/* Remote serial support interface definitions for GDB, the GNU Debugger.
- Copyright 1992, 1993, 1999 Free Software Foundation, Inc.
+ Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000
+ Free Software Foundation, Inc.
This file is part of GDB.
interface. */
typedef void *serial_ttystate;
-struct _serial_t;
-typedef struct _serial_t *serial_t;
+struct serial;
-/* Try to open NAME. Returns a new serial_t on success, NULL on
- failure. */
+/* Try to open NAME. Returns a new `struct serial *' on success, NULL
+ on failure. Note that some open calls can block and, if possible,
+ should be written to be non-blocking, with calls to ui_look_hook
+ so they can be cancelled. An async interface for open could be
+ added to GDB if necessary. */
-extern serial_t serial_open (const char *name);
-#define SERIAL_OPEN(NAME) serial_open(NAME)
+extern struct serial *serial_open (const char *name);
/* Open a new serial stream using a file handle. */
-extern serial_t serial_fdopen (const int fd);
-#define SERIAL_FDOPEN(FD) serial_fdopen(FD)
+extern struct serial *serial_fdopen (const int fd);
-/* Push out all buffers, close the device and destroy SERIAL_T. */
+/* Push out all buffers, close the device and destroy SCB. */
-extern void serial_close (serial_t);
-#define SERIAL_CLOSE(SERIAL_T) serial_close ((SERIAL_T))
+extern void serial_close (struct serial *scb);
-/* Push out all buffers and destroy SERIAL_T without closing the
- device. */
+/* Push out all buffers and destroy SCB without closing the device. */
-extern void serial_un_fdopen (serial_t scb);
-#define SERIAL_UN_FDOPEN(SERIAL_T) serial_un_fdopen ((SERIAL_T))
+extern void serial_un_fdopen (struct serial *scb);
/* Read one char from the serial device with TIMEOUT seconds to wait
- or -1 to wait forever. Use timeout of 0 to effect a poll. Returns
- unsigned char if ok, else one of the following codes. Note that
- all error return-codes are guaranteed to be < 0. */
+ or -1 to wait forever. Use timeout of 0 to effect a poll.
+ Infinite waits are not permitted. Returns unsigned char if ok, else
+ one of the following codes. Note that all error return-codes are
+ guaranteed to be < 0. */
enum serial_rc {
SERIAL_ERROR = -1, /* General error. */
- SERIAL_TIMEOUT = -2, /* Timeout during read. ui_loop_hook() can,
- unfortunatly, force this to be returned. */
+ SERIAL_TIMEOUT = -2, /* Timeout or data-not-ready during read.
+ Unfortunately, through ui_loop_hook(), this
+ can also be a QUIT indication. */
SERIAL_EOF = -3 /* General end-of-file or remote target
connection closed, indication. Includes
things like the line dropping dead. */
};
-extern int serial_readchar (serial_t scb, int timeout);
-#define SERIAL_READCHAR(SERIAL_T, TIMEOUT) serial_readchar ((SERIAL_T), (TIMEOUT))
+extern int serial_readchar (struct serial *scb, int timeout);
-/* Write LEN chars from STRING to the port SERIAL_T. Returns 0 for
+/* Write LEN chars from STRING to the port SCB. Returns 0 for
success, non-zero for failure. */
-extern int serial_write (serial_t scb, const char *str, int len);
-#define SERIAL_WRITE(SERIAL_T, STRING,LEN) serial_write (SERIAL_T, STRING, LEN)
+extern int serial_write (struct serial *scb, const char *str, int len);
/* Write a printf style string onto the serial port. */
-extern void serial_printf (serial_t desc, const char *,...) ATTR_FORMAT (printf, 2, 3);
+extern void serial_printf (struct serial *desc, const char *,...) ATTR_FORMAT (printf, 2, 3);
/* Allow pending output to drain. */
-extern int serial_drain_output (serial_t);
-#define SERIAL_DRAIN_OUTPUT(SERIAL_T) serial_drain_output ((SERIAL_T))
+extern int serial_drain_output (struct serial *);
/* Flush (discard) pending output. Might also flush input (if this
system can't flush only output). */
-extern int serial_flush_output (serial_t);
-#define SERIAL_FLUSH_OUTPUT(SERIAL_T) serial_flush_output ((SERIAL_T))
+extern int serial_flush_output (struct serial *);
/* Flush pending input. Might also flush output (if this system can't
flush only input). */
-extern int serial_flush_input (serial_t);
-#define SERIAL_FLUSH_INPUT(SERIAL_T) serial_flush_input ((SERIAL_T))
+extern int serial_flush_input (struct serial *);
/* Send a break between 0.25 and 0.5 seconds long. */
-extern int serial_send_break (serial_t scb);
-#define SERIAL_SEND_BREAK(SERIAL_T) serial_send_break (SERIAL_T)
+extern int serial_send_break (struct serial *scb);
/* Turn the port into raw mode. */
-extern void serial_raw (serial_t scb);
-#define SERIAL_RAW(SERIAL_T) serial_raw ((SERIAL_T))
+extern void serial_raw (struct serial *scb);
/* Return a pointer to a newly malloc'd ttystate containing the state
of the tty. */
-extern serial_ttystate serial_get_tty_state (serial_t scb);
-#define SERIAL_GET_TTY_STATE(SERIAL_T) serial_get_tty_state ((SERIAL_T))
+extern serial_ttystate serial_get_tty_state (struct serial *scb);
/* Set the state of the tty to TTYSTATE. The change is immediate.
When changing to or from raw mode, input might be discarded.
Returns 0 for success, negative value for error (in which case
errno contains the error). */
-extern int serial_set_tty_state (serial_t scb, serial_ttystate ttystate);
-#define SERIAL_SET_TTY_STATE(SERIAL_T, TTYSTATE) serial_set_tty_state ((SERIAL_T), (TTYSTATE))
+extern int serial_set_tty_state (struct serial *scb, serial_ttystate ttystate);
/* printf_filtered a user-comprehensible description of ttystate on
the specified STREAM. FIXME: At present this sends output to the
default stream - GDB_STDOUT. */
-extern void serial_print_tty_state (serial_t scb, serial_ttystate ttystate, struct gdb_file *);
-#define SERIAL_PRINT_TTY_STATE(SERIAL_T, TTYSTATE, STREAM) serial_print_tty_state ((SERIAL_T), (TTYSTATE), (STREAM))
+extern void serial_print_tty_state (struct serial *scb, serial_ttystate ttystate, struct ui_file *);
/* Set the tty state to NEW_TTYSTATE, where OLD_TTYSTATE is the
current state (generally obtained from a recent call to
- SERIAL_GET_TTY_STATE), but be careful not to discard any input.
+ serial_get_tty_state()), but be careful not to discard any input.
This means that we never switch in or out of raw mode, even if
NEW_TTYSTATE specifies a switch. */
-extern int serial_noflush_set_tty_state (serial_t scb, serial_ttystate new_ttystate, serial_ttystate old_ttystate);
-#define SERIAL_NOFLUSH_SET_TTY_STATE(SERIAL_T, NEW_TTYSTATE, OLD_TTYSTATE) \
-serial_noflush_set_tty_state ((SERIAL_T), (NEW_TTYSTATE), (OLD_TTYSTATE))
+extern int serial_noflush_set_tty_state (struct serial *scb, serial_ttystate new_ttystate, serial_ttystate old_ttystate);
/* Set the baudrate to the decimal value supplied. Returns 0 for
success, -1 for failure. */
-extern int serial_setbaudrate (serial_t scb, int rate);
-#define SERIAL_SETBAUDRATE(SERIAL_T, RATE) serial_setbaudrate ((SERIAL_T), (RATE))
+extern int serial_setbaudrate (struct serial *scb, int rate);
/* Set the number of stop bits to the value specified. Returns 0 for
success, -1 for failure. */
#define SERIAL_1_AND_A_HALF_STOPBITS 2 /* 1.5 bits, snicker... */
#define SERIAL_2_STOPBITS 3
-extern int serial_setstopbits (serial_t scb, int num);
-#define SERIAL_SETSTOPBITS(SERIAL_T, NUM) serial_setstopbits ((SERIAL_T), (NUM))
+extern int serial_setstopbits (struct serial *scb, int num);
/* Asynchronous serial interface: */
/* Can the serial device support asynchronous mode? */
-extern int serial_can_async_p (serial_t scb);
-#define SERIAL_CAN_ASYNC_P(SERIAL_T) serial_can_async_p ((SERIAL_T))
+extern int serial_can_async_p (struct serial *scb);
/* Has the serial device been put in asynchronous mode? */
-extern int serial_is_async_p (serial_t scb);
-#define SERIAL_IS_ASYNC_P(SERIAL_T) serial_is_async_p ((SERIAL_T))
+extern int serial_is_async_p (struct serial *scb);
/* For ASYNC enabled devices, register a callback and enable
asynchronous mode. To disable asynchronous mode, register a NULL
callback. */
-typedef void (serial_event_ftype) (serial_t scb, void *context);
-extern void serial_async (serial_t scb, serial_event_ftype *handler, void *context);
-#define SERIAL_ASYNC(SERIAL_T, HANDLER, CONTEXT) serial_async ((SERIAL_T), (HANDLER), (CONTEXT))
+typedef void (serial_event_ftype) (struct serial *scb, void *context);
+extern void serial_async (struct serial *scb, serial_event_ftype *handler, void *context);
/* Provide direct access to the underlying FD (if any) used to
implement the serial device. This interface is clearly
deprecated. Will call internal_error() if the operation isn't
applicable to the current serial device. */
-extern int deprecated_serial_fd (serial_t scb);
-#define DEPRECATED_SERIAL_FD(SERIAL_T) deprecated_serial_fd ((SERIAL_T))
+extern int deprecated_serial_fd (struct serial *scb);
/* Trace/debug mechanism.
- SERIAL_DEBUG() enables/disables internal debugging.
- SERIAL_DEBUG_P() indicates the current debug state. */
+ serial_debug() enables/disables internal debugging.
+ serial_debug_p() indicates the current debug state. */
-extern void serial_debug (serial_t scb, int debug_p);
-#define SERIAL_DEBUG(SERIAL_T, DEBUG_P) serial_debug ((SERIAL_T), (DEBUG_P))
+extern void serial_debug (struct serial *scb, int debug_p);
-extern int serial_debug_p (serial_t scb);
-#define SERIAL_DEBUG_P(SERIAL_T) serial_debug_p ((SERIAL_T))
+extern int serial_debug_p (struct serial *scb);
/* Details of an instance of a serial object */
-struct _serial_t
+struct serial
{
int fd; /* File descriptor */
struct serial_ops *ops; /* Function vector */
still need to wait for this many
more seconds. */
char *name; /* The name of the device or host */
- struct _serial_t *next; /* Pointer to the next serial_t */
+ struct serial *next; /* Pointer to the next `struct serial *' */
int refcnt; /* Number of pointers to this block */
int debug_p; /* Trace this serial devices operation. */
int async_state; /* Async internal state. */
{
char *name;
struct serial_ops *next;
- int (*open) (serial_t, const char *name);
- void (*close) (serial_t);
- int (*readchar) (serial_t, int timeout);
- int (*write) (serial_t, const char *str, int len);
+ int (*open) (struct serial *, const char *name);
+ void (*close) (struct serial *);
+ int (*readchar) (struct serial *, int timeout);
+ int (*write) (struct serial *, const char *str, int len);
/* Discard pending output */
- int (*flush_output) (serial_t);
+ int (*flush_output) (struct serial *);
/* Discard pending input */
- int (*flush_input) (serial_t);
- int (*send_break) (serial_t);
- void (*go_raw) (serial_t);
- serial_ttystate (*get_tty_state) (serial_t);
- int (*set_tty_state) (serial_t, serial_ttystate);
- void (*print_tty_state) (serial_t, serial_ttystate, struct gdb_file *);
- int (*noflush_set_tty_state) (serial_t, serial_ttystate, serial_ttystate);
- int (*setbaudrate) (serial_t, int rate);
- int (*setstopbits) (serial_t, int num);
+ int (*flush_input) (struct serial *);
+ int (*send_break) (struct serial *);
+ void (*go_raw) (struct serial *);
+ serial_ttystate (*get_tty_state) (struct serial *);
+ int (*set_tty_state) (struct serial *, serial_ttystate);
+ void (*print_tty_state) (struct serial *, serial_ttystate,
+ struct ui_file *);
+ int (*noflush_set_tty_state) (struct serial *, serial_ttystate,
+ serial_ttystate);
+ int (*setbaudrate) (struct serial *, int rate);
+ int (*setstopbits) (struct serial *, int num);
/* Wait for output to drain */
- int (*drain_output) (serial_t);
+ int (*drain_output) (struct serial *);
/* Change the serial device into/out of asynchronous mode, call
the specified function when ever there is something
interesting. */
- void (*async) (serial_t scb, int async_p);
+ void (*async) (struct serial *scb, int async_p);
};
/* Add a new serial interface to the interface list */