* coffread.c: Replace all occurrences of bfd_read with bfd_bread.

[binutils-gdb.git] / gdb / testsuite / configure

diff --git a/gdb/testsuite/configure b/gdb/testsuite/configure
index 55d286a0a713286464b31caea58a3dab16fea9a8..ba66f400d8949304904b402ec5ea1ace4dc76933 100755 (executable)
--- a/gdb/testsuite/configure
+++ b/gdb/testsuite/configure
@@ -1,7 +1,7 @@
 #! /bin/sh
 
 # Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.12.2 
+# Generated automatically using autoconf version 2.13 
 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
 #
 # This configure script is free software; the Free Software Foundation
@@ -32,6 +32,7 @@ program_suffix=NONE
 program_transform_name=s,x,x,
 silent=
 site=
+sitefile=
 srcdir=
 target=NONE
 verbose=
@@ -146,6 +147,7 @@ Configuration:
   --help                  print this message
   --no-create             do not create output files
   --quiet, --silent       do not print \`checking...' messages
+  --site-file=FILE        use FILE as the site file
   --version               print the version of autoconf that created configure
 Directory and file names:
   --prefix=PREFIX         install architecture-independent files in PREFIX
@@ -316,6 +318,11 @@ EOF
   -site=* | --site=* | --sit=*)
     site="$ac_optarg" ;;
 
+  -site-file | --site-file | --site-fil | --site-fi | --site-f)
+    ac_prev=sitefile ;;
+  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
+    sitefile="$ac_optarg" ;;
+
   -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
     ac_prev=srcdir ;;
   -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
@@ -337,7 +344,7 @@ EOF
     verbose=yes ;;
 
   -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.12.2"
+    echo "configure generated by autoconf version 2.13"
     exit 0 ;;
 
   -with-* | --with-*)
@@ -481,12 +488,16 @@ fi
 srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
 
 # Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
-  if test "x$prefix" != xNONE; then
-    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-  else
-    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+if test -z "$sitefile"; then
+  if test -z "$CONFIG_SITE"; then
+    if test "x$prefix" != xNONE; then
+      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+    else
+      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+    fi
   fi
+else
+  CONFIG_SITE="$sitefile"
 fi
 for ac_site_file in $CONFIG_SITE; do
   if test -r "$ac_site_file"; then
@@ -575,7 +586,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:579: checking host system type" >&5
+echo "configure:590: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
@@ -596,7 +607,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$host" 1>&6
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:600: checking target system type" >&5
+echo "configure:611: checking target system type" >&5
 
 target_alias=$target
 case "$target_alias" in
@@ -614,7 +625,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$target" 1>&6
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:618: checking build system type" >&5
+echo "configure:629: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -638,7 +649,16 @@ test "$host_alias" != "$target_alias" &&
 
 
 # Directories to use in all configurations.
-configdirs="gdb.asm gdb.base gdb.c++ gdb.disasm gdb.chill gdb.threads"
+configdirs="gdb.asm \
+            gdb.base \
+            gdb.c++ \
+            gdb.java \
+            gdb.disasm \
+            gdb.chill \
+            gdb.mi \
+            gdb.threads \
+            gdb.trace"
+
 
 # Directories to use for a configuration which uses stabs.
 stabsdirs="gdb.stabs"
@@ -660,6 +680,16 @@ case "${target}" in
                        fi ;;
 esac
 
+# Directory with HP specific tests. They will run only with HP's compilers. 
+# These tests will not work on other platforms and compilers.
+
+hpdir="gdb.hp"
+
+case "${target}" in
+ hppa*-*-hpux*) configdirs="${configdirs} ${hpdir}" ;;
+esac
+
+
 # Begin stuff to support --enable-shared
 # Check whether --enable-shared or --disable-shared was given.
 if test "${enable_shared+set}" = set; then
@@ -681,6 +711,7 @@ if test "${shared}" = "true"; then
 fi
 
 # End stuff to support --enable-shared
+# Start stuff to support --enable-gdbtk
 # Check whether --enable-gdbtk or --disable-gdbtk was given.
 if test "${enable_gdbtk+set}" = set; then
   enableval="$enable_gdbtk"
@@ -715,9 +746,103 @@ fi
 if test "${enable_gdbtk}" = "yes"; then
     configdirs="${configdirs} gdb.gdbtk"
 fi
-# End stuff to suppot --enable-shared
-# start-sanitize-gdbtk
-# Begin stuff to support --enable-gdbtk
+# End stuff to support --enable-shared
+
+echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
+echo "configure:753: checking for Cygwin environment" >&5
+if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 758 "configure"
+#include "confdefs.h"
+
+int main() {
+
+#ifndef __CYGWIN__
+#define __CYGWIN__ __CYGWIN32__
+#endif
+return __CYGWIN__;
+; return 0; }
+EOF
+if { (eval echo configure:769: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv_cygwin=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_cygwin=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_cygwin" 1>&6
+CYGWIN=
+test "$ac_cv_cygwin" = yes && CYGWIN=yes
+echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
+echo "configure:786: checking for mingw32 environment" >&5
+if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 791 "configure"
+#include "confdefs.h"
+
+int main() {
+return __MINGW32__;
+; return 0; }
+EOF
+if { (eval echo configure:798: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv_mingw32=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_mingw32=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_mingw32" 1>&6
+MINGW32=
+test "$ac_cv_mingw32" = yes && MINGW32=yes
+
+
+echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
+echo "configure:817: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
+  ac_cv_exeext=.exe
+else
+  rm -f conftest*
+  echo 'int main () { return 0; }' > conftest.$ac_ext
+  ac_cv_exeext=
+  if { (eval echo configure:827: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+    for file in conftest.*; do
+      case $file in
+      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
+      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
+      esac
+    done
+  else
+    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
+  fi
+  rm -f conftest*
+  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
+fi
+fi
+
+EXEEXT=""
+test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
+echo "$ac_t""${ac_cv_exeext}" 1>&6
+ac_exeext=$EXEEXT
+
 
 # configure the subdirectories too
 subdirs="$configdirs"
@@ -746,7 +871,7 @@ EOF
 # Ultrix sh set writes to stderr and can't be redirected directly,
 # and sets the high bit in the cache file unless we assign to the vars.
 (set) 2>&1 |
-  case `(ac_space=' '; set) 2>&1 | grep ac_space` in
+  case `(ac_space=' '; set | grep ac_space) 2>&1` in
   *ac_space=\ *)
     # `set' does not quote correctly, so add quotes (double-quote substitution
     # turns \\\\ into \\, and sed turns \\ into \).
@@ -825,7 +950,7 @@ do
     echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
     exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
   -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.12.2"
+    echo "$CONFIG_STATUS generated by autoconf version 2.13"
     exit 0 ;;
   -help | --help | --hel | --he | --h)
     echo "\$ac_cs_usage"; exit 0 ;;
@@ -848,6 +973,7 @@ s%@SHELL@%$SHELL%g
 s%@CFLAGS@%$CFLAGS%g
 s%@CPPFLAGS@%$CPPFLAGS%g
 s%@CXXFLAGS@%$CXXFLAGS%g
+s%@FFLAGS@%$FFLAGS%g
 s%@DEFS@%$DEFS%g
 s%@LDFLAGS@%$LDFLAGS%g
 s%@LIBS@%$LIBS%g
@@ -883,6 +1009,7 @@ s%@build_cpu@%$build_cpu%g
 s%@build_vendor@%$build_vendor%g
 s%@build_os@%$build_os%g
 s%@RPATH_ENVVAR@%$RPATH_ENVVAR%g
+s%@EXEEXT@%$EXEEXT%g
 s%@subdirs@%$subdirs%g
 
 CEOF