/* Target communications support for Macraigor Systems' On-Chip Debugging
- Copyright 1996, 1997 Free Software Foundation, Inc.
+
+ Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002 Free Software
+ Foundation, Inc.
This file is part of GDB.
#include "bfd.h"
#include "symfile.h"
#include "target.h"
-#include "wait.h"
#include "gdbcmd.h"
#include "objfiles.h"
#include "gdb-stabs.h"
-#include "dcache.h"
#include <sys/types.h>
#include <signal.h>
#include "serial.h"
#include "ocd.h"
+#include "regcache.h"
/* Prototypes for local functions */
-static int ocd_read_bytes PARAMS ((CORE_ADDR memaddr,
- char *myaddr, int len));
+static int ocd_read_bytes (CORE_ADDR memaddr, char *myaddr, int len);
-static int ocd_start_remote PARAMS ((PTR dummy));
+static int ocd_start_remote (PTR dummy);
-static int readchar PARAMS ((int timeout));
+static int readchar (int timeout);
-static void reset_packet PARAMS ((void));
+static void reset_packet (void);
-static void output_packet PARAMS ((void));
+static void output_packet (void);
-static int get_quoted_char PARAMS ((int timeout));
+static int get_quoted_char (int timeout);
-static void put_quoted_char PARAMS ((int c));
+static void put_quoted_char (int c);
-static void ocd_interrupt PARAMS ((int signo));
+static void ocd_interrupt (int signo);
-static void ocd_interrupt_twice PARAMS ((int signo));
+static void ocd_interrupt_twice (int signo);
-static void interrupt_query PARAMS ((void));
+static void interrupt_query (void);
-static unsigned char *ocd_do_command PARAMS ((int cmd, int *statusp, int *lenp));
+static unsigned char *ocd_do_command (int cmd, int *statusp, int *lenp);
-static void ocd_put_packet PARAMS ((unsigned char *packet, int pktlen));
+static void ocd_put_packet (unsigned char *packet, int pktlen);
-static unsigned char *ocd_get_packet PARAMS ((int cmd, int *pktlen, int timeout));
+static unsigned char *ocd_get_packet (int cmd, int *pktlen, int timeout);
static struct target_ops *current_ops = NULL;
/* Descriptor for I/O to remote machine. Initialize it to NULL so that
ocd_open knows that we don't have a file open when the program
starts. */
-static serial_t ocd_desc = NULL;
+static struct serial *ocd_desc = NULL;
\f
void
-ocd_error (s, error_code)
- char *s;
- int error_code;
+ocd_error (char *s, int error_code)
{
char buf[100];
/* Return nonzero if the thread TH is still alive on the remote system. */
int
-ocd_thread_alive (th)
- int th;
+ocd_thread_alive (ptid_t th)
{
return 1;
}
/* ARGSUSED */
void
-ocd_close (quitting)
- int quitting;
+ocd_close (int quitting)
{
if (ocd_desc)
- SERIAL_CLOSE (ocd_desc);
+ serial_close (ocd_desc);
ocd_desc = NULL;
}
/* Stub for catch_errors. */
static int
-ocd_start_remote (dummy)
- PTR dummy;
+ocd_start_remote (PTR dummy)
{
unsigned char buf[10], *p;
int pktlen;
target_type = *(enum ocd_target_type *) dummy;
- immediate_quit = 1; /* Allow user to interrupt it */
+ immediate_quit++; /* Allow user to interrupt it */
- SERIAL_SEND_BREAK (ocd_desc); /* Wake up the wiggler */
+ serial_send_break (ocd_desc); /* Wake up the wiggler */
speed = 80; /* Divide clock by 4000 */
ocd_error ("OCD_SET_CTL_FLAGS:", error_code);
#endif
- immediate_quit = 0;
+ immediate_quit--;
/* This is really the job of start_remote however, that makes an assumption
that the target is about to print out a status message of some sort. That
/* Open a connection to a remote debugger.
NAME is the filename used for communication. */
-static DCACHE *ocd_dcache;
-
void
-ocd_open (name, from_tty, target_type, ops)
- char *name;
- int from_tty;
- enum ocd_target_type target_type;
- struct target_ops *ops;
+ocd_open (char *name, int from_tty, enum ocd_target_type target_type,
+ struct target_ops *ops)
{
unsigned char buf[10], *p;
int pktlen;
unpush_target (current_ops);
- ocd_dcache = dcache_init (ocd_read_bytes, ocd_write_bytes);
-
- if (strncmp (name, "wiggler", 7) == 0)
- {
- ocd_desc = SERIAL_OPEN ("ocd");
- if (!ocd_desc)
- perror_with_name (name);
-
- buf[0] = OCD_LOG_FILE;
- buf[1] = 1; /* open new or overwrite existing WIGGLERS.LOG */
- ocd_put_packet (buf, 2);
- p = ocd_get_packet (buf[0], &pktlen, remote_timeout);
-
- buf[0] = OCD_SET_CONNECTION;
- buf[1] = 0x01; /* atoi (name[11]); */
- ocd_put_packet (buf, 2);
- p = ocd_get_packet (buf[0], &pktlen, remote_timeout);
- }
- else
- /* not using Wigglers.dll */
- {
- ocd_desc = SERIAL_OPEN (name);
- if (!ocd_desc)
- perror_with_name (name);
- }
+ ocd_desc = serial_open (name);
+ if (!ocd_desc)
+ perror_with_name (name);
if (baud_rate != -1)
{
- if (SERIAL_SETBAUDRATE (ocd_desc, baud_rate))
+ if (serial_setbaudrate (ocd_desc, baud_rate))
{
- SERIAL_CLOSE (ocd_desc);
+ serial_close (ocd_desc);
perror_with_name (name);
}
}
- SERIAL_RAW (ocd_desc);
+ serial_raw (ocd_desc);
/* If there is something sitting in the buffer we might take it as a
response to a command, which would be bad. */
- SERIAL_FLUSH_INPUT (ocd_desc);
+ serial_flush_input (ocd_desc);
if (from_tty)
{
variables, especially since GDB will someday have a notion of debugging
several processes. */
- inferior_pid = 42000;
+ inferior_ptid = pid_to_ptid (42000);
/* Start the remote connection; if error (0), discard this target.
In particular, if the user quits, be sure to discard it
(we'd be in an inconsistent state otherwise). */
die when it hits one. */
void
-ocd_detach (args, from_tty)
- char *args;
- int from_tty;
+ocd_detach (char *args, int from_tty)
{
if (args)
error ("Argument given to \"detach\" when remotely debugging.");
/* Tell the remote machine to resume. */
void
-ocd_resume (pid, step, siggnal)
- int pid, step;
- enum target_signal siggnal;
+ocd_resume (ptid_t ptid, int step, enum target_signal siggnal)
{
int pktlen;
- dcache_flush (ocd_dcache);
-
if (step)
ocd_do_command (OCD_STEP, &last_run_status, &pktlen);
else
}
\f
void
-ocd_stop ()
+ocd_stop (void)
{
int status;
int pktlen;
packet. */
static void
-ocd_interrupt (signo)
- int signo;
+ocd_interrupt (int signo)
{
/* If this doesn't work, try more severe steps. */
signal (signo, ocd_interrupt_twice);
/* The user typed ^C twice. */
static void
-ocd_interrupt_twice (signo)
- int signo;
+ocd_interrupt_twice (int signo)
{
signal (signo, ofunc);
/* Ask the user what to do when an interrupt is received. */
static void
-interrupt_query ()
+interrupt_query (void)
{
target_terminal_ours ();
Give up (and stop debugging it)? "))
{
target_mourn_inferior ();
- return_to_top_level (RETURN_QUIT);
+ throw_exception (RETURN_QUIT);
}
target_terminal_inferior ();
means in the case of this target). */
int
-ocd_wait ()
+ocd_wait (void)
{
unsigned char *p;
int error_code;
Returns a pointer to a static array containing the register contents. */
unsigned char *
-ocd_read_bdm_registers (first_bdm_regno, last_bdm_regno, reglen)
- int first_bdm_regno;
- int last_bdm_regno;
- int *reglen;
+ocd_read_bdm_registers (int first_bdm_regno, int last_bdm_regno, int *reglen)
{
unsigned char buf[10];
int i;
/* Read register BDM_REGNO and returns its value ala read_register() */
CORE_ADDR
-ocd_read_bdm_register (bdm_regno)
- int bdm_regno;
+ocd_read_bdm_register (int bdm_regno)
{
int reglen;
unsigned char *p;
}
void
-ocd_write_bdm_registers (first_bdm_regno, regptr, reglen)
- int first_bdm_regno;
- unsigned char *regptr;
- int reglen;
+ocd_write_bdm_registers (int first_bdm_regno, unsigned char *regptr, int reglen)
{
unsigned char *buf;
unsigned char *p;
}
void
-ocd_write_bdm_register (bdm_regno, reg)
- int bdm_regno;
- CORE_ADDR reg;
+ocd_write_bdm_register (int bdm_regno, CORE_ADDR reg)
{
unsigned char buf[4];
}
\f
void
-ocd_prepare_to_store ()
+ocd_prepare_to_store (void)
{
}
\f
static int write_mem_command = OCD_WRITE_MEM;
int
-ocd_write_bytes (memaddr, myaddr, len)
- CORE_ADDR memaddr;
- char *myaddr;
- int len;
+ocd_write_bytes (CORE_ADDR memaddr, char *myaddr, int len)
{
char buf[256 + 10];
unsigned char *p;
Returns number of bytes transferred, or 0 for error. */
static int
-ocd_read_bytes (memaddr, myaddr, len)
- CORE_ADDR memaddr;
- char *myaddr;
- int len;
+ocd_read_bytes (CORE_ADDR memaddr, char *myaddr, int len)
{
char buf[256 + 10];
unsigned char *p;
\f
/* Read or write LEN bytes from inferior memory at MEMADDR, transferring
to or from debugger address MYADDR. Write to inferior if SHOULD_WRITE is
- nonzero. Returns length of data written or read; 0 for error. */
+ nonzero. Returns length of data written or read; 0 for error. TARGET
+ is ignored. */
/* ARGSUSED */
int
-ocd_xfer_memory (memaddr, myaddr, len, should_write, target)
- CORE_ADDR memaddr;
- char *myaddr;
- int len;
- int should_write;
- struct target_ops *target; /* ignored */
+ocd_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int should_write,
+ struct mem_attrib *attrib, struct target_ops *target)
{
- return dcache_xfer_memory (ocd_dcache, memaddr, myaddr, len, should_write);
+ int res;
+
+ if (should_write)
+ res = ocd_write_bytes (memaddr, myaddr, len);
+ else
+ res = ocd_read_bytes (memaddr, myaddr, len);
+
+ return res;
}
\f
void
-ocd_files_info (ignore)
- struct target_ops *ignore;
+ocd_files_info (struct target_ops *ignore)
{
puts_filtered ("Debugging a target over a serial line.\n");
}
/* Read a single character from the remote side, handling wierd errors. */
static int
-readchar (timeout)
- int timeout;
+readchar (int timeout)
{
int ch;
- ch = SERIAL_READCHAR (ocd_desc, timeout);
+ ch = serial_readchar (ocd_desc, timeout);
switch (ch)
{
mistaken for real data). */
static int
-get_quoted_char (timeout)
- int timeout;
+get_quoted_char (int timeout)
{
int ch;
static unsigned char pkt[256 * 2 + 10], *pktp; /* Worst case */
static void
-reset_packet ()
+reset_packet (void)
{
pktp = pkt;
}
static void
-output_packet ()
+output_packet (void)
{
- if (SERIAL_WRITE (ocd_desc, pkt, pktp - pkt))
+ if (serial_write (ocd_desc, pkt, pktp - pkt))
perror_with_name ("output_packet: write failed");
reset_packet ();
through untouched. */
static void
-put_quoted_char (c)
- int c;
+put_quoted_char (int c)
{
switch (c)
{
byte count. */
static void
-stu_put_packet (buf, len)
- unsigned char *buf;
- int len;
+stu_put_packet (unsigned char *buf, int len)
{
unsigned char checksum;
unsigned char c;
if (len == 0 || len > 256)
- abort (); /* Can't represent 0 length packet */
+ internal_error (__FILE__, __LINE__, "failed internal consistency check"); /* Can't represent 0 length packet */
reset_packet ();
byte count. */
static void
-ocd_put_packet (buf, len)
- unsigned char *buf;
- int len;
+ocd_put_packet (unsigned char *buf, int len)
{
unsigned char checksum;
unsigned char c;
}
*packet_ptr++ = -checksum;
- if (SERIAL_WRITE (ocd_desc, packet, packet_ptr - packet))
+ if (serial_write (ocd_desc, packet, packet_ptr - packet))
perror_with_name ("output_packet: write failed");
}
#endif
*/
static unsigned char *
-stu_get_packet (cmd, lenp, timeout)
- unsigned char cmd;
- int *lenp;
+stu_get_packet (unsigned char cmd, int *lenp, int timeout)
{
int ch;
int len;
*/
static unsigned char *
-ocd_get_packet (cmd, lenp, timeout)
- int cmd;
- int *lenp;
+ocd_get_packet (int cmd, int *lenp, int timeout)
{
int ch;
int len;
following the error code. */
static unsigned char *
-ocd_do_command (cmd, statusp, lenp)
- int cmd;
- int *statusp;
- int *lenp;
+ocd_do_command (int cmd, int *statusp, int *lenp)
{
unsigned char buf[100], *p;
int status, error_code;
}
\f
void
-ocd_kill ()
+ocd_kill (void)
{
/* For some mysterious reason, wait_for_inferior calls kill instead of
mourn after it gets TARGET_WAITKIND_SIGNALLED. Work around it. */
}
void
-ocd_mourn ()
+ocd_mourn (void)
{
unpush_target (current_ops);
generic_mourn_inferior ();
the program at that point. */
void
-ocd_create_inferior (exec_file, args, env)
- char *exec_file;
- char *args;
- char **env;
+ocd_create_inferior (char *exec_file, char *args, char **env)
{
if (args && (*args != '\000'))
error ("Args are not supported by BDM.");
}
void
-ocd_load (args, from_tty)
- char *args;
- int from_tty;
+ocd_load (char *args, int from_tty)
{
generic_load (args, from_tty);
- inferior_pid = 0;
+ inferior_ptid = null_ptid;
/* This is necessary because many things were based on the PC at the time that
we attached to the monitor, which is no longer valid now that we have loaded
/* BDM (at least on CPU32) uses a different breakpoint */
int
-ocd_insert_breakpoint (addr, contents_cache)
- CORE_ADDR addr;
- char *contents_cache;
+ocd_insert_breakpoint (CORE_ADDR addr, char *contents_cache)
{
static char break_insn[] = BDM_BREAKPOINT;
int val;
}
int
-ocd_remove_breakpoint (addr, contents_cache)
- CORE_ADDR addr;
- char *contents_cache;
+ocd_remove_breakpoint (CORE_ADDR addr, char *contents_cache)
{
static char break_insn[] = BDM_BREAKPOINT;
int val;
}
static void
-bdm_command (args, from_tty)
- char *args;
- int from_tty;
+bdm_command (char *args, int from_tty)
{
error ("bdm command must be followed by `reset'");
}
static void
-bdm_reset_command (args, from_tty)
- char *args;
- int from_tty;
+bdm_reset_command (char *args, int from_tty)
{
int status, pktlen;
error ("Not connected to OCD device.");
ocd_do_command (OCD_RESET, &status, &pktlen);
- dcache_flush (ocd_dcache);
+ dcache_invalidate (target_dcache);
registers_changed ();
}
static void
-bdm_restart_command (args, from_tty)
- char *args;
- int from_tty;
+bdm_restart_command (char *args, int from_tty)
{
int status, pktlen;
generic_load from trying to set the PC. */
static void
-noop_store_registers (regno)
- int regno;
+noop_store_registers (int regno)
{
}
static void
-bdm_update_flash_command (args, from_tty)
- char *args;
- int from_tty;
+bdm_update_flash_command (char *args, int from_tty)
{
int status, pktlen;
struct cleanup *old_chain;
- void (*store_registers_tmp) PARAMS ((int));
+ void (*store_registers_tmp) (int);
if (!ocd_desc)
error ("Not connected to OCD device.");
}
static void
-bdm_read_register_command (args, from_tty)
- char *args;
- int from_tty;
+bdm_read_register_command (char *args, int from_tty)
{
/* XXX repeat should go on to the next register */
}
\f
void
-_initialize_remote_ocd ()
+_initialize_remote_ocd (void)
{
extern struct cmd_list_element *cmdlist;
static struct cmd_list_element *ocd_cmd_list = NULL;