- - if CSUM is incorrect
<data> is as follows:
- All values are encoded in ascii hex digits.
+ Most values are encoded in ascii hex digits. Signal numbers are according
+ to the numbering in target.h.
Request Packet
+ set thread Hct... Set thread for subsequent operations.
+ c = 'c' for thread used in step and
+ continue; t... can be -1 for all
+ threads.
+ c = 'g' for thread used in other
+ operations. If zero, pick a thread,
+ any thread.
+ reply OK for success
+ ENN for an error.
+
read registers g
reply XX....X Each byte of register data
is described by two hex digits.
where only part of the data was
written).
- cont cAA..AA AA..AA is address to resume
+ continue cAA..AA AA..AA is address to resume
If AA..AA is omitted,
resume at same address.
If AA..AA is omitted,
resume at same address.
+ continue with Csig;AA Continue with signal sig (hex signal
+ signal number).
+
+ step with Ssig;AA Like 'C' but step not continue.
+ signal
+
last signal ? Reply the current reason for stopping.
This is the same reply as is generated
for step or cont : SAA where AA is the
There is no immediate reply to step or cont.
The reply comes when the machine stops.
- It is SAA AA is the "signal number"
+ It is SAA AA is the signal number.
- or... TAAn...:r...;n:r...;n...:r...;
+ or... TAAn...:r...;n...:r...;n...:r...;
AA = signal number
- n... = register number
- r... = register contents
+ n... = register number (hex)
+ r... = register contents
+ n... = `thread'
+ r... = thread process ID. This is
+ a hex integer.
+ n... = other string not starting
+ with valid hex digit.
+ gdb should ignore this n,r pair
+ and go on to the next. This way
+ we can extend the protocol.
or... WAA The process exited, and AA is
the exit status. This is only
applicable for certains sorts of
targets.
+ or... XAA The process terminated with signal
+ AA.
+ or... Otext Send text to stdout. This can happen
+ at any time while the program is
+ running and the debugger should
+ continue to wait for 'W', 'T', etc.
+
kill request k
toggle debug d toggle debug flag (see 386 & 68k stubs)
general set QXXXX=yyyy Set value of XXXX to yyyy.
query sect offs qOffsets Get section offsets. Reply is
Text=xxx;Data=yyy;Bss=zzz
- console output Otext Send text to stdout. Only comes from
- remote target.
Responses can be run-length encoded to save space. A '*' means that
the next character is an ASCII encoding giving a repeat count which
static void
getpkt PARAMS ((char *buf, int forever));
-static void
+static int
putpkt PARAMS ((char *buf));
static void
doesn't support 'P', the only consequence is some unnecessary traffic. */
static int stub_supports_P = 1;
+\f
+/* These are the threads which we last sent to the remote system. -1 for all
+ or -2 for not sent yet. */
+int general_thread;
+int cont_thread;
+
+static void
+set_thread (th, gen)
+ int th;
+ int gen;
+{
+ char buf[PBUFSIZ];
+ int state = gen ? general_thread : cont_thread;
+ if (state == th)
+ return;
+ buf[0] = 'H';
+ buf[1] = gen ? 'g' : 'c';
+ if (th == 42000)
+ {
+ buf[2] = '0';
+ buf[3] = '\0';
+ }
+ else if (th < 0)
+ sprintf (&buf[2], "-%x", -th);
+ else
+ sprintf (&buf[2], "%x", th);
+ putpkt (buf);
+ getpkt (buf, 0);
+ if (gen)
+ general_thread = th;
+ else
+ cont_thread = th;
+}
\f
/* Clean up connection to a remote debugger. */
SERIAL_WRITE (remote_desc, "+", 1);
+ /* Let the stub know that we want it to return the thread. */
+ set_thread (-1, 0);
+
get_offsets (); /* Get text, data & bss offsets */
putpkt ("?"); /* initiate a query from remote machine */
stub to another, we can (if the target is closed and reopened) cope. */
stub_supports_P = 1;
+ general_thread = -2;
+ cont_thread = -2;
+
/* Without this, some commands which require an active target (such as kill)
won't work. This variable serves (at least) double duty as both the pid
of the target process (if it has such), and as a flag indicating that a
\f
/* Tell the remote machine to resume. */
+static enum target_signal last_sent_signal = TARGET_SIGNAL_0;
+int last_sent_step;
+
static void
remote_resume (pid, step, siggnal)
int pid, step;
{
char buf[PBUFSIZ];
- if (siggnal)
- {
- target_terminal_ours_for_output ();
- printf_filtered
- ("Can't send signals to a remote system. %s not sent.\n",
- target_signal_to_name (siggnal));
- target_terminal_inferior ();
- }
+ if (pid == -1)
+ set_thread (inferior_pid, 0);
+ else
+ set_thread (pid, 0);
dcache_flush (remote_dcache);
- strcpy (buf, step ? "s": "c");
+ last_sent_signal = siggnal;
+ last_sent_step = step;
+
+ if (siggnal != TARGET_SIGNAL_0)
+ {
+ buf[0] = step ? 'S' : 'C';
+ buf[1] = tohex (((int)siggnal >> 4) & 0xf);
+ buf[2] = tohex ((int)siggnal & 0xf);
+ buf[3] = '\0';
+ }
+ else
+ strcpy (buf, step ? "s": "c");
putpkt (buf);
}
target_terminal_inferior ();
}
+/* If nonzero, ignore the next kill. */
+int kill_kludge;
+
/* Wait until the remote machine stops, then return,
storing status in STATUS just as `wait' would.
Returns "pid" (though it's not clear what, if anything, that
struct target_waitstatus *status;
{
unsigned char buf[PBUFSIZ];
+ int thread_num = -1;
status->kind = TARGET_WAITKIND_EXITED;
status->value.integer = 0;
regno = strtol (p, &p1, 16); /* Read the register number */
if (p1 == p)
- warning ("Remote sent badly formed register number: %s\nPacket: '%s'\n",
- p1, buf);
-
- p = p1;
-
- if (*p++ != ':')
- warning ("Malformed packet (missing colon): %s\nPacket: '%s'\n",
- p, buf);
-
- if (regno >= NUM_REGS)
- warning ("Remote sent bad register number %d: %s\nPacket: '%s'\n",
- regno, p, buf);
-
- for (i = 0; i < REGISTER_RAW_SIZE (regno); i++)
{
- if (p[0] == 0 || p[1] == 0)
- warning ("Remote reply is too short: %s", buf);
- regs[i] = fromhex (p[0]) * 16 + fromhex (p[1]);
- p += 2;
+ p1 = (unsigned char *) strchr (p, ':');
+ if (p1 == NULL)
+ warning ("Malformed packet (missing colon): %s\n\
+Packet: '%s'\n",
+ p, buf);
+ if (strncmp (p, "thread", p1 - p) == 0)
+ {
+ char *p2;
+ thread_num = strtol (++p1, &p, 16);
+ }
+ }
+ else
+ {
+ p = p1;
+
+ if (*p++ != ':')
+ warning ("Malformed packet (missing colon): %s\n\
+Packet: '%s'\n",
+ p, buf);
+
+ if (regno >= NUM_REGS)
+ warning ("Remote sent bad register number %d: %s\n\
+Packet: '%s'\n",
+ regno, p, buf);
+
+ for (i = 0; i < REGISTER_RAW_SIZE (regno); i++)
+ {
+ if (p[0] == 0 || p[1] == 0)
+ warning ("Remote reply is too short: %s", buf);
+ regs[i] = fromhex (p[0]) * 16 + fromhex (p[1]);
+ p += 2;
+ }
+ supply_register (regno, regs);
}
if (*p++ != ';')
warning ("Remote register badly formatted: %s", buf);
-
- supply_register (regno, regs);
}
}
/* fall through */
status->value.sig = (enum target_signal)
(((fromhex (buf[1])) << 4) + (fromhex (buf[2])));
- return inferior_pid;
+ goto got_status;
case 'W': /* Target exited */
{
/* The remote process exited. */
status->kind = TARGET_WAITKIND_EXITED;
status->value.integer = (fromhex (buf[1]) << 4) + fromhex (buf[2]);
- return inferior_pid;
+ goto got_status;
}
+ case 'X':
+ status->kind = TARGET_WAITKIND_SIGNALLED;
+ status->value.sig = (enum target_signal)
+ (((fromhex (buf[1])) << 4) + (fromhex (buf[2])));
+ kill_kludge = 1;
+
+ goto got_status;
case 'O': /* Console output */
fputs_filtered ((char *)(buf + 1), gdb_stdout);
continue;
+ case '\0':
+ if (last_sent_signal != TARGET_SIGNAL_0)
+ {
+ /* Zero length reply means that we tried 'S' or 'C' and
+ the remote system doesn't support it. */
+ target_terminal_ours_for_output ();
+ printf_filtered
+ ("Can't send signals to this remote system. %s not sent.\n",
+ target_signal_to_name (last_sent_signal));
+ last_sent_signal = TARGET_SIGNAL_0;
+ target_terminal_inferior ();
+
+ strcpy (buf, last_sent_step ? 's' : 'c');
+ putpkt (buf);
+ continue;
+ }
+ /* else fallthrough */
default:
warning ("Invalid remote reply: %s", buf);
continue;
}
}
+ got_status:
+ if (thread_num != -1)
+ {
+ /* Initial thread value can only be acquired via wait, so deal with
+ this marker which is used before the first thread value is
+ acquired. */
+ if (inferior_pid == 42000)
+ {
+ inferior_pid = thread_num;
+ add_thread (inferior_pid);
+ }
+ return thread_num;
+ }
+ return inferior_pid;
}
/* Number of bytes of registers this stub implements. */
char *p;
char regs[REGISTER_BYTES];
+ set_thread (inferior_pid, 1);
+
sprintf (buf, "g");
remote_send (buf);
int i;
char *p;
+ set_thread (inferior_pid, 1);
+
if (regno >= 0 && stub_supports_P)
{
/* Try storing a single register. */
int bytes_xferred;
int total_xferred = 0;
+ set_thread (inferior_pid, 1);
+
while (len > 0)
{
if (len > MAXBUFBYTES)
/* Send a packet to the remote machine, with error checking.
The data of the packet is in BUF. */
-static void
+static int
putpkt (buf)
char *buf;
{
case '+':
if (remote_debug)
printf_unfiltered("Ack\n");
- return;
+ return 1;
case SERIAL_TIMEOUT:
break; /* Retransmit buffer */
case '$':
static void
remote_kill ()
{
- putpkt ("k");
+ /* For some mysterious reason, wait_for_inferior calls kill instead of
+ mourn after it gets TARGET_WAITKIND_SIGNALLED. Work around it. */
+ if (kill_kludge)
+ {
+ kill_kludge = 0;
+ target_mourn_inferior ();
+ return;
+ }
+
+ /* Use catch_errors so the user can quit from gdb even when we aren't on
+ speaking terms with the remote system. */
+ catch_errors (putpkt, "k", "", RETURN_MASK_ERROR);
+
/* Don't wait for it to die. I'm not really sure it matters whether
we do or not. For the existing stubs, kill is a noop. */
target_mourn_inferior ();
projects / binutils-gdb.git / blobdiff