/* Target-dependent code for GDB, the GNU debugger.
Copyright (C) 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
- 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
- Free Software Foundation, Inc.
+ 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009,
+ 2010 Free Software Foundation, Inc.
This file is part of GDB.
#include "features/rs6000/powerpc-vsx32.c"
#include "features/rs6000/powerpc-403.c"
#include "features/rs6000/powerpc-403gc.c"
+#include "features/rs6000/powerpc-405.c"
#include "features/rs6000/powerpc-505.c"
#include "features/rs6000/powerpc-601.c"
#include "features/rs6000/powerpc-602.c"
/* Return non-zero if the architecture described by GDBARCH has
VSX registers (vsr0 --- vsr63). */
-int
+static int
ppc_vsx_support_p (struct gdbarch *gdbarch)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
rs6000_in_function_epilogue_p (struct gdbarch *gdbarch, CORE_ADDR pc)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
bfd_byte insn_buf[PPC_INSN_SIZE];
CORE_ADDR scan_pc, func_start, func_end, epilogue_start, epilogue_end;
unsigned long insn;
{
if (!safe_frame_unwind_memory (curfrm, scan_pc, insn_buf, PPC_INSN_SIZE))
return 0;
- insn = extract_unsigned_integer (insn_buf, PPC_INSN_SIZE);
+ insn = extract_unsigned_integer (insn_buf, PPC_INSN_SIZE, byte_order);
if (insn == 0x4e800020)
break;
/* Assume a bctr is a tail call unless it points strictly within
{
if (!safe_frame_unwind_memory (curfrm, scan_pc, insn_buf, PPC_INSN_SIZE))
return 0;
- insn = extract_unsigned_integer (insn_buf, PPC_INSN_SIZE);
+ insn = extract_unsigned_integer (insn_buf, PPC_INSN_SIZE, byte_order);
if (insn_changes_sp_or_jumps (insn))
return 1;
}
/* Fix up the state of registers and memory after having single-stepped
a displaced instruction. */
-void
+static void
ppc_displaced_step_fixup (struct gdbarch *gdbarch,
- struct displaced_step_closure *closure,
- CORE_ADDR from, CORE_ADDR to,
- struct regcache *regs)
+ struct displaced_step_closure *closure,
+ CORE_ADDR from, CORE_ADDR to,
+ struct regcache *regs)
{
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
/* Since we use simple_displaced_step_copy_insn, our closure is a
copy of the instruction. */
ULONGEST insn = extract_unsigned_integer ((gdb_byte *) closure,
- PPC_INSN_SIZE);
+ PPC_INSN_SIZE, byte_order);
ULONGEST opcode = 0;
/* Offset for non PC-relative instructions. */
LONGEST offset = PPC_INSN_SIZE;
if (debug_displaced)
fprintf_unfiltered (gdb_stdlog,
- "displaced: (ppc) fixup (0x%s, 0x%s)\n",
- paddr_nz (from), paddr_nz (to));
+ "displaced: (ppc) fixup (%s, %s)\n",
+ paddress (gdbarch, from), paddress (gdbarch, to));
/* Handle PC-relative branch instructions. */
if (debug_displaced)
fprintf_unfiltered
(gdb_stdlog,
- "displaced: (ppc) branch instruction: 0x%s\n"
- "displaced: (ppc) adjusted PC from 0x%s to 0x%s\n",
- paddr_nz (insn), paddr_nz (current_pc),
- paddr_nz (from + offset));
+ "displaced: (ppc) branch instruction: %s\n"
+ "displaced: (ppc) adjusted PC from %s to %s\n",
+ paddress (gdbarch, insn), paddress (gdbarch, current_pc),
+ paddress (gdbarch, from + offset));
regcache_cooked_write_unsigned (regs, gdbarch_pc_regnum (gdbarch),
from + offset);
from + PPC_INSN_SIZE);
if (debug_displaced)
fprintf_unfiltered (gdb_stdlog,
- "displaced: (ppc) adjusted LR to 0x%s\n",
- paddr_nz (from + PPC_INSN_SIZE));
+ "displaced: (ppc) adjusted LR to %s\n",
+ paddress (gdbarch, from + PPC_INSN_SIZE));
}
}
from + offset);
}
+/* Always use hardware single-stepping to execute the
+ displaced instruction. */
+static int
+ppc_displaced_step_hw_singlestep (struct gdbarch *gdbarch,
+ struct displaced_step_closure *closure)
+{
+ return 1;
+}
+
/* Instruction masks used during single-stepping of atomic sequences. */
#define LWARX_MASK 0xfc0007fe
#define LWARX_INSTRUCTION 0x7c000028
int
ppc_deal_with_atomic_sequence (struct frame_info *frame)
{
+ struct gdbarch *gdbarch = get_frame_arch (frame);
+ struct address_space *aspace = get_frame_address_space (frame);
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
CORE_ADDR pc = get_frame_pc (frame);
CORE_ADDR breaks[2] = {-1, -1};
CORE_ADDR loc = pc;
CORE_ADDR closing_insn; /* Instruction that closes the atomic sequence. */
- int insn = read_memory_integer (loc, PPC_INSN_SIZE);
+ int insn = read_memory_integer (loc, PPC_INSN_SIZE, byte_order);
int insn_count;
int index;
int last_breakpoint = 0; /* Defaults to 0 (no breakpoints placed). */
for (insn_count = 0; insn_count < atomic_sequence_length; ++insn_count)
{
loc += PPC_INSN_SIZE;
- insn = read_memory_integer (loc, PPC_INSN_SIZE);
+ insn = read_memory_integer (loc, PPC_INSN_SIZE, byte_order);
/* Assume that there is at most one conditional branch in the atomic
sequence. If a conditional branch is found, put a breakpoint in
closing_insn = loc;
loc += PPC_INSN_SIZE;
- insn = read_memory_integer (loc, PPC_INSN_SIZE);
+ insn = read_memory_integer (loc, PPC_INSN_SIZE, byte_order);
/* Insert a breakpoint right after the end of the atomic sequence. */
breaks[0] = loc;
/* Effectively inserts the breakpoints. */
for (index = 0; index <= last_breakpoint; index++)
- insert_single_step_breakpoint (breaks[index]);
+ insert_single_step_breakpoint (gdbarch, aspace, breaks[index]);
return 1;
}
they can use to access PIC data using PC-relative offsets. */
static int
-bl_to_blrl_insn_p (CORE_ADDR pc, int insn)
+bl_to_blrl_insn_p (CORE_ADDR pc, int insn, enum bfd_endian byte_order)
{
CORE_ADDR dest;
int immediate;
else
dest = pc + immediate;
- dest_insn = read_memory_integer (dest, 4);
+ dest_insn = read_memory_integer (dest, 4, byte_order);
if ((dest_insn & 0xfc00ffff) == 0x4c000021) /* blrl */
return 1;
#define BL_INSTRUCTION 0x48000001
#define BL_DISPLACEMENT_MASK 0x03fffffc
+static unsigned long
+rs6000_fetch_instruction (struct gdbarch *gdbarch, const CORE_ADDR pc)
+{
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+ gdb_byte buf[4];
+ unsigned long op;
+
+ /* Fetch the instruction and convert it to an integer. */
+ if (target_read_memory (pc, buf, 4))
+ return 0;
+ op = extract_unsigned_integer (buf, 4, byte_order);
+
+ return op;
+}
+
+/* GCC generates several well-known sequences of instructions at the begining
+ of each function prologue when compiling with -fstack-check. If one of
+ such sequences starts at START_PC, then return the address of the
+ instruction immediately past this sequence. Otherwise, return START_PC. */
+
+static CORE_ADDR
+rs6000_skip_stack_check (struct gdbarch *gdbarch, const CORE_ADDR start_pc)
+{
+ CORE_ADDR pc = start_pc;
+ unsigned long op = rs6000_fetch_instruction (gdbarch, pc);
+
+ /* First possible sequence: A small number of probes.
+ stw 0, -<some immediate>(1)
+ [repeat this instruction any (small) number of times]
+ */
+
+ if ((op & 0xffff0000) == 0x90010000)
+ {
+ while ((op & 0xffff0000) == 0x90010000)
+ {
+ pc = pc + 4;
+ op = rs6000_fetch_instruction (gdbarch, pc);
+ }
+ return pc;
+ }
+
+ /* Second sequence: A probing loop.
+ addi 12,1,-<some immediate>
+ lis 0,-<some immediate>
+ [possibly ori 0,0,<some immediate>]
+ add 0,12,0
+ cmpw 0,12,0
+ beq 0,<disp>
+ addi 12,12,-<some immediate>
+ stw 0,0(12)
+ b <disp>
+ [possibly one last probe: stw 0,<some immediate>(12)]
+ */
+
+ while (1)
+ {
+ /* addi 12,1,-<some immediate> */
+ if ((op & 0xffff0000) != 0x39810000)
+ break;
+
+ /* lis 0,-<some immediate> */
+ pc = pc + 4;
+ op = rs6000_fetch_instruction (gdbarch, pc);
+ if ((op & 0xffff0000) != 0x3c000000)
+ break;
+
+ pc = pc + 4;
+ op = rs6000_fetch_instruction (gdbarch, pc);
+ /* [possibly ori 0,0,<some immediate>] */
+ if ((op & 0xffff0000) == 0x60000000)
+ {
+ pc = pc + 4;
+ op = rs6000_fetch_instruction (gdbarch, pc);
+ }
+ /* add 0,12,0 */
+ if (op != 0x7c0c0214)
+ break;
+
+ /* cmpw 0,12,0 */
+ pc = pc + 4;
+ op = rs6000_fetch_instruction (gdbarch, pc);
+ if (op != 0x7c0c0000)
+ break;
+
+ /* beq 0,<disp> */
+ pc = pc + 4;
+ op = rs6000_fetch_instruction (gdbarch, pc);
+ if ((op & 0xff9f0001) != 0x41820000)
+ break;
+
+ /* addi 12,12,-<some immediate> */
+ pc = pc + 4;
+ op = rs6000_fetch_instruction (gdbarch, pc);
+ if ((op & 0xffff0000) != 0x398c0000)
+ break;
+
+ /* stw 0,0(12) */
+ pc = pc + 4;
+ op = rs6000_fetch_instruction (gdbarch, pc);
+ if (op != 0x900c0000)
+ break;
+
+ /* b <disp> */
+ pc = pc + 4;
+ op = rs6000_fetch_instruction (gdbarch, pc);
+ if ((op & 0xfc000001) != 0x48000000)
+ break;
+
+ /* [possibly one last probe: stw 0,<some immediate>(12)] */
+ pc = pc + 4;
+ op = rs6000_fetch_instruction (gdbarch, pc);
+ if ((op & 0xffff0000) == 0x900c0000)
+ {
+ pc = pc + 4;
+ op = rs6000_fetch_instruction (gdbarch, pc);
+ }
+
+ /* We found a valid stack-check sequence, return the new PC. */
+ return pc;
+ }
+
+ /* Third sequence: No probe; instead, a comparizon between the stack size
+ limit (saved in a run-time global variable) and the current stack
+ pointer:
+
+ addi 0,1,-<some immediate>
+ lis 12,__gnat_stack_limit@ha
+ lwz 12,__gnat_stack_limit@l(12)
+ twllt 0,12
+
+ or, with a small variant in the case of a bigger stack frame:
+ addis 0,1,<some immediate>
+ addic 0,0,-<some immediate>
+ lis 12,__gnat_stack_limit@ha
+ lwz 12,__gnat_stack_limit@l(12)
+ twllt 0,12
+ */
+ while (1)
+ {
+ /* addi 0,1,-<some immediate> */
+ if ((op & 0xffff0000) != 0x38010000)
+ {
+ /* small stack frame variant not recognized; try the
+ big stack frame variant: */
+
+ /* addis 0,1,<some immediate> */
+ if ((op & 0xffff0000) != 0x3c010000)
+ break;
+
+ /* addic 0,0,-<some immediate> */
+ pc = pc + 4;
+ op = rs6000_fetch_instruction (gdbarch, pc);
+ if ((op & 0xffff0000) != 0x30000000)
+ break;
+ }
+
+ /* lis 12,<some immediate> */
+ pc = pc + 4;
+ op = rs6000_fetch_instruction (gdbarch, pc);
+ if ((op & 0xffff0000) != 0x3d800000)
+ break;
+
+ /* lwz 12,<some immediate>(12) */
+ pc = pc + 4;
+ op = rs6000_fetch_instruction (gdbarch, pc);
+ if ((op & 0xffff0000) != 0x818c0000)
+ break;
+
+ /* twllt 0,12 */
+ pc = pc + 4;
+ op = rs6000_fetch_instruction (gdbarch, pc);
+ if ((op & 0xfffffffe) != 0x7c406008)
+ break;
+
+ /* We found a valid stack-check sequence, return the new PC. */
+ return pc;
+ }
+
+ /* No stack check code in our prologue, return the start_pc. */
+ return start_pc;
+}
+
/* return pc value after skipping a function prologue and also return
information about a function frame.
int r0_contains_arg = 0;
const struct bfd_arch_info *arch_info = gdbarch_bfd_arch_info (gdbarch);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
memset (fdata, 0, sizeof (struct rs6000_framedata));
fdata->saved_gpr = -1;
fdata->nosavedpc = 1;
fdata->lr_register = -1;
+ pc = rs6000_skip_stack_check (gdbarch, pc);
+ if (pc >= lim_pc)
+ pc = lim_pc;
+
for (;; pc += 4)
{
/* Sometimes it isn't clear if an instruction is a prologue
/* Fetch the instruction and convert it to an integer. */
if (target_read_memory (pc, buf, 4))
break;
- op = extract_unsigned_integer (buf, 4);
+ op = extract_unsigned_integer (buf, 4, byte_order);
if ((op & 0xfc1fffff) == 0x7c0802a6)
{ /* mflr Rx */
/* If the return address has already been saved, we can skip
calls to blrl (for PIC). */
- if (lr_reg != -1 && bl_to_blrl_insn_p (pc, op))
+ if (lr_reg != -1 && bl_to_blrl_insn_p (pc, op, byte_order))
{
fdata->used_bl = 1;
continue;
break;
}
- op = read_memory_integer (pc + 4, 4);
+ op = read_memory_integer (pc + 4, 4, byte_order);
/* At this point, make sure this is not a trampoline
function (a function that simply calls another functions,
if ((op & 0xfc000001) == 0x48000001)
{ /* bl foo, an initializer function? */
- op = read_memory_integer (pc + 4, 4);
+ op = read_memory_integer (pc + 4, 4, byte_order);
if (op == 0x4def7b82)
{ /* cror 0xf, 0xf, 0xf (nop) */
is greater. */
if (find_pc_partial_function (pc, NULL, &func_addr, NULL))
{
- CORE_ADDR post_prologue_pc = skip_prologue_using_sal (func_addr);
+ CORE_ADDR post_prologue_pc
+ = skip_prologue_using_sal (gdbarch, func_addr);
if (post_prologue_pc != 0)
return max (pc, post_prologue_pc);
}
/* Find an upper limit on the function prologue using the debug
information. If the debug information could not be used to provide
that bound, then use an arbitrary large number as the upper bound. */
- limit_pc = skip_prologue_using_sal (pc);
+ limit_pc = skip_prologue_using_sal (gdbarch, pc);
if (limit_pc == 0)
limit_pc = pc + 100; /* Magic. */
address of the instruction following that call. Otherwise, it simply
returns PC. */
-CORE_ADDR
+static CORE_ADDR
rs6000_skip_main_prologue (struct gdbarch *gdbarch, CORE_ADDR pc)
{
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
gdb_byte buf[4];
unsigned long op;
if (target_read_memory (pc, buf, 4))
return pc;
- op = extract_unsigned_integer (buf, 4);
+ op = extract_unsigned_integer (buf, 4, byte_order);
if ((op & BL_MASK) == BL_INSTRUCTION)
{
gdbarch_skip_trampoline_code hooks in handle_inferior_event() to skip past
@FIX code. */
-int
-rs6000_in_solib_return_trampoline (CORE_ADDR pc, char *name)
+static int
+rs6000_in_solib_return_trampoline (struct gdbarch *gdbarch,
+ CORE_ADDR pc, char *name)
{
return name && !strncmp (name, "@FIX", 4);
}
Result is desired PC to step until, or NULL if we are not in
code that should be skipped. */
-CORE_ADDR
+static CORE_ADDR
rs6000_skip_trampoline_code (struct frame_info *frame, CORE_ADDR pc)
{
- struct gdbarch_tdep *tdep = gdbarch_tdep (get_frame_arch (frame));
+ struct gdbarch *gdbarch = get_frame_arch (frame);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
unsigned int ii, op;
int rel;
CORE_ADDR solib_target_pc;
/* Check for bigtoc fixup code. */
msymbol = lookup_minimal_symbol_by_pc (pc);
if (msymbol
- && rs6000_in_solib_return_trampoline (pc, SYMBOL_LINKAGE_NAME (msymbol)))
+ && rs6000_in_solib_return_trampoline (gdbarch, pc,
+ SYMBOL_LINKAGE_NAME (msymbol)))
{
/* Double-check that the third instruction from PC is relative "b". */
- op = read_memory_integer (pc + 8, 4);
+ op = read_memory_integer (pc + 8, 4, byte_order);
if ((op & 0xfc000003) == 0x48000000)
{
/* Extract bits 6-29 as a signed 24-bit relative word address and
for (ii = 0; trampoline_code[ii]; ++ii)
{
- op = read_memory_integer (pc + (ii * 4), 4);
+ op = read_memory_integer (pc + (ii * 4), 4, byte_order);
if (op != trampoline_code[ii])
return 0;
}
ii = get_frame_register_unsigned (frame, 11); /* r11 holds destination addr */
- pc = read_memory_unsigned_integer (ii, tdep->wordsize); /* (r11) value */
+ pc = read_memory_unsigned_integer (ii, tdep->wordsize, byte_order);
return pc;
}
if (!tdep->ppc_builtin_type_vec64)
{
+ const struct builtin_type *bt = builtin_type (gdbarch);
+
/* The type we're building is this: */
#if 0
union __gdb_builtin_type_vec64
struct type *t;
- t = init_composite_type ("__ppc_builtin_type_vec64", TYPE_CODE_UNION);
- append_composite_type_field (t, "uint64", builtin_type_int64);
+ t = arch_composite_type (gdbarch,
+ "__ppc_builtin_type_vec64", TYPE_CODE_UNION);
+ append_composite_type_field (t, "uint64", bt->builtin_int64);
append_composite_type_field (t, "v2_float",
- init_vector_type (builtin_type_float, 2));
+ init_vector_type (bt->builtin_float, 2));
append_composite_type_field (t, "v2_int32",
- init_vector_type (builtin_type_int32, 2));
+ init_vector_type (bt->builtin_int32, 2));
append_composite_type_field (t, "v4_int16",
- init_vector_type (builtin_type_int16, 4));
+ init_vector_type (bt->builtin_int16, 4));
append_composite_type_field (t, "v8_int8",
- init_vector_type (builtin_type_int8, 8));
+ init_vector_type (bt->builtin_int8, 8));
TYPE_VECTOR (t) = 1;
TYPE_NAME (t) = "ppc_builtin_type_vec64";
if (!tdep->ppc_builtin_type_vec128)
{
+ const struct builtin_type *bt = builtin_type (gdbarch);
+
/* The type we're building is this
type = union __ppc_builtin_type_vec128 {
uint128_t uint128;
+ double v2_double[2];
float v4_float[4];
int32_t v4_int32[4];
int16_t v8_int16[8];
struct type *t;
- t = init_composite_type ("__ppc_builtin_type_vec128", TYPE_CODE_UNION);
- append_composite_type_field (t, "uint128", builtin_type_uint128);
+ t = arch_composite_type (gdbarch,
+ "__ppc_builtin_type_vec128", TYPE_CODE_UNION);
+ append_composite_type_field (t, "uint128", bt->builtin_uint128);
+ append_composite_type_field (t, "v2_double",
+ init_vector_type (bt->builtin_double, 2));
append_composite_type_field (t, "v4_float",
- init_vector_type (builtin_type (gdbarch)->builtin_float, 4));
+ init_vector_type (bt->builtin_float, 4));
append_composite_type_field (t, "v4_int32",
- init_vector_type (builtin_type_int32, 4));
+ init_vector_type (bt->builtin_int32, 4));
append_composite_type_field (t, "v8_int16",
- init_vector_type (builtin_type_int16, 8));
+ init_vector_type (bt->builtin_int16, 8));
append_composite_type_field (t, "v16_int8",
- init_vector_type (builtin_type_int8, 16));
+ init_vector_type (bt->builtin_int8, 16));
TYPE_VECTOR (t) = 1;
TYPE_NAME (t) = "ppc_builtin_type_vec128";
&& regnum >= tdep->ppc_fp0_regnum
&& regnum < tdep->ppc_fp0_regnum + ppc_num_fprs
&& TYPE_CODE (type) == TYPE_CODE_FLT
- && TYPE_LENGTH (type) != TYPE_LENGTH (builtin_type_double));
+ && TYPE_LENGTH (type)
+ != TYPE_LENGTH (builtin_type (gdbarch)->builtin_double));
}
static void
struct type *type,
gdb_byte *to)
{
+ struct gdbarch *gdbarch = get_frame_arch (frame);
gdb_byte from[MAX_REGISTER_SIZE];
gdb_assert (TYPE_CODE (type) == TYPE_CODE_FLT);
get_frame_register (frame, regnum, from);
- convert_typed_floating (from, builtin_type_double, to, type);
+ convert_typed_floating (from, builtin_type (gdbarch)->builtin_double,
+ to, type);
}
static void
struct type *type,
const gdb_byte *from)
{
+ struct gdbarch *gdbarch = get_frame_arch (frame);
gdb_byte to[MAX_REGISTER_SIZE];
gdb_assert (TYPE_CODE (type) == TYPE_CODE_FLT);
- convert_typed_floating (from, type, to, builtin_type_double);
+ convert_typed_floating (from, type,
+ to, builtin_type (gdbarch)->builtin_double);
put_frame_register (frame, regnum, to);
}
bfd_mach_rs6k, &tdesc_rs6000},
{"403", "IBM PowerPC 403", bfd_arch_powerpc,
bfd_mach_ppc_403, &tdesc_powerpc_403},
+ {"405", "IBM PowerPC 405", bfd_arch_powerpc,
+ bfd_mach_ppc_405, &tdesc_powerpc_405},
{"601", "Motorola PowerPC 601", bfd_arch_powerpc,
bfd_mach_ppc_601, &tdesc_powerpc_601},
{"602", "Motorola PowerPC 602", bfd_arch_powerpc,
struct rs6000_frame_cache *cache;
struct gdbarch *gdbarch = get_frame_arch (this_frame);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
struct rs6000_framedata fdata;
int wordsize = tdep->wordsize;
CORE_ADDR func, pc;
if (!fdata.frameless)
/* Frameless really means stackless. */
- cache->base = read_memory_unsigned_integer (cache->base, wordsize);
+ cache->base
+ = read_memory_unsigned_integer (cache->base, wordsize, byte_order);
trad_frame_set_value (cache->saved_regs,
gdbarch_sp_regnum (gdbarch), cache->base);
int num_pseudoregs = 0;
int cur_reg;
+ /* INFO may refer to a binary that is not of the PowerPC architecture,
+ e.g. when debugging a stand-alone SPE executable on a Cell/B.E. system.
+ In this case, we must not attempt to infer properties of the (PowerPC
+ side) of the target system from properties of that executable. Trust
+ the target description instead. */
+ if (info.abfd
+ && bfd_get_arch (info.abfd) != bfd_arch_powerpc
+ && bfd_get_arch (info.abfd) != bfd_arch_rs6000)
+ info.abfd = NULL;
+
from_xcoff_exec = info.abfd && info.abfd->format == bfd_object &&
bfd_get_flavour (info.abfd) == bfd_target_xcoff_flavour;
/* Setup displaced stepping. */
set_gdbarch_displaced_step_copy_insn (gdbarch,
simple_displaced_step_copy_insn);
+ set_gdbarch_displaced_step_hw_singlestep (gdbarch,
+ ppc_displaced_step_hw_singlestep);
set_gdbarch_displaced_step_fixup (gdbarch, ppc_displaced_step_fixup);
set_gdbarch_displaced_step_free_closure (gdbarch,
simple_displaced_step_free_closure);
initialize_tdesc_powerpc_vsx32 ();
initialize_tdesc_powerpc_403 ();
initialize_tdesc_powerpc_403gc ();
+ initialize_tdesc_powerpc_405 ();
initialize_tdesc_powerpc_505 ();
initialize_tdesc_powerpc_601 ();
initialize_tdesc_powerpc_602 ();