source line debug information.
@kindex finish
+@kindex fin @r{(@code{finish})}
@item finish
Continue running until just after function in the selected stack frame
-returns. Print the returned value (if any).
+returns. Print the returned value (if any). This command can be
+abbreviated as @code{fin}.
Contrast this with the @code{return} command (@pxref{Returning,
,Returning from a Function}).
@cindex machine instructions
@cindex listing machine instructions
@item disassemble
+@itemx disassemble /m
This specialized command dumps a range of memory as machine
-instructions. The default memory range is the function surrounding the
+instructions. It can also print mixed source+disassembly by specifying
+the @code{/m} modifier.
+The default memory range is the function surrounding the
program counter of the selected frame. A single argument to this
command is a program counter value; @value{GDBN} dumps the function
surrounding this value. Two arguments specify a range of addresses
End of assembler dump.
@end smallexample
+Here is an example showing mixed source+assembly for Intel x86:
+
+@smallexample
+(@value{GDBP}) disas /m main
+Dump of assembler code for function main:
+5 @{
+0x08048330 <main+0>: push %ebp
+0x08048331 <main+1>: mov %esp,%ebp
+0x08048333 <main+3>: sub $0x8,%esp
+0x08048336 <main+6>: and $0xfffffff0,%esp
+0x08048339 <main+9>: sub $0x10,%esp
+
+6 printf ("Hello.\n");
+0x0804833c <main+12>: movl $0x8048440,(%esp)
+0x08048343 <main+19>: call 0x8048284 <puts@@plt>
+
+7 return 0;
+8 @}
+0x08048348 <main+24>: mov $0x0,%eax
+0x0804834d <main+29>: leave
+0x0804834e <main+30>: ret
+
+End of assembler dump.
+@end smallexample
+
Some architectures have more than one commonly-used set of instruction
mnemonics or other syntax.
* Character Sets:: Debugging programs that use a different
character set than GDB does
* Caching Remote Data:: Data caching for remote targets
+* Searching Memory:: Searching memory for a sequence of bytes
@end menu
@node Expressions
the data cache operation.
@end table
+@node Searching Memory
+@section Search Memory
+@cindex searching memory
+
+Memory can be searched for a particular sequence of bytes with the
+@code{find} command.
+
+@table @code
+@kindex find
+@item find @r{[}/@var{sn}@r{]} @var{start_addr}, +@var{len}, @var{val1} @r{[}, @var{val2}, @dots{}@r{]}
+@itemx find @r{[}/@var{sn}@r{]} @var{start_addr}, @var{end_addr}, @var{val1} @r{[}, @var{val2}, @dots{}@r{]}
+Search memory for the sequence of bytes specified by @var{val1}, @var{val2},
+etc. The search begins at address @var{start_addr} and continues for either
+@var{len} bytes or through to @var{end_addr} inclusive.
+@end table
+
+@var{s} and @var{n} are optional parameters.
+They may be specified in either order, apart or together.
+
+@table @r
+@item @var{s}, search query size
+The size of each search query value.
+
+@table @code
+@item b
+bytes
+@item h
+halfwords (two bytes)
+@item w
+words (four bytes)
+@item g
+giant words (eight bytes)
+@end table
+
+All values are interpreted in the current language.
+This means, for example, that if the current source language is C/C@t{++}
+then searching for the string ``hello'' includes the trailing '\0'.
+
+If the value size is not specified, it is taken from the
+value's type in the current language.
+This is useful when one wants to specify the search
+pattern as a mixture of types.
+Note that this means, for example, that in the case of C-like languages
+a search for an untyped 0x42 will search for @samp{(int) 0x42}
+which is typically four bytes.
+
+@item @var{n}, maximum number of finds
+The maximum number of matches to print. The default is to print all finds.
+@end table
+
+You can use strings as search values. Quote them with double-quotes
+ (@code{"}).
+The string value is copied into the search pattern byte by byte,
+regardless of the endianness of the target and the size specification.
+
+The address of each match found is printed as well as a count of the
+number of matches found.
+
+The address of the last value found is stored in convenience variable
+@samp{$_}.
+A count of the number of matches is stored in @samp{$numfound}.
+
+For example, if stopped at the @code{printf} in this function:
+
+@smallexample
+void
+hello ()
+@{
+ static char hello[] = "hello-hello";
+ static struct @{ char c; short s; int i; @}
+ __attribute__ ((packed)) mixed
+ = @{ 'c', 0x1234, 0x87654321 @};
+ printf ("%s\n", hello);
+@}
+@end smallexample
+
+@noindent
+you get during debugging:
+
+@smallexample
+(gdb) find &hello[0], +sizeof(hello), "hello"
+0x804956d <hello.1620+6>
+1 pattern found
+(gdb) find &hello[0], +sizeof(hello), 'h', 'e', 'l', 'l', 'o'
+0x8049567 <hello.1620>
+0x804956d <hello.1620+6>
+2 patterns found
+(gdb) find /b1 &hello[0], +sizeof(hello), 'h', 0x65, 'l'
+0x8049567 <hello.1620>
+1 pattern found
+(gdb) find &mixed, +sizeof(mixed), (char) 'c', (short) 0x1234, (int) 0x87654321
+0x8049560 <mixed.1625>
+1 pattern found
+(gdb) print $numfound
+$1 = 1
+(gdb) print $_
+$2 = (void *) 0x8049560
+@end smallexample
@node Macros
@chapter C Preprocessor Macros
@tab @code{qGetTLSAddr}
@tab Displaying @code{__thread} variables
+@item @code{search-memory}
+@tab @code{qSearch:memory}
+@tab @code{find}
+
@item @code{supported-packets}
@tab @code{qSupported}
@tab Remote communications parameters
consequence of @sc{gdb/mi} commands (e.g., a breakpoint modified) or a result of
target activity (e.g., target stopped).
-The following is the list of possible async records
+The following is the list of possible async records:
@table @code
@end smallexample
-@subheading The @code{-target-file-put} Command
+@subheading The @code{-target-file-get} Command
@findex -target-file-get
@subsubheading Synopsis
Control whether to display the execution time for each command. If
set to a nonzero value, @value{GDBN} will display how much time it
took to execute each command, following the command's own output.
+The time is not printed for the commands that run the target, since
+there's no mechanism currently to compute how much time was spend
+by @value{GDBN} and how much time was spend by the program been debugged.
+it's not possibly currently
This can also be requested by invoking @value{GDBN} with the
@option{--statistics} command-line switch (@pxref{Mode Options}).
@item vAttach;@var{pid}
@cindex @samp{vAttach} packet
Attach to a new process with the specified process ID. @var{pid} is a
-hexadecimal integer identifying the process. If the stub is currently
-controlling a process, it is killed. The attached process is stopped.
+hexadecimal integer identifying the process. The attached process is
+stopped.
This packet is only available in extended mode (@pxref{extended mode}).
command line. The file and arguments are hex-encoded strings. If
@var{filename} is an empty string, the stub may use a default program
(e.g.@: the last program run). The program is created in the stopped
-state. If the stub is currently controlling a process, it is killed.
+state.
This packet is only available in extended mode (@pxref{extended mode}).
conventions above. Please don't use this packet as a model for new
packets.)
+@item qSearch:memory:@var{address};@var{length};@var{search-pattern}
+@cindex searching memory, in remote debugging
+@cindex @samp{qSearch:memory} packet
+@anchor{qSearch memory}
+Search @var{length} bytes at @var{address} for @var{search-pattern}.
+@var{address} and @var{length} are encoded in hex.
+@var{search-pattern} is a sequence of bytes, hex encoded.
+
+Reply:
+@table @samp
+@item 0
+The pattern was not found.
+@item 1,address
+The pattern was found at @var{address}.
+@item E @var{NN}
+A badly formed request or an error was encountered while searching memory.
+@item
+An empty reply indicates that @samp{qSearch:memory} is not recognized.
+@end table
+
@item qSupported @r{[}:@var{gdbfeature} @r{[};@var{gdbfeature}@r{]}@dots{} @r{]}
@cindex supported packets, remote query
@cindex features of the remote protocol
projects / binutils-gdb.git / blobdiff