-/* ARC target-dependent stuff.
- Copyright (C) 1995, 1997 Free Software Foundation, Inc.
+/* Target dependent code for ARC architecture, for GDB.
+
+ Copyright 2005-2022 Free Software Foundation, Inc.
+ Contributed by Synopsys Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+/* GDB header files. */
#include "defs.h"
-#include "frame.h"
-#include "inferior.h"
+#include "arch-utils.h"
+#include "elf-bfd.h"
+#include "disasm.h"
+#include "dwarf2/frame.h"
+#include "frame-base.h"
+#include "frame-unwind.h"
#include "gdbcore.h"
-#include "target.h"
-#include "floatformat.h"
-#include "symtab.h"
+#include "reggroups.h"
#include "gdbcmd.h"
+#include "objfiles.h"
+#include "osabi.h"
+#include "prologue-value.h"
+#include "target-descriptions.h"
+#include "trad-frame.h"
+
+/* ARC header files. */
+#include "opcode/arc.h"
+#include "opcodes/arc-dis.h"
+#include "arc-tdep.h"
+#include "arch/arc.h"
+
+/* Standard headers. */
+#include <algorithm>
+#include <sstream>
+
+/* The frame unwind cache for ARC. */
+
+struct arc_frame_cache
+{
+ /* The stack pointer at the time this frame was created; i.e. the caller's
+ stack pointer when this function was called. It is used to identify this
+ frame. */
+ CORE_ADDR prev_sp;
+
+ /* Register that is a base for this frame - FP for normal frame, SP for
+ non-FP frames. */
+ int frame_base_reg;
+
+ /* Offset from the previous SP to the current frame base. If GCC uses
+ `SUB SP,SP,offset` to allocate space for local variables, then it will be
+ done after setting up a frame pointer, but it still will be considered
+ part of prologue, therefore SP will be lesser than FP at the end of the
+ prologue analysis. In this case that would be an offset from old SP to a
+ new FP. But in case of non-FP frames, frame base is an SP and thus that
+ would be an offset from old SP to new SP. What is important is that this
+ is an offset from old SP to a known register, so it can be used to find
+ old SP.
+
+ Using FP is preferable, when possible, because SP can change in function
+ body after prologue due to alloca, variadic arguments or other shenanigans.
+ If that is the case in the caller frame, then PREV_SP will point to SP at
+ the moment of function call, but it will be different from SP value at the
+ end of the caller prologue. As a result it will not be possible to
+ reconstruct caller's frame and go past it in the backtrace. Those things
+ are unlikely to happen to FP - FP value at the moment of function call (as
+ stored on stack in callee prologue) is also an FP value at the end of the
+ caller's prologue. */
+
+ LONGEST frame_base_offset;
+
+ /* Store addresses for registers saved in prologue. During prologue analysis
+ GDB stores offsets relatively to "old SP", then after old SP is evaluated,
+ offsets are replaced with absolute addresses. */
+ trad_frame_saved_reg *saved_regs;
+};
+
+/* Global debug flag. */
+
+bool arc_debug;
+
+/* List of "maintenance print arc" commands. */
+
+static struct cmd_list_element *maintenance_print_arc_list = NULL;
+
+/* A set of registers that we expect to find in a tdesc_feature. These
+ are used in ARC_TDESC_INIT when processing the target description. */
+
+struct arc_register_feature
+{
+ /* Information for a single register. */
+ struct register_info
+ {
+ /* The GDB register number for this register. */
+ int regnum;
+
+ /* List of names for this register. The first name in this list is the
+ preferred name, the name GDB will use when describing this register. */
+ std::vector<const char *> names;
-/* Current CPU, set with the "set cpu" command. */
-static int arc_bfd_mach_type;
-char *arc_cpu_type;
-char *tmp_arc_cpu_type;
+ /* When true, this register must be present in this feature set. */
+ bool required_p;
+ };
-/* Table of cpu names. */
-struct
+ /* The name for this feature. This is the name used to find this feature
+ within the target description. */
+ const char *name;
+
+ /* List of all the registers that we expect to encounter in this register
+ set. */
+ std::vector<struct register_info> registers;
+};
+
+/* Obsolete feature names for backward compatibility. */
+static const char *ARC_CORE_V1_OBSOLETE_FEATURE_NAME
+ = "org.gnu.gdb.arc.core.arcompact";
+static const char *ARC_CORE_V2_OBSOLETE_FEATURE_NAME
+ = "org.gnu.gdb.arc.core.v2";
+static const char *ARC_CORE_V2_REDUCED_OBSOLETE_FEATURE_NAME
+ = "org.gnu.gdb.arc.core-reduced.v2";
+static const char *ARC_AUX_OBSOLETE_FEATURE_NAME
+ = "org.gnu.gdb.arc.aux-minimal";
+/* Modern feature names. */
+static const char *ARC_CORE_FEATURE_NAME = "org.gnu.gdb.arc.core";
+static const char *ARC_AUX_FEATURE_NAME = "org.gnu.gdb.arc.aux";
+
+/* ARCv1 (ARC600, ARC601, ARC700) general core registers feature set.
+ See also arc_update_acc_reg_names() for "accl/acch" names. */
+
+static struct arc_register_feature arc_v1_core_reg_feature =
+{
+ ARC_CORE_FEATURE_NAME,
{
- char *name;
- int value;
+ { ARC_R0_REGNUM + 0, { "r0" }, true },
+ { ARC_R0_REGNUM + 1, { "r1" }, true },
+ { ARC_R0_REGNUM + 2, { "r2" }, true },
+ { ARC_R0_REGNUM + 3, { "r3" }, true },
+ { ARC_R0_REGNUM + 4, { "r4" }, false },
+ { ARC_R0_REGNUM + 5, { "r5" }, false },
+ { ARC_R0_REGNUM + 6, { "r6" }, false },
+ { ARC_R0_REGNUM + 7, { "r7" }, false },
+ { ARC_R0_REGNUM + 8, { "r8" }, false },
+ { ARC_R0_REGNUM + 9, { "r9" }, false },
+ { ARC_R0_REGNUM + 10, { "r10" }, true },
+ { ARC_R0_REGNUM + 11, { "r11" }, true },
+ { ARC_R0_REGNUM + 12, { "r12" }, true },
+ { ARC_R0_REGNUM + 13, { "r13" }, true },
+ { ARC_R0_REGNUM + 14, { "r14" }, true },
+ { ARC_R0_REGNUM + 15, { "r15" }, true },
+ { ARC_R0_REGNUM + 16, { "r16" }, false },
+ { ARC_R0_REGNUM + 17, { "r17" }, false },
+ { ARC_R0_REGNUM + 18, { "r18" }, false },
+ { ARC_R0_REGNUM + 19, { "r19" }, false },
+ { ARC_R0_REGNUM + 20, { "r20" }, false },
+ { ARC_R0_REGNUM + 21, { "r21" }, false },
+ { ARC_R0_REGNUM + 22, { "r22" }, false },
+ { ARC_R0_REGNUM + 23, { "r23" }, false },
+ { ARC_R0_REGNUM + 24, { "r24" }, false },
+ { ARC_R0_REGNUM + 25, { "r25" }, false },
+ { ARC_R0_REGNUM + 26, { "gp" }, true },
+ { ARC_R0_REGNUM + 27, { "fp" }, true },
+ { ARC_R0_REGNUM + 28, { "sp" }, true },
+ { ARC_R0_REGNUM + 29, { "ilink1" }, false },
+ { ARC_R0_REGNUM + 30, { "ilink2" }, false },
+ { ARC_R0_REGNUM + 31, { "blink" }, true },
+ { ARC_R0_REGNUM + 32, { "r32" }, false },
+ { ARC_R0_REGNUM + 33, { "r33" }, false },
+ { ARC_R0_REGNUM + 34, { "r34" }, false },
+ { ARC_R0_REGNUM + 35, { "r35" }, false },
+ { ARC_R0_REGNUM + 36, { "r36" }, false },
+ { ARC_R0_REGNUM + 37, { "r37" }, false },
+ { ARC_R0_REGNUM + 38, { "r38" }, false },
+ { ARC_R0_REGNUM + 39, { "r39" }, false },
+ { ARC_R0_REGNUM + 40, { "r40" }, false },
+ { ARC_R0_REGNUM + 41, { "r41" }, false },
+ { ARC_R0_REGNUM + 42, { "r42" }, false },
+ { ARC_R0_REGNUM + 43, { "r43" }, false },
+ { ARC_R0_REGNUM + 44, { "r44" }, false },
+ { ARC_R0_REGNUM + 45, { "r45" }, false },
+ { ARC_R0_REGNUM + 46, { "r46" }, false },
+ { ARC_R0_REGNUM + 47, { "r47" }, false },
+ { ARC_R0_REGNUM + 48, { "r48" }, false },
+ { ARC_R0_REGNUM + 49, { "r49" }, false },
+ { ARC_R0_REGNUM + 50, { "r50" }, false },
+ { ARC_R0_REGNUM + 51, { "r51" }, false },
+ { ARC_R0_REGNUM + 52, { "r52" }, false },
+ { ARC_R0_REGNUM + 53, { "r53" }, false },
+ { ARC_R0_REGNUM + 54, { "r54" }, false },
+ { ARC_R0_REGNUM + 55, { "r55" }, false },
+ { ARC_R0_REGNUM + 56, { "r56" }, false },
+ { ARC_R0_REGNUM + 57, { "r57" }, false },
+ { ARC_R0_REGNUM + 58, { "r58", "accl" }, false },
+ { ARC_R0_REGNUM + 59, { "r59", "acch" }, false },
+ { ARC_R0_REGNUM + 60, { "lp_count" }, false },
+ { ARC_R0_REGNUM + 61, { "reserved" }, false },
+ { ARC_R0_REGNUM + 62, { "limm" }, false },
+ { ARC_R0_REGNUM + 63, { "pcl" }, true }
}
-arc_cpu_type_table[] =
+};
+
+/* ARCv2 (ARCHS) general core registers feature set. See also
+ arc_update_acc_reg_names() for "accl/acch" names. */
+
+static struct arc_register_feature arc_v2_core_reg_feature =
{
+ ARC_CORE_FEATURE_NAME,
{
- "base", bfd_mach_arc_base
+ { ARC_R0_REGNUM + 0, { "r0" }, true },
+ { ARC_R0_REGNUM + 1, { "r1" }, true },
+ { ARC_R0_REGNUM + 2, { "r2" }, true },
+ { ARC_R0_REGNUM + 3, { "r3" }, true },
+ { ARC_R0_REGNUM + 4, { "r4" }, false },
+ { ARC_R0_REGNUM + 5, { "r5" }, false },
+ { ARC_R0_REGNUM + 6, { "r6" }, false },
+ { ARC_R0_REGNUM + 7, { "r7" }, false },
+ { ARC_R0_REGNUM + 8, { "r8" }, false },
+ { ARC_R0_REGNUM + 9, { "r9" }, false },
+ { ARC_R0_REGNUM + 10, { "r10" }, true },
+ { ARC_R0_REGNUM + 11, { "r11" }, true },
+ { ARC_R0_REGNUM + 12, { "r12" }, true },
+ { ARC_R0_REGNUM + 13, { "r13" }, true },
+ { ARC_R0_REGNUM + 14, { "r14" }, true },
+ { ARC_R0_REGNUM + 15, { "r15" }, true },
+ { ARC_R0_REGNUM + 16, { "r16" }, false },
+ { ARC_R0_REGNUM + 17, { "r17" }, false },
+ { ARC_R0_REGNUM + 18, { "r18" }, false },
+ { ARC_R0_REGNUM + 19, { "r19" }, false },
+ { ARC_R0_REGNUM + 20, { "r20" }, false },
+ { ARC_R0_REGNUM + 21, { "r21" }, false },
+ { ARC_R0_REGNUM + 22, { "r22" }, false },
+ { ARC_R0_REGNUM + 23, { "r23" }, false },
+ { ARC_R0_REGNUM + 24, { "r24" }, false },
+ { ARC_R0_REGNUM + 25, { "r25" }, false },
+ { ARC_R0_REGNUM + 26, { "gp" }, true },
+ { ARC_R0_REGNUM + 27, { "fp" }, true },
+ { ARC_R0_REGNUM + 28, { "sp" }, true },
+ { ARC_R0_REGNUM + 29, { "ilink" }, false },
+ { ARC_R0_REGNUM + 30, { "r30" }, true },
+ { ARC_R0_REGNUM + 31, { "blink" }, true },
+ { ARC_R0_REGNUM + 32, { "r32" }, false },
+ { ARC_R0_REGNUM + 33, { "r33" }, false },
+ { ARC_R0_REGNUM + 34, { "r34" }, false },
+ { ARC_R0_REGNUM + 35, { "r35" }, false },
+ { ARC_R0_REGNUM + 36, { "r36" }, false },
+ { ARC_R0_REGNUM + 37, { "r37" }, false },
+ { ARC_R0_REGNUM + 38, { "r38" }, false },
+ { ARC_R0_REGNUM + 39, { "r39" }, false },
+ { ARC_R0_REGNUM + 40, { "r40" }, false },
+ { ARC_R0_REGNUM + 41, { "r41" }, false },
+ { ARC_R0_REGNUM + 42, { "r42" }, false },
+ { ARC_R0_REGNUM + 43, { "r43" }, false },
+ { ARC_R0_REGNUM + 44, { "r44" }, false },
+ { ARC_R0_REGNUM + 45, { "r45" }, false },
+ { ARC_R0_REGNUM + 46, { "r46" }, false },
+ { ARC_R0_REGNUM + 47, { "r47" }, false },
+ { ARC_R0_REGNUM + 48, { "r48" }, false },
+ { ARC_R0_REGNUM + 49, { "r49" }, false },
+ { ARC_R0_REGNUM + 50, { "r50" }, false },
+ { ARC_R0_REGNUM + 51, { "r51" }, false },
+ { ARC_R0_REGNUM + 52, { "r52" }, false },
+ { ARC_R0_REGNUM + 53, { "r53" }, false },
+ { ARC_R0_REGNUM + 54, { "r54" }, false },
+ { ARC_R0_REGNUM + 55, { "r55" }, false },
+ { ARC_R0_REGNUM + 56, { "r56" }, false },
+ { ARC_R0_REGNUM + 57, { "r57" }, false },
+ { ARC_R0_REGNUM + 58, { "r58", "accl" }, false },
+ { ARC_R0_REGNUM + 59, { "r59", "acch" }, false },
+ { ARC_R0_REGNUM + 60, { "lp_count" }, false },
+ { ARC_R0_REGNUM + 61, { "reserved" }, false },
+ { ARC_R0_REGNUM + 62, { "limm" }, false },
+ { ARC_R0_REGNUM + 63, { "pcl" }, true }
}
- ,
+};
+
+/* The common auxiliary registers feature set. The REGNUM field
+ must match the ARC_REGNUM enum in arc-tdep.h. */
+
+static const struct arc_register_feature arc_common_aux_reg_feature =
+{
+ ARC_AUX_FEATURE_NAME,
{
- NULL, 0
+ { ARC_FIRST_AUX_REGNUM + 0, { "pc" }, true },
+ { ARC_FIRST_AUX_REGNUM + 1, { "status32" }, true },
+ { ARC_FIRST_AUX_REGNUM + 2, { "lp_start" }, false },
+ { ARC_FIRST_AUX_REGNUM + 3, { "lp_end" }, false },
+ { ARC_FIRST_AUX_REGNUM + 4, { "bta" }, false }
}
};
-/* Used by simulator. */
-int display_pipeline_p;
-int cpu_timer;
-/* This one must have the same type as used in the emulator.
- It's currently an enum so this should be ok for now. */
-int debug_pipeline_p;
-
-#define ARC_CALL_SAVED_REG(r) ((r) >= 16 && (r) < 24)
-
-#define OPMASK 0xf8000000
-
-/* Instruction field accessor macros.
- See the Programmer's Reference Manual. */
-#define X_OP(i) (((i) >> 27) & 0x1f)
-#define X_A(i) (((i) >> 21) & 0x3f)
-#define X_B(i) (((i) >> 15) & 0x3f)
-#define X_C(i) (((i) >> 9) & 0x3f)
-#define X_D(i) ((((i) & 0x1ff) ^ 0x100) - 0x100)
-#define X_L(i) (((((i) >> 5) & 0x3ffffc) ^ 0x200000) - 0x200000)
-#define X_N(i) (((i) >> 5) & 3)
-#define X_Q(i) ((i) & 0x1f)
-
-/* Return non-zero if X is a short immediate data indicator. */
-#define SHIMM_P(x) ((x) == 61 || (x) == 63)
-
-/* Return non-zero if X is a "long" (32 bit) immediate data indicator. */
-#define LIMM_P(x) ((x) == 62)
-
-/* Build a simple instruction. */
-#define BUILD_INSN(op, a, b, c, d) \
- ((((op) & 31) << 27) \
- | (((a) & 63) << 21) \
- | (((b) & 63) << 15) \
- | (((c) & 63) << 9) \
- | ((d) & 511))
-\f
-/* Codestream stuff. */
-static void codestream_read PARAMS ((unsigned int *, int));
-static void codestream_seek PARAMS ((CORE_ADDR));
-static unsigned int codestream_fill PARAMS ((int));
-
-#define CODESTREAM_BUFSIZ 16
-static CORE_ADDR codestream_next_addr;
-static CORE_ADDR codestream_addr;
-static unsigned int codestream_buf[CODESTREAM_BUFSIZ];
-static int codestream_off;
-static int codestream_cnt;
-
-#define codestream_tell() \
- (codestream_addr + codestream_off * sizeof (codestream_buf[0]))
-#define codestream_peek() \
- (codestream_cnt == 0 \
- ? codestream_fill (1) \
- : codestream_buf[codestream_off])
-#define codestream_get() \
- (codestream_cnt-- == 0 \
- ? codestream_fill (0) \
- : codestream_buf[codestream_off++])
-
-static unsigned int
-codestream_fill (peek_flag)
- int peek_flag;
-{
- codestream_addr = codestream_next_addr;
- codestream_next_addr += CODESTREAM_BUFSIZ * sizeof (codestream_buf[0]);
- codestream_off = 0;
- codestream_cnt = CODESTREAM_BUFSIZ;
- read_memory (codestream_addr, (char *) codestream_buf,
- CODESTREAM_BUFSIZ * sizeof (codestream_buf[0]));
- /* FIXME: check return code? */
-
- /* Handle byte order differences. */
- if (HOST_BYTE_ORDER != TARGET_BYTE_ORDER)
- {
- register unsigned int i, j, n = sizeof (codestream_buf[0]);
- register char tmp, *p;
- for (i = 0, p = (char *) codestream_buf; i < CODESTREAM_BUFSIZ;
- ++i, p += n)
- for (j = 0; j < n / 2; ++j)
- tmp = p[j], p[j] = p[n - 1 - j], p[n - 1 - j] = tmp;
- }
-
- if (peek_flag)
- return codestream_peek ();
- else
- return codestream_get ();
+static char *arc_disassembler_options = NULL;
+
+/* Functions are sorted in the order as they are used in the
+ _initialize_arc_tdep (), which uses the same order as gdbarch.h. Static
+ functions are defined before the first invocation. */
+
+/* Returns an unsigned value of OPERAND_NUM in instruction INSN.
+ For relative branch instructions returned value is an offset, not an actual
+ branch target. */
+
+static ULONGEST
+arc_insn_get_operand_value (const struct arc_instruction &insn,
+ unsigned int operand_num)
+{
+ switch (insn.operands[operand_num].kind)
+ {
+ case ARC_OPERAND_KIND_LIMM:
+ gdb_assert (insn.limm_p);
+ return insn.limm_value;
+ case ARC_OPERAND_KIND_SHIMM:
+ return insn.operands[operand_num].value;
+ default:
+ /* Value in instruction is a register number. */
+ struct regcache *regcache = get_current_regcache ();
+ ULONGEST value;
+ regcache_cooked_read_unsigned (regcache,
+ insn.operands[operand_num].value,
+ &value);
+ return value;
+ }
}
-static void
-codestream_seek (place)
- CORE_ADDR place;
+/* Like arc_insn_get_operand_value, but returns a signed value. */
+
+static LONGEST
+arc_insn_get_operand_value_signed (const struct arc_instruction &insn,
+ unsigned int operand_num)
{
- codestream_next_addr = place / CODESTREAM_BUFSIZ;
- codestream_next_addr *= CODESTREAM_BUFSIZ;
- codestream_cnt = 0;
- codestream_fill (1);
- while (codestream_tell () != place)
- codestream_get ();
+ switch (insn.operands[operand_num].kind)
+ {
+ case ARC_OPERAND_KIND_LIMM:
+ gdb_assert (insn.limm_p);
+ /* Convert unsigned raw value to signed one. This assumes 2's
+ complement arithmetic, but so is the LONG_MIN value from generic
+ defs.h and that assumption is true for ARC. */
+ gdb_static_assert (sizeof (insn.limm_value) == sizeof (int));
+ return (((LONGEST) insn.limm_value) ^ INT_MIN) - INT_MIN;
+ case ARC_OPERAND_KIND_SHIMM:
+ /* Sign conversion has been done by binutils. */
+ return insn.operands[operand_num].value;
+ default:
+ /* Value in instruction is a register number. */
+ struct regcache *regcache = get_current_regcache ();
+ LONGEST value;
+ regcache_cooked_read_signed (regcache,
+ insn.operands[operand_num].value,
+ &value);
+ return value;
+ }
}
-/* This function is currently unused but leave in for now. */
+/* Get register with base address of memory operation. */
-static void
-codestream_read (buf, count)
- unsigned int *buf;
- int count;
+static int
+arc_insn_get_memory_base_reg (const struct arc_instruction &insn)
{
- unsigned int *p;
- int i;
- p = buf;
- for (i = 0; i < count; i++)
- *p++ = codestream_get ();
+ /* POP_S and PUSH_S have SP as an implicit argument in a disassembler. */
+ if (insn.insn_class == PUSH || insn.insn_class == POP)
+ return ARC_SP_REGNUM;
+
+ gdb_assert (insn.insn_class == LOAD || insn.insn_class == STORE);
+
+ /* Other instructions all have at least two operands: operand 0 is data,
+ operand 1 is address. Operand 2 is offset from address. However, see
+ comment to arc_instruction.operands - in some cases, third operand may be
+ missing, namely if it is 0. */
+ gdb_assert (insn.operands_count >= 2);
+ return insn.operands[1].value;
+}
+
+/* Get offset of a memory operation INSN. */
+
+static CORE_ADDR
+arc_insn_get_memory_offset (const struct arc_instruction &insn)
+{
+ /* POP_S and PUSH_S have offset as an implicit argument in a
+ disassembler. */
+ if (insn.insn_class == POP)
+ return 4;
+ else if (insn.insn_class == PUSH)
+ return -4;
+
+ gdb_assert (insn.insn_class == LOAD || insn.insn_class == STORE);
+
+ /* Other instructions all have at least two operands: operand 0 is data,
+ operand 1 is address. Operand 2 is offset from address. However, see
+ comment to arc_instruction.operands - in some cases, third operand may be
+ missing, namely if it is 0. */
+ if (insn.operands_count < 3)
+ return 0;
+
+ CORE_ADDR value = arc_insn_get_operand_value (insn, 2);
+ /* Handle scaling. */
+ if (insn.writeback_mode == ARC_WRITEBACK_AS)
+ {
+ /* Byte data size is not valid for AS. Halfword means shift by 1 bit.
+ Word and double word means shift by 2 bits. */
+ gdb_assert (insn.data_size_mode != ARC_SCALING_B);
+ if (insn.data_size_mode == ARC_SCALING_H)
+ value <<= 1;
+ else
+ value <<= 2;
+ }
+ return value;
+}
+
+CORE_ADDR
+arc_insn_get_branch_target (const struct arc_instruction &insn)
+{
+ gdb_assert (insn.is_control_flow);
+
+ /* BI [c]: PC = nextPC + (c << 2). */
+ if (insn.insn_class == BI)
+ {
+ ULONGEST reg_value = arc_insn_get_operand_value (insn, 0);
+ return arc_insn_get_linear_next_pc (insn) + (reg_value << 2);
+ }
+ /* BIH [c]: PC = nextPC + (c << 1). */
+ else if (insn.insn_class == BIH)
+ {
+ ULONGEST reg_value = arc_insn_get_operand_value (insn, 0);
+ return arc_insn_get_linear_next_pc (insn) + (reg_value << 1);
+ }
+ /* JLI and EI. */
+ /* JLI and EI depend on optional AUX registers. Not supported right now. */
+ else if (insn.insn_class == JLI)
+ {
+ fprintf_unfiltered (gdb_stderr,
+ "JLI_S instruction is not supported by the GDB.");
+ return 0;
+ }
+ else if (insn.insn_class == EI)
+ {
+ fprintf_unfiltered (gdb_stderr,
+ "EI_S instruction is not supported by the GDB.");
+ return 0;
+ }
+ /* LEAVE_S: PC = BLINK. */
+ else if (insn.insn_class == LEAVE)
+ {
+ struct regcache *regcache = get_current_regcache ();
+ ULONGEST value;
+ regcache_cooked_read_unsigned (regcache, ARC_BLINK_REGNUM, &value);
+ return value;
+ }
+ /* BBIT0/1, BRcc: PC = currentPC + operand. */
+ else if (insn.insn_class == BBIT0 || insn.insn_class == BBIT1
+ || insn.insn_class == BRCC)
+ {
+ /* Most instructions has branch target as their sole argument. However
+ conditional brcc/bbit has it as a third operand. */
+ CORE_ADDR pcrel_addr = arc_insn_get_operand_value (insn, 2);
+
+ /* Offset is relative to the 4-byte aligned address of the current
+ instruction, hence last two bits should be truncated. */
+ return pcrel_addr + align_down (insn.address, 4);
+ }
+ /* B, Bcc, BL, BLcc, LP, LPcc: PC = currentPC + operand. */
+ else if (insn.insn_class == BRANCH || insn.insn_class == LOOP)
+ {
+ CORE_ADDR pcrel_addr = arc_insn_get_operand_value (insn, 0);
+
+ /* Offset is relative to the 4-byte aligned address of the current
+ instruction, hence last two bits should be truncated. */
+ return pcrel_addr + align_down (insn.address, 4);
+ }
+ /* J, Jcc, JL, JLcc: PC = operand. */
+ else if (insn.insn_class == JUMP)
+ {
+ /* All jumps are single-operand. */
+ return arc_insn_get_operand_value (insn, 0);
+ }
+
+ /* This is some new and unknown instruction. */
+ gdb_assert_not_reached ("Unknown branch instruction.");
}
-\f
-/* Set up prologue scanning and return the first insn. */
-static unsigned int
-setup_prologue_scan (pc)
- CORE_ADDR pc;
+/* Dump INSN into gdb_stdlog. */
+
+static void
+arc_insn_dump (const struct arc_instruction &insn)
{
- unsigned int insn;
+ struct gdbarch *gdbarch = target_gdbarch ();
+
+ arc_print ("Dumping arc_instruction at %s\n",
+ paddress (gdbarch, insn.address));
+ arc_print ("\tlength = %u\n", insn.length);
+
+ if (!insn.valid)
+ {
+ arc_print ("\tThis is not a valid ARC instruction.\n");
+ return;
+ }
+
+ arc_print ("\tlength_with_limm = %u\n", insn.length + (insn.limm_p ? 4 : 0));
+ arc_print ("\tcc = 0x%x\n", insn.condition_code);
+ arc_print ("\tinsn_class = %u\n", insn.insn_class);
+ arc_print ("\tis_control_flow = %i\n", insn.is_control_flow);
+ arc_print ("\thas_delay_slot = %i\n", insn.has_delay_slot);
+
+ CORE_ADDR next_pc = arc_insn_get_linear_next_pc (insn);
+ arc_print ("\tlinear_next_pc = %s\n", paddress (gdbarch, next_pc));
+
+ if (insn.is_control_flow)
+ {
+ CORE_ADDR t = arc_insn_get_branch_target (insn);
+ arc_print ("\tbranch_target = %s\n", paddress (gdbarch, t));
+ }
+
+ arc_print ("\tlimm_p = %i\n", insn.limm_p);
+ if (insn.limm_p)
+ arc_print ("\tlimm_value = 0x%08x\n", insn.limm_value);
+
+ if (insn.insn_class == STORE || insn.insn_class == LOAD
+ || insn.insn_class == PUSH || insn.insn_class == POP)
+ {
+ arc_print ("\twriteback_mode = %u\n", insn.writeback_mode);
+ arc_print ("\tdata_size_mode = %u\n", insn.data_size_mode);
+ arc_print ("\tmemory_base_register = %s\n",
+ gdbarch_register_name (gdbarch,
+ arc_insn_get_memory_base_reg (insn)));
+ /* get_memory_offset returns an unsigned CORE_ADDR, but treat it as a
+ LONGEST for a nicer representation. */
+ arc_print ("\taddr_offset = %s\n",
+ plongest (arc_insn_get_memory_offset (insn)));
+ }
- codestream_seek (pc);
- insn = codestream_get ();
+ arc_print ("\toperands_count = %u\n", insn.operands_count);
+ for (unsigned int i = 0; i < insn.operands_count; ++i)
+ {
+ int is_reg = (insn.operands[i].kind == ARC_OPERAND_KIND_REG);
+
+ arc_print ("\toperand[%u] = {\n", i);
+ arc_print ("\t\tis_reg = %i\n", is_reg);
+ if (is_reg)
+ arc_print ("\t\tregister = %s\n",
+ gdbarch_register_name (gdbarch, insn.operands[i].value));
+ /* Don't know if this value is signed or not, so print both
+ representations. This tends to look quite ugly, especially for big
+ numbers. */
+ arc_print ("\t\tunsigned value = %s\n",
+ pulongest (arc_insn_get_operand_value (insn, i)));
+ arc_print ("\t\tsigned value = %s\n",
+ plongest (arc_insn_get_operand_value_signed (insn, i)));
+ arc_print ("\t}\n");
+ }
+}
- return insn;
+CORE_ADDR
+arc_insn_get_linear_next_pc (const struct arc_instruction &insn)
+{
+ /* In ARC long immediate is always 4 bytes. */
+ return (insn.address + insn.length + (insn.limm_p ? 4 : 0));
}
-/*
- * Find & return amount a local space allocated, and advance codestream to
- * first register push (if any).
- * If entry sequence doesn't make sense, return -1, and leave
- * codestream pointer random.
- */
+/* Implement the "write_pc" gdbarch method.
+
+ In ARC PC register is a normal register so in most cases setting PC value
+ is a straightforward process: debugger just writes PC value. However it
+ gets trickier in case when current instruction is an instruction in delay
+ slot. In this case CPU will execute instruction at current PC value, then
+ will set PC to the current value of BTA register; also current instruction
+ cannot be branch/jump and some of the other instruction types. Thus if
+ debugger would try to just change PC value in this case, this instruction
+ will get executed, but then core will "jump" to the original branch target.
+
+ Whether current instruction is a delay-slot instruction or not is indicated
+ by DE bit in STATUS32 register indicates if current instruction is a delay
+ slot instruction. This bit is writable by debug host, which allows debug
+ host to prevent core from jumping after the delay slot instruction. It
+ also works in another direction: setting this bit will make core to treat
+ any current instructions as a delay slot instruction and to set PC to the
+ current value of BTA register.
+
+ To workaround issues with changing PC register while in delay slot
+ instruction, debugger should check for the STATUS32.DE bit and reset it if
+ it is set. No other change is required in this function. Most common
+ case, where this function might be required is calling inferior functions
+ from debugger. Generic GDB logic handles this pretty well: current values
+ of registers are stored, value of PC is changed (that is the job of this
+ function), and after inferior function is executed, GDB restores all
+ registers, include BTA and STATUS32, which also means that core is returned
+ to its original state of being halted on delay slot instructions.
+
+ This method is useless for ARC 600, because it doesn't have externally
+ exposed BTA register. In the case of ARC 600 it is impossible to restore
+ core to its state in all occasions thus core should never be halted (from
+ the perspective of debugger host) in the delay slot. */
-static long
-arc_get_frame_setup (pc)
- CORE_ADDR pc;
+static void
+arc_write_pc (struct regcache *regcache, CORE_ADDR new_pc)
{
- unsigned int insn;
- /* Size of frame or -1 if unrecognizable prologue. */
- int frame_size = -1;
- /* An initial "sub sp,sp,N" may or may not be for a stdarg fn. */
- int maybe_stdarg_decr = -1;
+ struct gdbarch *gdbarch = regcache->arch ();
- insn = setup_prologue_scan (pc);
+ arc_debug_printf ("Writing PC, new value=%s",
+ paddress (gdbarch, new_pc));
- /* The authority for what appears here is the home-grown ABI.
- The most recent version is 1.2. */
+ regcache_cooked_write_unsigned (regcache, gdbarch_pc_regnum (gdbarch),
+ new_pc);
- /* First insn may be "sub sp,sp,N" if stdarg fn. */
- if ((insn & BUILD_INSN (-1, -1, -1, -1, 0))
- == BUILD_INSN (10, SP_REGNUM, SP_REGNUM, SHIMM_REGNUM, 0))
+ ULONGEST status32;
+ regcache_cooked_read_unsigned (regcache, gdbarch_ps_regnum (gdbarch),
+ &status32);
+
+ if ((status32 & ARC_STATUS32_DE_MASK) != 0)
{
- maybe_stdarg_decr = X_D (insn);
- insn = codestream_get ();
+ arc_debug_printf ("Changing PC while in delay slot. Will "
+ "reset STATUS32.DE bit to zero. Value of STATUS32 "
+ "register is 0x%s",
+ phex (status32, ARC_REGISTER_SIZE));
+
+ /* Reset bit and write to the cache. */
+ status32 &= ~0x40;
+ regcache_cooked_write_unsigned (regcache, gdbarch_ps_regnum (gdbarch),
+ status32);
}
+}
+
+/* Implement the "virtual_frame_pointer" gdbarch method.
+
+ According to ABI the FP (r27) is used to point to the middle of the current
+ stack frame, just below the saved FP and before local variables, register
+ spill area and outgoing args. However for optimization levels above O2 and
+ in any case in leaf functions, the frame pointer is usually not set at all.
+ The exception being when handling nested functions.
+
+ We use this function to return a "virtual" frame pointer, marking the start
+ of the current stack frame as a register-offset pair. If the FP is not
+ being used, then it should return SP, with an offset of the frame size.
+
+ The current implementation doesn't actually know the frame size, nor
+ whether the FP is actually being used, so for now we just return SP and an
+ offset of zero. This is no worse than other architectures, but is needed
+ to avoid assertion failures.
+
+ TODO: Can we determine the frame size to get a correct offset?
+
+ PC is a program counter where we need the virtual FP. REG_PTR is the base
+ register used for the virtual FP. OFFSET_PTR is the offset used for the
+ virtual FP. */
+
+static void
+arc_virtual_frame_pointer (struct gdbarch *gdbarch, CORE_ADDR pc,
+ int *reg_ptr, LONGEST *offset_ptr)
+{
+ *reg_ptr = gdbarch_sp_regnum (gdbarch);
+ *offset_ptr = 0;
+}
+
+/* Implement the "push_dummy_call" gdbarch method.
+
+ Stack Frame Layout
+
+ This shows the layout of the stack frame for the general case of a
+ function call; a given function might not have a variable number of
+ arguments or local variables, or might not save any registers, so it would
+ not have the corresponding frame areas. Additionally, a leaf function
+ (i.e. one which calls no other functions) does not need to save the
+ contents of the BLINK register (which holds its return address), and a
+ function might not have a frame pointer.
+
+ The stack grows downward, so SP points below FP in memory; SP always
+ points to the last used word on the stack, not the first one.
+
+ | | |
+ | arg word N | | caller's
+ | : | | frame
+ | arg word 10 | |
+ | arg word 9 | |
+ old SP ---> +-----------------------+ --+
+ | | |
+ | callee-saved | |
+ | registers | |
+ | including fp, blink | |
+ | | | callee's
+ new FP ---> +-----------------------+ | frame
+ | | |
+ | local | |
+ | variables | |
+ | | |
+ | register | |
+ | spill area | |
+ | | |
+ | outgoing args | |
+ | | |
+ new SP ---> +-----------------------+ --+
+ | |
+ | unused |
+ | |
+ |
+ |
+ V
+ downwards
+
+ The list of arguments to be passed to a function is considered to be a
+ sequence of _N_ words (as though all the parameters were stored in order in
+ memory with each parameter occupying an integral number of words). Words
+ 1..8 are passed in registers 0..7; if the function has more than 8 words of
+ arguments then words 9..@em N are passed on the stack in the caller's frame.
+
+ If the function has a variable number of arguments, e.g. it has a form such
+ as `function (p1, p2, ...);' and _P_ words are required to hold the values
+ of the named parameters (which are passed in registers 0..@em P -1), then
+ the remaining 8 - _P_ words passed in registers _P_..7 are spilled into the
+ top of the frame so that the anonymous parameter words occupy a continuous
+ region.
+
+ Any arguments are already in target byte order. We just need to store
+ them!
+
+ BP_ADDR is the return address where breakpoint must be placed. NARGS is
+ the number of arguments to the function. ARGS is the arguments values (in
+ target byte order). SP is the Current value of SP register. STRUCT_RETURN
+ is TRUE if structures are returned by the function. STRUCT_ADDR is the
+ hidden address for returning a struct. Returns SP of a new frame. */
+
+static CORE_ADDR
+arc_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
+ struct regcache *regcache, CORE_ADDR bp_addr, int nargs,
+ struct value **args, CORE_ADDR sp,
+ function_call_return_method return_method,
+ CORE_ADDR struct_addr)
+{
+ arc_debug_printf ("nargs = %d", nargs);
+
+ int arg_reg = ARC_FIRST_ARG_REGNUM;
+
+ /* Push the return address. */
+ regcache_cooked_write_unsigned (regcache, ARC_BLINK_REGNUM, bp_addr);
- if ((insn & BUILD_INSN (-1, 0, -1, -1, -1)) /* st blink,[sp,4] */
- == BUILD_INSN (2, 0, SP_REGNUM, BLINK_REGNUM, 4))
+ /* Are we returning a value using a structure return instead of a normal
+ value return? If so, struct_addr is the address of the reserved space for
+ the return structure to be written on the stack, and that address is
+ passed to that function as a hidden first argument. */
+ if (return_method == return_method_struct)
{
- insn = codestream_get ();
- /* Frame may not be necessary, even though blink is saved.
- At least this is something we recognize. */
- frame_size = 0;
+ /* Pass the return address in the first argument register. */
+ regcache_cooked_write_unsigned (regcache, arg_reg, struct_addr);
+
+ arc_debug_printf ("struct return address %s passed in R%d",
+ print_core_address (gdbarch, struct_addr), arg_reg);
+
+ arg_reg++;
}
- if ((insn & BUILD_INSN (-1, 0, -1, -1, -1)) /* st fp,[sp] */
- == BUILD_INSN (2, 0, SP_REGNUM, FP_REGNUM, 0))
+ if (nargs > 0)
{
- insn = codestream_get ();
- if ((insn & BUILD_INSN (-1, -1, -1, -1, 0))
- != BUILD_INSN (12, FP_REGNUM, SP_REGNUM, SP_REGNUM, 0))
- return -1;
+ unsigned int total_space = 0;
- /* Check for stack adjustment sub sp,sp,N. */
- insn = codestream_peek ();
- if ((insn & BUILD_INSN (-1, -1, -1, 0, 0))
- == BUILD_INSN (10, SP_REGNUM, SP_REGNUM, 0, 0))
+ /* How much space do the arguments occupy in total? Must round each
+ argument's size up to an integral number of words. */
+ for (int i = 0; i < nargs; i++)
{
- if (LIMM_P (X_C (insn)))
- frame_size = codestream_get ();
- else if (SHIMM_P (X_C (insn)))
- frame_size = X_D (insn);
- else
- return -1;
- if (frame_size < 0)
- return -1;
+ unsigned int len = TYPE_LENGTH (value_type (args[i]));
+ unsigned int space = align_up (len, 4);
- codestream_get ();
+ total_space += space;
- /* This sequence is used to get the address of the return
- buffer for a function that returns a structure. */
- insn = codestream_peek ();
- if ((insn & OPMASK) == 0x60000000)
- codestream_get ();
+ arc_debug_printf ("arg %d: %u bytes -> %u", i, len, space);
}
- /* Frameless fn. */
- else
+
+ /* Allocate a buffer to hold a memory image of the arguments. */
+ gdb_byte *memory_image = XCNEWVEC (gdb_byte, total_space);
+
+ /* Now copy all of the arguments into the buffer, correctly aligned. */
+ gdb_byte *data = memory_image;
+ for (int i = 0; i < nargs; i++)
{
- frame_size = 0;
+ unsigned int len = TYPE_LENGTH (value_type (args[i]));
+ unsigned int space = align_up (len, 4);
+
+ memcpy (data, value_contents (args[i]).data (), (size_t) len);
+ arc_debug_printf ("copying arg %d, val 0x%08x, len %d to mem",
+ i, *((int *) value_contents (args[i]).data ()),
+ len);
+
+ data += space;
}
+
+ /* Now load as much as possible of the memory image into registers. */
+ data = memory_image;
+ while (arg_reg <= ARC_LAST_ARG_REGNUM)
+ {
+ arc_debug_printf ("passing 0x%02x%02x%02x%02x in register R%d",
+ data[0], data[1], data[2], data[3], arg_reg);
+
+ /* Note we don't use write_unsigned here, since that would convert
+ the byte order, but we are already in the correct byte order. */
+ regcache->cooked_write (arg_reg, data);
+
+ data += ARC_REGISTER_SIZE;
+ total_space -= ARC_REGISTER_SIZE;
+
+ /* All the data is now in registers. */
+ if (total_space == 0)
+ break;
+
+ arg_reg++;
+ }
+
+ /* If there is any data left, push it onto the stack (in a single write
+ operation). */
+ if (total_space > 0)
+ {
+ arc_debug_printf ("passing %d bytes on stack\n", total_space);
+
+ sp -= total_space;
+ write_memory (sp, data, (int) total_space);
+ }
+
+ xfree (memory_image);
}
- /* If we found a "sub sp,sp,N" and nothing else, it may or may not be a
- stdarg fn. The stdarg decrement is not treated as part of the frame size,
- so we have a dilemma: what do we return? For now, if we get a
- "sub sp,sp,N" and nothing else assume this isn't a stdarg fn. One way
- to fix this completely would be to add a bit to the function descriptor
- that says the function is a stdarg function. */
+ /* Finally, update the SP register. */
+ regcache_cooked_write_unsigned (regcache, gdbarch_sp_regnum (gdbarch), sp);
- if (frame_size < 0 && maybe_stdarg_decr > 0)
- return maybe_stdarg_decr;
- return frame_size;
+ return sp;
}
-/* Given a pc value, skip it forward past the function prologue by
- disassembling instructions that appear to be a prologue.
+/* Implement the "push_dummy_code" gdbarch method.
- If FRAMELESS_P is set, we are only testing to see if the function
- is frameless. If it is a frameless function, return PC unchanged.
- This allows a quicker answer. */
+ We don't actually push any code. We just identify where a breakpoint can
+ be inserted to which we are can return and the resume address where we
+ should be called.
-CORE_ADDR
-arc_skip_prologue (pc, frameless_p)
- CORE_ADDR pc;
- int frameless_p;
+ ARC does not necessarily have an executable stack, so we can't put the
+ return breakpoint there. Instead we put it at the entry point of the
+ function. This means the SP is unchanged.
+
+ SP is a current stack pointer FUNADDR is an address of the function to be
+ called. ARGS is arguments to pass. NARGS is a number of args to pass.
+ VALUE_TYPE is a type of value returned. REAL_PC is a resume address when
+ the function is called. BP_ADDR is an address where breakpoint should be
+ set. Returns the updated stack pointer. */
+
+static CORE_ADDR
+arc_push_dummy_code (struct gdbarch *gdbarch, CORE_ADDR sp, CORE_ADDR funaddr,
+ struct value **args, int nargs, struct type *value_type,
+ CORE_ADDR *real_pc, CORE_ADDR *bp_addr,
+ struct regcache *regcache)
+{
+ *real_pc = funaddr;
+ *bp_addr = entry_point_address ();
+ return sp;
+}
+
+/* Implement the "cannot_fetch_register" gdbarch method. */
+
+static int
+arc_cannot_fetch_register (struct gdbarch *gdbarch, int regnum)
+{
+ /* Assume that register is readable if it is unknown. LIMM and RESERVED are
+ not real registers, but specific register numbers. They are available as
+ regnums to align architectural register numbers with GDB internal regnums,
+ but they shouldn't appear in target descriptions generated by
+ GDB-servers. */
+ switch (regnum)
+ {
+ case ARC_RESERVED_REGNUM:
+ case ARC_LIMM_REGNUM:
+ return true;
+ default:
+ return false;
+ }
+}
+
+/* Implement the "cannot_store_register" gdbarch method. */
+
+static int
+arc_cannot_store_register (struct gdbarch *gdbarch, int regnum)
{
- unsigned int insn;
- int i, frame_size;
+ /* Assume that register is writable if it is unknown. See comment in
+ arc_cannot_fetch_register about LIMM and RESERVED. */
+ switch (regnum)
+ {
+ case ARC_RESERVED_REGNUM:
+ case ARC_LIMM_REGNUM:
+ case ARC_PCL_REGNUM:
+ return true;
+ default:
+ return false;
+ }
+}
- if ((frame_size = arc_get_frame_setup (pc)) < 0)
- return (pc);
+/* Get the return value of a function from the registers/memory used to
+ return it, according to the convention used by the ABI - 4-bytes values are
+ in the R0, while 8-byte values are in the R0-R1.
- if (frameless_p)
- return frame_size == 0 ? pc : codestream_tell ();
+ TODO: This implementation ignores the case of "complex double", where
+ according to ABI, value is returned in the R0-R3 registers.
- /* Skip over register saves. */
- for (i = 0; i < 8; i++)
+ TYPE is a returned value's type. VALBUF is a buffer for the returned
+ value. */
+
+static void
+arc_extract_return_value (struct gdbarch *gdbarch, struct type *type,
+ struct regcache *regcache, gdb_byte *valbuf)
+{
+ unsigned int len = TYPE_LENGTH (type);
+
+ arc_debug_printf ("called");
+
+ if (len <= ARC_REGISTER_SIZE)
{
- insn = codestream_peek ();
- if ((insn & BUILD_INSN (-1, 0, -1, 0, 0))
- != BUILD_INSN (2, 0, SP_REGNUM, 0, 0))
- break; /* not st insn */
- if (!ARC_CALL_SAVED_REG (X_C (insn)))
- break;
- codestream_get ();
+ ULONGEST val;
+
+ /* Get the return value from one register. */
+ regcache_cooked_read_unsigned (regcache, ARC_R0_REGNUM, &val);
+ store_unsigned_integer (valbuf, (int) len,
+ gdbarch_byte_order (gdbarch), val);
+
+ arc_debug_printf ("returning 0x%s", phex (val, ARC_REGISTER_SIZE));
}
+ else if (len <= ARC_REGISTER_SIZE * 2)
+ {
+ ULONGEST low, high;
- return codestream_tell ();
+ /* Get the return value from two registers. */
+ regcache_cooked_read_unsigned (regcache, ARC_R0_REGNUM, &low);
+ regcache_cooked_read_unsigned (regcache, ARC_R1_REGNUM, &high);
+
+ store_unsigned_integer (valbuf, ARC_REGISTER_SIZE,
+ gdbarch_byte_order (gdbarch), low);
+ store_unsigned_integer (valbuf + ARC_REGISTER_SIZE,
+ (int) len - ARC_REGISTER_SIZE,
+ gdbarch_byte_order (gdbarch), high);
+
+ arc_debug_printf ("returning 0x%s%s",
+ phex (high, ARC_REGISTER_SIZE),
+ phex (low, ARC_REGISTER_SIZE));
+ }
+ else
+ error (_("arc: extract_return_value: type length %u too large"), len);
}
-/* Return the return address for a frame.
- This is used to implement FRAME_SAVED_PC.
- This is taken from frameless_look_for_prologue. */
-CORE_ADDR
-arc_frame_saved_pc (frame)
- struct frame_info *frame;
+/* Store the return value of a function into the registers/memory used to
+ return it, according to the convention used by the ABI.
+
+ TODO: This implementation ignores the case of "complex double", where
+ according to ABI, value is returned in the R0-R3 registers.
+
+ TYPE is a returned value's type. VALBUF is a buffer with the value to
+ return. */
+
+static void
+arc_store_return_value (struct gdbarch *gdbarch, struct type *type,
+ struct regcache *regcache, const gdb_byte *valbuf)
{
- CORE_ADDR func_start;
- unsigned int insn;
+ unsigned int len = TYPE_LENGTH (type);
+
+ arc_debug_printf ("called");
- func_start = get_pc_function_start (frame->pc) + FUNCTION_START_OFFSET;
- if (func_start == 0)
+ if (len <= ARC_REGISTER_SIZE)
{
- /* Best guess. */
- return ARC_PC_TO_REAL_ADDRESS (read_memory_integer (FRAME_FP (frame) + 4, 4));
+ ULONGEST val;
+
+ /* Put the return value into one register. */
+ val = extract_unsigned_integer (valbuf, (int) len,
+ gdbarch_byte_order (gdbarch));
+ regcache_cooked_write_unsigned (regcache, ARC_R0_REGNUM, val);
+
+ arc_debug_printf ("storing 0x%s", phex (val, ARC_REGISTER_SIZE));
}
+ else if (len <= ARC_REGISTER_SIZE * 2)
+ {
+ ULONGEST low, high;
- /* The authority for what appears here is the home-grown ABI.
- The most recent version is 1.2. */
+ /* Put the return value into two registers. */
+ low = extract_unsigned_integer (valbuf, ARC_REGISTER_SIZE,
+ gdbarch_byte_order (gdbarch));
+ high = extract_unsigned_integer (valbuf + ARC_REGISTER_SIZE,
+ (int) len - ARC_REGISTER_SIZE,
+ gdbarch_byte_order (gdbarch));
- insn = setup_prologue_scan (func_start);
+ regcache_cooked_write_unsigned (regcache, ARC_R0_REGNUM, low);
+ regcache_cooked_write_unsigned (regcache, ARC_R1_REGNUM, high);
- /* First insn may be "sub sp,sp,N" if stdarg fn. */
- if ((insn & BUILD_INSN (-1, -1, -1, -1, 0))
- == BUILD_INSN (10, SP_REGNUM, SP_REGNUM, SHIMM_REGNUM, 0))
- insn = codestream_get ();
+ arc_debug_printf ("storing 0x%s%s",
+ phex (high, ARC_REGISTER_SIZE),
+ phex (low, ARC_REGISTER_SIZE));
+ }
+ else
+ error (_("arc_store_return_value: type length too large."));
+}
- /* If the next insn is "st blink,[sp,4]" we can get blink from there.
- Otherwise this is a leaf function and we can use blink. Note that
- this still allows for the case where a leaf function saves/clobbers/
- restores blink. */
+/* Implement the "get_longjmp_target" gdbarch method. */
+
+static int
+arc_get_longjmp_target (struct frame_info *frame, CORE_ADDR *pc)
+{
+ arc_debug_printf ("called");
+
+ struct gdbarch *gdbarch = get_frame_arch (frame);
+ arc_gdbarch_tdep *tdep = (arc_gdbarch_tdep *) gdbarch_tdep (gdbarch);
+ int pc_offset = tdep->jb_pc * ARC_REGISTER_SIZE;
+ gdb_byte buf[ARC_REGISTER_SIZE];
+ CORE_ADDR jb_addr = get_frame_register_unsigned (frame, ARC_FIRST_ARG_REGNUM);
+
+ if (target_read_memory (jb_addr + pc_offset, buf, ARC_REGISTER_SIZE))
+ return 0; /* Failed to read from memory. */
+
+ *pc = extract_unsigned_integer (buf, ARC_REGISTER_SIZE,
+ gdbarch_byte_order (gdbarch));
+ return 1;
+}
+
+/* Implement the "return_value" gdbarch method. */
+
+static enum return_value_convention
+arc_return_value (struct gdbarch *gdbarch, struct value *function,
+ struct type *valtype, struct regcache *regcache,
+ gdb_byte *readbuf, const gdb_byte *writebuf)
+{
+ /* If the return type is a struct, or a union, or would occupy more than two
+ registers, the ABI uses the "struct return convention": the calling
+ function passes a hidden first parameter to the callee (in R0). That
+ parameter is the address at which the value being returned should be
+ stored. Otherwise, the result is returned in registers. */
+ int is_struct_return = (valtype->code () == TYPE_CODE_STRUCT
+ || valtype->code () == TYPE_CODE_UNION
+ || TYPE_LENGTH (valtype) > 2 * ARC_REGISTER_SIZE);
+
+ arc_debug_printf ("readbuf = %s, writebuf = %s",
+ host_address_to_string (readbuf),
+ host_address_to_string (writebuf));
+
+ if (writebuf != NULL)
+ {
+ /* Case 1. GDB should not ask us to set a struct return value: it
+ should know the struct return location and write the value there
+ itself. */
+ gdb_assert (!is_struct_return);
+ arc_store_return_value (gdbarch, valtype, regcache, writebuf);
+ }
+ else if (readbuf != NULL)
+ {
+ /* Case 2. GDB should not ask us to get a struct return value: it
+ should know the struct return location and read the value from there
+ itself. */
+ gdb_assert (!is_struct_return);
+ arc_extract_return_value (gdbarch, valtype, regcache, readbuf);
+ }
- if ((insn & BUILD_INSN (-1, 0, -1, -1, -1)) /* st blink,[sp,4] */
- != BUILD_INSN (2, 0, SP_REGNUM, BLINK_REGNUM, 4))
- return ARC_PC_TO_REAL_ADDRESS (read_register (BLINK_REGNUM));
+ return (is_struct_return
+ ? RETURN_VALUE_STRUCT_CONVENTION
+ : RETURN_VALUE_REGISTER_CONVENTION);
+}
+
+/* Return the base address of the frame. For ARC, the base address is the
+ frame pointer. */
+
+static CORE_ADDR
+arc_frame_base_address (struct frame_info *this_frame, void **prologue_cache)
+{
+ return (CORE_ADDR) get_frame_register_unsigned (this_frame, ARC_FP_REGNUM);
+}
+
+/* Helper function that returns valid pv_t for an instruction operand:
+ either a register or a constant. */
+
+static pv_t
+arc_pv_get_operand (pv_t *regs, const struct arc_instruction &insn, int operand)
+{
+ if (insn.operands[operand].kind == ARC_OPERAND_KIND_REG)
+ return regs[insn.operands[operand].value];
else
- return ARC_PC_TO_REAL_ADDRESS (read_memory_integer (FRAME_FP (frame) + 4, 4));
+ return pv_constant (arc_insn_get_operand_value (insn, operand));
}
-/*
- * Parse the first few instructions of the function to see
- * what registers were stored.
- *
- * The startup sequence can be at the start of the function.
- * 'st blink,[sp+4], st fp,[sp], mov fp,sp'
- *
- * Local space is allocated just below by sub sp,sp,nnn.
- * Next, the registers used by this function are stored (as offsets from sp).
- */
+/* Determine whether the given disassembled instruction may be part of a
+ function prologue. If it is, the information in the frame unwind cache will
+ be updated. */
-void
-frame_find_saved_regs (fip, fsrp)
- struct frame_info *fip;
- struct frame_saved_regs *fsrp;
+static bool
+arc_is_in_prologue (struct gdbarch *gdbarch, const struct arc_instruction &insn,
+ pv_t *regs, struct pv_area *stack)
{
- long locals;
- unsigned int insn;
- CORE_ADDR dummy_bottom;
- CORE_ADDR adr;
- int i, regnum, offset;
+ /* It might be that currently analyzed address doesn't contain an
+ instruction, hence INSN is not valid. It likely means that address points
+ to a data, non-initialized memory, or middle of a 32-bit instruction. In
+ practice this may happen if GDB connects to a remote target that has
+ non-zeroed memory. GDB would read PC value and would try to analyze
+ prologue, but there is no guarantee that memory contents at the address
+ specified in PC is address is a valid instruction. There is not much that
+ that can be done about that. */
+ if (!insn.valid)
+ return false;
+
+ /* Branch/jump or a predicated instruction. */
+ if (insn.is_control_flow || insn.condition_code != ARC_CC_AL)
+ return false;
+
+ /* Store of some register. May or may not update base address register. */
+ if (insn.insn_class == STORE || insn.insn_class == PUSH)
+ {
+ /* There is definitely at least one operand - register/value being
+ stored. */
+ gdb_assert (insn.operands_count > 0);
+
+ /* Store at some constant address. */
+ if (insn.operands_count > 1
+ && insn.operands[1].kind != ARC_OPERAND_KIND_REG)
+ return false;
+
+ /* Writeback modes:
+ Mode Address used Writeback value
+ --------------------------------------------------
+ No reg + offset no
+ A/AW reg + offset reg + offset
+ AB reg reg + offset
+ AS reg + (offset << scaling) no
+
+ "PUSH reg" is an alias to "ST.AW reg, [SP, -4]" encoding. However
+ 16-bit PUSH_S is a distinct instruction encoding, where offset and
+ base register are implied through opcode. */
+
+ /* Register with base memory address. */
+ int base_reg = arc_insn_get_memory_base_reg (insn);
+
+ /* Address where to write. arc_insn_get_memory_offset returns scaled
+ value for ARC_WRITEBACK_AS. */
+ pv_t addr;
+ if (insn.writeback_mode == ARC_WRITEBACK_AB)
+ addr = regs[base_reg];
+ else
+ addr = pv_add_constant (regs[base_reg],
+ arc_insn_get_memory_offset (insn));
- memset (fsrp, 0, sizeof *fsrp);
+ if (stack->store_would_trash (addr))
+ return false;
- /* If frame is the end of a dummy, compute where the beginning would be. */
- dummy_bottom = fip->frame - 4 - REGISTER_BYTES - CALL_DUMMY_LENGTH;
+ if (insn.data_size_mode != ARC_SCALING_D)
+ {
+ /* Find the value being stored. */
+ pv_t store_value = arc_pv_get_operand (regs, insn, 0);
+
+ /* What is the size of a the stored value? */
+ CORE_ADDR size;
+ if (insn.data_size_mode == ARC_SCALING_B)
+ size = 1;
+ else if (insn.data_size_mode == ARC_SCALING_H)
+ size = 2;
+ else
+ size = ARC_REGISTER_SIZE;
- /* Check if the PC is in the stack, in a dummy frame. */
- if (dummy_bottom <= fip->pc && fip->pc <= fip->frame)
+ stack->store (addr, size, store_value);
+ }
+ else
+ {
+ if (insn.operands[0].kind == ARC_OPERAND_KIND_REG)
+ {
+ /* If this is a double store, than write N+1 register as well. */
+ pv_t store_value1 = regs[insn.operands[0].value];
+ pv_t store_value2 = regs[insn.operands[0].value + 1];
+ stack->store (addr, ARC_REGISTER_SIZE, store_value1);
+ stack->store (pv_add_constant (addr, ARC_REGISTER_SIZE),
+ ARC_REGISTER_SIZE, store_value2);
+ }
+ else
+ {
+ pv_t store_value
+ = pv_constant (arc_insn_get_operand_value (insn, 0));
+ stack->store (addr, ARC_REGISTER_SIZE * 2, store_value);
+ }
+ }
+
+ /* Is base register updated? */
+ if (insn.writeback_mode == ARC_WRITEBACK_A
+ || insn.writeback_mode == ARC_WRITEBACK_AB)
+ regs[base_reg] = pv_add_constant (regs[base_reg],
+ arc_insn_get_memory_offset (insn));
+
+ return true;
+ }
+ else if (insn.insn_class == MOVE)
{
- /* all regs were saved by push_call_dummy () */
- adr = fip->frame;
- for (i = 0; i < NUM_REGS; i++)
+ gdb_assert (insn.operands_count == 2);
+
+ /* Destination argument can be "0", so nothing will happen. */
+ if (insn.operands[0].kind == ARC_OPERAND_KIND_REG)
{
- adr -= REGISTER_RAW_SIZE (i);
- fsrp->regs[i] = adr;
+ int dst_regnum = insn.operands[0].value;
+ regs[dst_regnum] = arc_pv_get_operand (regs, insn, 1);
}
- return;
+ return true;
}
+ else if (insn.insn_class == SUB)
+ {
+ gdb_assert (insn.operands_count == 3);
- locals = arc_get_frame_setup (get_pc_function_start (fip->pc));
+ /* SUB 0,b,c. */
+ if (insn.operands[0].kind != ARC_OPERAND_KIND_REG)
+ return true;
- if (locals >= 0)
+ int dst_regnum = insn.operands[0].value;
+ regs[dst_regnum] = pv_subtract (arc_pv_get_operand (regs, insn, 1),
+ arc_pv_get_operand (regs, insn, 2));
+ return true;
+ }
+ else if (insn.insn_class == ENTER)
{
- /* Set `adr' to the value of `sp'. */
- adr = fip->frame - locals;
- for (i = 0; i < 8; i++)
+ /* ENTER_S is a prologue-in-instruction - it saves all callee-saved
+ registers according to given arguments thus greatly reducing code
+ size. Which registers will be actually saved depends on arguments.
+
+ ENTER_S {R13-...,FP,BLINK} stores registers in following order:
+
+ new SP ->
+ BLINK
+ R13
+ R14
+ R15
+ ...
+ FP
+ old SP ->
+
+ There are up to three arguments for this opcode, as presented by ARC
+ disassembler:
+ 1) amount of general-purpose registers to be saved - this argument is
+ always present even when it is 0;
+ 2) FP register number (27) if FP has to be stored, otherwise argument
+ is not present;
+ 3) BLINK register number (31) if BLINK has to be stored, otherwise
+ argument is not present. If both FP and BLINK are stored, then FP
+ is present before BLINK in argument list. */
+ gdb_assert (insn.operands_count > 0);
+
+ int regs_saved = arc_insn_get_operand_value (insn, 0);
+
+ bool is_fp_saved;
+ if (insn.operands_count > 1)
+ is_fp_saved = (insn.operands[1].value == ARC_FP_REGNUM);
+ else
+ is_fp_saved = false;
+
+ bool is_blink_saved;
+ if (insn.operands_count > 1)
+ is_blink_saved = (insn.operands[insn.operands_count - 1].value
+ == ARC_BLINK_REGNUM);
+ else
+ is_blink_saved = false;
+
+ /* Amount of bytes to be allocated to store specified registers. */
+ CORE_ADDR st_size = ((regs_saved + is_fp_saved + is_blink_saved)
+ * ARC_REGISTER_SIZE);
+ pv_t new_sp = pv_add_constant (regs[ARC_SP_REGNUM], -st_size);
+
+ /* Assume that if the last register (closest to new SP) can be written,
+ then it is possible to write all of them. */
+ if (stack->store_would_trash (new_sp))
+ return false;
+
+ /* Current store address. */
+ pv_t addr = regs[ARC_SP_REGNUM];
+
+ if (is_fp_saved)
{
- insn = codestream_get ();
- if ((insn & BUILD_INSN (-1, 0, -1, 0, 0))
- != BUILD_INSN (2, 0, SP_REGNUM, 0, 0))
- break;
- regnum = X_C (insn);
- offset = X_D (insn);
- fsrp->regs[regnum] = adr + offset;
+ addr = pv_add_constant (addr, -ARC_REGISTER_SIZE);
+ stack->store (addr, ARC_REGISTER_SIZE, regs[ARC_FP_REGNUM]);
+ }
+
+ /* Registers are stored in backward order: from GP (R26) to R13. */
+ for (int i = ARC_R13_REGNUM + regs_saved - 1; i >= ARC_R13_REGNUM; i--)
+ {
+ addr = pv_add_constant (addr, -ARC_REGISTER_SIZE);
+ stack->store (addr, ARC_REGISTER_SIZE, regs[i]);
+ }
+
+ if (is_blink_saved)
+ {
+ addr = pv_add_constant (addr, -ARC_REGISTER_SIZE);
+ stack->store (addr, ARC_REGISTER_SIZE,
+ regs[ARC_BLINK_REGNUM]);
}
+
+ gdb_assert (pv_is_identical (addr, new_sp));
+
+ regs[ARC_SP_REGNUM] = new_sp;
+
+ if (is_fp_saved)
+ regs[ARC_FP_REGNUM] = regs[ARC_SP_REGNUM];
+
+ return true;
}
- fsrp->regs[PC_REGNUM] = fip->frame + 4;
- fsrp->regs[FP_REGNUM] = fip->frame;
+ /* Some other architectures, like nds32 or arm, try to continue as far as
+ possible when building a prologue cache (as opposed to when skipping
+ prologue), so that cache will be as full as possible. However current
+ code for ARC doesn't recognize some instructions that may modify SP, like
+ ADD, AND, OR, etc, hence there is no way to guarantee that SP wasn't
+ clobbered by the skipped instruction. Potential existence of extension
+ instruction, which may do anything they want makes this even more complex,
+ so it is just better to halt on a first unrecognized instruction. */
+
+ return false;
}
-void
-push_dummy_frame ()
+/* Copy of gdb_buffered_insn_length_fprintf from disasm.c. */
+
+static int ATTRIBUTE_PRINTF (2, 3)
+arc_fprintf_disasm (void *stream, const char *format, ...)
{
- CORE_ADDR sp = read_register (SP_REGNUM);
- int regnum;
- char regbuf[MAX_REGISTER_RAW_SIZE];
+ return 0;
+}
- read_register_gen (PC_REGNUM, regbuf);
- write_memory (sp + 4, regbuf, REGISTER_SIZE);
- read_register_gen (FP_REGNUM, regbuf);
- write_memory (sp, regbuf, REGISTER_SIZE);
- write_register (FP_REGNUM, sp);
- for (regnum = 0; regnum < NUM_REGS; regnum++)
+struct disassemble_info
+arc_disassemble_info (struct gdbarch *gdbarch)
+{
+ struct disassemble_info di;
+ init_disassemble_info (&di, &null_stream, arc_fprintf_disasm);
+ di.arch = gdbarch_bfd_arch_info (gdbarch)->arch;
+ di.mach = gdbarch_bfd_arch_info (gdbarch)->mach;
+ di.endian = gdbarch_byte_order (gdbarch);
+ di.read_memory_func = [](bfd_vma memaddr, gdb_byte *myaddr,
+ unsigned int len, struct disassemble_info *info)
{
- read_register_gen (regnum, regbuf);
- sp = push_bytes (sp, regbuf, REGISTER_RAW_SIZE (regnum));
- }
- sp += (2 * REGISTER_SIZE);
- write_register (SP_REGNUM, sp);
+ return target_read_code (memaddr, myaddr, len);
+ };
+ return di;
}
-void
-pop_frame ()
+/* Analyze the prologue and update the corresponding frame cache for the frame
+ unwinder for unwinding frames that doesn't have debug info. In such
+ situation GDB attempts to parse instructions in the prologue to understand
+ where each register is saved.
+
+ If CACHE is not NULL, then it will be filled with information about saved
+ registers.
+
+ There are several variations of prologue which GDB may encounter. "Full"
+ prologue looks like this:
+
+ sub sp,sp,<imm> ; Space for variadic arguments.
+ push blink ; Store return address.
+ push r13 ; Store callee saved registers (up to R26/GP).
+ push r14
+ push fp ; Store frame pointer.
+ mov fp,sp ; Update frame pointer.
+ sub sp,sp,<imm> ; Create space for local vars on the stack.
+
+ Depending on compiler options lots of things may change:
+
+ 1) BLINK is not saved in leaf functions.
+ 2) Frame pointer is not saved and updated if -fomit-frame-pointer is used.
+ 3) 16-bit versions of those instructions may be used.
+ 4) Instead of a sequence of several push'es, compiler may instead prefer to
+ do one subtract on stack pointer and then store registers using normal
+ store, that doesn't update SP. Like this:
+
+
+ sub sp,sp,8 ; Create space for callee-saved registers.
+ st r13,[sp,4] ; Store callee saved registers (up to R26/GP).
+ st r14,[sp,0]
+
+ 5) ENTER_S instruction can encode most of prologue sequence in one
+ instruction (except for those subtracts for variadic arguments and local
+ variables).
+ 6) GCC may use "millicode" functions from libgcc to store callee-saved
+ registers with minimal code-size requirements. This function currently
+ doesn't support this.
+
+ ENTRYPOINT is a function entry point where prologue starts.
+
+ LIMIT_PC is a maximum possible end address of prologue (meaning address
+ of first instruction after the prologue). It might also point to the middle
+ of prologue if execution has been stopped by the breakpoint at this address
+ - in this case debugger should analyze prologue only up to this address,
+ because further instructions haven't been executed yet.
+
+ Returns address of the first instruction after the prologue. */
+
+static CORE_ADDR
+arc_analyze_prologue (struct gdbarch *gdbarch, const CORE_ADDR entrypoint,
+ const CORE_ADDR limit_pc, struct arc_frame_cache *cache)
{
- struct frame_info *frame = get_current_frame ();
- CORE_ADDR fp;
- int regnum;
- struct frame_saved_regs fsr;
- char regbuf[MAX_REGISTER_RAW_SIZE];
+ arc_debug_printf ("entrypoint=%s, limit_pc=%s",
+ paddress (gdbarch, entrypoint),
+ paddress (gdbarch, limit_pc));
+
+ /* Prologue values. Only core registers can be stored. */
+ pv_t regs[ARC_LAST_CORE_REGNUM + 1];
+ for (int i = 0; i <= ARC_LAST_CORE_REGNUM; i++)
+ regs[i] = pv_register (i, 0);
+ pv_area stack (ARC_SP_REGNUM, gdbarch_addr_bit (gdbarch));
- fp = FRAME_FP (frame);
- get_frame_saved_regs (frame, &fsr);
- for (regnum = 0; regnum < NUM_REGS; regnum++)
+ CORE_ADDR current_prologue_end = entrypoint;
+
+ /* Look at each instruction in the prologue. */
+ while (current_prologue_end < limit_pc)
{
- CORE_ADDR adr;
- adr = fsr.regs[regnum];
- if (adr)
+ struct arc_instruction insn;
+ struct disassemble_info di = arc_disassemble_info (gdbarch);
+ arc_insn_decode (current_prologue_end, &di, arc_delayed_print_insn,
+ &insn);
+
+ if (arc_debug)
+ arc_insn_dump (insn);
+
+ /* If this instruction is in the prologue, fields in the cache will be
+ updated, and the saved registers mask may be updated. */
+ if (!arc_is_in_prologue (gdbarch, insn, regs, &stack))
{
- read_memory (adr, regbuf, REGISTER_RAW_SIZE (regnum));
- write_register_bytes (REGISTER_BYTE (regnum), regbuf,
- REGISTER_RAW_SIZE (regnum));
+ /* Found an instruction that is not in the prologue. */
+ arc_debug_printf ("End of prologue reached at address %s",
+ paddress (gdbarch, insn.address));
+ break;
}
+
+ current_prologue_end = arc_insn_get_linear_next_pc (insn);
}
- write_register (FP_REGNUM, read_memory_integer (fp, 4));
- write_register (PC_REGNUM, read_memory_integer (fp + 4, 4));
- write_register (SP_REGNUM, fp + 8);
- flush_cached_frames ();
-}
-\f
-/* Simulate single-step. */
-
-typedef enum
-{
- NORMAL4, /* a normal 4 byte insn */
- NORMAL8, /* a normal 8 byte insn */
- BRANCH4, /* a 4 byte branch insn, including ones without delay slots */
- BRANCH8, /* an 8 byte branch insn, including ones with delay slots */
-}
-insn_type;
-
-/* Return the type of INSN and store in TARGET the destination address of a
- branch if this is one. */
-/* ??? Need to verify all cases are properly handled. */
-
-static insn_type
-get_insn_type (insn, pc, target)
- unsigned long insn;
- CORE_ADDR pc, *target;
-{
- unsigned long limm;
-
- switch (insn >> 27)
- {
- case 0:
- case 1:
- case 2: /* load/store insns */
- if (LIMM_P (X_A (insn))
- || LIMM_P (X_B (insn))
- || LIMM_P (X_C (insn)))
- return NORMAL8;
- return NORMAL4;
- case 4:
- case 5:
- case 6: /* branch insns */
- *target = pc + 4 + X_L (insn);
- /* ??? It isn't clear that this is always the right answer.
- The problem occurs when the next insn is an 8 byte insn. If the
- branch is conditional there's no worry as there shouldn't be an 8
- byte insn following. The programmer may be cheating if s/he knows
- the branch will never be taken, but we don't deal with that.
- Note that the programmer is also allowed to play games by putting
- an insn with long immediate data in the delay slot and then duplicate
- the long immediate data at the branch target. Ugh! */
- if (X_N (insn) == 0)
- return BRANCH4;
- return BRANCH8;
- case 7: /* jump insns */
- if (LIMM_P (X_B (insn)))
+
+ if (cache != NULL)
+ {
+ /* Figure out if it is a frame pointer or just a stack pointer. */
+ if (pv_is_register (regs[ARC_FP_REGNUM], ARC_SP_REGNUM))
{
- limm = read_memory_integer (pc + 4, 4);
- *target = ARC_PC_TO_REAL_ADDRESS (limm);
- return BRANCH8;
+ cache->frame_base_reg = ARC_FP_REGNUM;
+ cache->frame_base_offset = -regs[ARC_FP_REGNUM].k;
}
- if (SHIMM_P (X_B (insn)))
- *target = ARC_PC_TO_REAL_ADDRESS (X_D (insn));
else
- *target = ARC_PC_TO_REAL_ADDRESS (read_register (X_B (insn)));
- if (X_Q (insn) == 0 && X_N (insn) == 0)
- return BRANCH4;
- return BRANCH8;
- default: /* arithmetic insns, etc. */
- if (LIMM_P (X_A (insn))
- || LIMM_P (X_B (insn))
- || LIMM_P (X_C (insn)))
- return NORMAL8;
- return NORMAL4;
+ {
+ cache->frame_base_reg = ARC_SP_REGNUM;
+ cache->frame_base_offset = -regs[ARC_SP_REGNUM].k;
+ }
+
+ /* Assign offset from old SP to all saved registers. */
+ for (int i = 0; i <= ARC_LAST_CORE_REGNUM; i++)
+ {
+ CORE_ADDR offset;
+ if (stack.find_reg (gdbarch, i, &offset))
+ cache->saved_regs[i].set_addr (offset);
+ }
}
+
+ return current_prologue_end;
}
-/* single_step() is called just before we want to resume the inferior, if we
- want to single-step it but there is no hardware or kernel single-step
- support. We find all the possible targets of the coming instruction and
- breakpoint them.
+/* Estimated maximum prologue length in bytes. This should include:
+ 1) Store instruction for each callee-saved register (R25 - R13 + 1)
+ 2) Two instructions for FP
+ 3) One for BLINK
+ 4) Three substract instructions for SP (for variadic args, for
+ callee saved regs and for local vars) and assuming that those SUB use
+ long-immediate (hence double length).
+ 5) Stores of arguments registers are considered part of prologue too
+ (R7 - R1 + 1).
+ This is quite an extreme case, because even with -O0 GCC will collapse first
+ two SUBs into one and long immediate values are quite unlikely to appear in
+ this case, but still better to overshoot a bit - prologue analysis will
+ anyway stop at the first instruction that doesn't fit prologue, so this
+ limit will be rarely reached. */
+
+const static int MAX_PROLOGUE_LENGTH
+ = 4 * (ARC_R25_REGNUM - ARC_R13_REGNUM + 1 + 2 + 1 + 6
+ + ARC_LAST_ARG_REGNUM - ARC_FIRST_ARG_REGNUM + 1);
+
+/* Implement the "skip_prologue" gdbarch method.
+
+ Skip the prologue for the function at PC. This is done by checking from
+ the line information read from the DWARF, if possible; otherwise, we scan
+ the function prologue to find its end. */
+
+static CORE_ADDR
+arc_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR pc)
+{
+ arc_debug_printf ("pc = %s", paddress (gdbarch, pc));
- single_step is also called just after the inferior stops. If we had
- set up a simulated single-step, we undo our damage. */
+ CORE_ADDR func_addr;
+ const char *func_name;
-void
-arc_software_single_step (ignore, insert_breakpoints_p)
- enum target_signal ignore; /* sig but we don't need it */
- int insert_breakpoints_p;
+ /* See what the symbol table says. */
+ if (find_pc_partial_function (pc, &func_name, &func_addr, NULL))
+ {
+ /* Found a function. */
+ CORE_ADDR postprologue_pc
+ = skip_prologue_using_sal (gdbarch, func_addr);
+
+ if (postprologue_pc != 0)
+ return std::max (pc, postprologue_pc);
+ }
+
+ /* No prologue info in symbol table, have to analyze prologue. */
+
+ /* Find an upper limit on the function prologue using the debug
+ information. If there is no debug information about prologue end, then
+ skip_prologue_using_sal will return 0. */
+ CORE_ADDR limit_pc = skip_prologue_using_sal (gdbarch, pc);
+
+ /* If there is no debug information at all, it is required to give some
+ semi-arbitrary hard limit on amount of bytes to scan during prologue
+ analysis. */
+ if (limit_pc == 0)
+ limit_pc = pc + MAX_PROLOGUE_LENGTH;
+
+ /* Find the address of the first instruction after the prologue by scanning
+ through it - no other information is needed, so pass NULL as a cache. */
+ return arc_analyze_prologue (gdbarch, pc, limit_pc, NULL);
+}
+
+/* Implement the "print_insn" gdbarch method.
+
+ arc_get_disassembler () may return different functions depending on bfd
+ type, so it is not possible to pass print_insn directly to
+ set_gdbarch_print_insn (). Instead this wrapper function is used. It also
+ may be used by other functions to get disassemble_info for address. It is
+ important to note, that those print_insn from opcodes always print
+ instruction to the stream specified in the INFO. If this is not desired,
+ then either `print_insn` function in INFO should be set to some function
+ that will not print, or `stream` should be different from standard
+ gdb_stdlog. */
+
+int
+arc_delayed_print_insn (bfd_vma addr, struct disassemble_info *info)
{
- static CORE_ADDR next_pc, target;
- static int brktrg_p;
- typedef char binsn_quantum[BREAKPOINT_MAX];
- static binsn_quantum break_mem[2];
+ /* Standard BFD "machine number" field allows libopcodes disassembler to
+ distinguish ARC 600, 700 and v2 cores, however v2 encompasses both ARC EM
+ and HS, which have some difference between. There are two ways to specify
+ what is the target core:
+ 1) via the disassemble_info->disassembler_options;
+ 2) otherwise libopcodes will use private (architecture-specific) ELF
+ header.
+
+ Using disassembler_options is preferable, because it comes directly from
+ GDBserver which scanned an actual ARC core identification info. However,
+ not all GDBservers report core architecture, so as a fallback GDB still
+ should support analysis of ELF header. The libopcodes disassembly code
+ uses the section to find the BFD and the BFD to find the ELF header,
+ therefore this function should set disassemble_info->section properly.
+
+ disassembler_options was already set by non-target specific code with
+ proper options obtained via gdbarch_disassembler_options ().
+
+ This function might be called multiple times in a sequence, reusing same
+ disassemble_info. */
+ if ((info->disassembler_options == NULL) && (info->section == NULL))
+ {
+ struct obj_section *s = find_pc_section (addr);
+ if (s != NULL)
+ info->section = s->the_bfd_section;
+ }
+
+ return default_print_insn (addr, info);
+}
- if (insert_breakpoints_p)
+/* Baremetal breakpoint instructions.
+
+ ARC supports both big- and little-endian. However, instructions for
+ little-endian processors are encoded in the middle-endian: half-words are
+ in big-endian, while bytes inside the half-words are in little-endian; data
+ is represented in the "normal" little-endian. Big-endian processors treat
+ data and code identically.
+
+ Assuming the number 0x01020304, it will be presented this way:
+
+ Address : N N+1 N+2 N+3
+ little-endian : 0x04 0x03 0x02 0x01
+ big-endian : 0x01 0x02 0x03 0x04
+ ARC middle-endian : 0x02 0x01 0x04 0x03
+ */
+
+static const gdb_byte arc_brk_s_be[] = { 0x7f, 0xff };
+static const gdb_byte arc_brk_s_le[] = { 0xff, 0x7f };
+static const gdb_byte arc_brk_be[] = { 0x25, 0x6f, 0x00, 0x3f };
+static const gdb_byte arc_brk_le[] = { 0x6f, 0x25, 0x3f, 0x00 };
+
+/* For ARC ELF, breakpoint uses the 16-bit BRK_S instruction, which is 0x7fff
+ (little endian) or 0xff7f (big endian). We used to insert BRK_S even
+ instead of 32-bit instructions, which works mostly ok, unless breakpoint is
+ inserted into delay slot instruction. In this case if branch is taken
+ BLINK value will be set to address of instruction after delay slot, however
+ if we replaced 32-bit instruction in delay slot with 16-bit long BRK_S,
+ then BLINK value will have an invalid value - it will point to the address
+ after the BRK_S (which was there at the moment of branch execution) while
+ it should point to the address after the 32-bit long instruction. To avoid
+ such issues this function disassembles instruction at target location and
+ evaluates it value.
+
+ ARC 600 supports only 16-bit BRK_S.
+
+ NB: Baremetal GDB uses BRK[_S], while user-space GDB uses TRAP_S. BRK[_S]
+ is much better because it doesn't commit unlike TRAP_S, so it can be set in
+ delay slots; however it cannot be used in user-mode, hence usage of TRAP_S
+ in GDB for user-space. */
+
+/* Implement the "breakpoint_kind_from_pc" gdbarch method. */
+
+static int
+arc_breakpoint_kind_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pcptr)
+{
+ size_t length_with_limm = gdb_insn_length (gdbarch, *pcptr);
+
+ /* Replace 16-bit instruction with BRK_S, replace 32-bit instructions with
+ BRK. LIMM is part of instruction length, so it can be either 4 or 8
+ bytes for 32-bit instructions. */
+ if ((length_with_limm == 4 || length_with_limm == 8)
+ && !arc_mach_is_arc600 (gdbarch))
+ return sizeof (arc_brk_le);
+ else
+ return sizeof (arc_brk_s_le);
+}
+
+/* Implement the "sw_breakpoint_from_kind" gdbarch method. */
+
+static const gdb_byte *
+arc_sw_breakpoint_from_kind (struct gdbarch *gdbarch, int kind, int *size)
+{
+ gdb_assert (kind == 2 || kind == 4);
+ *size = kind;
+
+ if (kind == sizeof (arc_brk_le))
+ {
+ return ((gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
+ ? arc_brk_be
+ : arc_brk_le);
+ }
+ else
{
- insn_type type;
- CORE_ADDR pc;
- unsigned long insn;
+ return ((gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
+ ? arc_brk_s_be
+ : arc_brk_s_le);
+ }
+}
- pc = read_register (PC_REGNUM);
- insn = read_memory_integer (pc, 4);
- type = get_insn_type (insn, pc, &target);
+/* Implement the "frame_align" gdbarch method. */
- /* Always set a breakpoint for the insn after the branch. */
- next_pc = pc + ((type == NORMAL8 || type == BRANCH8) ? 8 : 4);
- target_insert_breakpoint (next_pc, break_mem[0]);
+static CORE_ADDR
+arc_frame_align (struct gdbarch *gdbarch, CORE_ADDR sp)
+{
+ return align_down (sp, 4);
+}
- brktrg_p = 0;
+/* Dump the frame info. Used for internal debugging only. */
- if ((type == BRANCH4 || type == BRANCH8)
- /* Watch out for branches to the following location.
- We just stored a breakpoint there and another call to
- target_insert_breakpoint will think the real insn is the
- breakpoint we just stored there. */
- && target != next_pc)
- {
- brktrg_p = 1;
- target_insert_breakpoint (target, break_mem[1]);
- }
+static void
+arc_print_frame_cache (struct gdbarch *gdbarch, const char *message,
+ struct arc_frame_cache *cache, int addresses_known)
+{
+ arc_debug_printf ("frame_info %s", message);
+ arc_debug_printf ("prev_sp = %s", paddress (gdbarch, cache->prev_sp));
+ arc_debug_printf ("frame_base_reg = %i", cache->frame_base_reg);
+ arc_debug_printf ("frame_base_offset = %s",
+ plongest (cache->frame_base_offset));
+
+ for (int i = 0; i <= ARC_BLINK_REGNUM; i++)
+ {
+ if (cache->saved_regs[i].is_addr ())
+ arc_debug_printf ("saved register %s at %s %s",
+ gdbarch_register_name (gdbarch, i),
+ (addresses_known) ? "address" : "offset",
+ paddress (gdbarch, cache->saved_regs[i].addr ()));
+ }
+}
+
+/* Frame unwinder for normal frames. */
+
+static struct arc_frame_cache *
+arc_make_frame_cache (struct frame_info *this_frame)
+{
+ arc_debug_printf ("called");
+ struct gdbarch *gdbarch = get_frame_arch (this_frame);
+
+ CORE_ADDR block_addr = get_frame_address_in_block (this_frame);
+ CORE_ADDR entrypoint, prologue_end;
+ if (find_pc_partial_function (block_addr, NULL, &entrypoint, &prologue_end))
+ {
+ struct symtab_and_line sal = find_pc_line (entrypoint, 0);
+ CORE_ADDR prev_pc = get_frame_pc (this_frame);
+ if (sal.line == 0)
+ /* No line info so use current PC. */
+ prologue_end = prev_pc;
+ else if (sal.end < prologue_end)
+ /* The next line begins after the function end. */
+ prologue_end = sal.end;
+
+ prologue_end = std::min (prologue_end, prev_pc);
}
else
{
- /* Remove breakpoints. */
- target_remove_breakpoint (next_pc, break_mem[0]);
+ /* If find_pc_partial_function returned nothing then there is no symbol
+ information at all for this PC. Currently it is assumed in this case
+ that current PC is entrypoint to function and try to construct the
+ frame from that. This is, probably, suboptimal, for example ARM
+ assumes in this case that program is inside the normal frame (with
+ frame pointer). ARC, perhaps, should try to do the same. */
+ entrypoint = get_frame_register_unsigned (this_frame,
+ gdbarch_pc_regnum (gdbarch));
+ prologue_end = entrypoint + MAX_PROLOGUE_LENGTH;
+ }
+
+ /* Allocate new frame cache instance and space for saved register info.
+ FRAME_OBSTACK_ZALLOC will initialize fields to zeroes. */
+ struct arc_frame_cache *cache
+ = FRAME_OBSTACK_ZALLOC (struct arc_frame_cache);
+ cache->saved_regs = trad_frame_alloc_saved_regs (this_frame);
- if (brktrg_p)
- target_remove_breakpoint (target, break_mem[1]);
+ arc_analyze_prologue (gdbarch, entrypoint, prologue_end, cache);
- /* Fix the pc. */
- stop_pc -= DECR_PC_AFTER_BREAK;
- write_pc (stop_pc);
+ if (arc_debug)
+ arc_print_frame_cache (gdbarch, "after prologue", cache, false);
+
+ CORE_ADDR unwound_fb = get_frame_register_unsigned (this_frame,
+ cache->frame_base_reg);
+ if (unwound_fb == 0)
+ return cache;
+ cache->prev_sp = unwound_fb + cache->frame_base_offset;
+
+ for (int i = 0; i <= ARC_LAST_CORE_REGNUM; i++)
+ {
+ if (cache->saved_regs[i].is_addr ())
+ cache->saved_regs[i].set_addr (cache->saved_regs[i].addr ()
+ + cache->prev_sp);
}
+
+ if (arc_debug)
+ arc_print_frame_cache (gdbarch, "after previous SP found", cache, true);
+
+ return cache;
}
-\f
-#ifdef GET_LONGJMP_TARGET
-/* Figure out where the longjmp will land. Slurp the args out of the stack.
- We expect the first arg to be a pointer to the jmp_buf structure from which
- we extract the pc (JB_PC) that we will land at. The pc is copied into PC.
- This routine returns true on success. */
-int
-get_longjmp_target (pc)
- CORE_ADDR *pc;
+/* Implement the "this_id" frame_unwind method. */
+
+static void
+arc_frame_this_id (struct frame_info *this_frame, void **this_cache,
+ struct frame_id *this_id)
{
- char buf[TARGET_PTR_BIT / TARGET_CHAR_BIT];
- CORE_ADDR sp, jb_addr;
+ arc_debug_printf ("called");
- sp = read_register (SP_REGNUM);
+ struct gdbarch *gdbarch = get_frame_arch (this_frame);
- if (target_read_memory (sp + SP_ARG0, /* Offset of first arg on stack */
- buf,
- TARGET_PTR_BIT / TARGET_CHAR_BIT))
- return 0;
+ if (*this_cache == NULL)
+ *this_cache = arc_make_frame_cache (this_frame);
+ struct arc_frame_cache *cache = (struct arc_frame_cache *) (*this_cache);
- jb_addr = extract_address (buf, TARGET_PTR_BIT / TARGET_CHAR_BIT);
+ CORE_ADDR stack_addr = cache->prev_sp;
- if (target_read_memory (jb_addr + JB_PC * JB_ELEMENT_SIZE, buf,
- TARGET_PTR_BIT / TARGET_CHAR_BIT))
- return 0;
+ /* There are 4 possible situation which decide how frame_id->code_addr is
+ evaluated:
- *pc = extract_address (buf, TARGET_PTR_BIT / TARGET_CHAR_BIT);
+ 1) Function is compiled with option -g. Then frame_id will be created
+ in dwarf_* function and not in this function. NB: even if target
+ binary is compiled with -g, some std functions like __start and _init
+ are not, so they still will follow one of the following choices.
- return 1;
+ 2) Function is compiled without -g and binary hasn't been stripped in
+ any way. In this case GDB still has enough information to evaluate
+ frame code_addr properly. This case is covered by call to
+ get_frame_func ().
+
+ 3) Binary has been striped with option -g (strip debug symbols). In
+ this case there is still enough symbols for get_frame_func () to work
+ properly, so this case is also covered by it.
+
+ 4) Binary has been striped with option -s (strip all symbols). In this
+ case GDB cannot get function start address properly, so we return current
+ PC value instead.
+ */
+ CORE_ADDR code_addr = get_frame_func (this_frame);
+ if (code_addr == 0)
+ code_addr = get_frame_register_unsigned (this_frame,
+ gdbarch_pc_regnum (gdbarch));
+
+ *this_id = frame_id_build (stack_addr, code_addr);
}
-#endif /* GET_LONGJMP_TARGET */
-\f
-/* Disassemble one instruction. */
-static int
-arc_print_insn (vma, info)
- bfd_vma vma;
- disassemble_info *info;
+/* Implement the "prev_register" frame_unwind method. */
+
+static struct value *
+arc_frame_prev_register (struct frame_info *this_frame,
+ void **this_cache, int regnum)
{
- static int current_mach;
- static int current_endian;
- static disassembler_ftype current_disasm;
+ if (*this_cache == NULL)
+ *this_cache = arc_make_frame_cache (this_frame);
+ struct arc_frame_cache *cache = (struct arc_frame_cache *) (*this_cache);
+
+ struct gdbarch *gdbarch = get_frame_arch (this_frame);
+
+ /* If we are asked to unwind the PC, then we need to return BLINK instead:
+ the saved value of PC points into this frame's function's prologue, not
+ the next frame's function's resume location. */
+ if (regnum == gdbarch_pc_regnum (gdbarch))
+ regnum = ARC_BLINK_REGNUM;
+
+ /* SP is a special case - we should return prev_sp, because
+ trad_frame_get_prev_register will return _current_ SP value.
+ Alternatively we could have stored cache->prev_sp in the cache->saved
+ regs, but here we follow the lead of AArch64, ARM and Xtensa and will
+ leave that logic in this function, instead of prologue analyzers. That I
+ think is a bit more clear as `saved_regs` should contain saved regs, not
+ computable.
+
+ Because value has been computed, "got_constant" should be used, so that
+ returned value will be a "not_lval" - immutable. */
+
+ if (regnum == gdbarch_sp_regnum (gdbarch))
+ return frame_unwind_got_constant (this_frame, regnum, cache->prev_sp);
+
+ return trad_frame_get_prev_register (this_frame, cache->saved_regs, regnum);
+}
+
+/* Implement the "init_reg" dwarf2_frame method. */
- if (current_disasm == NULL
- || arc_bfd_mach_type != current_mach
- || TARGET_BYTE_ORDER != current_endian)
+static void
+arc_dwarf2_frame_init_reg (struct gdbarch *gdbarch, int regnum,
+ struct dwarf2_frame_state_reg *reg,
+ struct frame_info *info)
+{
+ if (regnum == gdbarch_pc_regnum (gdbarch))
+ /* The return address column. */
+ reg->how = DWARF2_FRAME_REG_RA;
+ else if (regnum == gdbarch_sp_regnum (gdbarch))
+ /* The call frame address. */
+ reg->how = DWARF2_FRAME_REG_CFA;
+}
+
+/* Signal trampoline frame unwinder. Allows frame unwinding to happen
+ from within signal handlers. */
+
+static struct arc_frame_cache *
+arc_make_sigtramp_frame_cache (struct frame_info *this_frame)
+{
+ arc_debug_printf ("called");
+
+ gdbarch *arch = get_frame_arch (this_frame);
+ arc_gdbarch_tdep *tdep = (arc_gdbarch_tdep *) gdbarch_tdep (arch);
+
+ /* Allocate new frame cache instance and space for saved register info. */
+ struct arc_frame_cache *cache = FRAME_OBSTACK_ZALLOC (struct arc_frame_cache);
+ cache->saved_regs = trad_frame_alloc_saved_regs (this_frame);
+
+ /* Get the stack pointer and use it as the frame base. */
+ cache->prev_sp = arc_frame_base_address (this_frame, NULL);
+
+ /* If the ARC-private target-dependent info doesn't have a table of
+ offsets of saved register contents within an OS signal context
+ structure, then there is nothing to analyze. */
+ if (tdep->sc_reg_offset == NULL)
+ return cache;
+
+ /* Find the address of the sigcontext structure. */
+ CORE_ADDR addr = tdep->sigcontext_addr (this_frame);
+
+ /* For each register, if its contents have been saved within the
+ sigcontext structure, determine the address of those contents. */
+ gdb_assert (tdep->sc_num_regs <= (ARC_LAST_REGNUM + 1));
+ for (int i = 0; i < tdep->sc_num_regs; i++)
{
- current_mach = arc_bfd_mach_type;
- current_endian = TARGET_BYTE_ORDER;
- current_disasm = arc_get_disassembler (current_mach,
- current_endian == BIG_ENDIAN);
+ if (tdep->sc_reg_offset[i] != ARC_OFFSET_NO_REGISTER)
+ cache->saved_regs[i].set_addr (addr + tdep->sc_reg_offset[i]);
}
- return (*current_disasm) (vma, info);
+ return cache;
}
-\f
-/* Command to set cpu type. */
-void
-arc_set_cpu_type_command (args, from_tty)
- char *args;
- int from_tty;
+/* Implement the "this_id" frame_unwind method for signal trampoline
+ frames. */
+
+static void
+arc_sigtramp_frame_this_id (struct frame_info *this_frame,
+ void **this_cache, struct frame_id *this_id)
{
- int i;
+ arc_debug_printf ("called");
+
+ if (*this_cache == NULL)
+ *this_cache = arc_make_sigtramp_frame_cache (this_frame);
+
+ struct gdbarch *gdbarch = get_frame_arch (this_frame);
+ struct arc_frame_cache *cache = (struct arc_frame_cache *) *this_cache;
+ CORE_ADDR stack_addr = cache->prev_sp;
+ CORE_ADDR code_addr
+ = get_frame_register_unsigned (this_frame, gdbarch_pc_regnum (gdbarch));
+ *this_id = frame_id_build (stack_addr, code_addr);
+}
+
+/* Get a register from a signal handler frame. */
+
+static struct value *
+arc_sigtramp_frame_prev_register (struct frame_info *this_frame,
+ void **this_cache, int regnum)
+{
+ arc_debug_printf ("regnum = %d", regnum);
+
+ /* Make sure we've initialized the cache. */
+ if (*this_cache == NULL)
+ *this_cache = arc_make_sigtramp_frame_cache (this_frame);
+
+ struct arc_frame_cache *cache = (struct arc_frame_cache *) *this_cache;
+ return trad_frame_get_prev_register (this_frame, cache->saved_regs, regnum);
+}
+
+/* Frame sniffer for signal handler frame. Only recognize a frame if we
+ have a sigcontext_addr handler in the target dependency. */
+
+static int
+arc_sigtramp_frame_sniffer (const struct frame_unwind *self,
+ struct frame_info *this_frame,
+ void **this_cache)
+{
+ arc_debug_printf ("called");
+
+ gdbarch *arch = get_frame_arch (this_frame);
+ arc_gdbarch_tdep *tdep = (arc_gdbarch_tdep *) gdbarch_tdep (arch);
+
+ /* If we have a sigcontext_addr handler, then just return 1 (same as the
+ "default_frame_sniffer ()"). */
+ return (tdep->sigcontext_addr != NULL && tdep->is_sigtramp != NULL
+ && tdep->is_sigtramp (this_frame));
+}
- if (tmp_arc_cpu_type == NULL || *tmp_arc_cpu_type == '\0')
+/* Structure defining the ARC ordinary frame unwind functions. Since we are
+ the fallback unwinder, we use the default frame sniffer, which always
+ accepts the frame. */
+
+static const struct frame_unwind arc_frame_unwind = {
+ "arc prologue",
+ NORMAL_FRAME,
+ default_frame_unwind_stop_reason,
+ arc_frame_this_id,
+ arc_frame_prev_register,
+ NULL,
+ default_frame_sniffer,
+ NULL,
+ NULL
+};
+
+/* Structure defining the ARC signal frame unwind functions. Custom
+ sniffer is used, because this frame must be accepted only in the right
+ context. */
+
+static const struct frame_unwind arc_sigtramp_frame_unwind = {
+ "arc sigtramp",
+ SIGTRAMP_FRAME,
+ default_frame_unwind_stop_reason,
+ arc_sigtramp_frame_this_id,
+ arc_sigtramp_frame_prev_register,
+ NULL,
+ arc_sigtramp_frame_sniffer,
+ NULL,
+ NULL
+};
+
+
+static const struct frame_base arc_normal_base = {
+ &arc_frame_unwind,
+ arc_frame_base_address,
+ arc_frame_base_address,
+ arc_frame_base_address
+};
+
+/* Add all the expected register sets into GDBARCH. */
+
+static void
+arc_add_reggroups (struct gdbarch *gdbarch)
+{
+ reggroup_add (gdbarch, general_reggroup);
+ reggroup_add (gdbarch, float_reggroup);
+ reggroup_add (gdbarch, system_reggroup);
+ reggroup_add (gdbarch, vector_reggroup);
+ reggroup_add (gdbarch, all_reggroup);
+ reggroup_add (gdbarch, save_reggroup);
+ reggroup_add (gdbarch, restore_reggroup);
+}
+
+static enum arc_isa
+mach_type_to_arc_isa (const unsigned long mach)
+{
+ switch (mach)
{
- printf_unfiltered ("The known ARC cpu types are as follows:\n");
- for (i = 0; arc_cpu_type_table[i].name != NULL; ++i)
- printf_unfiltered ("%s\n", arc_cpu_type_table[i].name);
+ case bfd_mach_arc_arc600:
+ case bfd_mach_arc_arc601:
+ case bfd_mach_arc_arc700:
+ return ARC_ISA_ARCV1;
+ case bfd_mach_arc_arcv2:
+ return ARC_ISA_ARCV2;
+ default:
+ internal_error (__FILE__, __LINE__,
+ _("unknown machine id %lu"), mach);
+ }
+}
- /* Restore the value. */
- tmp_arc_cpu_type = strsave (arc_cpu_type);
+/* See arc-tdep.h. */
- return;
+arc_arch_features
+arc_arch_features_create (const bfd *abfd, const unsigned long mach)
+{
+ /* Use 4 as a fallback value. */
+ int reg_size = 4;
+
+ /* Try to guess the features parameters by looking at the binary to be
+ executed. If the user is providing a binary that does not match the
+ target, then tough luck. This is the last effort to makes sense of
+ what's going on. */
+ if (abfd != nullptr && bfd_get_flavour (abfd) == bfd_target_elf_flavour)
+ {
+ unsigned char eclass = elf_elfheader (abfd)->e_ident[EI_CLASS];
+
+ if (eclass == ELFCLASS32)
+ reg_size = 4;
+ else if (eclass == ELFCLASS64)
+ reg_size = 8;
+ else
+ internal_error (__FILE__, __LINE__,
+ _("unknown ELF header class %d"), eclass);
}
- if (!arc_set_cpu_type (tmp_arc_cpu_type))
+ /* MACH from a bfd_arch_info struct is used here. It should be a safe
+ bet, as it looks like the struct is always initialized even when we
+ don't pass any elf file to GDB at all (it uses default arch in that
+ case). */
+ arc_isa isa = mach_type_to_arc_isa (mach);
+
+ return arc_arch_features (reg_size, isa);
+}
+
+/* Look for obsolete core feature names in TDESC. */
+
+static const struct tdesc_feature *
+find_obsolete_core_names (const struct target_desc *tdesc)
+{
+ const struct tdesc_feature *feat = nullptr;
+
+ feat = tdesc_find_feature (tdesc, ARC_CORE_V1_OBSOLETE_FEATURE_NAME);
+
+ if (feat == nullptr)
+ feat = tdesc_find_feature (tdesc, ARC_CORE_V2_OBSOLETE_FEATURE_NAME);
+
+ if (feat == nullptr)
+ feat = tdesc_find_feature
+ (tdesc, ARC_CORE_V2_REDUCED_OBSOLETE_FEATURE_NAME);
+
+ return feat;
+}
+
+/* Look for obsolete aux feature names in TDESC. */
+
+static const struct tdesc_feature *
+find_obsolete_aux_names (const struct target_desc *tdesc)
+{
+ return tdesc_find_feature (tdesc, ARC_AUX_OBSOLETE_FEATURE_NAME);
+}
+
+/* Based on the MACH value, determines which core register features set
+ must be used. */
+
+static arc_register_feature *
+determine_core_reg_feature_set (const unsigned long mach)
+{
+ switch (mach_type_to_arc_isa (mach))
{
- error ("Unknown cpu type `%s'.", tmp_arc_cpu_type);
- /* Restore its value. */
- tmp_arc_cpu_type = strsave (arc_cpu_type);
+ case ARC_ISA_ARCV1:
+ return &arc_v1_core_reg_feature;
+ case ARC_ISA_ARCV2:
+ return &arc_v2_core_reg_feature;
+ default:
+ gdb_assert_not_reached
+ ("Unknown machine type to determine the core feature set.");
}
}
+/* At the moment, there is only 1 auxiliary register features set.
+ This is a place holder for future extendability. */
+
+static const arc_register_feature *
+determine_aux_reg_feature_set ()
+{
+ return &arc_common_aux_reg_feature;
+}
+
+/* Update accumulator register names (ACCH/ACCL) for r58 and r59 in the
+ register sets. The endianness determines the assignment:
+
+ ,------.------.
+ | acch | accl |
+ ,----|------+------|
+ | LE | r59 | r58 |
+ | BE | r58 | r59 |
+ `----^------^------' */
+
static void
-arc_show_cpu_type_command (args, from_tty)
- char *args;
- int from_tty;
+arc_update_acc_reg_names (const int byte_order)
{
+ const char *r58_alias
+ = byte_order == BFD_ENDIAN_LITTLE ? "accl" : "acch";
+ const char *r59_alias
+ = byte_order == BFD_ENDIAN_LITTLE ? "acch" : "accl";
+
+ /* Subscript 1 must be OK because those registers have 2 names. */
+ arc_v1_core_reg_feature.registers[ARC_R58_REGNUM].names[1] = r58_alias;
+ arc_v1_core_reg_feature.registers[ARC_R59_REGNUM].names[1] = r59_alias;
+ arc_v2_core_reg_feature.registers[ARC_R58_REGNUM].names[1] = r58_alias;
+ arc_v2_core_reg_feature.registers[ARC_R59_REGNUM].names[1] = r59_alias;
}
-/* Modify the actual cpu type.
- Result is a boolean indicating success. */
+/* Go through all the registers in REG_SET and check if they exist
+ in FEATURE. The TDESC_DATA is updated with the register number
+ in REG_SET if it is found in the feature. If a required register
+ is not found, this function returns false. */
-int
-arc_set_cpu_type (str)
- char *str;
+static bool
+arc_check_tdesc_feature (struct tdesc_arch_data *tdesc_data,
+ const struct tdesc_feature *feature,
+ const struct arc_register_feature *reg_set)
{
- int i, j;
+ for (const auto ® : reg_set->registers)
+ {
+ bool found = false;
- if (str == NULL)
- return 0;
+ for (const char *name : reg.names)
+ {
+ found
+ = tdesc_numbered_register (feature, tdesc_data, reg.regnum, name);
- for (i = 0; arc_cpu_type_table[i].name != NULL; ++i)
+ if (found)
+ break;
+ }
+
+ if (!found && reg.required_p)
+ {
+ std::ostringstream reg_names;
+ for (std::size_t i = 0; i < reg.names.size(); ++i)
+ {
+ if (i == 0)
+ reg_names << "'" << reg.names[0] << "'";
+ else
+ reg_names << " or '" << reg.names[0] << "'";
+ }
+ arc_print (_("Error: Cannot find required register(s) %s "
+ "in feature '%s'.\n"), reg_names.str ().c_str (),
+ feature->name.c_str ());
+ return false;
+ }
+ }
+
+ return true;
+}
+
+/* Check for the existance of "lp_start" and "lp_end" in target description.
+ If both are present, assume there is hardware loop support in the target.
+ This can be improved by looking into "lpc_size" field of "isa_config"
+ auxiliary register. */
+
+static bool
+arc_check_for_hw_loops (const struct target_desc *tdesc,
+ struct tdesc_arch_data *data)
+{
+ const auto feature_aux = tdesc_find_feature (tdesc, ARC_AUX_FEATURE_NAME);
+ const auto aux_regset = determine_aux_reg_feature_set ();
+
+ if (feature_aux == nullptr)
+ return false;
+
+ bool hw_loop_p = false;
+ const auto lp_start_name =
+ aux_regset->registers[ARC_LP_START_REGNUM - ARC_FIRST_AUX_REGNUM].names[0];
+ const auto lp_end_name =
+ aux_regset->registers[ARC_LP_END_REGNUM - ARC_FIRST_AUX_REGNUM].names[0];
+
+ hw_loop_p = tdesc_numbered_register (feature_aux, data,
+ ARC_LP_START_REGNUM, lp_start_name);
+ hw_loop_p &= tdesc_numbered_register (feature_aux, data,
+ ARC_LP_END_REGNUM, lp_end_name);
+
+ return hw_loop_p;
+}
+
+/* Initialize target description for the ARC.
+
+ Returns true if input TDESC was valid and in this case it will assign TDESC
+ and TDESC_DATA output parameters. */
+
+static bool
+arc_tdesc_init (struct gdbarch_info info, const struct target_desc **tdesc,
+ tdesc_arch_data_up *tdesc_data)
+{
+ const struct target_desc *tdesc_loc = info.target_desc;
+ arc_debug_printf ("Target description initialization.");
+
+ /* If target doesn't provide a description, use the default ones. */
+ if (!tdesc_has_registers (tdesc_loc))
+ {
+ arc_arch_features features
+ = arc_arch_features_create (info.abfd,
+ info.bfd_arch_info->mach);
+ tdesc_loc = arc_lookup_target_description (features);
+ }
+ gdb_assert (tdesc_loc != nullptr);
+
+ arc_debug_printf ("Have got a target description");
+
+ const struct tdesc_feature *feature_core
+ = tdesc_find_feature (tdesc_loc, ARC_CORE_FEATURE_NAME);
+ const struct tdesc_feature *feature_aux
+ = tdesc_find_feature (tdesc_loc, ARC_AUX_FEATURE_NAME);
+
+ /* Maybe there still is a chance to salvage the input. */
+ if (feature_core == nullptr)
+ feature_core = find_obsolete_core_names (tdesc_loc);
+ if (feature_aux == nullptr)
+ feature_aux = find_obsolete_aux_names (tdesc_loc);
+
+ if (feature_core == nullptr)
+ {
+ arc_print (_("Error: Cannot find required feature '%s' in supplied "
+ "target description.\n"), ARC_CORE_FEATURE_NAME);
+ return false;
+ }
+
+ if (feature_aux == nullptr)
+ {
+ arc_print (_("Error: Cannot find required feature '%s' in supplied "
+ "target description.\n"), ARC_AUX_FEATURE_NAME);
+ return false;
+ }
+
+ const arc_register_feature *arc_core_reg_feature
+ = determine_core_reg_feature_set (info.bfd_arch_info->mach);
+ const arc_register_feature *arc_aux_reg_feature
+ = determine_aux_reg_feature_set ();
+
+ tdesc_arch_data_up tdesc_data_loc = tdesc_data_alloc ();
+
+ arc_update_acc_reg_names (info.byte_order);
+
+ bool valid_p = arc_check_tdesc_feature (tdesc_data_loc.get (),
+ feature_core,
+ arc_core_reg_feature);
+
+ valid_p &= arc_check_tdesc_feature (tdesc_data_loc.get (),
+ feature_aux,
+ arc_aux_reg_feature);
+
+ if (!valid_p)
+ {
+ arc_debug_printf ("Target description is not valid");
+ return false;
+ }
+
+ *tdesc = tdesc_loc;
+ *tdesc_data = std::move (tdesc_data_loc);
+
+ return true;
+}
+
+/* Implement the type_align gdbarch function. */
+
+static ULONGEST
+arc_type_align (struct gdbarch *gdbarch, struct type *type)
+{
+ switch (type->code ())
+ {
+ case TYPE_CODE_PTR:
+ case TYPE_CODE_FUNC:
+ case TYPE_CODE_FLAGS:
+ case TYPE_CODE_INT:
+ case TYPE_CODE_RANGE:
+ case TYPE_CODE_FLT:
+ case TYPE_CODE_ENUM:
+ case TYPE_CODE_REF:
+ case TYPE_CODE_RVALUE_REF:
+ case TYPE_CODE_CHAR:
+ case TYPE_CODE_BOOL:
+ case TYPE_CODE_DECFLOAT:
+ case TYPE_CODE_METHODPTR:
+ case TYPE_CODE_MEMBERPTR:
+ type = check_typedef (type);
+ return std::min<ULONGEST> (4, TYPE_LENGTH (type));
+ default:
+ return 0;
+ }
+}
+
+/* Implement the "init" gdbarch method. */
+
+static struct gdbarch *
+arc_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches)
+{
+ const struct target_desc *tdesc;
+ tdesc_arch_data_up tdesc_data;
+
+ arc_debug_printf ("Architecture initialization.");
+
+ if (!arc_tdesc_init (info, &tdesc, &tdesc_data))
+ return nullptr;
+
+ /* Allocate the ARC-private target-dependent information structure, and the
+ GDB target-independent information structure. */
+ std::unique_ptr<arc_gdbarch_tdep> tdep_holder (new arc_gdbarch_tdep);
+ arc_gdbarch_tdep *tdep = tdep_holder.get ();
+ tdep->jb_pc = -1; /* No longjmp support by default. */
+ tdep->has_hw_loops = arc_check_for_hw_loops (tdesc, tdesc_data.get ());
+ struct gdbarch *gdbarch = gdbarch_alloc (&info, tdep_holder.release ());
+
+ /* Data types. */
+ set_gdbarch_short_bit (gdbarch, 16);
+ set_gdbarch_int_bit (gdbarch, 32);
+ set_gdbarch_long_bit (gdbarch, 32);
+ set_gdbarch_long_long_bit (gdbarch, 64);
+ set_gdbarch_type_align (gdbarch, arc_type_align);
+ set_gdbarch_float_bit (gdbarch, 32);
+ set_gdbarch_float_format (gdbarch, floatformats_ieee_single);
+ set_gdbarch_double_bit (gdbarch, 64);
+ set_gdbarch_double_format (gdbarch, floatformats_ieee_double);
+ set_gdbarch_ptr_bit (gdbarch, 32);
+ set_gdbarch_addr_bit (gdbarch, 32);
+ set_gdbarch_char_signed (gdbarch, 0);
+
+ set_gdbarch_write_pc (gdbarch, arc_write_pc);
+
+ set_gdbarch_virtual_frame_pointer (gdbarch, arc_virtual_frame_pointer);
+
+ /* tdesc_use_registers expects gdbarch_num_regs to return number of registers
+ parsed by gdbarch_init, and then it will add all of the remaining
+ registers and will increase number of registers. */
+ set_gdbarch_num_regs (gdbarch, ARC_LAST_REGNUM + 1);
+ set_gdbarch_num_pseudo_regs (gdbarch, 0);
+ set_gdbarch_sp_regnum (gdbarch, ARC_SP_REGNUM);
+ set_gdbarch_pc_regnum (gdbarch, ARC_PC_REGNUM);
+ set_gdbarch_ps_regnum (gdbarch, ARC_STATUS32_REGNUM);
+ set_gdbarch_fp0_regnum (gdbarch, -1); /* No FPU registers. */
+
+ set_gdbarch_push_dummy_call (gdbarch, arc_push_dummy_call);
+ set_gdbarch_push_dummy_code (gdbarch, arc_push_dummy_code);
+
+ set_gdbarch_cannot_fetch_register (gdbarch, arc_cannot_fetch_register);
+ set_gdbarch_cannot_store_register (gdbarch, arc_cannot_store_register);
+
+ set_gdbarch_believe_pcc_promotion (gdbarch, 1);
+
+ set_gdbarch_return_value (gdbarch, arc_return_value);
+
+ set_gdbarch_skip_prologue (gdbarch, arc_skip_prologue);
+ set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
+
+ set_gdbarch_breakpoint_kind_from_pc (gdbarch, arc_breakpoint_kind_from_pc);
+ set_gdbarch_sw_breakpoint_from_kind (gdbarch, arc_sw_breakpoint_from_kind);
+
+ /* On ARC 600 BRK_S instruction advances PC, unlike other ARC cores. */
+ if (!arc_mach_is_arc600 (gdbarch))
+ set_gdbarch_decr_pc_after_break (gdbarch, 0);
+ else
+ set_gdbarch_decr_pc_after_break (gdbarch, 2);
+
+ set_gdbarch_frame_align (gdbarch, arc_frame_align);
+
+ set_gdbarch_print_insn (gdbarch, arc_delayed_print_insn);
+
+ set_gdbarch_cannot_step_breakpoint (gdbarch, 1);
+
+ /* "nonsteppable" watchpoint means that watchpoint triggers before
+ instruction is committed, therefore it is required to remove watchpoint
+ to step though instruction that triggers it. ARC watchpoints trigger
+ only after instruction is committed, thus there is no need to remove
+ them. In fact on ARC watchpoint for memory writes may trigger with more
+ significant delay, like one or two instructions, depending on type of
+ memory where write is performed (CCM or external) and next instruction
+ after the memory write. */
+ set_gdbarch_have_nonsteppable_watchpoint (gdbarch, 0);
+
+ /* This doesn't include possible long-immediate value. */
+ set_gdbarch_max_insn_length (gdbarch, 4);
+
+ /* Add default register groups. */
+ arc_add_reggroups (gdbarch);
+
+ /* Frame unwinders and sniffers. */
+ dwarf2_frame_set_init_reg (gdbarch, arc_dwarf2_frame_init_reg);
+ dwarf2_append_unwinders (gdbarch);
+ frame_unwind_append_unwinder (gdbarch, &arc_sigtramp_frame_unwind);
+ frame_unwind_append_unwinder (gdbarch, &arc_frame_unwind);
+ frame_base_set_default (gdbarch, &arc_normal_base);
+
+ /* Setup stuff specific to a particular environment (baremetal or Linux).
+ It can override functions set earlier. */
+ gdbarch_init_osabi (info, gdbarch);
+
+ if (tdep->jb_pc >= 0)
+ set_gdbarch_get_longjmp_target (gdbarch, arc_get_longjmp_target);
+
+ /* Disassembler options. Enforce CPU if it was specified in XML target
+ description, otherwise use default method of determining CPU (ELF private
+ header). */
+ if (info.target_desc != NULL)
{
- if (strcasecmp (str, arc_cpu_type_table[i].name) == 0)
+ const struct bfd_arch_info *tdesc_arch
+ = tdesc_architecture (info.target_desc);
+ if (tdesc_arch != NULL)
{
- arc_cpu_type = str;
- arc_bfd_mach_type = arc_cpu_type_table[i].value;
- return 1;
+ xfree (arc_disassembler_options);
+ /* FIXME: It is not really good to change disassembler options
+ behind the scene, because that might override options
+ specified by the user. However as of now ARC doesn't support
+ `set disassembler-options' hence this code is the only place
+ where options are changed. It also changes options for all
+ existing gdbarches, which also can be problematic, if
+ arc_gdbarch_init will start reusing existing gdbarch
+ instances. */
+ /* Target description specifies a BFD architecture, which is
+ different from ARC cpu, as accepted by disassembler (and most
+ other ARC tools), because cpu values are much more fine grained -
+ there can be multiple cpu values per single BFD architecture. As
+ a result this code should translate architecture to some cpu
+ value. Since there is no info on exact cpu configuration, it is
+ best to use the most feature-rich CPU, so that disassembler will
+ recognize all instructions available to the specified
+ architecture. */
+ switch (tdesc_arch->mach)
+ {
+ case bfd_mach_arc_arc601:
+ arc_disassembler_options = xstrdup ("cpu=arc601");
+ break;
+ case bfd_mach_arc_arc600:
+ arc_disassembler_options = xstrdup ("cpu=arc600");
+ break;
+ case bfd_mach_arc_arc700:
+ arc_disassembler_options = xstrdup ("cpu=arc700");
+ break;
+ case bfd_mach_arc_arcv2:
+ /* Machine arcv2 has three arches: ARCv2, EM and HS; where ARCv2
+ is treated as EM. */
+ if (arc_arch_is_hs (tdesc_arch))
+ arc_disassembler_options = xstrdup ("cpu=hs38_linux");
+ else
+ arc_disassembler_options = xstrdup ("cpu=em4_fpuda");
+ break;
+ default:
+ arc_disassembler_options = NULL;
+ break;
+ }
}
}
- return 0;
+ set_gdbarch_disassembler_options (gdbarch, &arc_disassembler_options);
+ set_gdbarch_valid_disassembler_options (gdbarch,
+ disassembler_options_arc ());
+
+ tdesc_use_registers (gdbarch, tdesc, std::move (tdesc_data));
+
+ return gdbarch;
+}
+
+/* Implement the "dump_tdep" gdbarch method. */
+
+static void
+arc_dump_tdep (struct gdbarch *gdbarch, struct ui_file *file)
+{
+ arc_gdbarch_tdep *tdep = (arc_gdbarch_tdep *) gdbarch_tdep (gdbarch);
+
+ fprintf_filtered (file, "arc_dump_tdep: jb_pc = %i\n", tdep->jb_pc);
+
+ fprintf_filtered (file, "arc_dump_tdep: is_sigtramp = <%s>\n",
+ host_address_to_string (tdep->is_sigtramp));
+ fprintf_filtered (file, "arc_dump_tdep: sigcontext_addr = <%s>\n",
+ host_address_to_string (tdep->sigcontext_addr));
+ fprintf_filtered (file, "arc_dump_tdep: sc_reg_offset = <%s>\n",
+ host_address_to_string (tdep->sc_reg_offset));
+ fprintf_filtered (file, "arc_dump_tdep: sc_num_regs = %d\n",
+ tdep->sc_num_regs);
}
-\f
+
+/* This command accepts single argument - address of instruction to
+ disassemble. */
+
+static void
+dump_arc_instruction_command (const char *args, int from_tty)
+{
+ struct value *val;
+ if (args != NULL && strlen (args) > 0)
+ val = evaluate_expression (parse_expression (args).get ());
+ else
+ val = access_value_history (0);
+ record_latest_value (val);
+
+ CORE_ADDR address = value_as_address (val);
+ struct arc_instruction insn;
+ struct disassemble_info di = arc_disassemble_info (target_gdbarch ());
+ arc_insn_decode (address, &di, arc_delayed_print_insn, &insn);
+ arc_insn_dump (insn);
+}
+
+void _initialize_arc_tdep ();
void
_initialize_arc_tdep ()
{
- struct cmd_list_element *c;
-
- c = add_set_cmd ("cpu", class_support, var_string_noescape,
- (char *) &tmp_arc_cpu_type,
- "Set the type of ARC cpu in use.\n\
-This command has two purposes. In a multi-cpu system it lets one\n\
-change the cpu being debugged. It also gives one access to\n\
-cpu-type-specific registers and recognize cpu-type-specific instructions.\
-",
- &setlist);
- c->function.cfunc = arc_set_cpu_type_command;
- c = add_show_from_set (c, &showlist);
- c->function.cfunc = arc_show_cpu_type_command;
-
- /* We have to use strsave here because the `set' command frees it before
- setting a new value. */
- tmp_arc_cpu_type = strsave (DEFAULT_ARC_CPU_TYPE);
- arc_set_cpu_type (tmp_arc_cpu_type);
-
- c = add_set_cmd ("displaypipeline", class_support, var_zinteger,
- (char *) &display_pipeline_p,
- "Set pipeline display (simulator only).\n\
-When enabled, the state of the pipeline after each cycle is displayed.",
- &setlist);
- c = add_show_from_set (c, &showlist);
-
- c = add_set_cmd ("debugpipeline", class_support, var_zinteger,
- (char *) &debug_pipeline_p,
- "Set pipeline debug display (simulator only).\n\
-When enabled, debugging information about the pipeline is displayed.",
- &setlist);
- c = add_show_from_set (c, &showlist);
-
- c = add_set_cmd ("cputimer", class_support, var_zinteger,
- (char *) &cpu_timer,
- "Set maximum cycle count (simulator only).\n\
-Control will return to gdb if the timer expires.\n\
-A negative value disables the timer.",
- &setlist);
- c = add_show_from_set (c, &showlist);
-
- tm_print_insn = arc_print_insn;
+ gdbarch_register (bfd_arch_arc, arc_gdbarch_init, arc_dump_tdep);
+
+ /* Register ARC-specific commands with gdb. */
+
+ /* Add root prefix command for "maintenance print arc" commands. */
+ add_show_prefix_cmd ("arc", class_maintenance,
+ _("ARC-specific maintenance commands for printing GDB "
+ "internal state."),
+ &maintenance_print_arc_list,
+ 0, &maintenanceprintlist);
+
+ add_cmd ("arc-instruction", class_maintenance,
+ dump_arc_instruction_command,
+ _("Dump arc_instruction structure for specified address."),
+ &maintenance_print_arc_list);
+
+ /* Debug internals for ARC GDB. */
+ add_setshow_boolean_cmd ("arc", class_maintenance,
+ &arc_debug,
+ _("Set ARC specific debugging."),
+ _("Show ARC specific debugging."),
+ _("When set, ARC specific debugging is enabled."),
+ NULL, NULL, &setdebuglist, &showdebuglist);
}