/* Remote target communications for serial-line targets in custom GDB protocol
- Copyright (C) 1988-2020 Free Software Foundation, Inc.
+ Copyright (C) 1988-2021 Free Software Foundation, Inc.
This file is part of GDB.
#include "gdbsupport/gdb_sys_time.h"
-#include "event-loop.h"
+#include "gdbsupport/event-loop.h"
#include "event-top.h"
#include "inf-loop.h"
#include <signal.h>
#include "serial.h"
-#include "gdbcore.h" /* for exec_bfd */
+#include "gdbcore.h"
#include "remote-fileio.h"
#include "gdb/fileio.h"
#include "gdbsupport/scoped_restore.h"
#include "gdbsupport/environ.h"
#include "gdbsupport/byte-vector.h"
+#include "gdbsupport/search.h"
#include <algorithm>
#include <unordered_map>
+#include "async-event.h"
/* The remote target. */
Specify the serial device it is connected to\n\
(e.g. /dev/ttyS0, /dev/ttya, COM1, etc.).");
+/* See remote.h */
+
+bool remote_debug = false;
+
#define OPAQUETHREADBYTES 8
/* a 64 bit opaque identifier */
void commit_resume () override;
void resume (ptid_t, int, enum gdb_signal) override;
- ptid_t wait (ptid_t, struct target_waitstatus *, int) override;
+ ptid_t wait (ptid_t, struct target_waitstatus *, target_wait_flags) override;
void fetch_registers (struct regcache *, int) override;
void store_registers (struct regcache *, int) override;
const struct btrace_config *btrace_conf (const struct btrace_target_info *) override;
bool augmented_libraries_svr4_read () override;
- int follow_fork (int, int) override;
+ bool follow_fork (bool, bool) override;
void follow_exec (struct inferior *, const char *) override;
int insert_fork_catchpoint (int) override;
int remove_fork_catchpoint (int) override;
ULONGEST offset, int *remote_errno);
int remote_hostio_send_command (int command_bytes, int which_packet,
- int *remote_errno, char **attachment,
+ int *remote_errno, const char **attachment,
int *attachment_len);
int remote_hostio_set_filesystem (struct inferior *inf,
int *remote_errno);
int remote_resume_with_vcont (ptid_t ptid, int step,
gdb_signal siggnal);
- void add_current_inferior_and_thread (char *wait_status);
+ void add_current_inferior_and_thread (const char *wait_status);
ptid_t wait_ns (ptid_t ptid, struct target_waitstatus *status,
- int options);
+ target_wait_flags options);
ptid_t wait_as (ptid_t ptid, target_waitstatus *status,
- int options);
+ target_wait_flags options);
ptid_t process_stop_reply (struct stop_reply *stop_reply,
target_waitstatus *status);
+ ptid_t select_thread_for_ambiguous_stop_reply
+ (const struct target_waitstatus *status);
+
void remote_notice_new_inferior (ptid_t currthread, int executing);
void process_initial_stop_replies (int from_tty);
int try_open_exec);
ptid_t remote_current_thread (ptid_t oldpid);
- ptid_t get_current_thread (char *wait_status);
+ ptid_t get_current_thread (const char *wait_status);
void set_thread (ptid_t ptid, int gen);
void set_general_thread (ptid_t ptid);
char *write_ptid (char *buf, const char *endbuf, ptid_t ptid);
- int remote_unpack_thread_info_response (char *pkt, threadref *expectedref,
+ int remote_unpack_thread_info_response (const char *pkt, threadref *expectedref,
gdb_ext_thread_info *info);
int remote_get_threadinfo (threadref *threadid, int fieldset,
gdb_ext_thread_info *info);
- int parse_threadlist_response (char *pkt, int result_limit,
+ int parse_threadlist_response (const char *pkt, int result_limit,
threadref *original_echo,
threadref *resultlist,
int *doneflag);
static void print_packet (const char *);
-static int stub_unpack_int (char *buff, int fieldlength);
+static int stub_unpack_int (const char *buff, int fieldlength);
struct packet_config;
static bool use_range_stepping = true;
+/* From the remote target's point of view, each thread is in one of these three
+ states. */
+enum class resume_state
+{
+ /* Not resumed - we haven't been asked to resume this thread. */
+ NOT_RESUMED,
+
+ /* We have been asked to resume this thread, but haven't sent a vCont action
+ for it yet. We'll need to consider it next time commit_resume is
+ called. */
+ RESUMED_PENDING_VCONT,
+
+ /* We have been asked to resume this thread, and we have sent a vCont action
+ for it. */
+ RESUMED,
+};
+
+/* Information about a thread's pending vCont-resume. Used when a thread is in
+ the remote_resume_state::RESUMED_PENDING_VCONT state. remote_target::resume
+ stores this information which is then picked up by
+ remote_target::commit_resume to know which is the proper action for this
+ thread to include in the vCont packet. */
+struct resumed_pending_vcont_info
+{
+ /* True if the last resume call for this thread was a step request, false
+ if a continue request. */
+ bool step;
+
+ /* The signal specified in the last resume call for this thread. */
+ gdb_signal sig;
+};
+
/* Private data that we'll store in (struct thread_info)->priv. */
struct remote_thread_info : public private_thread_info
{
to stop for a watchpoint. */
CORE_ADDR watch_data_address = 0;
- /* Fields used by the vCont action coalescing implemented in
- remote_resume / remote_commit_resume. remote_resume stores each
- thread's last resume request in these fields, so that a later
- remote_commit_resume knows which is the proper action for this
- thread to include in the vCont packet. */
+ /* Get the thread's resume state. */
+ enum resume_state get_resume_state () const
+ {
+ return m_resume_state;
+ }
- /* True if the last target_resume call for this thread was a step
- request, false if a continue request. */
- int last_resume_step = 0;
+ /* Put the thread in the NOT_RESUMED state. */
+ void set_not_resumed ()
+ {
+ m_resume_state = resume_state::NOT_RESUMED;
+ }
- /* The signal specified in the last target_resume call for this
- thread. */
- gdb_signal last_resume_sig = GDB_SIGNAL_0;
+ /* Put the thread in the RESUMED_PENDING_VCONT state. */
+ void set_resumed_pending_vcont (bool step, gdb_signal sig)
+ {
+ m_resume_state = resume_state::RESUMED_PENDING_VCONT;
+ m_resumed_pending_vcont_info.step = step;
+ m_resumed_pending_vcont_info.sig = sig;
+ }
+
+ /* Get the information this thread's pending vCont-resumption.
+
+ Must only be called if the thread is in the RESUMED_PENDING_VCONT resume
+ state. */
+ const struct resumed_pending_vcont_info &resumed_pending_vcont_info () const
+ {
+ gdb_assert (m_resume_state == resume_state::RESUMED_PENDING_VCONT);
+
+ return m_resumed_pending_vcont_info;
+ }
+
+ /* Put the thread in the VCONT_RESUMED state. */
+ void set_resumed ()
+ {
+ m_resume_state = resume_state::RESUMED;
+ }
+
+private:
+ /* Resume state for this thread. This is used to implement vCont action
+ coalescing (only when the target operates in non-stop mode).
+
+ remote_target::resume moves the thread to the RESUMED_PENDING_VCONT state,
+ which notes that this thread must be considered in the next commit_resume
+ call.
+
+ remote_target::commit_resume sends a vCont packet with actions for the
+ threads in the RESUMED_PENDING_VCONT state and moves them to the
+ VCONT_RESUMED state.
+
+ When reporting a stop to the core for a thread, that thread is moved back
+ to the NOT_RESUMED state. */
+ enum resume_state m_resume_state = resume_state::NOT_RESUMED;
- /* Whether this thread was already vCont-resumed on the remote
- side. */
- int vcont_resumed = 0;
+ /* Extra info used if the thread is in the RESUMED_PENDING_VCONT state. */
+ struct resumed_pending_vcont_info m_resumed_pending_vcont_info;
};
remote_state::remote_state ()
/* The stub recognized the packet request. */
if (config->support == PACKET_SUPPORT_UNKNOWN)
{
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog,
- "Packet %s (%s) is supported\n",
- config->name, config->title);
+ remote_debug_printf ("Packet %s (%s) is supported",
+ config->name, config->title);
config->support = PACKET_ENABLE;
}
break;
config->name, config->title);
}
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog,
- "Packet %s (%s) is NOT supported\n",
- config->name, config->title);
+ remote_debug_printf ("Packet %s (%s) is NOT supported",
+ config->name, config->title);
config->support = PACKET_DISABLE;
break;
}
else
thread = add_thread (this, ptid);
- get_remote_thread_info (thread)->vcont_resumed = executing;
+ /* We start by assuming threads are resumed. That state then gets updated
+ when we process a matching stop reply. */
+ get_remote_thread_info (thread)->set_resumed ();
+
set_executing (this, ptid, executing);
set_running (this, ptid, running);
thread_change_ptid (this, inferior_ptid, currthread);
else
{
- remote_add_thread (currthread, running, executing);
- inferior_ptid = currthread;
+ thread_info *thr
+ = remote_add_thread (currthread, running, executing);
+ switch_to_thread (thr);
}
return;
}
putpkt (pass_packet);
getpkt (&rs->buf, 0);
packet_ok (rs->buf, &remote_protocol_packets[PACKET_QPassSignals]);
- if (rs->last_pass_packet)
- xfree (rs->last_pass_packet);
+ xfree (rs->last_pass_packet);
rs->last_pass_packet = pass_packet;
}
else
}
}
- if (remote_debug)
- {
- fprintf_unfiltered (gdb_stdlog,
- "remote_set_syscall_catchpoint "
- "pid %d needed %d any_count %d n_sysno %d\n",
- pid, needed, any_count, n_sysno);
- }
+ remote_debug_printf ("pid %d needed %d any_count %d n_sysno %d",
+ pid, needed, any_count, n_sysno);
std::string built_packet;
if (needed)
#define BUF_THREAD_ID_SIZE (OPAQUETHREADBYTES * 2)
-static char *unpack_nibble (char *buf, int *val);
+static const char *unpack_nibble (const char *buf, int *val);
-static char *unpack_byte (char *buf, int *value);
+static const char *unpack_byte (const char *buf, int *value);
static char *pack_int (char *buf, int value);
-static char *unpack_int (char *buf, int *value);
+static const char *unpack_int (const char *buf, int *value);
-static char *unpack_string (char *src, char *dest, int length);
+static const char *unpack_string (const char *src, char *dest, int length);
static char *pack_threadid (char *pkt, threadref *id);
-static char *unpack_threadid (char *inbuf, threadref *id);
+static const char *unpack_threadid (const char *inbuf, threadref *id);
void int_to_threadref (threadref *id, int value);
}
static int
-stub_unpack_int (char *buff, int fieldlength)
+stub_unpack_int (const char *buff, int fieldlength)
{
int nibble;
int retval = 0;
return retval;
}
-static char *
-unpack_nibble (char *buf, int *val)
+static const char *
+unpack_nibble (const char *buf, int *val)
{
*val = fromhex (*buf++);
return buf;
}
-static char *
-unpack_byte (char *buf, int *value)
+static const char *
+unpack_byte (const char *buf, int *value)
{
*value = stub_unpack_int (buf, 2);
return buf + 2;
return buf;
}
-static char *
-unpack_int (char *buf, int *value)
+static const char *
+unpack_int (const char *buf, int *value)
{
*value = stub_unpack_int (buf, 8);
return buf + 8;
}
#endif /* 0 (unused) */
-static char *
-unpack_string (char *src, char *dest, int length)
+static const char *
+unpack_string (const char *src, char *dest, int length)
{
while (length--)
*dest++ = *src++;
}
-static char *
-unpack_threadid (char *inbuf, threadref *id)
+static const char *
+unpack_threadid (const char *inbuf, threadref *id)
{
char *altref;
- char *limit = inbuf + BUF_THREAD_ID_SIZE;
+ const char *limit = inbuf + BUF_THREAD_ID_SIZE;
int x, y;
altref = (char *) id;
the process. */
int
-remote_target::remote_unpack_thread_info_response (char *pkt,
+remote_target::remote_unpack_thread_info_response (const char *pkt,
threadref *expectedref,
gdb_ext_thread_info *info)
{
int mask, length;
int tag;
threadref ref;
- char *limit = pkt + rs->buf.size (); /* Plausible parsing limit. */
+ const char *limit = pkt + rs->buf.size (); /* Plausible parsing limit. */
int retval = 1;
/* info->threadid = 0; FIXME: implement zero_threadref. */
/* Encoding: 'q':8,'M':8,count:16,done:8,argthreadid:64,(threadid:64)* */
int
-remote_target::parse_threadlist_response (char *pkt, int result_limit,
+remote_target::parse_threadlist_response (const char *pkt, int result_limit,
threadref *original_echo,
threadref *resultlist,
int *doneflag)
{
struct remote_state *rs = get_remote_state ();
- char *limit;
int count, resultcount, done;
resultcount = 0;
/* Assume the 'q' and 'M chars have been stripped. */
- limit = pkt + (rs->buf.size () - BUF_THREAD_ID_SIZE);
+ const char *limit = pkt + (rs->buf.size () - BUF_THREAD_ID_SIZE);
/* done parse past here */
pkt = unpack_byte (pkt, &count); /* count field */
pkt = unpack_nibble (pkt, &done);
/* FIXME: This is a good reason to drop the packet. */
/* Possibly, there is a duplicate response. */
/* Possibilities :
- retransmit immediatly - race conditions
- retransmit after timeout - yes
- exit
- wait for packet, then exit
+ retransmit immediatly - race conditions
+ retransmit after timeout - yes
+ exit
+ wait for packet, then exit
*/
warning (_("HMM: threadlist did not echo arg thread, dropping it."));
return 0; /* I choose simply exiting. */
{
auto match_ptid = [&] (const thread_item &item)
{
- return item.ptid == ptid;
+ return item.ptid == ptid;
};
auto it = std::remove_if (this->items.begin (),
ptid_t result;
result = read_ptid (&rs->buf[2], &obuf);
- if (*obuf != '\0' && remote_debug)
- fprintf_unfiltered (gdb_stdlog,
- "warning: garbage in qC reply\n");
+ if (*obuf != '\0')
+ remote_debug_printf ("warning: garbage in qC reply");
return result;
}
return 0;
}
+/* Return true if INF only has one non-exited thread. */
+
+static bool
+has_single_non_exited_thread (inferior *inf)
+{
+ int count = 0;
+ for (thread_info *tp ATTRIBUTE_UNUSED : inf->non_exited_threads ())
+ if (++count > 1)
+ break;
+ return count == 1;
+}
+
/* Implement the to_update_thread_list function for the remote
targets. */
if (!context.contains_thread (tp->ptid))
{
+ /* Do not remove the thread if it is the last thread in
+ the inferior. This situation happens when we have a
+ pending exit process status to process. Otherwise we
+ may end up with a seemingly live inferior (i.e. pid
+ != 0) that has no threads. */
+ if (has_single_non_exited_thread (tp->inf))
+ continue;
+
/* Not found. */
delete_thread (tp);
}
char *ptr;
int lose, num_segments = 0, do_sections, do_segments;
CORE_ADDR text_addr, data_addr, bss_addr, segments[2];
- struct symfile_segment_data *data;
- if (symfile_objfile == NULL)
+ if (current_program_space->symfile_object_file == NULL)
return;
putpkt ("qOffsets");
else if (*ptr != '\0')
warning (_("Target reported unsupported offsets: %s"), buf);
- section_offsets offs = symfile_objfile->section_offsets;
+ objfile *objf = current_program_space->symfile_object_file;
+ section_offsets offs = objf->section_offsets;
- data = get_symfile_segment_data (symfile_objfile->obfd);
+ symfile_segment_data_up data = get_symfile_segment_data (objf->obfd);
do_segments = (data != NULL);
do_sections = num_segments == 0;
by assuming that the .text and .data offsets apply to the whole
text and data segments. Convert the offsets given in the packet
to base addresses for symfile_map_offsets_to_segments. */
- else if (data && data->num_segments == 2)
+ else if (data != nullptr && data->segments.size () == 2)
{
- segments[0] = data->segment_bases[0] + text_addr;
- segments[1] = data->segment_bases[1] + data_addr;
+ segments[0] = data->segments[0].base + text_addr;
+ segments[1] = data->segments[1].base + data_addr;
num_segments = 2;
}
/* If the object file has only one segment, assume that it is text
but programs with no code are useless. Of course the code might
have ended up in the data segment... to detect that we would need
the permissions here. */
- else if (data && data->num_segments == 1)
+ else if (data && data->segments.size () == 1)
{
- segments[0] = data->segment_bases[0] + text_addr;
+ segments[0] = data->segments[0].base + text_addr;
num_segments = 1;
}
/* There's no way to relocate by segment. */
if (do_segments)
{
- int ret = symfile_map_offsets_to_segments (symfile_objfile->obfd, data,
- offs, num_segments, segments);
+ int ret = symfile_map_offsets_to_segments (objf->obfd,
+ data.get (), offs,
+ num_segments, segments);
if (ret == 0 && !do_sections)
error (_("Can not handle qOffsets TextSeg "
do_sections = 0;
}
- if (data)
- free_symfile_segment_data (data);
-
if (do_sections)
{
- offs[SECT_OFF_TEXT (symfile_objfile)] = text_addr;
+ offs[SECT_OFF_TEXT (objf)] = text_addr;
/* This is a temporary kludge to force data and bss to use the
same offsets because that's what nlmconv does now. The real
solution requires changes to the stub and remote.c that I
don't have time to do right now. */
- offs[SECT_OFF_DATA (symfile_objfile)] = data_addr;
- offs[SECT_OFF_BSS (symfile_objfile)] = data_addr;
+ offs[SECT_OFF_DATA (objf)] = data_addr;
+ offs[SECT_OFF_BSS (objf)] = data_addr;
}
- objfile_relocate (symfile_objfile, offs);
+ objfile_relocate (objf, offs);
}
/* Send interrupt_sequence to remote target. */
and extract the PTID. Returns NULL_PTID if not found. */
static ptid_t
-stop_reply_extract_thread (char *stop_reply)
+stop_reply_extract_thread (const char *stop_reply)
{
if (stop_reply[0] == 'T' && strlen (stop_reply) > 3)
{
method avoids a roundtrip. */
ptid_t
-remote_target::get_current_thread (char *wait_status)
+remote_target::get_current_thread (const char *wait_status)
{
ptid_t ptid = null_ptid;
in in WAIT_STATUS, which may be NULL. */
void
-remote_target::add_current_inferior_and_thread (char *wait_status)
+remote_target::add_current_inferior_and_thread (const char *wait_status)
{
struct remote_state *rs = get_remote_state ();
bool fake_pid_p = false;
- inferior_ptid = null_ptid;
+ switch_to_no_thread ();
- /* Now, if we have thread information, update inferior_ptid. */
+ /* Now, if we have thread information, update the current thread's
+ ptid. */
ptid_t curr_ptid = get_current_thread (wait_status);
if (curr_ptid != null_ptid)
case TARGET_WAITKIND_SIGNALLED:
case TARGET_WAITKIND_EXITED:
/* We shouldn't see these, but if we do, just ignore. */
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "remote: event ignored\n");
+ remote_debug_printf ("event ignored");
ignore_event = 1;
break;
|| ws.value.sig != GDB_SIGNAL_0)
evthread->suspend.waitstatus_pending_p = 1;
- set_executing (this, event_ptid, 0);
- set_running (this, event_ptid, 0);
- get_remote_thread_info (evthread)->vcont_resumed = 0;
+ set_executing (this, event_ptid, false);
+ set_running (this, event_ptid, false);
+ get_remote_thread_info (evthread)->set_not_resumed ();
}
/* "Notice" the new inferiors before anything related to
void
remote_target::start_remote (int from_tty, int extended_p)
{
+ REMOTE_SCOPED_DEBUG_ENTER_EXIT;
+
struct remote_state *rs = get_remote_state ();
struct packet_config *noack_config;
- char *wait_status = NULL;
/* Signal other parts that we're going through the initial setup,
and so things may not be stable yet. E.g., we don't try to
if (!target_is_non_stop_p ())
{
+ char *wait_status = NULL;
+
if (rs->buf[0] == 'W' || rs->buf[0] == 'X')
{
if (!extended_p)
tell us which thread was current (no "thread"
register in T stop reply?). Just pick the first
thread in the thread list then. */
-
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog,
- "warning: couldn't determine remote "
- "current thread; picking first in list.\n");
+
+ remote_debug_printf ("warning: couldn't determine remote "
+ "current thread; picking first in list.");
for (thread_info *tp : all_non_exited_threads (this,
minus_one_ptid))
return;
}
- /* In non-stop mode, any cached wait status will be stored in
- the stop reply queue. */
- gdb_assert (wait_status == NULL);
-
/* Report all signals during attach/startup. */
pass_signals ({});
}
/* If we connected to a live target, do some additional setup. */
- if (target_has_execution)
+ if (target_has_execution ())
{
- if (symfile_objfile) /* No use without a symbol-file. */
+ /* No use without a symbol-file. */
+ if (current_program_space->symfile_object_file)
remote_check_symbols ();
}
but our current inferior is not running, we should not invite the
remote target to request symbol lookups related to its
(unrelated) current process. */
- if (!target_has_execution)
+ if (!target_has_execution ())
return;
if (packet_support (PACKET_qSymbol) == PACKET_DISABLE)
/* If we're connected to a running target, target_preopen will kill it.
Ask this question first, before target_preopen has a chance to kill
anything. */
- if (curr_remote != NULL && !target_has_execution)
+ if (curr_remote != NULL && !target_has_execution ())
{
if (from_tty
&& !query (_("Already connected to a remote target. Disconnect? ")))
/* Register extra event sources in the event loop. */
rs->remote_async_inferior_event_token
- = create_async_event_handler (remote_async_inferior_event_handler,
- remote);
+ = create_async_event_handler (remote_async_inferior_event_handler, remote,
+ "remote");
rs->notif_state = remote_notif_state_allocate (remote);
/* Reset the target state; these things will be queried either by
struct remote_state *rs = get_remote_state ();
int is_fork_parent;
- if (!target_has_execution)
+ if (!target_has_execution ())
error (_("No process to detach from."));
target_announce_detach (from_tty);
}
else
{
- inferior_ptid = null_ptid;
+ switch_to_no_thread ();
detach_inferior (current_inferior ());
}
}
it is named remote_follow_fork in anticipation of using it for the
remote target as well. */
-int
-remote_target::follow_fork (int follow_child, int detach_fork)
+bool
+remote_target::follow_fork (bool follow_child, bool detach_fork)
{
struct remote_state *rs = get_remote_state ();
enum target_waitkind kind = inferior_thread ()->pending_follow.kind;
remote_detach_pid (child_pid);
}
}
- return 0;
+
+ return false;
}
/* Target follow-exec function for remote targets. Save EXECD_PATHNAME
target_pid_to_str (ptid_t (pid)).c_str ());
}
- set_current_inferior (remote_add_inferior (false, pid, 1, 0));
+ switch_to_inferior_no_thread (remote_add_inferior (false, pid, 1, 0));
inferior_ptid = ptid_t (pid);
if (target_is_non_stop_p ())
{
- struct thread_info *thread;
-
/* Get list of threads. */
update_thread_list ();
- thread = first_thread_of_inferior (current_inferior ());
- if (thread)
- inferior_ptid = thread->ptid;
- else
- inferior_ptid = ptid_t (pid);
+ thread_info *thread = first_thread_of_inferior (current_inferior ());
+ if (thread != nullptr)
+ switch_to_thread (thread);
/* Invalidate our notion of the remote current thread. */
record_currthread (rs, minus_one_ptid);
}
else
{
- /* Now, if we have thread information, update inferior_ptid. */
- inferior_ptid = remote_current_thread (inferior_ptid);
+ /* Now, if we have thread information, update the main thread's
+ ptid. */
+ ptid_t curr_ptid = remote_current_thread (ptid_t (pid));
/* Add the main thread to the thread list. */
- thread_info *thr = add_thread_silent (this, inferior_ptid);
+ thread_info *thr = add_thread_silent (this, curr_ptid);
+
+ switch_to_thread (thr);
+
/* Don't consider the thread stopped until we've processed the
saved stop reply. */
set_executing (this, thr->ptid, true);
}
}
else
- gdb_assert (wait_status == NULL);
+ {
+ gdb_assert (wait_status == NULL);
+
+ gdb_assert (target_can_async_p ());
+ target_async (1);
+ }
}
/* Implementation of the to_post_attach method. */
binary is not using shared libraries, the vsyscall page is not
present (on Linux) and the binary itself hadn't changed since the
debugging process was started. */
- if (symfile_objfile != NULL)
+ if (current_program_space->symfile_object_file != NULL)
remote_check_symbols();
}
individually. Resuming remote threads directly in target_resume
would thus result in sending one packet per thread. Instead, to
minimize roundtrip latency, here we just store the resume
- request; the actual remote resumption will be done in
- target_commit_resume / remote_commit_resume, where we'll be able
- to do vCont action coalescing. */
+ request (put the thread in RESUMED_PENDING_VCONT state); the actual remote
+ resumption will be done in remote_target::commit_resume, where we'll be
+ able to do vCont action coalescing. */
if (target_is_non_stop_p () && ::execution_direction != EXEC_REVERSE)
{
remote_thread_info *remote_thr;
else
remote_thr = get_remote_thread_info (this, ptid);
- remote_thr->last_resume_step = step;
- remote_thr->last_resume_sig = siggnal;
+ /* We don't expect the core to ask to resume an already resumed (from
+ its point of view) thread. */
+ gdb_assert (remote_thr->get_resume_state () == resume_state::NOT_RESUMED);
+
+ remote_thr->set_resumed_pending_vcont (step, siggnal);
return;
}
if (!remote_resume_with_vcont (ptid, step, siggnal))
remote_resume_with_hc (ptid, step, siggnal);
+ /* Update resumed state tracked by the remote target. */
+ for (thread_info *tp : all_non_exited_threads (this, ptid))
+ get_remote_thread_info (tp)->set_resumed ();
+
/* We are about to start executing the inferior, let's register it
with the event loop. NOTE: this is the one place where all the
execution commands end up. We could alternatively do this in each
for (thread_info *tp : all_non_exited_threads (this))
{
+ remote_thread_info *priv = get_remote_thread_info (tp);
+
/* If a thread of a process is not meant to be resumed, then we
can't wildcard that process. */
- if (!tp->executing)
+ if (priv->get_resume_state () == resume_state::NOT_RESUMED)
{
get_remote_inferior (tp->inf)->may_wildcard_vcont = false;
{
remote_thread_info *remote_thr = get_remote_thread_info (tp);
- if (!tp->executing || remote_thr->vcont_resumed)
+ /* If the thread was previously vCont-resumed, no need to send a specific
+ action for it. If we didn't receive a resume request for it, don't
+ send an action for it either. */
+ if (remote_thr->get_resume_state () != resume_state::RESUMED_PENDING_VCONT)
continue;
gdb_assert (!thread_is_in_step_over_chain (tp));
- if (!remote_thr->last_resume_step
- && remote_thr->last_resume_sig == GDB_SIGNAL_0
- && get_remote_inferior (tp->inf)->may_wildcard_vcont)
- {
- /* We'll send a wildcard resume instead. */
- remote_thr->vcont_resumed = 1;
- continue;
- }
+ const resumed_pending_vcont_info &info
+ = remote_thr->resumed_pending_vcont_info ();
+
+ /* Check if we need to send a specific action for this thread. If not,
+ it will be included in a wildcard resume instead. */
+ if (info.step || info.sig != GDB_SIGNAL_0
+ || !get_remote_inferior (tp->inf)->may_wildcard_vcont)
+ vcont_builder.push_action (tp->ptid, info.step, info.sig);
- vcont_builder.push_action (tp->ptid,
- remote_thr->last_resume_step,
- remote_thr->last_resume_sig);
- remote_thr->vcont_resumed = 1;
+ remote_thr->set_resumed ();
}
/* Now check whether we can send any process-wide wildcard. This is
void
remote_target::stop (ptid_t ptid)
{
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "remote_stop called\n");
+ REMOTE_SCOPED_DEBUG_ENTER_EXIT;
if (target_is_non_stop_p ())
remote_stop_ns (ptid);
void
remote_target::interrupt ()
{
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "remote_interrupt called\n");
+ REMOTE_SCOPED_DEBUG_ENTER_EXIT;
if (target_is_non_stop_p ())
remote_interrupt_ns ();
void
remote_target::pass_ctrlc ()
{
- struct remote_state *rs = get_remote_state ();
+ REMOTE_SCOPED_DEBUG_ENTER_EXIT;
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "remote_pass_ctrlc called\n");
+ struct remote_state *rs = get_remote_state ();
/* If we're starting up, we're not fully synced yet. Quit
immediately. */
tb[0] = c;
tb[1] = 0;
- fputs_unfiltered (tb, gdb_stdtarg);
+ gdb_stdtarg->puts (tb);
}
- gdb_flush (gdb_stdtarg);
+ gdb_stdtarg->flush ();
}
struct stop_reply : public notif_event
reported expedited registers. */
if (event->ptid == null_ptid)
{
+ /* If there is no thread-id information then leave
+ the event->ptid as null_ptid. Later in
+ process_stop_reply we will pick a suitable
+ thread. */
const char *thr = strstr (p1 + 1, ";thread:");
if (thr != NULL)
event->ptid = read_ptid (thr + strlen (";thread:"),
NULL);
- else
- {
- /* Either the current thread hasn't changed,
- or the inferior is not multi-threaded.
- The event must be for the thread we last
- set as (or learned as being) current. */
- event->ptid = event->rs->general_thread;
- }
}
if (rsa == NULL)
event->ptid = minus_one_ptid;
break;
}
-
- if (target_is_non_stop_p () && event->ptid == null_ptid)
- error (_("No process or thread specified in stop reply: %s"), buf);
}
/* When the stub wants to tell GDB about a new notification reply, it
remote->remote_notif_get_pending_events (nc);
}
+/* Called from process_stop_reply when the stop packet we are responding
+ to didn't include a process-id or thread-id. STATUS is the stop event
+ we are responding to.
+
+ It is the task of this function to select a suitable thread (or process)
+ and return its ptid, this is the thread (or process) we will assume the
+ stop event came from.
+
+ In some cases there isn't really any choice about which thread (or
+ process) is selected, a basic remote with a single process containing a
+ single thread might choose not to send any process-id or thread-id in
+ its stop packets, this function will select and return the one and only
+ thread.
+
+ However, if a target supports multiple threads (or processes) and still
+ doesn't include a thread-id (or process-id) in its stop packet then
+ first, this is a badly behaving target, and second, we're going to have
+ to select a thread (or process) at random and use that. This function
+ will print a warning to the user if it detects that there is the
+ possibility that GDB is guessing which thread (or process) to
+ report.
+
+ Note that this is called before GDB fetches the updated thread list from the
+ target. So it's possible for the stop reply to be ambiguous and for GDB to
+ not realize it. For example, if there's initially one thread, the target
+ spawns a second thread, and then sends a stop reply without an id that
+ concerns the first thread. GDB will assume the stop reply is about the
+ first thread - the only thread it knows about - without printing a warning.
+ Anyway, if the remote meant for the stop reply to be about the second thread,
+ then it would be really broken, because GDB doesn't know about that thread
+ yet. */
+
+ptid_t
+remote_target::select_thread_for_ambiguous_stop_reply
+ (const struct target_waitstatus *status)
+{
+ /* Some stop events apply to all threads in an inferior, while others
+ only apply to a single thread. */
+ bool process_wide_stop
+ = (status->kind == TARGET_WAITKIND_EXITED
+ || status->kind == TARGET_WAITKIND_SIGNALLED);
+
+ thread_info *first_resumed_thread = nullptr;
+ bool ambiguous = false;
+
+ /* Consider all non-exited threads of the target, find the first resumed
+ one. */
+ for (thread_info *thr : all_non_exited_threads (this))
+ {
+ remote_thread_info *remote_thr = get_remote_thread_info (thr);
+
+ if (remote_thr->get_resume_state () != resume_state::RESUMED)
+ continue;
+
+ if (first_resumed_thread == nullptr)
+ first_resumed_thread = thr;
+ else if (!process_wide_stop
+ || first_resumed_thread->ptid.pid () != thr->ptid.pid ())
+ ambiguous = true;
+ }
+
+ gdb_assert (first_resumed_thread != nullptr);
+
+ /* Warn if the remote target is sending ambiguous stop replies. */
+ if (ambiguous)
+ {
+ static bool warned = false;
+
+ if (!warned)
+ {
+ /* If you are seeing this warning then the remote target has
+ stopped without specifying a thread-id, but the target
+ does have multiple threads (or inferiors), and so GDB is
+ having to guess which thread stopped.
+
+ Examples of what might cause this are the target sending
+ and 'S' stop packet, or a 'T' stop packet and not
+ including a thread-id.
+
+ Additionally, the target might send a 'W' or 'X packet
+ without including a process-id, when the target has
+ multiple running inferiors. */
+ if (process_wide_stop)
+ warning (_("multi-inferior target stopped without "
+ "sending a process-id, using first "
+ "non-exited inferior"));
+ else
+ warning (_("multi-threaded target stopped without "
+ "sending a thread-id, using first "
+ "non-exited thread"));
+ warned = true;
+ }
+ }
+
+ /* If this is a stop for all threads then don't use a particular threads
+ ptid, instead create a new ptid where only the pid field is set. */
+ if (process_wide_stop)
+ return ptid_t (first_resumed_thread->ptid.pid ());
+ else
+ return first_resumed_thread->ptid;
+}
+
/* Called when it is decided that STOP_REPLY holds the info of the
event that is to be returned to the core. This function always
destroys STOP_REPLY. */
remote_target::process_stop_reply (struct stop_reply *stop_reply,
struct target_waitstatus *status)
{
- ptid_t ptid;
-
*status = stop_reply->ws;
- ptid = stop_reply->ptid;
+ ptid_t ptid = stop_reply->ptid;
- /* If no thread/process was reported by the stub, assume the current
- inferior. */
+ /* If no thread/process was reported by the stub then select a suitable
+ thread/process. */
if (ptid == null_ptid)
- ptid = inferior_ptid;
+ ptid = select_thread_for_ambiguous_stop_reply (status);
+ gdb_assert (ptid != null_ptid);
if (status->kind != TARGET_WAITKIND_EXITED
&& status->kind != TARGET_WAITKIND_SIGNALLED
remote_thr->core = stop_reply->core;
remote_thr->stop_reason = stop_reply->stop_reason;
remote_thr->watch_data_address = stop_reply->watch_data_address;
- remote_thr->vcont_resumed = 0;
+
+ if (target_is_non_stop_p ())
+ {
+ /* If the target works in non-stop mode, a stop-reply indicates that
+ only this thread stopped. */
+ remote_thr->set_not_resumed ();
+ }
+ else
+ {
+ /* If the target works in all-stop mode, a stop-reply indicates that
+ all the target's threads stopped. */
+ for (thread_info *tp : all_non_exited_threads (this))
+ get_remote_thread_info (tp)->set_not_resumed ();
+ }
}
delete stop_reply;
/* The non-stop mode version of target_wait. */
ptid_t
-remote_target::wait_ns (ptid_t ptid, struct target_waitstatus *status, int options)
+remote_target::wait_ns (ptid_t ptid, struct target_waitstatus *status,
+ target_wait_flags options)
{
struct remote_state *rs = get_remote_state ();
struct stop_reply *stop_reply;
STATUS just as `wait' would. */
ptid_t
-remote_target::wait_as (ptid_t ptid, target_waitstatus *status, int options)
+remote_target::wait_as (ptid_t ptid, target_waitstatus *status,
+ target_wait_flags options)
{
struct remote_state *rs = get_remote_state ();
ptid_t event_ptid = null_ptid;
STATUS just as `wait' would. */
ptid_t
-remote_target::wait (ptid_t ptid, struct target_waitstatus *status, int options)
+remote_target::wait (ptid_t ptid, struct target_waitstatus *status,
+ target_wait_flags options)
{
+ REMOTE_SCOPED_DEBUG_ENTER_EXIT;
+
ptid_t event_ptid;
if (target_is_non_stop_p ())
getpkt (&rs->buf, 0);
if (packet_check_result (rs->buf) == PACKET_ERROR)
error (_("Could not read registers; remote failure reply '%s'"),
- rs->buf.data ());
+ rs->buf.data ());
/* We can get out of synch in various cases. If the first character
in the buffer is not a hex character, assume that has happened
&& (rs->buf[0] < 'a' || rs->buf[0] > 'f')
&& rs->buf[0] != 'x') /* New: unavailable register value. */
{
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog,
- "Bad register packet; fetching a new packet\n");
+ remote_debug_printf ("Bad register packet; fetching a new packet");
getpkt (&rs->buf, 0);
}
}
/* Looks valid enough, we can assume this is the correct length
- for a 'g' packet. It's important not to adjust
- rsa->sizeof_g_packet if we have truncated registers otherwise
- this "if" won't be run the next time the method is called
- with a packet of the same size and one of the internal errors
- below will trigger instead. */
+ for a 'g' packet. It's important not to adjust
+ rsa->sizeof_g_packet if we have truncated registers otherwise
+ this "if" won't be run the next time the method is called
+ with a packet of the same size and one of the internal errors
+ below will trigger instead. */
rsa->sizeof_g_packet = sizeof_g_packet;
}
&& address_size < (sizeof (ULONGEST) * 8))
{
/* Only create a mask when that mask can safely be constructed
- in a ULONGEST variable. */
+ in a ULONGEST variable. */
ULONGEST mask = 1;
mask = (mask << address_size) - 1;
if (rs->buf[0] == '\0')
{
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog,
- "binary downloading NOT "
- "supported by target\n");
+ remote_debug_printf ("binary downloading NOT supported by target");
remote_protocol_packets[PACKET_X].support = PACKET_DISABLE;
}
else
{
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog,
- "binary downloading supported by target\n");
+ remote_debug_printf ("binary downloading supported by target");
remote_protocol_packets[PACKET_X].support = PACKET_ENABLE;
}
break;
*p++ = ',';
/* Append the length and retain its location and size. It may need to be
- adjusted once the packet body has been created. */
+ adjusted once the packet body has been created. */
plen = p;
plenlen = hexnumstr (p, (ULONGEST) todo_units);
p += plenlen;
ULONGEST *xfered_len)
{
struct target_section *secp;
- struct target_section_table *table;
secp = target_section_by_addr (this, memaddr);
if (secp != NULL
&& (bfd_section_flags (secp->the_bfd_section) & SEC_READONLY))
{
- struct target_section *p;
ULONGEST memend = memaddr + len;
- table = target_get_section_table (this);
-
- for (p = table->sections; p < table->sections_end; p++)
+ target_section_table *table = target_get_section_table (this);
+ for (target_section &p : *table)
{
- if (memaddr >= p->addr)
+ if (memaddr >= p.addr)
{
- if (memend <= p->endaddr)
+ if (memend <= p.endaddr)
{
/* Entire transfer is within this section. */
return remote_read_bytes_1 (memaddr, readbuf, len, unit_size,
xfered_len);
}
- else if (memaddr >= p->endaddr)
+ else if (memaddr >= p.endaddr)
{
/* This section ends before the transfer starts. */
continue;
else
{
/* This section overlaps the transfer. Just do half. */
- len = p->endaddr - memaddr;
+ len = p.endaddr - memaddr;
return remote_read_bytes_1 (memaddr, readbuf, len, unit_size,
xfered_len);
}
while (1)
{
- int started_error_output = 0;
-
if (remote_debug)
{
*p = '\0';
std::string str
= escape_buffer (buf2, std::min (len, max_chars));
- fprintf_unfiltered (gdb_stdlog, "Sending packet: %s", str.c_str ());
-
if (len > max_chars)
- fprintf_unfiltered (gdb_stdlog, "[%d bytes omitted]",
- len - max_chars);
-
- fprintf_unfiltered (gdb_stdlog, "...");
-
- gdb_flush (gdb_stdlog);
+ remote_debug_printf_nofunc
+ ("Sending packet: %s [%d bytes omitted]", str.c_str (),
+ len - max_chars);
+ else
+ remote_debug_printf_nofunc ("Sending packet: %s", str.c_str ());
}
remote_serial_write (buf2, p - buf2);
/* If this is a no acks version of the remote protocol, send the
packet and move on. */
if (rs->noack_mode)
- break;
+ break;
/* Read until either a timeout occurs (-2) or '+' is read.
Handle any notification that arrives in the mean time. */
{
ch = readchar (remote_timeout);
- if (remote_debug)
- {
- switch (ch)
- {
- case '+':
- case '-':
- case SERIAL_TIMEOUT:
- case '$':
- case '%':
- if (started_error_output)
- {
- putchar_unfiltered ('\n');
- started_error_output = 0;
- }
- }
- }
-
switch (ch)
{
case '+':
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "Ack\n");
+ remote_debug_printf_nofunc ("Received Ack");
return 1;
case '-':
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "Nak\n");
+ remote_debug_printf_nofunc ("Received Nak");
/* FALLTHROUGH */
case SERIAL_TIMEOUT:
tcount++;
break; /* Retransmit buffer. */
case '$':
{
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog,
- "Packet instead of Ack, ignoring it\n");
+ remote_debug_printf ("Packet instead of Ack, ignoring it");
/* It's probably an old response sent because an ACK
was lost. Gobble up the packet and ack it so it
doesn't get retransmitted when we resend this
val = read_frame (&rs->buf);
if (val >= 0)
{
- if (remote_debug)
- {
- std::string str = escape_buffer (rs->buf.data (), val);
+ remote_debug_printf_nofunc
+ (" Notification received: %s",
+ escape_buffer (rs->buf.data (), val).c_str ());
- fprintf_unfiltered (gdb_stdlog,
- " Notification received: %s\n",
- str.c_str ());
- }
handle_notification (rs->notif_state, rs->buf.data ());
/* We're in sync now, rewait for the ack. */
tcount = 0;
}
else
- {
- if (remote_debug)
- {
- if (!started_error_output)
- {
- started_error_output = 1;
- fprintf_unfiltered (gdb_stdlog, "putpkt: Junk: ");
- }
- fputc_unfiltered (ch & 0177, gdb_stdlog);
- fprintf_unfiltered (gdb_stdlog, "%s", rs->buf.data ());
- }
- }
+ remote_debug_printf_nofunc ("Junk: %c%s", ch & 0177,
+ rs->buf.data ());
continue;
}
/* fall-through */
default:
- if (remote_debug)
- {
- if (!started_error_output)
- {
- started_error_output = 1;
- fprintf_unfiltered (gdb_stdlog, "putpkt: Junk: ");
- }
- fputc_unfiltered (ch & 0177, gdb_stdlog);
- }
+ remote_debug_printf_nofunc ("Junk: %c%s", ch & 0177,
+ rs->buf.data ());
continue;
}
break; /* Here to retransmit. */
#if 0
/* This is wrong. If doing a long backtrace, the user should be
- able to get out next time we call QUIT, without anything as
- violent as interrupt_query. If we want to provide a way out of
- here without getting to the next QUIT, it should be based on
- hitting ^C twice as in remote_wait. */
+ able to get out next time we call QUIT, without anything as
+ violent as interrupt_query. If we want to provide a way out of
+ here without getting to the next QUIT, it should be based on
+ hitting ^C twice as in remote_wait. */
if (quit_flag)
{
quit_flag = 0;
switch (c)
{
case SERIAL_TIMEOUT:
- if (remote_debug)
- fputs_filtered ("Timeout in mid-packet, retrying\n", gdb_stdlog);
+ remote_debug_printf ("Timeout in mid-packet, retrying");
return -1;
+
case '$':
- if (remote_debug)
- fputs_filtered ("Saw new packet start in middle of old one\n",
- gdb_stdlog);
+ remote_debug_printf ("Saw new packet start in middle of old one");
return -1; /* Start a new packet, count retries. */
+
case '#':
{
unsigned char pktcsum;
if (check_0 == SERIAL_TIMEOUT || check_1 == SERIAL_TIMEOUT)
{
- if (remote_debug)
- fputs_filtered ("Timeout in checksum, retrying\n",
- gdb_stdlog);
+ remote_debug_printf ("Timeout in checksum, retrying");
return -1;
}
else if (check_0 < 0 || check_1 < 0)
{
- if (remote_debug)
- fputs_filtered ("Communication error in checksum\n",
- gdb_stdlog);
+ remote_debug_printf ("Communication error in checksum");
return -1;
}
pktcsum = (fromhex (check_0) << 4) | fromhex (check_1);
if (csum == pktcsum)
- return bc;
+ return bc;
- if (remote_debug)
- {
- std::string str = escape_buffer (buf, bc);
+ remote_debug_printf
+ ("Bad checksum, sentsum=0x%x, csum=0x%x, buf=%s",
+ pktcsum, csum, escape_buffer (buf, bc).c_str ());
- fprintf_unfiltered (gdb_stdlog,
- "Bad checksum, sentsum=0x%x, "
- "csum=0x%x, buf=%s\n",
- pktcsum, csum, str.c_str ());
- }
/* Number of characters in buffer ignoring trailing
- NULL. */
+ NULL. */
return -1;
}
case '*': /* Run length encoding. */
- {
+ {
int repeat;
csum += c;
_("Watchdog timeout has expired. "
"Target detached."));
}
- if (remote_debug)
- fputs_filtered ("Timed out.\n", gdb_stdlog);
+
+ remote_debug_printf ("Timed out.");
}
else
{
= escape_buffer (buf->data (),
std::min (val, max_chars));
- fprintf_unfiltered (gdb_stdlog, "Packet received: %s",
- str.c_str ());
-
if (val > max_chars)
- fprintf_unfiltered (gdb_stdlog, "[%d bytes omitted]",
- val - max_chars);
-
- fprintf_unfiltered (gdb_stdlog, "\n");
+ remote_debug_printf_nofunc
+ ("Packet received: %s [%d bytes omitted]", str.c_str (),
+ val - max_chars);
+ else
+ remote_debug_printf_nofunc ("Packet received: %s",
+ str.c_str ());
}
/* Skip the ack char if we're in no-ack mode. */
{
gdb_assert (c == '%');
- if (remote_debug)
- {
- std::string str = escape_buffer (buf->data (), val);
+ remote_debug_printf_nofunc
+ (" Notification received: %s",
+ escape_buffer (buf->data (), val).c_str ());
- fprintf_unfiltered (gdb_stdlog,
- " Notification received: %s\n",
- str.c_str ());
- }
if (is_notif != NULL)
*is_notif = 1;
{
case PACKET_ERROR:
if (rs->buf[1] == '.')
- {
- message = strchr (&rs->buf[2], '.');
- if (message)
- error (_("Remote failure reply: %s"), message + 1);
- }
+ {
+ message = strchr (&rs->buf[2], '.');
+ if (message)
+ error (_("Remote failure reply: %s"), message + 1);
+ }
return -1;
case PACKET_UNKNOWN:
return -1;
/* It doesn't make sense to use qCRC if the remote target is
connected but not running. */
- if (target_has_execution && packet_support (PACKET_qCRC) != PACKET_DISABLE)
+ if (target_has_execution ()
+ && packet_support (PACKET_qCRC) != PACKET_DISABLE)
{
enum packet_result result;
int res;
int read_only = 0;
- if (!exec_bfd)
+ if (!current_program_space->exec_bfd ())
error (_("command cannot be used without an exec file"));
if (args != NULL && strcmp (args, "-r") == 0)
args = NULL;
}
- for (s = exec_bfd->sections; s; s = s->next)
+ for (s = current_program_space->exec_bfd ()->sections; s; s = s->next)
{
if (!(s->flags & SEC_LOAD))
continue; /* Skip non-loadable section. */
lma = s->lma;
gdb::byte_vector sectdata (size);
- bfd_get_section_contents (exec_bfd, s, sectdata.data (), 0, size);
+ bfd_get_section_contents (current_program_space->exec_bfd (), s,
+ sectdata.data (), 0, size);
res = target_verify_memory (sectdata.data (), lma, size);
/* If the remote target is connected but not running, we should
pass this request down to a lower stratum (e.g. the executable
file). */
- if (!target_has_execution)
+ if (!target_has_execution ())
return TARGET_XFER_EOF;
if (writebuf != NULL)
gdb_assert (rs->remote_desc);
return remote_read_qxfer
("osdata", annex, readbuf, offset, len, xfered_len,
- &remote_protocol_packets[PACKET_qXfer_osdata]);
+ &remote_protocol_packets[PACKET_qXfer_osdata]);
case TARGET_OBJECT_THREADS:
gdb_assert (annex == NULL);
case TARGET_OBJECT_BTRACE:
return remote_read_qxfer ("btrace", annex, readbuf, offset, len,
xfered_len,
- &remote_protocol_packets[PACKET_qXfer_btrace]);
+ &remote_protocol_packets[PACKET_qXfer_btrace]);
case TARGET_OBJECT_BTRACE_CONF:
return remote_read_qxfer ("btrace-conf", annex, readbuf, offset,
int found;
ULONGEST found_addr;
+ auto read_memory = [=] (CORE_ADDR addr, gdb_byte *result, size_t len)
+ {
+ return (target_read (this, TARGET_OBJECT_MEMORY, NULL, result, addr, len)
+ == len);
+ };
+
/* Don't go to the target if we don't have to. This is done before
checking packet_config_support to avoid the possibility that a
success for this edge case means the facility works in
{
/* Target doesn't provided special support, fall back and use the
standard support (copy memory and do the search here). */
- return simple_search_memory (this, start_addr, search_space_len,
+ return simple_search_memory (read_memory, start_addr, search_space_len,
pattern, pattern_len, found_addrp);
}
supported. If so, fall back to the simple way. */
if (packet_config_support (packet) == PACKET_DISABLE)
{
- return simple_search_memory (this, start_addr, search_space_len,
+ return simple_search_memory (read_memory, start_addr, search_space_len,
pattern, pattern_len, found_addrp);
}
return -1;
QUIT; /* Allow user to bail out with ^C. */
rs->buf[0] = '\0';
if (getpkt_sane (&rs->buf, 0) == -1)
- {
- /* Timeout. Continue to (try to) read responses.
- This is better than stopping with an error, assuming the stub
- is still executing the (long) monitor command.
- If needed, the user can interrupt gdb using C-c, obtaining
- an effect similar to stop on timeout. */
- continue;
- }
+ {
+ /* Timeout. Continue to (try to) read responses.
+ This is better than stopping with an error, assuming the stub
+ is still executing the (long) monitor command.
+ If needed, the user can interrupt gdb using C-c, obtaining
+ an effect similar to stop on timeout. */
+ continue;
+ }
buf = rs->buf.data ();
if (buf[0] == '\0')
error (_("Target does not support this command."));
/* Do not try this during initial connection, when we do not know
whether there is a running but stopped thread. */
- if (!target_has_execution || inferior_ptid == null_ptid)
+ if (!target_has_execution () || inferior_ptid == null_ptid)
return beneath ()->read_description ();
if (!data->guesses.empty ())
-1 is returned, the other variables may not be initialized. */
static int
-remote_hostio_parse_result (char *buffer, int *retcode,
- int *remote_errno, char **attachment)
+remote_hostio_parse_result (const char *buffer, int *retcode,
+ int *remote_errno, const char **attachment)
{
char *p, *p2;
int
remote_target::remote_hostio_send_command (int command_bytes, int which_packet,
- int *remote_errno, char **attachment,
+ int *remote_errno, const char **attachment,
int *attachment_len)
{
struct remote_state *rs = get_remote_state ();
int ret, bytes_read;
- char *attachment_tmp;
+ const char *attachment_tmp;
if (packet_support (which_packet) == PACKET_DISABLE)
{
{
struct remote_state *rs = get_remote_state ();
char *p = rs->buf.data ();
- char *attachment;
+ const char *attachment;
int left = get_remote_packet_size ();
int ret, attachment_len;
int read_len;
{
cache->hit_count++;
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "readahead cache hit %s\n",
- pulongest (cache->hit_count));
+ remote_debug_printf ("readahead cache hit %s",
+ pulongest (cache->hit_count));
return ret;
}
cache->miss_count++;
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "readahead cache miss %s\n",
- pulongest (cache->miss_count));
+
+ remote_debug_printf ("readahead cache miss %s",
+ pulongest (cache->miss_count));
cache->fd = fd;
cache->offset = offset;
{
struct remote_state *rs = get_remote_state ();
char *p = rs->buf.data ();
- char *attachment;
+ const char *attachment;
int left = get_remote_packet_size ();
int len, attachment_len;
int read_len;
char *p = rs->buf.data ();
int left = get_remote_packet_size ();
int attachment_len, ret;
- char *attachment;
+ const char *attachment;
struct fio_stat fst;
int read_len;
switch (errnum)
{
case FILEIO_EPERM:
- return EPERM;
+ return EPERM;
case FILEIO_ENOENT:
- return ENOENT;
+ return ENOENT;
case FILEIO_EINTR:
- return EINTR;
+ return EINTR;
case FILEIO_EIO:
- return EIO;
+ return EIO;
case FILEIO_EBADF:
- return EBADF;
+ return EBADF;
case FILEIO_EACCES:
- return EACCES;
+ return EACCES;
case FILEIO_EFAULT:
- return EFAULT;
+ return EFAULT;
case FILEIO_EBUSY:
- return EBUSY;
+ return EBUSY;
case FILEIO_EEXIST:
- return EEXIST;
+ return EEXIST;
case FILEIO_ENODEV:
- return ENODEV;
+ return ENODEV;
case FILEIO_ENOTDIR:
- return ENOTDIR;
+ return ENOTDIR;
case FILEIO_EISDIR:
- return EISDIR;
+ return EISDIR;
case FILEIO_EINVAL:
- return EINVAL;
+ return EINVAL;
case FILEIO_ENFILE:
- return ENFILE;
+ return ENFILE;
case FILEIO_EMFILE:
- return EMFILE;
+ return EMFILE;
case FILEIO_EFBIG:
- return EFBIG;
+ return EFBIG;
case FILEIO_ENOSPC:
- return ENOSPC;
+ return ENOSPC;
case FILEIO_ESPIPE:
- return ESPIPE;
+ return ESPIPE;
case FILEIO_EROFS:
- return EROFS;
+ return EROFS;
case FILEIO_ENOSYS:
- return ENOSYS;
+ return ENOSYS;
case FILEIO_ENAMETOOLONG:
- return ENAMETOOLONG;
+ return ENAMETOOLONG;
}
return -1;
}
remote_file_delete (argv[0], from_tty);
}
-static void
-remote_command (const char *args, int from_tty)
-{
- help_list (remote_cmdlist, "remote ", all_commands, gdb_stdout);
-}
-
bool
remote_target::can_execute_reverse ()
{
encode_actions_rsp (loc, &tdp_actions, &stepping_actions);
tpaddr = loc->address;
- sprintf_vma (addrbuf, tpaddr);
+ strcpy (addrbuf, phex (tpaddr, sizeof (CORE_ADDR)));
ret = snprintf (buf.data (), buf.size (), "QTDP:%x:%s:%c:%lx:%x",
b->number, addrbuf, /* address */
(b->enable_state == bp_enabled ? 'E' : 'D'),
remote_target::enable_tracepoint (struct bp_location *location)
{
struct remote_state *rs = get_remote_state ();
- char addr_buf[40];
- sprintf_vma (addr_buf, location->address);
xsnprintf (rs->buf.data (), get_remote_packet_size (), "QTEnable:%x:%s",
- location->owner->number, addr_buf);
+ location->owner->number,
+ phex (location->address, sizeof (CORE_ADDR)));
putpkt (rs->buf);
remote_get_noisy_reply ();
if (rs->buf[0] == '\0')
remote_target::disable_tracepoint (struct bp_location *location)
{
struct remote_state *rs = get_remote_state ();
- char addr_buf[40];
- sprintf_vma (addr_buf, location->address);
xsnprintf (rs->buf.data (), get_remote_packet_size (), "QTDisable:%x:%s",
- location->owner->number, addr_buf);
+ location->owner->number,
+ phex (location->address, sizeof (CORE_ADDR)));
putpkt (rs->buf);
remote_get_noisy_reply ();
if (rs->buf[0] == '\0')
int anysecs = 0;
int offset = 0;
- if (!exec_bfd)
+ if (!current_program_space->exec_bfd ())
return; /* No information to give. */
struct remote_state *rs = get_remote_state ();
strcpy (rs->buf.data (), "QTro");
offset = strlen (rs->buf.data ());
- for (s = exec_bfd->sections; s; s = s->next)
+ for (s = current_program_space->exec_bfd ()->sections; s; s = s->next)
{
char tmp1[40], tmp2[40];
int sec_length;
if (*reply == '\0')
error (_("Target does not support this command."));
if (strcmp (reply, "OK") != 0)
- error (_("Bogus reply from target: %s"), reply);
+ error (_("Bogus reply from target: %s"), reply);
}
else if (val)
warning (_("Target does not support disconnected tracing."));
/* If we're not debugging a process yet, the IPA can't be
loaded. */
- if (!target_has_execution)
+ if (!target_has_execution ())
return 0;
/* Make sure the remote is pointing at the right process. */
if (val < 0)
{
*buf++ = '-';
- buf += hexnumstr (buf, (ULONGEST) -val);
+ buf += hexnumstr (buf, (ULONGEST) -val);
}
else
buf += hexnumstr (buf, (ULONGEST) val);
{
pos = buf;
pos += xsnprintf (pos, endbuf - pos, "%s=0x%x", packet->name,
- conf->bts.size);
+ conf->bts.size);
putpkt (buf);
getpkt (&rs->buf, 0);
{
pos = buf;
pos += xsnprintf (pos, endbuf - pos, "%s=0x%x", packet->name,
- conf->pt.size);
+ conf->pt.size);
putpkt (buf);
getpkt (&rs->buf, 0);
remote_thread_info *priv = get_remote_thread_info (tp);
if (tp->inf == inf && priv != NULL)
- {
+ {
if (handle_len != priv->thread_handle.size ())
error (_("Thread handle size mismatch: %d vs %zu (from remote)"),
- handle_len, priv->thread_handle.size ());
+ handle_len, priv->thread_handle.size ());
if (memcmp (thread_handle, priv->thread_handle.data (),
- handle_len) == 0)
+ handle_len) == 0)
return tp;
}
}
{
/* Don't propogate error information up to the client. Instead let
the client find out about the error by querying the target. */
- inferior_event_handler (INF_REG_EVENT, NULL);
+ inferior_event_handler (INF_REG_EVENT);
}
static void
remote_async_inferior_event_handler (gdb_client_data data)
{
- inferior_event_handler (INF_REG_EVENT, data);
+ inferior_event_handler (INF_REG_EVENT);
+
+ remote_target *remote = (remote_target *) data;
+ remote_state *rs = remote->get_remote_state ();
+
+ /* inferior_event_handler may have consumed an event pending on the
+ infrun side without calling target_wait on the REMOTE target, or
+ may have pulled an event out of a different target. Keep trying
+ for this remote target as long it still has either pending events
+ or unacknowledged notifications. */
+
+ if (rs->notif_state->pending_event[notif_client_stop.id] != NULL
+ || !rs->stop_reply_queue.empty ())
+ mark_async_event_handler (rs->remote_async_inferior_event_token);
}
int
}
}
-static void
-set_remote_cmd (const char *args, int from_tty)
-{
- help_list (remote_set_cmdlist, "set remote ", all_commands, gdb_stdout);
-}
-
static void
show_remote_cmd (const char *args, int from_tty)
{
}
}
+static void
+show_remote_debug (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("Debugging of remote protocol is %s.\n"),
+ value);
+}
+
+static void
+show_remote_timeout (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file,
+ _("Timeout limit to wait for target to respond is %s.\n"),
+ value);
+}
+
void _initialize_remote ();
void
_initialize_remote ()
/* set/show remote ... */
- add_prefix_cmd ("remote", class_maintenance, set_remote_cmd, _("\
+ add_basic_prefix_cmd ("remote", class_maintenance, _("\
Remote protocol specific variables.\n\
Configure various remote-protocol specific variables such as\n\
the packets being used."),
- &remote_set_cmdlist, "set remote ",
- 0 /* allow-unknown */, &setlist);
+ &remote_set_cmdlist, "set remote ",
+ 0 /* allow-unknown */, &setlist);
add_prefix_cmd ("remote", class_maintenance, show_remote_cmd, _("\
Remote protocol specific variables.\n\
Configure various remote-protocol specific variables such as\n\
set_remotebreak, show_remotebreak,
&setlist, &showlist);
cmd_name = "remotebreak";
- cmd = lookup_cmd (&cmd_name, setlist, "", -1, 1);
+ cmd = lookup_cmd (&cmd_name, setlist, "", NULL, -1, 1);
deprecate_cmd (cmd, "set remote interrupt-sequence");
cmd_name = "remotebreak"; /* needed because lookup_cmd updates the pointer */
- cmd = lookup_cmd (&cmd_name, showlist, "", -1, 1);
+ cmd = lookup_cmd (&cmd_name, showlist, "", NULL, -1, 1);
deprecate_cmd (cmd, "show remote interrupt-sequence");
add_setshow_enum_cmd ("interrupt-sequence", class_support,
"qXfer:memory-map:read", "memory-map", 0);
add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_osdata],
- "qXfer:osdata:read", "osdata", 0);
+ "qXfer:osdata:read", "osdata", 0);
add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_threads],
"qXfer:threads:read", "threads", 0);
add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_siginfo_read],
- "qXfer:siginfo:read", "read-siginfo-object", 0);
+ "qXfer:siginfo:read", "read-siginfo-object", 0);
add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_siginfo_write],
- "qXfer:siginfo:write", "write-siginfo-object", 0);
+ "qXfer:siginfo:write", "write-siginfo-object", 0);
add_packet_config_cmd
(&remote_protocol_packets[PACKET_qXfer_traceframe_info],
"InstallInTrace", "install-in-trace", 0);
add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_statictrace_read],
- "qXfer:statictrace:read", "read-sdata-object", 0);
+ "qXfer:statictrace:read", "read-sdata-object", 0);
add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_fdpic],
"qXfer:fdpic:read", "read-fdpic-loadmap", 0);
"multiprocess-feature", "multiprocess-feature", 0);
add_packet_config_cmd (&remote_protocol_packets[PACKET_swbreak_feature],
- "swbreak-feature", "swbreak-feature", 0);
+ "swbreak-feature", "swbreak-feature", 0);
add_packet_config_cmd (&remote_protocol_packets[PACKET_hwbreak_feature],
- "hwbreak-feature", "hwbreak-feature", 0);
+ "hwbreak-feature", "hwbreak-feature", 0);
add_packet_config_cmd (&remote_protocol_packets[PACKET_fork_event_feature],
"fork-event-feature", "fork-event-feature", 0);
`Z' packets is %s. */
&remote_set_cmdlist, &remote_show_cmdlist);
- add_prefix_cmd ("remote", class_files, remote_command, _("\
+ add_basic_prefix_cmd ("remote", class_files, _("\
Manipulate files on the remote system.\n\
Transfer files to and from the remote target system."),
- &remote_cmdlist, "remote ",
- 0 /* allow-unknown */, &cmdlist);
+ &remote_cmdlist, "remote ",
+ 0 /* allow-unknown */, &cmdlist);
add_cmd ("put", class_files, remote_put_command,
_("Copy a local file to the remote system."),
NULL, show_remote_packet_max_chars,
&setdebuglist, &showdebuglist);
+ add_setshow_boolean_cmd ("remote", no_class, &remote_debug,
+ _("Set debugging of remote protocol."),
+ _("Show debugging of remote protocol."),
+ _("\
+When enabled, each packet sent or received with the remote target\n\
+is displayed."),
+ NULL,
+ show_remote_debug,
+ &setdebuglist, &showdebuglist);
+
+ add_setshow_zuinteger_unlimited_cmd ("remotetimeout", no_class,
+ &remote_timeout, _("\
+Set timeout limit to wait for target to respond."), _("\
+Show timeout limit to wait for target to respond."), _("\
+This value is used to set the time limit for gdb to wait for a response\n\
+from the target."),
+ NULL,
+ show_remote_timeout,
+ &setlist, &showlist);
+
/* Eventually initialize fileio. See fileio.c */
- initialize_remote_fileio (remote_set_cmdlist, remote_show_cmdlist);
+ initialize_remote_fileio (&remote_set_cmdlist, &remote_show_cmdlist);
}