#define BIG_BREAKPOINT { 0x7d, 0x82, 0x10, 0x08 }
#define LITTLE_BREAKPOINT { 0x08, 0x10, 0x82, 0x7d }
-static unsigned char *
+const static unsigned char *
rs6000_breakpoint_from_pc (CORE_ADDR *bp_addr, int *bp_size)
{
static unsigned char big_breakpoint[] = BIG_BREAKPOINT;
rs6000_software_single_step (enum target_signal signal,
int insert_breakpoints_p)
{
-#define INSNLEN(OPCODE) 4
-
- static char le_breakp[] = LITTLE_BREAKPOINT;
- static char be_breakp[] = BIG_BREAKPOINT;
- char *breakp = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? be_breakp : le_breakp;
+ CORE_ADDR dummy;
+ int breakp_sz;
+ const char *breakp = rs6000_breakpoint_from_pc (&dummy, &breakp_sz);
int ii, insn;
CORE_ADDR loc;
CORE_ADDR breaks[2];
insn = read_memory_integer (loc, 4);
- breaks[0] = loc + INSNLEN (insn);
+ breaks[0] = loc + breakp_sz;
opcode = insn >> 26;
breaks[1] = branch_dest (opcode, insn, loc, breaks[0]);
/* ignore invalid breakpoint. */
if (breaks[ii] == -1)
continue;
-
- read_memory (breaks[ii], stepBreaks[ii].data, 4);
-
- write_memory (breaks[ii], breakp, 4);
+ target_insert_breakpoint (breaks[ii], stepBreaks[ii].data);
stepBreaks[ii].address = breaks[ii];
}
/* remove step breakpoints. */
for (ii = 0; ii < 2; ++ii)
if (stepBreaks[ii].address != 0)
- write_memory
- (stepBreaks[ii].address, stepBreaks[ii].data, 4);
-
+ target_remove_breakpoint (stepBreaks[ii].address,
+ stepBreaks[ii].data);
}
errno = 0; /* FIXME, don't ignore errors! */
/* What errors? {read,write}_memory call error(). */
int nargs, struct value **args, struct type *type,
int gcc_p)
{
-#define TOC_ADDR_OFFSET 20
-#define TARGET_ADDR_OFFSET 28
-
int ii;
CORE_ADDR target_addr;
ran_out_of_registers_for_arguments:
saved_sp = read_sp ();
-#ifndef ELF_OBJECT_FORMAT
+
/* location for 8 parameters are always reserved. */
sp -= wordsize * 8;
/* stack pointer must be quadword aligned */
sp &= -16;
-#endif
/* if there are more arguments, allocate space for them in
the stack, then push them starting from the ninth one. */
rs6000_extract_return_value (struct type *valtype, char *regbuf, char *valbuf)
{
int offset = 0;
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
if (TYPE_CODE (valtype) == TYPE_CODE_FLT)
{
memcpy (valbuf, &ff, sizeof (float));
}
}
+ else if (TYPE_CODE (valtype) == TYPE_CODE_ARRAY
+ && TYPE_LENGTH (valtype) == 16
+ && TYPE_VECTOR (valtype))
+ {
+ memcpy (valbuf, regbuf + REGISTER_BYTE (tdep->ppc_vr0_regnum + 2),
+ TYPE_LENGTH (valtype));
+ }
else
{
/* return value is copied starting from r3. */
{
CORE_ADDR func_start;
struct rs6000_framedata fdata;
- int wordsize = TDEP->wordsize;
+ struct gdbarch_tdep *tdep = TDEP;
+ int wordsize = tdep->wordsize;
if (fi->signal_handler_caller)
return read_memory_addr (fi->frame + SIG_FRAME_PC_OFFSET, wordsize);
return read_memory_addr (fi->next->frame + SIG_FRAME_LR_OFFSET,
wordsize);
else
- return read_memory_addr (FRAME_CHAIN (fi) + DEFAULT_LR_SAVE,
+ return read_memory_addr (FRAME_CHAIN (fi) + tdep->lr_frame_offset,
wordsize);
}
&& fdatap->cr_offset == 0
&& fdatap->vr_offset == 0)
frame_addr = 0;
- else if (fi->prev && fi->prev->frame)
- frame_addr = fi->prev->frame;
else
- frame_addr = read_memory_addr (fi->frame, wordsize);
+ /* NOTE: cagney/2002-04-14: The ->frame points to the inner-most
+ address of the current frame. Things might be easier if the
+ ->frame pointed to the outer-most address of the frame. In the
+ mean time, the address of the prev frame is used as the base
+ address of this frame. */
+ frame_addr = FRAME_CHAIN (fi);
/* if != -1, fdatap->saved_fpr is the smallest number of saved_fpr.
All fpr's from saved_fpr to fp31 are saved. */
return fi->extra_info->initial_sp;
}
- /* This function has an alloca register. If this is the top-most frame
- (with the lowest address), the value in alloca register is good. */
-
- if (!fi->next)
- return fi->extra_info->initial_sp = read_register (fdata.alloca_reg);
-
- /* Otherwise, this is a caller frame. Callee has usually already saved
- registers, but there are exceptions (such as when the callee
- has no parameters). Find the address in which caller's alloca
- register is saved. */
-
- for (callee_fi = fi->next; callee_fi; callee_fi = callee_fi->next)
- {
-
- if (!callee_fi->saved_regs)
- frame_get_saved_regs (callee_fi, NULL);
-
- /* this is the address in which alloca register is saved. */
-
- tmpaddr = callee_fi->saved_regs[fdata.alloca_reg];
- if (tmpaddr)
- {
- fi->extra_info->initial_sp =
- read_memory_addr (tmpaddr, TDEP->wordsize);
- return fi->extra_info->initial_sp;
- }
-
- /* Go look into deeper levels of the frame chain to see if any one of
- the callees has saved alloca register. */
- }
-
- /* If alloca register was not saved, by the callee (or any of its callees)
- then the value in the register is still good. */
-
- fi->extra_info->initial_sp = read_register (fdata.alloca_reg);
+ /* There is an alloca register, use its value, in the current frame,
+ as the initial stack pointer. */
+ {
+ char *tmpbuf = alloca (MAX_REGISTER_RAW_SIZE);
+ if (frame_register_read (fi, fdata.alloca_reg, tmpbuf))
+ {
+ fi->extra_info->initial_sp
+ = extract_unsigned_integer (tmpbuf,
+ REGISTER_RAW_SIZE (fdata.alloca_reg));
+ }
+ else
+ /* NOTE: cagney/2002-04-17: At present the only time
+ frame_register_read will fail is when the register isn't
+ available. If that does happen, use the frame. */
+ fi->extra_info->initial_sp = fi->frame;
+ }
return fi->extra_info->initial_sp;
}
print_spaces_filtered (15 - strlen (REGISTER_NAME (i)), gdb_stdout);
/* Get the data in raw format. */
- if (read_relative_register_raw_bytes (i, raw_buffer))
+ if (!frame_register_read (selected_frame, i, raw_buffer))
{
printf_filtered ("*value not available*\n");
continue;
print_spaces_filtered (15 - strlen (REGISTER_NAME (i)), gdb_stdout);
/* Get the data in raw format. */
- if (read_relative_register_raw_bytes (i, raw_buffer))
+ if (!frame_register_read (selected_frame, i, raw_buffer))
{
printf_filtered ("*value not available*\n");
continue;
static void
rs6000_store_return_value (struct type *type, char *valbuf)
{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+
if (TYPE_CODE (type) == TYPE_CODE_FLT)
/* Floating point values are returned starting from FPR1 and up.
write_register_bytes (REGISTER_BYTE (FP0_REGNUM + 1), valbuf,
TYPE_LENGTH (type));
+ else if (TYPE_CODE (type) == TYPE_CODE_ARRAY)
+ {
+ if (TYPE_LENGTH (type) == 16
+ && TYPE_VECTOR (type))
+ write_register_bytes (REGISTER_BYTE (tdep->ppc_vr0_regnum + 2),
+ valbuf, TYPE_LENGTH (type));
+ }
else
/* Everything else is returned in GPR3 and up. */
write_register_bytes (REGISTER_BYTE (gdbarch_tdep (current_gdbarch)->ppc_gp0_regnum + 3),
/* 56 */ F(f24),F(f25),F(f26),F(f27),F(f28),F(f29),F(f30),F(f31), \
/* 64 */ R(pc), R(ps)
+#define COMMON_UISA_NOFP_REGS \
+ /* 0 */ R(r0), R(r1), R(r2), R(r3), R(r4), R(r5), R(r6), R(r7), \
+ /* 8 */ R(r8), R(r9), R(r10),R(r11),R(r12),R(r13),R(r14),R(r15), \
+ /* 16 */ R(r16),R(r17),R(r18),R(r19),R(r20),R(r21),R(r22),R(r23), \
+ /* 24 */ R(r24),R(r25),R(r26),R(r27),R(r28),R(r29),R(r30),R(r31), \
+ /* 32 */ R0, R0, R0, R0, R0, R0, R0, R0, \
+ /* 40 */ R0, R0, R0, R0, R0, R0, R0, R0, \
+ /* 48 */ R0, R0, R0, R0, R0, R0, R0, R0, \
+ /* 56 */ R0, R0, R0, R0, R0, R0, R0, R0, \
+ /* 64 */ R(pc), R(ps)
+
/* UISA-level SPRs for PowerPC. */
#define PPC_UISA_SPRS \
- /* 66 */ R4(cr), R(lr), R(ctr), R4(xer), R0
+ /* 66 */ R4(cr), R(lr), R(ctr), R4(xer), R4(fpscr)
/* Segment registers, for PowerPC. */
#define PPC_SEGMENT_REGS \
static const struct reg registers_power[] =
{
COMMON_UISA_REGS,
- /* 66 */ R4(cnd), R(lr), R(cnt), R4(xer), R4(mq)
+ /* 66 */ R4(cnd), R(lr), R(cnt), R4(xer), R4(mq),
+ /* 71 */ R4(fpscr)
};
/* PowerPC UISA - a PPC processor as viewed by user-level code. A UISA-only
PPC_ALTIVEC_REGS
};
+/* PowerPC UISA - a PPC processor as viewed by user-level
+ code, but without floating point registers. */
+static const struct reg registers_powerpc_nofp[] =
+{
+ COMMON_UISA_NOFP_REGS,
+ PPC_UISA_SPRS
+};
+
/* IBM PowerPC 403. */
static const struct reg registers_403[] =
{
{"7400", "Motorola/IBM PowerPC 7400 (G4)", bfd_arch_powerpc,
bfd_mach_ppc_7400, num_registers (registers_7400), registers_7400},
- /* FIXME: I haven't checked the register sets of the following. */
+ /* 64-bit */
+ {"powerpc64", "PowerPC 64-bit user-level", bfd_arch_powerpc,
+ bfd_mach_ppc64, num_registers (registers_powerpc), registers_powerpc},
{"620", "Motorola PowerPC 620", bfd_arch_powerpc,
bfd_mach_ppc_620, num_registers (registers_powerpc), registers_powerpc},
+ {"630", "Motorola PowerPC 630", bfd_arch_powerpc,
+ bfd_mach_ppc_630, num_registers (registers_powerpc), registers_powerpc},
{"a35", "PowerPC A35", bfd_arch_powerpc,
bfd_mach_ppc_a35, num_registers (registers_powerpc), registers_powerpc},
+ {"rs64ii", "PowerPC rs64ii", bfd_arch_powerpc,
+ bfd_mach_ppc_rs64ii, num_registers (registers_powerpc), registers_powerpc},
+ {"rs64iii", "PowerPC rs64iii", bfd_arch_powerpc,
+ bfd_mach_ppc_rs64iii, num_registers (registers_powerpc), registers_powerpc},
+
+ /* FIXME: I haven't checked the register sets of the following. */
{"rs1", "IBM POWER RS1", bfd_arch_rs6000,
bfd_mach_rs6k_rs1, num_registers (registers_power), registers_power},
{"rsc", "IBM POWER RSC", bfd_arch_rs6000,
unsigned long mach;
bfd abfd;
int osabi, sysv_abi;
+ gdbarch_print_insn_ftype *print_insn;
from_xcoff_exec = info.abfd && info.abfd->format == bfd_object &&
bfd_get_flavour (info.abfd) == bfd_target_xcoff_flavour;
}
else
{
- wordsize = 4;
+ if (info.bfd_arch_info != NULL && info.bfd_arch_info->bits_per_word != 0)
+ wordsize = info.bfd_arch_info->bits_per_word /
+ info.bfd_arch_info->bits_per_byte;
+ else
+ wordsize = 4;
}
/* Find a candidate among extant architectures. */
gdbarch = gdbarch_alloc (&info, tdep);
power = arch == bfd_arch_rs6000;
- /* Select instruction printer. */
- tm_print_insn = arch == power ? print_insn_rs6000 :
- info.byte_order == BFD_ENDIAN_BIG ? print_insn_big_powerpc :
- print_insn_little_powerpc;
-
/* Choose variant. */
v = find_variant_by_arch (arch, mach);
if (!v)
tdep->ppc_xer_regnum = 69;
if (v->mach == bfd_mach_ppc_601)
tdep->ppc_mq_regnum = 124;
- else
+ else if (power)
tdep->ppc_mq_regnum = 70;
+ else
+ tdep->ppc_mq_regnum = -1;
+ tdep->ppc_fpscr_regnum = power ? 71 : 70;
if (v->arch == bfd_arch_powerpc)
switch (v->mach)
break;
}
- /* Calculate byte offsets in raw register array. */
+ /* Set lr_frame_offset. */
+ if (wordsize == 8)
+ tdep->lr_frame_offset = 16;
+ else if (sysv_abi)
+ tdep->lr_frame_offset = 4;
+ else
+ tdep->lr_frame_offset = 8;
+
+ /* Calculate byte offsets in raw register array. */
tdep->regoff = xmalloc (v->nregs * sizeof (int));
for (i = off = 0; i < v->nregs; i++)
{
off += regsize (v->regs + i, wordsize);
}
+ /* Select instruction printer. */
+ if (arch == power)
+ print_insn = print_insn_rs6000;
+ else if (info.byte_order == BFD_ENDIAN_BIG)
+ print_insn = print_insn_big_powerpc;
+ else
+ print_insn = print_insn_little_powerpc;
+ set_gdbarch_print_insn (gdbarch, print_insn);
+
set_gdbarch_read_pc (gdbarch, generic_target_read_pc);
set_gdbarch_write_pc (gdbarch, generic_target_write_pc);
set_gdbarch_read_fp (gdbarch, generic_target_read_fp);
set_gdbarch_extract_return_value (gdbarch, rs6000_extract_return_value);
- if (sysv_abi)
+ /* Note: kevinb/2002-04-12: I'm not convinced that rs6000_push_arguments()
+ is correct for the SysV ABI when the wordsize is 8, but I'm also
+ fairly certain that ppc_sysv_abi_push_arguments() will give even
+ worse results since it only works for 32-bit code. So, for the moment,
+ we're better off calling rs6000_push_arguments() since it works for
+ 64-bit code. At some point in the future, this matter needs to be
+ revisited. */
+ if (sysv_abi && wordsize == 4)
set_gdbarch_push_arguments (gdbarch, ppc_sysv_abi_push_arguments);
else
set_gdbarch_push_arguments (gdbarch, rs6000_push_arguments);
|| osabi == ELFOSABI_NETBSD
|| osabi == ELFOSABI_FREEBSD)
set_gdbarch_use_struct_convention (gdbarch,
- generic_use_struct_convention);
+ ppc_sysv_abi_broken_use_struct_convention);
else
set_gdbarch_use_struct_convention (gdbarch,
ppc_sysv_abi_use_struct_convention);
}
set_gdbarch_frame_chain_valid (gdbarch, file_frame_chain_valid);
- if (osabi == ELFOSABI_LINUX)
+ /* Note: kevinb/2002-04-12: See note above regarding *_push_arguments().
+ The same remarks hold for the methods below. */
+ if (osabi == ELFOSABI_LINUX && wordsize == 4)
{
set_gdbarch_frameless_function_invocation (gdbarch,
ppc_linux_frameless_function_invocation);
set_gdbarch_frame_init_saved_regs (gdbarch, rs6000_frame_init_saved_regs);
set_gdbarch_init_extra_frame_info (gdbarch, rs6000_init_extra_frame_info);
-
- /* Handle RS/6000 function pointers. */
+ }
+ if (!sysv_abi)
+ {
+ /* Handle RS/6000 function pointers (which are really function
+ descriptors). */
set_gdbarch_convert_from_func_ptr_addr (gdbarch,
rs6000_convert_from_func_ptr_addr);
}