/* Remote debugging interface for Hitachi E7000 ICE, for GDB
- Copyright 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
- Free Software Foundation, Inc.
+
+ Copyright 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+ 2002 Free Software Foundation, Inc.
+
Contributed by Cygnus Support.
Written by Steve Chamberlain for Cygnus Support.
#define SR_REGNUM -1
#endif
-extern void notice_quit (void);
-
extern void report_transfer_performance (unsigned long, time_t, time_t);
extern char *sh_processor_type;
static int e7000_parse_device (char *args, char *dev_name, int baudrate);
/* Variables. */
-static serial_t e7000_desc;
+static struct serial *e7000_desc;
/* Allow user to chose between using hardware breakpoints or memory. */
static int use_hard_breakpoints = 0; /* use sw breakpoints by default */
if (remote_debug)
printf_unfiltered ("Sending %s\n", buf);
- if (SERIAL_WRITE (e7000_desc, buf, strlen (buf)))
- fprintf_unfiltered (gdb_stderr, "SERIAL_WRITE failed: %s\n", safe_strerror (errno));
+ if (serial_write (e7000_desc, buf, strlen (buf)))
+ fprintf_unfiltered (gdb_stderr, "serial_write failed: %s\n", safe_strerror (errno));
/* And expect to see it echoed, unless using the pc interface */
#if 0
char b[1];
b[0] = x;
- SERIAL_WRITE (e7000_desc, b, 1);
+ serial_write (e7000_desc, b, 1);
}
static void
write_e7000 (char *s)
{
- SERIAL_WRITE (e7000_desc, s, strlen (s));
+ serial_write (e7000_desc, s, strlen (s));
}
static int
do
{
- c = SERIAL_READCHAR (e7000_desc, timeout);
+ c = serial_readchar (e7000_desc, timeout);
}
while (c > 127);
while (1)
{
c = readchar (timeout);
-#if 0
- notice_quit ();
- if (quit_flag == 1)
- {
- if (ctrl_c)
- {
- putchar_e7000 (CTRLC);
- --ctrl_c;
- }
- else
- {
- quit ();
- }
- }
-#endif
if (echo)
{
push_target (&e7000_ops);
- e7000_desc = SERIAL_OPEN (dev_name);
+ e7000_desc = serial_open (dev_name);
if (!e7000_desc)
perror_with_name (dev_name);
- SERIAL_SETBAUDRATE (e7000_desc, baudrate);
- SERIAL_RAW (e7000_desc);
+ if (serial_setbaudrate (e7000_desc, baudrate))
+ {
+ serial_close (e7000_desc);
+ perror_with_name (dev_name);
+ }
+ serial_raw (e7000_desc);
#ifdef GDB_TARGET_IS_H8300
h8300hmode = 1;
{
if (e7000_desc)
{
- SERIAL_CLOSE (e7000_desc);
+ serial_close (e7000_desc);
e7000_desc = 0;
}
}
/* Tell the remote machine to resume. */
static void
-e7000_resume (int pid, int step, enum target_signal sigal)
+e7000_resume (ptid_t ptid, int step, enum target_signal sigal)
{
if (step)
puts_e7000debug ("S\r");
int thischar = nextchar ();
+ if (want == NULL)
+ internal_error (__FILE__, __LINE__, "Register set not selected.");
+
while (*want)
{
switch (*want)
e7000_fetch_registers (void)
{
int regno;
- char *wanted;
+ char *wanted = NULL;
puts_e7000debug ("R\r");
{
if (regno <= 7)
{
- sprintf (buf, ".ER%d %lx\r", regno, read_register (regno));
+ sprintf (buf, ".ER%d %s\r", regno, phex_nz (read_register (regno), 0));
puts_e7000debug (buf);
}
else if (regno == PC_REGNUM)
{
- sprintf (buf, ".PC %lx\r", read_register (regno));
+ sprintf (buf, ".PC %s\r", phex_nz (read_register (regno), 0));
puts_e7000debug (buf);
}
#ifdef CCR_REGNUM
else if (regno == CCR_REGNUM)
{
- sprintf (buf, ".CCR %lx\r", read_register (regno));
+ sprintf (buf, ".CCR %s\r", phex_nz (read_register (regno), 0));
puts_e7000debug (buf);
}
#endif
{
if (regno == PC_REGNUM)
{
- sprintf (buf, ".PC %lx\r", read_register (regno));
+ sprintf (buf, ".PC %s\r", phex_nz (read_register (regno), 0));
puts_e7000debug (buf);
}
else if (regno == SR_REGNUM)
{
- sprintf (buf, ".SR %lx\r", read_register (regno));
+ sprintf (buf, ".SR %s\r", phex_nz (read_register (regno), 0));
puts_e7000debug (buf);
}
else if (regno == PR_REGNUM)
{
- sprintf (buf, ".PR %lx\r", read_register (regno));
+ sprintf (buf, ".PR %s\r", phex_nz (read_register (regno), 0));
puts_e7000debug (buf);
}
else if (regno == GBR_REGNUM)
{
- sprintf (buf, ".GBR %lx\r", read_register (regno));
+ sprintf (buf, ".GBR %s\r", phex_nz (read_register (regno), 0));
puts_e7000debug (buf);
}
else if (regno == VBR_REGNUM)
{
- sprintf (buf, ".VBR %lx\r", read_register (regno));
+ sprintf (buf, ".VBR %s\r", phex_nz (read_register (regno), 0));
puts_e7000debug (buf);
}
else if (regno == MACH_REGNUM)
{
- sprintf (buf, ".MACH %lx\r", read_register (regno));
+ sprintf (buf, ".MACH %s\r", phex_nz (read_register (regno), 0));
puts_e7000debug (buf);
}
else if (regno == MACL_REGNUM)
{
- sprintf (buf, ".MACL %lx\r", read_register (regno));
+ sprintf (buf, ".MACL %s\r", phex_nz (read_register (regno), 0));
puts_e7000debug (buf);
}
else
{
- sprintf (buf, ".R%d %lx\r", regno, read_register (regno));
+ sprintf (buf, ".R%d %s\r", regno, phex_nz (read_register (regno), 0));
puts_e7000debug (buf);
}
}
if (((memaddr + i) & 3) == 0 && (i + 3 < len))
{
/* Can be done with a long word */
- sprintf (buf, "m %lx %x%02x%02x%02x;l\r",
- memaddr + i,
+ sprintf (buf, "m %s %x%02x%02x%02x;l\r",
+ paddr_nz (memaddr + i),
myaddr[i], myaddr[i + 1], myaddr[i + 2], myaddr[i + 3]);
puts_e7000debug (buf);
i += 3;
}
else
{
- sprintf (buf, "m %lx %x\r", memaddr + i, myaddr[i]);
+ sprintf (buf, "m %s %x\r", paddr_nz (memaddr + i), myaddr[i]);
puts_e7000debug (buf);
}
}
compose[where++] = '\n';
compose[where++] = 0;
- SERIAL_WRITE (e7000_desc, compose, where);
+ serial_write (e7000_desc, compose, where);
j = readchar (0);
if (j == -1)
{
return 0;
}
- sprintf (buf, "m %lx;l\r", memaddr);
+ sprintf (buf, "m %s;l\r", paddr_nz (memaddr));
puts_e7000debug (buf);
for (count = 0; count < len; count += 4)
return 0;
}
- sprintf (buf, "d %lx %lx\r", memaddr, memaddr + len - 1);
+ sprintf (buf, "d %s %s\r", paddr_nz (memaddr), paddr_nz (memaddr + len - 1));
puts_e7000debug (buf);
count = 0;
Returns the number of bytes transferred. */
static int
-e7000_xfer_inferior_memory (CORE_ADDR memaddr, char *myaddr,
- int len, int write,
- struct mem_attrib *attrib ATTRIBUTE_UNUSED,
- struct target_ops *target ATTRIBUTE_UNUSED)
+e7000_xfer_inferior_memory (CORE_ADDR memaddr, char *myaddr, int len,
+ int write, struct mem_attrib *attrib,
+ struct target_ops *target)
{
if (write)
return e7000_write_inferior_memory (memaddr, myaddr, len);
section_size = bfd_get_section_size_before_reloc (section);
if (!quiet)
- printf_filtered ("[Loading section %s at 0x%x (%ud bytes)]\n",
+ printf_filtered ("[Loading section %s at 0x%s (%s bytes)]\n",
bfd_get_section_name (pbfd, section),
- section_address,
- section_size);
+ paddr_nz (section_address),
+ paddr_u (section_size));
fptr = 0;
bfd_get_section_contents (pbfd, section, buf + 10, fptr, count);
- if (SERIAL_WRITE (e7000_desc, buf, count + 10))
+ if (serial_write (e7000_desc, buf, count + 10))
fprintf_unfiltered (gdb_stderr,
- "e7000_load: SERIAL_WRITE failed: %s\n",
+ "e7000_load: serial_write failed: %s\n",
safe_strerror (errno));
expect ("OK");
if (exec_bfd)
write_pc (bfd_get_start_address (exec_bfd));
- inferior_pid = 0; /* No process now */
+ inferior_ptid = null_ptid; /* No process now */
/* This is necessary because many things were based on the PC at the time that
we attached to the monitor, which is no longer valid now that we have loaded
entry = bfd_get_start_address (pbfd);
if (!quiet)
- printf_unfiltered ("[Starting %s at 0x%x]\n", filename, entry);
+ printf_unfiltered ("[Starting %s at 0x%s]\n", filename, paddr_nz (entry));
/* start_routine (entry); */
}
#ifdef HARD_BREAKPOINTS
if (BC_BREAKPOINTS)
{
- sprintf (buf, "BC%d A=%lx\r", i + 1, addr);
+ sprintf (buf, "BC%d A=%s\r", i + 1, paddr_nz (addr));
puts_e7000debug (buf);
}
else
{
- sprintf (buf, "B %lx\r", addr);
+ sprintf (buf, "B %s\r", paddr_nz (addr));
puts_e7000debug (buf);
}
#else
}
else
{
- sprintf (buf, "B - %lx\r", addr);
+ sprintf (buf, "B - %s\r", paddr_nz (addr));
puts_e7000debug (buf);
}
expect_prompt ();
#else
- sprintf (buf, "B - %lx\r", addr);
+ sprintf (buf, "B - %s\r", paddr_nz (addr));
puts_e7000debug (buf);
expect_prompt ();
return 0;
}
-
- warning ("Can't find breakpoint associated with 0x%lx\n", addr);
+
+ warning ("Can't find breakpoint associated with 0x%s\n", paddr_nz (addr));
return 1;
}
REGISTER_RAW_SIZE (PC_REGNUM),
read_register (PC_REGNUM) - 2);
supply_register (PC_REGNUM, buf);
- sprintf (buf2, ".PC %lx\r", read_register (PC_REGNUM));
+ sprintf (buf2, ".PC %s\r", phex_nz (read_register (PC_REGNUM), 0));
puts_e7000debug (buf2);
}
/* Wait until the remote machine stops, then return, storing status in
STATUS just as `wait' would. */
-static int
-e7000_wait (int pid, struct target_waitstatus *status)
+static ptid_t
+e7000_wait (ptid_t ptid, struct target_waitstatus *status)
{
int stop_reason;
int regno;
int running_count = 0;
int had_sleep = 0;
int loop = 1;
- char *wanted_nopc;
+ char *wanted_nopc = NULL;
/* Then echo chars until PC= string seen */
gch (); /* Drop cr */
internal_error (__FILE__, __LINE__, "failed internal consistency check");
}
- return 0;
+ return inferior_ptid;
}
/* Stop the running program. */