use
+ in a later debugging session. To read the saved breakpoint
+ definitions, use the `source' command.
+
+`save tracepoints' is a new alias for `save-tracepoints'. The latter
+is now deprecated.
+
+* Python scripting
+
+** The GDB Python API now has access to breakpoints, symbols, symbol
+ tables, program spaces, and frame's code blocks. Additionally, GDB
+ Parameters can now be created from the API, and manipulated via
+ set/show in the CLI.
+
+** New functions gdb.target_charset, gdb.target_wide_charset,
+ gdb.progspaces, and gdb.current_progspace.
+
+** Pretty-printers are now also looked up in the current program space.
+
+** GDB now looks for names of Python scripts to auto-load in a
+ special section named `.debug_gdb_scripts', in addition to looking
+ for a OBJFILE-gdb.py script when OBJFILE is read by the debugger.
+
+* Tracepoint actions were unified with breakpoint commands. In particular,
+there are no longer differences in "info break" output for breakpoints and
+tracepoints and the "commands" command can be used for both tracepoints and
+regular breakpoints.
+
+* New targets
+
+ARM Symbian arm*-*-symbianelf*
+
+* D language support.
+ GDB now supports debugging programs written in the D programming
+ language.
+
+*** Changes in GDB 7.1
+
+* C++ Improvements
+
+ ** Namespace Support
+
+ GDB now supports importing of namespaces in C++. This enables the
+ user to inspect variables from imported namespaces. Support for
+ namepace aliasing has also been added. So, if a namespace is
+ aliased in the current scope (e.g. namepace C=A; ) the user can
+ print variables using the alias (e.g. (gdb) print C::x).
+
+ ** Bug Fixes
+
+ All known bugs relating to the printing of virtual base class were
+ fixed. It is now possible to call overloaded static methods using a
+ qualified name.
+
+ ** Cast Operators
+
+ The C++ cast operators static_cast<>, dynamic_cast<>, const_cast<>,
+ and reinterpret_cast<> are now handled by the C++ expression parser.
+
+* New targets
+
+Xilinx MicroBlaze microblaze-*-*
+Renesas RX rx-*-elf
+
+* New Simulators
+
+Xilinx MicroBlaze microblaze
+Renesas RX rx
+
+* Multi-program debugging.
+
+ GDB now has support for multi-program (a.k.a. multi-executable or
+ multi-exec) debugging. This allows for debugging multiple inferiors
+ simultaneously each running a different program under the same GDB
+ session. See "Debugging Multiple Inferiors and Programs" in the
+ manual for more information. This implied some user visible changes
+ in the multi-inferior support. For example, "info inferiors" now
+ lists inferiors that are not running yet or that have exited
+ already. See also "New commands" and "New options" below.
+
+* New tracing features
+
+ GDB's tracepoint facility now includes several new features:
+
+ ** Trace state variables
+
+ GDB tracepoints now include support for trace state variables, which
+ are variables managed by the target agent during a tracing
+ experiment. They are useful for tracepoints that trigger each
+ other, so for instance one tracepoint can count hits in a variable,
+ and then a second tracepoint has a condition that is true when the
+ count reaches a particular value. Trace state variables share the
+ $-syntax of GDB convenience variables, and can appear in both
+ tracepoint actions and condition expressions. Use the "tvariable"
+ command to create, and "info tvariables" to view; see "Trace State
+ Variables" in the manual for more detail.
+
+ ** Fast tracepoints
+
+ GDB now includes an option for defining fast tracepoints, which
+ targets may implement more efficiently, such as by installing a jump
+ into the target agent rather than a trap instruction. The resulting
+ speedup can be by two orders of magnitude or more, although the
+ tradeoff is that some program locations on some target architectures
+ might not allow fast tracepoint installation, for instance if the
+ instruction to be replaced is shorter than the jump. To request a
+ fast tracepoint, use the "ftrace" command, with syntax identical to
+ the regular trace command.
+
+ ** Disconnected tracing
+
+ It is now possible to detach GDB from the target while it is running
+ a trace experiment, then reconnect later to see how the experiment
+ is going. In addition, a new variable disconnected-tracing lets you
+ tell the target agent whether to continue running a trace if the
+ connection is lost unexpectedly.
+
+ ** Trace files
+
+ GDB now has the ability to save the trace buffer into a file, and
+ then use that file as a target, similarly to you can do with
+ corefiles. You can select trace frames, print data that was
+ collected in them, and use tstatus to display the state of the
+ tracing run at the moment that it was saved. To create a trace
+ file, use "tsave <filename>", and to use it, do "target tfile
+ <name>".
+
+ ** Circular trace buffer
+
+ You can ask the target agent to handle the trace buffer as a
+ circular buffer, discarding the oldest trace frames to make room for
+ newer ones, by setting circular-trace-buffer to on. This feature may
+ not be available for all target agents.
+
+* Changed commands
+
+disassemble
+ The disassemble command, when invoked with two arguments, now requires
+ the arguments to be comma-separated.
+
+info variables
+ The info variables command now displays variable definitions. Files
+ which only declare a variable are not shown.
+
+source
+ The source command is now capable of sourcing Python scripts.
+ This feature is dependent on the debugger being build with Python
+ support.
+
+ Related to this enhancement is also the introduction of a new command
+ "set script-extension" (see below).
+
+* New commands (for set/show, see "New options" below)
+
+record save [<FILENAME>]
+ Save a file (in core file format) containing the process record
+ execution log for replay debugging at a later time.
+
+record restore <FILENAME>
+ Restore the process record execution log that was saved at an
+ earlier time, for replay debugging.
+
+add-inferior [-copies <N>] [-exec <FILENAME>]
+ Add a new inferior.
+
+clone-inferior [-copies <N>] [ID]
+ Make a new inferior ready to execute the same program another
+ inferior has loaded.
+
+remove-inferior ID
+ Remove an inferior.
+
+maint info program-spaces
+ List the program spaces loaded into GDB.
+
+set remote interrupt-sequence [Ctrl-C | BREAK | BREAK-g]
+show remote interrupt-sequence
+ Allow the user to select one of ^C, a BREAK signal or BREAK-g
+ as the sequence to the remote target in order to interrupt the execution.
+ Ctrl-C is a default. Some system prefers BREAK which is high level of
+ serial line for some certain time. Linux kernel prefers BREAK-g, a.k.a
+ Magic SysRq g. It is BREAK signal and character 'g'.
+
+set remote interrupt-on-connect [on | off]
+show remote interrupt-on-connect
+ When interrupt-on-connect is ON, gdb sends interrupt-sequence to
+ remote target when gdb connects to it. This is needed when you debug
+ Linux kernel.
+
+set remotebreak [on | off]
+show remotebreak
+Deprecated. Use "set/show remote interrupt-sequence" instead.
+
+tvariable $NAME [ = EXP ]
+ Create or modify a trace state variable.
+
+info tvariables
+ List trace state variables and their values.
+
+delete tvariable $NAME ...
+ Delete one or more trace state variables.
+
+teval EXPR, ...
+ Evaluate the given expressions without collecting anything into the
+ trace buffer. (Valid in tracepoint actions only.)
+
+ftrace FN / FILE:LINE / *ADDR
+ Define a fast tracepoint at the given function, line, or address.
+
+* New expression syntax
+
+ GDB now parses the 0b prefix of binary numbers the same way as GCC does.
+ GDB now parses 0b101010 identically with 42.
+
+* New options
+
+set follow-exec-mode new|same
+show follow-exec-mode
+ Control whether GDB reuses the same inferior across an exec call or
+ creates a new one. This is useful to be able to restart the old
+ executable after the inferior having done an exec call.
+
+set default-collect EXPR, ...
+show default-collect
+ Define a list of expressions to be collected at each tracepoint.
+ This is a useful way to ensure essential items are not overlooked,
+ such as registers or a critical global variable.
+
+set disconnected-tracing
+show disconnected-tracing
+ If set to 1, the target is instructed to continue tracing if it
+ loses its connection to GDB. If 0, the target is to stop tracing
+ upon disconnection.
+
+set circular-trace-buffer
+show circular-trace-buffer
+ If set to on, the target is instructed to use a circular trace buffer
+ and discard the oldest trace frames instead of stopping the trace due
+ to a full trace buffer. If set to off, the trace stops when the buffer
+ fills up. Some targets may not support this.
+
+set script-extension off|soft|strict
+show script-extension
+ If set to "off", the debugger does not perform any script language
+ recognition, and all sourced files are assumed to be GDB scripts.
+ If set to "soft" (the default), files are sourced according to
+ filename extension, falling back to GDB scripts if the first
+ evaluation failed.
+ If set to "strict", files are sourced according to filename extension.
+
+set ada trust-PAD-over-XVS on|off
+show ada trust-PAD-over-XVS
+ If off, activate a workaround against a bug in the debugging information
+ generated by the compiler for PAD types (see gcc/exp_dbug.ads in
+ the GCC sources for more information about the GNAT encoding and
+ PAD types in particular). It is always safe to set this option to
+ off, but this introduces a slight performance penalty. The default
+ is on.
+
+* Python API Improvements
+
+ ** GDB provides the new class gdb.LazyString. This is useful in
+ some pretty-printing cases. The new method gdb.Value.lazy_string
+ provides a simple way to create objects of this type.
+
+ ** The fields returned by gdb.Type.fields now have an
+ `is_base_class' attribute.
+
+ ** The new method gdb.Type.range returns the range of an array type.
+
+ ** The new method gdb.parse_and_eval can be used to parse and
+ evaluate an expression.
+
+* New remote packets
+
+QTDV
+ Define a trace state variable.
+
+qTV
+ Get the current value of a trace state variable.
+
+QTDisconnected
+ Set desired tracing behavior upon disconnection.
+
+QTBuffer:circular
+ Set the trace buffer to be linear or circular.
+
+qTfP, qTsP
+ Get data about the tracepoints currently in use.
+
+* Bug fixes
+
+Process record now works correctly with hardware watchpoints.
+
+Multiple bug fixes have been made to the mips-irix port, making it
+much more reliable. In particular:
+ - Debugging threaded applications is now possible again. Previously,
+ GDB would hang while starting the program, or while waiting for
+ the program to stop at a breakpoint.
+ - Attaching to a running process no longer hangs.
+ - An error occurring while loading a core file has been fixed.
+ - Changing the value of the PC register now works again. This fixes
+ problems observed when using the "jump" command, or when calling
+ a function from GDB, or even when assigning a new value to $pc.
+ - With the "finish" and "return" commands, the return value for functions
+ returning a small array is now correctly printed.
+ - It is now possible to break on shared library code which gets executed
+ during a shared library init phase (code executed while executing
+ their .init section). Previously, the breakpoint would have no effect.
+ - GDB is now able to backtrace through the signal handler for
+ non-threaded programs.
+
+PIE (Position Independent Executable) programs debugging is now supported.
+This includes debugging execution of PIC (Position Independent Code) shared
+libraries although for that, it should be possible to run such libraries as an
+executable program.
+
+*** Changes in GDB 7.0
+
+* GDB now has an interface for JIT compilation. Applications that
+dynamically generate code can create symbol files in memory and register
+them with GDB. For users, the feature should work transparently, and
+for JIT developers, the interface is documented in the GDB manual in the
+"JIT Compilation Interface" chapter.
+
+* Tracepoints may now be conditional. The syntax is as for
+breakpoints; either an "if" clause appended to the "trace" command,
+or the "condition" command is available. GDB sends the condition to
+the target for evaluation using the same bytecode format as is used
+for tracepoint actions.
+
+* "disassemble" command with a /r modifier, print the raw instructions
+in hex as well as in symbolic form.
+
+* Process record and replay
+
+ In a architecture environment that supports ``process record and
+ replay'', ``process record and replay'' target can record a log of
+ the process execution, and replay it with both forward and reverse
+ execute commands.
+
+* Reverse debugging: GDB now has new commands reverse-continue, reverse-
+step, reverse-next, reverse-finish, reverse-stepi, reverse-nexti, and
+set execution-direction {forward|reverse}, for targets that support
+reverse execution.
+
+* GDB now supports hardware watchpoints on MIPS/Linux systems. This
+feature is available with a native GDB running on kernel version
+2.6.28 or later.
+
+* GDB now has support for multi-byte and wide character sets on the
+target. Strings whose character type is wchar_t, char16_t, or
+char32_t are now correctly printed. GDB supports wide- and unicode-
+literals in C, that is, L'x', L"string", u'x', u"string", U'x', and
+U"string" syntax. And, GDB allows the "%ls" and "%lc" formats in
+`printf'. This feature requires iconv to work properly; if your
+system does not have a working iconv, GDB can use GNU libiconv. See
+the installation instructions for more information.
+
+* GDB now supports automatic retrieval of shared library files from
+remote targets. To use this feature, specify a system root that begins
+with the `remote:' prefix, either via the `set sysroot' command or via
+the `--with-sysroot' configure-time option.
+
+* "info sharedlibrary" now takes an optional regex of libraries to show,
+and it now reports if a shared library has no debugging information.
* Commands `set debug-file-directory', `set solib-search-path' and `set args'
now complete on file names.
If the user types TAB at the end of this command line, the available
completions will be "f1" and "f2".
+* Inlined functions are now supported. They show up in backtraces, and
+the "step", "next", and "finish" commands handle them automatically.
+
+* GDB now supports the token-splicing (##) and stringification (#)
+operators when expanding macros. It also supports variable-arity
+macros.
+
+* GDB now supports inspecting extra signal information, exported by
+the new $_siginfo convenience variable. The feature is currently
+implemented on linux ARM, i386 and amd64.
+
+* GDB can now display the VFP floating point registers and NEON vector
+registers on ARM targets. Both ARM GNU/Linux native GDB and gdbserver
+can provide these registers (requires Linux 2.6.30 or later). Remote
+and simulator targets may also provide them.
+
* New remote packets
qSearch:memory:
operation over reliable transport links. Use of this packet is
controlled by the `set remote noack-packet' command.
+vKill
+ Kill the process with the specified process ID. Use this in preference
+ to `k' when multiprocess protocol extensions are supported.
+
+qXfer:osdata:read
+ Obtains additional operating system information
+
+qXfer:siginfo:read
+qXfer:siginfo:write
+ Read or write additional signal information.
+
* Removed remote protocol undocumented extension
An undocumented extension to the remote protocol's `S' stop reply
* 64-bit core files are now supported on AIX.
+* Thread switching is now supported on Tru64.
+
* Watchpoints can now be set on unreadable memory locations, e.g. addresses
which will be allocated using malloc later in program execution.
From the user's standpoint, all unqualified instances of True and False
are treated as the standard definitions, regardless of context.
+* GDB now parses C++ symbol and type names more flexibly. For
+example, given:
+
+ template<typename T> class C { };
+ C<char const *> c;
+
+GDB will now correctly handle all of:
+
+ ptype C<char const *>
+ ptype C<char const*>
+ ptype C<const char *>
+ ptype C<const char*>
+
* New features in the GDB remote stub, gdbserver
- The "--wrapper" command-line argument tells gdbserver to use a
- gdbserver uses the new noack protocol mode for TCP connections to
reduce communications latency, if also supported and enabled in GDB.
+ - Support for the sparc64-linux-gnu target is now included in
+ gdbserver.
+
+ - The amd64-linux build of gdbserver now supports debugging both
+ 32-bit and 64-bit programs.
+
+ - The i386-linux, amd64-linux, and i386-win32 builds of gdbserver
+ now support hardware watchpoints, and will use them automatically
+ as appropriate.
+
* Python scripting
GDB now has support for scripting using Python. Whether this is
available is determined at configure time.
-* New commands
+ New GDB commands can now be written in Python.
+
+* Ada tasking support
+
+ Ada tasks can now be inspected in GDB. The following commands have
+ been introduced:
+
+ info tasks
+ Print the list of Ada tasks.
+ info task N
+ Print detailed information about task number N.
+ task
+ Print the task number of the current task.
+ task N
+ Switch the context of debugging to task number N.
+
+* Support for user-defined prefixed commands. The "define" command can
+add new commands to existing prefixes, e.g. "target".
+
+* Multi-inferior, multi-process debugging.
+
+ GDB now has generalized support for multi-inferior debugging. See
+ "Debugging Multiple Inferiors" in the manual for more information.
+ Although availability still depends on target support, the command
+ set is more uniform now. The GNU/Linux specific multi-forks support
+ has been migrated to this new framework. This implied some user
+ visible changes; see "New commands" and also "Removed commands"
+ below.
+
+* Target descriptions can now describe the target OS ABI. See the
+"Target Description Format" section in the user manual for more
+information.
+
+* Target descriptions can now describe "compatible" architectures
+to indicate that the target can execute applications for a different
+architecture in addition to those for the main target architecture.
+See the "Target Description Format" section in the user manual for
+more information.
+
+* Multi-architecture debugging.
+
+ GDB now includes general supports for debugging applications on
+ hybrid systems that use more than one single processor architecture
+ at the same time. Each such hybrid architecture still requires
+ specific support to be added. The only hybrid architecture supported
+ in this version of GDB is the Cell Broadband Engine.
+
+* GDB now supports integrated debugging of Cell/B.E. applications that
+use both the PPU and SPU architectures. To enable support for hybrid
+Cell/B.E. debugging, you need to configure GDB to support both the
+powerpc-linux or powerpc64-linux and the spu-elf targets, using the
+--enable-targets configure option.
+
+* Non-stop mode debugging.
+
+ For some targets, GDB now supports an optional mode of operation in
+ which you can examine stopped threads while other threads continue
+ to execute freely. This is referred to as non-stop mode, with the
+ old mode referred to as all-stop mode. See the "Non-Stop Mode"
+ section in the user manual for more information.
+
+ To be able to support remote non-stop debugging, a remote stub needs
+ to implement the non-stop mode remote protocol extensions, as
+ described in the "Remote Non-Stop" section of the user manual. The
+ GDB remote stub, gdbserver, has been adjusted to support these
+ extensions on linux targets.
+
+* New commands (for set/show, see "New options" below)
+
+catch syscall [NAME(S) | NUMBER(S)]
+ Catch system calls. Arguments, which should be names of system
+ calls or their numbers, mean catch only those syscalls. Without
+ arguments, every syscall will be caught. When the inferior issues
+ any of the specified syscalls, GDB will stop and announce the system
+ call, both when it is called and when its call returns. This
+ feature is currently available with a native GDB running on the
+ Linux Kernel, under the following architectures: x86, x86_64,
+ PowerPC and PowerPC64.
find [/size-char] [/max-count] start-address, end-address|+search-space-size,
val1 [, val2, ...]
python [CODE]
Invoke CODE by passing it to the Python interpreter.
-set print symbol-loading
-show print symbol-loading
- Control printing of symbol loading messages.
+macro define
+macro list
+macro undef
+ These allow macros to be defined, undefined, and listed
+ interactively.
+
+info os processes
+ Show operating system information about processes.
+
+info inferiors
+ List the inferiors currently under GDB's control.
+
+inferior NUM
+ Switch focus to inferior number NUM.
+
+detach inferior NUM
+ Detach from inferior number NUM.
+
+kill inferior NUM
+ Kill inferior number NUM.
+
+* New options
+
+set spu stop-on-load
+show spu stop-on-load
+ Control whether to stop for new SPE threads during Cell/B.E. debugging.
+
+set spu auto-flush-cache
+show spu auto-flush-cache
+ Control whether to automatically flush the software-managed cache
+ during Cell/B.E. debugging.
+
+set sh calling-convention
+show sh calling-convention
+ Control the calling convention used when calling SH target functions.
set debug timestamp
show debug timestamp
- Display timestamps with GDB debugging output.
+ Control display of timestamps with GDB debugging output.
+
+set disassemble-next-line
+show disassemble-next-line
+ Control display of disassembled source lines or instructions when
+ the debuggee stops.
+
+set remote noack-packet
+show remote noack-packet
+ Set/show the use of remote protocol QStartNoAckMode packet. See above
+ under "New remote packets."
+
+set remote query-attached-packet
+show remote query-attached-packet
+ Control use of remote protocol `qAttached' (query-attached) packet.
+
+set remote read-siginfo-object
+show remote read-siginfo-object
+ Control use of remote protocol `qXfer:siginfo:read' (read-siginfo-object)
+ packet.
+
+set remote write-siginfo-object
+show remote write-siginfo-object
+ Control use of remote protocol `qXfer:siginfo:write' (write-siginfo-object)
+ packet.
+
+set remote reverse-continue
+show remote reverse-continue
+ Control use of remote protocol 'bc' (reverse-continue) packet.
+
+set remote reverse-step
+show remote reverse-step
+ Control use of remote protocol 'bs' (reverse-step) packet.
+
+set displaced-stepping
+show displaced-stepping
+ Control displaced stepping mode. Displaced stepping is a way to
+ single-step over breakpoints without removing them from the debuggee.
+ Also known as "out-of-line single-stepping".
+
+set debug displaced
+show debug displaced
+ Control display of debugging info for displaced stepping.
+
+maint set internal-error
+maint show internal-error
+ Control what GDB does when an internal error is detected.
+
+maint set internal-warning
+maint show internal-warning
+ Control what GDB does when an internal warning is detected.
set exec-wrapper
show exec-wrapper
by default on some platforms. This option keeps the addresses stable across
multiple debugging sessions.
+set non-stop
+show non-stop
+ Control whether other threads are stopped or not when some thread hits
+ a breakpoint.
+
set target-async
+show target-async
Requests that asynchronous execution is enabled in the target, if available.
In this case, it's possible to resume target in the background, and interact
with GDB while the target is running. "show target-async" displays the
current state of asynchronous execution of the target.
-macro define
-macro list
-macro undef
- These allow macros to be defined, undefined, and listed
- interactively.
+set target-wide-charset
+show target-wide-charset
+ The target-wide-charset is the name of the character set that GDB
+ uses when printing characters whose type is wchar_t.
+
+set tcp auto-retry (on|off)
+show tcp auto-retry
+set tcp connect-timeout
+show tcp connect-timeout
+ These commands allow GDB to retry failed TCP connections to a remote stub
+ with a specified timeout period; this is useful if the stub is launched
+ in parallel with GDB but may not be ready to accept connections immediately.
+
+set libthread-db-search-path
+show libthread-db-search-path
+ Control list of directories which GDB will search for appropriate
+ libthread_db.
+
+set schedule-multiple (on|off)
+show schedule-multiple
+ Allow GDB to resume all threads of all processes or only threads of
+ the current process.
+
+set stack-cache
+show stack-cache
+ Use more aggressive caching for accesses to the stack. This improves
+ performance of remote debugging (particularly backtraces) without
+ affecting correctness.
+
+set interactive-mode (on|off|auto)
+show interactive-mode
+ Control whether GDB runs in interactive mode (on) or not (off).
+ When in interactive mode, GDB waits for the user to answer all
+ queries. Otherwise, GDB does not wait and assumes the default
+ answer. When set to auto (the default), GDB determines which
+ mode to use based on the stdin settings.
+
+* Removed commands
+
+info forks
+ For program forks, this is replaced by the new more generic `info
+ inferiors' command. To list checkpoints, you can still use the
+ `info checkpoints' command, which was an alias for the `info forks'
+ command.
+
+fork NUM
+ Replaced by the new `inferior' command. To switch between
+ checkpoints, you can still use the `restart' command, which was an
+ alias for the `fork' command.
+
+process PID
+ This is removed, since some targets don't have a notion of
+ processes. To switch between processes, you can still use the
+ `inferior' command using GDB's own inferior number.
+
+delete fork NUM
+ For program forks, this is replaced by the new more generic `kill
+ inferior' command. To delete a checkpoint, you can still use the
+ `delete checkpoint' command, which was an alias for the `delete
+ fork' command.
+
+detach fork NUM
+ For program forks, this is replaced by the new more generic `detach
+ inferior' command. To detach a checkpoint, you can still use the
+ `detach checkpoint' command, which was an alias for the `detach
+ fork' command.
+
+* New native configurations
+
+x86/x86_64 Darwin i[34567]86-*-darwin*
+
+x86_64 MinGW x86_64-*-mingw*
* New targets
+Lattice Mico32 lm32-*
x86 DICOS i[34567]86-*-dicos*
+x86_64 DICOS x86_64-*-dicos*
+S+core 3 score-*-*
+
+* The GDB remote stub, gdbserver, now supports x86 Windows CE
+ (mingw32ce) debugging.
+
+* Removed commands
+
+catch load
+catch unload
+ These commands were actually not implemented on any target.
*** Changes in GDB 6.8