-/* Native-dependent code for SVR4 Unix running on i386's, for GDB.
- Copyright 1988, 1989, 1991, 1992, 1996, 1998 Free Software Foundation, Inc.
+/* Native-dependent code for Unix SVR4 running on i386's.
-This file is part of GDB.
+ Copyright (C) 1988-2013 Free Software Foundation, Inc.
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
+ This file is part of GDB.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "value.h"
+#include "inferior.h"
+#include "regcache.h"
#ifdef HAVE_SYS_REG_H
#include <sys/reg.h>
#endif
+#include "i386-tdep.h"
+#include "i387-tdep.h"
#ifdef HAVE_SYS_PROCFS_H
#include <sys/procfs.h>
-/* The /proc interface divides the target machine's register set up into
- two different sets, the general register set (gregset) and the floating
- point register set (fpregset). For each set, there is an ioctl to get
- the current register set and another ioctl to set the current values.
-
- The actual structure passed through the ioctl interface is, of course,
- naturally machine dependent, and is different for each set of registers.
- For the i386 for example, the general register set is typically defined
- by:
-
- typedef int gregset_t[19]; (in <sys/regset.h>)
-
- #define GS 0 (in <sys/reg.h>)
- #define FS 1
- ...
- #define UESP 17
- #define SS 18
-
- and the floating point set by:
-
- typedef struct fpregset
- {
- union
- {
- struct fpchip_state // fp extension state //
- {
- int state[27]; // 287/387 saved state //
- int status; // status word saved at exception //
- } fpchip_state;
- struct fp_emul_space // for emulators //
- {
- char fp_emul[246];
- char fp_epad[2];
- } fp_emul_space;
- int f_fpregs[62]; // union of the above //
- } fp_reg_set;
- long f_wregs[33]; // saved weitek state //
- } fpregset_t;
-
- These routines provide the packing and unpacking of gregset_t and
- fpregset_t formatted data.
-
- */
+/* We must not compile this code for 64-bit Solaris x86. */
+#if !defined (PR_MODEL_NATIVE) || (PR_MODEL_NATIVE == PR_MODEL_ILP32)
+
+#include "gregset.h"
+
+/* The `/proc' interface divides the target machine's register set up
+ into two different sets, the general purpose register set (gregset)
+ and the floating-point register set (fpregset). For each set,
+ there is an ioctl to get the current register set and another ioctl
+ to set the current values.
+
+ The actual structure passed through the ioctl interface is, of
+ course, naturally machine dependent, and is different for each set
+ of registers. For the i386 for example, the general-purpose
+ register set is typically defined by:
+
+ typedef int gregset_t[19]; (in <sys/regset.h>)
+
+ #define GS 0 (in <sys/reg.h>)
+ #define FS 1
+ ...
+ #define UESP 17
+ #define SS 18
+
+ and the floating-point set by:
+
+ typedef struct fpregset {
+ union {
+ struct fpchip_state // fp extension state //
+ {
+ int state[27]; // 287/387 saved state //
+ int status; // status word saved at //
+ // exception //
+ } fpchip_state;
+ struct fp_emul_space // for emulators //
+ {
+ char fp_emul[246];
+ char fp_epad[2];
+ } fp_emul_space;
+ int f_fpregs[62]; // union of the above //
+ } fp_reg_set;
+ long f_wregs[33]; // saved weitek state //
+ } fpregset_t;
+
+ Incidentally fpchip_state contains the FPU state in the same format
+ as used by the "fsave" instruction, and that's the only thing we
+ support here. I don't know how the emulator stores it state. The
+ Weitek stuff definitely isn't supported.
+
+ The routines defined here, provide the packing and unpacking of
+ gregset_t and fpregset_t formatted data. */
#ifdef HAVE_GREGSET_T
-/* This is a duplicate of the table in i386-xdep.c. */
-
-static int regmap[] =
+/* Mapping between the general-purpose registers in `/proc'
+ format and GDB's register array layout. */
+static int regmap[] =
{
EAX, ECX, EDX, EBX,
UESP, EBP, ESI, EDI,
EIP, EFL, CS, SS,
- DS, ES, FS, GS,
+ DS, ES, FS, GS
};
-/* Prototypes for local functions */
-
-void fill_gregset PARAMS ((gregset_t *, int));
-
-void supply_gregset PARAMS ((gregset_t *));
-
-void supply_fpregset PARAMS ((fpregset_t *));
-
-void fill_fpregset PARAMS ((fpregset_t *, int));
-
-
-/* FIXME: These routine absolutely depends upon (NUM_REGS - NUM_FREGS)
- being less than or equal to the number of registers that can be stored
- in a gregset_t. Note that with the current scheme there will typically
- be more registers actually stored in a gregset_t that what we know
- about. This is bogus and should be fixed. */
-
-/* Given a pointer to a general register set in /proc format (gregset_t *),
- unpack the register contents and supply them as gdb's idea of the current
- register values. */
+/* Fill GDB's register array with the general-purpose register values
+ in *GREGSETP. */
void
-supply_gregset (gregsetp)
- gregset_t *gregsetp;
+supply_gregset (struct regcache *regcache, const gregset_t *gregsetp)
{
- register int regi;
- register greg_t *regp = (greg_t *) gregsetp;
- extern int regmap[];
-
- for (regi = 0 ; regi < (NUM_REGS - NUM_FREGS) ; regi++)
- {
- supply_register (regi, (char *) (regp + regmap[regi]));
- }
+ const greg_t *regp = (const greg_t *) gregsetp;
+ int regnum;
+
+ for (regnum = 0; regnum < I386_NUM_GREGS; regnum++)
+ regcache_raw_supply (regcache, regnum, regp + regmap[regnum]);
}
+/* Fill register REGNUM (if it is a general-purpose register) in
+ *GREGSETPS with the value in GDB's register array. If REGNUM is -1,
+ do this for all registers. */
+
void
-fill_gregset (gregsetp, regno)
- gregset_t *gregsetp;
- int regno;
+fill_gregset (const struct regcache *regcache,
+ gregset_t *gregsetp, int regnum)
{
- int regi;
- register greg_t *regp = (greg_t *) gregsetp;
- extern char registers[];
- extern int regmap[];
-
- for (regi = 0 ; regi < (NUM_REGS - NUM_FREGS) ; regi++)
- {
- if ((regno == -1) || (regno == regi))
- {
- *(regp + regmap[regi]) = *(int *) ®isters[REGISTER_BYTE (regi)];
- }
- }
+ greg_t *regp = (greg_t *) gregsetp;
+ int i;
+
+ for (i = 0; i < I386_NUM_GREGS; i++)
+ if (regnum == -1 || regnum == i)
+ regcache_raw_collect (regcache, i, regp + regmap[i]);
}
-#endif /* HAVE_GREGSET_T */
+#endif /* HAVE_GREGSET_T */
-#if defined (FP0_REGNUM) && defined (HAVE_FPREGSET_T)
+#ifdef HAVE_FPREGSET_T
-/* Given a pointer to a floating point register set in /proc format
- (fpregset_t *), unpack the register contents and supply them as gdb's
- idea of the current floating point register values. */
+/* Fill GDB's register array with the floating-point register values in
+ *FPREGSETP. */
-void
-supply_fpregset (fpregsetp)
- fpregset_t *fpregsetp;
+void
+supply_fpregset (struct regcache *regcache, const fpregset_t *fpregsetp)
{
- /* FIXME: see m68k-tdep.c for an example, for the m68k. */
+ if (gdbarch_fp0_regnum (get_regcache_arch (regcache)) == 0)
+ return;
+
+ i387_supply_fsave (regcache, -1, fpregsetp);
}
-/* Given a pointer to a floating point register set in /proc format
- (fpregset_t *), update the register specified by REGNO from gdb's idea
- of the current floating point register set. If REGNO is -1, update
- them all. */
+/* Fill register REGNO (if it is a floating-point register) in
+ *FPREGSETP with the value in GDB's register array. If REGNO is -1,
+ do this for all registers. */
void
-fill_fpregset (fpregsetp, regno)
- fpregset_t *fpregsetp;
- int regno;
+fill_fpregset (const struct regcache *regcache,
+ fpregset_t *fpregsetp, int regno)
{
- /* FIXME: see m68k-tdep.c for an example, for the m68k. */
+ if (gdbarch_fp0_regnum (get_regcache_arch (regcache)) == 0)
+ return;
+
+ i387_collect_fsave (regcache, regno, fpregsetp);
}
-#endif /* defined (FP0_REGNUM) && defined (HAVE_FPREGSET_T) */
+#endif /* HAVE_FPREGSET_T */
+
+#endif /* not 64-bit. */
-#endif /* HAVE_SYS_PROCFS_H */
+#endif /* HAVE_SYS_PROCFS_H */