#include "gdb_assert.h"
#include "vec.h"
+#include "features/arm-with-m.c"
+
static int arm_debug;
/* Macros for setting and testing a bit in a minimal symbol that marks
struct trad_frame_saved_reg *saved_regs;
};
+static CORE_ADDR arm_analyze_prologue (struct gdbarch *gdbarch,
+ CORE_ADDR prologue_start,
+ CORE_ADDR prologue_end,
+ struct arm_prologue_cache *cache);
+
/* Architecture version for displaced stepping. This effects the behaviour of
certain instructions, and really should not be hard-wired. */
int arm_apcs_32 = 1;
+/* Return the bit mask in ARM_PS_REGNUM that indicates Thumb mode. */
+
+static int
+arm_psr_thumb_bit (struct gdbarch *gdbarch)
+{
+ if (gdbarch_tdep (gdbarch)->is_m)
+ return XPSR_T;
+ else
+ return CPSR_T;
+}
+
/* Determine if FRAME is executing in Thumb mode. */
static int
arm_frame_is_thumb (struct frame_info *frame)
{
CORE_ADDR cpsr;
+ ULONGEST t_bit = arm_psr_thumb_bit (get_frame_arch (frame));
/* Every ARM frame unwinder can unwind the T bit of the CPSR, either
directly (from a signal frame or dummy frame) or by interpreting
trust the unwinders. */
cpsr = get_frame_register_unsigned (frame, ARM_PS_REGNUM);
- return (cpsr & CPSR_T) != 0;
+ return (cpsr & t_bit) != 0;
}
/* Callback for VEC_lower_bound. */
any executing frame; otherwise, prefer arm_frame_is_thumb. */
static int
-arm_pc_is_thumb (CORE_ADDR memaddr)
+arm_pc_is_thumb (struct gdbarch *gdbarch, CORE_ADDR memaddr)
{
struct obj_section *sec;
struct minimal_symbol *sym;
if (strcmp (arm_force_mode_string, "thumb") == 0)
return 1;
+ /* ARM v6-M and v7-M are always in Thumb mode. */
+ if (gdbarch_tdep (gdbarch)->is_m)
+ return 1;
+
/* If there are mapping symbols, consult them. */
type = arm_find_mapping_symbol (memaddr, NULL);
if (type)
return val & ~1;
}
+/* Return 1 if PC is the start of a compiler helper function which
+ can be safely ignored during prologue skipping. */
+static int
+skip_prologue_function (CORE_ADDR pc)
+{
+ struct minimal_symbol *msym;
+ const char *name;
+
+ msym = lookup_minimal_symbol_by_pc (pc);
+ if (msym == NULL || SYMBOL_VALUE_ADDRESS (msym) != pc)
+ return 0;
+
+ name = SYMBOL_LINKAGE_NAME (msym);
+ if (name == NULL)
+ return 0;
+
+ /* The GNU linker's Thumb call stub to foo is named
+ __foo_from_thumb. */
+ if (strstr (name, "_from_thumb") != NULL)
+ name += 2;
+
+ /* On soft-float targets, __truncdfsf2 is called to convert promoted
+ arguments to their argument types in non-prototyped
+ functions. */
+ if (strncmp (name, "__truncdfsf2", strlen ("__truncdfsf2")) == 0)
+ return 1;
+ if (strncmp (name, "__aeabi_d2f", strlen ("__aeabi_d2f")) == 0)
+ return 1;
+
+ return 0;
+}
+
+/* Support routines for instruction parsing. */
+#define submask(x) ((1L << ((x) + 1)) - 1)
+#define bit(obj,st) (((obj) >> (st)) & 1)
+#define bits(obj,st,fn) (((obj) >> (st)) & submask ((fn) - (st)))
+#define sbits(obj,st,fn) \
+ ((long) (bits(obj,st,fn) | ((long) bit(obj,fn) * ~ submask (fn - st))))
+#define BranchDest(addr,instr) \
+ ((CORE_ADDR) (((long) (addr)) + 8 + (sbits (instr, 0, 23) << 2)))
+
/* Analyze a Thumb prologue, looking for a recognizable stack frame
and frame pointer. Scan until we encounter a store that could
- clobber the stack frame unexpectedly, or an unknown instruction. */
+ clobber the stack frame unexpectedly, or an unknown instruction.
+ Return the last address which is definitely safe to skip for an
+ initial breakpoint. */
static CORE_ADDR
thumb_analyze_prologue (struct gdbarch *gdbarch,
CORE_ADDR start, CORE_ADDR limit,
struct arm_prologue_cache *cache)
{
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
enum bfd_endian byte_order_for_code = gdbarch_byte_order_for_code (gdbarch);
int i;
pv_t regs[16];
regs[ARM_SP_REGNUM] = pv_add_constant (regs[ARM_SP_REGNUM],
offset);
}
- else if ((insn & 0xff00) == 0xaf00) /* add r7, sp, #imm */
- regs[THUMB_FP_REGNUM] = pv_add_constant (regs[ARM_SP_REGNUM],
- (insn & 0xff) << 2);
+ else if ((insn & 0xf800) == 0xa800) /* add Rd, sp, #imm */
+ regs[bits (insn, 8, 10)] = pv_add_constant (regs[ARM_SP_REGNUM],
+ (insn & 0xff) << 2);
+ else if ((insn & 0xfe00) == 0x1c00 /* add Rd, Rn, #imm */
+ && pv_is_register (regs[bits (insn, 3, 5)], ARM_SP_REGNUM))
+ regs[bits (insn, 0, 2)] = pv_add_constant (regs[bits (insn, 3, 5)],
+ bits (insn, 6, 8));
+ else if ((insn & 0xf800) == 0x3000 /* add Rd, #imm */
+ && pv_is_register (regs[bits (insn, 8, 10)], ARM_SP_REGNUM))
+ regs[bits (insn, 8, 10)] = pv_add_constant (regs[bits (insn, 8, 10)],
+ bits (insn, 0, 7));
+ else if ((insn & 0xfe00) == 0x1800 /* add Rd, Rn, Rm */
+ && pv_is_register (regs[bits (insn, 6, 8)], ARM_SP_REGNUM)
+ && pv_is_constant (regs[bits (insn, 3, 5)]))
+ regs[bits (insn, 0, 2)] = pv_add (regs[bits (insn, 3, 5)],
+ regs[bits (insn, 6, 8)]);
+ else if ((insn & 0xff00) == 0x4400 /* add Rd, Rm */
+ && pv_is_constant (regs[bits (insn, 3, 6)]))
+ {
+ int rd = (bit (insn, 7) << 3) + bits (insn, 0, 2);
+ int rm = bits (insn, 3, 6);
+ regs[rd] = pv_add (regs[rd], regs[rm]);
+ }
else if ((insn & 0xff00) == 0x4600) /* mov hi, lo or mov lo, hi */
{
int dst_reg = (insn & 0x7) + ((insn & 0x80) >> 4);
pv_area_store (stack, addr, 4, regs[regno]);
}
+ else if ((insn & 0xf800) == 0x6000) /* str rd, [rn, #off] */
+ {
+ int rd = bits (insn, 0, 2);
+ int rn = bits (insn, 3, 5);
+ pv_t addr;
+
+ offset = bits (insn, 6, 10) << 2;
+ addr = pv_add_constant (regs[rn], offset);
+
+ if (pv_area_store_would_trash (stack, addr))
+ break;
+
+ pv_area_store (stack, addr, 4, regs[rd]);
+ }
+ else if (((insn & 0xf800) == 0x7000 /* strb Rd, [Rn, #off] */
+ || (insn & 0xf800) == 0x8000) /* strh Rd, [Rn, #off] */
+ && pv_is_register (regs[bits (insn, 3, 5)], ARM_SP_REGNUM))
+ /* Ignore stores of argument registers to the stack. */
+ ;
+ else if ((insn & 0xf800) == 0xc800 /* ldmia Rn!, { registers } */
+ && pv_is_register (regs[bits (insn, 8, 10)], ARM_SP_REGNUM))
+ /* Ignore block loads from the stack, potentially copying
+ parameters from memory. */
+ ;
+ else if ((insn & 0xf800) == 0x9800 /* ldr Rd, [Rn, #immed] */
+ || ((insn & 0xf800) == 0x6800 /* ldr Rd, [sp, #immed] */
+ && pv_is_register (regs[bits (insn, 3, 5)], ARM_SP_REGNUM)))
+ /* Similarly ignore single loads from the stack. */
+ ;
+ else if ((insn & 0xffc0) == 0x0000 /* lsls Rd, Rm, #0 */
+ || (insn & 0xffc0) == 0x1c00) /* add Rd, Rn, #0 */
+ /* Skip register copies, i.e. saves to another register
+ instead of the stack. */
+ ;
+ else if ((insn & 0xf800) == 0x2000) /* movs Rd, #imm */
+ /* Recognize constant loads; even with small stacks these are necessary
+ on Thumb. */
+ regs[bits (insn, 8, 10)] = pv_constant (bits (insn, 0, 7));
+ else if ((insn & 0xf800) == 0x4800) /* ldr Rd, [pc, #imm] */
+ {
+ /* Constant pool loads, for the same reason. */
+ unsigned int constant;
+ CORE_ADDR loc;
+
+ loc = start + 4 + bits (insn, 0, 7) * 4;
+ constant = read_memory_unsigned_integer (loc, 4, byte_order);
+ regs[bits (insn, 8, 10)] = pv_constant (constant);
+ }
+ else if ((insn & 0xe000) == 0xe000 && cache == NULL)
+ {
+ /* Only recognize 32-bit instructions for prologue skipping. */
+ unsigned short inst2;
+
+ inst2 = read_memory_unsigned_integer (start + 2, 2,
+ byte_order_for_code);
+
+ if ((insn & 0xf800) == 0xf000 && (inst2 & 0xe800) == 0xe800)
+ {
+ /* BL, BLX. Allow some special function calls when
+ skipping the prologue; GCC generates these before
+ storing arguments to the stack. */
+ CORE_ADDR nextpc;
+ int j1, j2, imm1, imm2;
+
+ imm1 = sbits (insn, 0, 10);
+ imm2 = bits (inst2, 0, 10);
+ j1 = bit (inst2, 13);
+ j2 = bit (inst2, 11);
+
+ offset = ((imm1 << 12) + (imm2 << 1));
+ offset ^= ((!j2) << 22) | ((!j1) << 23);
+
+ nextpc = start + 4 + offset;
+ /* For BLX make sure to clear the low bits. */
+ if (bit (inst2, 12) == 0)
+ nextpc = nextpc & 0xfffffffc;
+
+ if (!skip_prologue_function (nextpc))
+ break;
+ }
+ else if ((insn & 0xfe50) == 0xe800 /* stm{db,ia} Rn[!], { registers } */
+ && pv_is_register (regs[bits (insn, 0, 3)], ARM_SP_REGNUM))
+ ;
+ else if ((insn & 0xfe50) == 0xe840 /* strd Rt, Rt2, [Rn, #imm] */
+ && pv_is_register (regs[bits (insn, 0, 3)], ARM_SP_REGNUM))
+ ;
+ else if ((insn & 0xffd0) == 0xe890 /* ldmia Rn[!], { registers } */
+ && (inst2 & 0x8000) == 0x0000
+ && pv_is_register (regs[bits (insn, 0, 3)], ARM_SP_REGNUM))
+ ;
+ else if ((insn & 0xfbf0) == 0xf100 /* add.w Rd, Rn, #imm */
+ && (inst2 & 0x8000) == 0x0000)
+ /* Since we only recognize this for prologue skipping, do not bother
+ to compute the constant. */
+ regs[bits (inst2, 8, 11)] = regs[bits (insn, 0, 3)];
+ else if ((insn & 0xfbf0) == 0xf1a0 /* sub.w Rd, Rn, #imm12 */
+ && (inst2 & 0x8000) == 0x0000)
+ /* Since we only recognize this for prologue skipping, do not bother
+ to compute the constant. */
+ regs[bits (inst2, 8, 11)] = regs[bits (insn, 0, 3)];
+ else if ((insn & 0xfbf0) == 0xf2a0 /* sub.w Rd, Rn, #imm8 */
+ && (inst2 & 0x8000) == 0x0000)
+ /* Since we only recognize this for prologue skipping, do not bother
+ to compute the constant. */
+ regs[bits (inst2, 8, 11)] = regs[bits (insn, 0, 3)];
+ else if ((insn & 0xff50) == 0xf850 /* ldr.w Rd, [Rn, #imm]{!} */
+ && pv_is_register (regs[bits (insn, 0, 3)], ARM_SP_REGNUM))
+ ;
+ else if ((insn & 0xff50) == 0xe950 /* ldrd Rt, Rt2, [Rn, #imm]{!} */
+ && pv_is_register (regs[bits (insn, 0, 3)], ARM_SP_REGNUM))
+ ;
+ else if ((insn & 0xff50) == 0xf800 /* strb.w or strh.w */
+ && pv_is_register (regs[bits (insn, 0, 3)], ARM_SP_REGNUM))
+ ;
+ else
+ {
+ /* We don't know what this instruction is. We're finished
+ scanning. NOTE: Recognizing more safe-to-ignore
+ instructions here will improve support for optimized
+ code. */
+ break;
+ }
+
+ start += 2;
+ }
else
{
/* We don't know what this instruction is. We're finished
start += 2;
}
+ if (arm_debug)
+ fprintf_unfiltered (gdb_stdlog, "Prologue scan stopped at %s\n",
+ paddress (gdbarch, start));
+
if (cache == NULL)
{
do_cleanups (back_to);
CORE_ADDR func_addr, limit_pc;
struct symtab_and_line sal;
- /* If we're in a dummy frame, don't even try to skip the prologue. */
- if (deprecated_pc_in_call_dummy (gdbarch, pc))
- return pc;
-
/* See if we can determine the end of the prologue via the symbol table.
If so, then return either PC, or the PC after the prologue, whichever
is greater. */
{
CORE_ADDR post_prologue_pc
= skip_prologue_using_sal (gdbarch, func_addr);
+ struct symtab *s = find_pc_symtab (func_addr);
+
+ /* GCC always emits a line note before the prologue and another
+ one after, even if the two are at the same address or on the
+ same line. Take advantage of this so that we do not need to
+ know every instruction that might appear in the prologue. We
+ will have producer information for most binaries; if it is
+ missing (e.g. for -gstabs), assuming the GNU tools. */
+ if (post_prologue_pc
+ && (s == NULL
+ || s->producer == NULL
+ || strncmp (s->producer, "GNU ", sizeof ("GNU ") - 1) == 0))
+ return post_prologue_pc;
+
if (post_prologue_pc != 0)
- return max (pc, post_prologue_pc);
+ {
+ CORE_ADDR analyzed_limit;
+
+ /* For non-GCC compilers, make sure the entire line is an
+ acceptable prologue; GDB will round this function's
+ return value up to the end of the following line so we
+ can not skip just part of a line (and we do not want to).
+
+ RealView does not treat the prologue specially, but does
+ associate prologue code with the opening brace; so this
+ lets us skip the first line if we think it is the opening
+ brace. */
+ if (arm_pc_is_thumb (gdbarch, func_addr))
+ analyzed_limit = thumb_analyze_prologue (gdbarch, func_addr,
+ post_prologue_pc, NULL);
+ else
+ analyzed_limit = arm_analyze_prologue (gdbarch, func_addr,
+ post_prologue_pc, NULL);
+
+ if (analyzed_limit != post_prologue_pc)
+ return func_addr;
+
+ return post_prologue_pc;
+ }
}
/* Can't determine prologue from the symbol table, need to examine
/* Check if this is Thumb code. */
- if (arm_pc_is_thumb (pc))
+ if (arm_pc_is_thumb (gdbarch, pc))
return thumb_analyze_prologue (gdbarch, pc, limit_pc, NULL);
for (skip_pc = pc; skip_pc < limit_pc; skip_pc += 4)
thumb_analyze_prologue (gdbarch, prologue_start, prologue_end, cache);
}
-/* This function decodes an ARM function prologue to determine:
- 1) the size of the stack frame
- 2) which registers are saved on it
- 3) the offsets of saved regs
- 4) the offset from the stack pointer to the frame pointer
- This information is stored in the "extra" fields of the frame_info.
-
- There are two basic forms for the ARM prologue. The fixed argument
- function call will look like:
-
- mov ip, sp
- stmfd sp!, {fp, ip, lr, pc}
- sub fp, ip, #4
- [sub sp, sp, #4]
-
- Which would create this stack frame (offsets relative to FP):
- IP -> 4 (caller's stack)
- FP -> 0 PC (points to address of stmfd instruction + 8 in callee)
- -4 LR (return address in caller)
- -8 IP (copy of caller's SP)
- -12 FP (caller's FP)
- SP -> -28 Local variables
-
- The frame size would thus be 32 bytes, and the frame offset would be
- 28 bytes. The stmfd call can also save any of the vN registers it
- plans to use, which increases the frame size accordingly.
-
- Note: The stored PC is 8 off of the STMFD instruction that stored it
- because the ARM Store instructions always store PC + 8 when you read
- the PC register.
-
- A variable argument function call will look like:
-
- mov ip, sp
- stmfd sp!, {a1, a2, a3, a4}
- stmfd sp!, {fp, ip, lr, pc}
- sub fp, ip, #20
-
- Which would create this stack frame (offsets relative to FP):
- IP -> 20 (caller's stack)
- 16 A4
- 12 A3
- 8 A2
- 4 A1
- FP -> 0 PC (points to address of stmfd instruction + 8 in callee)
- -4 LR (return address in caller)
- -8 IP (copy of caller's SP)
- -12 FP (caller's FP)
- SP -> -28 Local variables
-
- The frame size would thus be 48 bytes, and the frame offset would be
- 28 bytes.
-
- There is another potential complication, which is that the optimizer
- will try to separate the store of fp in the "stmfd" instruction from
- the "sub fp, ip, #NN" instruction. Almost anything can be there, so
- we just key on the stmfd, and then scan for the "sub fp, ip, #NN"...
-
- Also, note, the original version of the ARM toolchain claimed that there
- should be an
-
- instruction at the end of the prologue. I have never seen GCC produce
- this, and the ARM docs don't mention it. We still test for it below in
- case it happens...
-
- */
+/* Return 1 if THIS_INSTR might change control flow, 0 otherwise. */
-static void
-arm_scan_prologue (struct frame_info *this_frame,
- struct arm_prologue_cache *cache)
+static int
+arm_instruction_changes_pc (uint32_t this_instr)
{
- struct gdbarch *gdbarch = get_frame_arch (this_frame);
- enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
- enum bfd_endian byte_order_for_code = gdbarch_byte_order_for_code (gdbarch);
- int regno;
- CORE_ADDR prologue_start, prologue_end, current_pc;
- CORE_ADDR prev_pc = get_frame_pc (this_frame);
- CORE_ADDR block_addr = get_frame_address_in_block (this_frame);
- pv_t regs[ARM_FPS_REGNUM];
- struct pv_area *stack;
- struct cleanup *back_to;
- CORE_ADDR offset;
+ if (bits (this_instr, 28, 31) == INST_NV)
+ /* Unconditional instructions. */
+ switch (bits (this_instr, 24, 27))
+ {
+ case 0xa:
+ case 0xb:
+ /* Branch with Link and change to Thumb. */
+ return 1;
+ case 0xc:
+ case 0xd:
+ case 0xe:
+ /* Coprocessor register transfer. */
+ if (bits (this_instr, 12, 15) == 15)
+ error (_("Invalid update to pc in instruction"));
+ return 0;
+ default:
+ return 0;
+ }
+ else
+ switch (bits (this_instr, 25, 27))
+ {
+ case 0x0:
+ if (bits (this_instr, 23, 24) == 2 && bit (this_instr, 20) == 0)
+ {
+ /* Multiplies and extra load/stores. */
+ if (bit (this_instr, 4) == 1 && bit (this_instr, 7) == 1)
+ /* Neither multiplies nor extension load/stores are allowed
+ to modify PC. */
+ return 0;
- /* Assume there is no frame until proven otherwise. */
- cache->framereg = ARM_SP_REGNUM;
- cache->framesize = 0;
+ /* Otherwise, miscellaneous instructions. */
- /* Check for Thumb prologue. */
- if (arm_frame_is_thumb (this_frame))
- {
- thumb_scan_prologue (gdbarch, prev_pc, block_addr, cache);
- return;
- }
+ /* BX <reg>, BXJ <reg>, BLX <reg> */
+ if (bits (this_instr, 4, 27) == 0x12fff1
+ || bits (this_instr, 4, 27) == 0x12fff2
+ || bits (this_instr, 4, 27) == 0x12fff3)
+ return 1;
- /* Find the function prologue. If we can't find the function in
- the symbol table, peek in the stack frame to find the PC. */
- if (find_pc_partial_function (block_addr, NULL, &prologue_start,
- &prologue_end))
- {
- /* One way to find the end of the prologue (which works well
- for unoptimized code) is to do the following:
+ /* Other miscellaneous instructions are unpredictable if they
+ modify PC. */
+ return 0;
+ }
+ /* Data processing instruction. Fall through. */
- struct symtab_and_line sal = find_pc_line (prologue_start, 0);
+ case 0x1:
+ if (bits (this_instr, 12, 15) == 15)
+ return 1;
+ else
+ return 0;
- if (sal.line == 0)
- prologue_end = prev_pc;
- else if (sal.end < prologue_end)
- prologue_end = sal.end;
+ case 0x2:
+ case 0x3:
+ /* Media instructions and architecturally undefined instructions. */
+ if (bits (this_instr, 25, 27) == 3 && bit (this_instr, 4) == 1)
+ return 0;
- This mechanism is very accurate so long as the optimizer
- doesn't move any instructions from the function body into the
- prologue. If this happens, sal.end will be the last
- instruction in the first hunk of prologue code just before
- the first instruction that the scheduler has moved from
- the body to the prologue.
+ /* Stores. */
+ if (bit (this_instr, 20) == 0)
+ return 0;
- In order to make sure that we scan all of the prologue
- instructions, we use a slightly less accurate mechanism which
- may scan more than necessary. To help compensate for this
- lack of accuracy, the prologue scanning loop below contains
- several clauses which'll cause the loop to terminate early if
- an implausible prologue instruction is encountered.
-
- The expression
-
- prologue_start + 64
-
- is a suitable endpoint since it accounts for the largest
- possible prologue plus up to five instructions inserted by
- the scheduler. */
-
- if (prologue_end > prologue_start + 64)
- {
- prologue_end = prologue_start + 64; /* See above. */
- }
- }
- else
- {
- /* We have no symbol information. Our only option is to assume this
- function has a standard stack frame and the normal frame register.
- Then, we can find the value of our frame pointer on entrance to
- the callee (or at the present moment if this is the innermost frame).
- The value stored there should be the address of the stmfd + 8. */
- CORE_ADDR frame_loc;
- LONGEST return_value;
+ /* Loads. */
+ if (bits (this_instr, 12, 15) == ARM_PC_REGNUM)
+ return 1;
+ else
+ return 0;
- frame_loc = get_frame_register_unsigned (this_frame, ARM_FP_REGNUM);
- if (!safe_read_memory_integer (frame_loc, 4, byte_order, &return_value))
- return;
- else
- {
- prologue_start = gdbarch_addr_bits_remove
- (gdbarch, return_value) - 8;
- prologue_end = prologue_start + 64; /* See above. */
- }
- }
+ case 0x4:
+ /* Load/store multiple. */
+ if (bit (this_instr, 20) == 1 && bit (this_instr, 15) == 1)
+ return 1;
+ else
+ return 0;
- if (prev_pc < prologue_end)
- prologue_end = prev_pc;
+ case 0x5:
+ /* Branch and branch with link. */
+ return 1;
+
+ case 0x6:
+ case 0x7:
+ /* Coprocessor transfers or SWIs can not affect PC. */
+ return 0;
+
+ default:
+ internal_error (__FILE__, __LINE__, "bad value in switch");
+ }
+}
+
+/* Analyze an ARM mode prologue starting at PROLOGUE_START and
+ continuing no further than PROLOGUE_END. If CACHE is non-NULL,
+ fill it in. Return the first address not recognized as a prologue
+ instruction.
+
+ We recognize all the instructions typically found in ARM prologues,
+ plus harmless instructions which can be skipped (either for analysis
+ purposes, or a more restrictive set that can be skipped when finding
+ the end of the prologue). */
+
+static CORE_ADDR
+arm_analyze_prologue (struct gdbarch *gdbarch,
+ CORE_ADDR prologue_start, CORE_ADDR prologue_end,
+ struct arm_prologue_cache *cache)
+{
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+ enum bfd_endian byte_order_for_code = gdbarch_byte_order_for_code (gdbarch);
+ int regno;
+ CORE_ADDR offset, current_pc;
+ pv_t regs[ARM_FPS_REGNUM];
+ struct pv_area *stack;
+ struct cleanup *back_to;
+ int framereg, framesize;
+ CORE_ADDR unrecognized_pc = 0;
- /* Now search the prologue looking for instructions that set up the
+ /* Search the prologue looking for instructions that set up the
frame pointer, adjust the stack pointer, and save registers.
Be careful, however, and if it doesn't look like a prologue,
begins with stmfd sp!, then we will tell ourselves there is
a frame, which will confuse stack traceback, as well as "finish"
and other operations that rely on a knowledge of the stack
- traceback.
-
- In the APCS, the prologue should start with "mov ip, sp" so
- if we don't see this as the first insn, we will stop.
-
- [Note: This doesn't seem to be true any longer, so it's now an
- optional part of the prologue. - Kevin Buettner, 2001-11-20]
-
- [Note further: The "mov ip,sp" only seems to be missing in
- frameless functions at optimization level "-O2" or above,
- in which case it is often (but not always) replaced by
- "str lr, [sp, #-4]!". - Michael Snyder, 2002-04-23] */
+ traceback. */
for (regno = 0; regno < ARM_FPS_REGNUM; regno++)
regs[regno] = pv_register (regno, 0);
regs[ARM_IP_REGNUM] = regs[ARM_SP_REGNUM];
continue;
}
- else if ((insn & 0xfffff000) == 0xe28dc000) /* add ip, sp #n */
+ else if ((insn & 0xfff00000) == 0xe2800000 /* add Rd, Rn, #n */
+ && pv_is_register (regs[bits (insn, 16, 19)], ARM_SP_REGNUM))
{
unsigned imm = insn & 0xff; /* immediate value */
unsigned rot = (insn & 0xf00) >> 7; /* rotate amount */
+ int rd = bits (insn, 12, 15);
imm = (imm >> rot) | (imm << (32 - rot));
- regs[ARM_IP_REGNUM] = pv_add_constant (regs[ARM_SP_REGNUM], imm);
+ regs[rd] = pv_add_constant (regs[bits (insn, 16, 19)], imm);
continue;
}
- else if ((insn & 0xfffff000) == 0xe24dc000) /* sub ip, sp #n */
+ else if ((insn & 0xfff00000) == 0xe2400000 /* sub Rd, Rn, #n */
+ && pv_is_register (regs[bits (insn, 16, 19)], ARM_SP_REGNUM))
{
unsigned imm = insn & 0xff; /* immediate value */
unsigned rot = (insn & 0xf00) >> 7; /* rotate amount */
+ int rd = bits (insn, 12, 15);
imm = (imm >> rot) | (imm << (32 - rot));
- regs[ARM_IP_REGNUM] = pv_add_constant (regs[ARM_SP_REGNUM], -imm);
+ regs[rd] = pv_add_constant (regs[bits (insn, 16, 19)], -imm);
continue;
}
- else if (insn == 0xe52de004) /* str lr, [sp, #-4]! */
+ else if ((insn & 0xffff0fff) == 0xe52d0004) /* str Rd, [sp, #-4]! */
{
if (pv_area_store_would_trash (stack, regs[ARM_SP_REGNUM]))
break;
regs[ARM_SP_REGNUM] = pv_add_constant (regs[ARM_SP_REGNUM], -4);
- pv_area_store (stack, regs[ARM_SP_REGNUM], 4, regs[ARM_LR_REGNUM]);
+ pv_area_store (stack, regs[ARM_SP_REGNUM], 4,
+ regs[bits (insn, 12, 15)]);
continue;
}
else if ((insn & 0xffff0000) == 0xe92d0000)
pv_area_store (stack, regs[ARM_SP_REGNUM], 4, regs[regno]);
}
}
- else if ((insn & 0xffffc000) == 0xe54b0000 /* strb rx,[r11,#-n] */
- || (insn & 0xffffc0f0) == 0xe14b00b0 /* strh rx,[r11,#-n] */
+ else if ((insn & 0xffff0000) == 0xe54b0000 /* strb rx,[r11,#-n] */
+ || (insn & 0xffff00f0) == 0xe14b00b0 /* strh rx,[r11,#-n] */
|| (insn & 0xffffc000) == 0xe50b0000) /* str rx,[r11,#-n] */
{
/* No need to add this to saved_regs -- it's just an arg reg. */
continue;
}
- else if ((insn & 0xffffc000) == 0xe5cd0000 /* strb rx,[sp,#n] */
- || (insn & 0xffffc0f0) == 0xe1cd00b0 /* strh rx,[sp,#n] */
+ else if ((insn & 0xffff0000) == 0xe5cd0000 /* strb rx,[sp,#n] */
+ || (insn & 0xffff00f0) == 0xe1cd00b0 /* strh rx,[sp,#n] */
|| (insn & 0xffffc000) == 0xe58d0000) /* str rx,[sp,#n] */
{
/* No need to add this to saved_regs -- it's just an arg reg. */
continue;
}
+ else if ((insn & 0xfff00000) == 0xe8800000 /* stm Rn, { registers } */
+ && pv_is_register (regs[bits (insn, 16, 19)], ARM_SP_REGNUM))
+ {
+ /* No need to add this to saved_regs -- it's just arg regs. */
+ continue;
+ }
else if ((insn & 0xfffff000) == 0xe24cb000) /* sub fp, ip #n */
{
unsigned imm = insn & 0xff; /* immediate value */
regs[fp_start_reg++]);
}
}
+ else if ((insn & 0xff000000) == 0xeb000000 && cache == NULL) /* bl */
+ {
+ /* Allow some special function calls when skipping the
+ prologue; GCC generates these before storing arguments to
+ the stack. */
+ CORE_ADDR dest = BranchDest (current_pc, insn);
+
+ if (skip_prologue_function (dest))
+ continue;
+ else
+ break;
+ }
else if ((insn & 0xf0000000) != 0xe0000000)
break; /* Condition not true, exit early */
- else if ((insn & 0xfe200000) == 0xe8200000) /* ldm? */
- break; /* Don't scan past a block load */
- else
- /* The optimizer might shove anything into the prologue,
- so we just skip what we don't recognize. */
+ else if (arm_instruction_changes_pc (insn))
+ /* Don't scan past anything that might change control flow. */
+ break;
+ else if ((insn & 0xfe500000) == 0xe8100000) /* ldm */
+ {
+ /* Ignore block loads from the stack, potentially copying
+ parameters from memory. */
+ if (pv_is_register (regs[bits (insn, 16, 19)], ARM_SP_REGNUM))
+ continue;
+ else
+ break;
+ }
+ else if ((insn & 0xfc500000) == 0xe4100000)
+ {
+ /* Similarly ignore single loads from the stack. */
+ if (pv_is_register (regs[bits (insn, 16, 19)], ARM_SP_REGNUM))
+ continue;
+ else
+ break;
+ }
+ else if ((insn & 0xffff0ff0) == 0xe1a00000)
+ /* MOV Rd, Rm. Skip register copies, i.e. saves to another
+ register instead of the stack. */
continue;
+ else
+ {
+ /* The optimizer might shove anything into the prologue,
+ so we just skip what we don't recognize. */
+ unrecognized_pc = current_pc;
+ continue;
+ }
}
+ if (unrecognized_pc == 0)
+ unrecognized_pc = current_pc;
+
/* The frame size is just the distance from the frame register
to the original stack pointer. */
if (pv_is_register (regs[ARM_FP_REGNUM], ARM_SP_REGNUM))
{
/* Frame pointer is fp. */
- cache->framereg = ARM_FP_REGNUM;
- cache->framesize = -regs[ARM_FP_REGNUM].k;
+ framereg = ARM_FP_REGNUM;
+ framesize = -regs[ARM_FP_REGNUM].k;
}
else if (pv_is_register (regs[ARM_SP_REGNUM], ARM_SP_REGNUM))
{
/* Try the stack pointer... this is a bit desperate. */
- cache->framereg = ARM_SP_REGNUM;
- cache->framesize = -regs[ARM_SP_REGNUM].k;
+ framereg = ARM_SP_REGNUM;
+ framesize = -regs[ARM_SP_REGNUM].k;
}
else
{
/* We're just out of luck. We don't know where the frame is. */
- cache->framereg = -1;
- cache->framesize = 0;
+ framereg = -1;
+ framesize = 0;
}
- for (regno = 0; regno < ARM_FPS_REGNUM; regno++)
- if (pv_area_find_reg (stack, gdbarch, regno, &offset))
- cache->saved_regs[regno].addr = offset;
+ if (cache)
+ {
+ cache->framereg = framereg;
+ cache->framesize = framesize;
+
+ for (regno = 0; regno < ARM_FPS_REGNUM; regno++)
+ if (pv_area_find_reg (stack, gdbarch, regno, &offset))
+ cache->saved_regs[regno].addr = offset;
+ }
+
+ if (arm_debug)
+ fprintf_unfiltered (gdb_stdlog, "Prologue scan stopped at %s\n",
+ paddress (gdbarch, unrecognized_pc));
do_cleanups (back_to);
+ return unrecognized_pc;
}
-static struct arm_prologue_cache *
-arm_make_prologue_cache (struct frame_info *this_frame)
+static void
+arm_scan_prologue (struct frame_info *this_frame,
+ struct arm_prologue_cache *cache)
{
- int reg;
- struct arm_prologue_cache *cache;
- CORE_ADDR unwound_fp;
-
- cache = FRAME_OBSTACK_ZALLOC (struct arm_prologue_cache);
- cache->saved_regs = trad_frame_alloc_saved_regs (this_frame);
-
- arm_scan_prologue (this_frame, cache);
-
+ struct gdbarch *gdbarch = get_frame_arch (this_frame);
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+ int regno;
+ CORE_ADDR prologue_start, prologue_end, current_pc;
+ CORE_ADDR prev_pc = get_frame_pc (this_frame);
+ CORE_ADDR block_addr = get_frame_address_in_block (this_frame);
+ pv_t regs[ARM_FPS_REGNUM];
+ struct pv_area *stack;
+ struct cleanup *back_to;
+ CORE_ADDR offset;
+
+ /* Assume there is no frame until proven otherwise. */
+ cache->framereg = ARM_SP_REGNUM;
+ cache->framesize = 0;
+
+ /* Check for Thumb prologue. */
+ if (arm_frame_is_thumb (this_frame))
+ {
+ thumb_scan_prologue (gdbarch, prev_pc, block_addr, cache);
+ return;
+ }
+
+ /* Find the function prologue. If we can't find the function in
+ the symbol table, peek in the stack frame to find the PC. */
+ if (find_pc_partial_function (block_addr, NULL, &prologue_start,
+ &prologue_end))
+ {
+ /* One way to find the end of the prologue (which works well
+ for unoptimized code) is to do the following:
+
+ struct symtab_and_line sal = find_pc_line (prologue_start, 0);
+
+ if (sal.line == 0)
+ prologue_end = prev_pc;
+ else if (sal.end < prologue_end)
+ prologue_end = sal.end;
+
+ This mechanism is very accurate so long as the optimizer
+ doesn't move any instructions from the function body into the
+ prologue. If this happens, sal.end will be the last
+ instruction in the first hunk of prologue code just before
+ the first instruction that the scheduler has moved from
+ the body to the prologue.
+
+ In order to make sure that we scan all of the prologue
+ instructions, we use a slightly less accurate mechanism which
+ may scan more than necessary. To help compensate for this
+ lack of accuracy, the prologue scanning loop below contains
+ several clauses which'll cause the loop to terminate early if
+ an implausible prologue instruction is encountered.
+
+ The expression
+
+ prologue_start + 64
+
+ is a suitable endpoint since it accounts for the largest
+ possible prologue plus up to five instructions inserted by
+ the scheduler. */
+
+ if (prologue_end > prologue_start + 64)
+ {
+ prologue_end = prologue_start + 64; /* See above. */
+ }
+ }
+ else
+ {
+ /* We have no symbol information. Our only option is to assume this
+ function has a standard stack frame and the normal frame register.
+ Then, we can find the value of our frame pointer on entrance to
+ the callee (or at the present moment if this is the innermost frame).
+ The value stored there should be the address of the stmfd + 8. */
+ CORE_ADDR frame_loc;
+ LONGEST return_value;
+
+ frame_loc = get_frame_register_unsigned (this_frame, ARM_FP_REGNUM);
+ if (!safe_read_memory_integer (frame_loc, 4, byte_order, &return_value))
+ return;
+ else
+ {
+ prologue_start = gdbarch_addr_bits_remove
+ (gdbarch, return_value) - 8;
+ prologue_end = prologue_start + 64; /* See above. */
+ }
+ }
+
+ if (prev_pc < prologue_end)
+ prologue_end = prev_pc;
+
+ arm_analyze_prologue (gdbarch, prologue_start, prologue_end, cache);
+}
+
+static struct arm_prologue_cache *
+arm_make_prologue_cache (struct frame_info *this_frame)
+{
+ int reg;
+ struct arm_prologue_cache *cache;
+ CORE_ADDR unwound_fp;
+
+ cache = FRAME_OBSTACK_ZALLOC (struct arm_prologue_cache);
+ cache->saved_regs = trad_frame_alloc_saved_regs (this_frame);
+
+ arm_scan_prologue (this_frame, cache);
+
unwound_fp = get_frame_register_unsigned (this_frame, cache->framereg);
if (unwound_fp == 0)
return cache;
if (prev_regnum == ARM_PS_REGNUM)
{
CORE_ADDR lr, cpsr;
+ ULONGEST t_bit = arm_psr_thumb_bit (gdbarch);
cpsr = get_frame_register_unsigned (this_frame, prev_regnum);
lr = frame_unwind_register_unsigned (this_frame, ARM_LR_REGNUM);
if (IS_THUMB_ADDR (lr))
- cpsr |= CPSR_T;
+ cpsr |= t_bit;
else
- cpsr &= ~CPSR_T;
+ cpsr &= ~t_bit;
return frame_unwind_got_constant (this_frame, prev_regnum, cpsr);
}
static struct arm_prologue_cache *
arm_make_stub_cache (struct frame_info *this_frame)
{
- int reg;
struct arm_prologue_cache *cache;
- CORE_ADDR unwound_fp;
cache = FRAME_OBSTACK_ZALLOC (struct arm_prologue_cache);
cache->saved_regs = trad_frame_alloc_saved_regs (this_frame);
{
struct gdbarch * gdbarch = get_frame_arch (this_frame);
CORE_ADDR lr, cpsr;
+ ULONGEST t_bit = arm_psr_thumb_bit (gdbarch);
switch (regnum)
{
cpsr = get_frame_register_unsigned (this_frame, regnum);
lr = frame_unwind_register_unsigned (this_frame, ARM_LR_REGNUM);
if (IS_THUMB_ADDR (lr))
- cpsr |= CPSR_T;
+ cpsr |= t_bit;
else
- cpsr &= ~CPSR_T;
+ cpsr &= ~t_bit;
return frame_unwind_got_constant (this_frame, regnum, cpsr);
default:
};
static struct stack_item *
-push_stack_item (struct stack_item *prev, void *contents, int len)
+push_stack_item (struct stack_item *prev, const void *contents, int len)
{
struct stack_item *si;
si = xmalloc (sizeof (struct stack_item));
/* Set the return address. For the ARM, the return breakpoint is
always at BP_ADDR. */
- if (arm_pc_is_thumb (bp_addr))
+ if (arm_pc_is_thumb (gdbarch, bp_addr))
bp_addr |= 1;
regcache_cooked_write_unsigned (regcache, ARM_LR_REGNUM, bp_addr);
struct type *arg_type;
struct type *target_type;
enum type_code typecode;
- bfd_byte *val;
+ const bfd_byte *val;
int align;
enum arm_vfp_cprc_base_type vfp_base_type;
int vfp_base_count;
len = TYPE_LENGTH (arg_type);
target_type = TYPE_TARGET_TYPE (arg_type);
typecode = TYPE_CODE (arg_type);
- val = value_contents_writeable (args[argnum]);
+ val = value_contents (args[argnum]);
align = arm_type_align (arg_type);
/* Round alignment up to a whole number of words. */
the THUMB bit in it. */
if (TYPE_CODE_PTR == typecode
&& target_type != NULL
- && TYPE_CODE_FUNC == TYPE_CODE (target_type))
+ && TYPE_CODE_FUNC == TYPE_CODE (check_typedef (target_type)))
{
CORE_ADDR regval = extract_unsigned_integer (val, len, byte_order);
- if (arm_pc_is_thumb (regval))
+ if (arm_pc_is_thumb (gdbarch, regval))
{
- val = alloca (len);
- store_unsigned_integer (val, len, byte_order,
+ bfd_byte *copy = alloca (len);
+ store_unsigned_integer (copy, len, byte_order,
MAKE_THUMB_ADDR (regval));
+ val = copy;
}
}
return 1;
}
-/* Support routines for single stepping. Calculate the next PC value. */
-#define submask(x) ((1L << ((x) + 1)) - 1)
-#define bit(obj,st) (((obj) >> (st)) & 1)
-#define bits(obj,st,fn) (((obj) >> (st)) & submask ((fn) - (st)))
-#define sbits(obj,st,fn) \
- ((long) (bits(obj,st,fn) | ((long) bit(obj,fn) * ~ submask (fn - st))))
-#define BranchDest(addr,instr) \
- ((CORE_ADDR) (((long) (addr)) + 8 + (sbits (instr, 0, 23) << 2)))
-#define ARM_PC_32 1
-
static unsigned long
shifted_reg_val (struct frame_info *frame, unsigned long inst, int carry,
unsigned long pc_val, unsigned long status_reg)
shift = bits (inst, 7, 11);
res = (rm == 15
- ? ((pc_val | (ARM_PC_32 ? 0 : status_reg))
- + (bit (inst, 4) ? 12 : 8))
+ ? (pc_val + (bit (inst, 4) ? 12 : 8))
: get_frame_register_unsigned (frame, rm));
switch (shifttype)
else if ((inst1 & 0xfff0) == 0xe8d0 && (inst2 & 0xfff0) == 0xf000)
{
/* TBB. */
- CORE_ADDR table, offset, length;
+ CORE_ADDR tbl_reg, table, offset, length;
+
+ tbl_reg = bits (inst1, 0, 3);
+ if (tbl_reg == 0x0f)
+ table = pc + 4; /* Regcache copy of PC isn't right yet. */
+ else
+ table = get_frame_register_unsigned (frame, tbl_reg);
- table = get_frame_register_unsigned (frame, bits (inst1, 0, 3));
offset = get_frame_register_unsigned (frame, bits (inst2, 0, 3));
length = 2 * get_frame_memory_unsigned (frame, table + offset, 1);
nextpc = pc_val + length;
}
- else if ((inst1 & 0xfff0) == 0xe8d0 && (inst2 & 0xfff0) == 0xf000)
+ else if ((inst1 & 0xfff0) == 0xe8d0 && (inst2 & 0xfff0) == 0xf010)
{
/* TBH. */
- CORE_ADDR table, offset, length;
+ CORE_ADDR tbl_reg, table, offset, length;
+
+ tbl_reg = bits (inst1, 0, 3);
+ if (tbl_reg == 0x0f)
+ table = pc + 4; /* Regcache copy of PC isn't right yet. */
+ else
+ table = get_frame_register_unsigned (frame, tbl_reg);
- table = get_frame_register_unsigned (frame, bits (inst1, 0, 3));
offset = 2 * get_frame_register_unsigned (frame, bits (inst2, 0, 3));
length = 2 * get_frame_memory_unsigned (frame, table + offset, 2);
nextpc = pc_val + length;
return bpaddr;
/* ARM mode does not have this problem. */
- if (!arm_pc_is_thumb (bpaddr))
+ if (!arm_pc_is_thumb (gdbarch, bpaddr))
return bpaddr;
/* We are setting a breakpoint in Thumb code that could potentially
displaced_in_arm_mode (struct regcache *regs)
{
ULONGEST ps;
+ ULONGEST t_bit = arm_psr_thumb_bit (get_regcache_arch (regs));
regcache_cooked_read_unsigned (regs, ARM_PS_REGNUM, &ps);
- return (ps & CPSR_T) == 0;
+ return (ps & t_bit) == 0;
}
/* Write to the PC as from a branch instruction. */
bx_write_pc (struct regcache *regs, ULONGEST val)
{
ULONGEST ps;
+ ULONGEST t_bit = arm_psr_thumb_bit (get_regcache_arch (regs));
regcache_cooked_read_unsigned (regs, ARM_PS_REGNUM, &ps);
if ((val & 1) == 1)
{
- regcache_cooked_write_unsigned (regs, ARM_PS_REGNUM, ps | CPSR_T);
+ regcache_cooked_write_unsigned (regs, ARM_PS_REGNUM, ps | t_bit);
regcache_cooked_write_unsigned (regs, ARM_PC_REGNUM, val & 0xfffffffe);
}
else if ((val & 2) == 0)
{
- regcache_cooked_write_unsigned (regs, ARM_PS_REGNUM,
- ps & ~(ULONGEST) CPSR_T);
+ regcache_cooked_write_unsigned (regs, ARM_PS_REGNUM, ps & ~t_bit);
regcache_cooked_write_unsigned (regs, ARM_PC_REGNUM, val);
}
else
/* Unpredictable behaviour. Try to do something sensible (switch to ARM
mode, align dest to 4 bytes). */
warning (_("Single-stepping BX to non-word-aligned ARM instruction."));
- regcache_cooked_write_unsigned (regs, ARM_PS_REGNUM,
- ps & ~(ULONGEST) CPSR_T);
+ regcache_cooked_write_unsigned (regs, ARM_PS_REGNUM, ps & ~t_bit);
regcache_cooked_write_unsigned (regs, ARM_PC_REGNUM, val & 0xfffffffc);
}
}
matter what address they are executed at: in those cases, use this. */
static int
-copy_unmodified (struct gdbarch *gdbarch ATTRIBUTE_UNUSED, uint32_t insn,
+copy_unmodified (struct gdbarch *gdbarch, uint32_t insn,
const char *iname, struct displaced_step_closure *dsc)
{
if (debug_displaced)
/* Preload instructions with immediate offset. */
static void
-cleanup_preload (struct gdbarch *gdbarch ATTRIBUTE_UNUSED,
+cleanup_preload (struct gdbarch *gdbarch,
struct regcache *regs, struct displaced_step_closure *dsc)
{
displaced_write_reg (regs, dsc, 0, dsc->tmp[0], CANNOT_WRITE_PC);
/* Copy/cleanup coprocessor load and store instructions. */
static void
-cleanup_copro_load_store (struct gdbarch *gdbarch ATTRIBUTE_UNUSED,
+cleanup_copro_load_store (struct gdbarch *gdbarch,
struct regcache *regs,
struct displaced_step_closure *dsc)
{
PC). */
static void
-cleanup_branch (struct gdbarch *gdbarch ATTRIBUTE_UNUSED, struct regcache *regs,
+cleanup_branch (struct gdbarch *gdbarch, struct regcache *regs,
struct displaced_step_closure *dsc)
{
ULONGEST from = dsc->insn_addr;
/* Copy B/BL/BLX instructions with immediate destinations. */
static int
-copy_b_bl_blx (struct gdbarch *gdbarch ATTRIBUTE_UNUSED, uint32_t insn,
+copy_b_bl_blx (struct gdbarch *gdbarch, uint32_t insn,
struct regcache *regs, struct displaced_step_closure *dsc)
{
unsigned int cond = bits (insn, 28, 31);
/* Copy BX/BLX with register-specified destinations. */
static int
-copy_bx_blx_reg (struct gdbarch *gdbarch ATTRIBUTE_UNUSED, uint32_t insn,
+copy_bx_blx_reg (struct gdbarch *gdbarch, uint32_t insn,
struct regcache *regs, struct displaced_step_closure *dsc)
{
unsigned int cond = bits (insn, 28, 31);
/* Copy/cleanup arithmetic/logic instruction with immediate RHS. */
static void
-cleanup_alu_imm (struct gdbarch *gdbarch ATTRIBUTE_UNUSED,
+cleanup_alu_imm (struct gdbarch *gdbarch,
struct regcache *regs, struct displaced_step_closure *dsc)
{
ULONGEST rd_val = displaced_read_reg (regs, dsc->insn_addr, 0);
/* Copy/cleanup arithmetic/logic insns with register RHS. */
static void
-cleanup_alu_reg (struct gdbarch *gdbarch ATTRIBUTE_UNUSED,
+cleanup_alu_reg (struct gdbarch *gdbarch,
struct regcache *regs, struct displaced_step_closure *dsc)
{
ULONGEST rd_val;
/* Cleanup/copy arithmetic/logic insns with shifted register RHS. */
static void
-cleanup_alu_shifted_reg (struct gdbarch *gdbarch ATTRIBUTE_UNUSED,
+cleanup_alu_shifted_reg (struct gdbarch *gdbarch,
struct regcache *regs,
struct displaced_step_closure *dsc)
{
/* Clean up load instructions. */
static void
-cleanup_load (struct gdbarch *gdbarch ATTRIBUTE_UNUSED, struct regcache *regs,
+cleanup_load (struct gdbarch *gdbarch, struct regcache *regs,
struct displaced_step_closure *dsc)
{
ULONGEST rt_val, rt_val2 = 0, rn_val;
/* Clean up store instructions. */
static void
-cleanup_store (struct gdbarch *gdbarch ATTRIBUTE_UNUSED, struct regcache *regs,
+cleanup_store (struct gdbarch *gdbarch, struct regcache *regs,
struct displaced_step_closure *dsc)
{
CORE_ADDR from = dsc->insn_addr;
must undo that here. */
static void
-cleanup_block_load_pc (struct gdbarch *gdbarch ATTRIBUTE_UNUSED,
+cleanup_block_load_pc (struct gdbarch *gdbarch,
struct regcache *regs,
struct displaced_step_closure *dsc)
{
for Linux, where some SVC instructions must be treated specially. */
static void
-cleanup_svc (struct gdbarch *gdbarch ATTRIBUTE_UNUSED, struct regcache *regs,
+cleanup_svc (struct gdbarch *gdbarch, struct regcache *regs,
struct displaced_step_closure *dsc)
{
CORE_ADDR from = dsc->insn_addr;
/* Copy undefined instructions. */
static int
-copy_undef (struct gdbarch *gdbarch ATTRIBUTE_UNUSED, uint32_t insn,
+copy_undef (struct gdbarch *gdbarch, uint32_t insn,
struct displaced_step_closure *dsc)
{
if (debug_displaced)
/* Copy unpredictable instructions. */
static int
-copy_unpred (struct gdbarch *gdbarch ATTRIBUTE_UNUSED, uint32_t insn,
+copy_unpred (struct gdbarch *gdbarch, uint32_t insn,
struct displaced_step_closure *dsc)
{
if (debug_displaced)
static int
gdb_print_insn_arm (bfd_vma memaddr, disassemble_info *info)
{
- if (arm_pc_is_thumb (memaddr))
+ struct gdbarch *gdbarch = info->application_data;
+
+ if (arm_pc_is_thumb (gdbarch, memaddr))
{
static asymbol *asym;
static combined_entry_type ce;
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
enum bfd_endian byte_order_for_code = gdbarch_byte_order_for_code (gdbarch);
- if (arm_pc_is_thumb (*pcptr))
+ if (arm_pc_is_thumb (gdbarch, *pcptr))
{
*pcptr = UNMAKE_THUMB_ADDR (*pcptr);
arm_breakpoint_from_pc (gdbarch, pcptr, kindptr);
- if (arm_pc_is_thumb (*pcptr) && *kindptr == 4)
+ if (arm_pc_is_thumb (gdbarch, *pcptr) && *kindptr == 4)
/* The documented magic value for a 32-bit Thumb-2 breakpoint, so
that this is not confused with a 32-bit ARM breakpoint. */
*kindptr = 3;
static void
arm_write_pc (struct regcache *regcache, CORE_ADDR pc)
{
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
regcache_cooked_write_unsigned (regcache, ARM_PC_REGNUM, pc);
/* If necessary, set the T bit. */
if (arm_apcs_32)
{
- ULONGEST val;
+ ULONGEST val, t_bit;
regcache_cooked_read_unsigned (regcache, ARM_PS_REGNUM, &val);
- if (arm_pc_is_thumb (pc))
- regcache_cooked_write_unsigned (regcache, ARM_PS_REGNUM, val | CPSR_T);
+ t_bit = arm_psr_thumb_bit (gdbarch);
+ if (arm_pc_is_thumb (gdbarch, pc))
+ regcache_cooked_write_unsigned (regcache, ARM_PS_REGNUM,
+ val | t_bit);
else
regcache_cooked_write_unsigned (regcache, ARM_PS_REGNUM,
- val & ~(ULONGEST) CPSR_T);
+ val & ~t_bit);
}
}
enum arm_abi_kind arm_abi = arm_abi_global;
enum arm_float_model fp_model = arm_fp_model;
struct tdesc_arch_data *tdesc_data = NULL;
- int i;
+ int i, is_m = 0;
int have_vfp_registers = 0, have_vfp_pseudos = 0, have_neon_pseudos = 0;
int have_neon = 0;
int have_fpa_registers = 1;
+ const struct target_desc *tdesc = info.target_desc;
+
+ /* If we have an object to base this architecture on, try to determine
+ its ABI. */
+
+ if (arm_abi == ARM_ABI_AUTO && info.abfd != NULL)
+ {
+ int ei_osabi, e_flags;
+
+ switch (bfd_get_flavour (info.abfd))
+ {
+ case bfd_target_aout_flavour:
+ /* Assume it's an old APCS-style ABI. */
+ arm_abi = ARM_ABI_APCS;
+ break;
+
+ case bfd_target_coff_flavour:
+ /* Assume it's an old APCS-style ABI. */
+ /* XXX WinCE? */
+ arm_abi = ARM_ABI_APCS;
+ break;
+
+ case bfd_target_elf_flavour:
+ ei_osabi = elf_elfheader (info.abfd)->e_ident[EI_OSABI];
+ e_flags = elf_elfheader (info.abfd)->e_flags;
+
+ if (ei_osabi == ELFOSABI_ARM)
+ {
+ /* GNU tools used to use this value, but do not for EABI
+ objects. There's nowhere to tag an EABI version
+ anyway, so assume APCS. */
+ arm_abi = ARM_ABI_APCS;
+ }
+ else if (ei_osabi == ELFOSABI_NONE)
+ {
+ int eabi_ver = EF_ARM_EABI_VERSION (e_flags);
+ int attr_arch, attr_profile;
+
+ switch (eabi_ver)
+ {
+ case EF_ARM_EABI_UNKNOWN:
+ /* Assume GNU tools. */
+ arm_abi = ARM_ABI_APCS;
+ break;
+
+ case EF_ARM_EABI_VER4:
+ case EF_ARM_EABI_VER5:
+ arm_abi = ARM_ABI_AAPCS;
+ /* EABI binaries default to VFP float ordering.
+ They may also contain build attributes that can
+ be used to identify if the VFP argument-passing
+ ABI is in use. */
+ if (fp_model == ARM_FLOAT_AUTO)
+ {
+#ifdef HAVE_ELF
+ switch (bfd_elf_get_obj_attr_int (info.abfd,
+ OBJ_ATTR_PROC,
+ Tag_ABI_VFP_args))
+ {
+ case 0:
+ /* "The user intended FP parameter/result
+ passing to conform to AAPCS, base
+ variant". */
+ fp_model = ARM_FLOAT_SOFT_VFP;
+ break;
+ case 1:
+ /* "The user intended FP parameter/result
+ passing to conform to AAPCS, VFP
+ variant". */
+ fp_model = ARM_FLOAT_VFP;
+ break;
+ case 2:
+ /* "The user intended FP parameter/result
+ passing to conform to tool chain-specific
+ conventions" - we don't know any such
+ conventions, so leave it as "auto". */
+ break;
+ default:
+ /* Attribute value not mentioned in the
+ October 2008 ABI, so leave it as
+ "auto". */
+ break;
+ }
+#else
+ fp_model = ARM_FLOAT_SOFT_VFP;
+#endif
+ }
+ break;
+
+ default:
+ /* Leave it as "auto". */
+ warning (_("unknown ARM EABI version 0x%x"), eabi_ver);
+ break;
+ }
+
+#ifdef HAVE_ELF
+ /* Detect M-profile programs. This only works if the
+ executable file includes build attributes; GCC does
+ copy them to the executable, but e.g. RealView does
+ not. */
+ attr_arch = bfd_elf_get_obj_attr_int (info.abfd, OBJ_ATTR_PROC,
+ Tag_CPU_arch);
+ attr_profile = bfd_elf_get_obj_attr_int (info.abfd, OBJ_ATTR_PROC,
+ Tag_CPU_arch_profile);
+ /* GCC specifies the profile for v6-M; RealView only
+ specifies the profile for architectures starting with
+ V7 (as opposed to architectures with a tag
+ numerically greater than TAG_CPU_ARCH_V7). */
+ if (!tdesc_has_registers (tdesc)
+ && (attr_arch == TAG_CPU_ARCH_V6_M
+ || attr_arch == TAG_CPU_ARCH_V6S_M
+ || attr_profile == 'M'))
+ tdesc = tdesc_arm_with_m;
+#endif
+ }
+
+ if (fp_model == ARM_FLOAT_AUTO)
+ {
+ int e_flags = elf_elfheader (info.abfd)->e_flags;
+
+ switch (e_flags & (EF_ARM_SOFT_FLOAT | EF_ARM_VFP_FLOAT))
+ {
+ case 0:
+ /* Leave it as "auto". Strictly speaking this case
+ means FPA, but almost nobody uses that now, and
+ many toolchains fail to set the appropriate bits
+ for the floating-point model they use. */
+ break;
+ case EF_ARM_SOFT_FLOAT:
+ fp_model = ARM_FLOAT_SOFT_FPA;
+ break;
+ case EF_ARM_VFP_FLOAT:
+ fp_model = ARM_FLOAT_VFP;
+ break;
+ case EF_ARM_SOFT_FLOAT | EF_ARM_VFP_FLOAT:
+ fp_model = ARM_FLOAT_SOFT_VFP;
+ break;
+ }
+ }
+
+ if (e_flags & EF_ARM_BE8)
+ info.byte_order_for_code = BFD_ENDIAN_LITTLE;
+
+ break;
+
+ default:
+ /* Leave it as "auto". */
+ break;
+ }
+ }
/* Check any target description for validity. */
- if (tdesc_has_registers (info.target_desc))
+ if (tdesc_has_registers (tdesc))
{
/* For most registers we require GDB's default names; but also allow
the numeric names for sp / lr / pc, as a convenience. */
const struct tdesc_feature *feature;
int valid_p;
- feature = tdesc_find_feature (info.target_desc,
+ feature = tdesc_find_feature (tdesc,
"org.gnu.gdb.arm.core");
if (feature == NULL)
- return NULL;
+ {
+ feature = tdesc_find_feature (tdesc,
+ "org.gnu.gdb.arm.m-profile");
+ if (feature == NULL)
+ return NULL;
+ else
+ is_m = 1;
+ }
tdesc_data = tdesc_data_alloc ();
valid_p &= tdesc_numbered_register_choices (feature, tdesc_data,
ARM_PC_REGNUM,
arm_pc_names);
- valid_p &= tdesc_numbered_register (feature, tdesc_data,
- ARM_PS_REGNUM, "cpsr");
+ if (is_m)
+ valid_p &= tdesc_numbered_register (feature, tdesc_data,
+ ARM_PS_REGNUM, "xpsr");
+ else
+ valid_p &= tdesc_numbered_register (feature, tdesc_data,
+ ARM_PS_REGNUM, "cpsr");
if (!valid_p)
{
return NULL;
}
- feature = tdesc_find_feature (info.target_desc,
+ feature = tdesc_find_feature (tdesc,
"org.gnu.gdb.arm.fpa");
if (feature != NULL)
{
else
have_fpa_registers = 0;
- feature = tdesc_find_feature (info.target_desc,
+ feature = tdesc_find_feature (tdesc,
"org.gnu.gdb.xscale.iwmmxt");
if (feature != NULL)
{
/* If we have a VFP unit, check whether the single precision registers
are present. If not, then we will synthesize them as pseudo
registers. */
- feature = tdesc_find_feature (info.target_desc,
+ feature = tdesc_find_feature (tdesc,
"org.gnu.gdb.arm.vfp");
if (feature != NULL)
{
/* If we have VFP, also check for NEON. The architecture allows
NEON without VFP (integer vector operations only), but GDB
does not support that. */
- feature = tdesc_find_feature (info.target_desc,
+ feature = tdesc_find_feature (tdesc,
"org.gnu.gdb.arm.neon");
if (feature != NULL)
{
}
}
- /* If we have an object to base this architecture on, try to determine
- its ABI. */
-
- if (arm_abi == ARM_ABI_AUTO && info.abfd != NULL)
- {
- int ei_osabi, e_flags;
-
- switch (bfd_get_flavour (info.abfd))
- {
- case bfd_target_aout_flavour:
- /* Assume it's an old APCS-style ABI. */
- arm_abi = ARM_ABI_APCS;
- break;
-
- case bfd_target_coff_flavour:
- /* Assume it's an old APCS-style ABI. */
- /* XXX WinCE? */
- arm_abi = ARM_ABI_APCS;
- break;
-
- case bfd_target_elf_flavour:
- ei_osabi = elf_elfheader (info.abfd)->e_ident[EI_OSABI];
- e_flags = elf_elfheader (info.abfd)->e_flags;
-
- if (ei_osabi == ELFOSABI_ARM)
- {
- /* GNU tools used to use this value, but do not for EABI
- objects. There's nowhere to tag an EABI version
- anyway, so assume APCS. */
- arm_abi = ARM_ABI_APCS;
- }
- else if (ei_osabi == ELFOSABI_NONE)
- {
- int eabi_ver = EF_ARM_EABI_VERSION (e_flags);
-
- switch (eabi_ver)
- {
- case EF_ARM_EABI_UNKNOWN:
- /* Assume GNU tools. */
- arm_abi = ARM_ABI_APCS;
- break;
-
- case EF_ARM_EABI_VER4:
- case EF_ARM_EABI_VER5:
- arm_abi = ARM_ABI_AAPCS;
- /* EABI binaries default to VFP float ordering.
- They may also contain build attributes that can
- be used to identify if the VFP argument-passing
- ABI is in use. */
- if (fp_model == ARM_FLOAT_AUTO)
- {
-#ifdef HAVE_ELF
- switch (bfd_elf_get_obj_attr_int (info.abfd,
- OBJ_ATTR_PROC,
- Tag_ABI_VFP_args))
- {
- case 0:
- /* "The user intended FP parameter/result
- passing to conform to AAPCS, base
- variant". */
- fp_model = ARM_FLOAT_SOFT_VFP;
- break;
- case 1:
- /* "The user intended FP parameter/result
- passing to conform to AAPCS, VFP
- variant". */
- fp_model = ARM_FLOAT_VFP;
- break;
- case 2:
- /* "The user intended FP parameter/result
- passing to conform to tool chain-specific
- conventions" - we don't know any such
- conventions, so leave it as "auto". */
- break;
- default:
- /* Attribute value not mentioned in the
- October 2008 ABI, so leave it as
- "auto". */
- break;
- }
-#else
- fp_model = ARM_FLOAT_SOFT_VFP;
-#endif
- }
- break;
-
- default:
- /* Leave it as "auto". */
- warning (_("unknown ARM EABI version 0x%x"), eabi_ver);
- break;
- }
- }
-
- if (fp_model == ARM_FLOAT_AUTO)
- {
- int e_flags = elf_elfheader (info.abfd)->e_flags;
-
- switch (e_flags & (EF_ARM_SOFT_FLOAT | EF_ARM_VFP_FLOAT))
- {
- case 0:
- /* Leave it as "auto". Strictly speaking this case
- means FPA, but almost nobody uses that now, and
- many toolchains fail to set the appropriate bits
- for the floating-point model they use. */
- break;
- case EF_ARM_SOFT_FLOAT:
- fp_model = ARM_FLOAT_SOFT_FPA;
- break;
- case EF_ARM_VFP_FLOAT:
- fp_model = ARM_FLOAT_VFP;
- break;
- case EF_ARM_SOFT_FLOAT | EF_ARM_VFP_FLOAT:
- fp_model = ARM_FLOAT_SOFT_VFP;
- break;
- }
- }
-
- if (e_flags & EF_ARM_BE8)
- info.byte_order_for_code = BFD_ENDIAN_LITTLE;
-
- break;
-
- default:
- /* Leave it as "auto". */
- break;
- }
- }
-
/* If there is already a candidate, use it. */
for (best_arch = gdbarch_list_lookup_by_info (arches, &info);
best_arch != NULL;
since gdbarches with a different target description are
automatically disqualified. */
+ /* Do check is_m, though, since it might come from the binary. */
+ if (is_m != gdbarch_tdep (best_arch->gdbarch)->is_m)
+ continue;
+
/* Found a match. */
break;
}
These are gdbarch discriminators, like the OSABI. */
tdep->arm_abi = arm_abi;
tdep->fp_model = fp_model;
+ tdep->is_m = is_m;
tdep->have_fpa_registers = have_fpa_registers;
tdep->have_vfp_registers = have_vfp_registers;
tdep->have_vfp_pseudos = have_vfp_pseudos;
{
set_tdesc_pseudo_register_name (gdbarch, arm_register_name);
- tdesc_use_registers (gdbarch, info.target_desc, tdesc_data);
+ tdesc_use_registers (gdbarch, tdesc, tdesc_data);
/* Override tdesc_register_type to adjust the types of VFP
registers for NEON. */
bfd_target_elf_flavour,
arm_elf_osabi_sniffer);
+ /* Initialize the standard target descriptions. */
+ initialize_tdesc_arm_with_m ();
+
/* Get the number of possible sets of register names defined in opcodes. */
num_disassembly_options = get_arm_regname_num_options ();
projects / binutils-gdb.git / blobdiff