/* Fork a Unix child process, and set up to debug it, for GDB.
- Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000,
- 2001, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
+ Copyright (C) 1990-2023 Free Software Foundation, Inc.
Contributed by Cygnus Support.
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
-#include "gdb_string.h"
-#include "frame.h" /* required by inferior.h */
#include "inferior.h"
-#include "target.h"
-#include "gdb_wait.h"
-#include "gdb_vfork.h"
-#include "gdbcore.h"
+#include "gdbcmd.h"
#include "terminal.h"
#include "gdbthread.h"
-#include "command.h" /* for dont_repeat () */
-#include "gdbcmd.h"
-#include "solib.h"
-
-#include <signal.h>
+#include "ui.h"
+#include "gdbsupport/job-control.h"
+#include "gdbsupport/filestuff.h"
+#include "nat/fork-inferior.h"
+#include "gdbsupport/common-inferior.h"
-/* This just gets used as a default if we can't find SHELL. */
-#define SHELL_FILE "/bin/sh"
+/* The exec-wrapper, if any, that will be used when starting the
+ inferior. */
-extern char **environ;
+static std::string exec_wrapper;
-static char *exec_wrapper;
+/* See gdbsupport/common-inferior.h. */
-/* Break up SCRATCH into an argument vector suitable for passing to
- execvp and store it in ARGV. E.g., on "run a b c d" this routine
- would get as input the string "a b c d", and as output it would
- fill in ARGV with the four arguments "a", "b", "c", "d". */
-
-static void
-breakup_args (char *scratch, char **argv)
+const char *
+get_exec_wrapper ()
{
- char *cp = scratch;
-
- for (;;)
- {
- /* Scan past leading separators */
- while (*cp == ' ' || *cp == '\t' || *cp == '\n')
- cp++;
-
- /* Break if at end of string. */
- if (*cp == '\0')
- break;
-
- /* Take an arg. */
- *argv++ = cp;
-
- /* Scan for next arg separator. */
- cp = strchr (cp, ' ');
- if (cp == NULL)
- cp = strchr (cp, '\t');
- if (cp == NULL)
- cp = strchr (cp, '\n');
-
- /* No separators => end of string => break. */
- if (cp == NULL)
- break;
-
- /* Replace the separator with a terminator. */
- *cp++ = '\0';
- }
-
- /* Null-terminate the vector. */
- *argv = NULL;
+ return !exec_wrapper.empty () ? exec_wrapper.c_str () : nullptr;
}
-/* When executing a command under the given shell, return non-zero if
- the '!' character should be escaped when embedded in a quoted
- command-line argument. */
+/* See nat/fork-inferior.h. */
-static int
-escape_bang_in_quoted_argument (const char *shell_file)
+void
+gdb_flush_out_err ()
{
- const int shell_file_len = strlen (shell_file);
+ gdb_flush (main_ui->m_gdb_stdout);
+ gdb_flush (main_ui->m_gdb_stderr);
+}
- /* Bang should be escaped only in C Shells. For now, simply check
- that the shell name ends with 'csh', which covers at least csh
- and tcsh. This should be good enough for now. */
+/* The ui structure that will be saved on 'prefork_hook' and
+ restored on 'postfork_hook'. */
+static struct ui *saved_ui = NULL;
- if (shell_file_len < 3)
- return 0;
+/* See nat/fork-inferior.h. */
- if (shell_file[shell_file_len - 3] == 'c'
- && shell_file[shell_file_len - 2] == 's'
- && shell_file[shell_file_len - 1] == 'h')
- return 1;
+void
+prefork_hook (const char *args)
+{
+ gdb_assert (saved_ui == NULL);
+ /* Retain a copy of our UI, since the child will replace this value
+ and if we're vforked, we have to restore it. */
+ saved_ui = current_ui;
- return 0;
+ /* Tell the terminal handling subsystem what tty we plan to run on;
+ it will just record the information for later. */
+ new_tty_prefork (current_inferior ()->tty ());
}
-/* Start an inferior Unix child process and sets inferior_ptid to its
- pid. EXEC_FILE is the file to run. ALLARGS is a string containing
- the arguments to the program. ENV is the environment vector to
- pass. SHELL_FILE is the shell file, or NULL if we should pick
- one. */
-
-/* This function is NOT reentrant. Some of the variables have been
- made static to ensure that they survive the vfork call. */
+/* See nat/fork-inferior.h. */
-int
-fork_inferior (char *exec_file_arg, char *allargs, char **env,
- void (*traceme_fun) (void), void (*init_trace_fun) (int),
- void (*pre_trace_fun) (void), char *shell_file_arg)
+void
+postfork_hook (pid_t pid)
{
- int pid;
- char *shell_command;
- static char default_shell_file[] = SHELL_FILE;
- int len;
- /* Set debug_fork then attach to the child while it sleeps, to debug. */
- static int debug_fork = 0;
- /* This is set to the result of setpgrp, which if vforked, will be visible
- to you in the parent process. It's only used by humans for debugging. */
- static int debug_setpgrp = 657473;
- static char *shell_file;
- static char *exec_file;
- char **save_our_env;
- int shell = 0;
- static char **argv;
- const char *inferior_io_terminal = get_inferior_io_terminal ();
-
- /* If no exec file handed to us, get it from the exec-file command
- -- with a good, common error message if none is specified. */
- exec_file = exec_file_arg;
- if (exec_file == 0)
- exec_file = get_exec_file (1);
-
- /* STARTUP_WITH_SHELL is defined in inferior.h. If 0,e we'll just
- do a fork/exec, no shell, so don't bother figuring out what
- shell. */
- shell_file = shell_file_arg;
- if (STARTUP_WITH_SHELL)
- {
- /* Figure out what shell to start up the user program under. */
- if (shell_file == NULL)
- shell_file = getenv ("SHELL");
- if (shell_file == NULL)
- shell_file = default_shell_file;
- shell = 1;
- }
+ inferior *inf = current_inferior ();
- /* Multiplying the length of exec_file by 4 is to account for the
- fact that it may expand when quoted; it is a worst-case number
- based on every character being '. */
- len = 5 + 4 * strlen (exec_file) + 1 + strlen (allargs) + 1 + /*slop */ 12;
- if (exec_wrapper)
- len += strlen (exec_wrapper) + 1;
+ inferior_appeared (inf, pid);
- shell_command = (char *) alloca (len);
- shell_command[0] = '\0';
+ gdb_assert (saved_ui != NULL);
+ current_ui = saved_ui;
+ saved_ui = NULL;
- if (!shell)
- {
- /* We're going to call execvp. Create argument vector.
- Calculate an upper bound on the length of the vector by
- assuming that every other character is a separate
- argument. */
- int argc = (strlen (allargs) + 1) / 2 + 2;
- argv = (char **) xmalloc (argc * sizeof (*argv));
- argv[0] = exec_file;
- breakup_args (allargs, &argv[1]);
- }
- else
- {
- /* We're going to call a shell. */
-
- char *p;
- int need_to_quote;
- const int escape_bang = escape_bang_in_quoted_argument (shell_file);
-
- strcat (shell_command, "exec ");
-
- /* Add any exec wrapper. That may be a program name with arguments, so
- the user must handle quoting. */
- if (exec_wrapper)
- {
- strcat (shell_command, exec_wrapper);
- strcat (shell_command, " ");
- }
-
- /* Now add exec_file, quoting as necessary. */
-
- /* Quoting in this style is said to work with all shells. But
- csh on IRIX 4.0.1 can't deal with it. So we only quote it if
- we need to. */
- p = exec_file;
- while (1)
- {
- switch (*p)
- {
- case '\'':
- case '!':
- case '"':
- case '(':
- case ')':
- case '$':
- case '&':
- case ';':
- case '<':
- case '>':
- case ' ':
- case '\n':
- case '\t':
- need_to_quote = 1;
- goto end_scan;
-
- case '\0':
- need_to_quote = 0;
- goto end_scan;
-
- default:
- break;
- }
- ++p;
- }
- end_scan:
- if (need_to_quote)
- {
- strcat (shell_command, "'");
- for (p = exec_file; *p != '\0'; ++p)
- {
- if (*p == '\'')
- strcat (shell_command, "'\\''");
- else if (*p == '!' && escape_bang)
- strcat (shell_command, "\\!");
- else
- strncat (shell_command, p, 1);
- }
- strcat (shell_command, "'");
- }
- else
- strcat (shell_command, exec_file);
-
- strcat (shell_command, " ");
- strcat (shell_command, allargs);
- }
+ new_tty_postfork ();
+}
- /* On some systems an exec will fail if the executable is open. */
- close_exec_file ();
+/* See nat/fork-inferior.h. */
- /* Retain a copy of our environment variables, since the child will
- replace the value of environ and if we're vforked, we have to
- restore it. */
- save_our_env = environ;
+void
+postfork_child_hook ()
+{
+ /* This is set to the result of setpgrp, which if vforked, will be
+ visible to you in the parent process. It's only used by humans
+ for debugging. */
+ static int debug_setpgrp = 657473;
- /* Tell the terminal handling subsystem what tty we plan to run on;
- it will just record the information for later. */
- new_tty_prefork (inferior_io_terminal);
-
- /* It is generally good practice to flush any possible pending stdio
- output prior to doing a fork, to avoid the possibility of both
- the parent and child flushing the same data after the fork. */
- gdb_flush (gdb_stdout);
- gdb_flush (gdb_stderr);
-
- /* If there's any initialization of the target layers that must
- happen to prepare to handle the child we're about fork, do it
- now... */
- if (pre_trace_fun != NULL)
- (*pre_trace_fun) ();
-
- /* Create the child process. Since the child process is going to
- exec(3) shortly afterwards, try to reduce the overhead by
- calling vfork(2). However, if PRE_TRACE_FUN is non-null, it's
- likely that this optimization won't work since there's too much
- work to do between the vfork(2) and the exec(3). This is known
- to be the case on ttrace(2)-based HP-UX, where some handshaking
- between parent and child needs to happen between fork(2) and
- exec(2). However, since the parent is suspended in the vforked
- state, this doesn't work. Also note that the vfork(2) call might
- actually be a call to fork(2) due to the fact that autoconf will
- ``#define vfork fork'' on certain platforms. */
- if (pre_trace_fun || debug_fork)
- pid = fork ();
- else
- pid = vfork ();
-
- if (pid < 0)
- perror_with_name (("vfork"));
-
- if (pid == 0)
+ /* Make sure we switch to main_ui here in order to be able to
+ use the gdb_printf/warning/error functions. */
+ current_ui = main_ui;
+
+ /* Create a new session for the inferior process, if necessary.
+ It will also place the inferior in a separate process group. */
+ if (create_tty_session () <= 0)
{
- if (debug_fork)
- sleep (debug_fork);
-
- /* Create a new session for the inferior process, if necessary.
- It will also place the inferior in a separate process group. */
- if (create_tty_session () <= 0)
- {
- /* No session was created, but we still want to run the inferior
- in a separate process group. */
- debug_setpgrp = gdb_setpgid ();
- if (debug_setpgrp == -1)
- perror ("setpgrp failed in child");
- }
-
- /* Ask the tty subsystem to switch to the one we specified
- earlier (or to share the current terminal, if none was
- specified). */
- new_tty ();
-
- /* Changing the signal handlers for the inferior after
- a vfork can also change them for the superior, so we don't mess
- with signals here. See comments in
- initialize_signals for how we get the right signal handlers
- for the inferior. */
-
- /* "Trace me, Dr. Memory!" */
- (*traceme_fun) ();
-
- /* The call above set this process (the "child") as debuggable
- by the original gdb process (the "parent"). Since processes
- (unlike people) can have only one parent, if you are debugging
- gdb itself (and your debugger is thus _already_ the
- controller/parent for this child), code from here on out is
- undebuggable. Indeed, you probably got an error message
- saying "not parent". Sorry; you'll have to use print
- statements! */
-
- /* There is no execlpe call, so we have to set the environment
- for our child in the global variable. If we've vforked, this
- clobbers the parent, but environ is restored a few lines down
- in the parent. By the way, yes we do need to look down the
- path to find $SHELL. Rich Pixley says so, and I agree. */
- environ = env;
-
- /* If we decided above to start up with a shell, we exec the
- shell, "-c" says to interpret the next arg as a shell command
- to execute, and this command is "exec <target-program>
- <args>". */
- if (shell)
- {
- execlp (shell_file, shell_file, "-c", shell_command, (char *) 0);
-
- /* If we get here, it's an error. */
- fprintf_unfiltered (gdb_stderr, "Cannot exec %s: %s.\n", shell_file,
- safe_strerror (errno));
- gdb_flush (gdb_stderr);
- _exit (0177);
- }
- else
- {
- /* Otherwise, we directly exec the target program with
- execvp. */
- int i;
- char *errstring;
-
- execvp (exec_file, argv);
-
- /* If we get here, it's an error. */
- errstring = safe_strerror (errno);
- fprintf_unfiltered (gdb_stderr, "Cannot exec %s ", exec_file);
-
- i = 1;
- while (argv[i] != NULL)
- {
- if (i != 1)
- fprintf_unfiltered (gdb_stderr, " ");
- fprintf_unfiltered (gdb_stderr, "%s", argv[i]);
- i++;
- }
- fprintf_unfiltered (gdb_stderr, ".\n");
-#if 0
- /* This extra info seems to be useless. */
- fprintf_unfiltered (gdb_stderr, "Got error %s.\n", errstring);
-#endif
- gdb_flush (gdb_stderr);
- _exit (0177);
- }
+ /* No session was created, but we still want to run the inferior
+ in a separate process group. */
+ debug_setpgrp = gdb_setpgid ();
+ if (debug_setpgrp == -1)
+ perror (_("setpgrp failed in child"));
}
- /* Restore our environment in case a vforked child clob'd it. */
- environ = save_our_env;
-
- init_thread_list ();
-
- add_inferior (pid);
-
- /* Needed for wait_for_inferior stuff below. */
- inferior_ptid = pid_to_ptid (pid);
-
- /* We have something that executes now. We'll be running through
- the shell at this point, but the pid shouldn't change. Targets
- supporting MT should fill this task's ptid with more data as soon
- as they can. */
- add_thread_silent (inferior_ptid);
-
- /* Now that we have a child process, make it our target, and
- initialize anything target-vector-specific that needs
- initializing. */
- if (init_trace_fun)
- (*init_trace_fun) (pid);
-
- /* We are now in the child process of interest, having exec'd the
- correct program, and are poised at the first instruction of the
- new program. */
- return pid;
+ /* Ask the tty subsystem to switch to the one we specified
+ earlier (or to share the current terminal, if none was
+ specified). */
+ new_tty ();
}
-/* Accept NTRAPS traps from the inferior. */
+/* See inferior.h. */
-void
-startup_inferior (int ntraps)
+ptid_t
+gdb_startup_inferior (pid_t pid, int num_traps)
{
- int pending_execs = ntraps;
- int terminal_initted = 0;
+ inferior *inf = current_inferior ();
+ process_stratum_target *proc_target = inf->process_target ();
- /* The process was started by the fork that created it, but it will
- have stopped one instruction after execing the shell. Here we
- must get it up to actual execution of the real program. */
+ scoped_restore save_starting_up
+ = make_scoped_restore (&inf->starting_up, true);
- if (exec_wrapper)
- pending_execs++;
-
- while (1)
- {
- int resume_signal = TARGET_SIGNAL_0;
- ptid_t resume_ptid;
- ptid_t event_ptid;
-
- struct target_waitstatus ws;
- memset (&ws, 0, sizeof (ws));
- event_ptid = target_wait (pid_to_ptid (-1), &ws);
-
- if (ws.kind == TARGET_WAITKIND_IGNORE)
- /* The inferior didn't really stop, keep waiting. */
- continue;
-
- switch (ws.kind)
- {
- case TARGET_WAITKIND_SPURIOUS:
- case TARGET_WAITKIND_LOADED:
- case TARGET_WAITKIND_FORKED:
- case TARGET_WAITKIND_VFORKED:
- case TARGET_WAITKIND_SYSCALL_ENTRY:
- case TARGET_WAITKIND_SYSCALL_RETURN:
- /* Ignore gracefully during startup of the inferior. */
- switch_to_thread (event_ptid);
- break;
-
- case TARGET_WAITKIND_SIGNALLED:
- target_terminal_ours ();
- target_mourn_inferior ();
- error (_("During startup program terminated with signal %s, %s."),
- target_signal_to_name (ws.value.sig),
- target_signal_to_string (ws.value.sig));
- return;
-
- case TARGET_WAITKIND_EXITED:
- target_terminal_ours ();
- target_mourn_inferior ();
- if (ws.value.integer)
- error (_("During startup program exited with code %d."),
- ws.value.integer);
- else
- error (_("During startup program exited normally."));
- return;
-
- case TARGET_WAITKIND_EXECD:
- /* Handle EXEC signals as if they were SIGTRAP signals. */
- xfree (ws.value.execd_pathname);
- resume_signal = TARGET_SIGNAL_TRAP;
- switch_to_thread (event_ptid);
- break;
-
- case TARGET_WAITKIND_STOPPED:
- resume_signal = ws.value.sig;
- switch_to_thread (event_ptid);
- break;
- }
-
- /* In all-stop mode, resume all threads. */
- if (!non_stop)
- resume_ptid = pid_to_ptid (-1);
- else
- resume_ptid = event_ptid;
-
- if (resume_signal != TARGET_SIGNAL_TRAP)
- {
- /* Let shell child handle its own signals in its own way. */
- target_resume (resume_ptid, 0, resume_signal);
- }
- else
- {
- /* We handle SIGTRAP, however; it means child did an exec. */
- if (!terminal_initted)
- {
- /* Now that the child has exec'd we know it has already
- set its process group. On POSIX systems, tcsetpgrp
- will fail with EPERM if we try it before the child's
- setpgid. */
-
- /* Set up the "saved terminal modes" of the inferior
- based on what modes we are starting it with. */
- target_terminal_init ();
-
- /* Install inferior's terminal modes. */
- target_terminal_inferior ();
-
- terminal_initted = 1;
- }
-
- if (--pending_execs == 0)
- break;
-
- /* Just make it go on. */
- target_resume (resume_ptid, 0, TARGET_SIGNAL_0);
- }
- }
+ ptid_t ptid = startup_inferior (proc_target, pid, num_traps, NULL, NULL);
/* Mark all threads non-executing. */
- set_executing (pid_to_ptid (-1), 0);
+ set_executing (proc_target, ptid, false);
- stop_pc = read_pc ();
+ return ptid;
}
/* Implement the "unset exec-wrapper" command. */
static void
-unset_exec_wrapper_command (char *args, int from_tty)
+unset_exec_wrapper_command (const char *args, int from_tty)
{
- xfree (exec_wrapper);
- exec_wrapper = NULL;
+ exec_wrapper.clear ();
}
-/* Provide a prototype to silence -Wmissing-prototypes. */
-extern initialize_file_ftype _initialize_fork_child;
+static void
+show_startup_with_shell (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ gdb_printf (file,
+ _("Use of shell to start subprocesses is %s.\n"),
+ value);
+}
+void _initialize_fork_child ();
void
-_initialize_fork_child (void)
+_initialize_fork_child ()
{
add_setshow_filename_cmd ("exec-wrapper", class_run, &exec_wrapper, _("\
Set a wrapper for running programs.\n\
&setlist, &showlist);
add_cmd ("exec-wrapper", class_run, unset_exec_wrapper_command,
- _("Disable use of an execution wrapper."),
- &unsetlist);
+ _("Disable use of an execution wrapper."),
+ &unsetlist);
+
+ add_setshow_boolean_cmd ("startup-with-shell", class_support,
+ &startup_with_shell, _("\
+Set use of shell to start subprocesses. The default is on."), _("\
+Show use of shell to start subprocesses."), NULL,
+ NULL,
+ show_startup_with_shell,
+ &setlist, &showlist);
}