/* Target-dependent code for the Matsushita MN10300 for GDB, the GNU debugger.
- Copyright 1996, 1997, 1998, 1999, 2000, 2001
- Free Software Foundation, Inc.
+
+ Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002 Free Software
+ Foundation, Inc.
This file is part of GDB.
#include "regcache.h"
#include "arch-utils.h"
+#define D0_REGNUM 0
+#define D2_REGNUM 2
+#define D3_REGNUM 3
+#define A0_REGNUM 4
+#define A2_REGNUM 6
+#define A3_REGNUM 7
+#define MDR_REGNUM 10
+#define PSW_REGNUM 11
+#define LIR_REGNUM 12
+#define LAR_REGNUM 13
+#define MDRQ_REGNUM 14
+#define E0_REGNUM 15
+#define MCRH_REGNUM 26
+#define MCRL_REGNUM 27
+#define MCVF_REGNUM 28
+
+enum movm_register_bits {
+ movm_exother_bit = 0x01,
+ movm_exreg1_bit = 0x02,
+ movm_exreg0_bit = 0x04,
+ movm_other_bit = 0x08,
+ movm_a3_bit = 0x10,
+ movm_a2_bit = 0x20,
+ movm_d3_bit = 0x40,
+ movm_d2_bit = 0x80
+};
+
extern void _initialize_mn10300_tdep (void);
static CORE_ADDR mn10300_analyze_prologue (struct frame_info *fi,
CORE_ADDR pc);
return read_memory_integer (read_register (SP_REGNUM), 4);
}
-void
+static void
mn10300_extract_return_value (struct type *type, char *regbuf, char *valbuf)
{
if (TYPE_CODE (type) == TYPE_CODE_PTR)
so we need a single byte breakpoint. Matsushita hasn't defined
one, so we defined it ourselves. */
-static unsigned char *
+const static unsigned char *
mn10300_breakpoint_from_pc (CORE_ADDR *bp_addr, int *bp_size)
{
static char breakpoint[] =
if (fi == NULL || movm_args == 0)
return;
- if (movm_args & 0x10)
+ if (movm_args & movm_other_bit)
+ {
+ /* The `other' bit leaves a blank area of four bytes at the
+ beginning of its block of saved registers, making it 32 bytes
+ long in total. */
+ fi->saved_regs[LAR_REGNUM] = fi->frame + offset + 4;
+ fi->saved_regs[LIR_REGNUM] = fi->frame + offset + 8;
+ fi->saved_regs[MDR_REGNUM] = fi->frame + offset + 12;
+ fi->saved_regs[A0_REGNUM + 1] = fi->frame + offset + 16;
+ fi->saved_regs[A0_REGNUM] = fi->frame + offset + 20;
+ fi->saved_regs[D0_REGNUM + 1] = fi->frame + offset + 24;
+ fi->saved_regs[D0_REGNUM] = fi->frame + offset + 28;
+ offset += 32;
+ }
+ if (movm_args & movm_a3_bit)
{
fi->saved_regs[A3_REGNUM] = fi->frame + offset;
offset += 4;
}
- if (movm_args & 0x20)
+ if (movm_args & movm_a2_bit)
{
fi->saved_regs[A2_REGNUM] = fi->frame + offset;
offset += 4;
}
- if (movm_args & 0x40)
+ if (movm_args & movm_d3_bit)
{
fi->saved_regs[D3_REGNUM] = fi->frame + offset;
offset += 4;
}
- if (movm_args & 0x80)
+ if (movm_args & movm_d2_bit)
{
fi->saved_regs[D2_REGNUM] = fi->frame + offset;
offset += 4;
}
- if (AM33_MODE && movm_args & 0x02)
+ if (AM33_MODE)
{
- fi->saved_regs[E0_REGNUM + 5] = fi->frame + offset;
- fi->saved_regs[E0_REGNUM + 4] = fi->frame + offset + 4;
- fi->saved_regs[E0_REGNUM + 3] = fi->frame + offset + 8;
- fi->saved_regs[E0_REGNUM + 2] = fi->frame + offset + 12;
+ if (movm_args & movm_exother_bit)
+ {
+ fi->saved_regs[MCVF_REGNUM] = fi->frame + offset;
+ fi->saved_regs[MCRL_REGNUM] = fi->frame + offset + 4;
+ fi->saved_regs[MCRH_REGNUM] = fi->frame + offset + 8;
+ fi->saved_regs[MDRQ_REGNUM] = fi->frame + offset + 12;
+ fi->saved_regs[E0_REGNUM + 1] = fi->frame + offset + 16;
+ fi->saved_regs[E0_REGNUM + 0] = fi->frame + offset + 20;
+ offset += 24;
+ }
+ if (movm_args & movm_exreg1_bit)
+ {
+ fi->saved_regs[E0_REGNUM + 7] = fi->frame + offset;
+ fi->saved_regs[E0_REGNUM + 6] = fi->frame + offset + 4;
+ fi->saved_regs[E0_REGNUM + 5] = fi->frame + offset + 8;
+ fi->saved_regs[E0_REGNUM + 4] = fi->frame + offset + 12;
+ offset += 16;
+ }
+ if (movm_args & movm_exreg0_bit)
+ {
+ fi->saved_regs[E0_REGNUM + 3] = fi->frame + offset;
+ fi->saved_regs[E0_REGNUM + 2] = fi->frame + offset + 4;
+ offset += 8;
+ }
}
}
/* The main purpose of this file is dealing with prologues to extract
information about stack frames and saved registers.
- For reference here's how prologues look on the mn10300:
+ In gcc/config/mn13000/mn10300.c, the expand_prologue prologue
+ function is pretty readable, and has a nice explanation of how the
+ prologue is generated. The prologues generated by that code will
+ have the following form (NOTE: the current code doesn't handle all
+ this!):
+
+ + If this is an old-style varargs function, then its arguments
+ need to be flushed back to the stack:
+
+ mov d0,(4,sp)
+ mov d1,(4,sp)
+
+ + If we use any of the callee-saved registers, save them now.
+
+ movm [some callee-saved registers],(sp)
+
+ + If we have any floating-point registers to save:
+
+ - Decrement the stack pointer to reserve space for the registers.
+ If the function doesn't need a frame pointer, we may combine
+ this with the adjustment that reserves space for the frame.
- With frame pointer:
- movm [d2,d3,a2,a3],sp
- mov sp,a3
- add <size>,sp
+ add -SIZE, sp
- Without frame pointer:
- movm [d2,d3,a2,a3],sp (if needed)
- add <size>,sp
+ - Save the floating-point registers. We have two possible
+ strategies:
+
+ . Save them at fixed offset from the SP:
+
+ fmov fsN,(OFFSETN,sp)
+ fmov fsM,(OFFSETM,sp)
+ ...
+
+ Note that, if OFFSETN happens to be zero, you'll get the
+ different opcode: fmov fsN,(sp)
+
+ . Or, set a0 to the start of the save area, and then use
+ post-increment addressing to save the FP registers.
+
+ mov sp, a0
+ add SIZE, a0
+ fmov fsN,(a0+)
+ fmov fsM,(a0+)
+ ...
+
+ + If the function needs a frame pointer, we set it here.
+
+ mov sp, a3
+
+ + Now we reserve space for the stack frame proper. This could be
+ merged into the `add -SIZE, sp' instruction for FP saves up
+ above, unless we needed to set the frame pointer in the previous
+ step, or the frame is so large that allocating the whole thing at
+ once would put the FP register save slots out of reach of the
+ addressing mode (128 bytes).
+
+ add -SIZE, sp
One day we might keep the stack pointer constant, that won't
change the code for prologues, but it will make the frame
save instructions.
MY_FRAME_IN_FP: The base of the current frame is in the
- frame pointer register ($a2).
+ frame pointer register ($a3).
NO_MORE_FRAMES: Set this if the current frame is "start" or
if the first instruction looks like mov <imm>,sp. This tells
return addr;
}
- /* First see if this insn sets the stack pointer; if so, it's something
- we won't understand, so quit now. */
+ /* First see if this insn sets the stack pointer from a register; if
+ so, it's probably the initialization of the stack pointer in _start,
+ so mark this as the bottom-most frame. */
if (buf[0] == 0xf2 && (buf[1] & 0xf3) == 0xf0)
{
if (fi)
return addr;
}
+
+/* Function: saved_regs_size
+ Return the size in bytes of the register save area, based on the
+ saved_regs array in FI. */
+static int
+saved_regs_size (struct frame_info *fi)
+{
+ int adjust = 0;
+ int i;
+
+ /* Reserve four bytes for every register saved. */
+ for (i = 0; i < NUM_REGS; i++)
+ if (fi->saved_regs[i])
+ adjust += 4;
+
+ /* If we saved LIR, then it's most likely we used a `movm'
+ instruction with the `other' bit set, in which case the SP is
+ decremented by an extra four bytes, "to simplify calculation
+ of the transfer area", according to the processor manual. */
+ if (fi->saved_regs[LIR_REGNUM])
+ adjust += 4;
+
+ return adjust;
+}
+
+
/* Function: frame_chain
Figure out and return the caller's frame pointer given current
frame_info struct.
}
else
{
- int adjust = 0;
-
- adjust += (fi->saved_regs[D2_REGNUM] ? 4 : 0);
- adjust += (fi->saved_regs[D3_REGNUM] ? 4 : 0);
- adjust += (fi->saved_regs[A2_REGNUM] ? 4 : 0);
- adjust += (fi->saved_regs[A3_REGNUM] ? 4 : 0);
- if (AM33_MODE)
- {
- adjust += (fi->saved_regs[E0_REGNUM + 5] ? 4 : 0);
- adjust += (fi->saved_regs[E0_REGNUM + 4] ? 4 : 0);
- adjust += (fi->saved_regs[E0_REGNUM + 3] ? 4 : 0);
- adjust += (fi->saved_regs[E0_REGNUM + 2] ? 4 : 0);
- }
+ int adjust = saved_regs_size (fi);
/* Our caller does not have a frame pointer. So his frame starts
at the base of our frame (fi->frame) + register save space
static CORE_ADDR
mn10300_frame_saved_pc (struct frame_info *fi)
{
- int adjust = 0;
-
- adjust += (fi->saved_regs[D2_REGNUM] ? 4 : 0);
- adjust += (fi->saved_regs[D3_REGNUM] ? 4 : 0);
- adjust += (fi->saved_regs[A2_REGNUM] ? 4 : 0);
- adjust += (fi->saved_regs[A3_REGNUM] ? 4 : 0);
- if (AM33_MODE)
- {
- adjust += (fi->saved_regs[E0_REGNUM + 5] ? 4 : 0);
- adjust += (fi->saved_regs[E0_REGNUM + 4] ? 4 : 0);
- adjust += (fi->saved_regs[E0_REGNUM + 3] ? 4 : 0);
- adjust += (fi->saved_regs[E0_REGNUM + 2] ? 4 : 0);
- }
+ int adjust = saved_regs_size (fi);
return (read_memory_integer (fi->frame + adjust, REGISTER_SIZE));
}
plus any necessary offset to be applied to the register before
any frame pointer offsets. */
-void
-mn10300_virtual_frame_pointer (CORE_ADDR pc, long *reg, long *offset)
+static void
+mn10300_virtual_frame_pointer (CORE_ADDR pc,
+ int *reg,
+ LONGEST *offset)
{
struct frame_info *dummy = analyze_dummy_frame (pc, 0);
/* Set up a dummy frame_info, Analyze the prolog and fill in the
return 4;
}
+/* If DWARF2 is a register number appearing in Dwarf2 debug info, then
+ mn10300_dwarf2_reg_to_regnum (DWARF2) is the corresponding GDB
+ register number. Why don't Dwarf2 and GDB use the same numbering?
+ Who knows? But since people have object files lying around with
+ the existing Dwarf2 numbering, and other people have written stubs
+ to work with the existing GDB, neither of them can change. So we
+ just have to cope. */
+static int
+mn10300_dwarf2_reg_to_regnum (int dwarf2)
+{
+ /* This table is supposed to be shaped like the REGISTER_NAMES
+ initializer in gcc/config/mn10300/mn10300.h. Registers which
+ appear in GCC's numbering, but have no counterpart in GDB's
+ world, are marked with a -1. */
+ static int dwarf2_to_gdb[] = {
+ 0, 1, 2, 3, 4, 5, 6, 7, -1, 8,
+ 15, 16, 17, 18, 19, 20, 21, 22
+ };
+ int gdb;
+
+ if (dwarf2 < 0
+ || dwarf2 >= (sizeof (dwarf2_to_gdb) / sizeof (dwarf2_to_gdb[0]))
+ || dwarf2_to_gdb[dwarf2] == -1)
+ internal_error (__FILE__, __LINE__,
+ "bogus register number in debug info: %d", dwarf2);
+
+ return dwarf2_to_gdb[dwarf2];
+}
+
static void
mn10300_print_register (const char *name, int regnum, int reg_width)
{
printf_filtered ("%s: ", name);
/* Get the data */
- if (read_relative_register_raw_bytes (regnum, raw_buffer))
+ if (!frame_register_read (selected_frame, regnum, raw_buffer))
{
printf_filtered ("[invalid]");
return;
else
{
int byte;
- if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
for (byte = REGISTER_RAW_SIZE (regnum) - REGISTER_VIRTUAL_SIZE (regnum);
byte < REGISTER_RAW_SIZE (regnum);
set_gdbarch_max_register_virtual_size (gdbarch, 4);
set_gdbarch_register_virtual_size (gdbarch, mn10300_register_virtual_size);
set_gdbarch_register_virtual_type (gdbarch, mn10300_register_virtual_type);
+ set_gdbarch_dwarf2_reg_to_regnum (gdbarch, mn10300_dwarf2_reg_to_regnum);
set_gdbarch_do_registers_info (gdbarch, mn10300_do_registers_info);
+ set_gdbarch_sp_regnum (gdbarch, 8);
+ set_gdbarch_pc_regnum (gdbarch, 9);
set_gdbarch_fp_regnum (gdbarch, 31);
+ set_gdbarch_virtual_frame_pointer (gdbarch, mn10300_virtual_frame_pointer);
/* Breakpoints. */
set_gdbarch_breakpoint_from_pc (gdbarch, mn10300_breakpoint_from_pc);
set_gdbarch_frame_chain_valid (gdbarch, generic_file_frame_chain_valid);
set_gdbarch_saved_pc_after_call (gdbarch, mn10300_saved_pc_after_call);
set_gdbarch_init_extra_frame_info (gdbarch, mn10300_init_extra_frame_info);
+ set_gdbarch_init_frame_pc (gdbarch, init_frame_pc_noop);
set_gdbarch_frame_init_saved_regs (gdbarch, mn10300_frame_init_saved_regs);
set_gdbarch_frame_chain (gdbarch, mn10300_frame_chain);
set_gdbarch_frame_saved_pc (gdbarch, mn10300_frame_saved_pc);
/* Calling functions in the inferior from GDB. */
set_gdbarch_call_dummy_p (gdbarch, 1);
- set_gdbarch_call_dummy_breakpoint_offset_p (gdbarch, 0);
+ set_gdbarch_call_dummy_breakpoint_offset_p (gdbarch, 1);
+ set_gdbarch_call_dummy_breakpoint_offset (gdbarch, 0);
set_gdbarch_call_dummy_stack_adjust_p (gdbarch, 0);
set_gdbarch_call_dummy_location (gdbarch, AT_ENTRY_POINT);
set_gdbarch_call_dummy_address (gdbarch, entry_point_address);