/* Target-dependent code for GDB, the GNU debugger.
- Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 2000
+ Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
+ 1998, 1999, 2000, 2001, 2002
Free Software Foundation, Inc.
This file is part of GDB.
#include "gdbcmd.h"
#include "symfile.h"
#include "objfiles.h"
-#include "xcoffsolib.h"
+#include "arch-utils.h"
+#include "regcache.h"
+#include "doublest.h"
+#include "value.h"
+#include "parser-defs.h"
+
+#include "libbfd.h" /* for bfd_default_set_arch_mach */
+#include "coff/internal.h" /* for libcoff.h */
+#include "libcoff.h" /* for xcoff_data */
+
+#include "elf-bfd.h"
+
+#include "solib-svr4.h"
+#include "ppc-tdep.h"
+
+/* If the kernel has to deliver a signal, it pushes a sigcontext
+ structure on the stack and then calls the signal handler, passing
+ the address of the sigcontext in an argument register. Usually
+ the signal handler doesn't save this register, so we have to
+ access the sigcontext structure via an offset from the signal handler
+ frame.
+ The following constants were determined by experimentation on AIX 3.2. */
+#define SIG_FRAME_PC_OFFSET 96
+#define SIG_FRAME_LR_OFFSET 108
+#define SIG_FRAME_FP_OFFSET 284
+
+/* To be used by skip_prologue. */
+
+struct rs6000_framedata
+ {
+ int offset; /* total size of frame --- the distance
+ by which we decrement sp to allocate
+ the frame */
+ int saved_gpr; /* smallest # of saved gpr */
+ int saved_fpr; /* smallest # of saved fpr */
+ int saved_vr; /* smallest # of saved vr */
+ int alloca_reg; /* alloca register number (frame ptr) */
+ char frameless; /* true if frameless functions. */
+ char nosavedpc; /* true if pc not saved. */
+ int gpr_offset; /* offset of saved gprs from prev sp */
+ int fpr_offset; /* offset of saved fprs from prev sp */
+ int vr_offset; /* offset of saved vrs from prev sp */
+ int lr_offset; /* offset of saved lr */
+ int cr_offset; /* offset of saved cr */
+ int vrsave_offset; /* offset of saved vrsave register */
+ };
+
+/* Description of a single register. */
+
+struct reg
+ {
+ char *name; /* name of register */
+ unsigned char sz32; /* size on 32-bit arch, 0 if nonextant */
+ unsigned char sz64; /* size on 64-bit arch, 0 if nonextant */
+ unsigned char fpr; /* whether register is floating-point */
+ };
-extern int errno;
+/* Return the current architecture's gdbarch_tdep structure. */
+
+#define TDEP gdbarch_tdep (current_gdbarch)
/* Breakpoint shadows for the single step instructions will be kept here. */
inferior under AIX. The initialization code in rs6000-nat.c sets
this hook to point to find_toc_address. */
-CORE_ADDR (*find_toc_address_hook) PARAMS ((CORE_ADDR)) = NULL;
+CORE_ADDR (*rs6000_find_toc_address_hook) (CORE_ADDR) = NULL;
-/* Static function prototypes */
+/* Hook to set the current architecture when starting a child process.
+ rs6000-nat.c sets this. */
- static CORE_ADDR branch_dest PARAMS ((int opcode, int instr, CORE_ADDR pc,
- CORE_ADDR safety));
+void (*rs6000_set_host_arch_hook) (int) = NULL;
- static void frame_get_saved_regs PARAMS ((struct frame_info * fi,
- struct rs6000_framedata * fdatap));
+/* Static function prototypes */
- static void pop_dummy_frame PARAMS ((void));
+static CORE_ADDR branch_dest (int opcode, int instr, CORE_ADDR pc,
+ CORE_ADDR safety);
+static CORE_ADDR skip_prologue (CORE_ADDR, CORE_ADDR,
+ struct rs6000_framedata *);
+static void frame_get_saved_regs (struct frame_info * fi,
+ struct rs6000_framedata * fdatap);
+static CORE_ADDR frame_initial_stack_address (struct frame_info *);
- static CORE_ADDR frame_initial_stack_address PARAMS ((struct frame_info *));
+/* Read a LEN-byte address from debugged memory address MEMADDR. */
-CORE_ADDR
-rs6000_skip_prologue (pc)
- CORE_ADDR pc;
+static CORE_ADDR
+read_memory_addr (CORE_ADDR memaddr, int len)
+{
+ return read_memory_unsigned_integer (memaddr, len);
+}
+
+static CORE_ADDR
+rs6000_skip_prologue (CORE_ADDR pc)
{
struct rs6000_framedata frame;
- pc = skip_prologue (pc, &frame);
+ pc = skip_prologue (pc, 0, &frame);
return pc;
}
};
void
-rs6000_init_extra_frame_info (fromleaf, fi)
- int fromleaf;
- struct frame_info *fi;
+rs6000_init_extra_frame_info (int fromleaf, struct frame_info *fi)
{
fi->extra_info = (struct frame_extra_info *)
frame_obstack_alloc (sizeof (struct frame_extra_info));
fi->signal_handler_caller = 1;
}
+/* Put here the code to store, into a struct frame_saved_regs,
+ the addresses of the saved registers of frame described by FRAME_INFO.
+ This includes special registers such as pc and fp saved in special
+ ways in the stack frame. sp is even more special:
+ the address we return for it IS the sp for the next frame. */
+
+/* In this implementation for RS/6000, we do *not* save sp. I am
+ not sure if it will be needed. The following function takes care of gpr's
+ and fpr's only. */
void
-rs6000_frame_init_saved_regs (fi)
- struct frame_info *fi;
+rs6000_frame_init_saved_regs (struct frame_info *fi)
{
frame_get_saved_regs (fi, NULL);
}
-CORE_ADDR
-rs6000_frame_args_address (fi)
- struct frame_info *fi;
+static CORE_ADDR
+rs6000_frame_args_address (struct frame_info *fi)
{
if (fi->extra_info->initial_sp != 0)
return fi->extra_info->initial_sp;
return frame_initial_stack_address (fi);
}
+/* Immediately after a function call, return the saved pc.
+ Can't go through the frames for this because on some machines
+ the new frame is not set up until the new function executes
+ some instructions. */
+
+static CORE_ADDR
+rs6000_saved_pc_after_call (struct frame_info *fi)
+{
+ return read_register (gdbarch_tdep (current_gdbarch)->ppc_lr_regnum);
+}
/* Calculate the destination of a branch/jump. Return -1 if not a branch. */
static CORE_ADDR
-branch_dest (opcode, instr, pc, safety)
- int opcode;
- int instr;
- CORE_ADDR pc;
- CORE_ADDR safety;
+branch_dest (int opcode, int instr, CORE_ADDR pc, CORE_ADDR safety)
{
CORE_ADDR dest;
int immediate;
if (ext_op == 16) /* br conditional register */
{
- dest = read_register (LR_REGNUM) & ~3;
+ dest = read_register (gdbarch_tdep (current_gdbarch)->ppc_lr_regnum) & ~3;
/* If we are about to return from a signal handler, dest is
something like 0x3c90. The current frame is a signal handler
fi = get_current_frame ();
if (fi != NULL)
- dest = read_memory_integer (fi->frame + SIG_FRAME_PC_OFFSET,
- 4);
+ dest = read_memory_addr (fi->frame + SIG_FRAME_PC_OFFSET,
+ TDEP->wordsize);
}
}
else if (ext_op == 528) /* br cond to count reg */
{
- dest = read_register (CTR_REGNUM) & ~3;
+ dest = read_register (gdbarch_tdep (current_gdbarch)->ppc_ctr_regnum) & ~3;
/* If we are about to execute a system call, dest is something
like 0x22fc or 0x3b00. Upon completion the system call
will return to the address in the link register. */
if (dest < TEXT_SEGMENT_BASE)
- dest = read_register (LR_REGNUM) & ~3;
+ dest = read_register (gdbarch_tdep (current_gdbarch)->ppc_lr_regnum) & ~3;
}
else
return -1;
#define BIG_BREAKPOINT { 0x7d, 0x82, 0x10, 0x08 }
#define LITTLE_BREAKPOINT { 0x08, 0x10, 0x82, 0x7d }
-unsigned char *
-rs6000_breakpoint_from_pc (bp_addr, bp_size)
- CORE_ADDR *bp_addr;
- int *bp_size;
+const static unsigned char *
+rs6000_breakpoint_from_pc (CORE_ADDR *bp_addr, int *bp_size)
{
static unsigned char big_breakpoint[] = BIG_BREAKPOINT;
static unsigned char little_breakpoint[] = LITTLE_BREAKPOINT;
*bp_size = 4;
- if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
return big_breakpoint;
else
return little_breakpoint;
/* AIX does not support PT_STEP. Simulate it. */
void
-rs6000_software_single_step (signal, insert_breakpoints_p)
- unsigned int signal;
- int insert_breakpoints_p;
+rs6000_software_single_step (enum target_signal signal,
+ int insert_breakpoints_p)
{
-#define INSNLEN(OPCODE) 4
-
- static char le_breakp[] = LITTLE_BREAKPOINT;
- static char be_breakp[] = BIG_BREAKPOINT;
- char *breakp = TARGET_BYTE_ORDER == BIG_ENDIAN ? be_breakp : le_breakp;
+ CORE_ADDR dummy;
+ int breakp_sz;
+ const char *breakp = rs6000_breakpoint_from_pc (&dummy, &breakp_sz);
int ii, insn;
CORE_ADDR loc;
CORE_ADDR breaks[2];
insn = read_memory_integer (loc, 4);
- breaks[0] = loc + INSNLEN (insn);
+ breaks[0] = loc + breakp_sz;
opcode = insn >> 26;
breaks[1] = branch_dest (opcode, insn, loc, breaks[0]);
/* ignore invalid breakpoint. */
if (breaks[ii] == -1)
continue;
-
- read_memory (breaks[ii], stepBreaks[ii].data, 4);
-
- write_memory (breaks[ii], breakp, 4);
+ target_insert_breakpoint (breaks[ii], stepBreaks[ii].data);
stepBreaks[ii].address = breaks[ii];
}
/* remove step breakpoints. */
for (ii = 0; ii < 2; ++ii)
if (stepBreaks[ii].address != 0)
- write_memory
- (stepBreaks[ii].address, stepBreaks[ii].data, 4);
-
+ target_remove_breakpoint (stepBreaks[ii].address,
+ stepBreaks[ii].data);
}
errno = 0; /* FIXME, don't ignore errors! */
/* What errors? {read,write}_memory call error(). */
which we decrement the sp to allocate the frame.
- saved_gpr is the number of the first saved gpr.
- saved_fpr is the number of the first saved fpr.
+ - saved_vr is the number of the first saved vr.
- alloca_reg is the number of the register used for alloca() handling.
Otherwise -1.
- gpr_offset is the offset of the first saved gpr from the previous frame.
- fpr_offset is the offset of the first saved fpr from the previous frame.
+ - vr_offset is the offset of the first saved vr from the previous frame.
- lr_offset is the offset of the saved lr
- cr_offset is the offset of the saved cr
+ - vrsave_offset is the offset of the saved vrsave register
*/
#define SIGNED_SHORT(x) \
#define GET_SRC_REG(x) (((x) >> 21) & 0x1f)
-CORE_ADDR
-skip_prologue (pc, fdata)
- CORE_ADDR pc;
- struct rs6000_framedata *fdata;
+/* Limit the number of skipped non-prologue instructions, as the examining
+ of the prologue is expensive. */
+static int max_skip_non_prologue_insns = 10;
+
+/* Given PC representing the starting address of a function, and
+ LIM_PC which is the (sloppy) limit to which to scan when looking
+ for a prologue, attempt to further refine this limit by using
+ the line data in the symbol table. If successful, a better guess
+ on where the prologue ends is returned, otherwise the previous
+ value of lim_pc is returned. */
+static CORE_ADDR
+refine_prologue_limit (CORE_ADDR pc, CORE_ADDR lim_pc)
+{
+ struct symtab_and_line prologue_sal;
+
+ prologue_sal = find_pc_line (pc, 0);
+ if (prologue_sal.line != 0)
+ {
+ int i;
+ CORE_ADDR addr = prologue_sal.end;
+
+ /* Handle the case in which compiler's optimizer/scheduler
+ has moved instructions into the prologue. We scan ahead
+ in the function looking for address ranges whose corresponding
+ line number is less than or equal to the first one that we
+ found for the function. (It can be less than when the
+ scheduler puts a body instruction before the first prologue
+ instruction.) */
+ for (i = 2 * max_skip_non_prologue_insns;
+ i > 0 && (lim_pc == 0 || addr < lim_pc);
+ i--)
+ {
+ struct symtab_and_line sal;
+
+ sal = find_pc_line (addr, 0);
+ if (sal.line == 0)
+ break;
+ if (sal.line <= prologue_sal.line
+ && sal.symtab == prologue_sal.symtab)
+ {
+ prologue_sal = sal;
+ }
+ addr = sal.end;
+ }
+
+ if (lim_pc == 0 || prologue_sal.end < lim_pc)
+ lim_pc = prologue_sal.end;
+ }
+ return lim_pc;
+}
+
+
+static CORE_ADDR
+skip_prologue (CORE_ADDR pc, CORE_ADDR lim_pc, struct rs6000_framedata *fdata)
{
CORE_ADDR orig_pc = pc;
+ CORE_ADDR last_prologue_pc = pc;
+ CORE_ADDR li_found_pc = 0;
char buf[4];
unsigned long op;
long offset = 0;
- int lr_reg = 0;
- int cr_reg = 0;
+ long vr_saved_offset = 0;
+ int lr_reg = -1;
+ int cr_reg = -1;
+ int vr_reg = -1;
+ int vrsave_reg = -1;
int reg;
int framep = 0;
int minimal_toc_loaded = 0;
- static struct rs6000_framedata zero_frame;
-
- *fdata = zero_frame;
+ int prev_insn_was_prologue_insn = 1;
+ int num_skip_non_prologue_insns = 0;
+
+ /* Attempt to find the end of the prologue when no limit is specified.
+ Note that refine_prologue_limit() has been written so that it may
+ be used to "refine" the limits of non-zero PC values too, but this
+ is only safe if we 1) trust the line information provided by the
+ compiler and 2) iterate enough to actually find the end of the
+ prologue.
+
+ It may become a good idea at some point (for both performance and
+ accuracy) to unconditionally call refine_prologue_limit(). But,
+ until we can make a clear determination that this is beneficial,
+ we'll play it safe and only use it to obtain a limit when none
+ has been specified. */
+ if (lim_pc == 0)
+ lim_pc = refine_prologue_limit (pc, lim_pc);
+
+ memset (fdata, 0, sizeof (struct rs6000_framedata));
fdata->saved_gpr = -1;
fdata->saved_fpr = -1;
+ fdata->saved_vr = -1;
fdata->alloca_reg = -1;
fdata->frameless = 1;
fdata->nosavedpc = 1;
- if (target_read_memory (pc, buf, 4))
- return pc; /* Can't access it -- assume no prologue. */
-
- /* Assume that subsequent fetches can fail with low probability. */
- pc -= 4;
- for (;;)
+ for (;; pc += 4)
{
- pc += 4;
- op = read_memory_integer (pc, 4);
+ /* Sometimes it isn't clear if an instruction is a prologue
+ instruction or not. When we encounter one of these ambiguous
+ cases, we'll set prev_insn_was_prologue_insn to 0 (false).
+ Otherwise, we'll assume that it really is a prologue instruction. */
+ if (prev_insn_was_prologue_insn)
+ last_prologue_pc = pc;
+
+ /* Stop scanning if we've hit the limit. */
+ if (lim_pc != 0 && pc >= lim_pc)
+ break;
+
+ prev_insn_was_prologue_insn = 1;
+
+ /* Fetch the instruction and convert it to an integer. */
+ if (target_read_memory (pc, buf, 4))
+ break;
+ op = extract_signed_integer (buf, 4);
if ((op & 0xfc1fffff) == 0x7c0802a6)
{ /* mflr Rx */
}
else if (((op & 0xfc1f0000) == 0xbc010000) || /* stm Rx, NUM(r1) */
- ((op & 0xfc1f0000) == 0x90010000 && /* st rx,NUM(r1),
- rx >= r13 */
- (op & 0x03e00000) >= 0x01a00000))
+ (((op & 0xfc1f0000) == 0x90010000 || /* st rx,NUM(r1) */
+ (op & 0xfc1f0003) == 0xf8010000) && /* std rx,NUM(r1) */
+ (op & 0x03e00000) >= 0x01a00000)) /* rx >= r13 */
{
reg = GET_SRC_REG (op);
if (fdata->saved_gpr == -1 || fdata->saved_gpr > reg)
{
fdata->saved_gpr = reg;
+ if ((op & 0xfc1f0003) == 0xf8010000)
+ op = (op >> 1) << 1;
fdata->gpr_offset = SIGNED_SHORT (op) + offset;
}
continue;
+ }
+ else if ((op & 0xffff0000) == 0x60000000)
+ {
+ /* nop */
+ /* Allow nops in the prologue, but do not consider them to
+ be part of the prologue unless followed by other prologue
+ instructions. */
+ prev_insn_was_prologue_insn = 0;
+ continue;
+
}
else if ((op & 0xffff0000) == 0x3c000000)
{ /* addis 0,0,NUM, used
continue;
}
- else if ((op & 0xffff0000) == lr_reg)
+ else if (lr_reg != -1 && (op & 0xffff0000) == lr_reg)
{ /* st Rx,NUM(r1)
where Rx == lr */
fdata->lr_offset = SIGNED_SHORT (op) + offset;
continue;
}
- else if ((op & 0xffff0000) == cr_reg)
+ else if (cr_reg != -1 && (op & 0xffff0000) == cr_reg)
{ /* st Rx,NUM(r1)
where Rx == cr */
fdata->cr_offset = SIGNED_SHORT (op) + offset;
break;
}
- else if (((op & 0xffff0000) == 0x801e0000 || /* lwz 0,NUM(r30), used
- in V.4 -mrelocatable */
- op == 0x7fc0f214) && /* add r30,r0,r30, used
- in V.4 -mrelocatable */
- lr_reg == 0x901e0000)
- {
- continue;
-
- }
- else if ((op & 0xffff0000) == 0x3fc00000 || /* addis 30,0,foo@ha, used
- in V.4 -mminimal-toc */
+ else if ((op & 0xffff0000) == 0x3fc00000 || /* addis 30,0,foo@ha, used
+ in V.4 -mminimal-toc */
(op & 0xffff0000) == 0x3bde0000)
{ /* addi 30,30,foo@l */
continue;
to save fprs??? */
fdata->frameless = 0;
- /* Don't skip over the subroutine call if it is not within the first
- three instructions of the prologue. */
+ /* Don't skip over the subroutine call if it is not within
+ the first three instructions of the prologue. */
if ((pc - orig_pc) > 8)
break;
op = read_memory_integer (pc + 4, 4);
- /* At this point, make sure this is not a trampoline function
- (a function that simply calls another functions, and nothing else).
- If the next is not a nop, this branch was part of the function
- prologue. */
+ /* At this point, make sure this is not a trampoline
+ function (a function that simply calls another functions,
+ and nothing else). If the next is not a nop, this branch
+ was part of the function prologue. */
if (op == 0x4def7b82 || op == 0) /* crorc 15, 15, 15 */
break; /* don't skip over
/* update stack pointer */
}
- else if ((op & 0xffff0000) == 0x94210000)
- { /* stu r1,NUM(r1) */
+ else if ((op & 0xffff0000) == 0x94210000 || /* stu r1,NUM(r1) */
+ (op & 0xffff0003) == 0xf8210001) /* stdu r1,NUM(r1) */
+ {
fdata->frameless = 0;
+ if ((op & 0xffff0003) == 0xf8210001)
+ op = (op >> 1) << 1;
fdata->offset = SIGNED_SHORT (op);
offset = fdata->offset;
continue;
/* store parameters in stack */
}
- else if ((op & 0xfc1f0000) == 0x90010000 || /* st rx,NUM(r1) */
+ else if ((op & 0xfc1f0003) == 0xf8010000 || /* std rx,NUM(r1) */
(op & 0xfc1f0000) == 0xd8010000 || /* stfd Rx,NUM(r1) */
- (op & 0xfc1f0000) == 0xfc010000)
- { /* frsp, fp?,NUM(r1) */
+ (op & 0xfc1f0000) == 0xfc010000) /* frsp, fp?,NUM(r1) */
+ {
continue;
/* store parameters in stack via frame pointer */
framep = 1;
fdata->alloca_reg = (op & ~0x38010000) >> 21;
continue;
-
}
+ /* AltiVec related instructions. */
+ /* Store the vrsave register (spr 256) in another register for
+ later manipulation, or load a register into the vrsave
+ register. 2 instructions are used: mfvrsave and
+ mtvrsave. They are shorthand notation for mfspr Rn, SPR256
+ and mtspr SPR256, Rn. */
+ /* mfspr Rn SPR256 == 011111 nnnnn 0000001000 01010100110
+ mtspr SPR256 Rn == 011111 nnnnn 0000001000 01110100110 */
+ else if ((op & 0xfc1fffff) == 0x7c0042a6) /* mfvrsave Rn */
+ {
+ vrsave_reg = GET_SRC_REG (op);
+ continue;
+ }
+ else if ((op & 0xfc1fffff) == 0x7c0043a6) /* mtvrsave Rn */
+ {
+ continue;
+ }
+ /* Store the register where vrsave was saved to onto the stack:
+ rS is the register where vrsave was stored in a previous
+ instruction. */
+ /* 100100 sssss 00001 dddddddd dddddddd */
+ else if ((op & 0xfc1f0000) == 0x90010000) /* stw rS, d(r1) */
+ {
+ if (vrsave_reg == GET_SRC_REG (op))
+ {
+ fdata->vrsave_offset = SIGNED_SHORT (op) + offset;
+ vrsave_reg = -1;
+ }
+ continue;
+ }
+ /* Compute the new value of vrsave, by modifying the register
+ where vrsave was saved to. */
+ else if (((op & 0xfc000000) == 0x64000000) /* oris Ra, Rs, UIMM */
+ || ((op & 0xfc000000) == 0x60000000))/* ori Ra, Rs, UIMM */
+ {
+ continue;
+ }
+ /* li r0, SIMM (short for addi r0, 0, SIMM). This is the first
+ in a pair of insns to save the vector registers on the
+ stack. */
+ /* 001110 00000 00000 iiii iiii iiii iiii */
+ else if ((op & 0xffff0000) == 0x38000000) /* li r0, SIMM */
+ {
+ li_found_pc = pc;
+ vr_saved_offset = SIGNED_SHORT (op);
+ }
+ /* Store vector register S at (r31+r0) aligned to 16 bytes. */
+ /* 011111 sssss 11111 00000 00111001110 */
+ else if ((op & 0xfc1fffff) == 0x7c1f01ce) /* stvx Vs, R31, R0 */
+ {
+ if (pc == (li_found_pc + 4))
+ {
+ vr_reg = GET_SRC_REG (op);
+ /* If this is the first vector reg to be saved, or if
+ it has a lower number than others previously seen,
+ reupdate the frame info. */
+ if (fdata->saved_vr == -1 || fdata->saved_vr > vr_reg)
+ {
+ fdata->saved_vr = vr_reg;
+ fdata->vr_offset = vr_saved_offset + offset;
+ }
+ vr_saved_offset = -1;
+ vr_reg = -1;
+ li_found_pc = 0;
+ }
+ }
+ /* End AltiVec related instructions. */
else
{
- break;
+ /* Not a recognized prologue instruction.
+ Handle optimizer code motions into the prologue by continuing
+ the search if we have no valid frame yet or if the return
+ address is not yet saved in the frame. */
+ if (fdata->frameless == 0
+ && (lr_reg == -1 || fdata->nosavedpc == 0))
+ break;
+
+ if (op == 0x4e800020 /* blr */
+ || op == 0x4e800420) /* bctr */
+ /* Do not scan past epilogue in frameless functions or
+ trampolines. */
+ break;
+ if ((op & 0xf4000000) == 0x40000000) /* bxx */
+ /* Never skip branches. */
+ break;
+
+ if (num_skip_non_prologue_insns++ > max_skip_non_prologue_insns)
+ /* Do not scan too many insns, scanning insns is expensive with
+ remote targets. */
+ break;
+
+ /* Continue scanning. */
+ prev_insn_was_prologue_insn = 0;
+ continue;
}
}
function as well. */
tmp = find_pc_misc_function (pc);
- if (tmp >= 0 && STREQ (misc_function_vector[tmp].name, "main"))
+ if (tmp >= 0 && STREQ (misc_function_vector[tmp].name, main_name ()))
return pc + 8;
}
}
#endif /* 0 */
fdata->offset = -fdata->offset;
- return pc;
+ return last_prologue_pc;
}
frames, etc.
*************************************************************************/
-/* The total size of dummy frame is 436, which is;
-
- 32 gpr's - 128 bytes
- 32 fpr's - 256 bytes
- 7 the rest - 28 bytes
- callee's link area - 24 bytes
- padding - 12 bytes
-
- Note that the last 24 bytes for the link area might not be necessary,
- since it will be taken care of by push_arguments(). */
-
-#define DUMMY_FRAME_SIZE 448
-#define DUMMY_FRAME_ADDR_SIZE 10
-
-/* Make sure you initialize these in somewhere, in case gdb gives up what it
- was debugging and starts debugging something else. FIXMEibm */
-
-static int dummy_frame_count = 0;
-static int dummy_frame_size = 0;
-static CORE_ADDR *dummy_frame_addr = 0;
-
-extern int stop_stack_dummy;
-
-/* push a dummy frame into stack, save all register. Currently we are saving
- only gpr's and fpr's, which is not good enough! FIXMEmgo */
-
-void
-push_dummy_frame ()
-{
- /* stack pointer. */
- CORE_ADDR sp;
- /* Same thing, target byte order. */
- char sp_targ[4];
-
- /* link register. */
- CORE_ADDR pc;
- /* Same thing, target byte order. */
- char pc_targ[4];
-
- /* Needed to figure out where to save the dummy link area.
- FIXME: There should be an easier way to do this, no? tiemann 9/9/95. */
- struct rs6000_framedata fdata;
-
- int ii;
-
- target_fetch_registers (-1);
-
- if (dummy_frame_count >= dummy_frame_size)
- {
- dummy_frame_size += DUMMY_FRAME_ADDR_SIZE;
- if (dummy_frame_addr)
- dummy_frame_addr = (CORE_ADDR *) xrealloc
- (dummy_frame_addr, sizeof (CORE_ADDR) * (dummy_frame_size));
- else
- dummy_frame_addr = (CORE_ADDR *)
- xmalloc (sizeof (CORE_ADDR) * (dummy_frame_size));
- }
-
- sp = read_register (SP_REGNUM);
- pc = read_register (PC_REGNUM);
- store_address (pc_targ, 4, pc);
-
- skip_prologue (get_pc_function_start (pc), &fdata);
-
- dummy_frame_addr[dummy_frame_count++] = sp;
-
- /* Be careful! If the stack pointer is not decremented first, then kernel
- thinks he is free to use the space underneath it. And kernel actually
- uses that area for IPC purposes when executing ptrace(2) calls. So
- before writing register values into the new frame, decrement and update
- %sp first in order to secure your frame. */
-
- /* FIXME: We don't check if the stack really has this much space.
- This is a problem on the ppc simulator (which only grants one page
- (4096 bytes) by default. */
-
- write_register (SP_REGNUM, sp - DUMMY_FRAME_SIZE);
-
- /* gdb relies on the state of current_frame. We'd better update it,
- otherwise things like do_registers_info() wouldn't work properly! */
-
- flush_cached_frames ();
-
- /* save program counter in link register's space. */
- write_memory (sp + (fdata.lr_offset ? fdata.lr_offset : DEFAULT_LR_SAVE),
- pc_targ, 4);
-
- /* save all floating point and general purpose registers here. */
-
- /* fpr's, f0..f31 */
- for (ii = 0; ii < 32; ++ii)
- write_memory (sp - 8 - (ii * 8), ®isters[REGISTER_BYTE (31 - ii + FP0_REGNUM)], 8);
-
- /* gpr's r0..r31 */
- for (ii = 1; ii <= 32; ++ii)
- write_memory (sp - 256 - (ii * 4), ®isters[REGISTER_BYTE (32 - ii)], 4);
-
- /* so far, 32*2 + 32 words = 384 bytes have been written.
- 7 extra registers in our register set: pc, ps, cnd, lr, cnt, xer, mq */
-
- for (ii = 1; ii <= (LAST_UISA_SP_REGNUM - FIRST_UISA_SP_REGNUM + 1); ++ii)
- {
- write_memory (sp - 384 - (ii * 4),
- ®isters[REGISTER_BYTE (FPLAST_REGNUM + ii)], 4);
- }
-
- /* Save sp or so called back chain right here. */
- store_address (sp_targ, 4, sp);
- write_memory (sp - DUMMY_FRAME_SIZE, sp_targ, 4);
- sp -= DUMMY_FRAME_SIZE;
-
- /* And finally, this is the back chain. */
- write_memory (sp + 8, pc_targ, 4);
-}
-
-
-/* Pop a dummy frame.
-
- In rs6000 when we push a dummy frame, we save all of the registers. This
- is usually done before user calls a function explicitly.
-
- After a dummy frame is pushed, some instructions are copied into stack,
- and stack pointer is decremented even more. Since we don't have a frame
- pointer to get back to the parent frame of the dummy, we start having
- trouble poping it. Therefore, we keep a dummy frame stack, keeping
- addresses of dummy frames as such. When poping happens and when we
- detect that was a dummy frame, we pop it back to its parent by using
- dummy frame stack (`dummy_frame_addr' array).
-
- FIXME: This whole concept is broken. You should be able to detect
- a dummy stack frame *on the user's stack itself*. When you do,
- then you know the format of that stack frame -- including its
- saved SP register! There should *not* be a separate stack in the
- GDB process that keeps track of these dummy frames! -- gnu@cygnus.com Aug92
- */
+/* Pop the innermost frame, go back to the caller. */
static void
-pop_dummy_frame ()
+rs6000_pop_frame (void)
{
- CORE_ADDR sp, pc;
- int ii;
- sp = dummy_frame_addr[--dummy_frame_count];
-
- /* restore all fpr's. */
- for (ii = 1; ii <= 32; ++ii)
- read_memory (sp - (ii * 8), ®isters[REGISTER_BYTE (32 - ii + FP0_REGNUM)], 8);
-
- /* restore all gpr's */
- for (ii = 1; ii <= 32; ++ii)
- {
- read_memory (sp - 256 - (ii * 4), ®isters[REGISTER_BYTE (32 - ii)], 4);
- }
-
- /* restore the rest of the registers. */
- for (ii = 1; ii <= (LAST_UISA_SP_REGNUM - FIRST_UISA_SP_REGNUM + 1); ++ii)
- read_memory (sp - 384 - (ii * 4),
- ®isters[REGISTER_BYTE (FPLAST_REGNUM + ii)], 4);
-
- read_memory (sp - (DUMMY_FRAME_SIZE - 8),
- ®isters[REGISTER_BYTE (PC_REGNUM)], 4);
-
- /* when a dummy frame was being pushed, we had to decrement %sp first, in
- order to secure astack space. Thus, saved %sp (or %r1) value, is not the
- one we should restore. Change it with the one we need. */
-
- memcpy (®isters[REGISTER_BYTE (FP_REGNUM)], (char *) &sp, sizeof (int));
-
- /* Now we can restore all registers. */
-
- target_store_registers (-1);
- pc = read_pc ();
- flush_cached_frames ();
-}
-
-
-/* pop the innermost frame, go back to the caller. */
-
-void
-pop_frame ()
-{
- CORE_ADDR pc, lr, sp, prev_sp; /* %pc, %lr, %sp */
+ CORE_ADDR pc, lr, sp, prev_sp, addr; /* %pc, %lr, %sp */
struct rs6000_framedata fdata;
struct frame_info *frame = get_current_frame ();
- int addr, ii;
+ int ii, wordsize;
pc = read_pc ();
sp = FRAME_FP (frame);
- if (stop_stack_dummy)
+ if (PC_IN_CALL_DUMMY (frame->pc, frame->frame, frame->frame))
{
- if (USE_GENERIC_DUMMY_FRAMES)
- {
- generic_pop_dummy_frame ();
- flush_cached_frames ();
- return;
- }
- else
- {
- if (dummy_frame_count)
- pop_dummy_frame ();
- return;
- }
+ generic_pop_dummy_frame ();
+ flush_cached_frames ();
+ return;
}
/* Make sure that all registers are valid. */
saved %pc value in the previous frame. */
addr = get_pc_function_start (frame->pc);
- (void) skip_prologue (addr, &fdata);
+ (void) skip_prologue (addr, frame->pc, &fdata);
+ wordsize = TDEP->wordsize;
if (fdata.frameless)
prev_sp = sp;
else
- prev_sp = read_memory_integer (sp, 4);
+ prev_sp = read_memory_addr (sp, wordsize);
if (fdata.lr_offset == 0)
- lr = read_register (LR_REGNUM);
+ lr = read_register (gdbarch_tdep (current_gdbarch)->ppc_lr_regnum);
else
- lr = read_memory_integer (prev_sp + fdata.lr_offset, 4);
+ lr = read_memory_addr (prev_sp + fdata.lr_offset, wordsize);
/* reset %pc value. */
write_register (PC_REGNUM, lr);
addr = prev_sp + fdata.gpr_offset;
for (ii = fdata.saved_gpr; ii <= 31; ++ii)
{
- read_memory (addr, ®isters[REGISTER_BYTE (ii)], 4);
- addr += 4;
+ read_memory (addr, ®isters[REGISTER_BYTE (ii)], wordsize);
+ addr += wordsize;
}
}
flush_cached_frames ();
}
-/* fixup the call sequence of a dummy function, with the real function address.
- its argumets will be passed by gdb. */
-
-void
-rs6000_fix_call_dummy (dummyname, pc, fun, nargs, args, type, gcc_p)
- char *dummyname;
- CORE_ADDR pc;
- CORE_ADDR fun;
- int nargs;
- value_ptr *args;
- struct type *type;
- int gcc_p;
-{
-#define TOC_ADDR_OFFSET 20
-#define TARGET_ADDR_OFFSET 28
+/* Fixup the call sequence of a dummy function, with the real function
+ address. Its arguments will be passed by gdb. */
+static void
+rs6000_fix_call_dummy (char *dummyname, CORE_ADDR pc, CORE_ADDR fun,
+ int nargs, struct value **args, struct type *type,
+ int gcc_p)
+{
int ii;
CORE_ADDR target_addr;
- if (USE_GENERIC_DUMMY_FRAMES)
+ if (rs6000_find_toc_address_hook != NULL)
{
- if (find_toc_address_hook != NULL)
- {
- CORE_ADDR tocvalue = (*find_toc_address_hook) (fun);
- write_register (TOC_REGNUM, tocvalue);
- }
- }
- else
- {
- if (find_toc_address_hook != NULL)
- {
- CORE_ADDR tocvalue;
-
- tocvalue = (*find_toc_address_hook) (fun);
- ii = *(int *) ((char *) dummyname + TOC_ADDR_OFFSET);
- ii = (ii & 0xffff0000) | (tocvalue >> 16);
- *(int *) ((char *) dummyname + TOC_ADDR_OFFSET) = ii;
-
- ii = *(int *) ((char *) dummyname + TOC_ADDR_OFFSET + 4);
- ii = (ii & 0xffff0000) | (tocvalue & 0x0000ffff);
- *(int *) ((char *) dummyname + TOC_ADDR_OFFSET + 4) = ii;
- }
-
- target_addr = fun;
- ii = *(int *) ((char *) dummyname + TARGET_ADDR_OFFSET);
- ii = (ii & 0xffff0000) | (target_addr >> 16);
- *(int *) ((char *) dummyname + TARGET_ADDR_OFFSET) = ii;
-
- ii = *(int *) ((char *) dummyname + TARGET_ADDR_OFFSET + 4);
- ii = (ii & 0xffff0000) | (target_addr & 0x0000ffff);
- *(int *) ((char *) dummyname + TARGET_ADDR_OFFSET + 4) = ii;
+ CORE_ADDR tocvalue = (*rs6000_find_toc_address_hook) (fun);
+ write_register (gdbarch_tdep (current_gdbarch)->ppc_toc_regnum,
+ tocvalue);
}
}
-/* Pass the arguments in either registers, or in the stack. In RS6000,
+/* Pass the arguments in either registers, or in the stack. In RS/6000,
the first eight words of the argument list (that might be less than
eight parameters if some parameters occupy more than one word) are
- passed in r3..r11 registers. float and double parameters are
+ passed in r3..r10 registers. float and double parameters are
passed in fpr's, in addition to that. Rest of the parameters if any
are passed in user stack. There might be cases in which half of the
parameter is copied into registers, the other half is pushed into
stack.
+ Stack must be aligned on 64-bit boundaries when synthesizing
+ function calls.
+
If the function is returning a structure, then the return address is passed
in r3, then the first 7 words of the parameters can be passed in registers,
starting from r4. */
-CORE_ADDR
-rs6000_push_arguments (nargs, args, sp, struct_return, struct_addr)
- int nargs;
- value_ptr *args;
- CORE_ADDR sp;
- int struct_return;
- CORE_ADDR struct_addr;
+static CORE_ADDR
+rs6000_push_arguments (int nargs, struct value **args, CORE_ADDR sp,
+ int struct_return, CORE_ADDR struct_addr)
{
int ii;
int len = 0;
int argbytes; /* current argument byte */
char tmp_buffer[50];
int f_argno = 0; /* current floating point argno */
+ int wordsize = TDEP->wordsize;
- value_ptr arg = 0;
+ struct value *arg = 0;
struct type *type;
CORE_ADDR saved_sp;
- if (!USE_GENERIC_DUMMY_FRAMES)
- {
- if (dummy_frame_count <= 0)
- printf_unfiltered ("FATAL ERROR -push_arguments()! frame not found!!\n");
- }
-
/* The first eight words of ther arguments are passed in registers. Copy
them appropriately.
}
else
{ /* Argument can fit in one register. No problem. */
- int adj = TARGET_BYTE_ORDER == BIG_ENDIAN ? reg_size - len : 0;
+ int adj = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? reg_size - len : 0;
memset (®isters[REGISTER_BYTE (ii + 3)], 0, reg_size);
memcpy ((char *)®isters[REGISTER_BYTE (ii + 3)] + adj,
VALUE_CONTENTS (arg), len);
ran_out_of_registers_for_arguments:
- if (USE_GENERIC_DUMMY_FRAMES)
- {
- saved_sp = read_sp ();
-#ifndef ELF_OBJECT_FORMAT
- /* location for 8 parameters are always reserved. */
- sp -= 4 * 8;
+ saved_sp = read_sp ();
- /* another six words for back chain, TOC register, link register, etc. */
- sp -= 24;
+ /* location for 8 parameters are always reserved. */
+ sp -= wordsize * 8;
- /* stack pointer must be quadword aligned */
- sp &= -16;
-#endif
- }
- else
- {
- /* location for 8 parameters are always reserved. */
- sp -= 4 * 8;
+ /* another six words for back chain, TOC register, link register, etc. */
+ sp -= wordsize * 6;
- /* another six words for back chain, TOC register, link register, etc. */
- sp -= 24;
-
- /* stack pointer must be quadword aligned */
- sp &= -16;
- }
+ /* stack pointer must be quadword aligned */
+ sp &= -16;
/* if there are more arguments, allocate space for them in
the stack, then push them starting from the ninth one. */
for (; jj < nargs; ++jj)
{
- value_ptr val = args[jj];
+ struct value *val = args[jj];
space += ((TYPE_LENGTH (VALUE_TYPE (val))) + 3) & -4;
}
/* Secure stack areas first, before doing anything else. */
write_register (SP_REGNUM, sp);
- if (!USE_GENERIC_DUMMY_FRAMES)
- {
- /* we want to copy 24 bytes of target's frame to dummy's frame,
- then set back chain to point to new frame. */
-
- saved_sp = dummy_frame_addr[dummy_frame_count - 1];
- read_memory (saved_sp, tmp_buffer, 24);
- write_memory (sp, tmp_buffer, 24);
- }
-
/* set back chain properly */
store_address (tmp_buffer, 4, saved_sp);
write_memory (sp, tmp_buffer, 4);
target_store_registers (-1);
return sp;
}
-/* #ifdef ELF_OBJECT_FORMAT */
/* Function: ppc_push_return_address (pc, sp)
Set up the return address for the inferior function call. */
-CORE_ADDR
-ppc_push_return_address (pc, sp)
- CORE_ADDR pc;
- CORE_ADDR sp;
+static CORE_ADDR
+ppc_push_return_address (CORE_ADDR pc, CORE_ADDR sp)
{
- write_register (LR_REGNUM, CALL_DUMMY_ADDRESS ());
+ write_register (gdbarch_tdep (current_gdbarch)->ppc_lr_regnum,
+ CALL_DUMMY_ADDRESS ());
return sp;
}
-/* #endif */
+/* Extract a function return value of type TYPE from raw register array
+ REGBUF, and copy that return value into VALBUF in virtual format. */
-/* a given return value in `regbuf' with a type `valtype', extract and copy its
- value into `valbuf' */
-
-void
-extract_return_value (valtype, regbuf, valbuf)
- struct type *valtype;
- char regbuf[REGISTER_BYTES];
- char *valbuf;
+static void
+rs6000_extract_return_value (struct type *valtype, char *regbuf, char *valbuf)
{
int offset = 0;
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
if (TYPE_CODE (valtype) == TYPE_CODE_FLT)
{
memcpy (valbuf, &ff, sizeof (float));
}
}
+ else if (TYPE_CODE (valtype) == TYPE_CODE_ARRAY
+ && TYPE_LENGTH (valtype) == 16
+ && TYPE_VECTOR (valtype))
+ {
+ memcpy (valbuf, regbuf + REGISTER_BYTE (tdep->ppc_vr0_regnum + 2),
+ TYPE_LENGTH (valtype));
+ }
else
{
/* return value is copied starting from r3. */
- if (TARGET_BYTE_ORDER == BIG_ENDIAN
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
&& TYPE_LENGTH (valtype) < REGISTER_RAW_SIZE (3))
offset = REGISTER_RAW_SIZE (3) - TYPE_LENGTH (valtype);
}
}
-
-/* keep structure return address in this variable.
+/* Keep structure return address in this variable.
FIXME: This is a horrid kludge which should not be allowed to continue
living. This only allows a single nested call to a structure-returning
function. Come on, guys! -- gnu@cygnus.com, Aug 92 */
-CORE_ADDR rs6000_struct_return_address;
+static CORE_ADDR rs6000_struct_return_address;
+
+/* Return whether handle_inferior_event() should proceed through code
+ starting at PC in function NAME when stepping.
+
+ The AIX -bbigtoc linker option generates functions @FIX0, @FIX1, etc. to
+ handle memory references that are too distant to fit in instructions
+ generated by the compiler. For example, if 'foo' in the following
+ instruction:
+
+ lwz r9,foo(r2)
+
+ is greater than 32767, the linker might replace the lwz with a branch to
+ somewhere in @FIX1 that does the load in 2 instructions and then branches
+ back to where execution should continue.
+
+ GDB should silently step over @FIX code, just like AIX dbx does.
+ Unfortunately, the linker uses the "b" instruction for the branches,
+ meaning that the link register doesn't get set. Therefore, GDB's usual
+ step_over_function() mechanism won't work.
+ Instead, use the IN_SOLIB_RETURN_TRAMPOLINE and SKIP_TRAMPOLINE_CODE hooks
+ in handle_inferior_event() to skip past @FIX code. */
-/* Indirect function calls use a piece of trampoline code to do context
- switching, i.e. to set the new TOC table. Skip such code if we are on
- its first instruction (as when we have single-stepped to here).
- Also skip shared library trampoline code (which is different from
+int
+rs6000_in_solib_return_trampoline (CORE_ADDR pc, char *name)
+{
+ return name && !strncmp (name, "@FIX", 4);
+}
+
+/* Skip code that the user doesn't want to see when stepping:
+
+ 1. Indirect function calls use a piece of trampoline code to do context
+ switching, i.e. to set the new TOC table. Skip such code if we are on
+ its first instruction (as when we have single-stepped to here).
+
+ 2. Skip shared library trampoline code (which is different from
indirect function call trampolines).
+
+ 3. Skip bigtoc fixup code.
+
Result is desired PC to step until, or NULL if we are not in
- trampoline code. */
+ code that should be skipped. */
CORE_ADDR
-skip_trampoline_code (pc)
- CORE_ADDR pc;
+rs6000_skip_trampoline_code (CORE_ADDR pc)
{
register unsigned int ii, op;
+ int rel;
CORE_ADDR solib_target_pc;
+ struct minimal_symbol *msymbol;
static unsigned trampoline_code[] =
{
0
};
+ /* Check for bigtoc fixup code. */
+ msymbol = lookup_minimal_symbol_by_pc (pc);
+ if (msymbol && rs6000_in_solib_return_trampoline (pc, SYMBOL_NAME (msymbol)))
+ {
+ /* Double-check that the third instruction from PC is relative "b". */
+ op = read_memory_integer (pc + 8, 4);
+ if ((op & 0xfc000003) == 0x48000000)
+ {
+ /* Extract bits 6-29 as a signed 24-bit relative word address and
+ add it to the containing PC. */
+ rel = ((int)(op << 6) >> 6);
+ return pc + 8 + rel;
+ }
+ }
+
/* If pc is in a shared library trampoline, return its target. */
solib_target_pc = find_solib_trampoline_target (pc);
if (solib_target_pc)
return 0;
}
ii = read_register (11); /* r11 holds destination addr */
- pc = read_memory_integer (ii, 4); /* (r11) value */
+ pc = read_memory_addr (ii, TDEP->wordsize); /* (r11) value */
return pc;
}
return 0;
}
- (void) skip_prologue (func_start, &fdata);
+ (void) skip_prologue (func_start, fi->pc, &fdata);
return fdata.frameless;
}
/* Return the PC saved in a frame */
-unsigned long
+CORE_ADDR
rs6000_frame_saved_pc (struct frame_info *fi)
{
CORE_ADDR func_start;
struct rs6000_framedata fdata;
+ struct gdbarch_tdep *tdep = TDEP;
+ int wordsize = tdep->wordsize;
if (fi->signal_handler_caller)
- return read_memory_integer (fi->frame + SIG_FRAME_PC_OFFSET, 4);
+ return read_memory_addr (fi->frame + SIG_FRAME_PC_OFFSET, wordsize);
- if (USE_GENERIC_DUMMY_FRAMES)
- {
- if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
- return generic_read_register_dummy (fi->pc, fi->frame, PC_REGNUM);
- }
+ if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
+ return generic_read_register_dummy (fi->pc, fi->frame, PC_REGNUM);
func_start = get_pc_function_start (fi->pc);
if (!func_start)
return 0;
- (void) skip_prologue (func_start, &fdata);
+ (void) skip_prologue (func_start, fi->pc, &fdata);
if (fdata.lr_offset == 0 && fi->next != NULL)
{
if (fi->next->signal_handler_caller)
- return read_memory_integer (fi->next->frame + SIG_FRAME_LR_OFFSET, 4);
+ return read_memory_addr (fi->next->frame + SIG_FRAME_LR_OFFSET,
+ wordsize);
else
- return read_memory_integer (FRAME_CHAIN (fi) + DEFAULT_LR_SAVE, 4);
+ return read_memory_addr (FRAME_CHAIN (fi) + tdep->lr_frame_offset,
+ wordsize);
}
if (fdata.lr_offset == 0)
- return read_register (LR_REGNUM);
+ return read_register (gdbarch_tdep (current_gdbarch)->ppc_lr_regnum);
- return read_memory_integer (FRAME_CHAIN (fi) + fdata.lr_offset, 4);
+ return read_memory_addr (FRAME_CHAIN (fi) + fdata.lr_offset, wordsize);
}
/* If saved registers of frame FI are not known yet, read and cache them.
in which case the framedata are read. */
static void
-frame_get_saved_regs (fi, fdatap)
- struct frame_info *fi;
- struct rs6000_framedata *fdatap;
+frame_get_saved_regs (struct frame_info *fi, struct rs6000_framedata *fdatap)
{
CORE_ADDR frame_addr;
struct rs6000_framedata work_fdata;
+ struct gdbarch_tdep * tdep = gdbarch_tdep (current_gdbarch);
+ int wordsize = tdep->wordsize;
if (fi->saved_regs)
return;
if (fdatap == NULL)
{
fdatap = &work_fdata;
- (void) skip_prologue (get_pc_function_start (fi->pc), fdatap);
+ (void) skip_prologue (get_pc_function_start (fi->pc), fi->pc, fdatap);
}
frame_saved_regs_zalloc (fi);
/* The following is true only if the frame doesn't have a call to
alloca(), FIXME. */
- if (fdatap->saved_fpr == 0 && fdatap->saved_gpr == 0
- && fdatap->lr_offset == 0 && fdatap->cr_offset == 0)
+ if (fdatap->saved_fpr == 0
+ && fdatap->saved_gpr == 0
+ && fdatap->saved_vr == 0
+ && fdatap->lr_offset == 0
+ && fdatap->cr_offset == 0
+ && fdatap->vr_offset == 0)
frame_addr = 0;
- else if (fi->prev && fi->prev->frame)
- frame_addr = fi->prev->frame;
else
- frame_addr = read_memory_integer (fi->frame, 4);
+ /* NOTE: cagney/2002-04-14: The ->frame points to the inner-most
+ address of the current frame. Things might be easier if the
+ ->frame pointed to the outer-most address of the frame. In the
+ mean time, the address of the prev frame is used as the base
+ address of this frame. */
+ frame_addr = FRAME_CHAIN (fi);
/* if != -1, fdatap->saved_fpr is the smallest number of saved_fpr.
All fpr's from saved_fpr to fp31 are saved. */
if (fdatap->saved_fpr >= 0)
{
int i;
- int fpr_offset = frame_addr + fdatap->fpr_offset;
+ CORE_ADDR fpr_addr = frame_addr + fdatap->fpr_offset;
for (i = fdatap->saved_fpr; i < 32; i++)
{
- fi->saved_regs[FP0_REGNUM + i] = fpr_offset;
- fpr_offset += 8;
+ fi->saved_regs[FP0_REGNUM + i] = fpr_addr;
+ fpr_addr += 8;
}
}
if (fdatap->saved_gpr >= 0)
{
int i;
- int gpr_offset = frame_addr + fdatap->gpr_offset;
+ CORE_ADDR gpr_addr = frame_addr + fdatap->gpr_offset;
for (i = fdatap->saved_gpr; i < 32; i++)
{
- fi->saved_regs[i] = gpr_offset;
- gpr_offset += 4;
+ fi->saved_regs[i] = gpr_addr;
+ gpr_addr += wordsize;
+ }
+ }
+
+ /* if != -1, fdatap->saved_vr is the smallest number of saved_vr.
+ All vr's from saved_vr to vr31 are saved. */
+ if (tdep->ppc_vr0_regnum != -1 && tdep->ppc_vrsave_regnum != -1)
+ {
+ if (fdatap->saved_vr >= 0)
+ {
+ int i;
+ CORE_ADDR vr_addr = frame_addr + fdatap->vr_offset;
+ for (i = fdatap->saved_vr; i < 32; i++)
+ {
+ fi->saved_regs[tdep->ppc_vr0_regnum + i] = vr_addr;
+ vr_addr += REGISTER_RAW_SIZE (tdep->ppc_vr0_regnum);
+ }
}
}
/* If != 0, fdatap->cr_offset is the offset from the frame that holds
the CR. */
if (fdatap->cr_offset != 0)
- fi->saved_regs[CR_REGNUM] = frame_addr + fdatap->cr_offset;
+ fi->saved_regs[tdep->ppc_cr_regnum] = frame_addr + fdatap->cr_offset;
/* If != 0, fdatap->lr_offset is the offset from the frame that holds
the LR. */
if (fdatap->lr_offset != 0)
- fi->saved_regs[LR_REGNUM] = frame_addr + fdatap->lr_offset;
+ fi->saved_regs[tdep->ppc_lr_regnum] = frame_addr + fdatap->lr_offset;
+
+ /* If != 0, fdatap->vrsave_offset is the offset from the frame that holds
+ the VRSAVE. */
+ if (fdatap->vrsave_offset != 0)
+ fi->saved_regs[tdep->ppc_vrsave_regnum] = frame_addr + fdatap->vrsave_offset;
}
/* Return the address of a frame. This is the inital %sp value when the frame
an alloca register. */
static CORE_ADDR
-frame_initial_stack_address (fi)
- struct frame_info *fi;
+frame_initial_stack_address (struct frame_info *fi)
{
CORE_ADDR tmpaddr;
struct rs6000_framedata fdata;
/* find out if this function is using an alloca register.. */
- (void) skip_prologue (get_pc_function_start (fi->pc), &fdata);
+ (void) skip_prologue (get_pc_function_start (fi->pc), fi->pc, &fdata);
/* if saved registers of this frame are not known yet, read and cache them. */
return fi->extra_info->initial_sp;
}
- /* This function has an alloca register. If this is the top-most frame
- (with the lowest address), the value in alloca register is good. */
-
- if (!fi->next)
- return fi->extra_info->initial_sp = read_register (fdata.alloca_reg);
-
- /* Otherwise, this is a caller frame. Callee has usually already saved
- registers, but there are exceptions (such as when the callee
- has no parameters). Find the address in which caller's alloca
- register is saved. */
-
- for (callee_fi = fi->next; callee_fi; callee_fi = callee_fi->next)
- {
-
- if (!callee_fi->saved_regs)
- frame_get_saved_regs (callee_fi, NULL);
-
- /* this is the address in which alloca register is saved. */
-
- tmpaddr = callee_fi->saved_regs[fdata.alloca_reg];
- if (tmpaddr)
- {
- fi->extra_info->initial_sp = read_memory_integer (tmpaddr, 4);
- return fi->extra_info->initial_sp;
- }
+ /* There is an alloca register, use its value, in the current frame,
+ as the initial stack pointer. */
+ {
+ char *tmpbuf = alloca (MAX_REGISTER_RAW_SIZE);
+ if (frame_register_read (fi, fdata.alloca_reg, tmpbuf))
+ {
+ fi->extra_info->initial_sp
+ = extract_unsigned_integer (tmpbuf,
+ REGISTER_RAW_SIZE (fdata.alloca_reg));
+ }
+ else
+ /* NOTE: cagney/2002-04-17: At present the only time
+ frame_register_read will fail is when the register isn't
+ available. If that does happen, use the frame. */
+ fi->extra_info->initial_sp = fi->frame;
+ }
+ return fi->extra_info->initial_sp;
+}
- /* Go look into deeper levels of the frame chain to see if any one of
- the callees has saved alloca register. */
- }
+/* Describe the pointer in each stack frame to the previous stack frame
+ (its caller). */
- /* If alloca register was not saved, by the callee (or any of its callees)
- then the value in the register is still good. */
+/* FRAME_CHAIN takes a frame's nominal address
+ and produces the frame's chain-pointer. */
- fi->extra_info->initial_sp = read_register (fdata.alloca_reg);
- return fi->extra_info->initial_sp;
-}
+/* In the case of the RS/6000, the frame's nominal address
+ is the address of a 4-byte word containing the calling frame's address. */
CORE_ADDR
-rs6000_frame_chain (thisframe)
- struct frame_info *thisframe;
+rs6000_frame_chain (struct frame_info *thisframe)
{
- CORE_ADDR fp;
+ CORE_ADDR fp, fpp, lr;
+ int wordsize = TDEP->wordsize;
- if (USE_GENERIC_DUMMY_FRAMES)
- {
- if (PC_IN_CALL_DUMMY (thisframe->pc, thisframe->frame, thisframe->frame))
- return thisframe->frame; /* dummy frame same as caller's frame */
- }
+ if (PC_IN_CALL_DUMMY (thisframe->pc, thisframe->frame, thisframe->frame))
+ return thisframe->frame; /* dummy frame same as caller's frame */
if (inside_entry_file (thisframe->pc) ||
thisframe->pc == entry_point_address ())
return 0;
if (thisframe->signal_handler_caller)
- fp = read_memory_integer (thisframe->frame + SIG_FRAME_FP_OFFSET, 4);
+ fp = read_memory_addr (thisframe->frame + SIG_FRAME_FP_OFFSET,
+ wordsize);
else if (thisframe->next != NULL
&& thisframe->next->signal_handler_caller
&& FRAMELESS_FUNCTION_INVOCATION (thisframe))
frame pointer. */
fp = FRAME_FP (thisframe);
else
- fp = read_memory_integer ((thisframe)->frame, 4);
+ fp = read_memory_addr ((thisframe)->frame, wordsize);
- if (USE_GENERIC_DUMMY_FRAMES)
+ lr = read_register (gdbarch_tdep (current_gdbarch)->ppc_lr_regnum);
+ if (lr == entry_point_address ())
+ if (fp != 0 && (fpp = read_memory_addr (fp, wordsize)) != 0)
+ if (PC_IN_CALL_DUMMY (lr, fpp, fpp))
+ return fpp;
+
+ return fp;
+}
+
+/* Return the size of register REG when words are WORDSIZE bytes long. If REG
+ isn't available with that word size, return 0. */
+
+static int
+regsize (const struct reg *reg, int wordsize)
+{
+ return wordsize == 8 ? reg->sz64 : reg->sz32;
+}
+
+/* Return the name of register number N, or null if no such register exists
+ in the current architecture. */
+
+static char *
+rs6000_register_name (int n)
+{
+ struct gdbarch_tdep *tdep = TDEP;
+ const struct reg *reg = tdep->regs + n;
+
+ if (!regsize (reg, tdep->wordsize))
+ return NULL;
+ return reg->name;
+}
+
+/* Index within `registers' of the first byte of the space for
+ register N. */
+
+static int
+rs6000_register_byte (int n)
+{
+ return TDEP->regoff[n];
+}
+
+/* Return the number of bytes of storage in the actual machine representation
+ for register N if that register is available, else return 0. */
+
+static int
+rs6000_register_raw_size (int n)
+{
+ struct gdbarch_tdep *tdep = TDEP;
+ const struct reg *reg = tdep->regs + n;
+ return regsize (reg, tdep->wordsize);
+}
+
+/* Return the GDB type object for the "standard" data type
+ of data in register N. */
+
+static struct type *
+rs6000_register_virtual_type (int n)
+{
+ struct gdbarch_tdep *tdep = TDEP;
+ const struct reg *reg = tdep->regs + n;
+
+ if (reg->fpr)
+ return builtin_type_double;
+ else
{
- CORE_ADDR fpp, lr;
+ int size = regsize (reg, tdep->wordsize);
+ switch (size)
+ {
+ case 8:
+ return builtin_type_int64;
+ break;
+ case 16:
+ return builtin_type_vec128;
+ break;
+ default:
+ return builtin_type_int32;
+ break;
+ }
+ }
+}
+
+/* For the PowerPC, it appears that the debug info marks float parameters as
+ floats regardless of whether the function is prototyped, but the actual
+ values are always passed in as doubles. Tell gdb to always assume that
+ floats are passed as doubles and then converted in the callee. */
+
+static int
+rs6000_coerce_float_to_double (struct type *formal, struct type *actual)
+{
+ return 1;
+}
+
+/* Return whether register N requires conversion when moving from raw format
+ to virtual format.
+
+ The register format for RS/6000 floating point registers is always
+ double, we need a conversion if the memory format is float. */
+
+static int
+rs6000_register_convertible (int n)
+{
+ const struct reg *reg = TDEP->regs + n;
+ return reg->fpr;
+}
- lr = read_register (LR_REGNUM);
- if (lr == entry_point_address ())
- if (fp != 0 && (fpp = read_memory_integer (fp, 4)) != 0)
- if (PC_IN_CALL_DUMMY (lr, fpp, fpp))
- return fpp;
+/* Convert data from raw format for register N in buffer FROM
+ to virtual format with type TYPE in buffer TO. */
+
+static void
+rs6000_register_convert_to_virtual (int n, struct type *type,
+ char *from, char *to)
+{
+ if (TYPE_LENGTH (type) != REGISTER_RAW_SIZE (n))
+ {
+ double val = extract_floating (from, REGISTER_RAW_SIZE (n));
+ store_floating (to, TYPE_LENGTH (type), val);
}
+ else
+ memcpy (to, from, REGISTER_RAW_SIZE (n));
+}
- return fp;
+/* Convert data from virtual format with type TYPE in buffer FROM
+ to raw format for register N in buffer TO. */
+
+static void
+rs6000_register_convert_to_raw (struct type *type, int n,
+ char *from, char *to)
+{
+ if (TYPE_LENGTH (type) != REGISTER_RAW_SIZE (n))
+ {
+ double val = extract_floating (from, TYPE_LENGTH (type));
+ store_floating (to, REGISTER_RAW_SIZE (n), val);
+ }
+ else
+ memcpy (to, from, REGISTER_RAW_SIZE (n));
}
-\f
-/* Return nonzero if ADDR (a function pointer) is in the data space and
- is therefore a special function pointer. */
int
-is_magic_function_pointer (addr)
- CORE_ADDR addr;
+altivec_register_p (int regno)
{
- struct obj_section *s;
-
- s = find_pc_section (addr);
- if (s && s->the_bfd_section->flags & SEC_CODE)
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ if (tdep->ppc_vr0_regnum < 0 || tdep->ppc_vrsave_regnum < 0)
return 0;
else
- return 1;
+ return (regno >= tdep->ppc_vr0_regnum && regno <= tdep->ppc_vrsave_regnum);
}
-#ifdef GDB_TARGET_POWERPC
-int
-gdb_print_insn_powerpc (memaddr, info)
- bfd_vma memaddr;
- disassemble_info *info;
+static void
+rs6000_do_altivec_registers (int regnum)
+{
+ int i;
+ char *raw_buffer = (char*) alloca (MAX_REGISTER_RAW_SIZE);
+ char *virtual_buffer = (char*) alloca (MAX_REGISTER_VIRTUAL_SIZE);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+
+ for (i = tdep->ppc_vr0_regnum; i <= tdep->ppc_vrsave_regnum; i++)
+ {
+ /* If we want just one reg, check that this is the one we want. */
+ if (regnum != -1 && i != regnum)
+ continue;
+
+ /* If the register name is empty, it is undefined for this
+ processor, so don't display anything. */
+ if (REGISTER_NAME (i) == NULL || *(REGISTER_NAME (i)) == '\0')
+ continue;
+
+ fputs_filtered (REGISTER_NAME (i), gdb_stdout);
+ print_spaces_filtered (15 - strlen (REGISTER_NAME (i)), gdb_stdout);
+
+ /* Get the data in raw format. */
+ if (!frame_register_read (selected_frame, i, raw_buffer))
+ {
+ printf_filtered ("*value not available*\n");
+ continue;
+ }
+
+ /* Convert raw data to virtual format if necessary. */
+ if (REGISTER_CONVERTIBLE (i))
+ REGISTER_CONVERT_TO_VIRTUAL (i, REGISTER_VIRTUAL_TYPE (i),
+ raw_buffer, virtual_buffer);
+ else
+ memcpy (virtual_buffer, raw_buffer, REGISTER_VIRTUAL_SIZE (i));
+
+ /* Print as integer in hex only. */
+ val_print (REGISTER_VIRTUAL_TYPE (i), virtual_buffer, 0, 0,
+ gdb_stdout, 'x', 1, 0, Val_pretty_default);
+ printf_filtered ("\n");
+ }
+}
+
+static void
+rs6000_altivec_registers_info (char *addr_exp, int from_tty)
+{
+ int regnum, numregs;
+ register char *end;
+
+ if (!target_has_registers)
+ error ("The program has no registers now.");
+ if (selected_frame == NULL)
+ error ("No selected frame.");
+
+ if (!addr_exp)
+ {
+ rs6000_do_altivec_registers (-1);
+ return;
+ }
+
+ numregs = NUM_REGS + NUM_PSEUDO_REGS;
+ do
+ {
+ if (addr_exp[0] == '$')
+ addr_exp++;
+ end = addr_exp;
+ while (*end != '\0' && *end != ' ' && *end != '\t')
+ ++end;
+
+ regnum = target_map_name_to_register (addr_exp, end - addr_exp);
+ if (regnum < 0)
+ {
+ regnum = numregs;
+ if (*addr_exp >= '0' && *addr_exp <= '9')
+ regnum = atoi (addr_exp); /* Take a number */
+ if (regnum >= numregs) /* Bad name, or bad number */
+ error ("%.*s: invalid register", end - addr_exp, addr_exp);
+ }
+
+ rs6000_do_altivec_registers (regnum);
+
+ addr_exp = end;
+ while (*addr_exp == ' ' || *addr_exp == '\t')
+ ++addr_exp;
+ }
+ while (*addr_exp != '\0');
+}
+
+static void
+rs6000_do_registers_info (int regnum, int fpregs)
+{
+ register int i;
+ int numregs = NUM_REGS + NUM_PSEUDO_REGS;
+ char *raw_buffer = (char*) alloca (MAX_REGISTER_RAW_SIZE);
+ char *virtual_buffer = (char*) alloca (MAX_REGISTER_VIRTUAL_SIZE);
+
+ for (i = 0; i < numregs; i++)
+ {
+ /* Decide between printing all regs, nonfloat regs, or specific reg. */
+ if (regnum == -1)
+ {
+ if ((TYPE_CODE (REGISTER_VIRTUAL_TYPE (i)) == TYPE_CODE_FLT && !fpregs)
+ || (altivec_register_p (i) && !fpregs))
+ continue;
+ }
+ else
+ {
+ if (i != regnum)
+ continue;
+ }
+
+ /* If the register name is empty, it is undefined for this
+ processor, so don't display anything. */
+ if (REGISTER_NAME (i) == NULL || *(REGISTER_NAME (i)) == '\0')
+ continue;
+
+ fputs_filtered (REGISTER_NAME (i), gdb_stdout);
+ print_spaces_filtered (15 - strlen (REGISTER_NAME (i)), gdb_stdout);
+
+ /* Get the data in raw format. */
+ if (!frame_register_read (selected_frame, i, raw_buffer))
+ {
+ printf_filtered ("*value not available*\n");
+ continue;
+ }
+
+ /* Convert raw data to virtual format if necessary. */
+ if (REGISTER_CONVERTIBLE (i))
+ REGISTER_CONVERT_TO_VIRTUAL (i, REGISTER_VIRTUAL_TYPE (i),
+ raw_buffer, virtual_buffer);
+ else
+ memcpy (virtual_buffer, raw_buffer, REGISTER_VIRTUAL_SIZE (i));
+
+ /* If virtual format is floating, print it that way, and in raw hex. */
+ if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (i)) == TYPE_CODE_FLT)
+ {
+ register int j;
+
+ val_print (REGISTER_VIRTUAL_TYPE (i), virtual_buffer, 0, 0,
+ gdb_stdout, 0, 1, 0, Val_pretty_default);
+
+ printf_filtered ("\t(raw 0x");
+ for (j = 0; j < REGISTER_RAW_SIZE (i); j++)
+ {
+ register int idx = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? j
+ : REGISTER_RAW_SIZE (i) - 1 - j;
+ printf_filtered ("%02x", (unsigned char) raw_buffer[idx]);
+ }
+ printf_filtered (")");
+ }
+ else
+ {
+ /* Print as integer in hex and in decimal. */
+ if (!altivec_register_p (i))
+ {
+ val_print (REGISTER_VIRTUAL_TYPE (i), virtual_buffer, 0, 0,
+ gdb_stdout, 'x', 1, 0, Val_pretty_default);
+ printf_filtered ("\t");
+ val_print (REGISTER_VIRTUAL_TYPE (i), virtual_buffer, 0, 0,
+ gdb_stdout, 0, 1, 0, Val_pretty_default);
+ }
+ else
+ /* Print as integer in hex only. */
+ val_print (REGISTER_VIRTUAL_TYPE (i), virtual_buffer, 0, 0,
+ gdb_stdout, 'x', 1, 0, Val_pretty_default);
+ }
+ printf_filtered ("\n");
+ }
+}
+
+/* Convert a dbx stab register number (from `r' declaration) to a gdb
+ REGNUM. */
+static int
+rs6000_stab_reg_to_regnum (int num)
+{
+ int regnum;
+ switch (num)
+ {
+ case 64:
+ regnum = gdbarch_tdep (current_gdbarch)->ppc_mq_regnum;
+ break;
+ case 65:
+ regnum = gdbarch_tdep (current_gdbarch)->ppc_lr_regnum;
+ break;
+ case 66:
+ regnum = gdbarch_tdep (current_gdbarch)->ppc_ctr_regnum;
+ break;
+ case 76:
+ regnum = gdbarch_tdep (current_gdbarch)->ppc_xer_regnum;
+ break;
+ default:
+ regnum = num;
+ break;
+ }
+ return regnum;
+}
+
+/* Store the address of the place in which to copy the structure the
+ subroutine will return. This is called from call_function.
+
+ In RS/6000, struct return addresses are passed as an extra parameter in r3.
+ In function return, callee is not responsible of returning this address
+ back. Since gdb needs to find it, we will store in a designated variable
+ `rs6000_struct_return_address'. */
+
+static void
+rs6000_store_struct_return (CORE_ADDR addr, CORE_ADDR sp)
+{
+ write_register (3, addr);
+ rs6000_struct_return_address = addr;
+}
+
+/* Write into appropriate registers a function return value
+ of type TYPE, given in virtual format. */
+
+static void
+rs6000_store_return_value (struct type *type, char *valbuf)
{
- if (TARGET_BYTE_ORDER == BIG_ENDIAN)
- return print_insn_big_powerpc (memaddr, info);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+
+ if (TYPE_CODE (type) == TYPE_CODE_FLT)
+
+ /* Floating point values are returned starting from FPR1 and up.
+ Say a double_double_double type could be returned in
+ FPR1/FPR2/FPR3 triple. */
+
+ write_register_bytes (REGISTER_BYTE (FP0_REGNUM + 1), valbuf,
+ TYPE_LENGTH (type));
+ else if (TYPE_CODE (type) == TYPE_CODE_ARRAY)
+ {
+ if (TYPE_LENGTH (type) == 16
+ && TYPE_VECTOR (type))
+ write_register_bytes (REGISTER_BYTE (tdep->ppc_vr0_regnum + 2),
+ valbuf, TYPE_LENGTH (type));
+ }
else
- return print_insn_little_powerpc (memaddr, info);
+ /* Everything else is returned in GPR3 and up. */
+ write_register_bytes (REGISTER_BYTE (gdbarch_tdep (current_gdbarch)->ppc_gp0_regnum + 3),
+ valbuf, TYPE_LENGTH (type));
+}
+
+/* Extract from an array REGBUF containing the (raw) register state
+ the address in which a function should return its structure value,
+ as a CORE_ADDR (or an expression that can be used as one). */
+
+static CORE_ADDR
+rs6000_extract_struct_value_address (char *regbuf)
+{
+ return rs6000_struct_return_address;
+}
+
+/* Return whether PC is in a dummy function call.
+
+ FIXME: This just checks for the end of the stack, which is broken
+ for things like stepping through gcc nested function stubs. */
+
+static int
+rs6000_pc_in_call_dummy (CORE_ADDR pc, CORE_ADDR sp, CORE_ADDR fp)
+{
+ return sp < pc && pc < fp;
+}
+
+/* Hook called when a new child process is started. */
+
+void
+rs6000_create_inferior (int pid)
+{
+ if (rs6000_set_host_arch_hook)
+ rs6000_set_host_arch_hook (pid);
}
-#endif
\f
+/* Support for CONVERT_FROM_FUNC_PTR_ADDR(ADDR).
+
+ Usually a function pointer's representation is simply the address
+ of the function. On the RS/6000 however, a function pointer is
+ represented by a pointer to a TOC entry. This TOC entry contains
+ three words, the first word is the address of the function, the
+ second word is the TOC pointer (r2), and the third word is the
+ static chain value. Throughout GDB it is currently assumed that a
+ function pointer contains the address of the function, which is not
+ easy to fix. In addition, the conversion of a function address to
+ a function pointer would require allocation of a TOC entry in the
+ inferior's memory space, with all its drawbacks. To be able to
+ call C++ virtual methods in the inferior (which are called via
+ function pointers), find_function_addr uses this function to get the
+ function address from a function pointer. */
+
+/* Return real function address if ADDR (a function pointer) is in the data
+ space and is therefore a special function pointer. */
-/* Handling the various PowerPC/RS6000 variants. */
+CORE_ADDR
+rs6000_convert_from_func_ptr_addr (CORE_ADDR addr)
+{
+ struct obj_section *s;
+
+ s = find_pc_section (addr);
+ if (s && s->the_bfd_section->flags & SEC_CODE)
+ return addr;
+
+ /* ADDR is in the data space, so it's a special function pointer. */
+ return read_memory_addr (addr, TDEP->wordsize);
+}
+\f
+/* Handling the various POWER/PowerPC variants. */
-/* The arrays here called register_names_MUMBLE hold names that
- the rs6000_register_name function returns.
+
+/* The arrays here called registers_MUMBLE hold information about available
+ registers.
For each family of PPC variants, I've tried to isolate out the
common registers and put them up front, so that as long as you get
Most of these register groups aren't anything formal. I arrived at
them by looking at the registers that occurred in more than one
- processor. */
-
-/* UISA register names common across all architectures, including POWER. */
-
-#define COMMON_UISA_REG_NAMES \
- /* 0 */ "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \
- /* 8 */ "r8", "r9", "r10","r11","r12","r13","r14","r15", \
- /* 16 */ "r16","r17","r18","r19","r20","r21","r22","r23", \
- /* 24 */ "r24","r25","r26","r27","r28","r29","r30","r31", \
- /* 32 */ "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7", \
- /* 40 */ "f8", "f9", "f10","f11","f12","f13","f14","f15", \
- /* 48 */ "f16","f17","f18","f19","f20","f21","f22","f23", \
- /* 56 */ "f24","f25","f26","f27","f28","f29","f30","f31", \
- /* 64 */ "pc", "ps"
-
-/* UISA-level SPR names for PowerPC. */
-#define PPC_UISA_SPR_NAMES \
- /* 66 */ "cr", "lr", "ctr", "xer", ""
-
-/* Segment register names, for PowerPC. */
-#define PPC_SEGMENT_REG_NAMES \
- /* 71 */ "sr0", "sr1", "sr2", "sr3", "sr4", "sr5", "sr6", "sr7", \
- /* 79 */ "sr8", "sr9", "sr10", "sr11", "sr12", "sr13", "sr14", "sr15"
-
-/* OEA SPR names for 32-bit PowerPC implementations.
- The blank space is for "asr", which is only present on 64-bit
- implementations. */
-#define PPC_32_OEA_SPR_NAMES \
- /* 87 */ "pvr", \
- /* 88 */ "ibat0u", "ibat0l", "ibat1u", "ibat1l", \
- /* 92 */ "ibat2u", "ibat2l", "ibat3u", "ibat3l", \
- /* 96 */ "dbat0u", "dbat0l", "dbat1u", "dbat1l", \
- /* 100 */ "dbat2u", "dbat2l", "dbat3u", "dbat3l", \
- /* 104 */ "sdr1", "", "dar", "dsisr", "sprg0", "sprg1", "sprg2", "sprg3",\
- /* 112 */ "srr0", "srr1", "tbl", "tbu", "dec", "dabr", "ear"
-
-/* For the RS6000, we only cover user-level SPR's. */
-char *register_names_rs6000[] =
-{
- COMMON_UISA_REG_NAMES,
- /* 66 */ "cnd", "lr", "cnt", "xer", "mq"
+ processor. */
+
+/* Convenience macros for populating register arrays. */
+
+/* Within another macro, convert S to a string. */
+
+#define STR(s) #s
+
+/* Return a struct reg defining register NAME that's 32 bits on 32-bit systems
+ and 64 bits on 64-bit systems. */
+#define R(name) { STR(name), 4, 8, 0 }
+
+/* Return a struct reg defining register NAME that's 32 bits on all
+ systems. */
+#define R4(name) { STR(name), 4, 4, 0 }
+
+/* Return a struct reg defining register NAME that's 64 bits on all
+ systems. */
+#define R8(name) { STR(name), 8, 8, 0 }
+
+/* Return a struct reg defining register NAME that's 128 bits on all
+ systems. */
+#define R16(name) { STR(name), 16, 16, 0 }
+
+/* Return a struct reg defining floating-point register NAME. */
+#define F(name) { STR(name), 8, 8, 1 }
+
+/* Return a struct reg defining register NAME that's 32 bits on 32-bit
+ systems and that doesn't exist on 64-bit systems. */
+#define R32(name) { STR(name), 4, 0, 0 }
+
+/* Return a struct reg defining register NAME that's 64 bits on 64-bit
+ systems and that doesn't exist on 32-bit systems. */
+#define R64(name) { STR(name), 0, 8, 0 }
+
+/* Return a struct reg placeholder for a register that doesn't exist. */
+#define R0 { 0, 0, 0, 0 }
+
+/* UISA registers common across all architectures, including POWER. */
+
+#define COMMON_UISA_REGS \
+ /* 0 */ R(r0), R(r1), R(r2), R(r3), R(r4), R(r5), R(r6), R(r7), \
+ /* 8 */ R(r8), R(r9), R(r10),R(r11),R(r12),R(r13),R(r14),R(r15), \
+ /* 16 */ R(r16),R(r17),R(r18),R(r19),R(r20),R(r21),R(r22),R(r23), \
+ /* 24 */ R(r24),R(r25),R(r26),R(r27),R(r28),R(r29),R(r30),R(r31), \
+ /* 32 */ F(f0), F(f1), F(f2), F(f3), F(f4), F(f5), F(f6), F(f7), \
+ /* 40 */ F(f8), F(f9), F(f10),F(f11),F(f12),F(f13),F(f14),F(f15), \
+ /* 48 */ F(f16),F(f17),F(f18),F(f19),F(f20),F(f21),F(f22),F(f23), \
+ /* 56 */ F(f24),F(f25),F(f26),F(f27),F(f28),F(f29),F(f30),F(f31), \
+ /* 64 */ R(pc), R(ps)
+
+#define COMMON_UISA_NOFP_REGS \
+ /* 0 */ R(r0), R(r1), R(r2), R(r3), R(r4), R(r5), R(r6), R(r7), \
+ /* 8 */ R(r8), R(r9), R(r10),R(r11),R(r12),R(r13),R(r14),R(r15), \
+ /* 16 */ R(r16),R(r17),R(r18),R(r19),R(r20),R(r21),R(r22),R(r23), \
+ /* 24 */ R(r24),R(r25),R(r26),R(r27),R(r28),R(r29),R(r30),R(r31), \
+ /* 32 */ R0, R0, R0, R0, R0, R0, R0, R0, \
+ /* 40 */ R0, R0, R0, R0, R0, R0, R0, R0, \
+ /* 48 */ R0, R0, R0, R0, R0, R0, R0, R0, \
+ /* 56 */ R0, R0, R0, R0, R0, R0, R0, R0, \
+ /* 64 */ R(pc), R(ps)
+
+/* UISA-level SPRs for PowerPC. */
+#define PPC_UISA_SPRS \
+ /* 66 */ R4(cr), R(lr), R(ctr), R4(xer), R4(fpscr)
+
+/* Segment registers, for PowerPC. */
+#define PPC_SEGMENT_REGS \
+ /* 71 */ R32(sr0), R32(sr1), R32(sr2), R32(sr3), \
+ /* 75 */ R32(sr4), R32(sr5), R32(sr6), R32(sr7), \
+ /* 79 */ R32(sr8), R32(sr9), R32(sr10), R32(sr11), \
+ /* 83 */ R32(sr12), R32(sr13), R32(sr14), R32(sr15)
+
+/* OEA SPRs for PowerPC. */
+#define PPC_OEA_SPRS \
+ /* 87 */ R4(pvr), \
+ /* 88 */ R(ibat0u), R(ibat0l), R(ibat1u), R(ibat1l), \
+ /* 92 */ R(ibat2u), R(ibat2l), R(ibat3u), R(ibat3l), \
+ /* 96 */ R(dbat0u), R(dbat0l), R(dbat1u), R(dbat1l), \
+ /* 100 */ R(dbat2u), R(dbat2l), R(dbat3u), R(dbat3l), \
+ /* 104 */ R(sdr1), R64(asr), R(dar), R4(dsisr), \
+ /* 108 */ R(sprg0), R(sprg1), R(sprg2), R(sprg3), \
+ /* 112 */ R(srr0), R(srr1), R(tbl), R(tbu), \
+ /* 116 */ R4(dec), R(dabr), R4(ear)
+
+/* AltiVec registers */
+#define PPC_ALTIVEC_REGS \
+ /*119*/R16(vr0), R16(vr1), R16(vr2), R16(vr3), R16(vr4), R16(vr5), R16(vr6), R16(vr7), \
+ /*127*/R16(vr8), R16(vr9), R16(vr10),R16(vr11),R16(vr12),R16(vr13),R16(vr14),R16(vr15), \
+ /*135*/R16(vr16),R16(vr17),R16(vr18),R16(vr19),R16(vr20),R16(vr21),R16(vr22),R16(vr23), \
+ /*143*/R16(vr24),R16(vr25),R16(vr26),R16(vr27),R16(vr28),R16(vr29),R16(vr30),R16(vr31), \
+ /*151*/R4(vscr), R4(vrsave)
+
+/* IBM POWER (pre-PowerPC) architecture, user-level view. We only cover
+ user-level SPR's. */
+static const struct reg registers_power[] =
+{
+ COMMON_UISA_REGS,
+ /* 66 */ R4(cnd), R(lr), R(cnt), R4(xer), R4(mq),
+ /* 71 */ R4(fpscr)
+};
+
+/* PowerPC UISA - a PPC processor as viewed by user-level code. A UISA-only
+ view of the PowerPC. */
+static const struct reg registers_powerpc[] =
+{
+ COMMON_UISA_REGS,
+ PPC_UISA_SPRS,
+ PPC_ALTIVEC_REGS
};
-/* a UISA-only view of the PowerPC. */
-char *register_names_uisa[] =
+/* PowerPC UISA - a PPC processor as viewed by user-level
+ code, but without floating point registers. */
+static const struct reg registers_powerpc_nofp[] =
{
- COMMON_UISA_REG_NAMES,
- PPC_UISA_SPR_NAMES
+ COMMON_UISA_NOFP_REGS,
+ PPC_UISA_SPRS
};
-char *register_names_403[] =
+/* IBM PowerPC 403. */
+static const struct reg registers_403[] =
{
- COMMON_UISA_REG_NAMES,
- PPC_UISA_SPR_NAMES,
- PPC_SEGMENT_REG_NAMES,
- PPC_32_OEA_SPR_NAMES,
- /* 119 */ "icdbdr", "esr", "dear", "evpr", "cdbcr", "tsr", "tcr", "pit",
- /* 127 */ "tbhi", "tblo", "srr2", "srr3", "dbsr", "dbcr", "iac1", "iac2",
- /* 135 */ "dac1", "dac2", "dccr", "iccr", "pbl1", "pbu1", "pbl2", "pbu2"
+ COMMON_UISA_REGS,
+ PPC_UISA_SPRS,
+ PPC_SEGMENT_REGS,
+ PPC_OEA_SPRS,
+ /* 119 */ R(icdbdr), R(esr), R(dear), R(evpr),
+ /* 123 */ R(cdbcr), R(tsr), R(tcr), R(pit),
+ /* 127 */ R(tbhi), R(tblo), R(srr2), R(srr3),
+ /* 131 */ R(dbsr), R(dbcr), R(iac1), R(iac2),
+ /* 135 */ R(dac1), R(dac2), R(dccr), R(iccr),
+ /* 139 */ R(pbl1), R(pbu1), R(pbl2), R(pbu2)
};
-char *register_names_403GC[] =
+/* IBM PowerPC 403GC. */
+static const struct reg registers_403GC[] =
{
- COMMON_UISA_REG_NAMES,
- PPC_UISA_SPR_NAMES,
- PPC_SEGMENT_REG_NAMES,
- PPC_32_OEA_SPR_NAMES,
- /* 119 */ "icdbdr", "esr", "dear", "evpr", "cdbcr", "tsr", "tcr", "pit",
- /* 127 */ "tbhi", "tblo", "srr2", "srr3", "dbsr", "dbcr", "iac1", "iac2",
- /* 135 */ "dac1", "dac2", "dccr", "iccr", "pbl1", "pbu1", "pbl2", "pbu2",
- /* 143 */ "zpr", "pid", "sgr", "dcwr", "tbhu", "tblu"
+ COMMON_UISA_REGS,
+ PPC_UISA_SPRS,
+ PPC_SEGMENT_REGS,
+ PPC_OEA_SPRS,
+ /* 119 */ R(icdbdr), R(esr), R(dear), R(evpr),
+ /* 123 */ R(cdbcr), R(tsr), R(tcr), R(pit),
+ /* 127 */ R(tbhi), R(tblo), R(srr2), R(srr3),
+ /* 131 */ R(dbsr), R(dbcr), R(iac1), R(iac2),
+ /* 135 */ R(dac1), R(dac2), R(dccr), R(iccr),
+ /* 139 */ R(pbl1), R(pbu1), R(pbl2), R(pbu2),
+ /* 143 */ R(zpr), R(pid), R(sgr), R(dcwr),
+ /* 147 */ R(tbhu), R(tblu)
};
-char *register_names_505[] =
+/* Motorola PowerPC 505. */
+static const struct reg registers_505[] =
{
- COMMON_UISA_REG_NAMES,
- PPC_UISA_SPR_NAMES,
- PPC_SEGMENT_REG_NAMES,
- PPC_32_OEA_SPR_NAMES,
- /* 119 */ "eie", "eid", "nri"
+ COMMON_UISA_REGS,
+ PPC_UISA_SPRS,
+ PPC_SEGMENT_REGS,
+ PPC_OEA_SPRS,
+ /* 119 */ R(eie), R(eid), R(nri)
};
-char *register_names_860[] =
-{
- COMMON_UISA_REG_NAMES,
- PPC_UISA_SPR_NAMES,
- PPC_SEGMENT_REG_NAMES,
- PPC_32_OEA_SPR_NAMES,
- /* 119 */ "eie", "eid", "nri", "cmpa", "cmpb", "cmpc", "cmpd", "icr",
- /* 127 */ "der", "counta", "countb", "cmpe", "cmpf", "cmpg", "cmph",
- /* 134 */ "lctrl1", "lctrl2", "ictrl", "bar", "ic_cst", "ic_adr", "ic_dat",
- /* 141 */ "dc_cst", "dc_adr", "dc_dat", "dpdr", "dpir", "immr", "mi_ctr",
- /* 148 */ "mi_ap", "mi_epn", "mi_twc", "mi_rpn", "md_ctr", "m_casid",
- /* 154 */ "md_ap", "md_epn", "md_twb", "md_twc", "md_rpn", "m_tw",
- /* 160 */ "mi_dbcam", "mi_dbram0", "mi_dbram1", "md_dbcam", "md_dbram0",
- /* 165 */ "md_dbram1"
+/* Motorola PowerPC 860 or 850. */
+static const struct reg registers_860[] =
+{
+ COMMON_UISA_REGS,
+ PPC_UISA_SPRS,
+ PPC_SEGMENT_REGS,
+ PPC_OEA_SPRS,
+ /* 119 */ R(eie), R(eid), R(nri), R(cmpa),
+ /* 123 */ R(cmpb), R(cmpc), R(cmpd), R(icr),
+ /* 127 */ R(der), R(counta), R(countb), R(cmpe),
+ /* 131 */ R(cmpf), R(cmpg), R(cmph), R(lctrl1),
+ /* 135 */ R(lctrl2), R(ictrl), R(bar), R(ic_cst),
+ /* 139 */ R(ic_adr), R(ic_dat), R(dc_cst), R(dc_adr),
+ /* 143 */ R(dc_dat), R(dpdr), R(dpir), R(immr),
+ /* 147 */ R(mi_ctr), R(mi_ap), R(mi_epn), R(mi_twc),
+ /* 151 */ R(mi_rpn), R(md_ctr), R(m_casid), R(md_ap),
+ /* 155 */ R(md_epn), R(md_twb), R(md_twc), R(md_rpn),
+ /* 159 */ R(m_tw), R(mi_dbcam), R(mi_dbram0), R(mi_dbram1),
+ /* 163 */ R(md_dbcam), R(md_dbram0), R(md_dbram1)
};
-/* Note that the 601 has different register numbers for reading and
- writing RTCU and RTCL. However, how one reads and writes a
+/* Motorola PowerPC 601. Note that the 601 has different register numbers
+ for reading and writing RTCU and RTCL. However, how one reads and writes a
register is the stub's problem. */
-char *register_names_601[] =
-{
- COMMON_UISA_REG_NAMES,
- PPC_UISA_SPR_NAMES,
- PPC_SEGMENT_REG_NAMES,
- PPC_32_OEA_SPR_NAMES,
- /* 119 */ "hid0", "hid1", "iabr", "dabr", "pir", "mq", "rtcu",
- /* 126 */ "rtcl"
+static const struct reg registers_601[] =
+{
+ COMMON_UISA_REGS,
+ PPC_UISA_SPRS,
+ PPC_SEGMENT_REGS,
+ PPC_OEA_SPRS,
+ /* 119 */ R(hid0), R(hid1), R(iabr), R(dabr),
+ /* 123 */ R(pir), R(mq), R(rtcu), R(rtcl)
};
-char *register_names_602[] =
+/* Motorola PowerPC 602. */
+static const struct reg registers_602[] =
{
- COMMON_UISA_REG_NAMES,
- PPC_UISA_SPR_NAMES,
- PPC_SEGMENT_REG_NAMES,
- PPC_32_OEA_SPR_NAMES,
- /* 119 */ "hid0", "hid1", "iabr", "", "", "tcr", "ibr", "esassr", "sebr",
- /* 128 */ "ser", "sp", "lt"
+ COMMON_UISA_REGS,
+ PPC_UISA_SPRS,
+ PPC_SEGMENT_REGS,
+ PPC_OEA_SPRS,
+ /* 119 */ R(hid0), R(hid1), R(iabr), R0,
+ /* 123 */ R0, R(tcr), R(ibr), R(esassr),
+ /* 127 */ R(sebr), R(ser), R(sp), R(lt)
};
-char *register_names_603[] =
+/* Motorola/IBM PowerPC 603 or 603e. */
+static const struct reg registers_603[] =
{
- COMMON_UISA_REG_NAMES,
- PPC_UISA_SPR_NAMES,
- PPC_SEGMENT_REG_NAMES,
- PPC_32_OEA_SPR_NAMES,
- /* 119 */ "hid0", "hid1", "iabr", "", "", "dmiss", "dcmp", "hash1",
- /* 127 */ "hash2", "imiss", "icmp", "rpa"
+ COMMON_UISA_REGS,
+ PPC_UISA_SPRS,
+ PPC_SEGMENT_REGS,
+ PPC_OEA_SPRS,
+ /* 119 */ R(hid0), R(hid1), R(iabr), R0,
+ /* 123 */ R0, R(dmiss), R(dcmp), R(hash1),
+ /* 127 */ R(hash2), R(imiss), R(icmp), R(rpa)
};
-char *register_names_604[] =
+/* Motorola PowerPC 604 or 604e. */
+static const struct reg registers_604[] =
{
- COMMON_UISA_REG_NAMES,
- PPC_UISA_SPR_NAMES,
- PPC_SEGMENT_REG_NAMES,
- PPC_32_OEA_SPR_NAMES,
- /* 119 */ "hid0", "hid1", "iabr", "dabr", "pir", "mmcr0", "pmc1", "pmc2",
- /* 127 */ "sia", "sda"
+ COMMON_UISA_REGS,
+ PPC_UISA_SPRS,
+ PPC_SEGMENT_REGS,
+ PPC_OEA_SPRS,
+ /* 119 */ R(hid0), R(hid1), R(iabr), R(dabr),
+ /* 123 */ R(pir), R(mmcr0), R(pmc1), R(pmc2),
+ /* 127 */ R(sia), R(sda)
};
-char *register_names_750[] =
+/* Motorola/IBM PowerPC 750 or 740. */
+static const struct reg registers_750[] =
{
- COMMON_UISA_REG_NAMES,
- PPC_UISA_SPR_NAMES,
- PPC_SEGMENT_REG_NAMES,
- PPC_32_OEA_SPR_NAMES,
- /* 119 */ "hid0", "hid1", "iabr", "dabr", "", "ummcr0", "upmc1", "upmc2",
- /* 127 */ "usia", "ummcr1", "upmc3", "upmc4", "mmcr0", "pmc1", "pmc2",
- /* 134 */ "sia", "mmcr1", "pmc3", "pmc4", "l2cr", "ictc", "thrm1", "thrm2",
- /* 142 */ "thrm3"
+ COMMON_UISA_REGS,
+ PPC_UISA_SPRS,
+ PPC_SEGMENT_REGS,
+ PPC_OEA_SPRS,
+ /* 119 */ R(hid0), R(hid1), R(iabr), R(dabr),
+ /* 123 */ R0, R(ummcr0), R(upmc1), R(upmc2),
+ /* 127 */ R(usia), R(ummcr1), R(upmc3), R(upmc4),
+ /* 131 */ R(mmcr0), R(pmc1), R(pmc2), R(sia),
+ /* 135 */ R(mmcr1), R(pmc3), R(pmc4), R(l2cr),
+ /* 139 */ R(ictc), R(thrm1), R(thrm2), R(thrm3)
};
+/* Motorola PowerPC 7400. */
+static const struct reg registers_7400[] =
+{
+ /* gpr0-gpr31, fpr0-fpr31 */
+ COMMON_UISA_REGS,
+ /* ctr, xre, lr, cr */
+ PPC_UISA_SPRS,
+ /* sr0-sr15 */
+ PPC_SEGMENT_REGS,
+ PPC_OEA_SPRS,
+ /* vr0-vr31, vrsave, vscr */
+ PPC_ALTIVEC_REGS
+ /* FIXME? Add more registers? */
+};
+
/* Information about a particular processor variant. */
+
struct variant
{
/* Name of this variant. */
/* English description of the variant. */
char *description;
+ /* bfd_arch_info.arch corresponding to variant. */
+ enum bfd_architecture arch;
+
+ /* bfd_arch_info.mach corresponding to variant. */
+ unsigned long mach;
+
/* Table of register names; registers[R] is the name of the register
number R. */
- int num_registers;
- char **registers;
+ int nregs;
+ const struct reg *regs;
};
#define num_registers(list) (sizeof (list) / sizeof((list)[0]))
If you add entries to this table, please be sure to allow the new
value as an argument to the --with-cpu flag, in configure.in. */
-static struct variant
- variants[] =
-{
- {"ppc-uisa", "PowerPC UISA - a PPC processor as viewed by user-level code",
- num_registers (register_names_uisa), register_names_uisa},
- {"rs6000", "IBM RS6000 (\"POWER\") architecture, user-level view",
- num_registers (register_names_rs6000), register_names_rs6000},
- {"403", "IBM PowerPC 403",
- num_registers (register_names_403), register_names_403},
- {"403GC", "IBM PowerPC 403GC",
- num_registers (register_names_403GC), register_names_403GC},
- {"505", "Motorola PowerPC 505",
- num_registers (register_names_505), register_names_505},
- {"860", "Motorola PowerPC 860 or 850",
- num_registers (register_names_860), register_names_860},
- {"601", "Motorola PowerPC 601",
- num_registers (register_names_601), register_names_601},
- {"602", "Motorola PowerPC 602",
- num_registers (register_names_602), register_names_602},
- {"603", "Motorola/IBM PowerPC 603 or 603e",
- num_registers (register_names_603), register_names_603},
- {"604", "Motorola PowerPC 604 or 604e",
- num_registers (register_names_604), register_names_604},
- {"750", "Motorola/IBM PowerPC 750 or 740",
- num_registers (register_names_750), register_names_750},
+static const struct variant variants[] =
+{
+ {"powerpc", "PowerPC user-level", bfd_arch_powerpc,
+ bfd_mach_ppc, num_registers (registers_powerpc), registers_powerpc},
+ {"power", "POWER user-level", bfd_arch_rs6000,
+ bfd_mach_rs6k, num_registers (registers_power), registers_power},
+ {"403", "IBM PowerPC 403", bfd_arch_powerpc,
+ bfd_mach_ppc_403, num_registers (registers_403), registers_403},
+ {"601", "Motorola PowerPC 601", bfd_arch_powerpc,
+ bfd_mach_ppc_601, num_registers (registers_601), registers_601},
+ {"602", "Motorola PowerPC 602", bfd_arch_powerpc,
+ bfd_mach_ppc_602, num_registers (registers_602), registers_602},
+ {"603", "Motorola/IBM PowerPC 603 or 603e", bfd_arch_powerpc,
+ bfd_mach_ppc_603, num_registers (registers_603), registers_603},
+ {"604", "Motorola PowerPC 604 or 604e", bfd_arch_powerpc,
+ 604, num_registers (registers_604), registers_604},
+ {"403GC", "IBM PowerPC 403GC", bfd_arch_powerpc,
+ bfd_mach_ppc_403gc, num_registers (registers_403GC), registers_403GC},
+ {"505", "Motorola PowerPC 505", bfd_arch_powerpc,
+ bfd_mach_ppc_505, num_registers (registers_505), registers_505},
+ {"860", "Motorola PowerPC 860 or 850", bfd_arch_powerpc,
+ bfd_mach_ppc_860, num_registers (registers_860), registers_860},
+ {"750", "Motorola/IBM PowerPC 750 or 740", bfd_arch_powerpc,
+ bfd_mach_ppc_750, num_registers (registers_750), registers_750},
+ {"7400", "Motorola/IBM PowerPC 7400 (G4)", bfd_arch_powerpc,
+ bfd_mach_ppc_7400, num_registers (registers_7400), registers_7400},
+
+ /* 64-bit */
+ {"powerpc64", "PowerPC 64-bit user-level", bfd_arch_powerpc,
+ bfd_mach_ppc64, num_registers (registers_powerpc), registers_powerpc},
+ {"620", "Motorola PowerPC 620", bfd_arch_powerpc,
+ bfd_mach_ppc_620, num_registers (registers_powerpc), registers_powerpc},
+ {"630", "Motorola PowerPC 630", bfd_arch_powerpc,
+ bfd_mach_ppc_630, num_registers (registers_powerpc), registers_powerpc},
+ {"a35", "PowerPC A35", bfd_arch_powerpc,
+ bfd_mach_ppc_a35, num_registers (registers_powerpc), registers_powerpc},
+ {"rs64ii", "PowerPC rs64ii", bfd_arch_powerpc,
+ bfd_mach_ppc_rs64ii, num_registers (registers_powerpc), registers_powerpc},
+ {"rs64iii", "PowerPC rs64iii", bfd_arch_powerpc,
+ bfd_mach_ppc_rs64iii, num_registers (registers_powerpc), registers_powerpc},
+
+ /* FIXME: I haven't checked the register sets of the following. */
+ {"rs1", "IBM POWER RS1", bfd_arch_rs6000,
+ bfd_mach_rs6k_rs1, num_registers (registers_power), registers_power},
+ {"rsc", "IBM POWER RSC", bfd_arch_rs6000,
+ bfd_mach_rs6k_rsc, num_registers (registers_power), registers_power},
+ {"rs2", "IBM POWER RS2", bfd_arch_rs6000,
+ bfd_mach_rs6k_rs2, num_registers (registers_power), registers_power},
+
{0, 0, 0, 0}
};
+#undef num_registers
-static struct variant *current_variant;
+/* Return the variant corresponding to architecture ARCH and machine number
+ MACH. If no such variant exists, return null. */
-char *
-rs6000_register_name (int i)
+static const struct variant *
+find_variant_by_arch (enum bfd_architecture arch, unsigned long mach)
{
- if (i < 0 || i >= NUM_REGS)
- error ("GDB bug: rs6000-tdep.c (rs6000_register_name): strange register number");
+ const struct variant *v;
- return ((i < current_variant->num_registers)
- ? current_variant->registers[i]
- : "");
+ for (v = variants; v->name; v++)
+ if (arch == v->arch && mach == v->mach)
+ return v;
+
+ return NULL;
}
+
+\f
static void
-install_variant (struct variant *v)
+process_note_abi_tag_sections (bfd *abfd, asection *sect, void *obj)
{
- current_variant = v;
-}
+ int *os_ident_ptr = obj;
+ const char *name;
+ unsigned int sectsize;
+ name = bfd_get_section_name (abfd, sect);
+ sectsize = bfd_section_size (abfd, sect);
+ if (strcmp (name, ".note.ABI-tag") == 0 && sectsize > 0)
+ {
+ unsigned int name_length, data_length, note_type;
+ char *note = alloca (sectsize);
-/* Look up the variant named NAME in the `variants' table. Return a
- pointer to the struct variant, or null if we couldn't find it. */
-static struct variant *
-find_variant_by_name (char *name)
-{
- int i;
+ bfd_get_section_contents (abfd, sect, note,
+ (file_ptr) 0, (bfd_size_type) sectsize);
- for (i = 0; variants[i].name; i++)
- if (!strcmp (name, variants[i].name))
- return &variants[i];
+ name_length = bfd_h_get_32 (abfd, note);
+ data_length = bfd_h_get_32 (abfd, note + 4);
+ note_type = bfd_h_get_32 (abfd, note + 8);
- return 0;
-}
+ if (name_length == 4 && data_length == 16 && note_type == 1
+ && strcmp (note + 12, "GNU") == 0)
+ {
+ int os_number = bfd_h_get_32 (abfd, note + 16);
+ /* The case numbers are from abi-tags in glibc */
+ switch (os_number)
+ {
+ case 0 :
+ *os_ident_ptr = ELFOSABI_LINUX;
+ break;
+ case 1 :
+ *os_ident_ptr = ELFOSABI_HURD;
+ break;
+ case 2 :
+ *os_ident_ptr = ELFOSABI_SOLARIS;
+ break;
+ default :
+ internal_error (__FILE__, __LINE__,
+ "process_note_abi_sections: unknown OS number %d",
+ os_number);
+ break;
+ }
+ }
+ }
+}
-/* Install the PPC/RS6000 variant named NAME in the `variants' table.
- Return zero if we installed it successfully, or a non-zero value if
- we couldn't do it.
+/* Return one of the ELFOSABI_ constants for BFDs representing ELF
+ executables. If it's not an ELF executable or if the OS/ABI couldn't
+ be determined, simply return -1. */
- This might be useful to code outside this file, which doesn't want
- to depend on the exact indices of the entries in the `variants'
- table. Just make it non-static if you want that. */
static int
-install_variant_by_name (char *name)
+get_elfosabi (bfd *abfd)
{
- struct variant *v = find_variant_by_name (name);
+ int elfosabi = -1;
- if (v)
+ if (abfd != NULL && bfd_get_flavour (abfd) == bfd_target_elf_flavour)
{
- install_variant (v);
- return 0;
+ elfosabi = elf_elfheader (abfd)->e_ident[EI_OSABI];
+
+ /* When elfosabi is 0 (ELFOSABI_NONE), this is supposed to indicate
+ that we're on a SYSV system. However, GNU/Linux uses a note section
+ to record OS/ABI info, but leaves e_ident[EI_OSABI] zero. So we
+ have to check the note sections too. */
+ if (elfosabi == 0)
+ {
+ bfd_map_over_sections (abfd,
+ process_note_abi_tag_sections,
+ &elfosabi);
+ }
}
- else
- return 1;
+
+ return elfosabi;
}
+\f
-static void
-list_variants ()
+/* Initialize the current architecture based on INFO. If possible, re-use an
+ architecture from ARCHES, which is a list of architectures already created
+ during this debugging session.
+
+ Called e.g. at program startup, when reading a core file, and when reading
+ a binary file. */
+
+static struct gdbarch *
+rs6000_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches)
{
- int i;
+ struct gdbarch *gdbarch;
+ struct gdbarch_tdep *tdep;
+ int wordsize, from_xcoff_exec, from_elf_exec, power, i, off;
+ struct reg *regs;
+ const struct variant *v;
+ enum bfd_architecture arch;
+ unsigned long mach;
+ bfd abfd;
+ int osabi, sysv_abi;
+ gdbarch_print_insn_ftype *print_insn;
+
+ from_xcoff_exec = info.abfd && info.abfd->format == bfd_object &&
+ bfd_get_flavour (info.abfd) == bfd_target_xcoff_flavour;
+
+ from_elf_exec = info.abfd && info.abfd->format == bfd_object &&
+ bfd_get_flavour (info.abfd) == bfd_target_elf_flavour;
+
+ sysv_abi = info.abfd && bfd_get_flavour (info.abfd) == bfd_target_elf_flavour;
+
+ osabi = get_elfosabi (info.abfd);
+
+ /* Check word size. If INFO is from a binary file, infer it from
+ that, else choose a likely default. */
+ if (from_xcoff_exec)
+ {
+ if (xcoff_data (info.abfd)->xcoff64)
+ wordsize = 8;
+ else
+ wordsize = 4;
+ }
+ else if (from_elf_exec)
+ {
+ if (elf_elfheader (info.abfd)->e_ident[EI_CLASS] == ELFCLASS64)
+ wordsize = 8;
+ else
+ wordsize = 4;
+ }
+ else
+ {
+ if (info.bfd_arch_info != NULL && info.bfd_arch_info->bits_per_word != 0)
+ wordsize = info.bfd_arch_info->bits_per_word /
+ info.bfd_arch_info->bits_per_byte;
+ else
+ wordsize = 4;
+ }
- printf_filtered ("GDB knows about the following PowerPC and RS6000 variants:\n");
+ /* Find a candidate among extant architectures. */
+ for (arches = gdbarch_list_lookup_by_info (arches, &info);
+ arches != NULL;
+ arches = gdbarch_list_lookup_by_info (arches->next, &info))
+ {
+ /* Word size in the various PowerPC bfd_arch_info structs isn't
+ meaningful, because 64-bit CPUs can run in 32-bit mode. So, perform
+ separate word size check. */
+ tdep = gdbarch_tdep (arches->gdbarch);
+ if (tdep && tdep->wordsize == wordsize && tdep->osabi == osabi)
+ return arches->gdbarch;
+ }
- for (i = 0; variants[i].name; i++)
- printf_filtered (" %-8s %s\n",
- variants[i].name, variants[i].description);
-}
+ /* None found, create a new architecture from INFO, whose bfd_arch_info
+ validity depends on the source:
+ - executable useless
+ - rs6000_host_arch() good
+ - core file good
+ - "set arch" trust blindly
+ - GDB startup useless but harmless */
+ if (!from_xcoff_exec)
+ {
+ arch = info.bfd_arch_info->arch;
+ mach = info.bfd_arch_info->mach;
+ }
+ else
+ {
+ arch = bfd_arch_powerpc;
+ mach = 0;
+ bfd_default_set_arch_mach (&abfd, arch, mach);
+ info.bfd_arch_info = bfd_get_arch_info (&abfd);
+ }
+ tdep = xmalloc (sizeof (struct gdbarch_tdep));
+ tdep->wordsize = wordsize;
+ tdep->osabi = osabi;
+ gdbarch = gdbarch_alloc (&info, tdep);
+ power = arch == bfd_arch_rs6000;
+
+ /* Choose variant. */
+ v = find_variant_by_arch (arch, mach);
+ if (!v)
+ return NULL;
+
+ tdep->regs = v->regs;
+
+ tdep->ppc_gp0_regnum = 0;
+ tdep->ppc_gplast_regnum = 31;
+ tdep->ppc_toc_regnum = 2;
+ tdep->ppc_ps_regnum = 65;
+ tdep->ppc_cr_regnum = 66;
+ tdep->ppc_lr_regnum = 67;
+ tdep->ppc_ctr_regnum = 68;
+ tdep->ppc_xer_regnum = 69;
+ if (v->mach == bfd_mach_ppc_601)
+ tdep->ppc_mq_regnum = 124;
+ else if (power)
+ tdep->ppc_mq_regnum = 70;
+ else
+ tdep->ppc_mq_regnum = -1;
+ tdep->ppc_fpscr_regnum = power ? 71 : 70;
-static void
-show_current_variant ()
-{
- printf_filtered ("PowerPC / RS6000 processor variant is set to `%s'.\n",
- current_variant->name);
-}
+ if (v->arch == bfd_arch_powerpc)
+ switch (v->mach)
+ {
+ case bfd_mach_ppc:
+ tdep->ppc_vr0_regnum = 71;
+ tdep->ppc_vrsave_regnum = 104;
+ break;
+ case bfd_mach_ppc_7400:
+ tdep->ppc_vr0_regnum = 119;
+ tdep->ppc_vrsave_regnum = 153;
+ break;
+ default:
+ tdep->ppc_vr0_regnum = -1;
+ tdep->ppc_vrsave_regnum = -1;
+ break;
+ }
+
+ /* Set lr_frame_offset. */
+ if (wordsize == 8)
+ tdep->lr_frame_offset = 16;
+ else if (sysv_abi)
+ tdep->lr_frame_offset = 4;
+ else
+ tdep->lr_frame_offset = 8;
+ /* Calculate byte offsets in raw register array. */
+ tdep->regoff = xmalloc (v->nregs * sizeof (int));
+ for (i = off = 0; i < v->nregs; i++)
+ {
+ tdep->regoff[i] = off;
+ off += regsize (v->regs + i, wordsize);
+ }
-static void
-set_processor (char *arg, int from_tty)
-{
- if (!arg || arg[0] == '\0')
+ /* Select instruction printer. */
+ if (arch == power)
+ print_insn = print_insn_rs6000;
+ else if (info.byte_order == BFD_ENDIAN_BIG)
+ print_insn = print_insn_big_powerpc;
+ else
+ print_insn = print_insn_little_powerpc;
+ set_gdbarch_print_insn (gdbarch, print_insn);
+
+ set_gdbarch_read_pc (gdbarch, generic_target_read_pc);
+ set_gdbarch_write_pc (gdbarch, generic_target_write_pc);
+ set_gdbarch_read_fp (gdbarch, generic_target_read_fp);
+ set_gdbarch_read_sp (gdbarch, generic_target_read_sp);
+ set_gdbarch_write_sp (gdbarch, generic_target_write_sp);
+
+ set_gdbarch_num_regs (gdbarch, v->nregs);
+ set_gdbarch_sp_regnum (gdbarch, 1);
+ set_gdbarch_fp_regnum (gdbarch, 1);
+ set_gdbarch_pc_regnum (gdbarch, 64);
+ set_gdbarch_register_name (gdbarch, rs6000_register_name);
+ set_gdbarch_register_size (gdbarch, wordsize);
+ set_gdbarch_register_bytes (gdbarch, off);
+ set_gdbarch_register_byte (gdbarch, rs6000_register_byte);
+ set_gdbarch_register_raw_size (gdbarch, rs6000_register_raw_size);
+ set_gdbarch_max_register_raw_size (gdbarch, 16);
+ set_gdbarch_register_virtual_size (gdbarch, generic_register_virtual_size);
+ set_gdbarch_max_register_virtual_size (gdbarch, 16);
+ set_gdbarch_register_virtual_type (gdbarch, rs6000_register_virtual_type);
+ set_gdbarch_do_registers_info (gdbarch, rs6000_do_registers_info);
+
+ set_gdbarch_ptr_bit (gdbarch, wordsize * TARGET_CHAR_BIT);
+ set_gdbarch_short_bit (gdbarch, 2 * TARGET_CHAR_BIT);
+ set_gdbarch_int_bit (gdbarch, 4 * TARGET_CHAR_BIT);
+ set_gdbarch_long_bit (gdbarch, wordsize * TARGET_CHAR_BIT);
+ set_gdbarch_long_long_bit (gdbarch, 8 * TARGET_CHAR_BIT);
+ set_gdbarch_float_bit (gdbarch, 4 * TARGET_CHAR_BIT);
+ set_gdbarch_double_bit (gdbarch, 8 * TARGET_CHAR_BIT);
+ set_gdbarch_long_double_bit (gdbarch, 8 * TARGET_CHAR_BIT);
+ set_gdbarch_char_signed (gdbarch, 0);
+
+ set_gdbarch_use_generic_dummy_frames (gdbarch, 1);
+ set_gdbarch_call_dummy_length (gdbarch, 0);
+ set_gdbarch_call_dummy_location (gdbarch, AT_ENTRY_POINT);
+ set_gdbarch_call_dummy_address (gdbarch, entry_point_address);
+ set_gdbarch_call_dummy_breakpoint_offset_p (gdbarch, 1);
+ set_gdbarch_call_dummy_breakpoint_offset (gdbarch, 0);
+ set_gdbarch_call_dummy_start_offset (gdbarch, 0);
+ set_gdbarch_pc_in_call_dummy (gdbarch, generic_pc_in_call_dummy);
+ set_gdbarch_call_dummy_p (gdbarch, 1);
+ set_gdbarch_call_dummy_stack_adjust_p (gdbarch, 0);
+ set_gdbarch_get_saved_register (gdbarch, generic_get_saved_register);
+ set_gdbarch_fix_call_dummy (gdbarch, rs6000_fix_call_dummy);
+ set_gdbarch_push_dummy_frame (gdbarch, generic_push_dummy_frame);
+ set_gdbarch_save_dummy_frame_tos (gdbarch, generic_save_dummy_frame_tos);
+ set_gdbarch_push_return_address (gdbarch, ppc_push_return_address);
+ set_gdbarch_believe_pcc_promotion (gdbarch, 1);
+ set_gdbarch_coerce_float_to_double (gdbarch, rs6000_coerce_float_to_double);
+
+ set_gdbarch_register_convertible (gdbarch, rs6000_register_convertible);
+ set_gdbarch_register_convert_to_virtual (gdbarch, rs6000_register_convert_to_virtual);
+ set_gdbarch_register_convert_to_raw (gdbarch, rs6000_register_convert_to_raw);
+ set_gdbarch_stab_reg_to_regnum (gdbarch, rs6000_stab_reg_to_regnum);
+
+ set_gdbarch_extract_return_value (gdbarch, rs6000_extract_return_value);
+
+ /* Note: kevinb/2002-04-12: I'm not convinced that rs6000_push_arguments()
+ is correct for the SysV ABI when the wordsize is 8, but I'm also
+ fairly certain that ppc_sysv_abi_push_arguments() will give even
+ worse results since it only works for 32-bit code. So, for the moment,
+ we're better off calling rs6000_push_arguments() since it works for
+ 64-bit code. At some point in the future, this matter needs to be
+ revisited. */
+ if (sysv_abi && wordsize == 4)
+ set_gdbarch_push_arguments (gdbarch, ppc_sysv_abi_push_arguments);
+ else
+ set_gdbarch_push_arguments (gdbarch, rs6000_push_arguments);
+
+ set_gdbarch_store_struct_return (gdbarch, rs6000_store_struct_return);
+ set_gdbarch_store_return_value (gdbarch, rs6000_store_return_value);
+ set_gdbarch_extract_struct_value_address (gdbarch, rs6000_extract_struct_value_address);
+ set_gdbarch_pop_frame (gdbarch, rs6000_pop_frame);
+
+ set_gdbarch_skip_prologue (gdbarch, rs6000_skip_prologue);
+ set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
+ set_gdbarch_decr_pc_after_break (gdbarch, 0);
+ set_gdbarch_function_start_offset (gdbarch, 0);
+ set_gdbarch_breakpoint_from_pc (gdbarch, rs6000_breakpoint_from_pc);
+
+ /* Not sure on this. FIXMEmgo */
+ set_gdbarch_frame_args_skip (gdbarch, 8);
+
+ /* Until November 2001, gcc was not complying to the SYSV ABI for
+ returning structures less than or equal to 8 bytes in size. It was
+ returning everything in memory. When this was corrected, it wasn't
+ fixed for native platforms. */
+ if (sysv_abi)
{
- list_variants ();
- return;
+ if (osabi == ELFOSABI_LINUX
+ || osabi == ELFOSABI_NETBSD
+ || osabi == ELFOSABI_FREEBSD)
+ set_gdbarch_use_struct_convention (gdbarch,
+ ppc_sysv_abi_broken_use_struct_convention);
+ else
+ set_gdbarch_use_struct_convention (gdbarch,
+ ppc_sysv_abi_use_struct_convention);
+ }
+ else
+ {
+ set_gdbarch_use_struct_convention (gdbarch,
+ generic_use_struct_convention);
+ }
+
+ set_gdbarch_frame_chain_valid (gdbarch, file_frame_chain_valid);
+ /* Note: kevinb/2002-04-12: See note above regarding *_push_arguments().
+ The same remarks hold for the methods below. */
+ if (osabi == ELFOSABI_LINUX && wordsize == 4)
+ {
+ set_gdbarch_frameless_function_invocation (gdbarch,
+ ppc_linux_frameless_function_invocation);
+ set_gdbarch_frame_chain (gdbarch, ppc_linux_frame_chain);
+ set_gdbarch_frame_saved_pc (gdbarch, ppc_linux_frame_saved_pc);
+
+ set_gdbarch_frame_init_saved_regs (gdbarch,
+ ppc_linux_frame_init_saved_regs);
+ set_gdbarch_init_extra_frame_info (gdbarch,
+ ppc_linux_init_extra_frame_info);
+
+ set_gdbarch_memory_remove_breakpoint (gdbarch,
+ ppc_linux_memory_remove_breakpoint);
+ set_solib_svr4_fetch_link_map_offsets
+ (gdbarch, ppc_linux_svr4_fetch_link_map_offsets);
}
+ else
+ {
+ set_gdbarch_frameless_function_invocation (gdbarch,
+ rs6000_frameless_function_invocation);
+ set_gdbarch_frame_chain (gdbarch, rs6000_frame_chain);
+ set_gdbarch_frame_saved_pc (gdbarch, rs6000_frame_saved_pc);
- if (install_variant_by_name (arg))
+ set_gdbarch_frame_init_saved_regs (gdbarch, rs6000_frame_init_saved_regs);
+ set_gdbarch_init_extra_frame_info (gdbarch, rs6000_init_extra_frame_info);
+ }
+ if (!sysv_abi)
{
- error_begin ();
- fprintf_filtered (gdb_stderr,
- "`%s' is not a recognized PowerPC / RS6000 variant name.\n\n", arg);
- list_variants ();
- return_to_top_level (RETURN_ERROR);
+ /* Handle RS/6000 function pointers (which are really function
+ descriptors). */
+ set_gdbarch_convert_from_func_ptr_addr (gdbarch,
+ rs6000_convert_from_func_ptr_addr);
}
+ set_gdbarch_frame_args_address (gdbarch, rs6000_frame_args_address);
+ set_gdbarch_frame_locals_address (gdbarch, rs6000_frame_args_address);
+ set_gdbarch_saved_pc_after_call (gdbarch, rs6000_saved_pc_after_call);
- show_current_variant ();
+ /* We can't tell how many args there are
+ now that the C compiler delays popping them. */
+ set_gdbarch_frame_num_args (gdbarch, frame_num_args_unknown);
+
+ return gdbarch;
}
+static struct cmd_list_element *info_powerpc_cmdlist = NULL;
+
static void
-show_processor (char *arg, int from_tty)
+rs6000_info_powerpc_command (char *args, int from_tty)
{
- show_current_variant ();
+ help_list (info_powerpc_cmdlist, "info powerpc ", class_info, gdb_stdout);
}
-
-\f
-
/* Initialization code. */
void
-_initialize_rs6000_tdep ()
-{
- /* FIXME, this should not be decided via ifdef. */
-#ifdef GDB_TARGET_POWERPC
- tm_print_insn = gdb_print_insn_powerpc;
-#else
- tm_print_insn = print_insn_rs6000;
-#endif
-
- /* I don't think we should use the set/show command arrangement
- here, because the way that's implemented makes it hard to do the
- error checking we want in a reasonable way. So we just add them
- as two separate commands. */
- add_cmd ("processor", class_support, set_processor,
- "`set processor NAME' sets the PowerPC/RS6000 variant to NAME.\n\
-If you set this, GDB will know about the special-purpose registers that are\n\
-available on the given variant.\n\
-Type `set processor' alone for a list of recognized variant names.",
- &setlist);
- add_cmd ("processor", class_support, show_processor,
- "Show the variant of the PowerPC or RS6000 processor in use.\n\
-Use `set processor' to change this.",
- &showlist);
-
- /* Set the current PPC processor variant. */
- {
- int status = 1;
+_initialize_rs6000_tdep (void)
+{
+ register_gdbarch_init (bfd_arch_rs6000, rs6000_gdbarch_init);
+ register_gdbarch_init (bfd_arch_powerpc, rs6000_gdbarch_init);
-#ifdef TARGET_CPU_DEFAULT
- status = install_variant_by_name (TARGET_CPU_DEFAULT);
-#endif
+ /* Add root prefix command for "info powerpc" commands */
+ add_prefix_cmd ("powerpc", class_info, rs6000_info_powerpc_command,
+ "Various POWERPC info specific commands.",
+ &info_powerpc_cmdlist, "info powerpc ", 0, &infolist);
+
+ add_cmd ("altivec", class_info, rs6000_altivec_registers_info,
+ "Display the contents of the AltiVec registers.",
+ &info_powerpc_cmdlist);
- if (status)
- {
-#ifdef GDB_TARGET_POWERPC
- install_variant_by_name ("ppc-uisa");
-#else
- install_variant_by_name ("rs6000");
-#endif
- }
- }
}