/* Remote target communications for serial-line targets in custom GDB protocol
- Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
- 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
+ Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
+ 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor,
- Boston, MA 02110-1301, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
/* See the GDB User Guide for details of the GDB remote protocol. */
#include "solib.h"
#include "cli/cli-decode.h"
#include "cli/cli-setshow.h"
+#include "target-descriptions.h"
#include <ctype.h>
#include <sys/time.h>
#include "gdbcore.h" /* for exec_bfd */
#include "remote-fileio.h"
+#include "gdb/fileio.h"
+#include "gdb_stat.h"
#include "memory-map.h"
static void cleanup_sigint_signal_handler (void *dummy);
static void initialize_sigint_signal_handler (void);
static int getpkt_sane (char **buf, long *sizeof_buf, int forever);
+static int getpkt_or_notif_sane (char **buf, long *sizeof_buf,
+ int forever);
static void handle_remote_sigint (int);
static void handle_remote_sigint_twice (int);
static void async_remote_interrupt (gdb_client_data);
void async_remote_interrupt_twice (gdb_client_data);
-static void build_remote_gdbarch_data (void);
-
static void remote_files_info (struct target_ops *ignore);
-static void remote_prepare_to_store (void);
+static void remote_prepare_to_store (struct regcache *regcache);
-static void remote_fetch_registers (int regno);
+static void remote_fetch_registers (struct regcache *regcache, int regno);
static void remote_resume (ptid_t ptid, int step,
enum target_signal siggnal);
-static void remote_async_resume (ptid_t ptid, int step,
- enum target_signal siggnal);
static void remote_open (char *name, int from_tty);
-static void remote_async_open (char *name, int from_tty);
static void extended_remote_open (char *name, int from_tty);
-static void extended_remote_async_open (char *name, int from_tty);
-static void remote_open_1 (char *, int, struct target_ops *, int extended_p,
- int async_p);
+static void remote_open_1 (char *, int, struct target_ops *, int extended_p);
static void remote_close (int quitting);
-static void remote_store_registers (int regno);
+static void remote_store_registers (struct regcache *regcache, int regno);
-static void remote_mourn (void);
-static void remote_async_mourn (void);
+static void remote_mourn (struct target_ops *ops);
static void extended_remote_restart (void);
-static void extended_remote_mourn (void);
+static void extended_remote_mourn (struct target_ops *);
static void remote_mourn_1 (struct target_ops *);
static int readchar (int timeout);
static ptid_t remote_wait (ptid_t ptid,
- struct target_waitstatus *status);
-static ptid_t remote_async_wait (ptid_t ptid,
- struct target_waitstatus *status);
+ struct target_waitstatus *status);
static void remote_kill (void);
-static void remote_async_kill (void);
static int tohex (int nib);
-static void remote_detach (char *args, int from_tty);
+static int remote_can_async_p (void);
+
+static int remote_is_async_p (void);
+
+static void remote_async (void (*callback) (enum inferior_event_type event_type,
+ void *context), void *context);
+
+static int remote_async_mask (int new_mask);
+
+static void remote_detach (struct target_ops *ops, char *args, int from_tty);
static void remote_interrupt (int signo);
static void interrupt_query (void);
-static void set_thread (int, int);
+static void set_general_thread (struct ptid ptid);
+static void set_continue_thread (struct ptid ptid);
static int remote_thread_alive (ptid_t);
static void init_extended_remote_ops (void);
-static void remote_stop (void);
+static void remote_stop (ptid_t);
static int ishex (int ch, int *val);
static void remote_find_new_threads (void);
-static void record_currthread (int currthread);
+static void record_currthread (ptid_t currthread);
static int fromhex (int a);
struct cmd_list_element *c,
const char *value);
+static char *write_ptid (char *buf, const char *endbuf, ptid_t ptid);
+static ptid_t read_ptid (char *buf, char **obuf);
+
+static void remote_query_supported (void);
+
+static void remote_check_symbols (struct objfile *objfile);
+
void _initialize_remote (void);
+struct stop_reply;
+static struct stop_reply *stop_reply_xmalloc (void);
+static void stop_reply_xfree (struct stop_reply *);
+static void do_stop_reply_xfree (void *arg);
+static void remote_parse_stop_reply (char *buf, struct stop_reply *);
+static void push_stop_reply (struct stop_reply *);
+static void remote_get_pending_stop_replies (void);
+static void discard_pending_stop_replies (int pid);
+static int peek_stop_reply (ptid_t ptid);
+
+static void remote_async_inferior_event_handler (gdb_client_data);
+static void remote_async_get_pending_events_handler (gdb_client_data);
+
+static void remote_terminal_ours (void);
+
+/* The non-stop remote protocol provisions for one pending stop reply.
+ This is where we keep it until it is acknowledged. */
+
+static struct stop_reply *pending_stop_reply = NULL;
+
+/* For "remote". */
+
+static struct cmd_list_element *remote_cmdlist;
+
/* For "set remote" and "show remote". */
static struct cmd_list_element *remote_set_cmdlist;
a buffer in the stub), this will be set to that packet size.
Otherwise zero, meaning to use the guessed size. */
long explicit_packet_size;
+
+ /* remote_wait is normally called when the target is running and
+ waits for a stop reply packet. But sometimes we need to call it
+ when the target is already stopped. We can send a "?" packet
+ and have remote_wait read the response. Or, if we already have
+ the response, we can stash it in BUF and tell remote_wait to
+ skip calling getpkt. This flag is set when BUF contains a
+ stop reply packet and the target is not waiting. */
+ int cached_wait_status;
+
+ /* True, if in no ack mode. That is, neither GDB nor the stub will
+ expect acks from each other. The connection is assumed to be
+ reliable. */
+ int noack_mode;
+
+ /* True if we're connected in extended remote mode. */
+ int extended;
+
+ /* True if the stub reported support for multi-process
+ extensions. */
+ int multi_process_aware;
+
+ /* True if we resumed the target and we're waiting for the target to
+ stop. In the mean time, we can't start another command/query.
+ The remote server wouldn't be ready to process it, so we'd
+ timeout waiting for a reply that would never come and eventually
+ we'd close the connection. This can happen in asynchronous mode
+ because we allow GDB commands while the target is running. */
+ int waiting_for_stop_reply;
+
+ /* True if the stub reports support for non-stop mode. */
+ int non_stop_aware;
+
+ /* True if the stub reports support for vCont;t. */
+ int support_vCont_t;
};
+/* Returns true if the multi-process extensions are in effect. */
+static int
+remote_multi_process_p (struct remote_state *rs)
+{
+ return rs->extended && rs->multi_process_aware;
+}
+
/* This data could be associated with a target, but we do not always
have access to the current target when we need it, so for now it is
static. This will be fine for as long as only one target is in use
long regnum; /* GDB's internal register number. */
LONGEST pnum; /* Remote protocol register number. */
int in_g_packet; /* Always part of G packet. */
- /* long size in bytes; == register_size (current_gdbarch, regnum);
+ /* long size in bytes; == register_size (target_gdbarch, regnum);
+ at present. */
+ /* char *name; == gdbarch_register_name (target_gdbarch, regnum);
at present. */
- /* char *name; == REGISTER_NAME (regnum); at present. */
};
struct remote_arch_state
long sizeof_g_packet;
/* Description of the remote protocol registers indexed by REGNUM
- (making an array NUM_REGS in size). */
+ (making an array gdbarch_num_regs in size). */
struct packet_reg *regs;
/* This is the size (in chars) of the first response to the ``g''
static struct remote_arch_state *
get_remote_arch_state (void)
{
- return gdbarch_data (current_gdbarch, remote_gdbarch_data_handle);
+ return gdbarch_data (target_gdbarch, remote_gdbarch_data_handle);
}
/* Fetch the global remote target state. */
rsa = GDBARCH_OBSTACK_ZALLOC (gdbarch, struct remote_arch_state);
- /* Assume a 1:1 regnum<->pnum table. */
- rsa->regs = GDBARCH_OBSTACK_CALLOC (gdbarch, NUM_REGS, struct packet_reg);
- for (regnum = 0; regnum < NUM_REGS; regnum++)
+ /* Use the architecture to build a regnum<->pnum table, which will be
+ 1:1 unless a feature set specifies otherwise. */
+ rsa->regs = GDBARCH_OBSTACK_CALLOC (gdbarch,
+ gdbarch_num_regs (gdbarch),
+ struct packet_reg);
+ for (regnum = 0; regnum < gdbarch_num_regs (gdbarch); regnum++)
{
struct packet_reg *r = &rsa->regs[regnum];
- r->pnum = regnum;
+
+ if (register_size (gdbarch, regnum) == 0)
+ /* Do not try to fetch zero-sized (placeholder) registers. */
+ r->pnum = -1;
+ else
+ r->pnum = gdbarch_remote_register_number (gdbarch, regnum);
+
r->regnum = regnum;
}
with a remote protocol number, in order of ascending protocol
number. */
- remote_regs = alloca (NUM_REGS * sizeof (struct packet_reg *));
- for (num_remote_regs = 0, regnum = 0; regnum < NUM_REGS; regnum++)
+ remote_regs = alloca (gdbarch_num_regs (gdbarch)
+ * sizeof (struct packet_reg *));
+ for (num_remote_regs = 0, regnum = 0;
+ regnum < gdbarch_num_regs (gdbarch);
+ regnum++)
if (rsa->regs[regnum].pnum != -1)
remote_regs[num_remote_regs++] = &rsa->regs[regnum];
{
remote_regs[regnum]->in_g_packet = 1;
remote_regs[regnum]->offset = offset;
- offset += register_size (current_gdbarch, remote_regs[regnum]->regnum);
+ offset += register_size (gdbarch, remote_regs[regnum]->regnum);
}
/* Record the maximum possible size of the g packet - it may turn out
static struct packet_reg *
packet_reg_from_regnum (struct remote_arch_state *rsa, long regnum)
{
- if (regnum < 0 && regnum >= NUM_REGS)
+ if (regnum < 0 && regnum >= gdbarch_num_regs (target_gdbarch))
return NULL;
else
{
packet_reg_from_pnum (struct remote_arch_state *rsa, LONGEST pnum)
{
int i;
- for (i = 0; i < NUM_REGS; i++)
+ for (i = 0; i < gdbarch_num_regs (target_gdbarch); i++)
{
struct packet_reg *r = &rsa->regs[i];
if (r->pnum == pnum)
static struct target_ops extended_remote_ops;
-/* Temporary target ops. Just like the remote_ops and
- extended_remote_ops, but with asynchronous support. */
-static struct target_ops remote_async_ops;
-
-static struct target_ops extended_async_remote_ops;
+static int remote_async_mask_value = 1;
/* FIXME: cagney/1999-09-23: Even though getpkt was called with
``forever'' still use the normal timeout mechanism. This is
static int remote_address_size;
-/* Tempoary to track who currently owns the terminal. See
- target_async_terminal_* for more details. */
+/* Temporary to track who currently owns the terminal. See
+ remote_terminal_* for more details. */
static int remote_async_terminal_ours_p;
+/* The executable file to use for "run" on the remote side. */
+
+static char *remote_exec_file = "";
+
\f
/* User configurable variables for the number of characters in a
memory read/write packet. MIN (rsa->remote_packet_size,
PACKET_Z2,
PACKET_Z3,
PACKET_Z4,
+ PACKET_vFile_open,
+ PACKET_vFile_pread,
+ PACKET_vFile_pwrite,
+ PACKET_vFile_close,
+ PACKET_vFile_unlink,
PACKET_qXfer_auxv,
+ PACKET_qXfer_features,
+ PACKET_qXfer_libraries,
PACKET_qXfer_memory_map,
+ PACKET_qXfer_spu_read,
+ PACKET_qXfer_spu_write,
PACKET_qGetTLSAddr,
PACKET_qSupported,
PACKET_QPassSignals,
+ PACKET_qSearch_memory,
+ PACKET_vAttach,
+ PACKET_vRun,
+ PACKET_QStartNoAckMode,
+ PACKET_vKill,
PACKET_MAX
};
static int use_threadextra_query;
/* Tokens for use by the asynchronous signal handlers for SIGINT. */
-static void *sigint_remote_twice_token;
-static void *sigint_remote_token;
+static struct async_signal_handler *sigint_remote_twice_token;
+static struct async_signal_handler *sigint_remote_token;
+
+\f
+/* Asynchronous signal handle registered as event loop source for
+ when we have pending events ready to be passed to the core. */
+
+static struct async_event_handler *remote_async_inferior_event_token;
-/* These are pointers to hook functions that may be set in order to
- modify resume/wait behavior for a particular architecture. */
+/* Asynchronous signal handle registered as event loop source for when
+ the remote sent us a %Stop notification. The registered callback
+ will do a vStopped sequence to pull the rest of the events out of
+ the remote side into our event queue. */
-void (*deprecated_target_resume_hook) (void);
-void (*deprecated_target_wait_loop_hook) (void);
+static struct async_event_handler *remote_async_get_pending_events_token;
\f
+static ptid_t magic_null_ptid;
+static ptid_t not_sent_ptid;
+static ptid_t any_thread_ptid;
+
+/* These are the threads which we last sent to the remote system. The
+ TID member will be -1 for all or -2 for not sent yet. */
+
+static ptid_t general_thread;
+static ptid_t continue_thread;
-/* These are the threads which we last sent to the remote system.
- -1 for all or -2 for not sent yet. */
-static int general_thread;
-static int continue_thread;
+static void
+notice_new_inferiors (ptid_t currthread)
+{
+ /* If this is a new thread, add it to GDB's thread list.
+ If we leave it up to WFI to do this, bad things will happen. */
+
+ if (in_thread_list (currthread) && is_exited (currthread))
+ {
+ /* We're seeing an event on a thread id we knew had exited.
+ This has to be a new thread reusing the old id. Add it. */
+ add_thread (currthread);
+ return;
+ }
+
+ if (!in_thread_list (currthread))
+ {
+ if (ptid_equal (pid_to_ptid (ptid_get_pid (currthread)), inferior_ptid))
+ {
+ /* inferior_ptid has no thread member yet. This can happen
+ with the vAttach -> remote_wait,"TAAthread:" path if the
+ stub doesn't support qC. This is the first stop reported
+ after an attach, so this is the main thread. Update the
+ ptid in the thread list. */
+ thread_change_ptid (inferior_ptid, currthread);
+ return;
+ }
+
+ if (ptid_equal (magic_null_ptid, inferior_ptid))
+ {
+ /* inferior_ptid is not set yet. This can happen with the
+ vRun -> remote_wait,"TAAthread:" path if the stub
+ doesn't support qC. This is the first stop reported
+ after an attach, so this is the main thread. Update the
+ ptid in the thread list. */
+ thread_change_ptid (inferior_ptid, currthread);
+ return;
+ }
+
+ /* When connecting to a target remote, or to a target
+ extended-remote which already was debugging an inferior, we
+ may not know about it yet. Add it before adding its child
+ thread, so notifications are emitted in a sensible order. */
+ if (!in_inferior_list (ptid_get_pid (currthread)))
+ add_inferior (ptid_get_pid (currthread));
+
+ /* This is really a new thread. Add it. */
+ add_thread (currthread);
+ }
+}
/* Call this function as a result of
1) A halt indication (T packet) containing a thread id
*/
static void
-record_currthread (int currthread)
+record_currthread (ptid_t currthread)
{
general_thread = currthread;
- /* If this is a new thread, add it to GDB's thread list.
- If we leave it up to WFI to do this, bad things will happen. */
- if (!in_thread_list (pid_to_ptid (currthread)))
- {
- add_thread (pid_to_ptid (currthread));
- ui_out_text (uiout, "[New ");
- ui_out_text (uiout, target_pid_to_str (pid_to_ptid (currthread)));
- ui_out_text (uiout, "]\n");
- }
+ if (ptid_equal (currthread, minus_one_ptid))
+ /* We're just invalidating the local thread mirror. */
+ return;
+
+ notice_new_inferiors (currthread);
}
static char *last_pass_packet;
}
}
-#define MAGIC_NULL_PID 42000
-
+/* If PTID is MAGIC_NULL_PTID, don't set any thread. If PTID is
+ MINUS_ONE_PTID, set the thread to -1, so the stub returns the
+ thread. If GEN is set, set the general thread, if not, then set
+ the step/continue thread. */
static void
-set_thread (int th, int gen)
+set_thread (struct ptid ptid, int gen)
{
struct remote_state *rs = get_remote_state ();
+ ptid_t state = gen ? general_thread : continue_thread;
char *buf = rs->buf;
- int state = gen ? general_thread : continue_thread;
+ char *endbuf = rs->buf + get_remote_packet_size ();
- if (state == th)
+ if (ptid_equal (state, ptid))
return;
- buf[0] = 'H';
- buf[1] = gen ? 'g' : 'c';
- if (th == MAGIC_NULL_PID)
- {
- buf[2] = '0';
- buf[3] = '\0';
- }
- else if (th < 0)
- xsnprintf (&buf[2], get_remote_packet_size () - 2, "-%x", -th);
+ *buf++ = 'H';
+ *buf++ = gen ? 'g' : 'c';
+ if (ptid_equal (ptid, magic_null_ptid))
+ xsnprintf (buf, endbuf - buf, "0");
+ else if (ptid_equal (ptid, any_thread_ptid))
+ xsnprintf (buf, endbuf - buf, "0");
+ else if (ptid_equal (ptid, minus_one_ptid))
+ xsnprintf (buf, endbuf - buf, "-1");
else
- xsnprintf (&buf[2], get_remote_packet_size () - 2, "%x", th);
- putpkt (buf);
+ write_ptid (buf, endbuf, ptid);
+ putpkt (rs->buf);
getpkt (&rs->buf, &rs->buf_size, 0);
if (gen)
- general_thread = th;
+ general_thread = ptid;
else
- continue_thread = th;
+ continue_thread = ptid;
}
+
+static void
+set_general_thread (struct ptid ptid)
+{
+ set_thread (ptid, 1);
+}
+
+static void
+set_continue_thread (struct ptid ptid)
+{
+ set_thread (ptid, 0);
+}
+
+/* Change the remote current process. Which thread within the process
+ ends up selected isn't important, as long as it is the same process
+ as what INFERIOR_PTID points to.
+
+ This comes from that fact that there is no explicit notion of
+ "selected process" in the protocol. The selected process for
+ general operations is the process the selected general thread
+ belongs to. */
+
+static void
+set_general_process (void)
+{
+ struct remote_state *rs = get_remote_state ();
+
+ /* If the remote can't handle multiple processes, don't bother. */
+ if (!remote_multi_process_p (rs))
+ return;
+
+ /* We only need to change the remote current thread if it's pointing
+ at some other process. */
+ if (ptid_get_pid (general_thread) != ptid_get_pid (inferior_ptid))
+ set_general_thread (inferior_ptid);
+}
+
\f
-/* Return nonzero if the thread TH is still alive on the remote system. */
+/* Return nonzero if the thread PTID is still alive on the remote
+ system. */
static int
remote_thread_alive (ptid_t ptid)
{
struct remote_state *rs = get_remote_state ();
- int tid = PIDGET (ptid);
+ int tid = ptid_get_tid (ptid);
+ char *p, *endp;
+
+ if (ptid_equal (ptid, magic_null_ptid))
+ /* The main thread is always alive. */
+ return 1;
+
+ if (ptid_get_pid (ptid) != 0 && ptid_get_tid (ptid) == 0)
+ /* The main thread is always alive. This can happen after a
+ vAttach, if the remote side doesn't support
+ multi-threading. */
+ return 1;
+
+ p = rs->buf;
+ endp = rs->buf + get_remote_packet_size ();
+
+ *p++ = 'T';
+ write_ptid (p, endp, ptid);
- if (tid < 0)
- xsnprintf (rs->buf, get_remote_packet_size (), "T-%08x", -tid);
- else
- xsnprintf (rs->buf, get_remote_packet_size (), "T%08x", tid);
putpkt (rs->buf);
getpkt (&rs->buf, &rs->buf_size, 0);
return (rs->buf[0] == 'O' && rs->buf[1] == 'K');
static int remote_newthread_step (threadref *ref, void *context);
+
+/* Write a PTID to BUF. ENDBUF points to one-passed-the-end of the
+ buffer we're allowed to write to. Returns
+ BUF+CHARACTERS_WRITTEN. */
+
+static char *
+write_ptid (char *buf, const char *endbuf, ptid_t ptid)
+{
+ int pid, tid;
+ struct remote_state *rs = get_remote_state ();
+
+ if (remote_multi_process_p (rs))
+ {
+ pid = ptid_get_pid (ptid);
+ if (pid < 0)
+ buf += xsnprintf (buf, endbuf - buf, "p-%x.", -pid);
+ else
+ buf += xsnprintf (buf, endbuf - buf, "p%x.", pid);
+ }
+ tid = ptid_get_tid (ptid);
+ if (tid < 0)
+ buf += xsnprintf (buf, endbuf - buf, "-%x", -tid);
+ else
+ buf += xsnprintf (buf, endbuf - buf, "%x", tid);
+
+ return buf;
+}
+
+/* Extract a PTID from BUF. If non-null, OBUF is set to the to one
+ passed the last parsed char. Returns null_ptid on error. */
+
+static ptid_t
+read_ptid (char *buf, char **obuf)
+{
+ char *p = buf;
+ char *pp;
+ ULONGEST pid = 0, tid = 0;
+ ptid_t ptid;
+
+ if (*p == 'p')
+ {
+ /* Multi-process ptid. */
+ pp = unpack_varlen_hex (p + 1, &pid);
+ if (*pp != '.')
+ error (_("invalid remote ptid: %s\n"), p);
+
+ p = pp;
+ pp = unpack_varlen_hex (p + 1, &tid);
+ if (obuf)
+ *obuf = pp;
+ return ptid_build (pid, 0, tid);
+ }
+
+ /* No multi-process. Just a tid. */
+ pp = unpack_varlen_hex (p, &tid);
+
+ /* Since the stub is not sending a process id, then default to
+ what's in inferior_ptid. */
+ pid = ptid_get_pid (inferior_ptid);
+
+ if (obuf)
+ *obuf = pp;
+ return ptid_build (pid, 0, tid);
+}
+
/* Encode 64 bits in 16 chars of hex. */
static const char hexchars[] = "0123456789abcdef";
static char *
unpack_nibble (char *buf, int *val)
{
- ishex (*buf++, val);
+ *val = fromhex (*buf++);
return buf;
}
pack_threadinfo_request (rs->buf, fieldset, threadid);
putpkt (rs->buf);
getpkt (&rs->buf, &rs->buf_size, 0);
+
+ if (rs->buf[0] == '\0')
+ return 0;
+
result = remote_unpack_thread_info_response (rs->buf + 2,
threadid, info);
return result;
putpkt (rs->buf);
getpkt (&rs->buf, &rs->buf_size, 0);
- *result_count =
- parse_threadlist_response (rs->buf + 2, result_limit, &echo_nextthread,
- threadlist, done);
+ if (*rs->buf == '\0')
+ *result_count = 0;
+ else
+ *result_count =
+ parse_threadlist_response (rs->buf + 2, result_limit, &echo_nextthread,
+ threadlist, done);
if (!threadmatch (&echo_nextthread, nextthread))
{
/* remote_find_new_threads retrieves the thread list and for each
thread in the list, looks up the thread in GDB's internal list,
- ading the thread if it does not already exist. This involves
+ adding the thread if it does not already exist. This involves
getting partial thread lists from the remote target so, polling the
quit_flag is required. */
static int
remote_newthread_step (threadref *ref, void *context)
{
- ptid_t ptid;
-
- ptid = pid_to_ptid (threadref_to_int (ref));
+ int pid = ptid_get_pid (inferior_ptid);
+ ptid_t ptid = ptid_build (pid, 0, threadref_to_int (ref));
if (!in_thread_list (ptid))
add_thread (ptid);
remote_current_thread (ptid_t oldpid)
{
struct remote_state *rs = get_remote_state ();
+ char *p = rs->buf;
+ int tid;
+ int pid;
putpkt ("qC");
getpkt (&rs->buf, &rs->buf_size, 0);
if (rs->buf[0] == 'Q' && rs->buf[1] == 'C')
- /* Use strtoul here, so we'll correctly parse values whose highest
- bit is set. The protocol carries them as a simple series of
- hex digits; in the absence of a sign, strtol will see such
- values as positive numbers out of range for signed 'long', and
- return LONG_MAX to indicate an overflow. */
- return pid_to_ptid (strtoul (&rs->buf[2], NULL, 16));
+ return read_ptid (&rs->buf[2], NULL);
else
return oldpid;
}
{
remote_threadlist_iterator (remote_newthread_step, 0,
CRAZY_MAX_THREADS);
- if (PIDGET (inferior_ptid) == MAGIC_NULL_PID) /* ack ack ack */
- inferior_ptid = remote_current_thread (inferior_ptid);
}
/*
{
struct remote_state *rs = get_remote_state ();
char *bufp;
- int tid;
+ ptid_t new_thread;
if (remote_desc == 0) /* paranoia */
error (_("Command can only be used when connected to the remote target."));
{
do
{
- /* Use strtoul here, so we'll correctly parse values
- whose highest bit is set. The protocol carries
- them as a simple series of hex digits; in the
- absence of a sign, strtol will see such values as
- positive numbers out of range for signed 'long',
- and return LONG_MAX to indicate an overflow. */
- tid = strtoul (bufp, &bufp, 16);
- if (tid != 0 && !in_thread_list (pid_to_ptid (tid)))
- add_thread (pid_to_ptid (tid));
+ new_thread = read_ptid (bufp, &bufp);
+ if (!ptid_equal (new_thread, null_ptid)
+ && (!in_thread_list (new_thread)
+ || is_exited (new_thread)))
+ {
+ /* When connected to a multi-process aware stub,
+ "info threads" may show up threads of
+ inferiors we didn't know about yet. Add them
+ now, and before adding any of its child
+ threads, so notifications are emitted in a
+ sensible order. */
+ if (!in_inferior_list (ptid_get_pid (new_thread)))
+ add_inferior (ptid_get_pid (new_thread));
+
+ add_thread (new_thread);
+
+ /* In non-stop mode, we assume new found threads
+ are running until we proven otherwise with a
+ stop reply. In all-stop, we can only get
+ here if all threads are stopped. */
+ set_executing (new_thread, non_stop ? 1 : 0);
+ set_running (new_thread, non_stop ? 1 : 0);
+ }
}
while (*bufp++ == ','); /* comma-separated list */
putpkt ("qsThreadInfo");
}
}
+ /* Only qfThreadInfo is supported in non-stop mode. */
+ if (non_stop)
+ return;
+
/* Else fall back to old method based on jmetzler protocol. */
use_threadinfo_query = 0;
remote_find_new_threads ();
internal_error (__FILE__, __LINE__,
_("remote_threads_extra_info"));
+ if (ptid_equal (tp->ptid, magic_null_ptid)
+ || (ptid_get_pid (tp->ptid) != 0 && ptid_get_tid (tp->ptid) == 0))
+ /* This is the main thread which was added by GDB. The remote
+ server doesn't know about it. */
+ return NULL;
+
if (use_threadextra_query)
{
- xsnprintf (rs->buf, get_remote_packet_size (), "qThreadExtraInfo,%x",
- PIDGET (tp->ptid));
+ char *b = rs->buf;
+ char *endb = rs->buf + get_remote_packet_size ();
+
+ xsnprintf (b, endb - b, "qThreadExtraInfo,");
+ b += strlen (b);
+ write_ptid (b, endb, tp->ptid);
+
putpkt (rs->buf);
getpkt (&rs->buf, &rs->buf_size, 0);
if (rs->buf[0] != 0)
use_threadextra_query = 0;
set = TAG_THREADID | TAG_EXISTS | TAG_THREADNAME
| TAG_MOREDISPLAY | TAG_DISPLAY;
- int_to_threadref (&id, PIDGET (tp->ptid));
+ int_to_threadref (&id, ptid_get_tid (tp->ptid));
if (remote_get_threadinfo (&id, set, &threadinfo))
if (threadinfo.active)
{
putpkt (rs->buf);
remote_fileio_reset ();
-
- /* Now query for status so this looks just like we restarted
- gdbserver from scratch. */
- putpkt ("?");
- getpkt (&rs->buf, &rs->buf_size, 0);
}
\f
/* Clean up connection to a remote debugger. */
static void
remote_close (int quitting)
{
- if (remote_desc)
- serial_close (remote_desc);
+ if (remote_desc == NULL)
+ return; /* already closed */
+
+ /* Make sure we leave stdin registered in the event loop, and we
+ don't leave the async SIGINT signal handler installed. */
+ remote_terminal_ours ();
+
+ serial_close (remote_desc);
remote_desc = NULL;
+
+ /* We don't have a connection to the remote stub anymore. Get rid
+ of all the inferiors and their threads we were controlling. */
+ discard_all_inferiors ();
+
+ /* We're no longer interested in any of these events. */
+ discard_pending_stop_replies (-1);
+
+ if (remote_async_inferior_event_token)
+ delete_async_event_handler (&remote_async_inferior_event_token);
+ if (remote_async_get_pending_events_token)
+ delete_async_event_handler (&remote_async_get_pending_events_token);
+
+ generic_mourn_inferior ();
}
/* Query the remote side for the text, data and bss offsets. */
struct remote_state *rs = get_remote_state ();
char *buf;
char *ptr;
- int lose;
- CORE_ADDR text_addr, data_addr, bss_addr;
+ int lose, num_segments = 0, do_sections, do_segments;
+ CORE_ADDR text_addr, data_addr, bss_addr, segments[2];
struct section_offsets *offs;
+ struct symfile_segment_data *data;
+
+ if (symfile_objfile == NULL)
+ return;
putpkt ("qOffsets");
getpkt (&rs->buf, &rs->buf_size, 0);
/* Don't use strtol, could lose on big values. */
while (*ptr && *ptr != ';')
text_addr = (text_addr << 4) + fromhex (*ptr++);
- }
- else
- lose = 1;
- if (!lose && strncmp (ptr, ";Data=", 6) == 0)
- {
- ptr += 6;
- while (*ptr && *ptr != ';')
- data_addr = (data_addr << 4) + fromhex (*ptr++);
- }
- else
- lose = 1;
+ if (strncmp (ptr, ";Data=", 6) == 0)
+ {
+ ptr += 6;
+ while (*ptr && *ptr != ';')
+ data_addr = (data_addr << 4) + fromhex (*ptr++);
+ }
+ else
+ lose = 1;
+
+ if (!lose && strncmp (ptr, ";Bss=", 5) == 0)
+ {
+ ptr += 5;
+ while (*ptr && *ptr != ';')
+ bss_addr = (bss_addr << 4) + fromhex (*ptr++);
- if (!lose && strncmp (ptr, ";Bss=", 5) == 0)
+ if (bss_addr != data_addr)
+ warning (_("Target reported unsupported offsets: %s"), buf);
+ }
+ else
+ lose = 1;
+ }
+ else if (strncmp (ptr, "TextSeg=", 8) == 0)
{
- ptr += 5;
+ ptr += 8;
+ /* Don't use strtol, could lose on big values. */
while (*ptr && *ptr != ';')
- bss_addr = (bss_addr << 4) + fromhex (*ptr++);
+ text_addr = (text_addr << 4) + fromhex (*ptr++);
+ num_segments = 1;
+
+ if (strncmp (ptr, ";DataSeg=", 9) == 0)
+ {
+ ptr += 9;
+ while (*ptr && *ptr != ';')
+ data_addr = (data_addr << 4) + fromhex (*ptr++);
+ num_segments++;
+ }
}
else
lose = 1;
if (lose)
error (_("Malformed response to offset query, %s"), buf);
-
- if (symfile_objfile == NULL)
- return;
+ else if (*ptr != '\0')
+ warning (_("Target reported unsupported offsets: %s"), buf);
offs = ((struct section_offsets *)
alloca (SIZEOF_N_SECTION_OFFSETS (symfile_objfile->num_sections)));
memcpy (offs, symfile_objfile->section_offsets,
SIZEOF_N_SECTION_OFFSETS (symfile_objfile->num_sections));
- offs->offsets[SECT_OFF_TEXT (symfile_objfile)] = text_addr;
+ data = get_symfile_segment_data (symfile_objfile->obfd);
+ do_segments = (data != NULL);
+ do_sections = num_segments == 0;
- /* This is a temporary kludge to force data and bss to use the same offsets
- because that's what nlmconv does now. The real solution requires changes
- to the stub and remote.c that I don't have time to do right now. */
+ if (num_segments > 0)
+ {
+ segments[0] = text_addr;
+ segments[1] = data_addr;
+ }
+ /* If we have two segments, we can still try to relocate everything
+ by assuming that the .text and .data offsets apply to the whole
+ text and data segments. Convert the offsets given in the packet
+ to base addresses for symfile_map_offsets_to_segments. */
+ else if (data && data->num_segments == 2)
+ {
+ segments[0] = data->segment_bases[0] + text_addr;
+ segments[1] = data->segment_bases[1] + data_addr;
+ num_segments = 2;
+ }
+ /* If the object file has only one segment, assume that it is text
+ rather than data; main programs with no writable data are rare,
+ but programs with no code are useless. Of course the code might
+ have ended up in the data segment... to detect that we would need
+ the permissions here. */
+ else if (data && data->num_segments == 1)
+ {
+ segments[0] = data->segment_bases[0] + text_addr;
+ num_segments = 1;
+ }
+ /* There's no way to relocate by segment. */
+ else
+ do_segments = 0;
- offs->offsets[SECT_OFF_DATA (symfile_objfile)] = data_addr;
- offs->offsets[SECT_OFF_BSS (symfile_objfile)] = data_addr;
+ if (do_segments)
+ {
+ int ret = symfile_map_offsets_to_segments (symfile_objfile->obfd, data,
+ offs, num_segments, segments);
- objfile_relocate (symfile_objfile, offs);
-}
+ if (ret == 0 && !do_sections)
+ error (_("Can not handle qOffsets TextSeg response with this symbol file"));
-/* Stub for catch_exception. */
+ if (ret > 0)
+ do_sections = 0;
+ }
-static void
-remote_start_remote (struct ui_out *uiout, void *from_tty_p)
-{
- int from_tty = * (int *) from_tty_p;
+ if (data)
+ free_symfile_segment_data (data);
- immediate_quit++; /* Allow user to interrupt it. */
+ if (do_sections)
+ {
+ offs->offsets[SECT_OFF_TEXT (symfile_objfile)] = text_addr;
- /* Ack any packet which the remote side has already sent. */
- serial_write (remote_desc, "+", 1);
+ /* This is a temporary kludge to force data and bss to use the same offsets
+ because that's what nlmconv does now. The real solution requires changes
+ to the stub and remote.c that I don't have time to do right now. */
- /* Let the stub know that we want it to return the thread. */
- set_thread (-1, 0);
+ offs->offsets[SECT_OFF_DATA (symfile_objfile)] = data_addr;
+ offs->offsets[SECT_OFF_BSS (symfile_objfile)] = data_addr;
+ }
- inferior_ptid = remote_current_thread (inferior_ptid);
+ objfile_relocate (symfile_objfile, offs);
+}
- get_offsets (); /* Get text, data & bss offsets. */
+/* Callback for iterate_over_threads. Set the STOP_REQUESTED flags in
+ threads we know are stopped already. This is used during the
+ initial remote connection in non-stop mode --- threads that are
+ reported as already being stopped are left stopped. */
- putpkt ("?"); /* Initiate a query from remote machine. */
- immediate_quit--;
+static int
+set_stop_requested_callback (struct thread_info *thread, void *data)
+{
+ /* If we have a stop reply for this thread, it must be stopped. */
+ if (peek_stop_reply (thread->ptid))
+ set_stop_requested (thread->ptid, 1);
- start_remote (from_tty); /* Initialize gdb process mechanisms. */
+ return 0;
}
-/* Open a connection to a remote debugger.
- NAME is the filename used for communication. */
+/* Stub for catch_exception. */
-static void
-remote_open (char *name, int from_tty)
+struct start_remote_args
{
- remote_open_1 (name, from_tty, &remote_ops, 0, 0);
-}
+ int from_tty;
-/* Just like remote_open, but with asynchronous support. */
-static void
-remote_async_open (char *name, int from_tty)
-{
- remote_open_1 (name, from_tty, &remote_async_ops, 0, 1);
-}
+ /* The current target. */
+ struct target_ops *target;
-/* Open a connection to a remote debugger using the extended
- remote gdb protocol. NAME is the filename used for communication. */
+ /* Non-zero if this is an extended-remote target. */
+ int extended_p;
+};
static void
-extended_remote_open (char *name, int from_tty)
+remote_start_remote (struct ui_out *uiout, void *opaque)
{
- remote_open_1 (name, from_tty, &extended_remote_ops, 1 /*extended_p */,
- 0 /* async_p */);
-}
+ struct start_remote_args *args = opaque;
+ struct remote_state *rs = get_remote_state ();
+ struct packet_config *noack_config;
+ char *wait_status = NULL;
-/* Just like extended_remote_open, but with asynchronous support. */
-static void
-extended_remote_async_open (char *name, int from_tty)
-{
- remote_open_1 (name, from_tty, &extended_async_remote_ops,
- 1 /*extended_p */, 1 /* async_p */);
-}
+ immediate_quit++; /* Allow user to interrupt it. */
-/* Generic code for opening a connection to a remote target. */
+ /* Ack any packet which the remote side has already sent. */
+ serial_write (remote_desc, "+", 1);
-static void
-init_all_packet_configs (void)
-{
- int i;
- for (i = 0; i < PACKET_MAX; i++)
- update_packet_config (&remote_protocol_packets[i]);
-}
+ /* The first packet we send to the target is the optional "supported
+ packets" request. If the target can answer this, it will tell us
+ which later probes to skip. */
+ remote_query_supported ();
-/* Symbol look-up. */
+ /* Next, we possibly activate noack mode.
-static void
-remote_check_symbols (struct objfile *objfile)
-{
- struct remote_state *rs = get_remote_state ();
- char *msg, *reply, *tmp;
- struct minimal_symbol *sym;
- int end;
+ If the QStartNoAckMode packet configuration is set to AUTO,
+ enable noack mode if the stub reported a wish for it with
+ qSupported.
- if (remote_protocol_packets[PACKET_qSymbol].support == PACKET_DISABLE)
- return;
+ If set to TRUE, then enable noack mode even if the stub didn't
+ report it in qSupported. If the stub doesn't reply OK, the
+ session ends with an error.
- /* Allocate a message buffer. We can't reuse the input buffer in RS,
- because we need both at the same time. */
- msg = alloca (get_remote_packet_size ());
+ If FALSE, then don't activate noack mode, regardless of what the
+ stub claimed should be the default with qSupported. */
- /* Invite target to request symbol lookups. */
+ noack_config = &remote_protocol_packets[PACKET_QStartNoAckMode];
- putpkt ("qSymbol::");
- getpkt (&rs->buf, &rs->buf_size, 0);
- packet_ok (rs->buf, &remote_protocol_packets[PACKET_qSymbol]);
- reply = rs->buf;
+ if (noack_config->detect == AUTO_BOOLEAN_TRUE
+ || (noack_config->detect == AUTO_BOOLEAN_AUTO
+ && noack_config->support == PACKET_ENABLE))
+ {
+ putpkt ("QStartNoAckMode");
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ if (packet_ok (rs->buf, noack_config) == PACKET_OK)
+ rs->noack_mode = 1;
+ }
- while (strncmp (reply, "qSymbol:", 8) == 0)
+ if (args->extended_p)
{
- tmp = &reply[8];
+ /* Tell the remote that we are using the extended protocol. */
+ putpkt ("!");
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ }
+
+ /* On OSs where the list of libraries is global to all
+ processes, we fetch them early. */
+ if (gdbarch_has_global_solist (target_gdbarch))
+ solib_add (NULL, args->from_tty, args->target, auto_solib_add);
+
+ /* Next, if the target can specify a description, read it. We do
+ this before anything involving memory or registers. */
+ target_find_description ();
+
+ if (non_stop)
+ {
+ if (!rs->non_stop_aware)
+ error (_("Non-stop mode requested, but remote does not support non-stop"));
+
+ putpkt ("QNonStop:1");
+ getpkt (&rs->buf, &rs->buf_size, 0);
+
+ if (strcmp (rs->buf, "OK") != 0)
+ error ("Remote refused setting non-stop mode with: %s", rs->buf);
+
+ /* Find about threads and processes the stub is already
+ controlling. We default to adding them in the running state.
+ The '?' query below will then tell us about which threads are
+ stopped. */
+
+ /* If we're not using the multi-process extensions, there's no
+ way to know the pid of the reported threads; use the magic
+ number. */
+ if (!remote_multi_process_p (rs))
+ inferior_ptid = magic_null_ptid;
+
+ remote_threads_info ();
+ }
+ else if (rs->non_stop_aware)
+ {
+ /* Don't assume that the stub can operate in all-stop mode.
+ Request it explicitely. */
+ putpkt ("QNonStop:0");
+ getpkt (&rs->buf, &rs->buf_size, 0);
+
+ if (strcmp (rs->buf, "OK") != 0)
+ error ("Remote refused setting all-stop mode with: %s", rs->buf);
+ }
+
+ /* Check whether the target is running now. */
+ putpkt ("?");
+ getpkt (&rs->buf, &rs->buf_size, 0);
+
+ if (!non_stop)
+ {
+ if (rs->buf[0] == 'W' || rs->buf[0] == 'X')
+ {
+ if (args->extended_p)
+ {
+ /* We're connected, but not running. Drop out before we
+ call start_remote. */
+ target_mark_exited (args->target);
+ return;
+ }
+ else
+ error (_("The target is not running (try extended-remote?)"));
+ }
+ else
+ {
+ if (args->extended_p)
+ target_mark_running (args->target);
+
+ /* Save the reply for later. */
+ wait_status = alloca (strlen (rs->buf) + 1);
+ strcpy (wait_status, rs->buf);
+ }
+
+ /* Let the stub know that we want it to return the thread. */
+ set_continue_thread (minus_one_ptid);
+
+ /* Without this, some commands which require an active target
+ (such as kill) won't work. This variable serves (at least)
+ double duty as both the pid of the target process (if it has
+ such), and as a flag indicating that a target is active.
+ These functions should be split out into seperate variables,
+ especially since GDB will someday have a notion of debugging
+ several processes. */
+ inferior_ptid = magic_null_ptid;
+
+ /* Now, if we have thread information, update inferior_ptid. */
+ inferior_ptid = remote_current_thread (inferior_ptid);
+
+ add_inferior (ptid_get_pid (inferior_ptid));
+
+ /* Always add the main thread. */
+ add_thread_silent (inferior_ptid);
+
+ get_offsets (); /* Get text, data & bss offsets. */
+
+ /* Use the previously fetched status. */
+ gdb_assert (wait_status != NULL);
+ strcpy (rs->buf, wait_status);
+ rs->cached_wait_status = 1;
+
+ immediate_quit--;
+ start_remote (args->from_tty); /* Initialize gdb process mechanisms. */
+ }
+ else
+ {
+ /* In non-stop, we will either get an "OK", meaning that there
+ are no stopped threads at this time; or, a regular stop
+ reply. In the latter case, there may be more than one thread
+ stopped --- we pull them all out using the vStopped
+ mechanism. */
+ if (strcmp (rs->buf, "OK") != 0)
+ {
+ struct stop_reply *stop_reply;
+ struct cleanup *old_chain;
+
+ stop_reply = stop_reply_xmalloc ();
+ old_chain = make_cleanup (do_stop_reply_xfree, stop_reply);
+
+ remote_parse_stop_reply (rs->buf, stop_reply);
+ discard_cleanups (old_chain);
+
+ /* get_pending_stop_replies acks this one, and gets the rest
+ out. */
+ pending_stop_reply = stop_reply;
+ remote_get_pending_stop_replies ();
+
+ /* Make sure that threads that were stopped remain
+ stopped. */
+ iterate_over_threads (set_stop_requested_callback, NULL);
+ }
+
+ if (target_can_async_p ())
+ target_async (inferior_event_handler, 0);
+
+ if (thread_count () == 0)
+ {
+ if (args->extended_p)
+ {
+ /* We're connected, but not running. Drop out before we
+ call start_remote. */
+ target_mark_exited (args->target);
+ return;
+ }
+ else
+ error (_("The target is not running (try extended-remote?)"));
+ }
+
+ if (args->extended_p)
+ target_mark_running (args->target);
+
+ /* Let the stub know that we want it to return the thread. */
+
+ /* Force the stub to choose a thread. */
+ set_general_thread (null_ptid);
+
+ /* Query it. */
+ inferior_ptid = remote_current_thread (minus_one_ptid);
+ if (ptid_equal (inferior_ptid, minus_one_ptid))
+ error (_("remote didn't report the current thread in non-stop mode"));
+
+ get_offsets (); /* Get text, data & bss offsets. */
+
+ /* In non-stop mode, any cached wait status will be stored in
+ the stop reply queue. */
+ gdb_assert (wait_status == NULL);
+ }
+
+ /* If we connected to a live target, do some additional setup. */
+ if (target_has_execution)
+ {
+ if (exec_bfd) /* No use without an exec file. */
+ remote_check_symbols (symfile_objfile);
+ }
+
+ /* If code is shared between processes, then breakpoints are global
+ too; Insert them now. */
+ if (gdbarch_has_global_solist (target_gdbarch)
+ && breakpoints_always_inserted_mode ())
+ insert_breakpoints ();
+}
+
+/* Open a connection to a remote debugger.
+ NAME is the filename used for communication. */
+
+static void
+remote_open (char *name, int from_tty)
+{
+ remote_open_1 (name, from_tty, &remote_ops, 0);
+}
+
+/* Open a connection to a remote debugger using the extended
+ remote gdb protocol. NAME is the filename used for communication. */
+
+static void
+extended_remote_open (char *name, int from_tty)
+{
+ remote_open_1 (name, from_tty, &extended_remote_ops, 1 /*extended_p */);
+}
+
+/* Generic code for opening a connection to a remote target. */
+
+static void
+init_all_packet_configs (void)
+{
+ int i;
+ for (i = 0; i < PACKET_MAX; i++)
+ update_packet_config (&remote_protocol_packets[i]);
+}
+
+/* Symbol look-up. */
+
+static void
+remote_check_symbols (struct objfile *objfile)
+{
+ struct remote_state *rs = get_remote_state ();
+ char *msg, *reply, *tmp;
+ struct minimal_symbol *sym;
+ int end;
+
+ if (remote_protocol_packets[PACKET_qSymbol].support == PACKET_DISABLE)
+ return;
+
+ /* Make sure the remote is pointing at the right process. */
+ set_general_process ();
+
+ /* Allocate a message buffer. We can't reuse the input buffer in RS,
+ because we need both at the same time. */
+ msg = alloca (get_remote_packet_size ());
+
+ /* Invite target to request symbol lookups. */
+
+ putpkt ("qSymbol::");
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ packet_ok (rs->buf, &remote_protocol_packets[PACKET_qSymbol]);
+ reply = rs->buf;
+
+ while (strncmp (reply, "qSymbol:", 8) == 0)
+ {
+ tmp = &reply[8];
end = hex2bin (tmp, (gdb_byte *) msg, strlen (tmp) / 2);
msg[end] = '\0';
sym = lookup_minimal_symbol (msg, NULL, NULL);
if (sym == NULL)
xsnprintf (msg, get_remote_packet_size (), "qSymbol::%s", &reply[8]);
else
- xsnprintf (msg, get_remote_packet_size (), "qSymbol:%s:%s",
- paddr_nz (SYMBOL_VALUE_ADDRESS (sym)),
- &reply[8]);
+ {
+ CORE_ADDR sym_addr = SYMBOL_VALUE_ADDRESS (sym);
+
+ /* If this is a function address, return the start of code
+ instead of any data function descriptor. */
+ sym_addr = gdbarch_convert_from_func_ptr_addr (target_gdbarch,
+ sym_addr,
+ ¤t_target);
+
+ xsnprintf (msg, get_remote_packet_size (), "qSymbol:%s:%s",
+ paddr_nz (sym_addr), &reply[8]);
+ }
+
putpkt (msg);
getpkt (&rs->buf, &rs->buf_size, 0);
reply = rs->buf;
rs->explicit_packet_size = packet_size;
}
+static void
+remote_multi_process_feature (const struct protocol_feature *feature,
+ enum packet_support support, const char *value)
+{
+ struct remote_state *rs = get_remote_state ();
+ rs->multi_process_aware = (support == PACKET_ENABLE);
+}
+
+static void
+remote_non_stop_feature (const struct protocol_feature *feature,
+ enum packet_support support, const char *value)
+{
+ struct remote_state *rs = get_remote_state ();
+ rs->non_stop_aware = (support == PACKET_ENABLE);
+}
+
static struct protocol_feature remote_protocol_features[] = {
{ "PacketSize", PACKET_DISABLE, remote_packet_size, -1 },
{ "qXfer:auxv:read", PACKET_DISABLE, remote_supported_packet,
PACKET_qXfer_auxv },
+ { "qXfer:features:read", PACKET_DISABLE, remote_supported_packet,
+ PACKET_qXfer_features },
+ { "qXfer:libraries:read", PACKET_DISABLE, remote_supported_packet,
+ PACKET_qXfer_libraries },
{ "qXfer:memory-map:read", PACKET_DISABLE, remote_supported_packet,
PACKET_qXfer_memory_map },
+ { "qXfer:spu:read", PACKET_DISABLE, remote_supported_packet,
+ PACKET_qXfer_spu_read },
+ { "qXfer:spu:write", PACKET_DISABLE, remote_supported_packet,
+ PACKET_qXfer_spu_write },
{ "QPassSignals", PACKET_DISABLE, remote_supported_packet,
PACKET_QPassSignals },
+ { "QStartNoAckMode", PACKET_DISABLE, remote_supported_packet,
+ PACKET_QStartNoAckMode },
+ { "multiprocess", PACKET_DISABLE, remote_multi_process_feature, -1 },
+ { "QNonStop", PACKET_DISABLE, remote_non_stop_feature, -1 },
};
static void
rs->buf[0] = 0;
if (remote_protocol_packets[PACKET_qSupported].support != PACKET_DISABLE)
{
- putpkt ("qSupported");
+ if (rs->extended)
+ putpkt ("qSupported:multiprocess+");
+ else
+ putpkt ("qSupported");
+
getpkt (&rs->buf, &rs->buf_size, 0);
/* If an error occured, warn, but do not return - just reset the
static void
-remote_open_1 (char *name, int from_tty, struct target_ops *target,
- int extended_p, int async_p)
+remote_open_1 (char *name, int from_tty, struct target_ops *target, int extended_p)
{
struct remote_state *rs = get_remote_state ();
+
if (name == 0)
error (_("To open a remote debug connection, you need to specify what\n"
"serial device is attached to the remote system\n"
"(e.g. /dev/ttyS0, /dev/ttya, COM1, etc.)."));
/* See FIXME above. */
- if (!async_p)
+ if (!target_async_permitted)
wait_forever_enabled_p = 1;
+ /* If we're connected to a running target, target_preopen will kill it.
+ But if we're connected to a target system with no running process,
+ then we will still be connected when it returns. Ask this question
+ first, before target_preopen has a chance to kill anything. */
+ if (remote_desc != NULL && !target_has_execution)
+ {
+ if (!from_tty
+ || query (_("Already connected to a remote target. Disconnect? ")))
+ pop_target ();
+ else
+ error (_("Still connected."));
+ }
+
target_preopen (from_tty);
unpush_target (target);
+ /* This time without a query. If we were connected to an
+ extended-remote target and target_preopen killed the running
+ process, we may still be connected. If we are starting "target
+ remote" now, the extended-remote target will not have been
+ removed by unpush_target. */
+ if (remote_desc != NULL && !target_has_execution)
+ pop_target ();
+
/* Make sure we send the passed signals list the next time we resume. */
xfree (last_pass_packet);
last_pass_packet = NULL;
}
push_target (target); /* Switch to using remote target now. */
+ /* Assume that the target is running, unless we learn otherwise. */
+ target_mark_running (target);
+
+ /* Register extra event sources in the event loop. */
+ remote_async_inferior_event_token
+ = create_async_event_handler (remote_async_inferior_event_handler,
+ NULL);
+ remote_async_get_pending_events_token
+ = create_async_event_handler (remote_async_get_pending_events_handler,
+ NULL);
+
/* Reset the target state; these things will be queried either by
remote_query_supported or as they are needed. */
init_all_packet_configs ();
+ rs->cached_wait_status = 0;
rs->explicit_packet_size = 0;
+ rs->noack_mode = 0;
+ rs->multi_process_aware = 0;
+ rs->extended = extended_p;
+ rs->non_stop_aware = 0;
+ rs->waiting_for_stop_reply = 0;
- general_thread = -2;
- continue_thread = -2;
+ general_thread = not_sent_ptid;
+ continue_thread = not_sent_ptid;
/* Probe for ability to use "ThreadInfo" query, as required. */
use_threadinfo_query = 1;
use_threadextra_query = 1;
- /* The first packet we send to the target is the optional "supported
- packets" request. If the target can answer this, it will tell us
- which later probes to skip. */
- remote_query_supported ();
-
- /* Without this, some commands which require an active target (such
- as kill) won't work. This variable serves (at least) double duty
- as both the pid of the target process (if it has such), and as a
- flag indicating that a target is active. These functions should
- be split out into seperate variables, especially since GDB will
- someday have a notion of debugging several processes. */
-
- inferior_ptid = pid_to_ptid (MAGIC_NULL_PID);
-
- if (async_p)
+ if (target_async_permitted)
{
/* With this target we start out by owning the terminal. */
remote_async_terminal_ours_p = 1;
/* First delete any symbols previously loaded from shared libraries. */
no_shared_libraries (NULL, 0);
+ /* Start afresh. */
+ init_thread_list ();
+
/* Start the remote connection. If error() or QUIT, discard this
target (we'd otherwise be in an inconsistent state) and then
propogate the error on up the exception chain. This ensures that
all the ``target ....'' commands to share a common callback
function. See cli-dump.c. */
{
- struct gdb_exception ex
- = catch_exception (uiout, remote_start_remote, &from_tty,
- RETURN_MASK_ALL);
+ struct gdb_exception ex;
+ struct start_remote_args args;
+
+ args.from_tty = from_tty;
+ args.target = target;
+ args.extended_p = extended_p;
+
+ ex = catch_exception (uiout, remote_start_remote, &args, RETURN_MASK_ALL);
if (ex.reason < 0)
{
- pop_target ();
- if (async_p)
+ /* Pop the partially set up target - unless something else did
+ already before throwing the exception. */
+ if (remote_desc != NULL)
+ pop_target ();
+ if (target_async_permitted)
wait_forever_enabled_p = 1;
throw_exception (ex);
}
}
- if (async_p)
+ if (target_async_permitted)
wait_forever_enabled_p = 1;
-
- if (extended_p)
- {
- /* Tell the remote that we are using the extended protocol. */
- putpkt ("!");
- getpkt (&rs->buf, &rs->buf_size, 0);
- }
-
- if (exec_bfd) /* No use without an exec file. */
- remote_check_symbols (symfile_objfile);
}
/* This takes a program previously attached to and detaches it. After
die when it hits one. */
static void
-remote_detach (char *args, int from_tty)
+remote_detach_1 (char *args, int from_tty, int extended)
{
+ int pid = ptid_get_pid (inferior_ptid);
struct remote_state *rs = get_remote_state ();
if (args)
error (_("Argument given to \"detach\" when remotely debugging."));
+ if (!target_has_execution)
+ error (_("No process to detach from."));
+
/* Tell the remote target to detach. */
- strcpy (rs->buf, "D");
- remote_send (&rs->buf, &rs->buf_size);
+ if (remote_multi_process_p (rs))
+ sprintf (rs->buf, "D;%x", pid);
+ else
+ strcpy (rs->buf, "D");
+
+ putpkt (rs->buf);
+ getpkt (&rs->buf, &rs->buf_size, 0);
- /* Unregister the file descriptor from the event loop. */
- if (target_is_async_p ())
- serial_async (remote_desc, NULL, 0);
+ if (rs->buf[0] == 'O' && rs->buf[1] == 'K')
+ ;
+ else if (rs->buf[0] == '\0')
+ error (_("Remote doesn't know how to detach"));
+ else
+ error (_("Can't detach process."));
- target_mourn_inferior ();
if (from_tty)
- puts_filtered ("Ending remote debugging.\n");
+ {
+ if (remote_multi_process_p (rs))
+ printf_filtered (_("Detached from remote %s.\n"),
+ target_pid_to_str (pid_to_ptid (pid)));
+ else
+ {
+ if (extended)
+ puts_filtered (_("Detached from remote process.\n"));
+ else
+ puts_filtered (_("Ending remote debugging.\n"));
+ }
+ }
+
+ discard_pending_stop_replies (pid);
+ detach_inferior (pid);
+ target_mourn_inferior ();
+}
+
+static void
+remote_detach (struct target_ops *ops, char *args, int from_tty)
+{
+ remote_detach_1 (args, from_tty, 0);
+}
+
+static void
+extended_remote_detach (struct target_ops *ops, char *args, int from_tty)
+{
+ remote_detach_1 (args, from_tty, 1);
}
/* Same as remote_detach, but don't send the "D" packet; just disconnect. */
remote_disconnect (struct target_ops *target, char *args, int from_tty)
{
if (args)
- error (_("Argument given to \"detach\" when remotely debugging."));
+ error (_("Argument given to \"disconnect\" when remotely debugging."));
- /* Unregister the file descriptor from the event loop. */
- if (target_is_async_p ())
- serial_async (remote_desc, NULL, 0);
+ /* Make sure we unpush even the extended remote targets; mourn
+ won't do it. So call remote_mourn_1 directly instead of
+ target_mourn_inferior. */
+ remote_mourn_1 (target);
- target_mourn_inferior ();
if (from_tty)
puts_filtered ("Ending remote debugging.\n");
}
+/* Attach to the process specified by ARGS. If FROM_TTY is non-zero,
+ be chatty about it. */
+
+static void
+extended_remote_attach_1 (struct target_ops *target, char *args, int from_tty)
+{
+ struct remote_state *rs = get_remote_state ();
+ int pid;
+ char *dummy;
+ char *wait_status = NULL;
+ struct inferior *inf;
+
+ if (!args)
+ error_no_arg (_("process-id to attach"));
+
+ dummy = args;
+ pid = strtol (args, &dummy, 0);
+ /* Some targets don't set errno on errors, grrr! */
+ if (pid == 0 && args == dummy)
+ error (_("Illegal process-id: %s."), args);
+
+ if (remote_protocol_packets[PACKET_vAttach].support == PACKET_DISABLE)
+ error (_("This target does not support attaching to a process"));
+
+ sprintf (rs->buf, "vAttach;%x", pid);
+ putpkt (rs->buf);
+ getpkt (&rs->buf, &rs->buf_size, 0);
+
+ if (packet_ok (rs->buf, &remote_protocol_packets[PACKET_vAttach]) == PACKET_OK)
+ {
+ if (from_tty)
+ printf_unfiltered (_("Attached to %s\n"),
+ target_pid_to_str (pid_to_ptid (pid)));
+
+ if (!non_stop)
+ {
+ /* Save the reply for later. */
+ wait_status = alloca (strlen (rs->buf) + 1);
+ strcpy (wait_status, rs->buf);
+ }
+ else if (strcmp (rs->buf, "OK") != 0)
+ error (_("Attaching to %s failed with: %s"),
+ target_pid_to_str (pid_to_ptid (pid)),
+ rs->buf);
+ }
+ else if (remote_protocol_packets[PACKET_vAttach].support == PACKET_DISABLE)
+ error (_("This target does not support attaching to a process"));
+ else
+ error (_("Attaching to %s failed"),
+ target_pid_to_str (pid_to_ptid (pid)));
+
+ target_mark_running (target);
+ inferior_ptid = pid_to_ptid (pid);
+
+ /* Now, if we have thread information, update inferior_ptid. */
+ inferior_ptid = remote_current_thread (inferior_ptid);
+
+ inf = add_inferior (pid);
+ inf->attach_flag = 1;
+
+ if (non_stop)
+ /* Get list of threads. */
+ remote_threads_info ();
+ else
+ /* Add the main thread to the thread list. */
+ add_thread_silent (inferior_ptid);
+
+ /* Next, if the target can specify a description, read it. We do
+ this before anything involving memory or registers. */
+ target_find_description ();
+
+ if (!non_stop)
+ {
+ /* Use the previously fetched status. */
+ gdb_assert (wait_status != NULL);
+
+ if (target_can_async_p ())
+ {
+ struct stop_reply *stop_reply;
+ struct cleanup *old_chain;
+
+ stop_reply = stop_reply_xmalloc ();
+ old_chain = make_cleanup (do_stop_reply_xfree, stop_reply);
+ remote_parse_stop_reply (wait_status, stop_reply);
+ discard_cleanups (old_chain);
+ push_stop_reply (stop_reply);
+
+ target_async (inferior_event_handler, 0);
+ }
+ else
+ {
+ gdb_assert (wait_status != NULL);
+ strcpy (rs->buf, wait_status);
+ rs->cached_wait_status = 1;
+ }
+ }
+ else
+ gdb_assert (wait_status == NULL);
+}
+
+static void
+extended_remote_attach (struct target_ops *ops, char *args, int from_tty)
+{
+ extended_remote_attach_1 (ops, args, from_tty);
+}
+
/* Convert hex digit A to a number. */
static int
support_S = 0;
support_c = 0;
support_C = 0;
+ rs->support_vCont_t = 0;
while (p && *p == ';')
{
p++;
support_c = 1;
else if (*p == 'C' && (*(p + 1) == ';' || *(p + 1) == 0))
support_C = 1;
+ else if (*p == 't' && (*(p + 1) == ';' || *(p + 1) == 0))
+ rs->support_vCont_t = 1;
p = strchr (p, ';');
}
/* Resume the remote inferior by using a "vCont" packet. The thread
to be resumed is PTID; STEP and SIGGNAL indicate whether the
- resumed thread should be single-stepped and/or signalled. If PTID's
- PID is -1, then all threads are resumed; the thread to be stepped and/or
- signalled is given in the global INFERIOR_PTID. This function returns
- non-zero iff it resumes the inferior.
+ resumed thread should be single-stepped and/or signalled. If PTID
+ equals minus_one_ptid, then all threads are resumed; the thread to
+ be stepped and/or signalled is given in the global INFERIOR_PTID.
+ This function returns non-zero iff it resumes the inferior.
This function issues a strict subset of all possible vCont commands at the
moment. */
remote_vcont_resume (ptid_t ptid, int step, enum target_signal siggnal)
{
struct remote_state *rs = get_remote_state ();
- int pid = PIDGET (ptid);
- char *buf = NULL, *outbuf;
- struct cleanup *old_cleanup;
+ char *p;
+ char *endp;
if (remote_protocol_packets[PACKET_vCont].support == PACKET_SUPPORT_UNKNOWN)
remote_vcont_probe (rs);
if (remote_protocol_packets[PACKET_vCont].support == PACKET_DISABLE)
return 0;
+ p = rs->buf;
+ endp = rs->buf + get_remote_packet_size ();
+
/* If we could generate a wider range of packets, we'd have to worry
about overflowing BUF. Should there be a generic
"multi-part-packet" packet? */
- if (PIDGET (inferior_ptid) == MAGIC_NULL_PID)
+ if (ptid_equal (ptid, magic_null_ptid))
{
- /* MAGIC_NULL_PTID means that we don't have any active threads, so we
- don't have any PID numbers the inferior will understand. Make sure
- to only send forms that do not specify a PID. */
+ /* MAGIC_NULL_PTID means that we don't have any active threads,
+ so we don't have any TID numbers the inferior will
+ understand. Make sure to only send forms that do not specify
+ a TID. */
if (step && siggnal != TARGET_SIGNAL_0)
- outbuf = xstrprintf ("vCont;S%02x", siggnal);
+ xsnprintf (p, endp - p, "vCont;S%02x", siggnal);
else if (step)
- outbuf = xstrprintf ("vCont;s");
+ xsnprintf (p, endp - p, "vCont;s");
else if (siggnal != TARGET_SIGNAL_0)
- outbuf = xstrprintf ("vCont;C%02x", siggnal);
+ xsnprintf (p, endp - p, "vCont;C%02x", siggnal);
else
- outbuf = xstrprintf ("vCont;c");
+ xsnprintf (p, endp - p, "vCont;c");
}
- else if (pid == -1)
+ else if (ptid_equal (ptid, minus_one_ptid))
{
/* Resume all threads, with preference for INFERIOR_PTID. */
if (step && siggnal != TARGET_SIGNAL_0)
- outbuf = xstrprintf ("vCont;S%02x:%x;c", siggnal,
- PIDGET (inferior_ptid));
+ {
+ /* Step inferior_ptid with signal. */
+ p += xsnprintf (p, endp - p, "vCont;S%02x:", siggnal);
+ p = write_ptid (p, endp, inferior_ptid);
+ /* And continue others. */
+ p += xsnprintf (p, endp - p, ";c");
+ }
else if (step)
- outbuf = xstrprintf ("vCont;s:%x;c", PIDGET (inferior_ptid));
+ {
+ /* Step inferior_ptid. */
+ p += xsnprintf (p, endp - p, "vCont;s:");
+ p = write_ptid (p, endp, inferior_ptid);
+ /* And continue others. */
+ p += xsnprintf (p, endp - p, ";c");
+ }
else if (siggnal != TARGET_SIGNAL_0)
- outbuf = xstrprintf ("vCont;C%02x:%x;c", siggnal,
- PIDGET (inferior_ptid));
+ {
+ /* Continue inferior_ptid with signal. */
+ p += xsnprintf (p, endp - p, "vCont;C%02x:", siggnal);
+ p = write_ptid (p, endp, inferior_ptid);
+ /* And continue others. */
+ p += xsnprintf (p, endp - p, ";c");
+ }
else
- outbuf = xstrprintf ("vCont;c");
+ xsnprintf (p, endp - p, "vCont;c");
}
else
{
/* Scheduler locking; resume only PTID. */
if (step && siggnal != TARGET_SIGNAL_0)
- outbuf = xstrprintf ("vCont;S%02x:%x", siggnal, pid);
+ {
+ /* Step ptid with signal. */
+ p += xsnprintf (p, endp - p, "vCont;S%02x:", siggnal);
+ p = write_ptid (p, endp, ptid);
+ }
else if (step)
- outbuf = xstrprintf ("vCont;s:%x", pid);
+ {
+ /* Step ptid. */
+ p += xsnprintf (p, endp - p, "vCont;s:");
+ p = write_ptid (p, endp, ptid);
+ }
else if (siggnal != TARGET_SIGNAL_0)
- outbuf = xstrprintf ("vCont;C%02x:%x", siggnal, pid);
+ {
+ /* Continue ptid with signal. */
+ p += xsnprintf (p, endp - p, "vCont;C%02x:", siggnal);
+ p = write_ptid (p, endp, ptid);
+ }
else
- outbuf = xstrprintf ("vCont;c:%x", pid);
+ {
+ /* Continue ptid. */
+ p += xsnprintf (p, endp - p, "vCont;c:");
+ p = write_ptid (p, endp, ptid);
+ }
}
- gdb_assert (outbuf && strlen (outbuf) < get_remote_packet_size ());
- old_cleanup = make_cleanup (xfree, outbuf);
-
- putpkt (outbuf);
+ gdb_assert (strlen (rs->buf) < get_remote_packet_size ());
+ putpkt (rs->buf);
- do_cleanups (old_cleanup);
+ if (non_stop)
+ {
+ /* In non-stop, the stub replies to vCont with "OK". The stop
+ reply will be reported asynchronously by means of a `%Stop'
+ notification. */
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ if (strcmp (rs->buf, "OK") != 0)
+ error (_("Unexpected vCont reply in non-stop mode: %s"), rs->buf);
+ }
return 1;
}
{
struct remote_state *rs = get_remote_state ();
char *buf;
- int pid = PIDGET (ptid);
last_sent_signal = siggnal;
last_sent_step = step;
- /* A hook for when we need to do something at the last moment before
- resumption. */
- if (deprecated_target_resume_hook)
- (*deprecated_target_resume_hook) ();
-
/* Update the inferior on signals to silently pass, if they've changed. */
remote_pass_signals ();
/* The vCont packet doesn't need to specify threads via Hc. */
if (remote_vcont_resume (ptid, step, siggnal))
- return;
+ goto done;
- /* All other supported resume packets do use Hc, so call set_thread. */
- if (pid == -1)
- set_thread (0, 0); /* Run any thread. */
+ /* All other supported resume packets do use Hc, so set the continue
+ thread. */
+ if (ptid_equal (ptid, minus_one_ptid))
+ set_continue_thread (any_thread_ptid);
else
- set_thread (pid, 0); /* Run this thread. */
+ set_continue_thread (ptid);
buf = rs->buf;
- if (siggnal != TARGET_SIGNAL_0)
+ if (execution_direction == EXEC_REVERSE)
+ {
+ /* We don't pass signals to the target in reverse exec mode. */
+ if (info_verbose && siggnal != TARGET_SIGNAL_0)
+ warning (" - Can't pass signal %d to target in reverse: ignored.\n",
+ siggnal);
+ strcpy (buf, step ? "bs" : "bc");
+ }
+ else if (siggnal != TARGET_SIGNAL_0)
{
buf[0] = step ? 'S' : 'C';
buf[1] = tohex (((int) siggnal >> 4) & 0xf);
strcpy (buf, step ? "s" : "c");
putpkt (buf);
-}
-
-/* Same as remote_resume, but with async support. */
-static void
-remote_async_resume (ptid_t ptid, int step, enum target_signal siggnal)
-{
- remote_resume (ptid, step, siggnal);
+ done:
/* We are about to start executing the inferior, let's register it
with the event loop. NOTE: this is the one place where all the
execution commands end up. We could alternatively do this in each
NOT asynchronously. */
if (target_can_async_p ())
target_async (inferior_event_handler, 0);
- /* Tell the world that the target is now executing. */
- /* FIXME: cagney/1999-09-23: Is it the targets responsibility to set
- this? Instead, should the client of target just assume (for
- async targets) that the target is going to start executing? Is
- this information already found in the continuation block? */
- if (target_is_async_p ())
- target_executing = 1;
+
+ /* We've just told the target to resume. The remote server will
+ wait for the inferior to stop, and then send a stop reply. In
+ the mean time, we can't start another command/query ourselves
+ because the stub wouldn't be ready to process it. This applies
+ only to the base all-stop protocol, however. In non-stop (which
+ only supports vCont), the stub replies with an "OK", and is
+ immediate able to process further serial input. */
+ if (!non_stop)
+ rs->waiting_for_stop_reply = 1;
}
\f
static void
initialize_sigint_signal_handler (void)
{
- sigint_remote_token =
- create_async_signal_handler (async_remote_interrupt, NULL);
signal (SIGINT, handle_remote_sigint);
}
handle_remote_sigint (int sig)
{
signal (sig, handle_remote_sigint_twice);
- sigint_remote_twice_token =
- create_async_signal_handler (async_remote_interrupt_twice, NULL);
mark_async_signal_handler_wrapper (sigint_remote_token);
}
static void
handle_remote_sigint_twice (int sig)
{
- signal (sig, handle_sigint);
- sigint_remote_twice_token =
- create_async_signal_handler (inferior_event_handler_wrapper, NULL);
+ signal (sig, handle_remote_sigint);
mark_async_signal_handler_wrapper (sigint_remote_twice_token);
}
if (remote_debug)
fprintf_unfiltered (gdb_stdlog, "remote_interrupt called\n");
- target_stop ();
+ target_stop (inferior_ptid);
}
/* Perform interrupt, if the first attempt did not succeed. Just give
{
if (remote_debug)
fprintf_unfiltered (gdb_stdlog, "remote_interrupt_twice called\n");
- /* Do something only if the target was not killed by the previous
- cntl-C. */
- if (target_executing)
- {
- interrupt_query ();
- signal (SIGINT, handle_remote_sigint);
- }
+
+ interrupt_query ();
}
/* Reinstall the usual SIGINT handlers, after the target has
cleanup_sigint_signal_handler (void *dummy)
{
signal (SIGINT, handle_sigint);
- if (sigint_remote_twice_token)
- delete_async_signal_handler ((struct async_signal_handler **)
- &sigint_remote_twice_token);
- if (sigint_remote_token)
- delete_async_signal_handler ((struct async_signal_handler **)
- &sigint_remote_token);
}
/* Send ^C to target to halt it. Target will respond, and send us a
/* If this doesn't work, try more severe steps. */
signal (signo, remote_interrupt_twice);
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "remote_interrupt called\n");
-
- target_stop ();
+ gdb_call_async_signal_handler (sigint_remote_token, 1);
}
/* The user typed ^C twice. */
remote_interrupt_twice (int signo)
{
signal (signo, ofunc);
- interrupt_query ();
+ gdb_call_async_signal_handler (sigint_remote_twice_token, 1);
signal (signo, remote_interrupt);
}
+/* Non-stop version of target_stop. Uses `vCont;t' to stop a remote
+ thread, all threads of a remote process, or all threads of all
+ processes. */
+
+static void
+remote_stop_ns (ptid_t ptid)
+{
+ struct remote_state *rs = get_remote_state ();
+ char *p = rs->buf;
+ char *endp = rs->buf + get_remote_packet_size ();
+ struct stop_reply *reply, *next;
+
+ if (remote_protocol_packets[PACKET_vCont].support == PACKET_SUPPORT_UNKNOWN)
+ remote_vcont_probe (rs);
+
+ if (!rs->support_vCont_t)
+ error (_("Remote server does not support stopping threads"));
+
+ if (ptid_equal (ptid, minus_one_ptid))
+ p += xsnprintf (p, endp - p, "vCont;t");
+ else
+ {
+ ptid_t nptid;
+
+ /* Step inferior_ptid. */
+ p += xsnprintf (p, endp - p, "vCont;t:");
+
+ if (ptid_is_pid (ptid))
+ /* All (-1) threads of process. */
+ nptid = ptid_build (ptid_get_pid (ptid), 0, -1);
+ else
+ {
+ /* Small optimization: if we already have a stop reply for
+ this thread, no use in telling the stub we want this
+ stopped. */
+ if (peek_stop_reply (ptid))
+ return;
+
+ nptid = ptid;
+ }
+
+ p = write_ptid (p, endp, nptid);
+ }
+
+ /* In non-stop, we get an immediate OK reply. The stop reply will
+ come in asynchronously by notification. */
+ putpkt (rs->buf);
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ if (strcmp (rs->buf, "OK") != 0)
+ error (_("Stopping %s failed: %s"), target_pid_to_str (ptid), rs->buf);
+}
+
+/* All-stop version of target_stop. Sends a break or a ^C to stop the
+ remote target. It is undefined which thread of which process
+ reports the stop. */
+
+static void
+remote_stop_as (ptid_t ptid)
+{
+ struct remote_state *rs = get_remote_state ();
+
+ /* If the inferior is stopped already, but the core didn't know
+ about it yet, just ignore the request. The cached wait status
+ will be collected in remote_wait. */
+ if (rs->cached_wait_status)
+ return;
+
+ /* Send a break or a ^C, depending on user preference. */
+
+ if (remote_break)
+ serial_send_break (remote_desc);
+ else
+ serial_write (remote_desc, "\003", 1);
+}
+
/* This is the generic stop called via the target vector. When a target
interrupt is requested, either by the command line or the GUI, we
will eventually end up here. */
+
static void
-remote_stop (void)
+remote_stop (ptid_t ptid)
{
- /* Send a break or a ^C, depending on user preference. */
if (remote_debug)
fprintf_unfiltered (gdb_stdlog, "remote_stop called\n");
- if (remote_break)
- serial_send_break (remote_desc);
+ if (non_stop)
+ remote_stop_ns (ptid);
else
- serial_write (remote_desc, "\003", 1);
+ remote_stop_as (ptid);
}
/* Ask the user what to do when an interrupt is received. */
{
target_terminal_ours ();
- if (query ("Interrupted while waiting for the program.\n\
-Give up (and stop debugging it)? "))
+ if (target_can_async_p ())
{
- target_mourn_inferior ();
+ signal (SIGINT, handle_sigint);
deprecated_throw_reason (RETURN_QUIT);
}
+ else
+ {
+ if (query ("Interrupted while waiting for the program.\n\
+Give up (and stop debugging it)? "))
+ {
+ pop_target ();
+ deprecated_throw_reason (RETURN_QUIT);
+ }
+ }
target_terminal_inferior ();
}
is required. */
static void
-remote_async_terminal_inferior (void)
+remote_terminal_inferior (void)
{
+ if (!target_async_permitted)
+ /* Nothing to do. */
+ return;
+
/* FIXME: cagney/1999-09-27: Shouldn't need to test for
sync_execution here. This function should only be called when
GDB is resuming the inferior in the forground. A background
}
static void
-remote_async_terminal_ours (void)
+remote_terminal_ours (void)
{
- /* See FIXME in remote_async_terminal_inferior. */
+ if (!target_async_permitted)
+ /* Nothing to do. */
+ return;
+
+ /* See FIXME in remote_terminal_inferior. */
if (!sync_execution)
return;
- /* See FIXME in remote_async_terminal_inferior. */
+ /* See FIXME in remote_terminal_inferior. */
if (remote_async_terminal_ours_p)
return;
cleanup_sigint_signal_handler (NULL);
remote_async_terminal_ours_p = 1;
}
-/* If nonzero, ignore the next kill. */
-
-int kill_kludge;
-
void
remote_console_output (char *msg)
{
tb[1] = 0;
fputs_unfiltered (tb, gdb_stdtarg);
}
- gdb_flush (gdb_stdtarg);
-}
+ gdb_flush (gdb_stdtarg);
+ }
+
+typedef struct cached_reg
+{
+ int num;
+ gdb_byte data[MAX_REGISTER_SIZE];
+} cached_reg_t;
-/* Wait until the remote machine stops, then return,
- storing status in STATUS just as `wait' would.
- Returns "pid", which in the case of a multi-threaded
- remote OS, is the thread-id. */
+DEF_VEC_O(cached_reg_t);
-static ptid_t
-remote_wait (ptid_t ptid, struct target_waitstatus *status)
+struct stop_reply
{
- struct remote_state *rs = get_remote_state ();
- struct remote_arch_state *rsa = get_remote_arch_state ();
- ULONGEST thread_num = -1;
- ULONGEST addr;
+ struct stop_reply *next;
- status->kind = TARGET_WAITKIND_EXITED;
- status->value.integer = 0;
+ ptid_t ptid;
- while (1)
- {
- char *buf, *p;
+ struct target_waitstatus ws;
- ofunc = signal (SIGINT, remote_interrupt);
- getpkt (&rs->buf, &rs->buf_size, 1);
- signal (SIGINT, ofunc);
+ VEC(cached_reg_t) *regcache;
- buf = rs->buf;
+ int stopped_by_watchpoint_p;
+ CORE_ADDR watch_data_address;
- /* This is a hook for when we need to do something (perhaps the
- collection of trace data) every time the target stops. */
- if (deprecated_target_wait_loop_hook)
- (*deprecated_target_wait_loop_hook) ();
+ int solibs_changed;
+ int replay_event;
+};
- remote_stopped_by_watchpoint_p = 0;
+/* The list of already fetched and acknowledged stop events. */
+static struct stop_reply *stop_reply_queue;
- switch (buf[0])
- {
- case 'E': /* Error of some sort. */
- warning (_("Remote failure reply: %s"), buf);
- continue;
- case 'F': /* File-I/O request. */
- remote_fileio_request (buf);
- continue;
- case 'T': /* Status with PC, SP, FP, ... */
- {
- gdb_byte regs[MAX_REGISTER_SIZE];
+static struct stop_reply *
+stop_reply_xmalloc (void)
+{
+ struct stop_reply *r = XMALLOC (struct stop_reply);
+ r->next = NULL;
+ return r;
+}
- /* Expedited reply, containing Signal, {regno, reg} repeat. */
- /* format is: 'Tssn...:r...;n...:r...;n...:r...;#cc', where
- ss = signal number
- n... = register number
- r... = register contents
- */
- p = &buf[3]; /* after Txx */
+static void
+stop_reply_xfree (struct stop_reply *r)
+{
+ if (r != NULL)
+ {
+ VEC_free (cached_reg_t, r->regcache);
+ xfree (r);
+ }
+}
- while (*p)
- {
- char *p1;
- char *p_temp;
- int fieldsize;
- LONGEST pnum = 0;
+/* Discard all pending stop replies of inferior PID. If PID is -1,
+ discard everything. */
- /* If the packet contains a register number save it in
- pnum and set p1 to point to the character following
- it. Otherwise p1 points to p. */
+static void
+discard_pending_stop_replies (int pid)
+{
+ struct stop_reply *prev = NULL, *reply, *next;
- /* If this packet is an awatch packet, don't parse the
- 'a' as a register number. */
+ /* Discard the in-flight notification. */
+ if (pending_stop_reply != NULL
+ && (pid == -1
+ || ptid_get_pid (pending_stop_reply->ptid) == pid))
+ {
+ stop_reply_xfree (pending_stop_reply);
+ pending_stop_reply = NULL;
+ }
- if (strncmp (p, "awatch", strlen("awatch")) != 0)
- {
- /* Read the ``P'' register number. */
- pnum = strtol (p, &p_temp, 16);
- p1 = p_temp;
- }
- else
- p1 = p;
+ /* Discard the stop replies we have already pulled with
+ vStopped. */
+ for (reply = stop_reply_queue; reply; reply = next)
+ {
+ next = reply->next;
+ if (pid == -1
+ || ptid_get_pid (reply->ptid) == pid)
+ {
+ if (reply == stop_reply_queue)
+ stop_reply_queue = reply->next;
+ else
+ prev->next = reply->next;
- if (p1 == p) /* No register number present here. */
- {
- p1 = strchr (p, ':');
- if (p1 == NULL)
- error (_("Malformed packet(a) (missing colon): %s\n\
-Packet: '%s'\n"),
- p, buf);
- if (strncmp (p, "thread", p1 - p) == 0)
- {
- p_temp = unpack_varlen_hex (++p1, &thread_num);
- record_currthread (thread_num);
- p = p_temp;
- }
- else if ((strncmp (p, "watch", p1 - p) == 0)
- || (strncmp (p, "rwatch", p1 - p) == 0)
- || (strncmp (p, "awatch", p1 - p) == 0))
- {
- remote_stopped_by_watchpoint_p = 1;
- p = unpack_varlen_hex (++p1, &addr);
- remote_watch_data_address = (CORE_ADDR)addr;
- }
- else
- {
- /* Silently skip unknown optional info. */
- p_temp = strchr (p1 + 1, ';');
- if (p_temp)
- p = p_temp;
- }
- }
- else
- {
- struct packet_reg *reg = packet_reg_from_pnum (rsa, pnum);
- p = p1;
+ stop_reply_xfree (reply);
+ }
+ else
+ prev = reply;
+ }
+}
- if (*p++ != ':')
- error (_("Malformed packet(b) (missing colon): %s\n\
-Packet: '%s'\n"),
- p, buf);
+/* Cleanup wrapper. */
- if (reg == NULL)
- error (_("Remote sent bad register number %s: %s\n\
-Packet: '%s'\n"),
- phex_nz (pnum, 0), p, buf);
-
- fieldsize = hex2bin (p, regs,
- register_size (current_gdbarch,
- reg->regnum));
- p += 2 * fieldsize;
- if (fieldsize < register_size (current_gdbarch,
- reg->regnum))
- warning (_("Remote reply is too short: %s"), buf);
- regcache_raw_supply (current_regcache,
- reg->regnum, regs);
- }
+static void
+do_stop_reply_xfree (void *arg)
+{
+ struct stop_reply *r = arg;
+ stop_reply_xfree (r);
+}
- if (*p++ != ';')
- error (_("Remote register badly formatted: %s\nhere: %s"),
- buf, p);
- }
- }
- /* fall through */
- case 'S': /* Old style status, just signal only. */
- status->kind = TARGET_WAITKIND_STOPPED;
- status->value.sig = (enum target_signal)
- (((fromhex (buf[1])) << 4) + (fromhex (buf[2])));
+/* Look for a queued stop reply belonging to PTID. If one is found,
+ remove it from the queue, and return it. Returns NULL if none is
+ found. If there are still queued events left to process, tell the
+ event loop to get back to target_wait soon. */
- if (buf[3] == 'p')
- {
- thread_num = strtol ((const char *) &buf[4], NULL, 16);
- record_currthread (thread_num);
- }
- goto got_status;
- case 'W': /* Target exited. */
- {
- /* The remote process exited. */
- status->kind = TARGET_WAITKIND_EXITED;
- status->value.integer = (fromhex (buf[1]) << 4) + fromhex (buf[2]);
- goto got_status;
- }
- case 'X':
- status->kind = TARGET_WAITKIND_SIGNALLED;
- status->value.sig = (enum target_signal)
- (((fromhex (buf[1])) << 4) + (fromhex (buf[2])));
- kill_kludge = 1;
+static struct stop_reply *
+queued_stop_reply (ptid_t ptid)
+{
+ struct stop_reply *it, *prev;
+ struct stop_reply head;
- goto got_status;
- case 'O': /* Console output. */
- remote_console_output (buf + 1);
- continue;
- case '\0':
- if (last_sent_signal != TARGET_SIGNAL_0)
- {
- /* Zero length reply means that we tried 'S' or 'C' and
- the remote system doesn't support it. */
- target_terminal_ours_for_output ();
- printf_filtered
- ("Can't send signals to this remote system. %s not sent.\n",
- target_signal_to_name (last_sent_signal));
- last_sent_signal = TARGET_SIGNAL_0;
- target_terminal_inferior ();
-
- strcpy ((char *) buf, last_sent_step ? "s" : "c");
- putpkt ((char *) buf);
- continue;
- }
- /* else fallthrough */
- default:
- warning (_("Invalid remote reply: %s"), buf);
- continue;
- }
+ head.next = stop_reply_queue;
+ prev = &head;
+
+ it = head.next;
+
+ if (!ptid_equal (ptid, minus_one_ptid))
+ for (; it; prev = it, it = it->next)
+ if (ptid_equal (ptid, it->ptid))
+ break;
+
+ if (it)
+ {
+ prev->next = it->next;
+ it->next = NULL;
}
-got_status:
- if (thread_num != -1)
+
+ stop_reply_queue = head.next;
+
+ if (stop_reply_queue)
+ /* There's still at least an event left. */
+ mark_async_event_handler (remote_async_inferior_event_token);
+
+ return it;
+}
+
+/* Push a fully parsed stop reply in the stop reply queue. Since we
+ know that we now have at least one queued event left to pass to the
+ core side, tell the event loop to get back to target_wait soon. */
+
+static void
+push_stop_reply (struct stop_reply *new_event)
+{
+ struct stop_reply *event;
+
+ if (stop_reply_queue)
{
- return pid_to_ptid (thread_num);
+ for (event = stop_reply_queue;
+ event && event->next;
+ event = event->next)
+ ;
+
+ event->next = new_event;
}
- return inferior_ptid;
+ else
+ stop_reply_queue = new_event;
+
+ mark_async_event_handler (remote_async_inferior_event_token);
}
-/* Async version of remote_wait. */
-static ptid_t
-remote_async_wait (ptid_t ptid, struct target_waitstatus *status)
+/* Returns true if we have a stop reply for PTID. */
+
+static int
+peek_stop_reply (ptid_t ptid)
{
- struct remote_state *rs = get_remote_state ();
- struct remote_arch_state *rsa = get_remote_arch_state ();
- ULONGEST thread_num = -1;
- ULONGEST addr;
+ struct stop_reply *it;
- status->kind = TARGET_WAITKIND_EXITED;
- status->value.integer = 0;
+ for (it = stop_reply_queue; it; it = it->next)
+ if (ptid_equal (ptid, it->ptid))
+ {
+ if (it->ws.kind == TARGET_WAITKIND_STOPPED)
+ return 1;
+ }
- remote_stopped_by_watchpoint_p = 0;
+ return 0;
+}
- while (1)
- {
- char *buf, *p;
+/* Parse the stop reply in BUF. Either the function succeeds, and the
+ result is stored in EVENT, or throws an error. */
- if (!target_is_async_p ())
- ofunc = signal (SIGINT, remote_interrupt);
- /* FIXME: cagney/1999-09-27: If we're in async mode we should
- _never_ wait for ever -> test on target_is_async_p().
- However, before we do that we need to ensure that the caller
- knows how to take the target into/out of async mode. */
- getpkt (&rs->buf, &rs->buf_size, wait_forever_enabled_p);
- if (!target_is_async_p ())
- signal (SIGINT, ofunc);
+static void
+remote_parse_stop_reply (char *buf, struct stop_reply *event)
+{
+ struct remote_arch_state *rsa = get_remote_arch_state ();
+ ULONGEST addr;
+ char *p;
- buf = rs->buf;
+ event->ptid = null_ptid;
+ event->ws.kind = TARGET_WAITKIND_IGNORE;
+ event->ws.value.integer = 0;
+ event->solibs_changed = 0;
+ event->replay_event = 0;
+ event->stopped_by_watchpoint_p = 0;
+ event->regcache = NULL;
+
+ switch (buf[0])
+ {
+ case 'T': /* Status with PC, SP, FP, ... */
+ {
+ gdb_byte regs[MAX_REGISTER_SIZE];
- /* This is a hook for when we need to do something (perhaps the
- collection of trace data) every time the target stops. */
- if (deprecated_target_wait_loop_hook)
- (*deprecated_target_wait_loop_hook) ();
+ /* Expedited reply, containing Signal, {regno, reg} repeat. */
+ /* format is: 'Tssn...:r...;n...:r...;n...:r...;#cc', where
+ ss = signal number
+ n... = register number
+ r... = register contents
+ */
- switch (buf[0])
- {
- case 'E': /* Error of some sort. */
- warning (_("Remote failure reply: %s"), buf);
- continue;
- case 'F': /* File-I/O request. */
- remote_fileio_request (buf);
- continue;
- case 'T': /* Status with PC, SP, FP, ... */
+ p = &buf[3]; /* after Txx */
+ while (*p)
{
- gdb_byte regs[MAX_REGISTER_SIZE];
-
- /* Expedited reply, containing Signal, {regno, reg} repeat. */
- /* format is: 'Tssn...:r...;n...:r...;n...:r...;#cc', where
- ss = signal number
- n... = register number
- r... = register contents
- */
- p = &buf[3]; /* after Txx */
+ char *p1;
+ char *p_temp;
+ int fieldsize;
+ LONGEST pnum = 0;
- while (*p)
- {
- char *p1;
- char *p_temp;
- int fieldsize;
- long pnum = 0;
+ /* If the packet contains a register number, save it in
+ pnum and set p1 to point to the character following it.
+ Otherwise p1 points to p. */
- /* If the packet contains a register number, save it
- in pnum and set p1 to point to the character
- following it. Otherwise p1 points to p. */
+ /* If this packet is an awatch packet, don't parse the 'a'
+ as a register number. */
- /* If this packet is an awatch packet, don't parse the 'a'
- as a register number. */
+ if (strncmp (p, "awatch", strlen("awatch")) != 0)
+ {
+ /* Read the ``P'' register number. */
+ pnum = strtol (p, &p_temp, 16);
+ p1 = p_temp;
+ }
+ else
+ p1 = p;
- if (!strncmp (p, "awatch", strlen ("awatch")) != 0)
+ if (p1 == p) /* No register number present here. */
+ {
+ p1 = strchr (p, ':');
+ if (p1 == NULL)
+ error (_("Malformed packet(a) (missing colon): %s\n\
+Packet: '%s'\n"),
+ p, buf);
+ if (strncmp (p, "thread", p1 - p) == 0)
+ event->ptid = read_ptid (++p1, &p);
+ else if ((strncmp (p, "watch", p1 - p) == 0)
+ || (strncmp (p, "rwatch", p1 - p) == 0)
+ || (strncmp (p, "awatch", p1 - p) == 0))
{
- /* Read the register number. */
- pnum = strtol (p, &p_temp, 16);
- p1 = p_temp;
+ event->stopped_by_watchpoint_p = 1;
+ p = unpack_varlen_hex (++p1, &addr);
+ event->watch_data_address = (CORE_ADDR) addr;
}
- else
- p1 = p;
+ else if (strncmp (p, "library", p1 - p) == 0)
+ {
+ p1++;
+ p_temp = p1;
+ while (*p_temp && *p_temp != ';')
+ p_temp++;
- if (p1 == p) /* No register number present here. */
+ event->solibs_changed = 1;
+ p = p_temp;
+ }
+ else if (strncmp (p, "replaylog", p1 - p) == 0)
{
- p1 = strchr (p, ':');
- if (p1 == NULL)
- error (_("Malformed packet(a) (missing colon): %s\n\
-Packet: '%s'\n"),
- p, buf);
- if (strncmp (p, "thread", p1 - p) == 0)
- {
- p_temp = unpack_varlen_hex (++p1, &thread_num);
- record_currthread (thread_num);
- p = p_temp;
- }
- else if ((strncmp (p, "watch", p1 - p) == 0)
- || (strncmp (p, "rwatch", p1 - p) == 0)
- || (strncmp (p, "awatch", p1 - p) == 0))
- {
- remote_stopped_by_watchpoint_p = 1;
- p = unpack_varlen_hex (++p1, &addr);
- remote_watch_data_address = (CORE_ADDR)addr;
- }
- else
- {
- /* Silently skip unknown optional info. */
- p_temp = strchr (p1 + 1, ';');
- if (p_temp)
- p = p_temp;
- }
+ /* NO_HISTORY event.
+ p1 will indicate "begin" or "end", but
+ it makes no difference for now, so ignore it. */
+ event->replay_event = 1;
+ p_temp = strchr (p1 + 1, ';');
+ if (p_temp)
+ p = p_temp;
}
-
else
{
- struct packet_reg *reg = packet_reg_from_pnum (rsa, pnum);
- p = p1;
- if (*p++ != ':')
- error (_("Malformed packet(b) (missing colon): %s\n\
+ /* Silently skip unknown optional info. */
+ p_temp = strchr (p1 + 1, ';');
+ if (p_temp)
+ p = p_temp;
+ }
+ }
+ else
+ {
+ struct packet_reg *reg = packet_reg_from_pnum (rsa, pnum);
+ cached_reg_t cached_reg;
+
+ cached_reg.num = reg->regnum;
+
+ p = p1;
+
+ if (*p != ':')
+ error (_("Malformed packet(b) (missing colon): %s\n\
Packet: '%s'\n"),
- p, buf);
+ p, buf);
+ ++p;
- if (reg == NULL)
- error (_("Remote sent bad register number %ld: %s\n\
+ if (reg == NULL)
+ error (_("Remote sent bad register number %s: %s\n\
Packet: '%s'\n"),
- pnum, p, buf);
-
- fieldsize = hex2bin (p, regs,
- register_size (current_gdbarch,
- reg->regnum));
- p += 2 * fieldsize;
- if (fieldsize < register_size (current_gdbarch,
- reg->regnum))
- warning (_("Remote reply is too short: %s"), buf);
- regcache_raw_supply (current_regcache, reg->regnum, regs);
- }
+ phex_nz (pnum, 0), p, buf);
+
+ fieldsize = hex2bin (p, cached_reg.data,
+ register_size (target_gdbarch,
+ reg->regnum));
+ p += 2 * fieldsize;
+ if (fieldsize < register_size (target_gdbarch,
+ reg->regnum))
+ warning (_("Remote reply is too short: %s"), buf);
- if (*p++ != ';')
- error (_("Remote register badly formatted: %s\nhere: %s"),
- buf, p);
+ VEC_safe_push (cached_reg_t, event->regcache, &cached_reg);
}
+
+ if (*p != ';')
+ error (_("Remote register badly formatted: %s\nhere: %s"),
+ buf, p);
+ ++p;
}
- /* fall through */
- case 'S': /* Old style status, just signal only. */
- status->kind = TARGET_WAITKIND_STOPPED;
- status->value.sig = (enum target_signal)
+ }
+ /* fall through */
+ case 'S': /* Old style status, just signal only. */
+ if (event->solibs_changed)
+ event->ws.kind = TARGET_WAITKIND_LOADED;
+ else if (event->replay_event)
+ event->ws.kind = TARGET_WAITKIND_NO_HISTORY;
+ else
+ {
+ event->ws.kind = TARGET_WAITKIND_STOPPED;
+ event->ws.value.sig = (enum target_signal)
(((fromhex (buf[1])) << 4) + (fromhex (buf[2])));
+ }
+ break;
+ case 'W': /* Target exited. */
+ case 'X':
+ {
+ char *p;
+ int pid;
+ ULONGEST value;
- if (buf[3] == 'p')
- {
- thread_num = strtol ((const char *) &buf[4], NULL, 16);
- record_currthread (thread_num);
- }
- goto got_status;
- case 'W': /* Target exited. */
+ /* GDB used to accept only 2 hex chars here. Stubs should
+ only send more if they detect GDB supports multi-process
+ support. */
+ p = unpack_varlen_hex (&buf[1], &value);
+
+ if (buf[0] == 'W')
{
/* The remote process exited. */
- status->kind = TARGET_WAITKIND_EXITED;
- status->value.integer = (fromhex (buf[1]) << 4) + fromhex (buf[2]);
- goto got_status;
+ event->ws.kind = TARGET_WAITKIND_EXITED;
+ event->ws.value.integer = value;
+ }
+ else
+ {
+ /* The remote process exited with a signal. */
+ event->ws.kind = TARGET_WAITKIND_SIGNALLED;
+ event->ws.value.sig = (enum target_signal) value;
}
- case 'X':
- status->kind = TARGET_WAITKIND_SIGNALLED;
- status->value.sig = (enum target_signal)
- (((fromhex (buf[1])) << 4) + (fromhex (buf[2])));
- kill_kludge = 1;
-
- goto got_status;
- case 'O': /* Console output. */
- remote_console_output (buf + 1);
- /* Return immediately to the event loop. The event loop will
- still be waiting on the inferior afterwards. */
- status->kind = TARGET_WAITKIND_IGNORE;
- goto got_status;
- case '\0':
- if (last_sent_signal != TARGET_SIGNAL_0)
- {
- /* Zero length reply means that we tried 'S' or 'C' and
- the remote system doesn't support it. */
- target_terminal_ours_for_output ();
- printf_filtered
- ("Can't send signals to this remote system. %s not sent.\n",
- target_signal_to_name (last_sent_signal));
- last_sent_signal = TARGET_SIGNAL_0;
- target_terminal_inferior ();
-
- strcpy ((char *) buf, last_sent_step ? "s" : "c");
- putpkt ((char *) buf);
- continue;
- }
- /* else fallthrough */
- default:
- warning (_("Invalid remote reply: %s"), buf);
- continue;
- }
- }
-got_status:
- if (thread_num != -1)
- {
- return pid_to_ptid (thread_num);
- }
- return inferior_ptid;
-}
-/* Fetch a single register using a 'p' packet. */
+ /* If no process is specified, assume inferior_ptid. */
+ pid = ptid_get_pid (inferior_ptid);
+ if (*p == '\0')
+ ;
+ else if (*p == ';')
+ {
+ p++;
+
+ if (p == '\0')
+ ;
+ else if (strncmp (p,
+ "process:", sizeof ("process:") - 1) == 0)
+ {
+ ULONGEST upid;
+ p += sizeof ("process:") - 1;
+ unpack_varlen_hex (p, &upid);
+ pid = upid;
+ }
+ else
+ error (_("unknown stop reply packet: %s"), buf);
+ }
+ else
+ error (_("unknown stop reply packet: %s"), buf);
+ event->ptid = pid_to_ptid (pid);
+ }
+ break;
+ }
+
+ if (non_stop && ptid_equal (event->ptid, null_ptid))
+ error (_("No process or thread specified in stop reply: %s"), buf);
+}
+
+/* When the stub wants to tell GDB about a new stop reply, it sends a
+ stop notification (%Stop). Those can come it at any time, hence,
+ we have to make sure that any pending putpkt/getpkt sequence we're
+ making is finished, before querying the stub for more events with
+ vStopped. E.g., if we started a vStopped sequence immediatelly
+ upon receiving the %Stop notification, something like this could
+ happen:
+
+ 1.1) --> Hg 1
+ 1.2) <-- OK
+ 1.3) --> g
+ 1.4) <-- %Stop
+ 1.5) --> vStopped
+ 1.6) <-- (registers reply to step #1.3)
+
+ Obviously, the reply in step #1.6 would be unexpected to a vStopped
+ query.
+
+ To solve this, whenever we parse a %Stop notification sucessfully,
+ we mark the REMOTE_ASYNC_GET_PENDING_EVENTS_TOKEN, and carry on
+ doing whatever we were doing:
+
+ 2.1) --> Hg 1
+ 2.2) <-- OK
+ 2.3) --> g
+ 2.4) <-- %Stop
+ <GDB marks the REMOTE_ASYNC_GET_PENDING_EVENTS_TOKEN>
+ 2.5) <-- (registers reply to step #2.3)
+
+ Eventualy after step #2.5, we return to the event loop, which
+ notices there's an event on the
+ REMOTE_ASYNC_GET_PENDING_EVENTS_TOKEN event and calls the
+ associated callback --- the function below. At this point, we're
+ always safe to start a vStopped sequence. :
+
+ 2.6) --> vStopped
+ 2.7) <-- T05 thread:2
+ 2.8) --> vStopped
+ 2.9) --> OK
+*/
+
+static void
+remote_get_pending_stop_replies (void)
+{
+ struct remote_state *rs = get_remote_state ();
+ int ret;
+
+ if (pending_stop_reply)
+ {
+ /* acknowledge */
+ putpkt ("vStopped");
+
+ /* Now we can rely on it. */
+ push_stop_reply (pending_stop_reply);
+ pending_stop_reply = NULL;
+
+ while (1)
+ {
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ if (strcmp (rs->buf, "OK") == 0)
+ break;
+ else
+ {
+ struct cleanup *old_chain;
+ struct stop_reply *stop_reply = stop_reply_xmalloc ();
+
+ old_chain = make_cleanup (do_stop_reply_xfree, stop_reply);
+ remote_parse_stop_reply (rs->buf, stop_reply);
+
+ /* acknowledge */
+ putpkt ("vStopped");
+
+ if (stop_reply->ws.kind != TARGET_WAITKIND_IGNORE)
+ {
+ /* Now we can rely on it. */
+ discard_cleanups (old_chain);
+ push_stop_reply (stop_reply);
+ }
+ else
+ /* We got an unknown stop reply. */
+ do_cleanups (old_chain);
+ }
+ }
+ }
+}
+
+
+/* Called when it is decided that STOP_REPLY holds the info of the
+ event that is to be returned to the core. This function always
+ destroys STOP_REPLY. */
+
+static ptid_t
+process_stop_reply (struct stop_reply *stop_reply,
+ struct target_waitstatus *status)
+{
+ ptid_t ptid;
+
+ *status = stop_reply->ws;
+ ptid = stop_reply->ptid;
+
+ /* If no thread/process was reported by the stub, assume the current
+ inferior. */
+ if (ptid_equal (ptid, null_ptid))
+ ptid = inferior_ptid;
+
+ if (status->kind == TARGET_WAITKIND_EXITED
+ || status->kind == TARGET_WAITKIND_SIGNALLED)
+ {
+ int pid = ptid_get_pid (ptid);
+ delete_inferior (pid);
+ }
+ else
+ notice_new_inferiors (ptid);
+
+ /* Expedited registers. */
+ if (stop_reply->regcache)
+ {
+ cached_reg_t *reg;
+ int ix;
+
+ for (ix = 0;
+ VEC_iterate(cached_reg_t, stop_reply->regcache, ix, reg);
+ ix++)
+ regcache_raw_supply (get_thread_regcache (ptid),
+ reg->num, reg->data);
+ VEC_free (cached_reg_t, stop_reply->regcache);
+ }
+
+ remote_stopped_by_watchpoint_p = stop_reply->stopped_by_watchpoint_p;
+ remote_watch_data_address = stop_reply->watch_data_address;
+
+ stop_reply_xfree (stop_reply);
+ return ptid;
+}
+
+/* The non-stop mode version of target_wait. */
+
+static ptid_t
+remote_wait_ns (ptid_t ptid, struct target_waitstatus *status)
+{
+ struct remote_state *rs = get_remote_state ();
+ struct remote_arch_state *rsa = get_remote_arch_state ();
+ ptid_t event_ptid = null_ptid;
+ struct stop_reply *stop_reply;
+ int ret;
+
+ /* If in non-stop mode, get out of getpkt even if a
+ notification is received. */
+
+ ret = getpkt_or_notif_sane (&rs->buf, &rs->buf_size,
+ 0 /* forever */);
+ while (1)
+ {
+ if (ret != -1)
+ switch (rs->buf[0])
+ {
+ case 'E': /* Error of some sort. */
+ /* We're out of sync with the target now. Did it continue
+ or not? We can't tell which thread it was in non-stop,
+ so just ignore this. */
+ warning (_("Remote failure reply: %s"), rs->buf);
+ break;
+ case 'O': /* Console output. */
+ remote_console_output (rs->buf + 1);
+ break;
+ default:
+ warning (_("Invalid remote reply: %s"), rs->buf);
+ break;
+ }
+
+ /* Acknowledge a pending stop reply that may have arrived in the
+ mean time. */
+ if (pending_stop_reply != NULL)
+ remote_get_pending_stop_replies ();
+
+ /* If indeed we noticed a stop reply, we're done. */
+ stop_reply = queued_stop_reply (ptid);
+ if (stop_reply != NULL)
+ return process_stop_reply (stop_reply, status);
+
+ /* Still no event. If we're in asynchronous mode, then just
+ return to the event loop. */
+ if (remote_is_async_p ())
+ {
+ status->kind = TARGET_WAITKIND_IGNORE;
+ return minus_one_ptid;
+ }
+
+ /* Otherwise, asynchronous mode is masked, so do a blocking
+ wait. */
+ ret = getpkt_or_notif_sane (&rs->buf, &rs->buf_size,
+ 1 /* forever */);
+ }
+}
+
+/* Wait until the remote machine stops, then return, storing status in
+ STATUS just as `wait' would. */
+
+static ptid_t
+remote_wait_as (ptid_t ptid, struct target_waitstatus *status)
+{
+ struct remote_state *rs = get_remote_state ();
+ struct remote_arch_state *rsa = get_remote_arch_state ();
+ ptid_t event_ptid = null_ptid;
+ ULONGEST addr;
+ int solibs_changed = 0;
+ char *buf, *p;
+ struct stop_reply *stop_reply;
+
+ status->kind = TARGET_WAITKIND_IGNORE;
+ status->value.integer = 0;
+
+ stop_reply = queued_stop_reply (ptid);
+ if (stop_reply != NULL)
+ return process_stop_reply (stop_reply, status);
+
+ if (rs->cached_wait_status)
+ /* Use the cached wait status, but only once. */
+ rs->cached_wait_status = 0;
+ else
+ {
+ int ret;
+
+ if (!target_is_async_p ())
+ {
+ ofunc = signal (SIGINT, remote_interrupt);
+ /* If the user hit C-c before this packet, or between packets,
+ pretend that it was hit right here. */
+ if (quit_flag)
+ {
+ quit_flag = 0;
+ remote_interrupt (SIGINT);
+ }
+ }
+
+ /* FIXME: cagney/1999-09-27: If we're in async mode we should
+ _never_ wait for ever -> test on target_is_async_p().
+ However, before we do that we need to ensure that the caller
+ knows how to take the target into/out of async mode. */
+ ret = getpkt_sane (&rs->buf, &rs->buf_size, wait_forever_enabled_p);
+ if (!target_is_async_p ())
+ signal (SIGINT, ofunc);
+ }
+
+ buf = rs->buf;
+
+ remote_stopped_by_watchpoint_p = 0;
+
+ /* We got something. */
+ rs->waiting_for_stop_reply = 0;
+
+ switch (buf[0])
+ {
+ case 'E': /* Error of some sort. */
+ /* We're out of sync with the target now. Did it continue or
+ not? Not is more likely, so report a stop. */
+ warning (_("Remote failure reply: %s"), buf);
+ status->kind = TARGET_WAITKIND_STOPPED;
+ status->value.sig = TARGET_SIGNAL_0;
+ break;
+ case 'F': /* File-I/O request. */
+ remote_fileio_request (buf);
+ break;
+ case 'T': case 'S': case 'X': case 'W':
+ {
+ struct stop_reply *stop_reply;
+ struct cleanup *old_chain;
+
+ stop_reply = stop_reply_xmalloc ();
+ old_chain = make_cleanup (do_stop_reply_xfree, stop_reply);
+ remote_parse_stop_reply (buf, stop_reply);
+ discard_cleanups (old_chain);
+ event_ptid = process_stop_reply (stop_reply, status);
+ break;
+ }
+ case 'O': /* Console output. */
+ remote_console_output (buf + 1);
+
+ /* The target didn't really stop; keep waiting. */
+ rs->waiting_for_stop_reply = 1;
+
+ break;
+ case '\0':
+ if (last_sent_signal != TARGET_SIGNAL_0)
+ {
+ /* Zero length reply means that we tried 'S' or 'C' and the
+ remote system doesn't support it. */
+ target_terminal_ours_for_output ();
+ printf_filtered
+ ("Can't send signals to this remote system. %s not sent.\n",
+ target_signal_to_name (last_sent_signal));
+ last_sent_signal = TARGET_SIGNAL_0;
+ target_terminal_inferior ();
+
+ strcpy ((char *) buf, last_sent_step ? "s" : "c");
+ putpkt ((char *) buf);
+
+ /* We just told the target to resume, so a stop reply is in
+ order. */
+ rs->waiting_for_stop_reply = 1;
+ break;
+ }
+ /* else fallthrough */
+ default:
+ warning (_("Invalid remote reply: %s"), buf);
+ /* Keep waiting. */
+ rs->waiting_for_stop_reply = 1;
+ break;
+ }
+
+ if (status->kind == TARGET_WAITKIND_IGNORE)
+ /* Nothing interesting happened. */
+ return minus_one_ptid;
+ else if (status->kind != TARGET_WAITKIND_EXITED
+ && status->kind != TARGET_WAITKIND_SIGNALLED)
+ {
+ if (!ptid_equal (event_ptid, null_ptid))
+ record_currthread (event_ptid);
+ else
+ event_ptid = inferior_ptid;
+ }
+ else
+ /* A process exit. Invalidate our notion of current thread. */
+ record_currthread (minus_one_ptid);
+
+ return event_ptid;
+}
+
+/* Wait until the remote machine stops, then return, storing status in
+ STATUS just as `wait' would. */
+
+static ptid_t
+remote_wait (ptid_t ptid, struct target_waitstatus *status)
+{
+ ptid_t event_ptid;
+
+ if (non_stop)
+ event_ptid = remote_wait_ns (ptid, status);
+ else
+ {
+ /* In synchronous mode, keep waiting until the target stops. In
+ asynchronous mode, always return to the event loop. */
+
+ do
+ {
+ event_ptid = remote_wait_as (ptid, status);
+ }
+ while (status->kind == TARGET_WAITKIND_IGNORE
+ && !target_can_async_p ());
+ }
+
+ if (target_can_async_p ())
+ {
+ /* If there are are events left in the queue tell the event loop
+ to return here. */
+ if (stop_reply_queue)
+ mark_async_event_handler (remote_async_inferior_event_token);
+ }
+
+ return event_ptid;
+}
+
+/* Fetch a single register using a 'p' packet. */
static int
-fetch_register_using_p (struct packet_reg *reg)
+fetch_register_using_p (struct regcache *regcache, struct packet_reg *reg)
{
struct remote_state *rs = get_remote_state ();
char *buf, *p;
return 0;
case PACKET_ERROR:
error (_("Could not fetch register \"%s\""),
- gdbarch_register_name (current_gdbarch, reg->regnum));
+ gdbarch_register_name (get_regcache_arch (regcache), reg->regnum));
}
/* If this register is unfetchable, tell the regcache. */
if (buf[0] == 'x')
{
- regcache_raw_supply (current_regcache, reg->regnum, NULL);
- set_register_cached (reg->regnum, -1);
+ regcache_raw_supply (regcache, reg->regnum, NULL);
return 1;
}
regp[i++] = fromhex (p[0]) * 16 + fromhex (p[1]);
p += 2;
}
- regcache_raw_supply (current_regcache, reg->regnum, regp);
+ regcache_raw_supply (regcache, reg->regnum, regp);
return 1;
}
/* Fetch the registers included in the target's 'g' packet. */
-static void
-fetch_registers_using_g (void)
+static int
+send_g_packet (void)
{
struct remote_state *rs = get_remote_state ();
- struct remote_arch_state *rsa = get_remote_arch_state ();
int i, buf_len;
char *p;
char *regs;
sprintf (rs->buf, "g");
remote_send (&rs->buf, &rs->buf_size);
+ /* We can get out of synch in various cases. If the first character
+ in the buffer is not a hex character, assume that has happened
+ and try to fetch another packet to read. */
+ while ((rs->buf[0] < '0' || rs->buf[0] > '9')
+ && (rs->buf[0] < 'A' || rs->buf[0] > 'F')
+ && (rs->buf[0] < 'a' || rs->buf[0] > 'f')
+ && rs->buf[0] != 'x') /* New: unavailable register value. */
+ {
+ if (remote_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "Bad register packet; fetching a new packet\n");
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ }
+
buf_len = strlen (rs->buf);
/* Sanity check the received packet. */
if (buf_len % 2 != 0)
error (_("Remote 'g' packet reply is of odd length: %s"), rs->buf);
- if (REGISTER_BYTES_OK_P () && !REGISTER_BYTES_OK (buf_len / 2))
- error (_("Remote 'g' packet reply is wrong length: %s"), rs->buf);
+
+ return buf_len / 2;
+}
+
+static void
+process_g_packet (struct regcache *regcache)
+{
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ struct remote_state *rs = get_remote_state ();
+ struct remote_arch_state *rsa = get_remote_arch_state ();
+ int i, buf_len;
+ char *p;
+ char *regs;
+
+ buf_len = strlen (rs->buf);
+
+ /* Further sanity checks, with knowledge of the architecture. */
if (buf_len > 2 * rsa->sizeof_g_packet)
error (_("Remote 'g' packet reply is too long: %s"), rs->buf);
{
rsa->sizeof_g_packet = buf_len / 2;
- for (i = 0; i < NUM_REGS; i++)
+ for (i = 0; i < gdbarch_num_regs (gdbarch); i++)
{
if (rsa->regs[i].pnum == -1)
continue;
/* Unimplemented registers read as all bits zero. */
memset (regs, 0, rsa->sizeof_g_packet);
- /* We can get out of synch in various cases. If the first character
- in the buffer is not a hex character, assume that has happened
- and try to fetch another packet to read. */
- while ((rs->buf[0] < '0' || rs->buf[0] > '9')
- && (rs->buf[0] < 'A' || rs->buf[0] > 'F')
- && (rs->buf[0] < 'a' || rs->buf[0] > 'f')
- && rs->buf[0] != 'x') /* New: unavailable register value. */
- {
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog,
- "Bad register packet; fetching a new packet\n");
- getpkt (&rs->buf, &rs->buf_size, 0);
- }
-
/* Reply describes registers byte by byte, each byte encoded as two
hex characters. Suck them all up, then supply them to the
register cacheing/storage mechanism. */
{
int i;
- for (i = 0; i < NUM_REGS; i++)
+ for (i = 0; i < gdbarch_num_regs (gdbarch); i++)
{
struct packet_reg *r = &rsa->regs[i];
if (r->in_g_packet)
gdb_assert (r->offset * 2 < strlen (rs->buf));
/* The register isn't available, mark it as such (at
the same time setting the value to zero). */
- regcache_raw_supply (current_regcache, r->regnum, NULL);
- set_register_cached (i, -1);
+ regcache_raw_supply (regcache, r->regnum, NULL);
}
else
- regcache_raw_supply (current_regcache, r->regnum,
+ regcache_raw_supply (regcache, r->regnum,
regs + r->offset);
}
}
}
static void
-remote_fetch_registers (int regnum)
+fetch_registers_using_g (struct regcache *regcache)
+{
+ send_g_packet ();
+ process_g_packet (regcache);
+}
+
+static void
+remote_fetch_registers (struct regcache *regcache, int regnum)
{
struct remote_state *rs = get_remote_state ();
struct remote_arch_state *rsa = get_remote_arch_state ();
int i;
- set_thread (PIDGET (inferior_ptid), 1);
+ set_general_thread (inferior_ptid);
if (regnum >= 0)
{
contents, so fall back to 'p'. */
if (reg->in_g_packet)
{
- fetch_registers_using_g ();
+ fetch_registers_using_g (regcache);
if (reg->in_g_packet)
return;
}
- if (fetch_register_using_p (reg))
+ if (fetch_register_using_p (regcache, reg))
return;
/* This register is not available. */
- regcache_raw_supply (current_regcache, reg->regnum, NULL);
- set_register_cached (reg->regnum, -1);
+ regcache_raw_supply (regcache, reg->regnum, NULL);
return;
}
- fetch_registers_using_g ();
+ fetch_registers_using_g (regcache);
- for (i = 0; i < NUM_REGS; i++)
+ for (i = 0; i < gdbarch_num_regs (get_regcache_arch (regcache)); i++)
if (!rsa->regs[i].in_g_packet)
- if (!fetch_register_using_p (&rsa->regs[i]))
+ if (!fetch_register_using_p (regcache, &rsa->regs[i]))
{
/* This register is not available. */
- regcache_raw_supply (current_regcache, i, NULL);
- set_register_cached (i, -1);
+ regcache_raw_supply (regcache, i, NULL);
}
}
first. */
static void
-remote_prepare_to_store (void)
+remote_prepare_to_store (struct regcache *regcache)
{
struct remote_arch_state *rsa = get_remote_arch_state ();
int i;
case PACKET_DISABLE:
case PACKET_SUPPORT_UNKNOWN:
/* Make sure all the necessary registers are cached. */
- for (i = 0; i < NUM_REGS; i++)
+ for (i = 0; i < gdbarch_num_regs (get_regcache_arch (regcache)); i++)
if (rsa->regs[i].in_g_packet)
- regcache_raw_read (current_regcache, rsa->regs[i].regnum, buf);
+ regcache_raw_read (regcache, rsa->regs[i].regnum, buf);
break;
case PACKET_ENABLE:
break;
packet was not recognized. */
static int
-store_register_using_P (struct packet_reg *reg)
+store_register_using_P (const struct regcache *regcache, struct packet_reg *reg)
{
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct remote_state *rs = get_remote_state ();
struct remote_arch_state *rsa = get_remote_arch_state ();
/* Try storing a single register. */
xsnprintf (buf, get_remote_packet_size (), "P%s=", phex_nz (reg->pnum, 0));
p = buf + strlen (buf);
- regcache_raw_collect (current_regcache, reg->regnum, regp);
- bin2hex (regp, p, register_size (current_gdbarch, reg->regnum));
+ regcache_raw_collect (regcache, reg->regnum, regp);
+ bin2hex (regp, p, register_size (gdbarch, reg->regnum));
remote_send (&rs->buf, &rs->buf_size);
switch (packet_ok (rs->buf, &remote_protocol_packets[PACKET_P]))
return 1;
case PACKET_ERROR:
error (_("Could not write register \"%s\""),
- gdbarch_register_name (current_gdbarch, reg->regnum));
+ gdbarch_register_name (gdbarch, reg->regnum));
case PACKET_UNKNOWN:
return 0;
default:
contents of the register cache buffer. FIXME: ignores errors. */
static void
-store_registers_using_G (void)
+store_registers_using_G (const struct regcache *regcache)
{
struct remote_state *rs = get_remote_state ();
struct remote_arch_state *rsa = get_remote_arch_state ();
int i;
regs = alloca (rsa->sizeof_g_packet);
memset (regs, 0, rsa->sizeof_g_packet);
- for (i = 0; i < NUM_REGS; i++)
+ for (i = 0; i < gdbarch_num_regs (get_regcache_arch (regcache)); i++)
{
struct packet_reg *r = &rsa->regs[i];
if (r->in_g_packet)
- regcache_raw_collect (current_regcache, r->regnum, regs + r->offset);
+ regcache_raw_collect (regcache, r->regnum, regs + r->offset);
}
}
of the register cache buffer. FIXME: ignores errors. */
static void
-remote_store_registers (int regnum)
+remote_store_registers (struct regcache *regcache, int regnum)
{
struct remote_state *rs = get_remote_state ();
struct remote_arch_state *rsa = get_remote_arch_state ();
int i;
- set_thread (PIDGET (inferior_ptid), 1);
+ set_general_thread (inferior_ptid);
if (regnum >= 0)
{
possible; we often change only a small number of registers.
Sometimes we change a larger number; we'd need help from a
higher layer to know to use 'G'. */
- if (store_register_using_P (reg))
+ if (store_register_using_P (regcache, reg))
return;
/* For now, don't complain if we have no way to write the
if (!reg->in_g_packet)
return;
- store_registers_using_G ();
+ store_registers_using_G (regcache);
return;
}
- store_registers_using_G ();
+ store_registers_using_G (regcache);
- for (i = 0; i < NUM_REGS; i++)
+ for (i = 0; i < gdbarch_num_regs (get_regcache_arch (regcache)); i++)
if (!rsa->regs[i].in_g_packet)
- if (!store_register_using_P (&rsa->regs[i]))
+ if (!store_register_using_P (regcache, &rsa->regs[i]))
/* See above for why we do not issue an error here. */
continue;
}
static CORE_ADDR
remote_address_masked (CORE_ADDR addr)
{
- if (remote_address_size > 0
- && remote_address_size < (sizeof (ULONGEST) * 8))
+ int address_size = remote_address_size;
+ /* If "remoteaddresssize" was not set, default to target address size. */
+ if (!address_size)
+ address_size = gdbarch_addr_bit (target_gdbarch);
+
+ if (address_size > 0
+ && address_size < (sizeof (ULONGEST) * 8))
{
/* Only create a mask when that mask can safely be constructed
in a ULONGEST variable. */
ULONGEST mask = 1;
- mask = (mask << remote_address_size) - 1;
+ mask = (mask << address_size) - 1;
addr &= mask;
}
return addr;
internal_error (__FILE__, __LINE__,
"remote_write_bytes_aux: bad packet format");
- /* Should this be the selected frame? */
- gdbarch_remote_translate_xfer_address (current_gdbarch,
- current_regcache,
- memaddr, len,
- &memaddr, &len);
-
if (len <= 0)
return 0;
int max_buf_size; /* Max size of packet output buffer. */
int origlen;
- /* Should this be the selected frame? */
- gdbarch_remote_translate_xfer_address (current_gdbarch,
- current_regcache,
- memaddr, len,
- &memaddr, &len);
-
if (len <= 0)
return 0;
}
return origlen;
}
+\f
+
+/* Remote notification handler. */
+
+static void
+handle_notification (char *buf, size_t length)
+{
+ if (strncmp (buf, "Stop:", 5) == 0)
+ {
+ if (pending_stop_reply)
+ /* We've already parsed the in-flight stop-reply, but the stub
+ for some reason thought we didn't, possibly due to timeout
+ on its side. Just ignore it. */
+ ;
+ else
+ {
+ struct cleanup *old_chain;
+ struct stop_reply *reply = stop_reply_xmalloc ();
+ old_chain = make_cleanup (do_stop_reply_xfree, reply);
+
+ remote_parse_stop_reply (buf + 5, reply);
+
+ discard_cleanups (old_chain);
+
+ /* Be careful to only set it after parsing, since an error
+ may be thrown then. */
+ pending_stop_reply = reply;
+
+ /* Notify the event loop there's a stop reply to acknowledge
+ and that there may be more events to fetch. */
+ mark_async_event_handler (remote_async_get_pending_events_token);
+ }
+ }
+ else
+ /* We ignore notifications we don't recognize, for compatibility
+ with newer stubs. */
+ ;
+}
+
\f
/* Read or write LEN bytes from inferior memory at MEMADDR,
transferring to or from debugger address BUFFER. Write to inferior
{
int res;
+ set_general_thread (inferior_ptid);
+
if (should_write)
res = remote_write_bytes (mem_addr, buffer, mem_len);
else
switch ((enum serial_rc) ch)
{
case SERIAL_EOF:
- target_mourn_inferior ();
+ pop_target ();
error (_("Remote connection closed"));
/* no return */
case SERIAL_ERROR:
static int
putpkt_binary (char *buf, int cnt)
{
+ struct remote_state *rs = get_remote_state ();
int i;
unsigned char csum = 0;
char *buf2 = alloca (cnt + 6);
int tcount = 0;
char *p;
+ /* Catch cases like trying to read memory or listing threads while
+ we're waiting for a stop reply. The remote server wouldn't be
+ ready to handle this request, so we'd hang and timeout. We don't
+ have to worry about this in synchronous mode, because in that
+ case it's not possible to issue a command while the target is
+ running. This is not a problem in non-stop mode, because in that
+ case, the stub is always ready to process serial input. */
+ if (!non_stop && target_can_async_p () && rs->waiting_for_stop_reply)
+ error (_("Cannot execute this command while the target is running."));
+
+ /* We're sending out a new packet. Make sure we don't look at a
+ stale cached response. */
+ rs->cached_wait_status = 0;
+
/* Copy the packet into buffer BUF2, encapsulating it
and giving it a checksum. */
if (serial_write (remote_desc, buf2, p - buf2))
perror_with_name (_("putpkt: write failed"));
- /* Read until either a timeout occurs (-2) or '+' is read. */
+ /* If this is a no acks version of the remote protocol, send the
+ packet and move on. */
+ if (rs->noack_mode)
+ break;
+
+ /* Read until either a timeout occurs (-2) or '+' is read.
+ Handle any notification that arrives in the mean time. */
while (1)
{
ch = readchar (remote_timeout);
case '-':
case SERIAL_TIMEOUT:
case '$':
+ case '%':
if (started_error_output)
{
putchar_unfiltered ('\n');
serial_write (remote_desc, "+", 1);
continue; /* Now, go look for +. */
}
+
+ case '%':
+ {
+ int val;
+
+ /* If we got a notification, handle it, and go back to looking
+ for an ack. */
+ /* We've found the start of a notification. Now
+ collect the data. */
+ val = read_frame (&rs->buf, &rs->buf_size);
+ if (val >= 0)
+ {
+ if (remote_debug)
+ {
+ fprintf_unfiltered (gdb_stdlog, " Notification received: ");
+ fputstrn_unfiltered (rs->buf, val, 0, gdb_stdlog);
+ fprintf_unfiltered (gdb_stdlog, "\n");
+ }
+ handle_notification (rs->buf, val);
+ /* We're in sync now, rewait for the ack. */
+ tcount = 0;
+ }
+ else
+ {
+ if (remote_debug)
+ {
+ if (!started_error_output)
+ {
+ started_error_output = 1;
+ fprintf_unfiltered (gdb_stdlog, "putpkt: Junk: ");
+ }
+ fputc_unfiltered (ch & 0177, gdb_stdlog);
+ fprintf_unfiltered (gdb_stdlog, "%s", rs->buf);
+ }
+ }
+ continue;
+ }
+ /* fall-through */
default:
if (remote_debug)
{
}
#endif
}
+ return 0;
}
/* Come here after finding the start of a frame when we expected an
long bc;
int c;
char *buf = *buf_p;
+ struct remote_state *rs = get_remote_state ();
csum = 0;
bc = 0;
return -1;
}
+ /* Don't recompute the checksum; with no ack packets we
+ don't have any way to indicate a packet retransmission
+ is necessary. */
+ if (rs->noack_mode)
+ return bc;
+
pktcsum = (fromhex (check_0) << 4) | fromhex (check_1);
if (csum == pktcsum)
return bc;
rather than timing out; this is used (in synchronous mode) to wait
for a target that is is executing user code to stop. If FOREVER ==
0, this function is allowed to time out gracefully and return an
- indication of this to the caller. Otherwise return the number
- of bytes read. */
+ indication of this to the caller. Otherwise return the number of
+ bytes read. If EXPECTING_NOTIF, consider receiving a notification
+ enough reason to return to the caller. */
+
static int
-getpkt_sane (char **buf, long *sizeof_buf, int forever)
+getpkt_or_notif_sane_1 (char **buf, long *sizeof_buf, int forever,
+ int expecting_notif)
{
+ struct remote_state *rs = get_remote_state ();
int c;
int tries;
int timeout;
int val;
+ /* We're reading a new response. Make sure we don't look at a
+ previously cached response. */
+ rs->cached_wait_status = 0;
+
strcpy (*buf, "timeout");
if (forever)
- {
- timeout = watchdog > 0 ? watchdog : -1;
- }
-
+ timeout = watchdog > 0 ? watchdog : -1;
+ else if (expecting_notif)
+ timeout = 0; /* There should already be a char in the buffer. If
+ not, bail out. */
else
timeout = remote_timeout;
#define MAX_TRIES 3
- for (tries = 1; tries <= MAX_TRIES; tries++)
+ /* Process any number of notifications, and then return when
+ we get a packet. */
+ for (;;)
{
- /* This can loop forever if the remote side sends us characters
- continuously, but if it pauses, we'll get a zero from
- readchar because of timeout. Then we'll count that as a
- retry. */
-
- /* Note that we will only wait forever prior to the start of a
- packet. After that, we expect characters to arrive at a
- brisk pace. They should show up within remote_timeout
- intervals. */
-
- do
+ /* If we get a timeout or bad checksm, retry up to MAX_TRIES
+ times. */
+ for (tries = 1; tries <= MAX_TRIES; tries++)
{
- c = readchar (timeout);
+ /* This can loop forever if the remote side sends us
+ characters continuously, but if it pauses, we'll get
+ SERIAL_TIMEOUT from readchar because of timeout. Then
+ we'll count that as a retry.
+
+ Note that even when forever is set, we will only wait
+ forever prior to the start of a packet. After that, we
+ expect characters to arrive at a brisk pace. They should
+ show up within remote_timeout intervals. */
+ do
+ c = readchar (timeout);
+ while (c != SERIAL_TIMEOUT && c != '$' && c != '%');
if (c == SERIAL_TIMEOUT)
{
+ if (expecting_notif)
+ return -1; /* Don't complain, it's normal to not get
+ anything in this case. */
+
if (forever) /* Watchdog went off? Kill the target. */
{
QUIT;
- target_mourn_inferior ();
- error (_("Watchdog has expired. Target detached."));
+ pop_target ();
+ error (_("Watchdog timeout has expired. Target detached."));
}
if (remote_debug)
fputs_filtered ("Timed out.\n", gdb_stdlog);
- goto retry;
}
+ else
+ {
+ /* We've found the start of a packet or notification.
+ Now collect the data. */
+ val = read_frame (buf, sizeof_buf);
+ if (val >= 0)
+ break;
+ }
+
+ serial_write (remote_desc, "-", 1);
}
- while (c != '$');
- /* We've found the start of a packet, now collect the data. */
+ if (tries > MAX_TRIES)
+ {
+ /* We have tried hard enough, and just can't receive the
+ packet/notification. Give up. */
+ printf_unfiltered (_("Ignoring packet error, continuing...\n"));
- val = read_frame (buf, sizeof_buf);
+ /* Skip the ack char if we're in no-ack mode. */
+ if (!rs->noack_mode)
+ serial_write (remote_desc, "+", 1);
+ return -1;
+ }
- if (val >= 0)
+ /* If we got an ordinary packet, return that to our caller. */
+ if (c == '$')
{
if (remote_debug)
{
fputstrn_unfiltered (*buf, val, 0, gdb_stdlog);
fprintf_unfiltered (gdb_stdlog, "\n");
}
- serial_write (remote_desc, "+", 1);
+
+ /* Skip the ack char if we're in no-ack mode. */
+ if (!rs->noack_mode)
+ serial_write (remote_desc, "+", 1);
return val;
}
- /* Try the whole thing again. */
- retry:
- serial_write (remote_desc, "-", 1);
+ /* If we got a notification, handle it, and go back to looking
+ for a packet. */
+ else
+ {
+ gdb_assert (c == '%');
+
+ if (remote_debug)
+ {
+ fprintf_unfiltered (gdb_stdlog, " Notification received: ");
+ fputstrn_unfiltered (*buf, val, 0, gdb_stdlog);
+ fprintf_unfiltered (gdb_stdlog, "\n");
+ }
+
+ handle_notification (*buf, val);
+
+ /* Notifications require no acknowledgement. */
+
+ if (expecting_notif)
+ return -1;
+ }
}
+}
- /* We have tried hard enough, and just can't receive the packet.
- Give up. */
+static int
+getpkt_sane (char **buf, long *sizeof_buf, int forever)
+{
+ return getpkt_or_notif_sane_1 (buf, sizeof_buf, forever, 0);
+}
- printf_unfiltered (_("Ignoring packet error, continuing...\n"));
- serial_write (remote_desc, "+", 1);
- return -1;
+static int
+getpkt_or_notif_sane (char **buf, long *sizeof_buf, int forever)
+{
+ return getpkt_or_notif_sane_1 (buf, sizeof_buf, forever, 1);
}
+
\f
static void
remote_kill (void)
{
- /* For some mysterious reason, wait_for_inferior calls kill instead of
- mourn after it gets TARGET_WAITKIND_SIGNALLED. Work around it. */
- if (kill_kludge)
- {
- kill_kludge = 0;
- target_mourn_inferior ();
- return;
- }
-
- /* Use catch_errors so the user can quit from gdb even when we aren't on
- speaking terms with the remote system. */
+ /* Use catch_errors so the user can quit from gdb even when we
+ aren't on speaking terms with the remote system. */
catch_errors ((catch_errors_ftype *) putpkt, "k", "", RETURN_MASK_ERROR);
/* Don't wait for it to die. I'm not really sure it matters whether
target_mourn_inferior ();
}
-/* Async version of remote_kill. */
+static int
+remote_vkill (int pid, struct remote_state *rs)
+{
+ if (remote_protocol_packets[PACKET_vKill].support == PACKET_DISABLE)
+ return -1;
+
+ /* Tell the remote target to detach. */
+ sprintf (rs->buf, "vKill;%x", pid);
+ putpkt (rs->buf);
+ getpkt (&rs->buf, &rs->buf_size, 0);
+
+ if (packet_ok (rs->buf,
+ &remote_protocol_packets[PACKET_vKill]) == PACKET_OK)
+ return 0;
+ else if (remote_protocol_packets[PACKET_vKill].support == PACKET_DISABLE)
+ return -1;
+ else
+ return 1;
+}
+
static void
-remote_async_kill (void)
+extended_remote_kill (void)
{
- /* Unregister the file descriptor from the event loop. */
- if (target_is_async_p ())
- serial_async (remote_desc, NULL, 0);
+ int res;
+ int pid = ptid_get_pid (inferior_ptid);
+ struct remote_state *rs = get_remote_state ();
- /* For some mysterious reason, wait_for_inferior calls kill instead of
- mourn after it gets TARGET_WAITKIND_SIGNALLED. Work around it. */
- if (kill_kludge)
+ res = remote_vkill (pid, rs);
+ if (res == -1 && !remote_multi_process_p (rs))
{
- kill_kludge = 0;
- target_mourn_inferior ();
- return;
+ /* Don't try 'k' on a multi-process aware stub -- it has no way
+ to specify the pid. */
+
+ putpkt ("k");
+#if 0
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ if (rs->buf[0] != 'O' || rs->buf[0] != 'K')
+ res = 1;
+#else
+ /* Don't wait for it to die. I'm not really sure it matters whether
+ we do or not. For the existing stubs, kill is a noop. */
+ res = 0;
+#endif
}
- /* Use catch_errors so the user can quit from gdb even when we
- aren't on speaking terms with the remote system. */
- catch_errors ((catch_errors_ftype *) putpkt, "k", "", RETURN_MASK_ERROR);
+ if (res != 0)
+ error (_("Can't kill process"));
- /* Don't wait for it to die. I'm not really sure it matters whether
- we do or not. For the existing stubs, kill is a noop. */
+ delete_inferior (pid);
target_mourn_inferior ();
}
static void
-remote_mourn (void)
+remote_mourn (struct target_ops *ops)
{
- remote_mourn_1 (&remote_ops);
+ remote_mourn_1 (ops);
}
+/* Worker function for remote_mourn. */
static void
-remote_async_mourn (void)
+remote_mourn_1 (struct target_ops *target)
+{
+ unpush_target (target);
+
+ /* remote_close takes care of cleaning up. */
+}
+
+static int
+select_new_thread_callback (struct thread_info *th, void* data)
{
- remote_mourn_1 (&remote_async_ops);
+ if (!is_exited (th->ptid))
+ {
+ switch_to_thread (th->ptid);
+ printf_filtered (_("[Switching to %s]\n"),
+ target_pid_to_str (inferior_ptid));
+ return 1;
+ }
+ return 0;
}
static void
-extended_remote_mourn (void)
+extended_remote_mourn_1 (struct target_ops *target)
{
- /* We do _not_ want to mourn the target like this; this will
- remove the extended remote target from the target stack,
- and the next time the user says "run" it'll fail.
+ struct remote_state *rs = get_remote_state ();
- FIXME: What is the right thing to do here? */
-#if 0
- remote_mourn_1 (&extended_remote_ops);
-#endif
+ /* In case we got here due to an error, but we're going to stay
+ connected. */
+ rs->waiting_for_stop_reply = 0;
+
+ /* We're no longer interested in these events. */
+ discard_pending_stop_replies (ptid_get_pid (inferior_ptid));
+
+ /* Unlike "target remote", we do not want to unpush the target; then
+ the next time the user says "run", we won't be connected. */
+
+ if (have_inferiors ())
+ {
+ extern void nullify_last_target_wait_ptid ();
+ /* Multi-process case. The current process has exited, but
+ there are other processes to debug. Switch to the first
+ available. */
+ iterate_over_threads (select_new_thread_callback, NULL);
+ nullify_last_target_wait_ptid ();
+ }
+ else
+ {
+ struct remote_state *rs = get_remote_state ();
+
+ /* Call common code to mark the inferior as not running. */
+ generic_mourn_inferior ();
+ if (!remote_multi_process_p (rs))
+ {
+ /* Check whether the target is running now - some remote stubs
+ automatically restart after kill. */
+ putpkt ("?");
+ getpkt (&rs->buf, &rs->buf_size, 0);
+
+ if (rs->buf[0] == 'S' || rs->buf[0] == 'T')
+ {
+ /* Assume that the target has been restarted. Set inferior_ptid
+ so that bits of core GDB realizes there's something here, e.g.,
+ so that the user can say "kill" again. */
+ inferior_ptid = magic_null_ptid;
+ }
+ else
+ {
+ /* Mark this (still pushed) target as not executable until we
+ restart it. */
+ target_mark_exited (target);
+ }
+ }
+ else
+ /* Always remove execution if this was the last process. */
+ target_mark_exited (target);
+ }
}
-/* Worker function for remote_mourn. */
static void
-remote_mourn_1 (struct target_ops *target)
+extended_remote_mourn (struct target_ops *ops)
{
- unpush_target (target);
- generic_mourn_inferior ();
+ extended_remote_mourn_1 (ops);
}
-/* In the extended protocol we want to be able to do things like
- "run" and have them basically work as expected. So we need
- a special create_inferior function.
+static int
+extended_remote_run (char *args)
+{
+ struct remote_state *rs = get_remote_state ();
+ char *p;
+ int len;
- FIXME: One day add support for changing the exec file
- we're debugging, arguments and an environment. */
+ /* If the user has disabled vRun support, or we have detected that
+ support is not available, do not try it. */
+ if (remote_protocol_packets[PACKET_vRun].support == PACKET_DISABLE)
+ return -1;
-static void
-extended_remote_create_inferior (char *exec_file, char *args,
- char **env, int from_tty)
-{
- /* Rip out the breakpoints; we'll reinsert them after restarting
- the remote server. */
- remove_breakpoints ();
+ strcpy (rs->buf, "vRun;");
+ len = strlen (rs->buf);
- /* Now restart the remote server. */
- extended_remote_restart ();
+ if (strlen (remote_exec_file) * 2 + len >= get_remote_packet_size ())
+ error (_("Remote file name too long for run packet"));
+ len += 2 * bin2hex ((gdb_byte *) remote_exec_file, rs->buf + len, 0);
+
+ gdb_assert (args != NULL);
+ if (*args)
+ {
+ struct cleanup *back_to;
+ int i;
+ char **argv;
+
+ argv = gdb_buildargv (args);
+ back_to = make_cleanup ((void (*) (void *)) freeargv, argv);
+ for (i = 0; argv[i] != NULL; i++)
+ {
+ if (strlen (argv[i]) * 2 + 1 + len >= get_remote_packet_size ())
+ error (_("Argument list too long for run packet"));
+ rs->buf[len++] = ';';
+ len += 2 * bin2hex ((gdb_byte *) argv[i], rs->buf + len, 0);
+ }
+ do_cleanups (back_to);
+ }
- /* Now put the breakpoints back in. This way we're safe if the
- restart function works via a unix fork on the remote side. */
- insert_breakpoints ();
+ rs->buf[len++] = '\0';
+
+ putpkt (rs->buf);
+ getpkt (&rs->buf, &rs->buf_size, 0);
- /* Clean up from the last time we were running. */
- clear_proceed_status ();
+ if (packet_ok (rs->buf, &remote_protocol_packets[PACKET_vRun]) == PACKET_OK)
+ {
+ /* We have a wait response; we don't need it, though. All is well. */
+ return 0;
+ }
+ else if (remote_protocol_packets[PACKET_vRun].support == PACKET_DISABLE)
+ /* It wasn't disabled before, but it is now. */
+ return -1;
+ else
+ {
+ if (remote_exec_file[0] == '\0')
+ error (_("Running the default executable on the remote target failed; "
+ "try \"set remote exec-file\"?"));
+ else
+ error (_("Running \"%s\" on the remote target failed"),
+ remote_exec_file);
+ }
}
-/* Async version of extended_remote_create_inferior. */
+/* In the extended protocol we want to be able to do things like
+ "run" and have them basically work as expected. So we need
+ a special create_inferior function. We support changing the
+ executable file and the command line arguments, but not the
+ environment. */
+
static void
-extended_remote_async_create_inferior (char *exec_file, char *args,
- char **env, int from_tty)
+extended_remote_create_inferior_1 (char *exec_file, char *args,
+ char **env, int from_tty)
{
- /* Rip out the breakpoints; we'll reinsert them after restarting
- the remote server. */
- remove_breakpoints ();
-
/* If running asynchronously, register the target file descriptor
with the event loop. */
if (target_can_async_p ())
target_async (inferior_event_handler, 0);
/* Now restart the remote server. */
- extended_remote_restart ();
-
- /* Now put the breakpoints back in. This way we're safe if the
- restart function works via a unix fork on the remote side. */
- insert_breakpoints ();
+ if (extended_remote_run (args) == -1)
+ {
+ /* vRun was not supported. Fail if we need it to do what the
+ user requested. */
+ if (remote_exec_file[0])
+ error (_("Remote target does not support \"set remote exec-file\""));
+ if (args[0])
+ error (_("Remote target does not support \"set args\" or run <ARGS>"));
- /* Clean up from the last time we were running. */
- clear_proceed_status ();
-}
-\f
+ /* Fall back to "R". */
+ extended_remote_restart ();
+ }
-/* On some machines, e.g. 68k, we may use a different breakpoint
- instruction than other targets; in those use
- DEPRECATED_REMOTE_BREAKPOINT instead of just BREAKPOINT_FROM_PC.
- Also, bi-endian targets may define
- DEPRECATED_LITTLE_REMOTE_BREAKPOINT and
- DEPRECATED_BIG_REMOTE_BREAKPOINT. If none of these are defined, we
- just call the standard routines that are in mem-break.c. */
+ /* Clean up from the last time we ran, before we mark the target
+ running again. This will mark breakpoints uninserted, and
+ get_offsets may insert breakpoints. */
+ init_thread_list ();
+ init_wait_for_inferior ();
-/* NOTE: cagney/2003-06-08: This is silly. A remote and simulator
- target should use an identical BREAKPOINT_FROM_PC. As for native,
- the ARCH-OS-tdep.c code can override the default. */
+ /* Now mark the inferior as running before we do anything else. */
+ inferior_ptid = magic_null_ptid;
-#if defined (DEPRECATED_LITTLE_REMOTE_BREAKPOINT) && defined (DEPRECATED_BIG_REMOTE_BREAKPOINT) && !defined(DEPRECATED_REMOTE_BREAKPOINT)
-#define DEPRECATED_REMOTE_BREAKPOINT
-#endif
+ /* Now, if we have thread information, update inferior_ptid. */
+ inferior_ptid = remote_current_thread (inferior_ptid);
-#ifdef DEPRECATED_REMOTE_BREAKPOINT
+ add_inferior (ptid_get_pid (inferior_ptid));
+ add_thread_silent (inferior_ptid);
-/* If the target isn't bi-endian, just pretend it is. */
-#if !defined (DEPRECATED_LITTLE_REMOTE_BREAKPOINT) && !defined (DEPRECATED_BIG_REMOTE_BREAKPOINT)
-#define DEPRECATED_LITTLE_REMOTE_BREAKPOINT DEPRECATED_REMOTE_BREAKPOINT
-#define DEPRECATED_BIG_REMOTE_BREAKPOINT DEPRECATED_REMOTE_BREAKPOINT
-#endif
+ target_mark_running (&extended_remote_ops);
-static unsigned char big_break_insn[] = DEPRECATED_BIG_REMOTE_BREAKPOINT;
-static unsigned char little_break_insn[] = DEPRECATED_LITTLE_REMOTE_BREAKPOINT;
+ /* Get updated offsets, if the stub uses qOffsets. */
+ get_offsets ();
+}
-#endif /* DEPRECATED_REMOTE_BREAKPOINT */
+static void
+extended_remote_create_inferior (struct target_ops *ops,
+ char *exec_file, char *args,
+ char **env, int from_tty)
+{
+ extended_remote_create_inferior_1 (exec_file, args, env, from_tty);
+}
+\f
/* Insert a breakpoint. On targets that have software breakpoint
support, we ask the remote target to do the work; on targets
static int
remote_insert_breakpoint (struct bp_target_info *bp_tgt)
{
- CORE_ADDR addr = bp_tgt->placed_address;
- struct remote_state *rs = get_remote_state ();
-#ifdef DEPRECATED_REMOTE_BREAKPOINT
- int val;
-#endif
-
/* Try the "Z" s/w breakpoint packet if it is not already disabled.
If it succeeds, then set the support to PACKET_ENABLE. If it
fails, and the user has explicitly requested the Z support then
if (remote_protocol_packets[PACKET_Z0].support != PACKET_DISABLE)
{
- char *p = rs->buf;
+ CORE_ADDR addr = bp_tgt->placed_address;
+ struct remote_state *rs;
+ char *p;
+ int bpsize;
+
+ gdbarch_breakpoint_from_pc (target_gdbarch, &addr, &bpsize);
+
+ rs = get_remote_state ();
+ p = rs->buf;
*(p++) = 'Z';
*(p++) = '0';
*(p++) = ',';
- BREAKPOINT_FROM_PC (&bp_tgt->placed_address, &bp_tgt->placed_size);
- addr = (ULONGEST) remote_address_masked (bp_tgt->placed_address);
+ addr = (ULONGEST) remote_address_masked (addr);
p += hexnumstr (p, addr);
- sprintf (p, ",%d", bp_tgt->placed_size);
+ sprintf (p, ",%d", bpsize);
putpkt (rs->buf);
getpkt (&rs->buf, &rs->buf_size, 0);
case PACKET_ERROR:
return -1;
case PACKET_OK:
+ bp_tgt->placed_address = addr;
+ bp_tgt->placed_size = bpsize;
return 0;
case PACKET_UNKNOWN:
break;
}
}
-#ifdef DEPRECATED_REMOTE_BREAKPOINT
- bp_tgt->placed_size = bp_tgt->shadow_len = sizeof big_break_insn;
- val = target_read_memory (addr, bp_tgt->shadow_contents, bp_tgt->shadow_len);
-
- if (val == 0)
- {
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
- val = target_write_memory (addr, (char *) big_break_insn,
- sizeof big_break_insn);
- else
- val = target_write_memory (addr, (char *) little_break_insn,
- sizeof little_break_insn);
- }
-
- return val;
-#else
return memory_insert_breakpoint (bp_tgt);
-#endif /* DEPRECATED_REMOTE_BREAKPOINT */
}
static int
return (rs->buf[0] == 'E');
}
-#ifdef DEPRECATED_REMOTE_BREAKPOINT
- return target_write_memory (bp_tgt->placed_address, bp_tgt->shadow_contents,
- bp_tgt->shadow_len);
-#else
return memory_remove_breakpoint (bp_tgt);
-#endif /* DEPRECATED_REMOTE_BREAKPOINT */
}
static int
static int
remote_stopped_by_watchpoint (void)
{
- return remote_stopped_by_watchpoint_p;
+ return remote_stopped_by_watchpoint_p;
}
-extern int stepped_after_stopped_by_watchpoint;
-
static int
remote_stopped_data_address (struct target_ops *target, CORE_ADDR *addr_p)
{
int rc = 0;
- if (remote_stopped_by_watchpoint ()
- || stepped_after_stopped_by_watchpoint)
+ if (remote_stopped_by_watchpoint ())
{
*addr_p = remote_watch_data_address;
rc = 1;
remote_insert_hw_breakpoint (struct bp_target_info *bp_tgt)
{
CORE_ADDR addr;
- struct remote_state *rs = get_remote_state ();
- char *p = rs->buf;
+ struct remote_state *rs;
+ char *p;
/* The length field should be set to the size of a breakpoint
instruction, even though we aren't inserting one ourselves. */
- BREAKPOINT_FROM_PC (&bp_tgt->placed_address, &bp_tgt->placed_size);
+ gdbarch_breakpoint_from_pc
+ (target_gdbarch, &bp_tgt->placed_address, &bp_tgt->placed_size);
if (remote_protocol_packets[PACKET_Z1].support == PACKET_DISABLE)
return -1;
+ rs = get_remote_state ();
+ p = rs->buf;
+
*(p++) = 'Z';
*(p++) = '1';
*(p++) = ',';
_("remote_remove_hw_breakpoint: reached end of function"));
}
-/* Some targets are only capable of doing downloads, and afterwards
- they switch to the remote serial protocol. This function provides
- a clean way to get from the download target to the remote target.
- It's basically just a wrapper so that we don't have to expose any
- of the internal workings of remote.c.
-
- Prior to calling this routine, you should shutdown the current
- target code, else you will get the "A program is being debugged
- already..." message. Usually a call to pop_target() suffices. */
-
-void
-push_remote_target (char *name, int from_tty)
-{
- printf_filtered (_("Switching to remote protocol\n"));
- remote_open (name, from_tty);
-}
-
/* Table used by the crc32 function to calcuate the checksum. */
static unsigned long crc32_table[256] =
printf_filtered (_("No loaded section named '%s'.\n"), args);
}
+/* Write LEN bytes from WRITEBUF into OBJECT_NAME/ANNEX at OFFSET
+ into remote target. The number of bytes written to the remote
+ target is returned, or -1 for error. */
+
+static LONGEST
+remote_write_qxfer (struct target_ops *ops, const char *object_name,
+ const char *annex, const gdb_byte *writebuf,
+ ULONGEST offset, LONGEST len,
+ struct packet_config *packet)
+{
+ int i, buf_len;
+ ULONGEST n;
+ gdb_byte *wbuf;
+ struct remote_state *rs = get_remote_state ();
+ int max_size = get_memory_write_packet_size ();
+
+ if (packet->support == PACKET_DISABLE)
+ return -1;
+
+ /* Insert header. */
+ i = snprintf (rs->buf, max_size,
+ "qXfer:%s:write:%s:%s:",
+ object_name, annex ? annex : "",
+ phex_nz (offset, sizeof offset));
+ max_size -= (i + 1);
+
+ /* Escape as much data as fits into rs->buf. */
+ buf_len = remote_escape_output
+ (writebuf, len, (rs->buf + i), &max_size, max_size);
+
+ if (putpkt_binary (rs->buf, i + buf_len) < 0
+ || getpkt_sane (&rs->buf, &rs->buf_size, 0) < 0
+ || packet_ok (rs->buf, packet) != PACKET_OK)
+ return -1;
+
+ unpack_varlen_hex (rs->buf, &n);
+ return n;
+}
+
/* Read OBJECT_NAME/ANNEX from the remote target using a qXfer packet.
Data at OFFSET, of up to LEN bytes, is read into READBUF; the
number of bytes read is returned, or 0 for EOF, or -1 for error.
i = remote_unescape_input (rs->buf + 1, packet_len - 1, readbuf, n);
/* 'l' is an EOF marker, possibly including a final block of data,
- or possibly empty. Record it to bypass the next read, if one is
- issued. */
- if (rs->buf[0] == 'l')
+ or possibly empty. If we have the final block of a non-empty
+ object, record this fact to bypass a subsequent partial read. */
+ if (rs->buf[0] == 'l' && offset + i > 0)
{
finished_object = xstrdup (object_name);
finished_annex = xstrdup (annex ? annex : "");
const char *annex, gdb_byte *readbuf,
const gdb_byte *writebuf, ULONGEST offset, LONGEST len)
{
- struct remote_state *rs = get_remote_state ();
+ struct remote_state *rs;
int i;
char *p2;
char query_type;
+ set_general_thread (inferior_ptid);
+
+ rs = get_remote_state ();
+
/* Handle memory using the standard memory routines. */
if (object == TARGET_OBJECT_MEMORY)
{
int xfered;
errno = 0;
+ /* If the remote target is connected but not running, we should
+ pass this request down to a lower stratum (e.g. the executable
+ file). */
+ if (!target_has_execution)
+ return 0;
+
if (writebuf != NULL)
xfered = remote_write_bytes (offset, writebuf, len);
else
return -1;
}
+ /* Handle SPU memory using qxfer packets. */
+ if (object == TARGET_OBJECT_SPU)
+ {
+ if (readbuf)
+ return remote_read_qxfer (ops, "spu", annex, readbuf, offset, len,
+ &remote_protocol_packets
+ [PACKET_qXfer_spu_read]);
+ else
+ return remote_write_qxfer (ops, "spu", annex, writebuf, offset, len,
+ &remote_protocol_packets
+ [PACKET_qXfer_spu_write]);
+ }
+
/* Only handle flash writes. */
if (writebuf != NULL)
{
return remote_read_qxfer (ops, "auxv", annex, readbuf, offset, len,
&remote_protocol_packets[PACKET_qXfer_auxv]);
+ case TARGET_OBJECT_AVAILABLE_FEATURES:
+ return remote_read_qxfer
+ (ops, "features", annex, readbuf, offset, len,
+ &remote_protocol_packets[PACKET_qXfer_features]);
+
+ case TARGET_OBJECT_LIBRARIES:
+ return remote_read_qxfer
+ (ops, "libraries", annex, readbuf, offset, len,
+ &remote_protocol_packets[PACKET_qXfer_libraries]);
+
case TARGET_OBJECT_MEMORY_MAP:
gdb_assert (annex == NULL);
return remote_read_qxfer (ops, "memory-map", annex, readbuf, offset, len,
return strlen ((char *) readbuf);
}
+static int
+remote_search_memory (struct target_ops* ops,
+ CORE_ADDR start_addr, ULONGEST search_space_len,
+ const gdb_byte *pattern, ULONGEST pattern_len,
+ CORE_ADDR *found_addrp)
+{
+ struct remote_state *rs = get_remote_state ();
+ int max_size = get_memory_write_packet_size ();
+ struct packet_config *packet =
+ &remote_protocol_packets[PACKET_qSearch_memory];
+ /* number of packet bytes used to encode the pattern,
+ this could be more than PATTERN_LEN due to escape characters */
+ int escaped_pattern_len;
+ /* amount of pattern that was encodable in the packet */
+ int used_pattern_len;
+ int i;
+ int found;
+ ULONGEST found_addr;
+
+ /* Don't go to the target if we don't have to.
+ This is done before checking packet->support to avoid the possibility that
+ a success for this edge case means the facility works in general. */
+ if (pattern_len > search_space_len)
+ return 0;
+ if (pattern_len == 0)
+ {
+ *found_addrp = start_addr;
+ return 1;
+ }
+
+ /* If we already know the packet isn't supported, fall back to the simple
+ way of searching memory. */
+
+ if (packet->support == PACKET_DISABLE)
+ {
+ /* Target doesn't provided special support, fall back and use the
+ standard support (copy memory and do the search here). */
+ return simple_search_memory (ops, start_addr, search_space_len,
+ pattern, pattern_len, found_addrp);
+ }
+
+ /* Insert header. */
+ i = snprintf (rs->buf, max_size,
+ "qSearch:memory:%s;%s;",
+ paddr_nz (start_addr),
+ phex_nz (search_space_len, sizeof (search_space_len)));
+ max_size -= (i + 1);
+
+ /* Escape as much data as fits into rs->buf. */
+ escaped_pattern_len =
+ remote_escape_output (pattern, pattern_len, (rs->buf + i),
+ &used_pattern_len, max_size);
+
+ /* Bail if the pattern is too large. */
+ if (used_pattern_len != pattern_len)
+ error ("Pattern is too large to transmit to remote target.");
+
+ if (putpkt_binary (rs->buf, i + escaped_pattern_len) < 0
+ || getpkt_sane (&rs->buf, &rs->buf_size, 0) < 0
+ || packet_ok (rs->buf, packet) != PACKET_OK)
+ {
+ /* The request may not have worked because the command is not
+ supported. If so, fall back to the simple way. */
+ if (packet->support == PACKET_DISABLE)
+ {
+ return simple_search_memory (ops, start_addr, search_space_len,
+ pattern, pattern_len, found_addrp);
+ }
+ return -1;
+ }
+
+ if (rs->buf[0] == '0')
+ found = 0;
+ else if (rs->buf[0] == '1')
+ {
+ found = 1;
+ if (rs->buf[1] != ',')
+ error (_("Unknown qSearch:memory reply: %s"), rs->buf);
+ unpack_varlen_hex (rs->buf + 2, &found_addr);
+ *found_addrp = found_addr;
+ }
+ else
+ error (_("Unknown qSearch:memory reply: %s"), rs->buf);
+
+ return found;
+}
+
static void
remote_rcmd (char *command,
struct ui_file *outbuf)
puts_filtered ("\n");
}
-#if 0
-/* --------- UNIT_TEST for THREAD oriented PACKETS ------------------- */
+#if 0
+/* --------- UNIT_TEST for THREAD oriented PACKETS ------------------- */
+
+static void display_thread_info (struct gdb_ext_thread_info *info);
+
+static void threadset_test_cmd (char *cmd, int tty);
+
+static void threadalive_test (char *cmd, int tty);
+
+static void threadlist_test_cmd (char *cmd, int tty);
+
+int get_and_display_threadinfo (threadref *ref);
+
+static void threadinfo_test_cmd (char *cmd, int tty);
+
+static int thread_display_step (threadref *ref, void *context);
+
+static void threadlist_update_test_cmd (char *cmd, int tty);
+
+static void init_remote_threadtests (void);
+
+#define SAMPLE_THREAD 0x05060708 /* Truncated 64 bit threadid. */
+
+static void
+threadset_test_cmd (char *cmd, int tty)
+{
+ int sample_thread = SAMPLE_THREAD;
+
+ printf_filtered (_("Remote threadset test\n"));
+ set_general_thread (sample_thread);
+}
+
+
+static void
+threadalive_test (char *cmd, int tty)
+{
+ int sample_thread = SAMPLE_THREAD;
+ int pid = ptid_get_pid (inferior_ptid);
+ ptid_t ptid = ptid_build (pid, 0, sample_thread);
+
+ if (remote_thread_alive (ptid))
+ printf_filtered ("PASS: Thread alive test\n");
+ else
+ printf_filtered ("FAIL: Thread alive test\n");
+}
+
+void output_threadid (char *title, threadref *ref);
+
+void
+output_threadid (char *title, threadref *ref)
+{
+ char hexid[20];
+
+ pack_threadid (&hexid[0], ref); /* Convert threead id into hex. */
+ hexid[16] = 0;
+ printf_filtered ("%s %s\n", title, (&hexid[0]));
+}
+
+static void
+threadlist_test_cmd (char *cmd, int tty)
+{
+ int startflag = 1;
+ threadref nextthread;
+ int done, result_count;
+ threadref threadlist[3];
+
+ printf_filtered ("Remote Threadlist test\n");
+ if (!remote_get_threadlist (startflag, &nextthread, 3, &done,
+ &result_count, &threadlist[0]))
+ printf_filtered ("FAIL: threadlist test\n");
+ else
+ {
+ threadref *scan = threadlist;
+ threadref *limit = scan + result_count;
+
+ while (scan < limit)
+ output_threadid (" thread ", scan++);
+ }
+}
+
+void
+display_thread_info (struct gdb_ext_thread_info *info)
+{
+ output_threadid ("Threadid: ", &info->threadid);
+ printf_filtered ("Name: %s\n ", info->shortname);
+ printf_filtered ("State: %s\n", info->display);
+ printf_filtered ("other: %s\n\n", info->more_display);
+}
+
+int
+get_and_display_threadinfo (threadref *ref)
+{
+ int result;
+ int set;
+ struct gdb_ext_thread_info threadinfo;
+
+ set = TAG_THREADID | TAG_EXISTS | TAG_THREADNAME
+ | TAG_MOREDISPLAY | TAG_DISPLAY;
+ if (0 != (result = remote_get_threadinfo (ref, set, &threadinfo)))
+ display_thread_info (&threadinfo);
+ return result;
+}
+
+static void
+threadinfo_test_cmd (char *cmd, int tty)
+{
+ int athread = SAMPLE_THREAD;
+ threadref thread;
+ int set;
+
+ int_to_threadref (&thread, athread);
+ printf_filtered ("Remote Threadinfo test\n");
+ if (!get_and_display_threadinfo (&thread))
+ printf_filtered ("FAIL cannot get thread info\n");
+}
+
+static int
+thread_display_step (threadref *ref, void *context)
+{
+ /* output_threadid(" threadstep ",ref); *//* simple test */
+ return get_and_display_threadinfo (ref);
+}
+
+static void
+threadlist_update_test_cmd (char *cmd, int tty)
+{
+ printf_filtered ("Remote Threadlist update test\n");
+ remote_threadlist_iterator (thread_display_step, 0, CRAZY_MAX_THREADS);
+}
+
+static void
+init_remote_threadtests (void)
+{
+ add_com ("tlist", class_obscure, threadlist_test_cmd, _("\
+Fetch and print the remote list of thread identifiers, one pkt only"));
+ add_com ("tinfo", class_obscure, threadinfo_test_cmd,
+ _("Fetch and display info about one thread"));
+ add_com ("tset", class_obscure, threadset_test_cmd,
+ _("Test setting to a different thread"));
+ add_com ("tupd", class_obscure, threadlist_update_test_cmd,
+ _("Iterate through updating all remote thread info"));
+ add_com ("talive", class_obscure, threadalive_test,
+ _(" Remote thread alive test "));
+}
+
+#endif /* 0 */
+
+/* Convert a thread ID to a string. Returns the string in a static
+ buffer. */
+
+static char *
+remote_pid_to_str (ptid_t ptid)
+{
+ static char buf[64];
+ struct remote_state *rs = get_remote_state ();
+
+ if (ptid_equal (magic_null_ptid, ptid))
+ {
+ xsnprintf (buf, sizeof buf, "Thread <main>");
+ return buf;
+ }
+ else if (remote_multi_process_p (rs)
+ && ptid_get_tid (ptid) != 0 && ptid_get_pid (ptid) != 0)
+ {
+ xsnprintf (buf, sizeof buf, "Thread %d.%ld",
+ ptid_get_pid (ptid), ptid_get_tid (ptid));
+ return buf;
+ }
+ else if (ptid_get_tid (ptid) != 0)
+ {
+ xsnprintf (buf, sizeof buf, "Thread %ld",
+ ptid_get_tid (ptid));
+ return buf;
+ }
+
+ return normal_pid_to_str (ptid);
+}
+
+/* Get the address of the thread local variable in OBJFILE which is
+ stored at OFFSET within the thread local storage for thread PTID. */
+
+static CORE_ADDR
+remote_get_thread_local_address (ptid_t ptid, CORE_ADDR lm, CORE_ADDR offset)
+{
+ if (remote_protocol_packets[PACKET_qGetTLSAddr].support != PACKET_DISABLE)
+ {
+ struct remote_state *rs = get_remote_state ();
+ char *p = rs->buf;
+ char *endp = rs->buf + get_remote_packet_size ();
+ enum packet_result result;
+
+ strcpy (p, "qGetTLSAddr:");
+ p += strlen (p);
+ p = write_ptid (p, endp, ptid);
+ *p++ = ',';
+ p += hexnumstr (p, offset);
+ *p++ = ',';
+ p += hexnumstr (p, lm);
+ *p++ = '\0';
+
+ putpkt (rs->buf);
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ result = packet_ok (rs->buf, &remote_protocol_packets[PACKET_qGetTLSAddr]);
+ if (result == PACKET_OK)
+ {
+ ULONGEST result;
+
+ unpack_varlen_hex (rs->buf, &result);
+ return result;
+ }
+ else if (result == PACKET_UNKNOWN)
+ throw_error (TLS_GENERIC_ERROR,
+ _("Remote target doesn't support qGetTLSAddr packet"));
+ else
+ throw_error (TLS_GENERIC_ERROR,
+ _("Remote target failed to process qGetTLSAddr request"));
+ }
+ else
+ throw_error (TLS_GENERIC_ERROR,
+ _("TLS not supported or disabled on this target"));
+ /* Not reached. */
+ return 0;
+}
+
+/* Support for inferring a target description based on the current
+ architecture and the size of a 'g' packet. While the 'g' packet
+ can have any size (since optional registers can be left off the
+ end), some sizes are easily recognizable given knowledge of the
+ approximate architecture. */
+
+struct remote_g_packet_guess
+{
+ int bytes;
+ const struct target_desc *tdesc;
+};
+typedef struct remote_g_packet_guess remote_g_packet_guess_s;
+DEF_VEC_O(remote_g_packet_guess_s);
+
+struct remote_g_packet_data
+{
+ VEC(remote_g_packet_guess_s) *guesses;
+};
+
+static struct gdbarch_data *remote_g_packet_data_handle;
+
+static void *
+remote_g_packet_data_init (struct obstack *obstack)
+{
+ return OBSTACK_ZALLOC (obstack, struct remote_g_packet_data);
+}
+
+void
+register_remote_g_packet_guess (struct gdbarch *gdbarch, int bytes,
+ const struct target_desc *tdesc)
+{
+ struct remote_g_packet_data *data
+ = gdbarch_data (gdbarch, remote_g_packet_data_handle);
+ struct remote_g_packet_guess new_guess, *guess;
+ int ix;
+
+ gdb_assert (tdesc != NULL);
+
+ for (ix = 0;
+ VEC_iterate (remote_g_packet_guess_s, data->guesses, ix, guess);
+ ix++)
+ if (guess->bytes == bytes)
+ internal_error (__FILE__, __LINE__,
+ "Duplicate g packet description added for size %d",
+ bytes);
+
+ new_guess.bytes = bytes;
+ new_guess.tdesc = tdesc;
+ VEC_safe_push (remote_g_packet_guess_s, data->guesses, &new_guess);
+}
+
+static const struct target_desc *
+remote_read_description (struct target_ops *target)
+{
+ struct remote_g_packet_data *data
+ = gdbarch_data (target_gdbarch, remote_g_packet_data_handle);
+
+ if (!VEC_empty (remote_g_packet_guess_s, data->guesses))
+ {
+ struct remote_g_packet_guess *guess;
+ int ix;
+ int bytes = send_g_packet ();
+
+ for (ix = 0;
+ VEC_iterate (remote_g_packet_guess_s, data->guesses, ix, guess);
+ ix++)
+ if (guess->bytes == bytes)
+ return guess->tdesc;
+
+ /* We discard the g packet. A minor optimization would be to
+ hold on to it, and fill the register cache once we have selected
+ an architecture, but it's too tricky to do safely. */
+ }
+
+ return NULL;
+}
+
+/* Remote file transfer support. This is host-initiated I/O, not
+ target-initiated; for target-initiated, see remote-fileio.c. */
+
+/* If *LEFT is at least the length of STRING, copy STRING to
+ *BUFFER, update *BUFFER to point to the new end of the buffer, and
+ decrease *LEFT. Otherwise raise an error. */
+
+static void
+remote_buffer_add_string (char **buffer, int *left, char *string)
+{
+ int len = strlen (string);
+
+ if (len > *left)
+ error (_("Packet too long for target."));
+
+ memcpy (*buffer, string, len);
+ *buffer += len;
+ *left -= len;
+
+ /* NUL-terminate the buffer as a convenience, if there is
+ room. */
+ if (*left)
+ **buffer = '\0';
+}
+
+/* If *LEFT is large enough, hex encode LEN bytes from BYTES into
+ *BUFFER, update *BUFFER to point to the new end of the buffer, and
+ decrease *LEFT. Otherwise raise an error. */
+
+static void
+remote_buffer_add_bytes (char **buffer, int *left, const gdb_byte *bytes,
+ int len)
+{
+ if (2 * len > *left)
+ error (_("Packet too long for target."));
+
+ bin2hex (bytes, *buffer, len);
+ *buffer += 2 * len;
+ *left -= 2 * len;
+
+ /* NUL-terminate the buffer as a convenience, if there is
+ room. */
+ if (*left)
+ **buffer = '\0';
+}
+
+/* If *LEFT is large enough, convert VALUE to hex and add it to
+ *BUFFER, update *BUFFER to point to the new end of the buffer, and
+ decrease *LEFT. Otherwise raise an error. */
+
+static void
+remote_buffer_add_int (char **buffer, int *left, ULONGEST value)
+{
+ int len = hexnumlen (value);
+
+ if (len > *left)
+ error (_("Packet too long for target."));
+
+ hexnumstr (*buffer, value);
+ *buffer += len;
+ *left -= len;
+
+ /* NUL-terminate the buffer as a convenience, if there is
+ room. */
+ if (*left)
+ **buffer = '\0';
+}
+
+/* Parse an I/O result packet from BUFFER. Set RETCODE to the return
+ value, *REMOTE_ERRNO to the remote error number or zero if none
+ was included, and *ATTACHMENT to point to the start of the annex
+ if any. The length of the packet isn't needed here; there may
+ be NUL bytes in BUFFER, but they will be after *ATTACHMENT.
+
+ Return 0 if the packet could be parsed, -1 if it could not. If
+ -1 is returned, the other variables may not be initialized. */
+
+static int
+remote_hostio_parse_result (char *buffer, int *retcode,
+ int *remote_errno, char **attachment)
+{
+ char *p, *p2;
+
+ *remote_errno = 0;
+ *attachment = NULL;
+
+ if (buffer[0] != 'F')
+ return -1;
+
+ errno = 0;
+ *retcode = strtol (&buffer[1], &p, 16);
+ if (errno != 0 || p == &buffer[1])
+ return -1;
+
+ /* Check for ",errno". */
+ if (*p == ',')
+ {
+ errno = 0;
+ *remote_errno = strtol (p + 1, &p2, 16);
+ if (errno != 0 || p + 1 == p2)
+ return -1;
+ p = p2;
+ }
+
+ /* Check for ";attachment". If there is no attachment, the
+ packet should end here. */
+ if (*p == ';')
+ {
+ *attachment = p + 1;
+ return 0;
+ }
+ else if (*p == '\0')
+ return 0;
+ else
+ return -1;
+}
+
+/* Send a prepared I/O packet to the target and read its response.
+ The prepared packet is in the global RS->BUF before this function
+ is called, and the answer is there when we return.
+
+ COMMAND_BYTES is the length of the request to send, which may include
+ binary data. WHICH_PACKET is the packet configuration to check
+ before attempting a packet. If an error occurs, *REMOTE_ERRNO
+ is set to the error number and -1 is returned. Otherwise the value
+ returned by the function is returned.
+
+ ATTACHMENT and ATTACHMENT_LEN should be non-NULL if and only if an
+ attachment is expected; an error will be reported if there's a
+ mismatch. If one is found, *ATTACHMENT will be set to point into
+ the packet buffer and *ATTACHMENT_LEN will be set to the
+ attachment's length. */
+
+static int
+remote_hostio_send_command (int command_bytes, int which_packet,
+ int *remote_errno, char **attachment,
+ int *attachment_len)
+{
+ struct remote_state *rs = get_remote_state ();
+ int ret, bytes_read;
+ char *attachment_tmp;
+
+ if (!remote_desc
+ || remote_protocol_packets[which_packet].support == PACKET_DISABLE)
+ {
+ *remote_errno = FILEIO_ENOSYS;
+ return -1;
+ }
+
+ putpkt_binary (rs->buf, command_bytes);
+ bytes_read = getpkt_sane (&rs->buf, &rs->buf_size, 0);
+
+ /* If it timed out, something is wrong. Don't try to parse the
+ buffer. */
+ if (bytes_read < 0)
+ {
+ *remote_errno = FILEIO_EINVAL;
+ return -1;
+ }
+
+ switch (packet_ok (rs->buf, &remote_protocol_packets[which_packet]))
+ {
+ case PACKET_ERROR:
+ *remote_errno = FILEIO_EINVAL;
+ return -1;
+ case PACKET_UNKNOWN:
+ *remote_errno = FILEIO_ENOSYS;
+ return -1;
+ case PACKET_OK:
+ break;
+ }
+
+ if (remote_hostio_parse_result (rs->buf, &ret, remote_errno,
+ &attachment_tmp))
+ {
+ *remote_errno = FILEIO_EINVAL;
+ return -1;
+ }
+
+ /* Make sure we saw an attachment if and only if we expected one. */
+ if ((attachment_tmp == NULL && attachment != NULL)
+ || (attachment_tmp != NULL && attachment == NULL))
+ {
+ *remote_errno = FILEIO_EINVAL;
+ return -1;
+ }
+
+ /* If an attachment was found, it must point into the packet buffer;
+ work out how many bytes there were. */
+ if (attachment_tmp != NULL)
+ {
+ *attachment = attachment_tmp;
+ *attachment_len = bytes_read - (*attachment - rs->buf);
+ }
+
+ return ret;
+}
+
+/* Open FILENAME on the remote target, using FLAGS and MODE. Return a
+ remote file descriptor, or -1 if an error occurs (and set
+ *REMOTE_ERRNO). */
+
+static int
+remote_hostio_open (const char *filename, int flags, int mode,
+ int *remote_errno)
+{
+ struct remote_state *rs = get_remote_state ();
+ char *p = rs->buf;
+ int left = get_remote_packet_size () - 1;
+
+ remote_buffer_add_string (&p, &left, "vFile:open:");
+
+ remote_buffer_add_bytes (&p, &left, (const gdb_byte *) filename,
+ strlen (filename));
+ remote_buffer_add_string (&p, &left, ",");
+
+ remote_buffer_add_int (&p, &left, flags);
+ remote_buffer_add_string (&p, &left, ",");
+
+ remote_buffer_add_int (&p, &left, mode);
+
+ return remote_hostio_send_command (p - rs->buf, PACKET_vFile_open,
+ remote_errno, NULL, NULL);
+}
+
+/* Write up to LEN bytes from WRITE_BUF to FD on the remote target.
+ Return the number of bytes written, or -1 if an error occurs (and
+ set *REMOTE_ERRNO). */
+
+static int
+remote_hostio_pwrite (int fd, const gdb_byte *write_buf, int len,
+ ULONGEST offset, int *remote_errno)
+{
+ struct remote_state *rs = get_remote_state ();
+ char *p = rs->buf;
+ int left = get_remote_packet_size ();
+ int out_len;
+
+ remote_buffer_add_string (&p, &left, "vFile:pwrite:");
+
+ remote_buffer_add_int (&p, &left, fd);
+ remote_buffer_add_string (&p, &left, ",");
+
+ remote_buffer_add_int (&p, &left, offset);
+ remote_buffer_add_string (&p, &left, ",");
+
+ p += remote_escape_output (write_buf, len, p, &out_len,
+ get_remote_packet_size () - (p - rs->buf));
+
+ return remote_hostio_send_command (p - rs->buf, PACKET_vFile_pwrite,
+ remote_errno, NULL, NULL);
+}
+
+/* Read up to LEN bytes FD on the remote target into READ_BUF
+ Return the number of bytes read, or -1 if an error occurs (and
+ set *REMOTE_ERRNO). */
+
+static int
+remote_hostio_pread (int fd, gdb_byte *read_buf, int len,
+ ULONGEST offset, int *remote_errno)
+{
+ struct remote_state *rs = get_remote_state ();
+ char *p = rs->buf;
+ char *attachment;
+ int left = get_remote_packet_size ();
+ int ret, attachment_len;
+ int read_len;
+
+ remote_buffer_add_string (&p, &left, "vFile:pread:");
+
+ remote_buffer_add_int (&p, &left, fd);
+ remote_buffer_add_string (&p, &left, ",");
+
+ remote_buffer_add_int (&p, &left, len);
+ remote_buffer_add_string (&p, &left, ",");
+
+ remote_buffer_add_int (&p, &left, offset);
+
+ ret = remote_hostio_send_command (p - rs->buf, PACKET_vFile_pread,
+ remote_errno, &attachment,
+ &attachment_len);
+
+ if (ret < 0)
+ return ret;
+
+ read_len = remote_unescape_input (attachment, attachment_len,
+ read_buf, len);
+ if (read_len != ret)
+ error (_("Read returned %d, but %d bytes."), ret, (int) read_len);
+
+ return ret;
+}
+
+/* Close FD on the remote target. Return 0, or -1 if an error occurs
+ (and set *REMOTE_ERRNO). */
+
+static int
+remote_hostio_close (int fd, int *remote_errno)
+{
+ struct remote_state *rs = get_remote_state ();
+ char *p = rs->buf;
+ int left = get_remote_packet_size () - 1;
+
+ remote_buffer_add_string (&p, &left, "vFile:close:");
+
+ remote_buffer_add_int (&p, &left, fd);
+
+ return remote_hostio_send_command (p - rs->buf, PACKET_vFile_close,
+ remote_errno, NULL, NULL);
+}
+
+/* Unlink FILENAME on the remote target. Return 0, or -1 if an error
+ occurs (and set *REMOTE_ERRNO). */
+
+static int
+remote_hostio_unlink (const char *filename, int *remote_errno)
+{
+ struct remote_state *rs = get_remote_state ();
+ char *p = rs->buf;
+ int left = get_remote_packet_size () - 1;
+
+ remote_buffer_add_string (&p, &left, "vFile:unlink:");
+
+ remote_buffer_add_bytes (&p, &left, (const gdb_byte *) filename,
+ strlen (filename));
+
+ return remote_hostio_send_command (p - rs->buf, PACKET_vFile_unlink,
+ remote_errno, NULL, NULL);
+}
+
+static int
+remote_fileio_errno_to_host (int errnum)
+{
+ switch (errnum)
+ {
+ case FILEIO_EPERM:
+ return EPERM;
+ case FILEIO_ENOENT:
+ return ENOENT;
+ case FILEIO_EINTR:
+ return EINTR;
+ case FILEIO_EIO:
+ return EIO;
+ case FILEIO_EBADF:
+ return EBADF;
+ case FILEIO_EACCES:
+ return EACCES;
+ case FILEIO_EFAULT:
+ return EFAULT;
+ case FILEIO_EBUSY:
+ return EBUSY;
+ case FILEIO_EEXIST:
+ return EEXIST;
+ case FILEIO_ENODEV:
+ return ENODEV;
+ case FILEIO_ENOTDIR:
+ return ENOTDIR;
+ case FILEIO_EISDIR:
+ return EISDIR;
+ case FILEIO_EINVAL:
+ return EINVAL;
+ case FILEIO_ENFILE:
+ return ENFILE;
+ case FILEIO_EMFILE:
+ return EMFILE;
+ case FILEIO_EFBIG:
+ return EFBIG;
+ case FILEIO_ENOSPC:
+ return ENOSPC;
+ case FILEIO_ESPIPE:
+ return ESPIPE;
+ case FILEIO_EROFS:
+ return EROFS;
+ case FILEIO_ENOSYS:
+ return ENOSYS;
+ case FILEIO_ENAMETOOLONG:
+ return ENAMETOOLONG;
+ }
+ return -1;
+}
+
+static char *
+remote_hostio_error (int errnum)
+{
+ int host_error = remote_fileio_errno_to_host (errnum);
+
+ if (host_error == -1)
+ error (_("Unknown remote I/O error %d"), errnum);
+ else
+ error (_("Remote I/O error: %s"), safe_strerror (host_error));
+}
+
+static void
+remote_hostio_close_cleanup (void *opaque)
+{
+ int fd = *(int *) opaque;
+ int remote_errno;
+
+ remote_hostio_close (fd, &remote_errno);
+}
+
+
+static void *
+remote_bfd_iovec_open (struct bfd *abfd, void *open_closure)
+{
+ const char *filename = bfd_get_filename (abfd);
+ int fd, remote_errno;
+ int *stream;
+
+ gdb_assert (remote_filename_p (filename));
+
+ fd = remote_hostio_open (filename + 7, FILEIO_O_RDONLY, 0, &remote_errno);
+ if (fd == -1)
+ {
+ errno = remote_fileio_errno_to_host (remote_errno);
+ bfd_set_error (bfd_error_system_call);
+ return NULL;
+ }
+
+ stream = xmalloc (sizeof (int));
+ *stream = fd;
+ return stream;
+}
+
+static int
+remote_bfd_iovec_close (struct bfd *abfd, void *stream)
+{
+ int fd = *(int *)stream;
+ int remote_errno;
+
+ xfree (stream);
+
+ /* Ignore errors on close; these may happen if the remote
+ connection was already torn down. */
+ remote_hostio_close (fd, &remote_errno);
+
+ return 1;
+}
+
+static file_ptr
+remote_bfd_iovec_pread (struct bfd *abfd, void *stream, void *buf,
+ file_ptr nbytes, file_ptr offset)
+{
+ int fd = *(int *)stream;
+ int remote_errno;
+ file_ptr pos, bytes;
+
+ pos = 0;
+ while (nbytes > pos)
+ {
+ bytes = remote_hostio_pread (fd, (char *)buf + pos, nbytes - pos,
+ offset + pos, &remote_errno);
+ if (bytes == 0)
+ /* Success, but no bytes, means end-of-file. */
+ break;
+ if (bytes == -1)
+ {
+ errno = remote_fileio_errno_to_host (remote_errno);
+ bfd_set_error (bfd_error_system_call);
+ return -1;
+ }
+
+ pos += bytes;
+ }
+
+ return pos;
+}
+
+static int
+remote_bfd_iovec_stat (struct bfd *abfd, void *stream, struct stat *sb)
+{
+ /* FIXME: We should probably implement remote_hostio_stat. */
+ sb->st_size = INT_MAX;
+ return 0;
+}
+
+int
+remote_filename_p (const char *filename)
+{
+ return strncmp (filename, "remote:", 7) == 0;
+}
+
+bfd *
+remote_bfd_open (const char *remote_file, const char *target)
+{
+ return bfd_openr_iovec (remote_file, target,
+ remote_bfd_iovec_open, NULL,
+ remote_bfd_iovec_pread,
+ remote_bfd_iovec_close,
+ remote_bfd_iovec_stat);
+}
+
+void
+remote_file_put (const char *local_file, const char *remote_file, int from_tty)
+{
+ struct cleanup *back_to, *close_cleanup;
+ int retcode, fd, remote_errno, bytes, io_size;
+ FILE *file;
+ gdb_byte *buffer;
+ int bytes_in_buffer;
+ int saw_eof;
+ ULONGEST offset;
-static void display_thread_info (struct gdb_ext_thread_info *info);
+ if (!remote_desc)
+ error (_("command can only be used with remote target"));
-static void threadset_test_cmd (char *cmd, int tty);
+ file = fopen (local_file, "rb");
+ if (file == NULL)
+ perror_with_name (local_file);
+ back_to = make_cleanup_fclose (file);
-static void threadalive_test (char *cmd, int tty);
+ fd = remote_hostio_open (remote_file, (FILEIO_O_WRONLY | FILEIO_O_CREAT
+ | FILEIO_O_TRUNC),
+ 0700, &remote_errno);
+ if (fd == -1)
+ remote_hostio_error (remote_errno);
-static void threadlist_test_cmd (char *cmd, int tty);
+ /* Send up to this many bytes at once. They won't all fit in the
+ remote packet limit, so we'll transfer slightly fewer. */
+ io_size = get_remote_packet_size ();
+ buffer = xmalloc (io_size);
+ make_cleanup (xfree, buffer);
-int get_and_display_threadinfo (threadref *ref);
+ close_cleanup = make_cleanup (remote_hostio_close_cleanup, &fd);
-static void threadinfo_test_cmd (char *cmd, int tty);
+ bytes_in_buffer = 0;
+ saw_eof = 0;
+ offset = 0;
+ while (bytes_in_buffer || !saw_eof)
+ {
+ if (!saw_eof)
+ {
+ bytes = fread (buffer + bytes_in_buffer, 1, io_size - bytes_in_buffer,
+ file);
+ if (bytes == 0)
+ {
+ if (ferror (file))
+ error (_("Error reading %s."), local_file);
+ else
+ {
+ /* EOF. Unless there is something still in the
+ buffer from the last iteration, we are done. */
+ saw_eof = 1;
+ if (bytes_in_buffer == 0)
+ break;
+ }
+ }
+ }
+ else
+ bytes = 0;
-static int thread_display_step (threadref *ref, void *context);
+ bytes += bytes_in_buffer;
+ bytes_in_buffer = 0;
-static void threadlist_update_test_cmd (char *cmd, int tty);
+ retcode = remote_hostio_pwrite (fd, buffer, bytes, offset, &remote_errno);
-static void init_remote_threadtests (void);
+ if (retcode < 0)
+ remote_hostio_error (remote_errno);
+ else if (retcode == 0)
+ error (_("Remote write of %d bytes returned 0!"), bytes);
+ else if (retcode < bytes)
+ {
+ /* Short write. Save the rest of the read data for the next
+ write. */
+ bytes_in_buffer = bytes - retcode;
+ memmove (buffer, buffer + retcode, bytes_in_buffer);
+ }
-#define SAMPLE_THREAD 0x05060708 /* Truncated 64 bit threadid. */
+ offset += retcode;
+ }
-static void
-threadset_test_cmd (char *cmd, int tty)
-{
- int sample_thread = SAMPLE_THREAD;
+ discard_cleanups (close_cleanup);
+ if (remote_hostio_close (fd, &remote_errno))
+ remote_hostio_error (remote_errno);
- printf_filtered (_("Remote threadset test\n"));
- set_thread (sample_thread, 1);
+ if (from_tty)
+ printf_filtered (_("Successfully sent file \"%s\".\n"), local_file);
+ do_cleanups (back_to);
}
-
-static void
-threadalive_test (char *cmd, int tty)
+void
+remote_file_get (const char *remote_file, const char *local_file, int from_tty)
{
- int sample_thread = SAMPLE_THREAD;
+ struct cleanup *back_to, *close_cleanup;
+ int retcode, fd, remote_errno, bytes, io_size;
+ FILE *file;
+ gdb_byte *buffer;
+ ULONGEST offset;
- if (remote_thread_alive (pid_to_ptid (sample_thread)))
- printf_filtered ("PASS: Thread alive test\n");
- else
- printf_filtered ("FAIL: Thread alive test\n");
-}
+ if (!remote_desc)
+ error (_("command can only be used with remote target"));
-void output_threadid (char *title, threadref *ref);
+ fd = remote_hostio_open (remote_file, FILEIO_O_RDONLY, 0, &remote_errno);
+ if (fd == -1)
+ remote_hostio_error (remote_errno);
-void
-output_threadid (char *title, threadref *ref)
-{
- char hexid[20];
+ file = fopen (local_file, "wb");
+ if (file == NULL)
+ perror_with_name (local_file);
+ back_to = make_cleanup_fclose (file);
- pack_threadid (&hexid[0], ref); /* Convert threead id into hex. */
- hexid[16] = 0;
- printf_filtered ("%s %s\n", title, (&hexid[0]));
-}
+ /* Send up to this many bytes at once. They won't all fit in the
+ remote packet limit, so we'll transfer slightly fewer. */
+ io_size = get_remote_packet_size ();
+ buffer = xmalloc (io_size);
+ make_cleanup (xfree, buffer);
-static void
-threadlist_test_cmd (char *cmd, int tty)
-{
- int startflag = 1;
- threadref nextthread;
- int done, result_count;
- threadref threadlist[3];
+ close_cleanup = make_cleanup (remote_hostio_close_cleanup, &fd);
- printf_filtered ("Remote Threadlist test\n");
- if (!remote_get_threadlist (startflag, &nextthread, 3, &done,
- &result_count, &threadlist[0]))
- printf_filtered ("FAIL: threadlist test\n");
- else
+ offset = 0;
+ while (1)
{
- threadref *scan = threadlist;
- threadref *limit = scan + result_count;
+ bytes = remote_hostio_pread (fd, buffer, io_size, offset, &remote_errno);
+ if (bytes == 0)
+ /* Success, but no bytes, means end-of-file. */
+ break;
+ if (bytes == -1)
+ remote_hostio_error (remote_errno);
- while (scan < limit)
- output_threadid (" thread ", scan++);
+ offset += bytes;
+
+ bytes = fwrite (buffer, 1, bytes, file);
+ if (bytes == 0)
+ perror_with_name (local_file);
}
+
+ discard_cleanups (close_cleanup);
+ if (remote_hostio_close (fd, &remote_errno))
+ remote_hostio_error (remote_errno);
+
+ if (from_tty)
+ printf_filtered (_("Successfully fetched file \"%s\".\n"), remote_file);
+ do_cleanups (back_to);
}
void
-display_thread_info (struct gdb_ext_thread_info *info)
+remote_file_delete (const char *remote_file, int from_tty)
{
- output_threadid ("Threadid: ", &info->threadid);
- printf_filtered ("Name: %s\n ", info->shortname);
- printf_filtered ("State: %s\n", info->display);
- printf_filtered ("other: %s\n\n", info->more_display);
-}
+ int retcode, remote_errno;
-int
-get_and_display_threadinfo (threadref *ref)
-{
- int result;
- int set;
- struct gdb_ext_thread_info threadinfo;
+ if (!remote_desc)
+ error (_("command can only be used with remote target"));
- set = TAG_THREADID | TAG_EXISTS | TAG_THREADNAME
- | TAG_MOREDISPLAY | TAG_DISPLAY;
- if (0 != (result = remote_get_threadinfo (ref, set, &threadinfo)))
- display_thread_info (&threadinfo);
- return result;
+ retcode = remote_hostio_unlink (remote_file, &remote_errno);
+ if (retcode == -1)
+ remote_hostio_error (remote_errno);
+
+ if (from_tty)
+ printf_filtered (_("Successfully deleted file \"%s\".\n"), remote_file);
}
static void
-threadinfo_test_cmd (char *cmd, int tty)
+remote_put_command (char *args, int from_tty)
{
- int athread = SAMPLE_THREAD;
- threadref thread;
- int set;
+ struct cleanup *back_to;
+ char **argv;
- int_to_threadref (&thread, athread);
- printf_filtered ("Remote Threadinfo test\n");
- if (!get_and_display_threadinfo (&thread))
- printf_filtered ("FAIL cannot get thread info\n");
-}
+ if (args == NULL)
+ error_no_arg (_("file to put"));
-static int
-thread_display_step (threadref *ref, void *context)
-{
- /* output_threadid(" threadstep ",ref); *//* simple test */
- return get_and_display_threadinfo (ref);
+ argv = gdb_buildargv (args);
+ back_to = make_cleanup_freeargv (argv);
+ if (argv[0] == NULL || argv[1] == NULL || argv[2] != NULL)
+ error (_("Invalid parameters to remote put"));
+
+ remote_file_put (argv[0], argv[1], from_tty);
+
+ do_cleanups (back_to);
}
static void
-threadlist_update_test_cmd (char *cmd, int tty)
+remote_get_command (char *args, int from_tty)
{
- printf_filtered ("Remote Threadlist update test\n");
- remote_threadlist_iterator (thread_display_step, 0, CRAZY_MAX_THREADS);
+ struct cleanup *back_to;
+ char **argv;
+
+ if (args == NULL)
+ error_no_arg (_("file to get"));
+
+ argv = gdb_buildargv (args);
+ back_to = make_cleanup_freeargv (argv);
+ if (argv[0] == NULL || argv[1] == NULL || argv[2] != NULL)
+ error (_("Invalid parameters to remote get"));
+
+ remote_file_get (argv[0], argv[1], from_tty);
+
+ do_cleanups (back_to);
}
static void
-init_remote_threadtests (void)
+remote_delete_command (char *args, int from_tty)
{
- add_com ("tlist", class_obscure, threadlist_test_cmd, _("\
-Fetch and print the remote list of thread identifiers, one pkt only"));
- add_com ("tinfo", class_obscure, threadinfo_test_cmd,
- _("Fetch and display info about one thread"));
- add_com ("tset", class_obscure, threadset_test_cmd,
- _("Test setting to a different thread"));
- add_com ("tupd", class_obscure, threadlist_update_test_cmd,
- _("Iterate through updating all remote thread info"));
- add_com ("talive", class_obscure, threadalive_test,
- _(" Remote thread alive test "));
-}
+ struct cleanup *back_to;
+ char **argv;
-#endif /* 0 */
+ if (args == NULL)
+ error_no_arg (_("file to delete"));
-/* Convert a thread ID to a string. Returns the string in a static
- buffer. */
+ argv = gdb_buildargv (args);
+ back_to = make_cleanup_freeargv (argv);
+ if (argv[0] == NULL || argv[1] != NULL)
+ error (_("Invalid parameters to remote delete"));
-static char *
-remote_pid_to_str (ptid_t ptid)
-{
- static char buf[32];
+ remote_file_delete (argv[0], from_tty);
- xsnprintf (buf, sizeof buf, "Thread %d", ptid_get_pid (ptid));
- return buf;
+ do_cleanups (back_to);
}
-/* Get the address of the thread local variable in OBJFILE which is
- stored at OFFSET within the thread local storage for thread PTID. */
-
-static CORE_ADDR
-remote_get_thread_local_address (ptid_t ptid, CORE_ADDR lm, CORE_ADDR offset)
+static void
+remote_command (char *args, int from_tty)
{
- if (remote_protocol_packets[PACKET_qGetTLSAddr].support != PACKET_DISABLE)
- {
- struct remote_state *rs = get_remote_state ();
- char *p = rs->buf;
- enum packet_result result;
+ help_list (remote_cmdlist, "remote ", -1, gdb_stdout);
+}
- strcpy (p, "qGetTLSAddr:");
- p += strlen (p);
- p += hexnumstr (p, PIDGET (ptid));
- *p++ = ',';
- p += hexnumstr (p, offset);
- *p++ = ',';
- p += hexnumstr (p, lm);
- *p++ = '\0';
+static int remote_target_can_reverse = 1;
- putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
- result = packet_ok (rs->buf, &remote_protocol_packets[PACKET_qGetTLSAddr]);
- if (result == PACKET_OK)
- {
- ULONGEST result;
+static int
+remote_can_execute_reverse (void)
+{
+ return remote_target_can_reverse;
+}
- unpack_varlen_hex (rs->buf, &result);
- return result;
- }
- else if (result == PACKET_UNKNOWN)
- throw_error (TLS_GENERIC_ERROR,
- _("Remote target doesn't support qGetTLSAddr packet"));
- else
- throw_error (TLS_GENERIC_ERROR,
- _("Remote target failed to process qGetTLSAddr request"));
- }
- else
- throw_error (TLS_GENERIC_ERROR,
- _("TLS not supported or disabled on this target"));
- /* Not reached. */
- return 0;
+static int
+remote_supports_non_stop (void)
+{
+ return 1;
+}
+
+static int
+remote_supports_multi_process (void)
+{
+ struct remote_state *rs = get_remote_state ();
+ return remote_multi_process_p (rs);
}
static void
remote_ops.to_stop = remote_stop;
remote_ops.to_xfer_partial = remote_xfer_partial;
remote_ops.to_rcmd = remote_rcmd;
+ remote_ops.to_log_command = serial_log_command;
remote_ops.to_get_thread_local_address = remote_get_thread_local_address;
remote_ops.to_stratum = process_stratum;
remote_ops.to_has_all_memory = 1;
remote_ops.to_has_registers = 1;
remote_ops.to_has_execution = 1;
remote_ops.to_has_thread_control = tc_schedlock; /* can lock scheduler */
+ remote_ops.to_can_execute_reverse = remote_can_execute_reverse;
remote_ops.to_magic = OPS_MAGIC;
remote_ops.to_memory_map = remote_memory_map;
remote_ops.to_flash_erase = remote_flash_erase;
remote_ops.to_flash_done = remote_flash_done;
+ remote_ops.to_read_description = remote_read_description;
+ remote_ops.to_search_memory = remote_search_memory;
+ remote_ops.to_can_async_p = remote_can_async_p;
+ remote_ops.to_is_async_p = remote_is_async_p;
+ remote_ops.to_async = remote_async;
+ remote_ops.to_async_mask = remote_async_mask;
+ remote_ops.to_terminal_inferior = remote_terminal_inferior;
+ remote_ops.to_terminal_ours = remote_terminal_ours;
+ remote_ops.to_supports_non_stop = remote_supports_non_stop;
+ remote_ops.to_supports_multi_process = remote_supports_multi_process;
}
/* Set up the extended remote vector by making a copy of the standard
"Extended remote serial target in gdb-specific protocol";
extended_remote_ops.to_doc =
"Use a remote computer via a serial line, using a gdb-specific protocol.\n\
-Specify the serial device it is connected to (e.g. /dev/ttya).",
- extended_remote_ops.to_open = extended_remote_open;
+Specify the serial device it is connected to (e.g. /dev/ttya).";
+ extended_remote_ops.to_open = extended_remote_open;
extended_remote_ops.to_create_inferior = extended_remote_create_inferior;
extended_remote_ops.to_mourn_inferior = extended_remote_mourn;
+ extended_remote_ops.to_detach = extended_remote_detach;
+ extended_remote_ops.to_attach = extended_remote_attach;
+ extended_remote_ops.to_kill = extended_remote_kill;
}
static int
remote_can_async_p (void)
{
+ if (!target_async_permitted)
+ /* We only enable async when the user specifically asks for it. */
+ return 0;
+
/* We're async whenever the serial device is. */
- return (current_target.to_async_mask_value) && serial_can_async_p (remote_desc);
+ return remote_async_mask_value && serial_can_async_p (remote_desc);
}
static int
remote_is_async_p (void)
{
+ if (!target_async_permitted)
+ /* We only enable async when the user specifically asks for it. */
+ return 0;
+
/* We're async whenever the serial device is. */
- return (current_target.to_async_mask_value) && serial_is_async_p (remote_desc);
+ return remote_async_mask_value && serial_is_async_p (remote_desc);
}
/* Pass the SERIAL event on and up to the client. One day this code
async_client_callback (INF_REG_EVENT, async_client_context);
}
+static void
+remote_async_inferior_event_handler (gdb_client_data data)
+{
+ inferior_event_handler (INF_REG_EVENT, NULL);
+}
+
+static void
+remote_async_get_pending_events_handler (gdb_client_data data)
+{
+ remote_get_pending_stop_replies ();
+}
+
static void
remote_async (void (*callback) (enum inferior_event_type event_type,
void *context), void *context)
{
- if (current_target.to_async_mask_value == 0)
+ if (remote_async_mask_value == 0)
internal_error (__FILE__, __LINE__,
_("Calling remote_async when async is masked"));
serial_async (remote_desc, NULL, NULL);
}
-/* Target async and target extended-async.
-
- This are temporary targets, until it is all tested. Eventually
- async support will be incorporated int the usual 'remote'
- target. */
-
-static void
-init_remote_async_ops (void)
-{
- remote_async_ops.to_shortname = "async";
- remote_async_ops.to_longname =
- "Remote serial target in async version of the gdb-specific protocol";
- remote_async_ops.to_doc =
- "Use a remote computer via a serial line, using a gdb-specific protocol.\n\
-Specify the serial device it is connected to (e.g. /dev/ttya).";
- remote_async_ops.to_open = remote_async_open;
- remote_async_ops.to_close = remote_close;
- remote_async_ops.to_detach = remote_detach;
- remote_async_ops.to_disconnect = remote_disconnect;
- remote_async_ops.to_resume = remote_async_resume;
- remote_async_ops.to_wait = remote_async_wait;
- remote_async_ops.to_fetch_registers = remote_fetch_registers;
- remote_async_ops.to_store_registers = remote_store_registers;
- remote_async_ops.to_prepare_to_store = remote_prepare_to_store;
- remote_async_ops.deprecated_xfer_memory = remote_xfer_memory;
- remote_async_ops.to_files_info = remote_files_info;
- remote_async_ops.to_insert_breakpoint = remote_insert_breakpoint;
- remote_async_ops.to_remove_breakpoint = remote_remove_breakpoint;
- remote_async_ops.to_can_use_hw_breakpoint = remote_check_watch_resources;
- remote_async_ops.to_insert_hw_breakpoint = remote_insert_hw_breakpoint;
- remote_async_ops.to_remove_hw_breakpoint = remote_remove_hw_breakpoint;
- remote_async_ops.to_insert_watchpoint = remote_insert_watchpoint;
- remote_async_ops.to_remove_watchpoint = remote_remove_watchpoint;
- remote_async_ops.to_stopped_by_watchpoint = remote_stopped_by_watchpoint;
- remote_async_ops.to_stopped_data_address = remote_stopped_data_address;
- remote_async_ops.to_terminal_inferior = remote_async_terminal_inferior;
- remote_async_ops.to_terminal_ours = remote_async_terminal_ours;
- remote_async_ops.to_kill = remote_async_kill;
- remote_async_ops.to_load = generic_load;
- remote_async_ops.to_mourn_inferior = remote_async_mourn;
- remote_async_ops.to_thread_alive = remote_thread_alive;
- remote_async_ops.to_find_new_threads = remote_threads_info;
- remote_async_ops.to_pid_to_str = remote_pid_to_str;
- remote_async_ops.to_extra_thread_info = remote_threads_extra_info;
- remote_async_ops.to_stop = remote_stop;
- remote_async_ops.to_xfer_partial = remote_xfer_partial;
- remote_async_ops.to_rcmd = remote_rcmd;
- remote_async_ops.to_stratum = process_stratum;
- remote_async_ops.to_has_all_memory = 1;
- remote_async_ops.to_has_memory = 1;
- remote_async_ops.to_has_stack = 1;
- remote_async_ops.to_has_registers = 1;
- remote_async_ops.to_has_execution = 1;
- remote_async_ops.to_has_thread_control = tc_schedlock; /* can lock scheduler */
- remote_async_ops.to_can_async_p = remote_can_async_p;
- remote_async_ops.to_is_async_p = remote_is_async_p;
- remote_async_ops.to_async = remote_async;
- remote_async_ops.to_async_mask_value = 1;
- remote_async_ops.to_magic = OPS_MAGIC;
- remote_async_ops.to_memory_map = remote_memory_map;
- remote_async_ops.to_flash_erase = remote_flash_erase;
- remote_async_ops.to_flash_done = remote_flash_done;
-}
-
-/* Set up the async extended remote vector by making a copy of the standard
- remote vector and adding to it. */
-
-static void
-init_extended_async_remote_ops (void)
+static int
+remote_async_mask (int new_mask)
{
- extended_async_remote_ops = remote_async_ops;
-
- extended_async_remote_ops.to_shortname = "extended-async";
- extended_async_remote_ops.to_longname =
- "Extended remote serial target in async gdb-specific protocol";
- extended_async_remote_ops.to_doc =
- "Use a remote computer via a serial line, using an async gdb-specific protocol.\n\
-Specify the serial device it is connected to (e.g. /dev/ttya).",
- extended_async_remote_ops.to_open = extended_remote_async_open;
- extended_async_remote_ops.to_create_inferior = extended_remote_async_create_inferior;
- extended_async_remote_ops.to_mourn_inferior = extended_remote_mourn;
+ int curr_mask = remote_async_mask_value;
+ remote_async_mask_value = new_mask;
+ return curr_mask;
}
static void
do_cleanups (showlist_chain);
}
-static void
-build_remote_gdbarch_data (void)
-{
- remote_address_size = TARGET_ADDR_BIT;
-}
-
-/* Saved pointer to previous owner of the new_objfile event. */
-static void (*remote_new_objfile_chain) (struct objfile *);
/* Function to be called whenever a new objfile (shlib) is detected. */
static void
remote_new_objfile (struct objfile *objfile)
{
if (remote_desc != 0) /* Have a remote connection. */
- {
- remote_check_symbols (objfile);
- }
- /* Call predecessor on chain, if any. */
- if (remote_new_objfile_chain)
- remote_new_objfile_chain (objfile);
+ remote_check_symbols (objfile);
}
void
/* architecture specific data */
remote_gdbarch_data_handle =
gdbarch_data_register_post_init (init_remote_state);
-
- /* Old tacky stuff. NOTE: This comes after the remote protocol so
- that the remote protocol has been initialized. */
- DEPRECATED_REGISTER_GDBARCH_SWAP (remote_address_size);
- deprecated_register_gdbarch_swap (NULL, 0, build_remote_gdbarch_data);
+ remote_g_packet_data_handle =
+ gdbarch_data_register_pre_init (remote_g_packet_data_init);
/* Initialize the per-target state. At the moment there is only one
of these, not one per target. Only one target is active at a
init_extended_remote_ops ();
add_target (&extended_remote_ops);
- init_remote_async_ops ();
- add_target (&remote_async_ops);
-
- init_extended_async_remote_ops ();
- add_target (&extended_async_remote_ops);
-
/* Hook into new objfile notification. */
- remote_new_objfile_chain = deprecated_target_new_objfile_hook;
- deprecated_target_new_objfile_hook = remote_new_objfile;
+ observer_attach_new_objfile (remote_new_objfile);
+
+ /* Set up signal handlers. */
+ sigint_remote_token =
+ create_async_signal_handler (async_remote_interrupt, NULL);
+ sigint_remote_twice_token =
+ create_async_signal_handler (inferior_event_handler_wrapper, NULL);
#if 0
init_remote_threadtests ();
add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_auxv],
"qXfer:auxv:read", "read-aux-vector", 0);
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_features],
+ "qXfer:features:read", "target-features", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_libraries],
+ "qXfer:libraries:read", "library-info", 0);
+
add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_memory_map],
"qXfer:memory-map:read", "memory-map", 0);
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_spu_read],
+ "qXfer:spu:read", "read-spu-object", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_spu_write],
+ "qXfer:spu:write", "write-spu-object", 0);
+
add_packet_config_cmd (&remote_protocol_packets[PACKET_qGetTLSAddr],
"qGetTLSAddr", "get-thread-local-storage-address",
0);
add_packet_config_cmd (&remote_protocol_packets[PACKET_qSupported],
"qSupported", "supported-packets", 0);
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_qSearch_memory],
+ "qSearch:memory", "search-memory", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_vFile_open],
+ "vFile:open", "hostio-open", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_vFile_pread],
+ "vFile:pread", "hostio-pread", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_vFile_pwrite],
+ "vFile:pwrite", "hostio-pwrite", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_vFile_close],
+ "vFile:close", "hostio-close", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_vFile_unlink],
+ "vFile:unlink", "hostio-unlink", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_vAttach],
+ "vAttach", "attach", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_vRun],
+ "vRun", "run", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_QStartNoAckMode],
+ "QStartNoAckMode", "noack", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_vKill],
+ "vKill", "kill", 0);
+
/* Keep the old ``set remote Z-packet ...'' working. Each individual
Z sub-packet has its own set and show commands, but users may
have sets to this variable in their .gdbinit files (or in their
show_remote_protocol_Z_packet_cmd, /* FIXME: i18n: Use of remote protocol `Z' packets is %s. */
&remote_set_cmdlist, &remote_show_cmdlist);
+ add_prefix_cmd ("remote", class_files, remote_command, _("\
+Manipulate files on the remote system\n\
+Transfer files to and from the remote target system."),
+ &remote_cmdlist, "remote ",
+ 0 /* allow-unknown */, &cmdlist);
+
+ add_cmd ("put", class_files, remote_put_command,
+ _("Copy a local file to the remote system."),
+ &remote_cmdlist);
+
+ add_cmd ("get", class_files, remote_get_command,
+ _("Copy a remote file to the local system."),
+ &remote_cmdlist);
+
+ add_cmd ("delete", class_files, remote_delete_command,
+ _("Delete a remote file."),
+ &remote_cmdlist);
+
+ remote_exec_file = xstrdup ("");
+ add_setshow_string_noescape_cmd ("exec-file", class_files,
+ &remote_exec_file, _("\
+Set the remote pathname for \"run\""), _("\
+Show the remote pathname for \"run\""), NULL, NULL, NULL,
+ &remote_set_cmdlist, &remote_show_cmdlist);
+
/* Eventually initialize fileio. See fileio.c */
initialize_remote_fileio (remote_set_cmdlist, remote_show_cmdlist);
+
+ /* Take advantage of the fact that the LWP field is not used, to tag
+ special ptids with it set to != 0. */
+ magic_null_ptid = ptid_build (42000, 1, -1);
+ not_sent_ptid = ptid_build (42000, 1, -2);
+ any_thread_ptid = ptid_build (42000, 1, 0);
}