/* Saved registers. */
CORE_ADDR saved_regs[I386_NUM_SAVED_REGS];
CORE_ADDR saved_sp;
- int stack_align;
+ int saved_sp_reg;
int pc_in_eax;
/* Stack space reserved for local variables. */
for (i = 0; i < I386_NUM_SAVED_REGS; i++)
cache->saved_regs[i] = -1;
cache->saved_sp = 0;
- cache->stack_align = 0;
+ cache->saved_sp_reg = -1;
cache->pc_in_eax = 0;
/* Frameless until proven otherwise. */
i386_analyze_stack_align (CORE_ADDR pc, CORE_ADDR current_pc,
struct i386_frame_cache *cache)
{
- /* The register used by the compiler to perform the stack re-alignment
- is, in order of preference, either %ecx, %edx, or %eax. GCC should
- never use %ebx as it always treats it as callee-saved, whereas
- the compiler can only use caller-saved registers. */
- static const gdb_byte insns_ecx[10] = {
- 0x8d, 0x4c, 0x24, 0x04, /* leal 4(%esp), %ecx */
- 0x83, 0xe4, 0xf0, /* andl $-16, %esp */
- 0xff, 0x71, 0xfc /* pushl -4(%ecx) */
+ /* There are 2 code sequences to re-align stack before the frame
+ gets set up:
+
+ 1. Use a caller-saved saved register:
+
+ leal 4(%esp), %reg
+ andl $-XXX, %esp
+ pushl -4(%reg)
+
+ 2. Use a callee-saved saved register:
+
+ pushl %reg
+ leal 8(%esp), %reg
+ andl $-XXX, %esp
+ pushl -4(%reg)
+
+ "andl $-XXX, %esp" can be either 3 bytes or 6 bytes:
+
+ 0x83 0xe4 0xf0 andl $-16, %esp
+ 0x81 0xe4 0x00 0xff 0xff 0xff andl $-256, %esp
+ */
+
+ gdb_byte buf[14];
+ int reg;
+ int offset, offset_and;
+ static int regnums[8] = {
+ I386_EAX_REGNUM, /* %eax */
+ I386_ECX_REGNUM, /* %ecx */
+ I386_EDX_REGNUM, /* %edx */
+ I386_EBX_REGNUM, /* %ebx */
+ I386_ESP_REGNUM, /* %esp */
+ I386_EBP_REGNUM, /* %ebp */
+ I386_ESI_REGNUM, /* %esi */
+ I386_EDI_REGNUM /* %edi */
};
- static const gdb_byte insns_edx[10] = {
- 0x8d, 0x54, 0x24, 0x04, /* leal 4(%esp), %edx */
- 0x83, 0xe4, 0xf0, /* andl $-16, %esp */
- 0xff, 0x72, 0xfc /* pushl -4(%edx) */
- };
- static const gdb_byte insns_eax[10] = {
- 0x8d, 0x44, 0x24, 0x04, /* leal 4(%esp), %eax */
- 0x83, 0xe4, 0xf0, /* andl $-16, %esp */
- 0xff, 0x70, 0xfc /* pushl -4(%eax) */
- };
- gdb_byte buf[10];
- if (target_read_memory (pc, buf, sizeof buf)
- || (memcmp (buf, insns_ecx, sizeof buf) != 0
- && memcmp (buf, insns_edx, sizeof buf) != 0
- && memcmp (buf, insns_eax, sizeof buf) != 0))
+ if (target_read_memory (pc, buf, sizeof buf))
+ return pc;
+
+ /* Check caller-saved saved register. The first instruction has
+ to be "leal 4(%esp), %reg". */
+ if (buf[0] == 0x8d && buf[2] == 0x24 && buf[3] == 0x4)
+ {
+ /* MOD must be binary 10 and R/M must be binary 100. */
+ if ((buf[1] & 0xc7) != 0x44)
+ return pc;
+
+ /* REG has register number. */
+ reg = (buf[1] >> 3) & 7;
+ offset = 4;
+ }
+ else
+ {
+ /* Check callee-saved saved register. The first instruction
+ has to be "pushl %reg". */
+ if ((buf[0] & 0xf8) != 0x50)
+ return pc;
+
+ /* Get register. */
+ reg = buf[0] & 0x7;
+
+ /* The next instruction has to be "leal 8(%esp), %reg". */
+ if (buf[1] != 0x8d || buf[3] != 0x24 || buf[4] != 0x8)
+ return pc;
+
+ /* MOD must be binary 10 and R/M must be binary 100. */
+ if ((buf[2] & 0xc7) != 0x44)
+ return pc;
+
+ /* REG has register number. Registers in pushl and leal have to
+ be the same. */
+ if (reg != ((buf[2] >> 3) & 7))
+ return pc;
+
+ offset = 5;
+ }
+
+ /* Rigister can't be %esp nor %ebp. */
+ if (reg == 4 || reg == 5)
+ return pc;
+
+ /* The next instruction has to be "andl $-XXX, %esp". */
+ if (buf[offset + 1] != 0xe4
+ || (buf[offset] != 0x81 && buf[offset] != 0x83))
+ return pc;
+
+ offset_and = offset;
+ offset += buf[offset] == 0x81 ? 6 : 3;
+
+ /* The next instruction has to be "pushl -4(%reg)". 8bit -4 is
+ 0xfc. REG must be binary 110 and MOD must be binary 01. */
+ if (buf[offset] != 0xff
+ || buf[offset + 2] != 0xfc
+ || (buf[offset + 1] & 0xf8) != 0x70)
+ return pc;
+
+ /* R/M has register. Registers in leal and pushl have to be the
+ same. */
+ if (reg != (buf[offset + 1] & 7))
return pc;
- if (current_pc > pc + 4)
- cache->stack_align = 1;
+ if (current_pc > pc + offset_and)
+ cache->saved_sp_reg = regnums[reg];
- return min (pc + 10, current_pc);
+ return min (pc + offset + 3, current_pc);
}
/* Maximum instruction length we need to handle. */
if (cache->pc != 0)
i386_analyze_prologue (cache->pc, get_frame_pc (this_frame), cache);
- if (cache->stack_align)
+ if (cache->saved_sp_reg != -1)
{
- /* Saved stack pointer has been saved in %ecx. */
- get_frame_register (this_frame, I386_ECX_REGNUM, buf);
+ /* Saved stack pointer has been saved. */
+ get_frame_register (this_frame, cache->saved_sp_reg, buf);
cache->saved_sp = extract_unsigned_integer(buf, 4);
}
frame by looking at the stack pointer. For truly "frameless"
functions this might work too. */
- if (cache->stack_align)
+ if (cache->saved_sp_reg != -1)
{
/* We're halfway aligning the stack. */
cache->base = ((cache->saved_sp - 4) & 0xfffffff0) - 4;
(i386_frame_this_id, i386_sigtramp_frame_this_id,
i386_dummy_id). It's there, since all frame unwinders for
a given target have to agree (within a certain margin) on the
- definition of the stack address of a frame. Otherwise
- frame_id_inner() won't work correctly. Since DWARF2/GCC uses the
+ definition of the stack address of a frame. Otherwise frame id
+ comparison might not work correctly. Since DWARF2/GCC uses the
stack address *before* the function call as a frame's CFA. On
the i386, when %ebp is used as a frame pointer, the offset
between the contents %ebp and the CFA as defined by GCC. */
append_composite_type_field (t, "v8_int8",
init_vector_type (builtin_type_int8, 8));
- TYPE_FLAGS (t) |= TYPE_FLAG_VECTOR;
+ TYPE_VECTOR (t) = 1;
TYPE_NAME (t) = "builtin_type_vec64i";
tdep->i386_mmx_type = t;
}
init_vector_type (builtin_type_int64, 2));
append_composite_type_field (t, "uint128", builtin_type_int128);
- TYPE_FLAGS (t) |= TYPE_FLAG_VECTOR;
+ TYPE_VECTOR (t) = 1;
TYPE_NAME (t) = "builtin_type_vec128i";
tdep->i386_sse_type = t;
}
projects / binutils-gdb.git / blobdiff