/* Native debugging support for Intel x86 running DJGPP.
- Copyright 1997, 1999, 2000, 2001 Free Software Foundation, Inc.
+ Copyright (C) 1997, 1999, 2000, 2001, 2005, 2006, 2007, 2008, 2009, 2010
+ Free Software Foundation, Inc.
Written by Robert Hoehne.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+/* To whomever it may concern, here's a general description of how
+ debugging in DJGPP works, and the special quirks GDB does to
+ support that.
+
+ When the DJGPP port of GDB is debugging a DJGPP program natively,
+ there aren't 2 separate processes, the debuggee and GDB itself, as
+ on other systems. (This is DOS, where there can only be one active
+ process at any given time, remember?) Instead, GDB and the
+ debuggee live in the same process. So when GDB calls
+ go32_create_inferior below, and that function calls edi_init from
+ the DJGPP debug support library libdbg.a, we load the debuggee's
+ executable file into GDB's address space, set it up for execution
+ as the stub loader (a short real-mode program prepended to each
+ DJGPP executable) normally would, and do a lot of preparations for
+ swapping between GDB's and debuggee's internal state, primarily wrt
+ the exception handlers. This swapping happens every time we resume
+ the debuggee or switch back to GDB's code, and it includes:
+
+ . swapping all the segment registers
+ . swapping the PSP (the Program Segment Prefix)
+ . swapping the signal handlers
+ . swapping the exception handlers
+ . swapping the FPU status
+ . swapping the 3 standard file handles (more about this below)
+
+ Then running the debuggee simply means longjmp into it where its PC
+ is and let it run until it stops for some reason. When it stops,
+ GDB catches the exception that stopped it and longjmp's back into
+ its own code. All the possible exit points of the debuggee are
+ watched; for example, the normal exit point is recognized because a
+ DOS program issues a special system call to exit. If one of those
+ exit points is hit, we mourn the inferior and clean up after it.
+ Cleaning up is very important, even if the process exits normally,
+ because otherwise we might leave behind traces of previous
+ execution, and in several cases GDB itself might be left hosed,
+ because all the exception handlers were not restored.
+
+ Swapping of the standard handles (in redir_to_child and
+ redir_to_debugger) is needed because, since both GDB and the
+ debuggee live in the same process, as far as the OS is concerned,
+ the share the same file table. This means that the standard
+ handles 0, 1, and 2 point to the same file table entries, and thus
+ are connected to the same devices. Therefore, if the debugger
+ redirects its standard output, the standard output of the debuggee
+ is also automagically redirected to the same file/device!
+ Similarly, if the debuggee redirects its stdout to a file, you
+ won't be able to see debugger's output (it will go to the same file
+ where the debuggee has its output); and if the debuggee closes its
+ standard input, you will lose the ability to talk to debugger!
+
+ For this reason, every time the debuggee is about to be resumed, we
+ call redir_to_child, which redirects the standard handles to where
+ the debuggee expects them to be. When the debuggee stops and GDB
+ regains control, we call redir_to_debugger, which redirects those 3
+ handles back to where GDB expects.
+
+ Note that only the first 3 handles are swapped, so if the debuggee
+ redirects or closes any other handles, GDB will not notice. In
+ particular, the exit code of a DJGPP program forcibly closes all
+ file handles beyond the first 3 ones, so when the debuggee exits,
+ GDB currently loses its stdaux and stdprn streams. Fortunately,
+ GDB does not use those as of this writing, and will never need
+ to. */
#include <fcntl.h>
#include "defs.h"
+#include "i386-nat.h"
#include "inferior.h"
+#include "gdbthread.h"
#include "gdb_wait.h"
#include "gdbcore.h"
#include "command.h"
#include "gdbcmd.h"
#include "floatformat.h"
#include "buildsym.h"
-#include "i387-nat.h"
+#include "i387-tdep.h"
+#include "i386-tdep.h"
#include "value.h"
#include "regcache.h"
#include "gdb_string.h"
+#include "top.h"
#include <stdio.h> /* might be required for __DJGPP_MINOR__ */
#include <stdlib.h>
#include <debug/redir.h>
#endif
+#include <langinfo.h>
+
#if __DJGPP_MINOR__ < 3
/* This code will be provided from DJGPP 2.03 on. Until then I code it
here */
static int prog_has_started = 0;
static void go32_open (char *name, int from_tty);
static void go32_close (int quitting);
-static void go32_attach (char *args, int from_tty);
-static void go32_detach (char *args, int from_tty);
-static void go32_resume (ptid_t ptid, int step,
- enum target_signal siggnal);
-static ptid_t go32_wait (ptid_t ptid,
- struct target_waitstatus *status);
-static void go32_fetch_registers (int regno);
-static void store_register (int regno);
-static void go32_store_registers (int regno);
-static void go32_prepare_to_store (void);
-static int go32_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len,
+static void go32_attach (struct target_ops *ops, char *args, int from_tty);
+static void go32_detach (struct target_ops *ops, char *args, int from_tty);
+static void go32_resume (struct target_ops *ops,
+ ptid_t ptid, int step,
+ enum target_signal siggnal);
+static void go32_fetch_registers (struct target_ops *ops,
+ struct regcache *, int regno);
+static void store_register (const struct regcache *, int regno);
+static void go32_store_registers (struct target_ops *ops,
+ struct regcache *, int regno);
+static void go32_prepare_to_store (struct regcache *);
+static int go32_xfer_memory (CORE_ADDR memaddr, gdb_byte *myaddr, int len,
int write,
struct mem_attrib *attrib,
struct target_ops *target);
static void go32_files_info (struct target_ops *target);
-static void go32_stop (void);
-static void go32_kill_inferior (void);
-static void go32_create_inferior (char *exec_file, char *args, char **env);
-static void go32_mourn_inferior (void);
+static void go32_kill_inferior (struct target_ops *ops);
+static void go32_create_inferior (struct target_ops *ops, char *exec_file,
+ char *args, char **env, int from_tty);
+static void go32_mourn_inferior (struct target_ops *ops);
static int go32_can_run (void);
static struct target_ops go32_ops;
}
static void
-go32_attach (char *args, int from_tty)
+go32_attach (struct target_ops *ops, char *args, int from_tty)
{
- error ("\
+ error (_("\
You cannot attach to a running program on this platform.\n\
-Use the `run' command to run DJGPP programs.");
+Use the `run' command to run DJGPP programs."));
}
static void
-go32_detach (char *args, int from_tty)
+go32_detach (struct target_ops *ops, char *args, int from_tty)
{
}
static int resume_signal = -1;
static void
-go32_resume (ptid_t ptid, int step, enum target_signal siggnal)
+go32_resume (struct target_ops *ops,
+ ptid_t ptid, int step, enum target_signal siggnal)
{
int i;
static char child_cwd[FILENAME_MAX];
static ptid_t
-go32_wait (ptid_t ptid, struct target_waitstatus *status)
+go32_wait (struct target_ops *ops,
+ ptid_t ptid, struct target_waitstatus *status, int options)
{
int i;
unsigned char saved_opcode;
}
static void
-fetch_register (int regno)
+fetch_register (struct regcache *regcache, int regno)
{
- if (regno < FP0_REGNUM)
- supply_register (regno, (char *) &a_tss + regno_mapping[regno].tss_ofs);
- else if (regno <= LAST_FPU_CTRL_REGNUM)
- i387_supply_register (regno, (char *) &npx);
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ if (regno < gdbarch_fp0_regnum (gdbarch))
+ regcache_raw_supply (regcache, regno,
+ (char *) &a_tss + regno_mapping[regno].tss_ofs);
+ else if (i386_fp_regnum_p (gdbarch, regno) || i386_fpc_regnum_p (gdbarch, regno))
+ i387_supply_fsave (regcache, regno, &npx);
else
internal_error (__FILE__, __LINE__,
- "Invalid register no. %d in fetch_register.", regno);
+ _("Invalid register no. %d in fetch_register."), regno);
}
static void
-go32_fetch_registers (int regno)
+go32_fetch_registers (struct target_ops *ops,
+ struct regcache *regcache, int regno)
{
if (regno >= 0)
- fetch_register (regno);
+ fetch_register (regcache, regno);
else
{
- for (regno = 0; regno < FP0_REGNUM; regno++)
- fetch_register (regno);
- i387_supply_fsave ((char *) &npx);
+ for (regno = 0;
+ regno < gdbarch_fp0_regnum (get_regcache_arch (regcache));
+ regno++)
+ fetch_register (regcache, regno);
+ i387_supply_fsave (regcache, -1, &npx);
}
}
static void
-store_register (int regno)
+store_register (const struct regcache *regcache, int regno)
{
- if (regno < FP0_REGNUM)
- regcache_collect (regno, (void *) &a_tss + regno_mapping[regno].tss_ofs);
- else if (regno <= LAST_FPU_CTRL_REGNUM)
- i387_fill_fsave ((char *)&npx, regno);
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ if (regno < gdbarch_fp0_regnum (gdbarch))
+ regcache_raw_collect (regcache, regno,
+ (char *) &a_tss + regno_mapping[regno].tss_ofs);
+ else if (i386_fp_regnum_p (gdbarch, regno) || i386_fpc_regnum_p (gdbarch, regno))
+ i387_collect_fsave (regcache, regno, &npx);
else
internal_error (__FILE__, __LINE__,
- "Invalid register no. %d in store_register.", regno);
+ _("Invalid register no. %d in store_register."), regno);
}
static void
-go32_store_registers (int regno)
+go32_store_registers (struct target_ops *ops,
+ struct regcache *regcache, int regno)
{
unsigned r;
if (regno >= 0)
- store_register (regno);
+ store_register (regcache, regno);
else
{
- for (r = 0; r < FP0_REGNUM; r++)
- store_register (r);
- i387_fill_fsave ((char *) &npx, -1);
+ for (r = 0; r < gdbarch_fp0_regnum (get_regcache_arch (regcache)); r++)
+ store_register (regcache, r);
+ i387_collect_fsave (regcache, -1, &npx);
}
}
static void
-go32_prepare_to_store (void)
+go32_prepare_to_store (struct regcache *regcache)
{
}
static int
-go32_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int write,
+go32_xfer_memory (CORE_ADDR memaddr, gdb_byte *myaddr, int len, int write,
struct mem_attrib *attrib, struct target_ops *target)
{
if (write)
}
static void
-go32_stop (void)
+go32_kill_inferior (struct target_ops *ops)
{
- normal_stop ();
- cleanup_client ();
- inferior_ptid = null_ptid;
- prog_has_started = 0;
-}
-
-static void
-go32_kill_inferior (void)
-{
- redir_cmdline_delete (&child_cmd);
- resume_signal = -1;
- resume_is_step = 0;
- unpush_target (&go32_ops);
+ go32_mourn_inferior (ops);
}
static void
-go32_create_inferior (char *exec_file, char *args, char **env)
+go32_create_inferior (struct target_ops *ops, char *exec_file,
+ char *args, char **env, int from_tty)
{
extern char **environ;
jmp_buf start_state;
char *cmdline;
char **env_save = environ;
size_t cmdlen;
+ struct inferior *inf;
/* If no exec file handed to us, get it from the exec-file command -- with
a good, common error message if none is specified. */
if (exec_file == 0)
exec_file = get_exec_file (1);
- if (prog_has_started)
- {
- go32_stop ();
- go32_kill_inferior ();
- }
resume_signal = -1;
resume_is_step = 0;
/* Init command line storage. */
if (redir_debug_init (&child_cmd) == -1)
internal_error (__FILE__, __LINE__,
- "Cannot allocate redirection storage: not enough memory.\n");
+ _("Cannot allocate redirection storage: not enough memory.\n"));
/* Parse the command line and create redirections. */
if (strpbrk (args, "<>"))
if (redir_cmdline_parse (args, &child_cmd) == 0)
args = child_cmd.command;
else
- error ("Syntax error in command line.");
+ error (_("Syntax error in command line."));
}
else
child_cmd.command = xstrdup (args);
/* v2loadimage passes command lines via DOS memory, so it cannot
possibly handle commands longer than 1MB. */
if (cmdlen > 1024*1024)
- error ("Command line too long.");
+ error (_("Command line too long."));
cmdline = xmalloc (cmdlen + 4);
strcpy (cmdline + 1, args);
#endif
inferior_ptid = pid_to_ptid (SOME_PID);
+ inf = current_inferior ();
+ inferior_appeared (inf, SOME_PID);
+
push_target (&go32_ops);
+
+ add_thread_silent (inferior_ptid);
+
clear_proceed_status ();
insert_breakpoints ();
- proceed ((CORE_ADDR) -1, TARGET_SIGNAL_0, 0);
prog_has_started = 1;
}
static void
-go32_mourn_inferior (void)
+go32_mourn_inferior (struct target_ops *ops)
{
+ ptid_t ptid;
+
+ redir_cmdline_delete (&child_cmd);
+ resume_signal = -1;
+ resume_is_step = 0;
+
+ cleanup_client ();
+
/* We need to make sure all the breakpoint enable bits in the DR7
register are reset when the inferior exits. Otherwise, if they
rerun the inferior, the uncleared bits may cause random SIGTRAPs,
at all times, but it doesn't, probably under an assumption that
the OS cleans up when the debuggee exits. */
i386_cleanup_dregs ();
- go32_kill_inferior ();
+
+ ptid = inferior_ptid;
+ inferior_ptid = null_ptid;
+ delete_thread_silent (ptid);
+ prog_has_started = 0;
+
+ unpush_target (ops);
generic_mourn_inferior ();
}
/* Pass the address ADDR to the inferior in the I'th debug register.
Here we just store the address in D_REGS, the watchpoint will be
actually set up when go32_wait runs the debuggee. */
-void
+static void
go32_set_dr (int i, CORE_ADDR addr)
{
if (i < 0 || i > 3)
internal_error (__FILE__, __LINE__,
- "Invalid register %d in go32_set_dr.\n", i);
+ _("Invalid register %d in go32_set_dr.\n"), i);
D_REGS[i] = addr;
}
/* Pass the value VAL to the inferior in the DR7 debug control
register. Here we just store the address in D_REGS, the watchpoint
will be actually set up when go32_wait runs the debuggee. */
-void
-go32_set_dr7 (unsigned val)
+static void
+go32_set_dr7 (unsigned long val)
{
CONTROL = val;
}
/* Get the value of the DR6 debug status register from the inferior.
Here we just return the value stored in D_REGS, as we've got it
from the last go32_wait call. */
-unsigned
+static unsigned long
go32_get_dr6 (void)
{
return STATUS;
if (redir_to_child (&child_cmd) == -1)
{
redir_to_debugger (&child_cmd);
- error ("Cannot redirect standard handles for program: %s.",
- strerror (errno));
+ error (_("Cannot redirect standard handles for program: %s."),
+ safe_strerror (errno));
}
/* set the console device of the inferior to whatever mode
(raw or cooked) we found it last time */
if (redir_to_debugger (&child_cmd) == -1)
{
redir_to_child (&child_cmd);
- error ("Cannot redirect standard handles for debugger: %s.",
- strerror (errno));
+ error (_("Cannot redirect standard handles for debugger: %s."),
+ safe_strerror (errno));
}
}
}
+static int
+go32_thread_alive (struct target_ops *ops, ptid_t ptid)
+{
+ return !ptid_equal (inferior_ptid, null_ptid);
+}
+
+static char *
+go32_pid_to_str (struct target_ops *ops, ptid_t ptid)
+{
+ return normal_pid_to_str (ptid);
+}
+
static void
init_go32_ops (void)
{
go32_ops.to_fetch_registers = go32_fetch_registers;
go32_ops.to_store_registers = go32_store_registers;
go32_ops.to_prepare_to_store = go32_prepare_to_store;
- go32_ops.to_xfer_memory = go32_xfer_memory;
+ go32_ops.deprecated_xfer_memory = go32_xfer_memory;
go32_ops.to_files_info = go32_files_info;
go32_ops.to_insert_breakpoint = memory_insert_breakpoint;
go32_ops.to_remove_breakpoint = memory_remove_breakpoint;
go32_ops.to_create_inferior = go32_create_inferior;
go32_ops.to_mourn_inferior = go32_mourn_inferior;
go32_ops.to_can_run = go32_can_run;
- go32_ops.to_stop = go32_stop;
+ go32_ops.to_thread_alive = go32_thread_alive;
+ go32_ops.to_pid_to_str = go32_pid_to_str;
go32_ops.to_stratum = process_stratum;
- go32_ops.to_has_all_memory = 1;
- go32_ops.to_has_memory = 1;
- go32_ops.to_has_stack = 1;
- go32_ops.to_has_registers = 1;
- go32_ops.to_has_execution = 1;
+ go32_ops.to_has_all_memory = default_child_has_all_memory;
+ go32_ops.to_has_memory = default_child_has_memory;
+ go32_ops.to_has_stack = default_child_has_stack;
+ go32_ops.to_has_registers = default_child_has_registers;
+ go32_ops.to_has_execution = default_child_has_execution;
+
+ i386_use_watchpoints (&go32_ops);
+
+
+ i386_dr_low.set_control = go32_set_dr7;
+ i386_dr_low.set_addr = go32_set_dr;
+ i386_dr_low.reset_addr = NULL;
+ i386_dr_low.get_status = go32_get_dr6;
+ i386_set_debug_register_length (4);
+
go32_ops.to_magic = OPS_MAGIC;
/* Initialize child's cwd as empty to be initialized when starting
/* Initialize child's command line storage. */
if (redir_debug_init (&child_cmd) == -1)
internal_error (__FILE__, __LINE__,
- "Cannot allocate redirection storage: not enough memory.\n");
+ _("Cannot allocate redirection storage: not enough memory.\n"));
/* We are always processing GCC-compiled programs. */
processing_gcc_compilation = 2;
+
+ /* Override the default name of the GDB init file. */
+ strcpy (gdbinit, "gdb.ini");
+}
+
+/* Return the current DOS codepage number. */
+static int
+dos_codepage (void)
+{
+ __dpmi_regs regs;
+
+ regs.x.ax = 0x6601;
+ __dpmi_int (0x21, ®s);
+ if (!(regs.x.flags & 1))
+ return regs.x.bx & 0xffff;
+ else
+ return 437; /* default */
+}
+
+/* Limited emulation of `nl_langinfo', for charset.c. */
+char *
+nl_langinfo (nl_item item)
+{
+ char *retval;
+
+ switch (item)
+ {
+ case CODESET:
+ {
+ /* 8 is enough for SHORT_MAX + "CP" + null. */
+ char buf[8];
+ int blen = sizeof (buf);
+ int needed = snprintf (buf, blen, "CP%d", dos_codepage ());
+
+ if (needed > blen) /* should never happen */
+ buf[0] = 0;
+ retval = xstrdup (buf);
+ }
+ break;
+ default:
+ retval = xstrdup ("");
+ break;
+ }
+ return retval;
}
unsigned short windows_major, windows_minor;
static void
go32_sysinfo (char *arg, int from_tty)
{
+ static const char test_pattern[] =
+ "deadbeafdeadbeafdeadbeafdeadbeafdeadbeaf"
+ "deadbeafdeadbeafdeadbeafdeadbeafdeadbeaf"
+ "deadbeafdeadbeafdeadbeafdeadbeafdeadbeafdeadbeaf";
struct utsname u;
char cpuid_vendor[13];
unsigned cpuid_max = 0, cpuid_eax, cpuid_ebx, cpuid_ecx, cpuid_edx;
unsigned advertized_dos_version = ((unsigned int)_osmajor << 8) | _osminor;
int dpmi_flags;
char dpmi_vendor_info[129];
- int dpmi_vendor_available =
- __dpmi_get_capabilities (&dpmi_flags, dpmi_vendor_info);
+ int dpmi_vendor_available;
__dpmi_version_ret dpmi_version_data;
long eflags;
__dpmi_free_mem_info mem_info;
printf_filtered ("%s)\n", windows_flavor);
}
else if (true_dos_version == 0x532 && advertized_dos_version == 0x500)
- printf_filtered ("Windows Version................Windows NT or Windows 2000\n");
+ printf_filtered ("Windows Version................Windows NT family (W2K/XP/W2K3/Vista/W2K8)\n");
puts_filtered ("\n");
- if (dpmi_vendor_available == 0)
+ /* On some versions of Windows, __dpmi_get_capabilities returns
+ zero, but the buffer is not filled with info, so we fill the
+ buffer with a known pattern and test for it afterwards. */
+ memcpy (dpmi_vendor_info, test_pattern, sizeof(dpmi_vendor_info));
+ dpmi_vendor_available =
+ __dpmi_get_capabilities (&dpmi_flags, dpmi_vendor_info);
+ if (dpmi_vendor_available == 0
+ && memcmp (dpmi_vendor_info, test_pattern,
+ sizeof(dpmi_vendor_info)) != 0)
{
/* The DPMI spec says the vendor string should be ASCIIZ, but
I don't trust the vendors to follow that... */
(unsigned)dpmi_vendor_info[1],
((unsigned)dpmi_flags & 0x7f));
}
+ else
+ printf_filtered ("DPMI Host......................(Info not available)\n");
__dpmi_get_version (&dpmi_version_data);
printf_filtered ("DPMI Version...................%d.%02d\n",
dpmi_version_data.major, dpmi_version_data.minor);
}
struct seg_descr {
- unsigned short limit0 __attribute__((packed));
- unsigned short base0 __attribute__((packed));
- unsigned char base1 __attribute__((packed));
- unsigned stype:5 __attribute__((packed));
- unsigned dpl:2 __attribute__((packed));
- unsigned present:1 __attribute__((packed));
- unsigned limit1:4 __attribute__((packed));
- unsigned available:1 __attribute__((packed));
- unsigned dummy:1 __attribute__((packed));
- unsigned bit32:1 __attribute__((packed));
- unsigned page_granular:1 __attribute__((packed));
- unsigned char base2 __attribute__((packed));
-};
+ unsigned short limit0;
+ unsigned short base0;
+ unsigned char base1;
+ unsigned stype:5;
+ unsigned dpl:2;
+ unsigned present:1;
+ unsigned limit1:4;
+ unsigned available:1;
+ unsigned dummy:1;
+ unsigned bit32:1;
+ unsigned page_granular:1;
+ unsigned char base2;
+} __attribute__ ((packed));
struct gate_descr {
- unsigned short offset0 __attribute__((packed));
- unsigned short selector __attribute__((packed));
- unsigned param_count:5 __attribute__((packed));
- unsigned dummy:3 __attribute__((packed));
- unsigned stype:5 __attribute__((packed));
- unsigned dpl:2 __attribute__((packed));
- unsigned present:1 __attribute__((packed));
- unsigned short offset1 __attribute__((packed));
-};
+ unsigned short offset0;
+ unsigned short selector;
+ unsigned param_count:5;
+ unsigned dummy:3;
+ unsigned stype:5;
+ unsigned dpl:2;
+ unsigned present:1;
+ unsigned short offset1;
+} __attribute__ ((packed));
/* Read LEN bytes starting at logical address ADDR, and put the result
into DEST. Return 1 if success, zero if not. */
if (ldt_entry < 0
|| (ldt_entry & 4) == 0
|| (ldt_entry & 3) != (cpl & 3))
- error ("Invalid LDT entry 0x%03x.", ldt_entry);
+ error (_("Invalid LDT entry 0x%03lx."), (unsigned long)ldt_entry);
}
}
if (ldt_entry >= 0)
{
if (ldt_entry > limit)
- error ("Invalid LDT entry %#x: outside valid limits [0..%#x]",
- ldt_entry, limit);
+ error (_("Invalid LDT entry %#lx: outside valid limits [0..%#x]"),
+ (unsigned long)ldt_entry, limit);
display_descriptor (ldt_descr.stype, base, ldt_entry / 8, 1);
}
{
gdt_entry = parse_and_eval_long (arg);
if (gdt_entry < 0 || (gdt_entry & 7) != 0)
- error ("Invalid GDT entry 0x%03x: not an integral multiple of 8.",
- gdt_entry);
+ error (_("Invalid GDT entry 0x%03lx: not an integral multiple of 8."),
+ (unsigned long)gdt_entry);
}
}
if (gdt_entry >= 0)
{
if (gdt_entry > gdtr.limit)
- error ("Invalid GDT entry %#x: outside valid limits [0..%#x]",
- gdt_entry, gdtr.limit);
+ error (_("Invalid GDT entry %#lx: outside valid limits [0..%#x]"),
+ (unsigned long)gdt_entry, gdtr.limit);
display_descriptor (0, gdtr.base, gdt_entry / 8, 1);
}
{
idt_entry = parse_and_eval_long (arg);
if (idt_entry < 0)
- error ("Invalid (negative) IDT entry %d.", idt_entry);
+ error (_("Invalid (negative) IDT entry %ld."), idt_entry);
}
}
if (idt_entry >= 0)
{
if (idt_entry > idtr.limit)
- error ("Invalid IDT entry %#x: outside valid limits [0..%#x]",
- idt_entry, idtr.limit);
+ error (_("Invalid IDT entry %#lx: outside valid limits [0..%#x]"),
+ (unsigned long)idt_entry, idtr.limit);
display_descriptor (1, idtr.base, idt_entry, 1);
}
{
pde_idx = parse_and_eval_long (arg);
if (pde_idx < 0 || pde_idx >= 1024)
- error ("Entry %ld is outside valid limits [0..1023].", pde_idx);
+ error (_("Entry %ld is outside valid limits [0..1023]."), pde_idx);
}
}
static void
go32_pte (char *arg, int from_tty)
{
- long pde_idx = -1, i;
+ long pde_idx = -1L, i;
if (arg && *arg)
{
{
pde_idx = parse_and_eval_long (arg);
if (pde_idx < 0 || pde_idx >= 1024)
- error ("Entry %d is outside valid limits [0..1023].", pde_idx);
+ error (_("Entry %ld is outside valid limits [0..1023]."), pde_idx);
}
}
addr = parse_and_eval_address (arg);
}
if (!addr)
- error_no_arg ("linear address");
+ error_no_arg (_("linear address"));
pdbr = get_cr3 ();
if (!pdbr)
int pte_idx = (addr >> 12) & 0x3ff;
unsigned offs = addr & 0xfff;
- printf_filtered ("Page Table entry for address 0x%llx:\n",
- (unsigned long long)addr);
+ printf_filtered ("Page Table entry for address %s:\n",
+ hex_string(addr));
display_ptable_entry (get_pte (get_pde (pde_idx), pte_idx), 0, 1, offs);
}
}
init_go32_ops ();
add_target (&go32_ops);
- add_prefix_cmd ("dos", class_info, go32_info_dos_command,
- "Print information specific to DJGPP (a.k.a. MS-DOS) debugging.",
+ add_prefix_cmd ("dos", class_info, go32_info_dos_command, _("\
+Print information specific to DJGPP (aka MS-DOS) debugging."),
&info_dos_cmdlist, "info dos ", 0, &infolist);
- add_cmd ("sysinfo", class_info, go32_sysinfo,
- "Display information about the target system, including CPU, OS, DPMI, etc.",
+ add_cmd ("sysinfo", class_info, go32_sysinfo, _("\
+Display information about the target system, including CPU, OS, DPMI, etc."),
&info_dos_cmdlist);
- add_cmd ("ldt", class_info, go32_sldt,
- "Display entries in the LDT (Local Descriptor Table).\n"
- "Entry number (an expression) as an argument means display only that entry.",
+ add_cmd ("ldt", class_info, go32_sldt, _("\
+Display entries in the LDT (Local Descriptor Table).\n\
+Entry number (an expression) as an argument means display only that entry."),
&info_dos_cmdlist);
- add_cmd ("gdt", class_info, go32_sgdt,
- "Display entries in the GDT (Global Descriptor Table).\n"
- "Entry number (an expression) as an argument means display only that entry.",
+ add_cmd ("gdt", class_info, go32_sgdt, _("\
+Display entries in the GDT (Global Descriptor Table).\n\
+Entry number (an expression) as an argument means display only that entry."),
&info_dos_cmdlist);
- add_cmd ("idt", class_info, go32_sidt,
- "Display entries in the IDT (Interrupt Descriptor Table).\n"
- "Entry number (an expression) as an argument means display only that entry.",
+ add_cmd ("idt", class_info, go32_sidt, _("\
+Display entries in the IDT (Interrupt Descriptor Table).\n\
+Entry number (an expression) as an argument means display only that entry."),
&info_dos_cmdlist);
- add_cmd ("pde", class_info, go32_pde,
- "Display entries in the Page Directory.\n"
- "Entry number (an expression) as an argument means display only that entry.",
+ add_cmd ("pde", class_info, go32_pde, _("\
+Display entries in the Page Directory.\n\
+Entry number (an expression) as an argument means display only that entry."),
&info_dos_cmdlist);
- add_cmd ("pte", class_info, go32_pte,
- "Display entries in Page Tables.\n"
- "Entry number (an expression) as an argument means display only entries\n"
- "from the Page Table pointed to by the specified Page Directory entry.",
+ add_cmd ("pte", class_info, go32_pte, _("\
+Display entries in Page Tables.\n\
+Entry number (an expression) as an argument means display only entries\n\
+from the Page Table pointed to by the specified Page Directory entry."),
&info_dos_cmdlist);
- add_cmd ("address-pte", class_info, go32_pte_for_address,
- "Display a Page Table entry for a linear address.\n"
- "The address argument must be a linear address, after adding to\n"
- "it the base address of the appropriate segment.\n"
- "The base address of variables and functions in the debuggee's data\n"
- "or code segment is stored in the variable __djgpp_base_address,\n"
- "so use `__djgpp_base_address + (char *)&var' as the argument.\n"
- "For other segments, look up their base address in the output of\n"
- "the `info dos ldt' command.",
+ add_cmd ("address-pte", class_info, go32_pte_for_address, _("\
+Display a Page Table entry for a linear address.\n\
+The address argument must be a linear address, after adding to\n\
+it the base address of the appropriate segment.\n\
+The base address of variables and functions in the debuggee's data\n\
+or code segment is stored in the variable __djgpp_base_address,\n\
+so use `__djgpp_base_address + (char *)&var' as the argument.\n\
+For other segments, look up their base address in the output of\n\
+the `info dos ldt' command."),
&info_dos_cmdlist);
}