#include "ctype.h"
#include "command.h"
#include "inferior.h"
+#include "thread.h"
#include "target.h"
#include "language.h"
#include <string.h>
static void
watch_command PARAMS ((char *, int));
+static int
+can_use_hardware_watchpoint PARAMS ((struct breakpoint *));
+
static void
tbreak_command PARAMS ((char *, int));
static void
set_breakpoint_count PARAMS ((int));
+static int
+remove_breakpoint PARAMS ((struct breakpoint *));
extern int addressprint; /* Print machine addresses? */
extern int demangle; /* Print de-mangled symbol names? */
b? (tmp=b->next, 1): 0; \
b = tmp)
+/* By default no support for hardware watchpoints is assumed. */
+#ifndef TARGET_CAN_USE_HARDWARE_WATCHPOINT
+#define TARGET_CAN_USE_HARDWARE_WATCHPOINT(B) 0
+#define target_remove_watchpoint(ADDR,LEN) -1
+#define target_insert_watchpoint(ADDR,LEN) -1
+#endif
+
/* Chain of all breakpoints defined. */
-struct breakpoint *breakpoint_chain;
+static struct breakpoint *breakpoint_chain;
/* Number of last breakpoint made. */
/* Flag indicating extra verbosity for xgdb. */
extern int xgdb_verbose;
+
+static void
+breakpoints_changed ()
+{
+ if (annotation_level > 1)
+ {
+ target_terminal_ours ();
+ printf_unfiltered ("\n\032\032breakpoints-invalid\n");
+ }
+}
\f
/* *PP is a string denoting a breakpoint. Get the number of the breakpoint.
Advance *PP after the string and any trailing whitespace.
to pass to lookup_internalvar(). */
char *varname;
char *start = ++p;
- value val;
+ value_ptr val;
while (isalnum (*p) || *p == '_')
p++;
l = read_command_lines ();
free_command_lines (&b->commands);
b->commands = l;
+ breakpoints_changed ();
return;
}
error ("No breakpoint number %d.", bnum);
struct breakpoint *b;
if (memory_breakpoint_size < 0)
- /* No breakpoints on this machine. */
+ /* No breakpoints on this machine. FIXME: This should be
+ dependent on the debugging target. Probably want
+ target_insert_breakpoint to return a size, saying how many
+ bytes of the shadow contents are used, or perhaps have
+ something like target_xfer_shadow. */
return target_read_memory (memaddr, myaddr, len);
ALL_BREAKPOINTS (b)
{
- if (b->type == bp_watchpoint || !b->inserted)
+ if (b->type == bp_watchpoint
+ || b->type == bp_hardware_watchpoint
+ || !b->inserted)
continue;
else if (b->address + memory_breakpoint_size <= memaddr)
/* The breakpoint is entirely before the chunk of memory
ALL_BREAKPOINTS (b)
if (b->type != bp_watchpoint
+ && b->type != bp_hardware_watchpoint
&& b->enable != disabled
&& ! b->inserted
&& ! b->duplicate)
b->enable = disabled;
if (!disabled_breaks)
{
- fprintf (stderr,
+ target_terminal_ours_for_output ();
+ fprintf_unfiltered (gdb_stderr,
"Cannot insert breakpoint %d:\n", b->number);
printf_filtered ("Disabling shared library breakpoints:\n");
}
else
#endif
{
- fprintf (stderr, "Cannot insert breakpoint %d:\n", b->number);
+ target_terminal_ours_for_output ();
+ fprintf_unfiltered (gdb_stderr, "Cannot insert breakpoint %d:\n", b->number);
#ifdef ONE_PROCESS_WRITETEXT
- fprintf (stderr,
+ fprintf_unfiltered (gdb_stderr,
"The same program may be running in another process.\n");
#endif
memory_error (val, b->address); /* which bombs us out */
else
b->inserted = 1;
}
+ else if (b->type == bp_hardware_watchpoint
+ && b->enable == enabled
+ && ! b->inserted
+ && ! b->duplicate)
+ {
+ FRAME saved_frame;
+ int saved_level, within_current_scope;
+ value_ptr mark = value_mark ();
+ value_ptr v;
+
+ /* Save the current frame and level so we can restore it after
+ evaluating the watchpoint expression on its own frame. */
+ saved_frame = selected_frame;
+ saved_level = selected_frame_level;
+
+ /* Determine if the watchpoint is within scope. */
+ if (b->exp_valid_block == NULL)
+ within_current_scope = 1;
+ else
+ {
+ FRAME fr = find_frame_addr_in_frame_chain (b->watchpoint_frame);
+ within_current_scope = (fr != NULL);
+ if (within_current_scope)
+ select_frame (fr, -1);
+ }
+
+ if (within_current_scope)
+ {
+ /* Evaluate the expression and cut the chain of values
+ produced off from the value chain. */
+ v = evaluate_expression (b->exp);
+ value_release_to_mark (mark);
+
+ b->val_chain = v;
+ b->inserted = 1;
+
+ /* Look at each value on the value chain. */
+ for ( ; v; v=v->next)
+ {
+ /* If it's a memory location, then we must watch it. */
+ if (v->lval == lval_memory)
+ {
+ int addr, len;
+
+ addr = VALUE_ADDRESS (v) + VALUE_OFFSET (v);
+ len = TYPE_LENGTH (VALUE_TYPE (v));
+ val = target_insert_watchpoint (addr, len);
+ if (val == -1)
+ {
+ b->inserted = 0;
+ break;
+ }
+ val = 0;
+ }
+ }
+ /* Failure to insert a watchpoint on any memory value in the
+ value chain brings us here. */
+ if (!b->inserted)
+ warning ("Hardware watchpoint %d: Could not insert watchpoint\n",
+ b->number);
+ }
+ else
+ {
+ printf_filtered ("\
+Hardware watchpoint %d deleted because the program has left the block in\n\
+which its expression is valid.\n", b->number);
+ if (b->related_breakpoint)
+ delete_breakpoint (b->related_breakpoint);
+ delete_breakpoint (b);
+ }
+
+ /* Restore the frame and level. */
+ select_frame (saved_frame, saved_level);
+ }
if (disabled_breaks)
printf_filtered ("\n");
return val;
}
+
int
remove_breakpoints ()
{
register struct breakpoint *b;
int val;
-#ifdef BREAKPOINT_DEBUG
- printf ("Removing breakpoints.\n");
-#endif /* BREAKPOINT_DEBUG */
-
ALL_BREAKPOINTS (b)
- if (b->type != bp_watchpoint && b->inserted)
- {
- val = target_remove_breakpoint(b->address, b->shadow_contents);
- if (val)
- return val;
- b->inserted = 0;
-#ifdef BREAKPOINT_DEBUG
- printf ("Removed breakpoint at %s",
- local_hex_string(b->address));
- printf (", shadow %s",
- local_hex_string(b->shadow_contents[0]));
- printf (", %s.\n",
- local_hex_string(b->shadow_contents[1]));
-#endif /* BREAKPOINT_DEBUG */
- }
+ {
+ if (b->inserted)
+ {
+ val = remove_breakpoint (b);
+ if (val != 0)
+ return val;
+ }
+ }
+ return 0;
+}
+
+static int
+remove_breakpoint (b)
+ struct breakpoint *b;
+{
+ int val;
+
+ if (b->type != bp_watchpoint
+ && b->type != bp_hardware_watchpoint)
+ {
+ val = target_remove_breakpoint(b->address, b->shadow_contents);
+ if (val)
+ return val;
+ b->inserted = 0;
+ }
+ else if (b->type == bp_hardware_watchpoint
+ && b->enable == enabled
+ && ! b->duplicate)
+ {
+ value_ptr v, n;
+
+ b->inserted = 0;
+ /* Walk down the saved value chain. */
+ for (v = b->val_chain; v; v = v->next)
+ {
+ /* For each memory reference remove the watchpoint
+ at that address. */
+ if (v->lval == lval_memory)
+ {
+ int addr, len;
+
+ addr = VALUE_ADDRESS (v) + VALUE_OFFSET (v);
+ len = TYPE_LENGTH (VALUE_TYPE (v));
+ val = target_remove_watchpoint (addr, len);
+ if (val == -1)
+ b->inserted = 1;
+ val = 0;
+ }
+ }
+ /* Failure to remove any of the hardware watchpoints comes here. */
+ if (b->inserted)
+ error ("Hardware watchpoint %d: Could not remove watchpoint\n",
+ b->number);
+
+ /* Free the saved value chain. We will construct a new one
+ the next time the watchpoint is inserted. */
+ for (v = b->val_chain; v; v = n)
+ {
+ n = v->next;
+ value_free (v);
+ }
+ b->val_chain = NULL;
+ }
return 0;
}
-/* Clear the "inserted" flag in all breakpoints.
- This is done when the inferior is loaded. */
+/* Clear the "inserted" flag in all breakpoints. */
void
mark_breakpoints_out ()
b->inserted = 0;
}
+/* Clear the "inserted" flag in all breakpoints and delete any breakpoints
+ which should go away between runs of the program. */
+
+void
+breakpoint_init_inferior ()
+{
+ register struct breakpoint *b, *temp;
+
+ ALL_BREAKPOINTS_SAFE (b, temp)
+ {
+ b->inserted = 0;
+
+ /* If the call dummy breakpoint is at the entry point it will
+ cause problems when the inferior is rerun, so we better
+ get rid of it. */
+ if (b->type == bp_call_dummy)
+ delete_breakpoint (b);
+
+ /* Likewise for scope breakpoints. */
+ if (b->type == bp_watchpoint_scope)
+ delete_breakpoint (b);
+
+ /* Likewise for watchpoints on local expressions. */
+ if ((b->type == bp_watchpoint || b->type == bp_hardware_watchpoint)
+ && b->exp_valid_block != NULL)
+ delete_breakpoint (b);
+ }
+}
+
/* breakpoint_here_p (PC) returns 1 if an enabled breakpoint exists at PC.
When continuing from a location with a breakpoint,
we actually single step once before calling insert_breakpoints. */
return 0;
}
+
+/* Return nonzero if FRAME is a dummy frame. We can't use PC_IN_CALL_DUMMY
+ because figuring out the saved SP would take too much time, at least using
+ get_saved_register on the 68k. This means that for this function to
+ work right a port must use the bp_call_dummy breakpoint. */
+
+int
+frame_in_dummy (frame)
+ FRAME frame;
+{
+ struct breakpoint *b;
+
+#ifdef CALL_DUMMY
+ ALL_BREAKPOINTS (b)
+ {
+ static unsigned LONGEST dummy[] = CALL_DUMMY;
+
+ if (b->type == bp_call_dummy
+ && b->frame == frame->frame
+
+ /* We need to check the PC as well as the frame on the sparc,
+ for signals.exp in the testsuite. */
+ && (frame->pc
+ >= (b->address
+ - sizeof (dummy) / sizeof (LONGEST) * REGISTER_SIZE))
+ && frame->pc <= b->address)
+ return 1;
+ }
+#endif /* CALL_DUMMY */
+ return 0;
+}
+
+/* breakpoint_match_thread (PC, PID) returns true if the breakpoint at PC
+ is valid for process/thread PID. */
+
+int
+breakpoint_thread_match (pc, pid)
+ CORE_ADDR pc;
+ int pid;
+{
+ struct breakpoint *b;
+ int thread;
+
+ thread = pid_to_thread_id (pid);
+
+ ALL_BREAKPOINTS (b)
+ if (b->enable != disabled
+ && b->address == pc
+ && (b->thread == -1 || b->thread == thread))
+ return 1;
+
+ return 0;
+}
+
\f
/* bpstat stuff. External routines' interfaces are documented
in breakpoint.h. */
{
bpstat p = NULL;
bpstat tmp;
- bpstat retval;
+ bpstat retval = NULL;
if (bs == NULL)
return bs;
which has since been deleted. */
if (bs->breakpoint_at == NULL
|| (bs->breakpoint_at->type != bp_breakpoint
- && bs->breakpoint_at->type != bp_watchpoint))
+ && bs->breakpoint_at->type != bp_watchpoint
+ && bs->breakpoint_at->type != bp_hardware_watchpoint))
return 0;
if (bs->breakpoint_at->type == bp_breakpoint)
if (bs->old_val != NULL)
{
printf_filtered ("\nWatchpoint %d, ", bs->breakpoint_at->number);
- print_expression (bs->breakpoint_at->exp, stdout);
+ print_expression (bs->breakpoint_at->exp, gdb_stdout);
printf_filtered ("\nOld value = ");
- value_print (bs->old_val, stdout, 0, Val_pretty_default);
+ value_print (bs->old_val, gdb_stdout, 0, Val_pretty_default);
printf_filtered ("\nNew value = ");
- value_print (bs->breakpoint_at->val, stdout, 0,
+ value_print (bs->breakpoint_at->val, gdb_stdout, 0,
Val_pretty_default);
printf_filtered ("\n");
value_free (bs->old_val);
bs->old_val = NULL;
- return 0;
+ /* More than one watchpoint may have been triggered. */
+ return -1;
}
/* We can't deal with it. Maybe another member of the bpstat chain can. */
return -1;
bs->print_it = print_it_normal;
return bs;
}
+\f
+
/* Possible return values for watchpoint_check (this can't be an enum
because of check_errors). */
-/* The watchpoint has been disabled. */
-#define WP_DISABLED 1
+/* The watchpoint has been deleted. */
+#define WP_DELETED 1
/* The value has changed. */
#define WP_VALUE_CHANGED 2
/* The value has not changed. */
/* Check watchpoint condition. */
static int
watchpoint_check (p)
- PTR p;
+ char *p;
{
bpstat bs = (bpstat) p;
+ struct breakpoint *b;
+ FRAME saved_frame, fr;
+ int within_current_scope, saved_level;
- int within_current_scope;
- if (bs->breakpoint_at->exp_valid_block != NULL)
- within_current_scope =
- contained_in (get_selected_block (), bs->breakpoint_at->exp_valid_block);
- else
- within_current_scope = 1;
+ /* Save the current frame and level so we can restore it after
+ evaluating the watchpoint expression on its own frame. */
+ saved_frame = selected_frame;
+ saved_level = selected_frame_level;
+ if (bs->breakpoint_at->exp_valid_block == NULL)
+ within_current_scope = 1;
+ else
+ {
+ fr = find_frame_addr_in_frame_chain (bs->breakpoint_at->watchpoint_frame);
+ within_current_scope = (fr != NULL);
+ if (within_current_scope)
+ /* If we end up stopping, the current frame will get selected
+ in normal_stop. So this call to select_frame won't affect
+ the user. */
+ select_frame (fr, -1);
+ }
+
if (within_current_scope)
{
/* We use value_{,free_to_}mark because it could be a
*long* time before we return to the command level and
- call free_all_values. */
- /* But couldn't we just call free_all_values instead? */
+ call free_all_values. We can't call free_all_values because
+ we might be in the middle of evaluating a function call. */
- value mark = value_mark ();
- value new_val = evaluate_expression (bs->breakpoint_at->exp);
+ value_ptr mark = value_mark ();
+ value_ptr new_val = evaluate_expression (bs->breakpoint_at->exp);
if (!value_equal (bs->breakpoint_at->val, new_val))
{
release_value (new_val);
bs->old_val = bs->breakpoint_at->val;
bs->breakpoint_at->val = new_val;
/* We will stop here */
+ select_frame (saved_frame, saved_level);
return WP_VALUE_CHANGED;
}
else
/* Nothing changed, don't do anything. */
value_free_to_mark (mark);
/* We won't stop here */
+ select_frame (saved_frame, saved_level);
return WP_VALUE_NOT_CHANGED;
}
}
So we can't even detect the first assignment to it and
watch after that (since the garbage may or may not equal
the first value assigned). */
- bs->breakpoint_at->enable = disabled;
printf_filtered ("\
-Watchpoint %d disabled because the program has left the block in\n\
+Watchpoint %d deleted because the program has left the block in\n\
which its expression is valid.\n", bs->breakpoint_at->number);
- return WP_DISABLED;
+ if (bs->breakpoint_at->related_breakpoint)
+ delete_breakpoint (bs->breakpoint_at->related_breakpoint);
+ delete_breakpoint (bs->breakpoint_at);
+
+ select_frame (saved_frame, saved_level);
+ return WP_DELETED;
}
}
return -1;
}
+/* Get a bpstat associated with having just stopped at address *PC
+ and frame address FRAME_ADDRESS. Update *PC to point at the
+ breakpoint (if we hit a breakpoint). NOT_A_BREAKPOINT is nonzero
+ if this is known to not be a real breakpoint (it could still be a
+ watchpoint, though). */
+
/* Determine whether we stopped at a breakpoint, etc, or whether we
don't understand this stop. Result is a chain of bpstat's such that:
if we don't understand the stop, the result is a null pointer.
- if we understand why we stopped, the result is not null, and
- the first element of the chain contains summary "stop" and
- "print" flags for the whole chain.
+ if we understand why we stopped, the result is not null.
Each element of the chain refers to a particular breakpoint or
watchpoint at which we have stopped. (We may have stopped for
*/
-
bpstat
-bpstat_stop_status (pc, frame_address)
+bpstat_stop_status (pc, frame_address, not_a_breakpoint)
CORE_ADDR *pc;
FRAME_ADDR frame_address;
+ int not_a_breakpoint;
{
register struct breakpoint *b;
CORE_ADDR bp_addr;
if (b->enable == disabled)
continue;
- if (b->type != bp_watchpoint && b->address != bp_addr)
+ if (b->type != bp_watchpoint
+ && b->type != bp_hardware_watchpoint
+ && b->address != bp_addr)
+ continue;
+
+ if (b->type != bp_watchpoint
+ && b->type != bp_hardware_watchpoint
+ && not_a_breakpoint)
continue;
/* Come here if it's a watchpoint, or if the break address matches */
bs->stop = 1;
bs->print = 1;
- if (b->type == bp_watchpoint)
+ if (b->type == bp_watchpoint || b->type == bp_hardware_watchpoint)
{
static char message1[] =
"Error evaluating expression for watchpoint %d\n";
char message[sizeof (message1) + 30 /* slop */];
sprintf (message, message1, b->number);
- switch (catch_errors (watchpoint_check, (char *) bs, message))
+ switch (catch_errors (watchpoint_check, (char *) bs, message,
+ RETURN_MASK_ALL))
{
- case WP_DISABLED:
+ case WP_DELETED:
/* We've already printed what needs to be printed. */
bs->print_it = print_it_done;
/* Stop. */
/* FALLTHROUGH */
case 0:
/* Error from catch_errors. */
- b->enable = disabled;
- printf_filtered ("Watchpoint %d disabled.\n", b->number);
+ printf_filtered ("Watchpoint %d deleted.\n", b->number);
+ if (b->related_breakpoint)
+ delete_breakpoint (b->related_breakpoint);
+ delete_breakpoint (b);
/* We've already printed what needs to be printed. */
bs->print_it = print_it_done;
+
/* Stop. */
break;
}
bs->stop = 0;
else
{
- int value_is_zero;
+ int value_is_zero = 0;
if (b->cond)
{
select_frame (get_current_frame (), 0);
value_is_zero
= catch_errors (breakpoint_cond_eval, (char *)(b->cond),
- "Error in testing breakpoint condition:\n");
+ "Error in testing breakpoint condition:\n",
+ RETURN_MASK_ALL);
/* FIXME-someday, should give breakpoint # */
free_all_values ();
}
{
*pc = bp_addr;
#if defined (SHIFT_INST_REGS)
- {
- CORE_ADDR pc = read_register (PC_REGNUM);
- CORE_ADDR npc = read_register (NPC_REGNUM);
- if (pc != npc)
- {
- write_register (NNPC_REGNUM, npc);
- write_register (NPC_REGNUM, pc);
- }
- }
+ SHIFT_INST_REGS();
#else /* No SHIFT_INST_REGS. */
write_pc (bp_addr);
#endif /* No SHIFT_INST_REGS. */
}
}
#endif /* DECR_PC_AFTER_BREAK != 0. */
+
+ /* The value of a hardware watchpoint hasn't changed, but the
+ intermediate memory locations we are watching may have. */
+ if (bs && ! bs->stop
+ && bs->breakpoint_at->type == bp_hardware_watchpoint)
+ {
+ remove_breakpoints ();
+ insert_breakpoints ();
+ }
return bs;
}
\f
/* Tell what to do about this bpstat. */
-enum bpstat_what
+struct bpstat_what
bpstat_what (bs)
bpstat bs;
{
/* Classify each bpstat as one of the following. */
enum class {
- /* There was a watchpoint, but we're not stopping. */
- wp_nostop = 0,
+ /* This bpstat element has no effect on the main_action. */
+ no_effect = 0,
/* There was a watchpoint, stop but don't print. */
wp_silent,
/* We hit the longjmp_resume breakpoint. */
long_resume,
+ /* We hit the step_resume breakpoint. */
+ step_resume,
+
+ /* We hit the through_sigtramp breakpoint. */
+ through_sig,
+
/* This is just used to count how many enums there are. */
class_last
};
#define setlr BPSTAT_WHAT_SET_LONGJMP_RESUME
#define clrlr BPSTAT_WHAT_CLEAR_LONGJMP_RESUME
#define clrlrs BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE
+#define sr BPSTAT_WHAT_STEP_RESUME
+#define ts BPSTAT_WHAT_THROUGH_SIGTRAMP
+
/* "Can't happen." Might want to print an error message.
abort() is not out of the question, but chances are GDB is just
a bit confused, not unusable. */
#define err BPSTAT_WHAT_STOP_NOISY
/* Given an old action and a class, come up with a new action. */
- static const enum bpstat_what
+ /* One interesting property of this table is that wp_silent is the same
+ as bp_silent and wp_noisy is the same as bp_noisy. That is because
+ after stopping, the check for whether to step over a breakpoint
+ (BPSTAT_WHAT_SINGLE type stuff) is handled in proceed() without
+ reference to how we stopped. We retain separate wp_silent and bp_silent
+ codes in case we want to change that someday. */
+
+ /* step_resume entries: a step resume breakpoint overrides another
+ breakpoint of signal handling (see comment in wait_for_inferior
+ at first IN_SIGTRAMP where we set the step_resume breakpoint). */
+ /* We handle the through_sigtramp_breakpoint the same way; having both
+ one of those and a step_resume_breakpoint is probably very rare (?). */
+
+ static const enum bpstat_what_main_action
table[(int)class_last][(int)BPSTAT_WHAT_LAST] =
{
/* old action */
- /* keep_c stop_s stop_n single setlr clrlr clrlrs */
-
-/*wp_nostop*/ {keep_c, stop_s, stop_n, single, setlr , clrlr , clrlrs},
-/*wp_silent*/ {stop_s, stop_s, stop_n, stop_s, stop_s, stop_s, stop_s},
-/*wp_noisy*/ {stop_n, stop_n, stop_n, stop_n, stop_n, stop_n, stop_n},
-/*bp_nostop*/ {single, stop_s, stop_n, single, setlr , clrlrs, clrlrs},
-/*bp_silent*/ {stop_s, stop_s, stop_n, stop_s, stop_s, stop_s, stop_s},
-/*bp_noisy*/ {stop_n, stop_n, stop_n, stop_n, stop_n, stop_n, stop_n},
-/*long_jump*/ {setlr , stop_s, stop_n, setlr , err , err , err },
-/*long_resume*/ {clrlr , stop_s, stop_n, clrlrs, err , err , err }
+ /* keep_c stop_s stop_n single setlr clrlr clrlrs sr ts
+ */
+/*no_effect*/ {keep_c,stop_s,stop_n,single, setlr , clrlr , clrlrs, sr, ts},
+/*wp_silent*/ {stop_s,stop_s,stop_n,stop_s, stop_s, stop_s, stop_s, sr, ts},
+/*wp_noisy*/ {stop_n,stop_n,stop_n,stop_n, stop_n, stop_n, stop_n, sr, ts},
+/*bp_nostop*/ {single,stop_s,stop_n,single, setlr , clrlrs, clrlrs, sr, ts},
+/*bp_silent*/ {stop_s,stop_s,stop_n,stop_s, stop_s, stop_s, stop_s, sr, ts},
+/*bp_noisy*/ {stop_n,stop_n,stop_n,stop_n, stop_n, stop_n, stop_n, sr, ts},
+/*long_jump*/ {setlr ,stop_s,stop_n,setlr , err , err , err , sr, ts},
+/*long_resume*/ {clrlr ,stop_s,stop_n,clrlrs, err , err , err , sr, ts},
+/*step_resume*/ {sr ,sr ,sr ,sr , sr , sr , sr , sr, ts},
+/*through_sig*/ {ts ,ts ,ts ,ts , ts , ts , ts , ts, ts}
};
#undef keep_c
#undef stop_s
#undef clrlr
#undef clrlrs
#undef err
- enum bpstat_what current_action = BPSTAT_WHAT_KEEP_CHECKING;
+#undef sr
+#undef ts
+ enum bpstat_what_main_action current_action = BPSTAT_WHAT_KEEP_CHECKING;
+ struct bpstat_what retval;
+ retval.call_dummy = 0;
for (; bs != NULL; bs = bs->next)
{
- enum class bs_class;
+ enum class bs_class = no_effect;
if (bs->breakpoint_at == NULL)
/* I suspect this can happen if it was a momentary breakpoint
which has since been deleted. */
bs_class = bp_nostop;
break;
case bp_watchpoint:
+ case bp_hardware_watchpoint:
if (bs->stop)
{
if (bs->print)
bs_class = wp_silent;
}
else
- bs_class = wp_nostop;
+ /* There was a watchpoint, but we're not stopping. This requires
+ no further action. */
+ bs_class = no_effect;
break;
case bp_longjmp:
bs_class = long_jump;
case bp_longjmp_resume:
bs_class = long_resume;
break;
+ case bp_step_resume:
+ if (bs->stop)
+ {
+ bs_class = step_resume;
+ }
+ else
+ /* It is for the wrong frame. */
+ bs_class = bp_nostop;
+ break;
+ case bp_through_sigtramp:
+ bs_class = through_sig;
+ break;
+ case bp_watchpoint_scope:
+ bs_class = bp_nostop;
+ break;
+
+ case bp_call_dummy:
+ /* Make sure the action is stop (silent or noisy), so infrun.c
+ pops the dummy frame. */
+ bs_class = bp_silent;
+ retval.call_dummy = 1;
+ break;
}
current_action = table[(int)bs_class][(int)current_action];
}
- return current_action;
+ retval.main_action = current_action;
+ return retval;
}
/* Nonzero if we should step constantly (e.g. watchpoints on machines
CORE_ADDR last_addr = (CORE_ADDR)-1;
int found_a_breakpoint = 0;
static char *bptypes[] = {"breakpoint", "until", "finish", "watchpoint",
- "longjmp", "longjmp resume"};
+ "hardware watchpoint", "longjmp",
+ "longjmp resume", "step resume",
+ "watchpoint scope", "call dummy" };
static char *bpdisps[] = {"del", "dis", "keep"};
static char bpenables[] = "ny";
char wrap_indent[80];
- if (!breakpoint_chain)
- {
- printf_filtered ("No breakpoints or watchpoints.\n");
- return;
- }
-
ALL_BREAKPOINTS (b)
if (bnum == -1
|| bnum == b->number)
/* We only print out user settable breakpoints unless the allflag is set. */
if (!allflag
&& b->type != bp_breakpoint
- && b->type != bp_watchpoint)
+ && b->type != bp_watchpoint
+ && b->type != bp_hardware_watchpoint)
continue;
if (!found_a_breakpoint++)
- printf_filtered ("Num Type Disp Enb %sWhat\n",
- addressprint ? "Address " : "");
-
- printf_filtered ("%-3d %-14s %-4s %-3c ",
- b->number,
- bptypes[(int)b->type],
- bpdisps[(int)b->disposition],
- bpenables[(int)b->enable]);
+ {
+ if (annotation_level > 1)
+ printf_filtered ("\n\032\032breakpoints-headers\n");
+
+ if (annotation_level > 1)
+ printf_filtered ("\n\032\032field 0\n");
+ printf_filtered ("Num ");
+ if (annotation_level > 1)
+ printf_filtered ("\n\032\032field 1\n");
+ printf_filtered ("Type ");
+ if (annotation_level > 1)
+ printf_filtered ("\n\032\032field 2\n");
+ printf_filtered ("Disp ");
+ if (annotation_level > 1)
+ printf_filtered ("\n\032\032field 3\n");
+ printf_filtered ("Enb ");
+ if (addressprint)
+ {
+ if (annotation_level > 1)
+ printf_filtered ("\n\032\032field 4\n");
+ printf_filtered ("Address ");
+ }
+ if (annotation_level > 1)
+ printf_filtered ("\n\032\032field 5\n");
+ printf_filtered ("What\n");
+
+ if (annotation_level > 1)
+ printf_filtered ("\n\032\032breakpoints-table\n");
+ }
+
+ if (annotation_level > 1)
+ printf_filtered ("\n\032\032record\n\n\032\032field 0\n");
+ printf_filtered ("%-3d ", b->number);
+ if (annotation_level > 1)
+ printf_filtered ("\n\032\032field 1\n");
+ printf_filtered ("%-14s ", bptypes[(int)b->type]);
+ if (annotation_level > 1)
+ printf_filtered ("\n\032\032field 2\n");
+ printf_filtered ("%-4s ", bpdisps[(int)b->disposition]);
+ if (annotation_level > 1)
+ printf_filtered ("\n\032\032field 3\n");
+ printf_filtered ("%-3c ", bpenables[(int)b->enable]);
+
strcpy (wrap_indent, " ");
if (addressprint)
strcat (wrap_indent, " ");
switch (b->type)
{
case bp_watchpoint:
- print_expression (b->exp, stdout);
+ case bp_hardware_watchpoint:
+ /* Field 4, the address, is omitted (which makes the columns
+ not line up too nicely with the headers, but the effect
+ is relatively readable). */
+ if (annotation_level > 1)
+ printf_filtered ("\n\032\032field 5\n");
+ print_expression (b->exp, gdb_stdout);
break;
+
case bp_breakpoint:
case bp_until:
case bp_finish:
case bp_longjmp:
case bp_longjmp_resume:
+ case bp_step_resume:
+ case bp_through_sigtramp:
+ case bp_watchpoint_scope:
+ case bp_call_dummy:
if (addressprint)
- printf_filtered ("%s ", local_hex_string_custom(b->address, "08"));
+ {
+ if (annotation_level > 1)
+ printf_filtered ("\n\032\032field 4\n");
+ /* FIXME-32x64: need a print_address_numeric with
+ field width */
+ printf_filtered
+ ("%s ",
+ local_hex_string_custom
+ ((unsigned long) b->address, "08l"));
+ }
+
+ if (annotation_level > 1)
+ printf_filtered ("\n\032\032field 5\n");
last_addr = b->address;
- if (b->symtab)
+ if (b->source_file)
{
sym = find_pc_function (b->address);
if (sym)
{
- fputs_filtered ("in ", stdout);
- fputs_filtered (SYMBOL_SOURCE_NAME (sym), stdout);
+ fputs_filtered ("in ", gdb_stdout);
+ fputs_filtered (SYMBOL_SOURCE_NAME (sym), gdb_stdout);
wrap_here (wrap_indent);
- fputs_filtered (" at ", stdout);
+ fputs_filtered (" at ", gdb_stdout);
}
- fputs_filtered (b->symtab->filename, stdout);
+ fputs_filtered (b->source_file, gdb_stdout);
printf_filtered (":%d", b->line_number);
}
else
- print_address_symbolic (b->address, stdout, demangle, " ");
+ print_address_symbolic (b->address, gdb_stdout, demangle, " ");
+ break;
}
printf_filtered ("\n");
if (b->frame)
- printf_filtered ("\tstop only in stack frame at %s\n",
- local_hex_string(b->frame));
+ {
+ if (annotation_level > 1)
+ printf_filtered ("\n\032\032field 6\n");
+
+ printf_filtered ("\tstop only in stack frame at ");
+ print_address_numeric (b->frame, gdb_stdout);
+ printf_filtered ("\n");
+ }
+
if (b->cond)
{
+ if (annotation_level > 1)
+ printf_filtered ("\n\032\032field 7\n");
+
printf_filtered ("\tstop only if ");
- print_expression (b->cond, stdout);
+ print_expression (b->cond, gdb_stdout);
printf_filtered ("\n");
}
+
if (b->ignore_count)
- printf_filtered ("\tignore next %d hits\n", b->ignore_count);
+ {
+ if (annotation_level > 1)
+ printf_filtered ("\n\032\032field 8\n");
+
+ printf_filtered ("\tignore next %d hits\n", b->ignore_count);
+ }
+
if ((l = b->commands))
- while (l)
- {
- fputs_filtered ("\t", stdout);
- fputs_filtered (l->line, stdout);
- fputs_filtered ("\n", stdout);
- l = l->next;
- }
+ {
+ if (annotation_level > 1)
+ printf_filtered ("\n\032\032field 9\n");
+
+ while (l)
+ {
+ fputs_filtered ("\t", gdb_stdout);
+ fputs_filtered (l->line, gdb_stdout);
+ fputs_filtered ("\n", gdb_stdout);
+ l = l->next;
+ }
+ }
}
- if (!found_a_breakpoint
- && bnum != -1)
- printf_filtered ("No breakpoint or watchpoint number %d.\n", bnum);
+ if (!found_a_breakpoint)
+ {
+ if (bnum == -1)
+ printf_filtered ("No breakpoints or watchpoints.\n");
+ else
+ printf_filtered ("No breakpoint or watchpoint number %d.\n", bnum);
+ }
else
/* Compare against (CORE_ADDR)-1 in case some compiler decides
that a comparison of an unsigned with -1 is always false. */
if (last_addr != (CORE_ADDR)-1)
set_next_address (last_addr);
+
+ if (annotation_level > 1)
+ printf_filtered ("\n\032\032breakpoints-table-end\n");
}
/* ARGSUSED */
others++;
if (others > 0)
{
- printf ("Note: breakpoint%s ", (others > 1) ? "s" : "");
+ printf_filtered ("Note: breakpoint%s ", (others > 1) ? "s" : "");
ALL_BREAKPOINTS (b)
if (b->address == pc)
{
others--;
- printf ("%d%s%s ",
- b->number,
- (b->enable == disabled) ? " (disabled)" : "",
- (others > 1) ? "," : ((others == 1) ? " and" : ""));
+ printf_filtered
+ ("%d%s%s ",
+ b->number,
+ (b->enable == disabled) ? " (disabled)" : "",
+ (others > 1) ? "," : ((others == 1) ? " and" : ""));
}
- printf ("also set at pc %s.\n", local_hex_string(pc));
+ printf_filtered ("also set at pc ");
+ print_address_numeric (pc, gdb_stdout);
+ printf_filtered (".\n");
}
}
\f
b = (struct breakpoint *) xmalloc (sizeof (struct breakpoint));
memset (b, 0, sizeof (*b));
b->address = sal.pc;
- b->symtab = sal.symtab;
+ if (sal.symtab == NULL)
+ b->source_file = NULL;
+ else
+ b->source_file = savestring (sal.symtab->filename,
+ strlen (sal.symtab->filename));
+ b->thread = -1;
b->line_number = sal.line;
b->enable = enabled;
b->next = 0;
}
check_duplicates (sal.pc);
+ breakpoints_changed ();
return b;
}
{
case bp_watchpoint:
printf_filtered ("Watchpoint %d: ", b->number);
- print_expression (b->exp, stdout);
+ print_expression (b->exp, gdb_stdout);
+ break;
+ case bp_hardware_watchpoint:
+ printf_filtered ("Hardware watchpoint %d: ", b->number);
+ print_expression (b->exp, gdb_stdout);
break;
case bp_breakpoint:
- printf_filtered ("Breakpoint %d at %s", b->number,
- local_hex_string(b->address));
- if (b->symtab)
+ printf_filtered ("Breakpoint %d at ", b->number);
+ print_address_numeric (b->address, gdb_stdout);
+ if (b->source_file)
printf_filtered (": file %s, line %d.",
- b->symtab->filename, b->line_number);
+ b->source_file, b->line_number);
break;
case bp_until:
case bp_finish:
case bp_longjmp:
case bp_longjmp_resume:
+ case bp_step_resume:
+ case bp_through_sigtramp:
+ case bp_call_dummy:
+ case bp_watchpoint_scope:
break;
}
printf_filtered ("\n");
/* Pointers in arg to the start, and one past the end, of the condition. */
char *cond_start = NULL;
- char *cond_end;
+ char *cond_end = NULL;
/* Pointers in arg to the start, and one past the end,
of the address part. */
char *addr_start = NULL;
- char *addr_end;
-
+ char *addr_end = NULL;
+ struct cleanup *old_chain;
+ struct cleanup *canonical_strings_chain = NULL;
+ char **canonical = (char **)NULL;
int i;
+ int thread;
sals.sals = NULL;
sals.nelts = 0;
&& (!current_source_symtab
|| (arg && (*arg == '+' || *arg == '-'))))
sals = decode_line_1 (&arg, 1, default_breakpoint_symtab,
- default_breakpoint_line);
+ default_breakpoint_line, &canonical);
else
- sals = decode_line_1 (&arg, 1, (struct symtab *)NULL, 0);
+ sals = decode_line_1 (&arg, 1, (struct symtab *)NULL, 0, &canonical);
addr_end = arg;
}
if (! sals.nelts)
return;
+ /* Make sure that all storage allocated in decode_line_1 gets freed in case
+ the following `for' loop errors out. */
+ old_chain = make_cleanup (free, sals.sals);
+ if (canonical != (char **)NULL)
+ {
+ make_cleanup (free, canonical);
+ canonical_strings_chain = make_cleanup (null_cleanup, 0);
+ for (i = 0; i < sals.nelts; i++)
+ {
+ if (canonical[i] != NULL)
+ make_cleanup (free, canonical[i]);
+ }
+ }
+
+ thread = -1; /* No specific thread yet */
+
/* Resolve all line numbers to PC's, and verify that conditions
can be parsed, before setting any breakpoints. */
for (i = 0; i < sals.nelts; i++)
{
+ char *tok, *end_tok;
+ int toklen;
+
resolve_sal_pc (&sals.sals[i]);
- while (arg && *arg)
+ tok = arg;
+
+ while (tok && *tok)
{
- if (arg[0] == 'i' && arg[1] == 'f'
- && (arg[2] == ' ' || arg[2] == '\t'))
+ while (*tok == ' ' || *tok == '\t')
+ tok++;
+
+ end_tok = tok;
+
+ while (*end_tok != ' ' && *end_tok != '\t' && *end_tok != '\000')
+ end_tok++;
+
+ toklen = end_tok - tok;
+
+ if (toklen >= 1 && strncmp (tok, "if", toklen) == 0)
+ {
+ tok = cond_start = end_tok + 1;
+ cond = parse_exp_1 (&tok, block_for_pc (sals.sals[i].pc), 0);
+ cond_end = tok;
+ }
+ else if (toklen >= 1 && strncmp (tok, "thread", toklen) == 0)
{
- arg += 2;
- cond_start = arg;
- cond = parse_exp_1 (&arg, block_for_pc (sals.sals[i].pc), 0);
- cond_end = arg;
+ char *tmptok;
+
+ tok = end_tok + 1;
+ tmptok = tok;
+ thread = strtol (tok, &tok, 0);
+ if (tok == tmptok)
+ error ("Junk after thread keyword.");
+ if (!valid_thread_id (thread))
+ error ("Unknown thread %d\n", thread);
}
else
error ("Junk at end of arguments.");
}
}
+ /* Remove the canonical strings from the cleanup, they are needed below. */
+ if (canonical != (char **)NULL)
+ discard_cleanups (canonical_strings_chain);
+
/* Now set all the breakpoints. */
for (i = 0; i < sals.nelts; i++)
{
b->number = breakpoint_count;
b->type = bp_breakpoint;
b->cond = cond;
+ b->thread = thread;
- /* FIXME: We should add the filename if this is a static function
- and probably if it is a line number (the line numbers could
- have changed when we re-read symbols; possibly better to disable
- the breakpoint in that case). */
- if (addr_start)
+ /* If a canonical line spec is needed use that instead of the
+ command string. */
+ if (canonical != (char **)NULL && canonical[i] != NULL)
+ b->addr_string = canonical[i];
+ else if (addr_start)
b->addr_string = savestring (addr_start, addr_end - addr_start);
if (cond_start)
b->cond_string = savestring (cond_start, cond_end - cond_start);
if (sals.nelts > 1)
{
- printf ("Multiple breakpoints were set.\n");
- printf ("Use the \"delete\" command to delete unwanted breakpoints.\n");
+ printf_filtered ("Multiple breakpoints were set.\n");
+ printf_filtered ("Use the \"delete\" command to delete unwanted breakpoints.\n");
}
- free ((PTR)sals.sals);
+ do_cleanups (old_chain);
}
/* Helper function for break_command_1 and disassemble_command. */
struct expression *exp;
struct block *exp_valid_block;
struct value *val;
+ FRAME frame, prev_frame;
sal.pc = 0;
sal.symtab = NULL;
b = set_raw_breakpoint (sal);
set_breakpoint_count (breakpoint_count + 1);
b->number = breakpoint_count;
- b->type = bp_watchpoint;
b->disposition = donttouch;
b->exp = exp;
b->exp_valid_block = exp_valid_block;
b->cond = 0;
b->cond_string = NULL;
b->exp_string = savestring (arg, strlen (arg));
+
+ frame = block_innermost_frame (exp_valid_block);
+ if (frame)
+ {
+ prev_frame = get_prev_frame (frame);
+ b->watchpoint_frame = FRAME_FP (frame);
+ }
+ else
+ b->watchpoint_frame = (CORE_ADDR)0;
+
+ if (can_use_hardware_watchpoint (b))
+ b->type = bp_hardware_watchpoint;
+ else
+ b->type = bp_watchpoint;
+
+ /* If the expression is "local", then set up a "watchpoint scope"
+ breakpoint at the point where we've left the scope of the watchpoint
+ expression. */
+ if (innermost_block)
+ {
+ struct breakpoint *scope_breakpoint;
+ struct symtab_and_line scope_sal;
+
+ if (prev_frame)
+ {
+ scope_sal.pc = get_frame_pc (prev_frame);
+ scope_sal.symtab = NULL;
+ scope_sal.line = 0;
+
+ scope_breakpoint = set_raw_breakpoint (scope_sal);
+ set_breakpoint_count (breakpoint_count + 1);
+ scope_breakpoint->number = breakpoint_count;
+
+ scope_breakpoint->type = bp_watchpoint_scope;
+ scope_breakpoint->enable = enabled;
+
+ /* Automatically delete the breakpoint when it hits. */
+ scope_breakpoint->disposition = delete;
+
+ /* Only break in the proper frame (help with recursion). */
+ scope_breakpoint->frame = prev_frame->frame;
+
+ /* Set the address at which we will stop. */
+ scope_breakpoint->address = get_frame_pc (prev_frame);
+
+ /* The scope breakpoint is related to the watchpoint. We
+ will need to act on them together. */
+ b->related_breakpoint = scope_breakpoint;
+ }
+ }
+
mention (b);
}
+
+/* Return nonzero if the watchpoint described by B can be handled
+ completely in hardware. If the watchpoint can not be handled
+ in hardware return zero. */
+
+static int
+can_use_hardware_watchpoint (b)
+ struct breakpoint *b;
+{
+ value_ptr mark = value_mark ();
+ value_ptr v = evaluate_expression (b->exp);
+ int found_memory = 0;
+
+ /* Make sure all the intermediate values are in memory. Also make sure
+ we found at least one memory expression. Guards against watch 0x12345,
+ which is meaningless, but could cause errors if one tries to insert a
+ hardware watchpoint for the constant expression. */
+ for ( ; v != mark; v = v->next)
+ {
+ if (!(v->lval == lval_memory)
+ || v->lval == not_lval
+ || (v->lval != not_lval
+ && v->modifiable == 0))
+ return 0;
+ else
+ if (v->lval == lval_memory)
+ found_memory = 1;
+ }
+
+ /* The expression itself looks suitable for using a hardware
+ watchpoint, but give the target machine a chance to reject it. */
+ return found_memory && TARGET_CAN_USE_HARDWARE_WATCHPOINT (b);
+}
+
\f
/*
* Helper routine for the until_command routine in infcmd.c. Here
if (default_breakpoint_valid)
sals = decode_line_1 (&arg, 1, default_breakpoint_symtab,
- default_breakpoint_line);
+ default_breakpoint_line, (char ***)NULL);
else
- sals = decode_line_1 (&arg, 1, (struct symtab *)NULL, 0);
+ sals = decode_line_1 (&arg, 1, (struct symtab *)NULL, 0, (char ***)NULL);
if (sals.nelts != 1)
error ("Couldn't get information on specified line.");
make_cleanup(delete_breakpoint, breakpoint);
}
- proceed (-1, -1, 0);
+ proceed (-1, TARGET_SIGNAL_DEFAULT, 0);
do_cleanups(old_chain);
}
\f
goto win;
}
#endif
- printf ("No catch clause for exception %s.\n", p);
+ printf_unfiltered ("No catch clause for exception %s.\n", p);
#if 0
win:
#endif
else
{
/* Grab selected catch clauses. */
- error ("catch NAME not implemeneted");
+ error ("catch NAME not implemented");
#if 0
/* This isn't used; I don't know what it was for. */
sals = map_catch_names (arg, catch_breakpoint);
b->enable = enabled;
b->disposition = tempflag ? delete : donttouch;
- printf ("Breakpoint %d at %s", b->number, local_hex_string(b->address));
- if (b->symtab)
- printf (": file %s, line %d.", b->symtab->filename, b->line_number);
- printf ("\n");
+ mention (b);
}
if (sals.nelts > 1)
{
- printf ("Multiple breakpoints were set.\n");
- printf ("Use the \"delete\" command to delete unwanted breakpoints.\n");
+ printf_unfiltered ("Multiple breakpoints were set.\n");
+ printf_unfiltered ("Use the \"delete\" command to delete unwanted breakpoints.\n");
}
free ((PTR)sals.sals);
}
sal = sals.sals[i];
found = (struct breakpoint *) 0;
while (breakpoint_chain
- && (sal.pc ? breakpoint_chain->address == sal.pc
- : (breakpoint_chain->symtab == sal.symtab
+ && (sal.pc
+ ? breakpoint_chain->address == sal.pc
+ : (breakpoint_chain->source_file != NULL
+ && sal.symtab != NULL
+ && STREQ (breakpoint_chain->source_file,
+ sal.symtab->filename)
&& breakpoint_chain->line_number == sal.line)))
{
b1 = breakpoint_chain;
ALL_BREAKPOINTS (b)
while (b->next
&& b->next->type != bp_watchpoint
- && (sal.pc ? b->next->address == sal.pc
- : (b->next->symtab == sal.symtab
+ && b->next->type != bp_hardware_watchpoint
+ && (sal.pc
+ ? b->next->address == sal.pc
+ : (b->next->source_file != NULL
+ && sal.symtab != NULL
+ && STREQ (b->next->source_file, sal.symtab->filename)
&& b->next->line_number == sal.line)))
{
b1 = b->next;
}
if (found->next) from_tty = 1; /* Always report if deleted more than one */
- if (from_tty) printf ("Deleted breakpoint%s ", found->next ? "s" : "");
+ if (from_tty) printf_unfiltered ("Deleted breakpoint%s ", found->next ? "s" : "");
+ breakpoints_changed ();
while (found)
{
- if (from_tty) printf ("%d ", found->number);
+ if (from_tty) printf_unfiltered ("%d ", found->number);
b1 = found->next;
delete_breakpoint (found);
found = b1;
}
- if (from_tty) putchar ('\n');
+ if (from_tty) putchar_unfiltered ('\n');
}
free ((PTR)sals.sals);
}
bpstat bs;
{
for (; bs; bs = bs->next)
- if (bs->breakpoint_at && bs->breakpoint_at->disposition == delete)
+ if (bs->breakpoint_at && bs->breakpoint_at->disposition == delete
+ && bs->stop)
delete_breakpoint (bs->breakpoint_at);
}
register bpstat bs;
if (bpt->inserted)
- target_remove_breakpoint(bpt->address, bpt->shadow_contents);
-
+ remove_breakpoint (bpt);
+
if (breakpoint_chain == bpt)
breakpoint_chain = bpt->next;
}
check_duplicates (bpt->address);
+ /* If this breakpoint was inserted, and there is another breakpoint
+ at the same address, we need to insert the other breakpoint. */
+ if (bpt->inserted
+ && bpt->type != bp_hardware_watchpoint)
+ {
+ ALL_BREAKPOINTS (b)
+ if (b->address == bpt->address
+ && !b->duplicate
+ && b->enable != disabled)
+ {
+ int val;
+ val = target_insert_breakpoint (b->address, b->shadow_contents);
+ if (val != 0)
+ {
+ target_terminal_ours_for_output ();
+ fprintf_unfiltered (gdb_stderr, "Cannot insert breakpoint %d:\n", b->number);
+ memory_error (val, b->address); /* which bombs us out */
+ }
+ else
+ b->inserted = 1;
+ }
+ }
free_command_lines (&bpt->commands);
if (bpt->cond)
- free ((PTR)bpt->cond);
+ free (bpt->cond);
if (bpt->cond_string != NULL)
- free ((PTR)bpt->cond_string);
+ free (bpt->cond_string);
if (bpt->addr_string != NULL)
- free ((PTR)bpt->addr_string);
+ free (bpt->addr_string);
if (bpt->exp_string != NULL)
- free ((PTR)bpt->exp_string);
+ free (bpt->exp_string);
+ if (bpt->source_file != NULL)
+ free (bpt->source_file);
- if (xgdb_verbose && bpt->type == bp_breakpoint)
- printf ("breakpoint #%d deleted\n", bpt->number);
+ breakpoints_changed ();
/* Be sure no bpstat's are pointing at it after it's been freed. */
- /* FIXME, how can we find all bpstat's? We just check stop_bpstat for now. */
+ /* FIXME, how can we find all bpstat's?
+ We just check stop_bpstat for now. */
for (bs = stop_bpstat; bs; bs = bs->next)
if (bs->breakpoint_at == bpt)
bs->breakpoint_at = NULL;
b->enable = disabled;
s = b->addr_string;
- sals = decode_line_1 (&s, 1, (struct symtab *)NULL, 0);
+ sals = decode_line_1 (&s, 1, (struct symtab *)NULL, 0, (char ***)NULL);
for (i = 0; i < sals.nelts; i++)
{
resolve_sal_pc (&sals.sals[i]);
- if (b->symtab != sals.sals[i].symtab
- || b->line_number != sals.sals[i].line
- || b->address != sals.sals[i].pc)
+
+ /* Reparse conditions, they might contain references to the
+ old symtab. */
+ if (b->cond_string != NULL)
{
- b->symtab = sals.sals[i].symtab;
+ s = b->cond_string;
+ if (b->cond)
+ free ((PTR)b->cond);
+ b->cond = parse_exp_1 (&s, block_for_pc (sals.sals[i].pc), 0);
+ }
+
+ /* We need to re-set the breakpoint if the address changes...*/
+ if (b->address != sals.sals[i].pc
+ /* ...or new and old breakpoints both have source files, and
+ the source file name or the line number changes... */
+ || (b->source_file != NULL
+ && sals.sals[i].symtab != NULL
+ && (!STREQ (b->source_file, sals.sals[i].symtab->filename)
+ || b->line_number != sals.sals[i].line)
+ )
+ /* ...or we switch between having a source file and not having
+ one. */
+ || ((b->source_file == NULL) != (sals.sals[i].symtab == NULL))
+ )
+ {
+ if (b->source_file != NULL)
+ free (b->source_file);
+ if (sals.sals[i].symtab == NULL)
+ b->source_file = NULL;
+ else
+ b->source_file =
+ savestring (sals.sals[i].symtab->filename,
+ strlen (sals.sals[i].symtab->filename));
b->line_number = sals.sals[i].line;
b->address = sals.sals[i].pc;
-
- if (b->cond_string != NULL)
- {
- s = b->cond_string;
- if (b->cond)
- free ((PTR)b->cond);
- b->cond = parse_exp_1 (&s, block_for_pc (sals.sals[i].pc), 0);
- }
check_duplicates (b->address);
mention (b);
+
+ /* Might be better to do this just once per breakpoint_re_set,
+ rather than once for every breakpoint. */
+ breakpoints_changed ();
}
b->enable = save_enable; /* Restore it, this worked. */
}
break;
case bp_watchpoint:
+ case bp_hardware_watchpoint:
innermost_block = NULL;
/* The issue arises of what context to evaluate this in. The same
one as when it was set, but what does that mean when symbols have
case bp_finish:
case bp_longjmp:
case bp_longjmp_resume:
+ case bp_watchpoint_scope:
+ case bp_call_dummy:
delete_breakpoint (b);
break;
}
static char message1[] = "Error in re-setting breakpoint %d:\n";
char message[sizeof (message1) + 30 /* slop */];
- /* If we have no current source symtab, and we have any breakpoints,
- go through the work of making a source context. */
- if (current_source_symtab == NULL && breakpoint_chain != 0)
- {
- select_source_symtab (NULL);
- }
-
ALL_BREAKPOINTS_SAFE (b, temp)
{
sprintf (message, message1, b->number); /* Format possible error msg */
- catch_errors (breakpoint_re_set_one, (char *) b, message);
+ catch_errors (breakpoint_re_set_one, (char *) b, message,
+ RETURN_MASK_ALL);
}
create_longjmp_breakpoint("longjmp");
else
printf_filtered ("Will ignore next %d crossings of breakpoint %d.",
count, bptnum);
+ breakpoints_changed ();
return;
}
longest_to_int (value_as_long (parse_and_eval (p))),
from_tty);
printf_filtered ("\n");
+ breakpoints_changed ();
}
\f
/* Call FUNCTION on each of the breakpoints
ALL_BREAKPOINTS (b)
if (b->number == num)
{
+ struct breakpoint *related_breakpoint = b->related_breakpoint;
function (b);
+ if (related_breakpoint)
+ function (related_breakpoint);
goto win;
}
- printf ("No breakpoint number %d.\n", num);
+ printf_unfiltered ("No breakpoint number %d.\n", num);
win:
p = p1;
}
enable_breakpoint (bpt)
struct breakpoint *bpt;
{
+ FRAME save_selected_frame = NULL;
+ int save_selected_frame_level = -1;
+
bpt->enable = enabled;
- if (xgdb_verbose && bpt->type == bp_breakpoint)
- printf ("breakpoint #%d enabled\n", bpt->number);
+ breakpoints_changed ();
check_duplicates (bpt->address);
- if (bpt->type == bp_watchpoint)
+ if (bpt->type == bp_watchpoint || bpt->type == bp_hardware_watchpoint)
{
- if (bpt->exp_valid_block != NULL
- && !contained_in (get_selected_block (), bpt->exp_valid_block))
+ if (bpt->exp_valid_block != NULL)
{
- printf_filtered ("\
+ FRAME fr = find_frame_addr_in_frame_chain (bpt->watchpoint_frame);
+ if (fr == NULL)
+ {
+ printf_filtered ("\
Cannot enable watchpoint %d because the block in which its expression\n\
is valid is not currently in scope.\n", bpt->number);
- bpt->enable = disabled;
- return;
+ bpt->enable = disabled;
+ return;
+ }
+
+ save_selected_frame = selected_frame;
+ save_selected_frame_level = selected_frame_level;
+ select_frame (fr, -1);
}
value_free (bpt->val);
release_value (bpt->val);
if (VALUE_LAZY (bpt->val))
value_fetch_lazy (bpt->val);
+
+ if (save_selected_frame_level >= 0)
+ select_frame (save_selected_frame, save_selected_frame_level);
}
}
{
case bp_breakpoint:
case bp_watchpoint:
+ case bp_hardware_watchpoint:
enable_breakpoint (bpt);
default:
continue;
disable_breakpoint (bpt)
struct breakpoint *bpt;
{
+ /* Never disable a watchpoint scope breakpoint; we want to
+ hit them when we leave scope so we can delete both the
+ watchpoint and its scope breakpoint at that time. */
+ if (bpt->type == bp_watchpoint_scope)
+ return;
+
bpt->enable = disabled;
- if (xgdb_verbose && bpt->type == bp_breakpoint)
- printf_filtered ("breakpoint #%d disabled\n", bpt->number);
+ breakpoints_changed ();
check_duplicates (bpt->address);
}
{
case bp_breakpoint:
case bp_watchpoint:
+ case bp_hardware_watchpoint:
disable_breakpoint (bpt);
default:
continue;
bpt->disposition = disable;
check_duplicates (bpt->address);
+ breakpoints_changed ();
}
/* ARGSUSED */
bpt->disposition = delete;
check_duplicates (bpt->address);
+ breakpoints_changed ();
}
/* ARGSUSED */
error ("Empty line specification.");
if (default_breakpoint_valid)
sals = decode_line_1 (&string, funfirstline,
- default_breakpoint_symtab, default_breakpoint_line);
+ default_breakpoint_symtab, default_breakpoint_line,
+ (char ***)NULL);
else
- sals = decode_line_1 (&string, funfirstline, (struct symtab *)NULL, 0);
+ sals = decode_line_1 (&string, funfirstline,
+ (struct symtab *)NULL, 0, (char ***)NULL);
if (*string)
error ("Junk at end of line specification: %s", string);
return sals;
add_com ("tbreak", class_breakpoint, tbreak_command,
"Set a temporary breakpoint. Args like \"break\" command.\n\
-Like \"break\" except the breakpoint is only enabled temporarily,\n\
-so it will be disabled when hit. Equivalent to \"break\" followed\n\
-by using \"enable once\" on the breakpoint number.");
+Like \"break\" except the breakpoint is only temporary,\n\
+so it will be deleted when hit. Equivalent to \"break\" followed\n\
+by using \"enable delete\" on the breakpoint number.");
add_prefix_cmd ("enable", class_breakpoint, enable_command,
"Enable some breakpoints.\n\
add_cmd ("once", no_class, enable_once_command,
"Enable breakpoints for one hit. Give breakpoint numbers.\n\
-If a breakpoint is hit while enabled in this fashion, it becomes disabled.\n\
-See the \"tbreak\" command which sets a breakpoint and enables it once.",
+If a breakpoint is hit while enabled in this fashion, it becomes disabled.",
&enablebreaklist);
add_cmd ("delete", no_class, enable_delete_command,
add_cmd ("once", no_class, enable_once_command,
"Enable breakpoints for one hit. Give breakpoint numbers.\n\
-If a breakpoint is hit while enabled in this fashion, it becomes disabled.\n\
-See the \"tbreak\" command which sets a breakpoint and enables it once.",
+If a breakpoint is hit while enabled in this fashion, it becomes disabled.",
&enablelist);
add_prefix_cmd ("disable", class_breakpoint, disable_command,
projects / binutils-gdb.git / blobdiff