/* Serial interface for local (hardwired) serial ports on Un*x like systems
- Copyright 1992-1994, 1998-2000, 2001 Free Software Foundation, Inc.
+
+ Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2003,
+ 2004, 2005, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "serial.h"
+#include "ser-base.h"
#include "ser-unix.h"
#include <fcntl.h>
#include <sys/socket.h>
#include <sys/time.h>
+#include "gdb_select.h"
#include "gdb_string.h"
-#include "event-loop.h"
+#include "gdbcmd.h"
#ifdef HAVE_TERMIOS
{
struct termios termios;
};
+
+#ifdef CRTSCTS
+/* Boolean to explicitly enable or disable h/w flow control. */
+static int serial_hwflow;
+static void
+show_serial_hwflow (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("Hardware flow control is %s.\n"), value);
+}
+#endif
+
#endif /* termios */
#ifdef HAVE_TERMIO
};
#endif /* sgtty */
-static int hardwire_open (serial_t scb, const char *name);
-static void hardwire_raw (serial_t scb);
-static int wait_for (serial_t scb, int timeout);
-static int hardwire_readchar (serial_t scb, int timeout);
-static int do_hardwire_readchar (serial_t scb, int timeout);
-static int generic_readchar (serial_t scb, int timeout, int (*do_readchar) (serial_t scb, int timeout));
+static int hardwire_open (struct serial *scb, const char *name);
+static void hardwire_raw (struct serial *scb);
+static int wait_for (struct serial *scb, int timeout);
+static int hardwire_readchar (struct serial *scb, int timeout);
+static int do_hardwire_readchar (struct serial *scb, int timeout);
static int rate_to_code (int rate);
-static int hardwire_setbaudrate (serial_t scb, int rate);
-static void hardwire_close (serial_t scb);
-static int get_tty_state (serial_t scb, struct hardwire_ttystate * state);
-static int set_tty_state (serial_t scb, struct hardwire_ttystate * state);
-static serial_ttystate hardwire_get_tty_state (serial_t scb);
-static int hardwire_set_tty_state (serial_t scb, serial_ttystate state);
-static int hardwire_noflush_set_tty_state (serial_t, serial_ttystate,
- serial_ttystate);
-static void hardwire_print_tty_state (serial_t, serial_ttystate, struct ui_file *);
-static int hardwire_drain_output (serial_t);
-static int hardwire_flush_output (serial_t);
-static int hardwire_flush_input (serial_t);
-static int hardwire_send_break (serial_t);
-static int hardwire_setstopbits (serial_t, int);
-
-static int do_unix_readchar (serial_t scb, int timeout);
-static timer_handler_func push_event;
-static handler_func fd_event;
-static void reschedule (serial_t scb);
+static int hardwire_setbaudrate (struct serial *scb, int rate);
+static void hardwire_close (struct serial *scb);
+static int get_tty_state (struct serial *scb,
+ struct hardwire_ttystate * state);
+static int set_tty_state (struct serial *scb,
+ struct hardwire_ttystate * state);
+static serial_ttystate hardwire_get_tty_state (struct serial *scb);
+static int hardwire_set_tty_state (struct serial *scb, serial_ttystate state);
+static int hardwire_noflush_set_tty_state (struct serial *, serial_ttystate,
+ serial_ttystate);
+static void hardwire_print_tty_state (struct serial *, serial_ttystate,
+ struct ui_file *);
+static int hardwire_drain_output (struct serial *);
+static int hardwire_flush_output (struct serial *);
+static int hardwire_flush_input (struct serial *);
+static int hardwire_send_break (struct serial *);
+static int hardwire_setstopbits (struct serial *, int);
void _initialize_ser_hardwire (void);
-extern int (*ui_loop_hook) (int);
-
/* Open up a real live device for serial I/O */
static int
-hardwire_open (serial_t scb, const char *name)
+hardwire_open (struct serial *scb, const char *name)
{
scb->fd = open (name, O_RDWR);
if (scb->fd < 0)
}
static int
-get_tty_state (serial_t scb, struct hardwire_ttystate *state)
+get_tty_state (struct serial *scb, struct hardwire_ttystate *state)
{
#ifdef HAVE_TERMIOS
if (tcgetattr (scb->fd, &state->termios) < 0)
}
static int
-set_tty_state (serial_t scb, struct hardwire_ttystate *state)
+set_tty_state (struct serial *scb, struct hardwire_ttystate *state)
{
#ifdef HAVE_TERMIOS
if (tcsetattr (scb->fd, TCSANOW, &state->termios) < 0)
}
static serial_ttystate
-hardwire_get_tty_state (serial_t scb)
+hardwire_get_tty_state (struct serial *scb)
{
struct hardwire_ttystate *state;
}
static int
-hardwire_set_tty_state (serial_t scb, serial_ttystate ttystate)
+hardwire_set_tty_state (struct serial *scb, serial_ttystate ttystate)
{
struct hardwire_ttystate *state;
}
static int
-hardwire_noflush_set_tty_state (serial_t scb,
+hardwire_noflush_set_tty_state (struct serial *scb,
serial_ttystate new_ttystate,
serial_ttystate old_ttystate)
{
}
static void
-hardwire_print_tty_state (serial_t scb,
+hardwire_print_tty_state (struct serial *scb,
serial_ttystate ttystate,
struct ui_file *stream)
{
/* Wait for the output to drain away, as opposed to flushing (discarding) it */
static int
-hardwire_drain_output (serial_t scb)
+hardwire_drain_output (struct serial *scb)
{
#ifdef HAVE_TERMIOS
return tcdrain (scb->fd);
to be discarded. */
{
struct hardwire_ttystate state;
+
if (get_tty_state (scb, &state))
{
return (-1);
}
static int
-hardwire_flush_output (serial_t scb)
+hardwire_flush_output (struct serial *scb)
{
#ifdef HAVE_TERMIOS
return tcflush (scb->fd, TCOFLUSH);
}
static int
-hardwire_flush_input (serial_t scb)
+hardwire_flush_input (struct serial *scb)
{
- ser_unix_flush_input (scb);
+ ser_base_flush_input (scb);
#ifdef HAVE_TERMIOS
return tcflush (scb->fd, TCIFLUSH);
}
static int
-hardwire_send_break (serial_t scb)
+hardwire_send_break (struct serial *scb)
{
#ifdef HAVE_TERMIOS
return tcsendbreak (scb->fd, 0);
#ifdef HAVE_SGTTY
{
int status;
- struct timeval timeout;
status = ioctl (scb->fd, TIOCSBRK, 0);
/* Can't use usleep; it doesn't exist in BSD 4.2. */
- /* Note that if this select() is interrupted by a signal it will not wait
- the full length of time. I think that is OK. */
- timeout.tv_sec = 0;
- timeout.tv_usec = 250000;
- select (0, 0, 0, 0, &timeout);
+ /* Note that if this gdb_select() is interrupted by a signal it will not
+ wait the full length of time. I think that is OK. */
+ gdb_usleep (250000);
status = ioctl (scb->fd, TIOCCBRK, 0);
return status;
}
}
static void
-hardwire_raw (serial_t scb)
+hardwire_raw (struct serial *scb)
{
struct hardwire_ttystate state;
state.termios.c_lflag = 0;
state.termios.c_cflag &= ~(CSIZE | PARENB);
state.termios.c_cflag |= CLOCAL | CS8;
+#ifdef CRTSCTS
+ /* h/w flow control. */
+ if (serial_hwflow)
+ state.termios.c_cflag |= CRTSCTS;
+ else
+ state.termios.c_cflag &= ~CRTSCTS;
+#ifdef CRTS_IFLOW
+ if (serial_hwflow)
+ state.termios.c_cflag |= CRTS_IFLOW;
+ else
+ state.termios.c_cflag &= ~CRTS_IFLOW;
+#endif
+#endif
state.termios.c_cc[VMIN] = 0;
state.termios.c_cc[VTIME] = 0;
#endif
*/
/* FIXME: cagney/1999-09-16: Don't replace this with the equivalent
- ser_unix*() until the old TERMIOS/SGTTY/... timer code has been
+ ser_base*() until the old TERMIOS/SGTTY/... timer code has been
flushed. . */
/* NOTE: cagney/1999-09-30: Much of the code below is dead. The only
an overflowed timer is unnecessary. */
static int
-wait_for (serial_t scb, int timeout)
+wait_for (struct serial *scb, int timeout)
{
#ifdef HAVE_SGTTY
while (1)
FD_SET (scb->fd, &readfds);
if (timeout >= 0)
- numfds = select (scb->fd + 1, &readfds, 0, 0, &tv);
+ numfds = gdb_select (scb->fd + 1, &readfds, 0, 0, &tv);
else
- numfds = select (scb->fd + 1, &readfds, 0, 0, 0);
+ numfds = gdb_select (scb->fd + 1, &readfds, 0, 0, 0);
if (numfds <= 0)
if (numfds == 0)
dropped dead, or SERIAL_ERROR for any other error (see errno in that case). */
/* FIXME: cagney/1999-09-16: Don't replace this with the equivalent
- ser_unix*() until the old TERMIOS/SGTTY/... timer code has been
+ ser_base*() until the old TERMIOS/SGTTY/... timer code has been
flushed. */
/* NOTE: cagney/1999-09-16: This function is not identical to
- ser_unix_readchar() as part of replacing it with ser_unix*()
+ ser_base_readchar() as part of replacing it with ser_base*()
merging will be required - this code handles the case where read()
- times out due to no data while ser_unix_readchar() doesn't expect
+ times out due to no data while ser_base_readchar() doesn't expect
that. */
static int
-do_hardwire_readchar (serial_t scb, int timeout)
+do_hardwire_readchar (struct serial *scb, int timeout)
{
int status, delta;
int detach = 0;
if (timeout > 0)
timeout++;
- /* We have to be able to keep the GUI alive here, so we break the original
- timeout into steps of 1 second, running the "keep the GUI alive" hook
- each time through the loop.
- Also, timeout = 0 means to poll, so we just set the delta to 0, so we
- will only go through the loop once. */
+ /* We have to be able to keep the GUI alive here, so we break the
+ original timeout into steps of 1 second, running the "keep the
+ GUI alive" hook each time through the loop.
+
+ Also, timeout = 0 means to poll, so we just set the delta to 0,
+ so we will only go through the loop once. */
delta = (timeout == 0 ? 0 : 1);
while (1)
/* N.B. The UI may destroy our world (for instance by calling
remote_stop,) in which case we want to get out of here as
quickly as possible. It is not safe to touch scb, since
- someone else might have freed it. The ui_loop_hook signals that
- we should exit by returning 1. */
+ someone else might have freed it. The
+ deprecated_ui_loop_hook signals that we should exit by
+ returning 1. */
- if (ui_loop_hook)
- detach = ui_loop_hook (0);
+ if (deprecated_ui_loop_hook)
+ detach = deprecated_ui_loop_hook (0);
if (detach)
return SERIAL_TIMEOUT;
}
static int
-hardwire_readchar (serial_t scb, int timeout)
+hardwire_readchar (struct serial *scb, int timeout)
{
return generic_readchar (scb, timeout, do_hardwire_readchar);
}
int i;
for (i = 0; baudtab[i].rate != -1; i++)
- if (rate == baudtab[i].rate)
- return baudtab[i].code;
-
+ {
+ /* test for perfect macth. */
+ if (rate == baudtab[i].rate)
+ return baudtab[i].code;
+ else
+ {
+ /* check if it is in between valid values. */
+ if (rate < baudtab[i].rate)
+ {
+ if (i)
+ {
+ warning (_("Invalid baud rate %d. Closest values are %d and %d."),
+ rate, baudtab[i - 1].rate, baudtab[i].rate);
+ }
+ else
+ {
+ warning (_("Invalid baud rate %d. Minimum value is %d."),
+ rate, baudtab[0].rate);
+ }
+ return -1;
+ }
+ }
+ }
+
+ /* The requested speed was too large. */
+ warning (_("Invalid baud rate %d. Maximum value is %d."),
+ rate, baudtab[i - 1].rate);
return -1;
}
static int
-hardwire_setbaudrate (serial_t scb, int rate)
+hardwire_setbaudrate (struct serial *scb, int rate)
{
struct hardwire_ttystate state;
+ int baud_code = rate_to_code (rate);
+
+ if (baud_code < 0)
+ {
+ /* The baud rate was not valid.
+ A warning has already been issued. */
+ errno = EINVAL;
+ return -1;
+ }
if (get_tty_state (scb, &state))
return -1;
#ifdef HAVE_TERMIOS
- cfsetospeed (&state.termios, rate_to_code (rate));
- cfsetispeed (&state.termios, rate_to_code (rate));
+ cfsetospeed (&state.termios, baud_code);
+ cfsetispeed (&state.termios, baud_code);
#endif
#ifdef HAVE_TERMIO
#endif
state.termio.c_cflag &= ~(CBAUD | CIBAUD);
- state.termio.c_cflag |= rate_to_code (rate);
+ state.termio.c_cflag |= baud_code;
#endif
#ifdef HAVE_SGTTY
- state.sgttyb.sg_ispeed = rate_to_code (rate);
- state.sgttyb.sg_ospeed = rate_to_code (rate);
+ state.sgttyb.sg_ispeed = baud_code;
+ state.sgttyb.sg_ospeed = baud_code;
#endif
return set_tty_state (scb, &state);
}
static int
-hardwire_setstopbits (serial_t scb, int num)
+hardwire_setstopbits (struct serial *scb, int num)
{
struct hardwire_ttystate state;
int newbit;
}
static void
-hardwire_close (serial_t scb)
+hardwire_close (struct serial *scb)
{
if (scb->fd < 0)
return;
close (scb->fd);
scb->fd = -1;
}
-
\f
-/* Generic operations used by all UNIX/FD based serial interfaces. */
-
-serial_ttystate
-ser_unix_nop_get_tty_state (serial_t scb)
-{
- /* allocate a dummy */
- return (serial_ttystate) XMALLOC (int);
-}
-
-int
-ser_unix_nop_set_tty_state (serial_t scb, serial_ttystate ttystate)
-{
- return 0;
-}
-
-void
-ser_unix_nop_raw (serial_t scb)
-{
- return; /* Always in raw mode */
-}
-
-/* Wait for input on scb, with timeout seconds. Returns 0 on success,
- otherwise SERIAL_TIMEOUT or SERIAL_ERROR. */
-
-int
-ser_unix_wait_for (serial_t scb, int timeout)
-{
- while (1)
- {
- int numfds;
- struct timeval tv;
- fd_set readfds, exceptfds;
-
- /* NOTE: Some OS's can scramble the READFDS when the select()
- call fails (ex the kernel with Red Hat 5.2). Initialize all
- arguments before each call. */
-
- tv.tv_sec = timeout;
- tv.tv_usec = 0;
-
- FD_ZERO (&readfds);
- FD_ZERO (&exceptfds);
- FD_SET (scb->fd, &readfds);
- FD_SET (scb->fd, &exceptfds);
-
- if (timeout >= 0)
- numfds = select (scb->fd + 1, &readfds, 0, &exceptfds, &tv);
- else
- numfds = select (scb->fd + 1, &readfds, 0, &exceptfds, 0);
-
- if (numfds <= 0)
- {
- if (numfds == 0)
- return SERIAL_TIMEOUT;
- else if (errno == EINTR)
- continue;
- else
- return SERIAL_ERROR; /* Got an error from select or poll */
- }
-
- return 0;
- }
-}
-
-/* Read a character with user-specified timeout. TIMEOUT is number of seconds
- to wait, or -1 to wait forever. Use timeout of 0 to effect a poll. Returns
- char if successful. Returns -2 if timeout expired, EOF if line dropped
- dead, or -3 for any other error (see errno in that case). */
-
-static int
-do_unix_readchar (serial_t scb, int timeout)
-{
- int status;
- int delta;
-
- /* We have to be able to keep the GUI alive here, so we break the original
- timeout into steps of 1 second, running the "keep the GUI alive" hook
- each time through the loop.
-
- Also, timeout = 0 means to poll, so we just set the delta to 0, so we
- will only go through the loop once. */
-
- delta = (timeout == 0 ? 0 : 1);
- while (1)
- {
-
- /* N.B. The UI may destroy our world (for instance by calling
- remote_stop,) in which case we want to get out of here as
- quickly as possible. It is not safe to touch scb, since
- someone else might have freed it. The ui_loop_hook signals that
- we should exit by returning 1. */
-
- if (ui_loop_hook)
- {
- if (ui_loop_hook (0))
- return SERIAL_TIMEOUT;
- }
-
- status = ser_unix_wait_for (scb, delta);
- if (timeout > 0)
- timeout -= delta;
-
- /* If we got a character or an error back from wait_for, then we can
- break from the loop before the timeout is completed. */
-
- if (status != SERIAL_TIMEOUT)
- {
- break;
- }
-
- /* If we have exhausted the original timeout, then generate
- a SERIAL_TIMEOUT, and pass it out of the loop. */
-
- else if (timeout == 0)
- {
- status = SERIAL_TIMEOUT;
- break;
- }
- }
-
- if (status < 0)
- return status;
-
- while (1)
- {
- status = read (scb->fd, scb->buf, BUFSIZ);
- if (status != -1 || errno != EINTR)
- break;
- }
-
- if (status <= 0)
- {
- if (status == 0)
- return SERIAL_TIMEOUT; /* 0 chars means timeout [may need to
- distinguish between EOF & timeouts
- someday] */
- else
- return SERIAL_ERROR; /* Got an error from read */
- }
-
- scb->bufcnt = status;
- scb->bufcnt--;
- scb->bufp = scb->buf;
- return *scb->bufp++;
-}
-
-/* Perform operations common to both old and new readchar. */
-
-/* Return the next character from the input FIFO. If the FIFO is
- empty, call the SERIAL specific routine to try and read in more
- characters.
-
- Initially data from the input FIFO is returned (fd_event()
- pre-reads the input into that FIFO. Once that has been emptied,
- further data is obtained by polling the input FD using the device
- specific readchar() function. Note: reschedule() is called after
- every read. This is because there is no guarentee that the lower
- level fd_event() poll_event() code (which also calls reschedule())
- will be called. */
-
-static int
-generic_readchar (serial_t scb, int timeout,
- int (do_readchar) (serial_t scb, int timeout))
-{
- int ch;
- if (scb->bufcnt > 0)
- {
- ch = *scb->bufp;
- scb->bufcnt--;
- scb->bufp++;
- }
- else if (scb->bufcnt < 0)
- {
- /* Some errors/eof are are sticky. */
- ch = scb->bufcnt;
- }
- else
- {
- ch = do_readchar (scb, timeout);
- if (ch < 0)
- {
- switch ((enum serial_rc) ch)
- {
- case SERIAL_EOF:
- case SERIAL_ERROR:
- /* Make the error/eof stick. */
- scb->bufcnt = ch;
- break;
- case SERIAL_TIMEOUT:
- scb->bufcnt = 0;
- break;
- }
- }
- }
- reschedule (scb);
- return ch;
-}
-
-int
-ser_unix_readchar (serial_t scb, int timeout)
-{
- return generic_readchar (scb, timeout, do_unix_readchar);
-}
-
-int
-ser_unix_nop_noflush_set_tty_state (serial_t scb,
- serial_ttystate new_ttystate,
- serial_ttystate old_ttystate)
-{
- return 0;
-}
-
-void
-ser_unix_nop_print_tty_state (serial_t scb,
- serial_ttystate ttystate,
- struct ui_file *stream)
-{
- /* Nothing to print. */
- return;
-}
-
-int
-ser_unix_nop_setbaudrate (serial_t scb, int rate)
-{
- return 0; /* Never fails! */
-}
-
-int
-ser_unix_nop_setstopbits (serial_t scb, int num)
-{
- return 0; /* Never fails! */
-}
-
-int
-ser_unix_write (serial_t scb, const char *str, int len)
-{
- int cc;
-
- while (len > 0)
- {
- cc = write (scb->fd, str, len);
-
- if (cc < 0)
- return 1;
- len -= cc;
- str += cc;
- }
- return 0;
-}
-
-int
-ser_unix_nop_flush_output (serial_t scb)
-{
- return 0;
-}
-
-int
-ser_unix_flush_input (serial_t scb)
-{
- if (scb->bufcnt >= 0)
- {
- scb->bufcnt = 0;
- scb->bufp = scb->buf;
- return 0;
- }
- else
- return SERIAL_ERROR;
-}
-
-int
-ser_unix_nop_send_break (serial_t scb)
-{
- return 0;
-}
-
-int
-ser_unix_nop_drain_output (serial_t scb)
-{
- return 0;
-}
-
-
\f
-/* Event handling for ASYNC serial code.
-
- At any time the SERIAL device either: has an empty FIFO and is
- waiting on a FD event; or has a non-empty FIFO/error condition and
- is constantly scheduling timer events.
-
- ASYNC only stops pestering its client when it is de-async'ed or it
- is told to go away. */
-
-/* Value of scb->async_state: */
-enum {
- /* >= 0 (TIMER_SCHEDULED) */
- /* The ID of the currently scheduled timer event. This state is
- rarely encountered. Timer events are one-off so as soon as the
- event is delivered the state is shanged to NOTHING_SCHEDULED. */
- FD_SCHEDULED = -1,
- /* The fd_event() handler is scheduled. It is called when ever the
- file descriptor becomes ready. */
- NOTHING_SCHEDULED = -2
- /* Either no task is scheduled (just going into ASYNC mode) or a
- timer event has just gone off and the current state has been
- forced into nothing scheduled. */
-};
-
-/* Identify and schedule the next ASYNC task based on scb->async_state
- and scb->buf* (the input FIFO). A state machine is used to avoid
- the need to make redundant calls into the event-loop - the next
- scheduled task is only changed when needed. */
-
-static void
-reschedule (serial_t scb)
-{
- if (SERIAL_IS_ASYNC_P (scb))
- {
- int next_state;
- switch (scb->async_state)
- {
- case FD_SCHEDULED:
- if (scb->bufcnt == 0)
- next_state = FD_SCHEDULED;
- else
- {
- delete_file_handler (scb->fd);
- next_state = create_timer (0, push_event, scb);
- }
- break;
- case NOTHING_SCHEDULED:
- if (scb->bufcnt == 0)
- {
- add_file_handler (scb->fd, fd_event, scb);
- next_state = FD_SCHEDULED;
- }
- else
- {
- next_state = create_timer (0, push_event, scb);
- }
- break;
- default: /* TIMER SCHEDULED */
- if (scb->bufcnt == 0)
- {
- delete_timer (scb->async_state);
- add_file_handler (scb->fd, fd_event, scb);
- next_state = FD_SCHEDULED;
- }
- else
- next_state = scb->async_state;
- break;
- }
- if (SERIAL_DEBUG_P (scb))
- {
- switch (next_state)
- {
- case FD_SCHEDULED:
- if (scb->async_state != FD_SCHEDULED)
- fprintf_unfiltered (gdb_stdlog, "[fd%d->fd-scheduled]\n",
- scb->fd);
- break;
- default: /* TIMER SCHEDULED */
- if (scb->async_state == FD_SCHEDULED)
- fprintf_unfiltered (gdb_stdlog, "[fd%d->timer-scheduled]\n",
- scb->fd);
- break;
- }
- }
- scb->async_state = next_state;
- }
-}
-
-/* FD_EVENT: This is scheduled when the input FIFO is empty (and there
- is no pending error). As soon as data arrives, it is read into the
- input FIFO and the client notified. The client should then drain
- the FIFO using readchar(). If the FIFO isn't immediatly emptied,
- push_event() is used to nag the client until it is. */
-
-static void
-fd_event (int error, void *context)
-{
- serial_t scb = context;
- if (error != 0)
- {
- scb->bufcnt = SERIAL_ERROR;
- }
- else if (scb->bufcnt == 0)
- {
- /* Prime the input FIFO. The readchar() function is used to
- pull characters out of the buffer. See also
- generic_readchar(). */
- int nr;
- do
- {
- nr = read (scb->fd, scb->buf, BUFSIZ);
- }
- while (nr == -1 && errno == EINTR);
- if (nr == 0)
- {
- scb->bufcnt = SERIAL_EOF;
- }
- else if (nr > 0)
- {
- scb->bufcnt = nr;
- scb->bufp = scb->buf;
- }
- else
- {
- scb->bufcnt = SERIAL_ERROR;
- }
- }
- scb->async_handler (scb, scb->async_context);
- reschedule (scb);
-}
-
-/* PUSH_EVENT: The input FIFO is non-empty (or there is a pending
- error). Nag the client until all the data has been read. In the
- case of errors, the client will need to close or de-async the
- device before naging stops. */
-
-static void
-push_event (void *context)
-{
- serial_t scb = context;
- scb->async_state = NOTHING_SCHEDULED; /* Timers are one-off */
- scb->async_handler (scb, scb->async_context);
- /* re-schedule */
- reschedule (scb);
-}
-
-/* Put the SERIAL device into/out-of ASYNC mode. */
-
-void
-ser_unix_async (serial_t scb,
- int async_p)
-{
- if (async_p)
- {
- /* Force a re-schedule. */
- scb->async_state = NOTHING_SCHEDULED;
- if (SERIAL_DEBUG_P (scb))
- fprintf_unfiltered (gdb_stdlog, "[fd%d->asynchronous]\n",
- scb->fd);
- reschedule (scb);
- }
- else
- {
- if (SERIAL_DEBUG_P (scb))
- fprintf_unfiltered (gdb_stdlog, "[fd%d->synchronous]\n",
- scb->fd);
- /* De-schedule whatever tasks are currently scheduled. */
- switch (scb->async_state)
- {
- case FD_SCHEDULED:
- delete_file_handler (scb->fd);
- break;
- NOTHING_SCHEDULED:
- break;
- default: /* TIMER SCHEDULED */
- delete_timer (scb->async_state);
- break;
- }
- }
-}
-
void
_initialize_ser_hardwire (void)
{
struct serial_ops *ops = XMALLOC (struct serial_ops);
- memset (ops, sizeof (struct serial_ops), 0);
+
+ memset (ops, 0, sizeof (struct serial_ops));
ops->name = "hardwire";
ops->next = 0;
ops->open = hardwire_open;
ops->close = hardwire_close;
- /* FIXME: Don't replace this with the equivalent ser_unix*() until
+ /* FIXME: Don't replace this with the equivalent ser_base*() until
the old TERMIOS/SGTTY/... timer code has been flushed. cagney
1999-09-16. */
ops->readchar = hardwire_readchar;
- ops->write = ser_unix_write;
+ ops->write = ser_base_write;
ops->flush_output = hardwire_flush_output;
ops->flush_input = hardwire_flush_input;
ops->send_break = hardwire_send_break;
ops->setbaudrate = hardwire_setbaudrate;
ops->setstopbits = hardwire_setstopbits;
ops->drain_output = hardwire_drain_output;
- ops->async = ser_unix_async;
+ ops->async = ser_base_async;
+ ops->read_prim = ser_unix_read_prim;
+ ops->write_prim = ser_unix_write_prim;
serial_add_interface (ops);
+
+#ifdef HAVE_TERMIOS
+#ifdef CRTSCTS
+ add_setshow_boolean_cmd ("remoteflow", no_class,
+ &serial_hwflow, _("\
+Set use of hardware flow control for remote serial I/O."), _("\
+Show use of hardware flow control for remote serial I/O."), _("\
+Enable or disable hardware flow control (RTS/CTS) on the serial port\n\
+when debugging using remote targets."),
+ NULL,
+ show_serial_hwflow,
+ &setlist, &showlist);
+#endif
+#endif
+}
+
+int
+ser_unix_read_prim (struct serial *scb, size_t count)
+{
+ int status;
+
+ while (1)
+ {
+ status = read (scb->fd, scb->buf, count);
+ if (status != -1 || errno != EINTR)
+ break;
+ }
+ return status;
+}
+
+int
+ser_unix_write_prim (struct serial *scb, const void *buf, size_t len)
+{
+ /* ??? Historically, GDB has not retried calls to "write" that
+ result in EINTR. */
+ return write (scb->fd, buf, len);
}