/* FIXME: Put this declaration in frame.h. */
extern struct obstack frame_cache_obstack;
-/* FIXME! this code assumes 4-byte instructions. */
-#define MIPS_INSTLEN 4 /* Length of an instruction */
-#define MIPS16_INSTLEN 2 /* Length of an instruction on MIPS16*/
-#define MIPS_NUMREGS 32 /* Number of integer or float registers */
-typedef unsigned long t_inst; /* Integer big enough to hold an instruction */
-
-/* MIPS16 function addresses are odd (bit 0 is set). Here are some
- macros to test, set, or clear bit 0 of addresses. */
-#define IS_MIPS16_ADDR(addr) ((addr) & 1)
-#define MAKE_MIPS16_ADDR(addr) ((addr) | 1)
-#define UNMAKE_MIPS16_ADDR(addr) ((addr) & ~1)
-
#if 0
static int mips_in_lenient_prologue PARAMS ((CORE_ADDR, CORE_ADDR));
#endif
{
#if GDB_TARGET_IS_MIPS64
if ((addr >> 32 == (CORE_ADDR)0xffffffff)
- && (strcmp(target_shortname,"pmon")==0
- || strcmp(target_shortname,"ddb")==0
- || strcmp(target_shortname,"sim")==0))
+ && (strcmp (target_shortname,"pmon")==0
+ || strcmp (target_shortname,"ddb")==0
+ || strcmp (target_shortname,"sim")==0))
{
/* This hack is a work-around for existing boards using PMON,
the simulator, and any other 64-bit targets that doesn't have
return addr;
}
+void
+mips_init_frame_pc_first (fromleaf, prev)
+ int fromleaf;
+ struct frame_info *prev;
+{
+ CORE_ADDR pc, tmp;
+
+ pc = ((fromleaf) ? SAVED_PC_AFTER_CALL (prev->next) :
+ prev->next ? FRAME_SAVED_PC (prev->next) : read_pc ());
+ tmp = mips_skip_stub (pc);
+ prev->pc = tmp ? tmp : pc;
+}
+
+
CORE_ADDR
mips_frame_saved_pc(frame)
struct frame_info *frame;
else
warning("Hit heuristic-fence-post without finding");
- warning("enclosing function for address 0x%s", paddr (pc));
+ warning("enclosing function for address 0x%s", paddr_nz (pc));
if (!blurb_printed)
{
printf_filtered ("\
mips_frame_chain(frame)
struct frame_info *frame;
{
- mips_extra_func_info_t proc_desc;
- CORE_ADDR saved_pc = FRAME_SAVED_PC(frame);
-
- if (saved_pc == 0 || inside_entry_file (saved_pc))
- return 0;
-
- proc_desc = find_proc_desc(saved_pc, frame);
- if (!proc_desc)
- return 0;
-
- cached_proc_desc = proc_desc;
-
- /* If no frame pointer and frame size is zero, we must be at end
- of stack (or otherwise hosed). If we don't check frame size,
- we loop forever if we see a zero size frame. */
- if (PROC_FRAME_REG (proc_desc) == SP_REGNUM
- && PROC_FRAME_OFFSET (proc_desc) == 0
- /* The previous frame from a sigtramp frame might be frameless
- and have frame size zero. */
- && !frame->signal_handler_caller)
- return 0;
- else
- return get_frame_pointer (frame, proc_desc);
+ mips_extra_func_info_t proc_desc;
+ CORE_ADDR tmp;
+ CORE_ADDR saved_pc = FRAME_SAVED_PC(frame);
+
+ if (saved_pc == 0 || inside_entry_file (saved_pc))
+ return 0;
+
+ /* Check if the PC is inside a call stub. If it is, fetch the
+ PC of the caller of that stub. */
+ if ((tmp = mips_skip_stub (saved_pc)) != 0)
+ saved_pc = tmp;
+
+ /* Look up the procedure descriptor for this PC. */
+ proc_desc = find_proc_desc(saved_pc, frame);
+ if (!proc_desc)
+ return 0;
+
+ cached_proc_desc = proc_desc;
+
+ /* If no frame pointer and frame size is zero, we must be at end
+ of stack (or otherwise hosed). If we don't check frame size,
+ we loop forever if we see a zero size frame. */
+ if (PROC_FRAME_REG (proc_desc) == SP_REGNUM
+ && PROC_FRAME_OFFSET (proc_desc) == 0
+ /* The previous frame from a sigtramp frame might be frameless
+ and have frame size zero. */
+ && !frame->signal_handler_caller)
+ return 0;
+ else
+ return get_frame_pointer (frame, proc_desc);
}
void
if (regnum >= FP0_REGNUM && regnum < FP0_REGNUM+MIPS_NUMREGS
&& !((regnum-FP0_REGNUM) & 1))
{
- char dbuffer[MAX_REGISTER_RAW_SIZE];
+ char dbuffer[2 * MAX_REGISTER_RAW_SIZE];
- /* MIPS doubles are stored in a register pair with the least
- signficant register in the lower-numbered register. */
- read_relative_register_raw_bytes (regnum+1, dbuffer);
- read_relative_register_raw_bytes (regnum, dbuffer+MIPS_REGSIZE);
+ read_relative_register_raw_bytes (regnum, dbuffer);
+ read_relative_register_raw_bytes (regnum+1, dbuffer+MIPS_REGSIZE);
+ REGISTER_CONVERT_TO_TYPE (regnum, builtin_type_double, dbuffer);
printf_filtered ("(d%d: ", regnum-FP0_REGNUM);
val_print (builtin_type_double, dbuffer, 0,
if (TYPE_CODE (valtype) == TYPE_CODE_FLT
&& (mips_fpu == MIPS_FPU_DOUBLE
|| (mips_fpu == MIPS_FPU_SINGLE && len <= MIPS_REGSIZE)))
- {
- regnum = FP0_REGNUM;
-
- /* If this is a double, the odd-numbered register (FP1) contains the
- high word of the result. Copy that to the buffer before
- copying the low word in FP0. */
- if (len > MIPS_REGSIZE)
- {
- memcpy (valbuf, regbuf + REGISTER_BYTE (regnum+1), MIPS_REGSIZE);
- len -= MIPS_REGSIZE;
- valbuf += MIPS_REGSIZE;
- }
- }
+ regnum = FP0_REGNUM;
if (TARGET_BYTE_ORDER == BIG_ENDIAN
&& TYPE_CODE (valtype) != TYPE_CODE_FLT
offset = REGISTER_RAW_SIZE (regnum) - len;
memcpy (valbuf, regbuf + REGISTER_BYTE (regnum) + offset, len);
+ REGISTER_CONVERT_TO_TYPE (regnum, valtype, valbuf);
}
/* Given a return value in `regbuf' with a type `valtype',
regnum = FP0_REGNUM;
memcpy(raw_buffer, valbuf, TYPE_LENGTH (valtype));
-
-#ifdef REGISTER_CONVERT_FROM_TYPE
REGISTER_CONVERT_FROM_TYPE(regnum, valtype, raw_buffer);
-#endif
write_register_bytes(REGISTER_BYTE (regnum), raw_buffer, TYPE_LENGTH (valtype));
}
else
{
static char big_breakpoint[] = BIG_BREAKPOINT;
+ static char pmon_big_breakpoint[] = PMON_BIG_BREAKPOINT;
+ static char idt_big_breakpoint[] = IDT_BIG_BREAKPOINT;
+
*lenptr = sizeof(big_breakpoint);
- return big_breakpoint;
+
+ if (strcmp (target_shortname, "mips") == 0)
+ return idt_big_breakpoint;
+ else if (strcmp (target_shortname, "ddb") == 0
+ || strcmp (target_shortname, "pmon") == 0
+ || strcmp (target_shortname, "lsi") == 0)
+ return pmon_big_breakpoint;
+ else
+ return big_breakpoint;
}
}
else
else
{
static char little_breakpoint[] = LITTLE_BREAKPOINT;
+ static char pmon_little_breakpoint[] = PMON_LITTLE_BREAKPOINT;
+ static char idt_little_breakpoint[] = IDT_LITTLE_BREAKPOINT;
+
*lenptr = sizeof(little_breakpoint);
- return little_breakpoint;
+
+ if (strcmp (target_shortname, "mips") == 0)
+ return idt_little_breakpoint;
+ else if (strcmp (target_shortname, "ddb") == 0
+ || strcmp (target_shortname, "pmon") == 0
+ || strcmp (target_shortname, "lsi") == 0)
+ return pmon_little_breakpoint;
+ else
+ return little_breakpoint;
}
}
}
}
+/* If PC is in a mips16 call or return stub, return the address of the target
+ PC, which is either the callee or the caller. There are several
+ cases which must be handled:
+
+ * If the PC is in __mips16_ret_{d,s}f, this is a return stub and the
+ target PC is in $31 ($ra).
+ * If the PC is in __mips16_call_stub_{1..10}, this is a call stub
+ and the target PC is in $2.
+ * If the PC at the start of __mips16_call_stub_{s,d}f_{0..10}, i.e.
+ before the jal instruction, this is effectively a call stub
+ and the the target PC is in $2. Otherwise this is effectively
+ a return stub and the target PC is in $18.
+
+ See the source code for the stubs in gcc/config/mips/mips16.S for
+ gory details.
+
+ This function implements the SKIP_TRAMPOLINE_CODE macro.
+*/
+
+CORE_ADDR
+mips_skip_stub (pc)
+ CORE_ADDR pc;
+{
+ char *name;
+ CORE_ADDR start_addr;
+
+ /* Find the starting address and name of the function containing the PC. */
+ if (find_pc_partial_function (pc, &name, &start_addr, NULL) == 0)
+ return 0;
+
+ /* If the PC is in __mips16_ret_{d,s}f, this is a return stub and the
+ target PC is in $31 ($ra). */
+ if (strcmp (name, "__mips16_ret_sf") == 0
+ || strcmp (name, "__mips16_ret_df") == 0)
+ return read_register (RA_REGNUM);
+
+ if (strncmp (name, "__mips16_call_stub_", 19) == 0)
+ {
+ /* If the PC is in __mips16_call_stub_{1..10}, this is a call stub
+ and the target PC is in $2. */
+ if (name[19] >= '0' && name[19] <= '9')
+ return read_register (2);
+
+ /* If the PC at the start of __mips16_call_stub_{s,d}f_{0..10}, i.e.
+ before the jal instruction, this is effectively a call stub
+ and the the target PC is in $2. Otherwise this is effectively
+ a return stub and the target PC is in $18. */
+ else if (name[19] == 's' || name[19] == 'd')
+ {
+ if (pc == start_addr)
+ {
+ /* Check if the target of the stub is a compiler-generated
+ stub. Such a stub for a function bar might have a name
+ like __fn_stub_bar, and might look like this:
+ mfc1 $4,$f13
+ mfc1 $5,$f12
+ mfc1 $6,$f15
+ mfc1 $7,$f14
+ la $1,bar (becomes a lui/addiu pair)
+ jr $1
+ So scan down to the lui/addi and extract the target
+ address from those two instructions. */
+
+ CORE_ADDR target_pc = read_register (2);
+ t_inst inst;
+ int i;
+
+ /* See if the name of the target function is __fn_stub_*. */
+ if (find_pc_partial_function (target_pc, &name, NULL, NULL) == 0)
+ return target_pc;
+ if (strncmp (name, "__fn_stub_", 10) != 0
+ && strcmp (name, "etext") != 0
+ && strcmp (name, "_etext") != 0)
+ return target_pc;
+
+ /* Scan through this _fn_stub_ code for the lui/addiu pair.
+ The limit on the search is arbitrarily set to 20
+ instructions. FIXME. */
+ for (i = 0, pc = 0; i < 20; i++, target_pc += MIPS_INSTLEN)
+ {
+ inst = mips_fetch_instruction (target_pc);
+ if ((inst & 0xffff0000) == 0x3c010000) /* lui $at */
+ pc = (inst << 16) & 0xffff0000; /* high word */
+ else if ((inst & 0xffff0000) == 0x24210000) /* addiu $at */
+ return pc | (inst & 0xffff); /* low word */
+ }
+
+ /* Couldn't find the lui/addui pair, so return stub address. */
+ return target_pc;
+ }
+ else
+ /* This is the 'return' part of a call stub. The return
+ address is in $r18. */
+ return read_register (18);
+ }
+ }
+ return 0; /* not a stub */
+}
+
+
+/* Return non-zero if the PC is inside a call thunk (aka stub or trampoline).
+ This implements the IN_SOLIB_CALL_TRAMPOLINE macro. */
+
+int
+mips_in_call_stub (pc, name)
+ CORE_ADDR pc;
+ char *name;
+{
+ CORE_ADDR start_addr;
+
+ /* Find the starting address of the function containing the PC. If the
+ caller didn't give us a name, look it up at the same time. */
+ if (find_pc_partial_function (pc, name ? NULL : &name, &start_addr, NULL) == 0)
+ return 0;
+
+ if (strncmp (name, "__mips16_call_stub_", 19) == 0)
+ {
+ /* If the PC is in __mips16_call_stub_{1..10}, this is a call stub. */
+ if (name[19] >= '0' && name[19] <= '9')
+ return 1;
+ /* If the PC at the start of __mips16_call_stub_{s,d}f_{0..10}, i.e.
+ before the jal instruction, this is effectively a call stub. */
+ else if (name[19] == 's' || name[19] == 'd')
+ return pc == start_addr;
+ }
+
+ return 0; /* not a stub */
+}
+
+
+/* Return non-zero if the PC is inside a return thunk (aka stub or trampoline).
+ This implements the IN_SOLIB_RETURN_TRAMPOLINE macro. */
+
+int
+mips_in_return_stub (pc, name)
+ CORE_ADDR pc;
+ char *name;
+{
+ CORE_ADDR start_addr;
+
+ /* Find the starting address of the function containing the PC. */
+ if (find_pc_partial_function (pc, NULL, &start_addr, NULL) == 0)
+ return 0;
+
+ /* If the PC is in __mips16_ret_{d,s}f, this is a return stub. */
+ if (strcmp (name, "__mips16_ret_sf") == 0
+ || strcmp (name, "__mips16_ret_df") == 0)
+ return 1;
+
+ /* If the PC is in __mips16_call_stub_{s,d}f_{0..10} but not at the start,
+ i.e. after the jal instruction, this is effectively a return stub. */
+ if (strncmp (name, "__mips16_call_stub_", 19) == 0
+ && (name[19] == 's' || name[19] == 'd')
+ && pc != start_addr)
+ return 1;
+
+ return 0; /* not a stub */
+}
+
+
+/* Return non-zero if the PC is in a library helper function that should
+ be ignored. This implements the IGNORE_HELPER_CALL macro. */
+
+int
+mips_ignore_helper (pc)
+ CORE_ADDR pc;
+{
+ char *name;
+
+ /* Find the starting address and name of the function containing the PC. */
+ if (find_pc_partial_function (pc, &name, NULL, NULL) == 0)
+ return 0;
+
+ /* If the PC is in __mips16_ret_{d,s}f, this is a library helper function
+ that we want to ignore. */
+ return (strcmp (name, "__mips16_ret_sf") == 0
+ || strcmp (name, "__mips16_ret_df") == 0);
+}
+
+
void
_initialize_mips_tdep ()
{
projects / binutils-gdb.git / blobdiff