/* Interface between GDB and target environments, including files and processes
- Copyright 1990-1994, 1999, 2000 Free Software Foundation, Inc.
+ Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+ 2000, 2001 Free Software Foundation, Inc.
Contributed by Cygnus Support. Written by John Gilmore.
This file is part of GDB.
#include "bfd.h"
#include "symtab.h"
#include "dcache.h"
+#include "memattr.h"
enum strata
{
TARGET_WAITKIND_IGNORE
};
-/* The numbering of these signals is chosen to match traditional unix
- signals (insofar as various unices use the same numbers, anyway).
- It is also the numbering of the GDB remote protocol. Other remote
- protocols, if they use a different numbering, should make sure to
- translate appropriately.
-
- Since these numbers have actually made it out into other software
- (stubs, etc.), you mustn't disturb the assigned numbering. If you
- need to add new signals here, add them to the end of the explicitly
- numbered signals.
-
- This is based strongly on Unix/POSIX signals for several reasons:
- (1) This set of signals represents a widely-accepted attempt to
- represent events of this sort in a portable fashion, (2) we want a
- signal to make it from wait to child_wait to the user intact, (3) many
- remote protocols use a similar encoding. However, it is
- recognized that this set of signals has limitations (such as not
- distinguishing between various kinds of SIGSEGV, or not
- distinguishing hitting a breakpoint from finishing a single step).
- So in the future we may get around this either by adding additional
- signals for breakpoint, single-step, etc., or by adding signal
- codes; the latter seems more in the spirit of what BSD, System V,
- etc. are doing to address these issues. */
-
-/* For an explanation of what each signal means, see
- target_signal_to_string. */
-
-enum target_signal
- {
- /* Used some places (e.g. stop_signal) to record the concept that
- there is no signal. */
- TARGET_SIGNAL_0 = 0,
- TARGET_SIGNAL_FIRST = 0,
- TARGET_SIGNAL_HUP = 1,
- TARGET_SIGNAL_INT = 2,
- TARGET_SIGNAL_QUIT = 3,
- TARGET_SIGNAL_ILL = 4,
- TARGET_SIGNAL_TRAP = 5,
- TARGET_SIGNAL_ABRT = 6,
- TARGET_SIGNAL_EMT = 7,
- TARGET_SIGNAL_FPE = 8,
- TARGET_SIGNAL_KILL = 9,
- TARGET_SIGNAL_BUS = 10,
- TARGET_SIGNAL_SEGV = 11,
- TARGET_SIGNAL_SYS = 12,
- TARGET_SIGNAL_PIPE = 13,
- TARGET_SIGNAL_ALRM = 14,
- TARGET_SIGNAL_TERM = 15,
- TARGET_SIGNAL_URG = 16,
- TARGET_SIGNAL_STOP = 17,
- TARGET_SIGNAL_TSTP = 18,
- TARGET_SIGNAL_CONT = 19,
- TARGET_SIGNAL_CHLD = 20,
- TARGET_SIGNAL_TTIN = 21,
- TARGET_SIGNAL_TTOU = 22,
- TARGET_SIGNAL_IO = 23,
- TARGET_SIGNAL_XCPU = 24,
- TARGET_SIGNAL_XFSZ = 25,
- TARGET_SIGNAL_VTALRM = 26,
- TARGET_SIGNAL_PROF = 27,
- TARGET_SIGNAL_WINCH = 28,
- TARGET_SIGNAL_LOST = 29,
- TARGET_SIGNAL_USR1 = 30,
- TARGET_SIGNAL_USR2 = 31,
- TARGET_SIGNAL_PWR = 32,
- /* Similar to SIGIO. Perhaps they should have the same number. */
- TARGET_SIGNAL_POLL = 33,
- TARGET_SIGNAL_WIND = 34,
- TARGET_SIGNAL_PHONE = 35,
- TARGET_SIGNAL_WAITING = 36,
- TARGET_SIGNAL_LWP = 37,
- TARGET_SIGNAL_DANGER = 38,
- TARGET_SIGNAL_GRANT = 39,
- TARGET_SIGNAL_RETRACT = 40,
- TARGET_SIGNAL_MSG = 41,
- TARGET_SIGNAL_SOUND = 42,
- TARGET_SIGNAL_SAK = 43,
- TARGET_SIGNAL_PRIO = 44,
- TARGET_SIGNAL_REALTIME_33 = 45,
- TARGET_SIGNAL_REALTIME_34 = 46,
- TARGET_SIGNAL_REALTIME_35 = 47,
- TARGET_SIGNAL_REALTIME_36 = 48,
- TARGET_SIGNAL_REALTIME_37 = 49,
- TARGET_SIGNAL_REALTIME_38 = 50,
- TARGET_SIGNAL_REALTIME_39 = 51,
- TARGET_SIGNAL_REALTIME_40 = 52,
- TARGET_SIGNAL_REALTIME_41 = 53,
- TARGET_SIGNAL_REALTIME_42 = 54,
- TARGET_SIGNAL_REALTIME_43 = 55,
- TARGET_SIGNAL_REALTIME_44 = 56,
- TARGET_SIGNAL_REALTIME_45 = 57,
- TARGET_SIGNAL_REALTIME_46 = 58,
- TARGET_SIGNAL_REALTIME_47 = 59,
- TARGET_SIGNAL_REALTIME_48 = 60,
- TARGET_SIGNAL_REALTIME_49 = 61,
- TARGET_SIGNAL_REALTIME_50 = 62,
- TARGET_SIGNAL_REALTIME_51 = 63,
- TARGET_SIGNAL_REALTIME_52 = 64,
- TARGET_SIGNAL_REALTIME_53 = 65,
- TARGET_SIGNAL_REALTIME_54 = 66,
- TARGET_SIGNAL_REALTIME_55 = 67,
- TARGET_SIGNAL_REALTIME_56 = 68,
- TARGET_SIGNAL_REALTIME_57 = 69,
- TARGET_SIGNAL_REALTIME_58 = 70,
- TARGET_SIGNAL_REALTIME_59 = 71,
- TARGET_SIGNAL_REALTIME_60 = 72,
- TARGET_SIGNAL_REALTIME_61 = 73,
- TARGET_SIGNAL_REALTIME_62 = 74,
- TARGET_SIGNAL_REALTIME_63 = 75,
-
- /* Used internally by Solaris threads. See signal(5) on Solaris. */
- TARGET_SIGNAL_CANCEL = 76,
-
- /* Yes, this pains me, too. But LynxOS didn't have SIG32, and now
- Linux does, and we can't disturb the numbering, since it's part
- of the protocol. Note that in some GDB's TARGET_SIGNAL_REALTIME_32
- is number 76. */
- TARGET_SIGNAL_REALTIME_32,
- /* Yet another pain, IRIX 6 has SIG64. */
- TARGET_SIGNAL_REALTIME_64,
-
-#if defined(MACH) || defined(__MACH__)
- /* Mach exceptions */
- TARGET_EXC_BAD_ACCESS,
- TARGET_EXC_BAD_INSTRUCTION,
- TARGET_EXC_ARITHMETIC,
- TARGET_EXC_EMULATION,
- TARGET_EXC_SOFTWARE,
- TARGET_EXC_BREAKPOINT,
-#endif
- TARGET_SIGNAL_INFO,
-
- /* Some signal we don't know about. */
- TARGET_SIGNAL_UNKNOWN,
-
- /* Use whatever signal we use when one is not specifically specified
- (for passing to proceed and so on). */
- TARGET_SIGNAL_DEFAULT,
-
- /* Last and unused enum value, for sizing arrays, etc. */
- TARGET_SIGNAL_LAST
- };
-
struct target_waitstatus
{
enum target_waitkind kind;
void (*to_require_attach) (char *, int);
void (*to_detach) (char *, int);
void (*to_require_detach) (int, char *, int);
- void (*to_resume) (int, int, enum target_signal);
- int (*to_wait) (int, struct target_waitstatus *);
- void (*to_post_wait) (int, int);
+ void (*to_resume) (ptid_t, int, enum target_signal);
+ ptid_t (*to_wait) (ptid_t, struct target_waitstatus *);
+ void (*to_post_wait) (ptid_t, int);
void (*to_fetch_registers) (int);
void (*to_store_registers) (int);
void (*to_prepare_to_store) (void);
something at MEMADDR + N. */
int (*to_xfer_memory) (CORE_ADDR memaddr, char *myaddr,
- int len, int write, struct target_ops * target);
+ int len, int write,
+ struct mem_attrib *attrib,
+ struct target_ops *target);
#if 0
/* Enable this after 4.12. */
void (*to_load) (char *, int);
int (*to_lookup_symbol) (char *, CORE_ADDR *);
void (*to_create_inferior) (char *, char *, char **);
- void (*to_post_startup_inferior) (int);
+ void (*to_post_startup_inferior) (ptid_t);
void (*to_acknowledge_created_inferior) (int);
void (*to_clone_and_follow_inferior) (int, int *);
void (*to_post_follow_inferior_by_clone) (void);
int (*to_has_exited) (int, int, int *);
void (*to_mourn_inferior) (void);
int (*to_can_run) (void);
- void (*to_notice_signals) (int pid);
- int (*to_thread_alive) (int pid);
+ void (*to_notice_signals) (ptid_t ptid);
+ int (*to_thread_alive) (ptid_t ptid);
void (*to_find_new_threads) (void);
- char *(*to_pid_to_str) (int);
+ char *(*to_pid_to_str) (ptid_t);
char *(*to_extra_thread_info) (struct thread_info *);
void (*to_stop) (void);
int (*to_query) (int /*char */ , char *, char *, int *);
int);
struct exception_event_record *(*to_get_current_exception_event) (void);
char *(*to_pid_to_exec_file) (int pid);
- char *(*to_core_file_to_sym_file) (char *);
enum strata to_stratum;
struct target_ops
*DONT_USE; /* formerly to_next */
#define target_require_detach(pid, args, from_tty) \
(*current_target.to_require_detach) (pid, args, from_tty)
-/* Resume execution of the target process PID. STEP says whether to
+/* Resume execution of the target process PTID. STEP says whether to
single-step or to run free; SIGGNAL is the signal to be given to
the target, or TARGET_SIGNAL_0 for no signal. The caller may not
pass TARGET_SIGNAL_DEFAULT. */
-#define target_resume(pid, step, siggnal) \
+#define target_resume(ptid, step, siggnal) \
do { \
dcache_invalidate(target_dcache); \
- (*current_target.to_resume) (pid, step, siggnal); \
+ (*current_target.to_resume) (ptid, step, siggnal); \
} while (0)
-/* Wait for process pid to do something. Pid = -1 to wait for any pid
+/* Wait for process pid to do something. PTID = -1 to wait for any pid
to do something. Return pid of child, or -1 in case of error;
store status through argument pointer STATUS. Note that it is
*not* OK to return_to_top_level out of target_wait without popping
to the prompt with a debugging target but without the frame cache,
stop_pc, etc., set up. */
-#define target_wait(pid, status) \
- (*current_target.to_wait) (pid, status)
+#define target_wait(ptid, status) \
+ (*current_target.to_wait) (ptid, status)
/* The target_wait operation waits for a process event to occur, and
thereby stop the process.
This operation provides a target-specific hook that allows the
necessary bookkeeping to be performed to track such sequences. */
-#define target_post_wait(pid, status) \
- (*current_target.to_post_wait) (pid, status)
+#define target_post_wait(ptid, status) \
+ (*current_target.to_post_wait) (ptid, status)
-/* Fetch register REGNO, or all regs if regno == -1. No result. */
+/* Fetch at least register REGNO, or all regs if regno == -1. No result. */
#define target_fetch_registers(regno) \
(*current_target.to_fetch_registers) (regno)
extern DCACHE *target_dcache;
-extern int do_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int write);
+extern int do_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int write,
+ struct mem_attrib *attrib);
extern int target_read_string (CORE_ADDR, char **, int, int *);
extern int target_write_memory (CORE_ADDR memaddr, char *myaddr, int len);
-extern int xfer_memory (CORE_ADDR, char *, int, int, struct target_ops *);
+extern int xfer_memory (CORE_ADDR, char *, int, int,
+ struct mem_attrib *, struct target_ops *);
-extern int
-child_xfer_memory (CORE_ADDR, char *, int, int, struct target_ops *);
+extern int child_xfer_memory (CORE_ADDR, char *, int, int,
+ struct mem_attrib *, struct target_ops *);
/* Make a single attempt at transfering LEN bytes. On a successful
transfer, the number of bytes actually transfered is returned and
extern void child_post_attach (int);
#endif
-extern void child_post_wait (int, int);
+extern void child_post_wait (ptid_t, int);
-extern void child_post_startup_inferior (int);
+extern void child_post_startup_inferior (ptid_t);
extern void child_acknowledge_created_inferior (int);
extern int child_has_exited (int, int, int *);
-extern int child_thread_alive (int);
+extern int child_thread_alive (ptid_t);
/* From exec.c */
#define target_lookup_symbol(name, addrp) \
(*current_target.to_lookup_symbol) (name, addrp)
-/* Start an inferior process and set inferior_pid to its pid.
+/* Start an inferior process and set inferior_ptid to its pid.
EXEC_FILE is the file to run.
ALLARGS is a string containing the arguments to the program.
ENV is the environment vector to pass. Errors reported with error().
Such targets will supply an appropriate definition for this function. */
-#define target_post_startup_inferior(pid) \
- (*current_target.to_post_startup_inferior) (pid)
+#define target_post_startup_inferior(ptid) \
+ (*current_target.to_post_startup_inferior) (ptid)
/* On some targets, the sequence of starting up an inferior requires
some synchronization between gdb and the new inferior process, PID. */
/* post process changes to signal handling in the inferior. */
-#define target_notice_signals(pid) \
- (*current_target.to_notice_signals) (pid)
+#define target_notice_signals(ptid) \
+ (*current_target.to_notice_signals) (ptid)
/* Check to see if a thread is still alive. */
-#define target_thread_alive(pid) \
- (*current_target.to_thread_alive) (pid)
+#define target_thread_alive(ptid) \
+ (*current_target.to_thread_alive) (ptid)
/* Query for new threads and add them to the thread list. */
#ifndef target_tid_to_str
#define target_tid_to_str(PID) \
target_pid_to_str (PID)
-extern char *normal_pid_to_str (int pid);
+extern char *normal_pid_to_str (ptid_t ptid);
#endif
/* Return a short string describing extra information about PID,
#if !defined(TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT)
#define TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT(byte_count) \
- (LONGEST)(byte_count) <= REGISTER_SIZE
+ ((LONGEST)(byte_count) <= REGISTER_SIZE)
#endif
/* However, some addresses may not be profitable to use hardware to watch,
\f
/* Imported from machine dependent code */
-#ifndef SOFTWARE_SINGLE_STEP_P
-#define SOFTWARE_SINGLE_STEP_P 0
-#define SOFTWARE_SINGLE_STEP(sig,bp_p) \
- (internal_error ("SOFTWARE_SINGLE_STEP"), 0)
-#endif /* SOFTWARE_SINGLE_STEP_P */
-
/* Blank target vector entries are initialized to target_ignore. */
void target_ignore (void);
-/* Macro for getting target's idea of a frame pointer.
- FIXME: GDB's whole scheme for dealing with "frames" and
- "frame pointers" needs a serious shakedown. */
-#ifndef TARGET_VIRTUAL_FRAME_POINTER
-#define TARGET_VIRTUAL_FRAME_POINTER(ADDR, REGP, OFFP) \
- do { *(REGP) = FP_REGNUM; *(OFFP) = 0; } while (0)
-#endif /* TARGET_VIRTUAL_FRAME_POINTER */
-
#endif /* !defined (TARGET_H) */
projects / binutils-gdb.git / blobdiff