/* Handle PA64 shared libraries for GDB, the GNU Debugger.
- Copyright (C) 2004, 2007, 2008 Free Software Foundation, Inc.
+ Copyright (C) 2004, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
This file is part of GDB.
#include "gdbcore.h"
#include "target.h"
#include "inferior.h"
+#include "regcache.h"
#include "hppa-tdep.h"
#include "solist.h"
/* We can build this file only when running natively on 64-bit HP/UX.
We check for that by checking for the elf_hp.h header file. */
-#ifdef HAVE_ELF_HP_H
+#if defined(HAVE_ELF_HP_H) && defined(__LP64__)
/* FIXME: kettenis/20041213: These includes should be eliminated. */
#include <dlfcn.h>
static void
pa64_relocate_section_addresses (struct so_list *so,
- struct section_table *sec)
+ struct target_section *sec)
{
asection *asec = sec->the_bfd_section;
CORE_ADDR load_offset;
This must happen after dld starts running, so we can't do it in
read_dynamic_info. Record the fact that we have loaded the
- descriptor. If the library is archive bound, then return zero, else
- return nonzero. */
+ descriptor. If the library is archive bound or the load map
+ hasn't been setup, then return zero; else return nonzero. */
static int
read_dld_descriptor (void)
error (_("Error while reading in load map pointer."));
}
+ if (!dld_cache.load_map)
+ return 0;
+
/* Read in the dld load module descriptor */
if (dlgetmodinfo (-1,
&dld_cache.dld_desc,
Elf64_Dyn *x_dynp = (Elf64_Dyn*)buf;
Elf64_Sxword dyn_tag;
CORE_ADDR dyn_ptr;
- char *pbuf;
- pbuf = alloca (gdbarch_ptr_bit (current_gdbarch) / HOST_CHAR_BIT);
dyn_tag = bfd_h_get_64 (symfile_objfile->obfd,
(bfd_byte*) &x_dynp->d_tag);
to tell the dynamic linker that a private copy of the library is
needed (so GDB can set breakpoints in the library).
- We need to set two flag bits in this routine.
-
- DT_HP_DEBUG_PRIVATE to indicate that shared libraries should be
- mapped private.
-
- DT_HP_DEBUG_CALLBACK to indicate that we want the dynamic linker to
- call the breakpoint routine for significant events. */
+ We need to set DT_HP_DEBUG_CALLBACK to indicate that we want the
+ dynamic linker to call the breakpoint routine for significant events.
+ We used to set DT_HP_DEBUG_PRIVATE to indicate that shared libraries
+ should be mapped private. However, this flag can be set using
+ "chatr +dbg enable". Not setting DT_HP_DEBUG_PRIVATE allows debugging
+ with shared libraries mapped shareable. */
static void
-pa64_solib_create_inferior_hook (void)
+pa64_solib_create_inferior_hook (int from_tty)
{
struct minimal_symbol *msymbol;
unsigned int dld_flags, status;
struct objfile *objfile;
CORE_ADDR anaddr;
- /* First, remove all the solib event breakpoints. Their addresses
- may have changed since the last time we ran the program. */
- remove_solib_event_breakpoints ();
-
if (symfile_objfile == NULL)
return;
if (! read_dynamic_info (shlib_info, &dld_cache))
error (_("Unable to read the .dynamic section."));
+ /* If the libraries were not mapped private, warn the user. */
+ if ((dld_cache.dld_flags & DT_HP_DEBUG_PRIVATE) == 0)
+ warning
+ (_("Private mapping of shared library text was not specified\n"
+ "by the executable; setting a breakpoint in a shared library which\n"
+ "is not privately mapped will not work. See the HP-UX 11i v3 chatr\n"
+ "manpage for methods to privately map shared library text."));
+
/* Turn on the flags we care about. */
- dld_cache.dld_flags |= DT_HP_DEBUG_PRIVATE;
dld_cache.dld_flags |= DT_HP_DEBUG_CALLBACK;
status = target_write_memory (dld_cache.dld_flags_addr,
(char *) &dld_cache.dld_flags,
Also note the breakpoint is the second instruction in the
routine. */
- load_addr = read_pc () - tmp_bfd->start_address;
+ load_addr = regcache_read_pc (get_current_regcache ())
+ - tmp_bfd->start_address;
sym_addr = bfd_lookup_symbol (tmp_bfd, "__dld_break");
sym_addr = load_addr + sym_addr + 4;
/* Create the shared library breakpoint. */
{
struct breakpoint *b
- = create_solib_event_breakpoint (sym_addr);
+ = create_solib_event_breakpoint (target_gdbarch, sym_addr);
/* The breakpoint is actually hard-coded into the dynamic linker,
so we don't need to actually insert a breakpoint instruction
if (! read_dld_descriptor ())
return NULL;
- /* If the libraries were not mapped private, warn the user. */
- if ((dld_cache.dld_flags & DT_HP_DEBUG_PRIVATE) == 0)
- warning (_("The shared libraries were not privately mapped; setting a\n"
- "breakpoint in a shared library will not work until you rerun "
- "the program.\n"));
-
for (dll_index = -1; ; dll_index++)
{
struct load_module_desc dll_desc;
#ifdef SOLIB_PA64_DBG
{
struct load_module_desc *d = &new->lm_info->desc;
+
printf ("\n+ library \"%s\" is described at index %d\n", new->so_name,
dll_index);
- printf (" text_base = 0x%llx\n", d->text_base);
- printf (" text_size = 0x%llx\n", d->text_size);
- printf (" data_base = 0x%llx\n", d->data_base);
- printf (" data_size = 0x%llx\n", d->data_size);
- printf (" unwind_base = 0x%llx\n", d->unwind_base);
- printf (" linkage_ptr = 0x%llx\n", d->linkage_ptr);
- printf (" phdr_base = 0x%llx\n", d->phdr_base);
- printf (" tls_size = 0x%llx\n", d->tls_size);
- printf (" tls_start_addr = 0x%llx\n", d->tls_start_addr);
- printf (" unwind_size = 0x%llx\n", d->unwind_size);
- printf (" tls_index = 0x%llx\n", d->tls_index);
+ printf (" text_base = %s\n", hex_string (d->text_base));
+ printf (" text_size = %s\n", hex_string (d->text_size));
+ printf (" data_base = %s\n", hex_string (d->data_base));
+ printf (" data_size = %s\n", hex_string (d->data_size));
+ printf (" unwind_base = %s\n", hex_string (d->unwind_base));
+ printf (" linkage_ptr = %s\n", hex_string (d->linkage_ptr));
+ printf (" phdr_base = %s\n", hex_string (d->phdr_base));
+ printf (" tls_size = %s\n", hex_string (d->tls_size));
+ printf (" tls_start_addr = %s\n", hex_string (d->tls_start_addr));
+ printf (" unwind_size = %s\n", hex_string (d->unwind_size));
+ printf (" tls_index = %s\n", hex_string (d->tls_index));
}
#endif
char *dll_path;
if (symfile_objfile)
- if (!query ("Attempt to reload symbols from process? "))
+ if (!query (_("Attempt to reload symbols from process? ")))
return 0;
/* Read in the load map pointer if we have not done so already. */
pa64_so_ops.current_sos = pa64_current_sos;
pa64_so_ops.open_symbol_file_object = pa64_open_symbol_file_object;
pa64_so_ops.in_dynsym_resolve_code = pa64_in_dynsym_resolve_code;
+ pa64_so_ops.bfd_open = solib_bfd_open;
memset (&dld_cache, 0, sizeof (dld_cache));
}
void pa64_solib_select (struct gdbarch *gdbarch)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
- set_solib_ops (gdbarch, &pa64_so_ops);
+ set_solib_ops (gdbarch, &pa64_so_ops);
tdep->solib_thread_start_addr = pa64_solib_thread_start_addr;
tdep->solib_get_got_by_pc = pa64_solib_get_got_by_pc;
tdep->solib_get_solib_by_pc = pa64_solib_get_solib_by_pc;